2009-Mar-03 22:47:50 BEGIN executive: CIMA executive starting ... 2009-Mar-03 22:47:50 NOTE executive: STARTING NEW CIMA SESSION 2009-Mar-03 22:47:50 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Mar-03 22:47:50 INFO4 executive: This is an ON-LINE session 2009-Mar-03 22:47:50 INFO4 executive: This is a LOCAL session 2009-Mar-03 22:47:50 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Mar-03 22:47:50 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Shan' 2009-Mar-03 22:47:50 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090303' 2009-Mar-03 22:47:50 LOG2 log_preferences: Currently applied preferences: 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(dailylog) = daily 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(datawindow) = open 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(logcolours) = full 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(displayformat) = long 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(logformat) = new 2009-Mar-03 22:47:50 LOG2 log_preferences: prefs(fontsize) = 3 2009-Mar-03 22:47:50 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-03 22:47:50 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-03 22:47:50 ALERT executive: CIMA executive ready 2009-Mar-03 22:47:52 NOTE frontend: CIMA frontend ready 2009-Mar-03 22:47:55 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Mar-03 22:47:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:47:55 LOG4 got_cormsg: From DATATAKING: setup 2009-Mar-03 22:47:55 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Mar-03 22:47:55 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Mar-03 22:47:55 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-03 22:47:55 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-03 22:47:55 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-03 22:47:55 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-03 22:47:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-03 22:47:55 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-03 22:47:55 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-03 22:47:55 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-03 22:47:55 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-03 22:47:55 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-03 22:47:55 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Mar-03 22:47:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:47:56 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-03 22:47:56 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-03 22:48:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-03 22:48:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-03 22:48:01 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-03 22:48:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-03 22:48:01 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-03 22:48:01 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-03 22:48:01 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-03 22:48:02 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-03 22:48:02 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-03 22:48:02 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Mar-03 22:48:02 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Mar-03 22:48:02 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:05 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-03 22:48:05 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-03 22:48:05 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-03 22:48:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-03 22:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:40 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Mar-03 22:48:44 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Mar-03 22:48:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Mar-03 22:48:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Mar-03 22:48:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Mar-03 22:48:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Mar-03 22:48:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Mar-03 22:48:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Mar-03 22:48:45 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Mar-03 22:48:45 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-03 22:48:45 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-03 22:48:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Mar-03 22:48:45 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Mar-03 22:48:45 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Mar-03 22:48:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-03 22:48:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-03 22:48:45 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-03 22:48:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-03 22:48:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-03 22:48:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-03 22:48:47 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-03 22:48:47 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-03 22:48:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-03 22:48:47 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-03 22:48:47 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-03 22:48:47 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Mar-03 22:48:47 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-03 22:48:47 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-03 22:48:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-03 22:48:47 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-03 22:48:47 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-03 22:48:47 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-03 22:48:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:48:47 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-03 22:48:47 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-03 22:48:47 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-03 22:48:47 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-03 22:48:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-03 22:48:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:48:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:48:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:48:47 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:48:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:48:47 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-03 22:48:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:48:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-03 22:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-03 22:48:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-03 22:48:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-03 22:48:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-03 22:48:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-03 22:48:48 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-03 22:48:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-03 22:48:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:48:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-03 22:48:48 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-03 22:48:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:48:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:49:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-03 22:49:03 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-03 22:49:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-03 22:49:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-03 22:49:03 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-03 22:49:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-03 22:49:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:49:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-03 22:49:03 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-03 22:49:04 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-03 22:49:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-03 22:49:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-03 22:49:04 START begin_task: Starting task 'selecting calibration port' 2009-Mar-03 22:49:04 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-03 22:49:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-03 22:49:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:04 START begin_task: Starting task 'waiting on calport' 2009-Mar-03 22:49:04 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:49:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-03 22:49:04 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-03 22:49:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-03 22:49:04 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 22:49:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 22:49:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:49:04 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:49:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:49:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:49:04 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-03 22:49:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-03 22:49:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:49:04 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:49:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:49:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:49:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:49:04 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 22:49:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 22:49:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 22:49:05 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-03 22:49:05 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-03 22:49:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:49:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-03 22:49:05 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Mar-03 22:49:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Mar-03 22:49:05 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Mar-03 22:49:05 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Mar-03 22:49:05 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Mar-03 22:49:05 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Mar-03 22:49:05 LOG3 track_source: Calling 'track_source galfasrc 091100.0 +225224 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-03 22:49:05 START begin_task: Starting task 'sending tracking commands' 2009-Mar-03 22:49:05 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-03 22:49:05 INFO1 track_source: Starting to track galfasrc 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: set ra 091100.0 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: set dec +225224 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: pnt tr 091100.0 +225224 -CJ 2009-Mar-03 22:49:05 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-03 22:49:05 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-03 22:49:05 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-03 22:49:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:49:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-03 22:49:05 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Mar-03 22:49:05 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-03 22:49:05 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Mar-03 22:49:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:49:06 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Mar-03 22:49:06 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-03 22:49:06 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Mar-03 22:49:06 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Mar-03 22:49:06 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:49:06 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-03 22:49:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-03 22:49:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-03 22:49:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-03 22:49:06 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-03 22:49:06 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-03 22:49:06 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-03 22:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 22:49:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090303.a2010.0033.fits 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-03 22:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-03 22:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-03 22:49:06 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090303.a2010.0033.fits} 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: set ra 091100.0 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: set dec +225224 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: vw% 091100.0 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: vw% +225224 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: pnt tr 091100.0 +225224 -CJ 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-03 22:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 22:49:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-03 22:49:38 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-03 22:49:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-03 22:49:38 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-03 22:49:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:49:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:49:38 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-03 22:49:38 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-03 22:49:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:49:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-03 22:49:38 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-03 22:49:38 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Mar-03 22:49:38 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Mar-03 22:49:38 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-03 22:49:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-03 22:49:38 LOG3 waittrk: Start waittrk 5 2009-Mar-03 22:49:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-03 22:49:38 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-03 22:49:43 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-03 22:49:43 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-03 22:49:43 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:49:43 INFO2 waittrk: Now tracking galfasrc 2009-Mar-03 22:49:43 LOG4 waittrk: Current telescope position: Az = 182.18 ZA = 4.51 2009-Mar-03 22:49:43 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-03 22:49:43 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 DONE finish_task: DONE finished waiting: telescope on source 2009-Mar-03 22:49:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:49:43 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-03 22:49:43 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-03 22:49:43 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-03 22:49:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Mar-03 22:49:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-03 22:49:44 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-03 22:49:44 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Mar-03 22:49:44 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-03 22:49:44 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Mar-03 22:49:44 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Mar-03 22:49:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Mar-03 22:49:44 START begin_task: Starting task 'selecting calibration type' 2009-Mar-03 22:49:44 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-03 22:49:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-03 22:49:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-03 22:49:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:44 START begin_task: Starting task 'waiting on setcal' 2009-Mar-03 22:49:44 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-03 22:49:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-03 22:49:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:49:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-03 22:49:44 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-03 22:49:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-03 22:49:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:49:44 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-03 22:49:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:49:44 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-03 22:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:49:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:49:45 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-03 22:49:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:49:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-03 22:49:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:49:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:49:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:49:45 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-03 22:49:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:49:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:49:45 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-03 22:49:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:49:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:49:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-03 22:49:45 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-03 22:49:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 22:49:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 22:49:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 22:49:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 22:49:45 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090303.a2010.0033.fits' is empty! 