2010-Mar-31 19:05:36 BEGIN executive: CIMA executive starting ... 2010-Mar-31 19:05:36 NOTE executive: STARTING NEW CIMA SESSION 2010-Mar-31 19:05:36 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Mar-31 19:05:36 INFO4 executive: This is an ON-LINE session 2010-Mar-31 19:05:36 INFO4 executive: This is a REMOTE session 2010-Mar-31 19:05:36 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Mar-31 19:05:36 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Greg Hallenbeck' 2010-Mar-31 19:05:36 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100331' 2010-Mar-31 19:05:37 LOG2 log_preferences: Currently applied preferences: 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(dailylog) = daily 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(datawindow) = open 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(logcolours) = full 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(displayformat) = long 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(logformat) = new 2010-Mar-31 19:05:37 LOG2 log_preferences: prefs(fontsize) = 3 2010-Mar-31 19:05:37 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Mar-31 19:05:37 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Mar-31 19:05:37 ALERT executive: CIMA executive ready 2010-Mar-31 19:05:39 NOTE frontend: CIMA frontend ready 2010-Mar-31 19:05:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:05:41 LOG4 got_cormsg: From DATATAKING: setup 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Mar-31 19:05:47 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Mar-31 19:05:47 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:05:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:05:57 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Mar-31 19:05:57 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Mar-31 19:05:57 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Mar-31 19:05:57 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Mar-31 19:05:57 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Mar-31 19:05:57 NOTE select_receiver: Starting to select receiver ALFA 2010-Mar-31 19:05:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Mar-31 19:05:57 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Mar-31 19:05:57 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Mar-31 19:05:57 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Mar-31 19:05:57 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Mar-31 19:05:57 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Mar-31 19:05:57 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Mar-31 19:05:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:05:57 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Mar-31 19:05:57 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Mar-31 19:05:57 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Mar-31 19:05:57 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Mar-31 19:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:07:12 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Mar-31 19:07:12 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Mar-31 19:07:12 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Mar-31 19:07:12 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Mar-31 19:07:12 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Mar-31 19:07:12 NOTE restart_wapp: Restarting all WAPPs 2010-Mar-31 19:07:12 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Mar-31 19:07:13 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Mar-31 19:07:13 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Mar-31 19:07:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Mar-31 19:07:17 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Mar-31 19:07:17 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Mar-31 19:07:18 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Mar-31 19:07:18 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Mar-31 19:07:50 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az265_2010.conf' 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Mar-31 19:07:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Mar-31 19:07:52 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Mar-31 19:07:52 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Mar-31 19:07:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Mar-31 19:07:53 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Mar-31 19:07:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Mar-31 19:07:53 INFO1 config_iflo: Selecting receiver ALFA 2010-Mar-31 19:07:53 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Mar-31 19:07:53 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Mar-31 19:07:53 START begin_task: Starting task 'selecting receiver ALFA' 2010-Mar-31 19:07:53 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 NOTE select_receiver: Starting to select receiver ALFA 2010-Mar-31 19:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Mar-31 19:07:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Mar-31 19:07:53 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Mar-31 19:07:53 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Mar-31 19:07:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:07:53 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Mar-31 19:07:53 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Mar-31 19:07:53 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Mar-31 19:07:53 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Mar-31 19:07:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Mar-31 19:07:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:07:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:07:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:07:53 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:07:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:07:53 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:07:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Mar-31 19:07:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Mar-31 19:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Mar-31 19:07:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Mar-31 19:07:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:07:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Mar-31 19:07:53 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Mar-31 19:07:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:08:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Mar-31 19:08:09 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Mar-31 19:08:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Mar-31 19:08:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Mar-31 19:08:09 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Mar-31 19:08:09 DONE finish_task: DONE finished configuration: IF/LO path 2010-Mar-31 19:08:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:08:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Mar-31 19:08:09 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Mar-31 19:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Mar-31 19:08:10 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Mar-31 19:08:10 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Mar-31 19:08:10 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Mar-31 19:08:10 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Mar-31 19:08:10 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Mar-31 19:08:10 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Mar-31 19:08:10 START begin_task: Starting task 'selecting calibration port' 2010-Mar-31 19:08:10 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG3 vw_send: To DATATAKING: calport 3 2010-Mar-31 19:08:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Mar-31 19:08:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:08:10 START begin_task: Starting task 'waiting on calport' 2010-Mar-31 19:08:10 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Mar-31 19:08:10 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Mar-31 19:08:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:08:10 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Mar-31 19:08:10 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Mar-31 19:08:10 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Mar-31 19:08:10 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 19:08:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 19:08:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:08:10 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:08:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:08:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:08:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:08:10 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Mar-31 19:08:10 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Mar-31 19:08:10 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Mar-31 19:08:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Mar-31 19:08:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Mar-31 19:08:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Mar-31 19:08:11 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Mar-31 19:08:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:08:11 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Mar-31 19:08:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:08:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:08:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:08:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:08:11 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:08:11 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Mar-31 19:08:11 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Mar-31 19:08:11 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Mar-31 19:08:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:08:11 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Mar-31 19:08:11 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Mar-31 19:08:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:08:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Mar-31 19:08:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Mar-31 19:08:11 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Mar-31 19:08:11 LOG4 exec_msg: From OBSERVER: rotate_alfa -65.0 nowait 2010-Mar-31 19:08:11 BEGIN begin_task: Starting task 'rotate ALFA to -65 degrees' 2010-Mar-31 19:08:11 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Mar-31 19:08:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65 degrees ...} 2010-Mar-31 19:08:12 INFO2 rotate_alfa: ALFA commanded to -65.0 degrees 2010-Mar-31 19:08:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.0 REPLY 2010-Mar-31 19:08:12 STOP finish_task: Finishing task 'rotate ALFA to -65 degrees' 2010-Mar-31 19:08:12 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Mar-31 19:08:12 DONE finish_task: DONE finished configuration: rotating ALFA to -65 degrees 2010-Mar-31 19:08:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:08:12 END end_task: Finishing task 'rotate ALFA to -65 degrees' with status 'OK' 2010-Mar-31 19:08:12 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Mar-31 19:08:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:08:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0000.fits 2010-Mar-31 19:08:12 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100331.a2010.0000.fits} 2010-Mar-31 19:08:13 NOTE CIMA-load_config_file: Configuration file 'a2010_az265_2010.conf' applied. 2010-Mar-31 19:09:28 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Mar-31 19:09:28 LOG4 exec_msg: From OBSERVER: rotate_alfa -63.1 nowait 2010-Mar-31 19:09:28 BEGIN begin_task: Starting task 'rotate ALFA to -63.1 degrees' 2010-Mar-31 19:09:28 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Mar-31 19:09:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -63.1 degrees ...} 2010-Mar-31 19:09:28 INFO2 rotate_alfa: ALFA commanded to -63.1 degrees 2010-Mar-31 19:09:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -63.1 REPLY 2010-Mar-31 19:09:28 STOP finish_task: Finishing task 'rotate ALFA to -63.1 degrees' 2010-Mar-31 19:09:28 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Mar-31 19:09:28 DONE finish_task: DONE finished configuration: rotating ALFA to -63.1 degrees 2010-Mar-31 19:09:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:09:28 END end_task: Finishing task 'rotate ALFA to -63.1 degrees' with status 'OK' 2010-Mar-31 19:09:28 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Mar-31 19:09:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Mar-31 19:09:31 INFO3 alfa_motor: ALFA rotator in-position -63.10 degrees 2010-Mar-31 19:11:35 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Mar-31 19:11:35 LOG4 exec_msg: From OBSERVER: track_new_source drift80p1 072500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Mar-31 19:11:35 LOG1 track_new_source: Calling 'track_new_source drift80p1 072500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Mar-31 19:11:35 BEGIN begin_task: Starting task 'selecting new source' 2010-Mar-31 19:11:35 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift80p1} INFO {Selecting source 'drift80p1' ...} 2010-Mar-31 19:11:35 LOG3 track_source: Calling 'track_source drift80p1 072500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Mar-31 19:11:35 START begin_task: Starting task 'sending tracking commands' 2010-Mar-31 19:11:35 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift80p1} INFO {Slewing to source 'drift80p1' ...} 2010-Mar-31 19:11:35 INFO1 track_source: Starting to track drift80p1 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: set ra 072500.0 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: set dec +192042 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: pnt tr 072500.0 +192042 -CJ 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:11:35 STOP finish_task: Finishing task 'sending tracking commands' 2010-Mar-31 19:11:35 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 INFO2 finish_task: DONE finished sending: tracking commands 2010-Mar-31 19:11:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:11:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Mar-31 19:11:35 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Mar-31 19:11:35 START begin_task: Starting task 'applying pointing corrections' 2010-Mar-31 19:11:35 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Mar-31 19:11:35 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Mar-31 19:11:35 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Mar-31 19:11:35 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Mar-31 19:11:35 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Mar-31 19:11:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:11:36 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Mar-31 19:11:36 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Mar-31 19:11:36 STOP finish_task: Finishing task 'selecting new source' 2010-Mar-31 19:11:36 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Mar-31 19:11:36 DONE finish_task: DONE finished selecting: new source 2010-Mar-31 19:11:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:11:36 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Mar-31 19:11:36 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: set ra 072500.0 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: set dec +192042 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% 072500.0 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% +192042 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: pnt tr 072500.0 +192042 -CJ 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Mar-31 19:11:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:12:22 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Mar-31 19:12:22 LOG4 exec_msg: From OBSERVER: track_new_source drift80p1 075500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Mar-31 19:12:22 LOG1 track_new_source: Calling 'track_new_source drift80p1 075500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Mar-31 19:12:22 BEGIN begin_task: Starting task 'selecting new source' 2010-Mar-31 19:12:22 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2010-Mar-31 19:12:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift80p1} INFO {Selecting source 'drift80p1' ...} 2010-Mar-31 19:12:22 LOG3 track_source: Calling 'track_source drift80p1 075500.0 +192042 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Mar-31 19:12:22 START begin_task: Starting task 'sending tracking commands' 2010-Mar-31 19:12:22 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Mar-31 19:12:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift80p1} INFO {Slewing to source 'drift80p1' ...} 2010-Mar-31 19:12:22 INFO1 track_source: Starting to track drift80p1 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: set ra 075500.0 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: set dec +192042 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: pnt tr 075500.0 +192042 -CJ 2010-Mar-31 19:12:22 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:12:22 STOP finish_task: Finishing task 'sending tracking commands' 2010-Mar-31 19:12:22 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Mar-31 19:12:22 INFO2 finish_task: DONE finished sending: tracking commands 2010-Mar-31 19:12:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:12:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Mar-31 19:12:23 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Mar-31 19:12:23 START begin_task: Starting task 'applying pointing corrections' 2010-Mar-31 19:12:23 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Mar-31 19:12:23 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Mar-31 19:12:23 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Mar-31 19:12:23 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Mar-31 19:12:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:12:23 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Mar-31 19:12:23 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 STOP finish_task: Finishing task 'selecting new source' 2010-Mar-31 19:12:23 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 DONE finish_task: DONE finished selecting: new source 2010-Mar-31 19:12:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:12:23 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Mar-31 19:12:23 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: set ra 075500.0 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: set dec +192042 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% 075500.0 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% +192042 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: pnt tr 075500.0 +192042 -CJ 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Mar-31 19:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:13:34 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Mar-31 19:13:34 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Mar-31 19:13:34 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Mar-31 19:13:34 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2010-Mar-31 19:13:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Mar-31 19:13:34 INFO2 adjust_power: Starting to adjust WAPP power 2010-Mar-31 19:13:34 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Mar-31 19:13:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Mar-31 19:13:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:13:34 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Mar-31 19:13:34 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Mar-31 19:13:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Mar-31 19:13:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:13:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:13:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Mar-31 19:13:38 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Mar-31 19:13:38 START begin_task: Starting task 'adjusting WAPP power' 2010-Mar-31 19:13:38 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Mar-31 19:13:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:13:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:13:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:13:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:13:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Mar-31 19:13:38 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:13:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Mar-31 19:13:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2010-Mar-31 19:13:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-Mar-31 19:13:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2010-Mar-31 19:13:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Mar-31 19:13:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Mar-31 19:13:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Mar-31 19:13:38 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.925 1.111 ALFA beam 1: 0.974 0.951 2010-Mar-31 19:13:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.010 1.083 ALFA beam 3: 1.056 0.933 2010-Mar-31 19:13:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.051 0.818 ALFA beam 5: 1.127 0.959 2010-Mar-31 19:13:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.897 0.865 ALFA beam 7: 0.973 1.007 2010-Mar-31 19:13:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Mar-31 19:13:38 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Mar-31 19:13:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:13:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Mar-31 19:13:38 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Mar-31 19:13:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Mar-31 19:13:38 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2010-Mar-31 19:13:38 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Mar-31 19:13:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Mar-31 19:13:38 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Mar-31 19:13:38 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Mar-31 19:13:43 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 260.62 -63.1 hcorcal 1 loopend-ON no off lcorcal first 1 drift80p1 075500.0 +192042 J 0 Topocentric velocity(optical) 2010-Mar-31 19:13:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 260.62 -63.1 hcorcal 1 loopend-ON no off lcorcal first 1 drift80p1 075500.0 +192042 J 0 Topocentric velocity(optical)' 2010-Mar-31 19:13:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Mar-31 19:13:43 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift80p1' 2010-Mar-31 19:13:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Mar-31 19:13:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift80p1} 2010-Mar-31 19:13:43 INFO5 fixed_driftmap: Start: year = 2010.2486000836566 RA = 07:55:37.2 Dec = +19:19:01.2 2010-Mar-31 19:13:43 NOTE fixed_driftmap: Setting ZA to 6:42:22.8 ... 2010-Mar-31 19:13:43 INFO3 fixed_driftmap: Sending telescope to Az = 260.62 and ZA = 6.71 2010-Mar-31 19:13:43 LOG3 track_source: Calling 'track_source drift80p1 260.62 6.7063420982 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Mar-31 19:13:43 START begin_task: Starting task 'sending tracking commands' 2010-Mar-31 19:13:43 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift80p1} INFO {Slewing to source 'drift80p1' ...} 2010-Mar-31 19:13:43 INFO1 track_source: Starting to track drift80p1 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: set ra 260.62 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: set dec 6.7063420982 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: pnt tr 260.62 6.7063420982 -CF 2010-Mar-31 19:13:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:13:43 STOP finish_task: Finishing task 'sending tracking commands' 2010-Mar-31 19:13:43 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 INFO2 finish_task: DONE finished sending: tracking commands 2010-Mar-31 19:13:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:13:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Mar-31 19:13:43 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 START begin_task: Starting task 'rotate ALFA to -63.1 degrees' 2010-Mar-31 19:13:43 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -63.1 degrees ...} 2010-Mar-31 19:13:43 INFO2 rotate_alfa: ALFA commanded to -63.1 degrees 2010-Mar-31 19:13:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION -63.1 REPLY 2010-Mar-31 19:13:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Mar-31 19:13:43 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Mar-31 19:13:43 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift80p1" 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: set ra 260.62 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: set dec 6.7063420982 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: vw% 260.62 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: vw% 6.7063420982 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: pnt tr 260.62 6.7063420982 -CF 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Mar-31 19:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:13:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Mar-31 19:13:44 INFO3 alfa_motor: ALFA rotator in-position -63.10 degrees 2010-Mar-31 19:13:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Mar-31 19:13:44 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Mar-31 19:13:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Mar-31 19:13:44 STOP finish_task: Finishing task 'rotate ALFA to -63.1 degrees' 2010-Mar-31 19:13:44 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2010-Mar-31 19:13:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to -63.1 degrees 2010-Mar-31 19:13:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:13:44 STOP end_task: Finishing task 'rotate ALFA to -63.1 degrees' with status 'OK' 2010-Mar-31 19:13:44 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2010-Mar-31 19:13:44 START begin_task: Starting task 'waiting on telescope' 2010-Mar-31 19:13:44 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Mar-31 19:13:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Mar-31 19:13:44 LOG3 waittrk: Start waittrk 5 2010-Mar-31 19:13:44 START begin_task: Starting task 'waiting on telescope movement' 2010-Mar-31 19:13:44 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Mar-31 19:13:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Mar-31 19:13:49 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Mar-31 19:13:49 START begin_task: Starting task 'waiting on telescope on source' 2010-Mar-31 19:13:49 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Mar-31 19:14:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Mar-31 19:14:10 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Mar-31 19:14:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Mar-31 19:14:10 INFO2 waittrk: Now tracking drift80p1 2010-Mar-31 19:14:11 LOG4 waittrk: Current telescope position: Az = 260.04 ZA = 6.70 2010-Mar-31 19:14:11 STOP finish_task: Finishing task 'waiting on telescope' 2010-Mar-31 19:14:11 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Mar-31 19:14:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:14:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Mar-31 19:14:11 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 19:14:11 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 19:14:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 19:14:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:14:11 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 19:14:11 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 19:14:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:14:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:14:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 19:14:11 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 19:14:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:14:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 19:14:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:14:11 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:14:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:14:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:14:11 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:14:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 19:14:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:14:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:14:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:14:11 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:14:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:14:11 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:14:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:14:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 19:14:11 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Mar-31 19:14:11 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Mar-31 19:14:11 INFO2 astwait: Waiting for 152 seconds from 23:14:11 to 23:16:43 UTC ... 2010-Mar-31 19:14:11 LOG4 send_obs_status: To obs_status: <1> TASKTIME 152 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Mar-31 19:14:11 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Mar-31 19:14:11 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Mar-31 19:16:43 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Mar-31 19:16:43 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Mar-31 19:16:43 INFO3 astwait: Finished waiting 2010-Mar-31 19:16:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Mar-31 19:16:43 LOG5 dopset_later: Calling 'dopset_later 60.780003597549801' 2010-Mar-31 19:16:43 INFO3 dopset_later: Setting Doppler correction for 19:17:43 (60.8 seconds from now) 2010-Mar-31 19:16:43 LOG5 antvel: Calling 'antvel 260.620000 6.706342 F Topocentric 60.780003597549801' 2010-Mar-31 19:16:43 LOG2 antvel: Transforming current Az = 260.62 ZA = 6.71 to apparent RA = 07:55:37.1 Dec = +19:19:01.2 2010-Mar-31 19:16:43 LOG2 antvel: Parameters to Doppler: Topocentric 83863 2010 90 0.0 2010-Mar-31 19:16:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Mar-31 19:16:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Mar-31 19:16:43 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Mar-31 19:16:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Mar-31 19:16:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Mar-31 19:16:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Mar-31 19:16:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Mar-31 19:16:43 START begin_task: Starting task 'adjusting WAPP power' 2010-Mar-31 19:16:43 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-Mar-31 19:16:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Mar-31 19:16:43 INFO2 adjust_power: Starting to adjust WAPP power 2010-Mar-31 19:16:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Mar-31 19:16:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Mar-31 19:16:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:16:43 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Mar-31 19:16:43 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:16:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:16:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:16:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Mar-31 19:16:44 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Mar-31 19:16:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Mar-31 19:16:44 START begin_task: Starting task 'adjusting WAPP power' 2010-Mar-31 19:16:44 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Mar-31 19:16:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Mar-31 19:16:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:16:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:16:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:16:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Mar-31 19:16:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Mar-31 19:16:44 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Mar-31 19:16:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Mar-31 19:16:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:16:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2010-Mar-31 19:16:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-Mar-31 19:16:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2010-Mar-31 19:16:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Mar-31 19:16:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Mar-31 19:16:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Mar-31 19:16:45 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Mar-31 19:16:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.940 1.105 ALFA beam 1: 0.966 0.941 2010-Mar-31 19:16:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.000 1.101 ALFA beam 3: 1.072 0.945 2010-Mar-31 19:16:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.062 0.832 ALFA beam 5: 1.110 0.949 2010-Mar-31 19:16:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.904 0.869 ALFA beam 7: 0.970 1.009 2010-Mar-31 19:16:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Mar-31 19:16:45 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Mar-31 19:16:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Mar-31 19:16:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:16:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Mar-31 19:16:45 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Mar-31 19:16:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 19:16:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Mar-31 19:16:45 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-Mar-31 19:16:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Mar-31 19:16:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:16:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Mar-31 19:16:45 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-Mar-31 19:16:45 LOG1 fixed_driftmap: Parameters: HA = -00:28:03.1 Start = 07:27:34.2 LST = 07:26:36.2 diff = 57.9 secs 2010-Mar-31 19:16:45 INFO2 fixed_driftmap: Waiting 55.9 seconds for RA 7:55:37 2010-Mar-31 19:16:45 INFO2 lstwait: Waiting for 55.8 secs from LST 07:26:36 to LST 07:27:32 ... 2010-Mar-31 19:16:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.787671979948186 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Mar-31 19:16:45 START begin_task: Starting task 'waiting on wait on LST' 2010-Mar-31 19:16:45 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Mar-31 19:17:00 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:17:00.298 (seconds: 69420.298)!} 2010-Mar-31 19:17:00 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:17:00.298 (seconds: 69420.298)! 2010-Mar-31 19:17:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Mar-31 19:17:41 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Mar-31 19:17:41 LOG4 lstwait: Finished waiting 0.21 seconds late 2010-Mar-31 19:17:41 INFO3 lstwait: Finished waiting 2010-Mar-31 19:17:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Mar-31 19:17:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:17:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:17:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:17:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:17:41 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100331.a2010.0000.fits' is empty! 2010-Mar-31 19:17:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Mar-31 19:17:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Mar-31 19:17:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 19:17:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 19:17:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:17:41 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2010-Mar-31 19:17:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 19:17:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:17:41 INFO2 take_data: Starting WAPP 600-second scan: 9000060 2010-Mar-31 19:17:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:17:42 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Mar-31 19:17:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:17:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:17:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 19:17:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83863.00 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:17:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 19:27:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.126 0.969 0.942 2010-Mar-31 19:27:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.095 1.069 0.947 2010-Mar-31 19:27:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.837 1.113 0.962 2010-Mar-31 19:27:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.871 0.971 1.011 2010-Mar-31 19:27:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.768 and 1.123 2010-Mar-31 19:27:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:27:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:27:43 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:27:43 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 LOG1 fixed_driftmap: New position: year = 2010.2486267333384 RA = 08:05:02.9 RA/Dec = 08:05:40.1 +19:18:53.0 2010-Mar-31 19:27:43 NOTE fixed_driftmap: Correcting ZA to 6:41:16.7 ... 2010-Mar-31 19:27:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6879832824 -CF 2010-Mar-31 19:27:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 19:27:43 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 19:27:43 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 19:27:43 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 19:27:43 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 19:27:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 19:27:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:27:43 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 19:27:43 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6879832824 -CF 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:27:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:27:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 19:27:43 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Mar-31 19:27:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 19:27:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:27:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 19:27:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:27:43 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:27:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:27:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:27:44 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:27:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 19:27:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:27:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:27:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:27:44 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:27:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:27:44 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:27:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:27:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 19:27:44 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 19:27:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 19:27:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 19:27:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:27:44 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:27:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 19:27:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:27:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:27:44 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 19:27:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:27:44 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 19:27:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:27:44 INFO2 take_data: Starting WAPP 1-second scan: 9000061 2010-Mar-31 19:27:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:27:44 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Mar-31 19:27:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:27:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 19:27:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84465.00 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:27:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:27:46 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:27:46 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 19:27:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 19:27:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 19:27:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:27:46 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:27:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:27:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:27:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:27:46 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 19:27:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 19:27:46 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 19:27:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:27:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 19:27:46 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Mar-31 19:27:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Mar-31 19:27:46 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Mar-31 19:27:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:27:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:27:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:27:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:27:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 19:27:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 19:27:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:27:47 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2010-Mar-31 19:27:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 19:27:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:27:47 INFO2 take_data: Starting WAPP 600-second scan: 9000062 2010-Mar-31 19:27:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:27:47 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Mar-31 19:27:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:27:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:27:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 19:27:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84468.00 2010-Mar-31 19:27:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0001.fits 2010-Mar-31 19:27:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0001.fits} 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:27:49 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 19:27:53 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 19:34:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.75)! 2010-Mar-31 19:34:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.120 0.964 0.945 2010-Mar-31 19:34:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.745 1.096 1.065 0.949 2010-Mar-31 19:34:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.840 1.106 0.958 2010-Mar-31 19:34:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.897 0.870 0.966 1.011 2010-Mar-31 19:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.121 (still bad) 2010-Mar-31 19:34:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.768 and 1.119 2010-Mar-31 19:37:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:37:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:37:48 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:37:48 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG1 fixed_driftmap: New position: year = 2010.2486459046315 RA = 08:15:05.0 RA/Dec = 08:15:42.1 +19:18:45.0 2010-Mar-31 19:37:48 NOTE fixed_driftmap: Correcting ZA to 6:40:12.4 ... 2010-Mar-31 19:37:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6701016506 -CF 2010-Mar-31 19:37:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 19:37:48 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 19:37:48 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 19:37:48 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 19:37:48 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 19:37:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 19:37:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:37:48 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 19:37:48 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6701016506 -CF 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:37:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 19:37:48 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 19:37:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:37:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 19:37:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:37:48 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Mar-31 19:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:37:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:37:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:37:49 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:37:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 19:37:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:37:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:37:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:37:49 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:37:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:37:49 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:37:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:37:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 19:37:49 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 19:37:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 19:37:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 19:37:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:37:49 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:37:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 19:37:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:37:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:37:49 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 19:37:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:37:49 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 19:37:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:37:49 INFO2 take_data: Starting WAPP 1-second scan: 9000063 2010-Mar-31 19:37:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:37:49 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Mar-31 19:37:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:37:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 19:37:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85070.00 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:37:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:37:51 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:37:51 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 19:37:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 19:37:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 19:37:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:37:51 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:37:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:37:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:37:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:37:51 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 19:37:51 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 19:37:51 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 19:37:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:37:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 19:37:51 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Mar-31 19:37:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Mar-31 19:37:51 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Mar-31 19:37:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:37:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:37:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:37:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:37:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 19:37:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 19:37:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:37:52 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2010-Mar-31 19:37:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 19:37:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:37:52 INFO2 take_data: Starting WAPP 600-second scan: 9000064 2010-Mar-31 19:37:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:37:52 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Mar-31 19:37:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:37:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:37:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 19:37:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85073.00 2010-Mar-31 19:37:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0002.fits 2010-Mar-31 19:37:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0002.fits} 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:37:54 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 19:37:58 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 19:45:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.741 < 0.75)! 2010-Mar-31 19:45:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.117 0.969 0.943 2010-Mar-31 19:45:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.741 1.096 1.072 0.948 2010-Mar-31 19:45:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.840 1.107 0.956 2010-Mar-31 19:45:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.874 0.966 1.015 2010-Mar-31 19:45:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.792 and 1.115 2010-Mar-31 19:47:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 19:47:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.117 0.967 0.943 2010-Mar-31 19:47:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.094 1.075 0.952 2010-Mar-31 19:47:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.841 1.109 0.956 2010-Mar-31 19:47:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.898 0.872 0.966 1.013 2010-Mar-31 19:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.119 (still bad) 2010-Mar-31 19:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.117 (still bad) 2010-Mar-31 19:47:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.752 and 1.118 2010-Mar-31 19:47:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.75)! 2010-Mar-31 19:47:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.123 0.975 0.951 2010-Mar-31 19:47:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.740 1.103 1.091 0.963 2010-Mar-31 19:47:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 0.843 1.118 0.963 2010-Mar-31 19:47:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.878 0.974 1.022 2010-Mar-31 19:47:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.781 and 1.117 2010-Mar-31 19:47:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:47:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:47:53 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Mar-31 19:47:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:47:53 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2010-Mar-31 19:47:53 LOG1 fixed_driftmap: New position: year = 2010.2486650759247 RA = 08:25:07.2 RA/Dec = 08:25:44.3 +19:18:37.2 2010-Mar-31 19:47:53 NOTE fixed_driftmap: Correcting ZA to 6:39:09.7 ... 2010-Mar-31 19:47:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6527014375 -CF 2010-Mar-31 19:47:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 19:47:53 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 19:47:53 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Mar-31 19:47:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 19:47:53 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 19:47:53 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-Mar-31 19:47:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 19:47:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 19:47:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:47:53 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 19:47:53 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-Mar-31 19:47:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6527014375 -CF 2010-Mar-31 19:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:47:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 19:47:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:47:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:47:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 19:47:54 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 19:47:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:47:54 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 19:47:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:47:54 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:47:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:47:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:47:54 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:47:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 19:47:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:47:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:47:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:47:54 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:47:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:47:54 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:47:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:47:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 19:47:54 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 19:47:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 19:47:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 19:47:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:47:54 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:47:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 19:47:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:47:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:47:54 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 19:47:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:47:54 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 19:47:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:47:54 INFO2 take_data: Starting WAPP 1-second scan: 9000065 2010-Mar-31 19:47:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:47:54 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Mar-31 19:47:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:47:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 19:47:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85675.00 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:47:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:47:56 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:47:56 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 19:47:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 19:47:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 19:47:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:47:56 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:47:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:47:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:47:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:47:56 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 19:47:56 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 19:47:56 LOG5 finish_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 19:47:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:47:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 19:47:56 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Mar-31 19:47:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Mar-31 19:47:56 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Mar-31 19:47:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:47:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:47:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:47:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:47:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 19:47:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 19:47:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:47:57 LOG5 begin_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2010-Mar-31 19:47:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 19:47:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:47:57 INFO2 take_data: Starting WAPP 600-second scan: 9000066 2010-Mar-31 19:47:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:47:57 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Mar-31 19:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:47:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 19:47:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85678.00 2010-Mar-31 19:47:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0003.fits 2010-Mar-31 19:47:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0003.fits} 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:47:59 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 19:48:03 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 19:50:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 19:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.116 0.972 0.945 2010-Mar-31 19:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.098 1.081 0.951 2010-Mar-31 19:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.842 1.112 0.963 2010-Mar-31 19:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.874 0.974 1.013 2010-Mar-31 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.111 (still bad) 2010-Mar-31 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.113 (still bad) 2010-Mar-31 19:50:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.778 and 1.113 2010-Mar-31 19:52:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.722 < 0.75)! 2010-Mar-31 19:52:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.113 0.967 0.941 2010-Mar-31 19:52:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.722 1.096 1.075 0.948 2010-Mar-31 19:52:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.838 1.109 0.958 2010-Mar-31 19:52:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.871 0.969 1.011 2010-Mar-31 19:52:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.765 and 1.116 2010-Mar-31 19:53:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.75)! 2010-Mar-31 19:53:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.116 0.970 0.943 2010-Mar-31 19:53:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.746 1.096 1.075 0.949 2010-Mar-31 19:53:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.840 1.108 0.956 2010-Mar-31 19:53:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.883 0.982 1.023 2010-Mar-31 19:53:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.118 2010-Mar-31 19:53:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.75)! 2010-Mar-31 19:53:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.118 0.973 0.946 2010-Mar-31 19:53:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.733 1.102 1.075 0.950 2010-Mar-31 19:53:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.842 1.108 0.956 2010-Mar-31 19:53:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.871 0.971 1.010 2010-Mar-31 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.118 (still bad) 2010-Mar-31 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.119 (still bad) 2010-Mar-31 19:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.116 (still bad) 2010-Mar-31 19:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.116 (still bad) 2010-Mar-31 19:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.117 (still bad) 2010-Mar-31 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.118 (still bad) 2010-Mar-31 19:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.119 (still bad) 2010-Mar-31 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.118 (still bad) 2010-Mar-31 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.120 (still bad) 2010-Mar-31 19:53:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.807 and 1.119 2010-Mar-31 19:54:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 19:54:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.114 0.968 0.941 2010-Mar-31 19:54:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.098 1.076 0.950 2010-Mar-31 19:54:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.839 1.110 0.958 2010-Mar-31 19:54:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.898 0.872 0.966 1.012 2010-Mar-31 19:54:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.759 and 1.118 2010-Mar-31 19:54:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.75)! 2010-Mar-31 19:54:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.116 0.971 0.943 2010-Mar-31 19:54:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.732 1.096 1.076 0.950 2010-Mar-31 19:54:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.838 1.109 0.959 2010-Mar-31 19:54:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.898 0.872 0.968 1.010 2010-Mar-31 19:54:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.122 2010-Mar-31 19:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.75)! 2010-Mar-31 19:54:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.114 0.973 0.947 2010-Mar-31 19:54:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 1.101 1.076 0.949 2010-Mar-31 19:54:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.840 1.109 0.957 2010-Mar-31 19:54:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.871 0.969 1.010 2010-Mar-31 19:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.114 (still bad) 2010-Mar-31 19:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.120 (still bad) 2010-Mar-31 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.115 (still bad) 2010-Mar-31 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.114 (still bad) 2010-Mar-31 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.124 (still bad) 2010-Mar-31 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.116 (still bad) 2010-Mar-31 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.115 (still bad) 2010-Mar-31 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.118 (still bad) 2010-Mar-31 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.116 (still bad) 2010-Mar-31 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.115 (still bad) 2010-Mar-31 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.122 (still bad) 2010-Mar-31 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.117 (still bad) 2010-Mar-31 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.114 (still bad) 2010-Mar-31 19:55:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.769 and 1.117 2010-Mar-31 19:56:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 19:56:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.117 0.970 0.943 2010-Mar-31 19:56:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.099 1.078 0.951 2010-Mar-31 19:56:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.840 1.110 0.957 2010-Mar-31 19:56:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.870 0.969 1.011 2010-Mar-31 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.117 (still bad) 2010-Mar-31 19:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.116 (still bad) 2010-Mar-31 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.119 (still bad) 2010-Mar-31 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.120 (still bad) 2010-Mar-31 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.117 (still bad) 2010-Mar-31 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.117 (still bad) 2010-Mar-31 19:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.642 and 1.116 (still bad) 2010-Mar-31 19:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.117 (still bad) 2010-Mar-31 19:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.120 (still bad) 2010-Mar-31 19:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.120 (still bad) 2010-Mar-31 19:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.118 (still bad) 2010-Mar-31 19:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.118 (still bad) 2010-Mar-31 19:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.119 (still bad) 2010-Mar-31 19:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.116 (still bad) 2010-Mar-31 19:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.118 (still bad) 2010-Mar-31 19:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.120 (still bad) 2010-Mar-31 19:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.118 (still bad) 2010-Mar-31 19:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.117 (still bad) 2010-Mar-31 19:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.117 (still bad) 2010-Mar-31 19:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.116 (still bad) 2010-Mar-31 19:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.118 (still bad) 2010-Mar-31 19:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.118 (still bad) 2010-Mar-31 19:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.118 (still bad) 2010-Mar-31 19:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.118 (still bad) 2010-Mar-31 19:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.118 (still bad) 2010-Mar-31 19:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.118 (still bad) 2010-Mar-31 19:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.119 (still bad) 2010-Mar-31 19:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.121 (still bad) 2010-Mar-31 19:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.116 (still bad) 2010-Mar-31 19:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.118 (still bad) 2010-Mar-31 19:57:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.501 < 0.75)! 2010-Mar-31 19:57:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.119 0.969 0.942 2010-Mar-31 19:57:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.501 1.100 1.075 0.950 2010-Mar-31 19:57:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.841 1.107 0.957 2010-Mar-31 19:57:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.871 0.968 1.011 2010-Mar-31 19:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.119 (still bad) 2010-Mar-31 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.126 (still bad) 2010-Mar-31 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.117 (still bad) 2010-Mar-31 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.116 (still bad) 2010-Mar-31 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.118 (still bad) 2010-Mar-31 19:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.115 (still bad) 2010-Mar-31 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.116 (still bad) 2010-Mar-31 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.126 (still bad) 2010-Mar-31 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.118 (still bad) 2010-Mar-31 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.116 (still bad) 2010-Mar-31 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2010-Mar-31 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.118 (still bad) 2010-Mar-31 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.118 (still bad) 2010-Mar-31 19:57:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:57:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:57:58 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:57:58 LOG5 end_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 LOG1 fixed_driftmap: New position: year = 2010.2486842472176 RA = 08:35:09.5 RA/Dec = 08:35:46.5 +19:18:29.7 2010-Mar-31 19:57:58 NOTE fixed_driftmap: Correcting ZA to 6:38:08.9 ... 2010-Mar-31 19:57:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6358149498 -CF 2010-Mar-31 19:57:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 19:57:58 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 19:57:58 LOG5 begin_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 19:57:58 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 19:57:58 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 19:57:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 19:57:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:57:58 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 19:57:58 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6358149498 -CF 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:57:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 19:57:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 19:57:58 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-Mar-31 19:57:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 19:57:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:57:59 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 19:57:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:57:59 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 19:57:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:57:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:57:59 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:57:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 19:57:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 19:57:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:57:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 19:57:59 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 19:57:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 19:57:59 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 19:57:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 19:57:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 19:57:59 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 19:57:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 19:57:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 19:57:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:57:59 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:57:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 19:57:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:57:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:57:59 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 19:57:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:57:59 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 19:57:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:57:59 INFO2 take_data: Starting WAPP 1-second scan: 9000067 2010-Mar-31 19:57:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:57:59 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Mar-31 19:57:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:57:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 19:57:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86280.00 2010-Mar-31 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.119 (still bad) 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 19:58:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 19:58:01 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 19:58:01 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 19:58:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 19:58:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 19:58:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 19:58:01 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 19:58:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 19:58:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 19:58:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 19:58:01 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 19:58:01 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 19:58:01 LOG5 finish_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 19:58:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 19:58:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 19:58:01 LOG5 end_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2010-Mar-31 19:58:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Mar-31 19:58:01 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Mar-31 19:58:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:58:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:58:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:58:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 19:58:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 19:58:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 19:58:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 19:58:02 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2010-Mar-31 19:58:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 19:58:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 19:58:02 INFO2 take_data: Starting WAPP 600-second scan: 9000068 2010-Mar-31 19:58:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 19:58:02 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Mar-31 19:58:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 19:58:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.532 (still bad) 2010-Mar-31 19:58:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 19:58:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86283.00 2010-Mar-31 19:58:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0004.fits 2010-Mar-31 19:58:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0004.fits} 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.532 (still bad) 2010-Mar-31 19:58:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 19:58:04 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 19:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.120 (still bad) 2010-Mar-31 19:58:08 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 19:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.119 (still bad) 2010-Mar-31 19:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.120 (still bad) 2010-Mar-31 19:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.129 (still bad) 2010-Mar-31 19:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.121 (still bad) 2010-Mar-31 19:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.120 (still bad) 2010-Mar-31 19:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.123 (still bad) 2010-Mar-31 19:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.122 (still bad) 2010-Mar-31 19:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.122 (still bad) 2010-Mar-31 19:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2010-Mar-31 19:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.118 (still bad) 2010-Mar-31 19:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.117 (still bad) 2010-Mar-31 19:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.119 (still bad) 2010-Mar-31 19:58:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 19:58:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.119 0.969 0.942 2010-Mar-31 19:58:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.099 1.077 0.951 2010-Mar-31 19:58:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.841 1.108 0.958 2010-Mar-31 19:58:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.898 0.869 0.968 1.010 2010-Mar-31 19:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.119 (still bad) 2010-Mar-31 19:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.127 (still bad) 2010-Mar-31 19:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.119 (still bad) 2010-Mar-31 19:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.120 (still bad) 2010-Mar-31 19:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.119 (still bad) 2010-Mar-31 19:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.118 (still bad) 2010-Mar-31 19:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.119 (still bad) 2010-Mar-31 19:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.126 (still bad) 2010-Mar-31 19:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.118 (still bad) 2010-Mar-31 19:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.118 (still bad) 2010-Mar-31 19:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.121 (still bad) 2010-Mar-31 19:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.120 (still bad) 2010-Mar-31 19:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.124 (still bad) 2010-Mar-31 19:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.134 (still bad) 2010-Mar-31 19:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.130 (still bad) 2010-Mar-31 19:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.129 (still bad) 2010-Mar-31 19:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.133 (still bad) 2010-Mar-31 19:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.133 (still bad) 2010-Mar-31 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.131 (still bad) 2010-Mar-31 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.130 (still bad) 2010-Mar-31 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.123 (still bad) 2010-Mar-31 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.124 (still bad) 2010-Mar-31 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.121 (still bad) 2010-Mar-31 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.121 (still bad) 2010-Mar-31 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2010-Mar-31 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2010-Mar-31 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.118 (still bad) 2010-Mar-31 19:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.120 (still bad) 2010-Mar-31 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.119 (still bad) 2010-Mar-31 19:59:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Mar-31 19:59:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.116 0.970 0.943 2010-Mar-31 19:59:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.096 1.077 0.950 2010-Mar-31 19:59:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.842 1.114 0.964 2010-Mar-31 19:59:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.870 0.968 1.009 2010-Mar-31 19:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.125 (still bad) 2010-Mar-31 19:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.118 (still bad) 2010-Mar-31 19:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.118 (still bad) 2010-Mar-31 19:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.120 (still bad) 2010-Mar-31 19:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.118 (still bad) 2010-Mar-31 19:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.117 (still bad) 2010-Mar-31 19:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.124 (still bad) 2010-Mar-31 19:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.118 (still bad) 2010-Mar-31 19:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.117 (still bad) 2010-Mar-31 19:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.120 (still bad) 2010-Mar-31 19:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.115 (still bad) 2010-Mar-31 19:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.117 (still bad) 2010-Mar-31 19:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.123 (still bad) 2010-Mar-31 20:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.118 (still bad) 2010-Mar-31 20:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.118 (still bad) 2010-Mar-31 20:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.121 (still bad) 2010-Mar-31 20:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.119 (still bad) 2010-Mar-31 20:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.118 (still bad) 2010-Mar-31 20:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.124 (still bad) 2010-Mar-31 20:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.120 (still bad) 2010-Mar-31 20:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.118 (still bad) 2010-Mar-31 20:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.120 (still bad) 2010-Mar-31 20:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.119 (still bad) 2010-Mar-31 20:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.122 (still bad) 2010-Mar-31 20:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.119 (still bad) 2010-Mar-31 20:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.118 (still bad) 2010-Mar-31 20:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.120 (still bad) 2010-Mar-31 20:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.118 (still bad) 2010-Mar-31 20:00:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.552 < 0.75)! 2010-Mar-31 20:00:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.121 0.970 0.944 2010-Mar-31 20:00:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.552 1.099 1.076 0.951 2010-Mar-31 20:00:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 0.840 1.108 0.958 2010-Mar-31 20:00:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.875 0.971 1.013 2010-Mar-31 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.122 (still bad) 2010-Mar-31 20:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.120 (still bad) 2010-Mar-31 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.119 (still bad) 2010-Mar-31 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2010-Mar-31 20:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.118 (still bad) 2010-Mar-31 20:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.120 (still bad) 2010-Mar-31 20:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.126 (still bad) 2010-Mar-31 20:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.121 (still bad) 2010-Mar-31 20:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.120 (still bad) 2010-Mar-31 20:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.120 (still bad) 2010-Mar-31 20:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.119 (still bad) 2010-Mar-31 20:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.121 (still bad) 2010-Mar-31 20:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.127 (still bad) 2010-Mar-31 20:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.118 (still bad) 2010-Mar-31 20:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.117 (still bad) 2010-Mar-31 20:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.120 (still bad) 2010-Mar-31 20:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.117 (still bad) 2010-Mar-31 20:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.118 (still bad) 2010-Mar-31 20:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.126 (still bad) 2010-Mar-31 20:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.118 (still bad) 2010-Mar-31 20:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.117 (still bad) 2010-Mar-31 20:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.120 (still bad) 2010-Mar-31 20:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.118 (still bad) 2010-Mar-31 20:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.118 (still bad) 2010-Mar-31 20:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.129 (still bad) 2010-Mar-31 20:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.117 (still bad) 2010-Mar-31 20:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.580 and 1.121 (still bad) 2010-Mar-31 20:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.124 (still bad) 2010-Mar-31 20:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.121 (still bad) 2010-Mar-31 20:01:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.601 < 0.75)! 2010-Mar-31 20:01:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.130 0.976 0.950 2010-Mar-31 20:01:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.601 1.125 1.106 0.972 2010-Mar-31 20:01:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.845 1.111 0.963 2010-Mar-31 20:01:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.878 0.976 1.018 2010-Mar-31 20:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.584 and 1.118 (still bad) 2010-Mar-31 20:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.582 and 1.116 (still bad) 2010-Mar-31 20:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.121 (still bad) 2010-Mar-31 20:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.122 (still bad) 2010-Mar-31 20:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.133 (still bad) 2010-Mar-31 20:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.161 (still bad) 2010-Mar-31 20:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.175 (still bad) 2010-Mar-31 20:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.200 (still bad) 2010-Mar-31 20:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.223 (still bad) 2010-Mar-31 20:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.236 (still bad) 2010-Mar-31 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.243 (still bad) 2010-Mar-31 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.250 (still bad) 2010-Mar-31 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.224 (still bad) 2010-Mar-31 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.202 (still bad) 2010-Mar-31 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.181 (still bad) 2010-Mar-31 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.155 (still bad) 2010-Mar-31 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.137 (still bad) 2010-Mar-31 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.148 (still bad) 2010-Mar-31 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.171 (still bad) 2010-Mar-31 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.200 (still bad) 2010-Mar-31 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.224 (still bad) 2010-Mar-31 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.244 (still bad) 2010-Mar-31 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.253 (still bad) 2010-Mar-31 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.252 (still bad) 2010-Mar-31 20:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.237 (still bad) 2010-Mar-31 20:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.217 (still bad) 2010-Mar-31 20:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.189 (still bad) 2010-Mar-31 20:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.162 (still bad) 2010-Mar-31 20:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.140 (still bad) 2010-Mar-31 20:02:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 20:02:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.121 0.970 0.945 2010-Mar-31 20:02:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.098 1.079 0.951 2010-Mar-31 20:02:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 0.840 1.128 0.977 2010-Mar-31 20:02:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.875 0.973 1.015 2010-Mar-31 20:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.118 (still bad) 2010-Mar-31 20:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.119 (still bad) 2010-Mar-31 20:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.119 (still bad) 2010-Mar-31 20:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2010-Mar-31 20:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.122 (still bad) 2010-Mar-31 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.123 (still bad) 2010-Mar-31 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.117 (still bad) 2010-Mar-31 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.116 (still bad) 2010-Mar-31 20:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.117 (still bad) 2010-Mar-31 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.118 (still bad) 2010-Mar-31 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.117 (still bad) 2010-Mar-31 20:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.120 (still bad) 2010-Mar-31 20:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.116 (still bad) 2010-Mar-31 20:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.117 (still bad) 2010-Mar-31 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.118 (still bad) 2010-Mar-31 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.118 (still bad) 2010-Mar-31 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.121 (still bad) 2010-Mar-31 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.117 (still bad) 2010-Mar-31 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.117 (still bad) 2010-Mar-31 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.117 (still bad) 2010-Mar-31 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.118 (still bad) 2010-Mar-31 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.121 (still bad) 2010-Mar-31 20:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.123 (still bad) 2010-Mar-31 20:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.122 (still bad) 2010-Mar-31 20:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.125 (still bad) 2010-Mar-31 20:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.129 (still bad) 2010-Mar-31 20:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.130 (still bad) 2010-Mar-31 20:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.134 (still bad) 2010-Mar-31 20:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.545 < 0.75)! 2010-Mar-31 20:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.132 0.969 0.946 2010-Mar-31 20:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.545 1.098 1.079 0.951 2010-Mar-31 20:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.839 1.109 0.959 2010-Mar-31 20:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.872 0.971 1.010 2010-Mar-31 20:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.129 (still bad) 2010-Mar-31 20:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.127 (still bad) 2010-Mar-31 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.127 (still bad) 2010-Mar-31 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.123 (still bad) 2010-Mar-31 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.122 (still bad) 2010-Mar-31 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.120 (still bad) 2010-Mar-31 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.118 (still bad) 2010-Mar-31 20:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.118 (still bad) 2010-Mar-31 20:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.118 (still bad) 2010-Mar-31 20:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.118 (still bad) 2010-Mar-31 20:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.120 (still bad) 2010-Mar-31 20:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.121 (still bad) 2010-Mar-31 20:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.116 (still bad) 2010-Mar-31 20:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.118 (still bad) 2010-Mar-31 20:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.116 (still bad) 2010-Mar-31 20:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.118 (still bad) 2010-Mar-31 20:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.126 (still bad) 2010-Mar-31 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.118 (still bad) 2010-Mar-31 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.122 (still bad) 2010-Mar-31 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.116 (still bad) 2010-Mar-31 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.117 (still bad) 2010-Mar-31 20:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.125 (still bad) 2010-Mar-31 20:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.118 (still bad) 2010-Mar-31 20:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.116 (still bad) 2010-Mar-31 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.119 (still bad) 2010-Mar-31 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.117 (still bad) 2010-Mar-31 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.119 (still bad) 2010-Mar-31 20:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.128 (still bad) 2010-Mar-31 20:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.121 (still bad) 2010-Mar-31 20:04:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.566 < 0.75)! 2010-Mar-31 20:04:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.121 0.971 0.943 2010-Mar-31 20:04:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.566 1.094 1.077 0.950 2010-Mar-31 20:04:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 0.839 1.108 0.957 2010-Mar-31 20:04:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.870 0.969 1.008 2010-Mar-31 20:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.123 (still bad) 2010-Mar-31 20:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.119 (still bad) 2010-Mar-31 20:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.121 (still bad) 2010-Mar-31 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.130 (still bad) 2010-Mar-31 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.126 (still bad) 2010-Mar-31 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.125 (still bad) 2010-Mar-31 20:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.130 (still bad) 2010-Mar-31 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.128 (still bad) 2010-Mar-31 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.126 (still bad) 2010-Mar-31 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.133 (still bad) 2010-Mar-31 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.124 (still bad) 2010-Mar-31 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.122 (still bad) 2010-Mar-31 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.121 (still bad) 2010-Mar-31 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.115 (still bad) 2010-Mar-31 20:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.119 (still bad) 2010-Mar-31 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.123 (still bad) 2010-Mar-31 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.117 (still bad) 2010-Mar-31 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.118 (still bad) 2010-Mar-31 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.117 (still bad) 2010-Mar-31 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.118 (still bad) 2010-Mar-31 20:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.124 (still bad) 2010-Mar-31 20:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.116 (still bad) 2010-Mar-31 20:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.118 (still bad) 2010-Mar-31 20:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.115 (still bad) 2010-Mar-31 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.118 (still bad) 2010-Mar-31 20:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.127 (still bad) 2010-Mar-31 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:05:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.559 < 0.75)! 2010-Mar-31 20:05:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.119 0.969 0.943 2010-Mar-31 20:05:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.559 1.094 1.075 0.949 2010-Mar-31 20:05:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.845 1.110 0.958 2010-Mar-31 20:05:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.872 0.969 1.009 2010-Mar-31 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.119 (still bad) 2010-Mar-31 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.117 (still bad) 2010-Mar-31 20:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.119 (still bad) 2010-Mar-31 20:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.118 (still bad) 2010-Mar-31 20:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.119 (still bad) 2010-Mar-31 20:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.119 (still bad) 2010-Mar-31 20:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.118 (still bad) 2010-Mar-31 20:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2010-Mar-31 20:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.121 (still bad) 2010-Mar-31 20:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.116 (still bad) 2010-Mar-31 20:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.117 (still bad) 2010-Mar-31 20:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.119 (still bad) 2010-Mar-31 20:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.119 (still bad) 2010-Mar-31 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.120 (still bad) 2010-Mar-31 20:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.117 (still bad) 2010-Mar-31 20:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.117 (still bad) 2010-Mar-31 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.118 (still bad) 2010-Mar-31 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.121 (still bad) 2010-Mar-31 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.123 (still bad) 2010-Mar-31 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.117 (still bad) 2010-Mar-31 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.118 (still bad) 2010-Mar-31 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.118 (still bad) 2010-Mar-31 20:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.116 (still bad) 2010-Mar-31 20:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.120 (still bad) 2010-Mar-31 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.118 (still bad) 2010-Mar-31 20:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.560 < 0.75)! 2010-Mar-31 20:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.119 0.969 0.944 2010-Mar-31 20:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.560 1.099 1.078 0.951 2010-Mar-31 20:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.841 1.107 0.958 2010-Mar-31 20:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.872 0.969 1.012 2010-Mar-31 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.121 (still bad) 2010-Mar-31 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.121 (still bad) 2010-Mar-31 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.120 (still bad) 2010-Mar-31 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.124 (still bad) 2010-Mar-31 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.119 (still bad) 2010-Mar-31 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.119 (still bad) 2010-Mar-31 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.120 (still bad) 2010-Mar-31 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.119 (still bad) 2010-Mar-31 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.120 (still bad) 2010-Mar-31 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.127 (still bad) 2010-Mar-31 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.119 (still bad) 2010-Mar-31 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.118 (still bad) 2010-Mar-31 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.121 (still bad) 2010-Mar-31 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.119 (still bad) 2010-Mar-31 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.121 (still bad) 2010-Mar-31 20:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.128 (still bad) 2010-Mar-31 20:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.120 (still bad) 2010-Mar-31 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.120 (still bad) 2010-Mar-31 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.120 (still bad) 2010-Mar-31 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.118 (still bad) 2010-Mar-31 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2010-Mar-31 20:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.125 (still bad) 2010-Mar-31 20:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.121 (still bad) 2010-Mar-31 20:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.129 (still bad) 2010-Mar-31 20:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.136 (still bad) 2010-Mar-31 20:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.147 (still bad) 2010-Mar-31 20:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.159 (still bad) 2010-Mar-31 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.167 (still bad) 2010-Mar-31 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.170 (still bad) 2010-Mar-31 20:07:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.558 < 0.75)! 2010-Mar-31 20:07:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.170 0.970 0.945 2010-Mar-31 20:07:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.558 1.102 1.079 0.951 2010-Mar-31 20:07:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.843 1.111 0.960 2010-Mar-31 20:07:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.874 0.976 1.015 2010-Mar-31 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.162 (still bad) 2010-Mar-31 20:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.152 (still bad) 2010-Mar-31 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.146 (still bad) 2010-Mar-31 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.135 (still bad) 2010-Mar-31 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.124 (still bad) 2010-Mar-31 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.123 (still bad) 2010-Mar-31 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.133 (still bad) 2010-Mar-31 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.146 (still bad) 2010-Mar-31 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.167 (still bad) 2010-Mar-31 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.177 (still bad) 2010-Mar-31 20:08:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:08:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:08:03 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:08:03 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 LOG1 fixed_driftmap: New position: year = 2010.2487034185108 RA = 08:45:12.0 RA/Dec = 08:45:48.9 +19:18:22.4 2010-Mar-31 20:08:03 NOTE fixed_driftmap: Correcting ZA to 6:37:10.1 ... 2010-Mar-31 20:08:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6194736150 -CF 2010-Mar-31 20:08:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:08:03 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:08:03 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:08:03 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:08:03 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:08:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:08:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:08:03 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:08:03 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6194736150 -CF 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:08:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:08:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:08:03 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Mar-31 20:08:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:08:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:08:04 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:08:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:08:04 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:08:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:08:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:08:04 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:08:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:08:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:08:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:08:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:08:04 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:08:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:08:04 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:08:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:08:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:08:04 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:08:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:08:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:08:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:08:04 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:08:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:08:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:08:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:08:04 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:08:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:08:04 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:08:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:08:04 INFO2 take_data: Starting WAPP 1-second scan: 9000069 2010-Mar-31 20:08:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:08:04 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Mar-31 20:08:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:08:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:08:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 485.00 2010-Mar-31 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.184 (still bad) 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:08:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:08:06 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:08:06 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:08:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:08:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:08:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:08:06 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:08:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:08:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:08:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:08:06 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:08:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:08:06 LOG5 finish_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:08:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:08:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:08:06 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Mar-31 20:08:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Mar-31 20:08:06 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Mar-31 20:08:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:08:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:08:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:08:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:08:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:08:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:08:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:08:07 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Mar-31 20:08:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:08:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:08:07 INFO2 take_data: Starting WAPP 600-second scan: 9000070 2010-Mar-31 20:08:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:08:07 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Mar-31 20:08:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:08:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:08:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.600 (still bad) 2010-Mar-31 20:08:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 488.00 2010-Mar-31 20:08:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0005.fits 2010-Mar-31 20:08:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0005.fits} 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:08:09 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.600 (still bad) 2010-Mar-31 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.192 (still bad) 2010-Mar-31 20:08:12 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.191 (still bad) 2010-Mar-31 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.180 (still bad) 2010-Mar-31 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.165 (still bad) 2010-Mar-31 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.151 (still bad) 2010-Mar-31 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.136 (still bad) 2010-Mar-31 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.124 (still bad) 2010-Mar-31 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.130 (still bad) 2010-Mar-31 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.122 (still bad) 2010-Mar-31 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.123 (still bad) 2010-Mar-31 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.126 (still bad) 2010-Mar-31 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.128 (still bad) 2010-Mar-31 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.127 (still bad) 2010-Mar-31 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.124 (still bad) 2010-Mar-31 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.120 (still bad) 2010-Mar-31 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.120 (still bad) 2010-Mar-31 20:08:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.562 < 0.75)! 2010-Mar-31 20:08:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.118 0.979 0.953 2010-Mar-31 20:08:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.562 1.101 1.078 0.950 2010-Mar-31 20:08:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.841 1.114 0.962 2010-Mar-31 20:08:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.869 0.970 1.008 2010-Mar-31 20:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.121 (still bad) 2010-Mar-31 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.127 (still bad) 2010-Mar-31 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.119 (still bad) 2010-Mar-31 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.120 (still bad) 2010-Mar-31 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.118 (still bad) 2010-Mar-31 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.121 (still bad) 2010-Mar-31 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.126 (still bad) 2010-Mar-31 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.121 (still bad) 2010-Mar-31 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.121 (still bad) 2010-Mar-31 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.119 (still bad) 2010-Mar-31 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.123 (still bad) 2010-Mar-31 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.129 (still bad) 2010-Mar-31 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.132 (still bad) 2010-Mar-31 20:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.125 (still bad) 2010-Mar-31 20:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.123 (still bad) 2010-Mar-31 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.122 (still bad) 2010-Mar-31 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.123 (still bad) 2010-Mar-31 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.122 (still bad) 2010-Mar-31 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.122 (still bad) 2010-Mar-31 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2010-Mar-31 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.121 (still bad) 2010-Mar-31 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.124 (still bad) 2010-Mar-31 20:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.126 (still bad) 2010-Mar-31 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.129 (still bad) 2010-Mar-31 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.130 (still bad) 2010-Mar-31 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.131 (still bad) 2010-Mar-31 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.128 (still bad) 2010-Mar-31 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.126 (still bad) 2010-Mar-31 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.124 (still bad) 2010-Mar-31 20:09:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.557 < 0.75)! 2010-Mar-31 20:09:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.123 0.976 0.951 2010-Mar-31 20:09:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.557 1.097 1.079 0.952 2010-Mar-31 20:09:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.842 1.111 0.960 2010-Mar-31 20:09:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.879 0.976 1.019 2010-Mar-31 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.123 (still bad) 2010-Mar-31 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.118 (still bad) 2010-Mar-31 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.119 (still bad) 2010-Mar-31 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.121 (still bad) 2010-Mar-31 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.124 (still bad) 2010-Mar-31 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.120 (still bad) 2010-Mar-31 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.121 (still bad) 2010-Mar-31 20:10:08 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55287.007014 to 55287.007025! 2010-Mar-31 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.118 (still bad) 2010-Mar-31 20:10:09 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55287.007014 - 55287.007037)! 2010-Mar-31 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.122 (still bad) 2010-Mar-31 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.584 and 1.118 (still bad) 2010-Mar-31 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.120 (still bad) 2010-Mar-31 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.117 (still bad) 2010-Mar-31 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.119 (still bad) 2010-Mar-31 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.118 (still bad) 2010-Mar-31 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.118 (still bad) 2010-Mar-31 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.121 (still bad) 2010-Mar-31 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.123 (still bad) 2010-Mar-31 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.120 (still bad) 2010-Mar-31 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.121 (still bad) 2010-Mar-31 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.120 (still bad) 2010-Mar-31 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.119 (still bad) 2010-Mar-31 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.120 (still bad) 2010-Mar-31 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.123 (still bad) 2010-Mar-31 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.119 (still bad) 2010-Mar-31 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:10:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.564 < 0.75)! 2010-Mar-31 20:10:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.126 0.977 0.951 2010-Mar-31 20:10:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.564 1.101 1.078 0.951 2010-Mar-31 20:10:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.847 1.118 0.967 2010-Mar-31 20:10:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.877 0.977 1.019 2010-Mar-31 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.119 (still bad) 2010-Mar-31 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.119 (still bad) 2010-Mar-31 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.117 (still bad) 2010-Mar-31 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.117 (still bad) 2010-Mar-31 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.126 (still bad) 2010-Mar-31 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.120 (still bad) 2010-Mar-31 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.120 (still bad) 2010-Mar-31 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.118 (still bad) 2010-Mar-31 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.120 (still bad) 2010-Mar-31 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.130 (still bad) 2010-Mar-31 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.119 (still bad) 2010-Mar-31 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.119 (still bad) 2010-Mar-31 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.123 (still bad) 2010-Mar-31 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.120 (still bad) 2010-Mar-31 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.129 (still bad) 2010-Mar-31 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.120 (still bad) 2010-Mar-31 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.119 (still bad) 2010-Mar-31 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.124 (still bad) 2010-Mar-31 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.120 (still bad) 2010-Mar-31 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.120 (still bad) 2010-Mar-31 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.130 (still bad) 2010-Mar-31 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.121 (still bad) 2010-Mar-31 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.123 (still bad) 2010-Mar-31 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.120 (still bad) 2010-Mar-31 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.122 (still bad) 2010-Mar-31 20:11:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.563 < 0.75)! 2010-Mar-31 20:11:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.131 0.978 0.952 2010-Mar-31 20:11:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.563 1.108 1.085 0.958 2010-Mar-31 20:11:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.848 1.118 0.967 2010-Mar-31 20:11:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.877 0.979 1.018 2010-Mar-31 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.123 (still bad) 2010-Mar-31 20:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.122 (still bad) 2010-Mar-31 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.123 (still bad) 2010-Mar-31 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.121 (still bad) 2010-Mar-31 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.121 (still bad) 2010-Mar-31 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.130 (still bad) 2010-Mar-31 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.121 (still bad) 2010-Mar-31 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.120 (still bad) 2010-Mar-31 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.121 (still bad) 2010-Mar-31 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.121 (still bad) 2010-Mar-31 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.120 (still bad) 2010-Mar-31 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.132 (still bad) 2010-Mar-31 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.120 (still bad) 2010-Mar-31 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.121 (still bad) 2010-Mar-31 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.122 (still bad) 2010-Mar-31 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.128 (still bad) 2010-Mar-31 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.122 (still bad) 2010-Mar-31 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.121 (still bad) 2010-Mar-31 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.121 (still bad) 2010-Mar-31 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.120 (still bad) 2010-Mar-31 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.123 (still bad) 2010-Mar-31 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.121 (still bad) 2010-Mar-31 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.121 (still bad) 2010-Mar-31 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.122 (still bad) 2010-Mar-31 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.121 (still bad) 2010-Mar-31 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.121 (still bad) 2010-Mar-31 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.122 (still bad) 2010-Mar-31 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.123 (still bad) 2010-Mar-31 20:12:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.558 < 0.75)! 2010-Mar-31 20:12:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.121 0.971 0.946 2010-Mar-31 20:12:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.558 1.101 1.079 0.953 2010-Mar-31 20:12:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.841 1.111 0.962 2010-Mar-31 20:12:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.872 0.972 1.013 2010-Mar-31 20:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.122 (still bad) 2010-Mar-31 20:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.120 (still bad) 2010-Mar-31 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.121 (still bad) 2010-Mar-31 20:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.123 (still bad) 2010-Mar-31 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.124 (still bad) 2010-Mar-31 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.121 (still bad) 2010-Mar-31 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.122 (still bad) 2010-Mar-31 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.123 (still bad) 2010-Mar-31 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.124 (still bad) 2010-Mar-31 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.125 (still bad) 2010-Mar-31 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.124 (still bad) 2010-Mar-31 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.123 (still bad) 2010-Mar-31 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.124 (still bad) 2010-Mar-31 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.124 (still bad) 2010-Mar-31 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.124 (still bad) 2010-Mar-31 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.125 (still bad) 2010-Mar-31 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.125 (still bad) 2010-Mar-31 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.125 (still bad) 2010-Mar-31 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.122 (still bad) 2010-Mar-31 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.122 (still bad) 2010-Mar-31 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.121 (still bad) 2010-Mar-31 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.123 (still bad) 2010-Mar-31 20:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.119 (still bad) 2010-Mar-31 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.122 (still bad) 2010-Mar-31 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.119 (still bad) 2010-Mar-31 20:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.122 (still bad) 2010-Mar-31 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.120 (still bad) 2010-Mar-31 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.120 (still bad) 2010-Mar-31 20:13:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.556 < 0.75)! 2010-Mar-31 20:13:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.118 0.970 0.946 2010-Mar-31 20:13:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.556 1.097 1.080 0.951 2010-Mar-31 20:13:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.840 1.111 0.960 2010-Mar-31 20:13:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.870 0.969 1.010 2010-Mar-31 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.118 (still bad) 2010-Mar-31 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.119 (still bad) 2010-Mar-31 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.120 (still bad) 2010-Mar-31 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.122 (still bad) 2010-Mar-31 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.120 (still bad) 2010-Mar-31 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.118 (still bad) 2010-Mar-31 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.118 (still bad) 2010-Mar-31 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.127 (still bad) 2010-Mar-31 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.121 (still bad) 2010-Mar-31 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.121 (still bad) 2010-Mar-31 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.122 (still bad) 2010-Mar-31 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.118 (still bad) 2010-Mar-31 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.130 (still bad) 2010-Mar-31 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.120 (still bad) 2010-Mar-31 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.120 (still bad) 2010-Mar-31 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.119 (still bad) 2010-Mar-31 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.120 (still bad) 2010-Mar-31 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.121 (still bad) 2010-Mar-31 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.127 (still bad) 2010-Mar-31 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.121 (still bad) 2010-Mar-31 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.119 (still bad) 2010-Mar-31 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.122 (still bad) 2010-Mar-31 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.116 (still bad) 2010-Mar-31 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.117 (still bad) 2010-Mar-31 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.127 (still bad) 2010-Mar-31 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.118 (still bad) 2010-Mar-31 20:14:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.564 < 0.75)! 2010-Mar-31 20:14:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.116 0.970 0.944 2010-Mar-31 20:14:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.564 1.095 1.079 0.949 2010-Mar-31 20:14:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.838 1.111 0.959 2010-Mar-31 20:14:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.871 0.970 1.011 2010-Mar-31 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.120 (still bad) 2010-Mar-31 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.117 (still bad) 2010-Mar-31 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.118 (still bad) 2010-Mar-31 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.123 (still bad) 2010-Mar-31 20:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.119 (still bad) 2010-Mar-31 20:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.119 (still bad) 2010-Mar-31 20:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.119 (still bad) 2010-Mar-31 20:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.118 (still bad) 2010-Mar-31 20:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.118 (still bad) 2010-Mar-31 20:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.126 (still bad) 2010-Mar-31 20:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.119 (still bad) 2010-Mar-31 20:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.116 (still bad) 2010-Mar-31 20:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.118 (still bad) 2010-Mar-31 20:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.115 (still bad) 2010-Mar-31 20:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.118 (still bad) 2010-Mar-31 20:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.124 (still bad) 2010-Mar-31 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.118 (still bad) 2010-Mar-31 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.116 (still bad) 2010-Mar-31 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.120 (still bad) 2010-Mar-31 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.118 (still bad) 2010-Mar-31 20:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.118 (still bad) 2010-Mar-31 20:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.126 (still bad) 2010-Mar-31 20:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.118 (still bad) 2010-Mar-31 20:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.121 (still bad) 2010-Mar-31 20:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.118 (still bad) 2010-Mar-31 20:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.120 (still bad) 2010-Mar-31 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.118 (still bad) 2010-Mar-31 20:15:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.550 < 0.75)! 2010-Mar-31 20:15:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.117 0.970 0.945 2010-Mar-31 20:15:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.550 1.097 1.082 0.951 2010-Mar-31 20:15:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.840 1.110 0.958 2010-Mar-31 20:15:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.867 0.969 1.006 2010-Mar-31 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.118 (still bad) 2010-Mar-31 20:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.119 (still bad) 2010-Mar-31 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.126 (still bad) 2010-Mar-31 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.118 (still bad) 2010-Mar-31 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.119 (still bad) 2010-Mar-31 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.116 (still bad) 2010-Mar-31 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.118 (still bad) 2010-Mar-31 20:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.126 (still bad) 2010-Mar-31 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.116 (still bad) 2010-Mar-31 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.116 (still bad) 2010-Mar-31 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.120 (still bad) 2010-Mar-31 20:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.118 (still bad) 2010-Mar-31 20:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.117 (still bad) 2010-Mar-31 20:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.125 (still bad) 2010-Mar-31 20:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.117 (still bad) 2010-Mar-31 20:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.115 (still bad) 2010-Mar-31 20:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.119 (still bad) 2010-Mar-31 20:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.117 (still bad) 2010-Mar-31 20:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.119 (still bad) 2010-Mar-31 20:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.127 (still bad) 2010-Mar-31 20:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2010-Mar-31 20:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.119 (still bad) 2010-Mar-31 20:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2010-Mar-31 20:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.119 (still bad) 2010-Mar-31 20:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2010-Mar-31 20:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.125 (still bad) 2010-Mar-31 20:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.120 (still bad) 2010-Mar-31 20:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.118 (still bad) 2010-Mar-31 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.121 (still bad) 2010-Mar-31 20:16:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 20:16:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.118 0.969 0.943 2010-Mar-31 20:16:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.098 1.075 0.948 2010-Mar-31 20:16:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.839 1.110 0.960 2010-Mar-31 20:16:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.872 0.971 1.009 2010-Mar-31 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.120 (still bad) 2010-Mar-31 20:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.125 (still bad) 2010-Mar-31 20:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.119 (still bad) 2010-Mar-31 20:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.117 (still bad) 2010-Mar-31 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.119 (still bad) 2010-Mar-31 20:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.116 (still bad) 2010-Mar-31 20:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.117 (still bad) 2010-Mar-31 20:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.120 (still bad) 2010-Mar-31 20:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.117 (still bad) 2010-Mar-31 20:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.115 (still bad) 2010-Mar-31 20:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.117 (still bad) 2010-Mar-31 20:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.117 (still bad) 2010-Mar-31 20:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2010-Mar-31 20:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.121 (still bad) 2010-Mar-31 20:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.122 (still bad) 2010-Mar-31 20:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.121 (still bad) 2010-Mar-31 20:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.123 (still bad) 2010-Mar-31 20:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.120 (still bad) 2010-Mar-31 20:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.121 (still bad) 2010-Mar-31 20:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.125 (still bad) 2010-Mar-31 20:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.116 (still bad) 2010-Mar-31 20:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.116 (still bad) 2010-Mar-31 20:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.110 (still bad) 2010-Mar-31 20:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.117 (still bad) 2010-Mar-31 20:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.117 (still bad) 2010-Mar-31 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.124 (still bad) 2010-Mar-31 20:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.115 (still bad) 2010-Mar-31 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.119 (still bad) 2010-Mar-31 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.120 (still bad) 2010-Mar-31 20:17:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.536 < 0.75)! 2010-Mar-31 20:17:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.119 0.970 0.943 2010-Mar-31 20:17:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.536 1.096 1.078 0.949 2010-Mar-31 20:17:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.840 1.108 0.958 2010-Mar-31 20:17:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.869 0.969 1.007 2010-Mar-31 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.118 (still bad) 2010-Mar-31 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.122 (still bad) 2010-Mar-31 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.115 (still bad) 2010-Mar-31 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.116 (still bad) 2010-Mar-31 20:18:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:18:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:18:08 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:18:08 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 LOG1 fixed_driftmap: New position: year = 2010.2487225898039 RA = 08:55:14.6 RA/Dec = 08:55:51.4 +19:18:15.3 2010-Mar-31 20:18:08 NOTE fixed_driftmap: Correcting ZA to 6:36:13.3 ... 2010-Mar-31 20:18:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6037073537 -CF 2010-Mar-31 20:18:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:18:08 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:18:08 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:18:08 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:18:08 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:18:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:18:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:18:08 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:18:08 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6037073537 -CF 2010-Mar-31 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.120 (still bad) 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:18:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:18:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:18:08 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-Mar-31 20:18:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:18:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:18:09 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:18:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:18:09 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:18:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:18:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:18:09 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:18:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:18:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:18:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:18:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:18:09 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:18:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:18:09 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:18:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:18:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:18:09 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:18:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:18:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:18:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:18:09 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:18:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:18:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:18:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:18:09 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:18:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:18:09 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:18:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:18:09 INFO2 take_data: Starting WAPP 1-second scan: 9000071 2010-Mar-31 20:18:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:18:09 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Mar-31 20:18:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:18:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:18:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1090.00 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:18:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:18:11 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:18:11 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:18:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:18:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:18:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:18:11 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:18:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.533 (still bad) 2010-Mar-31 20:18:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:18:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:18:11 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:18:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:18:11 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:18:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:18:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:18:11 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Mar-31 20:18:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Mar-31 20:18:11 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Mar-31 20:18:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:18:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:18:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:18:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:18:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:18:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:18:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:18:12 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2010-Mar-31 20:18:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:18:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:18:12 INFO2 take_data: Starting WAPP 600-second scan: 9000072 2010-Mar-31 20:18:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:18:12 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Mar-31 20:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:18:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:18:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1093.00 2010-Mar-31 20:18:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0006.fits 2010-Mar-31 20:18:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0006.fits} 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:18:14 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.125 (still bad) 2010-Mar-31 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.117 (still bad) 2010-Mar-31 20:18:17 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.119 (still bad) 2010-Mar-31 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.121 (still bad) 2010-Mar-31 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.115 (still bad) 2010-Mar-31 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.117 (still bad) 2010-Mar-31 20:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.127 (still bad) 2010-Mar-31 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.117 (still bad) 2010-Mar-31 20:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.120 (still bad) 2010-Mar-31 20:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.119 (still bad) 2010-Mar-31 20:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.117 (still bad) 2010-Mar-31 20:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.116 (still bad) 2010-Mar-31 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.127 (still bad) 2010-Mar-31 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2010-Mar-31 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.117 (still bad) 2010-Mar-31 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.117 (still bad) 2010-Mar-31 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.118 (still bad) 2010-Mar-31 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.116 (still bad) 2010-Mar-31 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.126 (still bad) 2010-Mar-31 20:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.118 (still bad) 2010-Mar-31 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.116 (still bad) 2010-Mar-31 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.119 (still bad) 2010-Mar-31 20:18:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.535 < 0.75)! 2010-Mar-31 20:18:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.118 0.973 0.948 2010-Mar-31 20:18:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.535 1.098 1.079 0.949 2010-Mar-31 20:18:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 0.842 1.107 0.959 2010-Mar-31 20:18:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.871 0.969 1.012 2010-Mar-31 20:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.118 (still bad) 2010-Mar-31 20:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.124 (still bad) 2010-Mar-31 20:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.118 (still bad) 2010-Mar-31 20:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.119 (still bad) 2010-Mar-31 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.117 (still bad) 2010-Mar-31 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.118 (still bad) 2010-Mar-31 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.119 (still bad) 2010-Mar-31 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.120 (still bad) 2010-Mar-31 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.119 (still bad) 2010-Mar-31 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.118 (still bad) 2010-Mar-31 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.118 (still bad) 2010-Mar-31 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.120 (still bad) 2010-Mar-31 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.120 (still bad) 2010-Mar-31 20:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.117 (still bad) 2010-Mar-31 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.116 (still bad) 2010-Mar-31 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.116 (still bad) 2010-Mar-31 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.117 (still bad) 2010-Mar-31 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.117 (still bad) 2010-Mar-31 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.118 (still bad) 2010-Mar-31 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.121 (still bad) 2010-Mar-31 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.118 (still bad) 2010-Mar-31 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.119 (still bad) 2010-Mar-31 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.118 (still bad) 2010-Mar-31 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.121 (still bad) 2010-Mar-31 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.121 (still bad) 2010-Mar-31 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.118 (still bad) 2010-Mar-31 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.117 (still bad) 2010-Mar-31 20:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.120 (still bad) 2010-Mar-31 20:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.117 (still bad) 2010-Mar-31 20:20:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 20:20:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.118 0.971 0.945 2010-Mar-31 20:20:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.097 1.092 0.960 2010-Mar-31 20:20:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.842 1.108 0.960 2010-Mar-31 20:20:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.870 0.969 1.010 2010-Mar-31 20:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.120 (still bad) 2010-Mar-31 20:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.119 (still bad) 2010-Mar-31 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.116 (still bad) 2010-Mar-31 20:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.120 (still bad) 2010-Mar-31 20:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.119 (still bad) 2010-Mar-31 20:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.118 (still bad) 2010-Mar-31 20:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.118 (still bad) 2010-Mar-31 20:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.118 (still bad) 2010-Mar-31 20:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.117 (still bad) 2010-Mar-31 20:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.117 (still bad) 2010-Mar-31 20:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.118 (still bad) 2010-Mar-31 20:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.118 (still bad) 2010-Mar-31 20:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.122 (still bad) 2010-Mar-31 20:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.120 (still bad) 2010-Mar-31 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.120 (still bad) 2010-Mar-31 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.122 (still bad) 2010-Mar-31 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.122 (still bad) 2010-Mar-31 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.119 (still bad) 2010-Mar-31 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2010-Mar-31 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2010-Mar-31 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2010-Mar-31 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.120 (still bad) 2010-Mar-31 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.120 (still bad) 2010-Mar-31 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.120 (still bad) 2010-Mar-31 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.129 (still bad) 2010-Mar-31 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2010-Mar-31 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.122 (still bad) 2010-Mar-31 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.123 (still bad) 2010-Mar-31 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.122 (still bad) 2010-Mar-31 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.121 (still bad) 2010-Mar-31 20:21:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.75)! 2010-Mar-31 20:21:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.129 0.979 0.953 2010-Mar-31 20:21:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.529 1.106 1.089 0.958 2010-Mar-31 20:21:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.847 1.120 0.969 2010-Mar-31 20:21:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.877 0.978 1.018 2010-Mar-31 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2010-Mar-31 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.120 (still bad) 2010-Mar-31 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.125 (still bad) 2010-Mar-31 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.124 (still bad) 2010-Mar-31 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2010-Mar-31 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.133 (still bad) 2010-Mar-31 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.124 (still bad) 2010-Mar-31 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.125 (still bad) 2010-Mar-31 20:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.126 (still bad) 2010-Mar-31 20:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.123 (still bad) 2010-Mar-31 20:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.123 (still bad) 2010-Mar-31 20:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.131 (still bad) 2010-Mar-31 20:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2010-Mar-31 20:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2010-Mar-31 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2010-Mar-31 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.131 (still bad) 2010-Mar-31 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.123 (still bad) 2010-Mar-31 20:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2010-Mar-31 20:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.124 (still bad) 2010-Mar-31 20:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.119 (still bad) 2010-Mar-31 20:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.120 (still bad) 2010-Mar-31 20:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.130 (still bad) 2010-Mar-31 20:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.120 (still bad) 2010-Mar-31 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.121 (still bad) 2010-Mar-31 20:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.122 (still bad) 2010-Mar-31 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.120 (still bad) 2010-Mar-31 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.119 (still bad) 2010-Mar-31 20:22:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.533 < 0.75)! 2010-Mar-31 20:22:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.128 0.982 0.958 2010-Mar-31 20:22:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.533 1.108 1.090 0.957 2010-Mar-31 20:22:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.844 1.114 0.963 2010-Mar-31 20:22:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.878 0.978 1.019 2010-Mar-31 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2010-Mar-31 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.121 (still bad) 2010-Mar-31 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.125 (still bad) 2010-Mar-31 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.121 (still bad) 2010-Mar-31 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.130 (still bad) 2010-Mar-31 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.122 (still bad) 2010-Mar-31 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.127 (still bad) 2010-Mar-31 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2010-Mar-31 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.121 (still bad) 2010-Mar-31 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.122 (still bad) 2010-Mar-31 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.120 (still bad) 2010-Mar-31 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.121 (still bad) 2010-Mar-31 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.122 (still bad) 2010-Mar-31 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.122 (still bad) 2010-Mar-31 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.123 (still bad) 2010-Mar-31 20:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.122 (still bad) 2010-Mar-31 20:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2010-Mar-31 20:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.123 (still bad) 2010-Mar-31 20:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.126 (still bad) 2010-Mar-31 20:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.125 (still bad) 2010-Mar-31 20:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.124 (still bad) 2010-Mar-31 20:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.123 (still bad) 2010-Mar-31 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.124 (still bad) 2010-Mar-31 20:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.124 (still bad) 2010-Mar-31 20:23:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 20:23:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.126 0.975 0.952 2010-Mar-31 20:23:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.109 1.085 0.953 2010-Mar-31 20:23:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.846 1.114 0.964 2010-Mar-31 20:23:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.873 0.978 1.015 2010-Mar-31 20:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2010-Mar-31 20:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.125 (still bad) 2010-Mar-31 20:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.124 (still bad) 2010-Mar-31 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.122 (still bad) 2010-Mar-31 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.125 (still bad) 2010-Mar-31 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.125 (still bad) 2010-Mar-31 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.125 (still bad) 2010-Mar-31 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.126 (still bad) 2010-Mar-31 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2010-Mar-31 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.127 (still bad) 2010-Mar-31 20:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.128 (still bad) 2010-Mar-31 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2010-Mar-31 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2010-Mar-31 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.127 (still bad) 2010-Mar-31 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.126 (still bad) 2010-Mar-31 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.126 (still bad) 2010-Mar-31 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.127 (still bad) 2010-Mar-31 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.122 (still bad) 2010-Mar-31 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2010-Mar-31 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.129 (still bad) 2010-Mar-31 20:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.123 (still bad) 2010-Mar-31 20:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.122 (still bad) 2010-Mar-31 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.123 (still bad) 2010-Mar-31 20:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2010-Mar-31 20:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.125 (still bad) 2010-Mar-31 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.130 (still bad) 2010-Mar-31 20:24:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 20:24:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.123 0.999 0.976 2010-Mar-31 20:24:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.102 1.084 0.954 2010-Mar-31 20:24:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.845 1.112 0.965 2010-Mar-31 20:24:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.881 0.980 1.022 2010-Mar-31 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.126 (still bad) 2010-Mar-31 20:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.124 (still bad) 2010-Mar-31 20:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.125 (still bad) 2010-Mar-31 20:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.132 (still bad) 2010-Mar-31 20:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2010-Mar-31 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.125 (still bad) 2010-Mar-31 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.126 (still bad) 2010-Mar-31 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.124 (still bad) 2010-Mar-31 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.126 (still bad) 2010-Mar-31 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.126 (still bad) 2010-Mar-31 20:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.126 (still bad) 2010-Mar-31 20:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.127 (still bad) 2010-Mar-31 20:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2010-Mar-31 20:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.127 (still bad) 2010-Mar-31 20:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 20:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.123 (still bad) 2010-Mar-31 20:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.124 (still bad) 2010-Mar-31 20:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.125 (still bad) 2010-Mar-31 20:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.123 (still bad) 2010-Mar-31 20:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.125 (still bad) 2010-Mar-31 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.131 (still bad) 2010-Mar-31 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.124 (still bad) 2010-Mar-31 20:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.123 (still bad) 2010-Mar-31 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.125 (still bad) 2010-Mar-31 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.121 (still bad) 2010-Mar-31 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2010-Mar-31 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.123 (still bad) 2010-Mar-31 20:25:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.519 < 0.75)! 2010-Mar-31 20:25:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.124 0.973 0.953 2010-Mar-31 20:25:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.519 1.104 1.083 0.953 2010-Mar-31 20:25:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.842 1.112 0.965 2010-Mar-31 20:25:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.877 0.977 1.018 2010-Mar-31 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.123 (still bad) 2010-Mar-31 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.122 (still bad) 2010-Mar-31 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.124 (still bad) 2010-Mar-31 20:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.128 (still bad) 2010-Mar-31 20:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.121 (still bad) 2010-Mar-31 20:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.120 (still bad) 2010-Mar-31 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.122 (still bad) 2010-Mar-31 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.122 (still bad) 2010-Mar-31 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.128 (still bad) 2010-Mar-31 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.131 (still bad) 2010-Mar-31 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.123 (still bad) 2010-Mar-31 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.122 (still bad) 2010-Mar-31 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.125 (still bad) 2010-Mar-31 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.124 (still bad) 2010-Mar-31 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.123 (still bad) 2010-Mar-31 20:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.129 (still bad) 2010-Mar-31 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.121 (still bad) 2010-Mar-31 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.120 (still bad) 2010-Mar-31 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.121 (still bad) 2010-Mar-31 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.126 (still bad) 2010-Mar-31 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.128 (still bad) 2010-Mar-31 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.128 (still bad) 2010-Mar-31 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.131 (still bad) 2010-Mar-31 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.132 (still bad) 2010-Mar-31 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.129 (still bad) 2010-Mar-31 20:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.135 (still bad) 2010-Mar-31 20:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.130 (still bad) 2010-Mar-31 20:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.127 (still bad) 2010-Mar-31 20:26:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.461 < 0.75)! 2010-Mar-31 20:26:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.127 1.051 1.017 2010-Mar-31 20:26:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.461 1.104 1.083 0.955 2010-Mar-31 20:26:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.849 1.113 0.961 2010-Mar-31 20:26:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.878 0.978 1.020 2010-Mar-31 20:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.127 (still bad) 2010-Mar-31 20:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.126 (still bad) 2010-Mar-31 20:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.129 (still bad) 2010-Mar-31 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.127 (still bad) 2010-Mar-31 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.124 (still bad) 2010-Mar-31 20:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.128 (still bad) 2010-Mar-31 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.124 (still bad) 2010-Mar-31 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.123 (still bad) 2010-Mar-31 20:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.125 (still bad) 2010-Mar-31 20:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.125 (still bad) 2010-Mar-31 20:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.122 (still bad) 2010-Mar-31 20:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.124 (still bad) 2010-Mar-31 20:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.125 (still bad) 2010-Mar-31 20:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.125 (still bad) 2010-Mar-31 20:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.128 (still bad) 2010-Mar-31 20:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.126 (still bad) 2010-Mar-31 20:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.123 (still bad) 2010-Mar-31 20:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.125 (still bad) 2010-Mar-31 20:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.124 (still bad) 2010-Mar-31 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.128 (still bad) 2010-Mar-31 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.129 (still bad) 2010-Mar-31 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.128 (still bad) 2010-Mar-31 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.123 (still bad) 2010-Mar-31 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.126 (still bad) 2010-Mar-31 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.444 and 1.125 (still bad) 2010-Mar-31 20:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.448 and 1.124 (still bad) 2010-Mar-31 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.126 (still bad) 2010-Mar-31 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.126 (still bad) 2010-Mar-31 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.448 and 1.123 (still bad) 2010-Mar-31 20:27:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.446 < 0.75)! 2010-Mar-31 20:27:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.125 0.976 0.952 2010-Mar-31 20:27:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.446 1.103 1.087 0.955 2010-Mar-31 20:27:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.116 0.965 2010-Mar-31 20:27:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.877 0.976 1.018 2010-Mar-31 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.121 (still bad) 2010-Mar-31 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.124 (still bad) 2010-Mar-31 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.124 (still bad) 2010-Mar-31 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.125 (still bad) 2010-Mar-31 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.122 (still bad) 2010-Mar-31 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.124 (still bad) 2010-Mar-31 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.121 (still bad) 2010-Mar-31 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.123 (still bad) 2010-Mar-31 20:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.123 (still bad) 2010-Mar-31 20:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.122 (still bad) 2010-Mar-31 20:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.122 (still bad) 2010-Mar-31 20:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.126 (still bad) 2010-Mar-31 20:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.122 (still bad) 2010-Mar-31 20:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.126 (still bad) 2010-Mar-31 20:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.132 (still bad) 2010-Mar-31 20:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.122 (still bad) 2010-Mar-31 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.123 (still bad) 2010-Mar-31 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.123 (still bad) 2010-Mar-31 20:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.122 (still bad) 2010-Mar-31 20:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.120 (still bad) 2010-Mar-31 20:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.129 (still bad) 2010-Mar-31 20:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.121 (still bad) 2010-Mar-31 20:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.119 (still bad) 2010-Mar-31 20:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.122 (still bad) 2010-Mar-31 20:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.120 (still bad) 2010-Mar-31 20:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.120 (still bad) 2010-Mar-31 20:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.128 (still bad) 2010-Mar-31 20:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.120 (still bad) 2010-Mar-31 20:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.120 (still bad) 2010-Mar-31 20:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.122 (still bad) 2010-Mar-31 20:28:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.455 < 0.75)! 2010-Mar-31 20:28:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.122 0.972 0.949 2010-Mar-31 20:28:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.455 1.099 1.091 0.958 2010-Mar-31 20:28:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.841 1.112 0.964 2010-Mar-31 20:28:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.873 0.974 1.013 2010-Mar-31 20:28:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:28:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:28:13 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Mar-31 20:28:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:28:13 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2010-Mar-31 20:28:13 LOG1 fixed_driftmap: New position: year = 2010.2487417610971 RA = 09:05:17.4 RA/Dec = 09:05:54.1 +19:18:08.5 2010-Mar-31 20:28:13 NOTE fixed_driftmap: Correcting ZA to 6:35:18.8 ... 2010-Mar-31 20:28:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5885455134 -CF 2010-Mar-31 20:28:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:28:13 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:28:13 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Mar-31 20:28:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:28:13 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:28:13 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Mar-31 20:28:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:28:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:28:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:28:13 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:28:13 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5885455134 -CF 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.450 and 1.123 (still bad) 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:28:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:28:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:28:13 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:28:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:28:14 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:28:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:28:14 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:28:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:28:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:28:14 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:28:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:28:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:28:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:28:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:28:14 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:28:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:28:14 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:28:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:28:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:28:14 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:28:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:28:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:28:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:28:14 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:28:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:28:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:28:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:28:14 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:28:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:28:14 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:28:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:28:14 INFO2 take_data: Starting WAPP 1-second scan: 9000073 2010-Mar-31 20:28:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:28:14 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Mar-31 20:28:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:28:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:28:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1695.00 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:28:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:28:16 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:28:16 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:28:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:28:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:28:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:28:16 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:28:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:28:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:28:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:28:16 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:28:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:28:16 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:28:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:28:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:28:16 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Mar-31 20:28:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Mar-31 20:28:16 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Mar-31 20:28:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:28:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:28:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:28:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:28:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:28:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:28:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:28:17 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Mar-31 20:28:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:28:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:28:17 INFO2 take_data: Starting WAPP 600-second scan: 9000074 2010-Mar-31 20:28:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:28:17 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Mar-31 20:28:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.544 (still bad) 2010-Mar-31 20:28:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:28:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:28:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1698.00 2010-Mar-31 20:28:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0007.fits 2010-Mar-31 20:28:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0007.fits} 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.544 (still bad) 2010-Mar-31 20:28:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:28:19 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.122 (still bad) 2010-Mar-31 20:28:22 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.449 and 1.122 (still bad) 2010-Mar-31 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.124 (still bad) 2010-Mar-31 20:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.125 (still bad) 2010-Mar-31 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.123 (still bad) 2010-Mar-31 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.122 (still bad) 2010-Mar-31 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.124 (still bad) 2010-Mar-31 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.123 (still bad) 2010-Mar-31 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.122 (still bad) 2010-Mar-31 20:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.124 (still bad) 2010-Mar-31 20:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.125 (still bad) 2010-Mar-31 20:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.123 (still bad) 2010-Mar-31 20:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.123 (still bad) 2010-Mar-31 20:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.122 (still bad) 2010-Mar-31 20:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.123 (still bad) 2010-Mar-31 20:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.122 (still bad) 2010-Mar-31 20:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.124 (still bad) 2010-Mar-31 20:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.123 (still bad) 2010-Mar-31 20:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.123 (still bad) 2010-Mar-31 20:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.123 (still bad) 2010-Mar-31 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.123 (still bad) 2010-Mar-31 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.122 (still bad) 2010-Mar-31 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.124 (still bad) 2010-Mar-31 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.121 (still bad) 2010-Mar-31 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.124 (still bad) 2010-Mar-31 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.120 (still bad) 2010-Mar-31 20:29:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 20:29:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.122 0.973 0.951 2010-Mar-31 20:29:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.103 1.084 0.953 2010-Mar-31 20:29:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.844 1.112 0.965 2010-Mar-31 20:29:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.872 0.973 1.013 2010-Mar-31 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.132 (still bad) 2010-Mar-31 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.122 (still bad) 2010-Mar-31 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.122 (still bad) 2010-Mar-31 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.125 (still bad) 2010-Mar-31 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.122 (still bad) 2010-Mar-31 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.124 (still bad) 2010-Mar-31 20:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.130 (still bad) 2010-Mar-31 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.123 (still bad) 2010-Mar-31 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.122 (still bad) 2010-Mar-31 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.126 (still bad) 2010-Mar-31 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.124 (still bad) 2010-Mar-31 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.123 (still bad) 2010-Mar-31 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.121 (still bad) 2010-Mar-31 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.123 (still bad) 2010-Mar-31 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2010-Mar-31 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.126 (still bad) 2010-Mar-31 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.128 (still bad) 2010-Mar-31 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.136 (still bad) 2010-Mar-31 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.131 (still bad) 2010-Mar-31 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.130 (still bad) 2010-Mar-31 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.135 (still bad) 2010-Mar-31 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.130 (still bad) 2010-Mar-31 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.129 (still bad) 2010-Mar-31 20:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.135 (still bad) 2010-Mar-31 20:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.125 (still bad) 2010-Mar-31 20:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.125 (still bad) 2010-Mar-31 20:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.127 (still bad) 2010-Mar-31 20:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2010-Mar-31 20:30:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.75)! 