2009-Mar-31 20:45:15 BEGIN executive: CIMA executive starting ... 2009-Mar-31 20:45:15 NOTE executive: STARTING NEW CIMA SESSION 2009-Mar-31 20:45:15 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Mar-31 20:45:15 INFO4 executive: This is an ON-LINE session 2009-Mar-31 20:45:15 INFO4 executive: This is a REMOTE session 2009-Mar-31 20:45:15 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Mar-31 20:45:15 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Brian Kent' 2009-Mar-31 20:45:15 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090331' 2009-Mar-31 20:45:16 LOG2 log_preferences: Currently applied preferences: 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(dailylog) = daily 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(datawindow) = open 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(logcolours) = full 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(displayformat) = long 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(logformat) = new 2009-Mar-31 20:45:16 LOG2 log_preferences: prefs(fontsize) = 3 2009-Mar-31 20:45:16 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-31 20:45:16 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-31 20:45:16 ALERT executive: CIMA executive ready 2009-Mar-31 20:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:19 LOG4 got_cormsg: From DATATAKING: setup 2009-Mar-31 20:45:20 NOTE frontend: CIMA frontend ready 2009-Mar-31 20:45:24 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Mar-31 20:45:24 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Mar-31 20:45:24 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-31 20:45:24 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-31 20:45:24 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-31 20:45:24 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-31 20:45:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-31 20:45:24 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-31 20:45:24 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-31 20:45:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-31 20:45:24 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-31 20:45:24 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-31 20:45:24 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Mar-31 20:45:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:45:24 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-31 20:45:24 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Mar-31 20:45:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Mar-31 20:45:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:29 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-31 20:45:29 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-31 20:45:29 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-31 20:45:29 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-31 20:45:29 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-31 20:45:29 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-31 20:45:30 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-31 20:45:30 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-31 20:45:30 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-31 20:45:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:33 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-31 20:45:33 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-31 20:45:33 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-31 20:45:33 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-31 20:45:54 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:45:54 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:45:54 LOG1 track_new_source: Calling 'track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:45:54 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:45:54 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2009-Mar-31 20:45:54 LOG3 track_source: Calling 'track_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:45:54 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:45:54 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-31 20:45:54 INFO1 track_source: Starting to track galfasrc 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:45:54 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:45:54 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:45:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:45:54 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:45:54 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:45:54 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:45:54 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:45:54 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:45:54 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:45:54 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:45:54 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:45:54 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:45:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:45:54 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:45:54 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:47:43 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:47:43 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:47:43 LOG1 track_new_source: Calling 'track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:47:43 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:47:43 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2009-Mar-31 20:47:43 LOG3 track_source: Calling 'track_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:47:43 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:47:43 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-31 20:47:43 INFO1 track_source: Starting to track galfasrc 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:47:43 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:47:43 LOG5 finish_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:47:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:47:43 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:47:43 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:47:43 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:47:43 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:47:43 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:47:43 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:47:43 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:47:43 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:47:43 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:47:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:47:43 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:47:43 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:48:10 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:48:10 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:48:10 LOG1 track_new_source: Calling 'track_new_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:48:10 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:48:10 LOG5 begin_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2009-Mar-31 20:48:10 LOG3 track_source: Calling 'track_source galfasrc 091100.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:48:10 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:48:10 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-31 20:48:10 INFO1 track_source: Starting to track galfasrc 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:48:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:48:10 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:48:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:48:10 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:48:10 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:48:10 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:48:10 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:48:10 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:48:10 LOG5 finish_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:48:10 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:48:10 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:48:10 LOG5 finish_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:48:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:48:10 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:48:10 LOG5 end_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:41 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Mar-31 20:49:44 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Mar-31 20:49:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Mar-31 20:49:44 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Mar-31 20:49:44 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-31 20:49:44 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-31 20:49:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Mar-31 20:49:44 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Mar-31 20:49:44 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Mar-31 20:49:44 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-31 20:49:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-31 20:49:44 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-31 20:49:44 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Mar-31 20:49:44 LOG2 CIMA-antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24878 J 2009-Mar-31 20:49:44 LOG2 CIMA-antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:49:44 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 89384 2009 90 0.0 2009-Mar-31 20:49:45 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-31 20:49:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:49:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-31 20:49:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-31 20:49:46 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-31 20:49:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-31 20:49:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-31 20:49:47 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-31 20:49:47 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-31 20:49:47 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Mar-31 20:49:47 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-31 20:49:47 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-31 20:49:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-31 20:49:47 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-31 20:49:47 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-31 20:49:47 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-31 20:49:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:49:47 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-31 20:49:47 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-31 20:49:47 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-31 20:49:47 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-31 20:49:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-31 20:49:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:49:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:49:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:49:47 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:49:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:49:47 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:49:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-31 20:49:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-31 20:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-31 20:49:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-31 20:49:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:49:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-31 20:49:47 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-31 20:49:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:50:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-31 20:50:03 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-31 20:50:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-31 20:50:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-31 20:50:03 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-31 20:50:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-31 20:50:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:50:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-31 20:50:03 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-31 20:50:03 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:50:03 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:50:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:50:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:50:04 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:50:04 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:50:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:50:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:04 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:50:04 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:50:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:50:04 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:50:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:50:04 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:50:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:50:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:50:04 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:50:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:50:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:50:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:50:04 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:50:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:50:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:50:04 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:50:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:50:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:50:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:50:04 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:05 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:50:05 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:50:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:50:05 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Mar-31 20:50:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Mar-31 20:50:05 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Mar-31 20:50:05 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Mar-31 20:50:05 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Mar-31 20:50:05 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Mar-31 20:50:05 LOG3 track_source: Calling 'track_source galfasrc 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:50:05 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:50:05 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-31 20:50:05 INFO1 track_source: Starting to track galfasrc 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:50:05 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:50:05 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:50:05 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:50:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:50:05 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Mar-31 20:50:05 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:50:05 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Mar-31 20:50:05 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Mar-31 20:50:05 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Mar-31 20:50:05 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:50:05 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-31 20:50:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-31 20:50:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-31 20:50:05 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-31 20:50:05 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-31 20:50:05 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-31 20:50:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:50:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20090331.a2010.0023.fits 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-31 20:50:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:50:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:50:06 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090331.a2010.0023.fits} 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:50:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:50:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-31 20:50:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-31 20:50:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-31 20:50:40 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-31 20:50:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-31 20:50:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:50:40 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-31 20:50:40 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-31 20:50:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:50:40 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-31 20:50:40 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-31 20:50:40 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Mar-31 20:50:40 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Mar-31 20:50:40 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-31 20:50:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-31 20:50:40 LOG3 waittrk: Start waittrk 5 2009-Mar-31 20:50:40 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-31 20:50:40 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-31 20:50:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-31 20:50:45 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-31 20:50:45 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-31 20:50:45 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-31 20:50:46 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-31 20:50:46 INFO2 waittrk: Now tracking galfasrc 2009-Mar-31 20:50:46 LOG4 waittrk: Current telescope position: Az = 223.88 ZA = 3.24 2009-Mar-31 20:50:46 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-31 20:50:46 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 DONE finish_task: DONE finished waiting: telescope on source 2009-Mar-31 20:50:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:50:46 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-31 20:50:46 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-31 20:50:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Mar-31 20:50:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-31 20:50:46 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-31 20:50:46 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Mar-31 20:50:46 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Mar-31 20:50:46 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Mar-31 20:50:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Mar-31 20:50:46 START begin_task: Starting task 'selecting calibration type' 2009-Mar-31 20:50:46 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-31 20:50:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-31 20:50:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-31 20:50:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:46 START begin_task: Starting task 'waiting on setcal' 2009-Mar-31 20:50:46 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-31 20:50:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-31 20:50:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:50:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-31 20:50:47 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-31 20:50:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-31 20:50:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:50:47 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-31 20:50:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:50:47 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-31 20:50:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:50:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:50:48 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:50:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-31 20:50:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:50:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:50:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:50:48 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:50:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:50:48 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:50:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:50:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-31 20:50:48 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:50:48 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090331.a2010.0023.fits' is empty! 