2009-Mar-03 22:49:45 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Mar-03 22:49:46 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-03 22:49:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-03 22:49:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 22:49:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 22:49:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:49:46 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-03 22:49:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:49:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:49:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:49:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:49:46 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-03 22:49:46 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-03 22:49:46 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:49:46 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-03 22:49:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-03 22:49:46 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-03 22:49:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-03 22:49:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-03 22:49:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:46 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-03 22:49:46 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-03 22:49:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-03 22:49:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 22:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:49 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:49:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-03 22:49:49 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-03 22:49:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-03 22:49:49 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:49:49 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-03 22:49:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-03 22:49:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:49:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:49:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:49:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:49:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-03 22:49:49 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-03 22:49:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-03 22:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:49 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-03 22:49:49 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-03 22:49:49 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-03 22:49:49 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-03 22:49:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-03 22:49:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-03 22:49:50 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.003 0.903 ALFA beam 1: 1.042 1.027 2009-Mar-03 22:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.011 0.955 ALFA beam 3: 1.062 1.072 2009-Mar-03 22:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.075 0.960 ALFA beam 5: 1.001 1.047 2009-Mar-03 22:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.942 0.104 ALFA beam 7: 1.047 0.113 2009-Mar-03 22:49:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:49:50 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:49:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:49:50 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-03 22:49:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:49:50 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:49:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:49:50 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:49:50 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-03 22:49:50 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:49:50 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:49:50 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:49:50 LOG2 antvel: Parameters to Doppler: Topocentric 96589 2009 62 0.0 2009-Mar-03 22:49:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:49:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-03 22:49:50 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-03 22:49:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:49:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:49:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:49:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:49:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-03 22:49:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:49:50 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:49:50 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.180349 2009.1723511610517 18.999933 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333069 22.873333333333328 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 1 9.184285478771951 22.768035552652485 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 2 9.189437479411168 22.834623830886031 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 3 9.188586358418252 22.940132215650451 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 4 9.182320716644444 22.978592015966750 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 5 9.177124751292608 22.910377737515319 2009-Mar-03 22:49:50 LOG4 log_alfabeam: ALFABEAM 6 9.178237968840634 22.805359522688107 2009-Mar-03 22:49:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200156 2009-Mar-03 22:49:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:49:50 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-03 22:49:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:49:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:49:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:49:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:49:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10191.00 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:49:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-03 22:49:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.927 1.075 1.046 2009-Mar-03 22:49:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.982 1.136 1.115 2009-Mar-03 22:49:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.133 1.000 1.062 1.106 2009-Mar-03 22:49:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.104 1.047 0.113 2009-Mar-03 22:49:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Mar-03 22:49:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Mar-03 22:49:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Mar-03 22:49:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Mar-03 22:50:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:50:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:50:01 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-03 22:50:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:50:01 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-03 22:50:01 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-03 22:50:01 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:50:01 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-03 22:50:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:50:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:50:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:50:01 LOG2 antvel: Parameters to Doppler: Topocentric 96601 2009 62 0.0 2009-Mar-03 22:50:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:50:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-03 22:50:01 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-03 22:50:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:50:01 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:50:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:50:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-03 22:50:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:50:01 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-03 22:50:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:50:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.183691 2009.1723515413087 18.999933 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333159 22.873333333333328 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 1 9.184366240517210 22.768181179888355 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 2 9.189466866154163 22.835521385033232 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 3 9.188534763731317 22.940899015342282 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 4 9.182239844678955 22.978437493683806 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 5 9.177096641642466 22.909464414720969 2009-Mar-03 22:50:01 LOG4 log_alfabeam: ALFABEAM 6 9.178290484891781 22.804615549719188 2009-Mar-03 22:50:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200157 2009-Mar-03 22:50:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:50:02 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-03 22:50:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:50:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:50:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:50:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10203.00 2009-Mar-03 22:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Mar-03 22:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Mar-03 22:50:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Mar-03 22:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Mar-03 22:50:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Mar-03 22:50:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:50:13 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-03 22:50:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:50:13 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-03 22:50:13 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-03 22:50:13 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:50:13 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-03 22:50:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:50:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:50:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:50:13 LOG2 antvel: Parameters to Doppler: Topocentric 96613 2009 62 0.0 2009-Mar-03 22:50:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:50:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-03 22:50:13 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-03 22:50:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:50:13 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:50:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:50:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-03 22:50:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:50:13 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-03 22:50:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:50:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.187034 2009.1723519215657 18.999933 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333069 22.873333333333338 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 1 9.184446957387815 22.768338788149673 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 2 9.189495591979297 22.836424049852692 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 3 9.188482529448089 22.941658904824514 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 4 9.182159031387330 22.978270970390014 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 5 9.177069218431999 22.908546332126928 2009-Mar-03 22:50:13 LOG4 log_alfabeam: ALFABEAM 6 9.178343605275112 22.803878767782162 2009-Mar-03 22:50:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200158 2009-Mar-03 22:50:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:50:14 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-03 22:50:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:50:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:50:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:50:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10215.00 2009-Mar-03 22:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:50:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Mar-03 22:50:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Mar-03 22:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Mar-03 22:50:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Mar-03 22:50:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:50:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:50:25 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-03 22:50:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:50:25 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-03 22:50:25 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-03 22:50:25 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:50:25 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-03 22:50:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:50:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:50:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:50:25 LOG2 antvel: Parameters to Doppler: Topocentric 96625 2009 62 0.0 2009-Mar-03 22:50:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:50:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-03 22:50:25 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-03 22:50:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:50:25 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:50:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:50:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-03 22:50:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:50:25 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-03 22:50:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:50:25 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.190376 2009.1723523018227 18.999933 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 0 9.183333333331952 22.873333333333321 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 1 9.184527554471957 22.768508248431097 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 2 9.189523629163370 22.837330997372906 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 3 9.188429703026364 22.942411166414395 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 4 9.182078351818642 22.978092586276290 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 5 9.177042507776916 22.907624337560346 2009-Mar-03 22:50:25 LOG4 log_alfabeam: ALFABEAM 6 9.178397281424122 22.803149865872619 2009-Mar-03 22:50:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200159 2009-Mar-03 22:50:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:50:26 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-03 22:50:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:50:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Mar-03 22:50:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:50:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10227.00 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:50:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Mar-03 22:50:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 22:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 22:50:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 22:50:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 22:50:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:50:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:50:37 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-03 22:50:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:50:37 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-03 22:50:37 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-03 22:50:37 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:50:37 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-03 22:50:37 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:50:37 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:50:37 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:50:37 LOG2 antvel: Parameters to Doppler: Topocentric 96637 2009 62 0.0 2009-Mar-03 22:50:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:50:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-03 22:50:37 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-03 22:50:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:50:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:50:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:50:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-03 22:50:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:50:37 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-03 22:50:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:50:37 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.193719 2009.1723526820799 18.999933 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 0 9.183333333334000 22.873333333333338 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 1 9.184608053445773 22.768689615765304 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 2 9.189550984597211 22.838242477498522 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 3 9.188376269688838 22.943155994035308 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 4 9.181997784327629 22.977902286846863 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 5 9.177016502728064 22.906698182280302 2009-Mar-03 22:50:37 LOG4 log_alfabeam: ALFABEAM 6 9.178451527991566 22.802428648816257 2009-Mar-03 22:50:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200160 2009-Mar-03 22:50:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:50:38 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-03 22:50:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:50:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:50:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 22:50:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:50:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10239.00 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:50:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.093 (still bad) 2009-Mar-03 22:50:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Mar-03 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2009-Mar-03 22:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.092 (still bad) 2009-Mar-03 22:50:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:50:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:50:49 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-03 22:50:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:50:49 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-03 22:50:49 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-03 22:50:49 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:50:49 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-03 22:50:49 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:50:49 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:50:49 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:50:49 LOG2 antvel: Parameters to Doppler: Topocentric 96649 2009 62 0.0 2009-Mar-03 22:50:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:50:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-03 22:50:49 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-03 22:50:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:50:49 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:50:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:50:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-03 22:50:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:50:49 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-03 22:50:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:50:49 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.197061 2009.1723530623369 18.999933 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333209 22.873333333333335 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 1 9.184688379681395 22.768882723699772 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 2 9.189577632688419 22.839157647866642 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 3 9.188322278822177 22.943892693264882 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 4 9.181917403601977 22.977700249782785 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 5 9.176991227172433 22.905768727103652 2009-Mar-03 22:50:49 LOG4 log_alfabeam: ALFABEAM 6 9.178506294589120 22.801715781358926 2009-Mar-03 22:50:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200161 2009-Mar-03 22:50:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:50:50 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-03 22:50:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:50:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:50:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:50:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:50:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10251.00 2009-Mar-03 22:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.091 (still bad) 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:50:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.900 1.035 1.024 2009-Mar-03 22:50:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.955 1.074 1.092 2009-Mar-03 22:50:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.977 0.988 1.061 2009-Mar-03 