2009-Mar-01 22:45:42 BEGIN executive: CIMA executive starting ... 2009-Mar-01 22:45:42 NOTE executive: STARTING NEW CIMA SESSION 2009-Mar-01 22:45:42 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Mar-01 22:45:42 INFO4 executive: This is an ON-LINE session 2009-Mar-01 22:45:42 INFO4 executive: This is a LOCAL session 2009-Mar-01 22:45:43 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Mar-01 22:45:43 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Shan, Riccardo' 2009-Mar-01 22:45:43 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090301' 2009-Mar-01 22:45:43 LOG2 log_preferences: Currently applied preferences: 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(dailylog) = daily 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(datawindow) = open 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(logcolours) = full 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(displayformat) = long 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(logformat) = new 2009-Mar-01 22:45:43 LOG2 log_preferences: prefs(fontsize) = 3 2009-Mar-01 22:45:43 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-01 22:45:43 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-01 22:45:43 ALERT executive: CIMA executive ready 2009-Mar-01 22:45:44 NOTE frontend: CIMA frontend ready 2009-Mar-01 22:45:47 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Mar-01 22:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:45:47 LOG4 got_cormsg: From DATATAKING: setup 2009-Mar-01 22:45:54 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Mar-01 22:45:54 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Mar-01 22:45:54 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-01 22:45:54 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-01 22:45:54 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-01 22:45:54 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-01 22:45:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-01 22:45:54 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-01 22:45:54 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-01 22:45:54 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-01 22:45:54 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-01 22:45:54 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-01 22:45:54 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Mar-01 22:45:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:45:54 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-01 22:45:54 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Mar-01 22:45:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Mar-01 22:45:55 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:46:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:46:03 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-01 22:46:04 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-01 22:46:04 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-01 22:46:04 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-01 22:46:04 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-01 22:46:04 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-01 22:46:04 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-01 22:46:04 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-01 22:46:04 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-01 22:46:04 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-01 22:46:07 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-01 22:46:07 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-01 22:46:07 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-01 22:46:07 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-01 22:46:54 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Mar-01 22:46:59 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Mar-01 22:46:59 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Mar-01 22:46:59 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Mar-01 22:46:59 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-01 22:46:59 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-01 22:46:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Mar-01 22:46:59 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Mar-01 22:46:59 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Mar-01 22:46:59 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-01 22:46:59 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-01 22:46:59 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-01 22:46:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-01 22:47:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-01 22:47:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-01 22:47:01 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-01 22:47:01 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-01 22:47:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-01 22:47:01 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-01 22:47:01 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-01 22:47:01 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Mar-01 22:47:01 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-01 22:47:01 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-01 22:47:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-01 22:47:01 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Mar-01 22:47:01 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-01 22:47:01 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-01 22:47:01 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-01 22:47:01 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-01 22:47:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:47:01 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-01 22:47:01 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-01 22:47:01 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-01 22:47:01 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-01 22:47:01 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-01 22:47:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-01 22:47:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:47:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:47:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:47:02 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-01 22:47:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:47:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:47:02 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-01 22:47:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:47:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-01 22:47:02 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-01 22:47:02 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-01 22:47:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-01 22:47:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:02 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-01 22:47:02 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-01 22:47:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:47:17 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-01 22:47:17 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Mar-01 22:47:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-01 22:47:17 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-01 22:47:17 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-01 22:47:17 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-01 22:47:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:47:17 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-01 22:47:17 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-01 22:47:18 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-01 22:47:18 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-01 22:47:18 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-01 22:47:18 START begin_task: Starting task 'selecting calibration port' 2009-Mar-01 22:47:18 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-01 22:47:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-01 22:47:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:18 START begin_task: Starting task 'waiting on calport' 2009-Mar-01 22:47:18 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:47:18 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-01 22:47:18 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-01 22:47:18 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-01 22:47:18 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 22:47:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 22:47:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:47:18 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:47:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:47:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:47:18 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:18 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-01 22:47:18 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-01 22:47:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:47:18 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:47:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:47:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:47:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:47:18 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:19 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-01 22:47:19 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-01 22:47:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:47:19 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-01 22:47:19 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Mar-01 22:47:19 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Mar-01 22:47:19 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Mar-01 22:47:19 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Mar-01 22:47:19 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Mar-01 22:47:19 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Mar-01 22:47:19 LOG3 track_source: Calling 'track_source galfasrc 090100.0 +232136 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Mar-01 22:47:19 START begin_task: Starting task 'sending tracking commands' 2009-Mar-01 22:47:19 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Mar-01 22:47:19 INFO1 track_source: Starting to track galfasrc 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: set ra 090100.0 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: set dec +232136 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: pnt tr 090100.0 +232136 -CJ 2009-Mar-01 22:47:19 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-01 22:47:19 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-01 22:47:19 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-01 22:47:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:47:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-01 22:47:19 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Mar-01 22:47:19 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Mar-01 22:47:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:47:19 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Mar-01 22:47:19 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-01 22:47:19 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Mar-01 22:47:20 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Mar-01 22:47:20 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:47:20 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-01 22:47:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-01 22:47:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-01 22:47:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-01 22:47:20 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-01 22:47:20 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-01 22:47:20 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-01 22:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 22:47:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20090301.a2010.0032.fits 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Mar-01 22:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-01 22:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-01 22:47:20 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090301.a2010.0032.fits} 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: set ra 090100.0 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: set dec +232136 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: vw% 090100.0 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: vw% +232136 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: pnt tr 090100.0 +232136 -CJ 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-01 22:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 22:47:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-01 22:47:46 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-01 22:47:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-01 22:47:46 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-01 22:47:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:47:46 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:47:46 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-01 22:47:46 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-01 22:47:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:47:46 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-01 22:47:46 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-01 22:47:46 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Mar-01 22:47:46 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Mar-01 22:47:46 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-01 22:47:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-01 22:47:46 LOG3 waittrk: Start waittrk 5 2009-Mar-01 22:47:46 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-01 22:47:46 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-01 22:47:51 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-01 22:47:51 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-01 22:47:51 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:47:51 INFO2 waittrk: Now tracking galfasrc 2009-Mar-01 22:47:51 LOG4 waittrk: Current telescope position: Az = 181.31 ZA = 4.99 2009-Mar-01 22:47:51 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-01 22:47:51 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 DONE finish_task: DONE finished waiting: telescope on source 2009-Mar-01 22:47:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:47:51 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-01 22:47:51 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-01 22:47:51 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-01 22:47:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Mar-01 22:47:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-01 22:47:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Mar-01 22:47:52 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Mar-01 22:47:52 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Mar-01 22:47:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Mar-01 22:47:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Mar-01 22:47:52 START begin_task: Starting task 'selecting calibration type' 2009-Mar-01 22:47:52 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-01 22:47:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-01 22:47:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:52 START begin_task: Starting task 'waiting on setcal' 2009-Mar-01 22:47:52 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-01 22:47:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:47:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-01 22:47:52 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-01 22:47:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:47:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-01 22:47:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:47:52 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:47:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:47:52 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:47:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-01 22:47:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:47:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:47:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:47:52 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:47:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:47:52 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:47:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:47:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-01 22:47:52 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-01 22:47:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:47:53 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090301.a2010.0032.fits' is empty! 