2009-Mar-31 20:50:48 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Mar-31 20:50:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-31 20:50:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-31 20:50:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:50:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:50:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:50:48 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:50:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:50:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:50:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:50:48 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-31 20:50:48 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:50:48 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-31 20:50:48 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-31 20:50:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-31 20:50:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-31 20:50:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:48 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-31 20:50:48 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-31 20:50:48 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-31 20:50:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:50:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:50:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:50:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-31 20:50:52 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-31 20:50:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:50:52 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-31 20:50:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:50:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:50:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:50:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:50:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-31 20:50:52 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-31 20:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Mar-31 20:50:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2009-Mar-31 20:50:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-31 20:50:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-31 20:50:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-31 20:50:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-31 20:50:52 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.022 1.116 ALFA beam 1: 1.049 1.044 2009-Mar-31 20:50:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.014 0.963 ALFA beam 3: 1.058 1.070 2009-Mar-31 20:50:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.073 0.926 ALFA beam 5: 1.004 0.892 2009-Mar-31 20:50:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.103 ALFA beam 7: 1.015 0.113 2009-Mar-31 20:50:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:50:52 LOG5 finish_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-31 20:50:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:50:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:50:52 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-31 20:50:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:50:52 LOG5 finish_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-31 20:50:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:50:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:50:52 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-31 20:50:52 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-31 20:50:52 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:50:52 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-31 20:50:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:50:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24878 J 2009-Mar-31 20:50:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:50:52 LOG2 antvel: Parameters to Doppler: Topocentric 89452 2009 90 0.0 2009-Mar-31 20:50:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:50:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-31 20:50:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-31 20:50:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:50:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:50:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:50:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:50:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-31 20:50:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:50:53 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-31 20:50:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:50:53 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.032291 2009.2487848252085 18.999933 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333312 20.683333333333344 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 1 9.178910899528807 20.597284615224709 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 2 9.185834796084787 20.597534234766602 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 3 9.190372736066557 20.682467009503995 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 4 9.187698854797928 20.770091501000238 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 5 9.180618230211001 20.768800061860144 2009-Mar-31 20:50:53 LOG4 log_alfabeam: ALFABEAM 6 9.176370692933846 20.680972878730685 2009-Mar-31 20:50:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000198 2009-Mar-31 20:50:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:50:53 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-31 20:50:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:50:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:50:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:50:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:50:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3054.00 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:50:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:50:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.142 1.080 1.062 2009-Mar-31 20:50:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.985 1.124 1.112 2009-Mar-31 20:50:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.959 1.071 0.926 2009-Mar-31 20:50:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.105 1.036 0.115 2009-Mar-31 20:50:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.145 (still bad) 2009-Mar-31 20:50:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2009-Mar-31 20:51:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:51:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.142 (still bad) 2009-Mar-31 20:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.149 (still bad) 2009-Mar-31 20:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:51:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:51:04 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-31 20:51:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:51:04 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-31 20:51:04 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-31 20:51:04 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:51:04 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-31 20:51:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:51:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:51:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:51:04 LOG2 antvel: Parameters to Doppler: Topocentric 89464 2009 90 0.0 2009-Mar-31 20:51:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:51:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-31 20:51:04 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-31 20:51:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:51:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:51:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:51:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-31 20:51:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:51:04 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-31 20:51:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:51:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.035633 2009.2487852054655 18.999933 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333321 20.683333333333344 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 1 9.178976489681469 20.596628507796598 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 2 9.185899025797632 20.597913700255337 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 3 9.190373405489762 20.683508778860428 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 4 9.187632020907815 20.770746536218322 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 5 9.180552015610338 20.768384804614954 2009-Mar-31 20:51:04 LOG4 log_alfabeam: ALFABEAM 6 9.176373351874574 20.679910124131904 2009-Mar-31 20:51:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000199 2009-Mar-31 20:51:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:51:05 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-31 20:51:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:51:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:51:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:51:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3066.00 2009-Mar-31 20:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.145 (still bad) 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Mar-31 20:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Mar-31 20:51:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:51:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Mar-31 20:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.136 (still bad) 2009-Mar-31 20:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Mar-31 20:51:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:51:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:51:16 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-31 20:51:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:51:16 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-31 20:51:16 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-31 20:51:16 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:51:16 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-31 20:51:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:51:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:51:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:51:16 LOG2 antvel: Parameters to Doppler: Topocentric 89476 2009 90 0.0 2009-Mar-31 20:51:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:51:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-31 20:51:16 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-31 20:51:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:51:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-31 20:51:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:51:16 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-31 20:51:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:51:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.038975 2009.2487855857225 18.999933 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333334 20.683333333333341 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 1 9.179043938681081 20.595969044004626 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 2 9.185964285418040 20.598310742058271 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 3 9.190373277066005 20.684572218043243 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 4 9.187563303075489 20.771404530574646 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 5 9.180484786653441 20.767950636503745 2009-Mar-31 20:51:16 LOG4 log_alfabeam: ALFABEAM 6 9.176376909670665 20.678826272363093 2009-Mar-31 20:51:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000200 2009-Mar-31 20:51:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:51:17 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-31 20:51:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:51:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:51:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:51:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3078.00 2009-Mar-31 20:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2009-Mar-31 20:51:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.136 (still bad) 2009-Mar-31 20:51:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.131 (still bad) 2009-Mar-31 20:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Mar-31 20:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Mar-31 20:51:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:51:28 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-31 20:51:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:51:28 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-31 20:51:28 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-31 20:51:28 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:51:28 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-31 20:51:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:51:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:51:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:51:28 LOG2 antvel: Parameters to Doppler: Topocentric 89488 2009 90 0.0 2009-Mar-31 20:51:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:51:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-31 20:51:28 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-31 20:51:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:51:28 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:51:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:51:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-31 20:51:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:51:28 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-31 20:51:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:51:28 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.042318 2009.2487859659796 18.999933 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333319 20.683333333333341 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 1 9.179113317896679 20.595306466812911 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 2 9.186030595484212 20.598726205378902 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 3 9.190372299757001 20.685657969247657 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 4 9.187492629689505 20.772065217208674 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 5 9.180416525917806 20.767496666679751 2009-Mar-31 20:51:28 LOG4 log_alfabeam: ALFABEAM 6 9.176381420149385 20.677720739916332 2009-Mar-31 20:51:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000201 2009-Mar-31 20:51:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:51:29 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-31 20:51:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:51:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:51:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:51:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3090.00 2009-Mar-31 20:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Mar-31 20:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Mar-31 20:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 20:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Mar-31 20:51:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:51:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:51:40 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-31 20:51:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:51:40 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-31 20:51:40 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-31 20:51:40 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:51:40 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-31 20:51:40 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:51:40 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:51:40 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:51:40 LOG2 antvel: Parameters to Doppler: Topocentric 89500 2009 90 0.0 2009-Mar-31 20:51:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:51:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-31 20:51:40 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-31 20:51:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:51:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:51:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:51:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-31 20:51:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:51:40 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-31 20:51:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:51:40 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.045660 2009.2487863462366 18.999933 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333332 20.683333333333344 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 1 9.179184636352691 20.594641654504564 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 2 9.186097914904678 20.599160580535226 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 3 9.190370421200704 20.686765678490950 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 4 9.187419992731137 20.772727694881144 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 5 9.180347279622081 20.767022394870903 2009-Mar-31 20:51:40 LOG4 log_alfabeam: ALFABEAM 6 9.176386935134847 20.676593960873419 2009-Mar-31 20:51:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000202 2009-Mar-31 20:51:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:51:41 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-31 20:51:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 20:51:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:51:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:51:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:51:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3102.00 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 20:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 20:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 20:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 20:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Mar-31 20:51:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:51:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:51:52 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-31 20:51:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:51:52 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-31 20:51:52 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-31 20:51:52 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:51:52 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-31 20:51:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:51:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:51:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:51:52 LOG2 antvel: Parameters to Doppler: Topocentric 89512 2009 90 0.0 2009-Mar-31 20:51:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:51:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-31 20:51:52 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-31 20:51:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:51:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:51:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:51:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-31 20:51:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:51:52 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-31 20:51:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:51:52 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.049003 2009.2487867264938 18.999933 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333319 20.683333333333348 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 1 9.179257987315070 20.593974733656463 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 2 9.186166280393161 20.599614886594281 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 3 9.190367584949454 20.687896282961599 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 4 9.187345298467458 20.773391810732569 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 5 9.180277014133674 20.766526746323738 2009-Mar-31 20:51:52 LOG4 log_alfabeam: ALFABEAM 6 9.176393514662832 20.675445058752768 2009-Mar-31 20:51:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000203 2009-Mar-31 20:51:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:51:53 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-31 20:51:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:51:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:51:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:51:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 20:51:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:51:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3114.00 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 20:51:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:51:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.110 1.040 1.040 2009-Mar-31 20:51:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.958 1.064 1.091 2009-Mar-31 20:51:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.944 0.999 0.889 2009-Mar-31 20:51:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.105 1.022 0.115 2009-Mar-31 20:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 20:51:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:51:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 20:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Mar-31 20:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:52:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:52:04 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-31 20:52:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:52:04 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-31 20:52:04 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-31 20:52:04 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:52:04 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-31 20:52:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:52:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:52:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:52:04 LOG2 antvel: Parameters to Doppler: Topocentric 89524 2009 90 0.0 2009-Mar-31 20:52:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:52:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-31 20:52:04 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-31 20:52:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:52:04 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:52:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:52:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-31 20:52:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:52:04 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-31 20:52:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:52:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.052345 2009.2487871067508 18.999933 