22:50:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.107 1.058 0.116 2009-Mar-03 22:50:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.091 (still bad) 2009-Mar-03 22:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.089 (still bad) 2009-Mar-03 22:50:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.091 (still bad) 2009-Mar-03 22:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2009-Mar-03 22:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:51:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:51:01 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-03 22:51:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:51:01 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-03 22:51:01 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-03 22:51:01 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:51:01 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-03 22:51:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:51:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:51:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:51:01 LOG2 antvel: Parameters to Doppler: Topocentric 96661 2009 62 0.0 2009-Mar-03 22:51:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:51:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-03 22:51:01 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-03 22:51:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:51:01 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:51:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:51:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-03 22:51:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:51:01 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-03 22:51:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:51:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.200404 2009.1723534425939 18.999933 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333593 22.873333333333338 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 1 9.184768554957193 22.769087618331728 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 2 9.189603580847642 22.840076755139666 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 3 9.188267716066020 22.944621463814080 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 4 9.181837187880522 22.977486429527861 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 5 9.176966673610545 22.904835725986285 2009-Mar-03 22:51:01 LOG4 log_alfabeam: ALFABEAM 6 9.178561595525576 22.801011062200146 2009-Mar-03 22:51:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200162 2009-Mar-03 22:51:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:51:02 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-03 22:51:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:51:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:51:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:51:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10263.00 2009-Mar-03 22:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.090 (still bad) 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:51:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.088 (still bad) 2009-Mar-03 22:51:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.087 (still bad) 2009-Mar-03 22:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:51:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.087 (still bad) 2009-Mar-03 22:51:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.087 (still bad) 2009-Mar-03 22:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.086 (still bad) 2009-Mar-03 22:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:51:13 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-03 22:51:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:51:13 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-03 22:51:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-03 22:51:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-03 22:51:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-03 22:51:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:51:13 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-03 22:51:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:51:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-03 22:51:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:51:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:51:13 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-03 22:51:13 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-03 22:51:13 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:51:13 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-03 22:51:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:51:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:51:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:51:13 LOG2 antvel: Parameters to Doppler: Topocentric 96673 2009 62 0.0 2009-Mar-03 22:51:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:51:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-03 22:51:13 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-03 22:51:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:51:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:51:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:51:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-03 22:51:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:51:13 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-03 22:51:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:51:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.203746 2009.1723538228509 18.999933 2009-Mar-03 22:51:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333515 22.873333333333335 2009-Mar-03 22:51:13 LOG4 log_alfabeam: ALFABEAM 1 9.184848505198882 22.769304096272780 2009-Mar-03 22:51:13 LOG4 log_alfabeam: ALFABEAM 2 9.189628805697152 22.840998945211059 2009-Mar-03 22:51:13 LOG4 log_alfabeam: ALFABEAM 3 9.188212632601489 22.945341636766130 2009-Mar-03 22:51:14 LOG4 log_alfabeam: ALFABEAM 4 9.181757211263145 22.977261040676691 2009-Mar-03 22:51:14 LOG4 log_alfabeam: ALFABEAM 5 9.176942863630133 22.903900049979171 2009-Mar-03 22:51:14 LOG4 log_alfabeam: ALFABEAM 6 9.178617378772927 22.800315129764396 2009-Mar-03 22:51:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200163 2009-Mar-03 22:51:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:51:14 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-03 22:51:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:51:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:51:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:51:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10275.00 2009-Mar-03 22:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.086 (still bad) 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Mar-03 22:51:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.594 (still bad) 2009-Mar-03 22:51:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Mar-03 22:51:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Mar-03 22:51:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:51:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:51:25 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-03 22:51:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:51:25 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-03 22:51:25 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-03 22:51:25 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:51:25 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-03 22:51:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:51:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:51:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:51:25 LOG2 antvel: Parameters to Doppler: Topocentric 96685 2009 62 0.0 2009-Mar-03 22:51:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:51:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-03 22:51:25 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-03 22:51:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:51:25 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:51:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:51:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-03 22:51:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:51:25 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-03 22:51:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:51:25 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.207088 2009.1723542031079 18.999933 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333328 22.873333333333335 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 1 9.184928228557084 22.769532125066839 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 2 9.189653307973076 22.841924185484640 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 3 9.188157031177701 22.946053207002002 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 4 9.181677475577864 22.977024118850842 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 5 9.176919795943348 22.902961735544867 2009-Mar-03 22:51:25 LOG4 log_alfabeam: ALFABEAM 6 9.178673641412697 22.799627980012140 2009-Mar-03 22:51:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200164 2009-Mar-03 22:51:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:51:26 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-03 22:51:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:51:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Mar-03 22:51:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:51:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10287.00 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:51:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Mar-03 22:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Mar-03 22:51:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.585 (still bad) 2009-Mar-03 22:51:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.583 (still bad) 2009-Mar-03 22:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.584 (still bad) 2009-Mar-03 22:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:51:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:51:37 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-03 22:51:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:51:37 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-03 22:51:37 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-03 22:51:37 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:51:37 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-03 22:51:37 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:51:37 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:51:37 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:51:37 LOG2 antvel: Parameters to Doppler: Topocentric 96697 2009 62 0.0 2009-Mar-03 22:51:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:51:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-03 22:51:37 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-03 22:51:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:51:37 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:51:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:51:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-03 22:51:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:51:37 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-03 22:51:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:51:37 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.210431 2009.1723545833652 18.999933 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333435 22.873333333333342 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 1 9.185007723188246 22.769771675053629 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 2 9.189677088257781 22.842852444686883 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 3 9.188100914401538 22.946756167967848 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 4 9.181597982643190 22.976775696855942 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 5 9.176897469411795 22.902020817751456 2009-Mar-03 22:51:37 LOG4 log_alfabeam: ALFABEAM 6 9.178730380684982 22.798949610367501 2009-Mar-03 22:51:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200165 2009-Mar-03 22:51:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:51:38 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-03 22:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:51:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:51:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Mar-03 22:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10299.00 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Mar-03 22:51:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.577 (still bad) 2009-Mar-03 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.579 (still bad) 2009-Mar-03 22:51:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.577 (still bad) 2009-Mar-03 22:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.580 (still bad) 2009-Mar-03 22:51:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:51:49 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-03 22:51:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:51:49 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-03 22:51:49 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-03 22:51:49 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:51:49 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-03 22:51:49 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:51:49 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17235 J 2009-Mar-03 22:51:49 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:51:49 LOG2 antvel: Parameters to Doppler: Topocentric 96709 2009 62 0.0 2009-Mar-03 22:51:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:51:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-03 22:51:49 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-03 22:51:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:51:49 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:51:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:51:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-03 22:51:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:51:49 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-03 22:51:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:51:49 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.213773 2009.1723549636222 18.999933 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333417 22.873333333333335 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 1 9.185086916263998 22.770022489062203 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 2 9.189700126624876 22.843782856258319 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 3 9.188044335748284 22.947449892740522 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 4 9.181518805240970 22.976516042914007 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 5 9.176875902076594 22.901078177672872 2009-Mar-03 22:51:49 LOG4 log_alfabeam: ALFABEAM 6 9.178787542459860 22.798280616379561 2009-Mar-03 22:51:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200166 2009-Mar-03 22:51:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:51:50 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-03 22:51:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:51:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:51:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:51:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:51:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10311.00 2009-Mar-03 22:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.577 (still bad) 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:51:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.558 (still bad) 2009-Mar-03 22:51:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-03 22:51:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.425 1.255 1.453 1.425 2009-Mar-03 22:51:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.430 1.346 1.544 1.532 2009-Mar-03 22:51:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.566 1.397 1.444 1.446 2009-Mar-03 22:51:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.372 0.108 1.513 0.117 2009-Mar-03 22:51:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Mar-03 22:51:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Mar-03 22:51:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Mar-03 22:52:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:52:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:52:01 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-03 22:52:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:52:01 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-03 22:52:01 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-03 22:52:01 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:52:01 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-03 22:52:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:52:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:52:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:52:01 LOG2 antvel: Parameters to Doppler: Topocentric 96721 2009 62 0.0 2009-Mar-03 22:52:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:52:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-03 22:52:01 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-03 22:52:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:52:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:52:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:52:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-03 22:52:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:52:01 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-03 22:52:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:52:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.217116 2009.1723553438792 18.999933 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333376 22.873333333333338 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 1 9.185165830255436 22.770284592715580 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 2 9.189722431890811 22.844715664364355 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 3 9.187987281668038 22.948134599503291 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 4 9.181439920845397 22.976245131791202 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 5 9.176855084968315 22.900133570179147 2009-Mar-03 22:52:01 LOG4 log_alfabeam: ALFABEAM 6 9.178845140406919 22.797620777883708 2009-Mar-03 22:52:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200167 2009-Mar-03 22:52:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:52:02 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-03 22:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:52:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:52:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:52:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10323.00 2009-Mar-03 22:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:52:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.530 (still bad) 2009-Mar-03 22:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.537 (still bad) 2009-Mar-03 22:52:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.529 (still bad) 2009-Mar-03 22:52:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.530 (still bad) 2009-Mar-03 22:52:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:52:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:52:13 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-03 22:52:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:52:13 