2010-Mar-31 20:30:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.124 0.973 0.952 2010-Mar-31 20:30:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.525 1.101 1.085 0.954 2010-Mar-31 20:30:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.843 1.112 0.965 2010-Mar-31 20:30:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.878 0.979 1.017 2010-Mar-31 20:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.131 (still bad) 2010-Mar-31 20:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.124 (still bad) 2010-Mar-31 20:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.124 (still bad) 2010-Mar-31 20:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.126 (still bad) 2010-Mar-31 20:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.125 (still bad) 2010-Mar-31 20:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.126 (still bad) 2010-Mar-31 20:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.133 (still bad) 2010-Mar-31 20:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.126 (still bad) 2010-Mar-31 20:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.127 (still bad) 2010-Mar-31 20:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.128 (still bad) 2010-Mar-31 20:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.123 (still bad) 2010-Mar-31 20:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2010-Mar-31 20:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.132 (still bad) 2010-Mar-31 20:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.122 (still bad) 2010-Mar-31 20:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.122 (still bad) 2010-Mar-31 20:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.125 (still bad) 2010-Mar-31 20:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.122 (still bad) 2010-Mar-31 20:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.122 (still bad) 2010-Mar-31 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.126 (still bad) 2010-Mar-31 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.125 (still bad) 2010-Mar-31 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.122 (still bad) 2010-Mar-31 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.123 (still bad) 2010-Mar-31 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.121 (still bad) 2010-Mar-31 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.128 (still bad) 2010-Mar-31 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.123 (still bad) 2010-Mar-31 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.121 (still bad) 2010-Mar-31 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.123 (still bad) 2010-Mar-31 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.124 (still bad) 2010-Mar-31 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.125 (still bad) 2010-Mar-31 20:31:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Mar-31 20:31:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.130 0.981 0.958 2010-Mar-31 20:31:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.111 1.091 0.958 2010-Mar-31 20:31:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.845 1.114 0.964 2010-Mar-31 20:31:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.875 0.976 1.016 2010-Mar-31 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.125 (still bad) 2010-Mar-31 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2010-Mar-31 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.128 (still bad) 2010-Mar-31 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.123 (still bad) 2010-Mar-31 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.125 (still bad) 2010-Mar-31 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.131 (still bad) 2010-Mar-31 20:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.123 (still bad) 2010-Mar-31 20:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.123 (still bad) 2010-Mar-31 20:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.126 (still bad) 2010-Mar-31 20:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.121 (still bad) 2010-Mar-31 20:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.122 (still bad) 2010-Mar-31 20:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.130 (still bad) 2010-Mar-31 20:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.124 (still bad) 2010-Mar-31 20:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.124 (still bad) 2010-Mar-31 20:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.126 (still bad) 2010-Mar-31 20:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.124 (still bad) 2010-Mar-31 20:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.124 (still bad) 2010-Mar-31 20:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.129 (still bad) 2010-Mar-31 20:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.124 (still bad) 2010-Mar-31 20:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.123 (still bad) 2010-Mar-31 20:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.124 (still bad) 2010-Mar-31 20:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.123 (still bad) 2010-Mar-31 20:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.124 (still bad) 2010-Mar-31 20:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.128 (still bad) 2010-Mar-31 20:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.125 (still bad) 2010-Mar-31 20:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.122 (still bad) 2010-Mar-31 20:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.127 (still bad) 2010-Mar-31 20:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.122 (still bad) 2010-Mar-31 20:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.123 (still bad) 2010-Mar-31 20:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.128 (still bad) 2010-Mar-31 20:32:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2010-Mar-31 20:32:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.123 0.976 0.954 2010-Mar-31 20:32:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.515 1.108 1.089 0.956 2010-Mar-31 20:32:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.847 1.112 0.963 2010-Mar-31 20:32:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.876 0.974 1.017 2010-Mar-31 20:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.123 (still bad) 2010-Mar-31 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.126 (still bad) 2010-Mar-31 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.123 (still bad) 2010-Mar-31 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.126 (still bad) 2010-Mar-31 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.130 (still bad) 2010-Mar-31 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.124 (still bad) 2010-Mar-31 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.125 (still bad) 2010-Mar-31 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.128 (still bad) 2010-Mar-31 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.125 (still bad) 2010-Mar-31 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.126 (still bad) 2010-Mar-31 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.129 (still bad) 2010-Mar-31 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.124 (still bad) 2010-Mar-31 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.126 (still bad) 2010-Mar-31 20:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.129 (still bad) 2010-Mar-31 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.127 (still bad) 2010-Mar-31 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.126 (still bad) 2010-Mar-31 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.134 (still bad) 2010-Mar-31 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.125 (still bad) 2010-Mar-31 20:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.126 (still bad) 2010-Mar-31 20:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.127 (still bad) 2010-Mar-31 20:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.126 (still bad) 2010-Mar-31 20:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.126 (still bad) 2010-Mar-31 20:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.133 (still bad) 2010-Mar-31 20:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.125 (still bad) 2010-Mar-31 20:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.126 (still bad) 2010-Mar-31 20:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.128 (still bad) 2010-Mar-31 20:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.127 (still bad) 2010-Mar-31 20:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.127 (still bad) 2010-Mar-31 20:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.133 (still bad) 2010-Mar-31 20:33:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.75)! 2010-Mar-31 20:33:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.128 0.975 0.953 2010-Mar-31 20:33:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.529 1.104 1.085 0.954 2010-Mar-31 20:33:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.849 1.115 0.968 2010-Mar-31 20:33:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.875 0.976 1.016 2010-Mar-31 20:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.129 (still bad) 2010-Mar-31 20:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.130 (still bad) 2010-Mar-31 20:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.128 (still bad) 2010-Mar-31 20:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.128 (still bad) 2010-Mar-31 20:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.132 (still bad) 2010-Mar-31 20:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.126 (still bad) 2010-Mar-31 20:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.128 (still bad) 2010-Mar-31 20:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.130 (still bad) 2010-Mar-31 20:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.128 (still bad) 2010-Mar-31 20:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.128 (still bad) 2010-Mar-31 20:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.133 (still bad) 2010-Mar-31 20:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.127 (still bad) 2010-Mar-31 20:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.127 (still bad) 2010-Mar-31 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.128 (still bad) 2010-Mar-31 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.127 (still bad) 2010-Mar-31 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.127 (still bad) 2010-Mar-31 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.134 (still bad) 2010-Mar-31 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.128 (still bad) 2010-Mar-31 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.127 (still bad) 2010-Mar-31 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.129 (still bad) 2010-Mar-31 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.127 (still bad) 2010-Mar-31 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.127 (still bad) 2010-Mar-31 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.133 (still bad) 2010-Mar-31 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.128 (still bad) 2010-Mar-31 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.129 (still bad) 2010-Mar-31 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.127 (still bad) 2010-Mar-31 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.127 (still bad) 2010-Mar-31 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.128 (still bad) 2010-Mar-31 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.127 (still bad) 2010-Mar-31 20:34:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 20:34:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.125 0.976 0.954 2010-Mar-31 20:34:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.105 1.084 0.953 2010-Mar-31 20:34:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.848 1.111 0.965 2010-Mar-31 20:34:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.873 0.975 1.014 2010-Mar-31 20:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.127 (still bad) 2010-Mar-31 20:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.127 (still bad) 2010-Mar-31 20:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.126 (still bad) 2010-Mar-31 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.128 (still bad) 2010-Mar-31 20:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.126 (still bad) 2010-Mar-31 20:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.126 (still bad) 2010-Mar-31 20:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.129 (still bad) 2010-Mar-31 20:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.128 (still bad) 2010-Mar-31 20:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.127 (still bad) 2010-Mar-31 20:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.130 (still bad) 2010-Mar-31 20:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2010-Mar-31 20:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2010-Mar-31 20:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.128 (still bad) 2010-Mar-31 20:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.126 (still bad) 2010-Mar-31 20:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2010-Mar-31 20:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.129 (still bad) 2010-Mar-31 20:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.128 (still bad) 2010-Mar-31 20:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.126 (still bad) 2010-Mar-31 20:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.130 (still bad) 2010-Mar-31 20:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.126 (still bad) 2010-Mar-31 20:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.125 (still bad) 2010-Mar-31 20:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.129 (still bad) 2010-Mar-31 20:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.129 (still bad) 2010-Mar-31 20:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.127 (still bad) 2010-Mar-31 20:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.131 (still bad) 2010-Mar-31 20:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.127 (still bad) 2010-Mar-31 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.127 (still bad) 2010-Mar-31 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.126 (still bad) 2010-Mar-31 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:35:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2010-Mar-31 20:35:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.130 0.973 0.955 2010-Mar-31 20:35:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.515 1.106 1.086 0.954 2010-Mar-31 20:35:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.848 1.112 0.966 2010-Mar-31 20:35:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.876 0.975 1.017 2010-Mar-31 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.130 (still bad) 2010-Mar-31 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2010-Mar-31 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.128 (still bad) 2010-Mar-31 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.130 (still bad) 2010-Mar-31 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.129 (still bad) 2010-Mar-31 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.127 (still bad) 2010-Mar-31 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.129 (still bad) 2010-Mar-31 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.128 (still bad) 2010-Mar-31 20:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.127 (still bad) 2010-Mar-31 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.130 (still bad) 2010-Mar-31 20:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.126 (still bad) 2010-Mar-31 20:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.131 (still bad) 2010-Mar-31 20:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.128 (still bad) 2010-Mar-31 20:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.129 (still bad) 2010-Mar-31 20:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.136 (still bad) 2010-Mar-31 20:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.127 (still bad) 2010-Mar-31 20:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.127 (still bad) 2010-Mar-31 20:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.128 (still bad) 2010-Mar-31 20:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.127 (still bad) 2010-Mar-31 20:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.131 (still bad) 2010-Mar-31 20:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.139 (still bad) 2010-Mar-31 20:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.130 (still bad) 2010-Mar-31 20:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.129 (still bad) 2010-Mar-31 20:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.131 (still bad) 2010-Mar-31 20:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.130 (still bad) 2010-Mar-31 20:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.129 (still bad) 2010-Mar-31 20:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.139 (still bad) 2010-Mar-31 20:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.128 (still bad) 2010-Mar-31 20:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.128 (still bad) 2010-Mar-31 20:36:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 20:36:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.132 0.977 0.957 2010-Mar-31 20:36:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.109 1.090 0.956 2010-Mar-31 20:36:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.849 1.114 0.968 2010-Mar-31 20:36:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.877 0.978 1.017 2010-Mar-31 20:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.128 (still bad) 2010-Mar-31 20:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.128 (still bad) 2010-Mar-31 20:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.136 (still bad) 2010-Mar-31 20:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.127 (still bad) 2010-Mar-31 20:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.129 (still bad) 2010-Mar-31 20:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.129 (still bad) 2010-Mar-31 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.132 (still bad) 2010-Mar-31 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.142 (still bad) 2010-Mar-31 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.132 (still bad) 2010-Mar-31 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.131 (still bad) 2010-Mar-31 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.133 (still bad) 2010-Mar-31 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.129 (still bad) 2010-Mar-31 20:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.131 (still bad) 2010-Mar-31 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.137 (still bad) 2010-Mar-31 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.129 (still bad) 2010-Mar-31 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.132 (still bad) 2010-Mar-31 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.129 (still bad) 2010-Mar-31 20:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.130 (still bad) 2010-Mar-31 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.139 (still bad) 2010-Mar-31 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.129 (still bad) 2010-Mar-31 20:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.131 (still bad) 2010-Mar-31 20:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.143 (still bad) 2010-Mar-31 20:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.166 (still bad) 2010-Mar-31 20:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.144 (still bad) 2010-Mar-31 20:37:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Mar-31 20:37:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.131 0.977 0.956 2010-Mar-31 20:37:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.109 1.097 0.964 2010-Mar-31 20:37:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.850 1.114 0.968 2010-Mar-31 20:37:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.875 0.978 1.015 2010-Mar-31 20:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.129 (still bad) 2010-Mar-31 20:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.131 (still bad) 2010-Mar-31 20:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.133 (still bad) 2010-Mar-31 20:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.132 (still bad) 2010-Mar-31 20:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.133 (still bad) 2010-Mar-31 20:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.133 (still bad) 2010-Mar-31 20:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.132 (still bad) 2010-Mar-31 20:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.133 (still bad) 2010-Mar-31 20:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.133 (still bad) 2010-Mar-31 20:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.132 (still bad) 2010-Mar-31 20:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.130 (still bad) 2010-Mar-31 20:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.133 (still bad) 2010-Mar-31 20:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.132 (still bad) 2010-Mar-31 20:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.132 (still bad) 2010-Mar-31 20:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.131 (still bad) 2010-Mar-31 20:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.132 (still bad) 2010-Mar-31 20:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.133 (still bad) 2010-Mar-31 20:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.128 (still bad) 2010-Mar-31 20:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.131 (still bad) 2010-Mar-31 20:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.131 (still bad) 2010-Mar-31 20:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.130 (still bad) 2010-Mar-31 20:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.127 (still bad) 2010-Mar-31 20:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.130 (still bad) 2010-Mar-31 20:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.129 (still bad) 2010-Mar-31 20:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.130 (still bad) 2010-Mar-31 20:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.134 (still bad) 2010-Mar-31 20:38:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:38:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:38:18 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Mar-31 20:38:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:38:18 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Mar-31 20:38:18 LOG1 fixed_driftmap: New position: year = 2010.2487609323903 RA = 09:15:20.4 RA/Dec = 09:15:57.0 +19:18:02.0 2010-Mar-31 20:38:18 NOTE fixed_driftmap: Correcting ZA to 6:34:26.5 ... 2010-Mar-31 20:38:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5740160515 -CF 2010-Mar-31 20:38:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:38:18 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:38:18 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Mar-31 20:38:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:38:18 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:38:18 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Mar-31 20:38:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:38:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:38:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:38:18 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:38:18 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5740160515 -CF 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:38:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:38:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:38:18 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:38:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:38:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:38:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:38:19 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:38:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:38:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:38:19 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:38:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:38:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:38:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:38:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:38:19 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:38:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:38:19 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:38:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:38:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:38:19 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:38:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:38:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:38:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:38:19 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:38:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:38:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:38:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:38:19 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:38:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:38:19 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:38:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:38:19 INFO2 take_data: Starting WAPP 1-second scan: 9000075 2010-Mar-31 20:38:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:38:19 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Mar-31 20:38:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:38:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:38:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2300.00 2010-Mar-31 20:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.130 (still bad) 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:38:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:38:21 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:38:21 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:38:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:38:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:38:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:38:21 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:38:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:38:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:38:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:38:21 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:38:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:38:21 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:38:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:38:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:38:21 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Mar-31 20:38:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Mar-31 20:38:21 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Mar-31 20:38:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:38:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:38:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:38:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:38:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:38:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:38:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:38:22 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-Mar-31 20:38:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:38:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:38:22 INFO2 take_data: Starting WAPP 600-second scan: 9000076 2010-Mar-31 20:38:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:38:22 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Mar-31 20:38:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:38:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.549 (still bad) 2010-Mar-31 20:38:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:38:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2303.00 2010-Mar-31 20:38:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0008.fits 2010-Mar-31 20:38:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0008.fits} 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:38:24 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:38:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.669 < 0.75)! 2010-Mar-31 20:38:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.301 1.549 1.339 1.307 2010-Mar-31 20:38:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.669 1.532 1.524 1.318 2010-Mar-31 20:38:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.490 1.179 1.524 1.278 2010-Mar-31 20:38:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.256 1.194 1.352 1.385 2010-Mar-31 20:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.132 (still bad) 2010-Mar-31 20:38:27 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.133 (still bad) 2010-Mar-31 20:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.130 (still bad) 2010-Mar-31 20:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.128 (still bad) 2010-Mar-31 20:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.133 (still bad) 2010-Mar-31 20:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.132 (still bad) 2010-Mar-31 20:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.130 (still bad) 2010-Mar-31 20:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.130 (still bad) 2010-Mar-31 20:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.133 (still bad) 2010-Mar-31 20:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.132 (still bad) 2010-Mar-31 20:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.132 (still bad) 2010-Mar-31 20:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.133 (still bad) 2010-Mar-31 20:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.134 (still bad) 2010-Mar-31 20:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.134 (still bad) 2010-Mar-31 20:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.130 (still bad) 2010-Mar-31 20:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.131 (still bad) 2010-Mar-31 20:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.132 (still bad) 2010-Mar-31 20:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.130 (still bad) 2010-Mar-31 20:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.137 (still bad) 2010-Mar-31 20:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.132 (still bad) 2010-Mar-31 20:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.133 (still bad) 2010-Mar-31 20:39:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.509 < 0.75)! 2010-Mar-31 20:39:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.129 0.974 0.955 2010-Mar-31 20:39:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.509 1.109 1.087 0.954 2010-Mar-31 20:39:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.855 1.115 0.968 2010-Mar-31 20:39:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.876 0.977 1.019 2010-Mar-31 20:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.131 (still bad) 2010-Mar-31 20:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.139 (still bad) 2010-Mar-31 20:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.127 (still bad) 2010-Mar-31 20:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.129 (still bad) 2010-Mar-31 20:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2010-Mar-31 20:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.139 (still bad) 2010-Mar-31 20:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.128 (still bad) 2010-Mar-31 20:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.131 (still bad) 2010-Mar-31 20:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.129 (still bad) 2010-Mar-31 20:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.137 (still bad) 2010-Mar-31 20:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.127 (still bad) 2010-Mar-31 20:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.130 (still bad) 2010-Mar-31 20:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.129 (still bad) 2010-Mar-31 20:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.137 (still bad) 2010-Mar-31 20:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.127 (still bad) 2010-Mar-31 20:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.127 (still bad) 2010-Mar-31 20:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.129 (still bad) 2010-Mar-31 20:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.125 (still bad) 2010-Mar-31 20:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.128 (still bad) 2010-Mar-31 20:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.133 (still bad) 2010-Mar-31 20:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.127 (still bad) 2010-Mar-31 20:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.127 (still bad) 2010-Mar-31 20:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.129 (still bad) 2010-Mar-31 20:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.128 (still bad) 2010-Mar-31 20:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 20:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.128 0.977 0.959 2010-Mar-31 20:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.107 1.089 0.954 2010-Mar-31 20:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.848 1.113 0.967 2010-Mar-31 20:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.878 0.977 1.016 2010-Mar-31 20:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.135 (still bad) 2010-Mar-31 20:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2010-Mar-31 20:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.128 (still bad) 2010-Mar-31 20:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.134 (still bad) 2010-Mar-31 20:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.128 (still bad) 2010-Mar-31 20:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.128 (still bad) 2010-Mar-31 20:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.130 (still bad) 2010-Mar-31 20:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.130 (still bad) 2010-Mar-31 20:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.131 (still bad) 2010-Mar-31 20:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.130 (still bad) 2010-Mar-31 20:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.128 (still bad) 2010-Mar-31 20:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.130 (still bad) 2010-Mar-31 20:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.128 (still bad) 2010-Mar-31 20:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.128 (still bad) 2010-Mar-31 20:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.127 (still bad) 2010-Mar-31 20:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.131 (still bad) 2010-Mar-31 20:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.127 (still bad) 2010-Mar-31 20:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.126 (still bad) 2010-Mar-31 20:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.133 (still bad) 2010-Mar-31 20:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.128 (still bad) 2010-Mar-31 20:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.127 (still bad) 2010-Mar-31 20:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.129 (still bad) 2010-Mar-31 20:41:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.512 < 0.75)! 2010-Mar-31 20:41:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.134 0.979 0.957 2010-Mar-31 20:41:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.512 1.110 1.092 0.960 2010-Mar-31 20:41:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.849 1.110 0.968 2010-Mar-31 20:41:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.880 0.978 1.020 2010-Mar-31 20:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.129 (still bad) 2010-Mar-31 20:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.131 (still bad) 2010-Mar-31 20:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.133 (still bad) 2010-Mar-31 20:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.131 (still bad) 2010-Mar-31 20:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.131 (still bad) 2010-Mar-31 20:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.139 (still bad) 2010-Mar-31 20:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.135 (still bad) 2010-Mar-31 20:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.133 (still bad) 2010-Mar-31 20:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.134 (still bad) 2010-Mar-31 20:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.132 (still bad) 2010-Mar-31 20:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.133 (still bad) 2010-Mar-31 20:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.131 (still bad) 2010-Mar-31 20:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.128 (still bad) 2010-Mar-31 20:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.129 (still bad) 2010-Mar-31 20:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.127 (still bad) 2010-Mar-31 20:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.128 (still bad) 2010-Mar-31 20:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.129 (still bad) 2010-Mar-31 20:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.130 (still bad) 2010-Mar-31 20:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.129 (still bad) 2010-Mar-31 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.127 (still bad) 2010-Mar-31 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.128 (still bad) 2010-Mar-31 20:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.127 (still bad) 2010-Mar-31 20:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.128 (still bad) 2010-Mar-31 20:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.126 (still bad) 2010-Mar-31 20:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.130 (still bad) 2010-Mar-31 20:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.129 (still bad) 2010-Mar-31 20:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.126 (still bad) 2010-Mar-31 20:42:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.476 < 0.75)! 2010-Mar-31 20:42:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.134 0.981 0.959 2010-Mar-31 20:42:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.476 1.109 1.095 0.960 2010-Mar-31 20:42:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.851 1.116 0.969 2010-Mar-31 20:42:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.881 0.980 1.022 2010-Mar-31 20:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.127 (still bad) 2010-Mar-31 20:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.127 (still bad) 2010-Mar-31 20:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.129 (still bad) 2010-Mar-31 20:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.128 (still bad) 2010-Mar-31 20:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.129 (still bad) 2010-Mar-31 20:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.136 (still bad) 2010-Mar-31 20:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.129 (still bad) 2010-Mar-31 20:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.129 (still bad) 2010-Mar-31 20:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.131 (still bad) 2010-Mar-31 20:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.134 (still bad) 2010-Mar-31 20:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.131 (still bad) 2010-Mar-31 20:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.130 (still bad) 2010-Mar-31 20:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.130 (still bad) 2010-Mar-31 20:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.133 (still bad) 2010-Mar-31 20:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.129 (still bad) 2010-Mar-31 20:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.129 (still bad) 2010-Mar-31 20:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.128 (still bad) 2010-Mar-31 20:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.129 (still bad) 2010-Mar-31 20:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.129 (still bad) 2010-Mar-31 20:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.135 (still bad) 2010-Mar-31 20:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.130 (still bad) 2010-Mar-31 20:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.128 (still bad) 2010-Mar-31 20:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.131 (still bad) 2010-Mar-31 20:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.130 (still bad) 2010-Mar-31 20:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.128 (still bad) 2010-Mar-31 20:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:43:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 20:43:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.127 0.976 0.953 2010-Mar-31 20:43:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.105 1.089 0.954 2010-Mar-31 20:43:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.849 1.121 0.972 2010-Mar-31 20:43:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.880 0.980 1.021 2010-Mar-31 20:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.128 (still bad) 2010-Mar-31 20:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.132 (still bad) 2010-Mar-31 20:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2010-Mar-31 20:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.130 (still bad) 2010-Mar-31 20:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.137 (still bad) 2010-Mar-31 20:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.129 (still bad) 2010-Mar-31 20:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.129 (still bad) 2010-Mar-31 20:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.132 (still bad) 2010-Mar-31 20:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.131 (still bad) 2010-Mar-31 20:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.130 (still bad) 2010-Mar-31 20:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.135 (still bad) 2010-Mar-31 20:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.130 (still bad) 2010-Mar-31 20:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.128 (still bad) 2010-Mar-31 20:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.130 (still bad) 2010-Mar-31 20:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.128 (still bad) 2010-Mar-31 20:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.127 (still bad) 2010-Mar-31 20:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.139 (still bad) 2010-Mar-31 20:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.131 (still bad) 2010-Mar-31 20:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.131 (still bad) 2010-Mar-31 20:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.130 (still bad) 2010-Mar-31 20:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.129 (still bad) 2010-Mar-31 20:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.132 (still bad) 2010-Mar-31 20:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.128 (still bad) 2010-Mar-31 20:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.130 (still bad) 2010-Mar-31 20:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.129 (still bad) 2010-Mar-31 20:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.129 (still bad) 2010-Mar-31 20:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.132 (still bad) 2010-Mar-31 20:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.129 (still bad) 2010-Mar-31 20:44:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.475 < 0.75)! 2010-Mar-31 20:44:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.130 0.975 0.954 2010-Mar-31 20:44:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.475 1.108 1.092 0.955 2010-Mar-31 20:44:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.849 1.116 0.966 2010-Mar-31 20:44:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.879 0.977 1.020 2010-Mar-31 20:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.128 (still bad) 2010-Mar-31 20:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.128 (still bad) 2010-Mar-31 20:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.129 (still bad) 2010-Mar-31 20:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.129 (still bad) 2010-Mar-31 20:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.131 (still bad) 2010-Mar-31 20:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.128 (still bad) 2010-Mar-31 20:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.129 (still bad) 2010-Mar-31 20:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.131 (still bad) 2010-Mar-31 20:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.129 (still bad) 2010-Mar-31 20:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.131 (still bad) 2010-Mar-31 20:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.131 (still bad) 2010-Mar-31 20:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.131 (still bad) 2010-Mar-31 20:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.129 (still bad) 2010-Mar-31 20:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.129 (still bad) 2010-Mar-31 20:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.130 (still bad) 2010-Mar-31 20:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 20:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.131 (still bad) 2010-Mar-31 20:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.129 (still bad) 2010-Mar-31 20:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.129 (still bad) 2010-Mar-31 20:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.129 (still bad) 2010-Mar-31 20:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 20:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.132 (still bad) 2010-Mar-31 20:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.131 (still bad) 2010-Mar-31 20:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.130 (still bad) 2010-Mar-31 20:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.131 (still bad) 2010-Mar-31 20:45:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 20:45:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.132 0.975 0.955 2010-Mar-31 20:45:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.109 1.090 0.955 2010-Mar-31 20:45:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.851 1.117 0.968 2010-Mar-31 20:45:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.879 0.977 1.020 2010-Mar-31 20:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.132 (still bad) 2010-Mar-31 20:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.131 (still bad) 2010-Mar-31 20:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.130 (still bad) 2010-Mar-31 20:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2010-Mar-31 20:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.131 (still bad) 2010-Mar-31 20:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.134 (still bad) 2010-Mar-31 20:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.130 (still bad) 2010-Mar-31 20:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.142 (still bad) 2010-Mar-31 20:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2010-Mar-31 20:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.134 (still bad) 2010-Mar-31 20:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.135 (still bad) 2010-Mar-31 20:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.142 (still bad) 2010-Mar-31 20:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.133 (still bad) 2010-Mar-31 20:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.132 (still bad) 2010-Mar-31 20:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.134 (still bad) 2010-Mar-31 20:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.135 (still bad) 2010-Mar-31 20:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 20:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.140 (still bad) 2010-Mar-31 20:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.131 (still bad) 2010-Mar-31 20:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.132 (still bad) 2010-Mar-31 20:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.133 (still bad) 2010-Mar-31 20:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.131 (still bad) 2010-Mar-31 20:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.131 (still bad) 2010-Mar-31 20:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.142 (still bad) 2010-Mar-31 20:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:46:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 20:46:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.135 0.975 0.955 2010-Mar-31 20:46:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.111 1.089 0.954 2010-Mar-31 20:46:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.851 1.121 0.972 2010-Mar-31 20:46:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.894 0.994 1.037 2010-Mar-31 20:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.136 (still bad) 2010-Mar-31 20:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.132 (still bad) 2010-Mar-31 20:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.142 (still bad) 2010-Mar-31 20:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.131 (still bad) 2010-Mar-31 20:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.134 (still bad) 2010-Mar-31 20:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.133 (still bad) 2010-Mar-31 20:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.141 (still bad) 2010-Mar-31 20:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.133 (still bad) 2010-Mar-31 20:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.129 (still bad) 2010-Mar-31 20:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.134 (still bad) 2010-Mar-31 20:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.131 (still bad) 2010-Mar-31 20:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.139 (still bad) 2010-Mar-31 20:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.130 (still bad) 2010-Mar-31 20:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.134 (still bad) 2010-Mar-31 20:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.134 (still bad) 2010-Mar-31 20:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.129 (still bad) 2010-Mar-31 20:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.130 (still bad) 2010-Mar-31 20:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.137 (still bad) 2010-Mar-31 20:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.131 (still bad) 2010-Mar-31 20:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.133 (still bad) 2010-Mar-31 20:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.130 (still bad) 2010-Mar-31 20:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.133 (still bad) 2010-Mar-31 20:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.132 (still bad) 2010-Mar-31 20:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:47:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 20:47:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.133 0.978 0.961 2010-Mar-31 20:47:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.110 1.091 0.958 2010-Mar-31 20:47:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.850 1.119 0.970 2010-Mar-31 20:47:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.881 0.978 1.022 2010-Mar-31 20:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.131 (still bad) 2010-Mar-31 20:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.131 (still bad) 2010-Mar-31 20:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 20:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.135 (still bad) 2010-Mar-31 20:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.132 (still bad) 2010-Mar-31 20:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.135 (still bad) 2010-Mar-31 20:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 20:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.130 (still bad) 2010-Mar-31 20:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 20:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.130 (still bad) 2010-Mar-31 20:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.132 (still bad) 2010-Mar-31 20:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.137 (still bad) 2010-Mar-31 20:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.130 (still bad) 2010-Mar-31 20:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.131 (still bad) 2010-Mar-31 20:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.133 (still bad) 2010-Mar-31 20:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.136 (still bad) 2010-Mar-31 20:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.130 (still bad) 2010-Mar-31 20:48:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:48:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:48:23 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Mar-31 20:48:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:48:23 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-Mar-31 20:48:23 LOG1 fixed_driftmap: New position: year = 2010.2487801036834 RA = 09:25:23.5 RA/Dec = 09:25:59.9 +19:17:55.8 2010-Mar-31 20:48:23 NOTE fixed_driftmap: Correcting ZA to 6:33:36.5 ... 2010-Mar-31 20:48:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5601459523 -CF 2010-Mar-31 20:48:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:48:23 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:48:23 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Mar-31 20:48:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:48:23 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:48:23 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Mar-31 20:48:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:48:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:48:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:48:23 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:48:23 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5601459523 -CF 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:48:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:48:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:48:23 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:48:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:48:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:48:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:48:24 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:48:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:48:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:48:24 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:48:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:48:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:48:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:48:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:48:24 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:48:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:48:24 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:48:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:48:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:48:24 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:48:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:48:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:48:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:48:24 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:48:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:48:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:48:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:48:24 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:48:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:48:24 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:48:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:48:24 INFO2 take_data: Starting WAPP 1-second scan: 9000077 2010-Mar-31 20:48:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:48:24 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Mar-31 20:48:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:48:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:48:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2905.00 2010-Mar-31 20:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:48:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:48:26 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:48:26 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:48:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:48:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:48:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:48:26 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:48:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:48:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:48:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:48:26 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:48:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:48:26 LOG5 finish_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:48:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:48:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:48:26 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Mar-31 20:48:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Mar-31 20:48:26 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Mar-31 20:48:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:48:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:48:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:48:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:48:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:48:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:48:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:48:27 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2010-Mar-31 20:48:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:48:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:48:27 INFO2 take_data: Starting WAPP 600-second scan: 9000078 2010-Mar-31 20:48:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:48:27 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Mar-31 20:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:48:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:48:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2908.00 2010-Mar-31 20:48:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0009.fits 2010-Mar-31 20:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.550 (still bad) 2010-Mar-31 20:48:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0009.fits} 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:48:29 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.529 (still bad) 2010-Mar-31 20:48:31 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 20:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.133 (still bad) 2010-Mar-31 20:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:48:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.519 < 0.75)! 2010-Mar-31 20:48:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.131 0.978 0.958 2010-Mar-31 20:48:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.519 1.113 1.091 0.957 2010-Mar-31 20:48:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.853 1.120 0.969 2010-Mar-31 20:48:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.881 0.981 1.022 2010-Mar-31 20:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.131 (still bad) 2010-Mar-31 20:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.134 (still bad) 2010-Mar-31 20:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.133 (still bad) 2010-Mar-31 20:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 20:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 20:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.132 (still bad) 2010-Mar-31 20:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.135 (still bad) 2010-Mar-31 20:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.134 (still bad) 2010-Mar-31 20:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 20:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.137 (still bad) 2010-Mar-31 20:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.135 (still bad) 2010-Mar-31 20:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.135 (still bad) 2010-Mar-31 20:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.136 (still bad) 2010-Mar-31 20:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.136 (still bad) 2010-Mar-31 20:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 20:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.135 (still bad) 2010-Mar-31 20:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.136 (still bad) 2010-Mar-31 20:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.141 (still bad) 2010-Mar-31 20:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 20:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 20:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 20:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.134 (still bad) 2010-Mar-31 20:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.135 (still bad) 2010-Mar-31 20:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.141 (still bad) 2010-Mar-31 20:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.133 (still bad) 2010-Mar-31 20:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.133 (still bad) 2010-Mar-31 20:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.135 (still bad) 2010-Mar-31 20:49:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.569 < 0.75)! 2010-Mar-31 20:49:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.135 0.978 0.958 2010-Mar-31 20:49:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.569 1.106 1.090 0.957 2010-Mar-31 20:49:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.851 1.118 0.969 2010-Mar-31 20:49:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.881 0.981 1.022 2010-Mar-31 20:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.134 (still bad) 2010-Mar-31 20:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.140 (still bad) 2010-Mar-31 20:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.133 (still bad) 2010-Mar-31 20:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.134 (still bad) 2010-Mar-31 20:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.136 (still bad) 2010-Mar-31 20:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.133 (still bad) 2010-Mar-31 20:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.135 (still bad) 2010-Mar-31 20:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.141 (still bad) 2010-Mar-31 20:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.133 (still bad) 2010-Mar-31 20:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.133 (still bad) 2010-Mar-31 20:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.135 (still bad) 2010-Mar-31 20:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.133 (still bad) 2010-Mar-31 20:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.133 (still bad) 2010-Mar-31 20:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.140 (still bad) 2010-Mar-31 20:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.135 (still bad) 2010-Mar-31 20:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.136 (still bad) 2010-Mar-31 20:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.134 (still bad) 2010-Mar-31 20:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.140 (still bad) 2010-Mar-31 20:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.132 (still bad) 2010-Mar-31 20:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.134 (still bad) 2010-Mar-31 20:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.132 (still bad) 2010-Mar-31 20:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.134 (still bad) 2010-Mar-31 20:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.141 (still bad) 2010-Mar-31 20:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.133 (still bad) 2010-Mar-31 20:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.135 (still bad) 2010-Mar-31 20:50:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Mar-31 20:50:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.134 0.978 0.958 2010-Mar-31 20:50:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.109 1.090 0.958 2010-Mar-31 20:50:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.850 1.117 0.971 2010-Mar-31 20:50:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.881 0.977 1.021 2010-Mar-31 20:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.140 (still bad) 2010-Mar-31 20:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.134 (still bad) 2010-Mar-31 20:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.133 (still bad) 2010-Mar-31 20:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.135 (still bad) 2010-Mar-31 20:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.134 (still bad) 2010-Mar-31 20:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.137 (still bad) 2010-Mar-31 20:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.139 (still bad) 2010-Mar-31 20:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.136 (still bad) 2010-Mar-31 20:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.137 (still bad) 2010-Mar-31 20:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.134 (still bad) 2010-Mar-31 20:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.136 (still bad) 2010-Mar-31 20:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.135 (still bad) 2010-Mar-31 20:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.135 (still bad) 2010-Mar-31 20:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.133 (still bad) 2010-Mar-31 20:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.133 (still bad) 2010-Mar-31 20:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.133 (still bad) 2010-Mar-31 20:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 20:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.132 (still bad) 2010-Mar-31 20:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 20:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.133 (still bad) 2010-Mar-31 20:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.134 (still bad) 2010-Mar-31 20:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.136 (still bad) 2010-Mar-31 20:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.134 (still bad) 2010-Mar-31 20:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:51:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.512 < 0.75)! 2010-Mar-31 20:51:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.135 0.988 0.971 2010-Mar-31 20:51:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.512 1.106 1.092 0.956 2010-Mar-31 20:51:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.851 1.118 0.971 2010-Mar-31 20:51:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.881 0.980 1.020 2010-Mar-31 20:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.133 (still bad) 2010-Mar-31 20:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.132 (still bad) 2010-Mar-31 20:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.131 (still bad) 2010-Mar-31 20:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.134 (still bad) 2010-Mar-31 20:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.134 (still bad) 2010-Mar-31 20:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.132 (still bad) 2010-Mar-31 20:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.134 (still bad) 2010-Mar-31 20:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.130 (still bad) 2010-Mar-31 20:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.133 (still bad) 2010-Mar-31 20:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.131 (still bad) 2010-Mar-31 20:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.129 (still bad) 2010-Mar-31 20:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.132 (still bad) 2010-Mar-31 20:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.128 (still bad) 2010-Mar-31 20:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.131 (still bad) 2010-Mar-31 20:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.131 (still bad) 2010-Mar-31 20:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.131 (still bad) 2010-Mar-31 20:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.134 (still bad) 2010-Mar-31 20:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.132 (still bad) 2010-Mar-31 20:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.139 (still bad) 2010-Mar-31 20:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.130 (still bad) 2010-Mar-31 20:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.128 (still bad) 2010-Mar-31 20:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.132 (still bad) 2010-Mar-31 20:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.129 (still bad) 2010-Mar-31 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.131 (still bad) 2010-Mar-31 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.139 (still bad) 2010-Mar-31 20:52:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.520 < 0.75)! 2010-Mar-31 20:52:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.131 0.977 0.960 2010-Mar-31 20:52:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.520 1.105 1.090 0.956 2010-Mar-31 20:52:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.849 1.115 0.970 2010-Mar-31 20:52:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.879 0.980 1.019 2010-Mar-31 20:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.132 (still bad) 2010-Mar-31 20:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.129 (still bad) 2010-Mar-31 20:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.129 (still bad) 2010-Mar-31 20:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.138 (still bad) 2010-Mar-31 20:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.131 (still bad) 2010-Mar-31 20:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2010-Mar-31 20:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.131 (still bad) 2010-Mar-31 20:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.137 (still bad) 2010-Mar-31 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.127 (still bad) 2010-Mar-31 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.126 (still bad) 2010-Mar-31 20:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.130 (still bad) 2010-Mar-31 20:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.127 (still bad) 2010-Mar-31 20:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.128 (still bad) 2010-Mar-31 20:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.136 (still bad) 2010-Mar-31 20:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.127 (still bad) 2010-Mar-31 20:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.130 (still bad) 2010-Mar-31 20:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.131 (still bad) 2010-Mar-31 20:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.136 (still bad) 2010-Mar-31 20:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.129 (still bad) 2010-Mar-31 20:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.130 (still bad) 2010-Mar-31 20:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.131 (still bad) 2010-Mar-31 20:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.129 (still bad) 2010-Mar-31 20:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.128 (still bad) 2010-Mar-31 20:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.137 (still bad) 2010-Mar-31 20:53:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.75)! 2010-Mar-31 20:53:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.130 0.977 0.959 2010-Mar-31 20:53:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.526 1.104 1.094 0.958 2010-Mar-31 20:53:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.851 1.117 0.970 2010-Mar-31 20:53:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.879 0.978 1.021 2010-Mar-31 20:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.128 (still bad) 2010-Mar-31 20:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.129 (still bad) 2010-Mar-31 20:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.126 (still bad) 2010-Mar-31 20:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.128 (still bad) 2010-Mar-31 20:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.137 (still bad) 2010-Mar-31 20:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.127 (still bad) 2010-Mar-31 20:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.127 (still bad) 2010-Mar-31 20:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.131 (still bad) 2010-Mar-31 20:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.128 (still bad) 2010-Mar-31 20:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.129 (still bad) 2010-Mar-31 20:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.139 (still bad) 2010-Mar-31 20:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.130 (still bad) 2010-Mar-31 20:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.131 (still bad) 2010-Mar-31 20:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.132 (still bad) 2010-Mar-31 20:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.130 (still bad) 2010-Mar-31 20:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.131 (still bad) 2010-Mar-31 20:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.131 (still bad) 2010-Mar-31 20:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.131 (still bad) 2010-Mar-31 20:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.130 (still bad) 2010-Mar-31 20:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.134 (still bad) 2010-Mar-31 20:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.135 (still bad) 2010-Mar-31 20:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.131 (still bad) 2010-Mar-31 20:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.128 (still bad) 2010-Mar-31 20:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.131 (still bad) 2010-Mar-31 20:54:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 20:54:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.128 0.976 0.957 2010-Mar-31 20:54:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.103 1.090 0.955 2010-Mar-31 20:54:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.848 1.119 0.970 2010-Mar-31 20:54:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.878 0.978 1.017 2010-Mar-31 20:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.128 (still bad) 2010-Mar-31 20:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.128 (still bad) 2010-Mar-31 20:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.127 (still bad) 2010-Mar-31 20:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.130 (still bad) 2010-Mar-31 20:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.130 (still bad) 2010-Mar-31 20:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.130 (still bad) 2010-Mar-31 20:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.130 (still bad) 2010-Mar-31 20:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.131 (still bad) 2010-Mar-31 20:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.133 (still bad) 2010-Mar-31 20:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.131 (still bad) 2010-Mar-31 20:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.128 (still bad) 2010-Mar-31 20:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.129 (still bad) 2010-Mar-31 20:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.130 (still bad) 2010-Mar-31 20:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.129 (still bad) 2010-Mar-31 20:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.132 (still bad) 2010-Mar-31 20:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 20:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.129 (still bad) 2010-Mar-31 20:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.131 (still bad) 2010-Mar-31 20:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.131 (still bad) 2010-Mar-31 20:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.133 (still bad) 2010-Mar-31 20:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.132 (still bad) 2010-Mar-31 20:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.132 (still bad) 2010-Mar-31 20:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 20:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.129 (still bad) 2010-Mar-31 20:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.132 (still bad) 2010-Mar-31 20:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 20:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.130 (still bad) 2010-Mar-31 20:55:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 20:55:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.130 0.977 0.957 2010-Mar-31 20:55:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.106 1.090 0.956 2010-Mar-31 20:55:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.851 1.124 0.971 2010-Mar-31 20:55:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.880 0.981 1.019 2010-Mar-31 20:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 20:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2010-Mar-31 20:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.138 (still bad) 2010-Mar-31 20:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.132 (still bad) 2010-Mar-31 20:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.131 (still bad) 2010-Mar-31 20:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.132 (still bad) 2010-Mar-31 20:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.129 (still bad) 2010-Mar-31 20:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.132 (still bad) 2010-Mar-31 20:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.134 (still bad) 2010-Mar-31 20:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.130 (still bad) 2010-Mar-31 20:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.134 (still bad) 2010-Mar-31 20:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.133 (still bad) 2010-Mar-31 20:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 20:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.137 (still bad) 2010-Mar-31 20:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.132 (still bad) 2010-Mar-31 20:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.138 (still bad) 2010-Mar-31 20:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.133 (still bad) 2010-Mar-31 20:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.137 (still bad) 2010-Mar-31 20:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.142 (still bad) 2010-Mar-31 20:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.137 (still bad) 2010-Mar-31 20:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.134 (still bad) 2010-Mar-31 20:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.137 (still bad) 2010-Mar-31 20:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.592 and 1.134 (still bad) 2010-Mar-31 20:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.616 and 1.137 (still bad) 2010-Mar-31 20:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.137 (still bad) 2010-Mar-31 20:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.632 and 1.132 (still bad) 2010-Mar-31 20:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.133 (still bad) 2010-Mar-31 20:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.640 < 0.75)! 2010-Mar-31 20:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.134 0.981 0.960 2010-Mar-31 20:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.640 1.109 1.094 0.958 2010-Mar-31 20:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.851 1.121 0.971 2010-Mar-31 20:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.885 0.981 1.026 2010-Mar-31 20:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.130 (still bad) 2010-Mar-31 20:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.131 (still bad) 2010-Mar-31 20:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.136 (still bad) 2010-Mar-31 20:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.130 (still bad) 2010-Mar-31 20:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.131 (still bad) 2010-Mar-31 20:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.134 (still bad) 2010-Mar-31 20:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.132 (still bad) 2010-Mar-31 20:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.133 (still bad) 2010-Mar-31 20:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.140 (still bad) 2010-Mar-31 20:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.134 (still bad) 2010-Mar-31 20:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.132 (still bad) 2010-Mar-31 20:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.134 (still bad) 2010-Mar-31 20:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.132 (still bad) 2010-Mar-31 20:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.133 (still bad) 2010-Mar-31 20:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.142 (still bad) 2010-Mar-31 20:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.136 (still bad) 2010-Mar-31 20:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.135 (still bad) 2010-Mar-31 20:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.136 (still bad) 2010-Mar-31 20:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.135 (still bad) 2010-Mar-31 20:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.138 (still bad) 2010-Mar-31 20:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.136 (still bad) 2010-Mar-31 20:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.133 (still bad) 2010-Mar-31 20:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.135 (still bad) 2010-Mar-31 20:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.133 (still bad) 2010-Mar-31 20:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.136 (still bad) 2010-Mar-31 20:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.137 (still bad) 2010-Mar-31 20:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.134 (still bad) 2010-Mar-31 20:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.136 (still bad) 2010-Mar-31 20:57:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Mar-31 20:57:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.136 0.980 0.958 2010-Mar-31 20:57:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.107 1.098 0.962 2010-Mar-31 20:57:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.858 1.121 0.971 2010-Mar-31 20:57:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.881 0.982 1.021 2010-Mar-31 20:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.134 (still bad) 2010-Mar-31 20:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.136 (still bad) 2010-Mar-31 20:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.136 (still bad) 2010-Mar-31 20:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.134 (still bad) 2010-Mar-31 20:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.136 (still bad) 2010-Mar-31 20:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.135 (still bad) 2010-Mar-31 20:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.134 (still bad) 2010-Mar-31 20:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.138 (still bad) 2010-Mar-31 20:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.135 (still bad) 2010-Mar-31 20:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.135 (still bad) 2010-Mar-31 20:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.135 (still bad) 2010-Mar-31 20:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.132 (still bad) 2010-Mar-31 20:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.136 (still bad) 2010-Mar-31 20:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2010-Mar-31 20:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.134 (still bad) 2010-Mar-31 20:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 20:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:58:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:58:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:58:28 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Mar-31 20:58:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:58:28 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2010-Mar-31 20:58:28 LOG1 fixed_driftmap: New position: year = 2010.2487992749766 RA = 09:35:26.8 RA/Dec = 09:36:03.1 +19:17:49.8 2010-Mar-31 20:58:28 NOTE fixed_driftmap: Correcting ZA to 6:32:49.1 ... 2010-Mar-31 20:58:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5469608427 -CF 2010-Mar-31 20:58:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 20:58:28 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 20:58:28 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Mar-31 20:58:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 20:58:28 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 20:58:28 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Mar-31 20:58:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 20:58:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 20:58:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:58:28 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 20:58:28 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5469608427 -CF 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 20:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.133 (still bad) 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:58:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 20:58:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 20:58:28 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 20:58:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:58:29 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 20:58:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:58:29 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 20:58:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:58:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:58:29 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:58:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 20:58:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 20:58:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:58:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 20:58:29 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 20:58:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 20:58:29 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 20:58:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 20:58:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 20:58:29 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 20:58:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 20:58:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 20:58:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:58:29 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:58:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 20:58:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:58:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:58:29 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 20:58:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:58:29 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 20:58:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:58:29 INFO2 take_data: Starting WAPP 1-second scan: 9000079 2010-Mar-31 20:58:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:58:29 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Mar-31 20:58:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:58:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 20:58:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3510.00 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 20:58:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 20:58:31 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Mar-31 20:58:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 20:58:31 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Mar-31 20:58:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 20:58:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 20:58:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 20:58:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 20:58:31 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Mar-31 20:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.563 (still bad) 2010-Mar-31 20:58:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 20:58:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 20:58:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 20:58:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 20:58:31 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Mar-31 20:58:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 20:58:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 20:58:31 LOG5 finish_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Mar-31 20:58:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 20:58:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 20:58:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 20:58:32 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Mar-31 20:58:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Mar-31 20:58:32 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Mar-31 20:58:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:58:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:58:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:58:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 20:58:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 20:58:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 20:58:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 20:58:32 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2010-Mar-31 20:58:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 20:58:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 20:58:32 INFO2 take_data: Starting WAPP 600-second scan: 9000080 2010-Mar-31 20:58:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 20:58:32 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Mar-31 20:58:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 20:58:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 20:58:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 20:58:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3513.00 2010-Mar-31 20:58:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0010.fits 2010-Mar-31 20:58:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0010.fits} 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 20:58:34 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 20:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.541 (still bad) 2010-Mar-31 20:58:36 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 20:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.136 (still bad) 2010-Mar-31 20:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.134 (still bad) 2010-Mar-31 20:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 20:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.137 (still bad) 2010-Mar-31 20:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.136 (still bad) 2010-Mar-31 20:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.135 (still bad) 2010-Mar-31 20:58:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 20:58:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.133 0.981 0.960 2010-Mar-31 20:58:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.109 1.094 0.958 2010-Mar-31 20:58:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.855 1.123 0.969 2010-Mar-31 20:58:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.883 0.980 1.024 2010-Mar-31 20:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.135 (still bad) 2010-Mar-31 20:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.136 (still bad) 2010-Mar-31 20:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 20:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.133 (still bad) 2010-Mar-31 20:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.135 (still bad) 2010-Mar-31 20:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.135 (still bad) 2010-Mar-31 20:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.136 (still bad) 2010-Mar-31 20:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.135 (still bad) 2010-Mar-31 20:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.133 (still bad) 2010-Mar-31 20:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.132 (still bad) 2010-Mar-31 20:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.133 (still bad) 2010-Mar-31 20:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.133 (still bad) 2010-Mar-31 20:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.134 (still bad) 2010-Mar-31 20:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.138 (still bad) 2010-Mar-31 20:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.133 (still bad) 2010-Mar-31 20:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 20:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.135 (still bad) 2010-Mar-31 20:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.134 (still bad) 2010-Mar-31 20:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 20:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.143 (still bad) 2010-Mar-31 20:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 20:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 20:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.133 (still bad) 2010-Mar-31 20:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 20:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.144 (still bad) 2010-Mar-31 20:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.136 (still bad) 2010-Mar-31 20:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.137 (still bad) 2010-Mar-31 20:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.136 (still bad) 2010-Mar-31 20:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 20:59:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2010-Mar-31 20:59:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.135 0.984 0.963 2010-Mar-31 20:59:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.515 1.109 1.096 0.961 2010-Mar-31 20:59:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.851 1.122 0.968 2010-Mar-31 20:59:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.881 0.981 1.021 2010-Mar-31 20:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.141 (still bad) 2010-Mar-31 20:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.134 (still bad) 2010-Mar-31 20:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.133 (still bad) 2010-Mar-31 21:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.137 (still bad) 2010-Mar-31 21:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.133 (still bad) 2010-Mar-31 21:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.136 (still bad) 2010-Mar-31 21:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.144 (still bad) 2010-Mar-31 21:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 21:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.139 (still bad) 2010-Mar-31 21:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.141 (still bad) 2010-Mar-31 21:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.140 (still bad) 2010-Mar-31 21:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.142 (still bad) 2010-Mar-31 21:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.148 (still bad) 2010-Mar-31 21:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.138 (still bad) 2010-Mar-31 21:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.140 (still bad) 2010-Mar-31 21:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.138 (still bad) 2010-Mar-31 21:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.135 (still bad) 2010-Mar-31 21:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.137 (still bad) 2010-Mar-31 21:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.144 (still bad) 2010-Mar-31 21:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.138 (still bad) 2010-Mar-31 21:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.140 (still bad) 2010-Mar-31 21:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.137 (still bad) 2010-Mar-31 21:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.136 (still bad) 2010-Mar-31 21:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.146 (still bad) 2010-Mar-31 21:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.137 (still bad) 2010-Mar-31 21:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.138 (still bad) 2010-Mar-31 21:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.134 (still bad) 2010-Mar-31 21:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.134 (still bad) 2010-Mar-31 21:00:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.523 < 0.75)! 2010-Mar-31 21:00:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.137 0.983 0.964 2010-Mar-31 21:00:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.523 1.113 1.094 0.960 2010-Mar-31 21:00:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.852 1.126 0.973 2010-Mar-31 21:00:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.882 0.982 1.023 2010-Mar-31 21:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.137 (still bad) 2010-Mar-31 21:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.136 (still bad) 2010-Mar-31 21:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.135 (still bad) 2010-Mar-31 21:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.136 (still bad) 2010-Mar-31 21:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 21:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.139 (still bad) 2010-Mar-31 21:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.138 (still bad) 2010-Mar-31 21:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.135 (still bad) 2010-Mar-31 21:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 21:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.135 (still bad) 2010-Mar-31 21:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.133 (still bad) 2010-Mar-31 21:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.137 (still bad) 2010-Mar-31 21:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.137 (still bad) 2010-Mar-31 21:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.137 (still bad) 2010-Mar-31 21:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.134 (still bad) 2010-Mar-31 21:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.137 (still bad) 2010-Mar-31 21:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.138 (still bad) 2010-Mar-31 21:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.139 (still bad) 2010-Mar-31 21:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.140 (still bad) 2010-Mar-31 21:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.142 (still bad) 2010-Mar-31 21:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.146 (still bad) 2010-Mar-31 21:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.145 (still bad) 2010-Mar-31 21:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.148 (still bad) 2010-Mar-31 21:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.145 (still bad) 2010-Mar-31 21:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.142 (still bad) 2010-Mar-31 21:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.141 (still bad) 2010-Mar-31 21:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.138 (still bad) 2010-Mar-31 21:01:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 21:01:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.134 0.982 0.961 2010-Mar-31 21:01:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.110 1.094 0.958 2010-Mar-31 21:01:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.854 1.124 0.972 2010-Mar-31 21:01:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.883 0.984 1.025 2010-Mar-31 21:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.136 (still bad) 2010-Mar-31 21:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2010-Mar-31 21:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.135 (still bad) 2010-Mar-31 21:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 21:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.134 (still bad) 2010-Mar-31 21:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.132 (still bad) 2010-Mar-31 21:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.134 (still bad) 2010-Mar-31 21:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.135 (still bad) 2010-Mar-31 21:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 21:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 21:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.133 (still bad) 2010-Mar-31 21:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.135 (still bad) 2010-Mar-31 21:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.134 (still bad) 2010-Mar-31 21:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 21:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.135 (still bad) 2010-Mar-31 21:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.135 (still bad) 2010-Mar-31 21:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.135 (still bad) 2010-Mar-31 21:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.145 (still bad) 2010-Mar-31 21:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 21:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.135 (still bad) 2010-Mar-31 21:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.140 (still bad) 2010-Mar-31 21:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.135 (still bad) 2010-Mar-31 21:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 21:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.132 (still bad) 2010-Mar-31 21:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.132 (still bad) 2010-Mar-31 21:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.141 (still bad) 2010-Mar-31 21:02:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.75)! 2010-Mar-31 21:02:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.134 0.982 0.961 2010-Mar-31 21:02:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.529 1.110 1.091 0.957 2010-Mar-31 21:02:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.851 1.122 0.969 2010-Mar-31 21:02:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.881 0.983 1.024 2010-Mar-31 21:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 21:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 21:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.133 (still bad) 2010-Mar-31 21:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.133 (still bad) 2010-Mar-31 21:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.141 (still bad) 2010-Mar-31 21:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.133 (still bad) 2010-Mar-31 21:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.134 (still bad) 2010-Mar-31 21:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.134 (still bad) 2010-Mar-31 21:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.136 (still bad) 2010-Mar-31 21:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 21:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.142 (still bad) 2010-Mar-31 21:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 21:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 21:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.137 (still bad) 2010-Mar-31 21:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.134 (still bad) 2010-Mar-31 21:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.135 (still bad) 2010-Mar-31 21:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.142 (still bad) 2010-Mar-31 21:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.132 (still bad) 2010-Mar-31 21:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 21:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.135 (still bad) 2010-Mar-31 21:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.132 (still bad) 2010-Mar-31 21:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.133 (still bad) 2010-Mar-31 21:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.142 (still bad) 2010-Mar-31 21:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.134 (still bad) 2010-Mar-31 21:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.133 (still bad) 2010-Mar-31 21:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.137 (still bad) 2010-Mar-31 21:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.134 (still bad) 2010-Mar-31 21:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2010-Mar-31 21:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.144 (still bad) 2010-Mar-31 21:03:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.521 < 0.75)! 2010-Mar-31 21:03:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.135 0.982 0.960 2010-Mar-31 21:03:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.521 1.109 1.116 0.975 2010-Mar-31 21:03:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.851 1.119 0.968 2010-Mar-31 21:03:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.881 0.982 1.022 2010-Mar-31 21:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.133 (still bad) 2010-Mar-31 21:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.136 (still bad) 2010-Mar-31 21:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.134 (still bad) 2010-Mar-31 21:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.135 (still bad) 2010-Mar-31 21:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.135 (still bad) 2010-Mar-31 21:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2010-Mar-31 21:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 21:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.136 (still bad) 2010-Mar-31 21:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.133 (still bad) 2010-Mar-31 21:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 21:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.135 (still bad) 2010-Mar-31 21:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.134 (still bad) 2010-Mar-31 21:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.133 (still bad) 2010-Mar-31 21:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2010-Mar-31 21:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.134 (still bad) 2010-Mar-31 21:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.134 (still bad) 2010-Mar-31 21:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.134 (still bad) 2010-Mar-31 21:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.131 (still bad) 2010-Mar-31 21:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.133 (still bad) 2010-Mar-31 21:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.133 (still bad) 2010-Mar-31 21:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.134 (still bad) 2010-Mar-31 21:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.136 (still bad) 2010-Mar-31 21:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.133 (still bad) 2010-Mar-31 21:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.134 (still bad) 2010-Mar-31 21:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.132 (still bad) 2010-Mar-31 21:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.129 (still bad) 2010-Mar-31 21:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.132 (still bad) 2010-Mar-31 21:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 21:04:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2010-Mar-31 21:04:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.133 0.982 0.964 2010-Mar-31 21:04:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.518 1.112 1.094 0.957 2010-Mar-31 21:04:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.852 1.124 0.971 2010-Mar-31 21:04:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.882 0.981 1.022 2010-Mar-31 21:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.132 (still bad) 2010-Mar-31 21:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.134 (still bad) 2010-Mar-31 21:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.133 (still bad) 2010-Mar-31 21:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.133 (still bad) 2010-Mar-31 21:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.134 (still bad) 2010-Mar-31 21:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.133 (still bad) 2010-Mar-31 21:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.130 (still bad) 2010-Mar-31 21:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.134 (still bad) 2010-Mar-31 21:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.131 (still bad) 2010-Mar-31 21:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.131 (still bad) 2010-Mar-31 21:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.138 (still bad) 2010-Mar-31 21:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 21:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.134 (still bad) 2010-Mar-31 21:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.133 (still bad) 2010-Mar-31 21:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.133 (still bad) 2010-Mar-31 21:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.134 (still bad) 2010-Mar-31 21:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.132 (still bad) 2010-Mar-31 21:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.132 (still bad) 2010-Mar-31 21:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.133 (still bad) 2010-Mar-31 21:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.133 (still bad) 2010-Mar-31 21:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.132 (still bad) 2010-Mar-31 21:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.597 and 1.136 (still bad) 2010-Mar-31 21:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.131 (still bad) 2010-Mar-31 21:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.131 (still bad) 2010-Mar-31 21:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.129 (still bad) 2010-Mar-31 21:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.131 (still bad) 2010-Mar-31 21:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.136 (still bad) 2010-Mar-31 21:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.133 (still bad) 2010-Mar-31 21:06:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.699 < 0.75)! 2010-Mar-31 21:06:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.132 0.978 0.957 2010-Mar-31 21:06:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.699 1.106 1.092 0.956 2010-Mar-31 21:06:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.850 1.122 0.967 2010-Mar-31 21:06:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.881 0.981 1.021 2010-Mar-31 21:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.134 (still bad) 2010-Mar-31 21:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.129 (still bad) 2010-Mar-31 21:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.131 (still bad) 2010-Mar-31 21:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.135 (still bad) 2010-Mar-31 21:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.132 (still bad) 2010-Mar-31 21:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.130 (still bad) 2010-Mar-31 21:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.131 (still bad) 2010-Mar-31 21:06:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.130 2010-Mar-31 21:06:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2010-Mar-31 21:06:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.130 0.980 0.960 2010-Mar-31 21:06:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.735 1.107 1.094 0.958 2010-Mar-31 21:06:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.852 1.119 0.967 2010-Mar-31 21:06:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.881 0.982 1.021 2010-Mar-31 21:06:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.755 and 1.139 2010-Mar-31 21:06:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.704 < 0.75)! 2010-Mar-31 21:06:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.130 0.979 0.958 2010-Mar-31 21:06:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.704 1.110 1.094 0.959 2010-Mar-31 21:06:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.122 0.969 2010-Mar-31 21:06:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.883 0.983 1.022 2010-Mar-31 21:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.130 (still bad) 2010-Mar-31 21:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.133 (still bad) 2010-Mar-31 21:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.643 and 1.131 (still bad) 2010-Mar-31 21:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.643 and 1.131 (still bad) 2010-Mar-31 21:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.138 (still bad) 2010-Mar-31 21:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.131 (still bad) 2010-Mar-31 21:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.130 (still bad) 2010-Mar-31 21:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.131 (still bad) 2010-Mar-31 21:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.128 (still bad) 2010-Mar-31 21:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.131 (still bad) 2010-Mar-31 21:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.140 (still bad) 2010-Mar-31 21:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.130 (still bad) 2010-Mar-31 21:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.130 (still bad) 2010-Mar-31 21:06:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.772 and 1.133 2010-Mar-31 21:06:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.75)! 2010-Mar-31 21:06:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.131 0.979 0.959 2010-Mar-31 21:06:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 1.107 1.091 0.957 2010-Mar-31 21:06:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.119 0.968 2010-Mar-31 21:06:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.882 0.981 1.022 2010-Mar-31 21:06:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.773 and 1.133 2010-Mar-31 21:07:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.723 < 0.75)! 2010-Mar-31 21:07:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.130 0.980 0.959 2010-Mar-31 21:07:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.723 1.107 1.093 0.956 2010-Mar-31 21:07:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.849 1.122 0.968 2010-Mar-31 21:07:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.880 0.980 1.021 2010-Mar-31 21:07:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.764 and 1.133 2010-Mar-31 21:07:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.75)! 2010-Mar-31 21:07:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.132 0.980 0.960 2010-Mar-31 21:07:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.740 1.110 1.093 0.957 2010-Mar-31 21:07:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.119 0.968 2010-Mar-31 21:07:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.881 0.981 1.021 2010-Mar-31 21:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.133 (still bad) 2010-Mar-31 21:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.142 (still bad) 2010-Mar-31 21:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.134 (still bad) 2010-Mar-31 21:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.131 (still bad) 2010-Mar-31 21:07:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.765 and 1.134 2010-Mar-31 21:07:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.75)! 2010-Mar-31 21:07:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.132 0.979 0.960 2010-Mar-31 21:07:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.740 1.106 1.094 0.958 2010-Mar-31 21:07:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.849 1.119 0.968 2010-Mar-31 21:07:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.882 0.982 1.023 2010-Mar-31 21:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.136 (still bad) 2010-Mar-31 21:07:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.762 and 1.147 2010-Mar-31 21:07:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.741 < 0.75)! 2010-Mar-31 21:07:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.135 0.981 0.963 2010-Mar-31 21:07:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.741 1.110 1.094 0.960 2010-Mar-31 21:07:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.851 1.121 0.969 2010-Mar-31 21:07:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.882 0.983 1.022 2010-Mar-31 21:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.136 (still bad) 2010-Mar-31 21:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.136 (still bad) 2010-Mar-31 21:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.137 (still bad) 2010-Mar-31 21:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.133 (still bad) 2010-Mar-31 21:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.134 (still bad) 2010-Mar-31 21:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.132 (still bad) 2010-Mar-31 21:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.133 (still bad) 2010-Mar-31 21:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.133 (still bad) 2010-Mar-31 21:07:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.785 and 1.136 2010-Mar-31 21:07:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.75)! 2010-Mar-31 21:07:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.132 0.980 0.961 2010-Mar-31 21:07:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.743 1.110 1.096 0.958 2010-Mar-31 21:07:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.850 1.120 0.969 2010-Mar-31 21:07:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.881 0.980 1.021 2010-Mar-31 21:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.132 (still bad) 2010-Mar-31 21:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.133 (still bad) 2010-Mar-31 21:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.136 (still bad) 2010-Mar-31 21:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.138 (still bad) 2010-Mar-31 21:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.134 (still bad) 2010-Mar-31 21:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.134 (still bad) 2010-Mar-31 21:08:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.787 and 1.133 2010-Mar-31 21:08:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Mar-31 21:08:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.134 0.981 0.959 2010-Mar-31 21:08:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.729 1.109 1.094 0.956 2010-Mar-31 21:08:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.852 1.120 0.970 2010-Mar-31 21:08:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.885 0.981 1.024 2010-Mar-31 21:08:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.768 and 1.135 2010-Mar-31 21:08:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.75)! 2010-Mar-31 21:08:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.133 0.982 0.961 2010-Mar-31 21:08:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.748 1.108 1.094 0.956 2010-Mar-31 21:08:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.851 1.121 0.971 2010-Mar-31 21:08:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.885 0.983 1.025 2010-Mar-31 21:08:17 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.779 and 1.134 2010-Mar-31 21:08:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.75)! 2010-Mar-31 21:08:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.133 0.985 0.965 2010-Mar-31 21:08:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.743 1.109 1.095 0.960 2010-Mar-31 21:08:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.120 0.970 2010-Mar-31 21:08:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.883 0.982 1.022 2010-Mar-31 21:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.135 (still bad) 2010-Mar-31 21:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.133 (still bad) 2010-Mar-31 21:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.134 (still bad) 2010-Mar-31 21:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.134 (still bad) 2010-Mar-31 21:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.133 (still bad) 2010-Mar-31 21:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.132 (still bad) 2010-Mar-31 21:08:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:08:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:08:33 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Mar-31 21:08:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:08:33 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2010-Mar-31 21:08:33 LOG1 fixed_driftmap: New position: year = 2010.2488184462695 RA = 09:45:30.2 RA/Dec = 09:46:06.4 +19:17:44.2 2010-Mar-31 21:08:33 NOTE fixed_driftmap: Correcting ZA to 6:32:04.1 ... 2010-Mar-31 21:08:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5344852806 -CF 2010-Mar-31 21:08:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:08:33 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:08:33 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Mar-31 21:08:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:08:33 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:08:33 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Mar-31 21:08:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:08:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:08:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:08:33 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:08:33 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2010-Mar-31 21:08:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5344852806 -CF 2010-Mar-31 21:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:08:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.134 (still bad) 2010-Mar-31 21:08:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:08:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:08:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:08:34 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:08:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:08:34 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:08:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:08:34 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:08:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:08:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:08:34 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:08:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:08:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:08:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:08:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:08:34 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:08:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:08:34 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:08:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:08:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:08:34 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:08:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:08:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:08:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:08:34 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:08:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:08:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:08:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:08:34 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:08:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:08:34 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:08:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:08:34 INFO2 take_data: Starting WAPP 1-second scan: 9000081 2010-Mar-31 21:08:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:08:34 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Mar-31 21:08:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:08:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:08:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4115.00 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:08:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:08:36 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:08:36 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:08:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:08:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:08:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:08:36 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:08:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:08:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:08:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:08:36 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:08:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:08:36 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:08:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:08:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:08:36 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Mar-31 21:08:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Mar-31 21:08:36 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Mar-31 21:08:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:08:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:08:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:08:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:08:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:08:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:08:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:08:37 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2010-Mar-31 21:08:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:08:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:08:37 INFO2 take_data: Starting WAPP 600-second scan: 9000082 2010-Mar-31 21:08:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:08:37 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Mar-31 21:08:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:08:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.852 and 1.552 2010-Mar-31 21:08:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:08:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:08:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4118.00 2010-Mar-31 21:08:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0011.fits 2010-Mar-31 21:08:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0011.fits} 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:08:39 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 21:08:41 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 21:08:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.75)! 2010-Mar-31 21:08:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.133 0.981 0.962 2010-Mar-31 21:08:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.733 1.107 1.095 0.958 2010-Mar-31 21:08:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.850 1.119 0.969 2010-Mar-31 21:08:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.882 0.981 1.022 2010-Mar-31 21:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.133 (still bad) 2010-Mar-31 21:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.141 (still bad) 2010-Mar-31 21:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.135 (still bad) 2010-Mar-31 21:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.717 and 1.133 (still bad) 2010-Mar-31 21:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.137 (still bad) 2010-Mar-31 21:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.134 (still bad) 2010-Mar-31 21:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.134 (still bad) 2010-Mar-31 21:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.144 (still bad) 2010-Mar-31 21:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.136 (still bad) 2010-Mar-31 21:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.134 (still bad) 2010-Mar-31 21:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.136 (still bad) 2010-Mar-31 21:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.135 (still bad) 2010-Mar-31 21:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.136 (still bad) 2010-Mar-31 21:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.138 (still bad) 2010-Mar-31 21:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.136 (still bad) 2010-Mar-31 21:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.634 and 1.135 (still bad) 2010-Mar-31 21:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.136 (still bad) 2010-Mar-31 21:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.134 (still bad) 2010-Mar-31 21:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.135 (still bad) 2010-Mar-31 21:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.139 (still bad) 2010-Mar-31 21:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.134 (still bad) 2010-Mar-31 21:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.134 (still bad) 2010-Mar-31 21:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.135 (still bad) 2010-Mar-31 21:09:29 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.813 and 1.132 2010-Mar-31 21:09:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.635 < 0.75)! 2010-Mar-31 21:09:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.141 0.986 0.964 2010-Mar-31 21:09:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.635 1.115 1.099 0.962 2010-Mar-31 21:09:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.853 1.125 0.972 2010-Mar-31 21:09:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.883 0.984 1.025 2010-Mar-31 21:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.136 (still bad) 2010-Mar-31 21:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.136 (still bad) 2010-Mar-31 21:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.136 (still bad) 2010-Mar-31 21:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.134 (still bad) 2010-Mar-31 21:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.138 (still bad) 2010-Mar-31 21:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.144 (still bad) 2010-Mar-31 21:09:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.769 and 1.138 2010-Mar-31 21:09:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.75)! 2010-Mar-31 21:09:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.135 0.983 0.962 2010-Mar-31 21:09:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.746 1.111 1.095 0.959 2010-Mar-31 21:09:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.853 1.121 0.969 2010-Mar-31 21:09:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.882 0.982 1.024 2010-Mar-31 21:09:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.137 2010-Mar-31 21:09:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.656 < 0.75)! 2010-Mar-31 21:09:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.137 0.984 0.963 2010-Mar-31 21:09:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.656 1.110 1.095 0.959 2010-Mar-31 21:09:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.851 1.123 0.969 2010-Mar-31 21:09:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.881 0.983 1.022 2010-Mar-31 21:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.134 (still bad) 2010-Mar-31 21:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.145 (still bad) 2010-Mar-31 21:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.137 (still bad) 2010-Mar-31 21:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.132 (still bad) 2010-Mar-31 21:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.136 (still bad) 2010-Mar-31 21:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.135 (still bad) 2010-Mar-31 21:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.137 (still bad) 2010-Mar-31 21:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.149 (still bad) 2010-Mar-31 21:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.138 (still bad) 2010-Mar-31 21:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.137 (still bad) 2010-Mar-31 21:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.137 (still bad) 2010-Mar-31 21:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.135 (still bad) 2010-Mar-31 21:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.133 (still bad) 2010-Mar-31 21:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.147 (still bad) 2010-Mar-31 21:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.134 (still bad) 2010-Mar-31 21:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.134 (still bad) 2010-Mar-31 21:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.137 (still bad) 2010-Mar-31 21:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.132 (still bad) 2010-Mar-31 21:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.133 (still bad) 2010-Mar-31 21:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.144 (still bad) 2010-Mar-31 21:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.135 (still bad) 2010-Mar-31 21:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.132 (still bad) 2010-Mar-31 21:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.136 (still bad) 2010-Mar-31 21:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.133 (still bad) 2010-Mar-31 21:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.134 (still bad) 2010-Mar-31 21:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.144 (still bad) 2010-Mar-31 21:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.133 (still bad) 2010-Mar-31 21:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.136 (still bad) 2010-Mar-31 21:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.134 (still bad) 2010-Mar-31 21:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.134 (still bad) 2010-Mar-31 21:10:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 21:10:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.137 0.988 0.965 2010-Mar-31 21:10:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.112 1.097 0.961 2010-Mar-31 21:10:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.854 1.128 0.972 2010-Mar-31 21:10:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.885 0.986 1.025 2010-Mar-31 21:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.134 (still bad) 2010-Mar-31 21:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.135 (still bad) 2010-Mar-31 21:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.136 (still bad) 2010-Mar-31 21:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.132 (still bad) 2010-Mar-31 21:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.136 (still bad) 2010-Mar-31 21:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.137 (still bad) 2010-Mar-31 21:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.138 (still bad) 2010-Mar-31 21:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.136 (still bad) 2010-Mar-31 21:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.136 (still bad) 2010-Mar-31 21:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.135 (still bad) 2010-Mar-31 21:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.136 (still bad) 2010-Mar-31 21:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.135 (still bad) 2010-Mar-31 21:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.137 (still bad) 2010-Mar-31 21:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.135 (still bad) 2010-Mar-31 21:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.137 (still bad) 2010-Mar-31 21:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.135 (still bad) 2010-Mar-31 21:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 21:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.137 (still bad) 2010-Mar-31 21:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.138 (still bad) 2010-Mar-31 21:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.136 (still bad) 2010-Mar-31 21:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.136 (still bad) 2010-Mar-31 21:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.138 (still bad) 2010-Mar-31 21:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.138 (still bad) 2010-Mar-31 21:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.138 (still bad) 2010-Mar-31 21:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.137 (still bad) 2010-Mar-31 21:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.135 (still bad) 2010-Mar-31 21:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.138 (still bad) 2010-Mar-31 21:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.138 (still bad) 2010-Mar-31 21:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.137 (still bad) 2010-Mar-31 21:11:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.537 < 0.75)! 2010-Mar-31 21:11:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.140 0.987 0.962 2010-Mar-31 21:11:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.537 1.110 1.101 0.964 2010-Mar-31 21:11:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.852 1.126 0.971 2010-Mar-31 21:11:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.885 0.987 1.026 2010-Mar-31 21:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.142 (still bad) 2010-Mar-31 21:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.142 (still bad) 2010-Mar-31 21:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.142 (still bad) 2010-Mar-31 21:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.143 (still bad) 2010-Mar-31 21:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.143 (still bad) 2010-Mar-31 21:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.142 (still bad) 2010-Mar-31 21:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.141 (still bad) 2010-Mar-31 21:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.140 (still bad) 2010-Mar-31 21:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.138 (still bad) 2010-Mar-31 21:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.136 (still bad) 2010-Mar-31 21:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.140 (still bad) 2010-Mar-31 21:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.138 (still bad) 2010-Mar-31 21:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.138 (still bad) 2010-Mar-31 21:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.135 (still bad) 2010-Mar-31 21:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.137 (still bad) 2010-Mar-31 21:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.135 (still bad) 2010-Mar-31 21:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.137 (still bad) 2010-Mar-31 21:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.147 (still bad) 2010-Mar-31 21:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.139 (still bad) 2010-Mar-31 21:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.136 (still bad) 2010-Mar-31 21:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.140 (still bad) 2010-Mar-31 21:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.136 (still bad) 2010-Mar-31 21:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.144 (still bad) 2010-Mar-31 21:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.136 (still bad) 2010-Mar-31 21:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.136 (still bad) 2010-Mar-31 21:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.138 (still bad) 2010-Mar-31 21:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.136 (still bad) 2010-Mar-31 21:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.137 (still bad) 2010-Mar-31 21:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.520 < 0.75)! 2010-Mar-31 21:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.147 0.992 0.969 2010-Mar-31 21:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.520 1.119 1.102 0.966 2010-Mar-31 21:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.856 1.134 0.978 2010-Mar-31 21:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.889 0.990 1.032 2010-Mar-31 21:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.137 (still bad) 2010-Mar-31 21:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.138 (still bad) 2010-Mar-31 21:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.138 (still bad) 2010-Mar-31 21:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.140 (still bad) 2010-Mar-31 21:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.138 (still bad) 2010-Mar-31 21:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.136 (still bad) 2010-Mar-31 21:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.135 (still bad) 2010-Mar-31 21:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.136 (still bad) 2010-Mar-31 21:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.135 (still bad) 2010-Mar-31 21:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.135 (still bad) 2010-Mar-31 21:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.144 (still bad) 2010-Mar-31 21:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.134 (still bad) 2010-Mar-31 21:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.135 (still bad) 2010-Mar-31 21:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.137 (still bad) 2010-Mar-31 21:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.135 (still bad) 2010-Mar-31 21:13:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.830 and 1.135 2010-Mar-31 21:13:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:13:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.138 0.985 0.962 2010-Mar-31 21:13:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.111 1.095 0.958 2010-Mar-31 21:13:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.852 1.123 0.971 2010-Mar-31 21:13:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.883 0.985 1.024 2010-Mar-31 21:13:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.797 and 1.137 2010-Mar-31 21:13:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.680 < 0.75)! 2010-Mar-31 21:13:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.138 0.986 0.965 2010-Mar-31 21:13:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.680 1.115 1.096 0.958 2010-Mar-31 21:13:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.854 1.127 0.972 2010-Mar-31 21:13:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.884 0.986 1.026 2010-Mar-31 21:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.135 (still bad) 2010-Mar-31 21:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.136 (still bad) 2010-Mar-31 21:13:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.796 and 1.147 2010-Mar-31 21:13:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.719 < 0.75)! 2010-Mar-31 21:13:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.137 0.985 0.962 2010-Mar-31 21:13:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.719 1.113 1.095 0.957 2010-Mar-31 21:13:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.852 1.125 0.972 2010-Mar-31 21:13:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.884 0.984 1.024 2010-Mar-31 21:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.136 (still bad) 2010-Mar-31 21:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.136 (still bad) 2010-Mar-31 21:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.134 (still bad) 2010-Mar-31 21:13:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.136 2010-Mar-31 21:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2010-Mar-31 21:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.137 0.985 0.964 2010-Mar-31 21:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.735 1.112 1.096 0.958 2010-Mar-31 21:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.854 1.128 0.971 2010-Mar-31 21:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.883 0.985 1.023 2010-Mar-31 21:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.136 (still bad) 2010-Mar-31 21:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.137 (still bad) 2010-Mar-31 21:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.135 (still bad) 2010-Mar-31 21:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.137 (still bad) 2010-Mar-31 21:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.140 (still bad) 2010-Mar-31 21:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.137 (still bad) 2010-Mar-31 21:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.597 and 1.140 (still bad) 2010-Mar-31 21:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.138 (still bad) 2010-Mar-31 21:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.140 (still bad) 2010-Mar-31 21:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.148 (still bad) 2010-Mar-31 21:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.137 (still bad) 2010-Mar-31 21:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.137 (still bad) 2010-Mar-31 21:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.140 (still bad) 2010-Mar-31 21:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.139 (still bad) 2010-Mar-31 21:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.139 (still bad) 2010-Mar-31 21:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.148 (still bad) 2010-Mar-31 21:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.139 (still bad) 2010-Mar-31 21:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.135 (still bad) 2010-Mar-31 21:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.139 (still bad) 2010-Mar-31 21:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.135 (still bad) 2010-Mar-31 21:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.137 (still bad) 2010-Mar-31 21:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.148 (still bad) 2010-Mar-31 21:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.140 (still bad) 2010-Mar-31 21:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.138 (still bad) 2010-Mar-31 21:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.140 (still bad) 2010-Mar-31 21:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.138 (still bad) 2010-Mar-31 21:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.139 (still bad) 2010-Mar-31 21:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.147 (still bad) 2010-Mar-31 21:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.138 (still bad) 2010-Mar-31 21:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.523 < 0.75)! 2010-Mar-31 21:15:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.137 0.984 0.964 2010-Mar-31 21:15:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.523 1.111 1.097 0.960 2010-Mar-31 21:15:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.853 1.127 0.971 2010-Mar-31 21:15:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.883 0.986 1.024 2010-Mar-31 21:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.139 (still bad) 2010-Mar-31 21:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.137 (still bad) 2010-Mar-31 21:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.136 (still bad) 2010-Mar-31 21:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.146 (still bad) 2010-Mar-31 21:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.137 (still bad) 2010-Mar-31 21:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.137 (still bad) 2010-Mar-31 21:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.138 (still bad) 2010-Mar-31 21:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.135 (still bad) 2010-Mar-31 21:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.135 (still bad) 2010-Mar-31 21:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.146 (still bad) 2010-Mar-31 21:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.138 (still bad) 2010-Mar-31 21:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.137 (still bad) 2010-Mar-31 21:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.138 (still bad) 2010-Mar-31 21:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.138 (still bad) 2010-Mar-31 21:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.137 (still bad) 2010-Mar-31 21:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.143 (still bad) 2010-Mar-31 21:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.139 (still bad) 2010-Mar-31 21:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.136 (still bad) 2010-Mar-31 21:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.137 (still bad) 2010-Mar-31 21:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.134 (still bad) 2010-Mar-31 21:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.136 (still bad) 2010-Mar-31 21:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.144 (still bad) 2010-Mar-31 21:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.135 (still bad) 2010-Mar-31 21:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.136 (still bad) 2010-Mar-31 21:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.139 (still bad) 2010-Mar-31 21:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.137 (still bad) 2010-Mar-31 21:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.138 (still bad) 2010-Mar-31 21:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.140 (still bad) 2010-Mar-31 21:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.139 (still bad) 2010-Mar-31 21:16:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Mar-31 21:16:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.142 0.985 0.962 2010-Mar-31 21:16:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.112 1.098 0.961 2010-Mar-31 21:16:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.854 1.126 0.971 2010-Mar-31 21:16:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.883 0.986 1.023 2010-Mar-31 21:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.142 (still bad) 2010-Mar-31 21:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.143 (still bad) 2010-Mar-31 21:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.145 (still bad) 2010-Mar-31 21:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.141 (still bad) 2010-Mar-31 21:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.140 (still bad) 2010-Mar-31 21:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.142 (still bad) 2010-Mar-31 21:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.139 (still bad) 2010-Mar-31 21:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.140 (still bad) 2010-Mar-31 21:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.143 (still bad) 2010-Mar-31 21:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.139 (still bad) 2010-Mar-31 21:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.138 (still bad) 2010-Mar-31 21:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.636 and 1.139 (still bad) 2010-Mar-31 21:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.142 (still bad) 2010-Mar-31 21:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.607 and 1.143 (still bad) 2010-Mar-31 21:16:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.856 and 1.146 2010-Mar-31 21:16:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.665 < 0.75)! 2010-Mar-31 21:16:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.145 0.984 0.963 2010-Mar-31 21:16:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.665 1.115 1.097 0.960 2010-Mar-31 21:16:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.856 1.130 0.973 2010-Mar-31 21:16:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.879 0.987 1.021 2010-Mar-31 21:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.147 (still bad) 2010-Mar-31 21:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.144 (still bad) 2010-Mar-31 21:16:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.144 2010-Mar-31 21:16:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.75)! 2010-Mar-31 21:16:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.139 0.985 0.961 2010-Mar-31 21:16:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.746 1.113 1.099 0.961 2010-Mar-31 21:16:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.854 1.127 0.971 2010-Mar-31 21:16:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.880 0.987 1.021 2010-Mar-31 21:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.141 (still bad) 2010-Mar-31 21:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.138 (still bad) 2010-Mar-31 21:16:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.791 and 1.137 2010-Mar-31 21:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.75)! 2010-Mar-31 21:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.138 0.986 0.966 2010-Mar-31 21:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.700 1.115 1.100 0.962 2010-Mar-31 21:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.855 1.129 0.973 2010-Mar-31 21:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.882 0.988 1.023 2010-Mar-31 21:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.138 (still bad) 2010-Mar-31 21:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.141 (still bad) 2010-Mar-31 21:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.629 and 1.148 (still bad) 2010-Mar-31 21:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.140 (still bad) 2010-Mar-31 21:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.139 (still bad) 2010-Mar-31 21:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.142 (still bad) 2010-Mar-31 21:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.137 (still bad) 2010-Mar-31 21:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.139 (still bad) 2010-Mar-31 21:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.148 (still bad) 2010-Mar-31 21:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.138 (still bad) 2010-Mar-31 21:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.607 and 1.141 (still bad) 2010-Mar-31 21:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.139 (still bad) 2010-Mar-31 21:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.137 (still bad) 2010-Mar-31 21:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.139 (still bad) 2010-Mar-31 21:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.140 (still bad) 2010-Mar-31 21:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.138 (still bad) 2010-Mar-31 21:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.141 (still bad) 2010-Mar-31 21:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.138 (still bad) 2010-Mar-31 21:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.140 (still bad) 2010-Mar-31 21:17:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.791 and 1.144 2010-Mar-31 21:18:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.717 < 0.75)! 2010-Mar-31 21:18:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.138 0.986 0.964 2010-Mar-31 21:18:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.717 1.116 1.098 0.960 2010-Mar-31 21:18:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.855 1.126 0.971 2010-Mar-31 21:18:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.881 0.987 1.022 2010-Mar-31 21:18:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.802 and 1.138 2010-Mar-31 21:18:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Mar-31 21:18:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.137 0.987 0.963 2010-Mar-31 21:18:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.729 1.115 1.099 0.960 2010-Mar-31 21:18:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.853 1.126 0.971 2010-Mar-31 21:18:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.884 0.988 1.023 2010-Mar-31 21:18:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:18:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:18:38 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Mar-31 21:18:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:18:38 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2010-Mar-31 21:18:38 LOG1 fixed_driftmap: New position: year = 2010.2488376175627 RA = 09:55:33.9 RA/Dec = 09:56:09.9 +19:17:39.0 2010-Mar-31 21:18:38 NOTE fixed_driftmap: Correcting ZA to 6:31:21.9 ... 2010-Mar-31 21:18:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5227425424 -CF 2010-Mar-31 21:18:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:18:38 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:18:38 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Mar-31 21:18:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:18:38 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:18:38 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Mar-31 21:18:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:18:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:18:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:18:38 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:18:38 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5227425424 -CF 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:18:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:18:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:18:38 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:18:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:18:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:18:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:18:39 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:18:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:18:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:18:39 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:18:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:18:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:18:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:18:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:18:39 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:18:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:18:39 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:18:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:18:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:18:39 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:18:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:18:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:18:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:18:39 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:18:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:18:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:18:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:18:39 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:18:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:18:39 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:18:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:18:39 INFO2 take_data: Starting WAPP 1-second scan: 9000083 2010-Mar-31 21:18:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:18:39 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Mar-31 21:18:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:18:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:18:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4720.00 2010-Mar-31 21:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.137 (still bad) 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:18:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:18:41 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:18:41 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:18:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:18:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:18:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:18:41 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:18:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:18:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:18:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:18:41 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:18:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:18:41 LOG5 finish_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:18:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:18:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:18:41 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Mar-31 21:18:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Mar-31 21:18:41 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Mar-31 21:18:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:18:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:18:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:18:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:18:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:18:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:18:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:18:42 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2010-Mar-31 21:18:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:18:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:18:42 INFO2 take_data: Starting WAPP 600-second scan: 9000084 2010-Mar-31 21:18:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:18:42 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Mar-31 21:18:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:18:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:18:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:18:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4723.00 2010-Mar-31 21:18:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.925 and 1.560 2010-Mar-31 21:18:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0012.fits 2010-Mar-31 21:18:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0012.fits} 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:18:44 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Mar-31 21:18:45 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Mar-31 21:19:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.687 < 0.75)! 2010-Mar-31 21:19:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.138 0.984 0.962 2010-Mar-31 21:19:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.687 1.112 1.098 0.960 2010-Mar-31 21:19:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.851 1.123 0.970 2010-Mar-31 21:19:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.883 0.986 1.024 2010-Mar-31 21:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.139 (still bad) 2010-Mar-31 21:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.139 (still bad) 2010-Mar-31 21:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.140 (still bad) 2010-Mar-31 21:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.141 (still bad) 2010-Mar-31 21:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.140 (still bad) 2010-Mar-31 21:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.141 (still bad) 2010-Mar-31 21:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.138 (still bad) 2010-Mar-31 21:19:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.759 and 1.137 2010-Mar-31 21:19:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.75)! 2010-Mar-31 21:19:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.136 0.986 0.967 2010-Mar-31 21:19:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.738 1.113 1.100 0.963 2010-Mar-31 21:19:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.858 1.127 0.972 2010-Mar-31 21:19:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.884 0.988 1.025 2010-Mar-31 21:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.137 (still bad) 2010-Mar-31 21:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.137 (still bad) 2010-Mar-31 21:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.137 (still bad) 2010-Mar-31 21:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.136 (still bad) 2010-Mar-31 21:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.139 (still bad) 2010-Mar-31 21:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.137 (still bad) 2010-Mar-31 21:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.139 (still bad) 2010-Mar-31 21:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.138 (still bad) 2010-Mar-31 21:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.138 (still bad) 2010-Mar-31 21:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.139 (still bad) 2010-Mar-31 21:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.139 (still bad) 2010-Mar-31 21:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.137 (still bad) 2010-Mar-31 21:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.137 (still bad) 2010-Mar-31 21:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.137 (still bad) 2010-Mar-31 21:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.137 (still bad) 2010-Mar-31 21:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.136 (still bad) 2010-Mar-31 21:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.138 (still bad) 2010-Mar-31 21:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.139 (still bad) 2010-Mar-31 21:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.138 (still bad) 2010-Mar-31 21:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.138 (still bad) 2010-Mar-31 21:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.139 (still bad) 2010-Mar-31 21:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.137 (still bad) 2010-Mar-31 21:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.139 (still bad) 2010-Mar-31 21:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.137 (still bad) 2010-Mar-31 21:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.137 (still bad) 2010-Mar-31 21:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.656 and 1.138 (still bad) 2010-Mar-31 21:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.138 (still bad) 2010-Mar-31 21:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.133 (still bad) 2010-Mar-31 21:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.131 (still bad) 2010-Mar-31 21:20:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.648 < 0.75)! 2010-Mar-31 21:20:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.133 0.984 0.964 2010-Mar-31 21:20:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.648 1.114 1.098 0.963 2010-Mar-31 21:20:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.851 1.122 0.967 2010-Mar-31 21:20:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.881 0.983 1.021 2010-Mar-31 21:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.132 (still bad) 2010-Mar-31 21:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.139 (still bad) 2010-Mar-31 21:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.142 (still bad) 2010-Mar-31 21:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.143 (still bad) 2010-Mar-31 21:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.147 (still bad) 2010-Mar-31 21:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.143 (still bad) 2010-Mar-31 21:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.145 (still bad) 2010-Mar-31 21:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.151 (still bad) 2010-Mar-31 21:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.143 (still bad) 2010-Mar-31 21:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.142 (still bad) 2010-Mar-31 21:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.146 (still bad) 2010-Mar-31 21:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.140 (still bad) 2010-Mar-31 21:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.142 (still bad) 2010-Mar-31 21:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.151 (still bad) 2010-Mar-31 21:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.142 (still bad) 2010-Mar-31 21:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.142 (still bad) 2010-Mar-31 21:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.141 (still bad) 2010-Mar-31 21:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.141 (still bad) 2010-Mar-31 21:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.142 (still bad) 2010-Mar-31 21:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.151 (still bad) 2010-Mar-31 21:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.141 (still bad) 2010-Mar-31 21:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.138 (still bad) 2010-Mar-31 21:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.140 (still bad) 2010-Mar-31 21:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.136 (still bad) 2010-Mar-31 21:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.139 (still bad) 2010-Mar-31 21:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.709 and 1.148 (still bad) 2010-Mar-31 21:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.137 (still bad) 2010-Mar-31 21:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.137 (still bad) 2010-Mar-31 21:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.140 (still bad) 2010-Mar-31 21:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.136 (still bad) 2010-Mar-31 21:21:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.670 < 0.75)! 