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333296 20.683333333333344 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 1 9.179333377320992 20.593306671925419 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 2 9.186235645135442 20.600089629677999 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 3 9.190363735020316 20.689049355998417 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 4 9.187268541586048 20.774056573155928 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 5 9.180205781917884 20.766009209329450 2009-Mar-31 20:52:04 LOG4 log_alfabeam: ALFABEAM 6 9.176401213699789 20.674274547140122 2009-Mar-31 20:52:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000204 2009-Mar-31 20:52:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:52:05 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-31 20:52:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:52:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:52:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 20:52:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:52:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3126.00 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Mar-31 20:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Mar-31 20:52:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Mar-31 20:52:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Mar-31 20:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 20:52:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:52:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:52:16 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-31 20:52:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:52:16 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-31 20:52:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-31 20:52:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-31 20:52:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-31 20:52:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:52:16 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-31 20:52:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:52:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-31 20:52:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:52:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:52:16 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-31 20:52:16 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-31 20:52:16 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:52:16 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-31 20:52:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:52:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:52:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:52:16 LOG2 antvel: Parameters to Doppler: Topocentric 89536 2009 90 0.0 2009-Mar-31 20:52:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:52:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-31 20:52:16 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-31 20:52:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:52:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:52:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:52:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-31 20:52:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:52:16 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-31 20:52:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:52:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.055688 2009.2487874870078 18.999933 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333325 20.683333333333344 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 1 9.179410901582632 20.592637684945085 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 2 9.186306042184613 20.600585890177047 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 3 9.190358809014681 20.690225809801522 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 4 9.187189626585514 20.774721738198352 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 5 9.180133553609689 20.765468649343074 2009-Mar-31 20:52:16 LOG4 log_alfabeam: ALFABEAM 6 9.176410097955662 20.673081583337385 2009-Mar-31 20:52:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000205 2009-Mar-31 20:52:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:52:17 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-31 20:52:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:52:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:52:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:52:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3138.00 2009-Mar-31 20:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:52:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.579 (still bad) 2009-Mar-31 20:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.581 (still bad) 2009-Mar-31 20:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.579 (still bad) 2009-Mar-31 20:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.582 (still bad) 2009-Mar-31 20:52:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.590 (still bad) 2009-Mar-31 20:52:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:52:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:52:28 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-31 20:52:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:52:28 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-31 20:52:28 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-31 20:52:28 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:52:28 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-31 20:52:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:52:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:52:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:52:28 LOG2 antvel: Parameters to Doppler: Topocentric 89548 2009 90 0.0 2009-Mar-31 20:52:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:52:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-31 20:52:28 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-31 20:52:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:52:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:52:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:52:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-31 20:52:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:52:28 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-31 20:52:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:52:28 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.059030 2009.2487878672648 18.999933 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333318 20.683333333333341 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 1 9.179490563228931 20.591968836696008 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 2 9.186377418222300 20.601104183918395 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 3 9.190352747419592 20.691425131468680 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 4 9.187108551813843 20.775386217183247 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 5 9.180060388722788 20.764904550631893 2009-Mar-31 20:52:28 LOG4 log_alfabeam: ALFABEAM 6 9.176420225339440 20.671866773974777 2009-Mar-31 20:52:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000206 2009-Mar-31 20:52:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:52:29 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-31 20:52:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:52:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:52:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:52:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3150.00 2009-Mar-31 20:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:52:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.576 (still bad) 2009-Mar-31 20:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.579 (still bad) 2009-Mar-31 20:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.575 (still bad) 2009-Mar-31 20:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.575 (still bad) 2009-Mar-31 20:52:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.583 (still bad) 2009-Mar-31 20:52:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:52:40 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-31 20:52:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:52:40 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-31 20:52:40 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-31 20:52:40 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:52:40 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-31 20:52:40 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:52:40 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:52:40 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:52:40 LOG2 antvel: Parameters to Doppler: Topocentric 89560 2009 90 0.0 2009-Mar-31 20:52:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:52:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-31 20:52:40 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-31 20:52:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:52:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:52:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:52:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-31 20:52:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:52:40 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-31 20:52:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:52:40 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.062373 2009.248788247522 18.999933 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333321 20.683333333333344 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 1 9.179572458650926 20.591300441475809 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 2 9.186449801793520 20.601645649327924 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 3 9.190345481749125 20.692648194919308 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 4 9.187025220805083 20.776049665627088 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 5 9.179986263045080 20.764315723429259 2009-Mar-31 20:52:40 LOG4 log_alfabeam: ALFABEAM 6 9.176431667261067 20.670629323682441 2009-Mar-31 20:52:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000207 2009-Mar-31 20:52:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:52:41 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-31 20:52:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:52:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:52:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:52:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3162.00 2009-Mar-31 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.578 (still bad) 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Mar-31 20:52:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Mar-31 20:52:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Mar-31 20:52:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Mar-31 20:52:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:52:52 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-31 20:52:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:52:52 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-31 20:52:52 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-31 20:52:52 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:52:52 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-31 20:52:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:52:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:52:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:52:52 LOG2 antvel: Parameters to Doppler: Topocentric 89572 2009 90 0.0 2009-Mar-31 20:52:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:52:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-31 20:52:52 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-31 20:52:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:52:52 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:52:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:52:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-31 20:52:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:52:52 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-31 20:52:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:52:52 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.065715 2009.248788627779 18.999933 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333325 20.683333333333341 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 1 9.179656586473923 20.590633665844472 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 2 9.186523132248416 20.602210803758442 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 3 9.190336949179521 20.693894385894453 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 4 9.186939636698092 20.776710891875666 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 5 9.179911243974823 20.763701657678702 2009-Mar-31 20:52:52 LOG4 log_alfabeam: ALFABEAM 6 9.176444484231123 20.669369946996717 2009-Mar-31 20:52:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000208 2009-Mar-31 20:52:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:52:53 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-31 20:52:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:52:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.577 (still bad) 2009-Mar-31 20:52:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:52:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:52:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:52:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3174.00 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:52:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Mar-31 20:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.553 (still bad) 2009-Mar-31 20:52:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:52:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:52:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.439 1.532 1.456 1.436 2009-Mar-31 20:52:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.410 1.342 1.519 1.518 2009-Mar-31 20:52:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.550 1.344 1.447 1.210 2009-Mar-31 20:52:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.324 0.105 1.460 0.116 2009-Mar-31 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.551 (still bad) 2009-Mar-31 20:53:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.554 (still bad) 2009-Mar-31 20:53:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:53:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:53:04 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-31 20:53:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:53:04 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-31 20:53:04 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-31 20:53:04 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:53:04 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-31 20:53:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:53:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:53:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:53:04 LOG2 antvel: Parameters to Doppler: Topocentric 89584 2009 90 0.0 2009-Mar-31 20:53:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:53:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-31 20:53:04 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-31 20:53:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:53:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:53:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:53:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-31 20:53:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:53:04 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-31 20:53:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:53:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.069058 2009.2487890080361 18.999933 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333325 20.683333333333334 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 1 9.179743043312451 20.589968931924052 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 2 9.186597432711542 20.602800838279482 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 3 9.190327075122676 20.695164524909675 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 4 9.186851703056872 20.777369442026433 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 5 9.179835313392065 20.763061115294306 2009-Mar-31 20:53:04 LOG4 log_alfabeam: ALFABEAM 6 9.176458753248365 20.668087911024507 2009-Mar-31 20:53:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000209 2009-Mar-31 20:53:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:53:05 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-31 20:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:53:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:53:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.553 (still bad) 2009-Mar-31 20:53:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:53:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3186.00 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.553 (still bad) 2009-Mar-31 20:53:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.522 (still bad) 2009-Mar-31 20:53:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.524 (still bad) 2009-Mar-31 20:53:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.523 (still bad) 2009-Mar-31 20:53:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.532 (still bad) 2009-Mar-31 20:53:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:53:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:53:16 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-31 20:53:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:53:16 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-31 20:53:16 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-31 20:53:16 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:53:16 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-31 20:53:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:53:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:53:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:53:16 LOG2 antvel: Parameters to Doppler: Topocentric 89596 2009 90 0.0 2009-Mar-31 20:53:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:53:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-31 20:53:16 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-31 20:53:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:53:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:53:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:53:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-31 20:53:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:53:16 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-31 20:53:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:53:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.072400 2009.2487893882931 18.999933 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333339 20.683333333333344 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 1 9.179831822005406 20.589307513936170 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 2 9.186672634346317 20.603416261160593 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 3 9.190315793824764 20.696457879784774 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 4 9.186761429129241 20.778024016829701 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 5 9.179758547427040 20.762393604230617 2009-Mar-31 20:53:16 LOG4 log_alfabeam: ALFABEAM 6 9.176474536910600 20.666784054219324 2009-Mar-31 20:53:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000210 2009-Mar-31 20:53:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:53:17 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-31 20:53:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:53:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:53:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:53:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3198.00 2009-Mar-31 20:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.527 (still bad) 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:53:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:53:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:53:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.520 (still bad) 2009-Mar-31 20:53:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.523 (still bad) 2009-Mar-31 20:53:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:53:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:53:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:53:28 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-31 20:53:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:53:28 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-31 20:53:28 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-31 20:53:28 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:53:28 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-31 20:53:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:53:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:53:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:53:28 LOG2 antvel: Parameters to Doppler: Topocentric 89608 2009 90 0.0 2009-Mar-31 20:53:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:53:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-31 20:53:28 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-31 20:53:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:53:28 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:53:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:53:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-31 20:53:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:53:28 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-31 20:53:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:53:28 