2008-Mar-31 18:52:49 BEGIN executive: CIMA executive starting ... 2008-Mar-31 18:52:49 NOTE executive: STARTING NEW CIMA SESSION 2008-Mar-31 18:52:49 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-03-27 17:14 2008-Mar-31 18:52:49 INFO4 executive: This is an ON-LINE session 2008-Mar-31 18:52:49 INFO4 executive: This is a REMOTE session 2008-Mar-31 18:52:49 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Mar-31 18:52:49 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Kornreich' 2008-Mar-31 18:52:49 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog' 2008-Mar-31 18:52:49 LOG2 log_preferences: Currently applied preferences: 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(dailylog) = general 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(logcolours) = full 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(displayformat) = long 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(logformat) = new 2008-Mar-31 18:52:49 LOG2 log_preferences: prefs(fontsize) = 3 2008-Mar-31 18:52:49 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Mar-31 18:52:49 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Mar-31 18:52:49 ALERT executive: CIMA executive ready 2008-Mar-31 18:52:51 NOTE frontend: CIMA frontend ready 2008-Mar-31 18:52:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:52:53 LOG4 got_cormsg: From DATATAKING: setup 2008-Mar-31 18:52:58 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Mar-31 18:52:58 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Mar-31 18:52:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Mar-31 18:52:58 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Mar-31 18:52:58 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Mar-31 18:52:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Mar-31 18:52:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Mar-31 18:52:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Mar-31 18:52:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Mar-31 18:52:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Mar-31 18:52:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Mar-31 18:52:58 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Mar-31 18:52:58 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Mar-31 18:52:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:52:58 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Mar-31 18:52:58 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Mar-31 18:53:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Mar-31 18:53:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:00 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: 2008-Mar-31 18:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:13 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Mar-31 18:53:13 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Mar-31 18:53:13 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Mar-31 18:53:13 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Mar-31 18:53:13 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Mar-31 18:53:13 NOTE restart_wapp: Restarting all WAPPs 2008-Mar-31 18:53:13 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Mar-31 18:53:14 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Mar-31 18:53:14 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Mar-31 18:53:14 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Mar-31 18:53:17 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Mar-31 18:53:17 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Mar-31 18:53:17 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Mar-31 18:53:17 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Mar-31 18:53:46 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Mar-31 18:53:46 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Mar-31 18:53:46 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Mar-31 18:53:46 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Mar-31 18:53:46 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Mar-31 18:53:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Mar-31 18:53:46 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Mar-31 18:53:46 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Mar-31 18:53:46 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Mar-31 18:53:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Mar-31 18:53:46 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Mar-31 18:53:46 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Mar-31 18:53:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Mar-31 18:53:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Mar-31 18:53:48 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Mar-31 18:53:48 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Mar-31 18:53:48 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Mar-31 18:53:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Mar-31 18:53:48 INFO1 config_iflo: Selecting receiver ALFA 2008-Mar-31 18:53:48 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Mar-31 18:53:48 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Mar-31 18:53:48 START begin_task: Starting task 'selecting receiver ALFA' 2008-Mar-31 18:53:48 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 NOTE select_receiver: Starting to select receiver ALFA 2008-Mar-31 18:53:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Mar-31 18:53:49 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Mar-31 18:53:49 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Mar-31 18:53:49 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Mar-31 18:53:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:53:49 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Mar-31 18:53:49 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Mar-31 18:53:49 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Mar-31 18:53:49 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Mar-31 18:53:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Mar-31 18:53:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 18:53:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 18:53:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 18:53:49 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 18:53:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 18:53:49 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 18:53:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Mar-31 18:53:49 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Mar-31 18:53:49 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Mar-31 18:53:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Mar-31 18:53:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:53:49 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Mar-31 18:53:49 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Mar-31 18:53:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:53:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 18:54:05 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Mar-31 18:54:05 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Mar-31 18:54:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Mar-31 18:54:05 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Mar-31 18:54:05 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Mar-31 18:54:05 DONE finish_task: DONE finished configuration: IF/LO path 2008-Mar-31 18:54:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:54:05 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Mar-31 18:54:06 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Mar-31 18:54:06 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Mar-31 18:54:06 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Mar-31 18:54:06 START begin_task: Starting task 'selecting calibration port' 2008-Mar-31 18:54:06 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG3 vw_send: To DATATAKING: calport 3 2008-Mar-31 18:54:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Mar-31 18:54:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:06 START begin_task: Starting task 'waiting on calport' 2008-Mar-31 18:54:06 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 18:54:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Mar-31 18:54:06 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Mar-31 18:54:06 STOP finish_task: Finishing task 'selecting calibration port' 2008-Mar-31 18:54:06 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 INFO2 finish_task: DONE finished configuring: calibration port 2008-Mar-31 18:54:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:54:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Mar-31 18:54:06 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Mar-31 18:54:06 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Mar-31 18:54:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 18:54:06 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 18:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 18:54:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 18:54:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 18:54:06 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 18:54:06 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Mar-31 18:54:06 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Mar-31 18:54:06 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:54:07 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Mar-31 18:54:07 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Mar-31 18:54:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Mar-31 18:54:07 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Mar-31 18:54:07 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Mar-31 18:54:07 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Mar-31 18:54:07 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Mar-31 18:54:07 LOG3 track_source: Calling 'track_source galfasrc 070800.0 +033142 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Mar-31 18:54:07 START begin_task: Starting task 'sending tracking commands' 2008-Mar-31 18:54:07 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Mar-31 18:54:07 INFO1 track_source: Starting to track galfasrc 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: set ra 070800.0 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: set dec +033142 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: pnt tr 070800.0 +033142 -CJ 2008-Mar-31 18:54:07 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Mar-31 18:54:07 STOP finish_task: Finishing task 'sending tracking commands' 2008-Mar-31 18:54:07 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 INFO2 finish_task: DONE finished sending: tracking commands 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:54:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Mar-31 18:54:07 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Mar-31 18:54:07 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:54:07 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Mar-31 18:54:07 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Mar-31 18:54:07 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Mar-31 18:54:07 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Mar-31 18:54:07 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Mar-31 18:54:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Mar-31 18:54:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Mar-31 18:54:07 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Mar-31 18:54:07 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Mar-31 18:54:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 18:54:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0029.fits 2008-Mar-31 18:54:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Mar-31 18:54:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Mar-31 18:54:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Mar-31 18:54:07 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080331.a2010.0029.fits} 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: set ra 070800.0 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: set dec +033142 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: vw% 070800.0 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: vw% +033142 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: pnt tr 070800.0 +033142 -CJ 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Mar-31 18:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 18:54:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Mar-31 18:54:28 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Mar-31 18:54:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Mar-31 18:54:28 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Mar-31 18:54:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Mar-31 18:54:28 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Mar-31 18:54:28 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Mar-31 18:54:28 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Mar-31 18:54:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:54:29 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Mar-31 18:54:29 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Mar-31 18:54:29 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Mar-31 18:54:29 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Mar-31 18:54:29 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Mar-31 18:54:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Mar-31 18:54:29 LOG3 waittrk: Start waittrk 5 2008-Mar-31 18:54:29 START begin_task: Starting task 'waiting on telescope movement' 2008-Mar-31 18:54:29 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Mar-31 18:54:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Mar-31 18:54:34 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Mar-31 18:54:34 START begin_task: Starting task 'waiting on telescope on source' 2008-Mar-31 18:54:34 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Mar-31 18:54:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Mar-31 18:54:37 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Mar-31 18:54:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Mar-31 18:54:37 INFO2 waittrk: Now tracking galfasrc 2008-Mar-31 18:54:37 LOG4 waittrk: Current telescope position: Az = 357.57 ZA = 14.82 2008-Mar-31 18:54:37 STOP finish_task: Finishing task 'waiting on telescope' 2008-Mar-31 18:54:37 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Mar-31 18:54:37 DONE finish_task: DONE finished waiting: telescope on source 2008-Mar-31 18:54:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 18:54:37 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Mar-31 18:54:37 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Mar-31 18:54:37 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Mar-31 18:54:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Mar-31 18:54:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Mar-31 18:54:38 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Mar-31 18:54:38 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Mar-31 18:54:38 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Mar-31 18:54:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Mar-31 18:54:38 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 18:54:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 18:54:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:38 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 18:54:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 18:54:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 18:54:38 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 18:54:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 18:54:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 18:54:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 18:54:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 18:54:38 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 18:54:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 18:54:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 18:54:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 18:54:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 18:54:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 18:54:38 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 18:54:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 18:54:38 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 18:54:38 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 INFO2 finish_task: DONE finished configuring: calibration type 2008-Mar-31 18:54:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:54:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 18:54:38 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 18:54:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 18:54:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 18:54:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 18:54:38 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080331.a2010.0029.fits' is empty! 2008-Mar-31 18:54:38 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Mar-31 18:54:38 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Mar-31 18:54:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 18:54:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 18:54:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 18:54:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 18:54:38 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Mar-31 18:54:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 18:54:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 18:54:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 18:54:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 18:54:38 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2008-Mar-31 18:54:39 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Mar-31 18:54:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 18:54:39 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Mar-31 18:54:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Mar-31 18:54:39 INFO2 adjust_power: Starting to adjust WAPP power 2008-Mar-31 18:54:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Mar-31 18:54:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Mar-31 18:54:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:39 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Mar-31 18:54:39 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Mar-31 18:54:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Mar-31 18:54:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 18:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 18:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 18:54:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Mar-31 18:54:42 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2008-Mar-31 18:54:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Mar-31 18:54:42 START begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 18:54:42 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Mar-31 18:54:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Mar-31 18:54:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 18:54:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 18:54:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 18:54:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 18:54:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Mar-31 18:54:42 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Mar-31 18:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Mar-31 18:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:42 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Mar-31 18:54:42 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Mar-31 18:54:42 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Mar-31 18:54:42 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Mar-31 18:54:42 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Mar-31 18:54:42 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Mar-31 18:54:42 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.894 1.004 ALFA beam 1: 1.073 1.033 2008-Mar-31 18:54:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.001 0.909 ALFA beam 3: 0.927 0.990 2008-Mar-31 18:54:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.885 0.916 ALFA beam 5: 0.980 1.090 2008-Mar-31 18:54:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.952 0.991 ALFA beam 7: 1.042 0.879 2008-Mar-31 18:54:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 18:54:43 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Mar-31 18:54:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:54:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 18:54:43 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 18:54:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 18:54:43 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Mar-31 18:54:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 18:54:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 18:54:43 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Mar-31 18:54:43 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Mar-31 18:54:43 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Mar-31 18:54:43 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:54:43 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:54:43 LOG2 antvel: Parameters to Doppler: Topocentric 82482 2008 91 0.0 2008-Mar-31 18:54:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:54:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Mar-31 18:54:43 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Mar-31 18:54:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:54:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:54:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:54:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:54:43 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:54:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:54:43 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:54:43 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.106610 2008.2513018100237 18.999933 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333306 3.528333333333337 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 1 7.131941271273050 3.632408293731218 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 2 7.127498277941815 3.560377274411571 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 3 7.128864510308464 3.456212500767322 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 4 7.134741089452112 3.424286017677272 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 5 7.139193263910831 3.496785947441528 2008-Mar-31 18:54:43 LOG4 log_alfabeam: ALFABEAM 6 7.137759708435852 3.600741113824005 2008-Mar-31 18:54:43 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100243 2008-Mar-31 18:54:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:54:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:54:43 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Mar-31 18:54:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:54:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:54:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:54:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82484.00 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:54:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:54:54 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Mar-31 18:54:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:54:54 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Mar-31 18:54:54 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Mar-31 18:54:54 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Mar-31 18:54:54 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Mar-31 18:54:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:54:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:54:54 LOG2 antvel: Parameters to Doppler: Topocentric 82494 2008 91 0.0 2008-Mar-31 18:54:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:54:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Mar-31 18:54:54 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Mar-31 18:54:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:54:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:54:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:54:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:54:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:54:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:54:54 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Mar-31 18:54:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:54:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.109953 2008.2513021902807 18.999933 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333299 3.528333333333335 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 1 7.131963805793776 3.632475277664184 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 2 7.127505244253643 3.560660191851372 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 3 7.128848923737950 3.456429677899103 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 4 7.134718567546676 3.424218275180561 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 5 7.139186406427472 3.496501876335742 2008-Mar-31 18:54:54 LOG4 log_alfabeam: ALFABEAM 6 7.137775353963269 3.600526026736273 2008-Mar-31 18:54:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100244 2008-Mar-31 18:54:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:54:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:54:55 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Mar-31 18:54:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:54:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:54:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:54:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:54:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82496.00 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:54:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:55:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:55:06 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Mar-31 18:55:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:55:06 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Mar-31 18:55:06 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Mar-31 18:55:06 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Mar-31 18:55:06 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Mar-31 18:55:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:55:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:55:06 LOG2 antvel: Parameters to Doppler: Topocentric 82506 2008 91 0.0 2008-Mar-31 18:55:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:55:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Mar-31 18:55:06 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Mar-31 18:55:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:55:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:55:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:55:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:55:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:55:06 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Mar-31 18:55:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:55:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.113295 2008.2513025705377 18.999933 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333354 3.528333333333332 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 1 7.131986352465154 3.632541161700812 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 2 7.127512270953716 3.560942740133544 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 3 7.128833385961832 3.456647587675898 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 4 7.134696033152706 3.424151631654881 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 5 7.139179488028919 3.496218163350099 2008-Mar-31 18:55:06 LOG4 log_alfabeam: ALFABEAM 6 7.137790951619320 3.600310200785613 2008-Mar-31 18:55:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100245 2008-Mar-31 18:55:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:55:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:55:07 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Mar-31 18:55:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:55:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:55:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82508.00 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:55:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:55:18 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Mar-31 18:55:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:55:18 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Mar-31 18:55:18 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Mar-31 18:55:18 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Mar-31 18:55:18 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Mar-31 18:55:18 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:55:18 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:55:18 LOG2 antvel: Parameters to Doppler: Topocentric 82518 2008 91 0.0 2008-Mar-31 18:55:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:55:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Mar-31 18:55:18 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Mar-31 18:55:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:55:18 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:55:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:55:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:55:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:55:18 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Mar-31 18:55:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:55:18 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.116638 2008.2513029507948 18.999933 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333257 3.528333333333334 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 1 7.132008924049589 3.632605982490941 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 2 7.127519362050351 3.561225078917329 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 3 7.128817888216474 3.456866353770029 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 4 7.134673473513558 3.424086050046254 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 5 7.139172504763838 3.495934648200220 2008-Mar-31 18:55:18 LOG4 log_alfabeam: ALFABEAM 6 7.137806510199566 3.600093513403656 2008-Mar-31 18:55:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100246 2008-Mar-31 18:55:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:55:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:55:19 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Mar-31 18:55:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:55:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:55:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82520.00 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:55:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:55:30 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Mar-31 18:55:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:55:30 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Mar-31 18:55:30 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Mar-31 18:55:30 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Mar-31 18:55:30 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Mar-31 18:55:30 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:55:30 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:55:30 LOG2 antvel: Parameters to Doppler: Topocentric 82530 2008 91 0.0 2008-Mar-31 18:55:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:55:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Mar-31 18:55:30 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Mar-31 18:55:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:55:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:55:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:55:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:55:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:55:30 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Mar-31 18:55:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:55:30 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.119980 2008.251303331052 18.999933 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333262 3.528333333333334 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 1 7.132031506311568 3.632669698584064 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 2 7.127526513098529 3.561507029887486 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 3 7.128802440304831 3.457085838487227 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 4 7.134650902857373 3.424021572310880 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 5 7.139165461005586 3.495651509978619 2008-Mar-31 18:55:30 LOG4 log_alfabeam: ALFABEAM 6 7.137822019861660 3.599876100898610 2008-Mar-31 18:55:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100247 2008-Mar-31 18:55:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:55:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:55:31 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Mar-31 18:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:55:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:55:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82532.00 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:55:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:55:42 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Mar-31 18:55:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:55:42 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Mar-31 18:55:42 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Mar-31 18:55:42 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Mar-31 18:55:42 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Mar-31 18:55:42 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:55:42 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:55:42 LOG2 antvel: Parameters to Doppler: Topocentric 82542 2008 91 0.0 2008-Mar-31 18:55:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:55:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Mar-31 18:55:42 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Mar-31 18:55:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:55:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:55:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:55:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:55:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:55:42 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Mar-31 18:55:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:55:42 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.123323 2008.251303711309 18.999933 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333180 3.528333333333333 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 1 7.132054112030551 3.632732345546258 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 2 7.127533728168603 3.561788752396498 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 3 7.128787033508494 3.457306166278779 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 4 7.134628308410361 3.423958162477712 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 5 7.139158352740367 3.495368588697350 2008-Mar-31 18:55:42 LOG4 log_alfabeam: ALFABEAM 6 7.137837489356649 3.599657839917578 2008-Mar-31 18:55:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100248 2008-Mar-31 18:55:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:55:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:55:43 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Mar-31 18:55:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:55:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:55:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82544.00 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:55:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:55:54 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Mar-31 18:55:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:55:54 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Mar-31 18:55:54 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Mar-31 18:55:54 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Mar-31 18:55:54 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Mar-31 18:55:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:55:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:55:54 LOG2 antvel: Parameters to Doppler: Topocentric 82554 2008 91 0.0 2008-Mar-31 18:55:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:55:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Mar-31 18:55:54 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Mar-31 18:55:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:55:54 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:55:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:55:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:55:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:55:54 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Mar-31 18:55:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:55:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.126665 2008.251304091566 18.999933 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333155 3.528333333333337 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 1 7.132076726946461 3.632793883442031 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 2 7.127541002728535 3.562070068551559 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 3 7.128771677566843 3.457527198354740 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 4 7.134605704425113 3.423895860989453 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 5 7.139151184428666 3.495086063042821 2008-Mar-31 18:55:54 LOG4 log_alfabeam: ALFABEAM 6 7.137852908903834 3.599438867872942 2008-Mar-31 18:55:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100249 2008-Mar-31 18:55:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:55:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:55:55 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Mar-31 18:55:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:55:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:55:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:55:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82556.00 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:55:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:56:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:56:06 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Mar-31 18:56:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:56:06 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Mar-31 18:56:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Mar-31 18:56:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 18:56:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 18:56:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 18:56:06 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Mar-31 18:56:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 18:56:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 18:56:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 18:56:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 18:56:06 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Mar-31 18:56:06 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Mar-31 18:56:06 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Mar-31 18:56:06 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Mar-31 18:56:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:56:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:56:06 LOG2 antvel: Parameters to Doppler: Topocentric 82566 2008 91 0.0 2008-Mar-31 18:56:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:56:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Mar-31 18:56:06 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Mar-31 18:56:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:56:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:56:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:56:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:56:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:56:06 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Mar-31 18:56:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:56:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.130008 2008.251304471823 18.999933 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333258 3.528333333333333 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 1 7.132099363854306 3.632854346749439 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 2 7.127548340910916 3.562351137382145 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 3 7.128756363808818 3.457749059933101 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 4 7.134583078112084 3.423834632962152 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 5 7.139143951995210 3.494803773339799 2008-Mar-31 18:56:06 LOG4 log_alfabeam: ALFABEAM 6 7.137868287208871 3.599219060639196 2008-Mar-31 18:56:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100250 2008-Mar-31 18:56:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:56:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:56:07 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Mar-31 18:56:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:56:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:56:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82568.00 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.503 > 1.4)! 2008-Mar-31 18:56:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.286 1.382 1.486 1.407 2008-Mar-31 18:56:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.360 1.270 1.325 1.402 2008-Mar-31 18:56:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.322 1.428 1.503 2008-Mar-31 18:56:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.364 1.422 1.485 1.255 2008-Mar-31 18:56:13 INFO5 check_wapp_levels: WAPP power levels are between 1.254 and 1.500 (still bad) 2008-Mar-31 18:56:15 INFO5 check_wapp_levels: WAPP power levels are between 1.253 and 1.502 (still bad) 2008-Mar-31 18:56:17 INFO5 check_wapp_levels: WAPP power levels are between 1.253 and 1.500 (still bad) 2008-Mar-31 18:56:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:56:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:56:18 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Mar-31 18:56:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:56:18 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Mar-31 18:56:18 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Mar-31 18:56:18 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Mar-31 18:56:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Mar-31 18:56:18 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25130 J 2008-Mar-31 18:56:18 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:56:18 LOG2 antvel: Parameters to Doppler: Topocentric 82578 2008 91 0.0 2008-Mar-31 18:56:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:56:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Mar-31 18:56:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Mar-31 18:56:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:56:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:56:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:56:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:56:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:56:18 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Mar-31 18:56:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:56:18 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.133350 2008.25130485208 18.999933 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333007 3.528333333333332 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 1 7.132122008472556 3.632913697055800 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 2 7.127555738095434 3.562631781446476 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 3 7.128741101907570 3.457971611149341 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 4 7.134560443746365 3.423774517317158 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 5 7.139136659987432 3.494521897839901 2008-Mar-31 18:56:18 LOG4 log_alfabeam: ALFABEAM 6 7.137883614554556 3.598998556712353 2008-Mar-31 18:56:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100251 2008-Mar-31 18:56:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:56:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:56:19 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Mar-31 18:56:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:56:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:56:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82580.00 2008-Mar-31 18:56:20 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.500 (still bad) 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:22 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.492 (still bad) 2008-Mar-31 18:56:24 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.490 (still bad) 2008-Mar-31 18:56:26 INFO5 check_wapp_levels: WAPP power levels are between 1.253 and 1.491 (still bad) 2008-Mar-31 18:56:28 INFO5 check_wapp_levels: WAPP power levels are between 1.254 and 1.492 (still bad) 2008-Mar-31 18:56:30 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.492 (still bad) 2008-Mar-31 18:56:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:56:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:56:30 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Mar-31 18:56:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:56:30 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Mar-31 18:56:30 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Mar-31 18:56:30 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Mar-31 18:56:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Mar-31 18:56:30 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:56:30 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:56:30 LOG2 antvel: Parameters to Doppler: Topocentric 82590 2008 91 0.0 2008-Mar-31 18:56:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:56:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Mar-31 18:56:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Mar-31 18:56:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:56:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:56:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:56:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:56:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:56:30 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Mar-31 18:56:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:56:30 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.136692 2008.2513052323372 18.999933 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 0 7.133333333332811 3.528333333333330 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 1 7.132144666827989 3.632971950480992 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 2 7.127563196239424 3.562912075618029 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 3 7.128725887788586 3.458194911048317 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 4 7.134537795302103 3.423715497757277 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 5 7.139129306476953 3.494240361386968 2008-Mar-31 18:56:30 LOG4 log_alfabeam: ALFABEAM 6 7.137898895034988 3.598777297524399 2008-Mar-31 18:56:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100252 2008-Mar-31 18:56:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:56:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:56:31 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Mar-31 18:56:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:56:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:56:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82592.00 2008-Mar-31 18:56:32 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.492 (still bad) 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:34 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.489 (still bad) 2008-Mar-31 18:56:36 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.486 (still bad) 2008-Mar-31 18:56:38 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.490 (still bad) 2008-Mar-31 18:56:40 INFO5 check_wapp_levels: WAPP power levels are between 1.253 and 1.489 (still bad) 2008-Mar-31 18:56:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:56:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:56:42 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Mar-31 18:56:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:56:42 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Mar-31 18:56:42 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Mar-31 18:56:42 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Mar-31 18:56:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Mar-31 18:56:42 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:56:42 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:56:42 LOG2 antvel: Parameters to Doppler: Topocentric 82602 2008 91 0.0 2008-Mar-31 18:56:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:56:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Mar-31 18:56:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Mar-31 18:56:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:56:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:56:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:56:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:56:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:56:42 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Mar-31 18:56:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:56:42 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.140035 2008.2513056125943 18.999933 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 0 7.133333333334327 3.528333333333342 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 1 7.132167344967247 3.633029121941135 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 2 7.127570717357687 3.563192094384998 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 3 7.128710717417006 3.458419019495068 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 4 7.134515126740858 3.423657559188197 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 5 7.139121889470541 3.493959089198562 2008-Mar-31 18:56:42 LOG4 log_alfabeam: ALFABEAM 6 7.137914132694689 3.598555223680000 2008-Mar-31 18:56:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100253 2008-Mar-31 18:56:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:56:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:56:43 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Mar-31 18:56:43 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.489 (still bad) 2008-Mar-31 18:56:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:56:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:56:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82604.00 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:45 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.489 (still bad) 2008-Mar-31 18:56:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:47 INFO5 check_wapp_levels: WAPP power levels are between 1.249 and 1.483 (still bad) 2008-Mar-31 18:56:49 INFO5 check_wapp_levels: WAPP power levels are between 1.249 and 1.484 (still bad) 2008-Mar-31 18:56:51 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.484 (still bad) 2008-Mar-31 18:56:53 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.483 (still bad) 2008-Mar-31 18:56:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:56:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:56:54 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Mar-31 18:56:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:56:54 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Mar-31 18:56:54 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Mar-31 18:56:54 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Mar-31 18:56:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Mar-31 18:56:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:56:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:56:54 LOG2 antvel: Parameters to Doppler: Topocentric 82614 2008 91 0.0 2008-Mar-31 18:56:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:56:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Mar-31 18:56:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Mar-31 18:56:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:56:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:56:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:56:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:56:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:56:54 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Mar-31 18:56:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:56:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.143377 2008.2513059928513 18.999933 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333937 3.528333333333339 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 1 7.132190028572295 3.633085175320480 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 2 7.127578296704360 3.563471661035500 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 3 7.128695600372548 3.458643795054277 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 4 7.134492452363710 3.423600738236045 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 5 7.139114413642026 3.493678258820192 2008-Mar-31 18:56:54 LOG4 log_alfabeam: ALFABEAM 6 7.137929317910898 3.598332475260298 2008-Mar-31 18:56:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100254 2008-Mar-31 18:56:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:56:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:56:55 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Mar-31 18:56:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:56:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:56:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:56:55 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.482 (still bad) 2008-Mar-31 18:56:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82616.00 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:56:57 INFO5 check_wapp_levels: WAPP power levels are between 1.234 and 1.482 (still bad) 2008-Mar-31 18:56:59 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.470 (still bad) 2008-Mar-31 18:57:01 INFO5 check_wapp_levels: WAPP power levels are between 1.235 and 1.471 (still bad) 2008-Mar-31 18:57:03 INFO5 check_wapp_levels: WAPP power levels are between 1.237 and 1.470 (still bad) 2008-Mar-31 18:57:05 INFO5 check_wapp_levels: WAPP power levels are between 1.235 and 1.469 (still bad) 2008-Mar-31 18:57:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:57:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:57:06 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Mar-31 18:57:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:57:06 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Mar-31 18:57:06 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Mar-31 18:57:06 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Mar-31 18:57:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Mar-31 18:57:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:57:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:57:06 LOG2 antvel: Parameters to Doppler: Topocentric 82626 2008 91 0.0 2008-Mar-31 18:57:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:57:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Mar-31 18:57:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Mar-31 18:57:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:57:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:57:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:57:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:57:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:57:06 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Mar-31 18:57:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:57:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.146720 2008.2513063731083 18.999933 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333292 3.528333333333331 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 1 7.132212730477042 3.633140142360975 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 2 7.127585938564327 3.563750933720994 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 3 7.128680528101584 3.458869364805944 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 4 7.134469759347529 3.423545002751208 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 5 7.139106874770225 3.493397711429442 2008-Mar-31 18:57:06 LOG4 log_alfabeam: ALFABEAM 6 7.137944459275012 3.598108926262332 2008-Mar-31 18:57:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100255 2008-Mar-31 18:57:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:57:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:57:07 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Mar-31 18:57:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:57:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:57:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82628.00 2008-Mar-31 18:57:08 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.471 (still bad) 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:10 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.468 (still bad) 2008-Mar-31 18:57:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.470 > 1.4)! 