2009-Mar-01 22:47:53 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Mar-01 22:47:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-01 22:47:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-01 22:47:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 22:47:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 22:47:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:47:53 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-01 22:47:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:47:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:47:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:47:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:47:53 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-01 22:47:53 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-01 22:47:53 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:47:53 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-01 22:47:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-01 22:47:53 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-01 22:47:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-01 22:47:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-01 22:47:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:53 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-01 22:47:53 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-01 22:47:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-01 22:47:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:47:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 22:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:47:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-01 22:47:56 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-01 22:47:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-01 22:47:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:47:56 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-01 22:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-01 22:47:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:47:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:47:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:47:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:47:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-01 22:47:56 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-01 22:47:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-01 22:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-01 22:47:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Mar-01 22:47:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-01 22:47:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-01 22:47:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-01 22:47:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-01 22:47:57 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.991 0.901 ALFA beam 1: 1.046 1.051 2009-Mar-01 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.957 ALFA beam 3: 1.070 1.082 2009-Mar-01 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.080 0.964 ALFA beam 5: 0.999 1.005 2009-Mar-01 22:47:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.106 ALFA beam 7: 1.016 0.116 2009-Mar-01 22:47:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:47:57 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-01 22:47:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:47:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:47:57 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-01 22:47:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:47:57 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-01 22:47:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:47:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:47:57 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-01 22:47:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:47:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-01 22:47:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:47:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:47:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:47:57 LOG2 antvel: Parameters to Doppler: Topocentric 96476 2009 60 0.0 2009-Mar-01 22:47:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:47:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-01 22:47:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-01 22:47:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:47:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:47:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:47:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:47:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-01 22:47:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:47:57 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-01 22:47:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:47:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.017455 2009.1668718787232 18.999933 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666545 23.359999999999999 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 1 9.017734539566089 23.254903833234444 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 2 9.022837582285664 23.322581560898655 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 3 9.021861230305200 23.427887815536749 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 4 9.015543751355478 23.465049897088676 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 5 9.010402428987463 23.395891892506651 2009-Mar-01 22:47:57 LOG4 log_alfabeam: ALFABEAM 6 9.011616475587291 23.291076508597506 2009-Mar-01 22:47:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000183 2009-Mar-01 22:47:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:47:58 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-01 22:47:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:47:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:47:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:47:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:47:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10079.00 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:48:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:48:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.924 1.081 1.072 2009-Mar-01 22:48:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.984 1.142 1.126 2009-Mar-01 22:48:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.964 0.999 1.005 2009-Mar-01 22:48:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.109 1.040 0.119 2009-Mar-01 22:48:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-01 22:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-01 22:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-Mar-01 22:48:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-Mar-01 22:48:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:48:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:48:09 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-01 22:48:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:48:09 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-01 22:48:09 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-01 22:48:09 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:48:09 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-01 22:48:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:48:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:48:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:48:09 LOG2 antvel: Parameters to Doppler: Topocentric 96489 2009 60 0.0 2009-Mar-01 22:48:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:48:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-01 22:48:09 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-01 22:48:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:48:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:48:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:48:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-01 22:48:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:48:09 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-01 22:48:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:48:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.021076 2009.1668722906684 18.999933 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666692 23.360000000000003 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 1 9.017813653623872 23.255062163094816 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 2 9.022865466350284 23.323465704275424 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 3 9.021809766151483 23.428626733319337 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 4 9.015464541583132 23.464883681967567 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 5 9.010375711767628 23.394994222200154 2009-Mar-01 22:48:09 LOG4 log_alfabeam: ALFABEAM 6 9.011668712391728 23.290358108590024 2009-Mar-01 22:48:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000184 2009-Mar-01 22:48:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:48:10 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-01 22:48:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:48:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:48:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.139 (still bad) 2009-Mar-01 22:48:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:48:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10091.00 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:48:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.134 (still bad) 2009-Mar-01 22:48:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Mar-01 22:48:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Mar-01 22:48:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.134 (still bad) 2009-Mar-01 22:48:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Mar-01 22:48:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:48:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:48:21 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-01 22:48:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:48:21 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-01 22:48:21 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-01 22:48:21 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:48:21 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-01 22:48:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:48:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:48:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:48:21 LOG2 antvel: Parameters to Doppler: Topocentric 96501 2009 60 0.0 2009-Mar-01 22:48:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:48:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-01 22:48:21 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-01 22:48:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:48:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:48:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:48:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-01 22:48:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:48:21 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-01 22:48:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:48:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.024418 2009.1668726709256 18.999933 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666665177 23.359999999999989 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 1 9.017886583135370 23.255218365514029 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 2 9.022890619988583 23.324285492122375 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 3 9.021761756158259 23.429302367986910 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 4 9.015391534491323 23.464720192575371 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 5 9.010351653633629 23.394162232351178 2009-Mar-01 22:48:21 LOG4 log_alfabeam: ALFABEAM 6 9.011717407447490 23.289701604929586 2009-Mar-01 22:48:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000185 2009-Mar-01 22:48:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:48:22 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-01 22:48:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:48:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:48:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:48:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10103.00 2009-Mar-01 22:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 22:48:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:48:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 22:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 22:48:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:48:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:48:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:48:33 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-01 22:48:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:48:33 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-01 22:48:33 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-01 22:48:33 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:48:33 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-01 22:48:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:48:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:48:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:48:33 LOG2 antvel: Parameters to Doppler: Topocentric 96513 2009 60 0.0 2009-Mar-01 22:48:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:48:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-01 22:48:33 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-01 22:48:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:48:33 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:48:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:48:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-01 22:48:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:48:33 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-01 22:48:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:48:33 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.027761 2009.1668730511826 18.999933 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 0 9.016666666667097 23.360000000000007 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 1 9.017959429210180 23.255384250095190 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 2 9.022915214974159 23.325108922835696 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 3 9.021713253712321 23.429971916775585 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 4 9.015318621162804 23.464547013933064 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 5 9.010328171720433 23.393326874286167 2009-Mar-01 22:48:33 LOG4 log_alfabeam: ALFABEAM 6 9.011766567837721 23.289051368890213 2009-Mar-01 22:48:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000186 2009-Mar-01 22:48:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:48:34 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-01 22:48:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:48:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:48:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:48:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10115.00 2009-Mar-01 22:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:48:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:48:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:48:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:48:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:48:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:48:45 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-01 22:48:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:48:45 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-01 22:48:45 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-01 22:48:45 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:48:45 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-01 22:48:45 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:48:45 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:48:45 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:48:45 LOG2 antvel: Parameters to Doppler: Topocentric 96525 2009 60 0.0 2009-Mar-01 22:48:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:48:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-01 22:48:45 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-01 22:48:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:48:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:48:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:48:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-01 22:48:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:48:45 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-01 22:48:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:48:45 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.031103 2009.1668734314396 18.999933 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 0 9.016666666667303 23.360000000000007 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 1 9.018032128874692 23.255559673535309 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 2 9.022939229944431 23.325935285755655 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 3 9.021664300704554 23.430634798731454 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 4 9.015245864674492 23.464364297605183 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 5 9.010305286127158 23.392488872147918 2009-Mar-01 22:48:45 LOG4 log_alfabeam: ALFABEAM 6 9.011816150928050 23.288407959537857 2009-Mar-01 22:48:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000187 2009-Mar-01 22:48:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:48:46 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-01 22:48:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:48:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:48:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:48:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10127.00 2009-Mar-01 22:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:48:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 22:48:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 22:48:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-01 22:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 22:48:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:48:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:48:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:48:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:48:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:48:57 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-01 22:48:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:48:57 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-01 22:48:57 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-01 22:48:57 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:48:57 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-01 22:48:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:48:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:48:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:48:57 LOG2 antvel: Parameters to Doppler: Topocentric 96537 2009 60 0.0 2009-Mar-01 22:48:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:48:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-01 22:48:57 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-01 22:48:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:48:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:48:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:48:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-01 22:48:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:48:57 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-01 22:48:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:48:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.034446 2009.1668738116966 18.999933 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666788 23.360000000000007 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 1 9.018104706350469 23.255744689176925 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 2 9.022962673073749 23.326764854826141 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 3 9.021614881073059 23.431291235246263 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 4 9.015173240787870 23.464171989783114 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 5 9.010282988741393 23.391647951070812 2009-Mar-01 22:48:57 LOG4 log_alfabeam: ALFABEAM 6 9.011866172827760 23.287771156624519 2009-Mar-01 22:48:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000188 2009-Mar-01 22:48:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:48:58 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-01 22:48:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:48:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-01 22:48:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:48:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:48:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:48:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10139.00 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:49:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-01 22:49:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:49:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 0.898 1.042 1.051 2009-Mar-01 22:49:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.953 1.078 1.101 2009-Mar-01 22:49:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.981 0.989 1.000 2009-Mar-01 22:49:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.109 1.027 0.118 2009-Mar-01 22:49:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-01 22:49:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:49:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-01 22:49:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:49:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:49:09 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-01 22:49:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:49:09 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-01 22:49:09 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-01 22:49:09 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:49:09 