2009-Mar-05 22:16:21 BEGIN executive: CIMA executive starting ... 2009-Mar-05 22:16:21 NOTE executive: STARTING NEW CIMA SESSION 2009-Mar-05 22:16:22 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Mar-05 22:16:22 INFO4 executive: This is an ON-LINE session 2009-Mar-05 22:16:22 INFO4 executive: This is a REMOTE session 2009-Mar-05 22:16:22 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Mar-05 22:16:22 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Drew Brisbin' 2009-Mar-05 22:16:22 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090305' 2009-Mar-05 22:16:22 LOG2 log_preferences: Currently applied preferences: 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(dailylog) = daily 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(datawindow) = open 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(logcolours) = full 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(displayformat) = long 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(logformat) = new 2009-Mar-05 22:16:22 LOG2 log_preferences: prefs(fontsize) = 3 2009-Mar-05 22:16:22 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-05 22:16:22 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-05 22:16:22 ALERT executive: CIMA executive ready 2009-Mar-05 22:16:25 NOTE frontend: CIMA frontend ready 2009-Mar-05 22:16:27 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Mar-05 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:27 LOG4 got_cormsg: From DATATAKING: setup 2009-Mar-05 22:16:33 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Mar-05 22:16:33 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Mar-05 22:16:33 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-05 22:16:33 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-05 22:16:33 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-05 22:16:33 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-05 22:16:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-05 22:16:33 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-05 22:16:33 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-05 22:16:33 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-05 22:16:33 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-05 22:16:33 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-05 22:16:33 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Mar-05 22:16:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:16:33 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-05 22:16:33 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Mar-05 22:16:34 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Mar-05 22:16:34 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-05 22:16:34 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-05 22:16:35 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-05 22:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:16:44 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-05 22:16:44 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-05 22:16:44 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-05 22:16:44 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-05 22:16:44 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-05 22:16:44 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-05 22:16:44 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-05 22:16:44 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-05 22:16:44 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-05 22:16:44 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-05 22:16:48 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-05 22:16:48 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-05 22:16:48 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-05 22:16:48 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-05 22:17:52 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Mar-05 22:18:11 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Mar-05 22:18:11 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-05 22:18:11 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Mar-05 22:18:11 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Mar-05 22:18:11 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-05 22:18:12 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-05 22:18:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Mar-05 22:18:12 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Mar-05 22:18:12 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Mar-05 22:18:12 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-05 22:18:12 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-05 22:18:12 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-05 22:18:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-05 22:18:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-05 22:18:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-05 22:18:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-05 22:18:14 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-05 22:18:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-05 22:18:14 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-05 22:18:14 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-05 22:18:14 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Mar-05 22:18:14 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-05 22:18:14 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-05 22:18:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-05 22:18:14 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-05 22:18:14 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-05 22:18:14 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-05 22:18:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:18:14 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-05 22:18:14 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-05 22:18:14 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-05 22:18:14 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-05 22:18:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-05 22:18:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:18:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:18:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:18:14 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:18:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:18:14 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-05 22:18:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:18:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-05 22:18:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-05 22:18:14 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-05 22:18:15 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-05 22:18:15 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-05 22:18:15 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-05 22:18:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-05 22:18:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:18:15 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-05 22:18:15 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-05 22:18:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:18:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-05 22:18:30 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-05 22:18:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-05 22:18:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-05 22:18:30 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-05 22:18:30 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-05 22:18:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:18:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-05 22:18:30 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-05 22:18:30 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-05 22:18:30 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-05 22:18:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-05 22:18:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-05 22:18:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-05 22:18:31 START begin_task: Starting task 'selecting calibration port' 2009-Mar-05 22:18:31 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-05 22:18:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-05 22:18:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:18:31 START begin_task: Starting task 'waiting on calport' 2009-Mar-05 22:18:31 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:18:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-05 22:18:31 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-05 22:18:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-05 22:18:31 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:18:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:18:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:18:31 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:18:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:18:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:18:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:18:31 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-05 22:18:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-05 22:18:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:18:31 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:18:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:18:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:18:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:18:31 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:18:32 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-05 22:18:32 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:18:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-05 22:18:32 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Mar-05 22:18:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Mar-05 22:18:32 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Mar-05 22:18:32 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Mar-05 22:18:32 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Mar-05 22:18:32 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Mar-05 22:18:32 LOG3 track_source: Calling 'track_source galfasrc 084800.0 +222312 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-05 22:18:32 START begin_task: Starting task 'sending tracking commands' 2009-Mar-05 22:18:32 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-05 22:18:32 INFO1 track_source: Starting to track galfasrc 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: set ra 084800.0 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: set dec +222312 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: pnt tr 084800.0 +222312 -CJ 2009-Mar-05 22:18:32 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:18:32 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-05 22:18:32 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:18:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-05 22:18:32 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Mar-05 22:18:32 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:18:32 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Mar-05 22:18:32 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Mar-05 22:18:32 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Mar-05 22:18:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:18:32 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-05 22:18:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-05 22:18:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-05 22:18:32 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-05 22:18:33 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-05 22:18:33 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-05 22:18:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:18:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20090305.a2010.0031.fits 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-05 22:18:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-05 22:18:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-05 22:18:33 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090305.a2010.0031.fits} 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: set ra 084800.0 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: set dec +222312 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: vw% 084800.0 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: vw% +222312 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: pnt tr 084800.0 +222312 -CJ 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-05 22:18:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:18:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:18:59 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-05 22:18:59 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-05 22:18:59 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-05 22:18:59 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-05 22:18:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-05 22:18:59 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:18:59 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-05 22:18:59 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-05 22:18:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:18:59 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-05 22:18:59 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-05 22:18:59 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Mar-05 22:18:59 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Mar-05 22:18:59 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-05 22:18:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-05 22:18:59 LOG3 waittrk: Start waittrk 5 2009-Mar-05 22:18:59 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-05 22:18:59 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-05 22:19:04 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-05 22:19:04 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-05 22:19:04 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-05 22:19:04 INFO2 waittrk: Now tracking galfasrc 2009-Mar-05 22:19:04 LOG4 waittrk: Current telescope position: Az = 181.99 ZA = 4.02 2009-Mar-05 22:19:04 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-05 22:19:04 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 DONE finish_task: DONE finished waiting: telescope on source 2009-Mar-05 22:19:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:19:04 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-05 22:19:04 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-05 22:19:04 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-05 22:19:04 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Mar-05 22:19:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-05 22:19:05 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-05 22:19:05 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Mar-05 22:19:05 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-05 22:19:05 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Mar-05 22:19:05 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Mar-05 22:19:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Mar-05 22:19:05 START begin_task: Starting task 'selecting calibration type' 2009-Mar-05 22:19:05 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-05 22:19:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-05 22:19:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-05 22:19:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:19:05 START begin_task: Starting task 'waiting on setcal' 2009-Mar-05 22:19:05 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-05 22:19:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-05 22:19:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:19:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-05 22:19:05 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-05 22:19:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-05 22:19:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:19:05 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-05 22:19:05 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:19:05 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-05 22:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:19:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:19:06 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-05 22:19:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:19:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-05 22:19:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:19:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:19:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:19:06 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-05 22:19:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:19:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:19:06 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-05 22:19:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:19:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:19:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-05 22:19:06 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-05 22:19:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:19:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:19:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:19:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:19:06 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090305.a2010.0031.fits' is empty! 