2010-Mar-31 21:21:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.140 0.986 0.963 2010-Mar-31 21:21:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.670 1.114 1.096 0.961 2010-Mar-31 21:21:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.854 1.130 0.973 2010-Mar-31 21:21:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.895 0.997 1.036 2010-Mar-31 21:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.146 (still bad) 2010-Mar-31 21:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.139 (still bad) 2010-Mar-31 21:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.138 (still bad) 2010-Mar-31 21:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.140 (still bad) 2010-Mar-31 21:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.136 (still bad) 2010-Mar-31 21:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.140 (still bad) 2010-Mar-31 21:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.148 (still bad) 2010-Mar-31 21:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.139 (still bad) 2010-Mar-31 21:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.139 (still bad) 2010-Mar-31 21:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.141 (still bad) 2010-Mar-31 21:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.139 (still bad) 2010-Mar-31 21:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.139 (still bad) 2010-Mar-31 21:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.147 (still bad) 2010-Mar-31 21:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.138 (still bad) 2010-Mar-31 21:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.138 (still bad) 2010-Mar-31 21:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.139 (still bad) 2010-Mar-31 21:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.137 (still bad) 2010-Mar-31 21:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.634 and 1.140 (still bad) 2010-Mar-31 21:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.148 (still bad) 2010-Mar-31 21:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.139 (still bad) 2010-Mar-31 21:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.138 (still bad) 2010-Mar-31 21:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.140 (still bad) 2010-Mar-31 21:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.138 (still bad) 2010-Mar-31 21:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.139 (still bad) 2010-Mar-31 21:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.141 (still bad) 2010-Mar-31 21:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.141 (still bad) 2010-Mar-31 21:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.140 (still bad) 2010-Mar-31 21:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.140 (still bad) 2010-Mar-31 21:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.140 (still bad) 2010-Mar-31 21:22:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.695 < 0.75)! 2010-Mar-31 21:22:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.142 0.989 0.967 2010-Mar-31 21:22:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.695 1.115 1.102 0.964 2010-Mar-31 21:22:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.855 1.128 0.973 2010-Mar-31 21:22:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.887 0.989 1.028 2010-Mar-31 21:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.138 (still bad) 2010-Mar-31 21:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.138 (still bad) 2010-Mar-31 21:22:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.784 and 1.140 2010-Mar-31 21:22:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.718 < 0.75)! 2010-Mar-31 21:22:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.145 0.988 0.966 2010-Mar-31 21:22:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.718 1.115 1.107 0.969 2010-Mar-31 21:22:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.854 1.127 0.974 2010-Mar-31 21:22:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.882 0.989 1.023 2010-Mar-31 21:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.141 (still bad) 2010-Mar-31 21:22:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.761 and 1.142 2010-Mar-31 21:24:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 21:24:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.141 0.987 0.966 2010-Mar-31 21:24:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.116 1.100 0.963 2010-Mar-31 21:24:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.855 1.130 0.977 2010-Mar-31 21:24:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.886 0.988 1.028 2010-Mar-31 21:24:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.137 2010-Mar-31 21:27:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 21:27:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.139 0.988 0.966 2010-Mar-31 21:27:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.115 1.100 0.963 2010-Mar-31 21:27:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.856 1.130 0.974 2010-Mar-31 21:27:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.886 0.988 1.028 2010-Mar-31 21:27:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.761 and 1.142 2010-Mar-31 21:27:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:27:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.140 0.987 0.965 2010-Mar-31 21:27:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.115 1.101 0.964 2010-Mar-31 21:27:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.857 1.127 0.974 2010-Mar-31 21:27:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.886 0.988 1.029 2010-Mar-31 21:27:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.140 2010-Mar-31 21:28:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:28:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:28:43 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Mar-31 21:28:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:28:43 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2010-Mar-31 21:28:43 LOG1 fixed_driftmap: New position: year = 2010.2488567888558 RA = 10:05:37.7 RA/Dec = 10:06:13.6 +19:17:34.0 2010-Mar-31 21:28:43 NOTE fixed_driftmap: Correcting ZA to 6:30:42.3 ... 2010-Mar-31 21:28:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5117544551 -CF 2010-Mar-31 21:28:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:28:43 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:28:43 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Mar-31 21:28:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:28:43 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:28:43 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Mar-31 21:28:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:28:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:28:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:28:43 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:28:43 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5117544551 -CF 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:28:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:28:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:28:43 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:28:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:28:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:28:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:28:44 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:28:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:28:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:28:44 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:28:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:28:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:28:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:28:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:28:44 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:28:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:28:44 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:28:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:28:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:28:44 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:28:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:28:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:28:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:28:44 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:28:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:28:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:28:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:28:44 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:28:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:28:44 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:28:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:28:44 INFO2 take_data: Starting WAPP 1-second scan: 9000085 2010-Mar-31 21:28:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:28:44 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Mar-31 21:28:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:28:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:28:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5325.00 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:28:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:28:46 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:28:46 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:28:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:28:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:28:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:28:46 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:28:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:28:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:28:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:28:46 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:28:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:28:46 LOG5 finish_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:28:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:28:46 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Mar-31 21:28:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Mar-31 21:28:46 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Mar-31 21:28:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:28:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:28:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:28:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:28:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:28:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:28:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:28:47 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Mar-31 21:28:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:28:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:28:47 INFO2 take_data: Starting WAPP 600-second scan: 9000086 2010-Mar-31 21:28:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:28:47 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Mar-31 21:28:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:28:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:28:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:28:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5328.00 2010-Mar-31 21:28:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0013.fits 2010-Mar-31 21:28:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0013.fits} 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:28:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.741 < 0.75)! 2010-Mar-31 21:28:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.140 0.988 0.967 2010-Mar-31 21:28:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.741 1.117 1.101 0.965 2010-Mar-31 21:28:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.857 1.130 0.974 2010-Mar-31 21:28:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.888 0.991 1.029 2010-Mar-31 21:28:59 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.145 2010-Mar-31 21:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.714 < 0.75)! 2010-Mar-31 21:29:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.145 0.989 0.970 2010-Mar-31 21:29:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.714 1.118 1.101 0.966 2010-Mar-31 21:29:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.859 1.132 0.976 2010-Mar-31 21:29:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.889 0.993 1.030 2010-Mar-31 21:29:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.759 and 1.145 2010-Mar-31 21:29:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.75)! 2010-Mar-31 21:29:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.143 0.989 0.968 2010-Mar-31 21:29:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.721 1.118 1.101 0.965 2010-Mar-31 21:29:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.857 1.129 0.976 2010-Mar-31 21:29:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.888 0.992 1.030 2010-Mar-31 21:30:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.787 and 1.150 2010-Mar-31 21:30:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2010-Mar-31 21:30:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.143 0.988 0.967 2010-Mar-31 21:30:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.735 1.117 1.101 0.964 2010-Mar-31 21:30:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.856 1.128 0.975 2010-Mar-31 21:30:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.886 0.990 1.028 2010-Mar-31 21:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.141 (still bad) 2010-Mar-31 21:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.145 (still bad) 2010-Mar-31 21:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.144 (still bad) 2010-Mar-31 21:30:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.791 and 1.144 2010-Mar-31 21:30:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:30:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.146 0.989 0.969 2010-Mar-31 21:30:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.121 1.101 0.966 2010-Mar-31 21:30:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.858 1.129 0.974 2010-Mar-31 21:30:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.886 0.989 1.028 2010-Mar-31 21:30:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.756 and 1.147 2010-Mar-31 21:30:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.747 < 0.75)! 2010-Mar-31 21:30:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.152 0.990 0.971 2010-Mar-31 21:30:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.747 1.120 1.103 0.967 2010-Mar-31 21:30:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.857 1.128 0.974 2010-Mar-31 21:30:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.884 0.989 1.025 2010-Mar-31 21:30:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.762 and 1.148 2010-Mar-31 21:30:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.75)! 2010-Mar-31 21:30:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.160 0.995 0.974 2010-Mar-31 21:30:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.746 1.125 1.106 0.969 2010-Mar-31 21:30:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.859 1.129 0.974 2010-Mar-31 21:30:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.886 0.989 1.026 2010-Mar-31 21:30:38 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.154 2010-Mar-31 21:30:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.75)! 2010-Mar-31 21:30:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.151 0.990 0.970 2010-Mar-31 21:30:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.743 1.118 1.101 0.965 2010-Mar-31 21:30:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.860 1.133 0.977 2010-Mar-31 21:30:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.889 0.991 1.031 2010-Mar-31 21:30:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.754 and 1.148 2010-Mar-31 21:30:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.725 < 0.75)! 2010-Mar-31 21:30:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.145 0.990 0.968 2010-Mar-31 21:30:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.725 1.118 1.101 0.965 2010-Mar-31 21:30:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.857 1.130 0.976 2010-Mar-31 21:30:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.886 0.989 1.027 2010-Mar-31 21:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.145 (still bad) 2010-Mar-31 21:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.144 (still bad) 2010-Mar-31 21:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.143 (still bad) 2010-Mar-31 21:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.146 (still bad) 2010-Mar-31 21:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.145 (still bad) 2010-Mar-31 21:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.144 (still bad) 2010-Mar-31 21:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.145 (still bad) 2010-Mar-31 21:31:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.767 and 1.143 2010-Mar-31 21:31:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.702 < 0.75)! 2010-Mar-31 21:31:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.142 0.989 0.969 2010-Mar-31 21:31:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.702 1.118 1.102 0.965 2010-Mar-31 21:31:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.857 1.130 0.975 2010-Mar-31 21:31:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.886 0.990 1.027 2010-Mar-31 21:31:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.771 and 1.147 2010-Mar-31 21:31:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.687 < 0.75)! 2010-Mar-31 21:31:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.141 0.990 0.969 2010-Mar-31 21:31:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.687 1.117 1.102 0.967 2010-Mar-31 21:31:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.857 1.133 0.977 2010-Mar-31 21:31:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.888 0.992 1.030 2010-Mar-31 21:31:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.751 and 1.140 2010-Mar-31 21:31:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:31:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.143 0.990 0.971 2010-Mar-31 21:31:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.118 1.105 0.969 2010-Mar-31 21:31:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.860 1.131 0.976 2010-Mar-31 21:31:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.890 0.993 1.033 2010-Mar-31 21:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.141 (still bad) 2010-Mar-31 21:31:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.773 and 1.143 2010-Mar-31 21:32:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.746 < 0.75)! 2010-Mar-31 21:32:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.144 0.990 0.968 2010-Mar-31 21:32:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.746 1.116 1.101 0.964 2010-Mar-31 21:32:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.859 1.130 0.976 2010-Mar-31 21:32:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.887 0.989 1.029 2010-Mar-31 21:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.148 (still bad) 2010-Mar-31 21:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.706 and 1.142 (still bad) 2010-Mar-31 21:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.139 (still bad) 2010-Mar-31 21:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.145 (still bad) 2010-Mar-31 21:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.142 (still bad) 2010-Mar-31 21:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.142 (still bad) 2010-Mar-31 21:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.149 (still bad) 2010-Mar-31 21:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.141 (still bad) 2010-Mar-31 21:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.141 (still bad) 2010-Mar-31 21:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.143 (still bad) 2010-Mar-31 21:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.142 (still bad) 2010-Mar-31 21:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.143 (still bad) 2010-Mar-31 21:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.148 (still bad) 2010-Mar-31 21:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.140 (still bad) 2010-Mar-31 21:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.140 (still bad) 2010-Mar-31 21:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.141 (still bad) 2010-Mar-31 21:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.138 (still bad) 2010-Mar-31 21:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.603 and 1.143 (still bad) 2010-Mar-31 21:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.147 (still bad) 2010-Mar-31 21:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.140 (still bad) 2010-Mar-31 21:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.141 (still bad) 2010-Mar-31 21:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.144 (still bad) 2010-Mar-31 21:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.141 (still bad) 2010-Mar-31 21:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.144 (still bad) 2010-Mar-31 21:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.148 (still bad) 2010-Mar-31 21:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.141 (still bad) 2010-Mar-31 21:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.140 (still bad) 2010-Mar-31 21:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.140 (still bad) 2010-Mar-31 21:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.140 (still bad) 2010-Mar-31 21:33:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Mar-31 21:33:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.142 0.990 0.968 2010-Mar-31 21:33:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.122 1.102 0.966 2010-Mar-31 21:33:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.856 1.130 0.974 2010-Mar-31 21:33:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.888 0.990 1.028 2010-Mar-31 21:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.146 (still bad) 2010-Mar-31 21:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.143 (still bad) 2010-Mar-31 21:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.143 (still bad) 2010-Mar-31 21:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.146 (still bad) 2010-Mar-31 21:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.142 (still bad) 2010-Mar-31 21:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.141 (still bad) 2010-Mar-31 21:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.149 (still bad) 2010-Mar-31 21:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.143 (still bad) 2010-Mar-31 21:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.142 (still bad) 2010-Mar-31 21:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.146 (still bad) 2010-Mar-31 21:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.142 (still bad) 2010-Mar-31 21:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.142 (still bad) 2010-Mar-31 21:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.149 (still bad) 2010-Mar-31 21:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.141 (still bad) 2010-Mar-31 21:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.141 (still bad) 2010-Mar-31 21:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.143 (still bad) 2010-Mar-31 21:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.142 (still bad) 2010-Mar-31 21:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.149 (still bad) 2010-Mar-31 21:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.150 (still bad) 2010-Mar-31 21:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.153 (still bad) 2010-Mar-31 21:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.156 (still bad) 2010-Mar-31 21:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.605 and 1.156 (still bad) 2010-Mar-31 21:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.158 (still bad) 2010-Mar-31 21:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.162 (still bad) 2010-Mar-31 21:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.156 (still bad) 2010-Mar-31 21:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.148 (still bad) 2010-Mar-31 21:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.146 (still bad) 2010-Mar-31 21:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.144 (still bad) 2010-Mar-31 21:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.143 (still bad) 2010-Mar-31 21:34:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 21:34:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.148 0.996 0.974 2010-Mar-31 21:34:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.124 1.106 0.972 2010-Mar-31 21:34:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.860 1.132 0.976 2010-Mar-31 21:34:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.894 0.998 1.037 2010-Mar-31 21:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.143 (still bad) 2010-Mar-31 21:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.141 (still bad) 2010-Mar-31 21:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.142 (still bad) 2010-Mar-31 21:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.141 (still bad) 2010-Mar-31 21:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.142 (still bad) 2010-Mar-31 21:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 21:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.141 (still bad) 2010-Mar-31 21:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.139 (still bad) 2010-Mar-31 21:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.144 (still bad) 2010-Mar-31 21:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.140 (still bad) 2010-Mar-31 21:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.143 (still bad) 2010-Mar-31 21:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.147 (still bad) 2010-Mar-31 21:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.142 (still bad) 2010-Mar-31 21:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.141 (still bad) 2010-Mar-31 21:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.147 (still bad) 2010-Mar-31 21:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.144 (still bad) 2010-Mar-31 21:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.148 (still bad) 2010-Mar-31 21:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.156 (still bad) 2010-Mar-31 21:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.148 (still bad) 2010-Mar-31 21:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 21:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.149 (still bad) 2010-Mar-31 21:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.146 (still bad) 2010-Mar-31 21:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.146 (still bad) 2010-Mar-31 21:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.152 (still bad) 2010-Mar-31 21:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.144 (still bad) 2010-Mar-31 21:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.143 (still bad) 2010-Mar-31 21:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.142 (still bad) 2010-Mar-31 21:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.143 (still bad) 2010-Mar-31 21:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.144 (still bad) 2010-Mar-31 21:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.148 (still bad) 2010-Mar-31 21:35:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 21:35:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.143 0.989 0.968 2010-Mar-31 21:35:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.118 1.104 0.968 2010-Mar-31 21:35:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.859 1.130 0.976 2010-Mar-31 21:35:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.888 0.989 1.028 2010-Mar-31 21:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 21:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.143 (still bad) 2010-Mar-31 21:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.142 (still bad) 2010-Mar-31 21:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.143 (still bad) 2010-Mar-31 21:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.150 (still bad) 2010-Mar-31 21:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.144 (still bad) 2010-Mar-31 21:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.141 (still bad) 2010-Mar-31 21:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.143 (still bad) 2010-Mar-31 21:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.142 (still bad) 2010-Mar-31 21:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.141 (still bad) 2010-Mar-31 21:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.140 (still bad) 2010-Mar-31 21:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.145 (still bad) 2010-Mar-31 21:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 21:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.147 (still bad) 2010-Mar-31 21:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.153 (still bad) 2010-Mar-31 21:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.149 (still bad) 2010-Mar-31 21:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.147 (still bad) 2010-Mar-31 21:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.150 (still bad) 2010-Mar-31 21:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.150 (still bad) 2010-Mar-31 21:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.148 (still bad) 2010-Mar-31 21:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.150 (still bad) 2010-Mar-31 21:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.148 (still bad) 2010-Mar-31 21:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.632 and 1.146 (still bad) 2010-Mar-31 21:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.147 (still bad) 2010-Mar-31 21:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.144 (still bad) 2010-Mar-31 21:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.144 (still bad) 2010-Mar-31 21:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.148 (still bad) 2010-Mar-31 21:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.147 (still bad) 2010-Mar-31 21:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.668 and 1.145 (still bad) 2010-Mar-31 21:36:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.75)! 2010-Mar-31 21:36:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.146 0.992 0.971 2010-Mar-31 21:36:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.708 1.120 1.102 0.968 2010-Mar-31 21:36:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.859 1.133 0.976 2010-Mar-31 21:36:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.888 0.991 1.029 2010-Mar-31 21:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.144 (still bad) 2010-Mar-31 21:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.144 (still bad) 2010-Mar-31 21:36:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.763 and 1.147 2010-Mar-31 21:36:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.725 < 0.75)! 2010-Mar-31 21:36:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.147 0.992 0.970 2010-Mar-31 21:36:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.725 1.122 1.102 0.966 2010-Mar-31 21:36:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.863 1.140 0.981 2010-Mar-31 21:36:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.887 0.991 1.029 2010-Mar-31 21:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.147 (still bad) 2010-Mar-31 21:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.147 (still bad) 2010-Mar-31 21:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.142 (still bad) 2010-Mar-31 21:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.145 (still bad) 2010-Mar-31 21:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.146 (still bad) 2010-Mar-31 21:37:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.147 2010-Mar-31 21:37:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2010-Mar-31 21:37:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.146 0.991 0.969 2010-Mar-31 21:37:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.735 1.118 1.100 0.965 2010-Mar-31 21:37:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.858 1.130 0.976 2010-Mar-31 21:37:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.886 0.989 1.027 2010-Mar-31 21:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.147 (still bad) 2010-Mar-31 21:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.145 (still bad) 2010-Mar-31 21:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.141 (still bad) 2010-Mar-31 21:37:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.750 and 1.147 2010-Mar-31 21:37:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:37:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.144 0.997 0.974 2010-Mar-31 21:37:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.120 1.102 0.967 2010-Mar-31 21:37:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.858 1.131 0.975 2010-Mar-31 21:37:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.886 0.989 1.028 2010-Mar-31 21:37:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.800 and 1.144 2010-Mar-31 21:37:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.741 < 0.75)! 2010-Mar-31 21:37:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.146 0.991 0.969 2010-Mar-31 21:37:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.741 1.117 1.102 0.967 2010-Mar-31 21:37:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.859 1.132 0.975 2010-Mar-31 21:37:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.890 0.990 1.032 2010-Mar-31 21:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.143 (still bad) 2010-Mar-31 21:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.145 (still bad) 2010-Mar-31 21:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.145 (still bad) 2010-Mar-31 21:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.146 (still bad) 2010-Mar-31 21:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.152 (still bad) 2010-Mar-31 21:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.145 (still bad) 2010-Mar-31 21:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.142 (still bad) 2010-Mar-31 21:37:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.825 and 1.147 2010-Mar-31 21:38:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.75)! 2010-Mar-31 21:38:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.145 0.989 0.967 2010-Mar-31 21:38:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 1.117 1.102 0.966 2010-Mar-31 21:38:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.858 1.129 0.976 2010-Mar-31 21:38:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.887 0.989 1.029 2010-Mar-31 21:38:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.754 and 1.146 2010-Mar-31 21:38:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:38:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:38:48 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:38:48 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG1 fixed_driftmap: New position: year = 2010.248875960149 RA = 10:15:41.7 RA/Dec = 10:16:17.5 +19:17:29.4 2010-Mar-31 21:38:48 NOTE fixed_driftmap: Correcting ZA to 6:30:05.5 ... 2010-Mar-31 21:38:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5015416466 -CF 2010-Mar-31 21:38:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:38:48 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:38:48 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:38:48 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:38:48 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:38:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:38:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:38:48 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:38:48 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5015416466 -CF 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:38:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:38:48 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:38:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:38:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:38:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:38:48 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Mar-31 21:38:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:38:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:38:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:38:49 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:38:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:38:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:38:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:38:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:38:49 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:38:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:38:49 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:38:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:38:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:38:49 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:38:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:38:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:38:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:38:49 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:38:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:38:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:38:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:38:49 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:38:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:38:49 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:38:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:38:49 INFO2 take_data: Starting WAPP 1-second scan: 9000087 2010-Mar-31 21:38:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:38:49 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Mar-31 21:38:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:38:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:38:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5930.00 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:38:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:38:51 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:38:51 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:38:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:38:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:38:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:38:51 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:38:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:38:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:38:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:38:51 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:38:51 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:38:51 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:38:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:38:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:38:51 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Mar-31 21:38:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Mar-31 21:38:51 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Mar-31 21:38:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:38:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:38:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:38:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:38:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:38:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:38:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:38:52 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2010-Mar-31 21:38:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:38:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:38:52 INFO2 take_data: Starting WAPP 600-second scan: 9000088 2010-Mar-31 21:38:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:38:52 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Mar-31 21:38:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:38:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:38:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:38:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5933.00 2010-Mar-31 21:38:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0014.fits 2010-Mar-31 21:38:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0014.fits} 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:39:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.749 < 0.75)! 2010-Mar-31 21:39:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.153 0.997 0.977 2010-Mar-31 21:39:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.749 1.124 1.107 0.972 2010-Mar-31 21:39:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.863 1.133 0.977 2010-Mar-31 21:39:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.888 0.991 1.031 2010-Mar-31 21:39:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.754 and 1.147 2010-Mar-31 21:39:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.75)! 2010-Mar-31 21:39:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.145 0.988 0.970 2010-Mar-31 21:39:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.744 1.118 1.100 0.965 2010-Mar-31 21:39:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.859 1.133 0.977 2010-Mar-31 21:39:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.887 0.989 1.028 2010-Mar-31 21:39:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.147 2010-Mar-31 21:39:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Mar-31 21:39:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.144 0.992 0.970 2010-Mar-31 21:39:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.729 1.117 1.102 0.965 2010-Mar-31 21:39:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.859 1.138 0.981 2010-Mar-31 21:39:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.888 0.991 1.030 2010-Mar-31 21:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.144 (still bad) 2010-Mar-31 21:39:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.148 2010-Mar-31 21:39:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.75)! 2010-Mar-31 21:39:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.144 0.993 0.972 2010-Mar-31 21:39:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.736 1.119 1.100 0.965 2010-Mar-31 21:39:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.860 1.135 0.980 2010-Mar-31 21:39:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.888 0.990 1.030 2010-Mar-31 21:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.145 (still bad) 2010-Mar-31 21:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.152 (still bad) 2010-Mar-31 21:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.146 (still bad) 2010-Mar-31 21:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.147 (still bad) 2010-Mar-31 21:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.149 (still bad) 2010-Mar-31 21:39:33 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.772 and 1.147 2010-Mar-31 21:39:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.737 < 0.75)! 2010-Mar-31 21:39:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.153 0.997 0.975 2010-Mar-31 21:39:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.737 1.124 1.105 0.970 2010-Mar-31 21:39:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.863 1.137 0.983 2010-Mar-31 21:39:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.892 0.996 1.034 2010-Mar-31 21:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.146 (still bad) 2010-Mar-31 21:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.145 (still bad) 2010-Mar-31 21:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.148 (still bad) 2010-Mar-31 21:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.144 (still bad) 2010-Mar-31 21:39:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.805 and 1.146 2010-Mar-31 21:39:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.75)! 2010-Mar-31 21:39:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.145 0.991 0.970 2010-Mar-31 21:39:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.748 1.118 1.103 0.967 2010-Mar-31 21:39:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.859 1.132 0.977 2010-Mar-31 21:39:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.887 0.991 1.030 2010-Mar-31 21:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.145 (still bad) 2010-Mar-31 21:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.147 (still bad) 2010-Mar-31 21:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.145 (still bad) 2010-Mar-31 21:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.144 (still bad) 2010-Mar-31 21:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.152 (still bad) 2010-Mar-31 21:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.146 (still bad) 2010-Mar-31 21:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.147 (still bad) 2010-Mar-31 21:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.150 (still bad) 2010-Mar-31 21:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.146 (still bad) 2010-Mar-31 21:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.148 (still bad) 2010-Mar-31 21:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.154 (still bad) 2010-Mar-31 21:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.146 (still bad) 2010-Mar-31 21:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.146 (still bad) 2010-Mar-31 21:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.147 (still bad) 2010-Mar-31 21:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.145 (still bad) 2010-Mar-31 21:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.148 (still bad) 2010-Mar-31 21:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.155 (still bad) 2010-Mar-31 21:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.145 (still bad) 2010-Mar-31 21:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.144 (still bad) 2010-Mar-31 21:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.147 (still bad) 2010-Mar-31 21:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.143 (still bad) 2010-Mar-31 21:40:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.796 and 1.143 2010-Mar-31 21:40:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Mar-31 21:40:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.154 0.997 0.974 2010-Mar-31 21:40:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.729 1.128 1.109 0.973 2010-Mar-31 21:40:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.860 1.134 0.979 2010-Mar-31 21:40:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.889 0.992 1.032 2010-Mar-31 21:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.146 (still bad) 2010-Mar-31 21:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.144 (still bad) 2010-Mar-31 21:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.147 (still bad) 2010-Mar-31 21:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.145 (still bad) 2010-Mar-31 21:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.147 (still bad) 2010-Mar-31 21:40:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.788 and 1.149 2010-Mar-31 21:40:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.75)! 2010-Mar-31 21:40:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.148 0.991 0.970 2010-Mar-31 21:40:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.726 1.126 1.101 0.967 2010-Mar-31 21:40:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.860 1.134 0.978 2010-Mar-31 21:40:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.888 0.989 1.030 2010-Mar-31 21:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.147 (still bad) 2010-Mar-31 21:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.147 (still bad) 2010-Mar-31 21:41:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.153 2010-Mar-31 21:41:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.708 < 0.75)! 2010-Mar-31 21:41:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.145 0.992 0.972 2010-Mar-31 21:41:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.708 1.125 1.104 0.967 2010-Mar-31 21:41:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.862 1.130 0.977 2010-Mar-31 21:41:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.888 0.991 1.031 2010-Mar-31 21:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.146 (still bad) 2010-Mar-31 21:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.150 (still bad) 2010-Mar-31 21:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.152 (still bad) 2010-Mar-31 21:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.153 (still bad) 2010-Mar-31 21:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.162 (still bad) 2010-Mar-31 21:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.159 (still bad) 2010-Mar-31 21:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.158 (still bad) 2010-Mar-31 21:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.159 (still bad) 2010-Mar-31 21:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.154 (still bad) 2010-Mar-31 21:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.156 (still bad) 2010-Mar-31 21:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.162 (still bad) 2010-Mar-31 21:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.152 (still bad) 2010-Mar-31 21:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.147 (still bad) 2010-Mar-31 21:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.745 and 1.149 (still bad) 2010-Mar-31 21:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.144 (still bad) 2010-Mar-31 21:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.145 (still bad) 2010-Mar-31 21:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.151 (still bad) 2010-Mar-31 21:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.144 (still bad) 2010-Mar-31 21:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.144 (still bad) 2010-Mar-31 21:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.146 (still bad) 2010-Mar-31 21:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.145 (still bad) 2010-Mar-31 21:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.143 (still bad) 2010-Mar-31 21:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.150 (still bad) 2010-Mar-31 21:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.148 (still bad) 2010-Mar-31 21:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.145 (still bad) 2010-Mar-31 21:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.144 (still bad) 2010-Mar-31 21:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.148 (still bad) 2010-Mar-31 21:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.144 (still bad) 2010-Mar-31 21:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.149 (still bad) 2010-Mar-31 21:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.147 (still bad) 2010-Mar-31 21:42:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.653 < 0.75)! 2010-Mar-31 21:42:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.145 0.990 0.970 2010-Mar-31 21:42:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.653 1.118 1.101 0.967 2010-Mar-31 21:42:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.857 1.133 0.976 2010-Mar-31 21:42:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.885 0.991 1.027 2010-Mar-31 21:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.148 (still bad) 2010-Mar-31 21:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.147 (still bad) 2010-Mar-31 21:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.146 (still bad) 2010-Mar-31 21:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.151 (still bad) 2010-Mar-31 21:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.147 (still bad) 2010-Mar-31 21:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.147 (still bad) 2010-Mar-31 21:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.147 (still bad) 2010-Mar-31 21:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.147 (still bad) 2010-Mar-31 21:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.145 (still bad) 2010-Mar-31 21:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.148 (still bad) 2010-Mar-31 21:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.147 (still bad) 2010-Mar-31 21:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.143 (still bad) 2010-Mar-31 21:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.147 (still bad) 2010-Mar-31 21:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.145 (still bad) 2010-Mar-31 21:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.146 (still bad) 2010-Mar-31 21:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.153 (still bad) 2010-Mar-31 21:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.148 (still bad) 2010-Mar-31 21:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.146 (still bad) 2010-Mar-31 21:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.147 (still bad) 2010-Mar-31 21:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.144 (still bad) 2010-Mar-31 21:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.148 (still bad) 2010-Mar-31 21:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.153 (still bad) 2010-Mar-31 21:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.145 (still bad) 2010-Mar-31 21:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.144 (still bad) 2010-Mar-31 21:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.146 (still bad) 2010-Mar-31 21:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.145 (still bad) 2010-Mar-31 21:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.147 (still bad) 2010-Mar-31 21:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.153 (still bad) 2010-Mar-31 21:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.145 (still bad) 2010-Mar-31 21:43:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.688 < 0.75)! 2010-Mar-31 21:43:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.144 0.989 0.967 2010-Mar-31 21:43:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.688 1.118 1.100 0.966 2010-Mar-31 21:43:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.859 1.130 0.975 2010-Mar-31 21:43:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.885 0.991 1.027 2010-Mar-31 21:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.148 (still bad) 2010-Mar-31 21:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.144 (still bad) 2010-Mar-31 21:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.147 (still bad) 2010-Mar-31 21:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.154 (still bad) 2010-Mar-31 21:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.147 (still bad) 2010-Mar-31 21:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.149 (still bad) 2010-Mar-31 21:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.149 (still bad) 2010-Mar-31 21:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.145 (still bad) 2010-Mar-31 21:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.147 (still bad) 2010-Mar-31 21:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.642 and 1.153 (still bad) 2010-Mar-31 21:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.146 (still bad) 2010-Mar-31 21:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.144 (still bad) 2010-Mar-31 21:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.146 (still bad) 2010-Mar-31 21:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.144 (still bad) 2010-Mar-31 21:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.147 (still bad) 2010-Mar-31 21:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.151 (still bad) 2010-Mar-31 21:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.145 (still bad) 2010-Mar-31 21:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.726 and 1.145 (still bad) 2010-Mar-31 21:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.145 (still bad) 2010-Mar-31 21:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.144 (still bad) 2010-Mar-31 21:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.144 (still bad) 2010-Mar-31 21:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.152 (still bad) 2010-Mar-31 21:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.147 (still bad) 2010-Mar-31 21:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.146 (still bad) 2010-Mar-31 21:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.144 (still bad) 2010-Mar-31 21:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.142 (still bad) 2010-Mar-31 21:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.143 (still bad) 2010-Mar-31 21:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.152 (still bad) 2010-Mar-31 21:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.146 (still bad) 2010-Mar-31 21:44:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.586 < 0.75)! 2010-Mar-31 21:44:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.144 0.991 0.969 2010-Mar-31 21:44:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.586 1.120 1.100 0.966 2010-Mar-31 21:44:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.857 1.131 0.975 2010-Mar-31 21:44:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.887 0.991 1.028 2010-Mar-31 21:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.144 (still bad) 2010-Mar-31 21:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.144 (still bad) 2010-Mar-31 21:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.144 (still bad) 2010-Mar-31 21:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.144 (still bad) 2010-Mar-31 21:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.144 (still bad) 2010-Mar-31 21:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.142 (still bad) 2010-Mar-31 21:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.145 (still bad) 2010-Mar-31 21:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.143 (still bad) 2010-Mar-31 21:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.143 (still bad) 2010-Mar-31 21:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.145 (still bad) 2010-Mar-31 21:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.145 (still bad) 2010-Mar-31 21:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.143 (still bad) 2010-Mar-31 21:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.145 (still bad) 2010-Mar-31 21:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.144 (still bad) 2010-Mar-31 21:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.144 (still bad) 2010-Mar-31 21:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 21:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.143 (still bad) 2010-Mar-31 21:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 21:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.143 (still bad) 2010-Mar-31 21:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.144 (still bad) 2010-Mar-31 21:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.146 (still bad) 2010-Mar-31 21:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.149 (still bad) 2010-Mar-31 21:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.145 (still bad) 2010-Mar-31 21:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.146 (still bad) 2010-Mar-31 21:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.146 (still bad) 2010-Mar-31 21:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.147 (still bad) 2010-Mar-31 21:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.146 (still bad) 2010-Mar-31 21:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.150 (still bad) 2010-Mar-31 21:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.145 (still bad) 2010-Mar-31 21:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.145 (still bad) 2010-Mar-31 21:45:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.470 < 0.75)! 2010-Mar-31 21:45:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.147 0.990 0.968 2010-Mar-31 21:45:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.470 1.123 1.103 0.970 2010-Mar-31 21:45:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.860 1.131 0.977 2010-Mar-31 21:45:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.887 0.991 1.031 2010-Mar-31 21:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.143 (still bad) 2010-Mar-31 21:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.144 (still bad) 2010-Mar-31 21:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.149 (still bad) 2010-Mar-31 21:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.145 (still bad) 2010-Mar-31 21:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.144 (still bad) 2010-Mar-31 21:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.146 (still bad) 2010-Mar-31 21:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.146 (still bad) 2010-Mar-31 21:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.145 (still bad) 2010-Mar-31 21:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.150 (still bad) 2010-Mar-31 21:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.145 (still bad) 2010-Mar-31 21:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.142 (still bad) 2010-Mar-31 21:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 21:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 21:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.143 (still bad) 2010-Mar-31 21:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.147 (still bad) 2010-Mar-31 21:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.144 (still bad) 2010-Mar-31 21:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.143 (still bad) 2010-Mar-31 21:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.143 (still bad) 2010-Mar-31 21:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.145 (still bad) 2010-Mar-31 21:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.147 (still bad) 2010-Mar-31 21:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.147 (still bad) 2010-Mar-31 21:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.592 and 1.143 (still bad) 2010-Mar-31 21:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.144 (still bad) 2010-Mar-31 21:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.140 (still bad) 2010-Mar-31 21:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.144 (still bad) 2010-Mar-31 21:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.148 (still bad) 2010-Mar-31 21:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 21:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.144 (still bad) 2010-Mar-31 21:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.145 (still bad) 2010-Mar-31 21:46:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.548 < 0.75)! 2010-Mar-31 21:46:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.143 0.987 0.967 2010-Mar-31 21:46:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.548 1.114 1.102 0.966 2010-Mar-31 21:46:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.858 1.128 0.976 2010-Mar-31 21:46:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.886 0.990 1.027 2010-Mar-31 21:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.145 (still bad) 2010-Mar-31 21:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.149 (still bad) 2010-Mar-31 21:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.147 (still bad) 2010-Mar-31 21:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.142 (still bad) 2010-Mar-31 21:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.145 (still bad) 2010-Mar-31 21:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.143 (still bad) 2010-Mar-31 21:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.143 (still bad) 2010-Mar-31 21:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 21:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 21:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.142 (still bad) 2010-Mar-31 21:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.144 (still bad) 2010-Mar-31 21:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.143 (still bad) 2010-Mar-31 21:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.144 (still bad) 2010-Mar-31 21:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 21:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.145 (still bad) 2010-Mar-31 21:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.144 (still bad) 2010-Mar-31 21:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.146 (still bad) 2010-Mar-31 21:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.143 (still bad) 2010-Mar-31 21:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.144 (still bad) 2010-Mar-31 21:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.148 (still bad) 2010-Mar-31 21:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 21:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.143 (still bad) 2010-Mar-31 21:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 21:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.143 (still bad) 2010-Mar-31 21:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.148 (still bad) 2010-Mar-31 21:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.144 (still bad) 2010-Mar-31 21:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.143 (still bad) 2010-Mar-31 21:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.145 (still bad) 2010-Mar-31 21:47:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 21:47:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.142 0.990 0.969 2010-Mar-31 21:47:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.119 1.105 0.970 2010-Mar-31 21:47:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.860 1.128 0.976 2010-Mar-31 21:47:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.888 0.990 1.029 2010-Mar-31 21:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.142 (still bad) 2010-Mar-31 21:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.148 (still bad) 2010-Mar-31 21:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.142 (still bad) 2010-Mar-31 21:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.145 (still bad) 2010-Mar-31 21:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.143 (still bad) 2010-Mar-31 21:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.143 (still bad) 2010-Mar-31 21:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 21:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.145 (still bad) 2010-Mar-31 21:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.584 and 1.143 (still bad) 2010-Mar-31 21:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.143 (still bad) 2010-Mar-31 21:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.142 (still bad) 2010-Mar-31 21:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.577 and 1.143 (still bad) 2010-Mar-31 21:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.147 (still bad) 2010-Mar-31 21:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.141 (still bad) 2010-Mar-31 21:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.141 (still bad) 2010-Mar-31 21:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.144 (still bad) 2010-Mar-31 21:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.144 (still bad) 2010-Mar-31 21:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.145 (still bad) 2010-Mar-31 21:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.145 (still bad) 2010-Mar-31 21:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.145 (still bad) 2010-Mar-31 21:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.143 (still bad) 2010-Mar-31 21:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.145 (still bad) 2010-Mar-31 21:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.140 (still bad) 2010-Mar-31 21:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.142 (still bad) 2010-Mar-31 21:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.145 (still bad) 2010-Mar-31 21:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.143 (still bad) 2010-Mar-31 21:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.146 (still bad) 2010-Mar-31 21:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.145 (still bad) 2010-Mar-31 21:48:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Mar-31 21:48:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.144 0.992 0.972 2010-Mar-31 21:48:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.119 1.100 0.969 2010-Mar-31 21:48:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.857 1.131 0.976 2010-Mar-31 21:48:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.904 1.007 1.048 2010-Mar-31 21:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.146 (still bad) 2010-Mar-31 21:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.147 (still bad) 2010-Mar-31 21:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.144 (still bad) 2010-Mar-31 21:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.146 (still bad) 2010-Mar-31 21:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.147 (still bad) 2010-Mar-31 21:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 21:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.150 (still bad) 2010-Mar-31 21:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.147 (still bad) 2010-Mar-31 21:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.146 (still bad) 2010-Mar-31 21:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 21:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.146 (still bad) 2010-Mar-31 21:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.146 (still bad) 2010-Mar-31 21:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 21:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.145 (still bad) 2010-Mar-31 21:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.146 (still bad) 2010-Mar-31 21:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.142 (still bad) 2010-Mar-31 21:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.144 (still bad) 2010-Mar-31 21:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.146 (still bad) 2010-Mar-31 21:48:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:48:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:48:53 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Mar-31 21:48:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:48:53 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2010-Mar-31 21:48:53 LOG1 fixed_driftmap: New position: year = 2010.2488951314422 RA = 10:25:46.0 RA/Dec = 10:26:21.6 +19:17:25.2 2010-Mar-31 21:48:53 NOTE fixed_driftmap: Correcting ZA to 6:29:31.6 ... 2010-Mar-31 21:48:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4921234118 -CF 2010-Mar-31 21:48:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:48:53 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:48:53 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Mar-31 21:48:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:48:53 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:48:53 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Mar-31 21:48:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:48:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:48:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:48:53 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:48:53 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4921234118 -CF 2010-Mar-31 21:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.146 (still bad) 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:48:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:48:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:48:53 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:48:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:48:54 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:48:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:48:54 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:48:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:48:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:48:54 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:48:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:48:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:48:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:48:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:48:54 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:48:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:48:54 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:48:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:48:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:48:54 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:48:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:48:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:48:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:48:54 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:48:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:48:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:48:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:48:54 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:48:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:48:54 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:48:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:48:54 INFO2 take_data: Starting WAPP 1-second scan: 9000089 2010-Mar-31 21:48:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:48:54 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Mar-31 21:48:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:48:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:48:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6535.00 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:48:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:48:56 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:48:56 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:48:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:48:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:48:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:48:56 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:48:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.550 (still bad) 2010-Mar-31 21:48:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:48:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:48:56 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:48:56 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:48:56 LOG5 finish_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:48:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:48:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:48:56 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Mar-31 21:48:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Mar-31 21:48:56 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Mar-31 21:48:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:48:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:48:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:48:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:48:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:48:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:48:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:48:57 LOG5 begin_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2010-Mar-31 21:48:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:48:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:48:57 INFO2 take_data: Starting WAPP 600-second scan: 9000090 2010-Mar-31 21:48:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:48:57 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Mar-31 21:48:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:48:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:48:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:48:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6538.00 2010-Mar-31 21:48:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0015.fits 2010-Mar-31 21:48:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0015.fits} 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.573 (still bad) 2010-Mar-31 21:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.148 (still bad) 2010-Mar-31 21:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.148 (still bad) 2010-Mar-31 21:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.149 (still bad) 2010-Mar-31 21:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.147 (still bad) 2010-Mar-31 21:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 21:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.145 (still bad) 2010-Mar-31 21:49:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 21:49:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.153 0.996 0.974 2010-Mar-31 21:49:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.125 1.108 0.975 2010-Mar-31 21:49:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.864 1.138 0.986 2010-Mar-31 21:49:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.893 1.000 1.038 2010-Mar-31 21:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.146 (still bad) 2010-Mar-31 21:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.144 (still bad) 2010-Mar-31 21:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.146 (still bad) 2010-Mar-31 21:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.144 (still bad) 2010-Mar-31 21:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.143 (still bad) 2010-Mar-31 21:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.150 (still bad) 2010-Mar-31 21:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.145 (still bad) 2010-Mar-31 21:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.145 (still bad) 2010-Mar-31 21:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.145 (still bad) 2010-Mar-31 21:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 21:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.145 (still bad) 2010-Mar-31 21:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.147 (still bad) 2010-Mar-31 21:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.146 (still bad) 2010-Mar-31 21:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.147 (still bad) 2010-Mar-31 21:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.149 (still bad) 2010-Mar-31 21:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.147 (still bad) 2010-Mar-31 21:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 21:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.149 (still bad) 2010-Mar-31 21:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.147 (still bad) 2010-Mar-31 21:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.146 (still bad) 2010-Mar-31 21:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.147 (still bad) 2010-Mar-31 21:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.146 (still bad) 2010-Mar-31 21:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.148 (still bad) 2010-Mar-31 21:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.147 (still bad) 2010-Mar-31 21:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.148 (still bad) 2010-Mar-31 21:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.145 (still bad) 2010-Mar-31 21:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.145 (still bad) 2010-Mar-31 21:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.144 (still bad) 2010-Mar-31 21:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.146 (still bad) 2010-Mar-31 21:50:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 21:50:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.145 0.991 0.968 2010-Mar-31 21:50:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.119 1.103 0.969 2010-Mar-31 21:50:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.860 1.131 0.973 2010-Mar-31 21:50:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.885 0.992 1.028 2010-Mar-31 21:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.146 (still bad) 2010-Mar-31 21:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.145 (still bad) 2010-Mar-31 21:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.146 (still bad) 2010-Mar-31 21:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.146 (still bad) 2010-Mar-31 21:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.147 (still bad) 2010-Mar-31 21:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.147 (still bad) 2010-Mar-31 21:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.147 (still bad) 2010-Mar-31 21:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.148 (still bad) 2010-Mar-31 21:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.147 (still bad) 2010-Mar-31 21:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.146 (still bad) 2010-Mar-31 21:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.147 (still bad) 2010-Mar-31 21:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.147 (still bad) 2010-Mar-31 21:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.146 (still bad) 2010-Mar-31 21:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.147 (still bad) 2010-Mar-31 21:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.152 (still bad) 2010-Mar-31 21:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.161 (still bad) 2010-Mar-31 21:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.154 (still bad) 2010-Mar-31 21:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.155 (still bad) 2010-Mar-31 21:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.158 (still bad) 2010-Mar-31 21:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.155 (still bad) 2010-Mar-31 21:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 21:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 21:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.153 (still bad) 2010-Mar-31 21:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.149 (still bad) 2010-Mar-31 21:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.149 (still bad) 2010-Mar-31 21:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 21:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.147 (still bad) 2010-Mar-31 21:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.156 (still bad) 2010-Mar-31 21:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.146 (still bad) 2010-Mar-31 21:51:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.519 < 0.75)! 2010-Mar-31 21:51:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.147 0.990 0.966 2010-Mar-31 21:51:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.519 1.119 1.099 0.967 2010-Mar-31 21:51:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.858 1.133 0.979 2010-Mar-31 21:51:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.887 0.991 1.029 2010-Mar-31 21:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.150 (still bad) 2010-Mar-31 21:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.146 (still bad) 2010-Mar-31 21:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.149 (still bad) 2010-Mar-31 21:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.158 (still bad) 2010-Mar-31 21:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.149 (still bad) 2010-Mar-31 21:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.148 (still bad) 2010-Mar-31 21:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.151 (still bad) 2010-Mar-31 21:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.147 (still bad) 2010-Mar-31 21:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.148 (still bad) 2010-Mar-31 21:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.153 (still bad) 2010-Mar-31 21:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.146 (still bad) 2010-Mar-31 21:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.148 (still bad) 2010-Mar-31 21:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.148 (still bad) 2010-Mar-31 21:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 21:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.147 (still bad) 2010-Mar-31 21:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.155 (still bad) 2010-Mar-31 21:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 21:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.147 (still bad) 2010-Mar-31 21:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 21:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.144 (still bad) 2010-Mar-31 21:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.147 (still bad) 2010-Mar-31 21:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.155 (still bad) 2010-Mar-31 21:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.147 (still bad) 2010-Mar-31 21:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.150 (still bad) 2010-Mar-31 21:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.147 (still bad) 2010-Mar-31 21:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.147 (still bad) 2010-Mar-31 21:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.153 (still bad) 2010-Mar-31 21:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.147 (still bad) 2010-Mar-31 21:52:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 21:52:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.147 0.991 0.967 2010-Mar-31 21:52:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.117 1.102 0.970 2010-Mar-31 21:52:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.861 1.130 0.978 2010-Mar-31 21:52:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.888 0.997 1.032 2010-Mar-31 21:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.149 (still bad) 2010-Mar-31 21:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.145 (still bad) 2010-Mar-31 21:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.148 (still bad) 2010-Mar-31 21:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.154 (still bad) 2010-Mar-31 21:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.149 (still bad) 2010-Mar-31 21:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.151 (still bad) 2010-Mar-31 21:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.148 (still bad) 2010-Mar-31 21:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.150 (still bad) 2010-Mar-31 21:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.151 (still bad) 2010-Mar-31 21:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.151 (still bad) 2010-Mar-31 21:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.150 (still bad) 2010-Mar-31 21:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.148 (still bad) 2010-Mar-31 21:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.148 (still bad) 2010-Mar-31 21:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.148 (still bad) 2010-Mar-31 21:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.150 (still bad) 2010-Mar-31 21:52:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.861 and 1.150 2010-Mar-31 21:53:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.737 < 0.75)! 2010-Mar-31 21:53:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.149 0.992 0.967 2010-Mar-31 21:53:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.737 1.121 1.102 0.969 2010-Mar-31 21:53:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.861 1.134 0.980 2010-Mar-31 21:53:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.887 0.992 1.030 2010-Mar-31 21:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.149 (still bad) 2010-Mar-31 21:53:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.782 and 1.150 2010-Mar-31 21:53:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.75)! 2010-Mar-31 21:53:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.146 0.993 0.969 2010-Mar-31 21:53:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.744 1.120 1.102 0.969 2010-Mar-31 21:53:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.862 1.132 0.978 2010-Mar-31 21:53:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.888 0.993 1.030 2010-Mar-31 21:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.150 (still bad) 2010-Mar-31 21:53:14 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.854 and 1.150 2010-Mar-31 21:53:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.75)! 2010-Mar-31 21:53:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.150 1.000 0.975 2010-Mar-31 21:53:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.700 1.118 1.101 0.970 2010-Mar-31 21:53:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.862 1.133 0.980 2010-Mar-31 21:53:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.888 0.994 1.031 2010-Mar-31 21:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.149 (still bad) 2010-Mar-31 21:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.148 (still bad) 2010-Mar-31 21:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.151 (still bad) 2010-Mar-31 21:53:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.762 and 1.149 2010-Mar-31 21:53:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.75)! 2010-Mar-31 21:53:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.147 0.993 0.972 2010-Mar-31 21:53:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 1.120 1.101 0.968 2010-Mar-31 21:53:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.860 1.131 0.978 2010-Mar-31 21:53:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.887 0.993 1.030 2010-Mar-31 21:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.149 (still bad) 2010-Mar-31 21:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.148 (still bad) 2010-Mar-31 21:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.729 and 1.147 (still bad) 2010-Mar-31 21:53:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.146 2010-Mar-31 21:53:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.700 < 0.75)! 2010-Mar-31 21:53:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.145 0.992 0.968 2010-Mar-31 21:53:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.700 1.120 1.102 0.969 2010-Mar-31 21:53:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.861 1.131 0.978 2010-Mar-31 21:53:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.896 1.003 1.040 2010-Mar-31 21:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.147 (still bad) 2010-Mar-31 21:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.147 (still bad) 2010-Mar-31 21:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.146 (still bad) 2010-Mar-31 21:53:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.770 and 1.147 2010-Mar-31 21:53:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.75)! 2010-Mar-31 21:53:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.147 0.990 0.970 2010-Mar-31 21:53:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.732 1.120 1.102 0.969 2010-Mar-31 21:53:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.859 1.129 0.976 2010-Mar-31 21:53:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.891 0.996 1.034 2010-Mar-31 21:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.145 (still bad) 2010-Mar-31 21:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.146 (still bad) 2010-Mar-31 21:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.144 (still bad) 2010-Mar-31 21:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.145 (still bad) 2010-Mar-31 21:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.145 (still bad) 2010-Mar-31 21:54:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.756 and 1.145 2010-Mar-31 21:54:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.75)! 2010-Mar-31 21:54:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.147 0.992 0.971 2010-Mar-31 21:54:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.736 1.125 1.103 0.971 2010-Mar-31 21:54:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.861 1.133 0.977 2010-Mar-31 21:54:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.888 0.994 1.033 2010-Mar-31 21:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.147 (still bad) 2010-Mar-31 21:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.146 (still bad) 2010-Mar-31 21:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.747 and 1.146 (still bad) 2010-Mar-31 21:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.145 (still bad) 2010-Mar-31 21:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.711 and 1.153 (still bad) 2010-Mar-31 21:54:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.750 and 1.146 2010-Mar-31 21:54:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.75)! 2010-Mar-31 21:54:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.148 0.999 0.975 2010-Mar-31 21:54:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.743 1.121 1.121 0.987 2010-Mar-31 21:54:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.860 1.131 0.978 2010-Mar-31 21:54:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.887 0.994 1.030 2010-Mar-31 21:54:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.758 and 1.149 2010-Mar-31 21:54:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.740 < 0.75)! 2010-Mar-31 21:54:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.149 1.003 0.980 2010-Mar-31 21:54:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.740 1.123 1.110 0.976 2010-Mar-31 21:54:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.859 1.129 0.977 2010-Mar-31 21:54:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.887 0.994 1.030 2010-Mar-31 21:54:43 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.774 and 1.152 2010-Mar-31 21:54:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.742 < 0.75)! 2010-Mar-31 21:54:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.147 1.003 0.980 2010-Mar-31 21:54:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.742 1.123 1.105 0.973 2010-Mar-31 21:54:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.866 1.132 0.979 2010-Mar-31 21:54:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.886 0.994 1.029 2010-Mar-31 21:54:49 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.867 and 1.152 2010-Mar-31 21:55:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.707 < 0.75)! 2010-Mar-31 21:55:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.149 0.991 0.969 2010-Mar-31 21:55:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.707 1.120 1.111 0.976 2010-Mar-31 21:55:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.860 1.131 0.978 2010-Mar-31 21:55:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.886 0.992 1.028 2010-Mar-31 21:55:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.770 and 1.148 2010-Mar-31 21:55:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.696 < 0.75)! 2010-Mar-31 21:55:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.152 0.992 0.969 2010-Mar-31 21:55:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.696 1.120 1.111 0.978 2010-Mar-31 21:55:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.862 1.133 0.979 2010-Mar-31 21:55:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.888 0.994 1.030 2010-Mar-31 21:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.149 (still bad) 2010-Mar-31 21:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.147 (still bad) 2010-Mar-31 21:56:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.154 2010-Mar-31 21:56:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.731 < 0.75)! 2010-Mar-31 21:56:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.144 0.989 0.966 2010-Mar-31 21:56:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.731 1.118 1.103 0.970 2010-Mar-31 21:56:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.861 1.130 0.977 2010-Mar-31 21:56:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.885 0.993 1.028 2010-Mar-31 21:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.149 (still bad) 2010-Mar-31 21:56:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.769 and 1.145 2010-Mar-31 21:56:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.735 < 0.75)! 2010-Mar-31 21:56:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.147 0.991 0.969 2010-Mar-31 21:56:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.735 1.120 1.102 0.970 2010-Mar-31 21:56:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.861 1.131 0.979 2010-Mar-31 21:56:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.884 0.994 1.027 2010-Mar-31 21:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.152 (still bad) 2010-Mar-31 21:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.146 (still bad) 2010-Mar-31 21:56:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.765 and 1.145 2010-Mar-31 21:56:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.709 < 0.75)! 2010-Mar-31 21:56:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.149 0.992 0.970 2010-Mar-31 21:56:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.709 1.121 1.102 0.970 2010-Mar-31 21:56:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.864 1.135 0.980 2010-Mar-31 21:56:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.889 0.995 1.032 2010-Mar-31 21:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.707 and 1.146 (still bad) 2010-Mar-31 21:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.145 (still bad) 2010-Mar-31 21:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.151 (still bad) 2010-Mar-31 21:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.144 (still bad) 2010-Mar-31 21:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.144 (still bad) 2010-Mar-31 21:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.148 (still bad) 2010-Mar-31 21:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.143 (still bad) 2010-Mar-31 21:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.153 (still bad) 2010-Mar-31 21:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.146 (still bad) 2010-Mar-31 21:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.145 (still bad) 2010-Mar-31 21:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.146 (still bad) 2010-Mar-31 21:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.141 (still bad) 2010-Mar-31 21:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.145 (still bad) 2010-Mar-31 21:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.151 (still bad) 2010-Mar-31 21:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.143 (still bad) 2010-Mar-31 21:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.144 (still bad) 2010-Mar-31 21:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 21:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.145 (still bad) 2010-Mar-31 21:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.143 (still bad) 2010-Mar-31 21:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.153 (still bad) 2010-Mar-31 21:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.143 (still bad) 2010-Mar-31 21:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.142 (still bad) 2010-Mar-31 21:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.145 (still bad) 2010-Mar-31 21:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 21:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.145 (still bad) 2010-Mar-31 21:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 21:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.141 (still bad) 2010-Mar-31 21:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.141 (still bad) 2010-Mar-31 21:57:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.556 < 0.75)! 2010-Mar-31 21:57:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.142 0.991 0.969 2010-Mar-31 21:57:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.556 1.117 1.103 0.970 2010-Mar-31 21:57:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.859 1.134 0.978 2010-Mar-31 21:57:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.887 0.992 1.029 2010-Mar-31 21:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.142 (still bad) 2010-Mar-31 21:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.143 (still bad) 2010-Mar-31 21:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.149 (still bad) 2010-Mar-31 21:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.146 (still bad) 2010-Mar-31 21:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.146 (still bad) 2010-Mar-31 21:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.145 (still bad) 2010-Mar-31 21:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.143 (still bad) 2010-Mar-31 21:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.603 and 1.145 (still bad) 2010-Mar-31 21:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.145 (still bad) 2010-Mar-31 21:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.146 (still bad) 2010-Mar-31 21:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.146 (still bad) 2010-Mar-31 21:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.142 (still bad) 2010-Mar-31 21:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.642 and 1.144 (still bad) 2010-Mar-31 21:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.145 (still bad) 2010-Mar-31 21:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.144 (still bad) 2010-Mar-31 21:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.145 (still bad) 2010-Mar-31 21:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.142 (still bad) 2010-Mar-31 21:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.144 (still bad) 2010-Mar-31 21:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.146 (still bad) 2010-Mar-31 21:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.144 (still bad) 2010-Mar-31 21:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.146 (still bad) 2010-Mar-31 21:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.142 (still bad) 2010-Mar-31 21:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.144 (still bad) 2010-Mar-31 21:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.142 (still bad) 2010-Mar-31 21:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.144 (still bad) 2010-Mar-31 21:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.143 (still bad) 2010-Mar-31 21:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.142 (still bad) 2010-Mar-31 21:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.146 (still bad) 2010-Mar-31 21:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.144 (still bad) 2010-Mar-31 21:58:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 21:58:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.143 0.989 0.967 2010-Mar-31 21:58:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.119 1.098 0.968 2010-Mar-31 21:58:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.860 1.133 0.975 2010-Mar-31 21:58:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.885 0.991 1.029 2010-Mar-31 21:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.145 (still bad) 2010-Mar-31 21:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.143 (still bad) 2010-Mar-31 21:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.142 (still bad) 2010-Mar-31 21:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.145 (still bad) 2010-Mar-31 21:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.141 (still bad) 2010-Mar-31 21:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.144 (still bad) 2010-Mar-31 21:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.144 (still bad) 2010-Mar-31 21:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.146 (still bad) 2010-Mar-31 21:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.145 (still bad) 2010-Mar-31 21:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.143 (still bad) 2010-Mar-31 21:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.142 (still bad) 2010-Mar-31 21:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.142 (still bad) 2010-Mar-31 21:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.143 (still bad) 2010-Mar-31 21:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.144 (still bad) 2010-Mar-31 21:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.144 (still bad) 2010-Mar-31 21:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.145 (still bad) 2010-Mar-31 21:58:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:58:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:58:58 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:58:58 LOG5 end_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG1 fixed_driftmap: New position: year = 2010.2489143027353 RA = 10:35:50.4 RA/Dec = 10:36:25.9 +19:17:21.3 2010-Mar-31 21:58:58 NOTE fixed_driftmap: Correcting ZA to 6:29:00.7 ... 2010-Mar-31 21:58:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4835174612 -CF 2010-Mar-31 21:58:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 21:58:58 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 21:58:58 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 21:58:58 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 21:58:58 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 21:58:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 21:58:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:58:58 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 21:58:58 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4835174612 -CF 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 21:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.144 (still bad) 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 21:58:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 21:58:58 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 21:58:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:58:58 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 21:58:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:58:58 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Mar-31 21:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 21:58:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:58:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:58:59 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:58:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 21:58:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 21:58:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:58:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 21:58:59 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 21:58:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 21:58:59 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 21:58:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 21:58:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 21:58:59 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 21:58:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 21:58:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 21:58:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:58:59 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:58:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 21:58:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:58:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:58:59 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 21:58:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:58:59 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 21:58:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:58:59 INFO2 take_data: Starting WAPP 1-second scan: 9000091 2010-Mar-31 21:58:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:58:59 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Mar-31 21:58:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:58:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 21:58:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7140.00 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 21:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.546 (still bad) 2010-Mar-31 21:59:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 21:59:01 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Mar-31 21:59:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 21:59:01 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Mar-31 21:59:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 21:59:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 21:59:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 21:59:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 21:59:01 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 21:59:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 21:59:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 21:59:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 21:59:02 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 21:59:02 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 21:59:02 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 21:59:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 21:59:02 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Mar-31 21:59:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:59:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:59:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:59:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 21:59:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 21:59:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 21:59:02 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 21:59:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 21:59:02 INFO2 take_data: Starting WAPP 600-second scan: 9000092 2010-Mar-31 21:59:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 21:59:02 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Mar-31 21:59:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 21:59:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 21:59:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7143.00 2010-Mar-31 21:59:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0016.fits 2010-Mar-31 21:59:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0016.fits} 2010-Mar-31 21:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.572 (still bad) 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 21:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.143 (still bad) 2010-Mar-31 21:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.142 (still bad) 2010-Mar-31 21:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.145 (still bad) 2010-Mar-31 21:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.143 (still bad) 2010-Mar-31 21:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.147 (still bad) 2010-Mar-31 21:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.143 (still bad) 2010-Mar-31 21:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.141 (still bad) 2010-Mar-31 21:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.145 (still bad) 2010-Mar-31 21:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.141 (still bad) 2010-Mar-31 21:59:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 21:59:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.143 0.993 0.970 2010-Mar-31 21:59:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.117 1.102 0.969 2010-Mar-31 21:59:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.858 1.128 0.976 2010-Mar-31 21:59:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.886 0.993 1.028 2010-Mar-31 21:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.144 (still bad) 2010-Mar-31 21:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.142 (still bad) 2010-Mar-31 21:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.144 (still bad) 2010-Mar-31 21:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.145 (still bad) 2010-Mar-31 21:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.140 (still bad) 2010-Mar-31 21:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.144 (still bad) 2010-Mar-31 21:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.151 (still bad) 2010-Mar-31 21:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.143 (still bad) 2010-Mar-31 21:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.141 (still bad) 2010-Mar-31 21:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.146 (still bad) 2010-Mar-31 21:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.141 (still bad) 2010-Mar-31 21:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.145 (still bad) 2010-Mar-31 21:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.151 (still bad) 2010-Mar-31 21:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.145 (still bad) 2010-Mar-31 21:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.143 (still bad) 2010-Mar-31 21:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.147 (still bad) 2010-Mar-31 21:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.144 (still bad) 2010-Mar-31 22:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 22:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.151 (still bad) 2010-Mar-31 22:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.145 (still bad) 2010-Mar-31 22:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.142 (still bad) 2010-Mar-31 22:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.150 (still bad) 2010-Mar-31 22:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.143 (still bad) 2010-Mar-31 22:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.147 (still bad) 2010-Mar-31 22:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.154 (still bad) 2010-Mar-31 22:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 22:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.145 (still bad) 2010-Mar-31 22:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.148 (still bad) 2010-Mar-31 22:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.146 (still bad) 2010-Mar-31 22:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.147 (still bad) 2010-Mar-31 22:00:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 22:00:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.150 0.993 0.973 2010-Mar-31 22:00:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.123 1.114 0.980 2010-Mar-31 22:00:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.864 1.135 0.984 2010-Mar-31 22:00:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.887 0.993 1.028 2010-Mar-31 22:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.146 (still bad) 2010-Mar-31 22:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.144 (still bad) 2010-Mar-31 22:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.148 (still bad) 2010-Mar-31 22:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.144 (still bad) 2010-Mar-31 22:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.145 (still bad) 2010-Mar-31 22:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.151 (still bad) 2010-Mar-31 22:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.145 (still bad) 2010-Mar-31 22:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.143 (still bad) 2010-Mar-31 22:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.146 (still bad) 2010-Mar-31 22:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.144 (still bad) 2010-Mar-31 22:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.144 (still bad) 2010-Mar-31 22:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.145 (still bad) 2010-Mar-31 22:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.145 (still bad) 2010-Mar-31 22:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.144 (still bad) 2010-Mar-31 22:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.143 (still bad) 2010-Mar-31 22:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.146 (still bad) 2010-Mar-31 22:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.148 (still bad) 2010-Mar-31 22:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.144 (still bad) 2010-Mar-31 22:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.147 (still bad) 2010-Mar-31 22:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.143 (still bad) 2010-Mar-31 22:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.146 (still bad) 2010-Mar-31 22:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.146 (still bad) 2010-Mar-31 22:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 22:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.146 (still bad) 2010-Mar-31 22:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.146 (still bad) 2010-Mar-31 22:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.146 (still bad) 2010-Mar-31 22:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.146 (still bad) 2010-Mar-31 22:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.149 (still bad) 2010-Mar-31 22:01:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.505 < 0.75)! 2010-Mar-31 22:01:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.147 0.989 0.969 2010-Mar-31 22:01:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.505 1.120 1.103 0.971 2010-Mar-31 22:01:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.865 1.138 0.983 2010-Mar-31 22:01:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.889 0.993 1.031 2010-Mar-31 22:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.147 (still bad) 2010-Mar-31 22:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.148 (still bad) 2010-Mar-31 22:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.147 (still bad) 2010-Mar-31 22:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.149 (still bad) 2010-Mar-31 22:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.150 (still bad) 2010-Mar-31 22:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.149 (still bad) 2010-Mar-31 22:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.147 (still bad) 2010-Mar-31 22:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.147 (still bad) 2010-Mar-31 22:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.146 (still bad) 2010-Mar-31 22:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.147 (still bad) 2010-Mar-31 22:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.149 (still bad) 2010-Mar-31 22:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.149 (still bad) 2010-Mar-31 22:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.146 (still bad) 2010-Mar-31 22:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.147 (still bad) 2010-Mar-31 22:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 22:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.146 (still bad) 2010-Mar-31 22:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.149 (still bad) 2010-Mar-31 22:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.150 (still bad) 2010-Mar-31 22:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.146 (still bad) 2010-Mar-31 22:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.147 (still bad) 2010-Mar-31 22:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.147 (still bad) 2010-Mar-31 22:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.147 (still bad) 2010-Mar-31 22:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.149 (still bad) 2010-Mar-31 22:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.147 (still bad) 2010-Mar-31 22:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.145 (still bad) 2010-Mar-31 22:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 22:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.145 (still bad) 2010-Mar-31 22:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.144 (still bad) 2010-Mar-31 22:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.147 (still bad) 2010-Mar-31 22:02:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 22:02:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.147 0.992 0.968 2010-Mar-31 22:02:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.119 1.101 0.970 2010-Mar-31 22:02:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.860 1.130 0.977 2010-Mar-31 22:02:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.885 0.991 1.027 2010-Mar-31 22:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 22:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.149 (still bad) 2010-Mar-31 22:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.145 (still bad) 2010-Mar-31 22:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.145 (still bad) 2010-Mar-31 22:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.154 (still bad) 2010-Mar-31 22:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.146 (still bad) 2010-Mar-31 22:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.145 (still bad) 2010-Mar-31 22:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.149 (still bad) 2010-Mar-31 22:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.146 (still bad) 2010-Mar-31 22:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.147 (still bad) 2010-Mar-31 22:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.152 (still bad) 2010-Mar-31 22:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.144 (still bad) 2010-Mar-31 22:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.145 (still bad) 2010-Mar-31 22:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.146 (still bad) 2010-Mar-31 22:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.147 (still bad) 2010-Mar-31 22:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.147 (still bad) 2010-Mar-31 22:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.156 (still bad) 2010-Mar-31 22:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.148 (still bad) 2010-Mar-31 22:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.146 (still bad) 2010-Mar-31 22:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.749 and 1.149 (still bad) 2010-Mar-31 22:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.148 (still bad) 2010-Mar-31 22:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.148 (still bad) 2010-Mar-31 22:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.154 (still bad) 2010-Mar-31 22:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 22:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.148 (still bad) 2010-Mar-31 22:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.146 (still bad) 2010-Mar-31 22:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.149 (still bad) 2010-Mar-31 22:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:03:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.509 < 0.75)! 2010-Mar-31 22:03:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.148 0.989 0.967 2010-Mar-31 22:03:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.509 1.116 1.100 0.967 2010-Mar-31 22:03:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.860 1.132 0.978 2010-Mar-31 22:03:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.888 0.993 1.029 2010-Mar-31 22:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.152 (still bad) 2010-Mar-31 22:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.146 (still bad) 2010-Mar-31 22:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.157 (still bad) 2010-Mar-31 22:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.149 (still bad) 2010-Mar-31 22:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.151 (still bad) 2010-Mar-31 22:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 22:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.158 (still bad) 2010-Mar-31 22:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.149 (still bad) 2010-Mar-31 22:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.150 (still bad) 2010-Mar-31 22:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.151 (still bad) 2010-Mar-31 22:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.147 (still bad) 2010-Mar-31 22:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.148 (still bad) 2010-Mar-31 22:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.154 (still bad) 2010-Mar-31 22:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.148 (still bad) 2010-Mar-31 22:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.146 (still bad) 2010-Mar-31 22:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.148 (still bad) 2010-Mar-31 22:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.147 (still bad) 2010-Mar-31 22:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.148 (still bad) 2010-Mar-31 22:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.149 (still bad) 2010-Mar-31 22:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.148 (still bad) 2010-Mar-31 22:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.147 (still bad) 2010-Mar-31 22:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.149 (still bad) 2010-Mar-31 22:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.145 (still bad) 2010-Mar-31 22:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.147 (still bad) 2010-Mar-31 22:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.150 (still bad) 2010-Mar-31 22:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.147 (still bad) 2010-Mar-31 22:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.145 (still bad) 2010-Mar-31 22:04:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.500 < 0.75)! 2010-Mar-31 22:04:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.148 0.990 0.966 2010-Mar-31 22:04:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.500 1.120 1.103 0.970 2010-Mar-31 22:04:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.861 1.134 0.977 2010-Mar-31 22:04:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.886 0.994 1.027 2010-Mar-31 22:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.148 (still bad) 2010-Mar-31 22:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.147 (still bad) 2010-Mar-31 22:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.152 (still bad) 2010-Mar-31 22:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 22:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.148 (still bad) 2010-Mar-31 22:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.149 (still bad) 2010-Mar-31 22:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.147 (still bad) 2010-Mar-31 22:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.147 (still bad) 2010-Mar-31 22:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.152 (still bad) 2010-Mar-31 22:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.147 (still bad) 2010-Mar-31 22:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.147 (still bad) 2010-Mar-31 22:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.147 (still bad) 2010-Mar-31 22:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.149 (still bad) 2010-Mar-31 22:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.156 (still bad) 2010-Mar-31 22:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.148 (still bad) 2010-Mar-31 22:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.149 (still bad) 2010-Mar-31 22:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.150 (still bad) 2010-Mar-31 22:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.154 (still bad) 2010-Mar-31 22:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.147 (still bad) 2010-Mar-31 22:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.145 (still bad) 2010-Mar-31 22:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.149 (still bad) 2010-Mar-31 22:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.144 (still bad) 2010-Mar-31 22:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.146 (still bad) 2010-Mar-31 22:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.155 (still bad) 2010-Mar-31 22:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.147 (still bad) 2010-Mar-31 22:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:05:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 22:05:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.152 0.989 0.969 2010-Mar-31 22:05:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.124 1.104 0.972 2010-Mar-31 22:05:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.860 1.133 0.977 2010-Mar-31 22:05:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.886 0.993 1.029 2010-Mar-31 22:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.150 (still bad) 2010-Mar-31 22:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.149 (still bad) 2010-Mar-31 22:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.156 (still bad) 2010-Mar-31 22:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.146 (still bad) 2010-Mar-31 22:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.146 (still bad) 2010-Mar-31 22:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.152 (still bad) 2010-Mar-31 22:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.148 (still bad) 2010-Mar-31 22:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 22:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.148 (still bad) 2010-Mar-31 22:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.149 (still bad) 2010-Mar-31 22:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.148 (still bad) 2010-Mar-31 22:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.146 (still bad) 2010-Mar-31 22:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.150 (still bad) 2010-Mar-31 22:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.150 (still bad) 2010-Mar-31 22:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.148 (still bad) 2010-Mar-31 22:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.151 (still bad) 2010-Mar-31 22:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.149 (still bad) 2010-Mar-31 22:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.149 (still bad) 2010-Mar-31 22:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.151 (still bad) 2010-Mar-31 22:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.151 (still bad) 2010-Mar-31 22:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.150 (still bad) 2010-Mar-31 22:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.152 (still bad) 2010-Mar-31 22:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.154 (still bad) 2010-Mar-31 22:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.153 (still bad) 2010-Mar-31 22:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.153 (still bad) 2010-Mar-31 22:06:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 22:06:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.151 0.993 0.970 2010-Mar-31 22:06:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.127 1.147 1.008 2010-Mar-31 22:06:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.860 1.135 0.978 2010-Mar-31 22:06:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.886 0.995 1.030 2010-Mar-31 22:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.150 (still bad) 2010-Mar-31 22:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.155 (still bad) 2010-Mar-31 22:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.158 (still bad) 2010-Mar-31 22:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.165 (still bad) 2010-Mar-31 22:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.174 (still bad) 2010-Mar-31 22:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.181 (still bad) 2010-Mar-31 22:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.186 (still bad) 2010-Mar-31 22:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.189 (still bad) 2010-Mar-31 22:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.190 (still bad) 2010-Mar-31 22:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.188 (still bad) 2010-Mar-31 22:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.183 (still bad) 2010-Mar-31 22:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.176 (still bad) 2010-Mar-31 22:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 22:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.165 (still bad) 2010-Mar-31 22:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 22:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.187 (still bad) 2010-Mar-31 22:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.196 (still bad) 2010-Mar-31 22:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.207 (still bad) 2010-Mar-31 22:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.217 (still bad) 2010-Mar-31 22:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.213 (still bad) 2010-Mar-31 22:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.202 (still bad) 2010-Mar-31 22:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.192 (still bad) 2010-Mar-31 22:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.179 (still bad) 2010-Mar-31 22:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.165 (still bad) 2010-Mar-31 22:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.161 (still bad) 2010-Mar-31 22:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.153 (still bad) 2010-Mar-31 22:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.147 (still bad) 2010-Mar-31 22:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.151 (still bad) 2010-Mar-31 22:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.150 (still bad) 2010-Mar-31 22:07:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.560 < 0.75)! 2010-Mar-31 22:07:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.147 0.991 0.966 2010-Mar-31 22:07:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.560 1.118 1.104 0.969 2010-Mar-31 22:07:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.862 1.143 0.986 2010-Mar-31 22:07:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.884 0.996 1.027 2010-Mar-31 22:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.150 (still bad) 2010-Mar-31 22:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.148 (still bad) 2010-Mar-31 22:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.151 (still bad) 2010-Mar-31 22:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.147 (still bad) 2010-Mar-31 22:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.150 (still bad) 2010-Mar-31 22:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.153 (still bad) 2010-Mar-31 22:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.151 (still bad) 2010-Mar-31 22:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.151 (still bad) 2010-Mar-31 22:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.153 (still bad) 2010-Mar-31 22:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.150 (still bad) 2010-Mar-31 22:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.149 (still bad) 2010-Mar-31 22:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.149 (still bad) 2010-Mar-31 22:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.150 (still bad) 2010-Mar-31 22:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.151 (still bad) 2010-Mar-31 22:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.150 (still bad) 2010-Mar-31 22:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.148 (still bad) 2010-Mar-31 22:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.151 (still bad) 2010-Mar-31 22:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.151 (still bad) 2010-Mar-31 22:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.151 (still bad) 2010-Mar-31 22:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.151 (still bad) 2010-Mar-31 22:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.151 (still bad) 2010-Mar-31 22:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.152 (still bad) 2010-Mar-31 22:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.150 (still bad) 2010-Mar-31 22:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.148 (still bad) 2010-Mar-31 22:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.150 (still bad) 2010-Mar-31 22:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.152 (still bad) 2010-Mar-31 22:08:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.75)! 2010-Mar-31 22:08:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.152 0.993 0.970 2010-Mar-31 22:08:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.525 1.122 1.116 0.981 2010-Mar-31 22:08:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.862 1.132 0.977 2010-Mar-31 22:08:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.883 0.995 1.025 2010-Mar-31 22:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.154 (still bad) 2010-Mar-31 22:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.152 (still bad) 2010-Mar-31 22:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.151 (still bad) 2010-Mar-31 22:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.150 (still bad) 2010-Mar-31 22:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.150 (still bad) 2010-Mar-31 22:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.152 (still bad) 2010-Mar-31 22:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.153 (still bad) 2010-Mar-31 22:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.150 (still bad) 2010-Mar-31 22:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.150 (still bad) 2010-Mar-31 22:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.149 (still bad) 2010-Mar-31 22:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.148 (still bad) 2010-Mar-31 22:09:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:09:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:09:03 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Mar-31 22:09:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:09:03 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2010-Mar-31 22:09:03 LOG1 fixed_driftmap: New position: year = 2010.2489334740285 RA = 10:45:55.1 RA/Dec = 10:46:30.4 +19:17:17.8 2010-Mar-31 22:09:03 NOTE fixed_driftmap: Correcting ZA to 6:28:32.7 ... 2010-Mar-31 22:09:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4757401858 -CF 2010-Mar-31 22:09:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:09:03 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:09:03 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Mar-31 22:09:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:09:03 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:09:03 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Mar-31 22:09:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:09:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:09:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:09:03 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:09:03 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Mar-31 22:09:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4757401858 -CF 2010-Mar-31 22:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:09:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:09:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:09:04 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:09:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:09:04 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:09:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:09:04 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:09:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:09:04 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:09:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:09:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:09:04 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:09:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:09:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:09:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:09:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:09:04 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:09:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:09:04 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:09:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:09:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:09:04 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:09:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:09:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:09:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:09:04 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:09:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:09:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:09:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:09:04 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:09:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:09:04 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:09:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:09:04 INFO2 take_data: Starting WAPP 1-second scan: 9000093 2010-Mar-31 22:09:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:09:04 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Mar-31 22:09:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:09:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.150 (still bad) 2010-Mar-31 22:09:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7745.00 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:09:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:09:06 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:09:06 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:09:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:09:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:09:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:09:06 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:09:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:09:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:09:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:09:06 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:09:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:09:06 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:09:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:09:06 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Mar-31 22:09:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Mar-31 22:09:06 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Mar-31 22:09:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:09:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:09:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:09:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:09:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:09:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:09:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:09:07 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2010-Mar-31 22:09:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:09:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:09:07 INFO2 take_data: Starting WAPP 600-second scan: 9000094 2010-Mar-31 22:09:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:09:07 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Mar-31 22:09:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.551 (still bad) 2010-Mar-31 22:09:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:09:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:09:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7748.00 2010-Mar-31 22:09:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0017.fits 2010-Mar-31 22:09:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0017.fits} 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.577 (still bad) 2010-Mar-31 22:09:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.151 (still bad) 2010-Mar-31 22:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.153 (still bad) 2010-Mar-31 22:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.149 (still bad) 2010-Mar-31 22:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.150 (still bad) 2010-Mar-31 22:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 22:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.148 (still bad) 2010-Mar-31 22:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.148 (still bad) 2010-Mar-31 22:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.149 (still bad) 2010-Mar-31 22:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.151 (still bad) 2010-Mar-31 22:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.147 (still bad) 2010-Mar-31 22:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.148 (still bad) 2010-Mar-31 22:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.146 (still bad) 2010-Mar-31 22:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.144 (still bad) 2010-Mar-31 22:09:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.586 < 0.75)! 2010-Mar-31 22:09:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.148 0.993 0.969 2010-Mar-31 22:09:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.586 1.119 1.105 0.971 2010-Mar-31 22:09:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.861 1.137 0.982 2010-Mar-31 22:09:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.885 0.996 1.028 2010-Mar-31 22:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.147 (still bad) 2010-Mar-31 22:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.146 (still bad) 2010-Mar-31 22:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.146 (still bad) 2010-Mar-31 22:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.636 and 1.147 (still bad) 2010-Mar-31 22:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.148 (still bad) 2010-Mar-31 22:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.148 (still bad) 2010-Mar-31 22:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.147 (still bad) 2010-Mar-31 22:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.147 (still bad) 2010-Mar-31 22:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.148 (still bad) 2010-Mar-31 22:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.148 (still bad) 2010-Mar-31 22:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.149 (still bad) 2010-Mar-31 22:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.150 (still bad) 2010-Mar-31 22:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.642 and 1.149 (still bad) 2010-Mar-31 22:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.147 (still bad) 2010-Mar-31 22:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.148 (still bad) 2010-Mar-31 22:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.149 (still bad) 2010-Mar-31 22:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.152 (still bad) 2010-Mar-31 22:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.151 (still bad) 2010-Mar-31 22:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.148 (still bad) 2010-Mar-31 22:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.151 (still bad) 2010-Mar-31 22:10:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.787 and 1.151 2010-Mar-31 22:10:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.603 < 0.75)! 2010-Mar-31 22:10:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.149 0.991 0.968 2010-Mar-31 22:10:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.603 1.122 1.104 0.971 2010-Mar-31 22:10:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.861 1.132 0.977 2010-Mar-31 22:10:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.886 0.995 1.027 2010-Mar-31 22:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.150 (still bad) 2010-Mar-31 22:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.151 (still bad) 2010-Mar-31 22:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.149 (still bad) 2010-Mar-31 22:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.147 (still bad) 2010-Mar-31 22:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.147 (still bad) 2010-Mar-31 22:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.146 (still bad) 2010-Mar-31 22:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.149 (still bad) 2010-Mar-31 22:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.151 (still bad) 2010-Mar-31 22:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.148 (still bad) 2010-Mar-31 22:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.150 (still bad) 2010-Mar-31 22:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.148 (still bad) 2010-Mar-31 22:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.153 (still bad) 2010-Mar-31 22:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.150 (still bad) 2010-Mar-31 22:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.146 (still bad) 2010-Mar-31 22:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.146 (still bad) 2010-Mar-31 22:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.149 (still bad) 2010-Mar-31 22:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.154 (still bad) 2010-Mar-31 22:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.147 (still bad) 2010-Mar-31 22:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.145 (still bad) 2010-Mar-31 22:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.147 (still bad) 2010-Mar-31 22:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.153 (still bad) 2010-Mar-31 22:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.146 (still bad) 2010-Mar-31 22:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.145 (still bad) 2010-Mar-31 22:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.146 (still bad) 2010-Mar-31 22:11:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2010-Mar-31 22:11:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.152 0.996 0.973 2010-Mar-31 22:11:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.518 1.128 1.108 0.976 2010-Mar-31 22:11:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.865 1.139 0.982 2010-Mar-31 22:11:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.893 1.002 1.036 2010-Mar-31 22:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.151 (still bad) 2010-Mar-31 22:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.147 (still bad) 2010-Mar-31 22:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.147 (still bad) 2010-Mar-31 22:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.152 (still bad) 2010-Mar-31 22:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.150 (still bad) 2010-Mar-31 22:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.148 (still bad) 2010-Mar-31 22:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.150 (still bad) 2010-Mar-31 22:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.148 (still bad) 2010-Mar-31 22:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.149 (still bad) 2010-Mar-31 22:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.154 (still bad) 2010-Mar-31 22:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.153 (still bad) 2010-Mar-31 22:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.149 (still bad) 2010-Mar-31 22:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.151 (still bad) 2010-Mar-31 22:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.150 (still bad) 2010-Mar-31 22:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.155 (still bad) 2010-Mar-31 22:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.151 (still bad) 2010-Mar-31 22:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.150 (still bad) 2010-Mar-31 22:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.151 (still bad) 2010-Mar-31 22:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.150 (still bad) 2010-Mar-31 22:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.153 (still bad) 2010-Mar-31 22:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.153 (still bad) 2010-Mar-31 22:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.155 (still bad) 2010-Mar-31 22:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.152 (still bad) 2010-Mar-31 22:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.150 (still bad) 2010-Mar-31 22:12:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Mar-31 22:12:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.157 0.996 0.971 2010-Mar-31 22:12:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.123 1.107 0.977 2010-Mar-31 22:12:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.866 1.140 0.982 2010-Mar-31 22:12:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.893 1.000 1.037 2010-Mar-31 22:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.149 (still bad) 2010-Mar-31 22:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.152 (still bad) 2010-Mar-31 22:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.150 (still bad) 2010-Mar-31 22:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.156 (still bad) 2010-Mar-31 22:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.150 (still bad) 2010-Mar-31 22:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.151 (still bad) 2010-Mar-31 22:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.152 (still bad) 2010-Mar-31 22:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.149 (still bad) 2010-Mar-31 22:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.150 (still bad) 2010-Mar-31 22:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.152 (still bad) 2010-Mar-31 22:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.150 (still bad) 2010-Mar-31 22:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.152 (still bad) 2010-Mar-31 22:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.153 (still bad) 2010-Mar-31 22:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.153 (still bad) 2010-Mar-31 22:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.151 (still bad) 2010-Mar-31 22:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.153 (still bad) 2010-Mar-31 22:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.152 (still bad) 2010-Mar-31 22:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.151 (still bad) 2010-Mar-31 22:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.151 (still bad) 2010-Mar-31 22:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.151 (still bad) 2010-Mar-31 22:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.153 (still bad) 2010-Mar-31 22:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.153 (still bad) 2010-Mar-31 22:13:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 22:13:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.157 0.996 0.975 2010-Mar-31 22:13:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.128 1.110 0.977 2010-Mar-31 22:13:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.867 1.139 0.984 2010-Mar-31 22:13:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.892 1.003 1.036 2010-Mar-31 22:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.149 (still bad) 2010-Mar-31 22:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.148 (still bad) 2010-Mar-31 22:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.152 (still bad) 2010-Mar-31 22:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.150 (still bad) 2010-Mar-31 22:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.155 (still bad) 2010-Mar-31 22:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.151 (still bad) 2010-Mar-31 22:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.152 (still bad) 2010-Mar-31 22:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.151 (still bad) 2010-Mar-31 22:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.148 (still bad) 2010-Mar-31 22:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.153 (still bad) 2010-Mar-31 22:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.159 (still bad) 2010-Mar-31 22:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.149 (still bad) 2010-Mar-31 22:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.152 (still bad) 2010-Mar-31 22:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.157 (still bad) 2010-Mar-31 22:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.149 (still bad) 2010-Mar-31 22:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.152 (still bad) 2010-Mar-31 22:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.150 (still bad) 2010-Mar-31 22:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.151 (still bad) 2010-Mar-31 22:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.154 (still bad) 2010-Mar-31 22:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.150 (still bad) 2010-Mar-31 22:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.153 (still bad) 2010-Mar-31 22:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.151 (still bad) 2010-Mar-31 22:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.151 (still bad) 2010-Mar-31 22:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.152 (still bad) 2010-Mar-31 22:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.155 (still bad) 2010-Mar-31 22:14:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.520 < 0.75)! 2010-Mar-31 22:14:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.151 0.996 0.975 2010-Mar-31 22:14:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.520 1.118 1.105 0.973 2010-Mar-31 22:14:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.861 1.134 0.979 2010-Mar-31 22:14:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.891 0.997 1.032 2010-Mar-31 22:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.155 (still bad) 2010-Mar-31 22:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.152 (still bad) 2010-Mar-31 22:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.149 (still bad) 2010-Mar-31 22:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.155 (still bad) 2010-Mar-31 22:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.150 (still bad) 2010-Mar-31 22:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.149 (still bad) 2010-Mar-31 22:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.154 (still bad) 2010-Mar-31 22:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.150 (still bad) 2010-Mar-31 22:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.151 (still bad) 2010-Mar-31 22:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.151 (still bad) 2010-Mar-31 22:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.151 (still bad) 2010-Mar-31 22:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.151 (still bad) 2010-Mar-31 22:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.152 (still bad) 2010-Mar-31 22:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.150 (still bad) 2010-Mar-31 22:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.152 (still bad) 2010-Mar-31 22:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.154 (still bad) 2010-Mar-31 22:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.155 (still bad) 2010-Mar-31 22:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.152 (still bad) 2010-Mar-31 22:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.151 (still bad) 2010-Mar-31 22:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.151 (still bad) 2010-Mar-31 22:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.154 (still bad) 2010-Mar-31 22:15:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 22:15:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.150 0.992 0.969 2010-Mar-31 22:15:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.123 1.105 0.972 2010-Mar-31 22:15:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.863 1.134 0.978 2010-Mar-31 22:15:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.889 0.998 1.031 2010-Mar-31 22:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.153 (still bad) 2010-Mar-31 22:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.150 (still bad) 2010-Mar-31 22:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.151 (still bad) 2010-Mar-31 22:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 22:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.151 (still bad) 2010-Mar-31 22:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.150 (still bad) 2010-Mar-31 22:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.153 (still bad) 2010-Mar-31 22:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.152 (still bad) 2010-Mar-31 22:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.152 (still bad) 2010-Mar-31 22:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.160 (still bad) 2010-Mar-31 22:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.154 (still bad) 2010-Mar-31 22:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.154 (still bad) 2010-Mar-31 22:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.152 (still bad) 2010-Mar-31 22:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.152 (still bad) 2010-Mar-31 22:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.161 (still bad) 2010-Mar-31 22:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.151 (still bad) 2010-Mar-31 22:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.151 (still bad) 2010-Mar-31 22:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.155 (still bad) 2010-Mar-31 22:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.152 (still bad) 2010-Mar-31 22:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.154 (still bad) 2010-Mar-31 22:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.153 (still bad) 2010-Mar-31 22:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.152 (still bad) 2010-Mar-31 22:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.154 (still bad) 2010-Mar-31 22:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.156 (still bad) 2010-Mar-31 22:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.157 (still bad) 2010-Mar-31 22:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.154 (still bad) 2010-Mar-31 22:16:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 22:16:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.157 0.997 0.974 2010-Mar-31 22:16:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.124 1.108 0.977 2010-Mar-31 22:16:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.863 1.134 0.979 2010-Mar-31 22:16:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.890 0.998 1.033 2010-Mar-31 22:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.155 (still bad) 2010-Mar-31 22:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.156 (still bad) 2010-Mar-31 22:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 22:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.154 (still bad) 2010-Mar-31 22:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.153 (still bad) 2010-Mar-31 22:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.158 (still bad) 2010-Mar-31 22:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.159 (still bad) 2010-Mar-31 22:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.157 (still bad) 2010-Mar-31 22:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.155 (still bad) 2010-Mar-31 22:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.156 (still bad) 2010-Mar-31 22:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.156 (still bad) 2010-Mar-31 22:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.157 (still bad) 2010-Mar-31 22:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.153 (still bad) 2010-Mar-31 22:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 22:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.156 (still bad) 2010-Mar-31 22:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.161 (still bad) 2010-Mar-31 22:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.156 (still bad) 2010-Mar-31 22:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.156 (still bad) 2010-Mar-31 22:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.157 (still bad) 2010-Mar-31 22:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.154 (still bad) 2010-Mar-31 22:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.153 (still bad) 2010-Mar-31 22:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 22:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.153 (still bad) 2010-Mar-31 22:17:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 22:17:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.157 0.994 0.972 2010-Mar-31 22:17:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.124 1.107 0.975 2010-Mar-31 22:17:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.866 1.140 0.983 2010-Mar-31 22:17:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.889 0.998 1.032 2010-Mar-31 22:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.155 (still bad) 2010-Mar-31 22:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.154 (still bad) 2010-Mar-31 22:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.159 (still bad) 2010-Mar-31 22:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.153 (still bad) 2010-Mar-31 22:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.153 (still bad) 2010-Mar-31 22:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.155 (still bad) 2010-Mar-31 22:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.152 (still bad) 2010-Mar-31 22:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.155 (still bad) 2010-Mar-31 22:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.156 (still bad) 2010-Mar-31 22:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.160 (still bad) 2010-Mar-31 22:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 22:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 22:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.157 (still bad) 2010-Mar-31 22:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.165 (still bad) 2010-Mar-31 22:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.157 (still bad) 2010-Mar-31 22:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.157 (still bad) 2010-Mar-31 22:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 22:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.149 (still bad) 2010-Mar-31 22:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.152 (still bad) 2010-Mar-31 22:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.153 (still bad) 2010-Mar-31 22:18:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 22:18:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.152 0.993 0.969 2010-Mar-31 22:18:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.128 1.117 0.983 2010-Mar-31 22:18:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.865 1.140 0.988 2010-Mar-31 22:18:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.886 0.998 1.029 2010-Mar-31 22:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.154 (still bad) 2010-Mar-31 22:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.164 (still bad) 2010-Mar-31 22:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.181 (still bad) 2010-Mar-31 22:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.196 (still bad) 2010-Mar-31 22:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.202 (still bad) 2010-Mar-31 22:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.202 (still bad) 2010-Mar-31 22:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.202 (still bad) 2010-Mar-31 22:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.180 (still bad) 2010-Mar-31 22:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.162 (still bad) 2010-Mar-31 22:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.156 (still bad) 2010-Mar-31 22:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.153 (still bad) 2010-Mar-31 22:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.153 (still bad) 2010-Mar-31 22:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.160 (still bad) 2010-Mar-31 22:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.155 (still bad) 2010-Mar-31 22:19:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:19:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:19:08 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:19:08 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG1 fixed_driftmap: New position: year = 2010.2489526453214 RA = 10:56:00.0 RA/Dec = 10:56:35.1 +19:17:14.7 2010-Mar-31 22:19:08 NOTE fixed_driftmap: Correcting ZA to 6:28:07.7 ... 2010-Mar-31 22:19:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4688065449 -CF 2010-Mar-31 22:19:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:19:08 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:19:08 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:19:08 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:19:08 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:19:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:19:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:19:08 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:19:08 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4688065449 -CF 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:19:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:19:08 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:19:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:19:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:19:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:19:08 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Mar-31 22:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:19:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:19:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:19:09 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:19:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:19:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:19:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:19:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:19:09 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:19:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:19:09 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:19:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:19:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:19:09 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:19:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:19:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:19:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:19:09 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:19:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:19:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:19:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:19:09 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:19:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:19:09 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:19:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:19:09 INFO2 take_data: Starting WAPP 1-second scan: 9000095 2010-Mar-31 22:19:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:19:09 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Mar-31 22:19:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:19:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:19:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8350.00 2010-Mar-31 22:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.155 (still bad) 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:19:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:19:11 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:19:11 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:19:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:19:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:19:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:19:11 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:19:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:19:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:19:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:19:11 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:19:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:19:11 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:19:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:19:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:19:11 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Mar-31 22:19:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Mar-31 22:19:11 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Mar-31 22:19:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:19:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:19:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:19:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:19:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:19:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:19:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:19:12 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2010-Mar-31 22:19:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:19:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:19:12 INFO2 take_data: Starting WAPP 600-second scan: 9000096 2010-Mar-31 22:19:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:19:12 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Mar-31 22:19:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:19:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.814 and 1.581 2010-Mar-31 22:19:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:19:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:19:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0018.fits 2010-Mar-31 22:19:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8353.00 2010-Mar-31 22:19:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0018.fits} 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.656 < 0.75)! 2010-Mar-31 22:19:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.154 0.994 0.970 2010-Mar-31 22:19:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.656 1.125 1.105 0.974 2010-Mar-31 22:19:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.146 0.900 1.137 0.983 2010-Mar-31 22:19:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.888 0.999 1.030 2010-Mar-31 22:19:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.154 (still bad) 2010-Mar-31 22:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.153 (still bad) 2010-Mar-31 22:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.673 and 1.152 (still bad) 2010-Mar-31 22:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.153 (still bad) 2010-Mar-31 22:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.152 (still bad) 2010-Mar-31 22:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.153 (still bad) 2010-Mar-31 22:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.157 (still bad) 2010-Mar-31 22:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.163 (still bad) 2010-Mar-31 22:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.692 and 1.169 (still bad) 2010-Mar-31 22:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.177 (still bad) 2010-Mar-31 22:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.179 (still bad) 2010-Mar-31 22:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.177 (still bad) 2010-Mar-31 22:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.174 (still bad) 2010-Mar-31 22:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.168 (still bad) 2010-Mar-31 22:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.155 (still bad) 2010-Mar-31 22:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.156 (still bad) 2010-Mar-31 22:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.156 (still bad) 2010-Mar-31 22:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.158 (still bad) 2010-Mar-31 22:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.163 (still bad) 2010-Mar-31 22:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.160 (still bad) 2010-Mar-31 22:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.163 (still bad) 2010-Mar-31 22:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.164 (still bad) 2010-Mar-31 22:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.656 and 1.163 (still bad) 2010-Mar-31 22:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.165 (still bad) 2010-Mar-31 22:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.165 (still bad) 2010-Mar-31 22:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.162 (still bad) 2010-Mar-31 22:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.161 (still bad) 2010-Mar-31 22:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.158 (still bad) 2010-Mar-31 22:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.156 (still bad) 2010-Mar-31 22:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.157 (still bad) 2010-Mar-31 22:20:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.681 < 0.75)! 