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-01 22:49:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:49:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:49:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:49:09 LOG2 antvel: Parameters to Doppler: Topocentric 96549 2009 60 0.0 2009-Mar-01 22:49:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:49:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-01 22:49:09 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-01 22:49:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:49:09 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:49:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:49:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-01 22:49:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:49:09 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-01 22:49:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:49:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.037788 2009.1668741919536 18.999933 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666667069 23.360000000000007 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 1 9.018177099063339 23.255939127230661 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 2 9.022985524597480 23.327596911068113 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 3 9.021565037979848 23.431940663740725 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 4 9.015100812121016 23.463970268507950 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 5 9.010261298010812 23.390804842550239 2009-Mar-01 22:49:09 LOG4 log_alfabeam: ALFABEAM 6 9.011916589736183 23.287141500325454 2009-Mar-01 22:49:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000189 2009-Mar-01 22:49:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:49:10 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-01 22:49:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:49:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:49:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-01 22:49:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:49:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10151.00 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-Mar-01 22:49:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-01 22:49:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-01 22:49:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-01 22:49:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-01 22:49:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:49:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:49:21 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-01 22:49:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:49:21 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-01 22:49:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-01 22:49:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-01 22:49:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-01 22:49:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:49:21 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-01 22:49:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:49:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-01 22:49:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:49:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:49:21 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-01 22:49:21 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-01 22:49:21 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:49:21 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-01 22:49:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:49:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:49:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:49:21 LOG2 antvel: Parameters to Doppler: Topocentric 96561 2009 60 0.0 2009-Mar-01 22:49:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:49:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-01 22:49:21 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-01 22:49:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:49:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:49:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:49:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-01 22:49:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:49:21 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-01 22:49:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:49:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.041130 2009.1668745722109 18.999933 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666971 23.360000000000007 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 1 9.018249309751582 23.256142975142176 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 2 9.023007786348728 23.328431477703994 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 3 9.021514770619152 23.432583117361819 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 4 9.015028575919269 23.463759148025705 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 5 9.010240211797257 23.389959525321604 2009-Mar-01 22:49:21 LOG4 log_alfabeam: ALFABEAM 6 9.011967402382075 23.286518952555298 2009-Mar-01 22:49:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000190 2009-Mar-01 22:49:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:49:22 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-01 22:49:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:49:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:49:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:49:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10163.00 2009-Mar-01 22:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.605 (still bad) 2009-Mar-01 22:49:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.603 (still bad) 2009-Mar-01 22:49:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.604 (still bad) 2009-Mar-01 22:49:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.605 (still bad) 2009-Mar-01 22:49:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.603 (still bad) 2009-Mar-01 22:49:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:49:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:49:33 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-01 22:49:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:49:33 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-01 22:49:33 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-01 22:49:33 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:49:33 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-01 22:49:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:49:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16687 J 2009-Mar-01 22:49:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:49:33 LOG2 antvel: Parameters to Doppler: Topocentric 96573 2009 60 0.0 2009-Mar-01 22:49:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:49:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-01 22:49:33 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-01 22:49:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:49:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:49:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:49:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-01 22:49:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:49:33 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-01 22:49:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:49:33 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.044473 2009.1668749524679 18.999933 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666840 23.360000000000021 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 1 9.018321341116899 23.256356224335796 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 2 9.023029459927368 23.329268579385985 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 3 9.021464077990043 23.433218626712598 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 4 9.014956529470824 23.463538638594983 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 5 9.010219728200783 23.389111976716983 2009-Mar-01 22:49:33 LOG4 log_alfabeam: ALFABEAM 6 9.012018611688163 23.285903477818383 2009-Mar-01 22:49:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000191 2009-Mar-01 22:49:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:49:34 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-01 22:49:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:49:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:49:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:49:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10175.00 2009-Mar-01 22:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.601 (still bad) 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-01 22:49:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.591 (still bad) 2009-Mar-01 22:49:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.592 (still bad) 2009-Mar-01 22:49:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-01 22:49:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.592 (still bad) 2009-Mar-01 22:49:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:49:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:49:45 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-01 22:49:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:49:45 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-01 22:49:45 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-01 22:49:45 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:49:45 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-01 22:49:45 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:49:45 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:49:45 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:49:45 LOG2 antvel: Parameters to Doppler: Topocentric 96585 2009 60 0.0 2009-Mar-01 22:49:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:49:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-01 22:49:45 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-01 22:49:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:49:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:49:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:49:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-01 22:49:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:49:45 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-01 22:49:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:49:45 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.047815 2009.1668753327249 18.999933 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666643 23.360000000000003 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 1 9.018393131450411 23.256578666300683 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 2 9.023050528048117 23.330107487908482 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 3 9.021413004937962 23.433846659129706 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 4 9.014884734473245 23.463308956895119 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 5 9.010199863121802 23.388262935913517 2009-Mar-01 22:49:45 LOG4 log_alfabeam: ALFABEAM 6 9.012070172304087 23.285295585792166 2009-Mar-01 22:49:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000192 2009-Mar-01 22:49:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:49:46 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-01 22:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:49:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:49:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:49:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10187.00 2009-Mar-01 22:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.590 (still bad) 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:49:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.587 (still bad) 2009-Mar-01 22:49:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.586 (still bad) 2009-Mar-01 22:49:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.586 (still bad) 2009-Mar-01 22:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.587 (still bad) 2009-Mar-01 22:49:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:49:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:49:57 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-01 22:49:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:49:57 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-01 22:49:57 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-01 22:49:57 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:49:57 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-01 22:49:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:49:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:49:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:49:57 LOG2 antvel: Parameters to Doppler: Topocentric 96597 2009 60 0.0 2009-Mar-01 22:49:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:49:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-01 22:49:57 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-01 22:49:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:49:57 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:49:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:49:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-01 22:49:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:49:57 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-01 22:49:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:49:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.051158 2009.1668757129819 18.999933 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666707 23.360000000000007 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 1 9.018464705321366 23.256810346170205 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 2 9.023070999481952 23.330948476860854 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 3 9.021361535692366 23.434467444109750 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 4 9.014813166325336 23.463070057252068 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 5 9.010180607826522 23.387412127632665 2009-Mar-01 22:49:57 LOG4 log_alfabeam: ALFABEAM 6 9.012122100127996 23.284695047954354 2009-Mar-01 22:49:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000193 2009-Mar-01 22:49:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:49:58 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-01 22:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.584 (still bad) 2009-Mar-01 22:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:49:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:49:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:49:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:49:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10199.00 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.584 (still bad) 2009-Mar-01 22:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.571 (still bad) 2009-Mar-01 22:50:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:50:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.403 1.252 1.459 1.463 2009-Mar-01 22:50:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.425 1.344 1.546 1.544 2009-Mar-01 22:50:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.572 1.397 1.443 1.371 2009-Mar-01 22:50:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.338 0.109 1.479 0.119 2009-Mar-01 22:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.580 (still bad) 2009-Mar-01 22:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.569 (still bad) 2009-Mar-01 22:50:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:50:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:50:09 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-01 22:50:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:50:09 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-01 22:50:09 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-01 22:50:09 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:50:09 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-01 22:50:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:50:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:50:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:50:09 LOG2 antvel: Parameters to Doppler: Topocentric 96609 2009 60 0.0 2009-Mar-01 22:50:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:50:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-01 22:50:09 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-01 22:50:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:50:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:50:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:50:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-01 22:50:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:50:09 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-01 22:50:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:50:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.054500 2009.1668760932389 18.999933 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666710 23.360000000000003 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 1 9.018536001773173 23.257051030522142 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 2 9.023090858629100 23.331790814094227 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 3 9.021309716081882 23.435080470307508 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 4 9.014741885937759 23.462822181156362 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 5 9.010161976492643 23.386560293915188 2009-Mar-01 22:50:09 LOG4 log_alfabeam: ALFABEAM 6 9.012174348923590 23.284102352408190 2009-Mar-01 22:50:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000194 2009-Mar-01 22:50:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:50:10 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-01 22:50:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:50:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:50:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.567 (still bad) 2009-Mar-01 22:50:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:50:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10211.00 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.567 (still bad) 2009-Mar-01 22:50:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.539 (still bad) 2009-Mar-01 22:50:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.543 (still bad) 2009-Mar-01 22:50:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.551 (still bad) 2009-Mar-01 22:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.540 (still bad) 2009-Mar-01 22:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:50:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:50:21 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-01 22:50:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:50:21 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-01 22:50:21 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-01 22:50:21 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:50:21 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-01 22:50:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:50:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:50:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:50:21 LOG2 antvel: Parameters to Doppler: Topocentric 96621 2009 60 0.0 2009-Mar-01 22:50:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:50:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-01 22:50:21 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-01 