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-03 22:52:13 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-03 22:52:13 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:52:13 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-03 22:52:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:52:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:52:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:52:13 LOG2 antvel: Parameters to Doppler: Topocentric 96733 2009 62 0.0 2009-Mar-03 22:52:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:52:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-03 22:52:13 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-03 22:52:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:52:13 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:52:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:52:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-03 22:52:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:52:13 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-03 22:52:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:52:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.220458 2009.1723557241362 18.999933 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333339 22.873333333333338 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 1 9.185244393437182 22.770557694482473 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 2 9.189743986475017 22.845649997652590 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 3 9.187929806956836 22.948809691464835 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 4 9.181361401082999 22.975963265887689 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 5 9.176835033728072 22.899187879432624 2009-Mar-03 22:52:13 LOG4 log_alfabeam: ALFABEAM 6 9.178903119227924 22.796970659943813 2009-Mar-03 22:52:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200168 2009-Mar-03 22:52:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:52:14 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-03 22:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.529 (still bad) 2009-Mar-03 22:52:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:52:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:52:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:52:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10335.00 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.524 (still bad) 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:52:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.532 (still bad) 2009-Mar-03 22:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.526 (still bad) 2009-Mar-03 22:52:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.523 (still bad) 2009-Mar-03 22:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.526 (still bad) 2009-Mar-03 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:52:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:52:25 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-03 22:52:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:52:25 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-03 22:52:25 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-03 22:52:25 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:52:25 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-03 22:52:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:52:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:52:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:52:25 LOG2 antvel: Parameters to Doppler: Topocentric 96745 2009 62 0.0 2009-Mar-03 22:52:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:52:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-03 22:52:25 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-03 22:52:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:52:25 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:52:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:52:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-03 22:52:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:52:25 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-03 22:52:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:52:25 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.223801 2009.1723561043932 18.999933 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333325 22.873333333333338 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 1 9.185322628735015 22.770841813015156 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 2 9.189764799774332 22.846586101598511 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 3 9.187871898216372 22.949475395380031 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 4 9.181283222954500 22.975670426818667 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 5 9.176815738795748 22.898240858305499 2009-Mar-03 22:52:25 LOG4 log_alfabeam: ALFABEAM 6 9.178961492499360 22.796330033855977 2009-Mar-03 22:52:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200169 2009-Mar-03 22:52:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:52:26 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-03 22:52:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:52:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:52:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.524 (still bad) 2009-Mar-03 22:52:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:52:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10347.00 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.523 (still bad) 2009-Mar-03 22:52:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.528 (still bad) 2009-Mar-03 22:52:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.525 (still bad) 2009-Mar-03 22:52:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.521 (still bad) 2009-Mar-03 22:52:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.521 (still bad) 2009-Mar-03 22:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:52:37 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-03 22:52:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:52:37 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-03 22:52:37 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Mar-03 22:52:37 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-03 22:52:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-03 22:52:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 22:52:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 22:52:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:52:37 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-03 22:52:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:52:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:52:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:52:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:52:37 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-03 22:52:37 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-03 22:52:37 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-03 22:52:37 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:52:37 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-03 22:52:37 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:52:37 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:52:37 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:52:37 LOG2 antvel: Parameters to Doppler: Topocentric 96757 2009 62 0.0 2009-Mar-03 22:52:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:52:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-03 22:52:37 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-03 22:52:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:52:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:52:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:52:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-03 22:52:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:52:37 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-03 22:52:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:52:38 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.227143 2009.1723564846504 18.999933 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333362 22.873333333333328 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 1 9.185400465733933 22.771136623927834 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 2 9.189784856571238 22.847523102871587 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 3 9.187813611368430 22.950131145987008 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 4 9.181205456725248 22.975366949596811 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 5 9.176797213407237 22.897293391187965 2009-Mar-03 22:52:38 LOG4 log_alfabeam: ALFABEAM 6 9.179020203950353 22.795699432989863 2009-Mar-03 22:52:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200170 2009-Mar-03 22:52:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:52:38 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-03 22:52:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:52:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:52:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-03 22:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.519 (still bad) 2009-Mar-03 22:52:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10359.00 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Mar-03 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Mar-03 22:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Mar-03 22:52:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Mar-03 22:52:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Mar-03 22:52:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:52:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:52:49 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-03 22:52:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:52:49 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-03 22:52:49 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-03 22:52:49 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:52:49 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-03 22:52:49 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:52:49 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:52:49 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:52:49 LOG2 antvel: Parameters to Doppler: Topocentric 96769 2009 62 0.0 2009-Mar-03 22:52:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:52:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-03 22:52:49 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-03 22:52:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:52:49 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:52:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:52:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-03 22:52:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:52:49 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-03 22:52:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:52:49 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.230486 2009.1723568649074 18.999933 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333458 22.873333333333346 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 1 9.185477927899557 22.771442139837646 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 2 9.189804166834019 22.848461249559666 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 3 9.187754933068263 22.950777179023305 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 4 9.181128078838844 22.975052821719167 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 5 9.176779447427769 22.896345227641021 2009-Mar-03 22:52:49 LOG4 log_alfabeam: ALFABEAM 6 9.179079267160512 22.795078619798272 2009-Mar-03 22:52:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200171 2009-Mar-03 22:52:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:52:50 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-03 22:52:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:52:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:52:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:52:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-03 22:52:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10371.00 2009-Mar-03 22:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Mar-03 22:52:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad) 2009-Mar-03 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:52:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.920 1.069 1.044 2009-Mar-03 22:52:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.970 1.116 1.110 2009-Mar-03 22:52:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.995 1.041 1.090 2009-Mar-03 22:52:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.107 1.069 0.117 2009-Mar-03 22:52:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Mar-03 22:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Mar-03 22:53:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:53:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:53:01 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-03 22:53:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:53:01 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-03 22:53:01 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-03 22:53:01 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:53:01 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-03 22:53:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:53:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:53:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:53:01 LOG2 antvel: Parameters to Doppler: Topocentric 96781 2009 62 0.0 2009-Mar-03 22:53:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:53:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-03 22:53:01 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-03 22:53:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:53:01 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:53:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:53:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-03 22:53:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:53:01 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-03 22:53:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:53:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.233828 2009.1723572451644 18.999933 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333392 22.873333333333338 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 1 9.185554946319375 22.771758005247214 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 2 9.189822717704812 22.849399669134634 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 3 9.187695920162245 22.951412961874269 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 4 9.181051158008309 22.974728409012567 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 5 9.176762451702610 22.895397249476218 2009-Mar-03 22:53:01 LOG4 log_alfabeam: ALFABEAM 6 9.179138625085622 22.794468095025394 2009-Mar-03 22:53:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200172 2009-Mar-03 22:53:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:53:02 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-03 22:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:53:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:53:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-03 22:53:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10383.00 2009-Mar-03 22:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:53:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Mar-03 22:53:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Mar-03 22:53:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Mar-03 22:53:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 22:53:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:53:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:53:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:53:13 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-03 22:53:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:53:13 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-03 22:53:13 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-03 22:53:13 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:53:13 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-03 22:53:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:53:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:53:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:53:13 LOG2 antvel: Parameters to Doppler: Topocentric 96793 2009 62 0.0 2009-Mar-03 22:53:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:53:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-03 22:53:13 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-03 22:53:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:53:13 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:53:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:53:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-03 22:53:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:53:13 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-03 22:53:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:53:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.237171 2009.1723576254215 18.999933 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333394 22.873333333333338 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 1 9.185631545073251 22.772084227806111 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 2 9.189840519702008 22.850338613551656 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 3 9.187636559259914 22.952038739485211 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 4 9.180974670047350 22.974393703760096 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 5 9.176746215551233 22.894449201690392 2009-Mar-03 22:53:13 LOG4 log_alfabeam: ALFABEAM 6 9.179198291406387 22.793867612158881 2009-Mar-03 22:53:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200173 2009-Mar-03 22:53:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:53:14 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-03 22:53:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:53:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Mar-03 22:53:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-03 22:53:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10395.00 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:53:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Mar-03 22:53:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 22:53:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 22:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 22:53:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 22:53:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:53:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:53:25 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-03 22:53:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:53:25 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-03 22:53:25 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-03 22:53:25 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:53:25 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-03 22:53:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:53:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:53:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:53:25 LOG2 antvel: Parameters to Doppler: Topocentric 96805 2009 62 0.0 2009-Mar-03 22:53:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:53:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-03 