2008-Mar-31 18:57:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.346 1.427 1.382 2008-Mar-31 18:57:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.342 1.235 1.263 1.372 2008-Mar-31 18:57:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.231 1.297 1.321 1.451 2008-Mar-31 18:57:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.350 1.408 1.470 1.245 2008-Mar-31 18:57:14 INFO5 check_wapp_levels: WAPP power levels are between 1.231 and 1.468 (still bad) 2008-Mar-31 18:57:16 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.468 (still bad) 2008-Mar-31 18:57:18 INFO5 check_wapp_levels: WAPP power levels are between 1.232 and 1.468 (still bad) 2008-Mar-31 18:57:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:57:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:57:18 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Mar-31 18:57:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:57:18 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Mar-31 18:57:18 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Mar-31 18:57:18 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Mar-31 18:57:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Mar-31 18:57:18 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:57:18 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:57:18 LOG2 antvel: Parameters to Doppler: Topocentric 82638 2008 91 0.0 2008-Mar-31 18:57:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:57:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Mar-31 18:57:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Mar-31 18:57:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:57:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:57:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:57:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:57:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:57:18 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Mar-31 18:57:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:57:18 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.150062 2008.2513067533653 18.999933 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333306 3.528333333333329 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 1 7.132235436352305 3.633193988485671 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 2 7.127593638107652 3.564029736250833 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 3 7.128665510111130 3.459095586295005 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 4 7.134447062016653 3.423490387822007 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 5 7.139099277599562 3.493117624065864 2008-Mar-31 18:57:18 LOG4 log_alfabeam: ALFABEAM 6 7.137959547232337 3.597884717796977 2008-Mar-31 18:57:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100256 2008-Mar-31 18:57:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:57:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:57:19 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Mar-31 18:57:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82640.00 2008-Mar-31 18:57:20 INFO5 check_wapp_levels: WAPP power levels are between 1.231 and 1.468 (still bad) 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:22 INFO5 check_wapp_levels: WAPP power levels are between 1.225 and 1.465 (still bad) 2008-Mar-31 18:57:24 INFO5 check_wapp_levels: WAPP power levels are between 1.226 and 1.465 (still bad) 2008-Mar-31 18:57:26 INFO5 check_wapp_levels: WAPP power levels are between 1.225 and 1.464 (still bad) 2008-Mar-31 18:57:28 INFO5 check_wapp_levels: WAPP power levels are between 1.224 and 1.465 (still bad) 2008-Mar-31 18:57:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:57:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:57:30 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2008-Mar-31 18:57:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:57:30 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Mar-31 18:57:30 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Mar-31 18:57:30 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Mar-31 18:57:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 18:57:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 18:57:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 18:57:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 18:57:30 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Mar-31 18:57:30 INFO5 check_wapp_levels: WAPP power levels are between 1.226 and 1.465 (still bad) 2008-Mar-31 18:57:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 18:57:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 18:57:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 18:57:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 18:57:30 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Mar-31 18:57:30 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Mar-31 18:57:30 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Mar-31 18:57:30 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Mar-31 18:57:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Mar-31 18:57:30 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:57:30 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:57:30 LOG2 antvel: Parameters to Doppler: Topocentric 82650 2008 91 0.0 2008-Mar-31 18:57:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:57:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Mar-31 18:57:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Mar-31 18:57:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:57:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:57:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:57:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:57:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:57:30 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Mar-31 18:57:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:57:30 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.153405 2008.2513071336225 18.999933 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333473 3.528333333333334 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 1 7.132258159039079 3.633246744336265 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 2 7.127601399678231 3.564308226397504 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 3 7.128650537898037 3.459322587324070 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 4 7.134424347533521 3.423436862398481 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 5 7.139091617857115 3.492837838276265 2008-Mar-31 18:57:30 LOG4 log_alfabeam: ALFABEAM 6 7.137974590324934 3.597659723132156 2008-Mar-31 18:57:31 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100257 2008-Mar-31 18:57:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:57:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:57:31 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Mar-31 18:57:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:57:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:57:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82652.00 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.926 and 1.464 (still bad) 2008-Mar-31 18:57:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.127 2008-Mar-31 18:57:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:57:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:57:42 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Mar-31 18:57:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:57:42 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Mar-31 18:57:42 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Mar-31 18:57:42 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Mar-31 18:57:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Mar-31 18:57:42 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:57:42 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:57:42 LOG2 antvel: Parameters to Doppler: Topocentric 82662 2008 91 0.0 2008-Mar-31 18:57:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:57:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Mar-31 18:57:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Mar-31 18:57:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:57:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:57:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:57:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:57:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:57:42 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Mar-31 18:57:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:57:42 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.156747 2008.2513075138795 18.999933 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333421 3.528333333333337 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 1 7.132280884194508 3.633298376879827 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 2 7.127609218362257 3.564586228519707 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 3 7.128635620898189 3.459550224441541 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 4 7.134401630235635 3.423384460025793 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 5 7.139083900383026 3.492558530566271 2008-Mar-31 18:57:42 LOG4 log_alfabeam: ALFABEAM 6 7.137989579068653 3.597434084385860 2008-Mar-31 18:57:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100258 2008-Mar-31 18:57:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:57:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:57:43 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Mar-31 18:57:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:57:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:57:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82664.00 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:57:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:57:54 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Mar-31 18:57:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:57:54 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Mar-31 18:57:54 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Mar-31 18:57:54 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Mar-31 18:57:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Mar-31 18:57:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:57:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:57:54 LOG2 antvel: Parameters to Doppler: Topocentric 82674 2008 91 0.0 2008-Mar-31 18:57:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:57:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Mar-31 18:57:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Mar-31 18:57:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:57:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:57:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:57:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:57:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:57:54 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Mar-31 18:57:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:57:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.160090 2008.2513078941365 18.999933 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333518 3.528333333333340 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 1 7.132303624668900 3.633348915654828 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 2 7.127617098563305 3.564863899994918 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 3 7.128620750658750 3.459778626159407 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 4 7.134378897276425 3.423333150756560 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 5 7.139076120827840 3.492279542867630 2008-Mar-31 18:57:54 LOG4 log_alfabeam: ALFABEAM 6 7.138004521954051 3.597207674109726 2008-Mar-31 18:57:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100259 2008-Mar-31 18:57:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:57:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:57:55 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Mar-31 18:57:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:57:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:57:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:57:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:57:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82676.00 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:57:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:58:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:58:06 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Mar-31 18:58:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:58:06 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Mar-31 18:58:06 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Mar-31 18:58:06 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Mar-31 18:58:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Mar-31 18:58:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:58:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:58:06 LOG2 antvel: Parameters to Doppler: Topocentric 82686 2008 91 0.0 2008-Mar-31 18:58:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:58:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Mar-31 18:58:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Mar-31 18:58:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:58:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:58:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:58:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:58:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:58:06 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Mar-31 18:58:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:58:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.163432 2008.2513082743935 18.999933 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333346 3.528333333333332 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 1 7.132326366107820 3.633398329176618 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 2 7.127625035284940 3.565141065758612 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 3 7.128605936544487 3.460007648053002 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 4 7.134356163005772 3.423282966588331 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 5 7.139068284121198 3.492001051124281 2008-Mar-31 18:58:06 LOG4 log_alfabeam: ALFABEAM 6 7.138019409567815 3.596980635405924 2008-Mar-31 18:58:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100260 2008-Mar-31 18:58:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:58:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:58:07 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Mar-31 18:58:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:58:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:58:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82688.00 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:58:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:58:18 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Mar-31 18:58:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:58:18 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Mar-31 18:58:18 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Mar-31 18:58:18 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Mar-31 18:58:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Mar-31 18:58:18 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:58:18 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:58:18 LOG2 antvel: Parameters to Doppler: Topocentric 82698 2008 91 0.0 2008-Mar-31 18:58:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:58:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Mar-31 18:58:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Mar-31 18:58:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:58:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:58:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:58:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:58:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:58:18 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Mar-31 18:58:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:58:18 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.166775 2008.2513086546508 18.999933 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333333 3.528333333333331 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 1 7.132349121370901 3.633446645877989 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 2 7.127633032989939 3.565417882777662 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 3 7.128591170153366 3.460237419330416 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 4 7.134333414568602 3.423233878679051 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 5 7.139060385853982 3.491722897668986 2008-Mar-31 18:58:18 LOG4 log_alfabeam: ALFABEAM 6 7.138034250350684 3.596752840123002 2008-Mar-31 18:58:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100261 2008-Mar-31 18:58:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:58:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:58:19 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Mar-31 18:58:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:58:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:58:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82700.00 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:58:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:58:30 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Mar-31 18:58:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:58:30 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Mar-31 18:58:30 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Mar-31 18:58:30 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Mar-31 18:58:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Mar-31 18:58:30 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:58:30 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:58:30 LOG2 antvel: Parameters to Doppler: Topocentric 82710 2008 91 0.0 2008-Mar-31 18:58:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:58:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Mar-31 18:58:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Mar-31 18:58:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:58:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:58:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:58:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:58:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:58:30 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Mar-31 18:58:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:58:30 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.170117 2008.2513090349078 18.999933 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333391 3.528333333333329 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 1 7.132371876093549 3.633493835826086 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 2 7.127641086600268 3.565694176591425 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 3 7.128576460777549 3.460467794617798 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 4 7.134310666324529 3.423185917474890 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 5 7.139052431038047 3.491445257856402 2008-Mar-31 18:58:30 LOG4 log_alfabeam: ALFABEAM 6 7.138049034960552 3.596524432323696 2008-Mar-31 18:58:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100262 2008-Mar-31 18:58:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:58:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:58:31 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Mar-31 18:58:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:58:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:58:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82712.00 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:58:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:58:42 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Mar-31 18:58:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:58:42 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Mar-31 18:58:42 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Mar-31 18:58:42 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Mar-31 18:58:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Mar-31 18:58:42 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:58:42 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:58:42 LOG2 antvel: Parameters to Doppler: Topocentric 82722 2008 91 0.0 2008-Mar-31 18:58:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:58:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Mar-31 18:58:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Mar-31 18:58:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:58:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:58:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:58:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Mar-31 18:58:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:58:42 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Mar-31 18:58:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:58:42 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.173460 2008.2513094151648 18.999933 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333369 3.528333333333335 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 1 7.132394643142316 3.633539926345708 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 2 7.127649200636928 3.565970103740585 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 3 7.128561800066521 3.460698903805972 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 4 7.134287905410620 3.423139055241458 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 5 7.139044415205354 3.491167974436042 2008-Mar-31 18:58:42 LOG4 log_alfabeam: ALFABEAM 6 7.138063771787515 3.596295283166709 2008-Mar-31 18:58:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100263 2008-Mar-31 18:58:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:58:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:58:43 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Mar-31 18:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:58:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 18:58:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82724.00 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:58:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:58:54 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Mar-31 18:58:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:58:54 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Mar-31 18:58:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Mar-31 18:58:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 18:58:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 18:58:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 18:58:54 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Mar-31 18:58:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 18:58:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 18:58:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 18:58:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 18:58:54 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Mar-31 18:58:54 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Mar-31 18:58:54 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Mar-31 18:58:54 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Mar-31 18:58:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:58:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:58:54 LOG2 antvel: Parameters to Doppler: Topocentric 82734 2008 91 0.0 2008-Mar-31 18:58:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:58:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Mar-31 18:58:54 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Mar-31 18:58:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:58:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:58:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:58:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:58:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:58:54 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Mar-31 18:58:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:58:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.176802 2008.2513097954218 18.999933 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333367 3.528333333333331 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 1 7.132417408145869 3.633584889058557 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 2 7.127657369941271 3.566245490395186 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 3 7.128547197238208 3.460930600596171 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 4 7.134265146194552 3.423093320870643 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 5 7.139036343449488 3.490891222146125 2008-Mar-31 18:58:54 LOG4 log_alfabeam: ALFABEAM 6 7.138078451562501 3.596065537651426 2008-Mar-31 18:58:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100264 2008-Mar-31 18:58:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:58:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:58:55 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Mar-31 18:58:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:58:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Mar-31 18:58:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:58:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82736.00 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:58:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-Mar-31 18:58:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.282 1.385 1.489 1.406 2008-Mar-31 18:58:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.361 1.276 1.325 1.401 2008-Mar-31 18:58:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.324 1.410 1.506 2008-Mar-31 18:58:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.365 1.418 1.483 1.253 2008-Mar-31 18:58:59 INFO5 check_wapp_levels: WAPP power levels are between 1.253 and 1.504 (still bad) 2008-Mar-31 18:59:01 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.504 (still bad) 2008-Mar-31 18:59:03 INFO5 check_wapp_levels: WAPP power levels are between 1.250 and 1.504 (still bad) 2008-Mar-31 18:59:05 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.505 (still bad) 2008-Mar-31 18:59:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:59:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:59:06 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Mar-31 18:59:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:59:06 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Mar-31 18:59:06 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Mar-31 18:59:06 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Mar-31 18:59:06 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Mar-31 18:59:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:59:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:59:06 LOG2 antvel: Parameters to Doppler: Topocentric 82746 2008 91 0.0 2008-Mar-31 18:59:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:59:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Mar-31 18:59:06 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Mar-31 18:59:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:59:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:59:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:59:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:59:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:59:06 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Mar-31 18:59:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:59:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.180144 2008.2513101756788 18.999933 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333373 3.528333333333334 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 1 7.132440177163097 3.633628737225939 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 2 7.127665596622244 3.566520410462772 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 3 7.128532648340093 3.461162945929267 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 4 7.134242382619306 3.423048700922176 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 5 7.139028213685142 3.490614926772974 2008-Mar-31 18:59:06 LOG4 log_alfabeam: ALFABEAM 6 7.138093078255045 3.595835135299044 2008-Mar-31 18:59:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100265 2008-Mar-31 18:59:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:59:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:59:07 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Mar-31 18:59:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:59:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Mar-31 18:59:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82748.00 2008-Mar-31 18:59:08 INFO5 check_wapp_levels: WAPP power levels are between 1.250 and 1.504 (still bad) 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:10 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.491 (still bad) 2008-Mar-31 18:59:12 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.490 (still bad) 2008-Mar-31 18:59:14 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.491 (still bad) 2008-Mar-31 18:59:16 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.490 (still bad) 2008-Mar-31 18:59:18 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.489 (still bad) 2008-Mar-31 18:59:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:59:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:59:18 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Mar-31 18:59:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:59:18 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Mar-31 18:59:18 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Mar-31 18:59:18 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Mar-31 18:59:18 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Mar-31 18:59:18 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:59:18 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:59:18 LOG2 antvel: Parameters to Doppler: Topocentric 82758 2008 91 0.0 2008-Mar-31 18:59:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:59:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Mar-31 18:59:18 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Mar-31 18:59:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:59:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:59:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:59:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:18 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:59:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:59:18 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Mar-31 18:59:18 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:59:18 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.183487 2008.251310555936 18.999933 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333320 3.528333333333334 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 1 7.132462956257764 3.633671482886569 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 2 7.127673882851617 3.566794937345022 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 3 7.128518149478442 3.461396001463674 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 4 7.134219608622047 3.423005183178301 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 5 7.139020023762648 3.490339014598369 2008-Mar-31 18:59:18 LOG4 log_alfabeam: ALFABEAM 6 7.138107655776319 3.595604014904447 2008-Mar-31 18:59:18 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100266 2008-Mar-31 18:59:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:59:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:59:19 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Mar-31 18:59:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:59:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Mar-31 18:59:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82760.00 2008-Mar-31 18:59:20 INFO5 check_wapp_levels: WAPP power levels are between 1.252 and 1.492 (still bad) 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:22 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.490 (still bad) 2008-Mar-31 18:59:24 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.488 (still bad) 2008-Mar-31 18:59:26 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.489 (still bad) 2008-Mar-31 18:59:28 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.490 (still bad) 2008-Mar-31 18:59:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:59:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:59:30 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Mar-31 18:59:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:59:30 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Mar-31 18:59:30 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Mar-31 18:59:30 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Mar-31 18:59:30 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Mar-31 18:59:30 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:59:30 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:59:30 LOG2 antvel: Parameters to Doppler: Topocentric 82770 2008 91 0.0 2008-Mar-31 18:59:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:59:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Mar-31 18:59:30 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Mar-31 18:59:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:59:30 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:59:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:59:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:30 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:59:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:59:30 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Mar-31 18:59:30 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:59:30 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.186829 2008.251310936193 18.999933 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333394 3.528333333333340 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 1 7.132485731051824 3.633713099997310 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 2 7.127682223351705 3.567068898207541 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 3 7.128503709757374 3.461629619559922 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 4 7.134196838578222 3.422962794195818 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 5 7.139011778896713 3.490063659385804 2008-Mar-31 18:59:30 LOG4 log_alfabeam: ALFABEAM 6 7.138122174969713 3.595372322826242 2008-Mar-31 18:59:30 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100267 2008-Mar-31 18:59:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:59:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:59:31 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Mar-31 18:59:31 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.488 (still bad) 2008-Mar-31 18:59:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:59:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Mar-31 18:59:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82772.00 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:33 INFO5 check_wapp_levels: WAPP power levels are between 1.250 and 1.488 (still bad) 2008-Mar-31 18:59:35 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.482 (still bad) 2008-Mar-31 18:59:37 INFO5 check_wapp_levels: WAPP power levels are between 1.248 and 1.483 (still bad) 2008-Mar-31 18:59:39 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.483 (still bad) 2008-Mar-31 18:59:41 INFO5 check_wapp_levels: WAPP power levels are between 1.250 and 1.482 (still bad) 2008-Mar-31 18:59:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:59:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:59:42 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Mar-31 18:59:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:59:42 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Mar-31 18:59:42 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Mar-31 18:59:42 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Mar-31 18:59:42 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Mar-31 18:59:42 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:59:42 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:59:42 LOG2 antvel: Parameters to Doppler: Topocentric 82782 2008 91 0.0 2008-Mar-31 18:59:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:59:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Mar-31 18:59:42 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Mar-31 18:59:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:59:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:59:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:59:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:42 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:59:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:59:42 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Mar-31 18:59:42 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:59:42 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.190172 2008.25131131645 18.999933 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333379 3.528333333333338 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 1 7.132508514424162 3.633753613104941 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 2 7.127690622787321 3.567342448458050 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 3 7.128489320959320 3.461863931755707 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 4 7.134174059611447 3.422921509017794 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 5 7.139003474473498 3.489788704994770 2008-Mar-31 18:59:42 LOG4 log_alfabeam: ALFABEAM 6 7.138136644093997 3.595139928557495 2008-Mar-31 18:59:42 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100268 2008-Mar-31 18:59:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:59:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:59:43 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Mar-31 18:59:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:59:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Mar-31 18:59:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:43 INFO5 check_wapp_levels: WAPP power levels are between 1.251 and 1.482 (still bad) 2008-Mar-31 18:59:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82784.00 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:45 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.469 (still bad) 2008-Mar-31 18:59:47 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.468 (still bad) 2008-Mar-31 18:59:49 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.468 (still bad) 2008-Mar-31 18:59:51 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.469 (still bad) 2008-Mar-31 18:59:53 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.470 (still bad) 2008-Mar-31 18:59:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 18:59:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 18:59:54 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Mar-31 18:59:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 18:59:54 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Mar-31 18:59:54 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Mar-31 18:59:54 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Mar-31 18:59:54 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Mar-31 18:59:54 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 18:59:54 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 18:59:54 LOG2 antvel: Parameters to Doppler: Topocentric 82794 2008 91 0.0 2008-Mar-31 18:59:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 18:59:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Mar-31 18:59:54 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Mar-31 18:59:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 18:59:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 18:59:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:59:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:54 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 18:59:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 18:59:54 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Mar-31 18:59:54 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 18:59:54 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.193514 2008.251311696707 18.999933 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333391 3.528333333333337 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 1 7.132531291994734 3.633792997724473 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 2 7.127699075802149 3.567615415958409 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 3 7.128474992110665 3.462098789549402 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 4 7.134151286099136 3.422881352642897 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 5 7.138995115786744 3.489514324506064 2008-Mar-31 18:59:54 LOG4 log_alfabeam: ALFABEAM 6 7.138151054068680 3.594906979331872 2008-Mar-31 18:59:54 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100269 2008-Mar-31 18:59:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 18:59:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 18:59:55 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Mar-31 18:59:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 18:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Mar-31 18:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 18:59:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 18:59:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82796.00 2008-Mar-31 18:59:56 INFO5 check_wapp_levels: WAPP power levels are between 1.240 and 1.468 (still bad) 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 18:59:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.467 > 1.4)! 2008-Mar-31 18:59:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.351 1.428 1.384 2008-Mar-31 18:59:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.341 1.240 1.264 1.377 2008-Mar-31 18:59:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.234 1.298 1.320 1.454 2008-Mar-31 18:59:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.351 1.407 1.467 1.243 2008-Mar-31 19:00:00 INFO5 check_wapp_levels: WAPP power levels are between 1.235 and 1.467 (still bad) 2008-Mar-31 19:00:02 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.468 (still bad) 2008-Mar-31 19:00:04 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.467 (still bad) 2008-Mar-31 19:00:06 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.468 (still bad) 2008-Mar-31 19:00:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:00:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 19:00:06 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Mar-31 19:00:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 19:00:06 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Mar-31 19:00:06 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Mar-31 19:00:06 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Mar-31 19:00:06 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Mar-31 19:00:06 LOG2 antvel: Precessing RA = 07:08:00.0 Dec = +03:31:42.0 Epoch = 2008.25131 J 2008-Mar-31 19:00:06 LOG2 antvel: Computed apparent RA = 07:08:26.7 Dec = +03:30:53.4 2008-Mar-31 19:00:06 LOG2 antvel: Parameters to Doppler: Topocentric 82806 2008 91 0.0 2008-Mar-31 19:00:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 19:00:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Mar-31 19:00:06 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Mar-31 19:00:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 19:00:06 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 19:00:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 19:00:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:00:06 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Mar-31 19:00:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Mar-31 19:00:06 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Mar-31 19:00:06 INFO3 take_spectra: Starting take_spectra 10 1 2008-Mar-31 19:00:06 LOG5 log_alfabeam: Parameters: 7.1333333333333337 3.5283333333333333 7.196857 2008.251312076964 18.999933 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 0 7.133333333333375 3.528333333333333 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 1 7.132554076645664 3.633831277288908 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 2 7.127707587118129 3.567887955636440 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 3 7.128460715048615 3.462334325113031 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 4 7.134128505161927 3.422842301227841 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 5 7.138986698165446 3.489240362250081 2008-Mar-31 19:00:06 LOG4 log_alfabeam: ALFABEAM 6 7.138165413098840 3.594673344000202 2008-Mar-31 19:00:06 INFO2 take_spectra: Starting WAPP+GALFA scan: 809100270 2008-Mar-31 19:00:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Mar-31 19:00:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Mar-31 19:00:07 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Mar-31 19:00:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:00:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Mar-31 19:00:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82808.00 2008-Mar-31 19:00:08 INFO5 check_wapp_levels: WAPP power levels are between 1.236 and 1.468 (still bad) 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:00:10 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.465 (still bad) 2008-Mar-31 19:00:12 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.466 (still bad) 2008-Mar-31 19:00:14 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.466 (still bad) 2008-Mar-31 19:00:16 INFO5 check_wapp_levels: WAPP power levels are between 1.229 and 1.467 (still bad) 2008-Mar-31 19:00:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:00:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Mar-31 19:00:18 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Mar-31 19:00:18 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 INFO2 smartfreq: Switching off CAL 2008-Mar-31 19:00:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:00:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:00:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:00:18 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 INFO5 check_wapp_levels: WAPP power levels are between 1.230 and 1.466 (still bad) 2008-Mar-31 19:00:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:00:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:00:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:00:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:00:18 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 STOP finish_task: Finishing task 'smart frequency switching' 2008-Mar-31 19:00:18 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Mar-31 19:00:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:00:18 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Mar-31 19:00:18 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 WARNING smartfreq: WARNING smart frequency switching changes the frequency settings! 2008-Mar-31 19:00:18 ALERT smartfreq: Don't forget to set new frequencies! 