2009-Mar-05 22:19:06 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Mar-05 22:19:06 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-05 22:19:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-05 22:19:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:19:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:19:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:19:06 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-05 22:19:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:19:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:19:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:19:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:19:07 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-05 22:19:07 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-05 22:19:07 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:19:07 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-05 22:19:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-05 22:19:07 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-05 22:19:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-05 22:19:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-05 22:19:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:19:07 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-05 22:19:07 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-05 22:19:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-05 22:19:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:19:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:19:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-05 22:19:09 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-05 22:19:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-05 22:19:09 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:19:09 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-05 22:19:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:19:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:19:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:19:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:19:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-05 22:19:10 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-05 22:19:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-05 22:19:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-05 22:19:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-05 22:19:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-05 22:19:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-05 22:19:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-05 22:19:10 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.002 0.906 ALFA beam 1: 1.049 1.050 2009-Mar-05 22:19:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.020 0.962 ALFA beam 3: 1.069 1.084 2009-Mar-05 22:19:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.079 0.957 ALFA beam 5: 1.018 0.978 2009-Mar-05 22:19:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.107 ALFA beam 7: 1.021 0.116 2009-Mar-05 22:19:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:19:10 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-05 22:19:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:19:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:19:10 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-05 22:19:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:19:10 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-05 22:19:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:19:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:19:10 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-05 22:19:10 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-05 22:19:10 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:19:10 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-05 22:19:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:19:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:19:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:19:10 LOG2 antvel: Parameters to Doppler: Topocentric 94750 2009 64 0.0 2009-Mar-05 22:19:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:19:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-05 22:19:10 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-05 22:19:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:19:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:19:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:19:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-05 22:19:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:19:10 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-05 22:19:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:19:11 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.799536 2009.1777685882323 18.999933 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 0 8.799999999999798 22.386666666666670 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 1 8.800977339300637 22.281423256412193 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 2 8.806088197715097 22.348218785128967 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 3 8.805223152524130 22.453702055526236 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 4 8.798955271845299 22.491862472314345 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 5 8.793796174934826 22.423248193122387 2009-Mar-05 22:19:11 LOG4 log_alfabeam: ALFABEAM 6 8.794952674242497 22.318329454205550 2009-Mar-05 22:19:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400173 2009-Mar-05 22:19:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:19:11 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-05 22:19:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:19:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:19:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:19:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8352.00 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:19:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:19:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:19:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.931 1.084 1.072 2009-Mar-05 22:19:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.988 1.144 1.130 2009-Mar-05 22:19:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.957 1.018 0.978 2009-Mar-05 22:19:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.109 1.044 0.119 2009-Mar-05 22:19:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-Mar-05 22:19:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-Mar-05 22:19:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-Mar-05 22:19:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-05 22:19:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:19:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:19:22 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-05 22:19:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:19:22 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-05 22:19:22 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-05 22:19:22 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:19:22 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-05 22:19:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:19:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:19:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:19:22 LOG2 antvel: Parameters to Doppler: Topocentric 94762 2009 64 0.0 2009-Mar-05 22:19:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:19:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-05 22:19:22 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-05 22:19:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:19:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:19:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:19:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-05 22:19:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:19:22 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-05 22:19:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:19:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.802879 2009.1777689684893 18.999933 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 0 8.799999999999907 22.386666666666663 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 1 8.801067515830550 22.281592050836398 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 2 8.806120759027882 22.349226344850774 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 3 8.805165265398676 22.454559409483185 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 4 8.798864984954212 22.491682526508718 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 5 8.793765216538107 22.422221096053239 2009-Mar-05 22:19:22 LOG4 log_alfabeam: ALFABEAM 6 8.795011694543160 22.317500824847734 2009-Mar-05 22:19:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400174 2009-Mar-05 22:19:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:19:23 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-05 22:19:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:19:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:19:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:19:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8364.00 2009-Mar-05 22:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:19:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-05 22:19:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-05 22:19:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-05 22:19:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-05 22:19:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-05 22:19:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:19:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:19:34 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-05 22:19:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:19:34 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-05 22:19:34 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-05 22:19:34 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:19:34 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-05 22:19:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:19:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:19:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:19:34 LOG2 antvel: Parameters to Doppler: Topocentric 94774 2009 64 0.0 2009-Mar-05 22:19:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:19:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-05 22:19:34 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-05 22:19:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:19:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:19:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:19:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-05 22:19:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:19:34 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-05 22:19:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:19:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.806221 2009.1777693487463 18.999933 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 0 8.799999999999612 22.386666666666667 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 1 8.801157563098695 22.281775759885292 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 2 8.806152467891538 22.350239524745891 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 3 8.805106622546601 22.455407397138490 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 4 8.798774846717363 22.491487652535120 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 5 8.793735144555557 22.421188891808946 2009-Mar-05 22:19:34 LOG4 log_alfabeam: ALFABEAM 6 8.795071420306410 22.316681928592782 2009-Mar-05 22:19:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400175 2009-Mar-05 22:19:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:19:35 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-05 22:19:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:19:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:19:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:19:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8376.00 2009-Mar-05 22:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:19:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-05 22:19:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-05 22:19:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Mar-05 22:19:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Mar-05 22:19:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:19:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Mar-05 22:19:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:19:46 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-05 22:19:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:19:46 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-05 22:19:46 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-05 22:19:46 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:19:46 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-05 22:19:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:19:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:19:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:19:46 LOG2 antvel: Parameters to Doppler: Topocentric 94786 2009 64 0.0 2009-Mar-05 22:19:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:19:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-05 22:19:46 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-05 22:19:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:19:46 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:19:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:19:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-05 22:19:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:19:46 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-05 22:19:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:19:46 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.809563 2009.1777697290033 18.999933 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 0 8.800000000002957 22.386666666666699 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 1 8.801247470684054 22.281974373838743 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 2 8.806183319800146 22.351258215673411 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 3 8.805047230018106 22.456245909180275 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 4 8.798684867616023 22.491277866032206 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 5 8.793705962632458 22.420151699947347 2009-Mar-05 22:19:46 LOG4 log_alfabeam: ALFABEAM 6 8.795131844868237 22.315872859538739 2009-Mar-05 22:19:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400176 2009-Mar-05 22:19:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:19:47 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-05 22:19:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:19:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:19:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:19:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8388.00 2009-Mar-05 22:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:19:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:19:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:19:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:19:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:19:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:19:58 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-05 22:19:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:19:58 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-05 22:19:58 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-05 22:19:58 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:19:58 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-05 22:19:58 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:19:58 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:19:58 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:19:58 LOG2 antvel: Parameters to Doppler: Topocentric 94798 2009 64 0.0 2009-Mar-05 22:19:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:19:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-05 22:19:58 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-05 22:19:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:19:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:19:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:19:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-05 22:19:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:19:58 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-05 22:19:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:19:58 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.812906 2009.1777701092606 18.999933 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000402 22.386666666666677 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 1 8.801337228140751 22.282187882413051 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 2 8.806213310270357 22.352282307914560 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 3 8.804987093924797 22.457074836302997 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 4 8.798595058151838 22.491053183213999 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 5 8.793677674401494 22.419109640377751 2009-Mar-05 22:19:58 LOG4 log_alfabeam: ALFABEAM 6 8.795192961546110 22.315073711594589 2009-Mar-05 22:19:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400177 2009-Mar-05 22:19:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:19:59 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-05 22:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:19:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:19:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:19:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:19:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:19:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8400.00 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:20:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:20:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:20:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:20:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:20:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:20:10 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-05 22:20:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:20:10 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-05 22:20:10 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-05 22:20:10 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:20:10 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-05 22:20:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:20:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:20:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:20:10 LOG2 antvel: Parameters to Doppler: Topocentric 94810 2009 64 0.0 2009-Mar-05 22:20:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:20:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-05 22:20:10 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-05 22:20:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:20:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:20:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:20:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-05 22:20:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:20:10 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-05 22:20:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:20:10 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.816248 2009.1777704895176 18.999933 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000045 22.386666666666663 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 1 8.801426744716737 22.282416063243588 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 2 8.806242409092915 22.353310765597136 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 3 8.804926275346499 22.457893338840361 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 4 8.798505509136431 22.490813842399316 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 5 8.793650307615252 22.418063774311808 2009-Mar-05 22:20:10 LOG4 log_alfabeam: ALFABEAM 6 8.795254707880884 22.314285281716845 2009-Mar-05 22:20:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400178 2009-Mar-05 22:20:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:20:11 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-05 22:20:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:20:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:20:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:20:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:20:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8412.00 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:20:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:20:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.906 1.045 1.050 2009-Mar-05 22:20:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.963 1.083 1.107 2009-Mar-05 22:20:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.978 1.005 0.993 2009-Mar-05 22:20:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.109 1.035 0.119 2009-Mar-05 22:20:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-05 22:20:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-05 22:20:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:20:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:20:22 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-05 22:20:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:20:22 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-05 22:20:22 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-05 22:20:22 