22:53:25 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-03 22:53:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:53:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:53:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:53:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-03 22:53:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:53:25 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-03 22:53:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:53:25 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.240513 2009.1723580056785 18.999933 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333378 22.873333333333338 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 1 9.185707656928027 22.772420422855895 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 2 9.189857562306662 22.851277213796241 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 3 9.187576907928882 22.952654012719410 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 4 9.180898681943031 22.974049100600791 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 5 9.176730747461891 22.893501960798197 2009-Mar-03 22:53:25 LOG4 log_alfabeam: ALFABEAM 6 9.179258208506136 22.793277638667444 2009-Mar-03 22:53:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200174 2009-Mar-03 22:53:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:53:26 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-03 22:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:53:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:53:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 22:53:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-03 22:53:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10407.00 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:53:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 22:53:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Mar-03 22:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Mar-03 22:53:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:53:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:53:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:53:37 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-03 22:53:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:53:37 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-03 22:53:37 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-03 22:53:37 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:53:37 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-03 22:53:37 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:53:37 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:53:37 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:53:37 LOG2 antvel: Parameters to Doppler: Topocentric 96817 2009 62 0.0 2009-Mar-03 22:53:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:53:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-03 22:53:37 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-03 22:53:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:53:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:53:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:53:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-03 22:53:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:53:37 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-03 22:53:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:53:37 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.243856 2009.1723583859357 18.999933 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333351 22.873333333333338 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 1 9.185783306639696 22.772766594254612 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 2 9.189873856554041 22.852215726875130 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 3 9.187516952633137 22.953259035768514 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 4 9.180823168818636 22.973694595403618 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 5 9.176716036247807 22.892555266063365 2009-Mar-03 22:53:37 LOG4 log_alfabeam: ALFABEAM 6 9.179318390262567 22.792697919132635 2009-Mar-03 22:53:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200175 2009-Mar-03 22:53:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:53:38 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-03 22:53:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:53:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:53:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-03 22:53:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10419.00 2009-Mar-03 22:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:53:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:53:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Mar-03 22:53:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Mar-03 22:53:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.091 (still bad) 2009-Mar-03 22:53:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Mar-03 22:53:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:53:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:53:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:53:49 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-03 22:53:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:53:49 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-03 22:53:49 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-03 22:53:49 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:53:49 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-03 22:53:49 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:53:49 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:53:49 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:53:49 LOG2 antvel: Parameters to Doppler: Topocentric 96829 2009 62 0.0 2009-Mar-03 22:53:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:53:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-03 22:53:49 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-03 22:53:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:53:49 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-03 22:53:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:53:49 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-03 22:53:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:53:49 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.247198 2009.1723587661927 18.999933 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333433 22.873333333333338 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 1 9.185858428812770 22.773122330309388 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 2 9.189889394225300 22.853153289897698 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 3 9.187456751457759 22.953853343516919 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 4 9.180748195780035 22.973330609447352 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 5 9.176702088091337 22.891609986105180 2009-Mar-03 22:53:49 LOG4 log_alfabeam: ALFABEAM 6 9.179378778686385 22.792128887377530 2009-Mar-03 22:53:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200176 2009-Mar-03 22:53:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:53:50 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-03 22:53:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:53:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:53:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:53:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:53:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-03 22:53:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10431.00 2009-Mar-03 22:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.091 (still bad) 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:53:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:53:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:53:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.088 (still bad) 2009-Mar-03 22:53:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:53:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Mar-03 22:53:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.089 (still bad) 2009-Mar-03 22:53:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:53:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:53:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.901 1.027 1.022 2009-Mar-03 22:53:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.952 1.066 1.089 2009-Mar-03 22:53:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.979 0.977 1.052 2009-Mar-03 22:53:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.107 1.045 0.116 2009-Mar-03 22:54:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:54:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:54:01 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-03 22:54:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:54:01 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-03 22:54:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-03 22:54:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-03 22:54:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-03 22:54:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:54:01 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-03 22:54:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.087 (still bad) 2009-Mar-03 22:54:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:54:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-03 22:54:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:54:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:54:01 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-03 22:54:01 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-03 22:54:01 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:54:01 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-03 22:54:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:54:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:54:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:54:01 LOG2 antvel: Parameters to Doppler: Topocentric 96841 2009 62 0.0 2009-Mar-03 22:54:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:54:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-03 22:54:01 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-03 22:54:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:54:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:54:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:54:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-03 22:54:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:54:01 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-03 22:54:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:54:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.250540 2009.1723591464497 18.999933 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333334 22.873333333333346 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 1 9.185933026687401 22.773487521678611 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 2 9.189904182516097 22.854089885937761 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 3 9.187396308744361 22.954437026205397 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 4 9.180673759403662 22.972957254004015 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 5 9.176688895184718 22.890666135567898 2009-Mar-03 22:54:01 LOG4 log_alfabeam: ALFABEAM 6 9.179439369786603 22.791570444818845 2009-Mar-03 22:54:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200177 2009-Mar-03 22:54:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:54:02 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-03 22:54:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:54:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-03 22:54:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-03 22:54:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10443.00 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:54:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.593 (still bad) 2009-Mar-03 22:54:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.603 (still bad) 2009-Mar-03 22:54:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Mar-03 22:54:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.592 (still bad) 2009-Mar-03 22:54:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:54:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Mar-03 22:54:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:54:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:54:13 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-03 22:54:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:54:13 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-03 22:54:13 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-03 22:54:13 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:54:13 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-03 22:54:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:54:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:54:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:54:13 LOG2 antvel: Parameters to Doppler: Topocentric 96853 2009 62 0.0 2009-Mar-03 22:54:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:54:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-03 22:54:13 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-03 22:54:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:54:13 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:54:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:54:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-03 22:54:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:54:13 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-03 22:54:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:54:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.253883 2009.1723595267067 18.999933 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333369 22.873333333333338 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 1 9.186007103567499 22.773862063904001 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 2 9.189918228391187 22.855025500936712 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 3 9.187335628534505 22.955010172156154 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 4 9.180599856205689 22.972574635394473 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 5 9.176676449966367 22.889723726192038 2009-Mar-03 22:54:13 LOG4 log_alfabeam: ALFABEAM 6 9.179500159872374 22.791022495016211 2009-Mar-03 22:54:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200178 2009-Mar-03 22:54:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:54:14 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-03 22:54:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:54:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-03 22:54:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-03 22:54:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10455.00 2009-Mar-03 22:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:54:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.583 (still bad) 2009-Mar-03 22:54:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:54:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.591 (still bad) 2009-Mar-03 22:54:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.585 (still bad) 2009-Mar-03 22:54:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.584 (still bad) 2009-Mar-03 22:54:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.584 (still bad) 2009-Mar-03 22:54:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:54:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:54:25 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-03 22:54:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:54:25 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-03 22:54:25 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-03 22:54:25 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:54:25 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-03 22:54:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:54:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:54:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:54:25 LOG2 antvel: Parameters to Doppler: Topocentric 96865 2009 62 0.0 2009-Mar-03 22:54:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:54:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-03 22:54:25 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-03 22:54:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:54:25 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:54:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:54:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-03 22:54:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:54:25 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-03 22:54:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:54:25 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.257225 2009.1723599069639 18.999933 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333350 22.873333333333338 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 1 9.186080597067386 22.774245509031299 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 2 9.189931526972252 22.855959285791258 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 3 9.187274769312204 22.955572367684095 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 4 9.180526548221358 22.972183210493874 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 5 9.176664755289851 22.888783610212620 2009-Mar-03 22:54:25 LOG4 log_alfabeam: ALFABEAM 6 9.179561090760471 22.790485421226073 2009-Mar-03 22:54:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200179 2009-Mar-03 22:54:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:54:26 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-03 22:54:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:54:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-03 22:54:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-03 22:54:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10467.00 2009-Mar-03 22:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.584 (still bad) 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:54:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.582 (still bad) 2009-Mar-03 22:54:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 22:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.581 (still bad) 2009-Mar-03 22:54:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.581 (still bad) 2009-Mar-03 22:54:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.581 (still bad) 2009-Mar-03 22:54:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:54:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Mar-03 22:54:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:54:37 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-03 22:54:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:54:37 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-03 22:54:37 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-03 22:54:37 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:54:37 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-03 22:54:37 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:54:37 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:54:37 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:54:37 LOG2 antvel: Parameters to Doppler: Topocentric 96877 2009 62 0.0 2009-Mar-03 22:54:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:54:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-03 22:54:37 