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.075743 2009.2487897685501 18.999933 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333319 20.683333333333341 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 1 9.179923018232094 20.588649950043997 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 2 9.186748753897216 20.604058308236212 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 3 9.190303024737943 20.697775200763502 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 4 9.186668719707786 20.778674045140420 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 5 9.179680935022358 20.761697847700631 2009-Mar-31 20:53:28 LOG4 log_alfabeam: ALFABEAM 6 9.176491917523094 20.665457722758884 2009-Mar-31 20:53:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000211 2009-Mar-31 20:53:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:53:29 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-31 20:53:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:53:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:53:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:53:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3210.00 2009-Mar-31 20:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:53:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.515 (still bad) 2009-Mar-31 20:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Mar-31 20:53:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.512 (still bad) 2009-Mar-31 20:53:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Mar-31 20:53:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:53:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:53:40 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-31 20:53:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:53:40 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-31 20:53:40 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Mar-31 20:53:40 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-31 20:53:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-31 20:53:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:53:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:53:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:53:40 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-31 20:53:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Mar-31 20:53:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:53:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:53:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:53:40 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-31 20:53:40 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-31 20:53:40 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-31 20:53:40 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:53:40 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-31 20:53:40 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:53:40 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:53:40 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:53:40 LOG2 antvel: Parameters to Doppler: Topocentric 89620 2009 90 0.0 2009-Mar-31 20:53:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:53:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-31 20:53:40 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-31 20:53:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:53:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:53:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:53:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-31 20:53:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:53:40 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-31 20:53:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:53:40 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.079085 2009.2487901488073 18.999933 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333326 20.683333333333341 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 1 9.180016617568517 20.587997625452761 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 2 9.186825713484870 20.604727465312497 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 3 9.190288699756644 20.699115619954881 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 4 9.186573591660363 20.779318117389053 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 5 9.179602561867281 20.760973386964366 2009-Mar-31 20:53:40 LOG4 log_alfabeam: ALFABEAM 6 9.176510959049530 20.664109895876766 2009-Mar-31 20:53:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000212 2009-Mar-31 20:53:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:53:41 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-31 20:53:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:53:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:53:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-31 20:53:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3222.00 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:53:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2009-Mar-31 20:53:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.146 (still bad) 2009-Mar-31 20:53:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2009-Mar-31 20:53:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.144 (still bad) 2009-Mar-31 20:53:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.152 (still bad) 2009-Mar-31 20:53:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:53:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:53:52 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-31 20:53:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:53:52 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-31 20:53:52 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-31 20:53:52 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:53:52 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-31 20:53:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:53:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:53:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:53:52 LOG2 antvel: Parameters to Doppler: Topocentric 89632 2009 90 0.0 2009-Mar-31 20:53:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:53:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-31 20:53:52 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-31 20:53:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:53:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:53:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:53:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-31 20:53:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:53:52 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-31 20:53:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:53:52 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.082427 2009.2487905290643 18.999933 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333351 20.683333333333334 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 1 9.180112684269885 20.587351393373481 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 2 9.186903499098994 20.605424789292254 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 3 9.190272737740880 20.700479387387734 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 4 9.186475982000392 20.779955349520922 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 5 9.179523448714873 20.760219149452031 2009-Mar-31 20:53:52 LOG4 log_alfabeam: ALFABEAM 6 9.176531742125537 20.662740429551953 2009-Mar-31 20:53:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000213 2009-Mar-31 20:53:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:53:53 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-31 20:53:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:53:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:53:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:53:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:53:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-31 20:53:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3234.00 2009-Mar-31 20:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.145 (still bad) 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:53:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.136 (still bad) 2009-Mar-31 20:53:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.137 (still bad) 2009-Mar-31 20:54:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:54:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.137 1.072 1.051 2009-Mar-31 20:54:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.964 1.108 1.107 2009-Mar-31 20:54:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.955 1.054 0.912 2009-Mar-31 20:54:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.105 1.034 0.116 2009-Mar-31 20:54:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2009-Mar-31 20:54:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.144 (still bad) 2009-Mar-31 20:54:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:54:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:54:04 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-31 20:54:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:54:04 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-31 20:54:04 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-31 20:54:04 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:54:04 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-31 20:54:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:54:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:54:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:54:04 LOG2 antvel: Parameters to Doppler: Topocentric 89644 2009 90 0.0 2009-Mar-31 20:54:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:54:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-31 20:54:04 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-31 20:54:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:54:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:54:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:54:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-31 20:54:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:54:04 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-31 20:54:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:54:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.085770 2009.2487909093213 18.999933 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333305 20.683333333333341 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 1 9.180211282334923 20.586712173824676 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 2 9.186982093180248 20.606151365933332 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 3 9.190255053959856 20.701866715455164 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 4 9.186375828170029 20.780584790138420 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 5 9.179443620242795 20.759434037570649 2009-Mar-31 20:54:04 LOG4 log_alfabeam: ALFABEAM 6 9.176554350579547 20.661349222111202 2009-Mar-31 20:54:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000214 2009-Mar-31 20:54:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:54:05 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-31 20:54:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:54:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:54:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-31 20:54:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3246.00 2009-Mar-31 20:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.139 (still bad) 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:54:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.135 (still bad) 2009-Mar-31 20:54:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.135 (still bad) 2009-Mar-31 20:54:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Mar-31 20:54:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.131 (still bad) 2009-Mar-31 20:54:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:54:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:54:16 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-31 20:54:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:54:16 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-31 20:54:16 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-31 20:54:16 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:54:16 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-31 20:54:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:54:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:54:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:54:16 LOG2 antvel: Parameters to Doppler: Topocentric 89656 2009 90 0.0 2009-Mar-31 20:54:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:54:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-31 20:54:16 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-31 20:54:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:54:16 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:54:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:54:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-31 20:54:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:54:16 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-31 20:54:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:54:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.089112 2009.2487912895783 18.999933 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333300 20.683333333333351 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 1 9.180312383261450 20.586081519123834 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 2 9.187061402768897 20.606907615473922 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 3 9.190235578389725 20.703276497646510 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 4 9.186273161707360 20.781204864999793 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 5 9.179363177878418 20.758617678319059 2009-Mar-31 20:54:16 LOG4 log_alfabeam: ALFABEAM 6 9.176578848536558 20.659937496269219 2009-Mar-31 20:54:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000215 2009-Mar-31 20:54:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:54:17 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-31 20:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.140 (still bad) 2009-Mar-31 20:54:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:54:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:54:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-31 20:54:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3258.00 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2009-Mar-31 20:54:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:54:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Mar-31 20:54:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 20:54:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Mar-31 20:54:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 20:54:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:54:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:54:28 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-31 20:54:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:54:28 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-31 20:54:28 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-31 20:54:28 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:54:28 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-31 20:54:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:54:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:54:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:54:28 LOG2 antvel: Parameters to Doppler: Topocentric 89668 2009 90 0.0 2009-Mar-31 20:54:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:54:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-31 20:54:28 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-31 20:54:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:54:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:54:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:54:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-31 20:54:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:54:28 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-31 20:54:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:54:28 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.092455 2009.2487916698353 18.999933 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333319 20.683333333333334 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 1 9.180416073935007 20.585460281459394 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 2 9.187141424422368 20.607694831617700 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 3 9.190214217592061 20.704709225666470 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 4 9.186167897099208 20.781814688594974 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 5 9.179282132350748 20.757768761101740 2009-Mar-31 20:54:28 LOG4 log_alfabeam: ALFABEAM 6 9.176605328887327 20.658504874868360 2009-Mar-31 20:54:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000216 2009-Mar-31 20:54:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:54:29 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-31 20:54:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:54:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:54:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Mar-31 20:54:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-31 20:54:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3270.00 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:54:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Mar-31 20:54:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 20:54:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 20:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 20:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Mar-31 20:54:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:54:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:54:40 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-31 20:54:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:54:40 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-31 20:54:40 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-31 20:54:40 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:54:40 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-31 20:54:40 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:54:40 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:54:40 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:54:40 LOG2 antvel: Parameters to Doppler: Topocentric 89680 2009 90 0.0 2009-Mar-31 20:54:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:54:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-31 20:54:40 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-31 20:54:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:54:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:54:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:54:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-31 20:54:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:54:40 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-31 20:54:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:54:40 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.095797 2009.2487920500926 18.999933 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333307 20.683333333333334 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 1 9.180522314095857 20.584850119950449 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 2 9.187222054255141 20.608513364781743 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 3 9.190190901746607 20.706163610384660 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 4 9.186060078063933 20.782412582697642 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 5 9.179200596323989 20.756886998898366 2009-Mar-31 20:54:40 LOG4 log_alfabeam: ALFABEAM 6 9.176633854201592 20.657052763868528 2009-Mar-31 20:54:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000217 2009-Mar-31 20:54:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:54:41 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-31 20:54:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:54:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:54:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 20:54:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-31 20:54:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3282.00 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:54:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 20:54:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 20:54:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 20:54:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 20:54:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 20:54:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:54:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:54:52 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-31 20:54:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:54:52 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-31 20:54:52 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-31 20:54:52 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:54:52 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-31 20:54:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:54:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:54:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:54:52 LOG2 antvel: Parameters to Doppler: Topocentric 89692 2009 90 0.0 2009-Mar-31 20:54:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:54:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-31 20:54:52 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-31 20:54:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:54:52 