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:20:22 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-05 22:20:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:20:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:20:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:20:22 LOG2 antvel: Parameters to Doppler: Topocentric 94822 2009 64 0.0 2009-Mar-05 22:20:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:20:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-05 22:20:22 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-05 22:20:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:20:22 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:20:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:20:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-05 22:20:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:20:22 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-05 22:20:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:20:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.819591 2009.1777708697746 18.999933 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 0 8.799999999999965 22.386666666666667 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 1 8.801516037210826 22.282658940168076 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 2 8.806270622498431 22.354343775391175 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 3 8.804864763853557 22.458701575544136 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 4 8.798416203754076 22.490559822314403 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 5 8.793623855595206 22.417013918321882 2009-Mar-05 22:20:22 LOG4 log_alfabeam: ALFABEAM 6 8.795317094164796 22.313507403779383 2009-Mar-05 22:20:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400179 2009-Mar-05 22:20:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:20:23 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-05 22:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:20:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:20:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:20:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8424.00 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:20:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-05 22:20:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-05 22:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-05 22:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-05 22:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-05 22:20:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:20:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:20:34 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-05 22:20:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:20:34 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-05 22:20:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-05 22:20:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-05 22:20:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-05 22:20:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:20:34 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-05 22:20:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:20:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-05 22:20:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:20:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:20:34 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-05 22:20:34 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-05 22:20:34 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:20:34 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-05 22:20:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:20:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:20:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:20:34 LOG2 antvel: Parameters to Doppler: Topocentric 94834 2009 64 0.0 2009-Mar-05 22:20:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:20:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-05 22:20:34 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-05 22:20:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:20:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:20:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:20:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-05 22:20:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:20:34 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-05 22:20:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:20:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.822933 2009.1777712500316 18.999933 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000161 22.386666666666667 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 1 8.801605015817879 22.282916237442162 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 2 8.806297923556031 22.355380286105849 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 3 8.804802622993050 22.459498745398488 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 4 8.798327231786599 22.490291414552999 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 5 8.793598342703632 22.415961146361116 2009-Mar-05 22:20:34 LOG4 log_alfabeam: ALFABEAM 6 8.795380055722243 22.312740834877726 2009-Mar-05 22:20:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400180 2009-Mar-05 22:20:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:20:35 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-05 22:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:20:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:20:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:20:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8436.00 2009-Mar-05 22:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.601 (still bad) 2009-Mar-05 22:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.603 (still bad) 2009-Mar-05 22:20:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.601 (still bad) 2009-Mar-05 22:20:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.601 (still bad) 2009-Mar-05 22:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.601 (still bad) 2009-Mar-05 22:20:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:20:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:20:46 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-05 22:20:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:20:46 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-05 22:20:46 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-05 22:20:46 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:20:46 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-05 22:20:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:20:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:20:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:20:46 LOG2 antvel: Parameters to Doppler: Topocentric 94846 2009 64 0.0 2009-Mar-05 22:20:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:20:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-05 22:20:46 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-05 22:20:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:20:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:20:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:20:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-05 22:20:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:20:46 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-05 22:20:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:20:46 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.826276 2009.1777716302886 18.999933 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000095 22.386666666666667 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 1 8.801693697832761 22.283187961109160 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 2 8.806324319668001 22.356420481047390 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 3 8.804739843070079 22.460285021951709 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 4 8.798238575878319 22.490008615528716 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 5 8.793573761040985 22.414905277078024 2009-Mar-05 22:20:46 LOG4 log_alfabeam: ALFABEAM 6 8.795443602224372 22.311985393684601 2009-Mar-05 22:20:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400181 2009-Mar-05 22:20:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:20:47 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-05 22:20:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:20:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:20:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:20:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8448.00 2009-Mar-05 22:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.600 (still bad) 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:20:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.591 (still bad) 2009-Mar-05 22:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-05 22:20:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.591 (still bad) 2009-Mar-05 22:20:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.590 (still bad) 2009-Mar-05 22:20:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:20:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:20:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:20:58 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-05 22:20:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:20:58 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-05 22:20:58 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-05 22:20:58 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:20:58 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-05 22:20:58 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:20:58 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:20:58 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:20:58 LOG2 antvel: Parameters to Doppler: Topocentric 94858 2009 64 0.0 2009-Mar-05 22:20:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:20:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-05 22:20:58 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-05 22:20:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:20:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:20:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:20:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-05 22:20:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:20:58 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-05 22:20:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:20:58 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.829618 2009.1777720105458 18.999933 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000079 22.386666666666677 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 1 8.801781994778711 22.283473783684396 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 2 8.806349787257744 22.357463298369645 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 3 8.804676489799592 22.461059646056597 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 4 8.798150324395463 22.489711768348904 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 5 8.793550131501824 22.413847392348409 2009-Mar-05 22:20:58 LOG4 log_alfabeam: ALFABEAM 6 8.795507667075496 22.311241794566964 2009-Mar-05 22:20:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400182 2009-Mar-05 22:20:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:20:59 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-05 22:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-05 22:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:20:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:20:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:20:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:20:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8460.00 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.591 (still bad) 2009-Mar-05 22:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:21:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.585 (still bad) 2009-Mar-05 22:21:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.584 (still bad) 2009-Mar-05 22:21:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.587 (still bad) 2009-Mar-05 22:21:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:21:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:21:10 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-05 22:21:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:21:10 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-05 22:21:10 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-05 22:21:10 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:21:10 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-05 22:21:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:21:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:21:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:21:10 LOG2 antvel: Parameters to Doppler: Topocentric 94870 2009 64 0.0 2009-Mar-05 22:21:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:21:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-05 22:21:10 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-05 22:21:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:21:10 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:21:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:21:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-05 22:21:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:21:10 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-05 22:21:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:21:10 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.832961 2009.1777723908028 18.999933 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000043 22.386666666666670 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 1 8.801869924648971 22.283773694623086 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 2 8.806374334929956 22.358508920631014 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 3 8.804612554047665 22.461822807586181 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 4 8.798062459244935 22.489400885831529 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 5 8.793527444950847 22.412787310200965 2009-Mar-05 22:21:10 LOG4 log_alfabeam: ALFABEAM 6 8.795572259505350 22.310509839698661 2009-Mar-05 22:21:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400183 2009-Mar-05 22:21:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:21:11 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-05 22:21:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:21:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:21:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.584 (still bad) 2009-Mar-05 22:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8472.00 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.584 (still bad) 2009-Mar-05 22:21:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.569 (still bad) 2009-Mar-05 22:21:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:21:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.424 1.254 1.466 1.455 2009-Mar-05 22:21:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.440 1.352 1.552 1.546 2009-Mar-05 22:21:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.571 1.391 1.462 1.350 2009-Mar-05 22:21:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.349 0.110 1.488 0.120 2009-Mar-05 22:21:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.570 (still bad) 2009-Mar-05 22:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.569 (still bad) 2009-Mar-05 22:21:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:21:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:21:22 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-05 22:21:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:21:22 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-05 22:21:22 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-05 22:21:22 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:21:22 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-05 22:21:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:21:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:21:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:21:22 LOG2 antvel: Parameters to Doppler: Topocentric 94882 2009 64 0.0 2009-Mar-05 22:21:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:21:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-05 22:21:22 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-05 22:21:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:21:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:21:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:21:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-05 22:21:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:21:22 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-05 22:21:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:21:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.836303 2009.1777727710598 18.999933 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000026 22.386666666666681 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 1 8.801957400658882 22.284087316878260 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 2 8.806397942524271 22.359556280059373 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 3 8.804548103380528 22.462573791993993 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 4 8.797975067015031 22.489076360302157 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 5 8.793505718781113 22.411726115589158 2009-Mar-05 22:21:22 LOG4 log_alfabeam: ALFABEAM 6 8.795637311317927 22.309790198344054 2009-Mar-05 22:21:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400184 2009-Mar-05 22:21:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:21:23 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-05 22:21:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:21:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:21:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.571 (still bad) 2009-Mar-05 22:21:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8484.00 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.571 (still bad) 2009-Mar-05 22:21:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.543 (still bad) 2009-Mar-05 22:21:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.542 (still bad) 2009-Mar-05 22:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.542 (still bad) 2009-Mar-05 22:21:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:21:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:21:34 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-05 22:21:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:21:34 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-05 22:21:34 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-05 22:21:34 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:21:34 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-05 22:21:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:21:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:21:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:21:34 LOG2 antvel: Parameters to Doppler: Topocentric 94894 2009 64 0.0 2009-Mar-05 22:21:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-05 22:21:34 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-05 22:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-05 22:21:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:21:34 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-05 22:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:21:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.839646 