22:50:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:50:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:50:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:50:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-01 22:50:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:50:21 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-01 22:50:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:50:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.057843 2009.1668764734961 18.999933 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666607 23.360000000000014 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 1 9.018607045603300 23.257300761838319 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 2 9.023110114506473 23.332634774246294 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 3 9.021257530365331 23.435685971065016 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 4 9.014670868470331 23.462565285525237 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 5 9.010143960134396 23.385707158099322 2009-Mar-01 22:50:21 LOG4 log_alfabeam: ALFABEAM 6 9.012226934586755 23.283517266810556 2009-Mar-01 22:50:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000195 2009-Mar-01 22:50:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:50:22 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-01 22:50:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:50:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:50:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:50:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10223.00 2009-Mar-01 22:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.542 (still bad) 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.537 (still bad) 2009-Mar-01 22:50:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.537 (still bad) 2009-Mar-01 22:50:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.536 (still bad) 2009-Mar-01 22:50:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.535 (still bad) 2009-Mar-01 22:50:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.535 (still bad) 2009-Mar-01 22:50:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:50:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:50:33 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-01 22:50:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:50:33 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-01 22:50:33 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-01 22:50:33 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:50:33 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-01 22:50:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:50:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:50:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:50:33 LOG2 antvel: Parameters to Doppler: Topocentric 96633 2009 60 0.0 2009-Mar-01 22:50:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:50:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-01 22:50:33 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-01 22:50:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:50:33 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:50:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:50:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-01 22:50:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:50:33 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-01 22:50:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:50:33 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.061185 2009.1668768537531 18.999933 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666758 23.360000000000014 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 1 9.018677776741745 23.257559282683221 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 2 9.023128753214140 23.333479623000233 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 3 9.021205025233828 23.436283457283508 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 4 9.014600173915033 23.462299635727920 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 5 9.010126571200292 23.384853463285257 2009-Mar-01 22:50:33 LOG4 log_alfabeam: ALFABEAM 6 9.012279810118253 23.282940256868567 2009-Mar-01 22:50:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000196 2009-Mar-01 22:50:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:50:34 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-01 22:50:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:50:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:50:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:50:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10235.00 2009-Mar-01 22:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.535 (still bad) 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.530 (still bad) 2009-Mar-01 22:50:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.530 (still bad) 2009-Mar-01 22:50:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.537 (still bad) 2009-Mar-01 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.536 (still bad) 2009-Mar-01 22:50:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.528 (still bad) 2009-Mar-01 22:50:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:50:45 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-01 22:50:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:50:45 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-01 22:50:45 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Mar-01 22:50:45 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-01 22:50:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-01 22:50:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 22:50:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 22:50:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:50:45 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-01 22:50:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:50:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:50:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:50:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:50:45 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-01 22:50:45 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-01 22:50:45 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Mar-01 22:50:45 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:50:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-01 22:50:45 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:50:45 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:50:45 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:50:45 LOG2 antvel: Parameters to Doppler: Topocentric 96645 2009 60 0.0 2009-Mar-01 22:50:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:50:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-01 22:50:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-01 22:50:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:50:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:50:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:50:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Mar-01 22:50:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:50:45 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-01 22:50:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:50:46 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.064528 2009.1668772340101 18.999933 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666792 23.360000000000007 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 1 9.018748220259154 23.257826633369845 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 2 9.023146784010986 23.334325636716024 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 3 9.021152184925178 23.436873166364148 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 4 9.014529777149793 23.462025190774629 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 5 9.010109800461514 23.383998930747733 2009-Mar-01 22:50:46 LOG4 log_alfabeam: ALFABEAM 6 9.012332991462904 23.282371086257626 2009-Mar-01 22:50:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000197 2009-Mar-01 22:50:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:50:46 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-01 22:50:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:50:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:50:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Mar-01 22:50:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10247.00 2009-Mar-01 22:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.528 (still bad) 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-Mar-01 22:50:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.138 (still bad) 2009-Mar-01 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.147 (still bad) 2009-Mar-01 22:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-Mar-01 22:50:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:50:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:50:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:50:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:50:57 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-01 22:50:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:50:57 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-01 22:50:57 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Mar-01 22:50:57 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:50:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-01 22:50:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:50:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:50:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:50:57 LOG2 antvel: Parameters to Doppler: Topocentric 96657 2009 60 0.0 2009-Mar-01 22:50:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:50:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-01 22:50:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-01 22:50:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:50:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:50:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:50:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Mar-01 22:50:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:50:57 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-01 22:50:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:50:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.067870 2009.1668776142672 18.999933 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666755 23.360000000000017 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 1 9.018818317096851 23.258102533484433 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 2 9.023164194699627 23.335172080671683 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 3 9.021099056866515 23.437454632229365 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 4 9.014459737122113 23.461742238845755 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 5 9.010093658639867 23.383144302864082 2009-Mar-01 22:50:57 LOG4 log_alfabeam: ALFABEAM 6 9.012386430982362 23.281810197619432 2009-Mar-01 22:50:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000198 2009-Mar-01 22:50:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:50:58 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-01 22:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-Mar-01 22:50:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:50:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:50:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:50:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Mar-01 22:50:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10259.00 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Mar-01 22:51:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 22:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:51:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.924 1.079 1.074 2009-Mar-01 22:51:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.973 1.122 1.122 2009-Mar-01 22:51:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.994 1.043 1.032 2009-Mar-01 22:51:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.109 1.047 0.119 2009-Mar-01 22:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 22:51:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:51:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:51:09 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-01 22:51:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:51:09 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-01 22:51:09 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Mar-01 22:51:09 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:51:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-01 22:51:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:51:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:51:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:51:09 LOG2 antvel: Parameters to Doppler: Topocentric 96669 2009 60 0.0 2009-Mar-01 22:51:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:51:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-01 22:51:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-01 22:51:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:51:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:51:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:51:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Mar-01 22:51:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:51:09 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-01 22:51:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:51:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.071213 2009.1668779945242 18.999933 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666708 23.360000000000003 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 1 9.018888092637992 23.258387021722310 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 2 9.023180994770302 23.336019233602737 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 3 9.021045625223147 23.438028096460620 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 4 9.014390028389617 23.461450740478483 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 5 9.010078136278320 23.382289298191576 2009-Mar-01 22:51:09 LOG4 log_alfabeam: ALFABEAM 6 9.012440144721646 23.281257350577860 2009-Mar-01 22:51:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000199 2009-Mar-01 22:51:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:51:10 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-01 22:51:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:51:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:51:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:51:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Mar-01 22:51:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10271.00 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:51:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 22:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 22:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 22:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:51:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 22:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:51:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:51:21 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-01 22:51:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:51:21 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-01 22:51:21 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Mar-01 22:51:21 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:51:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-01 22:51:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:51:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:51:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:51:21 LOG2 antvel: Parameters to Doppler: Topocentric 96681 2009 60 0.0 2009-Mar-01 22:51:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:51:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-01 22:51:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-01 22:51:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:51:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:51:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:51:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Mar-01 22:51:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:51:21 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-01 22:51:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:51:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.074555 2009.1668783747814 18.999933 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666689 23.360000000000007 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 1 9.018957488952701 23.258679795849549 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 2 9.023197173721110 23.336866362114467 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 3 9.020991938030955 23.438593116618186 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 4 9.014320708739852 23.461151005476076 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 5 9.010063242386256 23.381434656642892 2009-Mar-01 22:51:21 LOG4 log_alfabeam: ALFABEAM 6 9.012494084530598 23.280712964196336 2009-Mar-01 22:51:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000200 2009-Mar-01 22:51:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:51:22 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-01 22:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:51:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:51:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Mar-01 22:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 22:51:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10283.00 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:51:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:51:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:51:33 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-01 22:51:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:51:33 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-01 22:51:33 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Mar-01 22:51:33 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:51:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-01 22:51:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:51:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:51:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:51:33 LOG2 antvel: Parameters to Doppler: Topocentric 96693 2009 60 0.0 2009-Mar-01 22:51:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:51:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-01 22:51:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-01 22:51:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:51:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:51:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:51:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Mar-01 22:51:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:51:33 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-01 22:51:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:51:33 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.077897 2009.1668787550384 18.999933 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666699 23.360000000000007 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 1 9.019026511174159 23.258980802267864 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 2 9.023212736691878 23.337713494480706 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 3 9.020937995507953 