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:54:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:54:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-31 20:54:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:54:52 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-31 20:54:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:54:52 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.099140 2009.2487924303496 18.999933 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333319 20.683333333333330 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 1 9.180631184007208 20.584252014353261 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 2 9.187303279196017 20.609364501377652 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 3 9.190165533756796 20.707640005096344 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 4 9.185949626124597 20.782997535575085 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 5 9.179118590668976 20.755971101914593 2009-Mar-31 20:54:52 LOG4 log_alfabeam: ALFABEAM 6 9.176664519832970 20.655580928875555 2009-Mar-31 20:54:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000218 2009-Mar-31 20:54:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:54:53 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-31 20:54:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:54:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:54:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:54:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:54:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-31 20:54:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3294.00 2009-Mar-31 20:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:54:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Mar-31 20:54:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Mar-31 20:54:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:54:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 20:55:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:55:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.106 1.034 1.030 2009-Mar-31 20:55:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.945 1.056 1.085 2009-Mar-31 20:55:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.941 0.992 0.886 2009-Mar-31 20:55:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.017 0.115 2009-Mar-31 20:55:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Mar-31 20:55:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:55:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:55:04 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-31 20:55:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:55:04 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-31 20:55:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-31 20:55:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-31 20:55:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-31 20:55:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:55:04 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-31 20:55:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:55:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-31 20:55:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:55:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:55:04 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-31 20:55:04 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-31 20:55:04 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:55:04 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-31 20:55:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:55:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:55:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:55:04 LOG2 antvel: Parameters to Doppler: Topocentric 89704 2009 90 0.0 2009-Mar-31 20:55:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:55:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-31 20:55:04 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-31 20:55:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:55:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:55:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:55:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-31 20:55:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:55:04 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-31 20:55:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:55:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.102482 2009.2487928106066 18.999933 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333325 20.683333333333344 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 1 9.180742629603142 20.583667721726421 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 2 9.187384983927439 20.610248497170954 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 3 9.190138045558777 20.709136920200869 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 4 9.185836599239099 20.783567775008088 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 5 9.179036239643567 20.755020896066288 2009-Mar-31 20:55:04 LOG4 log_alfabeam: ALFABEAM 6 9.176697385114194 20.654090974147749 2009-Mar-31 20:55:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000219 2009-Mar-31 20:55:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:55:05 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-31 20:55:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:55:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-31 20:55:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-31 20:55:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3306.00 2009-Mar-31 20:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:55:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.571 (still bad) 2009-Mar-31 20:55:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.574 (still bad) 2009-Mar-31 20:55:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.570 (still bad) 2009-Mar-31 20:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.574 (still bad) 2009-Mar-31 20:55:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:55:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.573 (still bad) 2009-Mar-31 20:55:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:55:16 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-31 20:55:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:55:16 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-31 20:55:16 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-31 20:55:16 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:55:16 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-31 20:55:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:55:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:55:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:55:16 LOG2 antvel: Parameters to Doppler: Topocentric 89716 2009 90 0.0 2009-Mar-31 20:55:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:55:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-31 20:55:16 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-31 20:55:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:55:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:55:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:55:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-31 20:55:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:55:16 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-31 20:55:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:55:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.105825 2009.2487931908636 18.999933 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333305 20.683333333333348 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 1 9.180856722513184 20.583098344363382 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 2 9.187467145061937 20.611166608617030 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 3 9.190108337720572 20.710654551124186 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 4 9.185720927994339 20.784122169154120 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 5 9.178953574816200 20.754035137240880 2009-Mar-31 20:55:16 LOG4 log_alfabeam: ALFABEAM 6 9.176732546398707 20.652582824960785 2009-Mar-31 20:55:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000220 2009-Mar-31 20:55:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:55:17 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-31 20:55:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:55:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-31 20:55:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-31 20:55:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3318.00 2009-Mar-31 20:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.573 (still bad) 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.563 (still bad) 2009-Mar-31 20:55:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.564 (still bad) 2009-Mar-31 20:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.562 (still bad) 2009-Mar-31 20:55:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.563 (still bad) 2009-Mar-31 20:55:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:55:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:55:28 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-31 20:55:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:55:28 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-31 20:55:28 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-31 20:55:28 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:55:28 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-31 20:55:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:55:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:55:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:55:28 LOG2 antvel: Parameters to Doppler: Topocentric 89728 2009 90 0.0 2009-Mar-31 20:55:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:55:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-31 20:55:28 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-31 20:55:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:55:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:55:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:55:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-31 20:55:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:55:28 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-31 20:55:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:55:28 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.109167 2009.2487935711206 18.999933 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333264 20.683333333333348 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 1 9.180973392752859 20.582545722993192 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 2 9.187549635588054 20.612118968825367 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 3 9.190076345823282 20.712191192007278 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 4 9.185602686695507 20.784658867333274 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 5 9.178870732105983 20.753013794231364 2009-Mar-31 20:55:28 LOG4 log_alfabeam: ALFABEAM 6 9.176770057791460 20.651058296227212 2009-Mar-31 20:55:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000221 2009-Mar-31 20:55:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:55:29 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-31 20:55:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:55:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-31 20:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Mar-31 20:55:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-31 20:55:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3330.00 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.565 (still bad) 2009-Mar-31 20:55:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.560 (still bad) 2009-Mar-31 20:55:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.557 (still bad) 2009-Mar-31 20:55:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.556 (still bad) 2009-Mar-31 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.557 (still bad) 2009-Mar-31 20:55:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:55:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:55:40 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-31 20:55:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:55:40 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-31 20:55:40 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-31 20:55:40 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:55:40 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-31 20:55:40 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:55:40 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:55:40 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:55:40 LOG2 antvel: Parameters to Doppler: Topocentric 89740 2009 90 0.0 2009-Mar-31 20:55:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:55:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-31 20:55:40 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-31 20:55:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:55:40 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:55:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:55:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-31 20:55:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:55:40 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-31 20:55:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:55:40 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.112510 2009.2487939513778 18.999933 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333316 20.683333333333344 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 1 9.181092701226500 20.582011072114025 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 2 9.187632421345512 20.613106778328042 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 3 9.190041969761138 20.713746862772371 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 4 9.185481817086803 20.785176629141951 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 5 9.178787754058693 20.751955696603819 2009-Mar-31 20:55:40 LOG4 log_alfabeam: ALFABEAM 6 9.176810014870098 20.649517487334926 2009-Mar-31 20:55:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000222 2009-Mar-31 20:55:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:55:41 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-31 20:55:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:55:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-31 20:55:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.556 (still bad) 2009-Mar-31 20:55:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-31 20:55:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3342.00 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.556 (still bad) 2009-Mar-31 20:55:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.542 (still bad) 2009-Mar-31 20:55:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.540 (still bad) 2009-Mar-31 20:55:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.537 (still bad) 2009-Mar-31 20:55:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.542 (still bad) 2009-Mar-31 20:55:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:55:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:55:52 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-31 20:55:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:55:52 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-31 20:55:52 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-31 20:55:52 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:55:52 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-31 20:55:52 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:55:52 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:55:52 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:55:52 LOG2 antvel: Parameters to Doppler: Topocentric 89752 2009 90 0.0 2009-Mar-31 20:55:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:55:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-31 20:55:52 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-31 20:55:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:55:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:55:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:55:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-31 20:55:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:55:52 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-31 20:55:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:55:52 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.115852 2009.2487943316348 18.999933 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333268 20.683333333333344 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 1 9.181214559939992 20.581496295678008 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 2 9.187715363689748 20.614130016886975 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 3 9.190005150983579 20.715319628904773 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 4 9.185358411888153 20.785673547246301 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 5 9.178704787952087 20.750860988297639 2009-Mar-31 20:55:52 LOG4 log_alfabeam: ALFABEAM 6 9.176852464226053 20.647962432196742 2009-Mar-31 20:55:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000223 2009-Mar-31 20:55:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:55:53 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-31 20:55:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:55:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-31 20:55:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:55:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:55:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-31 20:55:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3354.00 2009-Mar-31 20:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.540 (still bad) 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.519 (still bad) 2009-Mar-31 20:55:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:55:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.519 (still bad) 2009-Mar-31 20:56:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Mar-31 20:56:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 20:56:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.423 1.528 1.436 1.429 2009-Mar-31 20:56:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.404 1.325 1.497 1.521 2009-Mar-31 20:56:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.520 1.333 1.418 1.203 2009-Mar-31 20:56:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.314 0.105 1.453 0.115 2009-Mar-31 20:56:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:56:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:56:04 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-31 20:56:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:56:04 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-31 20:56:04 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-31 20:56:04 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:56:04 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-31 20:56:04 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:56:04 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24879 J 2009-Mar-31 20:56:04 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:56:04 LOG2 antvel: Parameters to Doppler: Topocentric 89764 2009 90 0.0 2009-Mar-31 20:56:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:56:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-31 20:56:04 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-31 20:56:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:56:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:56:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:56:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-31 20:56:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:56:04 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-31 20:56:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:56:04 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.119195 2009.2487947118918 18.999933 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333287 20.683333333333344 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 1 9.181339016987561 20.581002704001921 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 2 9.187798417540757 20.615189800359786 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 3 9.189965790709120 20.716909320361598 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 4 9.185232426068657 20.786148290379376 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 5 9.178621887232586 20.749728602977651 2009-Mar-31 20:56:04 LOG4 log_alfabeam: ALFABEAM 6 9.176897498589060 20.646393414970639 2009-Mar-31 20:56:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000224 2009-Mar-31 20:56:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:56:05 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-31 20:56:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:56:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-31 20:56:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-31 20:56:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3366.00 2009-Mar-31 20:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.523 (still bad) 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Mar-31 20:56:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:56:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Mar-31 20:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:56:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:56:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:56:16 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-31 20:56:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:56:16 