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-03 22:54:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:54:37 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:54:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:54:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-03 22:54:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:54:37 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-03 22:54:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:54:37 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.260568 2009.172360287221 18.999933 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333403 22.873333333333338 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 1 9.186153533819246 22.774637857062576 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 2 9.189944090376793 22.856891514664440 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 3 9.187213716764269 22.956123889080565 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 4 9.180453808672329 22.971782978433545 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 5 9.176653798942247 22.887845508178632 2009-Mar-03 22:54:37 LOG4 log_alfabeam: ALFABEAM 6 9.179622177216590 22.789958947152215 2009-Mar-03 22:54:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200180 2009-Mar-03 22:54:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:54:38 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-03 22:54:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:54:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-03 22:54:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-03 22:54:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10479.00 2009-Mar-03 22:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:54:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Mar-03 22:54:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Mar-03 22:54:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Mar-03 22:54:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad) 2009-Mar-03 22:54:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:54:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:54:49 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-03 22:54:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:54:49 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-03 22:54:49 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-03 22:54:49 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:54:49 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-03 22:54:49 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:54:49 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:54:49 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:54:49 LOG2 antvel: Parameters to Doppler: Topocentric 96889 2009 62 0.0 2009-Mar-03 22:54:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:54:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-03 22:54:49 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-03 22:54:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:54:49 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:54:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:54:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-03 22:54:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:54:49 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-03 22:54:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:54:49 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.263910 2009.172360667478 18.999933 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333353 22.873333333333338 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 1 9.186225853583899 22.775038638869805 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 2 9.189955915859317 22.857821350477906 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 3 9.187152529398253 22.956664356822206 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 4 9.180381697411795 22.971374416779344 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 5 9.176643581665898 22.886910258632472 2009-Mar-03 22:54:49 LOG4 log_alfabeam: ALFABEAM 6 9.179683361162551 22.789443422647114 2009-Mar-03 22:54:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200181 2009-Mar-03 22:54:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:54:50 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-03 22:54:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:54:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-03 22:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.566 (still bad) 2009-Mar-03 22:54:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:54:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-03 22:54:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10491.00 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:54:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.566 (still bad) 2009-Mar-03 22:54:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.540 (still bad) 2009-Mar-03 22:54:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.540 (still bad) 2009-Mar-03 22:54:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 22:54:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.533 (still bad) 2009-Mar-03 22:54:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:54:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:55:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.398 1.240 1.424 1.414 2009-Mar-03 22:55:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.416 1.332 1.504 1.509 2009-Mar-03 22:55:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.536 1.384 1.396 1.422 2009-Mar-03 22:55:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.344 0.107 1.481 0.117 2009-Mar-03 22:55:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:55:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:55:01 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-03 22:55:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:55:01 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-03 22:55:01 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-03 22:55:01 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:55:01 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-03 22:55:01 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:55:01 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:55:01 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:55:01 LOG2 antvel: Parameters to Doppler: Topocentric 96901 2009 62 0.0 2009-Mar-03 22:55:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:55:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-03 22:55:01 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-03 22:55:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:55:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:55:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:55:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-03 22:55:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:55:01 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-03 22:55:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:55:01 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.267253 2009.172361047735 18.999933 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333328 22.873333333333328 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 1 9.186297583782096 22.775447855257717 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 2 9.189967015863900 22.858749075747767 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 3 9.187091192437881 22.957194055196403 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 4 9.180310186866645 22.970957523602983 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 5 9.176634090953357 22.885977573232150 2009-Mar-03 22:55:01 LOG4 log_alfabeam: ALFABEAM 6 9.179744657861660 22.788938564028971 2009-Mar-03 22:55:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200182 2009-Mar-03 22:55:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:55:02 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-03 22:55:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:55:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-03 22:55:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.538 (still bad) 2009-Mar-03 22:55:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-03 22:55:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10503.00 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.538 (still bad) 2009-Mar-03 22:55:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.531 (still bad) 2009-Mar-03 22:55:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.534 (still bad) 2009-Mar-03 22:55:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.532 (still bad) 2009-Mar-03 22:55:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.531 (still bad) 2009-Mar-03 22:55:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:55:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:55:13 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-03 22:55:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:55:13 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-03 22:55:13 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-03 22:55:13 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:55:13 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-03 22:55:13 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:55:13 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:55:13 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:55:13 LOG2 antvel: Parameters to Doppler: Topocentric 96913 2009 62 0.0 2009-Mar-03 22:55:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:55:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-03 22:55:13 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-03 22:55:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:55:13 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-03 22:55:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-03 22:55:13 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-03 22:55:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:55:13 LOG5 log_alfabeam: Parameters: 9.1833333333333336 22.873333333333335 9.270595 2009.172361427992 18.999933 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 0 9.183333333333332 22.873333333333328 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 1 9.186368666408807 22.775865018393993 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 2 9.189977389687838 22.859673867472583 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 3 9.187029764229178 22.957712638444281 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 4 9.180239334624414 22.970532794667054 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 5 9.176625325536383 22.885048274842962 2009-Mar-03 22:55:13 LOG4 log_alfabeam: ALFABEAM 6 9.179806009517778 22.788444688271770 2009-Mar-03 22:55:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906200183 2009-Mar-03 22:55:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-03 22:55:14 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-03 22:55:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-03 22:55:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-03 22:55:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10515.00 2009-Mar-03 22:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.533 (still bad) 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:55:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.522 (still bad) 2009-Mar-03 22:55:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.530 (still bad) 2009-Mar-03 22:55:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.528 (still bad) 2009-Mar-03 22:55:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.527 (still bad) 2009-Mar-03 22:55:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.527 (still bad) 2009-Mar-03 22:55:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 22:55:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:55:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-03 22:55:25 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-03 22:55:25 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 INFO2 smartfreq: Switching off CAL 2009-Mar-03 22:55:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 22:55:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 22:55:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:55:25 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:55:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:55:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:55:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:55:25 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 INFO3 restore_frequencies: Restoring original frequencies 2009-Mar-03 22:55:25 LOG5 antvel: Calling 'antvel 91100.000000 225224.000000 J Topocentric 0' 2009-Mar-03 22:55:25 LOG2 antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:55:25 LOG2 antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:55:25 LOG2 antvel: Parameters to Doppler: Topocentric 96925 2009 62 0.0 2009-Mar-03 22:55:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:55:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-03 22:55:25 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-03 22:55:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:55:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:55:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:55:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:25 STOP finish_task: Finishing task 'smart frequency switching' 2009-Mar-03 22:55:25 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Mar-03 22:55:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:55:25 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Mar-03 22:55:25 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-03 22:55:25 NOTE run_command_file: DONE with command file processing 2009-Mar-03 22:55:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-03 22:55:26 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-03 22:55:26 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-03 22:55:26 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Mar-03 22:55:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:55:26 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Mar-03 22:55:26 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-03 22:55:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:55:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.526 (still bad) 2009-Mar-03 22:55:35 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-03 22:55:35 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-03 22:55:35 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-03 22:55:35 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-03 22:55:35 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-03 22:55:35 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-03 22:55:35 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-03 22:55:35 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-03 22:55:35 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-03 22:55:35 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-03 22:55:35 LOG3 exec_msg: Closing socket 2009-Mar-03 22:55:35 LOG3 exec_msg: Closing socket 2009-Mar-03 22:55:35 LOG3 exec_msg: Closing socket 2009-Mar-03 22:55:35 LOG3 exec_msg: Closing socket 2009-Mar-03 22:55:37 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-03 22:55:38 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-03 22:55:38 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-03 22:55:38 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-03 22:56:03 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Mar-03 22:56:04 LOG2 CIMA-antvel: Precessing RA = 09:11:00.0 Dec = +22:52:24.0 Epoch = 2009.17236 J 2009-Mar-03 22:56:04 LOG2 CIMA-antvel: Computed apparent RA = 09:11:34.0 Dec = +22:50:03.4 2009-Mar-03 22:56:04 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96963 2009 62 0.0 2009-Mar-03 22:56:04 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-03 22:56:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-03 22:56:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-03 22:56:05 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-03 22:56:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-03 22:56:06 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-03 22:56:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-03 22:56:06 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-03 22:56:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:56:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:56:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:56:06 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:56:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:56:06 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:56:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:56:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-03 22:56:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-03 22:56:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-03 22:56:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-03 22:56:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-03 22:56:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-03 22:56:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-03 22:56:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-03 22:56:06 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-03 22:56:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-03 22:56:06 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-03 22:56:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-03 22:56:06 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-03 22:56:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:56:06 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-03 22:56:06 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-03 22:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-03 22:56:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-03 22:56:07 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-03 22:56:07 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-03 22:56:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-03 22:56:07 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-03 22:56:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-03 22:56:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-03 22:56:07 START begin_task: Starting task 'selecting calibration port' 2009-Mar-03 22:56:07 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-03 22:56:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-03 22:56:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:07 START begin_task: Starting task 'waiting on calport' 2009-Mar-03 22:56:07 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Mar-03 22:56:07 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-03 22:56:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:56:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-03 22:56:07 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-03 22:56:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-03 22:56:07 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 22:56:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 22:56:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:56:07 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:56:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:56:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:56:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:56:07 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-03 22:56:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 