23.439149773188177 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 4 9.014251772946066 23.460843088625982 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 5 9.010048971475872 23.380580348997185 2009-Mar-01 22:51:33 LOG4 log_alfabeam: ALFABEAM 6 9.012548250364611 23.280176953193621 2009-Mar-01 22:51:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000201 2009-Mar-01 22:51:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:51:34 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-01 22:51:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:51:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:51:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Mar-01 22:51:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10295.00 2009-Mar-01 22:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 22:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Mar-01 22:51:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-Mar-01 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-01 22:51:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-01 22:51:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:51:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:51:45 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-01 22:51:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:51:45 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-01 22:51:45 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Mar-01 22:51:45 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:51:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-01 22:51:45 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:51:45 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:51:45 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:51:45 LOG2 antvel: Parameters to Doppler: Topocentric 96705 2009 60 0.0 2009-Mar-01 22:51:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:51:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-01 22:51:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-01 22:51:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:51:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:51:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:51:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Mar-01 22:51:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:51:45 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-01 22:51:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:51:45 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.081240 2009.1668791352954 18.999933 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666717 23.360000000000014 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 1 9.019095164394853 23.259289992045915 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 2 9.023227688552678 23.338560660696327 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 3 9.020883797637675 23.439698143736347 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 4 9.014183215824941 23.460527040023472 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 5 9.010035318337165 23.379726344350740 2009-Mar-01 22:51:45 LOG4 log_alfabeam: ALFABEAM 6 9.012602642407826 23.279649235322243 2009-Mar-01 22:51:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000202 2009-Mar-01 22:51:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:51:46 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-01 22:51:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:51:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:51:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Mar-01 22:51:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10307.00 2009-Mar-01 22:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-Mar-01 22:51:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Mar-01 22:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-Mar-01 22:51:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-01 22:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:51:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:51:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:51:57 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-01 22:51:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:51:57 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-01 22:51:57 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Mar-01 22:51:57 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:51:57 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-01 22:51:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:51:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:51:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:51:57 LOG2 antvel: Parameters to Doppler: Topocentric 96717 2009 60 0.0 2009-Mar-01 22:51:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:51:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-01 22:51:57 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-01 22:51:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:51:57 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:51:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:51:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Mar-01 22:51:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:51:57 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-01 22:51:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:51:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.084582 2009.1668795155524 18.999933 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666701 23.360000000000003 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 1 9.019163392576010 23.259607032623496 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 2 9.023242021309041 23.339407132498756 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 3 9.020829393127819 23.440237822084690 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 4 9.014115093228021 23.460203199449563 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 5 9.010022289460007 23.378873375780294 2009-Mar-01 22:51:57 LOG4 log_alfabeam: ALFABEAM 6 9.012657211979752 23.279130193659622 2009-Mar-01 22:51:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000203 2009-Mar-01 22:51:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:51:58 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-01 22:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-Mar-01 22:51:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:51:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:51:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:51:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Mar-01 22:51:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10319.00 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-Mar-01 22:52:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-Mar-01 22:52:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-Mar-01 22:52:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-Mar-01 22:52:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:52:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 0.901 1.040 1.051 2009-Mar-01 22:52:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.952 1.073 1.095 2009-Mar-01 22:52:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.973 0.982 0.999 2009-Mar-01 22:52:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.109 1.029 0.119 2009-Mar-01 22:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:52:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:52:09 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-01 22:52:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:52:09 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-01 22:52:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-01 22:52:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-01 22:52:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-01 22:52:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:52:09 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-01 22:52:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:52:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-01 22:52:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:52:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:52:09 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-01 22:52:09 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Mar-01 22:52:09 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:52:09 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Mar-01 22:52:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:52:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:52:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:52:09 LOG2 antvel: Parameters to Doppler: Topocentric 96729 2009 60 0.0 2009-Mar-01 22:52:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:52:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Mar-01 22:52:09 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Mar-01 22:52:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:52:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:52:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:52:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Mar-01 22:52:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:52:09 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-01 22:52:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:52:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.087925 2009.1668798958094 18.999933 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666689 23.360000000000017 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 1 9.019231222012609 23.259931961418271 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 2 9.023255744943240 23.340253197186708 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 3 9.020774765736222 23.440769060185048 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 4 9.014047378785335 23.459871528441493 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 5 9.010009874916735 23.378021152462910 2009-Mar-01 22:52:09 LOG4 log_alfabeam: ALFABEAM 6 9.012711975592747 23.278619577988426 2009-Mar-01 22:52:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000204 2009-Mar-01 22:52:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:52:10 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-01 22:52:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:52:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Mar-01 22:52:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-Mar-01 22:52:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10331.00 2009-Mar-01 22:52:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:52:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-Mar-01 22:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.599 (still bad) 2009-Mar-01 22:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.599 (still bad) 2009-Mar-01 22:52:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.601 (still bad) 2009-Mar-01 22:52:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.601 (still bad) 2009-Mar-01 22:52:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:52:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:52:21 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-01 22:52:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:52:21 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-01 22:52:21 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Mar-01 22:52:21 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:52:21 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Mar-01 22:52:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:52:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:52:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:52:21 LOG2 antvel: Parameters to Doppler: Topocentric 96741 2009 60 0.0 2009-Mar-01 22:52:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:52:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Mar-01 22:52:21 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Mar-01 22:52:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:52:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:52:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:52:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Mar-01 22:52:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:52:21 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-01 22:52:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:52:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.091267 2009.1668802760666 18.999933 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666703 23.360000000000003 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 1 9.019298598043761 23.260264427380967 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 2 9.023268853094736 23.341098131917864 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 3 9.020719964459071 23.441291476341782 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 4 9.013980126943050 23.459532385006838 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 5 9.009998079563633 23.377170400934279 2009-Mar-01 22:52:21 LOG4 log_alfabeam: ALFABEAM 6 9.012766884368819 23.278117747205268 2009-Mar-01 22:52:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000205 2009-Mar-01 22:52:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:52:22 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-01 22:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:52:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Mar-01 22:52:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Mar-01 22:52:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10343.00 2009-Mar-01 22:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.601 (still bad) 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.586 (still bad) 2009-Mar-01 22:52:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-01 22:52:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.593 (still bad) 2009-Mar-01 22:52:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.588 (still bad) 2009-Mar-01 22:52:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.589 (still bad) 2009-Mar-01 22:52:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:52:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:52:33 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-01 22:52:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:52:33 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-01 22:52:33 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Mar-01 22:52:33 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:52:33 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Mar-01 22:52:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:52:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:52:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:52:33 LOG2 antvel: Parameters to Doppler: Topocentric 96753 2009 60 0.0 2009-Mar-01 22:52:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:52:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Mar-01 22:52:33 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Mar-01 22:52:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:52:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:52:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:52:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Mar-01 22:52:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:52:33 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-01 22:52:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:52:33 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.094610 2009.1668806563237 18.999933 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666682 23.359999999999999 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 1 9.019365547364449 23.260604468623495 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 2 9.023281355894969 23.341942228337061 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 3 9.020664972804509 23.441805326385349 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 4 9.013913310926787 23.459185729861716 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 5 9.009986893338109 23.376320825728065 2009-Mar-01 22:52:33 LOG4 log_alfabeam: ALFABEAM 6 9.012821955090006 23.277624447498795 2009-Mar-01 22:52:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000206 2009-Mar-01 22:52:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:52:34 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-01 22:52:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:52:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Mar-01 22:52:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Mar-01 22:52:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10355.00 2009-Mar-01 22:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.589 (still bad) 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.583 (still bad) 2009-Mar-01 22:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.582 (still bad) 2009-Mar-01 22:52:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.585 (still bad) 2009-Mar-01 22:52:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.584 (still bad) 2009-Mar-01 22:52:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.581 (still bad) 2009-Mar-01 22:52:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:52:45 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-01 22:52:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:52:45 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-01 22:52:45 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Mar-01 22:52:45 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:52:45 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Mar-01 22:52:45 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:52:45 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:52:45 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:52:45 LOG2 antvel: Parameters to Doppler: Topocentric 96765 2009 60 0.0 2009-Mar-01 22:52:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:52:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Mar-01 22:52:45 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Mar-01 22:52:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:52:45 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:52:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:52:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Mar-01 22:52:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:52:45 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-01 22:52:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:52:45 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.097952 2009.1668810365807 18.999933 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666696 23.360000000000014 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 1 9.019432016772026 23.260951717070430 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 2 9.023293248576634 23.342784770527128 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 3 9.020609839931820 23.442310253167644 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 4 9.013846983698572 23.458831937756418 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 5 9.009976319509818 23.375473145355908 2009-Mar-01 22:52:45 LOG4 log_alfabeam: ALFABEAM 6 9.012877138802287 23.277140013606850 2009-Mar-01 22:52:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000207 2009-Mar-01 22:52:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:52:46 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-01 22:52:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:52:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Mar-01 22:52:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Mar-01 