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-31 20:56:16 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-31 20:56:16 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:56:16 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-31 20:56:16 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:56:16 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24880 J 2009-Mar-31 20:56:16 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:56:16 LOG2 antvel: Parameters to Doppler: Topocentric 89776 2009 90 0.0 2009-Mar-31 20:56:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:56:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-31 20:56:16 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-31 20:56:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:56:16 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:56:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:56:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-31 20:56:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-31 20:56:16 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-31 20:56:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:56:16 LOG5 log_alfabeam: Parameters: 9.1833333333333336 20.683333333333334 9.122537 2009.2487950921488 18.999933 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333339 20.683333333333334 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 1 9.181465964405357 20.580532237064553 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 2 9.187881433085744 20.616285922608537 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 3 9.189923838790856 20.718513766466216 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 4 9.185103972677007 20.786598923150937 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 5 9.178539209785443 20.748558893304583 2009-Mar-31 20:56:16 LOG4 log_alfabeam: ALFABEAM 6 9.176945154495687 20.644812691478492 2009-Mar-31 20:56:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 909000225 2009-Mar-31 20:56:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-31 20:56:17 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-31 20:56:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:56:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-31 20:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.526 (still bad) 2009-Mar-31 20:56:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-31 20:56:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3378.00 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.521 (still bad) 2009-Mar-31 20:56:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.513 (still bad) 2009-Mar-31 20:56:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.511 (still bad) 2009-Mar-31 20:56:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.513 (still bad) 2009-Mar-31 20:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.511 (still bad) 2009-Mar-31 20:56:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:56:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-31 20:56:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-31 20:56:28 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-31 20:56:28 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 INFO2 smartfreq: Switching off CAL 2009-Mar-31 20:56:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:56:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:56:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:56:28 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:56:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:56:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:56:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:56:28 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 INFO3 restore_frequencies: Restoring original frequencies 2009-Mar-31 20:56:28 LOG5 antvel: Calling 'antvel 91100.000000 204100.000000 J Topocentric 0' 2009-Mar-31 20:56:28 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24880 J 2009-Mar-31 20:56:28 LOG2 antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:56:28 LOG2 antvel: Parameters to Doppler: Topocentric 89788 2009 90 0.0 2009-Mar-31 20:56:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:56:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-31 20:56:28 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-31 20:56:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:56:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:56:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:56:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:28 STOP finish_task: Finishing task 'smart frequency switching' 2009-Mar-31 20:56:28 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Mar-31 20:56:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:56:28 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Mar-31 20:56:28 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-31 20:56:28 NOTE run_command_file: DONE with command file processing 2009-Mar-31 20:56:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-31 20:56:29 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-31 20:56:29 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-31 20:56:29 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Mar-31 20:56:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:56:29 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Mar-31 20:56:29 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-31 20:56:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:56:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Mar-31 20:56:50 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:56:50 LOG4 exec_msg: From OBSERVER: track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:56:50 LOG1 track_new_source: Calling 'track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:56:50 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:56:50 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-31 20:56:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Selecting source 'drift85p2' ...} 2009-Mar-31 20:56:50 LOG3 track_source: Calling 'track_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:56:50 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:56:50 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-31 20:56:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Slewing to source 'drift85p2' ...} 2009-Mar-31 20:56:50 INFO1 track_source: Starting to track drift85p2 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:56:50 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:56:51 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:56:51 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:56:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:56:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:56:51 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:56:51 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:56:51 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:56:51 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:56:51 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:56:51 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:56:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:56:51 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:56:51 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:56:51 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:56:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:56:51 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:56:51 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:56:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:56:59 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Mar-31 20:57:00 LOG2 CIMA-antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24880 J 2009-Mar-31 20:57:00 LOG2 CIMA-antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:57:00 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 89820 2009 90 0.0 2009-Mar-31 20:57:00 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-31 20:57:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:57:02 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-31 20:57:02 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-31 20:57:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-31 20:57:02 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-31 20:57:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-31 20:57:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-31 20:57:02 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-31 20:57:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:57:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:57:02 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-31 20:57:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:57:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:57:02 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-31 20:57:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:57:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:02 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-31 20:57:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-31 20:57:02 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-31 20:57:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-31 20:57:02 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-31 20:57:02 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-31 20:57:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-31 20:57:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:02 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-31 20:57:02 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-31 20:57:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-31 20:57:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:03 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-31 20:57:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:03 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-31 20:57:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-31 20:57:03 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-31 20:57:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:03 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:57:03 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-31 20:57:03 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-31 20:57:03 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:57:03 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:57:03 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:57:03 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:57:03 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:57:03 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:57:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:57:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:03 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:57:03 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-31 20:57:03 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Mar-31 20:57:03 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:57:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:57:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:57:04 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:57:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:57:04 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:57:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:57:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:57:04 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:57:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:57:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:57:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:57:04 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:57:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:57:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:57:04 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:57:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:57:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:57:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:57:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:57:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:57:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:57:04 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-31 20:57:04 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:57:04 LOG5 finish_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:57:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:04 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:57:04 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:57:04 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Mar-31 20:57:04 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Mar-31 20:57:04 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:57:04 LOG5 begin_task: Level: (1) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-31 20:57:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-31 20:57:04 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-31 20:57:04 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-31 20:57:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:57:05 LOG5 finish_task: Level: (1) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-31 20:57:05 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-31 20:57:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:05 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-31 20:57:05 LOG5 end_task: Level: (1) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-31 20:57:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-31 20:57:05 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-31 20:57:06 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Mar-31 20:57:18 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Mar-31 20:57:18 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Mar-31 20:57:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:57:18 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-31 20:57:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-31 20:57:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-31 20:57:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-31 20:57:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:57:18 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-31 20:57:18 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-31 20:57:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:18 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-31 20:57:18 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-31 20:57:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-31 20:57:19 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-31 20:57:26 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:57:26 LOG4 exec_msg: From OBSERVER: track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:57:26 LOG1 track_new_source: Calling 'track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:57:26 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:57:26 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Selecting source 'drift85p2' ...} 2009-Mar-31 20:57:26 LOG3 track_source: Calling 'track_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:57:26 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:57:26 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Slewing to source 'drift85p2' ...} 2009-Mar-31 20:57:26 INFO1 track_source: Starting to track drift85p2 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:57:26 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:57:26 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:57:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:57:26 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:57:26 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:57:26 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:57:26 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:57:26 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:57:26 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:57:26 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:57:26 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:57:26 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:57:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:26 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:57:26 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:27 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:57:27 LOG4 exec_msg: From OBSERVER: track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:57:27 LOG1 track_new_source: Calling 'track_new_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:57:27 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:57:27 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-31 20:57:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Selecting source 'drift85p2' ...} 2009-Mar-31 20:57:27 LOG3 track_source: Calling 'track_source drift85p2 091100.0 +204100 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:57:27 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:57:27 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-31 20:57:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Slewing to source 'drift85p2' ...} 2009-Mar-31 20:57:28 INFO1 track_source: Starting to track drift85p2 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:57:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:57:28 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:57:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:57:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:57:28 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:57:28 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:57:28 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:57:28 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:57:28 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:57:28 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:57:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:57:28 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:57:28 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:57:28 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:57:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:28 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:57:28 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +204100 -CJ 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:57:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:34 LOG2 CIMA-antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24880 J 2009-Mar-31 20:57:34 LOG2 CIMA-antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:57:34 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 89854 2009 90 0.0 2009-Mar-31 20:57:35 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-31 20:57:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:57:36 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-31 20:57:36 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-31 20:57:36 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-31 20:57:36 LOG5 begin_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-31 20:57:36 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-31 20:57:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-31 20:57:36 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-31 20:57:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:57:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:57:36 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-31 20:57:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:57:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:57:36 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-31 20:57:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:57:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:36 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-31 20:57:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-31 20:57:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-31 20:57:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-31 20:57:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-31 20:57:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-31 20:57:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-31 20:57:36 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-31 20:57:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:57:37 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:37 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-31 20:57:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-31 20:57:37 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-31 20:57:37 LOG5 finish_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-31 20:57:37 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-31 20:57:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:37 LOG5 end_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-31 20:57:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:41 LOG2 CIMA-antvel: Precessing RA = 09:11:00.0 Dec = +20:41:00.0 Epoch = 2009.24880 J 2009-Mar-31 20:57:41 LOG2 CIMA-antvel: Computed apparent RA = 09:11:33.4 Dec = +20:38:40.5 2009-Mar-31 20:57:41 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 89860 2009 90 0.0 2009-Mar-31 20:57:41 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-31 20:57:41 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:57:42 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:57:43 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-31 20:57:43 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-31 20:57:43 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-31 20:57:43 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-31 20:57:43 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-31 20:57:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-31 20:57:43 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-31 