2009.1777731513168 18.999933 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000054 22.386666666666681 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 1 8.802044441684849 22.284414624880284 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 2 8.806420619851146 22.360605561088231 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 3 8.804483129038385 22.463312806644346 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 4 8.797888128691364 22.488738219348090 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 5 8.793484942630965 22.410663623249675 2009-Mar-05 22:21:34 LOG4 log_alfabeam: ALFABEAM 6 8.795702831487676 22.309082655243451 2009-Mar-05 22:21:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400185 2009-Mar-05 22:21:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:21:35 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-05 22:21:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:21:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:21:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8496.00 2009-Mar-05 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.543 (still bad) 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-Mar-05 22:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.542 (still bad) 2009-Mar-05 22:21:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-Mar-05 22:21:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:21:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:21:46 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-05 22:21:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:21:46 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-05 22:21:46 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-05 22:21:46 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:21:46 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-05 22:21:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:21:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:21:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:21:46 LOG2 antvel: Parameters to Doppler: Topocentric 94906 2009 64 0.0 2009-Mar-05 22:21:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:21:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-05 22:21:46 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-05 22:21:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:21:46 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:21:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:21:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-05 22:21:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:21:46 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-05 22:21:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:21:46 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.842988 2009.1777735315738 18.999933 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000038 22.386666666666667 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 1 8.802130962974420 22.284755194690668 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 2 8.806442350185399 22.361655694736619 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 3 8.804417700108235 22.464039183801916 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 4 8.797801728748444 22.488386901731886 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 5 8.793465130396582 22.409600916422011 2009-Mar-05 22:21:46 LOG4 log_alfabeam: ALFABEAM 6 8.795768750548726 22.308387832705765 2009-Mar-05 22:21:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400186 2009-Mar-05 22:21:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:21:47 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-05 22:21:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:21:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:21:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:21:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8508.00 2009-Mar-05 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:21:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.534 (still bad) 2009-Mar-05 22:21:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.533 (still bad) 2009-Mar-05 22:21:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.533 (still bad) 2009-Mar-05 22:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.535 (still bad) 2009-Mar-05 22:21:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.534 (still bad) 2009-Mar-05 22:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:21:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:21:58 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-05 22:21:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:21:58 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-05 22:21:58 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Mar-05 22:21:58 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-05 22:21:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-05 22:21:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:21:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:21:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:21:58 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-05 22:21:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:21:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:21:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:21:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:21:58 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-05 22:21:58 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-05 22:21:58 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-05 22:21:58 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:21:58 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-05 22:21:58 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:21:58 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:21:58 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:21:58 LOG2 antvel: Parameters to Doppler: Topocentric 94918 2009 64 0.0 2009-Mar-05 22:21:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:21:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-05 22:21:58 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-05 22:21:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:21:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:21:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:21:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-05 22:21:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:21:58 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-05 22:21:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:21:59 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.846331 2009.1777739118311 18.999933 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000066 22.386666666666667 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 1 8.802216984453086 22.285108987592583 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 2 8.806463144522304 22.362706869880657 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 3 8.804351808010855 22.464753149105018 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 4 8.797715847088032 22.488022447867774 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 5 8.793446270525980 22.408537803965736 2009-Mar-05 22:21:59 LOG4 log_alfabeam: ALFABEAM 6 8.795835077411693 22.307705497482878 2009-Mar-05 22:21:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400187 2009-Mar-05 22:21:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:21:59 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-05 22:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:21:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-05 22:21:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8520.00 2009-Mar-05 22:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.534 (still bad) 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-Mar-05 22:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-05 22:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-05 22:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-05 22:22:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:22:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:22:10 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-05 22:22:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:22:10 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-05 22:22:10 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-05 22:22:10 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:22:10 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-05 22:22:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:22:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:22:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:22:10 LOG2 antvel: Parameters to Doppler: Topocentric 94930 2009 64 0.0 2009-Mar-05 22:22:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:22:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-05 22:22:10 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-05 22:22:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:22:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:22:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:22:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-05 22:22:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:22:10 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-05 22:22:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:22:10 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.849673 2009.1777742920881 18.999933 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000074 22.386666666666667 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 1 8.802302423710914 22.285475535862446 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 2 8.806482989553123 22.363758020958358 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 3 8.804285523013785 22.465454083295079 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 4 8.797630565764271 22.487645339747623 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 5 8.793428373459905 22.407475362745920 2009-Mar-05 22:22:10 LOG4 log_alfabeam: ALFABEAM 6 8.795901741677127 22.307036223612613 2009-Mar-05 22:22:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400188 2009-Mar-05 22:22:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:22:11 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-05 22:22:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:22:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-05 22:22:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-05 22:22:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8532.00 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Mar-05 22:22:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Mar-05 22:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-05 22:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:22:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.923 1.072 1.067 2009-Mar-05 22:22:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.978 1.124 1.127 2009-Mar-05 22:22:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.997 1.056 1.019 2009-Mar-05 22:22:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.110 1.050 0.120 2009-Mar-05 22:22:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Mar-05 22:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:22:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:22:22 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-05 22:22:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:22:22 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-05 22:22:22 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-05 22:22:22 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:22:22 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-05 22:22:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:22:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17777 J 2009-Mar-05 22:22:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:22:22 LOG2 antvel: Parameters to Doppler: Topocentric 94942 2009 64 0.0 2009-Mar-05 22:22:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:22:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-05 22:22:22 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-05 22:22:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:22:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:22:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-05 22:22:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:22:22 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-05 22:22:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:22:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.853015 2009.1777746723451 18.999933 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000052 22.386666666666663 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 1 8.802387276565135 22.285854674474120 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 2 8.806501891897160 22.364809029321286 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 3 8.804218856525036 22.466142026785636 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 4 8.797545888700268 22.487255746828861 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 5 8.793411431443245 22.406413710812870 2009-Mar-05 22:22:22 LOG4 log_alfabeam: ALFABEAM 6 8.795968732291358 22.306379954096933 2009-Mar-05 22:22:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400189 2009-Mar-05 22:22:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:22:23 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-05 22:22:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Mar-05 22:22:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-05 22:22:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8544.00 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Mar-05 22:22:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Mar-05 22:22:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-05 22:22:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Mar-05 22:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-05 22:22:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:22:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:22:34 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-05 22:22:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:22:34 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-05 22:22:34 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-05 22:22:34 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:22:34 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-05 22:22:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:22:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:22:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:22:34 LOG2 antvel: Parameters to Doppler: Topocentric 94954 2009 64 0.0 2009-Mar-05 22:22:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:22:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-05 22:22:34 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-05 22:22:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:22:34 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:22:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:22:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-05 22:22:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:22:34 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-05 22:22:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:22:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.856358 2009.1777750526021 18.999933 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000079 22.386666666666677 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 1 8.802471539123218 22.286246241304170 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 2 8.806519858154472 22.365859780553077 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 3 8.804151819643419 22.466817021568591 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 4 8.797461819525994 22.486853835522222 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 5 8.793395436757475 22.405352961675586 2009-Mar-05 22:22:34 LOG4 log_alfabeam: ALFABEAM 6 8.796036038529921 22.305736630695595 2009-Mar-05 22:22:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400190 2009-Mar-05 22:22:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:22:35 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-05 22:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:22:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:22:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-05 22:22:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8556.00 2009-Mar-05 22:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:22:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-Mar-05 22:22:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:22:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:22:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:22:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:22:46 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-05 22:22:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:22:46 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-05 22:22:46 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-05 22:22:46 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:22:46 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-05 22:22:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:22:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:22:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:22:46 LOG2 antvel: Parameters to Doppler: Topocentric 94966 2009 64 0.0 2009-Mar-05 22:22:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:22:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-05 22:22:46 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-05 22:22:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:22:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:22:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:22:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-05 22:22:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:22:46 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-05 22:22:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:22:46 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.859700 2009.1777754328591 18.999933 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000075 22.386666666666670 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 1 8.802555132997089 22.286649709567477 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 2 8.806536880031086 22.366909222521308 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 3 8.804084483765385 22.467478523007809 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 4 8.797378436166717 22.486440145882039 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 5 8.793380394814051 22.404294174364694 2009-Mar-05 22:22:46 LOG4 log_alfabeam: ALFABEAM 6 8.796103589221378 22.305106753755659 2009-Mar-05 22:22:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400191 2009-Mar-05 22:22:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:22:47 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-05 22:22:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:22:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:22:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-05 22:22:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8568.00 2009-Mar-05 22:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:22:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:22:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:22:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:22:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:22:58 