2010-Mar-31 22:20:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.155 0.996 0.973 2010-Mar-31 22:20:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.681 1.127 1.106 0.975 2010-Mar-31 22:20:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.864 1.138 0.984 2010-Mar-31 22:20:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.889 0.999 1.031 2010-Mar-31 22:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.156 (still bad) 2010-Mar-31 22:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.152 (still bad) 2010-Mar-31 22:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.154 (still bad) 2010-Mar-31 22:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.153 (still bad) 2010-Mar-31 22:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.152 (still bad) 2010-Mar-31 22:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.155 (still bad) 2010-Mar-31 22:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.155 (still bad) 2010-Mar-31 22:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.155 (still bad) 2010-Mar-31 22:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.155 (still bad) 2010-Mar-31 22:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.695 and 1.154 (still bad) 2010-Mar-31 22:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.155 (still bad) 2010-Mar-31 22:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.704 and 1.155 (still bad) 2010-Mar-31 22:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.155 (still bad) 2010-Mar-31 22:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.152 (still bad) 2010-Mar-31 22:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.155 (still bad) 2010-Mar-31 22:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.153 (still bad) 2010-Mar-31 22:20:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.759 and 1.154 2010-Mar-31 22:20:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.733 < 0.75)! 2010-Mar-31 22:20:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.160 1.003 0.980 2010-Mar-31 22:20:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.733 1.133 1.113 0.982 2010-Mar-31 22:20:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.872 1.144 0.989 2010-Mar-31 22:20:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.894 1.005 1.038 2010-Mar-31 22:20:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.155 2010-Mar-31 22:20:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Mar-31 22:20:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.153 0.995 0.971 2010-Mar-31 22:20:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.729 1.124 1.105 0.975 2010-Mar-31 22:20:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.865 1.133 0.980 2010-Mar-31 22:20:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.889 0.998 1.031 2010-Mar-31 22:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.158 (still bad) 2010-Mar-31 22:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.154 (still bad) 2010-Mar-31 22:21:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.761 and 1.155 2010-Mar-31 22:21:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.736 < 0.75)! 2010-Mar-31 22:21:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.153 0.995 0.972 2010-Mar-31 22:21:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.736 1.123 1.105 0.974 2010-Mar-31 22:21:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.865 1.134 0.980 2010-Mar-31 22:21:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.894 1.003 1.039 2010-Mar-31 22:21:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.818 and 1.156 2010-Mar-31 22:21:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.682 < 0.75)! 2010-Mar-31 22:21:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.153 0.994 0.971 2010-Mar-31 22:21:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.682 1.124 1.103 0.975 2010-Mar-31 22:21:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.867 1.136 0.980 2010-Mar-31 22:21:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.895 1.001 1.038 2010-Mar-31 22:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.153 (still bad) 2010-Mar-31 22:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.163 (still bad) 2010-Mar-31 22:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.153 (still bad) 2010-Mar-31 22:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.151 (still bad) 2010-Mar-31 22:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.154 (still bad) 2010-Mar-31 22:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.677 and 1.153 (still bad) 2010-Mar-31 22:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.652 and 1.155 (still bad) 2010-Mar-31 22:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.165 (still bad) 2010-Mar-31 22:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.635 and 1.155 (still bad) 2010-Mar-31 22:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.585 and 1.154 (still bad) 2010-Mar-31 22:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.155 (still bad) 2010-Mar-31 22:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.155 (still bad) 2010-Mar-31 22:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.156 (still bad) 2010-Mar-31 22:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.163 (still bad) 2010-Mar-31 22:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.601 and 1.155 (still bad) 2010-Mar-31 22:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.153 (still bad) 2010-Mar-31 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.154 (still bad) 2010-Mar-31 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.154 (still bad) 2010-Mar-31 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.165 (still bad) 2010-Mar-31 22:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.157 (still bad) 2010-Mar-31 22:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.156 (still bad) 2010-Mar-31 22:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.157 (still bad) 2010-Mar-31 22:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.155 (still bad) 2010-Mar-31 22:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.157 (still bad) 2010-Mar-31 22:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.162 (still bad) 2010-Mar-31 22:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.153 (still bad) 2010-Mar-31 22:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:22:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2010-Mar-31 22:22:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.154 0.994 0.971 2010-Mar-31 22:22:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.518 1.124 1.105 0.974 2010-Mar-31 22:22:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.868 1.137 0.981 2010-Mar-31 22:22:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.891 0.999 1.034 2010-Mar-31 22:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.154 (still bad) 2010-Mar-31 22:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 22:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.153 (still bad) 2010-Mar-31 22:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.151 (still bad) 2010-Mar-31 22:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.157 (still bad) 2010-Mar-31 22:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.153 (still bad) 2010-Mar-31 22:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.155 (still bad) 2010-Mar-31 22:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.165 (still bad) 2010-Mar-31 22:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.157 (still bad) 2010-Mar-31 22:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.156 (still bad) 2010-Mar-31 22:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.157 (still bad) 2010-Mar-31 22:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.156 (still bad) 2010-Mar-31 22:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.159 (still bad) 2010-Mar-31 22:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.158 (still bad) 2010-Mar-31 22:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.157 (still bad) 2010-Mar-31 22:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.153 (still bad) 2010-Mar-31 22:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.157 (still bad) 2010-Mar-31 22:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.156 (still bad) 2010-Mar-31 22:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.573 and 1.156 (still bad) 2010-Mar-31 22:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.156 (still bad) 2010-Mar-31 22:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.154 (still bad) 2010-Mar-31 22:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.155 (still bad) 2010-Mar-31 22:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.155 (still bad) 2010-Mar-31 22:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.153 (still bad) 2010-Mar-31 22:23:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.154 2010-Mar-31 22:23:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.600 < 0.75)! 2010-Mar-31 22:23:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.155 0.995 0.973 2010-Mar-31 22:23:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.600 1.127 1.109 0.976 2010-Mar-31 22:23:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.868 1.140 0.984 2010-Mar-31 22:23:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.890 0.998 1.032 2010-Mar-31 22:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.661 and 1.153 (still bad) 2010-Mar-31 22:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.153 (still bad) 2010-Mar-31 22:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.153 (still bad) 2010-Mar-31 22:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.150 (still bad) 2010-Mar-31 22:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.153 (still bad) 2010-Mar-31 22:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.151 (still bad) 2010-Mar-31 22:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.152 (still bad) 2010-Mar-31 22:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.155 (still bad) 2010-Mar-31 22:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.153 (still bad) 2010-Mar-31 22:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.153 (still bad) 2010-Mar-31 22:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.155 (still bad) 2010-Mar-31 22:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.154 (still bad) 2010-Mar-31 22:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.154 (still bad) 2010-Mar-31 22:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.154 (still bad) 2010-Mar-31 22:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.154 (still bad) 2010-Mar-31 22:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.154 (still bad) 2010-Mar-31 22:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.155 (still bad) 2010-Mar-31 22:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.154 (still bad) 2010-Mar-31 22:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.154 (still bad) 2010-Mar-31 22:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.154 (still bad) 2010-Mar-31 22:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.155 (still bad) 2010-Mar-31 22:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.158 (still bad) 2010-Mar-31 22:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.156 (still bad) 2010-Mar-31 22:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.152 (still bad) 2010-Mar-31 22:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.156 (still bad) 2010-Mar-31 22:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 22:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 22:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.150 (still bad) 2010-Mar-31 22:24:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.75)! 2010-Mar-31 22:24:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.153 0.993 0.971 2010-Mar-31 22:24:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.525 1.126 1.108 0.976 2010-Mar-31 22:24:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.867 1.133 0.981 2010-Mar-31 22:24:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.890 0.999 1.032 2010-Mar-31 22:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 22:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.155 (still bad) 2010-Mar-31 22:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.151 (still bad) 2010-Mar-31 22:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.155 (still bad) 2010-Mar-31 22:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.152 (still bad) 2010-Mar-31 22:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.152 (still bad) 2010-Mar-31 22:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.160 (still bad) 2010-Mar-31 22:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.154 (still bad) 2010-Mar-31 22:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.151 (still bad) 2010-Mar-31 22:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.156 (still bad) 2010-Mar-31 22:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.151 (still bad) 2010-Mar-31 22:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.155 (still bad) 2010-Mar-31 22:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.163 (still bad) 2010-Mar-31 22:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.603 and 1.154 (still bad) 2010-Mar-31 22:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.154 (still bad) 2010-Mar-31 22:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.682 and 1.158 (still bad) 2010-Mar-31 22:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.710 and 1.158 (still bad) 2010-Mar-31 22:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.165 (still bad) 2010-Mar-31 22:24:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.770 and 1.164 2010-Mar-31 22:25:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.606 < 0.75)! 2010-Mar-31 22:25:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.153 0.998 0.974 2010-Mar-31 22:25:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.606 1.135 1.105 0.974 2010-Mar-31 22:25:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.866 1.134 0.981 2010-Mar-31 22:25:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.890 0.998 1.033 2010-Mar-31 22:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.151 (still bad) 2010-Mar-31 22:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.160 (still bad) 2010-Mar-31 22:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.153 (still bad) 2010-Mar-31 22:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.154 (still bad) 2010-Mar-31 22:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.158 (still bad) 2010-Mar-31 22:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.156 (still bad) 2010-Mar-31 22:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.161 (still bad) 2010-Mar-31 22:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.167 (still bad) 2010-Mar-31 22:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.158 (still bad) 2010-Mar-31 22:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.154 (still bad) 2010-Mar-31 22:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.156 (still bad) 2010-Mar-31 22:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.154 (still bad) 2010-Mar-31 22:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.153 (still bad) 2010-Mar-31 22:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.162 (still bad) 2010-Mar-31 22:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.156 (still bad) 2010-Mar-31 22:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.153 (still bad) 2010-Mar-31 22:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.158 (still bad) 2010-Mar-31 22:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.154 (still bad) 2010-Mar-31 22:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.156 (still bad) 2010-Mar-31 22:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.162 (still bad) 2010-Mar-31 22:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.155 (still bad) 2010-Mar-31 22:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.154 (still bad) 2010-Mar-31 22:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.153 (still bad) 2010-Mar-31 22:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.151 (still bad) 2010-Mar-31 22:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.155 (still bad) 2010-Mar-31 22:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.154 (still bad) 2010-Mar-31 22:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.153 (still bad) 2010-Mar-31 22:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.153 (still bad) 2010-Mar-31 22:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.155 (still bad) 2010-Mar-31 22:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.153 (still bad) 2010-Mar-31 22:26:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2010-Mar-31 22:26:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.155 1.011 0.989 2010-Mar-31 22:26:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.518 1.127 1.106 0.975 2010-Mar-31 22:26:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.867 1.138 0.983 2010-Mar-31 22:26:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.893 1.003 1.037 2010-Mar-31 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 22:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.157 (still bad) 2010-Mar-31 22:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.152 (still bad) 2010-Mar-31 22:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.155 (still bad) 2010-Mar-31 22:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.154 (still bad) 2010-Mar-31 22:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.151 (still bad) 2010-Mar-31 22:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.155 (still bad) 2010-Mar-31 22:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.153 (still bad) 2010-Mar-31 22:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.154 (still bad) 2010-Mar-31 22:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.153 (still bad) 2010-Mar-31 22:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.151 (still bad) 2010-Mar-31 22:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.154 (still bad) 2010-Mar-31 22:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.152 (still bad) 2010-Mar-31 22:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.153 (still bad) 2010-Mar-31 22:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.159 (still bad) 2010-Mar-31 22:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.153 (still bad) 2010-Mar-31 22:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.151 (still bad) 2010-Mar-31 22:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.153 (still bad) 2010-Mar-31 22:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.162 (still bad) 2010-Mar-31 22:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.154 (still bad) 2010-Mar-31 22:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.154 (still bad) 2010-Mar-31 22:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 22:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.154 (still bad) 2010-Mar-31 22:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.155 (still bad) 2010-Mar-31 22:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 22:27:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 22:27:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.156 1.007 0.984 2010-Mar-31 22:27:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.129 1.107 0.975 2010-Mar-31 22:27:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.866 1.136 0.982 2010-Mar-31 22:27:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.891 1.001 1.035 2010-Mar-31 22:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.153 (still bad) 2010-Mar-31 22:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.156 (still bad) 2010-Mar-31 22:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.153 (still bad) 2010-Mar-31 22:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 22:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.156 (still bad) 2010-Mar-31 22:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.153 (still bad) 2010-Mar-31 22:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.154 (still bad) 2010-Mar-31 22:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.156 (still bad) 2010-Mar-31 22:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.154 (still bad) 2010-Mar-31 22:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.155 (still bad) 2010-Mar-31 22:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.155 (still bad) 2010-Mar-31 22:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.153 (still bad) 2010-Mar-31 22:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.155 (still bad) 2010-Mar-31 22:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.155 (still bad) 2010-Mar-31 22:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.155 (still bad) 2010-Mar-31 22:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.159 (still bad) 2010-Mar-31 22:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.155 (still bad) 2010-Mar-31 22:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.156 (still bad) 2010-Mar-31 22:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.156 (still bad) 2010-Mar-31 22:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.156 (still bad) 2010-Mar-31 22:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.156 (still bad) 2010-Mar-31 22:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.158 (still bad) 2010-Mar-31 22:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.153 (still bad) 2010-Mar-31 22:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.154 (still bad) 2010-Mar-31 22:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.156 (still bad) 2010-Mar-31 22:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.159 (still bad) 2010-Mar-31 22:28:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 22:28:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.153 1.000 0.975 2010-Mar-31 22:28:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.124 1.105 0.976 2010-Mar-31 22:28:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.869 1.143 0.983 2010-Mar-31 22:28:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.891 1.000 1.034 2010-Mar-31 22:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.155 (still bad) 2010-Mar-31 22:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.158 (still bad) 2010-Mar-31 22:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.155 (still bad) 2010-Mar-31 22:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.157 (still bad) 2010-Mar-31 22:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.156 (still bad) 2010-Mar-31 22:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.154 (still bad) 2010-Mar-31 22:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.157 (still bad) 2010-Mar-31 22:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.154 (still bad) 2010-Mar-31 22:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.157 (still bad) 2010-Mar-31 22:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.159 (still bad) 2010-Mar-31 22:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.153 (still bad) 2010-Mar-31 22:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.154 (still bad) 2010-Mar-31 22:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.154 (still bad) 2010-Mar-31 22:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 22:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.154 (still bad) 2010-Mar-31 22:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.153 (still bad) 2010-Mar-31 22:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.155 (still bad) 2010-Mar-31 22:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.152 (still bad) 2010-Mar-31 22:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.153 (still bad) 2010-Mar-31 22:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.158 (still bad) 2010-Mar-31 22:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.153 (still bad) 2010-Mar-31 22:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.153 (still bad) 2010-Mar-31 22:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.154 (still bad) 2010-Mar-31 22:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.155 (still bad) 2010-Mar-31 22:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.155 (still bad) 2010-Mar-31 22:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.160 (still bad) 2010-Mar-31 22:29:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.506 < 0.75)! 2010-Mar-31 22:29:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.156 0.996 0.973 2010-Mar-31 22:29:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.506 1.128 1.105 0.975 2010-Mar-31 22:29:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.868 1.138 0.981 2010-Mar-31 22:29:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.892 0.998 1.036 2010-Mar-31 22:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.158 (still bad) 2010-Mar-31 22:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.156 (still bad) 2010-Mar-31 22:29:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:29:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:29:13 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:29:13 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG1 fixed_driftmap: New position: year = 2010.2489718166146 RA = 11:06:05.1 RA/Dec = 11:06:40.0 +19:17:11.9 2010-Mar-31 22:29:13 NOTE fixed_driftmap: Correcting ZA to 6:27:45.8 ... 2010-Mar-31 22:29:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4627299091 -CF 2010-Mar-31 22:29:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:29:13 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:29:13 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:29:13 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:29:13 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:29:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:29:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:29:13 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:29:13 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4627299091 -CF 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:29:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:29:13 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:29:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:29:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:29:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:29:13 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Mar-31 22:29:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:29:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:29:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:29:14 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:29:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:29:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:29:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:29:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:29:14 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:29:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:29:14 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:29:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:29:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:29:14 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:29:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:29:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:29:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:29:14 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:29:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:29:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:29:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:29:14 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:29:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:29:14 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:29:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:29:14 INFO2 take_data: Starting WAPP 1-second scan: 9000097 2010-Mar-31 22:29:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:29:14 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Mar-31 22:29:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:29:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:29:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8955.00 2010-Mar-31 22:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.156 (still bad) 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:29:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:29:16 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:29:16 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:29:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:29:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:29:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:29:16 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:29:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:29:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:29:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:29:16 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:29:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:29:16 LOG5 finish_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:29:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:29:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:29:16 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Mar-31 22:29:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Mar-31 22:29:16 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Mar-31 22:29:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:29:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:29:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:29:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:29:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:29:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:29:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:29:17 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2010-Mar-31 22:29:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:29:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:29:17 INFO2 take_data: Starting WAPP 600-second scan: 9000098 2010-Mar-31 22:29:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:29:17 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Mar-31 22:29:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:29:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.583 (still bad) 2010-Mar-31 22:29:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:29:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8958.00 2010-Mar-31 22:29:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0019.fits 2010-Mar-31 22:29:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0019.fits} 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.558 (still bad) 2010-Mar-31 22:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.156 (still bad) 2010-Mar-31 22:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.156 (still bad) 2010-Mar-31 22:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.153 (still bad) 2010-Mar-31 22:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.156 (still bad) 2010-Mar-31 22:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.157 (still bad) 2010-Mar-31 22:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.156 (still bad) 2010-Mar-31 22:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.158 (still bad) 2010-Mar-31 22:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.155 (still bad) 2010-Mar-31 22:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.159 (still bad) 2010-Mar-31 22:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.157 (still bad) 2010-Mar-31 22:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.157 (still bad) 2010-Mar-31 22:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.156 (still bad) 2010-Mar-31 22:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.159 (still bad) 2010-Mar-31 22:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.161 (still bad) 2010-Mar-31 22:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.158 (still bad) 2010-Mar-31 22:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.155 (still bad) 2010-Mar-31 22:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.158 (still bad) 2010-Mar-31 22:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.155 (still bad) 2010-Mar-31 22:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.157 (still bad) 2010-Mar-31 22:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.160 (still bad) 2010-Mar-31 22:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.160 (still bad) 2010-Mar-31 22:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.154 (still bad) 2010-Mar-31 22:30:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Mar-31 22:30:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.156 1.002 0.976 2010-Mar-31 22:30:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.127 1.114 0.981 2010-Mar-31 22:30:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.869 1.139 0.982 2010-Mar-31 22:30:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.890 1.000 1.032 2010-Mar-31 22:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.156 (still bad) 2010-Mar-31 22:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.155 (still bad) 2010-Mar-31 22:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 22:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.157 (still bad) 2010-Mar-31 22:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.154 (still bad) 2010-Mar-31 22:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.159 (still bad) 2010-Mar-31 22:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.154 (still bad) 2010-Mar-31 22:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.157 (still bad) 2010-Mar-31 22:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.158 (still bad) 2010-Mar-31 22:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.158 (still bad) 2010-Mar-31 22:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.157 (still bad) 2010-Mar-31 22:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 22:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.153 (still bad) 2010-Mar-31 22:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.155 (still bad) 2010-Mar-31 22:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.159 (still bad) 2010-Mar-31 22:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.157 (still bad) 2010-Mar-31 22:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.157 (still bad) 2010-Mar-31 22:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 22:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.156 (still bad) 2010-Mar-31 22:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.155 (still bad) 2010-Mar-31 22:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.164 (still bad) 2010-Mar-31 22:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.155 (still bad) 2010-Mar-31 22:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.156 (still bad) 2010-Mar-31 22:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.157 (still bad) 2010-Mar-31 22:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.154 (still bad) 2010-Mar-31 22:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.155 (still bad) 2010-Mar-31 22:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.165 (still bad) 2010-Mar-31 22:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.155 (still bad) 2010-Mar-31 22:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.153 (still bad) 2010-Mar-31 22:31:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 22:31:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.156 0.999 0.975 2010-Mar-31 22:31:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.132 1.110 0.979 2010-Mar-31 22:31:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.870 1.143 0.988 2010-Mar-31 22:31:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.892 1.000 1.037 2010-Mar-31 22:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.154 (still bad) 2010-Mar-31 22:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.159 (still bad) 2010-Mar-31 22:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.164 (still bad) 2010-Mar-31 22:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.155 (still bad) 2010-Mar-31 22:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.156 (still bad) 2010-Mar-31 22:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.158 (still bad) 2010-Mar-31 22:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.153 (still bad) 2010-Mar-31 22:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.156 (still bad) 2010-Mar-31 22:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.163 (still bad) 2010-Mar-31 22:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.156 (still bad) 2010-Mar-31 22:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.154 (still bad) 2010-Mar-31 22:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.156 (still bad) 2010-Mar-31 22:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.156 (still bad) 2010-Mar-31 22:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.156 (still bad) 2010-Mar-31 22:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.163 (still bad) 2010-Mar-31 22:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.158 (still bad) 2010-Mar-31 22:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.157 (still bad) 2010-Mar-31 22:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.159 (still bad) 2010-Mar-31 22:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.156 (still bad) 2010-Mar-31 22:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.163 (still bad) 2010-Mar-31 22:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 22:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.163 (still bad) 2010-Mar-31 22:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.161 (still bad) 2010-Mar-31 22:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.164 (still bad) 2010-Mar-31 22:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.160 (still bad) 2010-Mar-31 22:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.163 (still bad) 2010-Mar-31 22:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Mar-31 22:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.161 (still bad) 2010-Mar-31 22:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.158 (still bad) 2010-Mar-31 22:32:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Mar-31 22:32:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.159 0.998 0.972 2010-Mar-31 22:32:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.126 1.110 0.980 2010-Mar-31 22:32:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.871 1.138 0.984 2010-Mar-31 22:32:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.893 1.001 1.038 2010-Mar-31 22:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 22:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.160 (still bad) 2010-Mar-31 22:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.167 (still bad) 2010-Mar-31 22:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.159 (still bad) 2010-Mar-31 22:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.159 (still bad) 2010-Mar-31 22:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.161 (still bad) 2010-Mar-31 22:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.158 (still bad) 2010-Mar-31 22:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.160 (still bad) 2010-Mar-31 22:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.162 (still bad) 2010-Mar-31 22:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.159 (still bad) 2010-Mar-31 22:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.156 (still bad) 2010-Mar-31 22:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.159 (still bad) 2010-Mar-31 22:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.159 (still bad) 2010-Mar-31 22:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.158 (still bad) 2010-Mar-31 22:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.157 (still bad) 2010-Mar-31 22:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.157 (still bad) 2010-Mar-31 22:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 22:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.157 (still bad) 2010-Mar-31 22:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 22:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.157 (still bad) 2010-Mar-31 22:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.159 (still bad) 2010-Mar-31 22:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.160 (still bad) 2010-Mar-31 22:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 22:33:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.533 < 0.75)! 2010-Mar-31 22:33:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.158 1.002 0.977 2010-Mar-31 22:33:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.533 1.124 1.109 0.978 2010-Mar-31 22:33:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.870 1.138 0.983 2010-Mar-31 22:33:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.892 1.001 1.036 2010-Mar-31 22:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.162 (still bad) 2010-Mar-31 22:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.162 (still bad) 2010-Mar-31 22:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 22:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.161 (still bad) 2010-Mar-31 22:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.160 (still bad) 2010-Mar-31 22:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.158 (still bad) 2010-Mar-31 22:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.161 (still bad) 2010-Mar-31 22:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 22:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 22:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.163 (still bad) 2010-Mar-31 22:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.162 (still bad) 2010-Mar-31 22:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.161 (still bad) 2010-Mar-31 22:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.162 (still bad) 2010-Mar-31 22:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.162 (still bad) 2010-Mar-31 22:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.161 (still bad) 2010-Mar-31 22:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.159 (still bad) 2010-Mar-31 22:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.162 (still bad) 2010-Mar-31 22:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.160 (still bad) 2010-Mar-31 22:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.162 (still bad) 2010-Mar-31 22:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.158 (still bad) 2010-Mar-31 22:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.157 (still bad) 2010-Mar-31 22:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.158 (still bad) 2010-Mar-31 22:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.160 (still bad) 2010-Mar-31 22:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 22:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 22:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.157 (still bad) 2010-Mar-31 22:34:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 22:34:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.156 0.998 0.973 2010-Mar-31 22:34:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.128 1.109 0.979 2010-Mar-31 22:34:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.870 1.140 0.986 2010-Mar-31 22:34:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.893 1.002 1.037 2010-Mar-31 22:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.161 (still bad) 2010-Mar-31 22:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.158 (still bad) 2010-Mar-31 22:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.155 (still bad) 2010-Mar-31 22:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.157 (still bad) 2010-Mar-31 22:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.158 (still bad) 2010-Mar-31 22:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 22:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.161 (still bad) 2010-Mar-31 22:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.160 (still bad) 2010-Mar-31 22:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 22:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.157 (still bad) 2010-Mar-31 22:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.163 (still bad) 2010-Mar-31 22:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.159 (still bad) 2010-Mar-31 22:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.159 (still bad) 2010-Mar-31 22:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 22:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.157 (still bad) 2010-Mar-31 22:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.165 (still bad) 2010-Mar-31 22:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.157 (still bad) 2010-Mar-31 22:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.156 (still bad) 2010-Mar-31 22:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.158 (still bad) 2010-Mar-31 22:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.157 (still bad) 2010-Mar-31 22:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.159 (still bad) 2010-Mar-31 22:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.161 (still bad) 2010-Mar-31 22:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.157 (still bad) 2010-Mar-31 22:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.154 (still bad) 2010-Mar-31 22:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.153 (still bad) 2010-Mar-31 22:35:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2010-Mar-31 22:35:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.156 1.000 0.974 2010-Mar-31 22:35:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.515 1.127 1.109 0.978 2010-Mar-31 22:35:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.869 1.138 0.983 2010-Mar-31 22:35:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.891 1.003 1.035 2010-Mar-31 22:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 22:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.153 (still bad) 2010-Mar-31 22:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.154 (still bad) 2010-Mar-31 22:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.161 (still bad) 2010-Mar-31 22:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.157 (still bad) 2010-Mar-31 22:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.156 (still bad) 2010-Mar-31 22:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.159 (still bad) 2010-Mar-31 22:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.154 (still bad) 2010-Mar-31 22:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.156 (still bad) 2010-Mar-31 22:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 22:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.155 (still bad) 2010-Mar-31 22:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.156 (still bad) 2010-Mar-31 22:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.157 (still bad) 2010-Mar-31 22:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.156 (still bad) 2010-Mar-31 22:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.156 (still bad) 2010-Mar-31 22:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.160 (still bad) 2010-Mar-31 22:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.153 (still bad) 2010-Mar-31 22:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.155 (still bad) 2010-Mar-31 22:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.157 (still bad) 2010-Mar-31 22:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.156 (still bad) 2010-Mar-31 22:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.156 (still bad) 2010-Mar-31 22:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.160 (still bad) 2010-Mar-31 22:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.156 (still bad) 2010-Mar-31 22:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.154 (still bad) 2010-Mar-31 22:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.157 (still bad) 2010-Mar-31 22:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.155 (still bad) 2010-Mar-31 22:36:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 22:36:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.155 1.001 0.973 2010-Mar-31 22:36:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.126 1.111 0.976 2010-Mar-31 22:36:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.870 1.138 0.984 2010-Mar-31 22:36:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.892 1.003 1.035 2010-Mar-31 22:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.162 (still bad) 2010-Mar-31 22:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.155 (still bad) 2010-Mar-31 22:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.154 (still bad) 2010-Mar-31 22:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.153 (still bad) 2010-Mar-31 22:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.153 (still bad) 2010-Mar-31 22:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.156 (still bad) 2010-Mar-31 22:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.159 (still bad) 2010-Mar-31 22:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.156 (still bad) 2010-Mar-31 22:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.155 (still bad) 2010-Mar-31 22:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.158 (still bad) 2010-Mar-31 22:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.155 (still bad) 2010-Mar-31 22:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.606 and 1.156 (still bad) 2010-Mar-31 22:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.159 (still bad) 2010-Mar-31 22:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.157 (still bad) 2010-Mar-31 22:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.157 (still bad) 2010-Mar-31 22:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.157 (still bad) 2010-Mar-31 22:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.157 (still bad) 2010-Mar-31 22:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.156 (still bad) 2010-Mar-31 22:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.161 (still bad) 2010-Mar-31 22:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.156 (still bad) 2010-Mar-31 22:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.157 (still bad) 2010-Mar-31 22:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.159 (still bad) 2010-Mar-31 22:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.158 (still bad) 2010-Mar-31 22:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.159 (still bad) 2010-Mar-31 22:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.162 (still bad) 2010-Mar-31 22:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.157 (still bad) 2010-Mar-31 22:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.156 (still bad) 2010-Mar-31 22:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.159 (still bad) 2010-Mar-31 22:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.156 (still bad) 2010-Mar-31 22:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.156 (still bad) 2010-Mar-31 22:37:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.537 < 0.75)! 2010-Mar-31 22:37:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.162 1.002 0.975 2010-Mar-31 22:37:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.537 1.130 1.116 0.980 2010-Mar-31 22:37:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.872 1.143 0.985 2010-Mar-31 22:37:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.893 1.004 1.036 2010-Mar-31 22:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.157 (still bad) 2010-Mar-31 22:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.155 (still bad) 2010-Mar-31 22:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.157 (still bad) 2010-Mar-31 22:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.155 (still bad) 2010-Mar-31 22:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.156 (still bad) 2010-Mar-31 22:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.156 (still bad) 2010-Mar-31 22:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.159 (still bad) 2010-Mar-31 22:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.156 (still bad) 2010-Mar-31 22:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.161 (still bad) 2010-Mar-31 22:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.158 (still bad) 2010-Mar-31 22:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.160 (still bad) 2010-Mar-31 22:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.158 (still bad) 2010-Mar-31 22:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.164 (still bad) 2010-Mar-31 22:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.161 (still bad) 2010-Mar-31 22:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.161 (still bad) 2010-Mar-31 22:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.161 (still bad) 2010-Mar-31 22:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.161 (still bad) 2010-Mar-31 22:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.160 (still bad) 2010-Mar-31 22:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.167 (still bad) 2010-Mar-31 22:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.158 (still bad) 2010-Mar-31 22:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.158 (still bad) 2010-Mar-31 22:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.159 (still bad) 2010-Mar-31 22:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.157 (still bad) 2010-Mar-31 22:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.158 (still bad) 2010-Mar-31 22:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.164 (still bad) 2010-Mar-31 22:38:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 22:38:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.156 0.998 0.975 2010-Mar-31 22:38:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.125 1.112 0.978 2010-Mar-31 22:38:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.870 1.143 0.985 2010-Mar-31 22:38:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.895 1.005 1.038 2010-Mar-31 22:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.156 (still bad) 2010-Mar-31 22:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.160 (still bad) 2010-Mar-31 22:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.157 (still bad) 2010-Mar-31 22:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.159 (still bad) 2010-Mar-31 22:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.164 (still bad) 2010-Mar-31 22:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.158 (still bad) 2010-Mar-31 22:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.155 (still bad) 2010-Mar-31 22:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.157 (still bad) 2010-Mar-31 22:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.156 (still bad) 2010-Mar-31 22:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.157 (still bad) 2010-Mar-31 22:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.669 and 1.162 (still bad) 2010-Mar-31 22:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.156 (still bad) 2010-Mar-31 22:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.154 (still bad) 2010-Mar-31 22:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.159 (still bad) 2010-Mar-31 22:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.603 and 1.156 (still bad) 2010-Mar-31 22:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.156 (still bad) 2010-Mar-31 22:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.159 (still bad) 2010-Mar-31 22:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.160 (still bad) 2010-Mar-31 22:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.157 (still bad) 2010-Mar-31 22:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.160 (still bad) 2010-Mar-31 22:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.155 (still bad) 2010-Mar-31 22:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.157 (still bad) 2010-Mar-31 22:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.160 (still bad) 2010-Mar-31 22:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.156 (still bad) 2010-Mar-31 22:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.158 (still bad) 2010-Mar-31 22:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.565 and 1.157 (still bad) 2010-Mar-31 22:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.159 (still bad) 2010-Mar-31 22:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.160 (still bad) 2010-Mar-31 22:39:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:39:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:39:18 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:39:18 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG1 fixed_driftmap: New position: year = 2010.2489909879077 RA = 11:16:10.4 RA/Dec = 11:16:45.1 +19:17:09.6 2010-Mar-31 22:39:18 NOTE fixed_driftmap: Correcting ZA to 6:27:27.1 ... 2010-Mar-31 22:39:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4575222066 -CF 2010-Mar-31 22:39:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:39:18 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:39:18 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:39:18 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:39:18 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:39:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:39:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:39:18 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:39:18 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4575222066 -CF 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:39:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:39:18 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:39:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:39:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:39:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:39:18 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Mar-31 22:39:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:39:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:39:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:39:19 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:39:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:39:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:39:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:39:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:39:19 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:39:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:39:19 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:39:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:39:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:39:19 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:39:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:39:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:39:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:39:19 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:39:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:39:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:39:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:39:19 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:39:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:39:19 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:39:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:39:19 INFO2 take_data: Starting WAPP 1-second scan: 9000099 2010-Mar-31 22:39:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:39:19 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Mar-31 22:39:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:39:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:39:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9560.00 2010-Mar-31 22:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.160 (still bad) 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:39:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:39:21 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:39:21 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:39:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:39:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:39:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:39:21 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:39:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:39:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:39:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:39:21 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:39:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:39:21 LOG5 finish_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:39:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:39:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:39:21 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Mar-31 22:39:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2010-Mar-31 22:39:21 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2010-Mar-31 22:39:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:39:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:39:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:39:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:39:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:39:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:39:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:39:22 LOG5 begin_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2010-Mar-31 22:39:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:39:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:39:22 INFO2 take_data: Starting WAPP 600-second scan: 9000100 2010-Mar-31 22:39:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:39:22 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Mar-31 22:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:39:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.703 < 0.75)! 2010-Mar-31 22:39:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.297 1.588 1.367 1.330 2010-Mar-31 22:39:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.703 1.562 1.550 1.344 2010-Mar-31 22:39:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.537 1.208 1.558 1.294 2010-Mar-31 22:39:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.285 1.210 1.383 1.406 2010-Mar-31 22:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:39:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:39:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9563.00 2010-Mar-31 22:39:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0020.fits 2010-Mar-31 22:39:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0020.fits} 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.558 (still bad) 2010-Mar-31 22:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.157 (still bad) 2010-Mar-31 22:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.158 (still bad) 2010-Mar-31 22:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.158 (still bad) 2010-Mar-31 22:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.159 (still bad) 2010-Mar-31 22:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.155 (still bad) 2010-Mar-31 22:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.160 (still bad) 2010-Mar-31 22:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.157 (still bad) 2010-Mar-31 22:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.155 (still bad) 2010-Mar-31 22:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.160 (still bad) 2010-Mar-31 22:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.155 (still bad) 2010-Mar-31 22:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.158 (still bad) 2010-Mar-31 22:39:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.774 and 1.158 2010-Mar-31 22:39:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.725 < 0.75)! 2010-Mar-31 22:39:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.162 1.004 0.978 2010-Mar-31 22:39:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.725 1.129 1.113 0.978 2010-Mar-31 22:39:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.870 1.143 0.984 2010-Mar-31 22:39:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.891 1.001 1.033 2010-Mar-31 22:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.164 (still bad) 2010-Mar-31 22:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.159 (still bad) 2010-Mar-31 22:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.162 (still bad) 2010-Mar-31 22:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.159 (still bad) 2010-Mar-31 22:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.160 (still bad) 2010-Mar-31 22:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.162 (still bad) 2010-Mar-31 22:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.161 (still bad) 2010-Mar-31 22:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.158 (still bad) 2010-Mar-31 22:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.159 (still bad) 2010-Mar-31 22:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.616 and 1.158 (still bad) 2010-Mar-31 22:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.160 (still bad) 2010-Mar-31 22:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.160 (still bad) 2010-Mar-31 22:40:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.813 and 1.162 2010-Mar-31 22:40:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.663 < 0.75)! 2010-Mar-31 22:40:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.158 1.002 0.976 2010-Mar-31 22:40:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.663 1.128 1.112 0.977 2010-Mar-31 22:40:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.875 1.142 0.985 2010-Mar-31 22:40:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.891 1.004 1.034 2010-Mar-31 22:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.161 (still bad) 2010-Mar-31 22:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.157 (still bad) 2010-Mar-31 22:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.158 (still bad) 2010-Mar-31 22:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.158 (still bad) 2010-Mar-31 22:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.159 (still bad) 2010-Mar-31 22:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.161 (still bad) 2010-Mar-31 22:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.161 (still bad) 2010-Mar-31 22:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.159 (still bad) 2010-Mar-31 22:40:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.753 and 1.160 2010-Mar-31 22:40:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.617 < 0.75)! 2010-Mar-31 22:40:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.168 1.005 0.979 2010-Mar-31 22:40:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.617 1.139 1.118 0.983 2010-Mar-31 22:40:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.875 1.148 0.991 2010-Mar-31 22:40:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.901 1.013 1.046 2010-Mar-31 22:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.158 (still bad) 2010-Mar-31 22:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.158 (still bad) 2010-Mar-31 22:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.163 (still bad) 2010-Mar-31 22:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.158 (still bad) 2010-Mar-31 22:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.159 (still bad) 2010-Mar-31 22:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.167 (still bad) 2010-Mar-31 22:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.160 (still bad) 2010-Mar-31 22:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.160 (still bad) 2010-Mar-31 22:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.162 (still bad) 2010-Mar-31 22:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.159 (still bad) 2010-Mar-31 22:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.159 (still bad) 2010-Mar-31 22:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.167 (still bad) 2010-Mar-31 22:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.162 (still bad) 2010-Mar-31 22:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.159 (still bad) 2010-Mar-31 22:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.161 (still bad) 2010-Mar-31 22:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 22:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.159 (still bad) 2010-Mar-31 22:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.165 (still bad) 2010-Mar-31 22:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.160 (still bad) 2010-Mar-31 22:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.584 and 1.158 (still bad) 2010-Mar-31 22:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.163 (still bad) 2010-Mar-31 22:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.161 (still bad) 2010-Mar-31 22:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.161 (still bad) 2010-Mar-31 22:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.170 (still bad) 2010-Mar-31 22:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.159 (still bad) 2010-Mar-31 22:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.160 (still bad) 2010-Mar-31 22:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 22:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.161 (still bad) 2010-Mar-31 22:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.164 (still bad) 2010-Mar-31 22:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.174 (still bad) 2010-Mar-31 22:41:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 22:41:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.166 1.003 0.975 2010-Mar-31 22:41:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.126 1.115 0.977 2010-Mar-31 22:41:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.872 1.140 0.984 2010-Mar-31 22:41:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.892 1.003 1.036 2010-Mar-31 22:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.166 (still bad) 2010-Mar-31 22:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.168 (still bad) 2010-Mar-31 22:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.166 (still bad) 2010-Mar-31 22:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.165 (still bad) 2010-Mar-31 22:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 22:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.162 (still bad) 2010-Mar-31 22:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.160 (still bad) 2010-Mar-31 22:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.165 (still bad) 2010-Mar-31 22:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.158 (still bad) 2010-Mar-31 22:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.161 (still bad) 2010-Mar-31 22:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.165 (still bad) 2010-Mar-31 22:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.159 (still bad) 2010-Mar-31 22:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.157 (still bad) 2010-Mar-31 22:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.162 (still bad) 2010-Mar-31 22:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.160 (still bad) 2010-Mar-31 22:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 22:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.161 (still bad) 2010-Mar-31 22:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.160 (still bad) 2010-Mar-31 22:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 22:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 22:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 22:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.161 (still bad) 2010-Mar-31 22:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 22:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 22:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.162 (still bad) 2010-Mar-31 22:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.163 (still bad) 2010-Mar-31 22:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.159 (still bad) 2010-Mar-31 22:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.531 < 0.75)! 2010-Mar-31 22:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.160 1.001 0.972 2010-Mar-31 22:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.531 1.137 1.118 0.980 2010-Mar-31 22:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.871 1.143 0.985 2010-Mar-31 22:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.889 1.005 1.033 2010-Mar-31 22:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.161 (still bad) 2010-Mar-31 22:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.163 (still bad) 2010-Mar-31 22:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.161 (still bad) 2010-Mar-31 22:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.162 (still bad) 2010-Mar-31 22:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.162 (still bad) 2010-Mar-31 22:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.159 (still bad) 2010-Mar-31 22:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.163 (still bad) 2010-Mar-31 22:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.161 (still bad) 2010-Mar-31 22:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.162 (still bad) 2010-Mar-31 22:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.164 (still bad) 2010-Mar-31 22:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.164 (still bad) 2010-Mar-31 22:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 22:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.167 (still bad) 2010-Mar-31 22:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.174 (still bad) 2010-Mar-31 22:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.185 (still bad) 2010-Mar-31 22:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.189 (still bad) 2010-Mar-31 22:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.185 (still bad) 2010-Mar-31 22:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.175 (still bad) 2010-Mar-31 22:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 22:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.167 (still bad) 2010-Mar-31 22:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.180 (still bad) 2010-Mar-31 22:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.195 (still bad) 2010-Mar-31 22:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.203 (still bad) 2010-Mar-31 22:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.217 (still bad) 2010-Mar-31 22:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.224 (still bad) 2010-Mar-31 22:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.225 (still bad) 2010-Mar-31 22:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.222 (still bad) 2010-Mar-31 22:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.210 (still bad) 2010-Mar-31 22:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.194 (still bad) 2010-Mar-31 22:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 22:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 1.186 1.005 0.972 2010-Mar-31 22:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.127 1.118 0.978 2010-Mar-31 22:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.876 1.148 0.991 2010-Mar-31 22:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.890 1.007 1.035 2010-Mar-31 22:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.171 (still bad) 2010-Mar-31 22:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Mar-31 22:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.200 (still bad) 2010-Mar-31 22:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.217 (still bad) 2010-Mar-31 22:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.245 (still bad) 2010-Mar-31 22:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.269 (still bad) 2010-Mar-31 22:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.285 (still bad) 2010-Mar-31 22:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.291 (still bad) 2010-Mar-31 22:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.290 (still bad) 2010-Mar-31 22:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.262 (still bad) 2010-Mar-31 22:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.235 (still bad) 2010-Mar-31 22:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.210 (still bad) 2010-Mar-31 22:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.184 (still bad) 2010-Mar-31 22:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.166 (still bad) 2010-Mar-31 22:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 22:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 22:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.163 (still bad) 2010-Mar-31 22:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.161 (still bad) 2010-Mar-31 22:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.161 (still bad) 2010-Mar-31 22:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.167 (still bad) 2010-Mar-31 22:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 22:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 22:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 22:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.161 (still bad) 2010-Mar-31 22:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 22:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.173 (still bad) 2010-Mar-31 22:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.166 (still bad) 2010-Mar-31 22:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 22:45:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.520 < 0.75)! 2010-Mar-31 22:45:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.163 1.004 0.975 2010-Mar-31 22:45:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.520 1.134 1.118 0.980 2010-Mar-31 22:45:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.873 1.144 0.987 2010-Mar-31 22:45:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.889 1.006 1.033 2010-Mar-31 22:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.160 (still bad) 2010-Mar-31 22:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.162 (still bad) 2010-Mar-31 22:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.168 (still bad) 2010-Mar-31 22:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.161 (still bad) 2010-Mar-31 22:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 22:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.162 (still bad) 2010-Mar-31 22:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.161 (still bad) 2010-Mar-31 22:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.162 (still bad) 2010-Mar-31 22:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 22:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.164 (still bad) 2010-Mar-31 22:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.160 (still bad) 2010-Mar-31 22:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.165 (still bad) 2010-Mar-31 22:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.159 (still bad) 2010-Mar-31 22:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.168 (still bad) 2010-Mar-31 22:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.163 (still bad) 2010-Mar-31 22:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.164 (still bad) 2010-Mar-31 22:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.164 (still bad) 2010-Mar-31 22:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 22:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.160 (still bad) 2010-Mar-31 22:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.168 (still bad) 2010-Mar-31 22:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.162 (still bad) 2010-Mar-31 22:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 22:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 22:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.162 (still bad) 2010-Mar-31 22:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.165 (still bad) 2010-Mar-31 22:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.162 (still bad) 2010-Mar-31 22:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 22:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 22:46:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.160 1.002 0.973 2010-Mar-31 22:46:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.128 1.116 0.976 2010-Mar-31 22:46:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.873 1.144 0.984 2010-Mar-31 22:46:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.888 1.005 1.033 2010-Mar-31 22:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.166 (still bad) 2010-Mar-31 22:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.160 (still bad) 2010-Mar-31 22:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.158 (still bad) 2010-Mar-31 22:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.162 (still bad) 2010-Mar-31 22:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.161 (still bad) 2010-Mar-31 22:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.165 (still bad) 2010-Mar-31 22:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.159 (still bad) 2010-Mar-31 22:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.158 (still bad) 2010-Mar-31 22:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.159 (still bad) 2010-Mar-31 22:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 22:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 22:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.159 (still bad) 2010-Mar-31 22:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.159 (still bad) 2010-Mar-31 22:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 22:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.160 (still bad) 2010-Mar-31 22:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 22:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.165 (still bad) 2010-Mar-31 22:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.160 (still bad) 2010-Mar-31 22:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.158 (still bad) 2010-Mar-31 22:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.161 (still bad) 2010-Mar-31 22:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.162 (still bad) 2010-Mar-31 22:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.163 (still bad) 2010-Mar-31 22:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.170 (still bad) 2010-Mar-31 22:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.163 (still bad) 2010-Mar-31 22:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.161 (still bad) 2010-Mar-31 22:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.163 (still bad) 2010-Mar-31 22:47:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.539 < 0.75)! 2010-Mar-31 22:47:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.162 1.002 0.972 2010-Mar-31 22:47:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.539 1.148 1.115 0.976 2010-Mar-31 22:47:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.871 1.142 0.985 2010-Mar-31 22:47:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.887 1.004 1.033 2010-Mar-31 22:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.161 (still bad) 2010-Mar-31 22:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.168 (still bad) 2010-Mar-31 22:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.161 (still bad) 2010-Mar-31 22:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.158 (still bad) 2010-Mar-31 22:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.184 (still bad) 2010-Mar-31 22:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.221 (still bad) 2010-Mar-31 22:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.273 (still bad) 2010-Mar-31 22:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.327 (still bad) 2010-Mar-31 22:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.618 and 1.368 (still bad) 2010-Mar-31 22:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.385 (still bad) 2010-Mar-31 22:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.620 and 1.386 (still bad) 2010-Mar-31 22:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.613 and 1.372 (still bad) 2010-Mar-31 22:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.597 and 1.334 (still bad) 2010-Mar-31 22:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.588 and 1.269 (still bad) 2010-Mar-31 22:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.220 (still bad) 2010-Mar-31 22:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.186 (still bad) 2010-Mar-31 22:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.193 (still bad) 2010-Mar-31 22:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.227 (still bad) 2010-Mar-31 22:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.274 (still bad) 2010-Mar-31 22:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.323 (still bad) 2010-Mar-31 22:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.361 (still bad) 2010-Mar-31 22:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.402 (still bad) 2010-Mar-31 22:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.398 (still bad) 2010-Mar-31 22:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.377 (still bad) 2010-Mar-31 22:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.348 (still bad) 2010-Mar-31 22:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.294 (still bad) 2010-Mar-31 22:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.244 (still bad) 2010-Mar-31 22:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.209 (still bad) 2010-Mar-31 22:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.178 (still bad) 2010-Mar-31 22:48:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.533 < 0.75)! 2010-Mar-31 22:48:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.165 1.009 0.975 2010-Mar-31 22:48:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.533 1.129 1.116 0.977 2010-Mar-31 22:48:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.871 1.147 0.986 2010-Mar-31 22:48:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.922 1.039 1.071 2010-Mar-31 22:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 22:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.162 (still bad) 2010-Mar-31 22:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.165 (still bad) 2010-Mar-31 22:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.169 (still bad) 2010-Mar-31 22:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.168 (still bad) 2010-Mar-31 22:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.168 (still bad) 2010-Mar-31 22:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.170 (still bad) 2010-Mar-31 22:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.163 (still bad) 2010-Mar-31 22:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.156 (still bad) 2010-Mar-31 22:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 22:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.155 (still bad) 2010-Mar-31 22:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.159 (still bad) 2010-Mar-31 22:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 22:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.164 (still bad) 2010-Mar-31 22:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.162 (still bad) 2010-Mar-31 22:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.167 (still bad) 2010-Mar-31 22:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 22:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 22:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 22:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.166 (still bad) 2010-Mar-31 22:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 22:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 22:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.178 (still bad) 2010-Mar-31 22:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.182 (still bad) 2010-Mar-31 22:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.176 (still bad) 2010-Mar-31 22:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 22:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.173 (still bad) 2010-Mar-31 22:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.166 (still bad) 2010-Mar-31 22:49:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 22:49:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.166 1.006 0.974 2010-Mar-31 22:49:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.130 1.118 0.980 2010-Mar-31 22:49:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.872 1.144 0.985 2010-Mar-31 22:49:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.890 1.007 1.036 2010-Mar-31 22:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.168 (still bad) 2010-Mar-31 22:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 22:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.160 (still bad) 2010-Mar-31 22:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.163 (still bad) 2010-Mar-31 22:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.589 and 1.162 (still bad) 2010-Mar-31 22:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.160 (still bad) 2010-Mar-31 22:49:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:49:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:49:23 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:49:23 LOG5 end_task: Level: (2) ID = <10262> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG1 fixed_driftmap: New position: year = 2010.2490101592009 RA = 11:26:15.9 RA/Dec = 11:26:50.4 +19:17:07.6 2010-Mar-31 22:49:23 NOTE fixed_driftmap: Correcting ZA to 6:27:11.5 ... 2010-Mar-31 22:49:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4531937816 -CF 2010-Mar-31 22:49:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:49:23 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:49:23 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:49:23 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:49:23 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:49:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:49:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:49:23 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:49:23 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4531937816 -CF 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:49:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:49:23 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:49:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:49:23 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:49:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:49:23 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Mar-31 22:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:49:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:49:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:49:24 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:49:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:49:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:49:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:49:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:49:24 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:49:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:49:24 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:49:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:49:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:49:24 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:49:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:49:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:49:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:49:24 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:49:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:49:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:49:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:49:24 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:49:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:49:24 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:49:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:49:24 INFO2 take_data: Starting WAPP 1-second scan: 9000101 2010-Mar-31 22:49:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:49:24 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Mar-31 22:49:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:49:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:49:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10165.00 2010-Mar-31 22:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.160 (still bad) 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:49:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:49:26 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:49:26 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:49:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:49:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:49:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:49:26 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:49:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:49:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:49:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:49:26 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:49:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:49:26 LOG5 finish_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:49:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:49:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:49:26 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Mar-31 22:49:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2010-Mar-31 22:49:26 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2010-Mar-31 22:49:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:49:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:49:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:49:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:49:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:49:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:49:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:49:27 LOG5 begin_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2010-Mar-31 22:49:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:49:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:49:27 INFO2 take_data: Starting WAPP 600-second scan: 9000102 2010-Mar-31 22:49:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:49:27 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Mar-31 22:49:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:49:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.590 (still bad) 2010-Mar-31 22:49:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:49:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10168.00 2010-Mar-31 22:49:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0021.fits 2010-Mar-31 22:49:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0021.fits} 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 22:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 22:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 22:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.155 (still bad) 2010-Mar-31 22:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.155 (still bad) 2010-Mar-31 22:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.157 (still bad) 2010-Mar-31 22:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.157 (still bad) 2010-Mar-31 22:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.154 (still bad) 2010-Mar-31 22:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.156 (still bad) 2010-Mar-31 22:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.155 (still bad) 2010-Mar-31 22:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.157 (still bad) 2010-Mar-31 22:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.158 (still bad) 2010-Mar-31 22:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.156 (still bad) 2010-Mar-31 22:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.155 (still bad) 2010-Mar-31 22:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:50:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 22:50:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.159 1.010 0.978 2010-Mar-31 22:50:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.127 1.117 0.977 2010-Mar-31 22:50:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.871 1.143 0.986 2010-Mar-31 22:50:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.891 1.006 1.034 2010-Mar-31 22:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.155 (still bad) 2010-Mar-31 22:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.156 (still bad) 2010-Mar-31 22:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.592 and 1.153 (still bad) 2010-Mar-31 22:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.157 (still bad) 2010-Mar-31 22:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.157 (still bad) 2010-Mar-31 22:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.156 (still bad) 2010-Mar-31 22:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.156 (still bad) 2010-Mar-31 22:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.154 (still bad) 2010-Mar-31 22:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.155 (still bad) 2010-Mar-31 22:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.156 (still bad) 2010-Mar-31 22:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 22:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.156 (still bad) 2010-Mar-31 22:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.158 (still bad) 2010-Mar-31 22:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.158 (still bad) 2010-Mar-31 22:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.159 (still bad) 2010-Mar-31 22:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.161 (still bad) 2010-Mar-31 22:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.159 (still bad) 2010-Mar-31 22:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 22:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.611 and 1.158 (still bad) 2010-Mar-31 22:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.157 (still bad) 2010-Mar-31 22:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.165 (still bad) 2010-Mar-31 22:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.156 (still bad) 2010-Mar-31 22:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.156 (still bad) 2010-Mar-31 22:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 22:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.155 (still bad) 2010-Mar-31 22:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 22:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 22:51:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 22:51:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.157 1.006 0.973 2010-Mar-31 22:51:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.138 1.116 0.978 2010-Mar-31 22:51:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.880 1.142 0.984 2010-Mar-31 22:51:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.887 1.005 1.032 2010-Mar-31 22:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.155 (still bad) 2010-Mar-31 22:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.159 (still bad) 2010-Mar-31 22:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.157 (still bad) 2010-Mar-31 22:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.160 (still bad) 2010-Mar-31 22:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.168 (still bad) 2010-Mar-31 22:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.161 (still bad) 2010-Mar-31 22:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.162 (still bad) 2010-Mar-31 22:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.576 and 1.156 (still bad) 2010-Mar-31 22:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.158 (still bad) 2010-Mar-31 22:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.169 (still bad) 2010-Mar-31 22:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.166 (still bad) 2010-Mar-31 22:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.175 (still bad) 2010-Mar-31 22:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.184 (still bad) 2010-Mar-31 22:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.190 (still bad) 2010-Mar-31 22:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.201 (still bad) 2010-Mar-31 22:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.208 (still bad) 2010-Mar-31 22:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.202 (still bad) 2010-Mar-31 22:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.676 and 1.198 (still bad) 2010-Mar-31 22:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.193 (still bad) 2010-Mar-31 22:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.181 (still bad) 2010-Mar-31 22:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.177 (still bad) 2010-Mar-31 22:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.177 (still bad) 2010-Mar-31 22:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.161 (still bad) 2010-Mar-31 22:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.159 (still bad) 2010-Mar-31 22:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.156 (still bad) 2010-Mar-31 22:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.157 (still bad) 2010-Mar-31 22:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.158 (still bad) 2010-Mar-31 22:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.167 (still bad) 2010-Mar-31 22:52:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.542 < 0.75)! 2010-Mar-31 22:52:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.157 1.013 0.983 2010-Mar-31 22:52:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.542 1.127 1.116 0.978 2010-Mar-31 22:52:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.871 1.153 0.989 2010-Mar-31 22:52:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.886 1.007 1.031 2010-Mar-31 22:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.159 (still bad) 2010-Mar-31 22:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.162 (still bad) 2010-Mar-31 22:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.546 and 1.156 (still bad) 2010-Mar-31 22:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.567 and 1.160 (still bad) 2010-Mar-31 22:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.168 (still bad) 2010-Mar-31 22:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.552 and 1.158 (still bad) 2010-Mar-31 22:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.158 (still bad) 2010-Mar-31 22:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.554 and 1.160 (still bad) 2010-Mar-31 22:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.158 (still bad) 2010-Mar-31 22:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 22:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.156 (still bad) 2010-Mar-31 22:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.158 (still bad) 2010-Mar-31 22:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.158 (still bad) 2010-Mar-31 22:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.158 (still bad) 2010-Mar-31 22:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.156 (still bad) 2010-Mar-31 22:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.154 (still bad) 2010-Mar-31 22:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.157 (still bad) 2010-Mar-31 22:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.158 (still bad) 2010-Mar-31 22:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 22:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 22:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.159 (still bad) 2010-Mar-31 22:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.157 (still bad) 2010-Mar-31 22:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 22:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.160 (still bad) 2010-Mar-31 22:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:53:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.531 < 0.75)! 2010-Mar-31 22:53:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.157 1.003 0.970 2010-Mar-31 22:53:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.531 1.133 1.115 0.975 2010-Mar-31 22:53:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.871 1.143 0.983 2010-Mar-31 22:53:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.888 1.006 1.031 2010-Mar-31 22:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.159 (still bad) 2010-Mar-31 22:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.158 (still bad) 2010-Mar-31 22:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.158 (still bad) 2010-Mar-31 22:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.157 (still bad) 2010-Mar-31 22:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.156 (still bad) 2010-Mar-31 22:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 22:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.157 (still bad) 2010-Mar-31 22:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.158 (still bad) 2010-Mar-31 22:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.157 (still bad) 2010-Mar-31 22:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.160 (still bad) 2010-Mar-31 22:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.617 and 1.158 (still bad) 2010-Mar-31 22:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.583 and 1.160 (still bad) 2010-Mar-31 22:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.160 (still bad) 2010-Mar-31 22:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.160 (still bad) 2010-Mar-31 22:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.160 (still bad) 2010-Mar-31 22:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.619 and 1.161 (still bad) 2010-Mar-31 22:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.162 (still bad) 2010-Mar-31 22:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.160 (still bad) 2010-Mar-31 22:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.161 (still bad) 2010-Mar-31 22:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.161 (still bad) 2010-Mar-31 22:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.158 (still bad) 2010-Mar-31 22:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.158 (still bad) 2010-Mar-31 22:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.159 (still bad) 2010-Mar-31 22:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.157 (still bad) 2010-Mar-31 22:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 22:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.161 (still bad) 2010-Mar-31 22:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:54:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 22:54:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.162 1.006 0.974 2010-Mar-31 22:54:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.133 1.151 1.005 2010-Mar-31 22:54:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.874 1.146 0.984 2010-Mar-31 22:54:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.889 1.007 1.033 2010-Mar-31 22:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 22:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.159 (still bad) 2010-Mar-31 22:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.171 (still bad) 2010-Mar-31 22:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.160 (still bad) 2010-Mar-31 22:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.158 (still bad) 2010-Mar-31 22:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 22:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 22:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.167 (still bad) 2010-Mar-31 22:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.158 (still bad) 2010-Mar-31 22:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 22:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.161 (still bad) 2010-Mar-31 22:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.155 (still bad) 2010-Mar-31 22:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.158 (still bad) 2010-Mar-31 22:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.167 (still bad) 2010-Mar-31 22:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.160 (still bad) 2010-Mar-31 22:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.159 (still bad) 2010-Mar-31 22:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.162 (still bad) 2010-Mar-31 22:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.157 (still bad) 2010-Mar-31 22:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.166 (still bad) 2010-Mar-31 22:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.159 (still bad) 2010-Mar-31 22:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.158 (still bad) 2010-Mar-31 22:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.163 (still bad) 2010-Mar-31 22:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.158 (still bad) 2010-Mar-31 22:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.158 (still bad) 2010-Mar-31 22:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.172 (still bad) 2010-Mar-31 22:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 22:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.162 (still bad) 2010-Mar-31 22:55:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.536 < 0.75)! 2010-Mar-31 22:55:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.163 1.005 0.973 2010-Mar-31 22:55:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.536 1.130 1.119 0.980 2010-Mar-31 22:55:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.874 1.150 0.987 2010-Mar-31 22:55:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.889 1.007 1.032 2010-Mar-31 22:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.161 (still bad) 2010-Mar-31 22:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.164 (still bad) 2010-Mar-31 22:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.172 (still bad) 2010-Mar-31 22:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.162 (still bad) 2010-Mar-31 22:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.159 (still bad) 2010-Mar-31 22:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.164 (still bad) 2010-Mar-31 22:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.160 (still bad) 2010-Mar-31 22:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.162 (still bad) 2010-Mar-31 22:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.170 (still bad) 2010-Mar-31 22:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.159 (still bad) 2010-Mar-31 22:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.160 (still bad) 2010-Mar-31 22:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 22:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 22:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.169 (still bad) 2010-Mar-31 22:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.161 (still bad) 2010-Mar-31 22:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.159 (still bad) 2010-Mar-31 22:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 22:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.158 (still bad) 2010-Mar-31 22:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.158 (still bad) 2010-Mar-31 22:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.162 (still bad) 2010-Mar-31 22:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 22:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 22:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.159 (still bad) 2010-Mar-31 22:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.162 (still bad) 2010-Mar-31 22:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.169 (still bad) 2010-Mar-31 22:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 22:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.161 (still bad) 2010-Mar-31 22:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 22:56:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Mar-31 22:56:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.164 1.004 0.972 2010-Mar-31 22:56:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.127 1.120 0.977 2010-Mar-31 22:56:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.873 1.149 0.987 2010-Mar-31 22:56:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.891 1.006 1.034 2010-Mar-31 22:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 22:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.172 (still bad) 2010-Mar-31 22:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.164 (still bad) 2010-Mar-31 22:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.163 (still bad) 2010-Mar-31 22:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 22:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.163 (still bad) 2010-Mar-31 22:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 22:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.162 (still bad) 2010-Mar-31 22:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 22:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.165 (still bad) 2010-Mar-31 22:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.161 (still bad) 2010-Mar-31 22:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 22:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.163 (still bad) 2010-Mar-31 22:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.158 (still bad) 2010-Mar-31 22:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.162 (still bad) 2010-Mar-31 22:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 22:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.158 (still bad) 2010-Mar-31 22:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 22:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 22:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 22:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.162 (still bad) 2010-Mar-31 22:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.161 (still bad) 2010-Mar-31 22:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 22:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.169 (still bad) 2010-Mar-31 22:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.160 (still bad) 2010-Mar-31 22:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 22:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.162 (still bad) 2010-Mar-31 22:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.161 (still bad) 2010-Mar-31 22:57:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.521 < 0.75)! 2010-Mar-31 22:57:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.162 1.005 0.972 2010-Mar-31 22:57:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.521 1.130 1.117 0.978 2010-Mar-31 22:57:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.875 1.147 0.986 2010-Mar-31 22:57:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.889 1.007 1.033 2010-Mar-31 22:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Mar-31 22:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.163 (still bad) 2010-Mar-31 22:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.160 (still bad) 2010-Mar-31 22:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 22:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.161 (still bad) 2010-Mar-31 22:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.163 (still bad) 2010-Mar-31 22:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.164 (still bad) 2010-Mar-31 22:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 22:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 22:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 22:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.165 (still bad) 2010-Mar-31 22:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.167 (still bad) 2010-Mar-31 22:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.166 (still bad) 2010-Mar-31 22:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 22:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.164 (still bad) 2010-Mar-31 22:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.166 (still bad) 2010-Mar-31 22:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 22:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.167 (still bad) 2010-Mar-31 22:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.166 (still bad) 2010-Mar-31 22:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.158 (still bad) 2010-Mar-31 22:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.162 (still bad) 2010-Mar-31 22:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 22:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 22:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 22:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.161 (still bad) 2010-Mar-31 22:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 22:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.162 (still bad) 2010-Mar-31 22:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 22:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.161 (still bad) 2010-Mar-31 22:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.165 (still bad) 2010-Mar-31 22:58:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.533 < 0.75)! 2010-Mar-31 22:58:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.165 1.009 0.975 2010-Mar-31 22:58:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.533 1.130 1.118 0.981 2010-Mar-31 22:58:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.873 1.149 0.990 2010-Mar-31 22:58:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.890 1.008 1.035 2010-Mar-31 22:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.731 and 1.162 (still bad) 2010-Mar-31 22:58:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.162 2010-Mar-31 22:58:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.727 < 0.75)! 2010-Mar-31 22:58:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.161 1.006 0.973 2010-Mar-31 22:58:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.727 1.127 1.116 0.978 2010-Mar-31 22:58:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.872 1.146 0.986 2010-Mar-31 22:58:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.889 1.005 1.033 2010-Mar-31 22:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.725 and 1.162 (still bad) 2010-Mar-31 22:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.161 (still bad) 2010-Mar-31 22:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.161 (still bad) 2010-Mar-31 22:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.681 and 1.163 (still bad) 2010-Mar-31 22:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.162 (still bad) 2010-Mar-31 22:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.639 and 1.165 (still bad) 2010-Mar-31 22:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.629 and 1.165 (still bad) 2010-Mar-31 22:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.162 (still bad) 2010-Mar-31 22:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.165 (still bad) 2010-Mar-31 22:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.166 (still bad) 2010-Mar-31 22:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.165 (still bad) 2010-Mar-31 22:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 22:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.163 (still bad) 2010-Mar-31 22:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.162 (still bad) 2010-Mar-31 22:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.173 (still bad) 2010-Mar-31 22:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.165 (still bad) 2010-Mar-31 22:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.160 (still bad) 2010-Mar-31 22:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 22:59:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:59:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:59:28 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:59:28 LOG5 end_task: Level: (2) ID = <10273> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG1 fixed_driftmap: New position: year = 2010.2490293304941 RA = 11:36:21.7 RA/Dec = 11:36:56.0 +19:17:06.1 2010-Mar-31 22:59:28 NOTE fixed_driftmap: Correcting ZA to 6:26:59.1 ... 2010-Mar-31 22:59:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4497534162 -CF 2010-Mar-31 22:59:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 22:59:28 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 22:59:28 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 22:59:28 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 22:59:28 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 22:59:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 22:59:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:59:28 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 22:59:28 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4497534162 -CF 2010-Mar-31 22:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 22:59:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 22:59:28 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 22:59:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:59:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 22:59:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:59:28 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Mar-31 22:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 22:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:59:29 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:59:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 22:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 22:59:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 22:59:29 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 22:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 22:59:29 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 22:59:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 22:59:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 22:59:29 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 22:59:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 22:59:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 22:59:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:59:29 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:59:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 22:59:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:59:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:59:29 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 22:59:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:59:29 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 22:59:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:59:29 INFO2 take_data: Starting WAPP 1-second scan: 9000103 2010-Mar-31 22:59:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:59:29 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Mar-31 22:59:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:59:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 22:59:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10770.00 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 22:59:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 22:59:31 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 22:59:31 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 22:59:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 22:59:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 22:59:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 22:59:31 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 22:59:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 22:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.596 (still bad) 2010-Mar-31 22:59:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 22:59:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 22:59:31 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 22:59:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 22:59:31 LOG5 finish_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 22:59:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 22:59:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 22:59:31 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Mar-31 22:59:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2010-Mar-31 22:59:31 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2010-Mar-31 22:59:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:59:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:59:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:59:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 22:59:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 22:59:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 22:59:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 22:59:32 LOG5 begin_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2010-Mar-31 22:59:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 22:59:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 22:59:32 INFO2 take_data: Starting WAPP 600-second scan: 9000104 2010-Mar-31 22:59:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 22:59:32 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Mar-31 22:59:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 22:59:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 22:59:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 22:59:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10773.00 2010-Mar-31 22:59:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0022.fits 2010-Mar-31 22:59:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0022.fits} 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 22:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.161 (still bad) 2010-Mar-31 22:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.159 (still bad) 2010-Mar-31 22:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 22:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.158 (still bad) 2010-Mar-31 22:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.158 (still bad) 2010-Mar-31 22:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.168 (still bad) 2010-Mar-31 22:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.161 (still bad) 2010-Mar-31 22:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.160 (still bad) 2010-Mar-31 22:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 22:59:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 22:59:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.161 1.005 0.972 2010-Mar-31 22:59:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.128 1.117 0.976 2010-Mar-31 22:59:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.872 1.144 0.984 2010-Mar-31 22:59:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.886 1.006 1.031 2010-Mar-31 22:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 22:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.170 (still bad) 2010-Mar-31 22:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 23:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.161 (still bad) 2010-Mar-31 23:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.164 (still bad) 2010-Mar-31 23:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.160 (still bad) 2010-Mar-31 23:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.159 (still bad) 2010-Mar-31 23:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.162 (still bad) 2010-Mar-31 23:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.161 (still bad) 2010-Mar-31 23:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 23:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.160 (still bad) 2010-Mar-31 23:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.161 (still bad) 2010-Mar-31 23:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.168 (still bad) 2010-Mar-31 23:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 23:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.160 (still bad) 2010-Mar-31 23:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.160 (still bad) 2010-Mar-31 23:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.161 (still bad) 2010-Mar-31 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.164 (still bad) 2010-Mar-31 23:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 23:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 23:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 23:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 23:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.167 (still bad) 2010-Mar-31 23:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.162 (still bad) 2010-Mar-31 23:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.600 and 1.159 (still bad) 2010-Mar-31 23:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.568 and 1.162 (still bad) 2010-Mar-31 23:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.158 (still bad) 2010-Mar-31 23:00:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 23:00:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.160 1.005 0.971 2010-Mar-31 23:00:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.131 1.117 0.977 2010-Mar-31 23:00:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.872 1.144 0.985 2010-Mar-31 23:00:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.889 1.007 1.033 2010-Mar-31 23:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.164 (still bad) 2010-Mar-31 23:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.161 (still bad) 2010-Mar-31 23:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.160 (still bad) 2010-Mar-31 23:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 23:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.161 (still bad) 2010-Mar-31 23:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.160 (still bad) 2010-Mar-31 23:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.165 (still bad) 2010-Mar-31 23:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 23:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.159 (still bad) 2010-Mar-31 23:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 23:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 23:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 23:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.160 (still bad) 2010-Mar-31 23:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.159 (still bad) 2010-Mar-31 23:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.161 (still bad) 2010-Mar-31 23:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 23:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.160 (still bad) 2010-Mar-31 23:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.165 (still bad) 2010-Mar-31 23:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.162 (still bad) 2010-Mar-31 23:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.160 (still bad) 2010-Mar-31 23:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.162 (still bad) 2010-Mar-31 23:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.162 (still bad) 2010-Mar-31 23:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.159 (still bad) 2010-Mar-31 23:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.157 (still bad) 2010-Mar-31 23:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.160 (still bad) 2010-Mar-31 23:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 23:01:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 23:01:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.161 1.005 0.971 2010-Mar-31 23:01:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.128 1.117 0.978 2010-Mar-31 23:01:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.874 1.144 0.986 2010-Mar-31 23:01:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.888 1.006 1.032 2010-Mar-31 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.162 (still bad) 2010-Mar-31 23:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.161 (still bad) 2010-Mar-31 23:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.159 (still bad) 2010-Mar-31 23:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 23:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.157 (still bad) 2010-Mar-31 23:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.158 (still bad) 2010-Mar-31 23:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.161 (still bad) 2010-Mar-31 23:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 23:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.160 (still bad) 2010-Mar-31 23:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.164 (still bad) 2010-Mar-31 23:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.162 (still bad) 2010-Mar-31 23:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 23:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.167 (still bad) 2010-Mar-31 23:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.163 (still bad) 2010-Mar-31 23:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.163 (still bad) 2010-Mar-31 23:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.166 (still bad) 2010-Mar-31 23:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 23:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.167 (still bad) 2010-Mar-31 23:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 23:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Mar-31 23:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.173 (still bad) 2010-Mar-31 23:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.178 (still bad) 2010-Mar-31 23:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Mar-31 23:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.180 (still bad) 2010-Mar-31 23:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Mar-31 23:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.168 (still bad) 2010-Mar-31 23:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.168 (still bad) 2010-Mar-31 23:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.162 (still bad) 2010-Mar-31 23:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.160 (still bad) 2010-Mar-31 23:02:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.521 < 0.75)! 2010-Mar-31 23:02:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.164 1.009 0.974 2010-Mar-31 23:02:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.521 1.130 1.121 0.980 2010-Mar-31 23:02:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.875 1.154 0.996 2010-Mar-31 23:02:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.896 1.013 1.041 2010-Mar-31 23:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.159 (still bad) 2010-Mar-31 23:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.156 (still bad) 2010-Mar-31 23:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.162 (still bad) 2010-Mar-31 23:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.157 (still bad) 2010-Mar-31 23:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.159 (still bad) 2010-Mar-31 23:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 23:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.159 (still bad) 2010-Mar-31 23:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 23:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.160 (still bad) 2010-Mar-31 23:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 23:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.159 (still bad) 2010-Mar-31 23:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.163 (still bad) 2010-Mar-31 23:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.158 (still bad) 2010-Mar-31 23:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.158 (still bad) 2010-Mar-31 23:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 23:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.158 (still bad) 2010-Mar-31 23:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.164 (still bad) 2010-Mar-31 23:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 23:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 23:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.161 (still bad) 2010-Mar-31 23:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.161 (still bad) 2010-Mar-31 23:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.158 (still bad) 2010-Mar-31 23:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.157 (still bad) 2010-Mar-31 23:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.159 (still bad) 2010-Mar-31 23:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.160 (still bad) 2010-Mar-31 23:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.161 (still bad) 2010-Mar-31 23:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.161 (still bad) 2010-Mar-31 23:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.168 (still bad) 2010-Mar-31 23:04:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 23:04:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.161 1.005 0.971 2010-Mar-31 23:04:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.130 1.118 0.977 2010-Mar-31 23:04:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.873 1.146 0.986 2010-Mar-31 23:04:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.890 1.007 1.034 2010-Mar-31 23:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.161 (still bad) 2010-Mar-31 23:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 23:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.162 (still bad) 2010-Mar-31 23:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 23:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.169 (still bad) 2010-Mar-31 23:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.164 (still bad) 2010-Mar-31 23:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.165 (still bad) 2010-Mar-31 23:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.162 (still bad) 2010-Mar-31 23:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 23:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.170 (still bad) 2010-Mar-31 23:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.167 (still bad) 2010-Mar-31 23:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.166 (still bad) 2010-Mar-31 23:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.163 (still bad) 2010-Mar-31 23:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 23:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.163 (still bad) 2010-Mar-31 23:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.162 (still bad) 2010-Mar-31 23:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.160 (still bad) 2010-Mar-31 23:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.161 (still bad) 2010-Mar-31 23:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.161 (still bad) 2010-Mar-31 23:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 23:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.167 (still bad) 2010-Mar-31 23:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.161 (still bad) 2010-Mar-31 23:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 23:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.163 (still bad) 2010-Mar-31 23:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.160 (still bad) 2010-Mar-31 23:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.160 (still bad) 2010-Mar-31 23:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.164 (still bad) 2010-Mar-31 23:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 23:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.161 (still bad) 2010-Mar-31 23:05:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.75)! 2010-Mar-31 23:05:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.164 1.010 0.973 2010-Mar-31 23:05:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.526 1.130 1.121 0.978 2010-Mar-31 23:05:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.874 1.147 0.985 2010-Mar-31 23:05:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.894 1.010 1.038 2010-Mar-31 23:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.159 (still bad) 2010-Mar-31 23:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.159 (still bad) 2010-Mar-31 23:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.160 (still bad) 2010-Mar-31 23:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 23:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 23:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.162 (still bad) 2010-Mar-31 23:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.158 (still bad) 2010-Mar-31 23:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.161 (still bad) 2010-Mar-31 23:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.166 (still bad) 2010-Mar-31 23:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 23:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.159 (still bad) 2010-Mar-31 23:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.160 (still bad) 2010-Mar-31 23:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.160 (still bad) 2010-Mar-31 23:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.162 (still bad) 2010-Mar-31 23:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.163 (still bad) 2010-Mar-31 23:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 23:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.161 (still bad) 2010-Mar-31 23:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.162 (still bad) 2010-Mar-31 23:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.161 (still bad) 2010-Mar-31 23:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.164 (still bad) 2010-Mar-31 23:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.162 (still bad) 2010-Mar-31 23:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 23:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 23:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.157 (still bad) 2010-Mar-31 23:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.161 (still bad) 2010-Mar-31 23:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.168 (still bad) 2010-Mar-31 23:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.160 (still bad) 2010-Mar-31 23:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.161 (still bad) 2010-Mar-31 23:06:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Mar-31 23:06:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.163 1.010 0.975 2010-Mar-31 23:06:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.136 1.124 0.981 2010-Mar-31 23:06:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.879 1.146 0.986 2010-Mar-31 23:06:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.893 1.010 1.037 2010-Mar-31 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.162 (still bad) 2010-Mar-31 23:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.162 (still bad) 2010-Mar-31 23:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Mar-31 23:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.160 (still bad) 2010-Mar-31 23:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.158 (still bad) 2010-Mar-31 23:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 23:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.159 (still bad) 2010-Mar-31 23:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.161 (still bad) 2010-Mar-31 23:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.163 (still bad) 2010-Mar-31 23:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.160 (still bad) 2010-Mar-31 23:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.161 (still bad) 2010-Mar-31 23:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.168 (still bad) 2010-Mar-31 23:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.160 (still bad) 2010-Mar-31 23:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.162 (still bad) 2010-Mar-31 23:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.162 (still bad) 2010-Mar-31 23:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.163 (still bad) 2010-Mar-31 23:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.169 (still bad) 2010-Mar-31 23:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.163 (still bad) 2010-Mar-31 23:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.164 (still bad) 2010-Mar-31 23:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.592 and 1.166 (still bad) 2010-Mar-31 23:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.163 (still bad) 2010-Mar-31 23:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 23:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.170 (still bad) 2010-Mar-31 23:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.164 (still bad) 2010-Mar-31 23:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.163 (still bad) 2010-Mar-31 23:07:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 23:07:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.166 1.011 0.974 2010-Mar-31 23:07:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.133 1.124 0.980 2010-Mar-31 23:07:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.875 1.151 0.990 2010-Mar-31 23:07:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.893 1.011 1.037 2010-Mar-31 23:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.163 (still bad) 2010-Mar-31 23:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.163 (still bad) 2010-Mar-31 23:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.172 (still bad) 2010-Mar-31 23:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 23:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.161 (still bad) 2010-Mar-31 23:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.558 and 1.165 (still bad) 2010-Mar-31 23:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.164 (still bad) 2010-Mar-31 23:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.163 (still bad) 2010-Mar-31 23:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:07:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.750 and 1.164 2010-Mar-31 23:07:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.554 < 0.75)! 2010-Mar-31 23:07:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.164 1.012 0.977 2010-Mar-31 23:07:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.554 1.137 1.128 0.984 2010-Mar-31 23:07:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.876 1.150 0.989 2010-Mar-31 23:07:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.894 1.011 1.038 2010-Mar-31 23:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.162 (still bad) 2010-Mar-31 23:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.163 (still bad) 2010-Mar-31 23:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 23:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.563 and 1.163 (still bad) 2010-Mar-31 23:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.164 (still bad) 2010-Mar-31 23:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.165 (still bad) 2010-Mar-31 23:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.162 (still bad) 2010-Mar-31 23:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.165 (still bad) 2010-Mar-31 23:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.166 (still bad) 2010-Mar-31 23:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.164 (still bad) 2010-Mar-31 23:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.166 (still bad) 2010-Mar-31 23:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.166 (still bad) 2010-Mar-31 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.167 (still bad) 2010-Mar-31 23:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Mar-31 23:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.167 (still bad) 2010-Mar-31 23:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.165 (still bad) 2010-Mar-31 23:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.169 (still bad) 2010-Mar-31 23:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.167 (still bad) 2010-Mar-31 23:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.169 (still bad) 2010-Mar-31 23:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 23:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.168 (still bad) 2010-Mar-31 23:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.169 (still bad) 2010-Mar-31 23:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.167 (still bad) 2010-Mar-31 23:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.167 (still bad) 2010-Mar-31 23:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.169 (still bad) 2010-Mar-31 23:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.166 (still bad) 2010-Mar-31 23:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:08:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.529 < 0.75)! 2010-Mar-31 23:08:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.168 1.011 0.978 2010-Mar-31 23:08:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.529 1.130 1.121 0.979 2010-Mar-31 23:08:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.877 1.149 0.989 2010-Mar-31 23:08:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.896 1.010 1.039 2010-Mar-31 23:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 23:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.167 (still bad) 2010-Mar-31 23:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 23:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.167 (still bad) 2010-Mar-31 23:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.165 (still bad) 2010-Mar-31 23:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.165 (still bad) 2010-Mar-31 23:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.166 (still bad) 2010-Mar-31 23:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.166 (still bad) 2010-Mar-31 23:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.167 (still bad) 2010-Mar-31 23:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.165 (still bad) 2010-Mar-31 23:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.165 (still bad) 2010-Mar-31 23:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.167 (still bad) 2010-Mar-31 23:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.165 (still bad) 2010-Mar-31 23:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.164 (still bad) 2010-Mar-31 23:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.166 (still bad) 2010-Mar-31 23:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.166 (still bad) 2010-Mar-31 23:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.165 (still bad) 2010-Mar-31 23:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.167 (still bad) 2010-Mar-31 23:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.164 (still bad) 2010-Mar-31 23:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.165 (still bad) 2010-Mar-31 23:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.163 (still bad) 2010-Mar-31 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.168 (still bad) 2010-Mar-31 23:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.174 (still bad) 2010-Mar-31 23:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.165 (still bad) 2010-Mar-31 23:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.161 (still bad) 2010-Mar-31 23:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.166 (still bad) 2010-Mar-31 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.166 (still bad) 2010-Mar-31 23:09:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.609 < 0.75)! 2010-Mar-31 23:09:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.167 1.011 0.976 2010-Mar-31 23:09:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.609 1.131 1.125 0.982 2010-Mar-31 23:09:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.877 1.152 0.990 2010-Mar-31 23:09:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.894 1.013 1.038 2010-Mar-31 23:09:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:09:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:09:33 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:09:33 LOG5 end_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 LOG1 fixed_driftmap: New position: year = 2010.2490485017872 RA = 11:46:27.7 RA/Dec = 11:47:01.8 +19:17:04.9 2010-Mar-31 23:09:33 NOTE fixed_driftmap: Correcting ZA to 6:26:49.9 ... 2010-Mar-31 23:09:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4472083287 -CF 2010-Mar-31 23:09:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:09:33 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:09:33 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:09:33 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:09:33 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:09:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:09:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:09:33 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:09:33 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4472083287 -CF 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.173 (still bad) 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:09:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:09:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:09:33 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2010-Mar-31 23:09:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:09:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:09:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:09:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:09:33 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:09:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:09:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:09:34 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:09:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:09:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:09:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:09:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:09:34 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:09:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:09:34 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:09:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:09:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:09:34 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:09:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:09:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:09:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:09:34 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:09:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:09:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:09:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:09:34 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:09:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:09:34 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:09:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:09:34 INFO2 take_data: Starting WAPP 1-second scan: 9000105 2010-Mar-31 23:09:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:09:34 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Mar-31 23:09:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:09:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:09:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11375.00 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:09:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:09:36 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:09:36 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 23:09:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 23:09:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 23:09:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:09:36 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:09:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 23:09:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:09:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:09:36 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 23:09:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 23:09:36 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 23:09:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 23:09:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 23:09:36 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Mar-31 23:09:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2010-Mar-31 23:09:36 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2010-Mar-31 23:09:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:09:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:09:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:09:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:09:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 23:09:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 23:09:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:09:37 LOG5 begin_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2010-Mar-31 23:09:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 23:09:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:09:37 INFO2 take_data: Starting WAPP 600-second scan: 9000106 2010-Mar-31 23:09:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:09:37 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Mar-31 23:09:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.596 (still bad) 2010-Mar-31 23:09:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:09:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 23:09:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11378.00 2010-Mar-31 23:09:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0023.fits 2010-Mar-31 23:09:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0023.fits} 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.570 (still bad) 2010-Mar-31 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.164 (still bad) 2010-Mar-31 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.162 (still bad) 2010-Mar-31 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.173 (still bad) 2010-Mar-31 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.165 (still bad) 2010-Mar-31 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.165 (still bad) 2010-Mar-31 23:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.168 (still bad) 2010-Mar-31 23:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 23:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.167 (still bad) 2010-Mar-31 23:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.174 (still bad) 2010-Mar-31 23:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.164 (still bad) 2010-Mar-31 23:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.164 (still bad) 2010-Mar-31 23:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.169 (still bad) 2010-Mar-31 23:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.166 (still bad) 2010-Mar-31 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.174 (still bad) 2010-Mar-31 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.167 (still bad) 2010-Mar-31 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.167 (still bad) 2010-Mar-31 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.167 (still bad) 2010-Mar-31 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.164 (still bad) 2010-Mar-31 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.174 (still bad) 2010-Mar-31 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.166 (still bad) 2010-Mar-31 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.164 (still bad) 2010-Mar-31 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.166 (still bad) 2010-Mar-31 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.164 (still bad) 2010-Mar-31 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:10:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.75)! 2010-Mar-31 23:10:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.173 1.020 0.984 2010-Mar-31 23:10:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.525 1.139 1.130 0.988 2010-Mar-31 23:10:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.883 1.158 0.996 2010-Mar-31 23:10:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.898 1.019 1.042 2010-Mar-31 23:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.165 (still bad) 2010-Mar-31 23:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 23:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 23:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.164 (still bad) 2010-Mar-31 23:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.166 (still bad) 2010-Mar-31 23:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.166 (still bad) 2010-Mar-31 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.165 (still bad) 2010-Mar-31 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.166 (still bad) 2010-Mar-31 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.167 (still bad) 2010-Mar-31 23:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.164 (still bad) 2010-Mar-31 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.167 (still bad) 2010-Mar-31 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.168 (still bad) 2010-Mar-31 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.168 (still bad) 2010-Mar-31 23:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.167 (still bad) 2010-Mar-31 23:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 23:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.166 (still bad) 2010-Mar-31 23:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.168 (still bad) 2010-Mar-31 23:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.166 (still bad) 2010-Mar-31 23:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 23:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.168 (still bad) 2010-Mar-31 23:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.166 (still bad) 2010-Mar-31 23:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.168 (still bad) 2010-Mar-31 23:11:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 23:11:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.167 1.012 0.977 2010-Mar-31 23:11:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.133 1.125 0.981 2010-Mar-31 23:11:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.884 1.162 0.996 2010-Mar-31 23:11:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.897 1.020 1.043 2010-Mar-31 23:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.165 (still bad) 2010-Mar-31 23:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.168 (still bad) 2010-Mar-31 23:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.167 (still bad) 2010-Mar-31 23:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.166 (still bad) 2010-Mar-31 23:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 23:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.167 (still bad) 2010-Mar-31 23:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.165 (still bad) 2010-Mar-31 23:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.164 (still bad) 2010-Mar-31 23:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.165 (still bad) 2010-Mar-31 23:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.166 (still bad) 2010-Mar-31 23:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.167 (still bad) 2010-Mar-31 23:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.165 (still bad) 2010-Mar-31 23:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.168 (still bad) 2010-Mar-31 23:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.166 (still bad) 2010-Mar-31 23:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.165 (still bad) 2010-Mar-31 23:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.166 (still bad) 2010-Mar-31 23:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.166 (still bad) 2010-Mar-31 23:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 23:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.163 (still bad) 2010-Mar-31 23:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.163 (still bad) 2010-Mar-31 23:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.163 (still bad) 2010-Mar-31 23:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.165 (still bad) 2010-Mar-31 23:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.167 (still bad) 2010-Mar-31 23:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.162 (still bad) 2010-Mar-31 23:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.163 (still bad) 2010-Mar-31 23:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.163 (still bad) 2010-Mar-31 23:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.172 (still bad) 2010-Mar-31 23:12:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.523 < 0.75)! 2010-Mar-31 23:12:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.164 1.011 0.977 2010-Mar-31 23:12:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.523 1.134 1.122 0.982 2010-Mar-31 23:12:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.878 1.153 0.989 2010-Mar-31 23:12:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.894 1.013 1.038 2010-Mar-31 23:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.163 (still bad) 2010-Mar-31 23:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.167 (still bad) 2010-Mar-31 23:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.167 (still bad) 2010-Mar-31 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.166 (still bad) 2010-Mar-31 23:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Mar-31 23:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.165 (still bad) 2010-Mar-31 23:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.165 (still bad) 2010-Mar-31 23:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.168 (still bad) 2010-Mar-31 23:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.165 (still bad) 2010-Mar-31 23:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.166 (still bad) 2010-Mar-31 23:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.173 (still bad) 2010-Mar-31 23:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.164 (still bad) 2010-Mar-31 23:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.163 (still bad) 2010-Mar-31 23:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.166 (still bad) 2010-Mar-31 23:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.165 (still bad) 2010-Mar-31 23:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.167 (still bad) 2010-Mar-31 23:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.166 (still bad) 2010-Mar-31 23:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.162 (still bad) 2010-Mar-31 23:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.163 (still bad) 2010-Mar-31 23:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.163 (still bad) 2010-Mar-31 23:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.173 (still bad) 2010-Mar-31 23:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.166 (still bad) 2010-Mar-31 23:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.164 (still bad) 2010-Mar-31 23:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.166 (still bad) 2010-Mar-31 23:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.163 (still bad) 2010-Mar-31 23:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.163 (still bad) 2010-Mar-31 23:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.165 (still bad) 2010-Mar-31 23:13:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Mar-31 23:13:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.162 1.008 0.976 2010-Mar-31 23:13:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.134 1.122 0.981 2010-Mar-31 23:13:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.877 1.150 0.989 2010-Mar-31 23:13:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.892 1.011 1.036 2010-Mar-31 23:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.164 (still bad) 2010-Mar-31 23:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.162 (still bad) 2010-Mar-31 23:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.164 (still bad) 2010-Mar-31 23:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Mar-31 23:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.165 (still bad) 2010-Mar-31 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.162 (still bad) 2010-Mar-31 23:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.165 (still bad) 2010-Mar-31 23:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.163 (still bad) 2010-Mar-31 23:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.167 (still bad) 2010-Mar-31 23:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.173 (still bad) 2010-Mar-31 23:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.166 (still bad) 2010-Mar-31 23:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.162 (still bad) 2010-Mar-31 23:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.166 (still bad) 2010-Mar-31 23:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.161 (still bad) 2010-Mar-31 23:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.164 (still bad) 2010-Mar-31 23:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.163 (still bad) 2010-Mar-31 23:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.162 (still bad) 2010-Mar-31 23:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.163 (still bad) 2010-Mar-31 23:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.166 (still bad) 2010-Mar-31 23:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.164 (still bad) 2010-Mar-31 23:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.162 (still bad) 2010-Mar-31 23:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.164 (still bad) 2010-Mar-31 23:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.164 (still bad) 2010-Mar-31 23:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 23:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.166 (still bad) 2010-Mar-31 23:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.163 (still bad) 2010-Mar-31 23:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.162 (still bad) 2010-Mar-31 23:14:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.518 < 0.75)! 2010-Mar-31 23:14:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.165 1.010 0.978 2010-Mar-31 23:14:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.518 1.132 1.126 0.983 2010-Mar-31 23:14:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.879 1.153 0.990 2010-Mar-31 23:14:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.896 1.012 1.041 2010-Mar-31 23:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.162 (still bad) 2010-Mar-31 23:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.164 (still bad) 2010-Mar-31 23:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.164 (still bad) 2010-Mar-31 23:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.163 (still bad) 2010-Mar-31 23:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.166 (still bad) 2010-Mar-31 23:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.164 (still bad) 2010-Mar-31 23:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.166 (still bad) 2010-Mar-31 23:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.167 (still bad) 2010-Mar-31 23:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.162 (still bad) 2010-Mar-31 23:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.164 (still bad) 2010-Mar-31 23:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.166 (still bad) 2010-Mar-31 23:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.167 (still bad) 2010-Mar-31 23:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.167 (still bad) 2010-Mar-31 23:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.167 (still bad) 2010-Mar-31 23:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.164 (still bad) 2010-Mar-31 23:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.163 (still bad) 2010-Mar-31 23:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.163 (still bad) 2010-Mar-31 23:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.166 (still bad) 2010-Mar-31 23:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.166 (still bad) 2010-Mar-31 23:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.168 (still bad) 2010-Mar-31 23:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.167 (still bad) 2010-Mar-31 23:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.168 (still bad) 2010-Mar-31 23:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.165 (still bad) 2010-Mar-31 23:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.168 (still bad) 2010-Mar-31 23:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.173 (still bad) 2010-Mar-31 23:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.586 and 1.166 (still bad) 2010-Mar-31 23:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.167 (still bad) 2010-Mar-31 23:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.531 < 0.75)! 