22:56:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 22:56:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-03 22:56:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-03 22:56:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 22:56:08 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-03 22:56:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 22:56:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-03 22:56:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 22:56:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 22:56:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 22:56:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 22:56:08 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-03 22:56:08 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-03 22:56:08 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-03 22:56:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:56:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-03 22:56:08 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-03 22:56:08 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Mar-03 22:56:08 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Mar-03 22:56:08 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:56:08 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-03 22:56:08 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-03 22:56:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-03 22:56:08 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:56:08 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-03 22:56:08 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-03 22:56:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:56:08 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-03 22:56:08 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-03 22:56:09 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Mar-03 22:56:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-03 22:56:09 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-03 22:56:52 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Mar-03 22:56:52 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Mar-03 22:56:52 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:56:52 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-03 22:56:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-03 22:56:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-03 22:56:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-03 22:56:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-03 22:56:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:52 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-03 22:56:52 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-03 22:56:52 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-03 22:56:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:56:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-03 22:56:55 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-03 22:56:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-03 22:56:55 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:56:55 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-03 22:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-03 22:56:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:56:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:56:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:56:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:56:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-03 22:56:55 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-03 22:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:56:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-03 22:56:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-03 22:56:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-03 22:56:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-03 22:56:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-03 22:56:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-03 22:56:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-03 22:56:56 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-03 22:56:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.005 0.913 ALFA beam 1: 1.043 1.037 2009-Mar-03 22:56:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.012 0.964 ALFA beam 3: 1.058 1.077 2009-Mar-03 22:56:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.075 0.962 ALFA beam 5: 0.996 1.048 2009-Mar-03 22:56:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.925 0.104 ALFA beam 7: 1.028 0.113 2009-Mar-03 22:56:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:56:56 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-03 22:56:56 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Mar-03 22:56:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:56:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:56:56 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-03 22:56:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Mar-03 22:56:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:56:56 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-03 22:56:56 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-03 22:56:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-03 22:56:56 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:56:56 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-03 22:56:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Mar-03 22:56:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.913 1.043 1.037 2009-Mar-03 22:56:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.964 1.058 1.077 2009-Mar-03 22:56:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.962 0.996 1.048 2009-Mar-03 22:56:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.104 1.028 0.113 2009-Mar-03 22:57:00 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Mar-03 22:57:00 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p2 092000.0 +225224 J 0 Topocentric velocity(optical) 2009-Mar-03 22:57:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p2 092000.0 +225224 J 0 Topocentric velocity(optical)' 2009-Mar-03 22:57:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-03 22:57:00 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-03 22:57:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Mar-03 22:57:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-03 22:57:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift94p2} 2009-Mar-03 22:57:00 INFO5 fixed_driftmap: Start: year = 2009.1723648186176 RA = 09:20:33.9 Dec = +22:49:58.1 2009-Mar-03 22:57:00 NOTE fixed_driftmap: Setting ZA to 4:28:44.4 ... 2009-Mar-03 22:57:00 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.48 2009-Mar-03 22:57:00 LOG3 track_source: Calling 'track_source drift94p2 180.0 4.4789922185 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Mar-03 22:57:00 START begin_task: Starting task 'sending tracking commands' 2009-Mar-03 22:57:00 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-03 22:57:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p2} INFO {Slewing to source 'drift94p2' ...} 2009-Mar-03 22:57:01 INFO1 track_source: Starting to track drift94p2 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p2" 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: set dec 4.4789922185 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.4789922185 -CF 2009-Mar-03 22:57:01 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-03 22:57:01 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-03 22:57:01 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-03 22:57:01 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-03 22:57:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:57:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-03 22:57:01 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-03 22:57:01 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:57:01 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-03 22:57:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-03 22:57:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-03 22:57:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Mar-03 22:57:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-03 22:57:01 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-03 22:57:01 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p2" 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: set dec 4.4789922185 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: vw% 4.4789922185 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.4789922185 -CF 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-03 22:57:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:57:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-03 22:57:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-03 22:57:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-03 22:57:02 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-03 22:57:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:57:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-03 22:57:02 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-03 22:57:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-03 22:57:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:57:02 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-03 22:57:02 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-03 22:57:02 START begin_task: Starting task 'waiting on telescope' 2009-Mar-03 22:57:02 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-03 22:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-03 22:57:02 LOG3 waittrk: Start waittrk 5 2009-Mar-03 22:57:02 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-03 22:57:02 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-03 22:57:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-03 22:57:07 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-03 22:57:07 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-03 22:57:07 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:57:59 INFO2 waittrk: Now tracking drift94p2 2009-Mar-03 22:57:59 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 4.50 2009-Mar-03 22:57:59 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-03 22:57:59 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-03 22:57:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 START begin_task: Starting task 'selecting calibration type' 2009-Mar-03 22:57:59 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-03 22:57:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-03 22:57:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:57:59 START begin_task: Starting task 'waiting on setcal' 2009-Mar-03 22:57:59 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-03 22:57:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:57:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-03 22:57:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:57:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-03 22:57:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:57:59 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:57:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:57:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-03 22:57:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 22:57:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:57:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 22:57:59 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 22:57:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-03 22:57:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-03 22:57:59 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-03 22:57:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-03 22:57:59 INFO2 astwait: Waiting for 33 seconds from 02:57:59 to 02:58:32 UTC ... 2009-Mar-03 22:57:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 33 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-03 22:57:59 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-03 22:57:59 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-03 22:58:32 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-03 22:58:32 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-03 22:58:32 INFO3 astwait: Finished waiting 2009-Mar-03 22:58:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:58:32 LOG5 dopset_later: Calling 'dopset_later 61.047792265516442' 2009-Mar-03 22:58:32 INFO3 dopset_later: Setting Doppler correction for 22:59:32 (61 seconds from now) 2009-Mar-03 22:58:32 LOG5 antvel: Calling 'antvel 180.000000 4.478992 F Topocentric 61.047792265516442' 2009-Mar-03 22:58:32 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.48 to apparent RA = 09:20:33.7 Dec = +22:49:58.1 2009-Mar-03 22:58:32 LOG2 antvel: Parameters to Doppler: Topocentric 97172 2009 62 0.0 2009-Mar-03 22:58:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-03 22:58:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-03 22:58:32 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-03 22:58:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-03 22:58:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-03 22:58:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:58:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:58:32 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:58:32 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-03 22:58:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-03 22:58:32 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-03 22:58:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-03 22:58:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-03 22:58:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:58:32 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-03 22:58:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:58:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:58:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 22:58:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-03 22:58:35 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-03 22:58:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-03 22:58:35 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-03 22:58:35 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-03 22:58:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-03 22:58:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:58:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:58:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:58:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-03 22:58:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-03 22:58:35 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-03 22:58:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 22:58:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-03 22:58:35 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-03 22:58:35 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 3 dB 2009-Mar-03 22:58:35 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-03 22:58:35 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-03 22:58:35 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-03 22:58:35 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-03 22:58:35 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-03 22:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.006 0.911 ALFA beam 1: 1.043 1.038 2009-Mar-03 22:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.016 0.966 ALFA beam 3: 1.088 1.101 2009-Mar-03 22:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.098 0.990 ALFA beam 5: 1.009 1.072 2009-Mar-03 22:58:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.933 0.107 ALFA beam 7: 1.032 0.116 2009-Mar-03 22:58:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:58:36 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-03 22:58:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-03 22:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:58:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:58:36 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-03 22:58:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-03 22:58:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-03 22:58:36 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-03 22:58:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-03 22:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 22:58:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-03 22:58:36 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-03 22:58:36 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:20:33.9 LST = 09:19:36.7 diff = 57.2 secs 2009-Mar-03 22:58:36 INFO2 fixed_driftmap: Waiting 55.2 seconds for RA 9:20:34 2009-Mar-03 22:58:36 INFO2 lstwait: Waiting for 55.1 secs from LST 09:19:37 to LST 09:20:32 ... 