22:52:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10367.00 2009-Mar-01 22:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.581 (still bad) 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.567 (still bad) 2009-Mar-01 22:52:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:52:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.564 (still bad) 2009-Mar-01 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.568 (still bad) 2009-Mar-01 22:52:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.567 (still bad) 2009-Mar-01 22:52:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:52:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:52:57 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-01 22:52:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:52:57 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-01 22:52:57 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Mar-01 22:52:57 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:52:57 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Mar-01 22:52:57 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:52:57 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:52:57 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:52:57 LOG2 antvel: Parameters to Doppler: Topocentric 96777 2009 60 0.0 2009-Mar-01 22:52:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:52:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Mar-01 22:52:57 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Mar-01 22:52:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:52:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:52:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:52:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Mar-01 22:52:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:52:57 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-01 22:52:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:52:57 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.101295 2009.1668814168377 18.999933 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666723 23.360000000000007 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 1 9.019498033370974 23.261306212248051 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 2 9.023304541386565 23.343626054914708 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 3 9.020554549054186 23.442806516116143 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 4 9.013781118071186 23.458470967859839 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 5 9.009966347917652 23.374627059296575 2009-Mar-01 22:52:57 LOG4 log_alfabeam: ALFABEAM 6 9.012932452600408 23.276664188440346 2009-Mar-01 22:52:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000208 2009-Mar-01 22:52:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:52:58 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-01 22:52:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.566 (still bad) 2009-Mar-01 22:52:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:52:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Mar-01 22:52:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:52:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Mar-01 22:52:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10379.00 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.566 (still bad) 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:53:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.538 (still bad) 2009-Mar-01 22:53:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.538 (still bad) 2009-Mar-01 22:53:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.539 (still bad) 2009-Mar-01 22:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.539 (still bad) 2009-Mar-01 22:53:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:53:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:53:09 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-01 22:53:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:53:09 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-01 22:53:09 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Mar-01 22:53:09 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:53:09 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Mar-01 22:53:09 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:53:09 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:53:09 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:53:09 LOG2 antvel: Parameters to Doppler: Topocentric 96789 2009 60 0.0 2009-Mar-01 22:53:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:53:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Mar-01 22:53:09 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Mar-01 22:53:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:53:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:53:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:53:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Mar-01 22:53:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:53:09 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-01 22:53:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:53:09 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.104637 2009.1668817970949 18.999933 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666710 23.360000000000007 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 1 9.019563545486136 23.261667570566146 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 2 9.023315231102224 23.344465373918908 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 3 9.020499149372020 23.443293782547844 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 4 9.013715765455377 23.458103210136038 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 5 9.009956980299453 23.373783276656450 2009-Mar-01 22:53:09 LOG4 log_alfabeam: ALFABEAM 6 9.012987847571953 23.276197282741499 2009-Mar-01 22:53:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000209 2009-Mar-01 22:53:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:53:10 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-01 22:53:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:53:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Mar-01 22:53:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:53:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.378 1.240 1.439 1.449 2009-Mar-01 22:53:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.418 1.333 1.511 1.523 2009-Mar-01 22:53:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.538 1.379 1.401 1.349 2009-Mar-01 22:53:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.328 0.109 1.468 0.119 2009-Mar-01 22:53:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Mar-01 22:53:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10391.00 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:53:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.538 (still bad) 2009-Mar-01 22:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.528 (still bad) 2009-Mar-01 22:53:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.531 (still bad) 2009-Mar-01 22:53:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.535 (still bad) 2009-Mar-01 22:53:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:53:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.530 (still bad) 2009-Mar-01 22:53:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:53:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:53:21 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-01 22:53:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:53:21 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-01 22:53:21 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Mar-01 22:53:21 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:53:21 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Mar-01 22:53:21 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:53:21 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:53:21 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:53:21 LOG2 antvel: Parameters to Doppler: Topocentric 96801 2009 60 0.0 2009-Mar-01 22:53:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:53:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Mar-01 22:53:21 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Mar-01 22:53:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:53:21 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:53:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:53:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Mar-01 22:53:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-01 22:53:21 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-01 22:53:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:53:21 LOG5 log_alfabeam: Parameters: 9.0166666666666675 23.360000000000003 9.107980 2009.1668821773519 18.999933 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 0 9.016666666666692 23.360000000000007 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 1 9.019628580634206 23.262035833689708 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 2 9.023325328048671 23.345303029115041 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 3 9.020443623761270 23.443772315129070 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 4 9.013650898249674 23.457728621478712 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 5 9.009948206435539 23.372941491521026 2009-Mar-01 22:53:21 LOG4 log_alfabeam: ALFABEAM 6 9.013043341163391 23.275739036531220 2009-Mar-01 22:53:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 906000210 2009-Mar-01 22:53:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-01 22:53:22 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-01 22:53:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:53:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Mar-01 22:53:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Mar-01 22:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.533 (still bad) 2009-Mar-01 22:53:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10403.00 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:53:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.533 (still bad) 2009-Mar-01 22:53:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.525 (still bad) 2009-Mar-01 22:53:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:53:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.525 (still bad) 2009-Mar-01 22:53:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:53:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.529 (still bad) 2009-Mar-01 22:53:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.529 (still bad) 2009-Mar-01 22:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:53:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:53:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 22:53:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-01 22:53:33 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-01 22:53:33 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 INFO2 smartfreq: Switching off CAL 2009-Mar-01 22:53:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 22:53:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 22:53:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:53:33 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:53:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:53:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:53:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:53:33 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 INFO3 restore_frequencies: Restoring original frequencies 2009-Mar-01 22:53:33 LOG5 antvel: Calling 'antvel 90100.000000 232136.000000 J Topocentric 0' 2009-Mar-01 22:53:33 LOG2 antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:53:33 LOG2 antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:53:33 LOG2 antvel: Parameters to Doppler: Topocentric 96813 2009 60 0.0 2009-Mar-01 22:53:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:53:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-01 22:53:33 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-01 22:53:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:53:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:53:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:53:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:33 STOP finish_task: Finishing task 'smart frequency switching' 2009-Mar-01 22:53:33 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Mar-01 22:53:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:53:33 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Mar-01 22:53:33 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-01 22:53:33 NOTE run_command_file: DONE with command file processing 2009-Mar-01 22:53:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-01 22:53:34 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Mar-01 22:53:34 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-01 22:53:34 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Mar-01 22:53:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:53:34 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Mar-01 22:53:34 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-01 22:53:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:53:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.526 (still bad) 2009-Mar-01 22:53:42 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Mar-01 22:53:42 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Mar-01 22:53:42 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Mar-01 22:53:42 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Mar-01 22:53:42 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-01 22:53:42 NOTE restart_wapp: Restarting all WAPPs 2009-Mar-01 22:53:42 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Mar-01 22:53:42 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Mar-01 22:53:42 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-01 22:53:42 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-01 22:53:42 LOG3 exec_msg: Closing socket 2009-Mar-01 22:53:42 LOG3 exec_msg: Closing socket 2009-Mar-01 22:53:42 LOG3 exec_msg: Closing socket 2009-Mar-01 22:53:42 LOG3 exec_msg: Closing socket 2009-Mar-01 22:53:45 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Mar-01 22:53:45 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Mar-01 22:53:45 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Mar-01 22:53:45 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Mar-01 22:53:55 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Mar-01 22:53:55 LOG2 CIMA-antvel: Precessing RA = 09:01:00.0 Dec = +23:21:36.0 Epoch = 2009.16688 J 2009-Mar-01 22:53:55 LOG2 CIMA-antvel: Computed apparent RA = 09:01:34.3 Dec = +23:19:21.7 2009-Mar-01 22:53:55 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96835 2009 60 0.0 2009-Mar-01 22:53:55 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-01 22:53:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-01 22:53:57 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Mar-01 22:53:57 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Mar-01 22:53:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-01 22:53:57 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-01 22:53:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-01 22:53:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-01 22:53:57 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-01 22:53:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:53:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:53:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:53:57 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-01 22:53:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:53:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:53:58 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-01 22:53:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:53:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:53:58 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-01 22:53:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-01 22:53:58 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-01 22:53:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-01 22:53:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-01 22:53:58 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-01 22:53:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-01 22:53:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:53:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-01 22:53:58 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-01 22:53:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:53:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-01 22:53:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:53:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:53:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-01 22:53:59 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-01 22:53:59 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-01 22:53:59 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-01 22:53:59 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-01 22:53:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:53:59 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-01 22:53:59 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-01 22:53:59 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Mar-01 22:53:59 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Mar-01 22:53:59 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-01 22:53:59 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-01 22:53:59 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-01 22:53:59 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-01 22:53:59 START begin_task: Starting task 'selecting calibration port' 2009-Mar-01 22:53:59 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-01 22:53:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-01 22:53:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:53:59 START begin_task: Starting task 'waiting on calport' 2009-Mar-01 22:53:59 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-01 22:53:59 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:53:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:00 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:54:00 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-01 22:54:00 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-01 22:54:00 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-01 22:54:00 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 22:54:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 22:54:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:54:00 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:54:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:54:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:54:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:54:00 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:54:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:54:00 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-01 22:54:00 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-01 22:54:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 22:54:00 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-01 22:54:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-01 22:54:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 22:54:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 22:54:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 