2008-Mar-31 19:00:18 NOTE run_command_file: DONE with command file processing 2008-Mar-31 19:00:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Mar-31 19:00:18 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Mar-31 19:00:18 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Mar-31 19:00:18 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Mar-31 19:00:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:00:18 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Mar-31 19:00:19 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Mar-31 19:00:32 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Mar-31 19:00:32 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Mar-31 19:00:32 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Mar-31 19:00:32 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Mar-31 19:00:32 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Mar-31 19:00:32 NOTE restart_wapp: Restarting all WAPPs 2008-Mar-31 19:00:32 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Mar-31 19:00:32 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Mar-31 19:00:32 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2008-Mar-31 19:00:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Mar-31 19:00:33 LOG3 exec_msg: Closing socket 2008-Mar-31 19:00:33 LOG3 exec_msg: Closing socket 2008-Mar-31 19:00:33 LOG3 exec_msg: Closing socket 2008-Mar-31 19:00:33 LOG3 exec_msg: Closing socket 2008-Mar-31 19:00:35 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Mar-31 19:00:35 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Mar-31 19:00:35 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Mar-31 19:00:36 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Mar-31 19:00:51 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Mar-31 19:00:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Mar-31 19:00:53 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Mar-31 19:00:53 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Mar-31 19:00:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Mar-31 19:00:53 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Mar-31 19:00:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Mar-31 19:00:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Mar-31 19:00:53 LOG1 config_iflo: Receiver ALFA already selected 2008-Mar-31 19:00:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:00:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:00:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:00:53 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Mar-31 19:00:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:00:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:00:53 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Mar-31 19:00:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:00:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:00:53 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Mar-31 19:00:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Mar-31 19:00:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Mar-31 19:00:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Mar-31 19:00:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Mar-31 19:00:53 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Mar-31 19:00:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Mar-31 19:00:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:00:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Mar-31 19:00:53 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Mar-31 19:00:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 19:00:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Mar-31 19:00:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:00:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Mar-31 19:00:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Mar-31 19:00:54 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Mar-31 19:00:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Mar-31 19:00:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Mar-31 19:00:54 LOG5 finish_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Mar-31 19:00:54 DONE finish_task: DONE finished configuration: IF/LO path 2008-Mar-31 19:00:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:00:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Mar-31 19:00:54 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Mar-31 19:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Mar-31 19:00:54 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Mar-31 19:00:54 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Mar-31 19:00:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Mar-31 19:00:54 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Mar-31 19:00:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Mar-31 19:00:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Mar-31 19:00:54 START begin_task: Starting task 'selecting calibration port' 2008-Mar-31 19:00:54 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG3 vw_send: To DATATAKING: calport 3 2008-Mar-31 19:00:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Mar-31 19:00:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:00:55 START begin_task: Starting task 'waiting on calport' 2008-Mar-31 19:00:55 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Mar-31 19:00:55 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Mar-31 19:00:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:00:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:00:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Mar-31 19:00:55 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Mar-31 19:00:55 STOP finish_task: Finishing task 'selecting calibration port' 2008-Mar-31 19:00:55 LOG5 finish_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 INFO2 finish_task: DONE finished configuring: calibration port 2008-Mar-31 19:00:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:00:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Mar-31 19:00:55 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:00:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:00:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Mar-31 19:00:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Mar-31 19:00:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:00:55 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Mar-31 19:00:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:00:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:00:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Mar-31 19:00:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:00:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:00:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:00:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:00:55 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Mar-31 19:00:55 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Mar-31 19:00:55 LOG5 finish_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Mar-31 19:00:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:00:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Mar-31 19:00:55 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2008-Mar-31 19:00:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Mar-31 19:00:56 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Mar-31 19:00:56 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Mar-31 19:00:56 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Mar-31 19:00:56 LOG5 begin_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2008-Mar-31 19:00:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Mar-31 19:00:56 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Mar-31 19:00:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Mar-31 19:00:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Mar-31 19:00:56 LOG5 finish_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2008-Mar-31 19:00:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Mar-31 19:00:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:00:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Mar-31 19:00:56 LOG5 end_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2008-Mar-31 19:00:56 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Mar-31 19:00:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Mar-31 19:00:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Mar-31 19:01:47 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Mar-31 19:01:47 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Mar-31 19:01:47 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 19:01:47 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2008-Mar-31 19:01:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Mar-31 19:01:47 INFO2 adjust_power: Starting to adjust WAPP power 2008-Mar-31 19:01:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Mar-31 19:01:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Mar-31 19:01:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:01:47 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Mar-31 19:01:47 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Mar-31 19:01:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Mar-31 19:01:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:01:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:01:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:01:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Mar-31 19:01:50 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Mar-31 19:01:51 START begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 19:01:51 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Mar-31 19:01:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:01:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:01:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:01:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:01:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Mar-31 19:01:51 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Mar-31 19:01:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:01:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Mar-31 19:01:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Mar-31 19:01:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Mar-31 19:01:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Mar-31 19:01:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Mar-31 19:01:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Mar-31 19:01:51 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.889 1.008 ALFA beam 1: 1.080 1.038 2008-Mar-31 19:01:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.002 0.916 ALFA beam 3: 0.927 0.995 2008-Mar-31 19:01:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.889 0.924 ALFA beam 5: 0.963 1.094 2008-Mar-31 19:01:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.954 0.993 ALFA beam 7: 1.045 0.878 2008-Mar-31 19:01:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 19:01:51 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Mar-31 19:01:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:01:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 19:01:51 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Mar-31 19:01:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 19:01:51 LOG5 finish_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2008-Mar-31 19:01:51 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Mar-31 19:01:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Mar-31 19:01:51 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 19:01:51 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2008-Mar-31 19:01:53 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Mar-31 19:01:53 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Mar-31 19:01:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:01:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:01:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:01:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:01:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0030.fits 2008-Mar-31 19:01:54 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080331.a2010.0030.fits} 2008-Mar-31 19:02:00 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Mar-31 19:02:00 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift15p1 071500.0 +033142 J 0 Topocentric velocity(optical) 2008-Mar-31 19:02:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift15p1 071500.0 +033142 J 0 Topocentric velocity(optical)' 2008-Mar-31 19:02:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Mar-31 19:02:00 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2008-Mar-31 19:02:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Mar-31 19:02:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift15p1} 2008-Mar-31 19:02:00 INFO5 fixed_driftmap: Start: year = 2008.2513156577181 RA = 07:15:26.7 Dec = +03:30:48.4 2008-Mar-31 19:02:00 NOTE fixed_driftmap: Setting ZA to 14:50:25.3 ... 2008-Mar-31 19:02:00 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 14.84 2008-Mar-31 19:02:00 LOG3 track_source: Calling 'track_source drift15p1 360.0 14.8403725625 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Mar-31 19:02:00 START begin_task: Starting task 'sending tracking commands' 2008-Mar-31 19:02:00 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift15p1} INFO {Slewing to source 'drift15p1' ...} 2008-Mar-31 19:02:00 INFO1 track_source: Starting to track drift15p1 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift15p1" 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: set dec 14.8403725625 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: pnt tr 360.0 14.8403725625 -CF 2008-Mar-31 19:02:00 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Mar-31 19:02:00 STOP finish_task: Finishing task 'sending tracking commands' 2008-Mar-31 19:02:00 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 INFO2 finish_task: DONE finished sending: tracking commands 2008-Mar-31 19:02:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Mar-31 19:02:00 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Mar-31 19:02:00 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Mar-31 19:02:00 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Mar-31 19:02:00 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Mar-31 19:02:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Mar-31 19:02:00 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Mar-31 19:02:00 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift15p1" 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: set dec 14.8403725625 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 14.8403725625 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 14.8403725625 -CF 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Mar-31 19:02:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Mar-31 19:02:01 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Mar-31 19:02:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Mar-31 19:02:01 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Mar-31 19:02:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Mar-31 19:02:01 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Mar-31 19:02:01 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Mar-31 19:02:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Mar-31 19:02:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:01 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Mar-31 19:02:01 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2008-Mar-31 19:02:01 START begin_task: Starting task 'waiting on telescope' 2008-Mar-31 19:02:01 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Mar-31 19:02:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Mar-31 19:02:01 LOG3 waittrk: Start waittrk 5 2008-Mar-31 19:02:01 START begin_task: Starting task 'waiting on telescope movement' 2008-Mar-31 19:02:01 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Mar-31 19:02:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Mar-31 19:02:06 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Mar-31 19:02:06 START begin_task: Starting task 'waiting on telescope on source' 2008-Mar-31 19:02:06 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Mar-31 19:02:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Mar-31 19:02:28 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Mar-31 19:02:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Mar-31 19:02:28 INFO2 waittrk: Now tracking drift15p1 2008-Mar-31 19:02:28 LOG4 waittrk: Current telescope position: Az = 359.65 ZA = 14.81 2008-Mar-31 19:02:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Mar-31 19:02:28 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Mar-31 19:02:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Mar-31 19:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Mar-31 19:02:29 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:02:29 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:02:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:02:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:02:29 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:02:29 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:02:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:02:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:02:29 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:02:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:02:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:02:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:02:29 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:02:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:02:29 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:02:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:02:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:02:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:02:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:02:29 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:02:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:02:29 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:02:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:02:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:02:29 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 INFO2 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:02:29 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Mar-31 19:02:29 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2008-Mar-31 19:02:29 INFO2 astwait: Waiting for 14 seconds from 23:02:29 to 23:02:43 UTC ... 2008-Mar-31 19:02:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Mar-31 19:02:29 START begin_task: Starting task 'waiting on waiting for AST time' 2008-Mar-31 19:02:29 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Mar-31 19:02:43 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2008-Mar-31 19:02:43 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2008-Mar-31 19:02:43 INFO3 astwait: Finished waiting 2008-Mar-31 19:02:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Mar-31 19:02:43 LOG5 dopset_later: Calling 'dopset_later 61.45882227652266' 2008-Mar-31 19:02:43 INFO3 dopset_later: Setting Doppler correction for 19:03:43 (61.5 seconds from now) 2008-Mar-31 19:02:43 LOG2 antvel: Parameters to Doppler: Topocentric 83023 2008 91 0.0 2008-Mar-31 19:02:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Mar-31 19:02:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Mar-31 19:02:43 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Mar-31 19:02:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Mar-31 19:02:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Mar-31 19:02:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 19:02:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:02:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 19:02:43 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Mar-31 19:02:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Mar-31 19:02:43 INFO2 adjust_power: Starting to adjust WAPP power 2008-Mar-31 19:02:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Mar-31 19:02:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Mar-31 19:02:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:02:43 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Mar-31 19:02:43 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:02:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Mar-31 19:02:46 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Mar-31 19:02:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Mar-31 19:02:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Mar-31 19:02:46 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Mar-31 19:02:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Mar-31 19:02:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:02:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:02:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:02:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Mar-31 19:02:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Mar-31 19:02:46 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2008-Mar-31 19:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:02:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Mar-31 19:02:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Mar-31 19:02:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Mar-31 19:02:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Mar-31 19:02:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Mar-31 19:02:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Mar-31 19:02:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Mar-31 19:02:47 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.906 1.004 ALFA beam 1: 1.075 1.032 2008-Mar-31 19:02:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.001 0.916 ALFA beam 3: 0.926 1.011 2008-Mar-31 19:02:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.899 0.932 ALFA beam 5: 0.968 1.089 2008-Mar-31 19:02:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.972 1.012 ALFA beam 7: 1.056 0.895 2008-Mar-31 19:02:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 19:02:47 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Mar-31 19:02:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 19:02:47 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:02:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Mar-31 19:02:47 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Mar-31 19:02:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:02:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Mar-31 19:02:47 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:02:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:02:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:02:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:02:47 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080331.a2010.0030.fits' is empty! 2008-Mar-31 19:02:47 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 07:15:26.7 LST = 07:14:29.1 diff = 57.6 secs 2008-Mar-31 19:02:47 INFO2 fixed_driftmap: Waiting 55.6 seconds for RA 7:15:27 2008-Mar-31 19:02:47 INFO2 lstwait: Waiting for 55.5 secs from LST 07:14:29 to LST 07:15:25 ... 2008-Mar-31 19:02:47 LOG4 send_obs_status: To obs_status: <1> TASKTIME 55.464833072681337 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Mar-31 19:02:47 START begin_task: Starting task 'waiting on wait on LST' 2008-Mar-31 19:02:47 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Mar-31 19:02:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:03:43 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Mar-31 19:03:43 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2008-Mar-31 19:03:43 LOG4 lstwait: Finished waiting, the gui caused difference: 0.53611111999991579 2008-Mar-31 19:03:43 INFO3 lstwait: Finished waiting 2008-Mar-31 19:03:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Mar-31 19:03:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Mar-31 19:03:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Mar-31 19:03:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:03:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:03:43 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:03:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:03:43 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Mar-31 19:03:43 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:03:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:03:43 INFO2 take_spectra: Starting WAPP scan: 809100271 2008-Mar-31 19:03:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:03:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:03:43 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Mar-31 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:03:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83024.00 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:13:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:13:44 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Mar-31 19:13:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:13:44 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2008-Mar-31 19:13:44 LOG1 fixed_driftmap: New position: year = 2008.25133799782 RA = 07:25:02.7 RA/Dec = 07:25:29.5 +03:30:41.3 2008-Mar-31 19:13:44 NOTE fixed_driftmap: Correcting ZA to 14:50:32.4 ... 2008-Mar-31 19:13:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8423418804 -CF 2008-Mar-31 19:13:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 19:13:44 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 19:13:44 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Mar-31 19:13:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 19:13:44 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 19:13:44 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:13:44 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Mar-31 19:13:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:13:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:13:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:13:44 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:13:44 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8423418804 -CF 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:13:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:13:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:13:44 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:13:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:13:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:13:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:13:45 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:13:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:13:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:13:45 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:13:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:13:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:13:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:13:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:13:45 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:13:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:13:45 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:13:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:13:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:13:45 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:13:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:13:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:13:45 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 19:13:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 19:13:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 19:13:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:13:45 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:13:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 19:13:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:13:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:13:45 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 19:13:45 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 19:13:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:13:45 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 19:13:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:13:45 INFO2 take_spectra: Starting WAPP scan: 809100272 2008-Mar-31 19:13:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 19:13:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:13:45 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Mar-31 19:13:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:13:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83626.00 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:13:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:13:47 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:13:47 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 19:13:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:13:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:13:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:13:47 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.470 > 1.4)! 2008-Mar-31 19:13:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.236 1.356 1.432 1.388 2008-Mar-31 19:13:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.332 1.240 1.283 1.384 2008-Mar-31 19:13:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.252 1.303 1.334 1.467 2008-Mar-31 19:13:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.352 1.403 1.470 1.239 2008-Mar-31 19:13:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:13:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:13:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:13:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:13:47 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:13:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 19:13:47 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 19:13:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:13:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 19:13:47 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2008-Mar-31 19:13:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Mar-31 19:13:48 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Mar-31 19:13:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:13:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:13:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:13:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:13:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:13:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:13:48 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:13:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:13:48 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2008-Mar-31 19:13:48 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:13:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:13:48 INFO2 take_spectra: Starting WAPP scan: 809100273 2008-Mar-31 19:13:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:13:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:13:48 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Mar-31 19:13:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:13:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:13:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0031.fits 2008-Mar-31 19:13:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0031.fits} 2008-Mar-31 19:13:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83629.00 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:13:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.101 2008-Mar-31 19:18:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.829 > 1.4)! 2008-Mar-31 19:18:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.188 1.198 1.136 2008-Mar-31 19:18:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 1.379 1.227 1.142 2008-Mar-31 19:18:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.440 1.829 1.415 1.256 2008-Mar-31 19:18:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.148 1.222 1.228 1.053 2008-Mar-31 19:18:34 INFO5 check_wapp_levels: WAPP power levels are between 1.080 and 2.188 (still bad) 2008-Mar-31 19:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 2.227 (still bad) 2008-Mar-31 19:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.950 and 2.187 (still bad) 2008-Mar-31 19:18:40 INFO5 check_wapp_levels: WAPP power levels are between 1.049 and 1.814 (still bad) 2008-Mar-31 19:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 1.738 (still bad) 2008-Mar-31 19:18:44 INFO5 check_wapp_levels: WAPP power levels are between 1.090 and 1.841 (still bad) 2008-Mar-31 19:18:46 INFO5 check_wapp_levels: WAPP power levels are between 1.031 and 1.993 (still bad) 2008-Mar-31 19:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.956 and 2.095 (still bad) 2008-Mar-31 19:18:50 INFO5 check_wapp_levels: WAPP power levels are between 1.030 and 2.046 (still bad) 2008-Mar-31 19:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.992 and 2.072 (still bad) 2008-Mar-31 19:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.986 and 1.920 (still bad) 2008-Mar-31 19:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.994 and 2.017 (still bad) 2008-Mar-31 19:18:58 INFO5 check_wapp_levels: WAPP power levels are between 1.016 and 1.705 (still bad) 2008-Mar-31 19:19:00 INFO5 check_wapp_levels: WAPP power levels are between 1.064 and 1.701 (still bad) 2008-Mar-31 19:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.985 and 1.864 (still bad) 2008-Mar-31 19:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.997 and 1.963 (still bad) 2008-Mar-31 19:19:06 INFO5 check_wapp_levels: WAPP power levels are between 1.065 and 1.879 (still bad) 2008-Mar-31 19:19:08 INFO5 check_wapp_levels: WAPP power levels are between 1.047 and 1.929 (still bad) 2008-Mar-31 19:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.988 and 1.814 (still bad) 2008-Mar-31 19:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.765 (still bad) 2008-Mar-31 19:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.916 and 1.531 (still bad) 2008-Mar-31 19:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.934 and 1.692 (still bad) 2008-Mar-31 19:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.932 and 1.832 (still bad) 2008-Mar-31 19:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.920 and 1.844 (still bad) 2008-Mar-31 19:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.924 and 1.663 (still bad) 2008-Mar-31 19:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.945 and 1.486 (still bad) 2008-Mar-31 19:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.968 and 1.717 (still bad) 2008-Mar-31 19:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.968 and 1.960 (still bad) 2008-Mar-31 19:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.948 and 1.871 (still bad) 2008-Mar-31 19:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.937 and 1.549 (still bad) 2008-Mar-31 19:19:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.424 > 1.4)! 2008-Mar-31 19:19:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.064 1.285 1.424 2008-Mar-31 19:19:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.966 0.975 1.140 2008-Mar-31 19:19:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.056 1.101 1.142 2008-Mar-31 19:19:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.186 1.171 1.267 1.014 2008-Mar-31 19:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.977 and 1.447 (still bad) 2008-Mar-31 19:19:40 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.094 2008-Mar-31 19:23:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:23:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:23:49 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Mar-31 19:23:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:23:49 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2008-Mar-31 19:23:49 LOG1 fixed_driftmap: New position: year = 2008.2513571691131 RA = 07:35:09.3 RA/Dec = 07:35:36.2 +03:30:34.2 2008-Mar-31 19:23:49 NOTE fixed_driftmap: Correcting ZA to 14:50:39.5 ... 2008-Mar-31 19:23:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8442954965 -CF 2008-Mar-31 19:23:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 19:23:49 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 19:23:49 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Mar-31 19:23:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 19:23:49 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 19:23:49 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:23:49 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Mar-31 19:23:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:23:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:23:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:23:49 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:23:49 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Mar-31 19:23:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8442954965 -CF 2008-Mar-31 19:23:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:23:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:23:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:23:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:23:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:23:50 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:23:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:23:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:23:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:23:50 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:23:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:23:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:23:50 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:23:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:23:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:23:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:23:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:23:50 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:23:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:23:50 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:23:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:23:50 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:23:50 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:23:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:23:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:23:50 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 19:23:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 19:23:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 19:23:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:23:50 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:23:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 19:23:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:23:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:23:50 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 19:23:50 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 19:23:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:23:50 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Mar-31 19:23:50 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 19:23:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:23:50 INFO2 take_spectra: Starting WAPP scan: 809100274 2008-Mar-31 19:23:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 19:23:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:23:51 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Mar-31 19:23:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:23:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84232.00 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.465 > 1.4)! 2008-Mar-31 19:23:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.234 1.365 1.435 1.394 2008-Mar-31 19:23:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.904 0.936 1.015 2008-Mar-31 19:23:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.248 1.307 1.329 1.465 2008-Mar-31 19:23:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 1.012 1.060 0.894 2008-Mar-31 19:23:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:23:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:23:53 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:23:53 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 19:23:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:23:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:23:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:23:53 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:23:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:23:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:23:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:23:53 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:23:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 19:23:53 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 19:23:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:23:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 19:23:53 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Mar-31 19:23:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Mar-31 19:23:53 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Mar-31 19:23:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:23:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:23:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:23:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:23:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:23:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:23:54 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:23:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:23:54 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Mar-31 19:23:54 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:23:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:23:54 INFO2 take_spectra: Starting WAPP scan: 809100275 2008-Mar-31 19:23:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:23:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:23:54 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Mar-31 19:23:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:23:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:23:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0032.fits 2008-Mar-31 19:23:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84235.00 2008-Mar-31 19:23:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0032.fits} 2008-Mar-31 19:23:55 INFO5 check_wapp_levels: WAPP power levels are between 1.234 and 1.480 (still bad) 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:23:57 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.092 2008-Mar-31 19:33:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:33:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:33:55 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:33:55 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 LOG1 fixed_driftmap: New position: year = 2008.2513763720942 RA = 07:45:16.9 RA/Dec = 07:45:43.8 +03:30:27.3 2008-Mar-31 19:33:55 NOTE fixed_driftmap: Correcting ZA to 14:50:46.4 ... 2008-Mar-31 19:33:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8462199536 -CF 2008-Mar-31 19:33:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 19:33:55 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 19:33:55 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 19:33:55 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 19:33:55 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:33:55 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:33:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:33:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:33:55 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:33:55 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8462199536 -CF 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:33:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:33:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:33:55 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2008-Mar-31 19:33:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:33:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:33:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:33:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:33:56 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:33:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:33:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:33:56 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:33:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:33:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:33:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:33:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:33:56 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:33:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:33:56 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:33:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:33:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:33:56 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:33:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:33:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:33:56 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 19:33:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 19:33:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 19:33:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:33:56 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:33:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 19:33:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:33:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:33:56 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 19:33:56 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 19:33:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:33:56 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 19:33:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:33:56 INFO2 take_spectra: Starting WAPP scan: 809100276 2008-Mar-31 19:33:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 19:33:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:33:56 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Mar-31 19:33:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:33:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84837.00 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:33:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:33:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:33:58 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:33:58 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 19:33:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:33:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:33:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:33:58 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.469 > 1.4)! 2008-Mar-31 19:33:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.223 1.372 1.438 1.398 2008-Mar-31 19:33:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.354 1.244 1.299 1.394 2008-Mar-31 19:33:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.253 1.312 1.335 1.469 2008-Mar-31 19:33:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 1.012 1.063 0.893 2008-Mar-31 19:33:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:33:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:33:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:33:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:33:58 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:33:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 19:33:58 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 19:33:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:33:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 19:33:58 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2008-Mar-31 19:33:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Mar-31 19:33:58 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Mar-31 19:33:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:33:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:33:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:33:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:33:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:33:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:33:59 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:33:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:33:59 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Mar-31 19:33:59 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:33:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:33:59 INFO2 take_spectra: Starting WAPP scan: 809100277 2008-Mar-31 19:33:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:33:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:33:59 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Mar-31 19:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:33:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84840.00 2008-Mar-31 19:33:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0033.fits 2008-Mar-31 19:33:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0033.fits} 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:34:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.098 2008-Mar-31 19:44:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:44:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:44:00 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:44:00 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 LOG1 fixed_driftmap: New position: year = 2008.2513955433874 RA = 07:55:23.6 RA/Dec = 07:55:50.5 +03:30:20.5 2008-Mar-31 19:44:00 NOTE fixed_driftmap: Correcting ZA to 14:50:53.2 ... 2008-Mar-31 19:44:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8481051337 -CF 2008-Mar-31 19:44:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 19:44:00 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 19:44:00 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 19:44:00 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 19:44:00 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:44:00 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:44:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:44:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:44:00 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:44:00 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8481051337 -CF 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:44:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:44:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:44:00 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2008-Mar-31 19:44:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:44:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:44:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:44:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:44:01 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:44:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:44:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:44:01 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:44:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:44:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:44:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:44:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:44:01 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:44:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:44:01 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:44:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:44:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:44:01 LOG5 finish_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:44:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:44:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:44:01 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 19:44:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 19:44:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 19:44:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:44:01 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:44:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 19:44:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:44:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:44:01 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 19:44:01 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 19:44:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:44:01 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 19:44:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:44:01 INFO2 take_spectra: Starting WAPP scan: 809100278 2008-Mar-31 19:44:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 19:44:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:44:01 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Mar-31 19:44:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:44:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85442.00 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:44:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:44:03 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:44:03 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 19:44:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:44:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:44:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:44:03 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:44:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:44:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:44:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:44:03 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:44:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 19:44:03 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 19:44:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:44:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 19:44:03 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2008-Mar-31 19:44:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Mar-31 19:44:03 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Mar-31 19:44:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:44:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:44:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:44:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:44:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:44:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:44:04 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:44:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:44:04 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2008-Mar-31 19:44:04 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:44:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:44:04 INFO2 take_spectra: Starting WAPP scan: 809100279 2008-Mar-31 19:44:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:44:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:44:04 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Mar-31 19:44:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:44:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.490 > 1.4)! 2008-Mar-31 19:44:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.219 1.371 1.446 1.406 2008-Mar-31 19:44:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.354 1.246 1.294 1.394 2008-Mar-31 19:44:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.257 1.321 1.329 1.466 2008-Mar-31 19:44:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.368 1.419 1.490 1.251 2008-Mar-31 19:44:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:44:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0034.fits 2008-Mar-31 19:44:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0034.fits} 2008-Mar-31 19:44:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85445.00 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 1.219 and 1.490 (still bad) 2008-Mar-31 19:44:08 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.091 2008-Mar-31 19:54:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:54:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:54:05 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:54:05 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 LOG1 fixed_driftmap: New position: year = 2008.2514147146805 RA = 08:05:30.2 RA/Dec = 08:05:57.1 +03:30:13.9 2008-Mar-31 19:54:05 NOTE fixed_driftmap: Correcting ZA to 14:50:59.8 ... 2008-Mar-31 19:54:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8499505878 -CF 2008-Mar-31 19:54:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 19:54:05 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 19:54:05 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 19:54:05 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 19:54:05 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 19:54:05 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 19:54:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 19:54:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:54:05 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 19:54:05 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8499505878 -CF 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:54:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 19:54:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 19:54:05 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2008-Mar-31 19:54:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 19:54:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:54:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 19:54:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:54:06 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 19:54:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:54:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:54:06 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:54:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 19:54:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 19:54:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:54:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 19:54:06 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 19:54:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 19:54:06 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 19:54:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 19:54:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 19:54:06 LOG5 finish_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 19:54:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:54:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 19:54:06 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 19:54:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 19:54:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 19:54:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:54:06 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:54:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 19:54:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:54:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:54:06 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 19:54:06 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 19:54:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:54:06 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 19:54:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:54:06 INFO2 take_spectra: Starting WAPP scan: 809100280 2008-Mar-31 19:54:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 19:54:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:54:06 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Mar-31 19:54:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:54:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86047.00 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 19:54:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 19:54:08 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 19:54:08 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 19:54:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 19:54:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 19:54:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 19:54:08 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 19:54:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 19:54:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 19:54:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 19:54:08 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 19:54:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 19:54:08 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 19:54:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 19:54:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 19:54:08 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Mar-31 19:54:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Mar-31 19:54:08 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Mar-31 19:54:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 19:54:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 19:54:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 19:54:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 19:54:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 19:54:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 19:54:09 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 19:54:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 19:54:09 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Mar-31 19:54:09 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 19:54:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 19:54:09 INFO2 take_spectra: Starting WAPP scan: 809100281 2008-Mar-31 19:54:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 19:54:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 19:54:09 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Mar-31 19:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 19:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 19:54:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0035.fits 2008-Mar-31 19:54:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86050.00 2008-Mar-31 19:54:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0035.fits} 2008-Mar-31 19:54:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.491 > 1.4)! 