2010-Mar-31 23:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.168 1.011 0.979 2010-Mar-31 23:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.531 1.133 1.122 0.982 2010-Mar-31 23:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.876 1.148 0.991 2010-Mar-31 23:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.895 1.010 1.040 2010-Mar-31 23:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.167 (still bad) 2010-Mar-31 23:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.167 (still bad) 2010-Mar-31 23:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.174 (still bad) 2010-Mar-31 23:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.167 (still bad) 2010-Mar-31 23:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.164 (still bad) 2010-Mar-31 23:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.165 (still bad) 2010-Mar-31 23:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.163 (still bad) 2010-Mar-31 23:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 23:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.167 (still bad) 2010-Mar-31 23:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.163 (still bad) 2010-Mar-31 23:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.165 (still bad) 2010-Mar-31 23:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.164 (still bad) 2010-Mar-31 23:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.164 (still bad) 2010-Mar-31 23:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.167 (still bad) 2010-Mar-31 23:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.167 (still bad) 2010-Mar-31 23:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.164 (still bad) 2010-Mar-31 23:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.165 (still bad) 2010-Mar-31 23:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.165 (still bad) 2010-Mar-31 23:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.166 (still bad) 2010-Mar-31 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.169 (still bad) 2010-Mar-31 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.166 (still bad) 2010-Mar-31 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.165 (still bad) 2010-Mar-31 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.167 (still bad) 2010-Mar-31 23:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.165 (still bad) 2010-Mar-31 23:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.167 (still bad) 2010-Mar-31 23:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.168 (still bad) 2010-Mar-31 23:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.501 < 0.75)! 2010-Mar-31 23:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.170 1.006 0.977 2010-Mar-31 23:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.501 1.133 1.122 0.982 2010-Mar-31 23:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.877 1.146 0.991 2010-Mar-31 23:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.895 1.009 1.038 2010-Mar-31 23:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.170 (still bad) 2010-Mar-31 23:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.172 (still bad) 2010-Mar-31 23:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.171 (still bad) 2010-Mar-31 23:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.169 (still bad) 2010-Mar-31 23:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.165 (still bad) 2010-Mar-31 23:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.172 (still bad) 2010-Mar-31 23:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.171 (still bad) 2010-Mar-31 23:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.166 (still bad) 2010-Mar-31 23:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.166 (still bad) 2010-Mar-31 23:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.166 (still bad) 2010-Mar-31 23:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.166 (still bad) 2010-Mar-31 23:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.170 (still bad) 2010-Mar-31 23:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.166 (still bad) 2010-Mar-31 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.171 (still bad) 2010-Mar-31 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.167 (still bad) 2010-Mar-31 23:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.169 (still bad) 2010-Mar-31 23:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.168 (still bad) 2010-Mar-31 23:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Mar-31 23:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.167 (still bad) 2010-Mar-31 23:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.167 (still bad) 2010-Mar-31 23:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.169 (still bad) 2010-Mar-31 23:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.166 (still bad) 2010-Mar-31 23:17:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.503 < 0.75)! 2010-Mar-31 23:17:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.169 1.008 0.981 2010-Mar-31 23:17:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.503 1.134 1.120 0.983 2010-Mar-31 23:17:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.879 1.148 0.994 2010-Mar-31 23:17:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.904 1.017 1.051 2010-Mar-31 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.174 (still bad) 2010-Mar-31 23:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.167 (still bad) 2010-Mar-31 23:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.166 (still bad) 2010-Mar-31 23:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.169 (still bad) 2010-Mar-31 23:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.167 (still bad) 2010-Mar-31 23:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.168 (still bad) 2010-Mar-31 23:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.176 (still bad) 2010-Mar-31 23:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.168 (still bad) 2010-Mar-31 23:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.168 (still bad) 2010-Mar-31 23:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Mar-31 23:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.168 (still bad) 2010-Mar-31 23:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.166 (still bad) 2010-Mar-31 23:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.167 (still bad) 2010-Mar-31 23:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.166 (still bad) 2010-Mar-31 23:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.170 (still bad) 2010-Mar-31 23:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.178 (still bad) 2010-Mar-31 23:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.170 (still bad) 2010-Mar-31 23:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.167 (still bad) 2010-Mar-31 23:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.176 (still bad) 2010-Mar-31 23:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.166 (still bad) 2010-Mar-31 23:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.166 (still bad) 2010-Mar-31 23:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.165 (still bad) 2010-Mar-31 23:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.503 < 0.75)! 2010-Mar-31 23:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.166 1.006 0.977 2010-Mar-31 23:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.503 1.136 1.124 0.987 2010-Mar-31 23:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.881 1.150 0.993 2010-Mar-31 23:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.894 1.008 1.037 2010-Mar-31 23:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Mar-31 23:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.168 (still bad) 2010-Mar-31 23:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.166 (still bad) 2010-Mar-31 23:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.168 (still bad) 2010-Mar-31 23:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.178 (still bad) 2010-Mar-31 23:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.170 (still bad) 2010-Mar-31 23:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.169 (still bad) 2010-Mar-31 23:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.170 (still bad) 2010-Mar-31 23:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Mar-31 23:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.170 (still bad) 2010-Mar-31 23:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.170 (still bad) 2010-Mar-31 23:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.167 (still bad) 2010-Mar-31 23:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.167 (still bad) 2010-Mar-31 23:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.178 (still bad) 2010-Mar-31 23:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.167 (still bad) 2010-Mar-31 23:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.167 (still bad) 2010-Mar-31 23:19:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:19:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:19:38 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:19:38 LOG5 end_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 LOG1 fixed_driftmap: New position: year = 2010.2490676730802 RA = 11:56:33.9 RA/Dec = 11:57:07.8 +19:17:04.2 2010-Mar-31 23:19:38 NOTE fixed_driftmap: Correcting ZA to 6:26:44.0 ... 2010-Mar-31 23:19:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4455641165 -CF 2010-Mar-31 23:19:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:19:38 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:19:38 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:19:38 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:19:38 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:19:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:19:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:19:38 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:19:38 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4455641165 -CF 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:19:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:19:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:19:38 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2010-Mar-31 23:19:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:19:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:19:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:19:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:19:38 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:19:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:19:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:19:39 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:19:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:19:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:19:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:19:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:19:39 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:19:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:19:39 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:19:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:19:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:19:39 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:19:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:19:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:19:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:19:39 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:19:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:19:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:19:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:19:39 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:19:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:19:39 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:19:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:19:39 INFO2 take_data: Starting WAPP 1-second scan: 9000107 2010-Mar-31 23:19:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:19:39 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Mar-31 23:19:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:19:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:19:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11980.00 2010-Mar-31 23:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.167 (still bad) 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:19:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:19:41 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:19:41 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 23:19:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 23:19:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 23:19:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:19:41 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:19:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 23:19:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:19:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:19:41 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 23:19:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 23:19:41 LOG5 finish_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 23:19:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 23:19:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 23:19:41 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Mar-31 23:19:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2010-Mar-31 23:19:41 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2010-Mar-31 23:19:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:19:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:19:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:19:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:19:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 23:19:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 23:19:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:19:42 LOG5 begin_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2010-Mar-31 23:19:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 23:19:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:19:42 INFO2 take_data: Starting WAPP 600-second scan: 9000108 2010-Mar-31 23:19:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:19:42 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Mar-31 23:19:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 23:19:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:19:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 23:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.670 and 1.602 (still bad) 2010-Mar-31 23:19:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11983.00 2010-Mar-31 23:19:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0024.fits 2010-Mar-31 23:19:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0024.fits} 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.168 (still bad) 2010-Mar-31 23:19:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 23:19:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.177 1.011 0.982 2010-Mar-31 23:19:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.144 1.124 0.989 2010-Mar-31 23:19:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.886 1.156 1.001 2010-Mar-31 23:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.903 1.015 1.050 2010-Mar-31 23:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.166 (still bad) 2010-Mar-31 23:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.179 (still bad) 2010-Mar-31 23:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.168 (still bad) 2010-Mar-31 23:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.167 (still bad) 2010-Mar-31 23:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.168 (still bad) 2010-Mar-31 23:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.166 (still bad) 2010-Mar-31 23:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.167 (still bad) 2010-Mar-31 23:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.168 (still bad) 2010-Mar-31 23:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.166 (still bad) 2010-Mar-31 23:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.169 (still bad) 2010-Mar-31 23:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.178 (still bad) 2010-Mar-31 23:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.169 (still bad) 2010-Mar-31 23:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.169 (still bad) 2010-Mar-31 23:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.170 (still bad) 2010-Mar-31 23:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Mar-31 23:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.167 (still bad) 2010-Mar-31 23:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.167 (still bad) 2010-Mar-31 23:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.168 (still bad) 2010-Mar-31 23:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:20:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Mar-31 23:20:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.177 1.013 0.984 2010-Mar-31 23:20:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.142 1.124 0.989 2010-Mar-31 23:20:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.882 1.150 0.995 2010-Mar-31 23:20:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.899 1.011 1.042 2010-Mar-31 23:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.169 (still bad) 2010-Mar-31 23:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.172 (still bad) 2010-Mar-31 23:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Mar-31 23:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Mar-31 23:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.169 (still bad) 2010-Mar-31 23:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 23:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.173 (still bad) 2010-Mar-31 23:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.171 (still bad) 2010-Mar-31 23:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.175 (still bad) 2010-Mar-31 23:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.176 (still bad) 2010-Mar-31 23:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.173 (still bad) 2010-Mar-31 23:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Mar-31 23:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.175 (still bad) 2010-Mar-31 23:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.179 (still bad) 2010-Mar-31 23:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.180 (still bad) 2010-Mar-31 23:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.184 (still bad) 2010-Mar-31 23:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.181 (still bad) 2010-Mar-31 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.180 (still bad) 2010-Mar-31 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.178 (still bad) 2010-Mar-31 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.176 (still bad) 2010-Mar-31 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.176 (still bad) 2010-Mar-31 23:21:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 23:21:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.176 1.009 0.982 2010-Mar-31 23:21:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.140 1.121 0.985 2010-Mar-31 23:21:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.134 0.895 1.147 0.996 2010-Mar-31 23:21:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.904 1.016 1.050 2010-Mar-31 23:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Mar-31 23:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.173 (still bad) 2010-Mar-31 23:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.174 (still bad) 2010-Mar-31 23:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.168 (still bad) 2010-Mar-31 23:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.167 (still bad) 2010-Mar-31 23:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.179 (still bad) 2010-Mar-31 23:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.180 (still bad) 2010-Mar-31 23:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 23:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.170 1.006 0.979 2010-Mar-31 23:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.135 1.119 0.984 2010-Mar-31 23:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.882 1.148 0.994 2010-Mar-31 23:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.898 1.010 1.042 2010-Mar-31 23:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.179 (still bad) 2010-Mar-31 23:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.171 (still bad) 2010-Mar-31 23:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Mar-31 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.180 (still bad) 2010-Mar-31 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.172 (still bad) 2010-Mar-31 23:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.173 (still bad) 2010-Mar-31 23:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.171 (still bad) 2010-Mar-31 23:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.176 (still bad) 2010-Mar-31 23:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.184 (still bad) 2010-Mar-31 23:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 23:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Mar-31 23:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.175 (still bad) 2010-Mar-31 23:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.173 (still bad) 2010-Mar-31 23:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.182 (still bad) 2010-Mar-31 23:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.173 (still bad) 2010-Mar-31 23:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.172 (still bad) 2010-Mar-31 23:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.173 (still bad) 2010-Mar-31 23:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.182 (still bad) 2010-Mar-31 23:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:23:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Mar-31 23:23:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.171 1.007 0.979 2010-Mar-31 23:23:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.135 1.121 0.983 2010-Mar-31 23:23:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.884 1.154 1.002 2010-Mar-31 23:23:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.897 1.009 1.042 2010-Mar-31 23:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 23:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.180 (still bad) 2010-Mar-31 23:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 23:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.179 (still bad) 2010-Mar-31 23:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Mar-31 23:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.172 (still bad) 2010-Mar-31 23:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 23:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.170 (still bad) 2010-Mar-31 23:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.171 (still bad) 2010-Mar-31 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.168 (still bad) 2010-Mar-31 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.172 (still bad) 2010-Mar-31 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.168 (still bad) 2010-Mar-31 23:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.168 (still bad) 2010-Mar-31 23:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.168 (still bad) 2010-Mar-31 23:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.169 (still bad) 2010-Mar-31 23:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.169 (still bad) 2010-Mar-31 23:24:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.506 < 0.75)! 2010-Mar-31 23:24:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.170 1.007 0.981 2010-Mar-31 23:24:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.506 1.138 1.123 0.987 2010-Mar-31 23:24:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.883 1.148 0.996 2010-Mar-31 23:24:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.896 1.011 1.042 2010-Mar-31 23:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.167 (still bad) 2010-Mar-31 23:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.168 (still bad) 2010-Mar-31 23:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.169 (still bad) 2010-Mar-31 23:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 23:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.175 (still bad) 2010-Mar-31 23:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.178 (still bad) 2010-Mar-31 23:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.179 (still bad) 2010-Mar-31 23:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.180 (still bad) 2010-Mar-31 23:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.181 (still bad) 2010-Mar-31 23:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.181 (still bad) 2010-Mar-31 23:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.180 (still bad) 2010-Mar-31 23:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.179 (still bad) 2010-Mar-31 23:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.176 (still bad) 2010-Mar-31 23:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.168 (still bad) 2010-Mar-31 23:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.169 (still bad) 2010-Mar-31 23:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Mar-31 23:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.169 1.006 0.982 2010-Mar-31 23:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.135 1.120 0.984 2010-Mar-31 23:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.881 1.152 0.998 2010-Mar-31 23:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.898 1.009 1.042 2010-Mar-31 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.170 (still bad) 2010-Mar-31 23:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.176 (still bad) 2010-Mar-31 23:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.168 (still bad) 2010-Mar-31 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.172 (still bad) 2010-Mar-31 23:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.172 (still bad) 2010-Mar-31 23:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Mar-31 23:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.168 (still bad) 2010-Mar-31 23:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.170 (still bad) 2010-Mar-31 23:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.171 (still bad) 2010-Mar-31 23:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.169 (still bad) 2010-Mar-31 23:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.177 (still bad) 2010-Mar-31 23:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.170 (still bad) 2010-Mar-31 23:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 23:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.169 (still bad) 2010-Mar-31 23:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.175 (still bad) 2010-Mar-31 23:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.167 (still bad) 2010-Mar-31 23:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.168 (still bad) 2010-Mar-31 23:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.167 (still bad) 2010-Mar-31 23:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:26:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.501 < 0.75)! 2010-Mar-31 23:26:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.167 1.004 0.980 2010-Mar-31 23:26:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.501 1.135 1.122 0.985 2010-Mar-31 23:26:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.884 1.146 0.994 2010-Mar-31 23:26:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.897 1.009 1.043 2010-Mar-31 23:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.167 (still bad) 2010-Mar-31 23:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 23:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.169 (still bad) 2010-Mar-31 23:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.173 (still bad) 2010-Mar-31 23:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.172 (still bad) 2010-Mar-31 23:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.175 (still bad) 2010-Mar-31 23:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.174 (still bad) 2010-Mar-31 23:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.170 (still bad) 2010-Mar-31 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.173 (still bad) 2010-Mar-31 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.168 (still bad) 2010-Mar-31 23:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.168 (still bad) 2010-Mar-31 23:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.177 (still bad) 2010-Mar-31 23:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.166 (still bad) 2010-Mar-31 23:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.173 (still bad) 2010-Mar-31 23:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.166 (still bad) 2010-Mar-31 23:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.165 (still bad) 2010-Mar-31 23:27:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.515 < 0.75)! 2010-Mar-31 23:27:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.168 1.006 0.979 2010-Mar-31 23:27:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.515 1.137 1.119 0.985 2010-Mar-31 23:27:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.883 1.151 0.998 2010-Mar-31 23:27:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.898 1.010 1.043 2010-Mar-31 23:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Mar-31 23:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Mar-31 23:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.173 (still bad) 2010-Mar-31 23:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.168 (still bad) 2010-Mar-31 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.167 (still bad) 2010-Mar-31 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.168 (still bad) 2010-Mar-31 23:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.174 (still bad) 2010-Mar-31 23:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.174 (still bad) 2010-Mar-31 23:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.169 (still bad) 2010-Mar-31 23:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Mar-31 23:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.169 (still bad) 2010-Mar-31 23:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Mar-31 23:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.174 (still bad) 2010-Mar-31 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Mar-31 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Mar-31 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.174 (still bad) 2010-Mar-31 23:28:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 23:28:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.174 1.010 0.984 2010-Mar-31 23:28:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.141 1.124 0.988 2010-Mar-31 23:28:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.885 1.151 0.999 2010-Mar-31 23:28:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.899 1.011 1.044 2010-Mar-31 23:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.175 (still bad) 2010-Mar-31 23:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.173 (still bad) 2010-Mar-31 23:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Mar-31 23:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.173 (still bad) 2010-Mar-31 23:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.178 (still bad) 2010-Mar-31 23:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.169 (still bad) 2010-Mar-31 23:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Mar-31 23:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.176 (still bad) 2010-Mar-31 23:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.171 (still bad) 2010-Mar-31 23:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.173 (still bad) 2010-Mar-31 23:29:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:29:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:29:43 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:29:43 LOG5 end_task: Level: (2) ID = <10306> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 LOG1 fixed_driftmap: New position: year = 2010.2490868443733 RA = 12:06:40.3 RA/Dec = 12:07:14.0 +19:17:03.8 2010-Mar-31 23:29:43 NOTE fixed_driftmap: Correcting ZA to 6:26:41.4 ... 2010-Mar-31 23:29:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4448247752 -CF 2010-Mar-31 23:29:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:29:43 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:29:43 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:29:43 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:29:43 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:29:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:29:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:29:43 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:29:43 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4448247752 -CF 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:29:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:29:43 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:29:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:29:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:29:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:29:43 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Mar-31 23:29:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:29:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:29:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:29:44 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:29:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:29:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:29:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:29:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:29:44 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:29:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:29:44 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:29:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:29:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:29:44 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:29:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:29:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:29:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:29:44 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:29:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:29:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:29:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:29:44 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:29:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:29:44 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:29:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:29:44 INFO2 take_data: Starting WAPP 1-second scan: 9000109 2010-Mar-31 23:29:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:29:44 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Mar-31 23:29:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:29:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:29:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12585.00 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:29:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:29:46 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:29:46 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 23:29:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 23:29:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 23:29:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:29:46 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:29:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 23:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.691 and 1.608 (still bad) 2010-Mar-31 23:29:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:29:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:29:46 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 23:29:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 23:29:46 LOG5 finish_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 23:29:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 23:29:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 23:29:46 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Mar-31 23:29:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2010-Mar-31 23:29:46 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2010-Mar-31 23:29:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:29:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:29:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:29:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:29:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 23:29:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 23:29:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:29:47 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2010-Mar-31 23:29:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 23:29:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:29:47 INFO2 take_data: Starting WAPP 600-second scan: 9000110 2010-Mar-31 23:29:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:29:47 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Mar-31 23:29:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 23:29:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:29:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 23:29:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12588.00 2010-Mar-31 23:29:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0025.fits 2010-Mar-31 23:29:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0025.fits} 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Mar-31 23:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:29:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 23:29:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.180 1.012 0.988 2010-Mar-31 23:29:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.144 1.126 0.990 2010-Mar-31 23:29:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.886 1.155 1.001 2010-Mar-31 23:29:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.903 1.015 1.047 2010-Mar-31 23:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 23:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.169 (still bad) 2010-Mar-31 23:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.180 (still bad) 2010-Mar-31 23:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Mar-31 23:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.171 (still bad) 2010-Mar-31 23:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.174 (still bad) 2010-Mar-31 23:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.179 (still bad) 2010-Mar-31 23:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.169 (still bad) 2010-Mar-31 23:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Mar-31 23:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.174 (still bad) 2010-Mar-31 23:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.172 (still bad) 2010-Mar-31 23:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.179 (still bad) 2010-Mar-31 23:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Mar-31 23:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Mar-31 23:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.173 (still bad) 2010-Mar-31 23:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.176 (still bad) 2010-Mar-31 23:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.169 (still bad) 2010-Mar-31 23:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.168 (still bad) 2010-Mar-31 23:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.169 (still bad) 2010-Mar-31 23:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Mar-31 23:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 23:31:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 23:31:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.171 1.008 0.982 2010-Mar-31 23:31:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.142 1.120 0.986 2010-Mar-31 23:31:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.884 1.152 0.998 2010-Mar-31 23:31:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.897 1.010 1.041 2010-Mar-31 23:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.174 (still bad) 2010-Mar-31 23:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.168 (still bad) 2010-Mar-31 23:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.167 (still bad) 2010-Mar-31 23:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.169 (still bad) 2010-Mar-31 23:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Mar-31 23:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.175 (still bad) 2010-Mar-31 23:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.168 (still bad) 2010-Mar-31 23:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Mar-31 23:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.165 (still bad) 2010-Mar-31 23:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.171 (still bad) 2010-Mar-31 23:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.169 (still bad) 2010-Mar-31 23:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.172 (still bad) 2010-Mar-31 23:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.169 (still bad) 2010-Mar-31 23:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Mar-31 23:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.175 (still bad) 2010-Mar-31 23:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.173 (still bad) 2010-Mar-31 23:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.171 (still bad) 2010-Mar-31 23:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.169 (still bad) 2010-Mar-31 23:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.172 (still bad) 2010-Mar-31 23:32:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.520 < 0.75)! 2010-Mar-31 23:32:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.173 1.009 0.982 2010-Mar-31 23:32:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.520 1.137 1.125 0.988 2010-Mar-31 23:32:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.883 1.154 1.000 2010-Mar-31 23:32:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.896 1.011 1.040 2010-Mar-31 23:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.170 (still bad) 2010-Mar-31 23:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Mar-31 23:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 23:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Mar-31 23:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.170 (still bad) 2010-Mar-31 23:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.174 (still bad) 2010-Mar-31 23:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.172 (still bad) 2010-Mar-31 23:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Mar-31 23:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.170 (still bad) 2010-Mar-31 23:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.168 (still bad) 2010-Mar-31 23:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.176 (still bad) 2010-Mar-31 23:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.169 (still bad) 2010-Mar-31 23:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.168 (still bad) 2010-Mar-31 23:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.169 (still bad) 2010-Mar-31 23:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.170 (still bad) 2010-Mar-31 23:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.179 (still bad) 2010-Mar-31 23:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.168 (still bad) 2010-Mar-31 23:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.169 (still bad) 2010-Mar-31 23:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Mar-31 23:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.179 (still bad) 2010-Mar-31 23:33:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.519 < 0.75)! 2010-Mar-31 23:33:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.170 1.009 0.982 2010-Mar-31 23:33:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.519 1.138 1.122 0.984 2010-Mar-31 23:33:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.884 1.152 0.998 2010-Mar-31 23:33:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.894 1.009 1.040 2010-Mar-31 23:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Mar-31 23:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Mar-31 23:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.169 (still bad) 2010-Mar-31 23:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.177 (still bad) 2010-Mar-31 23:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.173 (still bad) 2010-Mar-31 23:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.172 (still bad) 2010-Mar-31 23:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.171 (still bad) 2010-Mar-31 23:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.172 (still bad) 2010-Mar-31 23:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.180 (still bad) 2010-Mar-31 23:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Mar-31 23:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.176 (still bad) 2010-Mar-31 23:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Mar-31 23:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.181 (still bad) 2010-Mar-31 23:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.174 (still bad) 2010-Mar-31 23:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.172 (still bad) 2010-Mar-31 23:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.173 (still bad) 2010-Mar-31 23:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.174 (still bad) 2010-Mar-31 23:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.182 (still bad) 2010-Mar-31 23:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.175 (still bad) 2010-Mar-31 23:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.176 (still bad) 2010-Mar-31 23:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.173 (still bad) 2010-Mar-31 23:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.174 (still bad) 2010-Mar-31 23:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.182 (still bad) 2010-Mar-31 23:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:34:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.531 < 0.75)! 2010-Mar-31 23:34:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.176 1.008 0.981 2010-Mar-31 23:34:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.531 1.139 1.125 0.987 2010-Mar-31 23:34:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.885 1.152 0.999 2010-Mar-31 23:34:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.897 1.012 1.041 2010-Mar-31 23:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.179 (still bad) 2010-Mar-31 23:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.180 (still bad) 2010-Mar-31 23:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.181 (still bad) 2010-Mar-31 23:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.190 (still bad) 2010-Mar-31 23:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.181 (still bad) 2010-Mar-31 23:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.180 (still bad) 2010-Mar-31 23:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.178 (still bad) 2010-Mar-31 23:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.176 (still bad) 2010-Mar-31 23:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.182 (still bad) 2010-Mar-31 23:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.173 (still bad) 2010-Mar-31 23:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.175 (still bad) 2010-Mar-31 23:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.176 (still bad) 2010-Mar-31 23:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.180 (still bad) 2010-Mar-31 23:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.189 (still bad) 2010-Mar-31 23:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.183 (still bad) 2010-Mar-31 23:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.183 (still bad) 2010-Mar-31 23:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.186 (still bad) 2010-Mar-31 23:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.185 (still bad) 2010-Mar-31 23:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.184 (still bad) 2010-Mar-31 23:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.191 (still bad) 2010-Mar-31 23:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.179 (still bad) 2010-Mar-31 23:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.179 (still bad) 2010-Mar-31 23:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Mar-31 23:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.175 (still bad) 2010-Mar-31 23:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.184 (still bad) 2010-Mar-31 23:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.176 (still bad) 2010-Mar-31 23:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.174 (still bad) 2010-Mar-31 23:35:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.512 < 0.75)! 2010-Mar-31 23:35:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.176 1.013 0.988 2010-Mar-31 23:35:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.512 1.152 1.130 0.991 2010-Mar-31 23:35:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.887 1.161 1.007 2010-Mar-31 23:35:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.897 1.015 1.044 2010-Mar-31 23:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.174 (still bad) 2010-Mar-31 23:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.184 (still bad) 2010-Mar-31 23:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.177 (still bad) 2010-Mar-31 23:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.174 (still bad) 2010-Mar-31 23:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.177 (still bad) 2010-Mar-31 23:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.175 (still bad) 2010-Mar-31 23:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.176 (still bad) 2010-Mar-31 23:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.184 (still bad) 2010-Mar-31 23:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.176 (still bad) 2010-Mar-31 23:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.180 (still bad) 2010-Mar-31 23:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.198 (still bad) 2010-Mar-31 23:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.213 (still bad) 2010-Mar-31 23:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.231 (still bad) 2010-Mar-31 23:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.225 (still bad) 2010-Mar-31 23:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.218 (still bad) 2010-Mar-31 23:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.208 (still bad) 2010-Mar-31 23:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.187 (still bad) 2010-Mar-31 23:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.183 (still bad) 2010-Mar-31 23:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.192 (still bad) 2010-Mar-31 23:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.184 (still bad) 2010-Mar-31 23:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.183 (still bad) 2010-Mar-31 23:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.214 (still bad) 2010-Mar-31 23:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.249 (still bad) 2010-Mar-31 23:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.278 (still bad) 2010-Mar-31 23:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.298 (still bad) 2010-Mar-31 23:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.299 (still bad) 2010-Mar-31 23:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.285 (still bad) 2010-Mar-31 23:36:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 23:36:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.177 1.009 0.983 2010-Mar-31 23:36:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.141 1.125 0.985 2010-Mar-31 23:36:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.261 0.992 1.159 1.003 2010-Mar-31 23:36:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.900 1.015 1.046 2010-Mar-31 23:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.230 (still bad) 2010-Mar-31 23:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.194 (still bad) 2010-Mar-31 23:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.178 (still bad) 2010-Mar-31 23:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.172 (still bad) 2010-Mar-31 23:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.172 (still bad) 2010-Mar-31 23:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 23:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.173 (still bad) 2010-Mar-31 23:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 23:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.174 (still bad) 2010-Mar-31 23:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.172 (still bad) 2010-Mar-31 23:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.171 (still bad) 2010-Mar-31 23:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.173 (still bad) 2010-Mar-31 23:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.179 (still bad) 2010-Mar-31 23:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.176 (still bad) 2010-Mar-31 23:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Mar-31 23:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.175 (still bad) 2010-Mar-31 23:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.171 (still bad) 2010-Mar-31 23:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.175 (still bad) 2010-Mar-31 23:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.174 (still bad) 2010-Mar-31 23:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Mar-31 23:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.171 (still bad) 2010-Mar-31 23:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.173 (still bad) 2010-Mar-31 23:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.173 (still bad) 2010-Mar-31 23:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.172 (still bad) 2010-Mar-31 23:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.173 (still bad) 2010-Mar-31 23:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.173 (still bad) 2010-Mar-31 23:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.170 (still bad) 2010-Mar-31 23:37:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 23:37:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.174 1.010 0.983 2010-Mar-31 23:37:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.142 1.126 0.986 2010-Mar-31 23:37:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.886 1.152 0.999 2010-Mar-31 23:37:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.899 1.015 1.043 2010-Mar-31 23:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Mar-31 23:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Mar-31 23:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.173 (still bad) 2010-Mar-31 23:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Mar-31 23:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.167 (still bad) 2010-Mar-31 23:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.169 (still bad) 2010-Mar-31 23:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.170 (still bad) 2010-Mar-31 23:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.179 (still bad) 2010-Mar-31 23:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.168 (still bad) 2010-Mar-31 23:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Mar-31 23:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.181 (still bad) 2010-Mar-31 23:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Mar-31 23:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.169 (still bad) 2010-Mar-31 23:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.172 (still bad) 2010-Mar-31 23:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.181 (still bad) 2010-Mar-31 23:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.172 (still bad) 2010-Mar-31 23:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.172 (still bad) 2010-Mar-31 23:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.169 (still bad) 2010-Mar-31 23:38:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.522 < 0.75)! 2010-Mar-31 23:38:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.172 1.010 0.983 2010-Mar-31 23:38:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.522 1.141 1.129 0.987 2010-Mar-31 23:38:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.884 1.154 0.998 2010-Mar-31 23:38:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.899 1.012 1.044 2010-Mar-31 23:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.180 (still bad) 2010-Mar-31 23:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.171 (still bad) 2010-Mar-31 23:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.169 (still bad) 2010-Mar-31 23:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.169 (still bad) 2010-Mar-31 23:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.169 (still bad) 2010-Mar-31 23:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.181 (still bad) 2010-Mar-31 23:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.170 (still bad) 2010-Mar-31 23:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.171 (still bad) 2010-Mar-31 23:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.170 (still bad) 2010-Mar-31 23:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.170 (still bad) 2010-Mar-31 23:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.179 (still bad) 2010-Mar-31 23:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.171 (still bad) 2010-Mar-31 23:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.168 (still bad) 2010-Mar-31 23:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 23:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.168 (still bad) 2010-Mar-31 23:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.167 (still bad) 2010-Mar-31 23:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.170 (still bad) 2010-Mar-31 23:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.169 (still bad) 2010-Mar-31 23:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.169 (still bad) 2010-Mar-31 23:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.170 (still bad) 2010-Mar-31 23:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.169 (still bad) 2010-Mar-31 23:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.177 (still bad) 2010-Mar-31 23:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.168 (still bad) 2010-Mar-31 23:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.166 (still bad) 2010-Mar-31 23:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:39:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 23:39:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.170 1.007 0.980 2010-Mar-31 23:39:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.136 1.125 0.986 2010-Mar-31 23:39:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.883 1.151 0.996 2010-Mar-31 23:39:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.900 1.012 1.042 2010-Mar-31 23:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.184 (still bad) 2010-Mar-31 23:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.175 (still bad) 2010-Mar-31 23:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.172 (still bad) 2010-Mar-31 23:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.169 (still bad) 2010-Mar-31 23:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.171 (still bad) 2010-Mar-31 23:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.171 (still bad) 2010-Mar-31 23:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.169 (still bad) 2010-Mar-31 23:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.169 (still bad) 2010-Mar-31 23:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.168 (still bad) 2010-Mar-31 23:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.177 (still bad) 2010-Mar-31 23:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.181 (still bad) 2010-Mar-31 23:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.179 (still bad) 2010-Mar-31 23:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.181 (still bad) 2010-Mar-31 23:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.181 (still bad) 2010-Mar-31 23:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.177 (still bad) 2010-Mar-31 23:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.635 and 1.172 (still bad) 2010-Mar-31 23:39:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:39:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:39:48 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:39:48 LOG5 end_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG1 fixed_driftmap: New position: year = 2010.2491060156665 RA = 12:16:47.0 RA/Dec = 12:17:20.5 +19:17:03.9 2010-Mar-31 23:39:48 NOTE fixed_driftmap: Correcting ZA to 6:26:42.0 ... 2010-Mar-31 23:39:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4449926648 -CF 2010-Mar-31 23:39:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:39:48 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:39:48 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:39:48 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:39:48 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:39:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:39:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:39:48 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:39:48 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4449926648 -CF 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.170 (still bad) 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:39:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:39:48 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:39:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:39:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:39:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:39:48 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Mar-31 23:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:39:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:39:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:39:49 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:39:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:39:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:39:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:39:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:39:49 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:39:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:39:49 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:39:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:39:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:39:49 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:39:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:39:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:39:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:39:49 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:39:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:39:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:39:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:39:49 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:39:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:39:49 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:39:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:39:49 INFO2 take_data: Starting WAPP 1-second scan: 9000111 2010-Mar-31 23:39:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:39:49 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Mar-31 23:39:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:39:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:39:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13190.00 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:39:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:39:51 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:39:51 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 23:39:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 23:39:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 23:39:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:39:51 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:39:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 23:39:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:39:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:39:51 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 23:39:51 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 23:39:51 LOG5 finish_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 23:39:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 23:39:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 23:39:51 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Mar-31 23:39:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2010-Mar-31 23:39:51 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2010-Mar-31 23:39:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:39:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:39:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:39:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:39:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 23:39:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 23:39:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:39:52 LOG5 begin_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2010-Mar-31 23:39:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 23:39:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:39:52 INFO2 take_data: Starting WAPP 600-second scan: 9000112 2010-Mar-31 23:39:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:39:52 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Mar-31 23:39:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 23:39:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.601 2010-Mar-31 23:39:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:39:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 23:39:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0026.fits 2010-Mar-31 23:39:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13193.00 2010-Mar-31 23:39:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0026.fits} 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:39:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.521 < 0.75)! 2010-Mar-31 23:39:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.167 1.006 0.980 2010-Mar-31 23:39:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.521 1.135 1.124 0.985 2010-Mar-31 23:39:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.881 1.154 0.999 2010-Mar-31 23:39:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.896 1.012 1.039 2010-Mar-31 23:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.167 (still bad) 2010-Mar-31 23:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.174 (still bad) 2010-Mar-31 23:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Mar-31 23:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.168 (still bad) 2010-Mar-31 23:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.169 (still bad) 2010-Mar-31 23:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.167 (still bad) 2010-Mar-31 23:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.169 (still bad) 2010-Mar-31 23:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.171 (still bad) 2010-Mar-31 23:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.169 (still bad) 2010-Mar-31 23:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.166 (still bad) 2010-Mar-31 23:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.169 (still bad) 2010-Mar-31 23:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.171 (still bad) 2010-Mar-31 23:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.169 (still bad) 2010-Mar-31 23:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.167 (still bad) 2010-Mar-31 23:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.167 (still bad) 2010-Mar-31 23:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.166 (still bad) 2010-Mar-31 23:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.166 (still bad) 2010-Mar-31 23:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.171 (still bad) 2010-Mar-31 23:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.168 (still bad) 2010-Mar-31 23:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.165 (still bad) 2010-Mar-31 23:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.168 (still bad) 2010-Mar-31 23:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.167 (still bad) 2010-Mar-31 23:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.173 (still bad) 2010-Mar-31 23:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.172 (still bad) 2010-Mar-31 23:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.167 (still bad) 2010-Mar-31 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 23:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.169 (still bad) 2010-Mar-31 23:40:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.530 < 0.75)! 2010-Mar-31 23:40:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.171 1.007 0.982 2010-Mar-31 23:40:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.530 1.137 1.125 0.985 2010-Mar-31 23:40:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.883 1.153 0.998 2010-Mar-31 23:40:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.899 1.012 1.043 2010-Mar-31 23:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.177 (still bad) 2010-Mar-31 23:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.166 (still bad) 2010-Mar-31 23:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.167 (still bad) 2010-Mar-31 23:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.168 (still bad) 2010-Mar-31 23:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.167 (still bad) 2010-Mar-31 23:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.176 (still bad) 2010-Mar-31 23:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.170 (still bad) 2010-Mar-31 23:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 23:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.167 (still bad) 2010-Mar-31 23:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.173 (still bad) 2010-Mar-31 23:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.169 (still bad) 2010-Mar-31 23:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Mar-31 23:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Mar-31 23:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.173 (still bad) 2010-Mar-31 23:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.175 (still bad) 2010-Mar-31 23:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.173 (still bad) 2010-Mar-31 23:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Mar-31 23:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.173 (still bad) 2010-Mar-31 23:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.175 (still bad) 2010-Mar-31 23:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.170 (still bad) 2010-Mar-31 23:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.171 (still bad) 2010-Mar-31 23:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.526 < 0.75)! 2010-Mar-31 23:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.173 1.012 0.983 2010-Mar-31 23:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.526 1.142 1.125 0.987 2010-Mar-31 23:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.884 1.155 0.999 2010-Mar-31 23:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.901 1.013 1.044 2010-Mar-31 23:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.174 (still bad) 2010-Mar-31 23:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.172 (still bad) 2010-Mar-31 23:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.173 (still bad) 2010-Mar-31 23:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.170 (still bad) 2010-Mar-31 23:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.176 (still bad) 2010-Mar-31 23:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.173 (still bad) 2010-Mar-31 23:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.169 (still bad) 2010-Mar-31 23:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.170 (still bad) 2010-Mar-31 23:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.173 (still bad) 2010-Mar-31 23:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.171 (still bad) 2010-Mar-31 23:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.173 (still bad) 2010-Mar-31 23:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.173 (still bad) 2010-Mar-31 23:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.171 (still bad) 2010-Mar-31 23:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.172 (still bad) 2010-Mar-31 23:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.178 (still bad) 2010-Mar-31 23:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.174 (still bad) 2010-Mar-31 23:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.175 (still bad) 2010-Mar-31 23:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.541 and 1.180 (still bad) 2010-Mar-31 23:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.177 (still bad) 2010-Mar-31 23:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.172 (still bad) 2010-Mar-31 23:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.181 (still bad) 2010-Mar-31 23:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.173 (still bad) 2010-Mar-31 23:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.173 (still bad) 2010-Mar-31 23:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.175 (still bad) 2010-Mar-31 23:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.177 (still bad) 2010-Mar-31 23:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.532 < 0.75)! 2010-Mar-31 23:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.190 1.022 0.995 2010-Mar-31 23:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.532 1.150 1.130 0.991 2010-Mar-31 23:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.887 1.157 0.998 2010-Mar-31 23:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.900 1.014 1.044 2010-Mar-31 23:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.184 (still bad) 2010-Mar-31 23:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.190 (still bad) 2010-Mar-31 23:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.190 (still bad) 2010-Mar-31 23:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.188 (still bad) 2010-Mar-31 23:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.186 (still bad) 2010-Mar-31 23:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.194 (still bad) 2010-Mar-31 23:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.181 (still bad) 2010-Mar-31 23:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.180 (still bad) 2010-Mar-31 23:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.176 (still bad) 2010-Mar-31 23:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.172 (still bad) 2010-Mar-31 23:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Mar-31 23:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.179 (still bad) 2010-Mar-31 23:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.170 (still bad) 2010-Mar-31 23:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.168 (still bad) 2010-Mar-31 23:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Mar-31 23:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Mar-31 23:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.171 (still bad) 2010-Mar-31 23:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.177 (still bad) 2010-Mar-31 23:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Mar-31 23:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.168 (still bad) 2010-Mar-31 23:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.171 (still bad) 2010-Mar-31 23:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.170 (still bad) 2010-Mar-31 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Mar-31 23:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.181 (still bad) 2010-Mar-31 23:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Mar-31 23:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.172 (still bad) 2010-Mar-31 23:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.174 (still bad) 2010-Mar-31 23:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.178 (still bad) 2010-Mar-31 23:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 23:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 1.188 1.017 0.991 2010-Mar-31 23:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.148 1.132 0.990 2010-Mar-31 23:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.888 1.161 1.005 2010-Mar-31 23:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.899 1.016 1.043 2010-Mar-31 23:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.181 (still bad) 2010-Mar-31 23:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.180 (still bad) 2010-Mar-31 23:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.186 (still bad) 2010-Mar-31 23:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.184 (still bad) 2010-Mar-31 23:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.184 (still bad) 2010-Mar-31 23:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.190 (still bad) 2010-Mar-31 23:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.177 (still bad) 2010-Mar-31 23:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.175 (still bad) 2010-Mar-31 23:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.173 (still bad) 2010-Mar-31 23:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.172 (still bad) 2010-Mar-31 23:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.173 (still bad) 2010-Mar-31 23:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.172 (still bad) 2010-Mar-31 23:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.173 (still bad) 2010-Mar-31 23:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Mar-31 23:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.176 (still bad) 2010-Mar-31 23:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.169 (still bad) 2010-Mar-31 23:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Mar-31 23:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.173 (still bad) 2010-Mar-31 23:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.169 (still bad) 2010-Mar-31 23:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Mar-31 23:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.172 (still bad) 2010-Mar-31 23:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.171 (still bad) 2010-Mar-31 23:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Mar-31 23:45:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.517 < 0.75)! 2010-Mar-31 23:45:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.170 1.010 0.982 2010-Mar-31 23:45:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.517 1.144 1.128 0.985 2010-Mar-31 23:45:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.882 1.154 0.997 2010-Mar-31 23:45:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.898 1.014 1.042 2010-Mar-31 23:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Mar-31 23:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.173 (still bad) 2010-Mar-31 23:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Mar-31 23:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.173 (still bad) 2010-Mar-31 23:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.174 (still bad) 2010-Mar-31 23:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Mar-31 23:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.169 (still bad) 2010-Mar-31 23:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Mar-31 23:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Mar-31 23:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.179 (still bad) 2010-Mar-31 23:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.180 (still bad) 2010-Mar-31 23:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.181 (still bad) 2010-Mar-31 23:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.186 (still bad) 2010-Mar-31 23:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.185 (still bad) 2010-Mar-31 23:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.185 (still bad) 2010-Mar-31 23:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.185 (still bad) 2010-Mar-31 23:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Mar-31 23:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.175 (still bad) 2010-Mar-31 23:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.182 (still bad) 2010-Mar-31 23:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.173 (still bad) 2010-Mar-31 23:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.536 < 0.75)! 2010-Mar-31 23:46:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.172 1.009 0.981 2010-Mar-31 23:46:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.536 1.139 1.127 0.985 2010-Mar-31 23:46:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.884 1.159 1.005 2010-Mar-31 23:46:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.898 1.014 1.043 2010-Mar-31 23:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.171 (still bad) 2010-Mar-31 23:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.170 (still bad) 2010-Mar-31 23:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.170 (still bad) 2010-Mar-31 23:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.179 (still bad) 2010-Mar-31 23:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.174 (still bad) 2010-Mar-31 23:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.171 (still bad) 2010-Mar-31 23:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.173 (still bad) 2010-Mar-31 23:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.170 (still bad) 2010-Mar-31 23:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.181 (still bad) 2010-Mar-31 23:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.171 (still bad) 2010-Mar-31 23:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.172 (still bad) 2010-Mar-31 23:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.171 (still bad) 2010-Mar-31 23:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.168 (still bad) 2010-Mar-31 23:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.178 (still bad) 2010-Mar-31 23:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.171 (still bad) 2010-Mar-31 23:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.173 (still bad) 2010-Mar-31 23:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.171 (still bad) 2010-Mar-31 23:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.180 (still bad) 2010-Mar-31 23:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.168 (still bad) 2010-Mar-31 23:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 23:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.180 (still bad) 2010-Mar-31 23:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:47:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.516 < 0.75)! 2010-Mar-31 23:47:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.171 1.011 0.983 2010-Mar-31 23:47:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.516 1.141 1.127 0.984 2010-Mar-31 23:47:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.883 1.156 0.998 2010-Mar-31 23:47:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.898 1.017 1.043 2010-Mar-31 23:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.175 (still bad) 2010-Mar-31 23:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.171 (still bad) 2010-Mar-31 23:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.174 (still bad) 2010-Mar-31 23:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.183 (still bad) 2010-Mar-31 23:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.175 (still bad) 2010-Mar-31 23:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.173 (still bad) 2010-Mar-31 23:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.172 (still bad) 2010-Mar-31 23:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.172 (still bad) 2010-Mar-31 23:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.180 (still bad) 2010-Mar-31 23:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.172 (still bad) 2010-Mar-31 23:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.172 (still bad) 2010-Mar-31 23:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.172 (still bad) 2010-Mar-31 23:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.172 (still bad) 2010-Mar-31 23:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.171 (still bad) 2010-Mar-31 23:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.172 (still bad) 2010-Mar-31 23:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.168 (still bad) 2010-Mar-31 23:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Mar-31 23:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.175 (still bad) 2010-Mar-31 23:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.171 (still bad) 2010-Mar-31 23:48:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.501 < 0.75)! 2010-Mar-31 23:48:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.171 1.012 0.982 2010-Mar-31 23:48:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.501 1.141 1.133 0.988 2010-Mar-31 23:48:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.889 1.156 0.999 2010-Mar-31 23:48:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.896 1.015 1.040 2010-Mar-31 23:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.174 (still bad) 2010-Mar-31 23:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.172 (still bad) 2010-Mar-31 23:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.170 (still bad) 2010-Mar-31 23:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.170 (still bad) 2010-Mar-31 23:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Mar-31 23:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Mar-31 23:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.171 (still bad) 2010-Mar-31 23:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.170 (still bad) 2010-Mar-31 23:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.168 (still bad) 2010-Mar-31 23:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.167 (still bad) 2010-Mar-31 23:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Mar-31 23:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Mar-31 23:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.168 (still bad) 2010-Mar-31 23:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.169 (still bad) 2010-Mar-31 23:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 23:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.167 (still bad) 2010-Mar-31 23:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Mar-31 23:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.167 (still bad) 2010-Mar-31 23:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.169 (still bad) 2010-Mar-31 23:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.166 (still bad) 2010-Mar-31 23:49:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Mar-31 23:49:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.169 1.012 0.980 2010-Mar-31 23:49:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.139 1.132 0.988 2010-Mar-31 23:49:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.884 1.156 0.999 2010-Mar-31 23:49:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.897 1.015 1.042 2010-Mar-31 23:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.178 (still bad) 2010-Mar-31 23:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.169 (still bad) 2010-Mar-31 23:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.170 (still bad) 2010-Mar-31 23:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.169 (still bad) 2010-Mar-31 23:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.167 (still bad) 2010-Mar-31 23:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 23:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.179 (still bad) 2010-Mar-31 23:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.169 (still bad) 2010-Mar-31 23:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.167 (still bad) 2010-Mar-31 23:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.166 (still bad) 2010-Mar-31 23:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.177 (still bad) 2010-Mar-31 23:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.167 (still bad) 2010-Mar-31 23:49:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:49:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:49:53 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:49:53 LOG5 end_task: Level: (2) ID = <10328> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG1 fixed_driftmap: New position: year = 2010.2491251869596 RA = 12:26:53.9 RA/Dec = 12:27:27.2 +19:17:04.4 2010-Mar-31 23:49:53 NOTE fixed_driftmap: Correcting ZA to 6:26:45.8 ... 2010-Mar-31 23:49:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4460685018 -CF 2010-Mar-31 23:49:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:49:53 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:49:53 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:49:53 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:49:53 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:49:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:49:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:49:53 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:49:53 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4460685018 -CF 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:49:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:49:53 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:49:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:49:53 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:49:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:49:53 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Mar-31 23:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:49:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:49:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:49:54 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:49:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:49:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:49:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:49:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:49:54 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:49:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:49:54 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:49:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:49:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:49:54 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:49:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:49:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:49:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:49:54 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:49:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:49:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:49:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:49:54 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:49:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:49:54 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:49:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:49:54 INFO2 take_data: Starting WAPP 1-second scan: 9000113 2010-Mar-31 23:49:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:49:54 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Mar-31 23:49:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:49:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:49:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13795.00 2010-Mar-31 23:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.169 (still bad) 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:49:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:49:56 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Mar-31 23:49:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:49:56 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Mar-31 23:49:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Mar-31 23:49:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Mar-31 23:49:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Mar-31 23:49:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:49:56 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:49:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Mar-31 23:49:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:49:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:49:57 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Mar-31 23:49:57 STOP finish_task: Finishing task 'WAPP calibration' 2010-Mar-31 23:49:57 LOG5 finish_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Mar-31 23:49:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Mar-31 23:49:57 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2010-Mar-31 23:49:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:49:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:49:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:49:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Mar-31 23:49:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Mar-31 23:49:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:49:57 LOG5 begin_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Mar-31 23:49:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:49:57 INFO2 take_data: Starting WAPP 600-second scan: 9000114 2010-Mar-31 23:49:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:49:57 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Mar-31 23:49:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Mar-31 23:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.600 (still bad) 2010-Mar-31 23:49:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Mar-31 23:49:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13798.00 2010-Mar-31 23:49:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20100331.a2010.0027.fits 2010-Mar-31 23:49:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100331.a2010.0027.fits} 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.585 (still bad) 2010-Mar-31 23:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Mar-31 23:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.176 (still bad) 2010-Mar-31 23:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.167 (still bad) 2010-Mar-31 23:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.166 (still bad) 2010-Mar-31 23:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.167 (still bad) 2010-Mar-31 23:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.167 (still bad) 2010-Mar-31 23:50:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.505 < 0.75)! 2010-Mar-31 23:50:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.167 1.012 0.980 2010-Mar-31 23:50:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.505 1.141 1.128 0.985 2010-Mar-31 23:50:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.885 1.156 0.999 2010-Mar-31 23:50:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.897 1.015 1.041 2010-Mar-31 23:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.176 (still bad) 2010-Mar-31 23:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.168 (still bad) 2010-Mar-31 23:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.167 (still bad) 2010-Mar-31 23:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.166 (still bad) 2010-Mar-31 23:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.167 (still bad) 2010-Mar-31 23:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Mar-31 23:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.169 (still bad) 2010-Mar-31 23:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.167 (still bad) 2010-Mar-31 23:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.169 (still bad) 2010-Mar-31 23:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.168 (still bad) 2010-Mar-31 23:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.177 (still bad) 2010-Mar-31 23:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.168 (still bad) 2010-Mar-31 23:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.169 (still bad) 2010-Mar-31 23:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.177 (still bad) 2010-Mar-31 23:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.169 (still bad) 2010-Mar-31 23:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.168 (still bad) 2010-Mar-31 23:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.176 (still bad) 2010-Mar-31 23:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.170 (still bad) 2010-Mar-31 23:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.167 (still bad) 2010-Mar-31 23:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:51:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.509 < 0.75)! 2010-Mar-31 23:51:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.175 1.017 0.988 2010-Mar-31 23:51:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.509 1.150 1.135 0.992 2010-Mar-31 23:51:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.884 1.160 1.003 2010-Mar-31 23:51:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.900 1.016 1.044 2010-Mar-31 23:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.168 (still bad) 2010-Mar-31 23:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.170 (still bad) 2010-Mar-31 23:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.168 (still bad) 2010-Mar-31 23:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.178 (still bad) 2010-Mar-31 23:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.172 (still bad) 2010-Mar-31 23:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.170 (still bad) 2010-Mar-31 23:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.169 (still bad) 2010-Mar-31 23:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.179 (still bad) 2010-Mar-31 23:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.176 (still bad) 2010-Mar-31 23:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Mar-31 23:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.182 (still bad) 2010-Mar-31 23:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Mar-31 23:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.169 (still bad) 2010-Mar-31 23:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.176 (still bad) 2010-Mar-31 23:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Mar-31 23:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.170 (still bad) 2010-Mar-31 23:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.168 (still bad) 2010-Mar-31 23:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.175 (still bad) 2010-Mar-31 23:52:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.513 < 0.75)! 2010-Mar-31 23:52:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.170 1.013 0.984 2010-Mar-31 23:52:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.513 1.148 1.130 0.985 2010-Mar-31 23:52:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.885 1.162 1.004 2010-Mar-31 23:52:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.901 1.018 1.045 2010-Mar-31 23:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.168 (still bad) 2010-Mar-31 23:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.172 (still bad) 2010-Mar-31 23:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.178 (still bad) 2010-Mar-31 23:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.171 (still bad) 2010-Mar-31 23:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.173 (still bad) 2010-Mar-31 23:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.177 (still bad) 2010-Mar-31 23:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.169 (still bad) 2010-Mar-31 23:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.168 (still bad) 2010-Mar-31 23:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.170 (still bad) 2010-Mar-31 23:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Mar-31 23:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.170 (still bad) 2010-Mar-31 23:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.170 (still bad) 2010-Mar-31 23:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.172 (still bad) 2010-Mar-31 23:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.175 (still bad) 2010-Mar-31 23:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.170 (still bad) 2010-Mar-31 23:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.172 (still bad) 2010-Mar-31 23:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.169 (still bad) 2010-Mar-31 23:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.174 (still bad) 2010-Mar-31 23:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.170 (still bad) 2010-Mar-31 23:53:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.534 < 0.75)! 2010-Mar-31 23:53:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.168 1.010 0.981 2010-Mar-31 23:53:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.534 1.138 1.128 0.982 2010-Mar-31 23:53:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.884 1.156 0.998 2010-Mar-31 23:53:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.898 1.017 1.043 2010-Mar-31 23:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.169 (still bad) 2010-Mar-31 23:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.171 (still bad) 2010-Mar-31 23:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.171 (still bad) 2010-Mar-31 23:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.175 (still bad) 2010-Mar-31 23:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.173 (still bad) 2010-Mar-31 23:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.169 (still bad) 2010-Mar-31 23:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.171 (still bad) 2010-Mar-31 23:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.170 (still bad) 2010-Mar-31 23:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.174 (still bad) 2010-Mar-31 23:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.178 (still bad) 2010-Mar-31 23:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.173 (still bad) 2010-Mar-31 23:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.170 (still bad) 2010-Mar-31 23:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.173 (still bad) 2010-Mar-31 23:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.173 (still bad) 2010-Mar-31 23:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.178 (still bad) 2010-Mar-31 23:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.168 (still bad) 2010-Mar-31 23:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.169 (still bad) 2010-Mar-31 23:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.169 (still bad) 2010-Mar-31 23:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.171 (still bad) 2010-Mar-31 23:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.170 (still bad) 2010-Mar-31 23:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.177 (still bad) 2010-Mar-31 23:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.170 (still bad) 2010-Mar-31 23:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.171 (still bad) 2010-Mar-31 23:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.173 (still bad) 2010-Mar-31 23:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.174 (still bad) 2010-Mar-31 23:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.178 (still bad) 2010-Mar-31 23:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.175 (still bad) 2010-Mar-31 23:54:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Mar-31 23:54:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.176 1.014 0.983 2010-Mar-31 23:54:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.141 1.131 0.985 2010-Mar-31 23:54:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.885 1.158 0.998 2010-Mar-31 23:54:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.898 1.018 1.042 2010-Mar-31 23:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.174 (still bad) 2010-Mar-31 23:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.176 (still bad) 2010-Mar-31 23:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.181 (still bad) 2010-Mar-31 23:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.173 (still bad) 2010-Mar-31 23:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.173 (still bad) 2010-Mar-31 23:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.173 (still bad) 2010-Mar-31 23:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.169 (still bad) 2010-Mar-31 23:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.178 (still bad) 2010-Mar-31 23:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.176 (still bad) 2010-Mar-31 23:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.171 (still bad) 2010-Mar-31 23:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.173 (still bad) 2010-Mar-31 23:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.170 (still bad) 2010-Mar-31 23:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.171 (still bad) 2010-Mar-31 23:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Mar-31 23:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.174 (still bad) 2010-Mar-31 23:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.170 (still bad) 2010-Mar-31 23:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.173 (still bad) 2010-Mar-31 23:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.172 (still bad) 2010-Mar-31 23:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.172 (still bad) 2010-Mar-31 23:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.179 (still bad) 2010-Mar-31 23:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.172 (still bad) 2010-Mar-31 23:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.170 (still bad) 2010-Mar-31 23:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.174 (still bad) 2010-Mar-31 23:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.172 (still bad) 2010-Mar-31 23:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.172 (still bad) 2010-Mar-31 23:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.176 (still bad) 2010-Mar-31 23:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.171 (still bad) 2010-Mar-31 23:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.170 (still bad) 2010-Mar-31 23:55:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.496 < 0.75)! 2010-Mar-31 23:55:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.173 1.015 0.987 2010-Mar-31 23:55:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.496 1.142 1.132 0.986 2010-Mar-31 23:55:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.884 1.157 0.999 2010-Mar-31 23:55:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.901 1.018 1.045 2010-Mar-31 23:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.171 (still bad) 2010-Mar-31 23:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.171 (still bad) 2010-Mar-31 23:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Mar-31 23:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.174 (still bad) 2010-Mar-31 23:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.171 (still bad) 2010-Mar-31 23:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.174 (still bad) 2010-Mar-31 23:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.171 (still bad) 2010-Mar-31 23:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.176 (still bad) 2010-Mar-31 23:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.175 (still bad) 2010-Mar-31 23:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.173 (still bad) 2010-Mar-31 23:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.171 (still bad) 2010-Mar-31 23:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.174 (still bad) 2010-Mar-31 23:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.172 (still bad) 2010-Mar-31 23:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.173 (still bad) 2010-Mar-31 23:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Mar-31 23:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.173 (still bad) 2010-Mar-31 23:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.171 (still bad) 2010-Mar-31 23:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.176 (still bad) 2010-Mar-31 23:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Mar-31 23:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Mar-31 23:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.182 (still bad) 2010-Mar-31 23:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.174 (still bad) 2010-Mar-31 23:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.174 (still bad) 2010-Mar-31 23:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.174 (still bad) 2010-Mar-31 23:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.172 (still bad) 2010-Mar-31 23:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.174 (still bad) 2010-Mar-31 23:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Mar-31 23:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.171 (still bad) 2010-Mar-31 23:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.170 (still bad) 2010-Mar-31 23:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.172 (still bad) 2010-Mar-31 23:56:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Mar-31 23:56:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.172 1.011 0.984 2010-Mar-31 23:56:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.141 1.130 0.985 2010-Mar-31 23:56:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.889 1.157 1.000 2010-Mar-31 23:56:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.902 1.021 1.048 2010-Mar-31 23:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.174 (still bad) 2010-Mar-31 23:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.181 (still bad) 2010-Mar-31 23:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.173 (still bad) 2010-Mar-31 23:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.175 (still bad) 2010-Mar-31 23:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.172 (still bad) 2010-Mar-31 23:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.175 (still bad) 2010-Mar-31 23:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.548 and 1.174 (still bad) 2010-Mar-31 23:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.180 (still bad) 2010-Mar-31 23:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.171 (still bad) 2010-Mar-31 23:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.171 (still bad) 2010-Mar-31 23:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.173 (still bad) 2010-Mar-31 23:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.171 (still bad) 2010-Mar-31 23:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.172 (still bad) 2010-Mar-31 23:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.181 (still bad) 2010-Mar-31 23:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Mar-31 23:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.173 (still bad) 2010-Mar-31 23:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.173 (still bad) 2010-Mar-31 23:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.173 (still bad) 2010-Mar-31 23:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.173 (still bad) 2010-Mar-31 23:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.182 (still bad) 2010-Mar-31 23:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.174 (still bad) 2010-Mar-31 23:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.177 (still bad) 2010-Mar-31 23:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.185 (still bad) 2010-Mar-31 23:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.186 (still bad) 2010-Mar-31 23:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.191 (still bad) 2010-Mar-31 23:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.203 (still bad) 2010-Mar-31 23:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.196 (still bad) 2010-Mar-31 23:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.192 (still bad) 2010-Mar-31 23:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.191 (still bad) 2010-Mar-31 23:57:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.504 < 0.75)! 2010-Mar-31 23:57:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.946 1.185 1.012 0.984 2010-Mar-31 23:57:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.504 1.144 1.131 0.985 2010-Mar-31 23:57:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.885 1.155 0.999 2010-Mar-31 23:57:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.901 1.017 1.045 2010-Mar-31 23:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.182 (still bad) 2010-Mar-31 23:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.188 (still bad) 2010-Mar-31 23:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Mar-31 23:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.177 (still bad) 2010-Mar-31 23:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Mar-31 23:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.179 (still bad) 2010-Mar-31 23:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.189 (still bad) 2010-Mar-31 23:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.192 (still bad) 2010-Mar-31 23:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.189 (still bad) 2010-Mar-31 23:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.188 (still bad) 2010-Mar-31 23:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.184 (still bad) 2010-Mar-31 23:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.177 (still bad) 2010-Mar-31 23:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.177 (still bad) 2010-Mar-31 23:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.176 (still bad) 2010-Mar-31 23:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.175 (still bad) 2010-Mar-31 23:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.174 (still bad) 2010-Mar-31 23:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.175 (still bad) 2010-Mar-31 23:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.174 (still bad) 2010-Mar-31 23:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.173 (still bad) 2010-Mar-31 23:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Mar-31 23:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.173 (still bad) 2010-Mar-31 23:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.174 (still bad) 2010-Mar-31 23:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.175 (still bad) 2010-Mar-31 23:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.174 (still bad) 2010-Mar-31 23:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Mar-31 23:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.176 (still bad) 2010-Mar-31 23:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.174 (still bad) 2010-Mar-31 23:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.175 (still bad) 2010-Mar-31 23:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.175 (still bad) 2010-Mar-31 23:58:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.503 < 0.75)! 2010-Mar-31 23:58:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.175 1.013 0.984 2010-Mar-31 23:58:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.503 1.143 1.129 0.984 2010-Mar-31 23:58:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.884 1.160 1.001 2010-Mar-31 23:58:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.900 1.019 1.044 2010-Mar-31 23:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.174 (still bad) 2010-Mar-31 23:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.176 (still bad) 2010-Mar-31 23:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.175 (still bad) 2010-Mar-31 23:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.174 (still bad) 2010-Mar-31 23:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.173 (still bad) 2010-Mar-31 23:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Mar-31 23:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Mar-31 23:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Mar-31 23:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.171 (still bad) 2010-Mar-31 23:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.174 (still bad) 2010-Mar-31 23:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.175 (still bad) 2010-Mar-31 23:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.535 and 1.173 (still bad) 2010-Mar-31 23:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.176 (still bad) 2010-Mar-31 23:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.173 (still bad) 2010-Mar-31 23:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.172 (still bad) 2010-Mar-31 23:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.174 (still bad) 2010-Mar-31 23:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.176 (still bad) 2010-Mar-31 23:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Mar-31 23:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Mar-31 23:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.175 (still bad) 2010-Mar-31 23:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.175 (still bad) 2010-Mar-31 23:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.177 (still bad) 2010-Mar-31 23:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.175 (still bad) 2010-Mar-31 23:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.174 (still bad) 2010-Mar-31 23:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.174 (still bad) 2010-Mar-31 23:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Mar-31 23:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.176 (still bad) 2010-Mar-31 23:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.175 (still bad) 2010-Mar-31 23:59:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.527 < 0.75)! 2010-Mar-31 23:59:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.177 1.015 0.987 2010-Mar-31 23:59:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.527 1.159 1.129 0.988 2010-Mar-31 23:59:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.886 1.158 0.999 2010-Mar-31 23:59:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.902 1.018 1.047 2010-Mar-31 23:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.188 (still bad) 2010-Mar-31 23:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.180 (still bad) 2010-Mar-31 23:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.180 (still bad) 2010-Mar-31 23:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.179 (still bad) 2010-Mar-31 23:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.178 (still bad) 2010-Mar-31 23:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.179 (still bad) 2010-Mar-31 23:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.180 (still bad) 2010-Mar-31 23:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.178 (still bad) 2010-Mar-31 23:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.179 (still bad) 2010-Mar-31 23:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.180 (still bad) 2010-Mar-31 23:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.178 (still bad) 2010-Mar-31 23:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.178 (still bad) 2010-Mar-31 23:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.179 (still bad) 2010-Mar-31 23:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.176 (still bad) 2010-Mar-31 23:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.175 (still bad) 2010-Mar-31 23:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.536 and 1.176 (still bad) 2010-Mar-31 23:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.174 (still bad) 2010-Mar-31 23:59:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Mar-31 23:59:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Mar-31 23:59:58 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Mar-31 23:59:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Mar-31 23:59:58 LOG5 end_task: Level: (2) ID = <10339> Status = 0 0 0 0 ok 2010-Mar-31 23:59:58 LOG1 fixed_driftmap: New position: year = 2010.2491443582528 RA = 12:37:01.0 RA/Dec = 12:37:34.1 +19:17:05.3 2010-Mar-31 23:59:58 NOTE fixed_driftmap: Correcting ZA to 6:26:53.0 ... 2010-Mar-31 23:59:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4480513515 -CF 2010-Mar-31 23:59:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Mar-31 23:59:58 START begin_task: Starting task 'WAPP calibration' 2010-Mar-31 23:59:58 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Mar-31 23:59:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Mar-31 23:59:58 START begin_task: Starting task 'selecting calibration type' 2010-Mar-31 23:59:58 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Mar-31 23:59:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Mar-31 23:59:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Mar-31 23:59:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:59:58 START begin_task: Starting task 'waiting on setcal' 2010-Mar-31 23:59:58 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2010-Mar-31 23:59:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4480513515 -CF 2010-Mar-31 23:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:59:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Mar-31 23:59:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Mar-31 23:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:59:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-Mar-31 23:59:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Mar-31 23:59:59 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Mar-31 23:59:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:59:59 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Mar-31 23:59:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:59:59 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Mar-31 23:59:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:59:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:59:59 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:59:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Mar-31 23:59:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Mar-31 23:59:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:59:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Mar-31 23:59:59 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Mar-31 23:59:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Mar-31 23:59:59 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Mar-31 23:59:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Mar-31 23:59:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Mar-31 23:59:59 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Mar-31 23:59:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Mar-31 23:59:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Mar-31 23:59:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Mar-31 23:59:59 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Mar-31 23:59:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Mar-31 23:59:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Mar-31 23:59:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Mar-31 23:59:59 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Mar-31 23:59:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Mar-31 23:59:59 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Mar-31 23:59:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Mar-31 23:59:59 INFO2 take_data: Starting WAPP 1-second scan: 9000115 2010-Mar-31 23:59:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Mar-31 23:59:59 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-Mar-31 23:59:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Mar-31 23:59:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Mar-31 23:59:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14400.00 2010-Apr-01 00:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.174 (still bad) 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:00:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:00:01 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:00:01 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:00:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:00:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:00:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:00:01 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:00:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:00:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:00:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:00:01 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:00:01 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:00:01 LOG5 finish_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:00:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:00:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:00:01 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Apr-01 00:00:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2010-Apr-01 00:00:01 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2010-Apr-01 00:00:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:00:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:00:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:00:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:00:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:00:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:00:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:00:02 LOG5 begin_task: Level: (2) ID = <10350> Status = 0 0 0 0 ok 2010-Apr-01 00:00:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:00:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:00:02 INFO2 take_data: Starting WAPP 600-second scan: 9100001 2010-Apr-01 00:00:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:00:02 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2010-Apr-01 00:00:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:00:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:00:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:00:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14403.00 2010-Apr-01 00:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.626 (still bad) 2010-Apr-01 00:00:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0000.fits 2010-Apr-01 00:00:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0000.fits} 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.597 (still bad) 2010-Apr-01 00:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.257 (still bad) 2010-Apr-01 00:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.284 (still bad) 2010-Apr-01 00:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.301 (still bad) 2010-Apr-01 00:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.308 (still bad) 2010-Apr-01 00:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.295 (still bad) 2010-Apr-01 00:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.271 (still bad) 2010-Apr-01 00:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.241 (still bad) 2010-Apr-01 00:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.211 (still bad) 2010-Apr-01 00:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.181 (still bad) 2010-Apr-01 00:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.175 (still bad) 2010-Apr-01 00:00:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.498 < 0.75)! 2010-Apr-01 00:00:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.176 1.015 0.985 2010-Apr-01 00:00:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.498 1.143 1.145 0.999 2010-Apr-01 00:00:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.149 0.902 1.167 1.007 2010-Apr-01 00:00:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.910 1.029 1.056 2010-Apr-01 00:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.173 (still bad) 2010-Apr-01 00:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.199 (still bad) 2010-Apr-01 00:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.222 (still bad) 2010-Apr-01 00:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.243 (still bad) 2010-Apr-01 00:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.251 (still bad) 2010-Apr-01 00:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.252 (still bad) 2010-Apr-01 00:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.236 (still bad) 2010-Apr-01 00:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.214 (still bad) 2010-Apr-01 00:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.175 (still bad) 2010-Apr-01 00:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.176 (still bad) 2010-Apr-01 00:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.183 (still bad) 2010-Apr-01 00:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.182 (still bad) 2010-Apr-01 00:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.191 (still bad) 2010-Apr-01 00:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.199 (still bad) 2010-Apr-01 00:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.199 (still bad) 2010-Apr-01 00:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.196 (still bad) 2010-Apr-01 00:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.198 (still bad) 2010-Apr-01 00:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.182 (still bad) 2010-Apr-01 00:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.176 (still bad) 2010-Apr-01 00:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.172 (still bad) 2010-Apr-01 00:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.172 (still bad) 2010-Apr-01 00:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Apr-01 00:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.186 (still bad) 2010-Apr-01 00:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.180 (still bad) 2010-Apr-01 00:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.178 (still bad) 2010-Apr-01 00:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.178 (still bad) 2010-Apr-01 00:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.175 (still bad) 2010-Apr-01 00:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.174 (still bad) 2010-Apr-01 00:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.183 (still bad) 2010-Apr-01 00:01:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.533 < 0.75)! 2010-Apr-01 00:01:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.173 1.013 0.983 2010-Apr-01 00:01:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.533 1.141 1.131 0.986 2010-Apr-01 00:01:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.885 1.160 1.004 2010-Apr-01 00:01:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.900 1.017 1.044 2010-Apr-01 00:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.171 (still bad) 2010-Apr-01 00:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.172 (still bad) 2010-Apr-01 00:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.169 (still bad) 2010-Apr-01 00:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Apr-01 00:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.693 and 1.180 (still bad) 2010-Apr-01 00:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.170 (still bad) 2010-Apr-01 00:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.702 and 1.169 (still bad) 2010-Apr-01 00:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.173 (still bad) 2010-Apr-01 00:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.686 and 1.169 (still bad) 2010-Apr-01 00:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.172 (still bad) 2010-Apr-01 00:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.181 (still bad) 2010-Apr-01 00:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.173 (still bad) 2010-Apr-01 00:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Apr-01 00:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.172 (still bad) 2010-Apr-01 00:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Apr-01 00:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.172 (still bad) 2010-Apr-01 00:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.182 (still bad) 2010-Apr-01 00:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Apr-01 00:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.171 (still bad) 2010-Apr-01 00:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.172 (still bad) 2010-Apr-01 00:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.171 (still bad) 2010-Apr-01 00:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.172 (still bad) 2010-Apr-01 00:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.181 (still bad) 2010-Apr-01 00:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.170 (still bad) 2010-Apr-01 00:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Apr-01 00:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.173 (still bad) 2010-Apr-01 00:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.172 (still bad) 2010-Apr-01 00:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.172 (still bad) 2010-Apr-01 00:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.178 (still bad) 2010-Apr-01 00:02:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.524 < 0.75)! 2010-Apr-01 00:02:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.169 1.013 0.985 2010-Apr-01 00:02:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.524 1.142 1.132 0.986 2010-Apr-01 00:02:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.885 1.156 0.999 2010-Apr-01 00:02:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.900 1.017 1.042 2010-Apr-01 00:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.166 (still bad) 2010-Apr-01 00:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.171 (still bad) 2010-Apr-01 00:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.171 (still bad) 2010-Apr-01 00:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.171 (still bad) 2010-Apr-01 00:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.170 (still bad) 2010-Apr-01 00:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.168 (still bad) 2010-Apr-01 00:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.172 (still bad) 2010-Apr-01 00:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.171 (still bad) 2010-Apr-01 00:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.169 (still bad) 2010-Apr-01 00:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.170 (still bad) 2010-Apr-01 00:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.171 (still bad) 2010-Apr-01 00:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.168 (still bad) 2010-Apr-01 00:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.169 (still bad) 2010-Apr-01 00:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.170 (still bad) 2010-Apr-01 00:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.167 (still bad) 2010-Apr-01 00:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.169 (still bad) 2010-Apr-01 00:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.169 (still bad) 2010-Apr-01 00:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.170 (still bad) 2010-Apr-01 00:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.170 (still bad) 2010-Apr-01 00:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.172 (still bad) 2010-Apr-01 00:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Apr-01 00:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.173 (still bad) 2010-Apr-01 00:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Apr-01 00:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Apr-01 00:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.169 (still bad) 2010-Apr-01 00:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.171 (still bad) 2010-Apr-01 00:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.172 (still bad) 2010-Apr-01 00:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.173 (still bad) 2010-Apr-01 00:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.171 (still bad) 2010-Apr-01 00:03:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.519 < 0.75)! 2010-Apr-01 00:03:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.171 1.013 0.985 2010-Apr-01 00:03:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.519 1.139 1.130 0.984 2010-Apr-01 00:03:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.885 1.158 1.002 2010-Apr-01 00:03:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.903 1.020 1.046 2010-Apr-01 00:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Apr-01 00:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.170 (still bad) 2010-Apr-01 00:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.170 (still bad) 2010-Apr-01 00:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.172 (still bad) 2010-Apr-01 00:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.172 (still bad) 2010-Apr-01 00:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Apr-01 00:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.169 (still bad) 2010-Apr-01 00:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Apr-01 00:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.169 (still bad) 2010-Apr-01 00:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.171 (still bad) 2010-Apr-01 00:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.174 (still bad) 2010-Apr-01 00:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.169 (still bad) 2010-Apr-01 00:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Apr-01 00:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.173 (still bad) 2010-Apr-01 00:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.170 (still bad) 2010-Apr-01 00:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.173 (still bad) 2010-Apr-01 00:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.174 (still bad) 2010-Apr-01 00:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.170 (still bad) 2010-Apr-01 00:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Apr-01 00:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.173 (still bad) 2010-Apr-01 00:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.170 (still bad) 2010-Apr-01 00:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Apr-01 00:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Apr-01 00:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.170 (still bad) 2010-Apr-01 00:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.174 (still bad) 2010-Apr-01 00:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.170 (still bad) 2010-Apr-01 00:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Apr-01 00:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.180 (still bad) 2010-Apr-01 00:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.173 (still bad) 2010-Apr-01 00:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.170 (still bad) 2010-Apr-01 00:04:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.514 < 0.75)! 2010-Apr-01 00:04:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.171 1.015 0.985 2010-Apr-01 00:04:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.514 1.143 1.133 0.985 2010-Apr-01 00:04:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.886 1.157 1.001 2010-Apr-01 00:04:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.902 1.019 1.046 2010-Apr-01 00:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.169 (still bad) 2010-Apr-01 00:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.171 (still bad) 2010-Apr-01 00:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.179 (still bad) 2010-Apr-01 00:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.170 (still bad) 2010-Apr-01 00:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.170 (still bad) 2010-Apr-01 00:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.173 (still bad) 2010-Apr-01 00:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.171 (still bad) 2010-Apr-01 00:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.170 (still bad) 2010-Apr-01 00:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.179 (still bad) 2010-Apr-01 00:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.170 (still bad) 2010-Apr-01 00:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.172 (still bad) 2010-Apr-01 00:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.173 (still bad) 2010-Apr-01 00:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.172 (still bad) 2010-Apr-01 00:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Apr-01 00:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.182 (still bad) 2010-Apr-01 00:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.174 (still bad) 2010-Apr-01 00:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.172 (still bad) 2010-Apr-01 00:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.174 (still bad) 2010-Apr-01 00:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.172 (still bad) 2010-Apr-01 00:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.172 (still bad) 2010-Apr-01 00:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.182 (still bad) 2010-Apr-01 00:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.175 (still bad) 2010-Apr-01 00:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.172 (still bad) 2010-Apr-01 00:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.172 (still bad) 2010-Apr-01 00:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.172 (still bad) 2010-Apr-01 00:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.172 (still bad) 2010-Apr-01 00:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.180 (still bad) 2010-Apr-01 00:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.174 (still bad) 2010-Apr-01 00:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.171 (still bad) 2010-Apr-01 00:05:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.525 < 0.75)! 2010-Apr-01 00:05:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.173 1.016 0.987 2010-Apr-01 00:05:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.525 1.146 1.133 0.985 2010-Apr-01 00:05:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.885 1.159 1.001 2010-Apr-01 00:05:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.901 1.017 1.046 2010-Apr-01 00:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.173 (still bad) 2010-Apr-01 00:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.171 (still bad) 2010-Apr-01 00:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.181 (still bad) 2010-Apr-01 00:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.174 (still bad) 2010-Apr-01 00:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.171 (still bad) 2010-Apr-01 00:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.174 (still bad) 2010-Apr-01 00:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.171 (still bad) 2010-Apr-01 00:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.173 (still bad) 2010-Apr-01 00:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.179 (still bad) 2010-Apr-01 00:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.172 (still bad) 2010-Apr-01 00:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.171 (still bad) 2010-Apr-01 00:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.171 (still bad) 2010-Apr-01 00:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.174 (still bad) 2010-Apr-01 00:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.172 (still bad) 2010-Apr-01 00:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.176 (still bad) 2010-Apr-01 00:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.172 (still bad) 2010-Apr-01 00:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.174 (still bad) 2010-Apr-01 00:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.171 (still bad) 2010-Apr-01 00:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.174 (still bad) 2010-Apr-01 00:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.176 (still bad) 2010-Apr-01 00:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.178 (still bad) 2010-Apr-01 00:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.172 (still bad) 2010-Apr-01 00:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.172 (still bad) 2010-Apr-01 00:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.172 (still bad) 2010-Apr-01 00:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.171 (still bad) 2010-Apr-01 00:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.173 (still bad) 2010-Apr-01 00:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.180 (still bad) 2010-Apr-01 00:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.173 (still bad) 2010-Apr-01 00:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.174 (still bad) 2010-Apr-01 00:06:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.496 < 0.75)! 2010-Apr-01 00:06:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.175 1.016 0.988 2010-Apr-01 00:06:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.496 1.141 1.139 0.994 2010-Apr-01 00:06:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.885 1.159 1.000 2010-Apr-01 00:06:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.903 1.019 1.048 2010-Apr-01 00:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.174 (still bad) 2010-Apr-01 00:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.172 (still bad) 2010-Apr-01 00:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.184 (still bad) 2010-Apr-01 00:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.173 (still bad) 2010-Apr-01 00:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.173 (still bad) 2010-Apr-01 00:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.175 (still bad) 2010-Apr-01 00:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.175 (still bad) 2010-Apr-01 00:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.175 (still bad) 2010-Apr-01 00:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.182 (still bad) 2010-Apr-01 00:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.173 (still bad) 2010-Apr-01 00:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.173 (still bad) 2010-Apr-01 00:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.175 (still bad) 2010-Apr-01 00:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.174 (still bad) 2010-Apr-01 00:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.174 (still bad) 2010-Apr-01 00:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.182 (still bad) 2010-Apr-01 00:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.172 (still bad) 2010-Apr-01 00:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.175 (still bad) 2010-Apr-01 00:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.173 (still bad) 2010-Apr-01 00:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.174 (still bad) 2010-Apr-01 00:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.176 (still bad) 2010-Apr-01 00:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.182 (still bad) 2010-Apr-01 00:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.175 (still bad) 2010-Apr-01 00:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.174 (still bad) 2010-Apr-01 00:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.176 (still bad) 2010-Apr-01 00:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.174 (still bad) 2010-Apr-01 00:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.175 (still bad) 2010-Apr-01 00:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.183 (still bad) 2010-Apr-01 00:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.174 (still bad) 2010-Apr-01 00:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.173 (still bad) 2010-Apr-01 00:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.173 (still bad) 2010-Apr-01 00:07:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.464 < 0.75)! 2010-Apr-01 00:07:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.174 1.013 0.985 2010-Apr-01 00:07:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.464 1.142 1.131 0.986 2010-Apr-01 00:07:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.886 1.162 1.002 2010-Apr-01 00:07:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.902 1.019 1.045 2010-Apr-01 00:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.178 (still bad) 2010-Apr-01 00:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.176 (still bad) 2010-Apr-01 00:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.174 (still bad) 2010-Apr-01 00:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.174 (still bad) 2010-Apr-01 00:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.174 (still bad) 2010-Apr-01 00:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.171 (still bad) 2010-Apr-01 00:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.178 (still bad) 2010-Apr-01 00:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.178 (still bad) 2010-Apr-01 00:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.176 (still bad) 2010-Apr-01 00:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.176 (still bad) 2010-Apr-01 00:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.173 (still bad) 2010-Apr-01 00:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.177 (still bad) 2010-Apr-01 00:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.180 (still bad) 2010-Apr-01 00:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.177 (still bad) 2010-Apr-01 00:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.173 (still bad) 2010-Apr-01 00:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.177 (still bad) 2010-Apr-01 00:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.176 (still bad) 2010-Apr-01 00:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.172 (still bad) 2010-Apr-01 00:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.177 (still bad) 2010-Apr-01 00:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.176 (still bad) 2010-Apr-01 00:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.174 (still bad) 2010-Apr-01 00:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.177 (still bad) 2010-Apr-01 00:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.175 (still bad) 2010-Apr-01 00:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.178 (still bad) 2010-Apr-01 00:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.183 (still bad) 2010-Apr-01 00:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.184 (still bad) 2010-Apr-01 00:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.182 (still bad) 2010-Apr-01 00:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.186 (still bad) 2010-Apr-01 00:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.186 (still bad) 2010-Apr-01 00:08:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.479 < 0.75)! 2010-Apr-01 00:08:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 1.185 1.018 0.989 2010-Apr-01 00:08:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.479 1.143 1.132 0.985 2010-Apr-01 00:08:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.888 1.159 1.001 2010-Apr-01 00:08:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.901 1.018 1.046 2010-Apr-01 00:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.187 (still bad) 2010-Apr-01 00:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.181 (still bad) 2010-Apr-01 00:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.180 (still bad) 2010-Apr-01 00:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.178 (still bad) 2010-Apr-01 00:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.176 (still bad) 2010-Apr-01 00:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.177 (still bad) 2010-Apr-01 00:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.178 (still bad) 2010-Apr-01 00:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.176 (still bad) 2010-Apr-01 00:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.173 (still bad) 2010-Apr-01 00:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.174 (still bad) 2010-Apr-01 00:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.175 (still bad) 2010-Apr-01 00:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.174 (still bad) 2010-Apr-01 00:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.178 (still bad) 2010-Apr-01 00:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.179 (still bad) 2010-Apr-01 00:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.176 (still bad) 2010-Apr-01 00:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.175 (still bad) 2010-Apr-01 00:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.175 (still bad) 2010-Apr-01 00:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.175 (still bad) 2010-Apr-01 00:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.180 (still bad) 2010-Apr-01 00:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.174 (still bad) 2010-Apr-01 00:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.176 (still bad) 2010-Apr-01 00:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.179 (still bad) 2010-Apr-01 00:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.174 (still bad) 2010-Apr-01 00:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.179 (still bad) 2010-Apr-01 00:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.187 (still bad) 2010-Apr-01 00:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.180 (still bad) 2010-Apr-01 00:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.184 (still bad) 2010-Apr-01 00:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.183 (still bad) 2010-Apr-01 00:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.185 (still bad) 2010-Apr-01 00:09:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.489 < 0.75)! 2010-Apr-01 00:09:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.189 1.018 0.988 2010-Apr-01 00:09:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.489 1.148 1.135 0.989 2010-Apr-01 00:09:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.890 1.160 1.001 2010-Apr-01 00:09:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.904 1.020 1.050 2010-Apr-01 00:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.186 (still bad) 2010-Apr-01 00:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.186 (still bad) 2010-Apr-01 00:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.185 (still bad) 2010-Apr-01 00:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.183 (still bad) 2010-Apr-01 00:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.181 (still bad) 2010-Apr-01 00:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.183 (still bad) 2010-Apr-01 00:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.183 (still bad) 2010-Apr-01 00:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.179 (still bad) 2010-Apr-01 00:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.180 (still bad) 2010-Apr-01 00:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.178 (still bad) 2010-Apr-01 00:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.180 (still bad) 2010-Apr-01 00:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.180 (still bad) 2010-Apr-01 00:10:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:10:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:10:03 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:10:03 LOG5 end_task: Level: (2) ID = <10350> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 LOG1 fixed_driftmap: New position: year = 2010.249163529546 RA = 12:47:08.4 RA/Dec = 12:47:41.3 +19:17:06.6 2010-Apr-01 00:10:03 NOTE fixed_driftmap: Correcting ZA to 6:27:03.4 ... 2010-Apr-01 00:10:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4509386274 -CF 2010-Apr-01 00:10:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 00:10:03 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 00:10:03 LOG5 begin_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 00:10:03 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 00:10:03 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 00:10:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 00:10:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:10:03 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 00:10:03 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.183 (still bad) 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4509386274 -CF 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:10:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 00:10:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 00:10:03 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2010-Apr-01 00:10:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 00:10:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:10:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 00:10:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:10:03 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:10:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:10:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:10:04 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:10:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 00:10:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:10:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:10:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:10:04 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:10:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:10:04 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:10:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:10:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 00:10:04 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 00:10:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 00:10:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 00:10:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:10:04 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:10:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 00:10:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:10:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:10:04 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 00:10:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:10:04 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 00:10:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:10:04 INFO2 take_data: Starting WAPP 1-second scan: 9100002 2010-Apr-01 00:10:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:10:04 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-Apr-01 00:10:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:10:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 00:10:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15005.00 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:10:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:10:06 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:10:06 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:10:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:10:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:10:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:10:06 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:10:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.630 and 1.614 (still bad) 2010-Apr-01 00:10:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:10:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:10:06 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:10:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:10:06 LOG5 finish_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:10:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:10:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:10:06 LOG5 end_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2010-Apr-01 00:10:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2010-Apr-01 00:10:06 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2010-Apr-01 00:10:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:10:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:10:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:10:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:10:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:10:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:10:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:10:07 LOG5 begin_task: Level: (2) ID = <10361> Status = 0 0 0 0 ok 2010-Apr-01 00:10:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:10:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:10:07 INFO2 take_data: Starting WAPP 600-second scan: 9100003 2010-Apr-01 00:10:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:10:07 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2010-Apr-01 00:10:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:10:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:10:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:10:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15008.00 2010-Apr-01 00:10:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0001.fits 2010-Apr-01 00:10:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0001.fits} 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.589 (still bad) 2010-Apr-01 00:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.178 (still bad) 2010-Apr-01 00:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.181 (still bad) 2010-Apr-01 00:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.179 (still bad) 2010-Apr-01 00:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.180 (still bad) 2010-Apr-01 00:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.176 (still bad) 2010-Apr-01 00:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.178 (still bad) 2010-Apr-01 00:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.176 (still bad) 2010-Apr-01 00:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.178 (still bad) 2010-Apr-01 00:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.178 (still bad) 2010-Apr-01 00:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.177 (still bad) 2010-Apr-01 00:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.179 (still bad) 2010-Apr-01 00:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.177 (still bad) 2010-Apr-01 00:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.176 (still bad) 2010-Apr-01 00:10:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.482 < 0.75)! 2010-Apr-01 00:10:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.180 1.018 0.988 2010-Apr-01 00:10:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.482 1.151 1.133 0.989 2010-Apr-01 00:10:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.896 1.173 1.010 2010-Apr-01 00:10:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.910 1.027 1.056 2010-Apr-01 00:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.179 (still bad) 2010-Apr-01 00:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.175 (still bad) 2010-Apr-01 00:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.178 (still bad) 2010-Apr-01 00:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.179 (still bad) 2010-Apr-01 00:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.178 (still bad) 2010-Apr-01 00:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.179 (still bad) 2010-Apr-01 00:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.179 (still bad) 2010-Apr-01 00:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.175 (still bad) 2010-Apr-01 00:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.181 (still bad) 2010-Apr-01 00:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.174 (still bad) 2010-Apr-01 00:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.177 (still bad) 2010-Apr-01 00:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.186 (still bad) 2010-Apr-01 00:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.176 (still bad) 2010-Apr-01 00:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.177 (still bad) 2010-Apr-01 00:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.179 (still bad) 2010-Apr-01 00:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.179 (still bad) 2010-Apr-01 00:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.178 (still bad) 2010-Apr-01 00:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.187 (still bad) 2010-Apr-01 00:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.177 (still bad) 2010-Apr-01 00:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.176 (still bad) 2010-Apr-01 00:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.181 (still bad) 2010-Apr-01 00:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.178 (still bad) 2010-Apr-01 00:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.178 (still bad) 2010-Apr-01 00:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.187 (still bad) 2010-Apr-01 00:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.178 (still bad) 2010-Apr-01 00:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.179 (still bad) 2010-Apr-01 00:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.179 (still bad) 2010-Apr-01 00:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.178 (still bad) 2010-Apr-01 00:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.178 (still bad) 2010-Apr-01 00:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.186 (still bad) 2010-Apr-01 00:11:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.511 < 0.75)! 2010-Apr-01 00:11:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.177 1.016 0.988 2010-Apr-01 00:11:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.511 1.150 1.136 0.990 2010-Apr-01 00:11:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.891 1.163 1.002 2010-Apr-01 00:11:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.905 1.022 1.049 2010-Apr-01 00:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Apr-01 00:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.179 (still bad) 2010-Apr-01 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.177 (still bad) 2010-Apr-01 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.179 (still bad) 2010-Apr-01 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.188 (still bad) 2010-Apr-01 00:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.177 (still bad) 2010-Apr-01 00:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.177 (still bad) 2010-Apr-01 00:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.178 (still bad) 2010-Apr-01 00:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.176 (still bad) 2010-Apr-01 00:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.184 (still bad) 2010-Apr-01 00:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.177 (still bad) 2010-Apr-01 00:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.175 (still bad) 2010-Apr-01 00:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.177 (still bad) 2010-Apr-01 00:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Apr-01 00:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.177 (still bad) 2010-Apr-01 00:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.187 (still bad) 2010-Apr-01 00:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Apr-01 00:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.175 (still bad) 2010-Apr-01 00:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.178 (still bad) 2010-Apr-01 00:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.176 (still bad) 2010-Apr-01 00:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.177 (still bad) 2010-Apr-01 00:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.184 (still bad) 2010-Apr-01 00:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.177 (still bad) 2010-Apr-01 00:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.175 (still bad) 2010-Apr-01 00:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.178 (still bad) 2010-Apr-01 00:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.176 (still bad) 2010-Apr-01 00:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.178 (still bad) 2010-Apr-01 00:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.179 (still bad) 2010-Apr-01 00:12:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Apr-01 00:12:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.176 1.014 0.989 2010-Apr-01 00:12:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.150 1.134 0.988 2010-Apr-01 00:12:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.889 1.161 1.002 2010-Apr-01 00:12:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.902 1.019 1.049 2010-Apr-01 00:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.176 (still bad) 2010-Apr-01 00:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.178 (still bad) 2010-Apr-01 00:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.178 (still bad) 2010-Apr-01 00:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.179 (still bad) 2010-Apr-01 00:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.177 (still bad) 2010-Apr-01 00:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Apr-01 00:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.175 (still bad) 2010-Apr-01 00:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.176 (still bad) 2010-Apr-01 00:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.176 (still bad) 2010-Apr-01 00:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.178 (still bad) 2010-Apr-01 00:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.181 (still bad) 2010-Apr-01 00:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.176 (still bad) 2010-Apr-01 00:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.176 (still bad) 2010-Apr-01 00:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.176 (still bad) 2010-Apr-01 00:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.176 (still bad) 2010-Apr-01 00:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.179 (still bad) 2010-Apr-01 00:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.177 (still bad) 2010-Apr-01 00:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Apr-01 00:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.177 (still bad) 2010-Apr-01 00:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.179 (still bad) 2010-Apr-01 00:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.179 (still bad) 2010-Apr-01 00:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.180 (still bad) 2010-Apr-01 00:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.181 (still bad) 2010-Apr-01 00:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.178 (still bad) 2010-Apr-01 00:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.178 (still bad) 2010-Apr-01 00:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.178 (still bad) 2010-Apr-01 00:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.181 (still bad) 2010-Apr-01 00:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.180 (still bad) 2010-Apr-01 00:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.178 (still bad) 2010-Apr-01 00:13:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.503 < 0.75)! 2010-Apr-01 00:13:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.175 1.014 0.986 2010-Apr-01 00:13:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.503 1.148 1.132 0.988 2010-Apr-01 00:13:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 0.887 1.159 1.001 2010-Apr-01 00:13:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.904 1.021 1.050 2010-Apr-01 00:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.175 (still bad) 2010-Apr-01 00:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.174 (still bad) 2010-Apr-01 00:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.174 (still bad) 2010-Apr-01 00:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.177 (still bad) 2010-Apr-01 00:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.175 (still bad) 2010-Apr-01 00:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Apr-01 00:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Apr-01 00:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.174 (still bad) 2010-Apr-01 00:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.173 (still bad) 2010-Apr-01 00:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.175 (still bad) 2010-Apr-01 00:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.171 (still bad) 2010-Apr-01 00:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.174 (still bad) 2010-Apr-01 00:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.175 (still bad) 2010-Apr-01 00:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.173 (still bad) 2010-Apr-01 00:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.175 (still bad) 2010-Apr-01 00:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.173 (still bad) 2010-Apr-01 00:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.173 (still bad) 2010-Apr-01 00:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.173 (still bad) 2010-Apr-01 00:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.172 (still bad) 2010-Apr-01 00:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.175 (still bad) 2010-Apr-01 00:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.184 (still bad) 2010-Apr-01 00:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.173 (still bad) 2010-Apr-01 00:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.173 (still bad) 2010-Apr-01 00:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.176 (still bad) 2010-Apr-01 00:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.173 (still bad) 2010-Apr-01 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.176 (still bad) 2010-Apr-01 00:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.185 (still bad) 2010-Apr-01 00:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.174 (still bad) 2010-Apr-01 00:14:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.499 < 0.75)! 