22:54:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 22:54:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 22:54:00 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-01 22:54:00 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-01 22:54:00 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-01 22:54:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:54:00 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-01 22:54:00 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-01 22:54:00 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Mar-01 22:54:00 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Mar-01 22:54:00 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:54:00 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-01 22:54:00 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-01 22:54:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-01 22:54:00 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:54:00 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-01 22:54:00 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-01 22:54:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:54:00 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-01 22:54:01 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-01 22:54:01 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Mar-01 22:54:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-01 22:54:01 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-01 22:54:22 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Mar-01 22:54:22 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Mar-01 22:54:22 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:54:22 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-01 22:54:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-01 22:54:22 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-01 22:54:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-01 22:54:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-01 22:54:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:54:22 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-01 22:54:22 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-01 22:54:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-01 22:54:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:54:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-01 22:54:25 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-01 22:54:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-01 22:54:25 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:54:25 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-01 22:54:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-01 22:54:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:54:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:54:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:54:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:54:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-01 22:54:25 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-01 22:54:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-01 22:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-01 22:54:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Mar-01 22:54:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-01 22:54:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-01 22:54:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-01 22:54:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-01 22:54:26 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-01 22:54:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.992 0.911 ALFA beam 1: 1.046 1.060 2009-Mar-01 22:54:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.962 ALFA beam 3: 1.070 1.084 2009-Mar-01 22:54:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 0.957 ALFA beam 5: 1.001 1.006 2009-Mar-01 22:54:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.917 0.106 ALFA beam 7: 1.020 0.116 2009-Mar-01 22:54:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:54:26 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-01 22:54:26 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Mar-01 22:54:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:54:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:54:26 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-01 22:54:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Mar-01 22:54:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:54:26 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-01 22:54:26 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-01 22:54:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-01 22:54:26 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:54:26 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-01 22:54:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Mar-01 22:54:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.911 1.046 1.060 2009-Mar-01 22:54:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.962 1.070 1.084 2009-Mar-01 22:54:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.957 1.001 1.006 2009-Mar-01 22:54:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.106 1.020 0.116 2009-Mar-01 22:54:30 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Mar-01 22:54:30 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift96p2 090900.0 +232136 J 0 Topocentric velocity(optical) 2009-Mar-01 22:54:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift96p2 090900.0 +232136 J 0 Topocentric velocity(optical)' 2009-Mar-01 22:54:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-01 22:54:30 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Mar-01 22:54:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-01 22:54:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift96p2} 2009-Mar-01 22:54:30 INFO5 fixed_driftmap: Start: year = 2009.1668843321418 RA = 09:09:34.2 Dec = +23:19:16.7 2009-Mar-01 22:54:30 NOTE fixed_driftmap: Setting ZA to 4:58:03.0 ... 2009-Mar-01 22:54:30 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.97 2009-Mar-01 22:54:30 LOG3 track_source: Calling 'track_source drift96p2 180.0 4.9674990461 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Mar-01 22:54:30 START begin_task: Starting task 'sending tracking commands' 2009-Mar-01 22:54:30 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift96p2} INFO {Slewing to source 'drift96p2' ...} 2009-Mar-01 22:54:30 INFO1 track_source: Starting to track drift96p2 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift96p2" 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: set dec 4.9674990461 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.9674990461 -CF 2009-Mar-01 22:54:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-01 22:54:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-01 22:54:30 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-01 22:54:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:54:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-01 22:54:30 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:54:30 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-01 22:54:30 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-01 22:54:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Mar-01 22:54:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-01 22:54:30 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-01 22:54:30 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift96p2" 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: set dec 4.9674990461 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: vw% 4.9674990461 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.9674990461 -CF 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-01 22:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:54:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-01 22:54:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-01 22:54:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-01 22:54:31 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-01 22:54:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:54:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-01 22:54:31 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-01 22:54:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-01 22:54:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:54:31 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-01 22:54:31 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-01 22:54:31 START begin_task: Starting task 'waiting on telescope' 2009-Mar-01 22:54:31 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-01 22:54:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-01 22:54:31 LOG3 waittrk: Start waittrk 5 2009-Mar-01 22:54:31 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-01 22:54:31 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-01 22:54:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-01 22:54:36 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-01 22:54:36 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-01 22:54:36 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-01 22:55:21 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:55:21 INFO2 waittrk: Now tracking drift96p2 2009-Mar-01 22:55:21 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 4.99 2009-Mar-01 22:55:21 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-01 22:55:21 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-01 22:55:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:55:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-01 22:55:21 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 START begin_task: Starting task 'selecting calibration type' 2009-Mar-01 22:55:21 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-01 22:55:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-01 22:55:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:55:21 START begin_task: Starting task 'waiting on setcal' 2009-Mar-01 22:55:21 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-01 22:55:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:55:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-01 22:55:21 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-01 22:55:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:55:21 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-01 22:55:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:55:21 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:55:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:55:21 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:55:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-01 22:55:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 22:55:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:55:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 22:55:21 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-01 22:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 22:55:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 22:55:21 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-01 22:55:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 22:55:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-01 22:55:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-01 22:55:22 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-01 22:55:22 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-01 22:55:22 INFO2 astwait: Waiting for 4 seconds from 02:55:22 to 02:55:26 UTC ... 2009-Mar-01 22:55:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 4 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-01 22:55:22 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-01 22:55:22 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-01 22:55:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-01 22:55:26 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-01 22:55:26 INFO3 astwait: Finished waiting 2009-Mar-01 22:55:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:55:26 LOG5 dopset_later: Calling 'dopset_later 60.919142093668761' 2009-Mar-01 22:55:26 INFO3 dopset_later: Setting Doppler correction for 22:56:26 (60.9 seconds from now) 2009-Mar-01 22:55:26 LOG5 antvel: Calling 'antvel 180.000000 4.967499 F Topocentric 60.919142093668761' 2009-Mar-01 22:55:26 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.97 to apparent RA = 09:09:34.0 Dec = +23:19:16.7 2009-Mar-01 22:55:26 LOG2 antvel: Parameters to Doppler: Topocentric 96986 2009 60 0.0 2009-Mar-01 22:55:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-01 22:55:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Mar-01 22:55:26 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Mar-01 22:55:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-01 22:55:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-01 22:55:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:55:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:55:26 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:55:26 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-01 22:55:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-01 22:55:26 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-01 22:55:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-01 22:55:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-01 22:55:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:55:26 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-01 22:55:26 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 22:55:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-01 22:55:27 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-01 22:55:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-01 22:55:27 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-01 22:55:27 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-01 22:55:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-01 22:55:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:55:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:55:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:55:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-01 22:55:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-01 22:55:27 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-01 22:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 22:55:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-01 22:55:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-01 22:55:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Mar-01 22:55:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Mar-01 22:55:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-01 22:55:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-01 22:55:28 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.989 0.908 ALFA beam 1: 1.049 1.062 2009-Mar-01 22:55:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.961 ALFA beam 3: 1.090 1.108 2009-Mar-01 22:55:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.093 0.981 ALFA beam 5: 1.005 1.008 2009-Mar-01 22:55:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.930 0.109 ALFA beam 7: 1.030 0.119 2009-Mar-01 22:55:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:55:28 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-01 22:55:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:55:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:55:28 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-01 22:55:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-01 22:55:28 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-01 22:55:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 22:55:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-01 22:55:28 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-01 22:55:28 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:09:34.2 LST = 09:08:36.1 diff = 58.1 secs 2009-Mar-01 22:55:28 INFO2 fixed_driftmap: Waiting 56.1 seconds for RA 9:09:34 2009-Mar-01 22:55:28 INFO2 lstwait: Waiting for 55.9 secs from LST 09:08:36 to LST 09:09:32 ... 2009-Mar-01 22:55:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.92322030550983 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-01 22:55:28 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-01 22:55:28 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-01 22:55:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:55:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.908 1.049 1.062 2009-Mar-01 22:55:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.961 1.090 1.108 2009-Mar-01 22:55:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.981 1.005 1.008 2009-Mar-01 22:55:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.109 1.030 0.119 2009-Mar-01 22:56:24 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-01 22:56:24 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-01 22:56:24 LOG4 lstwait: Finished waiting 0.08 seconds late 2009-Mar-01 22:56:24 INFO3 lstwait: Finished waiting 2009-Mar-01 22:56:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-01 22:56:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:56:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:56:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:56:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 22:56:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Mar-01 22:56:24 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-01 22:56:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-01 22:56:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-01 22:56:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-01 22:56:24 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-01 22:56:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-01 22:56:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-01 22:56:25 INFO2 take_data: Starting WAPP 600-second scan: 906000211 2009-Mar-01 22:56:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-01 22:56:25 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-01 22:56:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 22:56:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 22:56:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20090301.a2010.0033.fits 2009-Mar-01 22:56:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-01 22:56:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090301.a2010.0033.fits} 2009-Mar-01 22:56:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10586.00 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 22:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-01 22:56:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 22:56:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:56:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:56:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.916 1.057 1.068 2009-Mar-01 22:56:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.967 1.097 1.120 2009-Mar-01 22:56:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.998 1.013 1.018 2009-Mar-01 22:56:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.109 1.035 0.119 2009-Mar-01 22:56:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:56:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:56:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:56:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:56:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:56:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 22:56:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 22:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 22:56:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 