2009-Mar-03 22:58:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.053803061678309 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-03 22:58:36 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-03 22:58:36 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-03 22:58:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:58:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.911 1.043 1.038 2009-Mar-03 22:58:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.966 1.088 1.101 2009-Mar-03 22:58:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.990 1.009 1.072 2009-Mar-03 22:58:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.032 0.116 2009-Mar-03 22:59:31 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-03 22:59:31 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-03 22:59:31 LOG4 lstwait: Finished waiting 0.95 seconds late 2009-Mar-03 22:59:31 INFO3 lstwait: Finished waiting 2009-Mar-03 22:59:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-03 22:59:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 22:59:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 22:59:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 22:59:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 22:59:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Mar-03 22:59:31 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-03 22:59:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-03 22:59:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-03 22:59:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-03 22:59:31 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-03 22:59:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-03 22:59:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-03 22:59:31 INFO2 take_data: Starting WAPP 600-second scan: 906200184 2009-Mar-03 22:59:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-03 22:59:32 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-03 22:59:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 22:59:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20090303.a2010.0034.fits 2009-Mar-03 22:59:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 22:59:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090303.a2010.0034.fits} 2009-Mar-03 22:59:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-03 22:59:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10773.00 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 22:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 22:59:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 22:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 22:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 22:59:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.910 1.045 1.039 2009-Mar-03 22:59:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.965 1.086 1.101 2009-Mar-03 22:59:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.989 1.008 1.073 2009-Mar-03 22:59:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.107 1.029 0.116 2009-Mar-03 22:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 22:59:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 22:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 22:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 22:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 22:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 22:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 22:59:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 22:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 22:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 22:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 22:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:00:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:00:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.911 1.046 1.042 2009-Mar-03 23:00:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.968 1.086 1.100 2009-Mar-03 23:00:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.982 1.003 1.072 2009-Mar-03 23:00:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.107 1.030 0.116 2009-Mar-03 23:00:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:00:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:01:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:01:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.910 1.043 1.039 2009-Mar-03 23:01:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.967 1.085 1.101 2009-Mar-03 23:01:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.980 1.004 1.068 2009-Mar-03 23:01:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.107 1.029 0.116 2009-Mar-03 23:01:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:02:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:02:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.909 1.043 1.041 2009-Mar-03 23:02:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.967 1.087 1.099 2009-Mar-03 23:02:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.980 1.004 1.067 2009-Mar-03 23:02:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.029 0.116 2009-Mar-03 23:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:02:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:03:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:03:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.912 1.045 1.041 2009-Mar-03 23:03:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.969 1.087 1.102 2009-Mar-03 23:03:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.980 1.007 1.069 2009-Mar-03 23:03:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.028 0.116 2009-Mar-03 23:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:03:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:04:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:04:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:04:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Mar-03 23:04:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:04:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.911 1.047 1.041 2009-Mar-03 23:04:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.969 1.089 1.101 2009-Mar-03 23:04:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.982 1.008 1.064 2009-Mar-03 23:04:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.027 0.116 2009-Mar-03 23:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Mar-03 23:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:04:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:04:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:04:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:05:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Mar-03 23:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:05:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:05:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:05:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:05:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:05:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:05:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 23:05:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:05:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:05:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:05:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:05:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:05:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:05:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:05:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:05:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:05:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:05:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.912 1.047 1.042 2009-Mar-03 23:05:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.970 1.091 1.103 2009-Mar-03 23:05:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.986 1.007 1.069 2009-Mar-03 23:05:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.107 1.029 0.116 2009-Mar-03 23:05:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Mar-03 23:05:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:05:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:05:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:05:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Mar-03 23:05:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:05:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:05:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:06:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:06:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:06:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:06:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:06:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:06:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:06:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:06:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:06:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:06:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Mar-03 23:06:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Mar-03 23:06:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:06:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:06:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Mar-03 23:06:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:06:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Mar-03 23:06:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Mar-03 23:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:06:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:06:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 23:06:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:06:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.910 1.046 1.043 2009-Mar-03 23:06:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.971 1.091 1.102 2009-Mar-03 23:06:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.987 1.006 1.065 2009-Mar-03 23:06:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.029 0.116 2009-Mar-03 23:06:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:06:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:06:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:06:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:06:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:06:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:06:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:07:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:07:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:07:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Mar-03 23:07:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:07:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:07:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:07:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:07:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:07:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:07:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:07:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:07:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:07:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:07:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.911 1.047 1.044 2009-Mar-03 23:07:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.973 1.090 1.105 2009-Mar-03 23:07:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.988 1.010 1.063 2009-Mar-03 23:07:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.028 0.116 2009-Mar-03 23:07:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:07:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:07:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 23:07:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:07:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:08:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:08:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:08:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:08:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:08:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:08:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:08:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:08:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:08:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:08:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.909 1.044 1.045 2009-Mar-03 23:08:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.973 1.091 1.107 2009-Mar-03 23:08:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.986 1.008 1.065 2009-Mar-03 23:08:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.107 1.027 0.116 2009-Mar-03 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:08:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:09:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:09:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Mar-03 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Mar-03 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:09:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Mar-03 23:09:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:09:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:09:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-03 23:09:33 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-03 23:09:33 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG1 fixed_driftmap: New position: year = 2009.1723886797477 RA = 09:30:03.6 RA/Dec = 09:30:37.4 +22:49:52.4 2009-Mar-03 23:09:33 NOTE fixed_driftmap: Correcting ZA to 4:28:38.7 ... 2009-Mar-03 23:09:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4774068295 -CF 2009-Mar-03 23:09:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Mar-03 23:09:33 START begin_task: Starting task 'WAPP calibration' 2009-Mar-03 23:09:33 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-03 23:09:33 START begin_task: Starting task 'selecting calibration type' 2009-Mar-03 23:09:33 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-03 23:09:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-03 23:09:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 23:09:33 START begin_task: Starting task 'waiting on setcal' 2009-Mar-03 23:09:33 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4774068295 -CF 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-03 23:09:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-03 23:09:33 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-03 23:09:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 23:09:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-03 23:09:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 23:09:33 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-03 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-03 23:09:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 23:09:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 23:09:34 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 23:09:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-03 23:09:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-03 23:09:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-03 23:09:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-03 23:09:34 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-03 23:09:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-03 23:09:34 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-03 23:09:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-03 23:09:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-03 23:09:34 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-03 23:09:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-03 23:09:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-03 23:09:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 23:09:34 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 23:09:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-03 23:09:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 23:09:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 23:09:34 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Mar-03 23:09:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-03 23:09:34 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Mar-03 23:09:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-03 23:09:34 INFO2 take_data: Starting WAPP 1-second scan: 906200185 2009-Mar-03 23:09:34 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-03 23:09:34 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-03 23:09:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 23:09:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-03 23:09:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11375.00 2009-Mar-03 23:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 23:09:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 23:09:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-03 23:09:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-03 23:09:36 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-03 23:09:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-03 23:09:36 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-03 23:09:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-03 23:09:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-03 23:09:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-03 23:09:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-03 23:09:36 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-03 23:09:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-03 23:09:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-03 23:09:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-03 23:09:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-03 23:09:36 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-03 23:09:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-03 23:09:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-03 23:09:36 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-03 23:09:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-03 23:09:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-03 23:09:37 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-03 23:09:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-03 23:09:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan 2009-Mar-03 23:09:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan 2009-Mar-03 23:09:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan 2009-Mar-03 23:09:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-03 23:09:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-03 23:09:37 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-03 23:09:37 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-03 23:09:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-03 23:09:37 INFO2 take_data: Starting WAPP 600-second scan: 906200186 2009-Mar-03 23:09:37 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-03 23:09:37 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-03 23:09:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan' 2009-Mar-03 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.560 (still bad) 2009-Mar-03 23:09:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-03 23:09:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11378.00 2009-Mar-03 23:09:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20090303.a2010.0035.fits 2009-Mar-03 23:09:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090303.a2010.0035.fits} 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.118897 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1058.754542 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 961.245278 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-03 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:09:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:09:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:09:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:09:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:09:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:09:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.910 1.045 1.046 2009-Mar-03 23:09:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.974 1.093 1.108 2009-Mar-03 23:09:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.988 1.010 1.065 2009-Mar-03 23:09:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.107 1.026 0.116 2009-Mar-03 23:09:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:10:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:10:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:10:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:10:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:10:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Mar-03 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Mar-03 23:10:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:10:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Mar-03 23:10:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-03 23:10:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad) 2009-Mar-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:10:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:10:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:10:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Mar-03 23:10:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.909 1.044 1.043 2009-Mar-03 23:10:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.976 1.091 1.105 2009-Mar-03 23:10:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.987 1.010 1.066 2009-Mar-03 23:10:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.107 1.025 0.116 2009-Mar-03 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad) 2009-Mar-03 23:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:11:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:11:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:11:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Mar-03 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Mar-03 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Mar-03 23:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Mar-03 23:11:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-03 23:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Mar-03 23:11:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99