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-05 22:22:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:22:58 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-05 22:22:58 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-05 22:22:58 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:22:58 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-05 22:22:58 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:22:58 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:22:58 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:22:58 LOG2 antvel: Parameters to Doppler: Topocentric 94978 2009 64 0.0 2009-Mar-05 22:22:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:22:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-05 22:22:58 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-05 22:22:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:22:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:22:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:22:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-05 22:22:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:22:58 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-05 22:22:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:22:58 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.863043 2009.1777758131163 18.999933 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000033 22.386666666666667 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 1 8.802638081299072 22.287065017483439 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 2 8.806552971233746 22.367957565563596 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 3 8.804016839912745 22.468126803271680 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 4 8.797295715267078 22.486014740355788 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 5 8.793366291398810 22.403237132813761 2009-Mar-05 22:22:58 LOG4 log_alfabeam: ALFABEAM 6 8.796171393939948 22.304490045126521 2009-Mar-05 22:22:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400192 2009-Mar-05 22:22:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:22:59 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-05 22:22:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:22:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:22:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:22:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-05 22:22:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8580.00 2009-Mar-05 22:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-05 22:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-05 22:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-05 22:23:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:23:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:23:10 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-05 22:23:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:23:10 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-05 22:23:10 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-05 22:23:10 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:23:10 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-05 22:23:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:23:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:23:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:23:10 LOG2 antvel: Parameters to Doppler: Topocentric 94990 2009 64 0.0 2009-Mar-05 22:23:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:23:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-05 22:23:10 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-05 22:23:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:23:10 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:23:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:23:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-05 22:23:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:23:10 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-05 22:23:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:23:10 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.866385 2009.1777761933733 18.999933 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000026 22.386666666666663 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 1 8.802720308607913 22.287491603704968 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 2 8.806568126691310 22.369003771679036 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 3 8.803948959812184 22.468761367951966 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 4 8.797213731722049 22.485578192801480 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 5 8.793353128717992 22.402182879059797 2009-Mar-05 22:23:10 LOG4 log_alfabeam: ALFABEAM 6 8.796239381408272 22.303886955931628 2009-Mar-05 22:23:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400193 2009-Mar-05 22:23:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:23:11 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-05 22:23:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:23:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-Mar-05 22:23:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-05 22:23:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8592.00 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-05 22:23:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-Mar-05 22:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-05 22:23:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-Mar-05 22:23:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:23:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.899 1.035 1.042 2009-Mar-05 22:23:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.958 1.071 1.101 2009-Mar-05 22:23:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.976 0.991 0.988 2009-Mar-05 22:23:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.109 1.029 0.119 2009-Mar-05 22:23:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:23:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:23:22 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-05 22:23:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:23:22 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-05 22:23:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-05 22:23:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-05 22:23:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-05 22:23:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:23:22 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-05 22:23:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:23:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-05 22:23:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:23:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:23:22 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-05 22:23:22 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-05 22:23:22 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:23:22 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-05 22:23:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:23:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:23:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:23:22 LOG2 antvel: Parameters to Doppler: Topocentric 95002 2009 64 0.0 2009-Mar-05 22:23:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:23:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-05 22:23:22 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-05 22:23:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:23:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:23:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:23:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-05 22:23:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:23:22 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-05 22:23:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:23:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.869728 2009.1777765736304 18.999933 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000061 22.386666666666667 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 1 8.802801839464342 22.287929401571727 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 2 8.806582361038755 22.370048063403988 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 3 8.803880834000083 22.469382507167211 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 4 8.797132460727559 22.485130570068570 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 5 8.793340891672495 22.401131183574218 2009-Mar-05 22:23:22 LOG4 log_alfabeam: ALFABEAM 6 8.796307561775711 22.303297191037782 2009-Mar-05 22:23:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400194 2009-Mar-05 22:23:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:23:23 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-05 22:23:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:23:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-05 22:23:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-05 22:23:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-05 22:23:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8604.00 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.603 (still bad) 2009-Mar-05 22:23:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.605 (still bad) 2009-Mar-05 22:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.605 (still bad) 2009-Mar-05 22:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.603 (still bad) 2009-Mar-05 22:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.604 (still bad) 2009-Mar-05 22:23:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:23:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:23:34 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-05 22:23:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:23:34 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-05 22:23:34 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-05 22:23:34 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:23:34 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-05 22:23:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:23:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:23:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:23:34 LOG2 antvel: Parameters to Doppler: Topocentric 95014 2009 64 0.0 2009-Mar-05 22:23:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:23:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-05 22:23:34 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-05 22:23:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:23:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:23:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:23:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-05 22:23:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:23:34 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-05 22:23:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:23:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.873070 2009.1777769538874 18.999933 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000038 22.386666666666663 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 1 8.802882601596611 22.288377819250382 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 2 8.806595672297865 22.371089420653767 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 3 8.803812534207486 22.469989776508363 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 4 8.797051973972295 22.484672475684807 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 5 8.793329579413131 22.400083067716096 2009-Mar-05 22:23:34 LOG4 log_alfabeam: ALFABEAM 6 8.796375863971424 22.302721152847699 2009-Mar-05 22:23:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400195 2009-Mar-05 22:23:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:23:35 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-05 22:23:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:23:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-05 22:23:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-05 22:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.605 (still bad) 2009-Mar-05 22:23:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8616.00 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-05 22:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-05 22:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-05 22:23:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-05 22:23:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-05 22:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:23:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:23:46 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-05 22:23:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:23:46 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-05 22:23:46 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-05 22:23:46 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:23:46 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-05 22:23:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:23:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:23:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:23:46 LOG2 antvel: Parameters to Doppler: Topocentric 95026 2009 64 0.0 2009-Mar-05 22:23:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:23:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-05 22:23:46 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-05 22:23:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:23:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:23:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:23:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-05 22:23:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:23:46 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-05 22:23:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:23:46 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.876413 2009.1777773341446 18.999933 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000026 22.386666666666667 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 1 8.802962621018452 22.288836787800484 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 2 8.806608075916097 22.372128079845183 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 3 8.803744050315546 22.470583483137947 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 4 8.796972245163857 22.484203978280284 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 5 8.793319176083731 22.399038286918948 2009-Mar-05 22:23:46 LOG4 log_alfabeam: ALFABEAM 6 8.796444298878002 22.302158530296499 2009-Mar-05 22:23:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400196 2009-Mar-05 22:23:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:23:47 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-05 22:23:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:23:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-05 22:23:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-05 22:23:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8628.00 2009-Mar-05 22:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:23:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.587 (still bad) 2009-Mar-05 22:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:23:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:23:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:23:58 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-05 22:23:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:23:58 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-05 22:23:58 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-05 22:23:58 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:23:58 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-05 22:23:58 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:23:58 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:23:58 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:23:58 LOG2 antvel: Parameters to Doppler: Topocentric 95038 2009 64 0.0 2009-Mar-05 22:23:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:23:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-05 22:23:58 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-05 22:23:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:23:58 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-05 22:23:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:23:58 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-05 22:23:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:23:58 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.879755 2009.1777777144016 18.999933 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000047 22.386666666666670 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 1 8.803041828750642 22.289305689084166 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 2 8.806619572854336 22.373163042238154 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 3 8.803675453749634 22.471163231931126 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 4 8.796893342649373 22.483725706827155 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 5 8.793309677952802 22.397997838566720 2009-Mar-05 22:23:58 LOG4 log_alfabeam: ALFABEAM 6 8.796512795926052 22.301609678023990 2009-Mar-05 22:23:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400197 2009-Mar-05 22:23:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:23:59 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-05 22:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:23:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:23:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-05 22:23:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:23:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-05 22:23:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8640.00 2009-Mar-05 22:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.572 (still bad) 2009-Mar-05 22:24:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.572 (still bad) 2009-Mar-05 22:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.570 (still bad) 2009-Mar-05 22:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.572 (still bad) 2009-Mar-05 22:24:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.570 (still bad) 2009-Mar-05 22:24:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:24:10 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-05 22:24:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:24:10 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-05 22:24:10 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-05 22:24:10 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:24:10 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-05 22:24:10 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:24:10 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:24:10 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:24:10 LOG2 antvel: Parameters to Doppler: Topocentric 95050 2009 64 0.0 2009-Mar-05 22:24:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:24:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-05 22:24:10 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-05 22:24:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:24:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:24:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:24:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-05 22:24:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:24:10 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-05 22:24:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:24:10 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.883098 2009.1777780946586 18.999933 