2008-Mar-31 19:54:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.222 1.379 1.449 1.411 2008-Mar-31 19:54:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.359 1.253 1.302 1.396 2008-Mar-31 19:54:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.259 1.323 1.340 1.474 2008-Mar-31 19:54:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.372 1.424 1.491 1.256 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 19:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 1.491 (still bad) 2008-Mar-31 19:54:13 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.099 2008-Mar-31 20:04:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:04:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:04:10 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Mar-31 20:04:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:04:10 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Mar-31 20:04:10 LOG1 fixed_driftmap: New position: year = 2008.2514338859737 RA = 08:15:36.8 RA/Dec = 08:16:03.8 +03:30:07.4 2008-Mar-31 20:04:10 NOTE fixed_driftmap: Correcting ZA to 14:51:06.3 ... 2008-Mar-31 20:04:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8517527239 -CF 2008-Mar-31 20:04:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:04:10 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:04:10 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Mar-31 20:04:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:04:10 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:04:10 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:04:10 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Mar-31 20:04:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:04:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:04:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:04:10 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:04:10 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8517527239 -CF 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:04:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:04:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:04:10 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:04:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:04:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:04:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:04:11 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:04:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:04:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:04:11 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:04:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:04:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:04:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:04:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:04:11 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:04:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:04:11 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:04:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:04:11 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:04:11 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:04:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:04:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:04:11 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:04:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:04:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:04:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:04:11 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:04:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:04:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:04:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:04:11 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:04:11 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:04:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:04:11 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:04:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:04:11 INFO2 take_spectra: Starting WAPP scan: 809100282 2008-Mar-31 20:04:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:04:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:04:11 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Mar-31 20:04:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:04:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 252.00 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:04:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:04:13 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Mar-31 20:04:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:04:13 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Mar-31 20:04:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:04:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:04:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:04:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:04:13 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Mar-31 20:04:13 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:04:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:04:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.802 > 1.4)! 2008-Mar-31 20:04:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.225 1.382 1.456 1.413 2008-Mar-31 20:04:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.364 1.250 1.303 1.398 2008-Mar-31 20:04:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.270 1.332 1.341 1.802 2008-Mar-31 20:04:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 1.027 1.071 0.907 2008-Mar-31 20:04:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:04:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:04:13 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2008-Mar-31 20:04:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:04:13 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:04:13 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Mar-31 20:04:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:04:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:04:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:04:13 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2008-Mar-31 20:04:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Mar-31 20:04:14 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Mar-31 20:04:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:04:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:04:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:04:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:04:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:04:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:04:14 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:04:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:04:14 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2008-Mar-31 20:04:14 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:04:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:04:14 INFO2 take_spectra: Starting WAPP scan: 809100283 2008-Mar-31 20:04:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:04:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:04:14 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Mar-31 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:04:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0036.fits 2008-Mar-31 20:04:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 255.00 2008-Mar-31 20:04:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0036.fits} 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.887 and 1.499 (still bad) 2008-Mar-31 20:04:18 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.345 2008-Mar-31 20:14:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:14:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:14:15 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Mar-31 20:14:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:14:15 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2008-Mar-31 20:14:15 LOG1 fixed_driftmap: New position: year = 2008.2514530572669 RA = 08:25:43.4 RA/Dec = 08:26:10.4 +03:30:01.1 2008-Mar-31 20:14:15 NOTE fixed_driftmap: Correcting ZA to 14:51:12.6 ... 2008-Mar-31 20:14:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8535080239 -CF 2008-Mar-31 20:14:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:14:15 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:14:15 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Mar-31 20:14:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:14:15 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:14:15 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:14:15 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Mar-31 20:14:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:14:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:14:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:14:15 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:14:15 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8535080239 -CF 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:14:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:14:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:14:15 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:14:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:14:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:14:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:14:16 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:14:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:14:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:14:16 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:14:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:14:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:14:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:14:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:14:16 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:14:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:14:16 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:14:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:14:16 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:14:16 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:14:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:14:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:14:16 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:14:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:14:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:14:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:14:16 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:14:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:14:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:14:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:14:16 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:14:16 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:14:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:14:16 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:14:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:14:16 INFO2 take_spectra: Starting WAPP scan: 809100284 2008-Mar-31 20:14:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:14:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:14:16 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Mar-31 20:14:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:14:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 857.00 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:14:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:14:18 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Mar-31 20:14:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:14:18 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Mar-31 20:14:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:14:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:14:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:14:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:14:18 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Mar-31 20:14:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:14:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:14:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.812 > 1.4)! 2008-Mar-31 20:14:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.223 1.384 1.450 1.409 2008-Mar-31 20:14:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.369 1.250 1.302 1.398 2008-Mar-31 20:14:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.264 1.328 1.339 1.812 2008-Mar-31 20:14:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 1.024 1.067 0.903 2008-Mar-31 20:14:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:14:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:14:18 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2008-Mar-31 20:14:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:14:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:14:18 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Mar-31 20:14:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:14:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:14:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:14:19 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Mar-31 20:14:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Mar-31 20:14:19 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Mar-31 20:14:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:14:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:14:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:14:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:14:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:14:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:14:19 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:14:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:14:19 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2008-Mar-31 20:14:19 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:14:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:14:19 INFO2 take_spectra: Starting WAPP scan: 809100285 2008-Mar-31 20:14:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:14:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:14:19 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Mar-31 20:14:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:14:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:14:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0037.fits 2008-Mar-31 20:14:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 860.00 2008-Mar-31 20:14:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0037.fits} 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 1.495 (still bad) 2008-Mar-31 20:14:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.886 and 1.355 2008-Mar-31 20:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.409 > 1.4)! 2008-Mar-31 20:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.032 1.080 1.049 2008-Mar-31 20:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.908 0.936 1.019 2008-Mar-31 20:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.953 0.998 1.409 2008-Mar-31 20:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 1.021 1.066 0.901 2008-Mar-31 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 1.410 (still bad) 2008-Mar-31 20:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 1.404 (still bad) 2008-Mar-31 20:17:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.392 2008-Mar-31 20:24:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:24:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:24:20 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:24:20 LOG5 end_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 LOG1 fixed_driftmap: New position: year = 2008.25147222856 RA = 08:35:50.0 RA/Dec = 08:36:17.1 +03:29:54.9 2008-Mar-31 20:24:20 NOTE fixed_driftmap: Correcting ZA to 14:51:18.8 ... 2008-Mar-31 20:24:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8552130720 -CF 2008-Mar-31 20:24:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:24:20 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:24:20 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:24:20 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:24:20 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:24:20 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:24:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:24:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:24:20 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:24:20 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8552130720 -CF 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:24:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:24:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:24:20 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2008-Mar-31 20:24:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:24:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:24:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:24:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:24:20 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:24:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:24:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:24:21 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:24:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:24:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:24:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:24:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:24:21 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:24:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:24:21 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:24:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:24:21 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:24:21 LOG5 finish_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:24:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:24:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:24:21 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:24:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:24:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:24:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:24:21 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:24:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:24:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:24:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:24:21 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:24:21 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:24:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:24:21 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Mar-31 20:24:21 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:24:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:24:21 INFO2 take_spectra: Starting WAPP scan: 809100286 2008-Mar-31 20:24:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:24:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:24:22 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Mar-31 20:24:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:24:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1463.00 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.491 > 1.4)! 2008-Mar-31 20:24:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 1.017 1.078 1.047 2008-Mar-31 20:24:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.906 0.936 1.016 2008-Mar-31 20:24:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.949 0.961 1.352 2008-Mar-31 20:24:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.372 1.421 1.491 1.254 2008-Mar-31 20:24:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:24:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:24:24 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:24:24 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:24:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:24:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:24:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:24:24 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:24:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:24:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:24:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:24:24 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:24:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:24:24 LOG5 finish_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:24:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:24:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:24:24 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Mar-31 20:24:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Mar-31 20:24:24 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Mar-31 20:24:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:24:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:24:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:24:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:24:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:24:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:24:25 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:24:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:24:25 LOG5 begin_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2008-Mar-31 20:24:25 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:24:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:24:25 INFO2 take_spectra: Starting WAPP scan: 809100287 2008-Mar-31 20:24:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:24:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:24:25 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Mar-31 20:24:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:24:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:24:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0038.fits 2008-Mar-31 20:24:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0038.fits} 2008-Mar-31 20:24:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1466.00 2008-Mar-31 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 1.222 and 1.813 (still bad) 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:24:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.353 2008-Mar-31 20:34:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:34:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:34:26 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:34:26 LOG5 end_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 LOG1 fixed_driftmap: New position: year = 2008.2514914315411 RA = 08:45:57.7 RA/Dec = 08:46:24.8 +03:29:49.0 2008-Mar-31 20:34:26 NOTE fixed_driftmap: Correcting ZA to 14:51:24.7 ... 2008-Mar-31 20:34:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8568672480 -CF 2008-Mar-31 20:34:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:34:26 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:34:26 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:34:26 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:34:26 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:34:26 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:34:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:34:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:34:26 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:34:26 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8568672480 -CF 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:34:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:34:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:34:26 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Mar-31 20:34:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:34:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:34:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:34:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:34:27 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:34:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:34:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:34:27 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:34:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:34:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:34:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:34:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:34:27 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:34:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:34:27 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:34:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:34:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:34:27 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:34:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:34:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:34:27 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:34:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:34:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:34:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:34:27 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:34:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:34:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:34:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:34:27 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:34:27 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:34:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:34:27 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:34:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:34:27 INFO2 take_spectra: Starting WAPP scan: 809100288 2008-Mar-31 20:34:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:34:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:34:27 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Mar-31 20:34:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:34:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2068.00 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:34:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:34:29 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:34:29 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:34:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:34:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:34:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:34:29 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:34:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:34:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:34:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:34:29 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:34:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:34:29 LOG5 finish_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:34:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:34:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:34:29 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Mar-31 20:34:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Mar-31 20:34:29 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Mar-31 20:34:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:34:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:34:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:34:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:34:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:34:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:34:30 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:34:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:34:30 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Mar-31 20:34:30 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:34:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:34:30 INFO2 take_spectra: Starting WAPP scan: 809100289 2008-Mar-31 20:34:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:34:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:34:30 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Mar-31 20:34:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:34:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:34:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.817 > 1.4)! 2008-Mar-31 20:34:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.217 1.386 1.451 1.412 2008-Mar-31 20:34:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.363 1.250 1.299 1.393 2008-Mar-31 20:34:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.268 1.327 1.340 1.817 2008-Mar-31 20:34:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.375 1.429 1.498 1.261 2008-Mar-31 20:34:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2071.00 2008-Mar-31 20:34:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0039.fits 2008-Mar-31 20:34:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0039.fits} 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.817 (still bad) 2008-Mar-31 20:34:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.354 2008-Mar-31 20:44:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:44:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:44:31 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:44:31 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 LOG1 fixed_driftmap: New position: year = 2008.2515106028343 RA = 08:56:04.3 RA/Dec = 08:56:31.4 +03:29:43.2 2008-Mar-31 20:44:31 NOTE fixed_driftmap: Correcting ZA to 14:51:30.5 ... 2008-Mar-31 20:44:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8584618643 -CF 2008-Mar-31 20:44:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:44:31 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:44:31 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:44:31 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:44:31 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:44:31 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:44:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:44:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:44:31 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:44:31 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8584618643 -CF 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:44:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:44:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:44:31 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Mar-31 20:44:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:44:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:44:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:44:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:44:32 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:44:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:44:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:44:32 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:44:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:44:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:44:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:44:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:44:32 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:44:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:44:32 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:44:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:44:32 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:44:32 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:44:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:44:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:44:32 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:44:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:44:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:44:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:44:32 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:44:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:44:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:44:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:44:32 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:44:32 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:44:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:44:32 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:44:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:44:32 INFO2 take_spectra: Starting WAPP scan: 809100290 2008-Mar-31 20:44:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:44:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:44:32 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Mar-31 20:44:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:44:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2673.00 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:44:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:44:34 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:44:34 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:44:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:44:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:44:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:44:34 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:44:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:44:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:44:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:44:34 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:44:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:44:34 LOG5 finish_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:44:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:44:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:44:34 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Mar-31 20:44:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Mar-31 20:44:34 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Mar-31 20:44:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:44:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:44:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:44:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:44:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:44:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:44:35 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:44:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:44:35 LOG5 begin_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2008-Mar-31 20:44:35 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:44:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:44:35 INFO2 take_spectra: Starting WAPP scan: 809100291 2008-Mar-31 20:44:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:44:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:44:35 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Mar-31 20:44:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:44:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:44:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0040.fits 2008-Mar-31 20:44:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0040.fits} 2008-Mar-31 20:44:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2676.00 2008-Mar-31 20:44:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.821 > 1.4)! 2008-Mar-31 20:44:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.222 1.387 1.454 1.414 2008-Mar-31 20:44:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.368 1.250 1.302 1.400 2008-Mar-31 20:44:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.271 1.334 1.340 1.821 2008-Mar-31 20:44:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.380 1.430 1.500 1.262 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:44:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.400 2008-Mar-31 20:54:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:54:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:54:36 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Mar-31 20:54:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:54:36 LOG5 end_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2008-Mar-31 20:54:36 LOG1 fixed_driftmap: New position: year = 2008.2515297741274 RA = 09:06:10.9 RA/Dec = 09:06:38.1 +03:29:37.7 2008-Mar-31 20:54:36 NOTE fixed_driftmap: Correcting ZA to 14:51:36.0 ... 2008-Mar-31 20:54:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8599965875 -CF 2008-Mar-31 20:54:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 20:54:36 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 20:54:36 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Mar-31 20:54:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 20:54:36 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 20:54:36 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 20:54:36 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Mar-31 20:54:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 20:54:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 20:54:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:54:36 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 20:54:36 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8599965875 -CF 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:54:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 20:54:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 20:54:36 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Mar-31 20:54:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 20:54:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:54:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 20:54:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:54:37 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Mar-31 20:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 20:54:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:54:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:54:38 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:54:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 20:54:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 20:54:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:54:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 20:54:38 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 20:54:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 20:54:38 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 20:54:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 20:54:38 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 20:54:38 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 20:54:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:54:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 20:54:38 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 20:54:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 20:54:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 20:54:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:54:38 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:54:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 20:54:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:54:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:54:38 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 20:54:38 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 20:54:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:54:38 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Mar-31 20:54:38 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 20:54:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:54:38 INFO2 take_spectra: Starting WAPP scan: 809100292 2008-Mar-31 20:54:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 20:54:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:54:39 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Mar-31 20:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:54:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3280.00 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.517 > 1.4)! 2008-Mar-31 20:54:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.883 1.025 1.082 1.061 2008-Mar-31 20:54:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.908 0.938 1.020 2008-Mar-31 20:54:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.910 0.957 0.976 1.357 2008-Mar-31 20:54:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.396 1.484 1.517 1.309 2008-Mar-31 20:54:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 20:54:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 20:54:41 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 20:54:41 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 20:54:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 20:54:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 20:54:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 20:54:41 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 20:54:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 20:54:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 20:54:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 20:54:41 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 20:54:41 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 20:54:41 LOG5 finish_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 20:54:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 20:54:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 20:54:41 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Mar-31 20:54:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Mar-31 20:54:42 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Mar-31 20:54:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 20:54:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 20:54:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 20:54:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 20:54:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 20:54:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 20:54:42 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 20:54:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 20:54:42 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Mar-31 20:54:42 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 20:54:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 20:54:42 INFO2 take_spectra: Starting WAPP scan: 809100293 2008-Mar-31 20:54:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 20:54:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 20:54:42 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Mar-31 20:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 20:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 20:54:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0041.fits 2008-Mar-31 20:54:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3283.00 2008-Mar-31 20:54:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0041.fits} 2008-Mar-31 20:54:43 INFO5 check_wapp_levels: WAPP power levels are between 1.220 and 1.821 (still bad) 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 20:54:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.885 and 1.358 2008-Mar-31 21:04:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:04:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:04:43 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:04:43 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 LOG1 fixed_driftmap: New position: year = 2008.2515490087967 RA = 09:16:19.6 RA/Dec = 09:16:46.7 +03:29:32.4 2008-Mar-31 21:04:43 NOTE fixed_driftmap: Correcting ZA to 14:51:41.3 ... 2008-Mar-31 21:04:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8614731976 -CF 2008-Mar-31 21:04:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:04:43 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:04:43 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:04:43 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:04:43 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:04:43 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:04:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:04:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:04:43 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:04:43 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8614731976 -CF 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:04:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:04:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:04:43 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Mar-31 21:04:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:04:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:04:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:04:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:04:43 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:04:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:04:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:04:44 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:04:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:04:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:04:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:04:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:04:44 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:04:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:04:44 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:04:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:04:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:04:44 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:04:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:04:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:04:44 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:04:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:04:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:04:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:04:44 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:04:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:04:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:04:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:04:44 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:04:44 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:04:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:04:44 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:04:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:04:44 INFO2 take_spectra: Starting WAPP scan: 809100294 2008-Mar-31 21:04:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:04:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:04:44 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Mar-31 21:04:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:04:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3885.00 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.508 > 1.4)! 2008-Mar-31 21:04:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.884 1.021 1.078 1.050 2008-Mar-31 21:04:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.909 0.940 1.024 2008-Mar-31 21:04:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.954 0.965 1.353 2008-Mar-31 21:04:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.384 1.453 1.508 1.284 2008-Mar-31 21:04:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:04:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:04:46 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:04:46 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:04:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:04:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:04:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:04:46 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:04:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:04:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:04:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:04:46 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:04:46 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:04:46 LOG5 finish_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:04:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:04:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:04:46 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Mar-31 21:04:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Mar-31 21:04:46 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Mar-31 21:04:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:04:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:04:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:04:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:04:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:04:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:04:47 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:04:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:04:47 LOG5 begin_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Mar-31 21:04:47 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:04:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:04:47 INFO2 take_spectra: Starting WAPP scan: 809100295 2008-Mar-31 21:04:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:04:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:04:47 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Mar-31 21:04:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:04:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:04:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0042.fits 2008-Mar-31 21:04:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0042.fits} 2008-Mar-31 21:04:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3888.00 2008-Mar-31 21:04:48 INFO5 check_wapp_levels: WAPP power levels are between 1.214 and 1.812 (still bad) 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:04:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.352 2008-Mar-31 21:14:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:14:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:14:48 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Mar-31 21:14:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:14:48 LOG5 end_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Mar-31 21:14:48 LOG1 fixed_driftmap: New position: year = 2008.2515681800899 RA = 09:26:26.2 RA/Dec = 09:26:53.4 +03:29:27.3 2008-Mar-31 21:14:48 NOTE fixed_driftmap: Correcting ZA to 14:51:46.4 ... 2008-Mar-31 21:14:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8628790921 -CF 2008-Mar-31 21:14:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:14:48 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:14:48 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Mar-31 21:14:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:14:48 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:14:48 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:14:48 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Mar-31 21:14:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:14:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:14:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:14:48 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:14:48 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8628790921 -CF 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:14:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:14:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:14:48 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:14:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:14:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:14:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:14:49 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:14:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:14:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:14:49 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:14:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:14:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:14:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:14:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:14:49 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:14:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:14:49 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:14:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:14:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:14:49 LOG5 finish_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:14:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:14:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:14:49 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:14:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:14:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:14:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:14:49 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:14:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:14:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:14:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:14:49 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:14:49 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:14:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:14:49 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:14:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:14:49 INFO2 take_spectra: Starting WAPP scan: 809100296 2008-Mar-31 21:14:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:14:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:14:49 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Mar-31 21:14:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:14:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4490.00 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:14:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:14:51 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:14:51 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:14:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:14:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:14:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:14:51 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.503 > 1.4)! 