2010-Apr-01 00:14:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.173 1.013 0.987 2010-Apr-01 00:14:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.499 1.143 1.132 0.987 2010-Apr-01 00:14:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.887 1.160 1.002 2010-Apr-01 00:14:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.905 1.020 1.051 2010-Apr-01 00:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.178 (still bad) 2010-Apr-01 00:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.176 (still bad) 2010-Apr-01 00:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Apr-01 00:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.184 (still bad) 2010-Apr-01 00:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.174 (still bad) 2010-Apr-01 00:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.178 (still bad) 2010-Apr-01 00:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.174 (still bad) 2010-Apr-01 00:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.175 (still bad) 2010-Apr-01 00:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.184 (still bad) 2010-Apr-01 00:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.174 (still bad) 2010-Apr-01 00:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.174 (still bad) 2010-Apr-01 00:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.177 (still bad) 2010-Apr-01 00:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.174 (still bad) 2010-Apr-01 00:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Apr-01 00:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.182 (still bad) 2010-Apr-01 00:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.174 (still bad) 2010-Apr-01 00:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.174 (still bad) 2010-Apr-01 00:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.175 (still bad) 2010-Apr-01 00:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.175 (still bad) 2010-Apr-01 00:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.175 (still bad) 2010-Apr-01 00:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.183 (still bad) 2010-Apr-01 00:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.175 (still bad) 2010-Apr-01 00:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.175 (still bad) 2010-Apr-01 00:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.178 (still bad) 2010-Apr-01 00:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.176 (still bad) 2010-Apr-01 00:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.178 (still bad) 2010-Apr-01 00:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.184 (still bad) 2010-Apr-01 00:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.175 (still bad) 2010-Apr-01 00:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:15:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.505 < 0.75)! 2010-Apr-01 00:15:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.176 1.016 0.988 2010-Apr-01 00:15:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.505 1.147 1.135 0.989 2010-Apr-01 00:15:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.887 1.161 1.003 2010-Apr-01 00:15:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.906 1.021 1.051 2010-Apr-01 00:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Apr-01 00:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.174 (still bad) 2010-Apr-01 00:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.185 (still bad) 2010-Apr-01 00:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.176 (still bad) 2010-Apr-01 00:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.176 (still bad) 2010-Apr-01 00:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.176 (still bad) 2010-Apr-01 00:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Apr-01 00:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.177 (still bad) 2010-Apr-01 00:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.178 (still bad) 2010-Apr-01 00:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.178 (still bad) 2010-Apr-01 00:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.179 (still bad) 2010-Apr-01 00:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.177 (still bad) 2010-Apr-01 00:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.181 (still bad) 2010-Apr-01 00:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Apr-01 00:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Apr-01 00:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.176 (still bad) 2010-Apr-01 00:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.179 (still bad) 2010-Apr-01 00:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.186 (still bad) 2010-Apr-01 00:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.177 (still bad) 2010-Apr-01 00:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.174 (still bad) 2010-Apr-01 00:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.174 (still bad) 2010-Apr-01 00:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.176 (still bad) 2010-Apr-01 00:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.185 (still bad) 2010-Apr-01 00:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.174 (still bad) 2010-Apr-01 00:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.176 (still bad) 2010-Apr-01 00:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.175 (still bad) 2010-Apr-01 00:16:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.528 < 0.75)! 2010-Apr-01 00:16:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.172 1.017 0.991 2010-Apr-01 00:16:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.528 1.145 1.134 0.986 2010-Apr-01 00:16:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.888 1.162 1.002 2010-Apr-01 00:16:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.904 1.020 1.050 2010-Apr-01 00:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.173 (still bad) 2010-Apr-01 00:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.184 (still bad) 2010-Apr-01 00:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.175 (still bad) 2010-Apr-01 00:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.172 (still bad) 2010-Apr-01 00:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.177 (still bad) 2010-Apr-01 00:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.175 (still bad) 2010-Apr-01 00:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.176 (still bad) 2010-Apr-01 00:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.185 (still bad) 2010-Apr-01 00:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.176 (still bad) 2010-Apr-01 00:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.174 (still bad) 2010-Apr-01 00:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.178 (still bad) 2010-Apr-01 00:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.173 (still bad) 2010-Apr-01 00:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.174 (still bad) 2010-Apr-01 00:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.184 (still bad) 2010-Apr-01 00:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.176 (still bad) 2010-Apr-01 00:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.175 (still bad) 2010-Apr-01 00:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.177 (still bad) 2010-Apr-01 00:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.175 (still bad) 2010-Apr-01 00:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.176 (still bad) 2010-Apr-01 00:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.187 (still bad) 2010-Apr-01 00:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.177 (still bad) 2010-Apr-01 00:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.180 (still bad) 2010-Apr-01 00:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.179 (still bad) 2010-Apr-01 00:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.179 (still bad) 2010-Apr-01 00:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.180 (still bad) 2010-Apr-01 00:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.177 (still bad) 2010-Apr-01 00:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.176 (still bad) 2010-Apr-01 00:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.176 (still bad) 2010-Apr-01 00:17:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.523 < 0.75)! 2010-Apr-01 00:17:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.174 1.015 0.986 2010-Apr-01 00:17:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.523 1.148 1.138 0.989 2010-Apr-01 00:17:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.888 1.162 1.001 2010-Apr-01 00:17:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.903 1.021 1.048 2010-Apr-01 00:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.178 (still bad) 2010-Apr-01 00:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.534 and 1.180 (still bad) 2010-Apr-01 00:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.176 (still bad) 2010-Apr-01 00:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Apr-01 00:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.622 and 1.178 (still bad) 2010-Apr-01 00:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.176 (still bad) 2010-Apr-01 00:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.631 and 1.178 (still bad) 2010-Apr-01 00:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.182 (still bad) 2010-Apr-01 00:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.176 (still bad) 2010-Apr-01 00:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.179 (still bad) 2010-Apr-01 00:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.181 (still bad) 2010-Apr-01 00:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.178 (still bad) 2010-Apr-01 00:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.180 (still bad) 2010-Apr-01 00:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.184 (still bad) 2010-Apr-01 00:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.178 (still bad) 2010-Apr-01 00:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.177 (still bad) 2010-Apr-01 00:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.180 (still bad) 2010-Apr-01 00:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.179 (still bad) 2010-Apr-01 00:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.177 (still bad) 2010-Apr-01 00:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.694 and 1.184 (still bad) 2010-Apr-01 00:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.176 (still bad) 2010-Apr-01 00:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.177 (still bad) 2010-Apr-01 00:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.178 (still bad) 2010-Apr-01 00:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.177 (still bad) 2010-Apr-01 00:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.178 (still bad) 2010-Apr-01 00:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.185 (still bad) 2010-Apr-01 00:18:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.762 and 1.176 2010-Apr-01 00:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.587 < 0.75)! 2010-Apr-01 00:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.179 1.017 0.990 2010-Apr-01 00:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.587 1.146 1.138 0.989 2010-Apr-01 00:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.891 1.169 1.005 2010-Apr-01 00:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.906 1.023 1.051 2010-Apr-01 00:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.178 (still bad) 2010-Apr-01 00:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.178 (still bad) 2010-Apr-01 00:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.186 (still bad) 2010-Apr-01 00:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.176 (still bad) 2010-Apr-01 00:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.176 (still bad) 2010-Apr-01 00:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.660 and 1.178 (still bad) 2010-Apr-01 00:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.616 and 1.178 (still bad) 2010-Apr-01 00:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.178 (still bad) 2010-Apr-01 00:19:04 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.760 and 1.184 2010-Apr-01 00:19:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.647 < 0.75)! 2010-Apr-01 00:19:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.179 1.016 0.991 2010-Apr-01 00:19:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.647 1.149 1.136 0.987 2010-Apr-01 00:19:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.888 1.165 1.002 2010-Apr-01 00:19:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.904 1.021 1.048 2010-Apr-01 00:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.626 and 1.175 (still bad) 2010-Apr-01 00:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.177 (still bad) 2010-Apr-01 00:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.610 and 1.175 (still bad) 2010-Apr-01 00:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.615 and 1.177 (still bad) 2010-Apr-01 00:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.177 (still bad) 2010-Apr-01 00:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.578 and 1.174 (still bad) 2010-Apr-01 00:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.176 (still bad) 2010-Apr-01 00:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.174 (still bad) 2010-Apr-01 00:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.663 and 1.176 (still bad) 2010-Apr-01 00:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.579 and 1.179 (still bad) 2010-Apr-01 00:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.178 (still bad) 2010-Apr-01 00:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.176 (still bad) 2010-Apr-01 00:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.178 (still bad) 2010-Apr-01 00:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.176 (still bad) 2010-Apr-01 00:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.177 (still bad) 2010-Apr-01 00:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.182 (still bad) 2010-Apr-01 00:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.182 (still bad) 2010-Apr-01 00:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.181 (still bad) 2010-Apr-01 00:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.180 (still bad) 2010-Apr-01 00:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.177 (still bad) 2010-Apr-01 00:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.177 (still bad) 2010-Apr-01 00:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.175 (still bad) 2010-Apr-01 00:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.177 (still bad) 2010-Apr-01 00:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.174 (still bad) 2010-Apr-01 00:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.176 (still bad) 2010-Apr-01 00:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.174 (still bad) 2010-Apr-01 00:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Apr-01 00:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.178 (still bad) 2010-Apr-01 00:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.177 (still bad) 2010-Apr-01 00:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.176 (still bad) 2010-Apr-01 00:20:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:20:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:20:08 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:20:08 LOG5 end_task: Level: (2) ID = <10361> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 LOG1 fixed_driftmap: New position: year = 2010.2491827008391 RA = 12:57:16.0 RA/Dec = 12:57:48.7 +19:17:08.3 2010-Apr-01 00:20:08 NOTE fixed_driftmap: Correcting ZA to 6:27:17.0 ... 2010-Apr-01 00:20:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4547260653 -CF 2010-Apr-01 00:20:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 00:20:08 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 00:20:08 LOG5 begin_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 00:20:08 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 00:20:08 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 00:20:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 00:20:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:20:08 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 00:20:08 LOG5 begin_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4547260653 -CF 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:20:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.496 < 0.75)! 2010-Apr-01 00:20:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.177 1.017 0.989 2010-Apr-01 00:20:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.496 1.150 1.140 0.988 2010-Apr-01 00:20:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.891 1.165 1.003 2010-Apr-01 00:20:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.904 1.022 1.050 2010-Apr-01 00:20:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 00:20:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 00:20:08 LOG5 end_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2010-Apr-01 00:20:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 00:20:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:20:09 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 00:20:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:20:09 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:20:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:20:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:20:09 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:20:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 00:20:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:20:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:20:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:20:09 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:20:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:20:09 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:20:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:20:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 00:20:09 LOG5 end_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 00:20:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 00:20:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 00:20:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:20:09 LOG5 begin_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:20:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 00:20:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:20:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:20:09 LOG5 end_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 00:20:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:20:09 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 00:20:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:20:09 INFO2 take_data: Starting WAPP 1-second scan: 9100004 2010-Apr-01 00:20:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:20:09 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-Apr-01 00:20:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:20:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 00:20:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15610.00 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:20:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:20:11 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:20:11 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:20:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:20:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:20:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:20:11 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:20:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:20:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:20:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:20:11 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:20:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:20:11 LOG5 finish_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:20:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:20:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:20:11 LOG5 end_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2010-Apr-01 00:20:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2010-Apr-01 00:20:11 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2010-Apr-01 00:20:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:20:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:20:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:20:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:20:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:20:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:20:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:20:12 LOG5 begin_task: Level: (2) ID = <10372> Status = 0 0 0 0 ok 2010-Apr-01 00:20:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:20:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:20:12 INFO2 take_data: Starting WAPP 600-second scan: 9100005 2010-Apr-01 00:20:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:20:12 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2010-Apr-01 00:20:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.615 (still bad) 2010-Apr-01 00:20:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:20:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:20:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15613.00 2010-Apr-01 00:20:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0002.fits 2010-Apr-01 00:20:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0002.fits} 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.615 (still bad) 2010-Apr-01 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.184 (still bad) 2010-Apr-01 00:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.175 (still bad) 2010-Apr-01 00:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.178 (still bad) 2010-Apr-01 00:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.174 (still bad) 2010-Apr-01 00:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.176 (still bad) 2010-Apr-01 00:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.180 (still bad) 2010-Apr-01 00:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.177 (still bad) 2010-Apr-01 00:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.176 (still bad) 2010-Apr-01 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Apr-01 00:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.173 (still bad) 2010-Apr-01 00:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.177 (still bad) 2010-Apr-01 00:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.185 (still bad) 2010-Apr-01 00:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.176 (still bad) 2010-Apr-01 00:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.177 (still bad) 2010-Apr-01 00:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.178 (still bad) 2010-Apr-01 00:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.186 (still bad) 2010-Apr-01 00:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.175 (still bad) 2010-Apr-01 00:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.178 (still bad) 2010-Apr-01 00:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.177 (still bad) 2010-Apr-01 00:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.177 (still bad) 2010-Apr-01 00:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.179 (still bad) 2010-Apr-01 00:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.177 (still bad) 2010-Apr-01 00:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.176 (still bad) 2010-Apr-01 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.176 (still bad) 2010-Apr-01 00:21:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.495 < 0.75)! 2010-Apr-01 00:21:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.179 1.015 0.990 2010-Apr-01 00:21:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.495 1.149 1.136 0.988 2010-Apr-01 00:21:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.892 1.164 1.003 2010-Apr-01 00:21:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.904 1.023 1.051 2010-Apr-01 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.177 (still bad) 2010-Apr-01 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.177 (still bad) 2010-Apr-01 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.178 (still bad) 2010-Apr-01 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.177 (still bad) 2010-Apr-01 00:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.177 (still bad) 2010-Apr-01 00:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.175 (still bad) 2010-Apr-01 00:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.178 (still bad) 2010-Apr-01 00:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.177 (still bad) 2010-Apr-01 00:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.174 (still bad) 2010-Apr-01 00:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.176 (still bad) 2010-Apr-01 00:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.175 (still bad) 2010-Apr-01 00:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.177 (still bad) 2010-Apr-01 00:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.177 (still bad) 2010-Apr-01 00:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.175 (still bad) 2010-Apr-01 00:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.173 (still bad) 2010-Apr-01 00:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.175 (still bad) 2010-Apr-01 00:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.179 (still bad) 2010-Apr-01 00:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.177 (still bad) 2010-Apr-01 00:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.177 (still bad) 2010-Apr-01 00:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Apr-01 00:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.177 (still bad) 2010-Apr-01 00:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.173 (still bad) 2010-Apr-01 00:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.180 (still bad) 2010-Apr-01 00:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.178 (still bad) 2010-Apr-01 00:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.176 (still bad) 2010-Apr-01 00:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.176 (still bad) 2010-Apr-01 00:22:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Apr-01 00:22:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.176 1.017 0.991 2010-Apr-01 00:22:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.149 1.137 0.989 2010-Apr-01 00:22:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.889 1.164 1.001 2010-Apr-01 00:22:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.905 1.024 1.052 2010-Apr-01 00:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.178 (still bad) 2010-Apr-01 00:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.176 (still bad) 2010-Apr-01 00:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.175 (still bad) 2010-Apr-01 00:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.174 (still bad) 2010-Apr-01 00:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Apr-01 00:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.176 (still bad) 2010-Apr-01 00:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.178 (still bad) 2010-Apr-01 00:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.178 (still bad) 2010-Apr-01 00:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Apr-01 00:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.178 (still bad) 2010-Apr-01 00:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.178 (still bad) 2010-Apr-01 00:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.180 (still bad) 2010-Apr-01 00:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.189 (still bad) 2010-Apr-01 00:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.181 (still bad) 2010-Apr-01 00:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.178 (still bad) 2010-Apr-01 00:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.182 (still bad) 2010-Apr-01 00:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.176 (still bad) 2010-Apr-01 00:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.519 and 1.180 (still bad) 2010-Apr-01 00:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.189 (still bad) 2010-Apr-01 00:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.180 (still bad) 2010-Apr-01 00:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Apr-01 00:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.182 (still bad) 2010-Apr-01 00:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.181 (still bad) 2010-Apr-01 00:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.181 (still bad) 2010-Apr-01 00:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.181 (still bad) 2010-Apr-01 00:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.179 (still bad) 2010-Apr-01 00:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.180 (still bad) 2010-Apr-01 00:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.181 (still bad) 2010-Apr-01 00:23:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.504 < 0.75)! 2010-Apr-01 00:23:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.177 1.027 1.000 2010-Apr-01 00:23:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.504 1.148 1.135 0.988 2010-Apr-01 00:23:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.131 0.889 1.165 1.003 2010-Apr-01 00:23:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.906 1.024 1.053 2010-Apr-01 00:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Apr-01 00:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.181 (still bad) 2010-Apr-01 00:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Apr-01 00:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.178 (still bad) 2010-Apr-01 00:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.180 (still bad) 2010-Apr-01 00:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Apr-01 00:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.181 (still bad) 2010-Apr-01 00:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.178 (still bad) 2010-Apr-01 00:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.178 (still bad) 2010-Apr-01 00:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.180 (still bad) 2010-Apr-01 00:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.183 (still bad) 2010-Apr-01 00:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.186 (still bad) 2010-Apr-01 00:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.181 (still bad) 2010-Apr-01 00:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.183 (still bad) 2010-Apr-01 00:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.180 (still bad) 2010-Apr-01 00:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.180 (still bad) 2010-Apr-01 00:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.182 (still bad) 2010-Apr-01 00:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.178 (still bad) 2010-Apr-01 00:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Apr-01 00:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.177 (still bad) 2010-Apr-01 00:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.178 (still bad) 2010-Apr-01 00:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.178 (still bad) 2010-Apr-01 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.181 (still bad) 2010-Apr-01 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.180 (still bad) 2010-Apr-01 00:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.178 (still bad) 2010-Apr-01 00:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.180 (still bad) 2010-Apr-01 00:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.179 (still bad) 2010-Apr-01 00:24:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.499 < 0.75)! 2010-Apr-01 00:24:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.177 1.015 0.989 2010-Apr-01 00:24:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.499 1.152 1.139 0.989 2010-Apr-01 00:24:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.892 1.167 1.004 2010-Apr-01 00:24:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.905 1.026 1.053 2010-Apr-01 00:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.188 (still bad) 2010-Apr-01 00:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.180 (still bad) 2010-Apr-01 00:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.177 (still bad) 2010-Apr-01 00:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.181 (still bad) 2010-Apr-01 00:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.177 (still bad) 2010-Apr-01 00:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.178 (still bad) 2010-Apr-01 00:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.187 (still bad) 2010-Apr-01 00:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.176 (still bad) 2010-Apr-01 00:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.183 (still bad) 2010-Apr-01 00:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.181 (still bad) 2010-Apr-01 00:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.181 (still bad) 2010-Apr-01 00:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.188 (still bad) 2010-Apr-01 00:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.179 (still bad) 2010-Apr-01 00:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.178 (still bad) 2010-Apr-01 00:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.180 (still bad) 2010-Apr-01 00:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.176 (still bad) 2010-Apr-01 00:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.179 (still bad) 2010-Apr-01 00:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.187 (still bad) 2010-Apr-01 00:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.178 (still bad) 2010-Apr-01 00:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.178 (still bad) 2010-Apr-01 00:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Apr-01 00:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.177 (still bad) 2010-Apr-01 00:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.177 (still bad) 2010-Apr-01 00:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.187 (still bad) 2010-Apr-01 00:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.180 (still bad) 2010-Apr-01 00:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.177 (still bad) 2010-Apr-01 00:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.180 (still bad) 2010-Apr-01 00:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.177 (still bad) 2010-Apr-01 00:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.177 (still bad) 2010-Apr-01 00:25:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.507 < 0.75)! 2010-Apr-01 00:25:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.186 1.022 0.999 2010-Apr-01 00:25:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.507 1.158 1.144 0.996 2010-Apr-01 00:25:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.892 1.167 1.003 2010-Apr-01 00:25:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.905 1.030 1.052 2010-Apr-01 00:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.179 (still bad) 2010-Apr-01 00:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Apr-01 00:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.179 (still bad) 2010-Apr-01 00:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.176 (still bad) 2010-Apr-01 00:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.187 (still bad) 2010-Apr-01 00:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.179 (still bad) 2010-Apr-01 00:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.176 (still bad) 2010-Apr-01 00:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.178 (still bad) 2010-Apr-01 00:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.178 (still bad) 2010-Apr-01 00:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.177 (still bad) 2010-Apr-01 00:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.184 (still bad) 2010-Apr-01 00:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.179 (still bad) 2010-Apr-01 00:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.177 (still bad) 2010-Apr-01 00:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.175 (still bad) 2010-Apr-01 00:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.173 (still bad) 2010-Apr-01 00:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.177 (still bad) 2010-Apr-01 00:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.183 (still bad) 2010-Apr-01 00:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.177 (still bad) 2010-Apr-01 00:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.176 (still bad) 2010-Apr-01 00:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.179 (still bad) 2010-Apr-01 00:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.178 (still bad) 2010-Apr-01 00:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.177 (still bad) 2010-Apr-01 00:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Apr-01 00:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.175 (still bad) 2010-Apr-01 00:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.176 (still bad) 2010-Apr-01 00:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.177 (still bad) 2010-Apr-01 00:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.177 (still bad) 2010-Apr-01 00:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.176 (still bad) 2010-Apr-01 00:26:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.505 < 0.75)! 2010-Apr-01 00:26:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.179 1.016 0.991 2010-Apr-01 00:26:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.505 1.152 1.140 0.990 2010-Apr-01 00:26:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.890 1.166 1.005 2010-Apr-01 00:26:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.910 1.029 1.055 2010-Apr-01 00:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.178 (still bad) 2010-Apr-01 00:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.180 (still bad) 2010-Apr-01 00:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.180 (still bad) 2010-Apr-01 00:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.177 (still bad) 2010-Apr-01 00:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.181 (still bad) 2010-Apr-01 00:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.181 (still bad) 2010-Apr-01 00:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.178 (still bad) 2010-Apr-01 00:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.177 (still bad) 2010-Apr-01 00:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.180 (still bad) 2010-Apr-01 00:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.177 (still bad) 2010-Apr-01 00:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.178 (still bad) 2010-Apr-01 00:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.177 (still bad) 2010-Apr-01 00:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.176 (still bad) 2010-Apr-01 00:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.177 (still bad) 2010-Apr-01 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.179 (still bad) 2010-Apr-01 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.177 (still bad) 2010-Apr-01 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.680 and 1.178 (still bad) 2010-Apr-01 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.178 (still bad) 2010-Apr-01 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.172 (still bad) 2010-Apr-01 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.174 (still bad) 2010-Apr-01 00:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.657 and 1.178 (still bad) 2010-Apr-01 00:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.175 (still bad) 2010-Apr-01 00:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.176 (still bad) 2010-Apr-01 00:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.179 (still bad) 2010-Apr-01 00:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.744 and 1.175 (still bad) 2010-Apr-01 00:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.685 and 1.175 (still bad) 2010-Apr-01 00:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.175 (still bad) 2010-Apr-01 00:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.595 and 1.176 (still bad) 2010-Apr-01 00:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.178 (still bad) 2010-Apr-01 00:27:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.508 < 0.75)! 2010-Apr-01 00:27:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.183 1.016 0.993 2010-Apr-01 00:27:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.508 1.151 1.138 0.992 2010-Apr-01 00:27:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.893 1.164 1.005 2010-Apr-01 00:27:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.911 1.031 1.058 2010-Apr-01 00:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.178 (still bad) 2010-Apr-01 00:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.175 (still bad) 2010-Apr-01 00:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.178 (still bad) 2010-Apr-01 00:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.175 (still bad) 2010-Apr-01 00:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.177 (still bad) 2010-Apr-01 00:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Apr-01 00:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.176 (still bad) 2010-Apr-01 00:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.178 (still bad) 2010-Apr-01 00:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.177 (still bad) 2010-Apr-01 00:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.179 (still bad) 2010-Apr-01 00:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.184 (still bad) 2010-Apr-01 00:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.179 (still bad) 2010-Apr-01 00:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.179 (still bad) 2010-Apr-01 00:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.183 (still bad) 2010-Apr-01 00:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.177 (still bad) 2010-Apr-01 00:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.179 (still bad) 2010-Apr-01 00:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.186 (still bad) 2010-Apr-01 00:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.179 (still bad) 2010-Apr-01 00:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.177 (still bad) 2010-Apr-01 00:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.180 (still bad) 2010-Apr-01 00:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.177 (still bad) 2010-Apr-01 00:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.178 (still bad) 2010-Apr-01 00:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.185 (still bad) 2010-Apr-01 00:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.176 (still bad) 2010-Apr-01 00:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.176 (still bad) 2010-Apr-01 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.179 (still bad) 2010-Apr-01 00:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.177 (still bad) 2010-Apr-01 00:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.186 (still bad) 2010-Apr-01 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.178 (still bad) 2010-Apr-01 00:28:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.495 < 0.75)! 2010-Apr-01 00:28:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.175 1.015 0.991 2010-Apr-01 00:28:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.495 1.149 1.140 0.992 2010-Apr-01 00:28:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.889 1.164 1.004 2010-Apr-01 00:28:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.908 1.030 1.053 2010-Apr-01 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.179 (still bad) 2010-Apr-01 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.177 (still bad) 2010-Apr-01 00:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.177 (still bad) 2010-Apr-01 00:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.187 (still bad) 2010-Apr-01 00:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.180 (still bad) 2010-Apr-01 00:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.178 (still bad) 2010-Apr-01 00:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.181 (still bad) 2010-Apr-01 00:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.177 (still bad) 2010-Apr-01 00:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.178 (still bad) 2010-Apr-01 00:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.188 (still bad) 2010-Apr-01 00:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.181 (still bad) 2010-Apr-01 00:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.182 (still bad) 2010-Apr-01 00:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.187 (still bad) 2010-Apr-01 00:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.185 (still bad) 2010-Apr-01 00:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.186 (still bad) 2010-Apr-01 00:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.195 (still bad) 2010-Apr-01 00:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.188 (still bad) 2010-Apr-01 00:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.185 (still bad) 2010-Apr-01 00:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.186 (still bad) 2010-Apr-01 00:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.179 (still bad) 2010-Apr-01 00:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.179 (still bad) 2010-Apr-01 00:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.188 (still bad) 2010-Apr-01 00:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.178 (still bad) 2010-Apr-01 00:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.185 (still bad) 2010-Apr-01 00:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.192 (still bad) 2010-Apr-01 00:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.195 (still bad) 2010-Apr-01 00:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.195 (still bad) 2010-Apr-01 00:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.196 (still bad) 2010-Apr-01 00:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.193 (still bad) 2010-Apr-01 00:29:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.498 < 0.75)! 2010-Apr-01 00:29:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.177 1.015 0.991 2010-Apr-01 00:29:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.498 1.153 1.141 0.991 2010-Apr-01 00:29:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.893 1.184 1.023 2010-Apr-01 00:29:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.910 1.031 1.056 2010-Apr-01 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.183 (still bad) 2010-Apr-01 00:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.179 (still bad) 2010-Apr-01 00:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.178 (still bad) 2010-Apr-01 00:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.182 (still bad) 2010-Apr-01 00:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.178 (still bad) 2010-Apr-01 00:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.178 (still bad) 2010-Apr-01 00:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.181 (still bad) 2010-Apr-01 00:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.180 (still bad) 2010-Apr-01 00:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.181 (still bad) 2010-Apr-01 00:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.181 (still bad) 2010-Apr-01 00:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.178 (still bad) 2010-Apr-01 00:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.177 (still bad) 2010-Apr-01 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.179 (still bad) 2010-Apr-01 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.181 (still bad) 2010-Apr-01 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.181 (still bad) 2010-Apr-01 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.182 (still bad) 2010-Apr-01 00:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.179 (still bad) 2010-Apr-01 00:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.179 (still bad) 2010-Apr-01 00:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.179 (still bad) 2010-Apr-01 00:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.179 (still bad) 2010-Apr-01 00:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.178 (still bad) 2010-Apr-01 00:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.526 and 1.179 (still bad) 2010-Apr-01 00:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.178 (still bad) 2010-Apr-01 00:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.179 (still bad) 2010-Apr-01 00:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.180 (still bad) 2010-Apr-01 00:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.181 (still bad) 2010-Apr-01 00:30:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:30:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:30:13 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:30:13 LOG5 end_task: Level: (2) ID = <10372> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG1 fixed_driftmap: New position: year = 2010.2492018721323 RA = 13:07:23.8 RA/Dec = 13:07:56.3 +19:17:10.4 2010-Apr-01 00:30:13 NOTE fixed_driftmap: Correcting ZA to 6:27:33.9 ... 2010-Apr-01 00:30:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4594077855 -CF 2010-Apr-01 00:30:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 00:30:13 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 00:30:13 LOG5 begin_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 00:30:13 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 00:30:13 LOG5 begin_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 00:30:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 00:30:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:30:13 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 00:30:13 LOG5 begin_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4594077855 -CF 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 00:30:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 00:30:13 LOG5 end_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 00:30:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:30:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 00:30:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:30:13 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2010-Apr-01 00:30:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:30:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:30:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:30:14 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:30:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 00:30:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:30:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:30:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:30:14 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:30:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:30:14 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:30:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:30:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 00:30:14 LOG5 end_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 00:30:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 00:30:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 00:30:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:30:14 LOG5 begin_task: Level: (3) ID = <10379> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:30:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 00:30:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:30:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:30:14 LOG5 end_task: Level: (3) ID = <10379> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 00:30:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:30:14 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 00:30:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:30:14 INFO2 take_data: Starting WAPP 1-second scan: 9100006 2010-Apr-01 00:30:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:30:14 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-Apr-01 00:30:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:30:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 00:30:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16215.00 2010-Apr-01 00:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.180 (still bad) 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:30:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:30:16 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:30:16 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:30:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:30:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:30:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:30:16 LOG5 begin_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:30:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:30:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:30:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:30:16 LOG5 end_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:30:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:30:16 LOG5 finish_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:30:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:30:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:30:16 LOG5 end_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2010-Apr-01 00:30:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2010-Apr-01 00:30:16 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2010-Apr-01 00:30:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:30:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:30:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:30:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:30:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:30:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:30:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:30:17 LOG5 begin_task: Level: (2) ID = <10383> Status = 0 0 0 0 ok 2010-Apr-01 00:30:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:30:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:30:17 INFO2 take_data: Starting WAPP 600-second scan: 9100007 2010-Apr-01 00:30:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:30:17 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2010-Apr-01 00:30:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:30:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:30:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.623 (still bad) 2010-Apr-01 00:30:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16218.00 2010-Apr-01 00:30:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0003.fits 2010-Apr-01 00:30:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0003.fits} 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.597 (still bad) 2010-Apr-01 00:30:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.500 < 0.75)! 2010-Apr-01 00:30:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.185 1.017 0.993 2010-Apr-01 00:30:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.500 1.149 1.134 0.988 2010-Apr-01 00:30:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.889 1.165 1.006 2010-Apr-01 00:30:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.912 1.032 1.058 2010-Apr-01 00:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.182 (still bad) 2010-Apr-01 00:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.183 (still bad) 2010-Apr-01 00:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.189 (still bad) 2010-Apr-01 00:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.184 (still bad) 2010-Apr-01 00:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.183 (still bad) 2010-Apr-01 00:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.184 (still bad) 2010-Apr-01 00:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.183 (still bad) 2010-Apr-01 00:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.185 (still bad) 2010-Apr-01 00:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.188 (still bad) 2010-Apr-01 00:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.183 (still bad) 2010-Apr-01 00:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.181 (still bad) 2010-Apr-01 00:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.183 (still bad) 2010-Apr-01 00:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.182 (still bad) 2010-Apr-01 00:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.182 (still bad) 2010-Apr-01 00:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.188 (still bad) 2010-Apr-01 00:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.189 (still bad) 2010-Apr-01 00:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.183 (still bad) 2010-Apr-01 00:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.182 (still bad) 2010-Apr-01 00:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.181 (still bad) 2010-Apr-01 00:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.183 (still bad) 2010-Apr-01 00:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.188 (still bad) 2010-Apr-01 00:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.180 (still bad) 2010-Apr-01 00:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.181 (still bad) 2010-Apr-01 00:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.182 (still bad) 2010-Apr-01 00:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.721 and 1.180 (still bad) 2010-Apr-01 00:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.184 (still bad) 2010-Apr-01 00:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.641 and 1.190 (still bad) 2010-Apr-01 00:31:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.754 and 1.185 2010-Apr-01 00:31:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.666 < 0.75)! 2010-Apr-01 00:31:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.182 1.015 0.991 2010-Apr-01 00:31:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.666 1.162 1.146 1.000 2010-Apr-01 00:31:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.139 0.896 1.168 1.005 2010-Apr-01 00:31:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.908 1.031 1.056 2010-Apr-01 00:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.648 and 1.181 (still bad) 2010-Apr-01 00:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.184 (still bad) 2010-Apr-01 00:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.190 (still bad) 2010-Apr-01 00:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.189 (still bad) 2010-Apr-01 00:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.192 (still bad) 2010-Apr-01 00:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.202 (still bad) 2010-Apr-01 00:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.208 (still bad) 2010-Apr-01 00:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.575 and 1.216 (still bad) 2010-Apr-01 00:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.230 (still bad) 2010-Apr-01 00:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.224 (still bad) 2010-Apr-01 00:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.223 (still bad) 2010-Apr-01 00:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.223 (still bad) 2010-Apr-01 00:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.212 (still bad) 2010-Apr-01 00:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.207 (still bad) 2010-Apr-01 00:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.688 and 1.208 (still bad) 2010-Apr-01 00:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.679 and 1.191 (still bad) 2010-Apr-01 00:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.185 (still bad) 2010-Apr-01 00:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.666 and 1.184 (still bad) 2010-Apr-01 00:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.654 and 1.181 (still bad) 2010-Apr-01 00:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.624 and 1.184 (still bad) 2010-Apr-01 00:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.608 and 1.190 (still bad) 2010-Apr-01 00:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.537 and 1.193 (still bad) 2010-Apr-01 00:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.192 (still bad) 2010-Apr-01 00:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.196 (still bad) 2010-Apr-01 00:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.190 (still bad) 2010-Apr-01 00:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.187 (still bad) 2010-Apr-01 00:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.190 (still bad) 2010-Apr-01 00:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.181 (still bad) 2010-Apr-01 00:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.180 (still bad) 2010-Apr-01 00:32:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.474 < 0.75)! 2010-Apr-01 00:32:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.185 1.017 0.995 2010-Apr-01 00:32:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.474 1.154 1.138 0.992 2010-Apr-01 00:32:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.894 1.172 1.009 2010-Apr-01 00:32:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.912 1.034 1.059 2010-Apr-01 00:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.182 (still bad) 2010-Apr-01 00:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.184 (still bad) 2010-Apr-01 00:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.191 (still bad) 2010-Apr-01 00:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.182 (still bad) 2010-Apr-01 00:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.181 (still bad) 2010-Apr-01 00:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.184 (still bad) 2010-Apr-01 00:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.182 (still bad) 2010-Apr-01 00:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.183 (still bad) 2010-Apr-01 00:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.185 (still bad) 2010-Apr-01 00:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.183 (still bad) 2010-Apr-01 00:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.182 (still bad) 2010-Apr-01 00:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.182 (still bad) 2010-Apr-01 00:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.181 (still bad) 2010-Apr-01 00:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.183 (still bad) 2010-Apr-01 00:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.671 and 1.182 (still bad) 2010-Apr-01 00:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.181 (still bad) 2010-Apr-01 00:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.690 and 1.181 (still bad) 2010-Apr-01 00:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.180 (still bad) 2010-Apr-01 00:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.182 (still bad) 2010-Apr-01 00:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.664 and 1.183 (still bad) 2010-Apr-01 00:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.667 and 1.184 (still bad) 2010-Apr-01 00:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.184 (still bad) 2010-Apr-01 00:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.186 (still bad) 2010-Apr-01 00:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.185 (still bad) 2010-Apr-01 00:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.621 and 1.187 (still bad) 2010-Apr-01 00:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.596 and 1.190 (still bad) 2010-Apr-01 00:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.602 and 1.194 (still bad) 2010-Apr-01 00:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.190 (still bad) 2010-Apr-01 00:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.194 (still bad) 2010-Apr-01 00:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.191 (still bad) 2010-Apr-01 00:33:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.476 < 0.75)! 2010-Apr-01 00:33:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.191 1.017 0.995 2010-Apr-01 00:33:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.476 1.153 1.137 0.992 2010-Apr-01 00:33:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.891 1.166 1.005 2010-Apr-01 00:33:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.909 1.032 1.054 2010-Apr-01 00:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.187 (still bad) 2010-Apr-01 00:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.189 (still bad) 2010-Apr-01 00:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.185 (still bad) 2010-Apr-01 00:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.185 (still bad) 2010-Apr-01 00:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.184 (still bad) 2010-Apr-01 00:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.183 (still bad) 2010-Apr-01 00:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.185 (still bad) 2010-Apr-01 00:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.184 (still bad) 2010-Apr-01 00:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.182 (still bad) 2010-Apr-01 00:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.185 (still bad) 2010-Apr-01 00:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.182 (still bad) 2010-Apr-01 00:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.183 (still bad) 2010-Apr-01 00:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.183 (still bad) 2010-Apr-01 00:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.183 (still bad) 2010-Apr-01 00:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.185 (still bad) 2010-Apr-01 00:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.184 (still bad) 2010-Apr-01 00:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.186 (still bad) 2010-Apr-01 00:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.191 (still bad) 2010-Apr-01 00:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.193 (still bad) 2010-Apr-01 00:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.193 (still bad) 2010-Apr-01 00:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.191 (still bad) 2010-Apr-01 00:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.189 (still bad) 2010-Apr-01 00:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.188 (still bad) 2010-Apr-01 00:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.184 (still bad) 2010-Apr-01 00:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.190 (still bad) 2010-Apr-01 00:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.183 (still bad) 2010-Apr-01 00:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.181 (still bad) 2010-Apr-01 00:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.183 (still bad) 2010-Apr-01 00:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.180 (still bad) 2010-Apr-01 00:34:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.558 < 0.75)! 2010-Apr-01 00:34:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.184 1.018 0.995 2010-Apr-01 00:34:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.558 1.152 1.136 0.991 2010-Apr-01 00:34:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.892 1.181 1.017 2010-Apr-01 00:34:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.912 1.031 1.059 2010-Apr-01 00:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.516 and 1.193 (still bad) 2010-Apr-01 00:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.185 (still bad) 2010-Apr-01 00:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.184 (still bad) 2010-Apr-01 00:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.189 (still bad) 2010-Apr-01 00:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.187 (still bad) 2010-Apr-01 00:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.184 (still bad) 2010-Apr-01 00:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.194 (still bad) 2010-Apr-01 00:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.637 and 1.182 (still bad) 2010-Apr-01 00:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.183 (still bad) 2010-Apr-01 00:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.188 (still bad) 2010-Apr-01 00:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.186 (still bad) 2010-Apr-01 00:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.189 (still bad) 2010-Apr-01 00:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.199 (still bad) 2010-Apr-01 00:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.190 (still bad) 2010-Apr-01 00:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.188 (still bad) 2010-Apr-01 00:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.190 (still bad) 2010-Apr-01 00:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.188 (still bad) 2010-Apr-01 00:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.188 (still bad) 2010-Apr-01 00:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.195 (still bad) 2010-Apr-01 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.185 (still bad) 2010-Apr-01 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.182 (still bad) 2010-Apr-01 00:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.527 and 1.186 (still bad) 2010-Apr-01 00:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.185 (still bad) 2010-Apr-01 00:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.581 and 1.182 (still bad) 2010-Apr-01 00:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.549 and 1.189 (still bad) 2010-Apr-01 00:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.525 and 1.182 (still bad) 2010-Apr-01 00:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.181 (still bad) 2010-Apr-01 00:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.185 (still bad) 2010-Apr-01 00:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.185 (still bad) 2010-Apr-01 00:35:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.498 < 0.75)! 2010-Apr-01 00:35:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.186 1.018 0.995 2010-Apr-01 00:35:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.498 1.155 1.144 0.997 2010-Apr-01 00:35:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.893 1.180 1.013 2010-Apr-01 00:35:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.910 1.034 1.057 2010-Apr-01 00:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.191 (still bad) 2010-Apr-01 00:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.185 (still bad) 2010-Apr-01 00:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.185 (still bad) 2010-Apr-01 00:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.533 and 1.187 (still bad) 2010-Apr-01 00:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.183 (still bad) 2010-Apr-01 00:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.190 (still bad) 2010-Apr-01 00:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.197 (still bad) 2010-Apr-01 00:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.193 (still bad) 2010-Apr-01 00:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.189 (still bad) 2010-Apr-01 00:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.187 (still bad) 2010-Apr-01 00:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.185 (still bad) 2010-Apr-01 00:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.185 (still bad) 2010-Apr-01 00:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.195 (still bad) 2010-Apr-01 00:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.183 (still bad) 2010-Apr-01 00:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.188 (still bad) 2010-Apr-01 00:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.185 (still bad) 2010-Apr-01 00:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.186 (still bad) 2010-Apr-01 00:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.187 (still bad) 2010-Apr-01 00:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.190 (still bad) 2010-Apr-01 00:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.185 (still bad) 2010-Apr-01 00:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.187 (still bad) 2010-Apr-01 00:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.186 (still bad) 2010-Apr-01 00:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.183 (still bad) 2010-Apr-01 00:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.184 (still bad) 2010-Apr-01 00:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.186 (still bad) 2010-Apr-01 00:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.187 (still bad) 2010-Apr-01 00:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.187 (still bad) 2010-Apr-01 00:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.187 (still bad) 2010-Apr-01 00:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.188 (still bad) 2010-Apr-01 00:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.191 (still bad) 2010-Apr-01 00:36:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.484 < 0.75)! 2010-Apr-01 00:36:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.189 1.020 0.996 2010-Apr-01 00:36:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.484 1.155 1.140 0.992 2010-Apr-01 00:36:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.894 1.168 1.009 2010-Apr-01 00:36:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.913 1.039 1.060 2010-Apr-01 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.186 (still bad) 2010-Apr-01 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.188 (still bad) 2010-Apr-01 00:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.187 (still bad) 2010-Apr-01 00:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.186 (still bad) 2010-Apr-01 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.186 (still bad) 2010-Apr-01 00:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.187 (still bad) 2010-Apr-01 00:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.183 (still bad) 2010-Apr-01 00:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.183 (still bad) 2010-Apr-01 00:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.182 (still bad) 2010-Apr-01 00:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.184 (still bad) 2010-Apr-01 00:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.182 (still bad) 2010-Apr-01 00:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.184 (still bad) 2010-Apr-01 00:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.182 (still bad) 2010-Apr-01 00:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.182 (still bad) 2010-Apr-01 00:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.181 (still bad) 2010-Apr-01 00:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.179 (still bad) 2010-Apr-01 00:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.182 (still bad) 2010-Apr-01 00:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.181 (still bad) 2010-Apr-01 00:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.181 (still bad) 2010-Apr-01 00:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.181 (still bad) 2010-Apr-01 00:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.181 (still bad) 2010-Apr-01 00:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.183 (still bad) 2010-Apr-01 00:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.181 (still bad) 2010-Apr-01 00:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.183 (still bad) 2010-Apr-01 00:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.180 (still bad) 2010-Apr-01 00:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.181 (still bad) 2010-Apr-01 00:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.179 (still bad) 2010-Apr-01 00:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.181 (still bad) 2010-Apr-01 00:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.182 (still bad) 2010-Apr-01 00:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.182 (still bad) 2010-Apr-01 00:37:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Apr-01 00:37:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.183 1.026 1.002 2010-Apr-01 00:37:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.153 1.138 0.991 2010-Apr-01 00:37:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.890 1.164 1.005 2010-Apr-01 00:37:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.912 1.039 1.057 2010-Apr-01 00:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.182 (still bad) 2010-Apr-01 00:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.512 and 1.181 (still bad) 2010-Apr-01 00:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.182 (still bad) 2010-Apr-01 00:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.192 (still bad) 2010-Apr-01 00:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.182 (still bad) 2010-Apr-01 00:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.510 and 1.180 (still bad) 2010-Apr-01 00:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.182 (still bad) 2010-Apr-01 00:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.181 (still bad) 2010-Apr-01 00:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.184 (still bad) 2010-Apr-01 00:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.189 (still bad) 2010-Apr-01 00:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.182 (still bad) 2010-Apr-01 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.179 (still bad) 2010-Apr-01 00:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.182 (still bad) 2010-Apr-01 00:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.180 (still bad) 2010-Apr-01 00:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.183 (still bad) 2010-Apr-01 00:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.192 (still bad) 2010-Apr-01 00:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.184 (still bad) 2010-Apr-01 00:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.186 (still bad) 2010-Apr-01 00:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.184 (still bad) 2010-Apr-01 00:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.186 (still bad) 2010-Apr-01 00:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.185 (still bad) 2010-Apr-01 00:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.186 (still bad) 2010-Apr-01 00:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.183 (still bad) 2010-Apr-01 00:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.181 (still bad) 2010-Apr-01 00:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.183 (still bad) 2010-Apr-01 00:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.180 (still bad) 2010-Apr-01 00:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.185 (still bad) 2010-Apr-01 00:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.188 (still bad) 2010-Apr-01 00:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.192 (still bad) 2010-Apr-01 00:38:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.476 < 0.75)! 2010-Apr-01 00:38:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.197 1.019 0.996 2010-Apr-01 00:38:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.476 1.151 1.136 0.989 2010-Apr-01 00:38:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.890 1.172 1.012 2010-Apr-01 00:38:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.912 1.038 1.059 2010-Apr-01 00:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.204 (still bad) 2010-Apr-01 00:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.208 (still bad) 2010-Apr-01 00:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.213 (still bad) 2010-Apr-01 00:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.222 (still bad) 2010-Apr-01 00:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.214 (still bad) 2010-Apr-01 00:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.209 (still bad) 2010-Apr-01 00:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.207 (still bad) 2010-Apr-01 00:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.200 (still bad) 2010-Apr-01 00:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.194 (still bad) 2010-Apr-01 00:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.195 (still bad) 2010-Apr-01 00:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.187 (still bad) 2010-Apr-01 00:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.179 (still bad) 2010-Apr-01 00:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.183 (still bad) 2010-Apr-01 00:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.532 and 1.179 (still bad) 2010-Apr-01 00:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.179 (still bad) 2010-Apr-01 00:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.190 (still bad) 2010-Apr-01 00:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.182 (still bad) 2010-Apr-01 00:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.178 (still bad) 2010-Apr-01 00:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.183 (still bad) 2010-Apr-01 00:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.179 (still bad) 2010-Apr-01 00:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.181 (still bad) 2010-Apr-01 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.182 (still bad) 2010-Apr-01 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.511 and 1.179 (still bad) 2010-Apr-01 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.181 (still bad) 2010-Apr-01 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.177 (still bad) 2010-Apr-01 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.180 (still bad) 2010-Apr-01 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.188 (still bad) 2010-Apr-01 00:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.183 (still bad) 2010-Apr-01 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.520 and 1.179 (still bad) 2010-Apr-01 00:39:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.523 < 0.75)! 2010-Apr-01 00:39:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.182 1.020 0.996 2010-Apr-01 00:39:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.523 1.152 1.139 0.992 2010-Apr-01 00:39:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.893 1.168 1.005 2010-Apr-01 00:39:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.910 1.035 1.057 2010-Apr-01 00:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.179 (still bad) 2010-Apr-01 00:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.182 (still bad) 2010-Apr-01 00:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.191 (still bad) 2010-Apr-01 00:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.181 (still bad) 2010-Apr-01 00:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.181 (still bad) 2010-Apr-01 00:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.181 (still bad) 2010-Apr-01 00:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.180 (still bad) 2010-Apr-01 00:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.182 (still bad) 2010-Apr-01 00:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.190 (still bad) 2010-Apr-01 00:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.183 (still bad) 2010-Apr-01 00:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.180 (still bad) 2010-Apr-01 00:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.186 (still bad) 2010-Apr-01 00:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.181 (still bad) 2010-Apr-01 00:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.181 (still bad) 2010-Apr-01 00:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.188 (still bad) 2010-Apr-01 00:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.182 (still bad) 2010-Apr-01 00:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.178 (still bad) 2010-Apr-01 00:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.181 (still bad) 2010-Apr-01 00:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.179 (still bad) 2010-Apr-01 00:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.180 (still bad) 2010-Apr-01 00:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.188 (still bad) 2010-Apr-01 00:40:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:40:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:40:18 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:40:18 LOG5 end_task: Level: (2) ID = <10383> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG1 fixed_driftmap: New position: year = 2010.2492210434255 RA = 13:17:31.9 RA/Dec = 13:18:04.1 +19:17:12.9 2010-Apr-01 00:40:18 NOTE fixed_driftmap: Correcting ZA to 6:27:53.9 ... 2010-Apr-01 00:40:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4649761750 -CF 2010-Apr-01 00:40:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 00:40:18 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 00:40:18 LOG5 begin_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 00:40:18 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 00:40:18 LOG5 begin_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 00:40:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 00:40:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:40:18 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 00:40:18 LOG5 begin_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4649761750 -CF 2010-Apr-01 00:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.183 (still bad) 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 00:40:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 00:40:18 LOG5 end_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 00:40:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:40:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 00:40:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:40:18 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2010-Apr-01 00:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:40:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:40:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:40:19 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:40:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 00:40:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:40:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:40:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:40:19 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:40:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:40:19 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:40:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:40:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 00:40:19 LOG5 end_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 00:40:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 00:40:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 00:40:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:40:19 LOG5 begin_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:40:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 00:40:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:40:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:40:19 LOG5 end_task: Level: (3) ID = <10390> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 00:40:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:40:19 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 00:40:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:40:19 INFO2 take_data: Starting WAPP 1-second scan: 9100008 2010-Apr-01 00:40:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:40:19 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-Apr-01 00:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:40:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 00:40:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16820.00 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:40:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:40:21 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-Apr-01 00:40:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:40:21 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-Apr-01 00:40:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:40:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:40:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:40:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:40:21 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2010-Apr-01 00:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.644 and 1.622 (still bad) 2010-Apr-01 00:40:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:40:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:40:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:40:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:40:22 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:40:22 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:40:22 LOG5 finish_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2010-Apr-01 00:40:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:40:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:40:22 LOG5 end_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2010-Apr-01 00:40:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2010-Apr-01 00:40:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:40:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:40:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:40:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:40:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:40:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:40:22 LOG5 begin_task: Level: (2) ID = <10394> Status = 0 0 0 0 ok 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:40:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:40:22 INFO2 take_data: Starting WAPP 600-second scan: 9100009 2010-Apr-01 00:40:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:40:22 LOG5 begin_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2010-Apr-01 00:40:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:40:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:40:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16823.00 2010-Apr-01 00:40:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0004.fits 2010-Apr-01 00:40:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0004.fits} 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.181 (still bad) 2010-Apr-01 00:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.183 (still bad) 2010-Apr-01 00:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.190 (still bad) 2010-Apr-01 00:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.186 (still bad) 2010-Apr-01 00:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.184 (still bad) 2010-Apr-01 00:40:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.497 < 0.75)! 2010-Apr-01 00:40:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.187 1.042 1.022 2010-Apr-01 00:40:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.497 1.154 1.140 0.993 2010-Apr-01 00:40:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.134 0.893 1.167 1.007 2010-Apr-01 00:40:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.914 1.039 1.060 2010-Apr-01 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.182 (still bad) 2010-Apr-01 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.182 (still bad) 2010-Apr-01 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.192 (still bad) 2010-Apr-01 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.187 (still bad) 2010-Apr-01 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.185 (still bad) 2010-Apr-01 00:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.557 and 1.188 (still bad) 2010-Apr-01 00:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.182 (still bad) 2010-Apr-01 00:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.185 (still bad) 2010-Apr-01 00:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.190 (still bad) 2010-Apr-01 00:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.185 (still bad) 2010-Apr-01 00:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.183 (still bad) 2010-Apr-01 00:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.183 (still bad) 2010-Apr-01 00:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.184 (still bad) 2010-Apr-01 00:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.182 (still bad) 2010-Apr-01 00:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.186 (still bad) 2010-Apr-01 00:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.182 (still bad) 2010-Apr-01 00:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.182 (still bad) 2010-Apr-01 00:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.184 (still bad) 2010-Apr-01 00:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.182 (still bad) 2010-Apr-01 00:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.186 (still bad) 2010-Apr-01 00:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.190 (still bad) 2010-Apr-01 00:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.184 (still bad) 2010-Apr-01 00:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.183 (still bad) 2010-Apr-01 00:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.185 (still bad) 2010-Apr-01 00:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.184 (still bad) 2010-Apr-01 00:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.186 (still bad) 2010-Apr-01 00:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.194 (still bad) 2010-Apr-01 00:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.187 (still bad) 2010-Apr-01 00:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.544 and 1.185 (still bad) 2010-Apr-01 00:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.188 (still bad) 2010-Apr-01 00:41:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.495 < 0.75)! 2010-Apr-01 00:41:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.190 1.078 1.056 2010-Apr-01 00:41:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.495 1.153 1.138 0.991 2010-Apr-01 00:41:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.138 0.895 1.167 1.005 2010-Apr-01 00:41:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.911 1.039 1.057 2010-Apr-01 00:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.189 (still bad) 2010-Apr-01 00:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.197 (still bad) 2010-Apr-01 00:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.190 (still bad) 2010-Apr-01 00:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.188 (still bad) 2010-Apr-01 00:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.190 (still bad) 2010-Apr-01 00:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.190 (still bad) 2010-Apr-01 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.193 (still bad) 2010-Apr-01 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.198 (still bad) 2010-Apr-01 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.187 (still bad) 2010-Apr-01 00:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.187 (still bad) 2010-Apr-01 00:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.189 (still bad) 2010-Apr-01 00:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.186 (still bad) 2010-Apr-01 00:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.672 and 1.189 (still bad) 2010-Apr-01 00:42:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.780 and 1.195 2010-Apr-01 00:42:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.639 < 0.75)! 2010-Apr-01 00:42:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.182 1.025 1.003 2010-Apr-01 00:42:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.639 1.152 1.139 0.991 2010-Apr-01 00:42:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.893 1.173 1.008 2010-Apr-01 00:42:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.965 1.098 1.120 2010-Apr-01 00:42:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.775 and 1.185 2010-Apr-01 00:42:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.643 < 0.75)! 2010-Apr-01 00:42:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.183 1.026 1.002 2010-Apr-01 00:42:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.643 1.152 1.139 0.992 2010-Apr-01 00:42:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 0.893 1.168 1.007 2010-Apr-01 00:42:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.919 1.048 1.066 2010-Apr-01 00:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.182 (still bad) 2010-Apr-01 00:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.593 and 1.187 (still bad) 2010-Apr-01 00:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.186 (still bad) 2010-Apr-01 00:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.625 and 1.186 (still bad) 2010-Apr-01 00:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.193 (still bad) 2010-Apr-01 00:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.594 and 1.189 (still bad) 2010-Apr-01 00:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.561 and 1.187 (still bad) 2010-Apr-01 00:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.186 (still bad) 2010-Apr-01 00:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.186 (still bad) 2010-Apr-01 00:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.450 and 1.191 (still bad) 2010-Apr-01 00:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.188 (still bad) 2010-Apr-01 00:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.185 (still bad) 2010-Apr-01 00:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.184 (still bad) 2010-Apr-01 00:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.183 (still bad) 2010-Apr-01 00:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.185 (still bad) 2010-Apr-01 00:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.435 and 1.186 (still bad) 2010-Apr-01 00:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.187 (still bad) 2010-Apr-01 00:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.184 (still bad) 2010-Apr-01 00:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.186 (still bad) 2010-Apr-01 00:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.187 (still bad) 2010-Apr-01 00:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.186 (still bad) 2010-Apr-01 00:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.189 (still bad) 2010-Apr-01 00:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.545 and 1.189 (still bad) 2010-Apr-01 00:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.188 (still bad) 2010-Apr-01 00:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.187 (still bad) 2010-Apr-01 00:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.436 and 1.186 (still bad) 2010-Apr-01 00:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.185 (still bad) 2010-Apr-01 00:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.590 and 1.190 (still bad) 2010-Apr-01 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.190 (still bad) 2010-Apr-01 00:43:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.502 < 0.75)! 2010-Apr-01 00:43:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.191 1.021 0.997 2010-Apr-01 00:43:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.502 1.153 1.140 0.994 2010-Apr-01 00:43:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.136 0.894 1.174 1.007 2010-Apr-01 00:43:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.911 1.040 1.058 2010-Apr-01 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.194 (still bad) 2010-Apr-01 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.198 (still bad) 2010-Apr-01 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.445 and 1.201 (still bad) 2010-Apr-01 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.424 and 1.203 (still bad) 2010-Apr-01 00:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.444 and 1.203 (still bad) 2010-Apr-01 00:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.429 and 1.200 (still bad) 2010-Apr-01 00:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.439 and 1.198 (still bad) 2010-Apr-01 00:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.194 (still bad) 2010-Apr-01 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.187 (still bad) 2010-Apr-01 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.422 and 1.190 (still bad) 2010-Apr-01 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.188 (still bad) 2010-Apr-01 00:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.430 and 1.186 (still bad) 2010-Apr-01 00:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.186 (still bad) 2010-Apr-01 00:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.184 (still bad) 2010-Apr-01 00:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.430 and 1.185 (still bad) 2010-Apr-01 00:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.435 and 1.193 (still bad) 2010-Apr-01 00:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.420 and 1.186 (still bad) 2010-Apr-01 00:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.427 and 1.188 (still bad) 2010-Apr-01 00:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.188 (still bad) 2010-Apr-01 00:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.184 (still bad) 2010-Apr-01 00:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.185 (still bad) 2010-Apr-01 00:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.186 (still bad) 2010-Apr-01 00:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.422 and 1.189 (still bad) 2010-Apr-01 00:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.422 and 1.184 (still bad) 2010-Apr-01 00:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.186 (still bad) 2010-Apr-01 00:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.186 (still bad) 2010-Apr-01 00:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.184 (still bad) 2010-Apr-01 00:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.194 (still bad) 2010-Apr-01 00:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.187 (still bad) 2010-Apr-01 00:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.185 (still bad) 2010-Apr-01 00:44:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.402 < 0.75)! 2010-Apr-01 00:44:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.187 1.023 0.998 2010-Apr-01 00:44:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.402 1.155 1.143 0.995 2010-Apr-01 00:44:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.140 0.897 1.173 1.008 2010-Apr-01 00:44:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.913 1.042 1.060 2010-Apr-01 00:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.185 (still bad) 2010-Apr-01 00:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.187 (still bad) 2010-Apr-01 00:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.195 (still bad) 2010-Apr-01 00:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.187 (still bad) 2010-Apr-01 00:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.185 (still bad) 2010-Apr-01 00:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.189 (still bad) 2010-Apr-01 00:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.185 (still bad) 2010-Apr-01 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.186 (still bad) 2010-Apr-01 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.491 and 1.196 (still bad) 2010-Apr-01 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.184 (still bad) 2010-Apr-01 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.183 (still bad) 2010-Apr-01 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.186 (still bad) 2010-Apr-01 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.185 (still bad) 2010-Apr-01 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.508 and 1.185 (still bad) 2010-Apr-01 00:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.497 and 1.197 (still bad) 2010-Apr-01 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.186 (still bad) 2010-Apr-01 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.184 (still bad) 2010-Apr-01 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.187 (still bad) 2010-Apr-01 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.186 (still bad) 2010-Apr-01 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.505 and 1.185 (still bad) 2010-Apr-01 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.494 and 1.196 (still bad) 2010-Apr-01 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.186 (still bad) 2010-Apr-01 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.184 (still bad) 2010-Apr-01 00:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.186 (still bad) 2010-Apr-01 00:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.187 (still bad) 2010-Apr-01 00:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.190 (still bad) 2010-Apr-01 00:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.500 and 1.202 (still bad) 2010-Apr-01 00:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.499 and 1.195 (still bad) 2010-Apr-01 00:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.197 (still bad) 2010-Apr-01 00:45:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.480 < 0.75)! 2010-Apr-01 00:45:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.202 1.027 0.998 2010-Apr-01 00:45:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.480 1.155 1.143 0.994 2010-Apr-01 00:45:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.140 0.898 1.175 1.008 2010-Apr-01 00:45:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.912 1.044 1.059 2010-Apr-01 00:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.201 (still bad) 2010-Apr-01 00:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.203 (still bad) 2010-Apr-01 00:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.213 (still bad) 2010-Apr-01 00:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.199 (still bad) 2010-Apr-01 00:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.194 (still bad) 2010-Apr-01 00:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.192 (still bad) 2010-Apr-01 00:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.188 (still bad) 2010-Apr-01 00:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.188 (still bad) 2010-Apr-01 00:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.197 (still bad) 2010-Apr-01 00:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.186 (still bad) 2010-Apr-01 00:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.185 (still bad) 2010-Apr-01 00:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.189 (still bad) 2010-Apr-01 00:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.186 (still bad) 2010-Apr-01 00:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.187 (still bad) 2010-Apr-01 00:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.200 (still bad) 2010-Apr-01 00:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.190 (still bad) 2010-Apr-01 00:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.190 (still bad) 2010-Apr-01 00:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.192 (still bad) 2010-Apr-01 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.191 (still bad) 2010-Apr-01 00:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.190 (still bad) 2010-Apr-01 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.190 (still bad) 2010-Apr-01 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.188 (still bad) 2010-Apr-01 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.191 (still bad) 2010-Apr-01 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.185 (still bad) 2010-Apr-01 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.185 (still bad) 2010-Apr-01 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.194 (still bad) 2010-Apr-01 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.186 (still bad) 2010-Apr-01 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.182 (still bad) 2010-Apr-01 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.188 (still bad) 2010-Apr-01 00:46:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.486 < 0.75)! 2010-Apr-01 00:46:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 1.184 1.022 0.997 2010-Apr-01 00:46:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.486 1.154 1.142 0.992 2010-Apr-01 00:46:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.143 0.896 1.181 1.013 2010-Apr-01 00:46:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.909 1.042 1.056 2010-Apr-01 00:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.185 (still bad) 2010-Apr-01 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.196 (still bad) 2010-Apr-01 00:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.187 (still bad) 2010-Apr-01 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.184 (still bad) 2010-Apr-01 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.187 (still bad) 2010-Apr-01 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.186 (still bad) 2010-Apr-01 00:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.185 (still bad) 2010-Apr-01 00:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.195 (still bad) 2010-Apr-01 00:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.186 (still bad) 2010-Apr-01 00:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.186 (still bad) 2010-Apr-01 00:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.188 (still bad) 2010-Apr-01 00:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.186 (still bad) 2010-Apr-01 00:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.189 (still bad) 2010-Apr-01 00:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.197 (still bad) 2010-Apr-01 00:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.188 (still bad) 2010-Apr-01 00:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.185 (still bad) 2010-Apr-01 00:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.189 (still bad) 2010-Apr-01 00:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.186 (still bad) 2010-Apr-01 00:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.187 (still bad) 2010-Apr-01 00:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.196 (still bad) 2010-Apr-01 00:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.188 (still bad) 2010-Apr-01 00:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.186 (still bad) 2010-Apr-01 00:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.189 (still bad) 2010-Apr-01 00:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.183 (still bad) 2010-Apr-01 00:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.188 (still bad) 2010-Apr-01 00:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.198 (still bad) 2010-Apr-01 00:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.191 (still bad) 2010-Apr-01 00:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.187 (still bad) 2010-Apr-01 00:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.188 (still bad) 2010-Apr-01 00:47:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.475 < 0.75)! 2010-Apr-01 00:47:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 1.184 1.023 0.996 2010-Apr-01 00:47:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.475 1.154 1.146 0.993 2010-Apr-01 00:47:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.141 0.897 1.174 1.007 2010-Apr-01 00:47:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.911 1.041 1.059 2010-Apr-01 00:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.187 (still bad) 2010-Apr-01 00:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.195 (still bad) 2010-Apr-01 00:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.188 (still bad) 2010-Apr-01 00:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.184 (still bad) 2010-Apr-01 00:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.188 (still bad) 2010-Apr-01 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.187 (still bad) 2010-Apr-01 00:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.189 (still bad) 2010-Apr-01 00:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.191 (still bad) 2010-Apr-01 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.189 (still bad) 2010-Apr-01 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.188 (still bad) 2010-Apr-01 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.189 (still bad) 2010-Apr-01 00:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.188 (still bad) 2010-Apr-01 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.187 (still bad) 2010-Apr-01 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.188 (still bad) 2010-Apr-01 00:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.189 (still bad) 2010-Apr-01 00:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.186 (still bad) 2010-Apr-01 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.188 (still bad) 2010-Apr-01 00:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.185 (still bad) 2010-Apr-01 00:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.188 (still bad) 2010-Apr-01 00:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.190 (still bad) 2010-Apr-01 00:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.186 (still bad) 2010-Apr-01 00:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.187 (still bad) 2010-Apr-01 00:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.188 (still bad) 2010-Apr-01 00:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.185 (still bad) 2010-Apr-01 00:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.188 (still bad) 2010-Apr-01 00:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.193 (still bad) 2010-Apr-01 00:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.188 (still bad) 2010-Apr-01 00:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.185 (still bad) 2010-Apr-01 00:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.189 (still bad) 2010-Apr-01 00:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.186 (still bad) 2010-Apr-01 00:48:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.466 < 0.75)! 2010-Apr-01 00:48:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.186 1.027 1.002 2010-Apr-01 00:48:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.466 1.157 1.160 1.006 2010-Apr-01 00:48:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.144 0.896 1.175 1.007 2010-Apr-01 00:48:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.916 1.047 1.062 2010-Apr-01 00:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.193 (still bad) 2010-Apr-01 00:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.187 (still bad) 2010-Apr-01 00:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.434 and 1.188 (still bad) 2010-Apr-01 00:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.437 and 1.187 (still bad) 2010-Apr-01 00:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.440 and 1.185 (still bad) 2010-Apr-01 00:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.187 (still bad) 2010-Apr-01 00:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.193 (still bad) 2010-Apr-01 00:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.448 and 1.184 (still bad) 2010-Apr-01 00:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.450 and 1.185 (still bad) 2010-Apr-01 00:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.190 (still bad) 2010-Apr-01 00:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.185 (still bad) 2010-Apr-01 00:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.187 (still bad) 2010-Apr-01 00:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.194 (still bad) 2010-Apr-01 00:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.187 (still bad) 2010-Apr-01 00:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.450 and 1.187 (still bad) 2010-Apr-01 00:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.445 and 1.188 (still bad) 2010-Apr-01 00:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.446 and 1.186 (still bad) 2010-Apr-01 00:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.188 (still bad) 2010-Apr-01 00:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.448 and 1.194 (still bad) 2010-Apr-01 00:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.185 (still bad) 2010-Apr-01 00:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.446 and 1.188 (still bad) 2010-Apr-01 00:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.189 (still bad) 2010-Apr-01 00:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.429 and 1.187 (still bad) 2010-Apr-01 00:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.191 (still bad) 2010-Apr-01 00:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.188 (still bad) 2010-Apr-01 00:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.189 (still bad) 2010-Apr-01 00:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.188 (still bad) 2010-Apr-01 00:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.186 (still bad) 2010-Apr-01 00:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.186 (still bad) 2010-Apr-01 00:49:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.456 < 0.75)! 2010-Apr-01 00:49:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.190 1.029 0.999 2010-Apr-01 00:49:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.456 1.157 1.154 0.999 2010-Apr-01 00:49:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.144 0.896 1.183 1.015 2010-Apr-01 00:49:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.915 1.047 1.062 2010-Apr-01 00:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.189 (still bad) 2010-Apr-01 00:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.188 (still bad) 2010-Apr-01 00:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.188 (still bad) 2010-Apr-01 00:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.187 (still bad) 2010-Apr-01 00:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.188 (still bad) 2010-Apr-01 00:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.449 and 1.190 (still bad) 2010-Apr-01 00:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.439 and 1.189 (still bad) 2010-Apr-01 00:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.446 and 1.187 (still bad) 2010-Apr-01 00:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.187 (still bad) 2010-Apr-01 00:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.188 (still bad) 2010-Apr-01 00:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.185 (still bad) 2010-Apr-01 00:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.188 (still bad) 2010-Apr-01 00:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.446 and 1.189 (still bad) 2010-Apr-01 00:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.187 (still bad) 2010-Apr-01 00:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.438 and 1.188 (still bad) 2010-Apr-01 00:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.186 (still bad) 2010-Apr-01 00:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.451 and 1.187 (still bad) 2010-Apr-01 00:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.190 (still bad) 2010-Apr-01 00:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.191 (still bad) 2010-Apr-01 00:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.455 and 1.185 (still bad) 2010-Apr-01 00:50:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.896 and 1.187 2010-Apr-01 00:50:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:50:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:50:23 LOG5 end_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2010-Apr-01 00:50:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:50:23 LOG5 end_task: Level: (2) ID = <10394> Status = 0 0 0 0 ok 2010-Apr-01 00:50:23 LOG1 fixed_driftmap: New position: year = 2010.2492402147186 RA = 13:27:40.2 RA/Dec = 13:28:12.2 +19:17:15.8 2010-Apr-01 00:50:23 NOTE fixed_driftmap: Correcting ZA to 6:28:17.1 ... 2010-Apr-01 00:50:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4714220610 -CF 2010-Apr-01 00:50:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 00:50:23 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 00:50:23 LOG5 begin_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2010-Apr-01 00:50:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 00:50:23 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 00:50:23 LOG5 begin_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2010-Apr-01 00:50:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 00:50:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 00:50:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:50:23 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 00:50:23 LOG5 begin_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2010-Apr-01 00:50:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4714220610 -CF 2010-Apr-01 00:50:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:50:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 00:50:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 00:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:50:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 00:50:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 00:50:24 LOG5 end_task: Level: (4) ID = <10398> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 00:50:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:50:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 00:50:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:50:24 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 00:50:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:50:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:50:24 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:50:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 00:50:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 00:50:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:50:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 00:50:24 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 00:50:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 00:50:24 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 00:50:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 00:50:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 00:50:24 LOG5 end_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 00:50:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 00:50:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 00:50:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:50:24 LOG5 begin_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:50:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 00:50:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:50:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:50:24 LOG5 end_task: Level: (3) ID = <10401> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 00:50:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:50:24 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-Apr-01 00:50:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 00:50:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:50:24 INFO2 take_data: Starting WAPP 1-second scan: 9100010 2010-Apr-01 00:50:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:50:25 LOG5 begin_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-Apr-01 00:50:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:50:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 00:50:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17426.00 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 00:50:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 00:50:27 LOG5 end_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 00:50:27 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 00:50:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 00:50:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 00:50:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 00:50:27 LOG5 begin_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 00:50:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 00:50:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 00:50:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 00:50:27 LOG5 end_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 00:50:27 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 00:50:27 LOG5 finish_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 00:50:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 00:50:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 00:50:27 LOG5 end_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2010-Apr-01 00:50:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2010-Apr-01 00:50:27 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2010-Apr-01 00:50:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:50:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:50:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:50:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 00:50:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 00:50:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 00:50:28 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 00:50:28 LOG5 begin_task: Level: (2) ID = <10405> Status = 0 0 0 0 ok 2010-Apr-01 00:50:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 00:50:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 00:50:28 INFO2 take_data: Starting WAPP 600-second scan: 9100011 2010-Apr-01 00:50:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 00:50:28 LOG5 begin_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2010-Apr-01 00:50:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 00:50:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 00:50:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 00:50:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17429.00 2010-Apr-01 00:50:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0005.fits 2010-Apr-01 00:50:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0005.fits} 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:50:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 00:52:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.712 < 0.75)! 2010-Apr-01 00:52:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.951 1.192 1.033 1.002 2010-Apr-01 00:52:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.712 1.159 1.155 0.998 2010-Apr-01 00:52:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.148 0.899 1.182 1.010 2010-Apr-01 00:52:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.918 1.051 1.066 2010-Apr-01 00:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.696 and 1.190 (still bad) 2010-Apr-01 00:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.190 (still bad) 2010-Apr-01 00:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.675 and 1.190 (still bad) 2010-Apr-01 00:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.703 and 1.189 (still bad) 2010-Apr-01 00:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.674 and 1.191 (still bad) 2010-Apr-01 00:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.190 (still bad) 2010-Apr-01 00:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.658 and 1.187 (still bad) 2010-Apr-01 00:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.659 and 1.189 (still bad) 2010-Apr-01 00:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.651 and 1.189 (still bad) 2010-Apr-01 00:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.665 and 1.188 (still bad) 2010-Apr-01 00:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.650 and 1.192 (still bad) 2010-Apr-01 00:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.189 (still bad) 2010-Apr-01 00:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.655 and 1.188 (still bad) 2010-Apr-01 00:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.656 and 1.190 (still bad) 2010-Apr-01 00:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.649 and 1.186 (still bad) 2010-Apr-01 00:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.636 and 1.189 (still bad) 2010-Apr-01 00:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.627 and 1.197 (still bad) 2010-Apr-01 00:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.646 and 1.187 (still bad) 2010-Apr-01 00:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.634 and 1.188 (still bad) 2010-Apr-01 00:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.614 and 1.190 (still bad) 2010-Apr-01 00:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.186 (still bad) 2010-Apr-01 00:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.192 (still bad) 2010-Apr-01 00:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.197 (still bad) 2010-Apr-01 00:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.555 and 1.189 (still bad) 2010-Apr-01 00:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.542 and 1.189 (still bad) 2010-Apr-01 00:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.193 (still bad) 2010-Apr-01 00:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.484 and 1.188 (still bad) 2010-Apr-01 00:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.439 and 1.191 (still bad) 2010-Apr-01 00:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.196 (still bad) 2010-Apr-01 00:53:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.429 < 0.75)! 2010-Apr-01 00:53:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.188 1.032 1.001 2010-Apr-01 00:53:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.429 1.159 1.153 0.998 2010-Apr-01 00:53:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.177 0.924 1.179 1.010 2010-Apr-01 00:53:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.917 1.052 1.065 2010-Apr-01 00:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.623 and 1.189 (still bad) 2010-Apr-01 00:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.190 (still bad) 2010-Apr-01 00:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.633 and 1.186 (still bad) 2010-Apr-01 00:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.601 and 1.190 (still bad) 2010-Apr-01 00:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.570 and 1.198 (still bad) 2010-Apr-01 00:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.599 and 1.191 (still bad) 2010-Apr-01 00:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.609 and 1.190 (still bad) 2010-Apr-01 00:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.569 and 1.192 (still bad) 2010-Apr-01 00:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.628 and 1.187 (still bad) 2010-Apr-01 00:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.591 and 1.190 (still bad) 2010-Apr-01 00:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.506 and 1.195 (still bad) 2010-Apr-01 00:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.186 (still bad) 2010-Apr-01 00:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.186 (still bad) 2010-Apr-01 00:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.188 (still bad) 2010-Apr-01 00:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.186 (still bad) 2010-Apr-01 00:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.490 and 1.187 (still bad) 2010-Apr-01 00:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.493 and 1.195 (still bad) 2010-Apr-01 00:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.189 (still bad) 2010-Apr-01 00:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.188 (still bad) 2010-Apr-01 00:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.191 (still bad) 2010-Apr-01 00:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.187 (still bad) 2010-Apr-01 00:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.188 (still bad) 2010-Apr-01 00:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.194 (still bad) 2010-Apr-01 00:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.458 and 1.188 (still bad) 2010-Apr-01 00:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.186 (still bad) 2010-Apr-01 00:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.189 (still bad) 2010-Apr-01 00:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.186 (still bad) 2010-Apr-01 00:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.450 and 1.189 (still bad) 2010-Apr-01 00:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.197 (still bad) 2010-Apr-01 00:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.185 (still bad) 2010-Apr-01 00:54:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.444 < 0.75)! 2010-Apr-01 00:54:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.950 1.187 1.034 1.000 2010-Apr-01 00:54:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.444 1.156 1.153 0.994 2010-Apr-01 00:54:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.152 0.897 1.184 1.010 2010-Apr-01 00:54:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.916 1.054 1.064 2010-Apr-01 00:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.437 and 1.190 (still bad) 2010-Apr-01 00:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.435 and 1.186 (still bad) 2010-Apr-01 00:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.440 and 1.188 (still bad) 2010-Apr-01 00:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.436 and 1.188 (still bad) 2010-Apr-01 00:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.356 and 1.187 (still bad) 2010-Apr-01 00:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.351 and 1.185 (still bad) 2010-Apr-01 00:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.186 (still bad) 2010-Apr-01 00:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.351 and 1.187 (still bad) 2010-Apr-01 00:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.353 and 1.196 (still bad) 2010-Apr-01 00:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.357 and 1.188 (still bad) 2010-Apr-01 00:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.186 (still bad) 2010-Apr-01 00:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.356 and 1.188 (still bad) 2010-Apr-01 00:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.358 and 1.186 (still bad) 2010-Apr-01 00:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.359 and 1.189 (still bad) 2010-Apr-01 00:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.359 and 1.196 (still bad) 2010-Apr-01 00:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.351 and 1.185 (still bad) 2010-Apr-01 00:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.353 and 1.185 (still bad) 2010-Apr-01 00:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.355 and 1.189 (still bad) 2010-Apr-01 00:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.187 (still bad) 2010-Apr-01 00:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.188 (still bad) 2010-Apr-01 00:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.197 (still bad) 2010-Apr-01 00:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.188 (still bad) 2010-Apr-01 00:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.346 and 1.185 (still bad) 2010-Apr-01 00:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.341 and 1.190 (still bad) 2010-Apr-01 00:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.188 (still bad) 2010-Apr-01 00:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.191 (still bad) 2010-Apr-01 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.342 and 1.198 (still bad) 2010-Apr-01 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.194 (still bad) 2010-Apr-01 00:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.339 and 1.194 (still bad) 2010-Apr-01 00:55:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.337 < 0.75)! 2010-Apr-01 00:55:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.199 1.036 1.001 2010-Apr-01 00:55:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.337 1.174 1.159 0.998 2010-Apr-01 00:55:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.155 0.899 1.188 1.010 2010-Apr-01 00:55:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.917 1.055 1.065 2010-Apr-01 00:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.345 and 1.192 (still bad) 2010-Apr-01 00:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.196 (still bad) 2010-Apr-01 00:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.341 and 1.200 (still bad) 2010-Apr-01 00:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.195 (still bad) 2010-Apr-01 00:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.190 (still bad) 2010-Apr-01 00:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.190 (still bad) 2010-Apr-01 00:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.339 and 1.190 (still bad) 2010-Apr-01 00:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.350 and 1.191 (still bad) 2010-Apr-01 00:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.203 (still bad) 2010-Apr-01 00:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.336 and 1.198 (still bad) 2010-Apr-01 00:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.205 (still bad) 2010-Apr-01 00:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.217 (still bad) 2010-Apr-01 00:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.224 (still bad) 2010-Apr-01 00:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.335 and 1.234 (still bad) 2010-Apr-01 00:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.249 (still bad) 2010-Apr-01 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.238 (still bad) 2010-Apr-01 00:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.232 (still bad) 2010-Apr-01 00:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.336 and 1.226 (still bad) 2010-Apr-01 00:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.213 (still bad) 2010-Apr-01 00:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.341 and 1.207 (still bad) 2010-Apr-01 00:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.335 and 1.205 (still bad) 2010-Apr-01 00:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.190 (still bad) 2010-Apr-01 00:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.192 (still bad) 2010-Apr-01 00:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.195 (still bad) 2010-Apr-01 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.197 (still bad) 2010-Apr-01 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.200 (still bad) 2010-Apr-01 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.326 and 1.211 (still bad) 2010-Apr-01 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.202 (still bad) 2010-Apr-01 00:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.200 (still bad) 2010-Apr-01 00:56:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.320 < 0.75)! 2010-Apr-01 00:56:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.191 1.036 1.000 2010-Apr-01 00:56:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.320 1.157 1.157 0.995 2010-Apr-01 00:56:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.158 0.898 1.202 1.020 2010-Apr-01 00:56:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.917 1.055 1.064 2010-Apr-01 00:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.317 and 1.195 (still bad) 2010-Apr-01 00:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.319 and 1.192 (still bad) 2010-Apr-01 00:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.196 (still bad) 2010-Apr-01 00:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.188 (still bad) 2010-Apr-01 00:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.330 and 1.190 (still bad) 2010-Apr-01 00:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.327 and 1.190 (still bad) 2010-Apr-01 00:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.335 and 1.190 (still bad) 2010-Apr-01 00:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.326 and 1.191 (still bad) 2010-Apr-01 00:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.198 (still bad) 2010-Apr-01 00:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.190 (still bad) 2010-Apr-01 00:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.330 and 1.191 (still bad) 2010-Apr-01 00:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.192 (still bad) 2010-Apr-01 00:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.190 (still bad) 2010-Apr-01 00:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.191 (still bad) 2010-Apr-01 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.198 (still bad) 2010-Apr-01 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.188 (still bad) 2010-Apr-01 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.189 (still bad) 2010-Apr-01 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.190 (still bad) 2010-Apr-01 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.187 (still bad) 2010-Apr-01 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.189 (still bad) 2010-Apr-01 00:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.196 (still bad) 2010-Apr-01 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.189 (still bad) 2010-Apr-01 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.190 (still bad) 2010-Apr-01 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.190 (still bad) 2010-Apr-01 00:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.189 (still bad) 2010-Apr-01 00:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.189 (still bad) 2010-Apr-01 00:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.193 (still bad) 2010-Apr-01 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.189 (still bad) 2010-Apr-01 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.189 (still bad) 2010-Apr-01 00:57:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.420 < 0.75)! 2010-Apr-01 00:57:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.188 1.036 1.003 2010-Apr-01 00:57:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.420 1.159 1.155 0.997 2010-Apr-01 00:57:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.155 0.896 1.185 1.008 2010-Apr-01 00:57:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.917 1.054 1.064 2010-Apr-01 00:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.191 (still bad) 2010-Apr-01 00:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.194 (still bad) 2010-Apr-01 00:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.191 (still bad) 2010-Apr-01 00:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.420 and 1.190 (still bad) 2010-Apr-01 00:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.192 (still bad) 2010-Apr-01 00:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.192 (still bad) 2010-Apr-01 00:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.192 (still bad) 2010-Apr-01 00:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.196 (still bad) 2010-Apr-01 00:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.192 (still bad) 2010-Apr-01 00:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.189 (still bad) 2010-Apr-01 00:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.192 (still bad) 2010-Apr-01 00:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.189 (still bad) 2010-Apr-01 00:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.190 (still bad) 2010-Apr-01 00:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.197 (still bad) 2010-Apr-01 00:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.188 (still bad) 2010-Apr-01 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.188 (still bad) 2010-Apr-01 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.191 (still bad) 2010-Apr-01 00:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.188 (still bad) 2010-Apr-01 00:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.189 (still bad) 2010-Apr-01 00:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.200 (still bad) 2010-Apr-01 00:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.191 (still bad) 2010-Apr-01 00:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.189 (still bad) 2010-Apr-01 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.193 (still bad) 2010-Apr-01 00:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.191 (still bad) 2010-Apr-01 00:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.192 (still bad) 2010-Apr-01 00:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.422 and 1.199 (still bad) 2010-Apr-01 00:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.191 (still bad) 2010-Apr-01 00:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.190 (still bad) 2010-Apr-01 00:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.193 (still bad) 2010-Apr-01 00:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.189 (still bad) 2010-Apr-01 00:58:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.419 < 0.75)! 2010-Apr-01 00:58:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.191 1.037 1.004 2010-Apr-01 00:58:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.419 1.161 1.161 0.999 2010-Apr-01 00:58:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.159 0.899 1.189 1.010 2010-Apr-01 00:58:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.917 1.057 1.065 2010-Apr-01 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.196 (still bad) 2010-Apr-01 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.189 (still bad) 2010-Apr-01 00:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.190 (still bad) 2010-Apr-01 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.191 (still bad) 2010-Apr-01 00:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.188 (still bad) 2010-Apr-01 00:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.189 (still bad) 2010-Apr-01 00:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.199 (still bad) 2010-Apr-01 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.190 (still bad) 2010-Apr-01 00:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.188 (still bad) 2010-Apr-01 00:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.193 (still bad) 2010-Apr-01 00:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.190 (still bad) 2010-Apr-01 00:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.191 (still bad) 2010-Apr-01 00:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.197 (still bad) 2010-Apr-01 00:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.190 (still bad) 2010-Apr-01 00:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.188 (still bad) 2010-Apr-01 00:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.191 (still bad) 2010-Apr-01 00:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.188 (still bad) 2010-Apr-01 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.191 (still bad) 2010-Apr-01 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.197 (still bad) 2010-Apr-01 00:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.190 (still bad) 2010-Apr-01 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.192 (still bad) 2010-Apr-01 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.197 (still bad) 2010-Apr-01 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.194 (still bad) 2010-Apr-01 00:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.193 (still bad) 2010-Apr-01 00:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.200 (still bad) 2010-Apr-01 00:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.190 (still bad) 2010-Apr-01 00:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.193 (still bad) 2010-Apr-01 00:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.192 (still bad) 2010-Apr-01 00:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.191 (still bad) 2010-Apr-01 00:59:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.417 < 0.75)! 2010-Apr-01 00:59:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.192 1.037 1.003 2010-Apr-01 00:59:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.417 1.160 1.159 0.999 2010-Apr-01 00:59:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.158 0.899 1.197 1.017 2010-Apr-01 00:59:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.916 1.057 1.062 2010-Apr-01 00:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.200 (still bad) 2010-Apr-01 00:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.202 (still bad) 2010-Apr-01 00:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.205 (still bad) 2010-Apr-01 00:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.208 (still bad) 2010-Apr-01 00:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.208 (still bad) 2010-Apr-01 00:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.208 (still bad) 2010-Apr-01 00:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.206 (still bad) 2010-Apr-01 00:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.203 (still bad) 2010-Apr-01 00:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.492 and 1.198 (still bad) 2010-Apr-01 00:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.193 (still bad) 2010-Apr-01 00:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.192 (still bad) 2010-Apr-01 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.192 (still bad) 2010-Apr-01 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.192 (still bad) 2010-Apr-01 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.190 (still bad) 2010-Apr-01 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.191 (still bad) 2010-Apr-01 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.188 (still bad) 2010-Apr-01 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.189 (still bad) 2010-Apr-01 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.189 (still bad) 2010-Apr-01 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.189 (still bad) 2010-Apr-01 00:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.188 (still bad) 2010-Apr-01 01:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.359 and 1.189 (still bad) 2010-Apr-01 01:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.344 and 1.187 (still bad) 2010-Apr-01 01:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.420 and 1.188 (still bad) 2010-Apr-01 01:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.190 (still bad) 2010-Apr-01 01:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.192 (still bad) 2010-Apr-01 01:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.188 (still bad) 2010-Apr-01 01:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.190 (still bad) 2010-Apr-01 01:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.342 and 1.189 (still bad) 2010-Apr-01 01:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.190 (still bad) 2010-Apr-01 01:00:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.388 < 0.75)! 2010-Apr-01 01:00:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.193 1.045 1.012 2010-Apr-01 01:00:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.388 1.162 1.162 1.002 2010-Apr-01 01:00:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.167 0.906 1.186 1.010 2010-Apr-01 01:00:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.916 1.056 1.063 2010-Apr-01 01:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.191 (still bad) 2010-Apr-01 01:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.501 and 1.191 (still bad) 2010-Apr-01 01:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.348 and 1.189 (still bad) 2010-Apr-01 01:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.192 (still bad) 2010-Apr-01 01:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.194 (still bad) 2010-Apr-01 01:00:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:00:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:00:29 LOG5 end_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:00:29 LOG5 end_task: Level: (2) ID = <10405> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 LOG1 fixed_driftmap: New position: year = 2010.2492594176997 RA = 13:37:49.7 RA/Dec = 13:38:21.5 +19:17:19.2 2010-Apr-01 01:00:29 NOTE fixed_driftmap: Correcting ZA to 6:28:43.5 ... 2010-Apr-01 01:00:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4787472496 -CF 2010-Apr-01 01:00:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:00:29 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:00:29 LOG5 begin_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:00:29 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:00:29 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:00:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:00:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:00:29 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:00:29 LOG5 begin_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4787472496 -CF 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:00:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:00:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:00:29 LOG5 end_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2010-Apr-01 01:00:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:00:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:00:30 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:00:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:00:30 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:00:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:00:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:00:30 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:00:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:00:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:00:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:00:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:00:30 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:00:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:00:30 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:00:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:00:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:00:30 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:00:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:00:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:00:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:00:30 LOG5 begin_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:00:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:00:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:00:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:00:30 LOG5 end_task: Level: (3) ID = <10412> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:00:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:00:30 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-Apr-01 01:00:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:00:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:00:30 INFO2 take_data: Starting WAPP 1-second scan: 9100012 2010-Apr-01 01:00:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:00:31 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-Apr-01 01:00:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.195 (still bad) 2010-Apr-01 01:00:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:00:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18032.00 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.617 (still bad) 2010-Apr-01 01:00:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:00:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:00:33 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:00:33 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:00:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:00:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:00:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:00:33 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:00:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:00:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:00:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:00:33 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:00:33 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:00:33 LOG5 finish_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:00:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:00:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:00:33 LOG5 end_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2010-Apr-01 01:00:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2010-Apr-01 01:00:34 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2010-Apr-01 01:00:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:00:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:00:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:00:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:00:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:00:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:00:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:00:34 LOG5 begin_task: Level: (2) ID = <10416> Status = 0 0 0 0 ok 2010-Apr-01 01:00:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:00:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:00:34 INFO2 take_data: Starting WAPP 600-second scan: 9100013 2010-Apr-01 01:00:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:00:34 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2010-Apr-01 01:00:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:00:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:00:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:00:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18035.00 2010-Apr-01 01:00:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0006.fits 2010-Apr-01 01:00:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0006.fits} 2010-Apr-01 01:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.634 (still bad) 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.193 (still bad) 2010-Apr-01 01:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.191 (still bad) 2010-Apr-01 01:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.357 and 1.191 (still bad) 2010-Apr-01 01:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.197 (still bad) 2010-Apr-01 01:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.324 and 1.195 (still bad) 2010-Apr-01 01:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.197 (still bad) 2010-Apr-01 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.199 (still bad) 2010-Apr-01 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.200 (still bad) 2010-Apr-01 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.320 and 1.203 (still bad) 2010-Apr-01 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.523 and 1.205 (still bad) 2010-Apr-01 01:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.201 (still bad) 2010-Apr-01 01:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.201 (still bad) 2010-Apr-01 01:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.197 (still bad) 2010-Apr-01 01:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.195 (still bad) 2010-Apr-01 01:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.193 (still bad) 2010-Apr-01 01:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.195 (still bad) 2010-Apr-01 01:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.326 and 1.191 (still bad) 2010-Apr-01 01:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.320 and 1.191 (still bad) 2010-Apr-01 01:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.191 (still bad) 2010-Apr-01 01:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.191 (still bad) 2010-Apr-01 01:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.319 and 1.192 (still bad) 2010-Apr-01 01:01:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.318 < 0.75)! 2010-Apr-01 01:01:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 1.188 1.037 1.005 2010-Apr-01 01:01:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.318 1.163 1.158 0.998 2010-Apr-01 01:01:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.160 0.901 1.193 1.012 2010-Apr-01 01:01:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.919 1.058 1.066 2010-Apr-01 01:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.318 and 1.191 (still bad) 2010-Apr-01 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.318 and 1.191 (still bad) 2010-Apr-01 01:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.188 (still bad) 2010-Apr-01 01:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.319 and 1.189 (still bad) 2010-Apr-01 01:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.191 (still bad) 2010-Apr-01 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.190 (still bad) 2010-Apr-01 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.309 and 1.190 (still bad) 2010-Apr-01 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.190 (still bad) 2010-Apr-01 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.190 (still bad) 2010-Apr-01 01:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.187 (still bad) 2010-Apr-01 01:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.190 (still bad) 2010-Apr-01 01:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.188 (still bad) 2010-Apr-01 01:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.349 and 1.189 (still bad) 2010-Apr-01 01:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.189 (still bad) 2010-Apr-01 01:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.190 (still bad) 2010-Apr-01 01:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.191 (still bad) 2010-Apr-01 01:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.191 (still bad) 2010-Apr-01 01:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.190 (still bad) 2010-Apr-01 01:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.191 (still bad) 2010-Apr-01 01:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.188 (still bad) 2010-Apr-01 01:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.191 (still bad) 2010-Apr-01 01:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.189 (still bad) 2010-Apr-01 01:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.188 (still bad) 2010-Apr-01 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.192 (still bad) 2010-Apr-01 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.190 (still bad) 2010-Apr-01 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.306 and 1.192 (still bad) 2010-Apr-01 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.265 and 1.190 (still bad) 2010-Apr-01 01:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.294 and 1.189 (still bad) 2010-Apr-01 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.293 and 1.196 (still bad) 2010-Apr-01 01:02:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.297 < 0.75)! 2010-Apr-01 01:02:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.190 1.038 1.006 2010-Apr-01 01:02:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.297 1.159 1.159 0.997 2010-Apr-01 01:02:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.157 0.898 1.189 1.011 2010-Apr-01 01:02:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.917 1.059 1.065 2010-Apr-01 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.296 and 1.189 (still bad) 2010-Apr-01 01:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.190 (still bad) 2010-Apr-01 01:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.191 (still bad) 2010-Apr-01 01:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.191 (still bad) 2010-Apr-01 01:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.305 and 1.195 (still bad) 2010-Apr-01 01:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.307 and 1.192 (still bad) 2010-Apr-01 01:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.188 (still bad) 2010-Apr-01 01:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.191 (still bad) 2010-Apr-01 01:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.191 (still bad) 2010-Apr-01 01:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.190 (still bad) 2010-Apr-01 01:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.197 (still bad) 2010-Apr-01 01:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.303 and 1.192 (still bad) 2010-Apr-01 01:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.190 (still bad) 2010-Apr-01 01:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.306 and 1.192 (still bad) 2010-Apr-01 01:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.305 and 1.190 (still bad) 2010-Apr-01 01:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.194 (still bad) 2010-Apr-01 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.199 (still bad) 2010-Apr-01 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.309 and 1.193 (still bad) 2010-Apr-01 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.191 (still bad) 2010-Apr-01 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.307 and 1.195 (still bad) 2010-Apr-01 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.307 and 1.193 (still bad) 2010-Apr-01 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.352 and 1.193 (still bad) 2010-Apr-01 01:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.324 and 1.199 (still bad) 2010-Apr-01 01:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.301 and 1.193 (still bad) 2010-Apr-01 01:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.299 and 1.192 (still bad) 2010-Apr-01 01:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.299 and 1.195 (still bad) 2010-Apr-01 01:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.298 and 1.190 (still bad) 2010-Apr-01 01:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.297 and 1.193 (still bad) 2010-Apr-01 01:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.290 and 1.198 (still bad) 2010-Apr-01 01:03:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.290 < 0.75)! 2010-Apr-01 01:03:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.192 1.040 1.005 2010-Apr-01 01:03:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.290 1.160 1.161 0.997 2010-Apr-01 01:03:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.159 0.900 1.192 1.010 2010-Apr-01 01:03:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.920 1.057 1.068 2010-Apr-01 01:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.299 and 1.190 (still bad) 2010-Apr-01 01:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.193 (still bad) 2010-Apr-01 01:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.303 and 1.191 (still bad) 2010-Apr-01 01:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.296 and 1.192 (still bad) 2010-Apr-01 01:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.199 (still bad) 2010-Apr-01 01:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.193 (still bad) 2010-Apr-01 01:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.300 and 1.191 (still bad) 2010-Apr-01 01:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.304 and 1.196 (still bad) 2010-Apr-01 01:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.308 and 1.192 (still bad) 2010-Apr-01 01:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.317 and 1.192 (still bad) 2010-Apr-01 01:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.196 (still bad) 2010-Apr-01 01:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.195 (still bad) 2010-Apr-01 01:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.193 (still bad) 2010-Apr-01 01:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.195 (still bad) 2010-Apr-01 01:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.307 and 1.192 (still bad) 2010-Apr-01 01:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.304 and 1.194 (still bad) 2010-Apr-01 01:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.198 (still bad) 2010-Apr-01 01:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.193 (still bad) 2010-Apr-01 01:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.194 (still bad) 2010-Apr-01 01:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.195 (still bad) 2010-Apr-01 01:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.193 (still bad) 2010-Apr-01 01:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.196 (still bad) 2010-Apr-01 01:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.326 and 1.203 (still bad) 2010-Apr-01 01:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.196 (still bad) 2010-Apr-01 01:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.193 (still bad) 2010-Apr-01 01:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.324 and 1.196 (still bad) 2010-Apr-01 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.194 (still bad) 2010-Apr-01 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.320 and 1.195 (still bad) 2010-Apr-01 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.200 (still bad) 2010-Apr-01 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.303 and 1.193 (still bad) 2010-Apr-01 01:04:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.320 < 0.75)! 2010-Apr-01 01:04:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.189 1.036 1.004 2010-Apr-01 01:04:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.320 1.159 1.163 0.996 2010-Apr-01 01:04:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.161 0.899 1.192 1.012 2010-Apr-01 01:04:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.920 1.061 1.067 2010-Apr-01 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.195 (still bad) 2010-Apr-01 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.193 (still bad) 2010-Apr-01 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.326 and 1.198 (still bad) 2010-Apr-01 01:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.201 (still bad) 2010-Apr-01 01:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.338 and 1.193 (still bad) 2010-Apr-01 01:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.194 (still bad) 2010-Apr-01 01:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.336 and 1.196 (still bad) 2010-Apr-01 01:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.335 and 1.194 (still bad) 2010-Apr-01 01:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.335 and 1.195 (still bad) 2010-Apr-01 01:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.339 and 1.202 (still bad) 2010-Apr-01 01:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.196 (still bad) 2010-Apr-01 01:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.193 (still bad) 2010-Apr-01 01:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.199 (still bad) 2010-Apr-01 01:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.327 and 1.193 (still bad) 2010-Apr-01 01:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.195 (still bad) 2010-Apr-01 01:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.201 (still bad) 2010-Apr-01 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.197 (still bad) 2010-Apr-01 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.194 (still bad) 2010-Apr-01 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.199 (still bad) 2010-Apr-01 01:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.196 (still bad) 2010-Apr-01 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.196 (still bad) 2010-Apr-01 01:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.336 and 1.203 (still bad) 2010-Apr-01 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.196 (still bad) 2010-Apr-01 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.195 (still bad) 2010-Apr-01 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.198 (still bad) 2010-Apr-01 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.195 (still bad) 2010-Apr-01 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.196 (still bad) 2010-Apr-01 01:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.202 (still bad) 2010-Apr-01 01:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.197 (still bad) 2010-Apr-01 01:05:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.330 < 0.75)! 2010-Apr-01 01:05:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.192 1.041 1.007 2010-Apr-01 01:05:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.330 1.160 1.168 1.002 2010-Apr-01 01:05:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.164 0.900 1.194 1.013 2010-Apr-01 01:05:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.918 1.060 1.066 2010-Apr-01 01:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.330 and 1.199 (still bad) 2010-Apr-01 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.334 and 1.193 (still bad) 2010-Apr-01 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.332 and 1.198 (still bad) 2010-Apr-01 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.202 (still bad) 2010-Apr-01 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.195 (still bad) 2010-Apr-01 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.327 and 1.194 (still bad) 2010-Apr-01 01:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.196 (still bad) 2010-Apr-01 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.194 (still bad) 2010-Apr-01 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.194 (still bad) 2010-Apr-01 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.199 (still bad) 2010-Apr-01 01:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.329 and 1.197 (still bad) 2010-Apr-01 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.195 (still bad) 2010-Apr-01 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.331 and 1.192 (still bad) 2010-Apr-01 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.194 (still bad) 2010-Apr-01 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.195 (still bad) 2010-Apr-01 01:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.155 and 1.197 (still bad) 2010-Apr-01 01:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.131 and 1.177 (still bad) 2010-Apr-01 01:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.175 and 1.174 (still bad) 2010-Apr-01 01:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.166 (still bad) 2010-Apr-01 01:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.197 (still bad) 2010-Apr-01 01:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.328 and 1.190 (still bad) 2010-Apr-01 01:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.191 (still bad) 2010-Apr-01 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.196 (still bad) 2010-Apr-01 01:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.200 (still bad) 2010-Apr-01 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.196 (still bad) 2010-Apr-01 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.198 (still bad) 2010-Apr-01 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.203 (still bad) 2010-Apr-01 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.323 and 1.197 (still bad) 2010-Apr-01 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.320 and 1.198 (still bad) 2010-Apr-01 01:06:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.310 < 0.75)! 