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000029 22.386666666666663 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 1 8.803120252295754 22.289784454475090 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 2 8.806630179242953 22.374194559517623 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 3 8.803606733581152 22.471729345881332 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 4 8.796815238636913 22.483237729130504 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 5 8.793301068545986 22.396961461792021 2009-Mar-05 22:24:10 LOG4 log_alfabeam: ALFABEAM 6 8.796581366872667 22.301074270363756 2009-Mar-05 22:24:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400198 2009-Mar-05 22:24:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:24:11 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-05 22:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:24:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-05 22:24:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-05 22:24:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8652.00 2009-Mar-05 22:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.570 (still bad) 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:24:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-Mar-05 22:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-Mar-05 22:24:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.542 (still bad) 2009-Mar-05 22:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:24:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:24:22 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-05 22:24:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:24:22 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-05 22:24:22 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-05 22:24:22 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:24:22 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-05 22:24:22 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:24:22 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:24:22 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:24:22 LOG2 antvel: Parameters to Doppler: Topocentric 95062 2009 64 0.0 2009-Mar-05 22:24:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:24:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-05 22:24:22 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-05 22:24:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:24:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:24:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:24:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-05 22:24:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:24:22 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-05 22:24:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:24:22 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.886440 2009.1777784749156 18.999933 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000031 22.386666666666667 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 1 8.803197826069944 22.290272443743813 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 2 8.806639898807409 22.375221657327540 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 3 8.803537960638813 22.472281477989021 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 4 8.796737998036338 22.482740695363560 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 5 8.793293341441109 22.395930127121186 2009-Mar-05 22:24:22 LOG4 log_alfabeam: ALFABEAM 6 8.796649941923791 22.300552615559418 2009-Mar-05 22:24:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400199 2009-Mar-05 22:24:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:24:23 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-05 22:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:24:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-05 22:24:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:24:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.392 1.243 1.432 1.440 2009-Mar-05 22:24:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.428 1.342 1.512 1.530 2009-Mar-05 22:24:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.543 1.382 1.414 1.331 2009-Mar-05 22:24:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.333 0.109 1.471 0.119 2009-Mar-05 22:24:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-05 22:24:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8664.00 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.544 (still bad) 2009-Mar-05 22:24:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.536 (still bad) 2009-Mar-05 22:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.535 (still bad) 2009-Mar-05 22:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.536 (still bad) 2009-Mar-05 22:24:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.536 (still bad) 2009-Mar-05 22:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:24:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:24:34 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-05 22:24:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:24:34 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-05 22:24:34 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-05 22:24:34 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:24:34 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-05 22:24:34 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:24:34 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:24:34 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:24:34 LOG2 antvel: Parameters to Doppler: Topocentric 95074 2009 64 0.0 2009-Mar-05 22:24:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:24:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-05 22:24:34 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-05 22:24:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:24:34 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:24:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:24:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-05 22:24:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-05 22:24:34 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-05 22:24:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:24:34 LOG5 log_alfabeam: Parameters: 8.8000000000000007 22.386666666666667 8.889783 2009.1777788551726 18.999933 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 0 8.800000000000047 22.386666666666670 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 1 8.803274579053314 22.290769591111523 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 2 8.806648748222123 22.376244603699107 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 3 8.803469123048540 22.472819965600543 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 4 8.796661591573075 22.482234669972762 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 5 8.793286479693291 22.394903556447868 2009-Mar-05 22:24:34 LOG4 log_alfabeam: ALFABEAM 6 8.796718533833483 22.300044374910165 2009-Mar-05 22:24:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906400200 2009-Mar-05 22:24:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-05 22:24:35 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-05 22:24:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:24:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-05 22:24:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.535 (still bad) 2009-Mar-05 22:24:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-05 22:24:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8676.00 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.535 (still bad) 2009-Mar-05 22:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.532 (still bad) 2009-Mar-05 22:24:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.531 (still bad) 2009-Mar-05 22:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.531 (still bad) 2009-Mar-05 22:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.532 (still bad) 2009-Mar-05 22:24:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:24:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-05 22:24:46 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-05 22:24:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-05 22:24:46 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-05 22:24:46 INFO2 smartfreq: Switching off CAL 2009-Mar-05 22:24:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:24:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:24:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:24:46 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-05 22:24:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:24:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:24:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:24:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:24:46 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-05 22:24:46 INFO3 restore_frequencies: Restoring original frequencies 2009-Mar-05 22:24:46 LOG5 antvel: Calling 'antvel 84800.000000 222312.000000 J Topocentric 0' 2009-Mar-05 22:24:46 LOG2 antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:24:46 LOG2 antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:24:46 LOG2 antvel: Parameters to Doppler: Topocentric 95086 2009 64 0.0 2009-Mar-05 22:24:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:24:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-05 22:24:46 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-05 22:24:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:24:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:24:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:24:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:46 STOP finish_task: Finishing task 'smart frequency switching' 2009-Mar-05 22:24:46 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-05 22:24:46 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Mar-05 22:24:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:24:47 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Mar-05 22:24:47 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-05 22:24:47 NOTE run_command_file: DONE with command file processing 2009-Mar-05 22:24:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-05 22:24:47 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-05 22:24:47 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-05 22:24:47 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Mar-05 22:24:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:24:47 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Mar-05 22:24:47 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-05 22:24:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:24:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.531 (still bad) 2009-Mar-05 22:25:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-05 22:25:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-05 22:25:01 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-05 22:25:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-05 22:25:01 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-05 22:25:02 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-05 22:25:02 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-05 22:25:02 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-05 22:25:02 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-05 22:25:02 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-05 22:25:02 LOG3 exec_msg: Closing socket 2009-Mar-05 22:25:02 LOG3 exec_msg: Closing socket 2009-Mar-05 22:25:02 LOG3 exec_msg: Closing socket 2009-Mar-05 22:25:02 LOG3 exec_msg: Closing socket 2009-Mar-05 22:25:04 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-05 22:25:04 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-05 22:25:04 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-05 22:25:04 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-05 22:25:19 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Mar-05 22:25:20 LOG2 CIMA-antvel: Precessing RA = 08:48:00.0 Dec = +22:23:12.0 Epoch = 2009.17778 J 2009-Mar-05 22:25:20 LOG2 CIMA-antvel: Computed apparent RA = 08:48:34.2 Dec = +22:21:05.9 2009-Mar-05 22:25:20 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 95120 2009 64 0.0 2009-Mar-05 22:25:20 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-05 22:25:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-05 22:25:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-05 22:25:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-05 22:25:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-05 22:25:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-05 22:25:22 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-05 22:25:22 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-05 22:25:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-05 22:25:22 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-05 22:25:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-05 22:25:22 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-05 22:25:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:25:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:25:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:25:22 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:25:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:25:22 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:25:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:25:22 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-05 22:25:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-05 22:25:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-05 22:25:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-05 22:25:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-05 22:25:22 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-05 22:25:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-05 22:25:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-05 22:25:22 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-05 22:25:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-05 22:25:22 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-05 22:25:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-05 22:25:22 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-05 22:25:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:25:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-05 22:25:22 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-05 22:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-05 22:25:23 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-05 22:25:23 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-05 22:25:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-05 22:25:23 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-05 22:25:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-05 22:25:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-05 22:25:23 START begin_task: Starting task 'selecting calibration port' 2009-Mar-05 22:25:23 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-05 22:25:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-05 22:25:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:23 START begin_task: Starting task 'waiting on calport' 2009-Mar-05 22:25:23 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Mar-05 22:25:23 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-05 22:25:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:25:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-05 22:25:23 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-05 22:25:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-05 22:25:23 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:25:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:25:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:25:23 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-05 22:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:25:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:25:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:25:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:25:23 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:25:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:25:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-05 22:25:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-05 22:25:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:25:24 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-05 22:25:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-05 22:25:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:25:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:25:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:25:24 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-05 22:25:24 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-05 22:25:24 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-05 22:25:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:25:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-05 22:25:24 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-05 22:25:24 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Mar-05 22:25:24 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Mar-05 22:25:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:25:24 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-05 22:25:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-05 22:25:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-05 22:25:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:25:24 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-05 22:25:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-05 22:25:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:25:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-05 22:25:24 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-05 22:25:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-05 22:25:25 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-05 22:25:25 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Mar-05 22:25:32 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Mar-05 22:25:32 LOG4 exec_msg: From OBSERVER: track_new_source drift92p2 085500.0 +222312 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Mar-05 22:25:32 LOG1 track_new_source: Calling 'track_new_source drift92p2 085500.0 +222312 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Mar-05 22:25:32 BEGIN begin_task: Starting task 'selecting new source' 2009-Mar-05 22:25:32 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-05 22:25:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift92p2} INFO {Selecting source 'drift92p2' ...} 2009-Mar-05 22:25:32 LOG3 track_source: Calling 'track_source drift92p2 085500.0 +222312 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-05 22:25:32 START begin_task: Starting task 'sending tracking commands' 2009-Mar-05 22:25:32 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-05 22:25:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p2} INFO {Slewing to source 'drift92p2' ...