2008-Mar-31 21:14:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.218 1.380 1.451 1.416 2008-Mar-31 21:14:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.910 0.936 1.021 2008-Mar-31 21:14:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.961 0.966 1.353 2008-Mar-31 21:14:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.382 1.447 1.503 1.279 2008-Mar-31 21:14:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:14:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:14:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:14:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:14:51 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:14:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:14:51 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:14:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:14:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:14:51 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Mar-31 21:14:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Mar-31 21:14:52 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Mar-31 21:14:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:14:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:14:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:14:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:14:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:14:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:14:52 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:14:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:14:52 LOG5 begin_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2008-Mar-31 21:14:52 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:14:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:14:52 INFO2 take_spectra: Starting WAPP scan: 809100297 2008-Mar-31 21:14:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:14:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:14:52 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Mar-31 21:14:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:14:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:14:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0043.fits 2008-Mar-31 21:14:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0043.fits} 2008-Mar-31 21:14:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4493.00 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:14:54 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.880 and 1.396 2008-Mar-31 21:24:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:24:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:24:53 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:24:53 LOG5 end_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 LOG1 fixed_driftmap: New position: year = 2008.251587351383 RA = 09:36:32.8 RA/Dec = 09:37:00.1 +03:29:22.5 2008-Mar-31 21:24:53 NOTE fixed_driftmap: Correcting ZA to 14:51:51.2 ... 2008-Mar-31 21:24:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8642165047 -CF 2008-Mar-31 21:24:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:24:53 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:24:53 LOG5 begin_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:24:53 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:24:53 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:24:53 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:24:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:24:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:24:53 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:24:53 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8642165047 -CF 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:24:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:24:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:24:53 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Mar-31 21:24:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:24:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:24:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:24:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:24:54 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:24:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:24:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:24:54 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:24:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:24:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:24:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:24:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:24:54 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:24:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:24:54 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:24:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:24:54 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:24:54 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:24:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:24:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:24:54 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:24:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:24:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:24:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:24:54 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:24:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:24:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:24:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:24:54 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:24:54 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:24:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:24:54 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:24:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:24:54 INFO2 take_spectra: Starting WAPP scan: 809100298 2008-Mar-31 21:24:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:24:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:24:54 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Mar-31 21:24:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:24:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5095.00 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:24:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:24:56 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:24:56 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:24:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:24:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:24:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:24:56 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:24:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:24:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:24:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:24:56 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:24:56 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:24:56 LOG5 finish_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:24:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:24:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:24:56 LOG5 end_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Mar-31 21:24:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Mar-31 21:24:56 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Mar-31 21:24:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:24:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:24:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:24:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:24:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:24:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:24:57 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:24:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:24:57 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-Mar-31 21:24:57 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:24:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:24:57 INFO2 take_spectra: Starting WAPP scan: 809100299 2008-Mar-31 21:24:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:24:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:24:57 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Mar-31 21:24:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:24:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.809 > 1.4)! 2008-Mar-31 21:24:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.219 1.383 1.452 1.416 2008-Mar-31 21:24:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.359 1.250 1.294 1.395 2008-Mar-31 21:24:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.264 1.334 1.343 1.809 2008-Mar-31 21:24:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.381 1.442 1.503 1.273 2008-Mar-31 21:24:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:24:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0044.fits 2008-Mar-31 21:24:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0044.fits} 2008-Mar-31 21:24:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5098.00 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.809 (still bad) 2008-Mar-31 21:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:25:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.351 2008-Mar-31 21:34:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:34:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:34:58 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:34:58 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 LOG1 fixed_driftmap: New position: year = 2008.2516065226762 RA = 09:46:39.5 RA/Dec = 09:47:06.7 +03:29:18.0 2008-Mar-31 21:34:58 NOTE fixed_driftmap: Correcting ZA to 14:51:55.7 ... 2008-Mar-31 21:34:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8654828245 -CF 2008-Mar-31 21:34:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:34:58 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:34:58 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:34:58 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:34:58 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:34:58 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:34:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:34:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:34:58 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:34:58 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8654828245 -CF 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:34:58 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:34:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:34:58 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Mar-31 21:34:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:34:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:34:58 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:34:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:34:58 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:34:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:34:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:34:59 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:34:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:34:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:34:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:34:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:34:59 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:34:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:34:59 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:34:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:34:59 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:34:59 LOG5 finish_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:34:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:34:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:34:59 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:34:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:34:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:34:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:34:59 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:34:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:34:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:34:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:34:59 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:34:59 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:34:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:34:59 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:34:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:34:59 INFO2 take_spectra: Starting WAPP scan: 809100300 2008-Mar-31 21:34:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:34:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:34:59 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Mar-31 21:34:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:34:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5700.00 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:35:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:35:01 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:35:01 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:35:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:35:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:35:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:35:01 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:35:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:35:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:35:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:35:01 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:35:01 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:35:01 LOG5 finish_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:35:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:35:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:35:01 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Mar-31 21:35:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Mar-31 21:35:01 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Mar-31 21:35:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:35:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:35:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:35:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:35:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:35:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:35:02 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:35:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:35:02 LOG5 begin_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2008-Mar-31 21:35:02 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:35:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:35:02 INFO2 take_spectra: Starting WAPP scan: 809100301 2008-Mar-31 21:35:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:35:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:35:02 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Mar-31 21:35:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:35:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:35:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0045.fits 2008-Mar-31 21:35:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0045.fits} 2008-Mar-31 21:35:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5703.00 2008-Mar-31 21:35:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.783 > 1.4)! 2008-Mar-31 21:35:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.212 1.374 1.444 1.408 2008-Mar-31 21:35:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.357 1.248 1.290 1.392 2008-Mar-31 21:35:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.254 1.328 1.331 1.783 2008-Mar-31 21:35:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.380 1.434 1.502 1.266 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.783 (still bad) 2008-Mar-31 21:35:06 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.882 and 1.330 2008-Mar-31 21:45:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:45:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:45:03 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:45:03 LOG5 end_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 LOG1 fixed_driftmap: New position: year = 2008.2516256939691 RA = 09:56:46.1 RA/Dec = 09:57:13.4 +03:29:13.7 2008-Mar-31 21:45:03 NOTE fixed_driftmap: Correcting ZA to 14:52:00.0 ... 2008-Mar-31 21:45:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8666755947 -CF 2008-Mar-31 21:45:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:45:03 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:45:03 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:45:03 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:45:03 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:45:03 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:45:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:45:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:45:03 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:45:03 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8666755947 -CF 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:45:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:45:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:45:03 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Mar-31 21:45:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:45:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:45:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:45:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:45:03 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:45:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:45:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:45:04 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:45:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:45:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:45:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:45:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:45:04 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:45:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:45:04 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:45:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:45:04 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:45:04 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:45:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:45:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:45:04 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:45:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:45:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:45:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:45:04 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:45:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:45:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:45:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:45:04 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:45:04 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:45:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:45:04 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:45:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:45:04 INFO2 take_spectra: Starting WAPP scan: 809100302 2008-Mar-31 21:45:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:45:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:45:04 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Mar-31 21:45:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:45:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6305.00 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:45:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:45:06 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:45:06 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:45:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:45:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:45:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:45:06 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:45:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:45:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.499 > 1.4)! 2008-Mar-31 21:45:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.884 1.015 1.077 1.049 2008-Mar-31 21:45:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.355 1.249 1.292 1.395 2008-Mar-31 21:45:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.957 0.958 1.331 2008-Mar-31 21:45:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.377 1.430 1.499 1.264 2008-Mar-31 21:45:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:45:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:45:06 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:45:06 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:45:06 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:45:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:45:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:45:06 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Mar-31 21:45:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Mar-31 21:45:07 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Mar-31 21:45:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:45:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:45:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:45:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:45:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:45:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:45:07 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:45:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:45:07 LOG5 begin_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2008-Mar-31 21:45:07 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:45:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:45:07 INFO2 take_spectra: Starting WAPP scan: 809100303 2008-Mar-31 21:45:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:45:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:45:07 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Mar-31 21:45:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:45:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:45:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0046.fits 2008-Mar-31 21:45:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6308.00 2008-Mar-31 21:45:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0046.fits} 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.906 and 1.785 (still bad) 2008-Mar-31 21:45:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.330 2008-Mar-31 21:45:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.412 > 1.4)! 2008-Mar-31 21:45:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.885 1.017 1.075 1.046 2008-Mar-31 21:45:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.909 0.932 1.019 2008-Mar-31 21:45:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.961 1.016 1.412 2008-Mar-31 21:45:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 1.026 1.067 0.906 2008-Mar-31 21:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.883 and 1.418 (still bad) 2008-Mar-31 21:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.886 and 1.413 (still bad) 2008-Mar-31 21:46:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.884 and 1.396 2008-Mar-31 21:55:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:55:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:55:08 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:55:08 LOG5 end_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 LOG1 fixed_driftmap: New position: year = 2008.2516448652623 RA = 10:06:52.8 RA/Dec = 10:07:20.0 +03:29:09.6 2008-Mar-31 21:55:08 NOTE fixed_driftmap: Correcting ZA to 14:52:04.1 ... 2008-Mar-31 21:55:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8677924868 -CF 2008-Mar-31 21:55:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 21:55:08 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 21:55:08 LOG5 begin_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 21:55:08 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 21:55:08 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 21:55:08 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 21:55:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 21:55:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:55:08 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 21:55:08 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8677924868 -CF 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:55:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 21:55:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 21:55:08 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Mar-31 21:55:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 21:55:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:55:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 21:55:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:55:08 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 21:55:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:55:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:55:09 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:55:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 21:55:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 21:55:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:55:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 21:55:09 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 21:55:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 21:55:09 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 21:55:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 21:55:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 21:55:09 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 21:55:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:55:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 21:55:09 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 21:55:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 21:55:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 21:55:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:55:09 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:55:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 21:55:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:55:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:55:09 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 21:55:09 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 21:55:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:55:09 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 21:55:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:55:09 INFO2 take_spectra: Starting WAPP scan: 809100304 2008-Mar-31 21:55:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 21:55:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:55:09 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Mar-31 21:55:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:55:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6910.00 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 21:55:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 21:55:11 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 21:55:11 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 21:55:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 21:55:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 21:55:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 21:55:11 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 21:55:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 21:55:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 21:55:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 21:55:11 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 21:55:11 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 21:55:11 LOG5 finish_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 21:55:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 21:55:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 21:55:11 LOG5 end_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Mar-31 21:55:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Mar-31 21:55:11 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Mar-31 21:55:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 21:55:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 21:55:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 21:55:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 21:55:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 21:55:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 21:55:12 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 21:55:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 21:55:12 LOG5 begin_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Mar-31 21:55:12 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 21:55:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 21:55:12 INFO2 take_spectra: Starting WAPP scan: 809100305 2008-Mar-31 21:55:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 21:55:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 21:55:12 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Mar-31 21:55:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 21:55:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-Mar-31 21:55:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.221 1.386 1.452 1.410 2008-Mar-31 21:55:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.365 1.250 1.295 1.397 2008-Mar-31 21:55:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.964 0.963 1.330 2008-Mar-31 21:55:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.385 1.436 1.506 1.269 2008-Mar-31 21:55:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 21:55:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0047.fits 2008-Mar-31 21:55:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6913.00 2008-Mar-31 21:55:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0047.fits} 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 21:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.910 and 1.786 (still bad) 2008-Mar-31 21:55:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.330 2008-Mar-31 22:05:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:05:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:05:13 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:05:13 LOG5 end_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 LOG1 fixed_driftmap: New position: year = 2008.2516640365554 RA = 10:16:59.4 RA/Dec = 10:17:26.7 +03:29:05.9 2008-Mar-31 22:05:13 NOTE fixed_driftmap: Correcting ZA to 14:52:07.8 ... 2008-Mar-31 22:05:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8688313339 -CF 2008-Mar-31 22:05:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:05:13 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:05:13 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:05:13 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:05:13 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:05:13 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:05:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:05:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:05:13 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:05:13 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8688313339 -CF 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:05:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:05:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:05:13 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Mar-31 22:05:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:05:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:05:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:05:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:05:13 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:05:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:05:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:05:14 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:05:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:05:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:05:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:05:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:05:14 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:05:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:05:14 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:05:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:05:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:05:14 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:05:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:05:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:05:14 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:05:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:05:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:05:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:05:14 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:05:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:05:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:05:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:05:14 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:05:14 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:05:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:05:14 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:05:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:05:14 INFO2 take_spectra: Starting WAPP scan: 809100306 2008-Mar-31 22:05:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:05:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:05:14 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Mar-31 22:05:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:05:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7515.00 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:05:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:05:16 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:05:16 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:05:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:05:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:05:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:05:16 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:05:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:05:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:05:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:05:16 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:05:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:05:16 LOG5 finish_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:05:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:05:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:05:16 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Mar-31 22:05:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Mar-31 22:05:16 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Mar-31 22:05:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:05:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:05:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:05:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:05:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:05:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:05:17 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:05:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:05:17 LOG5 begin_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2008-Mar-31 22:05:17 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:05:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:05:17 INFO2 take_spectra: Starting WAPP scan: 809100307 2008-Mar-31 22:05:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:05:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:05:17 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Mar-31 22:05:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:05:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:05:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.782 > 1.4)! 2008-Mar-31 22:05:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.220 1.376 1.448 1.410 2008-Mar-31 22:05:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.363 1.252 1.296 1.396 2008-Mar-31 22:05:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.341 1.340 1.782 2008-Mar-31 22:05:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.378 1.425 1.499 1.261 2008-Mar-31 22:05:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0048.fits 2008-Mar-31 22:05:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0048.fits} 2008-Mar-31 22:05:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7518.00 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.880 and 1.499 (still bad) 2008-Mar-31 22:05:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.881 and 1.329 2008-Mar-31 22:15:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:15:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:15:18 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Mar-31 22:15:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:15:18 LOG5 end_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2008-Mar-31 22:15:18 LOG1 fixed_driftmap: New position: year = 2008.2516832078486 RA = 10:27:06.1 RA/Dec = 10:27:33.3 +03:29:02.5 2008-Mar-31 22:15:18 NOTE fixed_driftmap: Correcting ZA to 14:52:11.2 ... 2008-Mar-31 22:15:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8697901136 -CF 2008-Mar-31 22:15:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:15:18 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:15:18 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Mar-31 22:15:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:15:18 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:15:18 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:15:18 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Mar-31 22:15:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:15:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:15:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:15:18 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:15:18 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8697901136 -CF 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:15:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:15:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:15:18 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:15:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:15:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:15:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:15:19 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:15:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:15:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:15:19 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:15:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:15:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:15:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:15:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:15:19 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:15:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:15:19 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:15:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:15:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:15:19 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:15:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:15:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:15:19 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:15:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:15:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:15:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:15:19 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:15:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:15:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:15:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:15:19 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:15:19 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:15:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:15:19 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Mar-31 22:15:19 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:15:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:15:19 INFO2 take_spectra: Starting WAPP scan: 809100308 2008-Mar-31 22:15:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:15:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:15:20 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Mar-31 22:15:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:15:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8121.00 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.772 > 1.4)! 2008-Mar-31 22:15:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.216 1.377 1.455 1.413 2008-Mar-31 22:15:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.360 1.247 1.293 1.391 2008-Mar-31 22:15:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.256 1.331 1.328 1.772 2008-Mar-31 22:15:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 1.020 1.069 0.901 2008-Mar-31 22:15:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:15:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:15:22 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:15:22 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:15:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:15:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:15:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:15:22 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:15:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:15:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:15:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:15:22 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:15:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:15:22 LOG5 finish_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:15:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:15:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:15:22 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Mar-31 22:15:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Mar-31 22:15:22 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Mar-31 22:15:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:15:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:15:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:15:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:15:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:15:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:15:23 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:15:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:15:23 LOG5 begin_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2008-Mar-31 22:15:23 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:15:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:15:23 INFO2 take_spectra: Starting WAPP scan: 809100309 2008-Mar-31 22:15:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:15:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:15:23 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Mar-31 22:15:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:15:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:15:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0049.fits 2008-Mar-31 22:15:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8124.00 2008-Mar-31 22:15:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0049.fits} 2008-Mar-31 22:15:24 INFO5 check_wapp_levels: WAPP power levels are between 1.216 and 1.772 (still bad) 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:15:26 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.883 and 1.319 2008-Mar-31 22:25:19 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:25:19.312 (seconds: 80719.312)!} 2008-Mar-31 22:25:19 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:25:19.312 (seconds: 80719.312)! 2008-Mar-31 22:25:20 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 80718.0 to 80719.0! 2008-Mar-31 22:25:21 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (80718.0 - 80720.0)! 2008-Mar-31 22:25:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:25:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:25:24 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:25:24 LOG5 end_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 LOG1 fixed_driftmap: New position: year = 2008.2517024108299 RA = 10:37:13.7 RA/Dec = 10:37:41.0 +03:28:59.3 2008-Mar-31 22:25:24 NOTE fixed_driftmap: Correcting ZA to 14:52:14.4 ... 2008-Mar-31 22:25:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8706683421 -CF 2008-Mar-31 22:25:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:25:24 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:25:24 LOG5 begin_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:25:24 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:25:24 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:25:24 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:25:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:25:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:25:24 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:25:24 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8706683421 -CF 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:25:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:25:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:25:24 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Mar-31 22:25:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:25:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:25:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:25:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:25:24 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Mar-31 22:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:25:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:25:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:25:26 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:25:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:25:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:25:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:25:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:25:26 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:25:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:25:26 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:25:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:25:26 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:25:26 LOG5 finish_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:25:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:25:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:25:26 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:25:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:25:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:25:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:25:26 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:25:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:25:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:25:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:25:26 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:25:26 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:25:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:25:26 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:25:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:25:26 INFO2 take_spectra: Starting WAPP scan: 809100310 2008-Mar-31 22:25:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:25:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:25:26 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Mar-31 22:25:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:25:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8727.00 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:25:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.775 > 1.4)! 2008-Mar-31 22:25:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.226 1.384 1.452 1.410 2008-Mar-31 22:25:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.358 1.255 1.298 1.408 2008-Mar-31 22:25:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.268 1.349 1.338 1.775 2008-Mar-31 22:25:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.382 1.428 1.500 1.263 2008-Mar-31 22:25:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:25:28 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Mar-31 22:25:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:25:28 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Mar-31 22:25:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:25:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:25:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:25:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:25:28 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Mar-31 22:25:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:25:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:25:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:25:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:25:28 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Mar-31 22:25:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:25:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:25:28 LOG5 finish_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Mar-31 22:25:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:25:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:25:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:25:28 LOG5 end_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Mar-31 22:25:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2008-Mar-31 22:25:29 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2008-Mar-31 22:25:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:25:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:25:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:25:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:25:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:25:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:25:29 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:25:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:25:29 LOG5 begin_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2008-Mar-31 22:25:29 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:25:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:25:29 INFO2 take_spectra: Starting WAPP scan: 809100311 2008-Mar-31 22:25:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:25:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:25:29 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Mar-31 22:25:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:25:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:25:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0050.fits 2008-Mar-31 22:25:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8730.00 2008-Mar-31 22:25:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0050.fits} 2008-Mar-31 22:25:30 INFO5 check_wapp_levels: WAPP power levels are between 1.226 and 1.775 (still bad) 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:25:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.887 and 1.323 2008-Mar-31 22:35:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:35:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:35:30 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Mar-31 22:35:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:35:30 LOG5 end_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2008-Mar-31 22:35:30 LOG1 fixed_driftmap: New position: year = 2008.251721613811 RA = 10:47:21.4 RA/Dec = 10:47:48.7 +03:28:56.4 2008-Mar-31 22:35:30 NOTE fixed_driftmap: Correcting ZA to 14:52:17.3 ... 2008-Mar-31 22:35:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8714626406 -CF 2008-Mar-31 22:35:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:35:30 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:35:30 LOG5 begin_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Mar-31 22:35:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:35:30 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:35:30 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:35:30 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Mar-31 22:35:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:35:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:35:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:35:30 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:35:30 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8714626406 -CF 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:35:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:35:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:35:30 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:35:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:35:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:35:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:35:31 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:35:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:35:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:35:31 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:35:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:35:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:35:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:35:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:35:31 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:35:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:35:31 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:35:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:35:31 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:35:31 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:35:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:35:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:35:31 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:35:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:35:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:35:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:35:31 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:35:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:35:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:35:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:35:31 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Mar-31 22:35:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:35:32 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:35:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:35:32 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Mar-31 22:35:32 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:35:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:35:32 INFO2 take_spectra: Starting WAPP scan: 809100312 2008-Mar-31 22:35:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:35:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:35:32 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Mar-31 22:35:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:35:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9333.00 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:35:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:35:34 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:35:34 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:35:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:35:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:35:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:35:34 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:35:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:35:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:35:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:35:34 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:35:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:35:34 LOG5 finish_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:35:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:35:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:35:34 LOG5 end_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Mar-31 22:35:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2008-Mar-31 22:35:35 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2008-Mar-31 22:35:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:35:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:35:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:35:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:35:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:35:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:35:35 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:35:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:35:35 LOG5 begin_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2008-Mar-31 22:35:35 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:35:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:35:35 INFO2 take_spectra: Starting WAPP scan: 809100313 2008-Mar-31 22:35:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:35:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:35:35 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Mar-31 22:35:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:35:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.771 > 1.4)! 