20:57:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:57:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:57:43 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:57:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:57:44 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:57:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:57:44 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-31 20:57:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-31 20:57:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-31 20:57:44 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-31 20:57:44 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-31 20:57:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-31 20:57:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:44 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-31 20:57:44 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-31 20:57:44 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:44 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-31 20:57:44 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-31 20:57:44 LOG5 finish_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-31 20:57:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:44 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-31 20:57:44 LOG5 end_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-31 20:57:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:57:50 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-31 20:57:50 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-31 20:57:50 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:57:50 LOG5 begin_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:57:50 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:57:50 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:57:50 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:57:50 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:57:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:57:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:50 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:57:50 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:57:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:57:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:57:50 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:57:50 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:57:50 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:57:50 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:57:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:57:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:57:50 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-31 20:57:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:57:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:57:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:57:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:57:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:57:51 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:57:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:57:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:57:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:57:51 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-31 20:57:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:57:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:57:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:57:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:57:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:57:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:57:51 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-31 20:57:51 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-31 20:57:51 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:57:51 LOG5 finish_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-31 20:57:51 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:57:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:57:51 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:57:51 LOG5 end_task: Level: (1) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-31 20:57:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:57:51 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:58:02 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-31 20:58:02 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-31 20:58:02 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:58:02 LOG5 begin_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-31 20:58:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:58:02 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:58:02 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:58:02 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:58:02 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-31 20:58:02 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:58:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:58:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:02 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:58:02 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-31 20:58:02 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:58:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:58:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:58:03 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:58:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:58:03 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:58:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:58:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:03 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:03 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:58:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:58:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:03 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:58:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:58:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:03 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-31 20:58:03 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:58:03 LOG5 finish_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:58:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:58:03 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:58:03 LOG5 end_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-31 20:58:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:58:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:58:06 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-31 20:58:06 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-31 20:58:06 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-31 20:58:06 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-31 20:58:06 LOG5 begin_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2009-Mar-31 20:58:06 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-31 20:58:06 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-31 20:58:06 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-31 20:58:06 LOG5 end_task: Level: (1) ID = <10135> Status = 0 0 0 0 ok 2009-Mar-31 20:58:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:58:06 LOG3 exec_msg: Closing socket 2009-Mar-31 20:58:06 LOG3 exec_msg: Closing socket 2009-Mar-31 20:58:06 LOG3 exec_msg: Closing socket 2009-Mar-31 20:58:06 LOG3 exec_msg: Closing socket 2009-Mar-31 20:58:09 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-31 20:58:09 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-31 20:58:09 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-31 20:58:09 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-31 20:58:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:58:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:58:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:58:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:58:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:58:14 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-31 20:58:14 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-31 20:58:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:58:14 LOG5 begin_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:58:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:58:14 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:58:14 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:58:14 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:58:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:58:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:14 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:58:14 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:58:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:58:14 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:58:14 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:58:14 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:58:14 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:58:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:58:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:14 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:14 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:58:14 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:58:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:58:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:58:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:15 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Mar-31 20:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:58:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:58:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:58:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:15 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Mar-31 20:58:15 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-31 20:58:15 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:58:15 LOG5 finish_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-31 20:58:15 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:58:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:58:15 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:58:15 LOG5 end_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-31 20:58:15 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-31 20:58:22 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-31 20:58:22 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-31 20:58:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-31 20:58:22 LOG5 begin_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-31 20:58:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-31 20:58:22 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-31 20:58:22 START begin_task: Starting task 'selecting calibration port' 2009-Mar-31 20:58:22 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-31 20:58:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-31 20:58:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:22 START begin_task: Starting task 'waiting on calport' 2009-Mar-31 20:58:22 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-31 20:58:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:58:22 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-31 20:58:22 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-31 20:58:22 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-31 20:58:22 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-31 20:58:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-31 20:58:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:22 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:22 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Mar-31 20:58:22 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-31 20:58:22 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-31 20:58:22 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:58:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-31 20:58:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-31 20:58:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-31 20:58:23 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Mar-31 20:58:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-31 20:58:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-31 20:58:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-31 20:58:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-31 20:58:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:58:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-31 20:58:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-31 20:58:23 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Mar-31 20:58:23 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-31 20:58:23 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-31 20:58:23 LOG5 finish_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Mar-31 20:58:23 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-31 20:58:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:58:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-31 20:58:23 LOG5 end_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Mar-31 20:58:23 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-31 20:58:39 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-31 20:58:39 LOG4 exec_msg: From OBSERVER: track_new_source drift85p2 091000.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-31 20:58:39 LOG1 track_new_source: Calling 'track_new_source drift85p2 091000.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-31 20:58:39 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-31 20:58:39 LOG5 begin_task: Level: (1) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-31 20:58:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Selecting source 'drift85p2' ...} 2009-Mar-31 20:58:39 LOG3 track_source: Calling 'track_source drift85p2 091000.0 +204100 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-31 20:58:39 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:58:39 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Mar-31 20:58:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Slewing to source 'drift85p2' ...} 2009-Mar-31 20:58:39 INFO1 track_source: Starting to track drift85p2 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: set ra 091000.0 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: set dec +204100 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: pnt tr 091000.0 +204100 -CJ 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:58:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:58:39 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Mar-31 20:58:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:58:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:58:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:58:39 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Mar-31 20:58:39 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-31 20:58:39 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-31 20:58:39 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Mar-31 20:58:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-31 20:58:39 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:58:40 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-31 20:58:40 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Mar-31 20:58:40 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-31 20:58:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:58:40 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-31 20:58:40 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Mar-31 20:58:40 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-31 20:58:40 LOG5 finish_task: Level: (1) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-31 20:58:40 DONE finish_task: DONE finished selecting: new source 2009-Mar-31 20:58:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:58:40 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-31 20:58:40 LOG5 end_task: Level: (1) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: set ra 091000.0 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: set dec +204100 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% 091000.0 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% +204100 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: pnt tr 091000.0 +204100 -CJ 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-31 20:58:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:54 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Mar-31 20:58:54 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Mar-31 20:58:54 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:58:54 LOG5 begin_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2009-Mar-31 20:58:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-31 20:58:54 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-31 20:58:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-31 20:58:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-31 20:58:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:54 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-31 20:58:54 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Mar-31 20:58:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-31 20:58:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:58:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-31 20:58:58 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Mar-31 20:58:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-31 20:58:58 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:58:58 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2009-Mar-31 20:58:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-31 20:58:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:58:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:58:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:58:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:58:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-31 20:58:58 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Mar-31 20:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-31 20:58:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:58:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-31 20:58:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 5 dB 2009-Mar-31 20:58:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-31 20:58:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-31 20:58:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-31 20:58:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-31 20:58:58 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Mar-31 20:58:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 0.892 ALFA beam 1: 1.041 1.033 2009-Mar-31 20:58:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.004 0.961 ALFA beam 3: 1.055 1.076 2009-Mar-31 20:58:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.054 0.924 ALFA beam 5: 1.009 0.892 2009-Mar-31 20:58:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.894 0.103 ALFA beam 7: 0.995 0.113 2009-Mar-31 20:58:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:58:59 LOG5 finish_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2009-Mar-31 20:58:59 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Mar-31 20:58:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:58:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:58:59 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2009-Mar-31 20:58:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Mar-31 20:58:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:58:59 LOG5 finish_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2009-Mar-31 20:58:59 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-31 20:58:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-31 20:58:59 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:58:59 LOG5 end_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2009-Mar-31 20:59:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Mar-31 20:59:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.892 1.041 1.033 2009-Mar-31 20:59:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.961 1.055 1.076 2009-Mar-31 20:59:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.054 0.924 1.009 0.892 2009-Mar-31 20:59:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.894 0.103 0.995 0.113 2009-Mar-31 20:59:05 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Mar-31 20:59:05 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift85p2 091000.0 +204100 J 0 Topocentric velocity(optical) 2009-Mar-31 20:59:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift85p2 091000.0 +204100 J 0 Topocentric velocity(optical)' 2009-Mar-31 20:59:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-31 20:59:05 LOG5 begin_task: Level: (1) ID = <10153> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift85p2' 2009-Mar-31 20:59:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-31 20:59:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift85p2} 2009-Mar-31 20:59:05 INFO5 fixed_driftmap: Start: year = 2009.2488004474358 RA = 09:10:33.4 Dec = +20:38:41.1 2009-Mar-31 20:59:05 NOTE fixed_driftmap: Setting ZA to 2:17:27.4 ... 2009-Mar-31 20:59:05 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.29 2009-Mar-31 20:59:05 LOG3 track_source: Calling 'track_source drift85p2 180.0 2.2909559662 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Mar-31 20:59:05 START begin_task: Starting task 'sending tracking commands' 2009-Mar-31 20:59:05 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p2} INFO {Slewing to source 'drift85p2' ...