} 2009-Mar-05 22:25:33 INFO1 track_source: Starting to track drift92p2 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p2" 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: set ra 085500.0 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: set dec +222312 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: pnt tr 085500.0 +222312 -CJ 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:25:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-05 22:25:33 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-05 22:25:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:25:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-05 22:25:33 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Mar-05 22:25:33 START begin_task: Starting task 'applying pointing corrections' 2009-Mar-05 22:25:33 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Mar-05 22:25:33 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-05 22:25:33 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Mar-05 22:25:33 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Mar-05 22:25:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:25:33 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Mar-05 22:25:33 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 STOP finish_task: Finishing task 'selecting new source' 2009-Mar-05 22:25:33 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 DONE finish_task: DONE finished selecting: new source 2009-Mar-05 22:25:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:25:33 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Mar-05 22:25:33 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p2" 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: set ra 085500.0 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: set dec +222312 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% 085500.0 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% +222312 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: pnt tr 085500.0 +222312 -CJ 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Mar-05 22:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:42 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Mar-05 22:25:42 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Mar-05 22:25:42 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:25:42 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-05 22:25:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-05 22:25:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-05 22:25:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-05 22:25:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-05 22:25:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-05 22:25:42 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-05 22:25:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-05 22:25:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:25:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:25:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-05 22:25:45 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-05 22:25:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-05 22:25:45 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:25:45 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-05 22:25:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-05 22:25:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:25:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:25:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:25:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:25:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-05 22:25:45 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-05 22:25:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-05 22:25:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-05 22:25:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-05 22:25:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-05 22:25:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-05 22:25:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-05 22:25:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-05 22:25:46 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-05 22:25:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.002 0.908 ALFA beam 1: 1.047 1.052 2009-Mar-05 22:25:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.022 0.966 ALFA beam 3: 1.065 1.090 2009-Mar-05 22:25:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.076 0.960 ALFA beam 5: 1.006 0.971 2009-Mar-05 22:25:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.916 0.107 ALFA beam 7: 1.018 0.117 2009-Mar-05 22:25:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:25:46 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-05 22:25:46 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Mar-05 22:25:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:25:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:25:46 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-05 22:25:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Mar-05 22:25:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:25:46 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-05 22:25:46 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-05 22:25:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-05 22:25:46 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:25:46 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-05 22:25:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-05 22:25:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.908 1.047 1.052 2009-Mar-05 22:25:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.966 1.065 1.090 2009-Mar-05 22:25:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.960 1.006 0.971 2009-Mar-05 22:25:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.107 1.018 0.117 2009-Mar-05 22:25:50 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Mar-05 22:25:50 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p2 085500.0 +222312 J 0 Topocentric velocity(optical) 2009-Mar-05 22:25:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p2 085500.0 +222312 J 0 Topocentric velocity(optical)' 2009-Mar-05 22:25:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-05 22:25:50 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-05 22:25:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift92p2' 2009-Mar-05 22:25:50 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-05 22:25:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p2} 2009-Mar-05 22:25:50 INFO5 fixed_driftmap: Start: year = 2009.1777812634673 RA = 08:55:34.2 Dec = +22:21:01.3 2009-Mar-05 22:25:50 NOTE fixed_driftmap: Setting ZA to 3:59:47.6 ... 2009-Mar-05 22:25:50 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.00 2009-Mar-05 22:25:50 LOG3 track_source: Calling 'track_source drift92p2 180.0 3.9965664631 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Mar-05 22:25:50 START begin_task: Starting task 'sending tracking commands' 2009-Mar-05 22:25:50 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-05 22:25:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p2} INFO {Slewing to source 'drift92p2' ...} 2009-Mar-05 22:25:50 INFO1 track_source: Starting to track drift92p2 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p2" 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: set dec 3.9965664631 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.9965664631 -CF 2009-Mar-05 22:25:50 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:25:50 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-05 22:25:50 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-05 22:25:50 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-05 22:25:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:25:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-05 22:25:50 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-05 22:25:50 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:25:50 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-05 22:25:51 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-05 22:25:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Mar-05 22:25:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-05 22:25:51 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-05 22:25:51 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p2" 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: set dec 3.9965664631 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: vw% 3.9965664631 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.9965664631 -CF 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-05 22:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:25:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-05 22:25:51 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-05 22:25:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-05 22:25:51 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-05 22:25:51 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-05 22:25:51 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-05 22:25:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:25:51 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-05 22:25:51 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 START begin_task: Starting task 'waiting on telescope' 2009-Mar-05 22:25:51 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-05 22:25:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-05 22:25:52 LOG3 waittrk: Start waittrk 5 2009-Mar-05 22:25:52 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-05 22:25:52 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-05 22:25:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-05 22:25:57 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-05 22:25:57 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-05 22:25:57 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-05 22:26:31 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-05 22:26:31 INFO2 waittrk: Now tracking drift92p2 2009-Mar-05 22:26:31 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 4.02 2009-Mar-05 22:26:31 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-05 22:26:31 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-05 22:26:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:26:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-05 22:26:31 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 START begin_task: Starting task 'selecting calibration type' 2009-Mar-05 22:26:31 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-05 22:26:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-05 22:26:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:26:31 START begin_task: Starting task 'waiting on setcal' 2009-Mar-05 22:26:31 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-05 22:26:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:26:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:26:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-05 22:26:31 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-05 22:26:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:26:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-05 22:26:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:26:31 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-05 22:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:26:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:26:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:26:32 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:26:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-05 22:26:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:26:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:26:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:26:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:26:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:26:32 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:26:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:26:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-05 22:26:32 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG5 dopset_later: Calling 'dopset_later 12.583419284691617' 2009-Mar-05 22:26:32 INFO3 dopset_later: Setting Doppler correction for 22:26:45 (12.6 seconds from now) 2009-Mar-05 22:26:32 LOG5 antvel: Calling 'antvel 180.000000 3.996566 F Topocentric 12.583419284691617' 2009-Mar-05 22:26:32 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.00 to apparent RA = 08:55:34.1 Dec = +22:21:01.3 2009-Mar-05 22:26:32 LOG2 antvel: Parameters to Doppler: Topocentric 95205 2009 64 0.0 2009-Mar-05 22:26:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-05 22:26:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-05 22:26:32 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-05 22:26:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-05 22:26:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-05 22:26:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:26:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:26:32 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:26:32 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-05 22:26:32 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-05 22:26:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-05 22:26:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-05 22:26:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:26:32 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-05 22:26:32 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-05 22:26:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-05 22:26:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-05 22:26:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-05 22:26:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:26:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-05 22:26:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:26:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:26:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-05 22:26:35 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-05 22:26:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-05 22:26:35 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-05 22:26:35 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-05 22:26:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-05 22:26:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:26:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:26:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:26:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-05 22:26:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-05 22:26:36 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-05 22:26:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:26:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-05 22:26:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-05 22:26:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-05 22:26:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-05 22:26:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-05 22:26:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-05 22:26:36 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.013 0.914 ALFA beam 1: 1.052 1.057 2009-Mar-05 22:26:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.024 0.967 ALFA beam 3: 1.093 1.115 2009-Mar-05 22:26:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.097 0.983 ALFA beam 5: 1.018 0.960 2009-Mar-05 22:26:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.935 0.110 ALFA beam 7: 1.032 0.120 2009-Mar-05 22:26:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:26:36 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-05 22:26:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:26:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:26:36 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-05 22:26:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-05 22:26:36 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-05 22:26:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:26:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-05 22:26:36 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-05 22:26:36 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 08:55:34.2 LST = 08:55:25.6 diff = 8.6 secs 2009-Mar-05 22:26:36 INFO2 fixed_driftmap: Waiting 6.6 seconds for RA 8:55:34 2009-Mar-05 22:26:36 INFO2 lstwait: Waiting for 6.6 secs from LST 08:55:26 to LST 08:55:32 ... 2009-Mar-05 22:26:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6.589430080853484 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-05 22:26:36 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-05 22:26:36 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-05 22:26:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:26:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.914 1.052 1.057 2009-Mar-05 22:26:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.967 1.093 1.115 2009-Mar-05 22:26:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.983 1.018 0.960 2009-Mar-05 22:26:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.110 1.032 0.120 2009-Mar-05 22:26:43 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-05 22:26:43 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-05 22:26:43 LOG4 lstwait: Finished waiting 0.41 seconds late 2009-Mar-05 22:26:43 INFO3 lstwait: Finished waiting 2009-Mar-05 22:26:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-05 22:26:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:26:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:26:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:26:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:26:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Mar-05 22:26:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-05 22:26:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-05 22:26:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-05 22:26:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-05 22:26:43 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-05 22:26:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-05 22:26:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-05 22:26:43 INFO2 take_data: Starting WAPP 600-second scan: 906400201 2009-Mar-05 22:26:44 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-05 22:26:44 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-05 22:26:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:26:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20090305.a2010.0032.fits 2009-Mar-05 22:26:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:26:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090305.a2010.0032.fits} 2009-Mar-05 22:26:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-05 22:26:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8805.00 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:26:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:26:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:26:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:26:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:26:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:26:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:26:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:27:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-Mar-05 22:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:27:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:27:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:27:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.913 1.055 1.060 2009-Mar-05 22:27:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.967 1.090 1.115 2009-Mar-05 22:27:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.989 1.018 0.967 2009-Mar-05 22:27:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.110 1.034 0.120 2009-Mar-05 22:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:27:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:27:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:27:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:28:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:28:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-Mar-05 