2008-Mar-31 22:35:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.223 1.386 1.458 1.416 2008-Mar-31 22:35:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.365 1.256 1.299 1.400 2008-Mar-31 22:35:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.270 1.347 1.338 1.771 2008-Mar-31 22:35:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.387 1.428 1.506 1.261 2008-Mar-31 22:35:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:35:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9336.00 2008-Mar-31 22:35:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0051.fits 2008-Mar-31 22:35:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0051.fits} 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.884 and 1.506 (still bad) 2008-Mar-31 22:35:39 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.889 and 1.319 2008-Mar-31 22:40:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 22:40:18.302 (seconds: 81618.302)!} 2008-Mar-31 22:40:18 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 22:40:18.302 (seconds: 81618.302)! 2008-Mar-31 22:40:19 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 81617.0 to 81618.0! 2008-Mar-31 22:40:20 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (81617.0 - 81619.0)! 2008-Mar-31 22:45:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:45:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:45:36 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:45:36 LOG5 end_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 LOG1 fixed_driftmap: New position: year = 2008.2517408167923 RA = 10:57:29.0 RA/Dec = 10:57:56.3 +03:28:53.9 2008-Mar-31 22:45:36 NOTE fixed_driftmap: Correcting ZA to 14:52:19.8 ... 2008-Mar-31 22:45:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8721714725 -CF 2008-Mar-31 22:45:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:45:36 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:45:36 LOG5 begin_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:45:36 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:45:36 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:45:36 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:45:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:45:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:45:36 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:45:36 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8721714725 -CF 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:45:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:45:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:45:36 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Mar-31 22:45:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:45:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:45:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:45:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:45:36 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Mar-31 22:45:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:45:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:45:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:45:37 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Mar-31 22:45:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:45:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:45:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:45:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:45:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:45:37 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Mar-31 22:45:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:45:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:45:37 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Mar-31 22:45:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:45:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:45:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:45:37 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Mar-31 22:45:37 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:45:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:45:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:45:38 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Mar-31 22:45:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:45:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:45:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:45:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:45:38 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Mar-31 22:45:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:45:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:45:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:45:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:45:38 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Mar-31 22:45:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:45:38 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:45:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:45:38 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Mar-31 22:45:38 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:45:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:45:38 INFO2 take_spectra: Starting WAPP scan: 809100314 2008-Mar-31 22:45:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:45:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:45:38 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Mar-31 22:45:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:45:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9939.00 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.763 > 1.4)! 2008-Mar-31 22:45:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.223 1.386 1.455 1.410 2008-Mar-31 22:45:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.911 0.942 1.024 2008-Mar-31 22:45:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.269 1.344 1.333 1.763 2008-Mar-31 22:45:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 1.019 1.074 0.902 2008-Mar-31 22:45:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:45:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:45:40 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Mar-31 22:45:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:45:40 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Mar-31 22:45:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:45:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:45:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:45:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:45:40 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Mar-31 22:45:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:45:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:45:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:45:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:45:40 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Mar-31 22:45:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:45:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:45:40 LOG5 finish_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Mar-31 22:45:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:45:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:45:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:45:41 LOG5 end_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Mar-31 22:45:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2008-Mar-31 22:45:41 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2008-Mar-31 22:45:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:45:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:45:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:45:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:45:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:45:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:45:41 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:45:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:45:41 LOG5 begin_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2008-Mar-31 22:45:41 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:45:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:45:41 INFO2 take_spectra: Starting WAPP scan: 809100315 2008-Mar-31 22:45:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:45:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:45:41 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Mar-31 22:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:45:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0052.fits 2008-Mar-31 22:45:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0052.fits} 2008-Mar-31 22:45:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9942.00 2008-Mar-31 22:45:42 INFO5 check_wapp_levels: WAPP power levels are between 1.223 and 1.763 (still bad) 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:45:44 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.313 2008-Mar-31 22:55:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:55:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:55:42 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Mar-31 22:55:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:55:42 LOG5 end_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2008-Mar-31 22:55:42 LOG1 fixed_driftmap: New position: year = 2008.2517600197734 RA = 11:07:36.7 RA/Dec = 11:08:04.0 +03:28:51.6 2008-Mar-31 22:55:42 NOTE fixed_driftmap: Correcting ZA to 14:52:22.1 ... 2008-Mar-31 22:55:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8727934447 -CF 2008-Mar-31 22:55:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 22:55:42 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 22:55:42 LOG5 begin_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Mar-31 22:55:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 22:55:42 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 22:55:42 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 22:55:42 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Mar-31 22:55:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 22:55:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 22:55:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:55:42 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 22:55:42 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Mar-31 22:55:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8727934447 -CF 2008-Mar-31 22:55:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:55:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 22:55:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 22:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:55:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 22:55:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 22:55:43 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 22:55:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:55:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 22:55:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:55:43 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:55:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:55:43 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:55:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 22:55:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 22:55:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:55:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 22:55:43 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 22:55:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 22:55:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 22:55:43 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 22:55:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 22:55:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 22:55:43 LOG5 finish_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 22:55:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:55:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 22:55:43 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 22:55:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 22:55:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 22:55:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:55:43 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:55:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 22:55:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:55:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:55:43 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 22:55:43 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 22:55:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:55:43 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Mar-31 22:55:43 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 22:55:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:55:43 INFO2 take_spectra: Starting WAPP scan: 809100316 2008-Mar-31 22:55:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 22:55:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:55:44 LOG5 begin_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Mar-31 22:55:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:55:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10545.00 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.772 > 1.4)! 2008-Mar-31 22:55:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.226 1.374 1.451 1.408 2008-Mar-31 22:55:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.910 0.938 1.019 2008-Mar-31 22:55:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.263 1.337 1.348 1.772 2008-Mar-31 22:55:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 1.019 1.073 0.902 2008-Mar-31 22:55:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 22:55:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 22:55:46 LOG5 end_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 22:55:46 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 22:55:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 22:55:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 22:55:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 22:55:46 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 22:55:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 22:55:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 22:55:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 22:55:46 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 22:55:46 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 22:55:46 LOG5 finish_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 22:55:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 22:55:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 22:55:46 LOG5 end_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Mar-31 22:55:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2008-Mar-31 22:55:46 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2008-Mar-31 22:55:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 22:55:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 22:55:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 22:55:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 22:55:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 22:55:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 22:55:47 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 22:55:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 22:55:47 LOG5 begin_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Mar-31 22:55:47 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 22:55:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 22:55:47 INFO2 take_spectra: Starting WAPP scan: 809100317 2008-Mar-31 22:55:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 22:55:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 22:55:47 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Mar-31 22:55:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 22:55:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 22:55:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0053.fits 2008-Mar-31 22:55:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10548.00 2008-Mar-31 22:55:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0053.fits} 2008-Mar-31 22:55:48 INFO5 check_wapp_levels: WAPP power levels are between 1.226 and 1.772 (still bad) 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 22:55:50 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.344 2008-Mar-31 23:05:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:05:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:05:48 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:05:48 LOG5 end_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 LOG1 fixed_driftmap: New position: year = 2008.2517792227547 RA = 11:17:44.4 RA/Dec = 11:18:11.6 +03:28:49.7 2008-Mar-31 23:05:48 NOTE fixed_driftmap: Correcting ZA to 14:52:24.0 ... 2008-Mar-31 23:05:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8733273465 -CF 2008-Mar-31 23:05:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:05:48 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:05:48 LOG5 begin_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:05:48 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:05:48 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:05:48 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:05:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:05:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:05:48 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:05:48 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8733273465 -CF 2008-Mar-31 23:05:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:05:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:05:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:05:48 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Mar-31 23:05:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:05:48 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Mar-31 23:05:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:05:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:05:48 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:05:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:05:48 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:05:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:05:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:05:49 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:05:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:05:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:05:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:05:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:05:49 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:05:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:05:49 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:05:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:05:49 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:05:49 LOG5 finish_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:05:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:05:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:05:49 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:05:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:05:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:05:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:05:49 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:05:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:05:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:05:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:05:49 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:05:49 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:05:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:05:49 LOG5 begin_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:05:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:05:49 INFO2 take_spectra: Starting WAPP scan: 809100318 2008-Mar-31 23:05:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:05:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:05:49 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Mar-31 23:05:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:05:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11150.00 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:05:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:05:51 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:05:51 LOG5 end_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:05:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:05:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:05:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:05:51 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:05:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:05:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:05:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:05:51 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:05:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:05:51 LOG5 finish_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:05:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:05:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:05:51 LOG5 end_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Mar-31 23:05:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2008-Mar-31 23:05:51 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2008-Mar-31 23:05:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:05:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:05:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:05:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:05:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:05:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:05:52 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:05:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:05:52 LOG5 begin_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2008-Mar-31 23:05:52 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:05:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:05:52 INFO2 take_spectra: Starting WAPP scan: 809100319 2008-Mar-31 23:05:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:05:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:05:52 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Mar-31 23:05:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:05:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:05:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.748 > 1.4)! 2008-Mar-31 23:05:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.229 1.380 1.455 1.414 2008-Mar-31 23:05:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.361 1.255 1.299 1.401 2008-Mar-31 23:05:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.267 1.348 1.339 1.748 2008-Mar-31 23:05:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.383 1.427 1.502 1.260 2008-Mar-31 23:05:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0054.fits 2008-Mar-31 23:05:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11153.00 2008-Mar-31 23:05:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0054.fits} 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.885 and 1.502 (still bad) 2008-Mar-31 23:05:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.304 2008-Mar-31 23:10:16 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:10:16.300 (seconds: 83416.300)!} 2008-Mar-31 23:10:16 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:10:16.300 (seconds: 83416.300)! 2008-Mar-31 23:10:17 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 83415.0 to 83416.0! 2008-Mar-31 23:10:18 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (83415.0 - 83417.0)! 2008-Mar-31 23:15:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:15:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:15:53 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:15:53 LOG5 end_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG1 fixed_driftmap: New position: year = 2008.2517983940479 RA = 11:27:51.0 RA/Dec = 11:28:18.3 +03:28:48.1 2008-Mar-31 23:15:53 NOTE fixed_driftmap: Correcting ZA to 14:52:25.6 ... 2008-Mar-31 23:15:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8737714760 -CF 2008-Mar-31 23:15:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:15:53 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:15:53 LOG5 begin_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:15:53 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:15:53 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:15:53 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:15:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:15:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:15:53 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:15:53 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8737714760 -CF 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 23:15:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:15:53 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:15:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:15:53 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:15:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:15:53 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Mar-31 23:15:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:15:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:15:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:15:54 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Mar-31 23:15:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:15:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:15:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:15:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:15:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:15:54 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Mar-31 23:15:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:15:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:15:54 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Mar-31 23:15:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:15:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:15:54 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:15:54 LOG5 finish_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Mar-31 23:15:54 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:15:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:15:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:15:54 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Mar-31 23:15:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:15:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:15:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:15:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:15:54 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Mar-31 23:15:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:15:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:15:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:15:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:15:55 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Mar-31 23:15:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:15:55 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:15:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:15:55 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Mar-31 23:15:55 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:15:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:15:55 INFO2 take_spectra: Starting WAPP scan: 809100320 2008-Mar-31 23:15:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:15:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:15:55 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Mar-31 23:15:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:15:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11756.00 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:15:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:15:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:15:57 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:15:57 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:15:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:15:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:15:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:15:57 LOG5 begin_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:15:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:15:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:15:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:15:57 LOG5 end_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:15:57 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:15:57 LOG5 finish_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:15:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:15:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:15:57 LOG5 end_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Mar-31 23:15:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2008-Mar-31 23:15:57 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2008-Mar-31 23:15:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:15:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:15:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:15:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:15:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:15:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:15:58 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:15:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:15:58 LOG5 begin_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2008-Mar-31 23:15:58 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:15:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:15:58 INFO2 take_spectra: Starting WAPP scan: 809100321 2008-Mar-31 23:15:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:15:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:15:58 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Mar-31 23:15:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:15:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.749 > 1.4)! 2008-Mar-31 23:15:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.228 1.387 1.465 1.423 2008-Mar-31 23:15:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.364 1.260 1.302 1.401 2008-Mar-31 23:15:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.269 1.351 1.342 1.749 2008-Mar-31 23:15:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.386 1.425 1.504 1.261 2008-Mar-31 23:15:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:15:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0055.fits 2008-Mar-31 23:15:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11759.00 2008-Mar-31 23:15:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0055.fits} 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:16:00 INFO5 check_wapp_levels: WAPP power levels are between 1.228 and 1.749 (still bad) 2008-Mar-31 23:16:02 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.304 2008-Mar-31 23:25:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:25:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:25:59 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:25:59 LOG5 end_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 LOG1 fixed_driftmap: New position: year = 2008.251817597029 RA = 11:37:58.7 RA/Dec = 11:38:25.9 +03:28:46.8 2008-Mar-31 23:25:59 NOTE fixed_driftmap: Correcting ZA to 14:52:26.9 ... 2008-Mar-31 23:25:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8741264286 -CF 2008-Mar-31 23:25:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:25:59 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:25:59 LOG5 begin_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:25:59 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:25:59 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:25:59 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:25:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:25:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:25:59 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:25:59 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8741264286 -CF 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:25:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 23:25:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:25:59 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Mar-31 23:25:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:25:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:26:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:26:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:26:00 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:26:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:26:00 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:26:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:26:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:26:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:26:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:26:00 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:26:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:26:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:26:00 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:26:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:26:00 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:26:00 LOG5 finish_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:26:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:26:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:26:00 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:26:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:26:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:26:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:26:00 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:26:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:26:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:26:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:26:00 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:26:00 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:26:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:26:00 LOG5 begin_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:26:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:26:00 INFO2 take_spectra: Starting WAPP scan: 809100322 2008-Mar-31 23:26:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:26:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:26:00 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Mar-31 23:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:26:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12361.00 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:26:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:26:02 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:26:02 LOG5 end_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:26:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:26:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:26:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:26:02 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:26:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:26:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:26:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:26:02 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:26:02 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:26:02 LOG5 finish_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:26:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:26:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:26:02 LOG5 end_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Mar-31 23:26:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2008-Mar-31 23:26:02 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2008-Mar-31 23:26:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:26:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:26:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:26:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:26:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:26:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:26:03 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:26:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:26:03 LOG5 begin_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2008-Mar-31 23:26:03 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:26:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:26:03 INFO2 take_spectra: Starting WAPP scan: 809100323 2008-Mar-31 23:26:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:26:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:26:03 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Mar-31 23:26:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:26:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:26:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.720 > 1.4)! 2008-Mar-31 23:26:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.225 1.379 1.450 1.410 2008-Mar-31 23:26:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.362 1.254 1.301 1.398 2008-Mar-31 23:26:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.261 1.346 1.335 1.720 2008-Mar-31 23:26:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.385 1.421 1.502 1.255 2008-Mar-31 23:26:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12364.00 2008-Mar-31 23:26:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0056.fits 2008-Mar-31 23:26:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0056.fits} 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:26:05 INFO5 check_wapp_levels: WAPP power levels are between 1.225 and 1.720 (still bad) 2008-Mar-31 23:26:07 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.284 2008-Mar-31 23:36:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:36:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:36:04 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:36:04 LOG5 end_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 LOG1 fixed_driftmap: New position: year = 2008.2518367683222 RA = 11:48:05.4 RA/Dec = 11:48:32.6 +03:28:45.9 2008-Mar-31 23:36:04 NOTE fixed_driftmap: Correcting ZA to 14:52:27.8 ... 2008-Mar-31 23:36:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8743903467 -CF 2008-Mar-31 23:36:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:36:04 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:36:04 LOG5 begin_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:36:04 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:36:04 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:36:04 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:36:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:36:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:36:04 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:36:04 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8743903467 -CF 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:36:04 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 23:36:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:36:04 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Mar-31 23:36:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:36:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:36:04 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:36:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:36:04 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:36:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:36:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:36:05 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:36:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:36:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:36:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:36:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:36:05 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:36:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:36:05 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:36:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:36:05 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:36:05 LOG5 finish_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:36:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:36:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:36:05 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:36:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:36:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:36:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:36:05 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:36:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:36:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:36:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:36:05 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:36:05 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:36:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:36:05 LOG5 begin_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:36:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:36:05 INFO2 take_spectra: Starting WAPP scan: 809100324 2008-Mar-31 23:36:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:36:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:36:05 LOG5 begin_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2008-Mar-31 23:36:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:36:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12966.00 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:36:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:36:07 LOG5 end_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:36:07 LOG5 end_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:36:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:36:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:36:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:36:07 LOG5 begin_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:36:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:36:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:36:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:36:07 LOG5 end_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:36:07 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:36:07 LOG5 finish_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:36:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:36:07 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:36:07 LOG5 end_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Mar-31 23:36:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2008-Mar-31 23:36:07 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2008-Mar-31 23:36:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:36:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:36:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:36:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:36:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:36:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:36:08 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:36:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:36:08 LOG5 begin_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2008-Mar-31 23:36:08 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:36:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:36:08 INFO2 take_spectra: Starting WAPP scan: 809100325 2008-Mar-31 23:36:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:36:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:36:08 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Mar-31 23:36:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:36:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:36:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0057.fits 2008-Mar-31 23:36:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0057.fits} 2008-Mar-31 23:36:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12969.00 2008-Mar-31 23:36:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.712 > 1.4)! 2008-Mar-31 23:36:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.231 1.370 1.450 1.407 2008-Mar-31 23:36:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.357 1.253 1.297 1.396 2008-Mar-31 23:36:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.257 1.341 1.337 1.712 2008-Mar-31 23:36:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.384 1.418 1.502 1.255 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:36:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.891 and 1.396 2008-Mar-31 23:46:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:46:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:46:09 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:46:09 LOG5 end_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 LOG1 fixed_driftmap: New position: year = 2008.2518559396153 RA = 11:58:12.1 RA/Dec = 11:58:39.3 +03:28:45.3 2008-Mar-31 23:46:09 NOTE fixed_driftmap: Correcting ZA to 14:52:28.4 ... 2008-Mar-31 23:46:09 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8745633740 -CF 2008-Mar-31 23:46:09 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:46:09 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:46:09 LOG5 begin_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:46:09 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:46:09 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:46:09 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:46:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:46:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:46:09 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:46:09 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8745633740 -CF 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:46:09 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 23:46:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:46:09 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Mar-31 23:46:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:46:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:46:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:46:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:46:10 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:46:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:46:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:46:10 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:46:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:46:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:46:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:46:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:46:10 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:46:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:46:10 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:46:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:46:10 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:46:10 LOG5 finish_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:46:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:46:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:46:10 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:46:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:46:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:46:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:46:10 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:46:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:46:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:46:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:46:10 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:46:10 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:46:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:46:10 LOG5 begin_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:46:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:46:10 INFO2 take_spectra: Starting WAPP scan: 809100326 2008-Mar-31 23:46:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:46:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:46:10 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Mar-31 23:46:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:46:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13571.00 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:46:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:46:12 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:46:12 LOG5 end_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:46:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:46:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:46:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:46:12 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.705 > 1.4)! 2008-Mar-31 23:46:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.239 1.393 1.459 1.417 2008-Mar-31 23:46:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.362 1.257 1.302 1.402 2008-Mar-31 23:46:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.267 1.349 1.340 1.705 2008-Mar-31 23:46:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.386 1.427 1.504 1.261 2008-Mar-31 23:46:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:46:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:46:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:46:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:46:12 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:46:12 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:46:12 LOG5 finish_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:46:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:46:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:46:12 LOG5 end_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Mar-31 23:46:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2008-Mar-31 23:46:12 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2008-Mar-31 23:46:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:46:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:46:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:46:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:46:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:46:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:46:13 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:46:13 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:46:13 LOG5 begin_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2008-Mar-31 23:46:13 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:46:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:46:13 INFO2 take_spectra: Starting WAPP scan: 809100327 2008-Mar-31 23:46:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:46:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:46:13 LOG5 begin_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2008-Mar-31 23:46:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:46:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:46:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0058.fits 2008-Mar-31 23:46:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13574.00 2008-Mar-31 23:46:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0058.fits} 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:46:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.269 2008-Mar-31 23:55:13 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 23:55:13.308 (seconds: 86113.308)!} 2008-Mar-31 23:55:13 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 23:55:13.308 (seconds: 86113.308)! 2008-Mar-31 23:55:14 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 86112.0 to 86113.0! 2008-Mar-31 23:55:15 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (86112.0 - 86114.0)! 2008-Mar-31 23:56:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:56:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:56:14 LOG5 end_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:56:14 LOG5 end_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG1 fixed_driftmap: New position: year = 2008.2518751109085 RA = 12:08:18.7 RA/Dec = 12:08:45.9 +03:28:45.0 2008-Mar-31 23:56:14 NOTE fixed_driftmap: Correcting ZA to 14:52:28.7 ... 