} 2009-Mar-31 20:59:05 INFO1 track_source: Starting to track drift85p2 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: set dec 2.2909559662 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.2909559662 -CF 2009-Mar-31 20:59:05 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:59:05 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-31 20:59:05 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-31 20:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:59:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-31 20:59:05 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:59:05 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-31 20:59:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-31 20:59:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Mar-31 20:59:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-31 20:59:05 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-31 20:59:05 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p2" 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: set dec 2.2909559662 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2.2909559662 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.2909559662 -CF 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-31 20:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-31 20:59:06 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-31 20:59:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-31 20:59:06 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Mar-31 20:59:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-31 20:59:06 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-31 20:59:06 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Mar-31 20:59:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-31 20:59:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:59:06 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-31 20:59:06 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Mar-31 20:59:06 START begin_task: Starting task 'waiting on telescope' 2009-Mar-31 20:59:06 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-31 20:59:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-31 20:59:06 LOG3 waittrk: Start waittrk 5 2009-Mar-31 20:59:06 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-31 20:59:06 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Mar-31 20:59:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-31 20:59:11 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Mar-31 20:59:11 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-31 20:59:11 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-31 20:59:21 INFO2 waittrk: Now tracking drift85p2 2009-Mar-31 20:59:21 LOG4 waittrk: Current telescope position: Az = 179.81 ZA = 2.30 2009-Mar-31 20:59:21 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-31 20:59:21 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-31 20:59:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 START begin_task: Starting task 'selecting calibration type' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-31 20:59:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-31 20:59:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:59:21 START begin_task: Starting task 'waiting on setcal' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-31 20:59:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:59:21 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-31 20:59:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:59:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-31 20:59:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-31 20:59:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:59:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-31 20:59:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-31 20:59:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-31 20:59:21 LOG5 end_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG5 dopset_later: Calling 'dopset_later 6.7229361578311106' 2009-Mar-31 20:59:21 INFO3 dopset_later: Setting Doppler correction for 20:59:28 (6.7 seconds from now) 2009-Mar-31 20:59:21 LOG5 antvel: Calling 'antvel 180.000000 2.290956 F Topocentric 6.7229361578311106' 2009-Mar-31 20:59:21 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.29 to apparent RA = 09:10:33.4 Dec = +20:38:41.1 2009-Mar-31 20:59:21 LOG2 antvel: Parameters to Doppler: Topocentric 89968 2009 90 0.0 2009-Mar-31 20:59:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-31 20:59:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-31 20:59:21 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-31 20:59:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-31 20:59:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-31 20:59:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:59:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:59:21 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-31 20:59:21 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-31 20:59:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-31 20:59:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-31 20:59:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:59:21 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-31 20:59:21 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-31 20:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-31 20:59:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-31 20:59:24 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-31 20:59:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-31 20:59:24 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-31 20:59:24 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-31 20:59:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-31 20:59:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:59:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:59:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:59:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-31 20:59:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-31 20:59:24 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-31 20:59:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-31 20:59:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Mar-31 20:59:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Mar-31 20:59:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-31 20:59:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-31 20:59:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-31 20:59:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-31 20:59:25 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.012 1.111 ALFA beam 1: 1.034 1.033 2009-Mar-31 20:59:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.030 0.988 ALFA beam 3: 1.072 1.091 2009-Mar-31 20:59:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 0.939 ALFA beam 5: 1.009 1.102 2009-Mar-31 20:59:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.911 0.104 ALFA beam 7: 1.008 0.115 2009-Mar-31 20:59:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:59:25 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-31 20:59:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:59:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:59:25 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-31 20:59:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-31 20:59:25 LOG5 finish_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-31 20:59:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-31 20:59:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-31 20:59:25 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Mar-31 20:59:25 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:10:33.4 LST = 09:10:30.7 diff = 2.7 secs 2009-Mar-31 20:59:25 INFO2 fixed_driftmap: Waiting 0.7 seconds for RA 9:10:33 2009-Mar-31 20:59:25 INFO2 lstwait: Already reached requested LST 09:10:31 2009-Mar-31 20:59:25 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-31 20:59:25 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Mar-31 20:59:26 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-31 20:59:26 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Mar-31 20:59:26 LOG4 lstwait: Finished waiting 0.27 seconds late 2009-Mar-31 20:59:26 INFO3 lstwait: Finished waiting 2009-Mar-31 20:59:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-31 20:59:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Brian Kent 2009-Mar-31 20:59:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Brian Kent 2009-Mar-31 20:59:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Brian Kent 2009-Mar-31 20:59:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Brian Kent 2009-Mar-31 20:59:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Mar-31 20:59:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-31 20:59:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-31 20:59:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-31 20:59:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-31 20:59:26 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2009-Mar-31 20:59:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-31 20:59:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-31 20:59:26 INFO2 take_data: Starting WAPP 600-second scan: 909000226 2009-Mar-31 20:59:27 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-31 20:59:27 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Mar-31 20:59:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Brian Kent' 2009-Mar-31 20:59:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20090331.a2010.0024.fits 2009-Mar-31 20:59:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-31 20:59:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.111 1.034 1.033 2009-Mar-31 20:59:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.988 1.072 1.091 2009-Mar-31 20:59:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.939 1.009 1.102 2009-Mar-31 20:59:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.104 1.008 0.115 2009-Mar-31 20:59:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-31 20:59:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090331.a2010.0024.fits} 2009-Mar-31 20:59:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-31 20:59:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3568.00 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1655.000000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1695.000000 MHz 2009-Mar-31 20:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 20:59:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1775.000000 MHz 2009-Mar-31 20:59:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 20:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Mar-31 20:59:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 20:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 20:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Mar-31 20:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.142 (still bad) 2009-Mar-31 20:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.146 (still bad) 2009-Mar-31 20:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.158 (still bad) 2009-Mar-31 20:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.166 (still bad) 2009-Mar-31 20:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.168 (still bad) 2009-Mar-31 20:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 20:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.162 (still bad) 2009-Mar-31 20:59:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.159 (still bad) 2009-Mar-31 20:59:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Mar-31 20:59:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 20:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2009-Mar-31 20:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 20:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.122 (still bad) 2009-Mar-31 20:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Mar-31 21:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Mar-31 21:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.122 (still bad) 2009-Mar-31 21:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 21:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.122 (still bad) 2009-Mar-31 21:00:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.124 (still bad) 2009-Mar-31 21:00:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Mar-31 21:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Mar-31 21:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.123 (still bad) 2009-Mar-31 21:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Mar-31 21:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Mar-31 21:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-31 21:00:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.112 1.039 1.036 2009-Mar-31 21:00:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.958 1.070 1.093 2009-Mar-31 21:00:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.943 1.017 1.110 2009-Mar-31 21:00:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.104 1.010 0.115 2009-Mar-31 21:00:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:00:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Mar-31 21:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Mar-31 21:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:00:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Mar-31 21:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Mar-31 21:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Mar-31 21:01:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 21:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.108 1.041 1.034 2009-Mar-31 21:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.959 1.068 1.097 2009-Mar-31 21:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.945 1.009 1.102 2009-Mar-31 21:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.105 1.006 0.115 2009-Mar-31 21:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Mar-31 21:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 21:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Mar-31 21:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Mar-31 21:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:01:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 21:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Mar-31 21:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Mar-31 21:02:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Mar-31 21:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Mar-31 21:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:02:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 21:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.112 1.036 1.034 2009-Mar-31 21:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.956 1.067 1.094 2009-Mar-31 21:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.941 1.008 1.102 2009-Mar-31 21:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.105 1.004 0.115 2009-Mar-31 21:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Mar-31 21:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Mar-31 21:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Mar-31 21:02:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Mar-31 21:02:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Mar-31 21:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Mar-31 21:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:03:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 21:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.110 1.034 1.033 2009-Mar-31 21:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.956 1.066 1.091 2009-Mar-31 21:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.941 1.009 1.101 2009-Mar-31 21:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.105 1.003 0.115 2009-Mar-31 21:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:03:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:03:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Mar-31 21:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Mar-31 21:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:04:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Mar-31 21:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-31 21:04:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.113 1.037 1.032 2009-Mar-31 21:04:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 0.960 1.068 1.097 2009-Mar-31 21:04:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.946 1.011 1.100 2009-Mar-31 21:04:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.104 1.004 0.115 2009-Mar-31 21:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Mar-31 21:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:04:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-31 21:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Mar-31 21:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:04:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:04:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:04:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:05:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Mar-31 21:05:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Mar-31 21:05:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:05:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:05:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:05:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Mar-31 21:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:05:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:05:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Mar-31 21:05:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:05:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-31 21:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Mar-31 21:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Mar-31 21:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.125 (still bad) 2009-Mar-31 21:05:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Mar-31 21:05:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-31 21:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.115 1.045 1.040 2009-Mar-31 21:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.961 1.069 1.096 2009-Mar-31 21:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.947 1.011 1.101 2009-Mar-31 21:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.104 1.006 0.114 2009-Mar-31 21:05:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:05:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:05:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:05:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:05:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:05:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:05:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:05:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:06:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:06:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:06:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Mar-31 21:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:06:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:06:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:06:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Mar-31 21:06:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:06:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:06:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:06:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:06:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Mar-31 21:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:06:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:06:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Mar-31 21:06:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.116 1.039 1.035 2009-Mar-31 21:06:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.959 1.071 1.097 2009-Mar-31 21:06:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.942 1.012 1.103 2009-Mar-31 21:06:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.105 1.002 0.115 2009-Mar-31 21:06:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:06:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:06:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:06:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Mar-31 21:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Mar-31 21:06:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Mar-31 21:06:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:06:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:06:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:06:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Mar-31 21:06:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:07:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Mar-31 21:07:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:07:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Mar-31 21:07:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Mar-31 21:07:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:07:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Mar-31 21:07:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Mar-31 21:07:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:07:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Mar-31 21:07:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:07:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:07:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Mar-31 21:07:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Mar-31 21:07:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-31 21:07:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.112 1.036 1.030 2009-Mar-31 21:07:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.957 1.066 1.096 2009-Mar-31 21:07:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.942 1.008 1.100 2009-Mar-31 21:07:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.104 1.003 0.115 2009-Mar-31 21:07:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Mar-31 21:07:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-31 21:07:43 INFO