2010-Apr-01 01:06:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.197 1.040 1.004 2010-Apr-01 01:06:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.310 1.161 1.166 1.001 2010-Apr-01 01:06:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.902 1.199 1.015 2010-Apr-01 01:06:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.919 1.062 1.067 2010-Apr-01 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.196 (still bad) 2010-Apr-01 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.197 (still bad) 2010-Apr-01 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.204 (still bad) 2010-Apr-01 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.198 (still bad) 2010-Apr-01 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.194 (still bad) 2010-Apr-01 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.199 (still bad) 2010-Apr-01 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.337 and 1.194 (still bad) 2010-Apr-01 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.197 (still bad) 2010-Apr-01 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.319 and 1.203 (still bad) 2010-Apr-01 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.317 and 1.199 (still bad) 2010-Apr-01 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.196 (still bad) 2010-Apr-01 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.200 (still bad) 2010-Apr-01 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.197 (still bad) 2010-Apr-01 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.197 (still bad) 2010-Apr-01 01:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.204 (still bad) 2010-Apr-01 01:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.200 (still bad) 2010-Apr-01 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.196 (still bad) 2010-Apr-01 01:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.199 (still bad) 2010-Apr-01 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.195 (still bad) 2010-Apr-01 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.197 (still bad) 2010-Apr-01 01:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.204 (still bad) 2010-Apr-01 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.319 and 1.201 (still bad) 2010-Apr-01 01:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.196 (still bad) 2010-Apr-01 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.200 (still bad) 2010-Apr-01 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.317 and 1.197 (still bad) 2010-Apr-01 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.316 and 1.198 (still bad) 2010-Apr-01 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.205 (still bad) 2010-Apr-01 01:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.196 (still bad) 2010-Apr-01 01:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.195 (still bad) 2010-Apr-01 01:07:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.315 < 0.75)! 2010-Apr-01 01:07:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.197 1.042 1.006 2010-Apr-01 01:07:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.315 1.164 1.166 1.001 2010-Apr-01 01:07:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.902 1.196 1.013 2010-Apr-01 01:07:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.920 1.062 1.067 2010-Apr-01 01:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.195 (still bad) 2010-Apr-01 01:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.198 (still bad) 2010-Apr-01 01:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.204 (still bad) 2010-Apr-01 01:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.197 (still bad) 2010-Apr-01 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.197 (still bad) 2010-Apr-01 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.308 and 1.198 (still bad) 2010-Apr-01 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.197 (still bad) 2010-Apr-01 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.200 (still bad) 2010-Apr-01 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.199 (still bad) 2010-Apr-01 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.198 (still bad) 2010-Apr-01 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.321 and 1.200 (still bad) 2010-Apr-01 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.199 (still bad) 2010-Apr-01 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.198 (still bad) 2010-Apr-01 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.199 (still bad) 2010-Apr-01 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.306 and 1.199 (still bad) 2010-Apr-01 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.307 and 1.199 (still bad) 2010-Apr-01 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.308 and 1.200 (still bad) 2010-Apr-01 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.315 and 1.200 (still bad) 2010-Apr-01 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.199 (still bad) 2010-Apr-01 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.200 (still bad) 2010-Apr-01 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.198 (still bad) 2010-Apr-01 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.195 (still bad) 2010-Apr-01 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.313 and 1.198 (still bad) 2010-Apr-01 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.197 (still bad) 2010-Apr-01 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.311 and 1.197 (still bad) 2010-Apr-01 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.314 and 1.197 (still bad) 2010-Apr-01 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.197 (still bad) 2010-Apr-01 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.197 (still bad) 2010-Apr-01 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.310 and 1.198 (still bad) 2010-Apr-01 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.312 and 1.195 (still bad) 2010-Apr-01 01:08:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.317 < 0.75)! 2010-Apr-01 01:08:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.196 1.039 1.005 2010-Apr-01 01:08:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.317 1.163 1.164 0.999 2010-Apr-01 01:08:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.162 0.902 1.195 1.011 2010-Apr-01 01:08:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.920 1.062 1.067 2010-Apr-01 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.327 and 1.198 (still bad) 2010-Apr-01 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.318 and 1.198 (still bad) 2010-Apr-01 01:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.330 and 1.197 (still bad) 2010-Apr-01 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.197 (still bad) 2010-Apr-01 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.199 (still bad) 2010-Apr-01 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.195 (still bad) 2010-Apr-01 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.199 (still bad) 2010-Apr-01 01:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.198 (still bad) 2010-Apr-01 01:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.361 and 1.196 (still bad) 2010-Apr-01 01:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.195 (still bad) 2010-Apr-01 01:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.358 and 1.196 (still bad) 2010-Apr-01 01:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.196 (still bad) 2010-Apr-01 01:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.202 (still bad) 2010-Apr-01 01:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.359 and 1.199 (still bad) 2010-Apr-01 01:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.198 (still bad) 2010-Apr-01 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.199 (still bad) 2010-Apr-01 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.197 (still bad) 2010-Apr-01 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.197 (still bad) 2010-Apr-01 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.203 (still bad) 2010-Apr-01 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.426 and 1.198 (still bad) 2010-Apr-01 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.462 and 1.197 (still bad) 2010-Apr-01 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.197 (still bad) 2010-Apr-01 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.467 and 1.199 (still bad) 2010-Apr-01 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.198 (still bad) 2010-Apr-01 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.206 (still bad) 2010-Apr-01 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.198 (still bad) 2010-Apr-01 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.461 and 1.199 (still bad) 2010-Apr-01 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.350 and 1.203 (still bad) 2010-Apr-01 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.347 and 1.200 (still bad) 2010-Apr-01 01:09:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.382 < 0.75)! 2010-Apr-01 01:09:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.203 1.042 1.005 2010-Apr-01 01:09:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.382 1.162 1.164 1.001 2010-Apr-01 01:09:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.900 1.197 1.016 2010-Apr-01 01:09:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.920 1.061 1.067 2010-Apr-01 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.209 (still bad) 2010-Apr-01 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.200 (still bad) 2010-Apr-01 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.201 (still bad) 2010-Apr-01 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.201 (still bad) 2010-Apr-01 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.345 and 1.197 (still bad) 2010-Apr-01 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.197 (still bad) 2010-Apr-01 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.350 and 1.204 (still bad) 2010-Apr-01 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.197 (still bad) 2010-Apr-01 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.356 and 1.197 (still bad) 2010-Apr-01 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.200 (still bad) 2010-Apr-01 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.352 and 1.196 (still bad) 2010-Apr-01 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.350 and 1.200 (still bad) 2010-Apr-01 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.207 (still bad) 2010-Apr-01 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.356 and 1.198 (still bad) 2010-Apr-01 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.195 (still bad) 2010-Apr-01 01:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.198 (still bad) 2010-Apr-01 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.195 (still bad) 2010-Apr-01 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.197 (still bad) 2010-Apr-01 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.209 (still bad) 2010-Apr-01 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.207 (still bad) 2010-Apr-01 01:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.211 (still bad) 2010-Apr-01 01:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.219 (still bad) 2010-Apr-01 01:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.220 (still bad) 2010-Apr-01 01:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.223 (still bad) 2010-Apr-01 01:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.231 (still bad) 2010-Apr-01 01:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 01:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.354 and 1.217 (still bad) 2010-Apr-01 01:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.219 (still bad) 2010-Apr-01 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.207 (still bad) 2010-Apr-01 01:10:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.390 < 0.75)! 2010-Apr-01 01:10:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.205 1.039 1.007 2010-Apr-01 01:10:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.390 1.164 1.162 1.000 2010-Apr-01 01:10:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.901 1.198 1.017 2010-Apr-01 01:10:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.919 1.059 1.068 2010-Apr-01 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.209 (still bad) 2010-Apr-01 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.206 (still bad) 2010-Apr-01 01:10:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:10:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:10:35 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:10:35 LOG5 end_task: Level: (2) ID = <10416> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG1 fixed_driftmap: New position: year = 2010.249278620681 RA = 13:47:59.4 RA/Dec = 13:48:31.0 +19:17:22.8 2010-Apr-01 01:10:35 NOTE fixed_driftmap: Correcting ZA to 6:29:12.9 ... 2010-Apr-01 01:10:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4869293559 -CF 2010-Apr-01 01:10:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:10:35 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:10:35 LOG5 begin_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:10:35 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:10:35 LOG5 begin_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:10:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:10:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:10:35 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:10:35 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4869293559 -CF 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:10:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:10:35 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:10:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:10:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:10:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:10:35 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2010-Apr-01 01:10:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:10:36 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:10:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:10:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:10:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:10:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:10:36 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:10:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:10:36 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:10:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:10:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:10:36 LOG5 end_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:10:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:10:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:10:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:10:36 LOG5 begin_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:10:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:10:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:10:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:10:36 LOG5 end_task: Level: (3) ID = <10423> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:10:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:10:36 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:10:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:10:36 INFO2 take_data: Starting WAPP 1-second scan: 9100014 2010-Apr-01 01:10:36 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:10:36 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-Apr-01 01:10:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.207 (still bad) 2010-Apr-01 01:10:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:10:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18637.00 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.343 and 1.648 (still bad) 2010-Apr-01 01:10:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:10:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:10:38 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:10:38 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:10:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:10:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:10:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:10:38 LOG5 begin_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:10:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:10:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:10:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:10:38 LOG5 end_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:10:38 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:10:38 LOG5 finish_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:10:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:10:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:10:38 LOG5 end_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2010-Apr-01 01:10:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 36 of 99 2010-Apr-01 01:10:38 LOG4 send_obs_status: To obs_status: <1> LOOP 36 2010-Apr-01 01:10:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:10:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:10:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:10:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:10:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:10:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:10:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:10:39 LOG5 begin_task: Level: (2) ID = <10427> Status = 0 0 0 0 ok 2010-Apr-01 01:10:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:10:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:10:39 INFO2 take_data: Starting WAPP 600-second scan: 9100015 2010-Apr-01 01:10:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:10:39 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2010-Apr-01 01:10:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:10:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:10:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:10:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0007.fits 2010-Apr-01 01:10:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18640.00 2010-Apr-01 01:10:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0007.fits} 2010-Apr-01 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.652 (still bad) 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.226 (still bad) 2010-Apr-01 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.225 (still bad) 2010-Apr-01 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.220 (still bad) 2010-Apr-01 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.216 (still bad) 2010-Apr-01 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.211 (still bad) 2010-Apr-01 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.204 (still bad) 2010-Apr-01 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.202 (still bad) 2010-Apr-01 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.206 (still bad) 2010-Apr-01 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.198 (still bad) 2010-Apr-01 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.322 and 1.200 (still bad) 2010-Apr-01 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.201 (still bad) 2010-Apr-01 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.200 (still bad) 2010-Apr-01 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.202 (still bad) 2010-Apr-01 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.207 (still bad) 2010-Apr-01 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.200 (still bad) 2010-Apr-01 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.198 (still bad) 2010-Apr-01 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.198 (still bad) 2010-Apr-01 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.197 (still bad) 2010-Apr-01 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.197 (still bad) 2010-Apr-01 01:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.202 (still bad) 2010-Apr-01 01:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.198 (still bad) 2010-Apr-01 01:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.198 (still bad) 2010-Apr-01 01:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.201 (still bad) 2010-Apr-01 01:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.199 (still bad) 2010-Apr-01 01:11:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.395 < 0.75)! 2010-Apr-01 01:11:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.202 1.039 1.008 2010-Apr-01 01:11:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.395 1.166 1.161 1.002 2010-Apr-01 01:11:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.169 0.904 1.194 1.014 2010-Apr-01 01:11:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.919 1.060 1.068 2010-Apr-01 01:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.206 (still bad) 2010-Apr-01 01:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.201 (still bad) 2010-Apr-01 01:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.351 and 1.203 (still bad) 2010-Apr-01 01:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.205 (still bad) 2010-Apr-01 01:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.204 (still bad) 2010-Apr-01 01:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.205 (still bad) 2010-Apr-01 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.209 (still bad) 2010-Apr-01 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.203 (still bad) 2010-Apr-01 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.200 (still bad) 2010-Apr-01 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.201 (still bad) 2010-Apr-01 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.198 (still bad) 2010-Apr-01 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.197 (still bad) 2010-Apr-01 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.202 (still bad) 2010-Apr-01 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.197 (still bad) 2010-Apr-01 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.194 (still bad) 2010-Apr-01 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.201 (still bad) 2010-Apr-01 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.197 (still bad) 2010-Apr-01 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.197 (still bad) 2010-Apr-01 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.203 (still bad) 2010-Apr-01 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.198 (still bad) 2010-Apr-01 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.197 (still bad) 2010-Apr-01 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.325 and 1.197 (still bad) 2010-Apr-01 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.333 and 1.197 (still bad) 2010-Apr-01 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.199 (still bad) 2010-Apr-01 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.203 (still bad) 2010-Apr-01 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.196 (still bad) 2010-Apr-01 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.196 (still bad) 2010-Apr-01 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.198 (still bad) 2010-Apr-01 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.195 (still bad) 2010-Apr-01 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.198 (still bad) 2010-Apr-01 01:12:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.404 < 0.75)! 2010-Apr-01 01:12:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.202 1.045 1.012 2010-Apr-01 01:12:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.404 1.167 1.164 1.005 2010-Apr-01 01:12:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.168 0.905 1.195 1.015 2010-Apr-01 01:12:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.921 1.061 1.069 2010-Apr-01 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.197 (still bad) 2010-Apr-01 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.199 (still bad) 2010-Apr-01 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.192 (still bad) 2010-Apr-01 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.195 (still bad) 2010-Apr-01 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.200 (still bad) 2010-Apr-01 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.198 (still bad) 2010-Apr-01 01:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.194 (still bad) 2010-Apr-01 01:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.196 (still bad) 2010-Apr-01 01:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.193 (still bad) 2010-Apr-01 01:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.193 (still bad) 2010-Apr-01 01:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.197 (still bad) 2010-Apr-01 01:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.196 (still bad) 2010-Apr-01 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.195 (still bad) 2010-Apr-01 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.198 (still bad) 2010-Apr-01 01:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.196 (still bad) 2010-Apr-01 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.197 (still bad) 2010-Apr-01 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.203 (still bad) 2010-Apr-01 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.198 (still bad) 2010-Apr-01 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.198 (still bad) 2010-Apr-01 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.200 (still bad) 2010-Apr-01 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.197 (still bad) 2010-Apr-01 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.201 (still bad) 2010-Apr-01 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.209 (still bad) 2010-Apr-01 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.201 (still bad) 2010-Apr-01 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.198 (still bad) 2010-Apr-01 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.202 (still bad) 2010-Apr-01 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.196 (still bad) 2010-Apr-01 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.198 (still bad) 2010-Apr-01 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.204 (still bad) 2010-Apr-01 01:13:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.385 < 0.75)! 2010-Apr-01 01:13:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.200 1.040 1.008 2010-Apr-01 01:13:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.385 1.164 1.211 1.032 2010-Apr-01 01:13:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.904 1.195 1.014 2010-Apr-01 01:13:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.926 1.068 1.073 2010-Apr-01 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.221 (still bad) 2010-Apr-01 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.231 (still bad) 2010-Apr-01 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.228 (still bad) 2010-Apr-01 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.221 (still bad) 2010-Apr-01 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.218 (still bad) 2010-Apr-01 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.200 (still bad) 2010-Apr-01 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.204 (still bad) 2010-Apr-01 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.216 (still bad) 2010-Apr-01 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.219 (still bad) 2010-Apr-01 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.231 (still bad) 2010-Apr-01 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.244 (still bad) 2010-Apr-01 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.241 (still bad) 2010-Apr-01 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.237 (still bad) 2010-Apr-01 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.236 (still bad) 2010-Apr-01 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.223 (still bad) 2010-Apr-01 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.215 (still bad) 2010-Apr-01 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.214 (still bad) 2010-Apr-01 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.204 (still bad) 2010-Apr-01 01:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.216 (still bad) 2010-Apr-01 01:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.237 (still bad) 2010-Apr-01 01:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.260 (still bad) 2010-Apr-01 01:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.283 (still bad) 2010-Apr-01 01:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.314 (still bad) 2010-Apr-01 01:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.319 (still bad) 2010-Apr-01 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.321 (still bad) 2010-Apr-01 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.317 (still bad) 2010-Apr-01 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.299 (still bad) 2010-Apr-01 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.279 (still bad) 2010-Apr-01 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.261 (still bad) 2010-Apr-01 01:14:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.389 < 0.75)! 2010-Apr-01 01:14:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.194 1.037 1.006 2010-Apr-01 01:14:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.389 1.163 1.162 1.002 2010-Apr-01 01:14:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.904 1.228 1.040 2010-Apr-01 01:14:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.924 1.061 1.071 2010-Apr-01 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.214 (still bad) 2010-Apr-01 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.210 (still bad) 2010-Apr-01 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.201 (still bad) 2010-Apr-01 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.206 (still bad) 2010-Apr-01 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.216 (still bad) 2010-Apr-01 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.209 (still bad) 2010-Apr-01 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.207 (still bad) 2010-Apr-01 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.207 (still bad) 2010-Apr-01 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.201 (still bad) 2010-Apr-01 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.198 (still bad) 2010-Apr-01 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.205 (still bad) 2010-Apr-01 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.197 (still bad) 2010-Apr-01 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.194 (still bad) 2010-Apr-01 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.197 (still bad) 2010-Apr-01 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.196 (still bad) 2010-Apr-01 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.198 (still bad) 2010-Apr-01 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.203 (still bad) 2010-Apr-01 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.199 (still bad) 2010-Apr-01 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.196 (still bad) 2010-Apr-01 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.198 (still bad) 2010-Apr-01 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.200 (still bad) 2010-Apr-01 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.197 (still bad) 2010-Apr-01 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.205 (still bad) 2010-Apr-01 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.196 (still bad) 2010-Apr-01 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.199 (still bad) 2010-Apr-01 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.199 (still bad) 2010-Apr-01 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.202 (still bad) 2010-Apr-01 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.201 (still bad) 2010-Apr-01 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.202 (still bad) 2010-Apr-01 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.200 (still bad) 2010-Apr-01 01:15:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.387 < 0.75)! 2010-Apr-01 01:15:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 1.200 1.037 1.011 2010-Apr-01 01:15:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.387 1.165 1.161 1.002 2010-Apr-01 01:15:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.164 0.905 1.194 1.016 2010-Apr-01 01:15:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.924 1.057 1.071 2010-Apr-01 01:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.200 (still bad) 2010-Apr-01 01:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.201 (still bad) 2010-Apr-01 01:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.202 (still bad) 2010-Apr-01 01:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.200 (still bad) 2010-Apr-01 01:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.201 (still bad) 2010-Apr-01 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.562 and 1.199 (still bad) 2010-Apr-01 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.199 (still bad) 2010-Apr-01 01:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.354 and 1.197 (still bad) 2010-Apr-01 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.357 and 1.201 (still bad) 2010-Apr-01 01:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.199 (still bad) 2010-Apr-01 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.199 (still bad) 2010-Apr-01 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.202 (still bad) 2010-Apr-01 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.196 (still bad) 2010-Apr-01 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.197 (still bad) 2010-Apr-01 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.206 (still bad) 2010-Apr-01 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.201 (still bad) 2010-Apr-01 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.197 (still bad) 2010-Apr-01 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.200 (still bad) 2010-Apr-01 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.195 (still bad) 2010-Apr-01 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.195 (still bad) 2010-Apr-01 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.205 (still bad) 2010-Apr-01 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.199 (still bad) 2010-Apr-01 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.195 (still bad) 2010-Apr-01 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.200 (still bad) 2010-Apr-01 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.198 (still bad) 2010-Apr-01 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.200 (still bad) 2010-Apr-01 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.206 (still bad) 2010-Apr-01 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.202 (still bad) 2010-Apr-01 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.197 (still bad) 2010-Apr-01 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.201 (still bad) 2010-Apr-01 01:16:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.393 < 0.75)! 2010-Apr-01 01:16:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.197 1.037 1.008 2010-Apr-01 01:16:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.393 1.163 1.160 0.999 2010-Apr-01 01:16:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.163 0.903 1.194 1.016 2010-Apr-01 01:16:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.921 1.059 1.068 2010-Apr-01 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.530 and 1.199 (still bad) 2010-Apr-01 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.206 (still bad) 2010-Apr-01 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.518 and 1.199 (still bad) 2010-Apr-01 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.480 and 1.200 (still bad) 2010-Apr-01 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.475 and 1.202 (still bad) 2010-Apr-01 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.473 and 1.198 (still bad) 2010-Apr-01 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.200 (still bad) 2010-Apr-01 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.203 (still bad) 2010-Apr-01 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.200 (still bad) 2010-Apr-01 01:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.198 (still bad) 2010-Apr-01 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.522 and 1.201 (still bad) 2010-Apr-01 01:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.559 and 1.198 (still bad) 2010-Apr-01 01:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.198 (still bad) 2010-Apr-01 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.436 and 1.201 (still bad) 2010-Apr-01 01:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.198 (still bad) 2010-Apr-01 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.197 (still bad) 2010-Apr-01 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.201 (still bad) 2010-Apr-01 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.199 (still bad) 2010-Apr-01 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.198 (still bad) 2010-Apr-01 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.202 (still bad) 2010-Apr-01 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.200 (still bad) 2010-Apr-01 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.197 (still bad) 2010-Apr-01 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.200 (still bad) 2010-Apr-01 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.197 (still bad) 2010-Apr-01 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.199 (still bad) 2010-Apr-01 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.203 (still bad) 2010-Apr-01 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.201 (still bad) 2010-Apr-01 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.198 (still bad) 2010-Apr-01 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.201 (still bad) 2010-Apr-01 01:17:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.386 < 0.75)! 2010-Apr-01 01:17:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.198 1.036 1.008 2010-Apr-01 01:17:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.386 1.165 1.161 1.001 2010-Apr-01 01:17:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.163 0.904 1.194 1.016 2010-Apr-01 01:17:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.921 1.058 1.069 2010-Apr-01 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.198 (still bad) 2010-Apr-01 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.205 (still bad) 2010-Apr-01 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.196 (still bad) 2010-Apr-01 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.197 (still bad) 2010-Apr-01 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.201 (still bad) 2010-Apr-01 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.196 (still bad) 2010-Apr-01 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.200 (still bad) 2010-Apr-01 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.207 (still bad) 2010-Apr-01 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.198 (still bad) 2010-Apr-01 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.198 (still bad) 2010-Apr-01 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.201 (still bad) 2010-Apr-01 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.198 (still bad) 2010-Apr-01 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.199 (still bad) 2010-Apr-01 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.207 (still bad) 2010-Apr-01 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.197 (still bad) 2010-Apr-01 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.197 (still bad) 2010-Apr-01 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.201 (still bad) 2010-Apr-01 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.197 (still bad) 2010-Apr-01 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.201 (still bad) 2010-Apr-01 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.209 (still bad) 2010-Apr-01 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.199 (still bad) 2010-Apr-01 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.199 (still bad) 2010-Apr-01 01:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.202 (still bad) 2010-Apr-01 01:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.196 (still bad) 2010-Apr-01 01:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.200 (still bad) 2010-Apr-01 01:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.206 (still bad) 2010-Apr-01 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.199 (still bad) 2010-Apr-01 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.201 (still bad) 2010-Apr-01 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.203 (still bad) 2010-Apr-01 01:18:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.454 < 0.75)! 2010-Apr-01 01:18:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.199 1.040 1.009 2010-Apr-01 01:18:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.454 1.213 1.172 1.014 2010-Apr-01 01:18:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.163 0.903 1.194 1.017 2010-Apr-01 01:18:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.918 1.058 1.067 2010-Apr-01 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.434 and 1.231 (still bad) 2010-Apr-01 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.441 and 1.252 (still bad) 2010-Apr-01 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.247 (still bad) 2010-Apr-01 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.239 (still bad) 2010-Apr-01 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.223 (still bad) 2010-Apr-01 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.206 (still bad) 2010-Apr-01 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.215 (still bad) 2010-Apr-01 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.258 (still bad) 2010-Apr-01 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.439 and 1.332 (still bad) 2010-Apr-01 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.456 and 1.449 (still bad) 2010-Apr-01 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.584 and 1.599 (still bad) 2010-Apr-01 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.751 (still bad) 2010-Apr-01 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.653 and 1.872 (still bad) 2010-Apr-01 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.656 and 1.953 (still bad) 2010-Apr-01 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.647 and 1.960 (still bad) 2010-Apr-01 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.587 and 1.861 (still bad) 2010-Apr-01 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.740 (still bad) 2010-Apr-01 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.513 and 1.598 (still bad) 2010-Apr-01 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.463 (still bad) 2010-Apr-01 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.468 and 1.346 (still bad) 2010-Apr-01 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.429 and 1.265 (still bad) 2010-Apr-01 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.346 (still bad) 2010-Apr-01 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.450 (still bad) 2010-Apr-01 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.569 (still bad) 2010-Apr-01 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.678 (still bad) 2010-Apr-01 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.754 (still bad) 2010-Apr-01 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.777 (still bad) 2010-Apr-01 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.752 (still bad) 2010-Apr-01 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.672 (still bad) 2010-Apr-01 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.568 (still bad) 2010-Apr-01 01:19:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.399 < 0.75)! 2010-Apr-01 01:19:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.131 1.452 1.042 1.014 2010-Apr-01 01:19:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.399 1.173 1.163 1.008 2010-Apr-01 01:19:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.906 1.199 1.021 2010-Apr-01 01:19:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.963 1.088 1.118 2010-Apr-01 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.348 (still bad) 2010-Apr-01 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.272 (still bad) 2010-Apr-01 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.256 (still bad) 2010-Apr-01 01:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.297 (still bad) 2010-Apr-01 01:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.316 (still bad) 2010-Apr-01 01:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.312 (still bad) 2010-Apr-01 01:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.281 (still bad) 2010-Apr-01 01:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.230 (still bad) 2010-Apr-01 01:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.227 (still bad) 2010-Apr-01 01:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.217 (still bad) 2010-Apr-01 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.212 (still bad) 2010-Apr-01 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.205 (still bad) 2010-Apr-01 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.208 (still bad) 2010-Apr-01 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.220 (still bad) 2010-Apr-01 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.230 (still bad) 2010-Apr-01 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.240 (still bad) 2010-Apr-01 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.247 (still bad) 2010-Apr-01 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.243 (still bad) 2010-Apr-01 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.232 (still bad) 2010-Apr-01 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.223 (still bad) 2010-Apr-01 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.208 (still bad) 2010-Apr-01 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.204 (still bad) 2010-Apr-01 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.207 (still bad) 2010-Apr-01 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.208 (still bad) 2010-Apr-01 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.205 (still bad) 2010-Apr-01 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.204 (still bad) 2010-Apr-01 01:20:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:20:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:20:40 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:20:40 LOG5 end_task: Level: (2) ID = <10427> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 LOG1 fixed_driftmap: New position: year = 2010.2492977919742 RA = 13:58:08.3 RA/Dec = 13:58:39.7 +19:17:26.9 2010-Apr-01 01:20:40 NOTE fixed_driftmap: Correcting ZA to 6:29:45.4 ... 2010-Apr-01 01:20:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.4959385169 -CF 2010-Apr-01 01:20:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:20:40 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:20:40 LOG5 begin_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:20:40 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:20:40 LOG5 begin_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:20:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:20:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:20:40 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:20:40 LOG5 begin_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.4959385169 -CF 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:20:40 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:20:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:20:40 LOG5 end_task: Level: (4) ID = <10431> Status = 0 0 0 0 ok 2010-Apr-01 01:20:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:20:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:20:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:20:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:20:41 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:20:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:20:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:20:41 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:20:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:20:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:20:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:20:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:20:41 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:20:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:20:41 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:20:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:20:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:20:41 LOG5 end_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:20:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:20:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:20:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:20:41 LOG5 begin_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:20:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:20:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:20:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:20:41 LOG5 end_task: Level: (3) ID = <10434> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:20:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:20:41 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:20:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:20:41 INFO2 take_data: Starting WAPP 1-second scan: 9100016 2010-Apr-01 01:20:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:20:41 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-Apr-01 01:20:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.202 (still bad) 2010-Apr-01 01:20:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:20:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19242.00 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:20:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:20:43 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:20:43 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:20:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:20:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:20:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:20:43 LOG5 begin_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.627 (still bad) 2010-Apr-01 01:20:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:20:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:20:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:20:43 LOG5 end_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:20:43 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:20:43 LOG5 finish_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:20:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:20:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:20:43 LOG5 end_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2010-Apr-01 01:20:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 37 of 99 2010-Apr-01 01:20:43 LOG4 send_obs_status: To obs_status: <1> LOOP 37 2010-Apr-01 01:20:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:20:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:20:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:20:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:20:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:20:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:20:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:20:44 LOG5 begin_task: Level: (2) ID = <10438> Status = 0 0 0 0 ok 2010-Apr-01 01:20:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:20:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:20:44 INFO2 take_data: Starting WAPP 600-second scan: 9100017 2010-Apr-01 01:20:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:20:44 LOG5 begin_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2010-Apr-01 01:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:20:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:20:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19245.00 2010-Apr-01 01:20:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0008.fits 2010-Apr-01 01:20:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0008.fits} 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:20:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.510 < 0.75)! 2010-Apr-01 01:20:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.327 1.654 1.419 1.393 2010-Apr-01 01:20:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.510 1.619 1.618 1.384 2010-Apr-01 01:20:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.167 0.911 1.197 1.022 2010-Apr-01 01:20:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.925 1.060 1.073 2010-Apr-01 01:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.202 (still bad) 2010-Apr-01 01:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.204 (still bad) 2010-Apr-01 01:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.203 (still bad) 2010-Apr-01 01:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.203 (still bad) 2010-Apr-01 01:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.207 (still bad) 2010-Apr-01 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.203 (still bad) 2010-Apr-01 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.205 (still bad) 2010-Apr-01 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.205 (still bad) 2010-Apr-01 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.208 (still bad) 2010-Apr-01 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.213 (still bad) 2010-Apr-01 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.206 (still bad) 2010-Apr-01 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.206 (still bad) 2010-Apr-01 01:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.204 (still bad) 2010-Apr-01 01:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.209 (still bad) 2010-Apr-01 01:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.212 (still bad) 2010-Apr-01 01:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.207 (still bad) 2010-Apr-01 01:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.204 (still bad) 2010-Apr-01 01:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.206 (still bad) 2010-Apr-01 01:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.205 (still bad) 2010-Apr-01 01:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.205 (still bad) 2010-Apr-01 01:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.202 (still bad) 2010-Apr-01 01:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.206 (still bad) 2010-Apr-01 01:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.202 (still bad) 2010-Apr-01 01:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.215 (still bad) 2010-Apr-01 01:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.243 (still bad) 2010-Apr-01 01:21:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.412 < 0.75)! 2010-Apr-01 01:21:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.204 1.039 1.018 2010-Apr-01 01:21:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.412 1.253 1.178 1.020 2010-Apr-01 01:21:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.173 0.914 1.192 1.019 2010-Apr-01 01:21:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.928 1.062 1.077 2010-Apr-01 01:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.267 (still bad) 2010-Apr-01 01:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.428 and 1.281 (still bad) 2010-Apr-01 01:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.273 (still bad) 2010-Apr-01 01:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.422 and 1.266 (still bad) 2010-Apr-01 01:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.419 and 1.260 (still bad) 2010-Apr-01 01:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.233 (still bad) 2010-Apr-01 01:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.223 (still bad) 2010-Apr-01 01:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.217 (still bad) 2010-Apr-01 01:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.211 (still bad) 2010-Apr-01 01:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.215 (still bad) 2010-Apr-01 01:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.234 (still bad) 2010-Apr-01 01:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.242 (still bad) 2010-Apr-01 01:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.252 (still bad) 2010-Apr-01 01:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.263 (still bad) 2010-Apr-01 01:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.268 (still bad) 2010-Apr-01 01:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.269 (still bad) 2010-Apr-01 01:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.271 (still bad) 2010-Apr-01 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.252 (still bad) 2010-Apr-01 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.239 (still bad) 2010-Apr-01 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.230 (still bad) 2010-Apr-01 01:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.212 (still bad) 2010-Apr-01 01:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.206 (still bad) 2010-Apr-01 01:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.207 (still bad) 2010-Apr-01 01:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.218 (still bad) 2010-Apr-01 01:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.221 (still bad) 2010-Apr-01 01:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.223 (still bad) 2010-Apr-01 01:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.219 (still bad) 2010-Apr-01 01:22:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.398 < 0.75)! 2010-Apr-01 01:22:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.206 1.041 1.019 2010-Apr-01 01:22:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.398 1.170 1.165 1.005 2010-Apr-01 01:22:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.169 0.910 1.214 1.035 2010-Apr-01 01:22:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.925 1.062 1.076 2010-Apr-01 01:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.212 (still bad) 2010-Apr-01 01:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.206 (still bad) 2010-Apr-01 01:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.206 (still bad) 2010-Apr-01 01:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.206 (still bad) 2010-Apr-01 01:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.207 (still bad) 2010-Apr-01 01:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.210 (still bad) 2010-Apr-01 01:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.210 (still bad) 2010-Apr-01 01:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.211 (still bad) 2010-Apr-01 01:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.207 (still bad) 2010-Apr-01 01:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.206 (still bad) 2010-Apr-01 01:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.206 (still bad) 2010-Apr-01 01:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.207 (still bad) 2010-Apr-01 01:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.206 (still bad) 2010-Apr-01 01:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.206 (still bad) 2010-Apr-01 01:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.204 (still bad) 2010-Apr-01 01:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.203 (still bad) 2010-Apr-01 01:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.205 (still bad) 2010-Apr-01 01:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.205 (still bad) 2010-Apr-01 01:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.204 (still bad) 2010-Apr-01 01:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.204 (still bad) 2010-Apr-01 01:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.204 (still bad) 2010-Apr-01 01:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.203 (still bad) 2010-Apr-01 01:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.205 (still bad) 2010-Apr-01 01:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.202 (still bad) 2010-Apr-01 01:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.203 (still bad) 2010-Apr-01 01:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.204 (still bad) 2010-Apr-01 01:23:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.387 < 0.75)! 2010-Apr-01 01:23:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.204 1.041 1.012 2010-Apr-01 01:23:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.387 1.167 1.164 1.004 2010-Apr-01 01:23:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.906 1.196 1.018 2010-Apr-01 01:23:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.919 1.060 1.068 2010-Apr-01 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.203 (still bad) 2010-Apr-01 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.206 (still bad) 2010-Apr-01 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.202 (still bad) 2010-Apr-01 01:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.205 (still bad) 2010-Apr-01 01:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.206 (still bad) 2010-Apr-01 01:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.203 (still bad) 2010-Apr-01 01:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.204 (still bad) 2010-Apr-01 01:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.205 (still bad) 2010-Apr-01 01:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.204 (still bad) 2010-Apr-01 01:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.205 (still bad) 2010-Apr-01 01:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.199 (still bad) 2010-Apr-01 01:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.203 (still bad) 2010-Apr-01 01:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.204 (still bad) 2010-Apr-01 01:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.206 (still bad) 2010-Apr-01 01:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.208 (still bad) 2010-Apr-01 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.207 (still bad) 2010-Apr-01 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.202 (still bad) 2010-Apr-01 01:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.204 (still bad) 2010-Apr-01 01:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.200 (still bad) 2010-Apr-01 01:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.200 (still bad) 2010-Apr-01 01:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.204 (still bad) 2010-Apr-01 01:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.202 (still bad) 2010-Apr-01 01:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.200 (still bad) 2010-Apr-01 01:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.201 (still bad) 2010-Apr-01 01:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.457 and 1.202 (still bad) 2010-Apr-01 01:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.445 and 1.204 (still bad) 2010-Apr-01 01:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.207 (still bad) 2010-Apr-01 01:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.203 (still bad) 2010-Apr-01 01:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.206 (still bad) 2010-Apr-01 01:24:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.398 < 0.75)! 2010-Apr-01 01:24:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.205 1.044 1.015 2010-Apr-01 01:24:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.398 1.171 1.161 1.009 2010-Apr-01 01:24:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.908 1.199 1.019 2010-Apr-01 01:24:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.923 1.064 1.073 2010-Apr-01 01:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.206 (still bad) 2010-Apr-01 01:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.205 (still bad) 2010-Apr-01 01:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.209 (still bad) 2010-Apr-01 01:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.209 (still bad) 2010-Apr-01 01:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.206 (still bad) 2010-Apr-01 01:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.209 (still bad) 2010-Apr-01 01:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.207 (still bad) 2010-Apr-01 01:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.209 (still bad) 2010-Apr-01 01:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.208 (still bad) 2010-Apr-01 01:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.208 (still bad) 2010-Apr-01 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.539 and 1.205 (still bad) 2010-Apr-01 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.571 and 1.207 (still bad) 2010-Apr-01 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.203 (still bad) 2010-Apr-01 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.206 (still bad) 2010-Apr-01 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.208 (still bad) 2010-Apr-01 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.208 (still bad) 2010-Apr-01 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.205 (still bad) 2010-Apr-01 01:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.206 (still bad) 2010-Apr-01 01:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.207 (still bad) 2010-Apr-01 01:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.206 (still bad) 2010-Apr-01 01:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.210 (still bad) 2010-Apr-01 01:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.208 (still bad) 2010-Apr-01 01:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.207 (still bad) 2010-Apr-01 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.208 (still bad) 2010-Apr-01 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.206 (still bad) 2010-Apr-01 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.209 (still bad) 2010-Apr-01 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.207 (still bad) 2010-Apr-01 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.208 (still bad) 2010-Apr-01 01:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.206 (still bad) 2010-Apr-01 01:25:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.391 < 0.75)! 2010-Apr-01 01:25:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.211 1.044 1.014 2010-Apr-01 01:25:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.391 1.174 1.163 1.008 2010-Apr-01 01:25:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.908 1.195 1.021 2010-Apr-01 01:25:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.923 1.064 1.071 2010-Apr-01 01:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.210 (still bad) 2010-Apr-01 01:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.213 (still bad) 2010-Apr-01 01:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.225 (still bad) 2010-Apr-01 01:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.217 (still bad) 2010-Apr-01 01:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.219 (still bad) 2010-Apr-01 01:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.217 (still bad) 2010-Apr-01 01:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.217 (still bad) 2010-Apr-01 01:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.214 (still bad) 2010-Apr-01 01:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.219 (still bad) 2010-Apr-01 01:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.210 (still bad) 2010-Apr-01 01:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.207 (still bad) 2010-Apr-01 01:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.204 (still bad) 2010-Apr-01 01:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.205 (still bad) 2010-Apr-01 01:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.214 (still bad) 2010-Apr-01 01:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.206 (still bad) 2010-Apr-01 01:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.204 (still bad) 2010-Apr-01 01:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.208 (still bad) 2010-Apr-01 01:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.203 (still bad) 2010-Apr-01 01:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.205 (still bad) 2010-Apr-01 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.204 (still bad) 2010-Apr-01 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.205 (still bad) 2010-Apr-01 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.201 (still bad) 2010-Apr-01 01:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.204 (still bad) 2010-Apr-01 01:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.210 (still bad) 2010-Apr-01 01:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.206 (still bad) 2010-Apr-01 01:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.204 (still bad) 2010-Apr-01 01:26:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.391 < 0.75)! 2010-Apr-01 01:26:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.207 1.046 1.013 2010-Apr-01 01:26:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.391 1.171 1.168 1.011 2010-Apr-01 01:26:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.166 0.908 1.200 1.023 2010-Apr-01 01:26:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.927 1.064 1.074 2010-Apr-01 01:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.202 (still bad) 2010-Apr-01 01:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.204 (still bad) 2010-Apr-01 01:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.204 (still bad) 2010-Apr-01 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.203 (still bad) 2010-Apr-01 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.206 (still bad) 2010-Apr-01 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.203 (still bad) 2010-Apr-01 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.207 (still bad) 2010-Apr-01 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.215 (still bad) 2010-Apr-01 01:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.208 (still bad) 2010-Apr-01 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.206 (still bad) 2010-Apr-01 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.206 (still bad) 2010-Apr-01 01:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.205 (still bad) 2010-Apr-01 01:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.207 (still bad) 2010-Apr-01 01:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.207 (still bad) 2010-Apr-01 01:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.206 (still bad) 2010-Apr-01 01:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.454 and 1.206 (still bad) 2010-Apr-01 01:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.204 (still bad) 2010-Apr-01 01:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.205 (still bad) 2010-Apr-01 01:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.209 (still bad) 2010-Apr-01 01:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.206 (still bad) 2010-Apr-01 01:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.203 (still bad) 2010-Apr-01 01:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.204 (still bad) 2010-Apr-01 01:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.202 (still bad) 2010-Apr-01 01:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.206 (still bad) 2010-Apr-01 01:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.206 (still bad) 2010-Apr-01 01:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.207 (still bad) 2010-Apr-01 01:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.207 (still bad) 2010-Apr-01 01:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.206 (still bad) 2010-Apr-01 01:27:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.412 < 0.75)! 2010-Apr-01 01:27:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.209 1.042 1.013 2010-Apr-01 01:27:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.412 1.168 1.163 1.007 2010-Apr-01 01:27:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.911 1.200 1.021 2010-Apr-01 01:27:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.924 1.062 1.072 2010-Apr-01 01:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.206 (still bad) 2010-Apr-01 01:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.208 (still bad) 2010-Apr-01 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.204 (still bad) 2010-Apr-01 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.206 (still bad) 2010-Apr-01 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.203 (still bad) 2010-Apr-01 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.203 (still bad) 2010-Apr-01 01:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.436 and 1.202 (still bad) 2010-Apr-01 01:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.206 (still bad) 2010-Apr-01 01:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.207 (still bad) 2010-Apr-01 01:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.205 (still bad) 2010-Apr-01 01:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.205 (still bad) 2010-Apr-01 01:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.207 (still bad) 2010-Apr-01 01:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.207 (still bad) 2010-Apr-01 01:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.203 (still bad) 2010-Apr-01 01:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.203 (still bad) 2010-Apr-01 01:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.204 (still bad) 2010-Apr-01 01:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.205 (still bad) 2010-Apr-01 01:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.206 (still bad) 2010-Apr-01 01:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.206 (still bad) 2010-Apr-01 01:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.204 (still bad) 2010-Apr-01 01:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.204 (still bad) 2010-Apr-01 01:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.203 (still bad) 2010-Apr-01 01:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.460 and 1.204 (still bad) 2010-Apr-01 01:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.503 and 1.206 (still bad) 2010-Apr-01 01:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.205 (still bad) 2010-Apr-01 01:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.204 (still bad) 2010-Apr-01 01:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.206 (still bad) 2010-Apr-01 01:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.208 (still bad) 2010-Apr-01 01:28:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.395 < 0.75)! 2010-Apr-01 01:28:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.205 1.043 1.015 2010-Apr-01 01:28:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.395 1.172 1.170 1.005 2010-Apr-01 01:28:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.174 0.911 1.199 1.021 2010-Apr-01 01:28:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.926 1.064 1.073 2010-Apr-01 01:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.206 (still bad) 2010-Apr-01 01:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.204 (still bad) 2010-Apr-01 01:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.204 (still bad) 2010-Apr-01 01:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.205 (still bad) 2010-Apr-01 01:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.205 (still bad) 2010-Apr-01 01:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.207 (still bad) 2010-Apr-01 01:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.206 (still bad) 2010-Apr-01 01:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.205 (still bad) 2010-Apr-01 01:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.205 (still bad) 2010-Apr-01 01:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.207 (still bad) 2010-Apr-01 01:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.207 (still bad) 2010-Apr-01 01:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.215 (still bad) 2010-Apr-01 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.206 (still bad) 2010-Apr-01 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.205 (still bad) 2010-Apr-01 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.645 and 1.207 (still bad) 2010-Apr-01 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.208 (still bad) 2010-Apr-01 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.509 and 1.209 (still bad) 2010-Apr-01 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.486 and 1.211 (still bad) 2010-Apr-01 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.440 and 1.210 (still bad) 2010-Apr-01 01:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.207 (still bad) 2010-Apr-01 01:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 1.210 (still bad) 2010-Apr-01 01:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.469 and 1.207 (still bad) 2010-Apr-01 01:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.208 (still bad) 2010-Apr-01 01:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.211 (still bad) 2010-Apr-01 01:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.209 (still bad) 2010-Apr-01 01:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.207 (still bad) 2010-Apr-01 01:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.211 (still bad) 2010-Apr-01 01:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.211 (still bad) 2010-Apr-01 01:29:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.401 < 0.75)! 2010-Apr-01 01:29:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.208 1.048 1.019 2010-Apr-01 01:29:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.401 1.174 1.171 1.008 2010-Apr-01 01:29:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.172 0.908 1.201 1.018 2010-Apr-01 01:29:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.925 1.066 1.073 2010-Apr-01 01:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.432 and 1.212 (still bad) 2010-Apr-01 01:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.208 (still bad) 2010-Apr-01 01:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.208 (still bad) 2010-Apr-01 01:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.211 (still bad) 2010-Apr-01 01:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.209 (still bad) 2010-Apr-01 01:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.211 (still bad) 2010-Apr-01 01:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.211 (still bad) 2010-Apr-01 01:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.209 (still bad) 2010-Apr-01 01:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.209 (still bad) 2010-Apr-01 01:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.213 (still bad) 2010-Apr-01 01:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.211 (still bad) 2010-Apr-01 01:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.474 and 1.211 (still bad) 2010-Apr-01 01:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.434 and 1.210 (still bad) 2010-Apr-01 01:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.432 and 1.211 (still bad) 2010-Apr-01 01:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.413 and 1.210 (still bad) 2010-Apr-01 01:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.452 and 1.210 (still bad) 2010-Apr-01 01:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.553 and 1.211 (still bad) 2010-Apr-01 01:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.556 and 1.210 (still bad) 2010-Apr-01 01:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.566 and 1.209 (still bad) 2010-Apr-01 01:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.550 and 1.210 (still bad) 2010-Apr-01 01:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.540 and 1.211 (still bad) 2010-Apr-01 01:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.211 (still bad) 2010-Apr-01 01:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.211 (still bad) 2010-Apr-01 01:30:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:30:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:30:45 LOG5 end_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:30:45 LOG5 end_task: Level: (2) ID = <10438> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG1 fixed_driftmap: New position: year = 2010.2493169632673 RA = 14:08:17.5 RA/Dec = 14:08:48.6 +19:17:31.3 2010-Apr-01 01:30:45 NOTE fixed_driftmap: Correcting ZA to 6:30:20.8 ... 2010-Apr-01 01:30:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5057717347 -CF 2010-Apr-01 01:30:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:30:45 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:30:45 LOG5 begin_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:30:45 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:30:45 LOG5 begin_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:30:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:30:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:30:45 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:30:45 LOG5 begin_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5057717347 -CF 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:30:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:30:45 LOG5 end_task: Level: (4) ID = <10442> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:30:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:30:45 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:30:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:30:45 LOG5 begin_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2010-Apr-01 01:30:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.210 (still bad) 2010-Apr-01 01:30:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:30:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:30:46 LOG5 end_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:30:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:30:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:30:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:30:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:30:46 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:30:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:30:46 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:30:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:30:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:30:46 LOG5 end_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:30:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:30:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:30:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:30:46 LOG5 begin_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:30:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:30:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:30:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:30:46 LOG5 end_task: Level: (3) ID = <10445> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:30:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:30:46 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:30:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:30:46 INFO2 take_data: Starting WAPP 1-second scan: 9100018 2010-Apr-01 01:30:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:30:46 LOG5 begin_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-Apr-01 01:30:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:30:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:30:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19847.00 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:30:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:30:48 LOG5 end_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:30:48 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:30:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:30:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:30:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:30:48 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:30:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:30:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:30:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:30:48 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:30:48 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:30:48 LOG5 finish_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:30:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:30:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:30:48 LOG5 end_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2010-Apr-01 01:30:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 38 of 99 2010-Apr-01 01:30:48 LOG4 send_obs_status: To obs_status: <1> LOOP 38 2010-Apr-01 01:30:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:30:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:30:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:30:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:30:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:30:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:30:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:30:49 LOG5 begin_task: Level: (2) ID = <10449> Status = 0 0 0 0 ok 2010-Apr-01 01:30:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:30:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:30:49 INFO2 take_data: Starting WAPP 600-second scan: 9100019 2010-Apr-01 01:30:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:30:49 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2010-Apr-01 01:30:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.656 (still bad) 2010-Apr-01 01:30:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:30:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:30:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19850.00 2010-Apr-01 01:30:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0009.fits 2010-Apr-01 01:30:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0009.fits} 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.551 and 1.656 (still bad) 2010-Apr-01 01:30:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.210 (still bad) 2010-Apr-01 01:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.205 (still bad) 2010-Apr-01 01:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.205 (still bad) 2010-Apr-01 01:30:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.418 < 0.75)! 2010-Apr-01 01:30:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.210 1.048 1.022 2010-Apr-01 01:30:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.418 1.179 1.172 1.010 2010-Apr-01 01:30:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.914 1.204 1.023 2010-Apr-01 01:30:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.931 1.069 1.081 2010-Apr-01 01:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.207 (still bad) 2010-Apr-01 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.209 (still bad) 2010-Apr-01 01:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.208 (still bad) 2010-Apr-01 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.209 (still bad) 2010-Apr-01 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.214 (still bad) 2010-Apr-01 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.208 (still bad) 2010-Apr-01 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.208 (still bad) 2010-Apr-01 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.211 (still bad) 2010-Apr-01 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.209 (still bad) 2010-Apr-01 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.212 (still bad) 2010-Apr-01 01:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.214 (still bad) 2010-Apr-01 01:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.208 (still bad) 2010-Apr-01 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.207 (still bad) 2010-Apr-01 01:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.208 (still bad) 2010-Apr-01 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.210 (still bad) 2010-Apr-01 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.211 (still bad) 2010-Apr-01 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.209 (still bad) 2010-Apr-01 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.213 (still bad) 2010-Apr-01 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.212 (still bad) 2010-Apr-01 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.214 (still bad) 2010-Apr-01 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.210 (still bad) 2010-Apr-01 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.210 (still bad) 2010-Apr-01 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.212 (still bad) 2010-Apr-01 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.209 (still bad) 2010-Apr-01 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.211 (still bad) 2010-Apr-01 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:32:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.400 < 0.75)! 2010-Apr-01 01:32:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.209 1.050 1.022 2010-Apr-01 01:32:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.400 1.177 1.171 1.007 2010-Apr-01 01:32:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.174 0.913 1.203 1.023 2010-Apr-01 01:32:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.928 1.065 1.078 2010-Apr-01 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.210 (still bad) 2010-Apr-01 01:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.215 (still bad) 2010-Apr-01 01:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.211 (still bad) 2010-Apr-01 01:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.216 (still bad) 2010-Apr-01 01:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.211 (still bad) 2010-Apr-01 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.208 (still bad) 2010-Apr-01 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.211 (still bad) 2010-Apr-01 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.216 (still bad) 2010-Apr-01 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.209 (still bad) 2010-Apr-01 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.209 (still bad) 2010-Apr-01 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.207 (still bad) 2010-Apr-01 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.210 (still bad) 2010-Apr-01 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.206 (still bad) 2010-Apr-01 01:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.209 (still bad) 2010-Apr-01 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.206 (still bad) 2010-Apr-01 01:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.208 (still bad) 2010-Apr-01 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.212 (still bad) 2010-Apr-01 01:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.208 (still bad) 2010-Apr-01 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.212 (still bad) 2010-Apr-01 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.212 (still bad) 2010-Apr-01 01:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.213 (still bad) 2010-Apr-01 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.216 (still bad) 2010-Apr-01 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:33:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.406 < 0.75)! 2010-Apr-01 01:33:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.215 1.047 1.018 2010-Apr-01 01:33:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.406 1.174 1.171 1.007 2010-Apr-01 01:33:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.914 1.203 1.021 2010-Apr-01 01:33:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.925 1.066 1.074 2010-Apr-01 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.216 (still bad) 2010-Apr-01 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.214 (still bad) 2010-Apr-01 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.215 (still bad) 2010-Apr-01 01:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.214 (still bad) 2010-Apr-01 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.211 (still bad) 2010-Apr-01 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.211 (still bad) 2010-Apr-01 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.459 and 1.210 (still bad) 2010-Apr-01 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.210 (still bad) 2010-Apr-01 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.211 (still bad) 2010-Apr-01 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.495 and 1.209 (still bad) 2010-Apr-01 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.443 and 1.211 (still bad) 2010-Apr-01 01:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.208 (still bad) 2010-Apr-01 01:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.213 (still bad) 2010-Apr-01 01:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.214 (still bad) 2010-Apr-01 01:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.211 (still bad) 2010-Apr-01 01:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.482 and 1.211 (still bad) 2010-Apr-01 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.498 and 1.215 (still bad) 2010-Apr-01 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.212 (still bad) 2010-Apr-01 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.453 and 1.212 (still bad) 2010-Apr-01 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.212 (still bad) 2010-Apr-01 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.437 and 1.211 (still bad) 2010-Apr-01 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.211 (still bad) 2010-Apr-01 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.212 (still bad) 2010-Apr-01 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.210 (still bad) 2010-Apr-01 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.215 (still bad) 2010-Apr-01 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.213 (still bad) 2010-Apr-01 01:34:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.396 < 0.75)! 2010-Apr-01 01:34:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.211 1.047 1.018 2010-Apr-01 01:34:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.396 1.174 1.177 1.011 2010-Apr-01 01:34:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.172 0.911 1.206 1.024 2010-Apr-01 01:34:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.927 1.068 1.077 2010-Apr-01 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.211 (still bad) 2010-Apr-01 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.209 (still bad) 2010-Apr-01 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.211 (still bad) 2010-Apr-01 01:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.430 and 1.215 (still bad) 2010-Apr-01 01:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.209 (still bad) 2010-Apr-01 01:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.212 (still bad) 2010-Apr-01 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.217 (still bad) 2010-Apr-01 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.227 (still bad) 2010-Apr-01 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.219 (still bad) 2010-Apr-01 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.220 (still bad) 2010-Apr-01 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.213 (still bad) 2010-Apr-01 01:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.212 (still bad) 2010-Apr-01 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.218 (still bad) 2010-Apr-01 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.208 (still bad) 2010-Apr-01 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.211 (still bad) 2010-Apr-01 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.214 (still bad) 2010-Apr-01 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.213 (still bad) 2010-Apr-01 01:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.216 (still bad) 2010-Apr-01 01:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.228 (still bad) 2010-Apr-01 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.222 (still bad) 2010-Apr-01 01:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.222 (still bad) 2010-Apr-01 01:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.226 (still bad) 2010-Apr-01 01:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.220 (still bad) 2010-Apr-01 01:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.221 (still bad) 2010-Apr-01 01:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.225 (still bad) 2010-Apr-01 01:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.217 (still bad) 2010-Apr-01 01:35:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.394 < 0.75)! 2010-Apr-01 01:35:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.212 1.047 1.016 2010-Apr-01 01:35:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.394 1.172 1.167 1.009 2010-Apr-01 01:35:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.172 0.909 1.206 1.026 2010-Apr-01 01:35:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.923 1.067 1.073 2010-Apr-01 01:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.215 (still bad) 2010-Apr-01 01:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.209 (still bad) 2010-Apr-01 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.211 (still bad) 2010-Apr-01 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.218 (still bad) 2010-Apr-01 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.211 (still bad) 2010-Apr-01 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.209 (still bad) 2010-Apr-01 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.209 (still bad) 2010-Apr-01 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.211 (still bad) 2010-Apr-01 01:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.217 (still bad) 2010-Apr-01 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.209 (still bad) 2010-Apr-01 01:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.212 (still bad) 2010-Apr-01 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.209 (still bad) 2010-Apr-01 01:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.208 (still bad) 2010-Apr-01 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.217 (still bad) 2010-Apr-01 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.208 (still bad) 2010-Apr-01 01:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.212 (still bad) 2010-Apr-01 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.209 (still bad) 2010-Apr-01 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.210 (still bad) 2010-Apr-01 01:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.219 (still bad) 2010-Apr-01 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.213 (still bad) 2010-Apr-01 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.211 (still bad) 2010-Apr-01 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.210 (still bad) 2010-Apr-01 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.214 (still bad) 2010-Apr-01 01:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.217 (still bad) 2010-Apr-01 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.216 (still bad) 2010-Apr-01 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.215 (still bad) 2010-Apr-01 01:36:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.396 < 0.75)! 2010-Apr-01 01:36:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.218 1.049 1.020 2010-Apr-01 01:36:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.396 1.178 1.179 1.019 2010-Apr-01 01:36:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.174 0.911 1.201 1.024 2010-Apr-01 01:36:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.927 1.068 1.076 2010-Apr-01 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.215 (still bad) 2010-Apr-01 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.214 (still bad) 2010-Apr-01 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.213 (still bad) 2010-Apr-01 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.215 (still bad) 2010-Apr-01 01:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.212 (still bad) 2010-Apr-01 01:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.213 (still bad) 2010-Apr-01 01:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.212 (still bad) 2010-Apr-01 01:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.211 (still bad) 2010-Apr-01 01:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.213 (still bad) 2010-Apr-01 01:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.214 (still bad) 2010-Apr-01 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.214 (still bad) 2010-Apr-01 01:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.212 (still bad) 2010-Apr-01 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.215 (still bad) 2010-Apr-01 01:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.211 (still bad) 2010-Apr-01 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.216 (still bad) 2010-Apr-01 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.216 (still bad) 2010-Apr-01 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.218 (still bad) 2010-Apr-01 01:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.222 (still bad) 2010-Apr-01 01:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.229 (still bad) 2010-Apr-01 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.228 (still bad) 2010-Apr-01 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.229 (still bad) 2010-Apr-01 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.229 (still bad) 2010-Apr-01 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.229 (still bad) 2010-Apr-01 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.225 (still bad) 2010-Apr-01 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.226 (still bad) 2010-Apr-01 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.217 (still bad) 2010-Apr-01 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.215 (still bad) 2010-Apr-01 01:37:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.394 < 0.75)! 2010-Apr-01 01:37:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.215 1.049 1.020 2010-Apr-01 01:37:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.394 1.175 1.173 1.013 2010-Apr-01 01:37:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.912 1.208 1.032 2010-Apr-01 01:37:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.930 1.067 1.081 2010-Apr-01 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.220 (still bad) 2010-Apr-01 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.223 (still bad) 2010-Apr-01 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.227 (still bad) 2010-Apr-01 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.232 (still bad) 2010-Apr-01 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.228 (still bad) 2010-Apr-01 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.229 (still bad) 2010-Apr-01 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.226 (still bad) 2010-Apr-01 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.223 (still bad) 2010-Apr-01 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.214 (still bad) 2010-Apr-01 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.214 (still bad) 2010-Apr-01 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.213 (still bad) 2010-Apr-01 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.212 (still bad) 2010-Apr-01 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.217 (still bad) 2010-Apr-01 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.211 (still bad) 2010-Apr-01 01:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.212 (still bad) 2010-Apr-01 01:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.210 (still bad) 2010-Apr-01 01:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.213 (still bad) 2010-Apr-01 01:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.220 (still bad) 2010-Apr-01 01:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.219 (still bad) 2010-Apr-01 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.210 (still bad) 2010-Apr-01 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.215 (still bad) 2010-Apr-01 01:38:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.402 < 0.75)! 2010-Apr-01 01:38:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.211 1.049 1.019 2010-Apr-01 01:38:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.402 1.174 1.171 1.008 2010-Apr-01 01:38:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.172 0.912 1.201 1.024 2010-Apr-01 01:38:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.930 1.069 1.078 2010-Apr-01 01:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.211 (still bad) 2010-Apr-01 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.217 (still bad) 2010-Apr-01 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.210 (still bad) 2010-Apr-01 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.209 (still bad) 2010-Apr-01 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.219 (still bad) 2010-Apr-01 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.211 (still bad) 2010-Apr-01 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.213 (still bad) 2010-Apr-01 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.210 (still bad) 2010-Apr-01 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.209 (still bad) 2010-Apr-01 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.218 (still bad) 2010-Apr-01 01:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.209 (still bad) 2010-Apr-01 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.209 (still bad) 2010-Apr-01 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.211 (still bad) 2010-Apr-01 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.204 (still bad) 2010-Apr-01 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.205 (still bad) 2010-Apr-01 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.215 (still bad) 2010-Apr-01 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.208 (still bad) 2010-Apr-01 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.209 (still bad) 2010-Apr-01 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.212 (still bad) 2010-Apr-01 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.211 (still bad) 2010-Apr-01 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.215 (still bad) 2010-Apr-01 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.220 (still bad) 2010-Apr-01 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.214 (still bad) 2010-Apr-01 01:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.215 (still bad) 2010-Apr-01 01:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.219 (still bad) 2010-Apr-01 01:39:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.394 < 0.75)! 2010-Apr-01 01:39:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.213 1.046 1.019 2010-Apr-01 01:39:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.394 1.174 1.169 1.007 2010-Apr-01 01:39:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.173 0.910 1.205 1.022 2010-Apr-01 01:39:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.927 1.069 1.075 2010-Apr-01 01:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.217 (still bad) 2010-Apr-01 01:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.221 (still bad) 2010-Apr-01 01:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.212 (still bad) 2010-Apr-01 01:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.210 (still bad) 2010-Apr-01 01:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.211 (still bad) 2010-Apr-01 01:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.211 (still bad) 2010-Apr-01 01:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.211 (still bad) 2010-Apr-01 01:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.213 (still bad) 2010-Apr-01 01:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.213 (still bad) 2010-Apr-01 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.210 (still bad) 2010-Apr-01 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.212 (still bad) 2010-Apr-01 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.210 (still bad) 2010-Apr-01 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.211 (still bad) 2010-Apr-01 01:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.210 (still bad) 2010-Apr-01 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.211 (still bad) 2010-Apr-01 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.212 (still bad) 2010-Apr-01 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.214 (still bad) 2010-Apr-01 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.481 and 1.211 (still bad) 2010-Apr-01 01:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.476 and 1.211 (still bad) 2010-Apr-01 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.487 and 1.212 (still bad) 2010-Apr-01 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.212 (still bad) 2010-Apr-01 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.485 and 1.213 (still bad) 2010-Apr-01 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.466 and 1.212 (still bad) 2010-Apr-01 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.479 and 1.214 (still bad) 2010-Apr-01 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.215 (still bad) 2010-Apr-01 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.215 (still bad) 2010-Apr-01 01:40:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.451 < 0.75)! 2010-Apr-01 01:40:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.214 1.047 1.019 2010-Apr-01 01:40:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.451 1.196 1.171 1.013 2010-Apr-01 01:40:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.914 1.205 1.026 2010-Apr-01 01:40:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.929 1.066 1.079 2010-Apr-01 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.217 (still bad) 2010-Apr-01 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.215 (still bad) 2010-Apr-01 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.435 and 1.215 (still bad) 2010-Apr-01 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.421 and 1.218 (still bad) 2010-Apr-01 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.219 (still bad) 2010-Apr-01 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.416 and 1.223 (still bad) 2010-Apr-01 01:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.228 (still bad) 2010-Apr-01 01:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.232 (still bad) 2010-Apr-01 01:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.425 and 1.233 (still bad) 2010-Apr-01 01:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.236 (still bad) 2010-Apr-01 01:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.239 (still bad) 2010-Apr-01 01:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.239 (still bad) 2010-Apr-01 01:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.244 (still bad) 2010-Apr-01 01:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.246 (still bad) 2010-Apr-01 01:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.244 (still bad) 2010-Apr-01 01:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.246 (still bad) 2010-Apr-01 01:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.246 (still bad) 2010-Apr-01 01:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.245 (still bad) 2010-Apr-01 01:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.243 (still bad) 2010-Apr-01 01:40:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:40:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:40:50 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:40:50 LOG5 end_task: Level: (2) ID = <10449> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 LOG1 fixed_driftmap: New position: year = 2010.2493361345605 RA = 14:18:26.8 RA/Dec = 14:18:57.8 +19:17:36.1 2010-Apr-01 01:40:50 NOTE fixed_driftmap: Correcting ZA to 6:30:59.1 ... 2010-Apr-01 01:40:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5164116460 -CF 2010-Apr-01 01:40:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:40:50 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:40:50 LOG5 begin_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:40:50 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:40:50 LOG5 begin_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:40:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:40:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:40:50 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:40:50 LOG5 begin_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5164116460 -CF 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:40:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:40:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:40:50 LOG5 end_task: Level: (4) ID = <10453> Status = 0 0 0 0 ok 2010-Apr-01 01:40:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:40:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:40:50 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:40:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:40:50 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:40:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:40:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:40:51 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:40:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:40:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:40:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:40:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:40:51 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:40:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:40:51 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:40:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:40:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:40:51 LOG5 end_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:40:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:40:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:40:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:40:51 LOG5 begin_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:40:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:40:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:40:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:40:51 LOG5 end_task: Level: (3) ID = <10456> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:40:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:40:51 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:40:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:40:51 INFO2 take_data: Starting WAPP 1-second scan: 9100020 2010-Apr-01 01:40:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:40:51 LOG5 begin_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2010-Apr-01 01:40:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:40:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:40:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20452.00 2010-Apr-01 01:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.237 (still bad) 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:40:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:40:53 LOG5 end_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:40:53 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:40:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:40:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:40:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:40:53 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:40:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:40:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:40:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:40:53 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:40:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:40:53 LOG5 finish_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:40:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:40:53 LOG5 end_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2010-Apr-01 01:40:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 39 of 99 2010-Apr-01 01:40:53 LOG4 send_obs_status: To obs_status: <1> LOOP 39 2010-Apr-01 01:40:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:40:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:40:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:40:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:40:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:40:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:40:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:40:54 LOG5 begin_task: Level: (2) ID = <10460> Status = 0 0 0 0 ok 2010-Apr-01 01:40:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:40:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:40:54 INFO2 take_data: Starting WAPP 600-second scan: 9100021 2010-Apr-01 01:40:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:40:54 LOG5 begin_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2010-Apr-01 01:40:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:40:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:40:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.675 (still bad) 2010-Apr-01 01:40:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20455.00 2010-Apr-01 01:40:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0010.fits 2010-Apr-01 01:40:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0010.fits} 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.675 (still bad) 2010-Apr-01 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.218 (still bad) 2010-Apr-01 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.229 (still bad) 2010-Apr-01 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.230 (still bad) 2010-Apr-01 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.234 (still bad) 2010-Apr-01 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.242 (still bad) 2010-Apr-01 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.433 and 1.241 (still bad) 2010-Apr-01 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.243 (still bad) 2010-Apr-01 01:41:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.410 < 0.75)! 2010-Apr-01 01:41:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.223 1.055 1.024 2010-Apr-01 01:41:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.410 1.180 1.178 1.014 2010-Apr-01 01:41:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.183 0.919 1.246 1.062 2010-Apr-01 01:41:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.937 1.076 1.089 2010-Apr-01 01:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.230 (still bad) 2010-Apr-01 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.225 (still bad) 2010-Apr-01 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.221 (still bad) 2010-Apr-01 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.417 and 1.211 (still bad) 2010-Apr-01 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.222 (still bad) 2010-Apr-01 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.212 (still bad) 2010-Apr-01 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.214 (still bad) 2010-Apr-01 01:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.211 (still bad) 2010-Apr-01 01:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.219 (still bad) 2010-Apr-01 01:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.211 (still bad) 2010-Apr-01 01:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.215 (still bad) 2010-Apr-01 01:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.210 (still bad) 2010-Apr-01 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.212 (still bad) 2010-Apr-01 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.221 (still bad) 2010-Apr-01 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.213 (still bad) 2010-Apr-01 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.214 (still bad) 2010-Apr-01 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.214 (still bad) 2010-Apr-01 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.222 (still bad) 2010-Apr-01 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.638 and 1.213 (still bad) 2010-Apr-01 01:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.612 and 1.214 (still bad) 2010-Apr-01 01:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.598 and 1.217 (still bad) 2010-Apr-01 01:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.574 and 1.212 (still bad) 2010-Apr-01 01:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.560 and 1.214 (still bad) 2010-Apr-01 01:42:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.556 < 0.75)! 2010-Apr-01 01:42:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.220 1.055 1.024 2010-Apr-01 01:42:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.556 1.183 1.179 1.015 2010-Apr-01 01:42:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.914 1.206 1.024 2010-Apr-01 01:42:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.933 1.072 1.085 2010-Apr-01 01:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.210 (still bad) 2010-Apr-01 01:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.543 and 1.212 (still bad) 2010-Apr-01 01:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.216 (still bad) 2010-Apr-01 01:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.514 and 1.213 (still bad) 2010-Apr-01 01:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.212 (still bad) 2010-Apr-01 01:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.463 and 1.221 (still bad) 2010-Apr-01 01:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.209 (still bad) 2010-Apr-01 01:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.215 (still bad) 2010-Apr-01 01:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.521 and 1.212 (still bad) 2010-Apr-01 01:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.640 and 1.210 (still bad) 2010-Apr-01 01:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.477 and 1.219 (still bad) 2010-Apr-01 01:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.465 and 1.212 (still bad) 2010-Apr-01 01:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.424 and 1.213 (still bad) 2010-Apr-01 01:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.214 (still bad) 2010-Apr-01 01:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.213 (still bad) 2010-Apr-01 01:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.213 (still bad) 2010-Apr-01 01:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.214 (still bad) 2010-Apr-01 01:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.212 (still bad) 2010-Apr-01 01:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.213 (still bad) 2010-Apr-01 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.214 (still bad) 2010-Apr-01 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.214 (still bad) 2010-Apr-01 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.216 (still bad) 2010-Apr-01 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.215 (still bad) 2010-Apr-01 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.213 (still bad) 2010-Apr-01 01:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.215 (still bad) 2010-Apr-01 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.212 (still bad) 2010-Apr-01 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.215 (still bad) 2010-Apr-01 01:43:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.408 < 0.75)! 2010-Apr-01 01:43:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.217 1.050 1.019 2010-Apr-01 01:43:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.408 1.179 1.171 1.011 2010-Apr-01 01:43:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.180 0.914 1.204 1.025 2010-Apr-01 01:43:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.925 1.070 1.074 2010-Apr-01 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.214 (still bad) 2010-Apr-01 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.448 and 1.218 (still bad) 2010-Apr-01 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.219 (still bad) 2010-Apr-01 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.221 (still bad) 2010-Apr-01 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.219 (still bad) 2010-Apr-01 01:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.216 (still bad) 2010-Apr-01 01:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.218 (still bad) 2010-Apr-01 01:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.216 (still bad) 2010-Apr-01 01:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.217 (still bad) 2010-Apr-01 01:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.220 (still bad) 2010-Apr-01 01:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.217 (still bad) 2010-Apr-01 01:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.216 (still bad) 2010-Apr-01 01:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.219 (still bad) 2010-Apr-01 01:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.216 (still bad) 2010-Apr-01 01:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.214 (still bad) 2010-Apr-01 01:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.218 (still bad) 2010-Apr-01 01:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.215 (still bad) 2010-Apr-01 01:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.213 (still bad) 2010-Apr-01 01:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.213 (still bad) 2010-Apr-01 01:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.214 (still bad) 2010-Apr-01 01:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.220 (still bad) 2010-Apr-01 01:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.215 (still bad) 2010-Apr-01 01:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.217 (still bad) 2010-Apr-01 01:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.213 (still bad) 2010-Apr-01 01:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.219 (still bad) 2010-Apr-01 01:44:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.399 < 0.75)! 2010-Apr-01 01:44:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.212 1.049 1.016 2010-Apr-01 01:44:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.399 1.173 1.174 1.009 2010-Apr-01 01:44:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.914 1.205 1.024 2010-Apr-01 01:44:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.925 1.068 1.074 2010-Apr-01 01:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.213 (still bad) 2010-Apr-01 01:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.211 (still bad) 2010-Apr-01 01:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.210 (still bad) 2010-Apr-01 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.216 (still bad) 2010-Apr-01 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.215 (still bad) 2010-Apr-01 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.211 (still bad) 2010-Apr-01 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.217 (still bad) 2010-Apr-01 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.212 (still bad) 2010-Apr-01 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.211 (still bad) 2010-Apr-01 01:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.219 (still bad) 2010-Apr-01 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.210 (still bad) 2010-Apr-01 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.210 (still bad) 2010-Apr-01 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.211 (still bad) 2010-Apr-01 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.211 (still bad) 2010-Apr-01 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.217 (still bad) 2010-Apr-01 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.213 (still bad) 2010-Apr-01 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.209 (still bad) 2010-Apr-01 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.215 (still bad) 2010-Apr-01 01:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.211 (still bad) 2010-Apr-01 01:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.214 (still bad) 2010-Apr-01 01:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.219 (still bad) 2010-Apr-01 01:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.211 (still bad) 2010-Apr-01 01:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.209 (still bad) 2010-Apr-01 01:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.210 (still bad) 2010-Apr-01 01:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.220 (still bad) 2010-Apr-01 01:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.212 (still bad) 2010-Apr-01 01:45:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.403 < 0.75)! 2010-Apr-01 01:45:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.210 1.046 1.014 2010-Apr-01 01:45:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.403 1.172 1.175 1.012 2010-Apr-01 01:45:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.192 0.925 1.203 1.024 2010-Apr-01 01:45:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.927 1.070 1.076 2010-Apr-01 01:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.215 (still bad) 2010-Apr-01 01:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.210 (still bad) 2010-Apr-01 01:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.218 (still bad) 2010-Apr-01 01:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.214 (still bad) 2010-Apr-01 01:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.210 (still bad) 2010-Apr-01 01:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.215 (still bad) 2010-Apr-01 01:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.212 (still bad) 2010-Apr-01 01:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.219 (still bad) 2010-Apr-01 01:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.209 (still bad) 2010-Apr-01 01:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.209 (still bad) 2010-Apr-01 01:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.213 (still bad) 2010-Apr-01 01:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.213 (still bad) 2010-Apr-01 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.213 (still bad) 2010-Apr-01 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.219 (still bad) 2010-Apr-01 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.213 (still bad) 2010-Apr-01 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.210 (still bad) 2010-Apr-01 01:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.216 (still bad) 2010-Apr-01 01:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.210 (still bad) 2010-Apr-01 01:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.212 (still bad) 2010-Apr-01 01:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.213 (still bad) 2010-Apr-01 01:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.211 (still bad) 2010-Apr-01 01:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.210 (still bad) 2010-Apr-01 01:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.211 (still bad) 2010-Apr-01 01:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.213 (still bad) 2010-Apr-01 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.211 (still bad) 2010-Apr-01 01:46:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.404 < 0.75)! 2010-Apr-01 01:46:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.210 1.050 1.015 2010-Apr-01 01:46:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.404 1.173 1.179 1.012 2010-Apr-01 01:46:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.912 1.203 1.024 2010-Apr-01 01:46:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.927 1.067 1.076 2010-Apr-01 01:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.212 (still bad) 2010-Apr-01 01:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.210 (still bad) 2010-Apr-01 01:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.212 (still bad) 2010-Apr-01 01:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.214 (still bad) 2010-Apr-01 01:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.213 (still bad) 2010-Apr-01 01:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.213 (still bad) 2010-Apr-01 01:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.211 (still bad) 2010-Apr-01 01:46:34 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:46:34.299 (seconds: 6394.299)!} 2010-Apr-01 01:46:34 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:46:34.299 (seconds: 6394.299)! 2010-Apr-01 01:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.212 (still bad) 2010-Apr-01 01:46:35 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 6393.0 to 6394.0! 2010-Apr-01 01:46:36 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (6393.0 - 6395.0)! 2010-Apr-01 01:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.212 (still bad) 2010-Apr-01 01:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.213 (still bad) 2010-Apr-01 01:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.211 (still bad) 2010-Apr-01 01:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.213 (still bad) 2010-Apr-01 01:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.215 (still bad) 2010-Apr-01 01:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.216 (still bad) 2010-Apr-01 01:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.212 (still bad) 2010-Apr-01 01:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.216 (still bad) 2010-Apr-01 01:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.214 (still bad) 2010-Apr-01 01:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.412 and 1.216 (still bad) 2010-Apr-01 01:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.213 (still bad) 2010-Apr-01 01:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.213 (still bad) 2010-Apr-01 01:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.210 (still bad) 2010-Apr-01 01:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.210 (still bad) 2010-Apr-01 01:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.211 (still bad) 2010-Apr-01 01:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.210 (still bad) 2010-Apr-01 01:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.210 (still bad) 2010-Apr-01 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.211 (still bad) 2010-Apr-01 01:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.208 (still bad) 2010-Apr-01 01:47:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.404 < 0.75)! 2010-Apr-01 01:47:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.208 1.051 1.013 2010-Apr-01 01:47:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.404 1.170 1.176 1.009 2010-Apr-01 01:47:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.910 1.208 1.027 2010-Apr-01 01:47:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.925 1.070 1.074 2010-Apr-01 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.210 (still bad) 2010-Apr-01 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.208 (still bad) 2010-Apr-01 01:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.209 (still bad) 2010-Apr-01 01:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.213 (still bad) 2010-Apr-01 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.209 (still bad) 2010-Apr-01 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.209 (still bad) 2010-Apr-01 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.212 (still bad) 2010-Apr-01 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.208 (still bad) 2010-Apr-01 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.211 (still bad) 2010-Apr-01 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.209 (still bad) 2010-Apr-01 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.208 (still bad) 2010-Apr-01 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.210 (still bad) 2010-Apr-01 01:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.206 (still bad) 2010-Apr-01 01:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.210 (still bad) 2010-Apr-01 01:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.214 (still bad) 2010-Apr-01 01:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.210 (still bad) 2010-Apr-01 01:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.212 (still bad) 2010-Apr-01 01:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.213 (still bad) 2010-Apr-01 01:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.212 (still bad) 2010-Apr-01 01:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.216 (still bad) 2010-Apr-01 01:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.215 (still bad) 2010-Apr-01 01:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.209 (still bad) 2010-Apr-01 01:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.415 and 1.211 (still bad) 2010-Apr-01 01:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.208 (still bad) 2010-Apr-01 01:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.209 (still bad) 2010-Apr-01 01:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.213 (still bad) 2010-Apr-01 01:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.211 (still bad) 2010-Apr-01 01:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.212 (still bad) 2010-Apr-01 01:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.212 (still bad) 2010-Apr-01 01:48:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.397 < 0.75)! 2010-Apr-01 01:48:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.208 1.052 1.015 2010-Apr-01 01:48:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.397 1.170 1.172 1.007 2010-Apr-01 01:48:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.179 0.911 1.213 1.026 2010-Apr-01 01:48:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.922 1.071 1.070 2010-Apr-01 01:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.215 (still bad) 2010-Apr-01 01:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.216 (still bad) 2010-Apr-01 01:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.208 (still bad) 2010-Apr-01 01:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.212 (still bad) 2010-Apr-01 01:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.207 (still bad) 2010-Apr-01 01:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.209 (still bad) 2010-Apr-01 01:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.212 (still bad) 2010-Apr-01 01:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.214 (still bad) 2010-Apr-01 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.211 (still bad) 2010-Apr-01 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.212 (still bad) 2010-Apr-01 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.209 (still bad) 2010-Apr-01 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.211 (still bad) 2010-Apr-01 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.216 (still bad) 2010-Apr-01 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.210 (still bad) 2010-Apr-01 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.210 (still bad) 2010-Apr-01 01:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.213 (still bad) 2010-Apr-01 01:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.209 (still bad) 2010-Apr-01 01:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.211 (still bad) 2010-Apr-01 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.216 (still bad) 2010-Apr-01 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.214 (still bad) 2010-Apr-01 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.209 (still bad) 2010-Apr-01 01:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.211 (still bad) 2010-Apr-01 01:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.211 (still bad) 2010-Apr-01 01:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.211 (still bad) 2010-Apr-01 01:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.213 (still bad) 2010-Apr-01 01:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.212 (still bad) 2010-Apr-01 01:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.212 (still bad) 2010-Apr-01 01:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.214 (still bad) 2010-Apr-01 01:49:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.387 < 0.75)! 2010-Apr-01 01:49:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.212 1.052 1.017 2010-Apr-01 01:49:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.387 1.170 1.175 1.009 2010-Apr-01 01:49:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.177 0.911 1.209 1.021 2010-Apr-01 01:49:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.921 1.073 1.070 2010-Apr-01 01:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.210 (still bad) 2010-Apr-01 01:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.218 (still bad) 2010-Apr-01 01:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.211 (still bad) 2010-Apr-01 01:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.209 (still bad) 2010-Apr-01 01:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.213 (still bad) 2010-Apr-01 01:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.209 (still bad) 2010-Apr-01 01:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.211 (still bad) 2010-Apr-01 01:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.220 (still bad) 2010-Apr-01 01:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.212 (still bad) 2010-Apr-01 01:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.210 (still bad) 2010-Apr-01 01:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.214 (still bad) 2010-Apr-01 01:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.211 (still bad) 2010-Apr-01 01:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.214 (still bad) 2010-Apr-01 01:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.221 (still bad) 2010-Apr-01 01:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.215 (still bad) 2010-Apr-01 01:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.212 (still bad) 2010-Apr-01 01:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.216 (still bad) 2010-Apr-01 01:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.215 (still bad) 2010-Apr-01 01:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.215 (still bad) 2010-Apr-01 01:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.223 (still bad) 2010-Apr-01 01:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.216 (still bad) 2010-Apr-01 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.217 (still bad) 2010-Apr-01 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.217 (still bad) 2010-Apr-01 01:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 01:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.216 (still bad) 2010-Apr-01 01:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.222 (still bad) 2010-Apr-01 01:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.216 (still bad) 2010-Apr-01 01:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.214 (still bad) 2010-Apr-01 01:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 01:50:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.386 < 0.75)! 2010-Apr-01 01:50:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.213 1.050 1.018 2010-Apr-01 01:50:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.386 1.177 1.173 1.010 2010-Apr-01 01:50:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.176 0.914 1.209 1.022 2010-Apr-01 01:50:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.926 1.070 1.076 2010-Apr-01 01:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.213 (still bad) 2010-Apr-01 01:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.223 (still bad) 2010-Apr-01 01:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.217 (still bad) 2010-Apr-01 01:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.213 (still bad) 2010-Apr-01 01:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.217 (still bad) 2010-Apr-01 01:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.214 (still bad) 2010-Apr-01 01:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.217 (still bad) 2010-Apr-01 01:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.225 (still bad) 2010-Apr-01 01:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.218 (still bad) 2010-Apr-01 01:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.217 (still bad) 2010-Apr-01 01:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.221 (still bad) 2010-Apr-01 01:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.218 (still bad) 2010-Apr-01 01:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.220 (still bad) 2010-Apr-01 01:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.226 (still bad) 2010-Apr-01 01:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.221 (still bad) 2010-Apr-01 01:50:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:50:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:50:55 LOG5 end_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:50:55 LOG5 end_task: Level: (2) ID = <10460> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG1 fixed_driftmap: New position: year = 2010.2493553058534 RA = 14:28:36.3 RA/Dec = 14:29:07.1 +19:17:41.3 2010-Apr-01 01:50:55 NOTE fixed_driftmap: Correcting ZA to 6:31:40.2 ... 2010-Apr-01 01:50:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5278393190 -CF 2010-Apr-01 01:50:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 01:50:55 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 01:50:55 LOG5 begin_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 01:50:55 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 01:50:55 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 01:50:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 01:50:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:50:55 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 01:50:55 LOG5 begin_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5278393190 -CF 2010-Apr-01 01:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.216 (still bad) 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 01:50:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 01:50:55 LOG5 end_task: Level: (4) ID = <10464> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 01:50:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:50:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 01:50:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:50:55 LOG5 begin_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2010-Apr-01 01:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 01:50:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:50:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:50:56 LOG5 end_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:50:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 01:50:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 01:50:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:50:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 01:50:56 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 01:50:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 01:50:56 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 01:50:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 01:50:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 01:50:56 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 01:50:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 01:50:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 01:50:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:50:56 LOG5 begin_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:50:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 01:50:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:50:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:50:56 LOG5 end_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 01:50:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:50:56 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 01:50:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:50:56 INFO2 take_data: Starting WAPP 1-second scan: 9100022 2010-Apr-01 01:50:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:50:56 LOG5 begin_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-Apr-01 01:50:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:50:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 01:50:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21057.00 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:50:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 01:50:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 01:50:58 LOG5 end_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-Apr-01 01:50:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 01:50:58 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-Apr-01 01:50:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 01:50:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 01:50:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 01:50:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 01:50:58 LOG5 begin_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2010-Apr-01 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.504 and 1.644 (still bad) 2010-Apr-01 01:50:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 01:50:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 01:50:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 01:50:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 01:50:59 LOG5 end_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 01:50:59 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 01:50:59 LOG5 finish_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2010-Apr-01 01:50:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 01:50:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 01:50:59 LOG5 end_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2010-Apr-01 01:50:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 40 of 99 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <1> LOOP 40 2010-Apr-01 01:50:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:50:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:50:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:50:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 01:50:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 01:50:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 01:50:59 LOG5 begin_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 01:50:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 01:50:59 INFO2 take_data: Starting WAPP 600-second scan: 9100023 2010-Apr-01 01:50:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 01:50:59 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-Apr-01 01:50:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 01:50:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 01:50:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21060.00 2010-Apr-01 01:50:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0011.fits 2010-Apr-01 01:50:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0011.fits} 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 01:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.215 (still bad) 2010-Apr-01 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.217 (still bad) 2010-Apr-01 01:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.216 (still bad) 2010-Apr-01 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.219 (still bad) 2010-Apr-01 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 01:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.217 (still bad) 2010-Apr-01 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.223 (still bad) 2010-Apr-01 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.216 (still bad) 2010-Apr-01 01:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.217 (still bad) 2010-Apr-01 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.217 (still bad) 2010-Apr-01 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.213 (still bad) 2010-Apr-01 01:51:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.389 < 0.75)! 2010-Apr-01 01:51:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.213 1.052 1.018 2010-Apr-01 01:51:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.389 1.179 1.175 1.013 2010-Apr-01 01:51:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.915 1.212 1.027 2010-Apr-01 01:51:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.926 1.070 1.075 2010-Apr-01 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.224 (still bad) 2010-Apr-01 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.216 (still bad) 2010-Apr-01 01:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.214 (still bad) 2010-Apr-01 01:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.217 (still bad) 2010-Apr-01 01:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.214 (still bad) 2010-Apr-01 01:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.216 (still bad) 2010-Apr-01 01:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.225 (still bad) 2010-Apr-01 01:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.216 (still bad) 2010-Apr-01 01:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.218 (still bad) 2010-Apr-01 01:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.218 (still bad) 2010-Apr-01 01:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.218 (still bad) 2010-Apr-01 01:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.217 (still bad) 2010-Apr-01 01:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.226 (still bad) 2010-Apr-01 01:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.218 (still bad) 2010-Apr-01 01:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.216 (still bad) 2010-Apr-01 01:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.218 (still bad) 2010-Apr-01 01:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.215 (still bad) 2010-Apr-01 01:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.220 (still bad) 2010-Apr-01 01:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.227 (still bad) 2010-Apr-01 01:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.219 (still bad) 2010-Apr-01 01:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.217 (still bad) 2010-Apr-01 01:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.220 (still bad) 2010-Apr-01 01:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.218 (still bad) 2010-Apr-01 01:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.217 (still bad) 2010-Apr-01 01:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.225 (still bad) 2010-Apr-01 01:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.219 (still bad) 2010-Apr-01 01:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.442 and 1.216 (still bad) 2010-Apr-01 01:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.636 and 1.219 (still bad) 2010-Apr-01 01:52:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.761 and 1.215 2010-Apr-01 01:52:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.721 < 0.75)! 2010-Apr-01 01:52:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.213 1.055 1.016 2010-Apr-01 01:52:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.721 1.175 1.175 1.011 2010-Apr-01 01:52:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.177 0.917 1.207 1.032 2010-Apr-01 01:52:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.923 1.072 1.073 2010-Apr-01 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.712 and 1.218 (still bad) 2010-Apr-01 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.700 and 1.215 (still bad) 2010-Apr-01 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.723 and 1.216 (still bad) 2010-Apr-01 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.699 and 1.220 (still bad) 2010-Apr-01 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.708 and 1.219 (still bad) 2010-Apr-01 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.705 and 1.213 (still bad) 2010-Apr-01 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.697 and 1.215 (still bad) 2010-Apr-01 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.701 and 1.215 (still bad) 2010-Apr-01 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.683 and 1.218 (still bad) 2010-Apr-01 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.698 and 1.219 (still bad) 2010-Apr-01 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.216 (still bad) 2010-Apr-01 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.684 and 1.215 (still bad) 2010-Apr-01 01:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.218 (still bad) 2010-Apr-01 01:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.689 and 1.216 (still bad) 2010-Apr-01 01:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.687 and 1.216 (still bad) 2010-Apr-01 01:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.662 and 1.218 (still bad) 2010-Apr-01 01:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.604 and 1.215 (still bad) 2010-Apr-01 01:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.572 and 1.215 (still bad) 2010-Apr-01 01:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.564 and 1.216 (still bad) 2010-Apr-01 01:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.538 and 1.214 (still bad) 2010-Apr-01 01:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.528 and 1.214 (still bad) 2010-Apr-01 01:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.529 and 1.219 (still bad) 2010-Apr-01 01:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.531 and 1.218 (still bad) 2010-Apr-01 01:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.214 (still bad) 2010-Apr-01 01:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.216 (still bad) 2010-Apr-01 01:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.502 and 1.216 (still bad) 2010-Apr-01 01:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.524 and 1.215 (still bad) 2010-Apr-01 01:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.547 and 1.221 (still bad) 2010-Apr-01 01:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.470 and 1.216 (still bad) 2010-Apr-01 01:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.464 and 1.214 (still bad) 2010-Apr-01 01:53:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.482 < 0.75)! 2010-Apr-01 01:53:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.216 1.058 1.018 2010-Apr-01 01:53:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.482 1.174 1.182 1.011 2010-Apr-01 01:53:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.183 0.916 1.215 1.029 2010-Apr-01 01:53:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.923 1.076 1.073 2010-Apr-01 01:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.472 and 1.213 (still bad) 2010-Apr-01 01:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.447 and 1.215 (still bad) 2010-Apr-01 01:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.478 and 1.221 (still bad) 2010-Apr-01 01:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.471 and 1.216 (still bad) 2010-Apr-01 01:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.446 and 1.213 (still bad) 2010-Apr-01 01:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.215 (still bad) 2010-Apr-01 01:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.214 (still bad) 2010-Apr-01 01:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.216 (still bad) 2010-Apr-01 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.216 (still bad) 2010-Apr-01 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.219 (still bad) 2010-Apr-01 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.219 (still bad) 2010-Apr-01 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.220 (still bad) 2010-Apr-01 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.222 (still bad) 2010-Apr-01 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.223 (still bad) 2010-Apr-01 01:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.220 (still bad) 2010-Apr-01 01:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.218 (still bad) 2010-Apr-01 01:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.218 (still bad) 2010-Apr-01 01:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.418 and 1.215 (still bad) 2010-Apr-01 01:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.218 (still bad) 2010-Apr-01 01:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.221 (still bad) 2010-Apr-01 01:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.218 (still bad) 2010-Apr-01 01:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.224 (still bad) 2010-Apr-01 01:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.223 (still bad) 2010-Apr-01 01:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.225 (still bad) 2010-Apr-01 01:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.232 (still bad) 2010-Apr-01 01:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.232 (still bad) 2010-Apr-01 01:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.231 (still bad) 2010-Apr-01 01:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.233 (still bad) 2010-Apr-01 01:54:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.400 < 0.75)! 2010-Apr-01 01:54:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.214 1.056 1.019 2010-Apr-01 01:54:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.400 1.175 1.177 1.011 2010-Apr-01 01:54:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.183 0.915 1.225 1.034 2010-Apr-01 01:54:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.922 1.073 1.073 2010-Apr-01 01:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.225 (still bad) 2010-Apr-01 01:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.226 (still bad) 2010-Apr-01 01:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.220 (still bad) 2010-Apr-01 01:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.408 and 1.215 (still bad) 2010-Apr-01 01:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.218 (still bad) 2010-Apr-01 01:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.218 (still bad) 2010-Apr-01 01:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.219 (still bad) 2010-Apr-01 01:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.219 (still bad) 2010-Apr-01 01:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.220 (still bad) 2010-Apr-01 01:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.218 (still bad) 2010-Apr-01 01:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.221 (still bad) 2010-Apr-01 01:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.218 (still bad) 2010-Apr-01 01:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.218 (still bad) 2010-Apr-01 01:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.219 (still bad) 2010-Apr-01 01:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.218 (still bad) 2010-Apr-01 01:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.218 (still bad) 2010-Apr-01 01:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.217 (still bad) 2010-Apr-01 01:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.411 and 1.216 (still bad) 2010-Apr-01 01:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.217 (still bad) 2010-Apr-01 01:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.409 and 1.219 (still bad) 2010-Apr-01 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.219 (still bad) 2010-Apr-01 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.217 (still bad) 2010-Apr-01 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.216 (still bad) 2010-Apr-01 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.217 (still bad) 2010-Apr-01 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.221 (still bad) 2010-Apr-01 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.219 (still bad) 2010-Apr-01 01:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.216 (still bad) 2010-Apr-01 01:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.219 (still bad) 2010-Apr-01 01:55:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.399 < 0.75)! 2010-Apr-01 01:55:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.214 1.057 1.021 2010-Apr-01 01:55:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.399 1.173 1.175 1.009 2010-Apr-01 01:55:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.182 0.918 1.217 1.025 2010-Apr-01 01:55:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.922 1.073 1.072 2010-Apr-01 01:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.218 (still bad) 2010-Apr-01 01:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.220 (still bad) 2010-Apr-01 01:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.216 (still bad) 2010-Apr-01 01:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.214 (still bad) 2010-Apr-01 01:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.217 (still bad) 2010-Apr-01 01:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.214 (still bad) 2010-Apr-01 01:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.220 (still bad) 2010-Apr-01 01:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.217 (still bad) 2010-Apr-01 01:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.216 (still bad) 2010-Apr-01 01:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.218 (still bad) 2010-Apr-01 01:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.214 (still bad) 2010-Apr-01 01:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.222 (still bad) 2010-Apr-01 01:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.212 (still bad) 2010-Apr-01 01:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.212 (still bad) 2010-Apr-01 01:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.217 (still bad) 2010-Apr-01 01:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.213 (still bad) 2010-Apr-01 01:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.222 (still bad) 2010-Apr-01 01:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.213 (still bad) 2010-Apr-01 01:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.212 (still bad) 2010-Apr-01 01:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.214 (still bad) 2010-Apr-01 01:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.222 (still bad) 2010-Apr-01 01:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.217 (still bad) 2010-Apr-01 01:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.214 (still bad) 2010-Apr-01 01:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.217 (still bad) 2010-Apr-01 01:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.214 (still bad) 2010-Apr-01 01:56:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.384 < 0.75)! 2010-Apr-01 01:56:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.215 1.055 1.017 2010-Apr-01 01:56:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.384 1.177 1.180 1.013 2010-Apr-01 01:56:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.182 0.916 1.215 1.026 2010-Apr-01 01:56:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.926 1.076 1.076 2010-Apr-01 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.220 (still bad) 2010-Apr-01 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.213 (still bad) 2010-Apr-01 01:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.212 (still bad) 2010-Apr-01 01:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.217 (still bad) 2010-Apr-01 01:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.215 (still bad) 2010-Apr-01 01:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.215 (still bad) 2010-Apr-01 01:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.223 (still bad) 2010-Apr-01 01:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.216 (still bad) 2010-Apr-01 01:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.212 (still bad) 2010-Apr-01 01:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.218 (still bad) 2010-Apr-01 01:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.213 (still bad) 2010-Apr-01 01:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.223 (still bad) 2010-Apr-01 01:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.216 (still bad) 2010-Apr-01 01:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.214 (still bad) 2010-Apr-01 01:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.213 (still bad) 2010-Apr-01 01:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.221 (still bad) 2010-Apr-01 01:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.214 (still bad) 2010-Apr-01 01:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.213 (still bad) 2010-Apr-01 01:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.220 (still bad) 2010-Apr-01 01:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.216 (still bad) 2010-Apr-01 01:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.219 (still bad) 2010-Apr-01 01:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.225 (still bad) 2010-Apr-01 01:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.414 and 1.218 (still bad) 2010-Apr-01 01:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.216 (still bad) 2010-Apr-01 01:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.221 (still bad) 2010-Apr-01 01:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.219 (still bad) 2010-Apr-01 01:57:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.409 < 0.75)! 2010-Apr-01 01:57:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.219 1.056 1.020 2010-Apr-01 01:57:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.409 1.178 1.179 1.013 2010-Apr-01 01:57:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.179 0.917 1.211 1.028 2010-Apr-01 01:57:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.924 1.071 1.073 2010-Apr-01 01:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.215 (still bad) 2010-Apr-01 01:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.213 (still bad) 2010-Apr-01 01:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.215 (still bad) 2010-Apr-01 01:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.214 (still bad) 2010-Apr-01 01:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.217 (still bad) 2010-Apr-01 01:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.214 (still bad) 2010-Apr-01 01:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.402 and 1.216 (still bad) 2010-Apr-01 01:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.214 (still bad) 2010-Apr-01 01:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.215 (still bad) 2010-Apr-01 01:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.407 and 1.216 (still bad) 2010-Apr-01 01:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.214 (still bad) 2010-Apr-01 01:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.218 (still bad) 2010-Apr-01 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.213 (still bad) 2010-Apr-01 01:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.215 (still bad) 2010-Apr-01 01:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.406 and 1.215 (still bad) 2010-Apr-01 01:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.404 and 1.213 (still bad) 2010-Apr-01 01:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.215 (still bad) 2010-Apr-01 01:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.400 and 1.215 (still bad) 2010-Apr-01 01:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.410 and 1.213 (still bad) 2010-Apr-01 01:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.405 and 1.213 (still bad) 2010-Apr-01 01:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.423 and 1.214 (still bad) 2010-Apr-01 01:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.440 and 1.214 (still bad) 2010-Apr-01 01:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.401 and 1.213 (still bad) 2010-Apr-01 01:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.403 and 1.214 (still bad) 2010-Apr-01 01:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.215 (still bad) 2010-Apr-01 01:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.215 (still bad) 2010-Apr-01 01:58:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 01:58:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.216 1.050 1.020 2010-Apr-01 01:58:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.176 1.177 1.011 2010-Apr-01 01:58:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.181 0.914 1.211 1.027 2010-Apr-01 01:58:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.925 1.068 1.074 2010-Apr-01 01:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.212 (still bad) 2010-Apr-01 01:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.211 (still bad) 2010-Apr-01 01:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.215 (still bad) 2010-Apr-01 01:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.214 (still bad) 2010-Apr-01 01:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.216 (still bad) 2010-Apr-01 01:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.215 (still bad) 2010-Apr-01 01:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.215 (still bad) 2010-Apr-01 01:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.216 (still bad) 2010-Apr-01 01:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.216 (still bad) 2010-Apr-01 01:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.214 (still bad) 2010-Apr-01 01:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.218 (still bad) 2010-Apr-01 01:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.218 (still bad) 2010-Apr-01 01:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.212 (still bad) 2010-Apr-01 01:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.212 (still bad) 2010-Apr-01 01:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 01:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.212 (still bad) 2010-Apr-01 01:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.216 (still bad) 2010-Apr-01 01:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.218 (still bad) 2010-Apr-01 01:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.214 (still bad) 2010-Apr-01 01:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.216 (still bad) 2010-Apr-01 01:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.214 (still bad) 2010-Apr-01 01:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.214 (still bad) 2010-Apr-01 01:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.216 (still bad) 2010-Apr-01 01:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.213 (still bad) 2010-Apr-01 01:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.214 (still bad) 2010-Apr-01 01:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.218 (still bad) 2010-Apr-01 01:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.214 (still bad) 2010-Apr-01 01:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.214 (still bad) 2010-Apr-01 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.219 (still bad) 2010-Apr-01 01:59:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.392 < 0.75)! 