2008-Mar-31 23:56:14 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8746451750 -CF 2008-Mar-31 23:56:14 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Mar-31 23:56:14 START begin_task: Starting task 'WAPP calibration' 2008-Mar-31 23:56:14 LOG5 begin_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Mar-31 23:56:14 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Mar-31 23:56:14 START begin_task: Starting task 'selecting calibration type' 2008-Mar-31 23:56:14 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Mar-31 23:56:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Mar-31 23:56:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:56:14 START begin_task: Starting task 'waiting on setcal' 2008-Mar-31 23:56:14 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8746451750 -CF 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Mar-31 23:56:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Mar-31 23:56:14 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Mar-31 23:56:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:56:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Mar-31 23:56:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:56:14 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Mar-31 23:56:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Mar-31 23:56:15 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:56:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:56:15 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:56:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Mar-31 23:56:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Mar-31 23:56:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:56:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Mar-31 23:56:15 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG4 got_alfamon: From ALFAMON: ACK 2008-Mar-31 23:56:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Mar-31 23:56:15 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Mar-31 23:56:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Mar-31 23:56:15 STOP finish_task: Finishing task 'selecting calibration type' 2008-Mar-31 23:56:15 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 INFO3 finish_task: DONE finished configuring: calibration type 2008-Mar-31 23:56:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:56:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Mar-31 23:56:15 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Mar-31 23:56:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Mar-31 23:56:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Mar-31 23:56:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:56:15 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:56:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Mar-31 23:56:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:56:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:56:15 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Mar-31 23:56:15 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Mar-31 23:56:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:56:15 LOG5 begin_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 INFO3 take_spectra: Starting take_spectra 1 1 2008-Mar-31 23:56:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:56:15 INFO2 take_spectra: Starting WAPP scan: 809100328 2008-Mar-31 23:56:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Mar-31 23:56:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:56:15 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Mar-31 23:56:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:56:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14176.00 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Mar-31 23:56:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Mar-31 23:56:17 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Mar-31 23:56:17 LOG5 end_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Mar-31 23:56:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Mar-31 23:56:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Mar-31 23:56:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Mar-31 23:56:17 LOG5 begin_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Mar-31 23:56:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Mar-31 23:56:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Mar-31 23:56:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Mar-31 23:56:17 LOG5 end_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Mar-31 23:56:17 STOP finish_task: Finishing task 'WAPP calibration' 2008-Mar-31 23:56:17 LOG5 finish_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Mar-31 23:56:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Mar-31 23:56:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Mar-31 23:56:17 LOG5 end_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Mar-31 23:56:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2008-Mar-31 23:56:17 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2008-Mar-31 23:56:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Mar-31 23:56:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Mar-31 23:56:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Mar-31 23:56:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Mar-31 23:56:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Mar-31 23:56:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Mar-31 23:56:18 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Mar-31 23:56:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Mar-31 23:56:18 LOG5 begin_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2008-Mar-31 23:56:18 INFO3 take_spectra: Starting take_spectra 600 1 2008-Mar-31 23:56:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Mar-31 23:56:18 INFO2 take_spectra: Starting WAPP scan: 809100329 2008-Mar-31 23:56:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Mar-31 23:56:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Mar-31 23:56:18 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Mar-31 23:56:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Mar-31 23:56:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.633 > 1.4)! 2008-Mar-31 23:56:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.227 1.379 1.456 1.413 2008-Mar-31 23:56:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.362 1.257 1.301 1.401 2008-Mar-31 23:56:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.266 1.348 1.338 1.633 2008-Mar-31 23:56:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.382 1.420 1.501 1.258 2008-Mar-31 23:56:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Mar-31 23:56:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080331.a2010.0059.fits 2008-Mar-31 23:56:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080331.a2010.0059.fits} 2008-Mar-31 23:56:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14179.00 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Mar-31 23:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.633 (still bad) 2008-Mar-31 23:56:22 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.888 and 1.214 2008-Mar-31 23:56:30 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54557.164213 to 54557.164225! 2008-Mar-31 23:56:30 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 86188.0 to 86189.0! 2008-Mar-31 23:56:31 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54557.164213 - 54557.164236)! 2008-Mar-31 23:56:31 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (86188.0 - 86190.0)! 2008-Apr-01 00:05:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.426 > 1.4)! 2008-Apr-01 00:05:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.021 1.087 1.050 2008-Apr-01 00:05:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.910 0.938 1.021 2008-Apr-01 00:05:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.969 0.968 1.175 2008-Apr-01 00:05:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.313 1.351 1.426 1.197 2008-Apr-01 00:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.892 and 1.473 (still bad) 2008-Apr-01 00:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.475 (still bad) 2008-Apr-01 00:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.438 (still bad) 2008-Apr-01 00:05:12 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.367 2008-Apr-01 00:06:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:06:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:06:19 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:06:19 LOG5 end_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG1 fixed_driftmap: New position: year = 2008.2518942822014 RA = 12:18:25.4 RA/Dec = 12:18:52.6 +03:28:45.0 2008-Apr-01 00:06:19 NOTE fixed_driftmap: Correcting ZA to 14:52:28.7 ... 2008-Apr-01 00:06:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8746355907 -CF 2008-Apr-01 00:06:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:06:19 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:06:19 LOG5 begin_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:06:19 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:06:19 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:06:19 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:06:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:06:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:06:19 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:06:19 LOG5 begin_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8746355907 -CF 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:06:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:06:19 LOG5 end_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:06:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:06:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:06:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:06:19 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-01 00:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:06:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:06:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:06:20 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:06:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:06:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:06:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:06:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:06:20 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:06:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:06:20 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:06:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:06:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:06:20 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:06:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:06:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:06:20 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:06:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:06:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:06:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:06:20 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:06:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:06:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:06:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:06:20 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:06:20 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:06:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:06:20 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:06:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:06:20 INFO2 take_spectra: Starting WAPP scan: 809200001 2008-Apr-01 00:06:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:06:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:06:20 LOG5 begin_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-01 00:06:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:06:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14781.00 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:06:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:06:22 LOG5 end_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:06:22 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:06:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:06:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:06:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:06:22 LOG5 begin_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:06:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:06:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:06:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:06:22 LOG5 end_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:06:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:06:22 LOG5 finish_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:06:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:06:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:06:22 LOG5 end_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Apr-01 00:06:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2008-Apr-01 00:06:22 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2008-Apr-01 00:06:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:06:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:06:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:06:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:06:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:06:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:06:23 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:06:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:06:23 LOG5 begin_task: Level: (2) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-01 00:06:23 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:06:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:06:23 INFO2 take_spectra: Starting WAPP scan: 809200002 2008-Apr-01 00:06:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:06:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:06:23 LOG5 begin_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-01 00:06:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:06:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:06:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.546 > 1.4)! 2008-Apr-01 00:06:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.225 1.378 1.450 1.406 2008-Apr-01 00:06:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.368 1.260 1.298 1.395 2008-Apr-01 00:06:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.259 1.343 1.339 1.546 2008-Apr-01 00:06:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.384 1.418 1.501 1.255 2008-Apr-01 00:06:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0000.fits 2008-Apr-01 00:06:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0000.fits} 2008-Apr-01 00:06:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14784.00 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.900 and 1.546 (still bad) 2008-Apr-01 00:06:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.892 and 1.153 2008-Apr-01 00:16:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:16:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:16:24 LOG5 end_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:16:24 LOG5 end_task: Level: (2) ID = <10450> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG1 fixed_driftmap: New position: year = 2008.2519134534946 RA = 12:28:32.1 RA/Dec = 12:28:59.2 +03:28:45.4 2008-Apr-01 00:16:24 NOTE fixed_driftmap: Correcting ZA to 14:52:28.3 ... 2008-Apr-01 00:16:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8745346396 -CF 2008-Apr-01 00:16:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:16:24 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:16:24 LOG5 begin_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:16:24 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:16:24 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:16:24 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:16:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:16:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:16:24 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:16:24 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8745346396 -CF 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:16:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:16:24 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:16:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:16:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:16:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:16:24 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-01 00:16:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:16:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:16:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:16:25 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:16:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:16:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:16:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:16:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:16:25 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:16:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:16:25 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:16:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:16:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:16:25 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:16:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:16:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:16:25 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:16:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:16:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:16:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:16:25 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:16:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:16:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:16:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:16:25 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:16:25 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:16:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:16:25 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:16:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:16:25 INFO2 take_spectra: Starting WAPP scan: 809200003 2008-Apr-01 00:16:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:16:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:16:25 LOG5 begin_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-01 00:16:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:16:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15386.00 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:16:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:16:27 LOG5 end_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:16:27 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:16:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:16:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:16:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:16:27 LOG5 begin_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:16:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:16:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:16:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:16:27 LOG5 end_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:16:27 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:16:27 LOG5 finish_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:16:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:16:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:16:27 LOG5 end_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Apr-01 00:16:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2008-Apr-01 00:16:27 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2008-Apr-01 00:16:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:16:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:16:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:16:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:16:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:16:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:16:28 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:16:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:16:28 LOG5 begin_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-01 00:16:28 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:16:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:16:28 INFO2 take_spectra: Starting WAPP scan: 809200004 2008-Apr-01 00:16:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:16:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:16:28 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-01 00:16:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:16:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:16:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0001.fits 2008-Apr-01 00:16:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0001.fits} 2008-Apr-01 00:16:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15389.00 2008-Apr-01 00:16:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.508 > 1.4)! 2008-Apr-01 00:16:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.232 1.374 1.455 1.410 2008-Apr-01 00:16:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.361 1.252 1.303 1.398 2008-Apr-01 00:16:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.263 1.346 1.343 1.465 2008-Apr-01 00:16:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.390 1.426 1.508 1.260 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.895 and 1.465 (still bad) 2008-Apr-01 00:16:32 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.094 2008-Apr-01 00:25:11 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 00:25:11.347 (seconds: 1511.347)!} 2008-Apr-01 00:25:11 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 00:25:11.347 (seconds: 1511.347)! 2008-Apr-01 00:25:12 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 1510.0 to 1511.0! 2008-Apr-01 00:25:13 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (1510.0 - 1512.0)! 2008-Apr-01 00:26:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:26:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:26:29 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:26:29 LOG5 end_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 LOG1 fixed_driftmap: New position: year = 2008.2519326247877 RA = 12:38:38.8 RA/Dec = 12:39:05.9 +03:28:46.1 2008-Apr-01 00:26:29 NOTE fixed_driftmap: Correcting ZA to 14:52:27.6 ... 2008-Apr-01 00:26:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8743425169 -CF 2008-Apr-01 00:26:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:26:29 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:26:29 LOG5 begin_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:26:29 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:26:29 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:26:29 LOG5 begin_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:26:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:26:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:26:29 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:26:29 LOG5 begin_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8743425169 -CF 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:26:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:26:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:26:29 LOG5 end_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Apr-01 00:26:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:26:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:26:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:26:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:26:30 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:26:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:26:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:26:30 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:26:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:26:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:26:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:26:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:26:30 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:26:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:26:30 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:26:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:26:30 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:26:30 LOG5 finish_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:26:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:26:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:26:30 LOG5 end_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:26:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:26:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:26:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:26:30 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:26:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:26:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:26:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:26:30 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:26:30 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:26:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:26:30 LOG5 begin_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:26:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:26:30 INFO2 take_spectra: Starting WAPP scan: 809200005 2008-Apr-01 00:26:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:26:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:26:30 LOG5 begin_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-01 00:26:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:26:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15991.00 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:26:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:26:32 LOG5 end_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:26:32 LOG5 end_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:26:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:26:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:26:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:26:32 LOG5 begin_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:26:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.512 > 1.4)! 2008-Apr-01 00:26:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.244 1.392 1.467 1.423 2008-Apr-01 00:26:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.919 0.950 1.033 2008-Apr-01 00:26:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.983 0.975 1.101 2008-Apr-01 00:26:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.393 1.432 1.512 1.269 2008-Apr-01 00:26:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:26:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:26:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:26:32 LOG5 end_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:26:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:26:32 LOG5 finish_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:26:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:26:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:26:32 LOG5 end_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Apr-01 00:26:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2008-Apr-01 00:26:32 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2008-Apr-01 00:26:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:26:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:26:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:26:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:26:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:26:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:26:33 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:26:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:26:33 LOG5 begin_task: Level: (2) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-01 00:26:33 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:26:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:26:33 INFO2 take_spectra: Starting WAPP scan: 809200006 2008-Apr-01 00:26:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:26:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:26:33 LOG5 begin_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-01 00:26:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:26:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:26:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0002.fits 2008-Apr-01 00:26:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15994.00 2008-Apr-01 00:26:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0002.fits} 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.409 (still bad) 2008-Apr-01 00:26:37 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.102 2008-Apr-01 00:36:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:36:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:36:34 LOG5 end_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:36:34 LOG5 end_task: Level: (2) ID = <10472> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 LOG1 fixed_driftmap: New position: year = 2008.2519517960809 RA = 12:48:45.4 RA/Dec = 12:49:12.5 +03:28:47.1 2008-Apr-01 00:36:34 NOTE fixed_driftmap: Correcting ZA to 14:52:26.6 ... 2008-Apr-01 00:36:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8740595959 -CF 2008-Apr-01 00:36:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:36:34 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:36:34 LOG5 begin_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:36:34 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:36:34 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:36:34 LOG5 begin_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:36:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:36:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:36:34 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:36:34 LOG5 begin_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8740595959 -CF 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:36:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:36:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:36:34 LOG5 end_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2008-Apr-01 00:36:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:36:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:36:34 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:36:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:36:34 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:36:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:36:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:36:35 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:36:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:36:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:36:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:36:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:36:35 LOG5 begin_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:36:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:36:35 LOG5 end_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:36:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:36:35 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:36:35 LOG5 finish_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:36:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:36:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:36:35 LOG5 end_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:36:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:36:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:36:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:36:35 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:36:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:36:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:36:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:36:35 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:36:35 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:36:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:36:35 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:36:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:36:35 INFO2 take_spectra: Starting WAPP scan: 809200007 2008-Apr-01 00:36:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:36:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:36:35 LOG5 begin_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-01 00:36:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:36:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16596.00 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:36:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:36:37 LOG5 end_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:36:37 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:36:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:36:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:36:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:36:37 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:36:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:36:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:36:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:36:37 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:36:37 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:36:37 LOG5 finish_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:36:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:36:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:36:37 LOG5 end_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Apr-01 00:36:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2008-Apr-01 00:36:37 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2008-Apr-01 00:36:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:36:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:36:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:36:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:36:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:36:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:36:38 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:36:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:36:38 LOG5 begin_task: Level: (2) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-01 00:36:38 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:36:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:36:38 INFO2 take_spectra: Starting WAPP scan: 809200008 2008-Apr-01 00:36:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:36:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:36:38 LOG5 begin_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-01 00:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:36:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.518 > 1.4)! 2008-Apr-01 00:36:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.389 1.473 1.418 2008-Apr-01 00:36:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.377 1.261 1.318 1.408 2008-Apr-01 00:36:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.360 1.354 1.474 2008-Apr-01 00:36:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.398 1.429 1.518 1.264 2008-Apr-01 00:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:36:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0003.fits 2008-Apr-01 00:36:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16599.00 2008-Apr-01 00:36:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0003.fits} 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.474 (still bad) 2008-Apr-01 00:36:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.102 2008-Apr-01 00:46:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:46:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:46:39 LOG5 end_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:46:39 LOG5 end_task: Level: (2) ID = <10483> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 LOG1 fixed_driftmap: New position: year = 2008.2519709673741 RA = 12:58:52.1 RA/Dec = 12:59:19.2 +03:28:48.4 2008-Apr-01 00:46:39 NOTE fixed_driftmap: Correcting ZA to 14:52:25.3 ... 2008-Apr-01 00:46:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8736864288 -CF 2008-Apr-01 00:46:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:46:39 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:46:39 LOG5 begin_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:46:39 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:46:39 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:46:39 LOG5 begin_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:46:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:46:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:46:39 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:46:39 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8736864288 -CF 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:46:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:46:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:46:39 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Apr-01 00:46:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:46:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:46:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:46:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:46:40 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-01 00:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:46:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:46:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:46:41 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:46:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:46:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:46:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:46:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:46:41 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:46:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:46:41 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:46:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:46:41 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:46:41 LOG5 finish_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:46:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:46:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:46:41 LOG5 end_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:46:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:46:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:46:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:46:41 LOG5 begin_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:46:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:46:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:46:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:46:41 LOG5 end_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:46:41 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:46:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:46:41 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-01 00:46:41 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:46:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:46:41 INFO2 take_spectra: Starting WAPP scan: 809200009 2008-Apr-01 00:46:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:46:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:46:42 LOG5 begin_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-01 00:46:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:46:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17203.00 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.522 > 1.4)! 2008-Apr-01 00:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.024 1.098 1.055 2008-Apr-01 00:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.375 1.257 1.307 1.400 2008-Apr-01 00:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.972 0.971 1.100 2008-Apr-01 00:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.405 1.436 1.522 1.268 2008-Apr-01 00:46:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:46:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:46:44 LOG5 end_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:46:44 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:46:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:46:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:46:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:46:44 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:46:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:46:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:46:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:46:44 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:46:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:46:44 LOG5 finish_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:46:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:46:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:46:44 LOG5 end_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Apr-01 00:46:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2008-Apr-01 00:46:44 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2008-Apr-01 00:46:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:46:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:46:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:46:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:46:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:46:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:46:45 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:46:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:46:45 LOG5 begin_task: Level: (2) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-01 00:46:45 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:46:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:46:45 INFO2 take_spectra: Starting WAPP scan: 809200010 2008-Apr-01 00:46:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:46:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:46:45 LOG5 begin_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-01 00:46:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:46:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:46:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0004.fits 2008-Apr-01 00:46:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17206.00 2008-Apr-01 00:46:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0004.fits} 2008-Apr-01 00:46:46 INFO5 check_wapp_levels: WAPP power levels are between 1.239 and 1.522 (still bad) 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:46:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.898 and 1.099 2008-Apr-01 00:56:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:56:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:56:46 LOG5 end_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:56:46 LOG5 end_task: Level: (2) ID = <10494> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 LOG1 fixed_driftmap: New position: year = 2008.2519902020433 RA = 13:09:00.8 RA/Dec = 13:09:27.9 +03:28:50.1 2008-Apr-01 00:56:46 NOTE fixed_driftmap: Correcting ZA to 14:52:23.6 ... 2008-Apr-01 00:56:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8732220629 -CF 2008-Apr-01 00:56:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 00:56:46 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 00:56:46 LOG5 begin_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 00:56:46 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 00:56:46 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 00:56:46 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 00:56:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 00:56:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:56:46 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 00:56:46 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8732220629 -CF 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:56:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 00:56:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 00:56:46 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Apr-01 00:56:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 00:56:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:56:47 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 00:56:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:56:47 LOG5 begin_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 00:56:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:56:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:56:47 LOG5 end_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:56:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 00:56:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 00:56:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:56:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 00:56:47 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 00:56:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 00:56:47 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 00:56:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 00:56:47 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 00:56:47 LOG5 finish_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 00:56:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:56:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 00:56:47 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 00:56:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 00:56:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 00:56:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:56:47 LOG5 begin_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:56:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 00:56:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:56:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:56:47 LOG5 end_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 00:56:47 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 00:56:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:56:47 LOG5 begin_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 00:56:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:56:47 INFO2 take_spectra: Starting WAPP scan: 809200011 2008-Apr-01 00:56:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 00:56:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:56:47 LOG5 begin_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-01 00:56:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:56:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17808.00 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.509 > 1.4)! 2008-Apr-01 00:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.023 1.094 1.053 2008-Apr-01 00:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.363 1.259 1.308 1.402 2008-Apr-01 00:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.973 0.972 1.097 2008-Apr-01 00:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.390 1.429 1.509 1.263 2008-Apr-01 00:56:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 00:56:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 00:56:49 LOG5 end_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 00:56:49 LOG5 end_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 00:56:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 00:56:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 00:56:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 00:56:49 LOG5 begin_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 00:56:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 00:56:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 00:56:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 00:56:49 LOG5 end_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 00:56:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 00:56:49 LOG5 finish_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 00:56:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 00:56:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 00:56:49 LOG5 end_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Apr-01 00:56:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 36 of 99 2008-Apr-01 00:56:49 LOG4 send_obs_status: To obs_status: <1> LOOP 36 2008-Apr-01 00:56:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 00:56:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 00:56:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 00:56:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 00:56:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 00:56:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 00:56:50 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 00:56:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 00:56:50 LOG5 begin_task: Level: (2) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-01 00:56:50 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 00:56:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 00:56:50 INFO2 take_spectra: Starting WAPP scan: 809200012 2008-Apr-01 00:56:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 00:56:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 00:56:50 LOG5 begin_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-01 00:56:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 00:56:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 00:56:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0005.fits 2008-Apr-01 00:56:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17811.00 2008-Apr-01 00:56:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0005.fits} 2008-Apr-01 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 1.240 and 1.509 (still bad) 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 00:56:53 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.098 2008-Apr-01 01:06:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:06:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:06:51 LOG5 end_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:06:51 LOG5 end_task: Level: (2) ID = <10505> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 LOG1 fixed_driftmap: New position: year = 2008.2520093733365 RA = 13:19:07.5 RA/Dec = 13:19:34.5 +03:28:52.1 2008-Apr-01 01:06:51 NOTE fixed_driftmap: Correcting ZA to 14:52:21.6 ... 2008-Apr-01 01:06:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8726704636 -CF 2008-Apr-01 01:06:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:06:51 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:06:51 LOG5 begin_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:06:51 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:06:51 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:06:51 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:06:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:06:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:06:51 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:06:51 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8726704636 -CF 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:06:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:06:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:06:51 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Apr-01 01:06:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:06:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:06:52 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:06:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:06:52 LOG5 begin_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:06:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:06:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:06:52 LOG5 end_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:06:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:06:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:06:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:06:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:06:52 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:06:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:06:52 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:06:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:06:52 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:06:52 LOG5 finish_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:06:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:06:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:06:52 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:06:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:06:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:06:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:06:52 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:06:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:06:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:06:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:06:52 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Apr-01 01:06:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:06:53 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:06:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:06:53 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-01 01:06:53 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:06:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:06:53 INFO2 take_spectra: Starting WAPP scan: 809200013 2008-Apr-01 01:06:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:06:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:06:53 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-01 01:06:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:06:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18414.00 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:06:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:06:55 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:06:55 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:06:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:06:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:06:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:06:55 LOG5 begin_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:06:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:06:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:06:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:06:55 LOG5 end_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:06:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:06:55 LOG5 finish_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:06:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:06:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:06:55 LOG5 end_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Apr-01 01:06:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 37 of 99 2008-Apr-01 01:06:55 LOG4 send_obs_status: To obs_status: <1> LOOP 37 2008-Apr-01 01:06:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:06:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:06:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:06:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:06:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:06:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:06:56 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:06:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:06:56 LOG5 begin_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Apr-01 01:06:56 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:06:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:06:56 INFO2 take_spectra: Starting WAPP scan: 809200014 2008-Apr-01 01:06:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:06:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:06:56 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Apr-01 01:06:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:06:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.523 > 1.4)! 2008-Apr-01 01:06:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.235 1.388 1.467 1.420 2008-Apr-01 01:06:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.374 1.263 1.310 1.406 2008-Apr-01 01:06:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.977 0.975 1.100 2008-Apr-01 01:06:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.402 1.438 1.523 1.269 2008-Apr-01 01:06:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:06:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0006.fits 2008-Apr-01 01:06:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18417.00 2008-Apr-01 01:06:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0006.fits} 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.918 and 1.523 (still bad) 2008-Apr-01 01:06:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:07:00 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.099 2008-Apr-01 01:16:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:16:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:16:57 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:16:57 LOG5 end_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 LOG1 fixed_driftmap: New position: year = 2008.2520285763176 RA = 13:29:15.2 RA/Dec = 13:29:42.2 +03:28:54.4 2008-Apr-01 01:16:57 NOTE fixed_driftmap: Correcting ZA to 14:52:19.3 ... 