22:28:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:28:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:28:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.912 1.049 1.055 2009-Mar-05 22:28:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.967 1.091 1.116 2009-Mar-05 22:28:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.980 1.015 0.986 2009-Mar-05 22:28:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.109 1.034 0.119 2009-Mar-05 22:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:29:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:29:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:29:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:29:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:29:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:29:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:29:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.909 1.047 1.054 2009-Mar-05 22:29:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.965 1.087 1.117 2009-Mar-05 22:29:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.982 1.019 0.986 2009-Mar-05 22:29:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.110 1.027 0.120 2009-Mar-05 22:29:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-Mar-05 22:29:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:29:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:29:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:30:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:30:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:30:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:30:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-05 22:30:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:30:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.907 1.048 1.053 2009-Mar-05 22:30:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.962 1.085 1.114 2009-Mar-05 22:30:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.981 1.013 1.000 2009-Mar-05 22:30:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.110 1.027 0.119 2009-Mar-05 22:30:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:30:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:30:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:30:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:30:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:31:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:31:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.908 1.043 1.052 2009-Mar-05 22:31:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.964 1.087 1.115 2009-Mar-05 22:31:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.984 1.015 0.996 2009-Mar-05 22:31:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.110 1.026 0.119 2009-Mar-05 22:31:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-Mar-05 22:31:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:31:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-05 22:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-05 22:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:32:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:32:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:32:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-05 22:32:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:32:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:32:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:32:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:32:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:32:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.908 1.048 1.051 2009-Mar-05 22:32:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.963 1.087 1.109 2009-Mar-05 22:32:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.984 1.015 0.996 2009-Mar-05 22:32:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.109 1.027 0.119 2009-Mar-05 22:32:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:32:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:32:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:33:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:33:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:33:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:33:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:33:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:33:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:33:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:33:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:33:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:33:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.907 1.046 1.050 2009-Mar-05 22:33:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.963 1.086 1.112 2009-Mar-05 22:33:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.984 1.012 0.998 2009-Mar-05 22:33:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.109 1.025 0.119 2009-Mar-05 22:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:33:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:33:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:34:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-05 22:34:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:34:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.907 1.045 1.053 2009-Mar-05 22:34:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.965 1.086 1.111 2009-Mar-05 22:34:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.984 1.014 0.998 2009-Mar-05 22:34:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.109 1.026 0.119 2009-Mar-05 22:34:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:34:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:34:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:35:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:35:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:35:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:35:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:35:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:35:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.910 1.042 1.050 2009-Mar-05 22:35:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 1.004 1.086 1.110 2009-Mar-05 22:35:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.986 1.008 0.985 2009-Mar-05 22:35:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.109 1.025 0.119 2009-Mar-05 22:35:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:35:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:35:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:35:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:36:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Mar-05 22:36:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.145 (still bad) 2009-Mar-05 22:36:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-Mar-05 22:36:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Mar-05 22:36:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:36:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:36:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:36:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:36:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:36:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-05 22:36:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-05 22:36:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:36:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.150 (still bad) 2009-Mar-05 22:36:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.201 (still bad) 2009-Mar-05 22:36:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:36:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-05 22:36:45 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-05 22:36:45 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG1 fixed_driftmap: New position: year = 2009.1778020191648 RA = 09:05:03.1 RA/Dec = 09:05:37.1 +22:20:55.0 2009-Mar-05 22:36:45 NOTE fixed_driftmap: Correcting ZA to 3:59:41.3 ... 2009-Mar-05 22:36:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9948056040 -CF 2009-Mar-05 22:36:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Mar-05 22:36:45 START begin_task: Starting task 'WAPP calibration' 2009-Mar-05 22:36:45 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-05 22:36:45 START begin_task: Starting task 'selecting calibration type' 2009-Mar-05 22:36:45 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-05 22:36:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-05 22:36:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:36:45 START begin_task: Starting task 'waiting on setcal' 2009-Mar-05 22:36:45 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9948056040 -CF 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-05 22:36:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-05 22:36:45 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-05 22:36:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:36:45 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-05 22:36:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:36:45 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-05 22:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-05 22:36:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:36:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:36:45 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:36:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-05 22:36:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-05 22:36:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:36:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-05 22:36:46 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-05 22:36:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-05 22:36:46 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-05 22:36:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-05 22:36:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-05 22:36:46 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-05 22:36:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-05 22:36:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-05 22:36:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:36:46 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:36:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-05 22:36:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:36:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:36:46 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Mar-05 22:36:46 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-05 22:36:46 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Mar-05 22:36:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-05 22:36:46 INFO2 take_data: Starting WAPP 1-second scan: 906400202 2009-Mar-05 22:36:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-05 22:36:46 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-05 22:36:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:36:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-05 22:36:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9407.00 2009-Mar-05 22:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.225 (still bad) 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:36:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-05 22:36:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-05 22:36:48 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-05 22:36:48 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-05 22:36:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-05 22:36:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-05 22:36:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-05 22:36:48 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-05 22:36:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-05 22:36:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-05 22:36:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-05 22:36:48 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-05 22:36:48 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-05 22:36:48 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-05 22:36:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-05 22:36:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-05 22:36:48 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-05 22:36:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Mar-05 22:36:48 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-05 22:36:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:36:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:36:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:36:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Drew Brisbin 2009-Mar-05 22:36:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-05 22:36:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-05 22:36:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-05 22:36:49 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Mar-05 22:36:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-05 22:36:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-05 22:36:49 INFO2 take_data: Starting WAPP 600-second scan: 906400203 2009-Mar-05 22:36:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-05 22:36:49 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-05 22:36:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Drew Brisbin' 2009-Mar-05 22:36:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-05 22:36:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.400 1.246 1.441 1.444 2009-Mar-05 22:36:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.424 1.343 1.520 1.532 2009-Mar-05 22:36:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.553 1.395 1.463 1.345 2009-Mar-05 22:36:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.549 0.110 1.708 0.120 2009-Mar-05 22:36:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-05 22:36:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-05 22:36:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9410.00 2009-Mar-05 22:36:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20090305.a2010.0033.fits 2009-Mar-05 22:36:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090305.a2010.0033.fits} 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.774773 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.629071 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.672795 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2009-Mar-05 22:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.708 (still bad) 2009-Mar-05 22:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2009-Mar-05 22:36:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.249 (still bad) 2009-Mar-05 22:36:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.207 (still bad) 2009-Mar-05 22:36:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.153 (still bad) 2009-Mar-05 22:36:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:36:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:36:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:37:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:37:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:37:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:37:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:37:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:37:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-05 22:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-05 22:37:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:37:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-05 22:37:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-05 22:37:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-05 22:37:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:37:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:37:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.905 1.048 1.047 2009-Mar-05 22:37:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.966 1.091 1.114 2009-Mar-05 22:37:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.991 1.014 0.969 2009-Mar-05 22:37:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.109 1.024 0.119 2009-Mar-05 22:37:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:37:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:37:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:37:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:38:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:38:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:38:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:38:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.904 1.046 1.048 2009-Mar-05 22:38:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.965 1.085 1.111 2009-Mar-05 22:38:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.990 1.011 0.999 2009-Mar-05 22:38:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.109 1.024 0.119 2009-Mar-05 22:38:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:38:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:39:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-05 22:39:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:39:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.905 1.047 1.050 2009-Mar-05 22:39:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.964 1.088 1.111 2009-Mar-05 22:39:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.990 1.010 0.994 2009-Mar-05 22:39:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.109 1.022 0.119 2009-Mar-05 22:39:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:39:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:39:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:39:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:40:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:40:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:40:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-05 22:40:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-05 22:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:40:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:40:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:40:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:40:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:40:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:40:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:40:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:40:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-05 22:40:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.904 1.042 1.047 2009-Mar-05 22:40:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.964 1.085 1.108 2009-Mar-05 22:40:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.986 1.008 0.984 2009-Mar-05 22:40:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.109 1.021 0.119 2009-Mar-05 22:40:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:40:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:40:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:41:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:41:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-05 22:41:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:41:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:41:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-05 22:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-05 22:41:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-05 22:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-05 22:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-05 22:41:54 LOG3 WAPP=4-chip_count: Counts don't