22:56:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:56:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:56:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:56:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 22:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:57:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:57:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 22:57:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:57:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 22:57:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 22:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 22:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:57:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:57:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 22:57:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:57:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:57:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:57:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:57:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:57:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:57:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.909 1.049 1.062 2009-Mar-01 22:57:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.959 1.093 1.110 2009-Mar-01 22:57:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.980 1.012 1.019 2009-Mar-01 22:57:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.109 1.031 0.119 2009-Mar-01 22:57:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:57:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:57:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:57:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:57:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:57:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:57:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:57:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:57:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:57:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Mar-01 22:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:57:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:58:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:58:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:58:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 22:58:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:58:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:58:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-01 22:58:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:58:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-01 22:58:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:58:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:58:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-01 22:58:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:58:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:58:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:58:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 0.910 1.050 1.061 2009-Mar-01 22:58:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.959 1.088 1.111 2009-Mar-01 22:58:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.986 1.005 1.010 2009-Mar-01 22:58:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.109 1.030 0.119 2009-Mar-01 22:58:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:58:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:58:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 22:58:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:58:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 22:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 22:58:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:58:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:58:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 22:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 22:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:59:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 22:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:59:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 22:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 22:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:59:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 22:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:59:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 22:59:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 0.913 1.046 1.059 2009-Mar-01 22:59:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.959 1.089 1.114 2009-Mar-01 22:59:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.977 1.006 1.011 2009-Mar-01 22:59:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.109 1.031 0.119 2009-Mar-01 22:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 22:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 22:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 22:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 22:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 22:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 22:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 22:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 22:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:00:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:00:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 23:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:00:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.915 1.052 1.062 2009-Mar-01 23:00:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.965 1.092 1.112 2009-Mar-01 23:00:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.979 1.009 1.015 2009-Mar-01 23:00:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.109 1.030 0.119 2009-Mar-01 23:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 23:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-Mar-01 23:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:00:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 23:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 23:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-Mar-01 23:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 23:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-Mar-01 23:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:01:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:01:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 0.912 1.050 1.060 2009-Mar-01 23:01:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.968 1.093 1.115 2009-Mar-01 23:01:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.982 1.008 1.013 2009-Mar-01 23:01:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.109 1.031 0.118 2009-Mar-01 23:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:01:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:02:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Mar-01 23:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Mar-01 23:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:02:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 0.913 1.051 1.063 2009-Mar-01 23:02:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.968 1.092 1.116 2009-Mar-01 23:02:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.988 1.008 1.017 2009-Mar-01 23:02:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.109 1.033 0.119 2009-Mar-01 23:02:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-01 23:02:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:02:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-01 23:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Mar-01 23:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-01 23:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-01 23:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:03:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-Mar-01 23:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-Mar-01 23:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-01 23:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:03:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 0.915 1.054 1.067 2009-Mar-01 23:03:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.967 1.092 1.117 2009-Mar-01 23:03:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.986 1.017 1.025 2009-Mar-01 23:03:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.109 1.030 0.119 2009-Mar-01 23:03:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-01 23:03:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Mar-01 23:03:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-01 23:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Mar-01 23:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:04:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.919 1.068 1.079 2009-Mar-01 23:04:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.972 1.097 1.126 2009-Mar-01 23:04:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.987 1.016 1.021 2009-Mar-01 23:04:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.109 1.037 0.119 2009-Mar-01 23:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:04:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Mar-01 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:04:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:04:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:04:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:05:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:05:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:05:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:05:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Mar-01 23:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Mar-01 23:05:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-01 23:05:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:05:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Mar-01 23:05:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:05:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:05:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:05:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:05:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Mar-01 23:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:05:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:05:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.920 1.062 1.071 2009-Mar-01 23:05:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.978 1.100 1.129 2009-Mar-01 23:05:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.988 1.016 1.021 2009-Mar-01 23:05:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.109 1.035 0.119 2009-Mar-01 23:05:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:05:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-Mar-01 23:05:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-Mar-01 23:05:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-01 23:05:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Mar-01 23:05:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.136 (still bad) 2009-Mar-01 23:06:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-01 23:06:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-01 23:06:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-01 23:06:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-Mar-01 23:06:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.138 (still bad) 2009-Mar-01 23:06:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Mar-01 23:06:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Mar-01 23:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-Mar-01 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:06:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:06:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:06:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 23:06:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-01 23:06:26 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-01 23:06:26 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 LOG1 fixed_driftmap: New position: year = 2009.1669070525008 RA = 09:19:02.8 RA/Dec = 09:19:36.8 +23:19:10.7 2009-Mar-01 23:06:26 NOTE fixed_driftmap: Correcting ZA to 4:57:57.0 ... 2009-Mar-01 23:06:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.9658326625 -CF 2009-Mar-01 23:06:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Mar-01 23:06:26 START begin_task: Starting task 'WAPP calibration' 2009-Mar-01 23:06:26 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-01 23:06:26 START begin_task: Starting task 'selecting calibration type' 2009-Mar-01 23:06:26 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-01 23:06:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-01 23:06:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 23:06:26 START begin_task: Starting task 'waiting on setcal' 2009-Mar-01 23:06:26 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.9658326625 -CF 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 23:06:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 23:06:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-01 23:06:26 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-01 23:06:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-01 23:06:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 23:06:26 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-01 23:06:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 23:06:26 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 23:06:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 23:06:27 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 23:06:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-01 23:06:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-01 23:06:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-01 23:06:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-01 23:06:27 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 23:06:27 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-01 23:06:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-01 23:06:27 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-01 23:06:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-01 23:06:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-01 23:06:27 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-01 23:06:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-01 23:06:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-01 23:06:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 23:06:27 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 23:06:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-01 23:06:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 23:06:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 23:06:27 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Mar-01 23:06:27 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-01 23:06:27 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Mar-01 23:06:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-01 23:06:27 INFO2 take_data: Starting WAPP 1-second scan: 906000212 2009-Mar-01 23:06:27 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-01 23:06:27 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-01 23:06:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 23:06:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-01 23:06:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11188.00 2009-Mar-01 23:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 23:06:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-01 23:06:29 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-01 23:06:29 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-01 23:06:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-01 23:06:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-01 23:06:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-01 23:06:29 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-01 23:06:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-01 23:06:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-01 23:06:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-01 23:06:29 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-01 23:06:29 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-01 23:06:29 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-01 23:06:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-01 23:06:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-01 23:06:29 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-01 23:06:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Mar-01 23:06:29 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-01 23:06:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Shan, Riccardo 2009-Mar-01 23:06:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Shan, Riccardo 2009-Mar-01 23:06:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Shan, Riccardo 2009-Mar-01 23:06:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Shan, Riccardo 2009-Mar-01 23:06:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Mar-01 23:06:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Mar-01 23:06:30 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-01 23:06:30 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-01 23:06:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Mar-01 23:06:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-01 23:06:30 INFO2 take_data: Starting WAPP 600-second scan: 906000213 2009-Mar-01 23:06:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-01 23:06:30 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-01 23:06:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Shan, Riccardo' 2009-Mar-01 23:06:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-01 23:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.565 (still bad) 2009-Mar-01 23:06:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-01 23:06:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11191.00 2009-Mar-01 23:06:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20090301.a2010.0034.fits 2009-Mar-01 23:06:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090301.a2010.0034.fits} 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.500000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1011.500000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.500000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Mar-01 23:06:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Mar-01 23:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.565 (still bad) 2009-Mar-01 23:06:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:06:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-01 23:06:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:06:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:06:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-Mar-01 23:06:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-01 23:06:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 0.914 1.052 1.062 2009-Mar-01 23:06:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.968 1.090 1.121 2009-Mar-01 23:06:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.984 1.018 1.025 2009-Mar-01 23:06:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.109 1.032 0.119 2009-Mar-01 23:06:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:06:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-Mar-01 23:06:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-Mar-01 23:06:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Mar-01 23:06:56 LOG3 WAPP=4-chip_count