2010-Apr-01 01:59:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.216 1.055 1.025 2010-Apr-01 01:59:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.392 1.186 1.178 1.008 2010-Apr-01 01:59:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.181 0.917 1.212 1.024 2010-Apr-01 01:59:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.926 1.068 1.076 2010-Apr-01 01:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.211 (still bad) 2010-Apr-01 01:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.216 (still bad) 2010-Apr-01 01:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.214 (still bad) 2010-Apr-01 01:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.215 (still bad) 2010-Apr-01 01:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.220 (still bad) 2010-Apr-01 01:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.217 (still bad) 2010-Apr-01 01:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.214 (still bad) 2010-Apr-01 01:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.218 (still bad) 2010-Apr-01 02:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.213 (still bad) 2010-Apr-01 02:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.215 (still bad) 2010-Apr-01 02:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.217 (still bad) 2010-Apr-01 02:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.216 (still bad) 2010-Apr-01 02:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.214 (still bad) 2010-Apr-01 02:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.216 (still bad) 2010-Apr-01 02:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.216 (still bad) 2010-Apr-01 02:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.216 (still bad) 2010-Apr-01 02:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.217 (still bad) 2010-Apr-01 02:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.216 (still bad) 2010-Apr-01 02:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.215 (still bad) 2010-Apr-01 02:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.216 (still bad) 2010-Apr-01 02:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.212 (still bad) 2010-Apr-01 02:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.214 (still bad) 2010-Apr-01 02:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.216 (still bad) 2010-Apr-01 02:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.216 (still bad) 2010-Apr-01 02:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.215 (still bad) 2010-Apr-01 02:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.216 (still bad) 2010-Apr-01 02:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.214 (still bad) 2010-Apr-01 02:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.214 (still bad) 2010-Apr-01 02:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.219 (still bad) 2010-Apr-01 02:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.212 (still bad) 2010-Apr-01 02:00:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.376 < 0.75)! 2010-Apr-01 02:00:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.213 1.053 1.014 2010-Apr-01 02:00:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.376 1.177 1.177 1.009 2010-Apr-01 02:00:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.196 0.923 1.211 1.022 2010-Apr-01 02:00:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.920 1.067 1.068 2010-Apr-01 02:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.216 (still bad) 2010-Apr-01 02:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.215 (still bad) 2010-Apr-01 02:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.213 (still bad) 2010-Apr-01 02:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.217 (still bad) 2010-Apr-01 02:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.216 (still bad) 2010-Apr-01 02:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.216 (still bad) 2010-Apr-01 02:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.214 (still bad) 2010-Apr-01 02:01:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:01:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:01:00 LOG5 end_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-Apr-01 02:01:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:01:00 LOG5 end_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2010-Apr-01 02:01:00 LOG1 fixed_driftmap: New position: year = 2010.2493744771466 RA = 14:38:46.1 RA/Dec = 14:39:16.6 +19:17:46.7 2010-Apr-01 02:01:00 NOTE fixed_driftmap: Correcting ZA to 6:32:24.1 ... 2010-Apr-01 02:01:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5400342089 -CF 2010-Apr-01 02:01:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:01:00 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:01:00 LOG5 begin_task: Level: (2) ID = <10473> Status = 0 0 0 0 ok 2010-Apr-01 02:01:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:01:00 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:01:00 LOG5 begin_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2010-Apr-01 02:01:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:01:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:01:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:01:00 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:01:00 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2010-Apr-01 02:01:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5400342089 -CF 2010-Apr-01 02:01:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:01:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:01:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:01:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:01:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:01:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:01:01 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:01:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:01:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:01:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:01:01 LOG5 begin_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.213 (still bad) 2010-Apr-01 02:01:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:01:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:01:01 LOG5 end_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:01:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:01:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:01:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:01:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:01:01 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:01:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:01:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:01:01 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:01:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:01:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:01:01 LOG5 end_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:01:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:01:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:01:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:01:01 LOG5 begin_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:01:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:01:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:01:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:01:01 LOG5 end_task: Level: (3) ID = <10478> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:01:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:01:01 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2010-Apr-01 02:01:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:01:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:01:01 INFO2 take_data: Starting WAPP 1-second scan: 9100024 2010-Apr-01 02:01:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:01:02 LOG5 begin_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2010-Apr-01 02:01:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:01:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:01:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21663.00 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.671 (still bad) 2010-Apr-01 02:01:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:01:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:01:04 LOG5 end_task: Level: (4) ID = <10480> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:01:04 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:01:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:01:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:01:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:01:04 LOG5 begin_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:01:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:01:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:01:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:01:04 LOG5 end_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:01:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:01:04 LOG5 finish_task: Level: (2) ID = <10473> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:01:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:01:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:01:04 LOG5 end_task: Level: (2) ID = <10473> Status = 0 0 0 0 ok 2010-Apr-01 02:01:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 41 of 99 2010-Apr-01 02:01:05 LOG4 send_obs_status: To obs_status: <1> LOOP 41 2010-Apr-01 02:01:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:01:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:01:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:01:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:01:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:01:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:01:05 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:01:05 LOG5 begin_task: Level: (2) ID = <10482> Status = 0 0 0 0 ok 2010-Apr-01 02:01:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:01:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:01:05 INFO2 take_data: Starting WAPP 600-second scan: 9100025 2010-Apr-01 02:01:05 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:01:05 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2010-Apr-01 02:01:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:01:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:01:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:01:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21666.00 2010-Apr-01 02:01:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0012.fits 2010-Apr-01 02:01:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0012.fits} 2010-Apr-01 02:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.507 and 1.671 (still bad) 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.214 (still bad) 2010-Apr-01 02:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.217 (still bad) 2010-Apr-01 02:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.215 (still bad) 2010-Apr-01 02:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.217 (still bad) 2010-Apr-01 02:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.225 (still bad) 2010-Apr-01 02:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.217 (still bad) 2010-Apr-01 02:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.217 (still bad) 2010-Apr-01 02:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.219 (still bad) 2010-Apr-01 02:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.217 (still bad) 2010-Apr-01 02:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.218 (still bad) 2010-Apr-01 02:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.227 (still bad) 2010-Apr-01 02:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.220 (still bad) 2010-Apr-01 02:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.218 (still bad) 2010-Apr-01 02:01:33 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:01:33.301 (seconds: 7293.301)!} 2010-Apr-01 02:01:33 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:01:33.301 (seconds: 7293.301)! 2010-Apr-01 02:01:34 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 7292.0 to 7293.0! 2010-Apr-01 02:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.221 (still bad) 2010-Apr-01 02:01:35 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (7292.0 - 7294.0)! 2010-Apr-01 02:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.216 (still bad) 2010-Apr-01 02:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.218 (still bad) 2010-Apr-01 02:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.228 (still bad) 2010-Apr-01 02:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.219 (still bad) 2010-Apr-01 02:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.219 (still bad) 2010-Apr-01 02:01:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.370 < 0.75)! 2010-Apr-01 02:01:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.222 1.051 1.024 2010-Apr-01 02:01:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.370 1.183 1.171 1.014 2010-Apr-01 02:01:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.179 0.917 1.212 1.025 2010-Apr-01 02:01:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.925 1.067 1.073 2010-Apr-01 02:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.221 (still bad) 2010-Apr-01 02:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.218 (still bad) 2010-Apr-01 02:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.223 (still bad) 2010-Apr-01 02:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.220 (still bad) 2010-Apr-01 02:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.223 (still bad) 2010-Apr-01 02:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.219 (still bad) 2010-Apr-01 02:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.361 and 1.224 (still bad) 2010-Apr-01 02:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.230 (still bad) 2010-Apr-01 02:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.221 (still bad) 2010-Apr-01 02:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.219 (still bad) 2010-Apr-01 02:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.224 (still bad) 2010-Apr-01 02:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.220 (still bad) 2010-Apr-01 02:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.222 (still bad) 2010-Apr-01 02:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.222 (still bad) 2010-Apr-01 02:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.220 (still bad) 2010-Apr-01 02:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.222 (still bad) 2010-Apr-01 02:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.221 (still bad) 2010-Apr-01 02:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.220 (still bad) 2010-Apr-01 02:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.219 (still bad) 2010-Apr-01 02:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.220 (still bad) 2010-Apr-01 02:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.223 (still bad) 2010-Apr-01 02:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.220 (still bad) 2010-Apr-01 02:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.220 (still bad) 2010-Apr-01 02:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.222 (still bad) 2010-Apr-01 02:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.220 (still bad) 2010-Apr-01 02:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.219 (still bad) 2010-Apr-01 02:02:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 02:02:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.223 1.047 1.023 2010-Apr-01 02:02:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.182 1.171 1.016 2010-Apr-01 02:02:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.919 1.207 1.031 2010-Apr-01 02:02:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.926 1.064 1.077 2010-Apr-01 02:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.222 (still bad) 2010-Apr-01 02:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.223 (still bad) 2010-Apr-01 02:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.226 (still bad) 2010-Apr-01 02:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.222 (still bad) 2010-Apr-01 02:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.221 (still bad) 2010-Apr-01 02:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.225 (still bad) 2010-Apr-01 02:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.222 (still bad) 2010-Apr-01 02:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.222 (still bad) 2010-Apr-01 02:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.225 (still bad) 2010-Apr-01 02:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.223 (still bad) 2010-Apr-01 02:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.220 (still bad) 2010-Apr-01 02:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.224 (still bad) 2010-Apr-01 02:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.221 (still bad) 2010-Apr-01 02:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.222 (still bad) 2010-Apr-01 02:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.223 (still bad) 2010-Apr-01 02:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.220 (still bad) 2010-Apr-01 02:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.220 (still bad) 2010-Apr-01 02:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.223 (still bad) 2010-Apr-01 02:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.222 (still bad) 2010-Apr-01 02:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.222 (still bad) 2010-Apr-01 02:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.227 (still bad) 2010-Apr-01 02:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.219 (still bad) 2010-Apr-01 02:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.218 (still bad) 2010-Apr-01 02:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.220 (still bad) 2010-Apr-01 02:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.218 (still bad) 2010-Apr-01 02:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.221 (still bad) 2010-Apr-01 02:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.224 (still bad) 2010-Apr-01 02:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.220 (still bad) 2010-Apr-01 02:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.219 (still bad) 2010-Apr-01 02:03:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.366 < 0.75)! 2010-Apr-01 02:03:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.223 1.048 1.023 2010-Apr-01 02:03:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.366 1.184 1.173 1.016 2010-Apr-01 02:03:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.921 1.205 1.033 2010-Apr-01 02:03:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.930 1.062 1.080 2010-Apr-01 02:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.221 (still bad) 2010-Apr-01 02:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.222 (still bad) 2010-Apr-01 02:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.229 (still bad) 2010-Apr-01 02:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.223 (still bad) 2010-Apr-01 02:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.221 (still bad) 2010-Apr-01 02:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.226 (still bad) 2010-Apr-01 02:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.222 (still bad) 2010-Apr-01 02:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.222 (still bad) 2010-Apr-01 02:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.223 (still bad) 2010-Apr-01 02:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.223 (still bad) 2010-Apr-01 02:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.223 (still bad) 2010-Apr-01 02:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.221 (still bad) 2010-Apr-01 02:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.224 (still bad) 2010-Apr-01 02:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.229 (still bad) 2010-Apr-01 02:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.223 (still bad) 2010-Apr-01 02:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.223 (still bad) 2010-Apr-01 02:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.356 and 1.220 (still bad) 2010-Apr-01 02:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.223 (still bad) 2010-Apr-01 02:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.226 (still bad) 2010-Apr-01 02:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.223 (still bad) 2010-Apr-01 02:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.226 (still bad) 2010-Apr-01 02:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.223 (still bad) 2010-Apr-01 02:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.223 (still bad) 2010-Apr-01 02:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.227 (still bad) 2010-Apr-01 02:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.220 (still bad) 2010-Apr-01 02:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.222 (still bad) 2010-Apr-01 02:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.223 (still bad) 2010-Apr-01 02:04:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.371 < 0.75)! 2010-Apr-01 02:04:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.223 1.049 1.024 2010-Apr-01 02:04:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.371 1.180 1.177 1.017 2010-Apr-01 02:04:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.920 1.205 1.030 2010-Apr-01 02:04:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.931 1.070 1.083 2010-Apr-01 02:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.225 (still bad) 2010-Apr-01 02:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.225 (still bad) 2010-Apr-01 02:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.223 (still bad) 2010-Apr-01 02:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.223 (still bad) 2010-Apr-01 02:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.225 (still bad) 2010-Apr-01 02:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.220 (still bad) 2010-Apr-01 02:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.222 (still bad) 2010-Apr-01 02:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.227 (still bad) 2010-Apr-01 02:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.223 (still bad) 2010-Apr-01 02:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.222 (still bad) 2010-Apr-01 02:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.222 (still bad) 2010-Apr-01 02:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.226 (still bad) 2010-Apr-01 02:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.228 (still bad) 2010-Apr-01 02:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.231 (still bad) 2010-Apr-01 02:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.233 (still bad) 2010-Apr-01 02:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.233 (still bad) 2010-Apr-01 02:05:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.374 < 0.75)! 2010-Apr-01 02:05:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.231 1.054 1.026 2010-Apr-01 02:05:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.374 1.194 1.172 1.019 2010-Apr-01 02:05:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.179 0.920 1.211 1.029 2010-Apr-01 02:05:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.927 1.064 1.078 2010-Apr-01 02:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.234 (still bad) 2010-Apr-01 02:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.230 (still bad) 2010-Apr-01 02:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.226 (still bad) 2010-Apr-01 02:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.224 (still bad) 2010-Apr-01 02:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.226 (still bad) 2010-Apr-01 02:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.232 (still bad) 2010-Apr-01 02:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.224 (still bad) 2010-Apr-01 02:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.225 (still bad) 2010-Apr-01 02:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.225 (still bad) 2010-Apr-01 02:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.227 (still bad) 2010-Apr-01 02:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.236 (still bad) 2010-Apr-01 02:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.228 (still bad) 2010-Apr-01 02:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.221 (still bad) 2010-Apr-01 02:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.225 (still bad) 2010-Apr-01 02:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.237 (still bad) 2010-Apr-01 02:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.253 (still bad) 2010-Apr-01 02:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.278 (still bad) 2010-Apr-01 02:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.295 (still bad) 2010-Apr-01 02:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.319 (still bad) 2010-Apr-01 02:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.343 (still bad) 2010-Apr-01 02:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.343 (still bad) 2010-Apr-01 02:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.341 (still bad) 2010-Apr-01 02:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.333 (still bad) 2010-Apr-01 02:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.308 (still bad) 2010-Apr-01 02:06:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.368 < 0.75)! 2010-Apr-01 02:06:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.286 1.051 1.024 2010-Apr-01 02:06:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.368 1.185 1.172 1.021 2010-Apr-01 02:06:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.178 0.922 1.208 1.033 2010-Apr-01 02:06:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.929 1.066 1.081 2010-Apr-01 02:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.273 (still bad) 2010-Apr-01 02:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.248 (still bad) 2010-Apr-01 02:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.231 (still bad) 2010-Apr-01 02:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.244 (still bad) 2010-Apr-01 02:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.261 (still bad) 2010-Apr-01 02:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.283 (still bad) 2010-Apr-01 02:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.304 (still bad) 2010-Apr-01 02:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.314 (still bad) 2010-Apr-01 02:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.313 (still bad) 2010-Apr-01 02:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.309 (still bad) 2010-Apr-01 02:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.289 (still bad) 2010-Apr-01 02:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.276 (still bad) 2010-Apr-01 02:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.253 (still bad) 2010-Apr-01 02:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 02:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.223 (still bad) 2010-Apr-01 02:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.224 (still bad) 2010-Apr-01 02:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.232 (still bad) 2010-Apr-01 02:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.223 (still bad) 2010-Apr-01 02:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.220 (still bad) 2010-Apr-01 02:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.226 (still bad) 2010-Apr-01 02:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.361 and 1.223 (still bad) 2010-Apr-01 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.224 (still bad) 2010-Apr-01 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.361 and 1.226 (still bad) 2010-Apr-01 02:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.360 and 1.223 (still bad) 2010-Apr-01 02:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.222 (still bad) 2010-Apr-01 02:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.360 and 1.224 (still bad) 2010-Apr-01 02:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.364 and 1.223 (still bad) 2010-Apr-01 02:07:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.360 < 0.75)! 2010-Apr-01 02:07:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.225 1.049 1.024 2010-Apr-01 02:07:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.360 1.185 1.177 1.023 2010-Apr-01 02:07:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.926 1.211 1.034 2010-Apr-01 02:07:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.927 1.065 1.079 2010-Apr-01 02:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.226 (still bad) 2010-Apr-01 02:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.226 (still bad) 2010-Apr-01 02:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.227 (still bad) 2010-Apr-01 02:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.226 (still bad) 2010-Apr-01 02:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.222 (still bad) 2010-Apr-01 02:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.233 (still bad) 2010-Apr-01 02:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.363 and 1.226 (still bad) 2010-Apr-01 02:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.360 and 1.225 (still bad) 2010-Apr-01 02:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.231 (still bad) 2010-Apr-01 02:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.225 (still bad) 2010-Apr-01 02:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.226 (still bad) 2010-Apr-01 02:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.226 (still bad) 2010-Apr-01 02:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.226 (still bad) 2010-Apr-01 02:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.230 (still bad) 2010-Apr-01 02:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.226 (still bad) 2010-Apr-01 02:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.228 (still bad) 2010-Apr-01 02:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.232 (still bad) 2010-Apr-01 02:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.230 (still bad) 2010-Apr-01 02:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.225 (still bad) 2010-Apr-01 02:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.222 (still bad) 2010-Apr-01 02:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.226 (still bad) 2010-Apr-01 02:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:08:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.382 < 0.75)! 2010-Apr-01 02:08:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.227 1.050 1.027 2010-Apr-01 02:08:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.382 1.216 1.172 1.025 2010-Apr-01 02:08:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.177 0.925 1.206 1.036 2010-Apr-01 02:08:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.934 1.069 1.086 2010-Apr-01 02:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.227 (still bad) 2010-Apr-01 02:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.227 (still bad) 2010-Apr-01 02:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.225 (still bad) 2010-Apr-01 02:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.226 (still bad) 2010-Apr-01 02:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.229 (still bad) 2010-Apr-01 02:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.226 (still bad) 2010-Apr-01 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.225 (still bad) 2010-Apr-01 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.236 (still bad) 2010-Apr-01 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.244 (still bad) 2010-Apr-01 02:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.258 (still bad) 2010-Apr-01 02:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.277 (still bad) 2010-Apr-01 02:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.301 (still bad) 2010-Apr-01 02:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.313 (still bad) 2010-Apr-01 02:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.322 (still bad) 2010-Apr-01 02:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.317 (still bad) 2010-Apr-01 02:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.310 (still bad) 2010-Apr-01 02:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.299 (still bad) 2010-Apr-01 02:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.277 (still bad) 2010-Apr-01 02:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.258 (still bad) 2010-Apr-01 02:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.247 (still bad) 2010-Apr-01 02:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.235 (still bad) 2010-Apr-01 02:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.240 (still bad) 2010-Apr-01 02:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.253 (still bad) 2010-Apr-01 02:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.258 (still bad) 2010-Apr-01 02:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.255 (still bad) 2010-Apr-01 02:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.254 (still bad) 2010-Apr-01 02:09:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 02:09:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.229 1.048 1.029 2010-Apr-01 02:09:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.192 1.163 1.023 2010-Apr-01 02:09:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.172 0.927 1.244 1.065 2010-Apr-01 02:09:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.935 1.064 1.087 2010-Apr-01 02:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.230 (still bad) 2010-Apr-01 02:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.227 (still bad) 2010-Apr-01 02:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.227 (still bad) 2010-Apr-01 02:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.234 (still bad) 2010-Apr-01 02:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.224 (still bad) 2010-Apr-01 02:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 02:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.231 (still bad) 2010-Apr-01 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.232 (still bad) 2010-Apr-01 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.234 (still bad) 2010-Apr-01 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.232 (still bad) 2010-Apr-01 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.229 (still bad) 2010-Apr-01 02:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.228 (still bad) 2010-Apr-01 02:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.235 (still bad) 2010-Apr-01 02:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.229 (still bad) 2010-Apr-01 02:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.230 (still bad) 2010-Apr-01 02:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.233 (still bad) 2010-Apr-01 02:10:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.381 < 0.75)! 2010-Apr-01 02:10:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.228 1.048 1.028 2010-Apr-01 02:10:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.381 1.220 1.165 1.023 2010-Apr-01 02:10:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.171 0.928 1.206 1.040 2010-Apr-01 02:10:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.932 1.059 1.082 2010-Apr-01 02:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.228 (still bad) 2010-Apr-01 02:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.229 (still bad) 2010-Apr-01 02:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.233 (still bad) 2010-Apr-01 02:11:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:11:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:11:06 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:11:06 LOG5 end_task: Level: (2) ID = <10482> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 LOG1 fixed_driftmap: New position: year = 2010.2493936801279 RA = 14:48:57.0 RA/Dec = 14:49:27.4 +19:17:52.6 2010-Apr-01 02:11:06 NOTE fixed_driftmap: Correcting ZA to 6:33:10.8 ... 2010-Apr-01 02:11:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5529962284 -CF 2010-Apr-01 02:11:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:11:06 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:11:06 LOG5 begin_task: Level: (2) ID = <10484> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:11:06 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:11:06 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:11:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:11:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:11:06 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:11:06 LOG5 begin_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5529962284 -CF 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:11:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:11:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:11:06 LOG5 end_task: Level: (4) ID = <10486> Status = 0 0 0 0 ok 2010-Apr-01 02:11:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:11:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:11:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:11:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:11:06 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:11:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:11:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:11:07 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:11:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:11:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:11:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:11:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:11:07 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:11:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:11:07 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:11:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:11:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:11:07 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:11:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:11:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:11:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:11:07 LOG5 begin_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:11:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:11:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:11:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:11:07 LOG5 end_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:11:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:11:07 LOG5 begin_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:11:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:11:07 INFO2 take_data: Starting WAPP 1-second scan: 9100026 2010-Apr-01 02:11:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:11:07 LOG5 begin_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2010-Apr-01 02:11:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.233 (still bad) 2010-Apr-01 02:11:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:11:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22268.00 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.678 (still bad) 2010-Apr-01 02:11:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:11:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:11:09 LOG5 end_task: Level: (4) ID = <10491> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:11:09 LOG5 end_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:11:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:11:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:11:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:11:09 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:11:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:11:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:11:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:11:09 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:11:09 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:11:09 LOG5 finish_task: Level: (2) ID = <10484> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:11:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:11:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:11:09 LOG5 end_task: Level: (2) ID = <10484> Status = 0 0 0 0 ok 2010-Apr-01 02:11:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 42 of 99 2010-Apr-01 02:11:09 LOG4 send_obs_status: To obs_status: <1> LOOP 42 2010-Apr-01 02:11:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:11:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:11:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:11:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:11:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:11:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:11:10 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:11:10 LOG5 begin_task: Level: (2) ID = <10493> Status = 0 0 0 0 ok 2010-Apr-01 02:11:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:11:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:11:10 INFO2 take_data: Starting WAPP 600-second scan: 9100027 2010-Apr-01 02:11:10 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:11:10 LOG5 begin_task: Level: (3) ID = <10494> Status = 0 0 0 0 ok 2010-Apr-01 02:11:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:11:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:11:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:11:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22271.00 2010-Apr-01 02:11:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0013.fits 2010-Apr-01 02:11:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0013.fits} 2010-Apr-01 02:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.483 and 1.678 (still bad) 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:11:12 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Apr-01 02:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.236 (still bad) 2010-Apr-01 02:11:14 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Apr-01 02:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.240 (still bad) 2010-Apr-01 02:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.247 (still bad) 2010-Apr-01 02:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.242 (still bad) 2010-Apr-01 02:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.238 (still bad) 2010-Apr-01 02:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.243 (still bad) 2010-Apr-01 02:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.234 (still bad) 2010-Apr-01 02:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.232 (still bad) 2010-Apr-01 02:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.237 (still bad) 2010-Apr-01 02:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.226 (still bad) 2010-Apr-01 02:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.235 (still bad) 2010-Apr-01 02:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.229 (still bad) 2010-Apr-01 02:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.227 (still bad) 2010-Apr-01 02:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.229 (still bad) 2010-Apr-01 02:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.226 (still bad) 2010-Apr-01 02:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.234 (still bad) 2010-Apr-01 02:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:11:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.376 < 0.75)! 2010-Apr-01 02:11:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.224 1.047 1.026 2010-Apr-01 02:11:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.376 1.185 1.172 1.021 2010-Apr-01 02:11:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.175 0.928 1.199 1.036 2010-Apr-01 02:11:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.931 1.063 1.081 2010-Apr-01 02:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.228 (still bad) 2010-Apr-01 02:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.223 (still bad) 2010-Apr-01 02:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.229 (still bad) 2010-Apr-01 02:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.223 (still bad) 2010-Apr-01 02:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.221 (still bad) 2010-Apr-01 02:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.224 (still bad) 2010-Apr-01 02:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.224 (still bad) 2010-Apr-01 02:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.234 (still bad) 2010-Apr-01 02:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.228 (still bad) 2010-Apr-01 02:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.231 (still bad) 2010-Apr-01 02:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.229 (still bad) 2010-Apr-01 02:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.238 (still bad) 2010-Apr-01 02:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.229 (still bad) 2010-Apr-01 02:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.231 (still bad) 2010-Apr-01 02:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.229 (still bad) 2010-Apr-01 02:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.229 (still bad) 2010-Apr-01 02:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.226 (still bad) 2010-Apr-01 02:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.226 (still bad) 2010-Apr-01 02:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.228 (still bad) 2010-Apr-01 02:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.227 (still bad) 2010-Apr-01 02:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.225 (still bad) 2010-Apr-01 02:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.224 (still bad) 2010-Apr-01 02:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.226 (still bad) 2010-Apr-01 02:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.225 (still bad) 2010-Apr-01 02:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.222 (still bad) 2010-Apr-01 02:13:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.381 < 0.75)! 2010-Apr-01 02:13:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.223 1.050 1.027 2010-Apr-01 02:13:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.381 1.185 1.176 1.023 2010-Apr-01 02:13:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.182 0.923 1.213 1.036 2010-Apr-01 02:13:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.929 1.063 1.079 2010-Apr-01 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.225 (still bad) 2010-Apr-01 02:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.224 (still bad) 2010-Apr-01 02:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.224 (still bad) 2010-Apr-01 02:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.224 (still bad) 2010-Apr-01 02:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.223 (still bad) 2010-Apr-01 02:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.222 (still bad) 2010-Apr-01 02:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.224 (still bad) 2010-Apr-01 02:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.223 (still bad) 2010-Apr-01 02:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.226 (still bad) 2010-Apr-01 02:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.225 (still bad) 2010-Apr-01 02:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.225 (still bad) 2010-Apr-01 02:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.226 (still bad) 2010-Apr-01 02:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.224 (still bad) 2010-Apr-01 02:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.225 (still bad) 2010-Apr-01 02:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.224 (still bad) 2010-Apr-01 02:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.225 (still bad) 2010-Apr-01 02:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.223 (still bad) 2010-Apr-01 02:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.224 (still bad) 2010-Apr-01 02:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.224 (still bad) 2010-Apr-01 02:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.223 (still bad) 2010-Apr-01 02:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.223 (still bad) 2010-Apr-01 02:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.224 (still bad) 2010-Apr-01 02:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.223 (still bad) 2010-Apr-01 02:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.220 (still bad) 2010-Apr-01 02:14:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.381 < 0.75)! 2010-Apr-01 02:14:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.224 1.053 1.024 2010-Apr-01 02:14:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.381 1.184 1.175 1.018 2010-Apr-01 02:14:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.183 0.927 1.209 1.035 2010-Apr-01 02:14:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.927 1.065 1.077 2010-Apr-01 02:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.225 (still bad) 2010-Apr-01 02:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.225 (still bad) 2010-Apr-01 02:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.225 (still bad) 2010-Apr-01 02:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.222 (still bad) 2010-Apr-01 02:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.225 (still bad) 2010-Apr-01 02:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.223 (still bad) 2010-Apr-01 02:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.226 (still bad) 2010-Apr-01 02:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.226 (still bad) 2010-Apr-01 02:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.227 (still bad) 2010-Apr-01 02:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.227 (still bad) 2010-Apr-01 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.227 (still bad) 2010-Apr-01 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.222 (still bad) 2010-Apr-01 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.226 (still bad) 2010-Apr-01 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.232 (still bad) 2010-Apr-01 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.224 (still bad) 2010-Apr-01 02:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.226 (still bad) 2010-Apr-01 02:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.228 (still bad) 2010-Apr-01 02:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.224 (still bad) 2010-Apr-01 02:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.225 (still bad) 2010-Apr-01 02:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.231 (still bad) 2010-Apr-01 02:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.225 (still bad) 2010-Apr-01 02:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.225 (still bad) 2010-Apr-01 02:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.228 (still bad) 2010-Apr-01 02:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.226 (still bad) 2010-Apr-01 02:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.227 (still bad) 2010-Apr-01 02:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.229 (still bad) 2010-Apr-01 02:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.227 (still bad) 2010-Apr-01 02:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.223 (still bad) 2010-Apr-01 02:15:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.372 < 0.75)! 2010-Apr-01 02:15:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.225 1.068 1.043 2010-Apr-01 02:15:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.372 1.191 1.171 1.022 2010-Apr-01 02:15:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.184 0.924 1.208 1.030 2010-Apr-01 02:15:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.928 1.068 1.077 2010-Apr-01 02:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.227 (still bad) 2010-Apr-01 02:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.230 (still bad) 2010-Apr-01 02:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.230 (still bad) 2010-Apr-01 02:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.233 (still bad) 2010-Apr-01 02:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.231 (still bad) 2010-Apr-01 02:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.229 (still bad) 2010-Apr-01 02:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.230 (still bad) 2010-Apr-01 02:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.227 (still bad) 2010-Apr-01 02:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.225 (still bad) 2010-Apr-01 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.231 (still bad) 2010-Apr-01 02:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.225 (still bad) 2010-Apr-01 02:16:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.377 < 0.75)! 2010-Apr-01 02:16:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.229 1.051 1.027 2010-Apr-01 02:16:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.377 1.192 1.177 1.022 2010-Apr-01 02:16:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.180 0.929 1.208 1.033 2010-Apr-01 02:16:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.932 1.067 1.084 2010-Apr-01 02:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.234 (still bad) 2010-Apr-01 02:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.223 (still bad) 2010-Apr-01 02:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.221 (still bad) 2010-Apr-01 02:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.224 (still bad) 2010-Apr-01 02:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.228 (still bad) 2010-Apr-01 02:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.228 (still bad) 2010-Apr-01 02:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.229 (still bad) 2010-Apr-01 02:16:32 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:16:32.302 (seconds: 8192.302)!} 2010-Apr-01 02:16:32 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:16:32.302 (seconds: 8192.302)! 2010-Apr-01 02:16:33 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 8191.0 to 8192.0! 2010-Apr-01 02:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.225 (still bad) 2010-Apr-01 02:16:34 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (8191.0 - 8193.0)! 2010-Apr-01 02:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.228 (still bad) 2010-Apr-01 02:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.228 (still bad) 2010-Apr-01 02:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.227 (still bad) 2010-Apr-01 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.228 (still bad) 2010-Apr-01 02:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.232 (still bad) 2010-Apr-01 02:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.229 (still bad) 2010-Apr-01 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.228 (still bad) 2010-Apr-01 02:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.233 (still bad) 2010-Apr-01 02:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.229 (still bad) 2010-Apr-01 02:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.228 (still bad) 2010-Apr-01 02:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.232 (still bad) 2010-Apr-01 02:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.231 (still bad) 2010-Apr-01 02:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.233 (still bad) 2010-Apr-01 02:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.378 < 0.75)! 2010-Apr-01 02:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.238 1.055 1.027 2010-Apr-01 02:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.378 1.193 1.176 1.022 2010-Apr-01 02:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.185 0.930 1.214 1.035 2010-Apr-01 02:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.931 1.069 1.082 2010-Apr-01 02:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.240 (still bad) 2010-Apr-01 02:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.238 (still bad) 2010-Apr-01 02:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.241 (still bad) 2010-Apr-01 02:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.238 (still bad) 2010-Apr-01 02:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.238 (still bad) 2010-Apr-01 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.236 (still bad) 2010-Apr-01 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.230 (still bad) 2010-Apr-01 02:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.232 (still bad) 2010-Apr-01 02:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.228 (still bad) 2010-Apr-01 02:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.230 (still bad) 2010-Apr-01 02:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.227 (still bad) 2010-Apr-01 02:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.232 (still bad) 2010-Apr-01 02:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.226 (still bad) 2010-Apr-01 02:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 02:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.229 (still bad) 2010-Apr-01 02:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.225 (still bad) 2010-Apr-01 02:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.227 (still bad) 2010-Apr-01 02:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.223 (still bad) 2010-Apr-01 02:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.223 (still bad) 2010-Apr-01 02:18:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.386 < 0.75)! 2010-Apr-01 02:18:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.231 1.062 1.034 2010-Apr-01 02:18:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.386 1.202 1.181 1.025 2010-Apr-01 02:18:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.185 0.924 1.214 1.034 2010-Apr-01 02:18:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.935 1.074 1.086 2010-Apr-01 02:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.228 (still bad) 2010-Apr-01 02:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.227 (still bad) 2010-Apr-01 02:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.228 (still bad) 2010-Apr-01 02:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.227 (still bad) 2010-Apr-01 02:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.234 (still bad) 2010-Apr-01 02:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.227 (still bad) 2010-Apr-01 02:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.225 (still bad) 2010-Apr-01 02:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.231 (still bad) 2010-Apr-01 02:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.233 (still bad) 2010-Apr-01 02:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.252 (still bad) 2010-Apr-01 02:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.250 (still bad) 2010-Apr-01 02:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.250 (still bad) 2010-Apr-01 02:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.260 (still bad) 2010-Apr-01 02:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.259 (still bad) 2010-Apr-01 02:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.257 (still bad) 2010-Apr-01 02:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.259 (still bad) 2010-Apr-01 02:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.252 (still bad) 2010-Apr-01 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.246 (still bad) 2010-Apr-01 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.242 (still bad) 2010-Apr-01 02:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.234 (still bad) 2010-Apr-01 02:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.231 (still bad) 2010-Apr-01 02:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.235 (still bad) 2010-Apr-01 02:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.229 (still bad) 2010-Apr-01 02:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.226 (still bad) 2010-Apr-01 02:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.231 (still bad) 2010-Apr-01 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.229 (still bad) 2010-Apr-01 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:19:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.375 < 0.75)! 2010-Apr-01 02:19:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.235 1.058 1.030 2010-Apr-01 02:19:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.375 1.193 1.181 1.024 2010-Apr-01 02:19:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.924 1.227 1.042 2010-Apr-01 02:19:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.930 1.072 1.082 2010-Apr-01 02:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.228 (still bad) 2010-Apr-01 02:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.226 (still bad) 2010-Apr-01 02:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.226 (still bad) 2010-Apr-01 02:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.224 (still bad) 2010-Apr-01 02:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.226 (still bad) 2010-Apr-01 02:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.224 (still bad) 2010-Apr-01 02:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.225 (still bad) 2010-Apr-01 02:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.224 (still bad) 2010-Apr-01 02:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.224 (still bad) 2010-Apr-01 02:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.223 (still bad) 2010-Apr-01 02:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.224 (still bad) 2010-Apr-01 02:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.226 (still bad) 2010-Apr-01 02:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.231 (still bad) 2010-Apr-01 02:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.231 (still bad) 2010-Apr-01 02:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.231 (still bad) 2010-Apr-01 02:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.233 (still bad) 2010-Apr-01 02:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.230 (still bad) 2010-Apr-01 02:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.229 (still bad) 2010-Apr-01 02:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 02:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.222 (still bad) 2010-Apr-01 02:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.225 (still bad) 2010-Apr-01 02:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.224 (still bad) 2010-Apr-01 02:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.226 (still bad) 2010-Apr-01 02:20:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.375 < 0.75)! 2010-Apr-01 02:20:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.224 1.051 1.025 2010-Apr-01 02:20:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.375 1.186 1.176 1.018 2010-Apr-01 02:20:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.185 0.923 1.213 1.032 2010-Apr-01 02:20:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.935 1.081 1.088 2010-Apr-01 02:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.226 (still bad) 2010-Apr-01 02:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.225 (still bad) 2010-Apr-01 02:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.226 (still bad) 2010-Apr-01 02:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.228 (still bad) 2010-Apr-01 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.224 (still bad) 2010-Apr-01 02:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.224 (still bad) 2010-Apr-01 02:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.227 (still bad) 2010-Apr-01 02:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.223 (still bad) 2010-Apr-01 02:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.224 (still bad) 2010-Apr-01 02:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.223 (still bad) 2010-Apr-01 02:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.225 (still bad) 2010-Apr-01 02:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.227 (still bad) 2010-Apr-01 02:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.225 (still bad) 2010-Apr-01 02:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.226 (still bad) 2010-Apr-01 02:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.224 (still bad) 2010-Apr-01 02:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.228 (still bad) 2010-Apr-01 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.228 (still bad) 2010-Apr-01 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.232 (still bad) 2010-Apr-01 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.227 (still bad) 2010-Apr-01 02:21:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.381 < 0.75)! 2010-Apr-01 02:21:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.227 1.051 1.025 2010-Apr-01 02:21:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.381 1.193 1.173 1.019 2010-Apr-01 02:21:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.933 1.214 1.033 2010-Apr-01 02:21:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.932 1.065 1.084 2010-Apr-01 02:21:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:21:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:21:11 LOG5 end_task: Level: (3) ID = <10494> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:21:11 LOG5 end_task: Level: (2) ID = <10493> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 LOG1 fixed_driftmap: New position: year = 2010.2494128514211 RA = 14:59:07.1 RA/Dec = 14:59:37.3 +19:17:58.7 2010-Apr-01 02:21:11 NOTE fixed_driftmap: Correcting ZA to 6:34:00.0 ... 2010-Apr-01 02:21:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5666592470 -CF 2010-Apr-01 02:21:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:21:11 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:21:11 LOG5 begin_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:21:11 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:21:11 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:21:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:21:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:21:11 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:21:11 LOG5 begin_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5666592470 -CF 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:21:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:21:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:21:11 LOG5 end_task: Level: (4) ID = <10497> Status = 0 0 0 0 ok 2010-Apr-01 02:21:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:21:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:21:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:21:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:21:12 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:21:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:21:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:21:12 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:21:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:21:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:21:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:21:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:21:12 LOG5 begin_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:21:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:21:12 LOG5 end_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:21:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:21:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:21:12 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:21:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:21:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:21:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:21:12 LOG5 begin_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:21:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:21:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:21:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:21:12 LOG5 end_task: Level: (3) ID = <10500> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:21:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:21:12 LOG5 begin_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:21:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:21:12 INFO2 take_data: Starting WAPP 1-second scan: 9100028 2010-Apr-01 02:21:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:21:12 LOG5 begin_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-Apr-01 02:21:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.227 (still bad) 2010-Apr-01 02:21:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:21:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22873.00 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:21:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:21:14 LOG5 end_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:21:14 LOG5 end_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:21:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:21:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:21:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:21:14 LOG5 begin_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.496 and 1.676 (still bad) 2010-Apr-01 02:21:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:21:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:21:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:21:14 LOG5 end_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:21:14 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:21:14 LOG5 finish_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:21:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:21:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:21:14 LOG5 end_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Apr-01 02:21:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 43 of 99 2010-Apr-01 02:21:15 LOG4 send_obs_status: To obs_status: <1> LOOP 43 2010-Apr-01 02:21:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:21:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:21:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:21:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:21:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:21:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:21:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:21:15 LOG5 begin_task: Level: (2) ID = <10504> Status = 0 0 0 0 ok 2010-Apr-01 02:21:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:21:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:21:15 INFO2 take_data: Starting WAPP 600-second scan: 9100029 2010-Apr-01 02:21:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:21:15 LOG5 begin_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2010-Apr-01 02:21:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:21:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:21:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:21:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22876.00 2010-Apr-01 02:21:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0014.fits 2010-Apr-01 02:21:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0014.fits} 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:21:17 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Apr-01 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.227 (still bad) 2010-Apr-01 02:21:19 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Apr-01 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.227 (still bad) 2010-Apr-01 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.226 (still bad) 2010-Apr-01 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.228 (still bad) 2010-Apr-01 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.227 (still bad) 2010-Apr-01 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.225 (still bad) 2010-Apr-01 02:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.225 (still bad) 2010-Apr-01 02:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.226 (still bad) 2010-Apr-01 02:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.224 (still bad) 2010-Apr-01 02:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.225 (still bad) 2010-Apr-01 02:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.226 (still bad) 2010-Apr-01 02:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.226 (still bad) 2010-Apr-01 02:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.225 (still bad) 2010-Apr-01 02:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.224 (still bad) 2010-Apr-01 02:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.224 (still bad) 2010-Apr-01 02:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.225 (still bad) 2010-Apr-01 02:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.225 (still bad) 2010-Apr-01 02:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.226 (still bad) 2010-Apr-01 02:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.227 (still bad) 2010-Apr-01 02:22:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.374 < 0.75)! 2010-Apr-01 02:22:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.227 1.055 1.028 2010-Apr-01 02:22:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.374 1.190 1.176 1.022 2010-Apr-01 02:22:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.184 0.926 1.216 1.035 2010-Apr-01 02:22:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.929 1.067 1.080 2010-Apr-01 02:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.226 (still bad) 2010-Apr-01 02:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.226 (still bad) 2010-Apr-01 02:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.227 (still bad) 2010-Apr-01 02:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.228 (still bad) 2010-Apr-01 02:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.226 (still bad) 2010-Apr-01 02:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.226 (still bad) 2010-Apr-01 02:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.226 (still bad) 2010-Apr-01 02:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.227 (still bad) 2010-Apr-01 02:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.228 (still bad) 2010-Apr-01 02:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.236 (still bad) 2010-Apr-01 02:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.228 (still bad) 2010-Apr-01 02:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.227 (still bad) 2010-Apr-01 02:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.227 (still bad) 2010-Apr-01 02:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.228 (still bad) 2010-Apr-01 02:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.235 (still bad) 2010-Apr-01 02:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.230 (still bad) 2010-Apr-01 02:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.230 (still bad) 2010-Apr-01 02:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.227 (still bad) 2010-Apr-01 02:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.228 (still bad) 2010-Apr-01 02:23:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.373 < 0.75)! 2010-Apr-01 02:23:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.228 1.056 1.024 2010-Apr-01 02:23:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.373 1.192 1.177 1.024 2010-Apr-01 02:23:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.188 0.927 1.214 1.036 2010-Apr-01 02:23:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.929 1.071 1.080 2010-Apr-01 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.226 (still bad) 2010-Apr-01 02:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.227 (still bad) 2010-Apr-01 02:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.227 (still bad) 2010-Apr-01 02:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.228 (still bad) 2010-Apr-01 02:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.227 (still bad) 2010-Apr-01 02:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.229 (still bad) 2010-Apr-01 02:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.230 (still bad) 2010-Apr-01 02:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.229 (still bad) 2010-Apr-01 02:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.231 (still bad) 2010-Apr-01 02:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.230 (still bad) 2010-Apr-01 02:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.230 (still bad) 2010-Apr-01 02:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.228 (still bad) 2010-Apr-01 02:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.231 (still bad) 2010-Apr-01 02:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.228 (still bad) 2010-Apr-01 02:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.229 (still bad) 2010-Apr-01 02:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.233 (still bad) 2010-Apr-01 02:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.229 (still bad) 2010-Apr-01 02:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.230 (still bad) 2010-Apr-01 02:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.228 (still bad) 2010-Apr-01 02:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.230 (still bad) 2010-Apr-01 02:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.230 (still bad) 2010-Apr-01 02:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.228 (still bad) 2010-Apr-01 02:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.230 (still bad) 2010-Apr-01 02:24:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.396 < 0.75)! 2010-Apr-01 02:24:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.228 1.058 1.029 2010-Apr-01 02:24:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.396 1.193 1.177 1.022 2010-Apr-01 02:24:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.927 1.216 1.034 2010-Apr-01 02:24:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.931 1.077 1.083 2010-Apr-01 02:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.230 (still bad) 2010-Apr-01 02:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.230 (still bad) 2010-Apr-01 02:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.230 (still bad) 2010-Apr-01 02:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.225 (still bad) 2010-Apr-01 02:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.226 (still bad) 2010-Apr-01 02:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.227 (still bad) 2010-Apr-01 02:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.233 (still bad) 2010-Apr-01 02:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.227 (still bad) 2010-Apr-01 02:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.224 (still bad) 2010-Apr-01 02:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.228 (still bad) 2010-Apr-01 02:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.225 (still bad) 2010-Apr-01 02:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.227 (still bad) 2010-Apr-01 02:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.227 (still bad) 2010-Apr-01 02:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.224 (still bad) 2010-Apr-01 02:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.225 (still bad) 2010-Apr-01 02:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.226 (still bad) 2010-Apr-01 02:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.225 (still bad) 2010-Apr-01 02:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.231 (still bad) 2010-Apr-01 02:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.226 (still bad) 2010-Apr-01 02:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.226 (still bad) 2010-Apr-01 02:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.228 (still bad) 2010-Apr-01 02:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.226 (still bad) 2010-Apr-01 02:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.227 (still bad) 2010-Apr-01 02:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.231 (still bad) 2010-Apr-01 02:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.228 (still bad) 2010-Apr-01 02:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.226 (still bad) 2010-Apr-01 02:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.232 (still bad) 2010-Apr-01 02:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.227 (still bad) 2010-Apr-01 02:25:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 02:25:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.228 1.056 1.025 2010-Apr-01 02:25:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.191 1.173 1.024 2010-Apr-01 02:25:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.187 0.930 1.215 1.034 2010-Apr-01 02:25:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.928 1.072 1.081 2010-Apr-01 02:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.232 (still bad) 2010-Apr-01 02:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.229 (still bad) 2010-Apr-01 02:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.226 (still bad) 2010-Apr-01 02:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.229 (still bad) 2010-Apr-01 02:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.229 (still bad) 2010-Apr-01 02:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.230 (still bad) 2010-Apr-01 02:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.236 (still bad) 2010-Apr-01 02:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.228 (still bad) 2010-Apr-01 02:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.231 (still bad) 2010-Apr-01 02:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.229 (still bad) 2010-Apr-01 02:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.230 (still bad) 2010-Apr-01 02:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.229 (still bad) 2010-Apr-01 02:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.237 (still bad) 2010-Apr-01 02:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.230 (still bad) 2010-Apr-01 02:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.229 (still bad) 2010-Apr-01 02:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.235 (still bad) 2010-Apr-01 02:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.232 (still bad) 2010-Apr-01 02:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.241 (still bad) 2010-Apr-01 02:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.231 (still bad) 2010-Apr-01 02:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.232 (still bad) 2010-Apr-01 02:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.232 (still bad) 2010-Apr-01 02:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.232 (still bad) 2010-Apr-01 02:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.234 (still bad) 2010-Apr-01 02:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.233 (still bad) 2010-Apr-01 02:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.232 (still bad) 2010-Apr-01 02:26:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.376 < 0.75)! 2010-Apr-01 02:26:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.231 1.055 1.031 2010-Apr-01 02:26:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.376 1.201 1.173 1.027 2010-Apr-01 02:26:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.183 0.933 1.215 1.037 2010-Apr-01 02:26:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.931 1.072 1.083 2010-Apr-01 02:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.233 (still bad) 2010-Apr-01 02:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.232 (still bad) 2010-Apr-01 02:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.233 (still bad) 2010-Apr-01 02:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.231 (still bad) 2010-Apr-01 02:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.231 (still bad) 2010-Apr-01 02:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.237 (still bad) 2010-Apr-01 02:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.234 (still bad) 2010-Apr-01 02:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.234 (still bad) 2010-Apr-01 02:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.236 (still bad) 2010-Apr-01 02:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.235 (still bad) 2010-Apr-01 02:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.235 (still bad) 2010-Apr-01 02:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.238 (still bad) 2010-Apr-01 02:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.237 (still bad) 2010-Apr-01 02:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.234 (still bad) 2010-Apr-01 02:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.244 (still bad) 2010-Apr-01 02:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.248 (still bad) 2010-Apr-01 02:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.253 (still bad) 2010-Apr-01 02:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.264 (still bad) 2010-Apr-01 02:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.268 (still bad) 2010-Apr-01 02:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.273 (still bad) 2010-Apr-01 02:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.277 (still bad) 2010-Apr-01 02:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.275 (still bad) 2010-Apr-01 02:27:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.380 < 0.75)! 2010-Apr-01 02:27:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.273 1.056 1.032 2010-Apr-01 02:27:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.380 1.199 1.174 1.028 2010-Apr-01 02:27:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.937 1.219 1.046 2010-Apr-01 02:27:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.938 1.076 1.085 2010-Apr-01 02:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.268 (still bad) 2010-Apr-01 02:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.262 (still bad) 2010-Apr-01 02:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.257 (still bad) 2010-Apr-01 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.252 (still bad) 2010-Apr-01 02:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.247 (still bad) 2010-Apr-01 02:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.246 (still bad) 2010-Apr-01 02:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.248 (still bad) 2010-Apr-01 02:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.246 (still bad) 2010-Apr-01 02:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.247 (still bad) 2010-Apr-01 02:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.245 (still bad) 2010-Apr-01 02:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.244 (still bad) 2010-Apr-01 02:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.245 (still bad) 2010-Apr-01 02:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.240 (still bad) 2010-Apr-01 02:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.240 (still bad) 2010-Apr-01 02:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.243 (still bad) 2010-Apr-01 02:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.241 (still bad) 2010-Apr-01 02:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.242 (still bad) 2010-Apr-01 02:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.247 (still bad) 2010-Apr-01 02:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.244 (still bad) 2010-Apr-01 02:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.241 (still bad) 2010-Apr-01 02:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.244 (still bad) 2010-Apr-01 02:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.240 (still bad) 2010-Apr-01 02:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.235 (still bad) 2010-Apr-01 02:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.238 (still bad) 2010-Apr-01 02:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.235 (still bad) 2010-Apr-01 02:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.235 (still bad) 2010-Apr-01 02:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.236 (still bad) 2010-Apr-01 02:28:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 02:28:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.234 1.057 1.030 2010-Apr-01 02:28:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.194 1.177 1.029 2010-Apr-01 02:28:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.933 1.215 1.042 2010-Apr-01 02:28:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.958 1.100 1.114 2010-Apr-01 02:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.235 (still bad) 2010-Apr-01 02:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.236 (still bad) 2010-Apr-01 02:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.232 (still bad) 2010-Apr-01 02:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.233 (still bad) 2010-Apr-01 02:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.240 (still bad) 2010-Apr-01 02:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.232 (still bad) 2010-Apr-01 02:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.234 (still bad) 2010-Apr-01 02:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.233 (still bad) 2010-Apr-01 02:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.231 (still bad) 2010-Apr-01 02:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.234 (still bad) 2010-Apr-01 02:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.234 (still bad) 2010-Apr-01 02:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.234 (still bad) 2010-Apr-01 02:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.232 (still bad) 2010-Apr-01 02:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.229 (still bad) 2010-Apr-01 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.232 (still bad) 2010-Apr-01 02:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.233 (still bad) 2010-Apr-01 02:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.233 (still bad) 2010-Apr-01 02:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.231 (still bad) 2010-Apr-01 02:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.233 (still bad) 2010-Apr-01 02:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.236 (still bad) 2010-Apr-01 02:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.236 (still bad) 2010-Apr-01 02:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.234 (still bad) 2010-Apr-01 02:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.233 (still bad) 2010-Apr-01 02:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.231 (still bad) 2010-Apr-01 02:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.229 (still bad) 2010-Apr-01 02:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.234 (still bad) 2010-Apr-01 02:29:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.368 < 0.75)! 2010-Apr-01 02:29:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.233 1.057 1.035 2010-Apr-01 02:29:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.368 1.199 1.175 1.027 2010-Apr-01 02:29:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.190 0.935 1.214 1.039 2010-Apr-01 02:29:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.931 1.072 1.083 2010-Apr-01 02:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.234 (still bad) 2010-Apr-01 02:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.235 (still bad) 2010-Apr-01 02:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.234 (still bad) 2010-Apr-01 02:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.237 (still bad) 2010-Apr-01 02:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.240 (still bad) 2010-Apr-01 02:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.237 (still bad) 2010-Apr-01 02:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.236 (still bad) 2010-Apr-01 02:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.237 (still bad) 2010-Apr-01 02:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.236 (still bad) 2010-Apr-01 02:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.235 (still bad) 2010-Apr-01 02:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.243 (still bad) 2010-Apr-01 02:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.237 (still bad) 2010-Apr-01 02:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.239 (still bad) 2010-Apr-01 02:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.241 (still bad) 2010-Apr-01 02:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.244 (still bad) 2010-Apr-01 02:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.233 (still bad) 2010-Apr-01 02:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.234 (still bad) 2010-Apr-01 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.241 (still bad) 2010-Apr-01 02:30:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.366 < 0.75)! 2010-Apr-01 02:30:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.237 1.057 1.034 2010-Apr-01 02:30:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.366 1.197 1.179 1.028 2010-Apr-01 02:30:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.185 0.933 1.212 1.041 2010-Apr-01 02:30:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.937 1.075 1.091 2010-Apr-01 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.239 (still bad) 2010-Apr-01 02:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.237 (still bad) 2010-Apr-01 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.236 (still bad) 2010-Apr-01 02:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.237 (still bad) 2010-Apr-01 02:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.235 (still bad) 2010-Apr-01 02:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.238 (still bad) 2010-Apr-01 02:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.239 (still bad) 2010-Apr-01 02:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.243 (still bad) 2010-Apr-01 02:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.239 (still bad) 2010-Apr-01 02:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.237 (still bad) 2010-Apr-01 02:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.240 (still bad) 2010-Apr-01 02:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.365 and 1.238 (still bad) 2010-Apr-01 02:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.238 (still bad) 2010-Apr-01 02:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.240 (still bad) 2010-Apr-01 02:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.234 (still bad) 2010-Apr-01 02:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.234 (still bad) 2010-Apr-01 02:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.233 (still bad) 2010-Apr-01 02:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.230 (still bad) 2010-Apr-01 02:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.232 (still bad) 2010-Apr-01 02:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.234 (still bad) 2010-Apr-01 02:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.237 (still bad) 2010-Apr-01 02:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.235 (still bad) 2010-Apr-01 02:31:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:31:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:31:16 LOG5 end_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2010-Apr-01 02:31:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:31:16 LOG5 end_task: Level: (2) ID = <10504> Status = 0 0 0 0 ok 2010-Apr-01 02:31:16 LOG1 fixed_driftmap: New position: year = 2010.249432022714 RA = 15:09:17.4 RA/Dec = 15:09:47.4 +19:18:05.1 2010-Apr-01 02:31:16 NOTE fixed_driftmap: Correcting ZA to 6:34:51.7 ... 2010-Apr-01 02:31:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5810187900 -CF 2010-Apr-01 02:31:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:31:16 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:31:16 LOG5 begin_task: Level: (2) ID = <10506> Status = 0 0 0 0 ok 2010-Apr-01 02:31:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:31:16 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:31:16 LOG5 begin_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2010-Apr-01 02:31:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:31:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:31:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:31:16 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:31:16 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5810187900 -CF 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.237 (still bad) 2010-Apr-01 02:31:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:31:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:31:16 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:31:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:31:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:31:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:31:17 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:31:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:31:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:31:17 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:31:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:31:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:31:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:31:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:31:17 LOG5 begin_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:31:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:31:17 LOG5 end_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:31:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:31:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:31:17 LOG5 end_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:31:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:31:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:31:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:31:17 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:31:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:31:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:31:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:31:17 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:31:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:31:17 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:31:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:31:17 INFO2 take_data: Starting WAPP 1-second scan: 9100030 2010-Apr-01 02:31:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:31:17 LOG5 begin_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-Apr-01 02:31:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:31:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:31:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23478.00 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:31:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:31:19 LOG5 end_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:31:19 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:31:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:31:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:31:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:31:19 LOG5 begin_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:31:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:31:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:31:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:31:19 LOG5 end_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:31:19 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:31:19 LOG5 finish_task: Level: (2) ID = <10506> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:31:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:31:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:31:19 LOG5 end_task: Level: (2) ID = <10506> Status = 0 0 0 0 ok 2010-Apr-01 02:31:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 44 of 99 2010-Apr-01 02:31:19 LOG4 send_obs_status: To obs_status: <1> LOOP 44 2010-Apr-01 02:31:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:31:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:31:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:31:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:31:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:31:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:31:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:31:20 LOG5 begin_task: Level: (2) ID = <10515> Status = 0 0 0 0 ok 2010-Apr-01 02:31:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:31:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:31:20 INFO2 take_data: Starting WAPP 600-second scan: 9100031 2010-Apr-01 02:31:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:31:20 LOG5 begin_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-Apr-01 02:31:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.488 and 1.692 (still bad) 2010-Apr-01 02:31:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:31:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:31:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23481.00 2010-Apr-01 02:31:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0015.fits 2010-Apr-01 02:31:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0015.fits} 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.656 (still bad) 2010-Apr-01 02:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:31:22 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Apr-01 02:31:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.375 < 0.75)! 2010-Apr-01 02:31:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.238 1.054 1.034 2010-Apr-01 02:31:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.375 1.199 1.184 1.032 2010-Apr-01 02:31:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.933 1.216 1.040 2010-Apr-01 02:31:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.941 1.077 1.095 2010-Apr-01 02:31:25 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Apr-01 02:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.235 (still bad) 2010-Apr-01 02:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.235 (still bad) 2010-Apr-01 02:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:31:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:31:31.303 (seconds: 9091.303)!} 2010-Apr-01 02:31:31 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:31:31.303 (seconds: 9091.303)! 2010-Apr-01 02:31:32 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 9090.0 to 9091.0! 2010-Apr-01 02:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:31:33 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (9090.0 - 9092.0)! 2010-Apr-01 02:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.238 (still bad) 2010-Apr-01 02:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.238 (still bad) 2010-Apr-01 02:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.237 (still bad) 2010-Apr-01 02:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.240 (still bad) 2010-Apr-01 02:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.236 (still bad) 2010-Apr-01 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.237 (still bad) 2010-Apr-01 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.235 (still bad) 2010-Apr-01 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.235 (still bad) 2010-Apr-01 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.233 (still bad) 2010-Apr-01 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.239 (still bad) 2010-Apr-01 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:32:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.374 < 0.75)! 2010-Apr-01 02:32:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.238 1.056 1.030 2010-Apr-01 02:32:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.374 1.193 1.176 1.026 2010-Apr-01 02:32:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.189 0.933 1.213 1.042 2010-Apr-01 02:32:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.934 1.072 1.085 2010-Apr-01 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.239 (still bad) 2010-Apr-01 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.243 (still bad) 2010-Apr-01 02:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.240 (still bad) 2010-Apr-01 02:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.241 (still bad) 2010-Apr-01 02:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.241 (still bad) 2010-Apr-01 02:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.239 (still bad) 2010-Apr-01 02:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.239 (still bad) 2010-Apr-01 02:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.244 (still bad) 2010-Apr-01 02:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.236 (still bad) 2010-Apr-01 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.237 (still bad) 2010-Apr-01 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.236 (still bad) 2010-Apr-01 02:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.234 (still bad) 2010-Apr-01 02:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.230 (still bad) 2010-Apr-01 02:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.236 (still bad) 2010-Apr-01 02:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.236 (still bad) 2010-Apr-01 02:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.233 (still bad) 2010-Apr-01 02:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.236 (still bad) 2010-Apr-01 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.242 (still bad) 2010-Apr-01 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:33:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.371 < 0.75)! 2010-Apr-01 02:33:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.238 1.058 1.029 2010-Apr-01 02:33:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.371 1.194 1.179 1.027 2010-Apr-01 02:33:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.192 0.936 1.214 1.040 2010-Apr-01 02:33:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.935 1.073 1.084 2010-Apr-01 02:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.238 (still bad) 2010-Apr-01 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.243 (still bad) 2010-Apr-01 02:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.235 (still bad) 2010-Apr-01 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.236 (still bad) 2010-Apr-01 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.243 (still bad) 2010-Apr-01 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.238 (still bad) 2010-Apr-01 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.238 (still bad) 2010-Apr-01 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.237 (still bad) 2010-Apr-01 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.244 (still bad) 2010-Apr-01 02:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.237 (still bad) 2010-Apr-01 02:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.238 (still bad) 2010-Apr-01 02:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.237 (still bad) 2010-Apr-01 02:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.242 (still bad) 2010-Apr-01 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.238 (still bad) 2010-Apr-01 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.236 (still bad) 2010-Apr-01 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.238 (still bad) 2010-Apr-01 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.237 (still bad) 2010-Apr-01 02:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.241 (still bad) 2010-Apr-01 02:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.240 (still bad) 2010-Apr-01 02:34:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.377 < 0.75)! 2010-Apr-01 02:34:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.241 1.056 1.032 2010-Apr-01 02:34:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.377 1.198 1.179 1.030 2010-Apr-01 02:34:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.189 0.934 1.218 1.042 2010-Apr-01 02:34:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.935 1.073 1.087 2010-Apr-01 02:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.238 (still bad) 2010-Apr-01 02:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.238 (still bad) 2010-Apr-01 02:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.238 (still bad) 2010-Apr-01 02:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.238 (still bad) 2010-Apr-01 02:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.241 (still bad) 2010-Apr-01 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.242 (still bad) 2010-Apr-01 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.243 (still bad) 2010-Apr-01 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.241 (still bad) 2010-Apr-01 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.243 (still bad) 2010-Apr-01 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.240 (still bad) 2010-Apr-01 02:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.238 (still bad) 2010-Apr-01 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.239 (still bad) 2010-Apr-01 02:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.239 (still bad) 2010-Apr-01 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.239 (still bad) 2010-Apr-01 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.240 (still bad) 2010-Apr-01 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.239 (still bad) 2010-Apr-01 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.238 (still bad) 2010-Apr-01 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.240 (still bad) 2010-Apr-01 02:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.241 (still bad) 2010-Apr-01 02:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.241 (still bad) 2010-Apr-01 02:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.240 (still bad) 2010-Apr-01 02:35:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.369 < 0.75)! 2010-Apr-01 02:35:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.240 1.062 1.033 2010-Apr-01 02:35:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.369 1.196 1.180 1.030 2010-Apr-01 02:35:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.190 0.938 1.222 1.054 2010-Apr-01 02:35:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.935 1.078 1.088 2010-Apr-01 02:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.239 (still bad) 2010-Apr-01 02:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.240 (still bad) 2010-Apr-01 02:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.242 (still bad) 2010-Apr-01 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.239 (still bad) 2010-Apr-01 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.241 (still bad) 2010-Apr-01 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.241 (still bad) 2010-Apr-01 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.239 (still bad) 2010-Apr-01 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.237 (still bad) 2010-Apr-01 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.239 (still bad) 2010-Apr-01 02:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.238 (still bad) 2010-Apr-01 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.244 (still bad) 2010-Apr-01 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.241 (still bad) 2010-Apr-01 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.242 (still bad) 2010-Apr-01 02:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.242 (still bad) 2010-Apr-01 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.241 (still bad) 2010-Apr-01 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.243 (still bad) 2010-Apr-01 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.249 (still bad) 2010-Apr-01 02:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.243 (still bad) 2010-Apr-01 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.367 and 1.241 (still bad) 2010-Apr-01 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.245 (still bad) 2010-Apr-01 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.250 (still bad) 2010-Apr-01 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.245 (still bad) 2010-Apr-01 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.244 (still bad) 2010-Apr-01 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.244 (still bad) 2010-Apr-01 02:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.241 (still bad) 2010-Apr-01 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.241 (still bad) 2010-Apr-01 02:36:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.372 < 0.75)! 2010-Apr-01 02:36:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.245 1.068 1.039 2010-Apr-01 02:36:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.372 1.200 1.186 1.034 2010-Apr-01 02:36:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.200 0.940 1.226 1.051 2010-Apr-01 02:36:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.942 1.085 1.096 2010-Apr-01 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.239 (still bad) 2010-Apr-01 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.236 (still bad) 2010-Apr-01 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.243 (still bad) 2010-Apr-01 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.239 (still bad) 2010-Apr-01 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.240 (still bad) 2010-Apr-01 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.239 (still bad) 2010-Apr-01 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.236 (still bad) 2010-Apr-01 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.238 (still bad) 2010-Apr-01 02:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.244 (still bad) 2010-Apr-01 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.238 (still bad) 2010-Apr-01 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.238 (still bad) 2010-Apr-01 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.239 (still bad) 2010-Apr-01 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.239 (still bad) 2010-Apr-01 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.238 (still bad) 2010-Apr-01 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.246 (still bad) 2010-Apr-01 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.240 (still bad) 2010-Apr-01 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.238 (still bad) 2010-Apr-01 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.238 (still bad) 2010-Apr-01 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.245 (still bad) 2010-Apr-01 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.236 (still bad) 2010-Apr-01 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.240 (still bad) 2010-Apr-01 02:37:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.381 < 0.75)! 2010-Apr-01 02:37:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.244 1.066 1.040 2010-Apr-01 02:37:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.381 1.205 1.184 1.034 2010-Apr-01 02:37:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.196 0.938 1.220 1.042 2010-Apr-01 02:37:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.939 1.087 1.094 2010-Apr-01 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.240 (still bad) 2010-Apr-01 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.239 (still bad) 2010-Apr-01 02:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.239 (still bad) 2010-Apr-01 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.240 (still bad) 2010-Apr-01 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.242 (still bad) 2010-Apr-01 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.238 (still bad) 2010-Apr-01 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.246 (still bad) 2010-Apr-01 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.242 (still bad) 2010-Apr-01 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.241 (still bad) 2010-Apr-01 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.243 (still bad) 2010-Apr-01 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.243 (still bad) 2010-Apr-01 02:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.240 (still bad) 2010-Apr-01 02:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.238 (still bad) 2010-Apr-01 02:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.241 (still bad) 2010-Apr-01 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.238 (still bad) 2010-Apr-01 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.243 (still bad) 2010-Apr-01 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.244 (still bad) 2010-Apr-01 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.242 (still bad) 2010-Apr-01 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.244 (still bad) 2010-Apr-01 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.243 (still bad) 2010-Apr-01 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.244 (still bad) 2010-Apr-01 02:38:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.373 < 0.75)! 2010-Apr-01 02:38:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.248 1.062 1.041 2010-Apr-01 02:38:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.373 1.205 1.185 1.038 2010-Apr-01 02:38:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.198 0.943 1.224 1.049 2010-Apr-01 02:38:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.946 1.086 1.100 2010-Apr-01 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.244 (still bad) 2010-Apr-01 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.245 (still bad) 2010-Apr-01 02:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.244 (still bad) 2010-Apr-01 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.241 (still bad) 2010-Apr-01 02:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.243 (still bad) 2010-Apr-01 02:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.248 (still bad) 2010-Apr-01 02:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.243 (still bad) 2010-Apr-01 02:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.246 (still bad) 2010-Apr-01 02:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.246 (still bad) 2010-Apr-01 02:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.244 (still bad) 2010-Apr-01 02:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.245 (still bad) 2010-Apr-01 02:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.250 (still bad) 2010-Apr-01 02:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.246 (still bad) 2010-Apr-01 02:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.246 (still bad) 2010-Apr-01 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.246 (still bad) 2010-Apr-01 02:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.248 (still bad) 2010-Apr-01 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.247 (still bad) 2010-Apr-01 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.252 (still bad) 2010-Apr-01 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.245 (still bad) 2010-Apr-01 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.366 and 1.248 (still bad) 2010-Apr-01 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.252 (still bad) 2010-Apr-01 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.252 (still bad) 2010-Apr-01 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.252 (still bad) 2010-Apr-01 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.252 (still bad) 2010-Apr-01 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.253 (still bad) 2010-Apr-01 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.252 (still bad) 2010-Apr-01 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.250 (still bad) 2010-Apr-01 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.250 (still bad) 2010-Apr-01 02:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.250 (still bad) 2010-Apr-01 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.253 (still bad) 2010-Apr-01 02:39:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.377 < 0.75)! 2010-Apr-01 02:39:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.251 1.057 1.036 2010-Apr-01 02:39:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.377 1.207 1.176 1.034 2010-Apr-01 02:39:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.191 0.938 1.215 1.046 2010-Apr-01 02:39:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.943 1.083 1.097 2010-Apr-01 02:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.251 (still bad) 2010-Apr-01 02:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.245 (still bad) 2010-Apr-01 02:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.248 (still bad) 2010-Apr-01 02:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.248 (still bad) 2010-Apr-01 02:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.247 (still bad) 2010-Apr-01 02:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.247 (still bad) 2010-Apr-01 02:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.248 (still bad) 2010-Apr-01 02:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.247 (still bad) 2010-Apr-01 02:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.246 (still bad) 2010-Apr-01 02:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.253 (still bad) 2010-Apr-01 02:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.248 (still bad) 2010-Apr-01 02:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.246 (still bad) 2010-Apr-01 02:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.246 (still bad) 2010-Apr-01 02:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.245 (still bad) 2010-Apr-01 02:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.245 (still bad) 2010-Apr-01 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.250 (still bad) 2010-Apr-01 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.245 (still bad) 2010-Apr-01 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.246 (still bad) 2010-Apr-01 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.248 (still bad) 2010-Apr-01 02:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.247 (still bad) 2010-Apr-01 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.248 (still bad) 2010-Apr-01 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.248 (still bad) 2010-Apr-01 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.250 (still bad) 2010-Apr-01 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.250 (still bad) 2010-Apr-01 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.249 (still bad) 2010-Apr-01 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.248 (still bad) 2010-Apr-01 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.249 (still bad) 2010-Apr-01 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.247 (still bad) 2010-Apr-01 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.247 (still bad) 2010-Apr-01 02:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.247 (still bad) 2010-Apr-01 02:40:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.375 < 0.75)! 2010-Apr-01 02:40:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.247 1.055 1.040 2010-Apr-01 02:40:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.375 1.199 1.181 1.034 2010-Apr-01 02:40:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.191 0.941 1.216 1.049 2010-Apr-01 02:40:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.944 1.079 1.097 2010-Apr-01 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.248 (still bad) 2010-Apr-01 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.245 (still bad) 2010-Apr-01 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.247 (still bad) 2010-Apr-01 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.245 (still bad) 2010-Apr-01 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.244 (still bad) 2010-Apr-01 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.243 (still bad) 2010-Apr-01 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.243 (still bad) 2010-Apr-01 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.241 (still bad) 2010-Apr-01 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.241 (still bad) 2010-Apr-01 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.241 (still bad) 2010-Apr-01 02:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.241 (still bad) 2010-Apr-01 02:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.242 (still bad) 2010-Apr-01 02:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.243 (still bad) 2010-Apr-01 02:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.241 (still bad) 2010-Apr-01 02:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.242 (still bad) 2010-Apr-01 02:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.242 (still bad) 2010-Apr-01 02:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.243 (still bad) 2010-Apr-01 02:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.242 (still bad) 2010-Apr-01 02:41:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:41:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:41:21 LOG5 end_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-Apr-01 02:41:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:41:21 LOG5 end_task: Level: (2) ID = <10515> Status = 0 0 0 0 ok 2010-Apr-01 02:41:21 LOG1 fixed_driftmap: New position: year = 2010.2494511940072 RA = 15:19:27.9 RA/Dec = 15:19:57.7 +19:18:11.9 2010-Apr-01 02:41:21 NOTE fixed_driftmap: Correcting ZA to 6:35:45.8 ... 2010-Apr-01 02:41:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.5960485808 -CF 2010-Apr-01 02:41:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:41:21 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:41:21 LOG5 begin_task: Level: (2) ID = <10517> Status = 0 0 0 0 ok 2010-Apr-01 02:41:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:41:21 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:41:21 LOG5 begin_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-Apr-01 02:41:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:41:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:41:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:41:21 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:41:21 LOG5 begin_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.5960485808 -CF 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:41:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:41:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:41:21 LOG5 end_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:41:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:41:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:41:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:41:22 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:41:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:41:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:41:22 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:41:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:41:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:41:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:41:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:41:22 LOG5 begin_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:41:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:41:22 LOG5 end_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:41:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:41:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:41:22 LOG5 end_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:41:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:41:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:41:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:41:22 LOG5 begin_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:41:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:41:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:41:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:41:22 LOG5 end_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:41:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:41:22 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:41:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:41:22 INFO2 take_data: Starting WAPP 1-second scan: 9100032 2010-Apr-01 02:41:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:41:22 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-Apr-01 02:41:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:41:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:41:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24083.00 2010-Apr-01 02:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.242 (still bad) 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:41:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:41:24 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-Apr-01 02:41:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:41:24 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-Apr-01 02:41:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:41:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:41:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:41:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:41:24 LOG5 begin_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-Apr-01 02:41:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:41:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:41:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:41:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:41:24 LOG5 end_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-Apr-01 02:41:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:41:24 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:41:24 LOG5 finish_task: Level: (2) ID = <10517> Status = 0 0 0 0 ok 2010-Apr-01 02:41:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:41:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:41:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:41:24 LOG5 end_task: Level: (2) ID = <10517> Status = 0 0 0 0 ok 2010-Apr-01 02:41:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 45 of 99 2010-Apr-01 02:41:25 LOG4 send_obs_status: To obs_status: <1> LOOP 45 2010-Apr-01 02:41:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:41:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:41:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:41:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:41:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:41:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:41:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:41:25 LOG5 begin_task: Level: (2) ID = <10526> Status = 0 0 0 0 ok 2010-Apr-01 02:41:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:41:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:41:25 INFO2 take_data: Starting WAPP 600-second scan: 9100033 2010-Apr-01 02:41:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:41:25 LOG5 begin_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-Apr-01 02:41:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:41:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.489 and 1.692 (still bad) 2010-Apr-01 02:41:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:41:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24086.00 2010-Apr-01 02:41:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0016.fits 2010-Apr-01 02:41:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0016.fits} 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.654 (still bad) 2010-Apr-01 02:41:27 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Apr-01 02:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.252 (still bad) 2010-Apr-01 02:41:30 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Apr-01 02:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.253 (still bad) 2010-Apr-01 02:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.257 (still bad) 2010-Apr-01 02:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.255 (still bad) 2010-Apr-01 02:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.254 (still bad) 2010-Apr-01 02:41:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.377 < 0.75)! 2010-Apr-01 02:41:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.251 1.056 1.039 2010-Apr-01 02:41:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.377 1.196 1.182 1.030 2010-Apr-01 02:41:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.192 0.934 1.223 1.048 2010-Apr-01 02:41:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.945 1.088 1.098 2010-Apr-01 02:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.249 (still bad) 2010-Apr-01 02:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.245 (still bad) 2010-Apr-01 02:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.245 (still bad) 2010-Apr-01 02:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.238 (still bad) 2010-Apr-01 02:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.235 (still bad) 2010-Apr-01 02:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.240 (still bad) 2010-Apr-01 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.235 (still bad) 2010-Apr-01 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.234 (still bad) 2010-Apr-01 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.235 (still bad) 2010-Apr-01 02:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.235 (still bad) 2010-Apr-01 02:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.239 (still bad) 2010-Apr-01 02:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.234 (still bad) 2010-Apr-01 02:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.234 (still bad) 2010-Apr-01 02:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.234 (still bad) 2010-Apr-01 02:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.234 (still bad) 2010-Apr-01 02:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.235 (still bad) 2010-Apr-01 02:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.235 (still bad) 2010-Apr-01 02:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.233 (still bad) 2010-Apr-01 02:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.236 (still bad) 2010-Apr-01 02:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.242 (still bad) 2010-Apr-01 02:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.237 (still bad) 2010-Apr-01 02:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:42:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.379 < 0.75)! 2010-Apr-01 02:42:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.240 1.057 1.034 2010-Apr-01 02:42:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.379 1.198 1.176 1.030 2010-Apr-01 02:42:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.190 0.936 1.220 1.043 2010-Apr-01 02:42:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.941 1.083 1.094 2010-Apr-01 02:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.236 (still bad) 2010-Apr-01 02:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.237 (still bad) 2010-Apr-01 02:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.236 (still bad) 2010-Apr-01 02:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.237 (still bad) 2010-Apr-01 02:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.238 (still bad) 2010-Apr-01 02:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.235 (still bad) 2010-Apr-01 02:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.236 (still bad) 2010-Apr-01 02:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.234 (still bad) 2010-Apr-01 02:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.237 (still bad) 2010-Apr-01 02:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.236 (still bad) 2010-Apr-01 02:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.236 (still bad) 2010-Apr-01 02:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.239 (still bad) 2010-Apr-01 02:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.234 (still bad) 2010-Apr-01 02:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.235 (still bad) 2010-Apr-01 02:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.236 (still bad) 2010-Apr-01 02:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.237 (still bad) 2010-Apr-01 02:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.236 (still bad) 2010-Apr-01 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.238 (still bad) 2010-Apr-01 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.235 (still bad) 2010-Apr-01 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.236 (still bad) 2010-Apr-01 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.236 (still bad) 2010-Apr-01 02:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.234 (still bad) 2010-Apr-01 02:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.235 (still bad) 2010-Apr-01 02:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.237 (still bad) 2010-Apr-01 02:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.235 (still bad) 2010-Apr-01 02:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.234 (still bad) 2010-Apr-01 02:43:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.373 < 0.75)! 2010-Apr-01 02:43:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 1.234 1.058 1.029 2010-Apr-01 02:43:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.373 1.194 1.175 1.030 2010-Apr-01 02:43:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.188 0.935 1.217 1.042 2010-Apr-01 02:43:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.955 1.098 1.111 2010-Apr-01 02:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.237 (still bad) 2010-Apr-01 02:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.235 (still bad) 2010-Apr-01 02:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.233 (still bad) 2010-Apr-01 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.234 (still bad) 2010-Apr-01 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.236 (still bad) 2010-Apr-01 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.235 (still bad) 2010-Apr-01 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.236 (still bad) 2010-Apr-01 02:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.371 and 1.236 (still bad) 2010-Apr-01 02:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.235 (still bad) 2010-Apr-01 02:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.368 and 1.235 (still bad) 2010-Apr-01 02:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.362 and 1.235 (still bad) 2010-Apr-01 02:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.237 (still bad) 2010-Apr-01 02:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.238 (still bad) 2010-Apr-01 02:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.234 (still bad) 2010-Apr-01 02:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.236 (still bad) 2010-Apr-01 02:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.376 and 1.239 (still bad) 2010-Apr-01 02:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.240 (still bad) 2010-Apr-01 02:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.240 (still bad) 2010-Apr-01 02:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.373 and 1.239 (still bad) 2010-Apr-01 02:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.240 (still bad) 2010-Apr-01 02:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.237 (still bad) 2010-Apr-01 02:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.237 (still bad) 2010-Apr-01 02:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.247 (still bad) 2010-Apr-01 02:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.377 and 1.241 (still bad) 2010-Apr-01 02:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.239 (still bad) 2010-Apr-01 02:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.240 (still bad) 2010-Apr-01 02:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.241 (still bad) 2010-Apr-01 02:44:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.376 < 0.75)! 2010-Apr-01 02:44:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.238 1.059 1.036 2010-Apr-01 02:44:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.376 1.203 1.179 1.031 2010-Apr-01 02:44:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.189 0.938 1.220 1.044 2010-Apr-01 02:44:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.938 1.085 1.090 2010-Apr-01 02:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.374 and 1.246 (still bad) 2010-Apr-01 02:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.369 and 1.238 (still bad) 2010-Apr-01 02:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.236 (still bad) 2010-Apr-01 02:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.370 and 1.242 (still bad) 2010-Apr-01 02:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.372 and 1.239 (still bad) 2010-Apr-01 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.378 and 1.239 (still bad) 2010-Apr-01 02:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.244 (still bad) 2010-Apr-01 02:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.379 and 1.240 (still bad) 2010-Apr-01 02:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.237 (still bad) 2010-Apr-01 02:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.241 (still bad) 2010-Apr-01 02:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.238 (still bad) 2010-Apr-01 02:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.239 (still bad) 2010-Apr-01 02:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.244 (still bad) 2010-Apr-01 02:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.240 (still bad) 2010-Apr-01 02:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.239 (still bad) 2010-Apr-01 02:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.243 (still bad) 2010-Apr-01 02:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.241 (still bad) 2010-Apr-01 02:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.240 (still bad) 2010-Apr-01 02:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.244 (still bad) 2010-Apr-01 02:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.241 (still bad) 2010-Apr-01 02:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.239 (still bad) 2010-Apr-01 02:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.241 (still bad) 2010-Apr-01 02:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.241 (still bad) 2010-Apr-01 02:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.240 (still bad) 2010-Apr-01 02:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.246 (still bad) 2010-Apr-01 02:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.243 (still bad) 2010-Apr-01 02:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.253 (still bad) 2010-Apr-01 02:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.265 (still bad) 2010-Apr-01 02:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.263 (still bad) 2010-Apr-01 02:45:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.391 < 0.75)! 2010-Apr-01 02:45:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.971 1.245 1.060 1.032 2010-Apr-01 02:45:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.391 1.203 1.259 1.096 2010-Apr-01 02:45:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.194 0.941 1.217 1.047 2010-Apr-01 02:45:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.939 1.085 1.092 2010-Apr-01 02:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.250 (still bad) 2010-Apr-01 02:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.243 (still bad) 2010-Apr-01 02:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.242 (still bad) 2010-Apr-01 02:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.242 (still bad) 2010-Apr-01 02:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.240 (still bad) 2010-Apr-01 02:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.240 (still bad) 2010-Apr-01 02:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.243 (still bad) 2010-Apr-01 02:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.243 (still bad) 2010-Apr-01 02:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.238 (still bad) 2010-Apr-01 02:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.241 (still bad) 2010-Apr-01 02:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.238 (still bad) 2010-Apr-01 02:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.238 (still bad) 2010-Apr-01 02:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.240 (still bad) 2010-Apr-01 02:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.237 (still bad) 2010-Apr-01 02:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.237 (still bad) 2010-Apr-01 02:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.238 (still bad) 2010-Apr-01 02:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.244 (still bad) 2010-Apr-01 02:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.254 (still bad) 2010-Apr-01 02:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.268 (still bad) 2010-Apr-01 02:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.375 and 1.267 (still bad) 2010-Apr-01 02:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.267 (still bad) 2010-Apr-01 02:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.266 (still bad) 2010-Apr-01 02:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.259 (still bad) 2010-Apr-01 02:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.251 (still bad) 2010-Apr-01 02:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.248 (still bad) 2010-Apr-01 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.235 (still bad) 2010-Apr-01 02:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.232 (still bad) 2010-Apr-01 02:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.235 (still bad) 2010-Apr-01 02:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.233 (still bad) 2010-Apr-01 02:46:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.382 < 0.75)! 2010-Apr-01 02:46:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.236 1.062 1.031 2010-Apr-01 02:46:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.382 1.194 1.185 1.027 2010-Apr-01 02:46:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.196 0.937 1.237 1.053 2010-Apr-01 02:46:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.937 1.091 1.090 2010-Apr-01 02:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.240 (still bad) 2010-Apr-01 02:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.234 (still bad) 2010-Apr-01 02:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.236 (still bad) 2010-Apr-01 02:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.237 (still bad) 2010-Apr-01 02:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.234 (still bad) 2010-Apr-01 02:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.235 (still bad) 2010-Apr-01 02:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.243 (still bad) 2010-Apr-01 02:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.235 (still bad) 2010-Apr-01 02:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.237 (still bad) 2010-Apr-01 02:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.237 (still bad) 2010-Apr-01 02:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.381 and 1.233 (still bad) 2010-Apr-01 02:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.234 (still bad) 2010-Apr-01 02:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.240 (still bad) 2010-Apr-01 02:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.232 (still bad) 2010-Apr-01 02:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.232 (still bad) 2010-Apr-01 02:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.238 (still bad) 2010-Apr-01 02:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.385 and 1.235 (still bad) 2010-Apr-01 02:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.234 (still bad) 2010-Apr-01 02:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.242 (still bad) 2010-Apr-01 02:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.233 (still bad) 2010-Apr-01 02:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.233 (still bad) 2010-Apr-01 02:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.238 (still bad) 2010-Apr-01 02:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.236 (still bad) 2010-Apr-01 02:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.234 (still bad) 2010-Apr-01 02:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.239 (still bad) 2010-Apr-01 02:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.234 (still bad) 2010-Apr-01 02:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.235 (still bad) 2010-Apr-01 02:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.236 (still bad) 2010-Apr-01 02:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.236 (still bad) 2010-Apr-01 02:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.237 (still bad) 2010-Apr-01 02:47:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.382 < 0.75)! 2010-Apr-01 02:47:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.972 1.236 1.062 1.033 2010-Apr-01 02:47:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.382 1.198 1.187 1.027 2010-Apr-01 02:47:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.201 0.940 1.224 1.040 2010-Apr-01 02:47:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.937 1.089 1.090 2010-Apr-01 02:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.380 and 1.235 (still bad) 2010-Apr-01 02:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.237 (still bad) 2010-Apr-01 02:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.237 (still bad) 2010-Apr-01 02:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.235 (still bad) 2010-Apr-01 02:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.382 and 1.237 (still bad) 2010-Apr-01 02:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.236 (still bad) 2010-Apr-01 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.233 (still bad) 2010-Apr-01 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.237 (still bad) 2010-Apr-01 02:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.235 (still bad) 2010-Apr-01 02:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.238 (still bad) 2010-Apr-01 02:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.236 (still bad) 2010-Apr-01 02:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.237 (still bad) 2010-Apr-01 02:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.236 (still bad) 2010-Apr-01 02:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.237 (still bad) 2010-Apr-01 02:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.237 (still bad) 2010-Apr-01 02:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.236 (still bad) 2010-Apr-01 02:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.240 (still bad) 2010-Apr-01 02:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.235 (still bad) 2010-Apr-01 02:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.239 (still bad) 2010-Apr-01 02:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.240 (still bad) 2010-Apr-01 02:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.237 (still bad) 2010-Apr-01 02:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.239 (still bad) 2010-Apr-01 02:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.242 (still bad) 2010-Apr-01 02:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.240 (still bad) 2010-Apr-01 02:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.238 (still bad) 2010-Apr-01 02:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.242 (still bad) 2010-Apr-01 02:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.240 (still bad) 2010-Apr-01 02:48:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.389 < 0.75)! 2010-Apr-01 02:48:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.242 1.057 1.034 2010-Apr-01 02:48:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.389 1.200 1.188 1.040 2010-Apr-01 02:48:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.195 0.935 1.223 1.041 2010-Apr-01 02:48:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.940 1.086 1.094 2010-Apr-01 02:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.239 (still bad) 2010-Apr-01 02:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.241 (still bad) 2010-Apr-01 02:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.241 (still bad) 2010-Apr-01 02:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.241 (still bad) 2010-Apr-01 02:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.238 (still bad) 2010-Apr-01 02:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.238 (still bad) 2010-Apr-01 02:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.383 and 1.237 (still bad) 2010-Apr-01 02:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.240 (still bad) 2010-Apr-01 02:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.238 (still bad) 2010-Apr-01 02:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.238 (still bad) 2010-Apr-01 02:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.238 (still bad) 2010-Apr-01 02:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.239 (still bad) 2010-Apr-01 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.237 (still bad) 2010-Apr-01 02:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.237 (still bad) 2010-Apr-01 02:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.237 (still bad) 2010-Apr-01 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.238 (still bad) 2010-Apr-01 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.243 (still bad) 2010-Apr-01 02:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.236 (still bad) 2010-Apr-01 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.235 (still bad) 2010-Apr-01 02:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.241 (still bad) 2010-Apr-01 02:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.239 (still bad) 2010-Apr-01 02:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.242 (still bad) 2010-Apr-01 02:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.247 (still bad) 2010-Apr-01 02:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.243 (still bad) 2010-Apr-01 02:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.245 (still bad) 2010-Apr-01 02:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.243 (still bad) 2010-Apr-01 02:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.241 (still bad) 2010-Apr-01 02:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.244 (still bad) 2010-Apr-01 02:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.241 (still bad) 2010-Apr-01 02:49:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.390 < 0.75)! 2010-Apr-01 02:49:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.241 1.058 1.034 2010-Apr-01 02:49:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.390 1.199 1.176 1.029 2010-Apr-01 02:49:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.192 0.938 1.217 1.043 2010-Apr-01 02:49:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.939 1.085 1.093 2010-Apr-01 02:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.243 (still bad) 2010-Apr-01 02:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.241 (still bad) 2010-Apr-01 02:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.243 (still bad) 2010-Apr-01 02:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.245 (still bad) 2010-Apr-01 02:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.246 (still bad) 2010-Apr-01 02:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.243 (still bad) 2010-Apr-01 02:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.398 and 1.244 (still bad) 2010-Apr-01 02:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.241 (still bad) 2010-Apr-01 02:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.241 (still bad) 2010-Apr-01 02:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.241 (still bad) 2010-Apr-01 02:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.239 (still bad) 2010-Apr-01 02:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.236 (still bad) 2010-Apr-01 02:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.240 (still bad) 2010-Apr-01 02:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.237 (still bad) 2010-Apr-01 02:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.238 (still bad) 2010-Apr-01 02:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.239 (still bad) 2010-Apr-01 02:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.238 (still bad) 2010-Apr-01 02:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.238 (still bad) 2010-Apr-01 02:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.239 (still bad) 2010-Apr-01 02:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.238 (still bad) 2010-Apr-01 02:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.240 (still bad) 2010-Apr-01 02:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.240 (still bad) 2010-Apr-01 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.240 (still bad) 2010-Apr-01 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.240 (still bad) 2010-Apr-01 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.239 (still bad) 2010-Apr-01 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.241 (still bad) 2010-Apr-01 02:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.238 (still bad) 2010-Apr-01 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.239 (still bad) 2010-Apr-01 02:50:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.386 < 0.75)! 2010-Apr-01 02:50:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 1.244 1.051 1.038 2010-Apr-01 02:50:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.386 1.201 1.176 1.033 2010-Apr-01 02:50:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.187 0.937 1.216 1.045 2010-Apr-01 02:50:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.941 1.080 1.093 2010-Apr-01 02:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.242 (still bad) 2010-Apr-01 02:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.241 (still bad) 2010-Apr-01 02:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.244 (still bad) 2010-Apr-01 02:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.245 (still bad) 2010-Apr-01 02:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.384 and 1.241 (still bad) 2010-Apr-01 02:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.245 (still bad) 2010-Apr-01 02:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.240 (still bad) 2010-Apr-01 02:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.239 (still bad) 2010-Apr-01 02:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.243 (still bad) 2010-Apr-01 02:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.235 (still bad) 2010-Apr-01 02:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.237 (still bad) 2010-Apr-01 02:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.238 (still bad) 2010-Apr-01 02:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.235 (still bad) 2010-Apr-01 02:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.238 (still bad) 2010-Apr-01 02:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.236 (still bad) 2010-Apr-01 02:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.236 (still bad) 2010-Apr-01 02:51:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:51:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:51:26 LOG5 end_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-Apr-01 02:51:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:51:26 LOG5 end_task: Level: (2) ID = <10526> Status = 0 0 0 0 ok 2010-Apr-01 02:51:26 LOG1 fixed_driftmap: New position: year = 2010.2494703653003 RA = 15:29:38.5 RA/Dec = 15:30:08.1 +19:18:18.9 2010-Apr-01 02:51:26 NOTE fixed_driftmap: Correcting ZA to 6:36:42.2 ... 2010-Apr-01 02:51:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 260.62 6.6117208066 -CF 2010-Apr-01 02:51:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-01 02:51:26 START begin_task: Starting task 'WAPP calibration' 2010-Apr-01 02:51:26 LOG5 begin_task: Level: (2) ID = <10528> Status = 0 0 0 0 ok 2010-Apr-01 02:51:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-01 02:51:26 START begin_task: Starting task 'selecting calibration type' 2010-Apr-01 02:51:26 LOG5 begin_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-Apr-01 02:51:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-01 02:51:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-01 02:51:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:51:26 START begin_task: Starting task 'waiting on setcal' 2010-Apr-01 02:51:26 LOG5 begin_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-Apr-01 02:51:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 260.62 6.6117208066 -CF 2010-Apr-01 02:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:51:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-01 02:51:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-01 02:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:51:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-01 02:51:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-01 02:51:27 LOG5 end_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-01 02:51:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:51:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-01 02:51:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:51:27 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-01 02:51:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:51:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:51:27 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:51:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-01 02:51:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-01 02:51:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:51:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-01 02:51:27 LOG5 begin_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-01 02:51:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-01 02:51:27 LOG5 end_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-01 02:51:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-01 02:51:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-01 02:51:27 LOG5 end_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-01 02:51:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-01 02:51:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-01 02:51:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:51:27 LOG5 begin_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:51:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-01 02:51:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:51:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:51:27 LOG5 end_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-01 02:51:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:51:27 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-01 02:51:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:51:27 INFO2 take_data: Starting WAPP 1-second scan: 9100034 2010-Apr-01 02:51:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:51:27 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-Apr-01 02:51:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:51:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-01 02:51:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24688.00 2010-Apr-01 02:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.236 (still bad) 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-01 02:51:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-01 02:51:29 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-Apr-01 02:51:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-01 02:51:29 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-Apr-01 02:51:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-01 02:51:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-01 02:51:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-01 02:51:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-01 02:51:29 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-Apr-01 02:51:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-01 02:51:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-01 02:51:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-01 02:51:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-01 02:51:29 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-Apr-01 02:51:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-01 02:51:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-01 02:51:29 LOG5 finish_task: Level: (2) ID = <10528> Status = 0 0 0 0 ok 2010-Apr-01 02:51:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-01 02:51:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-01 02:51:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-01 02:51:29 LOG5 end_task: Level: (2) ID = <10528> Status = 0 0 0 0 ok 2010-Apr-01 02:51:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 46 of 99 2010-Apr-01 02:51:30 LOG4 send_obs_status: To obs_status: <1> LOOP 46 2010-Apr-01 02:51:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:51:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:51:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:51:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Greg Hallenbeck 2010-Apr-01 02:51:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-01 02:51:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-01 02:51:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-01 02:51:30 LOG5 begin_task: Level: (2) ID = <10537> Status = 0 0 0 0 ok 2010-Apr-01 02:51:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-01 02:51:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-01 02:51:30 INFO2 take_data: Starting WAPP 600-second scan: 9100035 2010-Apr-01 02:51:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-01 02:51:30 LOG5 begin_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2010-Apr-01 02:51:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Greg Hallenbeck' 2010-Apr-01 02:51:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-01 02:51:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-01 02:51:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24691.00 2010-Apr-01 02:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.515 and 1.689 (still bad) 2010-Apr-01 02:51:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20100401.a2010.0017.fits 2010-Apr-01 02:51:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100401.a2010.0017.fits} 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-01 02:51:32 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-Apr-01 02:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.237 (still bad) 2010-Apr-01 02:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.243 (still bad) 2010-Apr-01 02:51:35 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-Apr-01 02:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.239 (still bad) 2010-Apr-01 02:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.240 (still bad) 2010-Apr-01 02:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.238 (still bad) 2010-Apr-01 02:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.239 (still bad) 2010-Apr-01 02:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.244 (still bad) 2010-Apr-01 02:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.239 (still bad) 2010-Apr-01 02:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.240 (still bad) 2010-Apr-01 02:51:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.390 < 0.75)! 2010-Apr-01 02:51:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.235 1.051 1.035 2010-Apr-01 02:51:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.390 1.201 1.174 1.034 2010-Apr-01 02:51:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.201 0.953 1.215 1.044 2010-Apr-01 02:51:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.942 1.081 1.096 2010-Apr-01 02:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.239 (still bad) 2010-Apr-01 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.245 (still bad) 2010-Apr-01 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.238 (still bad) 2010-Apr-01 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.240 (still bad) 2010-Apr-01 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.242 (still bad) 2010-Apr-01 02:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.242 (still bad) 2010-Apr-01 02:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.241 (still bad) 2010-Apr-01 02:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.246 (still bad) 2010-Apr-01 02:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.241 (still bad) 2010-Apr-01 02:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.243 (still bad) 2010-Apr-01 02:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.244 (still bad) 2010-Apr-01 02:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.243 (still bad) 2010-Apr-01 02:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.240 (still bad) 2010-Apr-01 02:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.245 (still bad) 2010-Apr-01 02:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.241 (still bad) 2010-Apr-01 02:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.242 (still bad) 2010-Apr-01 02:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.240 (still bad) 2010-Apr-01 02:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.239 (still bad) 2010-Apr-01 02:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.246 (still bad) 2010-Apr-01 02:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.239 (still bad) 2010-Apr-01 02:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.243 (still bad) 2010-Apr-01 02:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.393 and 1.243 (still bad) 2010-Apr-01 02:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.241 (still bad) 2010-Apr-01 02:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.388 and 1.241 (still bad) 2010-Apr-01 02:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.244 (still bad) 2010-Apr-01 02:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.399 and 1.246 (still bad) 2010-Apr-01 02:52:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.393 < 0.75)! 2010-Apr-01 02:52:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.246 1.055 1.042 2010-Apr-01 02:52:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.393 1.205 1.175 1.038 2010-Apr-01 02:52:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.186 0.944 1.213 1.049 2010-Apr-01 02:52:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.948 1.081 1.101 2010-Apr-01 02:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.247 (still bad) 2010-Apr-01 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.246 (still bad) 2010-Apr-01 02:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.242 (still bad) 2010-Apr-01 02:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.246 (still bad) 2010-Apr-01 02:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.244 (still bad) 2010-Apr-01 02:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.392 and 1.243 (still bad) 2010-Apr-01 02:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.249 (still bad) 2010-Apr-01 02:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.395 and 1.246 (still bad) 2010-Apr-01 02:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.248 (still bad) 2010-Apr-01 02:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.397 and 1.248 (still bad) 2010-Apr-01 02:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.394 and 1.249 (still bad) 2010-Apr-01 02:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.249 (still bad) 2010-Apr-01 02:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.253 (still bad) 2010-Apr-01 02:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.251 (still bad) 2010-Apr-01 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.249 (still bad) 2010-Apr-01 02:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.390 and 1.250 (still bad) 2010-Apr-01 02:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.246 (still bad) 2010-Apr-01 02:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.245 (still bad) 2010-Apr-01 02:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.246 (still bad) 2010-Apr-01 02:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.245 (still bad) 2010-Apr-01 02:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.386 and 1.244 (still bad) 2010-Apr-01 02:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.247 (still bad) 2010-Apr-01 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.243 (still bad) 2010-Apr-01 02:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.387 and 1.247 (still bad) 2010-Apr-01 02:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.389 and 1.251 (still bad) 2010-Apr-01 02:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.396 and 1.252 (still bad) 2010-Apr-01 02:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.391 and 1.247 (still bad) 2010-Apr-01 02:53:52 INFO5 chec