2008-Apr-01 01:16:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8720301888 -CF 2008-Apr-01 01:16:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:16:57 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:16:57 LOG5 begin_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:16:57 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:16:57 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:16:57 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:16:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:16:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:16:57 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:16:57 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8720301888 -CF 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:16:57 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:16:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:16:57 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Apr-01 01:16:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:16:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:16:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:16:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:16:57 LOG5 begin_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:16:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:16:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:16:58 LOG5 end_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:16:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:16:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:16:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:16:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:16:58 LOG5 begin_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:16:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:16:58 LOG5 end_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:16:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:16:58 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:16:58 LOG5 finish_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:16:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:16:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:16:58 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:16:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:16:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:16:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:16:58 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:16:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:16:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:16:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:16:58 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Apr-01 01:16:58 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:16:58 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:16:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:16:58 LOG5 begin_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2008-Apr-01 01:16:59 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:16:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:16:59 INFO2 take_spectra: Starting WAPP scan: 809200015 2008-Apr-01 01:16:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:16:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:16:59 LOG5 begin_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2008-Apr-01 01:16:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:16:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19020.00 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.510 > 1.4)! 2008-Apr-01 01:17:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.027 1.091 1.051 2008-Apr-01 01:17:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.373 1.258 1.307 1.400 2008-Apr-01 01:17:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.269 1.350 1.344 1.469 2008-Apr-01 01:17:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.393 1.423 1.510 1.258 2008-Apr-01 01:17:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:17:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:17:01 LOG5 end_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:17:01 LOG5 end_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:17:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:17:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:17:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:17:01 LOG5 begin_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:17:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:17:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:17:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:17:01 LOG5 end_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:17:01 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:17:01 LOG5 finish_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:17:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:17:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:17:01 LOG5 end_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Apr-01 01:17:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 38 of 99 2008-Apr-01 01:17:01 LOG4 send_obs_status: To obs_status: <1> LOOP 38 2008-Apr-01 01:17:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:17:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:17:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:17:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:17:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:17:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:17:02 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:17:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:17:02 LOG5 begin_task: Level: (2) ID = <10527> Status = 0 0 0 0 ok 2008-Apr-01 01:17:02 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:17:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:17:02 INFO2 take_spectra: Starting WAPP scan: 809200016 2008-Apr-01 01:17:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:17:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:17:02 LOG5 begin_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Apr-01 01:17:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:17:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:17:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0007.fits 2008-Apr-01 01:17:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19023.00 2008-Apr-01 01:17:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0007.fits} 2008-Apr-01 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 1.237 and 1.510 (still bad) 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:17:05 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.097 2008-Apr-01 01:27:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:27:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:27:03 LOG5 end_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:27:03 LOG5 end_task: Level: (2) ID = <10527> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 LOG1 fixed_driftmap: New position: year = 2008.2520477792989 RA = 13:39:22.9 RA/Dec = 13:39:49.8 +03:28:57.0 2008-Apr-01 01:27:03 NOTE fixed_driftmap: Correcting ZA to 14:52:16.7 ... 2008-Apr-01 01:27:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8713033323 -CF 2008-Apr-01 01:27:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:27:03 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:27:03 LOG5 begin_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:27:03 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:27:03 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:27:03 LOG5 begin_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:27:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:27:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:27:03 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:27:03 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8713033323 -CF 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:27:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:27:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:27:03 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Apr-01 01:27:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:27:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:27:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:27:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:27:03 LOG5 begin_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:27:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:27:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:27:04 LOG5 end_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:27:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:27:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:27:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:27:04 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:27:04 LOG5 begin_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:27:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:27:04 LOG5 end_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:27:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:27:04 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:27:04 LOG5 finish_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:27:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:27:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:27:04 LOG5 end_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:27:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:27:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:27:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:27:04 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:27:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:27:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:27:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:27:04 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:27:04 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:27:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:27:04 LOG5 begin_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:27:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:27:04 INFO2 take_spectra: Starting WAPP scan: 809200017 2008-Apr-01 01:27:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:27:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:27:04 LOG5 begin_task: Level: (4) ID = <10536> Status = 0 0 0 0 ok 2008-Apr-01 01:27:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:27:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19625.00 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:27:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:27:06 LOG5 end_task: Level: (4) ID = <10536> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:27:06 LOG5 end_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:27:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:27:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:27:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:27:06 LOG5 begin_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:27:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:27:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.507 > 1.4)! 2008-Apr-01 01:27:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.240 1.373 1.452 1.042 2008-Apr-01 01:27:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.361 1.253 1.302 1.394 2008-Apr-01 01:27:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.262 1.341 1.341 1.464 2008-Apr-01 01:27:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.385 1.415 1.507 1.252 2008-Apr-01 01:27:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:27:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:27:06 LOG5 end_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:27:06 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:27:06 LOG5 finish_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:27:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:27:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:27:06 LOG5 end_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Apr-01 01:27:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 39 of 99 2008-Apr-01 01:27:06 LOG4 send_obs_status: To obs_status: <1> LOOP 39 2008-Apr-01 01:27:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:27:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:27:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:27:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:27:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:27:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:27:07 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:27:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:27:07 LOG5 begin_task: Level: (2) ID = <10538> Status = 0 0 0 0 ok 2008-Apr-01 01:27:07 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:27:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:27:07 INFO2 take_spectra: Starting WAPP scan: 809200018 2008-Apr-01 01:27:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:27:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:27:07 LOG5 begin_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Apr-01 01:27:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:27:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:27:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0008.fits 2008-Apr-01 01:27:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0008.fits} 2008-Apr-01 01:27:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19628.00 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:27:09 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.091 2008-Apr-01 01:37:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:37:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:37:08 LOG5 end_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:37:08 LOG5 end_task: Level: (2) ID = <10538> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 LOG1 fixed_driftmap: New position: year = 2008.2520669505921 RA = 13:49:29.6 RA/Dec = 13:49:56.5 +03:28:59.9 2008-Apr-01 01:37:08 NOTE fixed_driftmap: Correcting ZA to 14:52:13.8 ... 2008-Apr-01 01:37:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8704927204 -CF 2008-Apr-01 01:37:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:37:08 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:37:08 LOG5 begin_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:37:08 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:37:08 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:37:08 LOG5 begin_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:37:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:37:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:37:08 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:37:08 LOG5 begin_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8704927204 -CF 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:37:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:37:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:37:08 LOG5 end_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Apr-01 01:37:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:37:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:37:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:37:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:37:08 LOG5 begin_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:37:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:37:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:37:09 LOG5 end_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:37:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:37:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:37:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:37:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:37:09 LOG5 begin_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:37:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:37:09 LOG5 end_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:37:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:37:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:37:09 LOG5 finish_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:37:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:37:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:37:09 LOG5 end_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:37:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:37:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:37:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:37:09 LOG5 begin_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:37:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:37:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:37:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:37:09 LOG5 end_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:37:09 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:37:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:37:09 LOG5 begin_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:37:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:37:09 INFO2 take_spectra: Starting WAPP scan: 809200019 2008-Apr-01 01:37:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:37:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:37:09 LOG5 begin_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2008-Apr-01 01:37:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:37:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20230.00 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:37:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:37:11 LOG5 end_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:37:11 LOG5 end_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:37:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:37:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:37:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:37:11 LOG5 begin_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:37:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:37:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:37:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:37:11 LOG5 end_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:37:11 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:37:11 LOG5 finish_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:37:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:37:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:37:11 LOG5 end_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Apr-01 01:37:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 40 of 99 2008-Apr-01 01:37:11 LOG4 send_obs_status: To obs_status: <1> LOOP 40 2008-Apr-01 01:37:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:37:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:37:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:37:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:37:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:37:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:37:12 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:37:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:37:12 LOG5 begin_task: Level: (2) ID = <10549> Status = 0 0 0 0 ok 2008-Apr-01 01:37:12 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:37:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:37:12 INFO2 take_spectra: Starting WAPP scan: 809200020 2008-Apr-01 01:37:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:37:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:37:12 LOG5 begin_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2008-Apr-01 01:37:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:37:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.505 > 1.4)! 2008-Apr-01 01:37:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.236 1.375 1.459 1.413 2008-Apr-01 01:37:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.359 1.256 1.307 1.400 2008-Apr-01 01:37:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.348 1.346 1.465 2008-Apr-01 01:37:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.387 1.420 1.505 1.258 2008-Apr-01 01:37:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:37:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20233.00 2008-Apr-01 01:37:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0009.fits 2008-Apr-01 01:37:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0009.fits} 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.894 and 1.505 (still bad) 2008-Apr-01 01:37:16 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.093 2008-Apr-01 01:47:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:47:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:47:13 LOG5 end_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:47:13 LOG5 end_task: Level: (2) ID = <10549> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG1 fixed_driftmap: New position: year = 2008.2520861218852 RA = 13:59:36.3 RA/Dec = 14:00:03.1 +03:29:03.1 2008-Apr-01 01:47:13 NOTE fixed_driftmap: Correcting ZA to 14:52:10.6 ... 2008-Apr-01 01:47:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8695988050 -CF 2008-Apr-01 01:47:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:47:13 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:47:13 LOG5 begin_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:47:13 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:47:13 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:47:13 LOG5 begin_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:47:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:47:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:47:13 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:47:13 LOG5 begin_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8695988050 -CF 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:47:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:47:13 LOG5 end_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:47:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:47:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:47:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:47:13 LOG5 begin_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Apr-01 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:47:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:47:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:47:14 LOG5 end_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:47:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:47:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:47:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:47:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:47:14 LOG5 begin_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:47:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:47:14 LOG5 end_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:47:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:47:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:47:14 LOG5 finish_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:47:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:47:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:47:14 LOG5 end_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:47:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:47:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:47:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:47:14 LOG5 begin_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:47:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:47:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:47:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:47:14 LOG5 end_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:47:14 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:47:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:47:14 LOG5 begin_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:47:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:47:14 INFO2 take_spectra: Starting WAPP scan: 809200021 2008-Apr-01 01:47:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:47:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:47:14 LOG5 begin_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Apr-01 01:47:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:47:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20835.00 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:47:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:47:16 LOG5 end_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:47:16 LOG5 end_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:47:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:47:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:47:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:47:16 LOG5 begin_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:47:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:47:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:47:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:47:16 LOG5 end_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:47:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:47:16 LOG5 finish_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:47:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:47:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:47:16 LOG5 end_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Apr-01 01:47:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 41 of 99 2008-Apr-01 01:47:16 LOG4 send_obs_status: To obs_status: <1> LOOP 41 2008-Apr-01 01:47:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:47:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:47:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:47:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:47:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:47:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:47:17 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:47:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:47:17 LOG5 begin_task: Level: (2) ID = <10560> Status = 0 0 0 0 ok 2008-Apr-01 01:47:17 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:47:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:47:17 INFO2 take_spectra: Starting WAPP scan: 809200022 2008-Apr-01 01:47:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:47:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:47:17 LOG5 begin_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Apr-01 01:47:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:47:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:47:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.507 > 1.4)! 2008-Apr-01 01:47:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.235 1.384 1.464 1.415 2008-Apr-01 01:47:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.370 1.261 1.308 1.403 2008-Apr-01 01:47:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.276 1.363 1.349 1.471 2008-Apr-01 01:47:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.388 1.425 1.507 1.260 2008-Apr-01 01:47:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0010.fits 2008-Apr-01 01:47:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0010.fits} 2008-Apr-01 01:47:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20838.00 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.893 and 1.507 (still bad) 2008-Apr-01 01:47:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.893 and 1.102 2008-Apr-01 01:57:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:57:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:57:18 LOG5 end_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:57:18 LOG5 end_task: Level: (2) ID = <10560> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 LOG1 fixed_driftmap: New position: year = 2008.2521052931781 RA = 14:09:43.0 RA/Dec = 14:10:09.8 +03:29:06.7 2008-Apr-01 01:57:18 NOTE fixed_driftmap: Correcting ZA to 14:52:07.0 ... 2008-Apr-01 01:57:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8686233203 -CF 2008-Apr-01 01:57:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 01:57:18 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 01:57:18 LOG5 begin_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 01:57:18 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 01:57:18 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 01:57:18 LOG5 begin_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 01:57:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 01:57:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:57:18 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 01:57:18 LOG5 begin_task: Level: (4) ID = <10564> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8686233203 -CF 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:57:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 01:57:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 01:57:18 LOG5 end_task: Level: (4) ID = <10564> Status = 0 0 0 0 ok 2008-Apr-01 01:57:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 01:57:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:57:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 01:57:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:57:18 LOG5 begin_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 01:57:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:57:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:57:19 LOG5 end_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:57:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 01:57:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 01:57:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:57:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 01:57:19 LOG5 begin_task: Level: (4) ID = <10566> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 01:57:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 01:57:19 LOG5 end_task: Level: (4) ID = <10566> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 01:57:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 01:57:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 01:57:19 LOG5 finish_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 01:57:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:57:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 01:57:19 LOG5 end_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 01:57:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 01:57:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 01:57:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:57:19 LOG5 begin_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:57:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 01:57:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:57:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:57:19 LOG5 end_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 01:57:19 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 01:57:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:57:19 LOG5 begin_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 01:57:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:57:19 INFO2 take_spectra: Starting WAPP scan: 809200023 2008-Apr-01 01:57:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 01:57:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:57:19 LOG5 begin_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2008-Apr-01 01:57:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:57:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21440.00 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 01:57:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 01:57:21 LOG5 end_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 01:57:21 LOG5 end_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 01:57:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 01:57:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 01:57:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 01:57:21 LOG5 begin_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.506 > 1.4)! 2008-Apr-01 01:57:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.235 1.376 1.456 1.408 2008-Apr-01 01:57:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.366 1.254 1.304 1.398 2008-Apr-01 01:57:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.346 1.343 1.467 2008-Apr-01 01:57:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.388 1.420 1.506 1.256 2008-Apr-01 01:57:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 01:57:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 01:57:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 01:57:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 01:57:21 LOG5 end_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 01:57:21 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 01:57:21 LOG5 finish_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 01:57:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 01:57:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 01:57:21 LOG5 end_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Apr-01 01:57:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 42 of 99 2008-Apr-01 01:57:21 LOG4 send_obs_status: To obs_status: <1> LOOP 42 2008-Apr-01 01:57:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 01:57:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 01:57:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 01:57:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 01:57:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 01:57:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 01:57:22 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 01:57:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 01:57:22 LOG5 begin_task: Level: (2) ID = <10571> Status = 0 0 0 0 ok 2008-Apr-01 01:57:22 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 01:57:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 01:57:22 INFO2 take_spectra: Starting WAPP scan: 809200024 2008-Apr-01 01:57:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 01:57:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 01:57:22 LOG5 begin_task: Level: (3) ID = <10572> Status = 0 0 0 0 ok 2008-Apr-01 01:57:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 01:57:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 01:57:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0011.fits 2008-Apr-01 01:57:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0011.fits} 2008-Apr-01 01:57:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21443.00 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 01:57:24 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.897 and 1.095 2008-Apr-01 02:07:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:07:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:07:23 LOG5 end_task: Level: (3) ID = <10572> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:07:23 LOG5 end_task: Level: (2) ID = <10571> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG1 fixed_driftmap: New position: year = 2008.2521244644713 RA = 14:19:49.7 RA/Dec = 14:20:16.5 +03:29:10.5 2008-Apr-01 02:07:23 NOTE fixed_driftmap: Correcting ZA to 14:52:03.2 ... 2008-Apr-01 02:07:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8675681636 -CF 2008-Apr-01 02:07:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:07:23 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:07:23 LOG5 begin_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:07:23 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:07:23 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:07:23 LOG5 begin_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:07:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:07:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:07:23 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:07:23 LOG5 begin_task: Level: (4) ID = <10575> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8675681636 -CF 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 02:07:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:07:23 LOG5 end_task: Level: (4) ID = <10575> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:07:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:07:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:07:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:07:23 LOG5 begin_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2008-Apr-01 02:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:07:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:07:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:07:24 LOG5 end_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:07:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:07:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:07:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:07:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:07:24 LOG5 begin_task: Level: (4) ID = <10577> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:07:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:07:24 LOG5 end_task: Level: (4) ID = <10577> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:07:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:07:24 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:07:24 LOG5 finish_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:07:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:07:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:07:24 LOG5 end_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:07:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:07:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:07:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:07:24 LOG5 begin_task: Level: (3) ID = <10578> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:07:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:07:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:07:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:07:24 LOG5 end_task: Level: (3) ID = <10578> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:07:24 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:07:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:07:24 LOG5 begin_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:07:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:07:24 INFO2 take_spectra: Starting WAPP scan: 809200025 2008-Apr-01 02:07:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:07:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:07:24 LOG5 begin_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2008-Apr-01 02:07:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:07:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22045.00 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:07:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:07:26 LOG5 end_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:07:26 LOG5 end_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:07:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:07:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:07:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:07:26 LOG5 begin_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:07:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:07:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:07:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:07:26 LOG5 end_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:07:26 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:07:26 LOG5 finish_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:07:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:07:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:07:26 LOG5 end_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Apr-01 02:07:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 43 of 99 2008-Apr-01 02:07:26 LOG4 send_obs_status: To obs_status: <1> LOOP 43 2008-Apr-01 02:07:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:07:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:07:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:07:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:07:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:07:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:07:27 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:07:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:07:27 LOG5 begin_task: Level: (2) ID = <10582> Status = 0 0 0 0 ok 2008-Apr-01 02:07:27 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:07:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:07:27 INFO2 take_spectra: Starting WAPP scan: 809200026 2008-Apr-01 02:07:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:07:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:07:27 LOG5 begin_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2008-Apr-01 02:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:07:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.503 > 1.4)! 2008-Apr-01 02:07:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.240 1.369 1.452 1.405 2008-Apr-01 02:07:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.361 1.254 1.302 1.393 2008-Apr-01 02:07:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.261 1.343 1.343 1.467 2008-Apr-01 02:07:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.385 1.415 1.503 1.252 2008-Apr-01 02:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:07:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0012.fits 2008-Apr-01 02:07:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0012.fits} 2008-Apr-01 02:07:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22048.00 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.898 and 1.503 (still bad) 2008-Apr-01 02:07:31 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.899 and 1.094 2008-Apr-01 02:17:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:17:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:17:28 LOG5 end_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:17:28 LOG5 end_task: Level: (2) ID = <10582> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 LOG1 fixed_driftmap: New position: year = 2008.2521436357645 RA = 14:29:56.4 RA/Dec = 14:30:23.1 +03:29:14.5 2008-Apr-01 02:17:28 NOTE fixed_driftmap: Correcting ZA to 14:51:59.2 ... 2008-Apr-01 02:17:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8664353943 -CF 2008-Apr-01 02:17:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:17:28 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:17:28 LOG5 begin_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:17:28 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:17:28 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:17:28 LOG5 begin_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:17:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:17:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:17:28 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:17:28 LOG5 begin_task: Level: (4) ID = <10586> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8664353943 -CF 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:17:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 02:17:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:17:28 LOG5 end_task: Level: (4) ID = <10586> Status = 0 0 0 0 ok 2008-Apr-01 02:17:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:17:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:17:28 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:17:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:17:28 LOG5 begin_task: Level: (4) ID = <10587> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:17:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:17:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:17:29 LOG5 end_task: Level: (4) ID = <10587> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:17:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:17:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:17:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:17:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:17:29 LOG5 begin_task: Level: (4) ID = <10588> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:17:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:17:29 LOG5 end_task: Level: (4) ID = <10588> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:17:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:17:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:17:29 LOG5 finish_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:17:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:17:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:17:29 LOG5 end_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:17:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:17:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:17:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:17:29 LOG5 begin_task: Level: (3) ID = <10589> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:17:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:17:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:17:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:17:29 LOG5 end_task: Level: (3) ID = <10589> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:17:29 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:17:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:17:29 LOG5 begin_task: Level: (3) ID = <10590> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:17:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:17:29 INFO2 take_spectra: Starting WAPP scan: 809200027 2008-Apr-01 02:17:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:17:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:17:29 LOG5 begin_task: Level: (4) ID = <10591> Status = 0 0 0 0 ok 2008-Apr-01 02:17:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:17:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22650.00 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:17:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:17:31 LOG5 end_task: Level: (4) ID = <10591> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:17:31 LOG5 end_task: Level: (3) ID = <10590> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:17:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:17:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:17:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:17:31 LOG5 begin_task: Level: (3) ID = <10592> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:17:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:17:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:17:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:17:31 LOG5 end_task: Level: (3) ID = <10592> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:17:31 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:17:31 LOG5 finish_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:17:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:17:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:17:31 LOG5 end_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Apr-01 02:17:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 44 of 99 2008-Apr-01 02:17:31 LOG4 send_obs_status: To obs_status: <1> LOOP 44 2008-Apr-01 02:17:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:17:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:17:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:17:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:17:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:17:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:17:32 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:17:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:17:32 LOG5 begin_task: Level: (2) ID = <10593> Status = 0 0 0 0 ok 2008-Apr-01 02:17:32 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:17:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:17:32 INFO2 take_spectra: Starting WAPP scan: 809200028 2008-Apr-01 02:17:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:17:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:17:32 LOG5 begin_task: Level: (3) ID = <10594> Status = 0 0 0 0 ok 2008-Apr-01 02:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:17:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0013.fits 2008-Apr-01 02:17:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22653.00 2008-Apr-01 02:17:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0013.fits} 2008-Apr-01 02:17:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.511 > 1.4)! 2008-Apr-01 02:17:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.240 1.385 1.465 1.417 2008-Apr-01 02:17:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.363 1.262 1.312 1.404 2008-Apr-01 02:17:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.271 1.355 1.350 1.471 2008-Apr-01 02:17:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.391 1.427 1.511 1.263 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.905 and 1.511 (still bad) 2008-Apr-01 02:17:36 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.098 2008-Apr-01 02:24:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.413 > 1.4)! 2008-Apr-01 02:24:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.031 1.103 1.058 2008-Apr-01 02:24:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.922 0.974 1.046 2008-Apr-01 02:24:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.341 1.413 0.999 1.124 2008-Apr-01 02:24:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 1.030 1.092 0.913 2008-Apr-01 02:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.909 and 1.446 (still bad) 2008-Apr-01 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.908 and 1.423 (still bad) 2008-Apr-01 02:24:27 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.336 2008-Apr-01 02:27:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:27:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:27:33 LOG5 end_task: Level: (3) ID = <10594> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:27:33 LOG5 end_task: Level: (2) ID = <10593> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG1 fixed_driftmap: New position: year = 2008.2521628070576 RA = 14:40:03.1 RA/Dec = 14:40:29.8 +03:29:18.9 2008-Apr-01 02:27:33 NOTE fixed_driftmap: Correcting ZA to 14:51:54.8 ... 2008-Apr-01 02:27:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8652272173 -CF 2008-Apr-01 02:27:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:27:33 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:27:33 LOG5 begin_task: Level: (2) ID = <10595> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:27:33 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:27:33 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:27:33 LOG5 begin_task: Level: (3) ID = <10596> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:27:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:27:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:27:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:27:33 LOG5 begin_task: Level: (4) ID = <10597> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8652272173 -CF 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 02:27:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:27:33 LOG5 end_task: Level: (4) ID = <10597> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:27:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:27:33 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:27:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:27:33 LOG5 begin_task: Level: (4) ID = <10598> Status = 0 0 0 0 ok 2008-Apr-01 02:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:27:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:27:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:27:34 LOG5 end_task: Level: (4) ID = <10598> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:27:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:27:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:27:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:27:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:27:34 LOG5 begin_task: Level: (4) ID = <10599> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:27:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:27:34 LOG5 end_task: Level: (4) ID = <10599> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:27:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:27:34 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:27:34 LOG5 finish_task: Level: (3) ID = <10596> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:27:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:27:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:27:34 LOG5 end_task: Level: (3) ID = <10596> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:27:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:27:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:27:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:27:34 LOG5 begin_task: Level: (3) ID = <10600> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:27:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:27:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:27:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:27:34 LOG5 end_task: Level: (3) ID = <10600> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:27:34 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:27:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:27:34 LOG5 begin_task: Level: (3) ID = <10601> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:27:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:27:34 INFO2 take_spectra: Starting WAPP scan: 809200029 2008-Apr-01 02:27:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:27:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:27:34 LOG5 begin_task: Level: (4) ID = <10602> Status = 0 0 0 0 ok 2008-Apr-01 02:27:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:27:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23255.00 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:27:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:27:36 LOG5 end_task: Level: (4) ID = <10602> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:27:36 LOG5 end_task: Level: (3) ID = <10601> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:27:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:27:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:27:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:27:36 LOG5 begin_task: Level: (3) ID = <10603> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:27:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:27:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.475 > 1.4)! 2008-Apr-01 02:27:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.388 1.475 1.418 2008-Apr-01 02:27:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.375 1.259 1.317 1.407 2008-Apr-01 02:27:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.281 1.354 1.357 1.474 2008-Apr-01 02:27:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 1.036 1.100 0.916 2008-Apr-01 02:27:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:27:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:27:36 LOG5 end_task: Level: (3) ID = <10603> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:27:36 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:27:36 LOG5 finish_task: Level: (2) ID = <10595> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:27:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:27:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:27:36 LOG5 end_task: Level: (2) ID = <10595> Status = 0 0 0 0 ok 2008-Apr-01 02:27:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 45 of 99 2008-Apr-01 02:27:36 LOG4 send_obs_status: To obs_status: <1> LOOP 45 2008-Apr-01 02:27:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:27:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:27:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:27:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:27:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:27:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:27:37 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:27:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:27:37 LOG5 begin_task: Level: (2) ID = <10604> Status = 0 0 0 0 ok 2008-Apr-01 02:27:37 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:27:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:27:37 INFO2 take_spectra: Starting WAPP scan: 809200030 2008-Apr-01 02:27:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:27:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:27:37 LOG5 begin_task: Level: (3) ID = <10605> Status = 0 0 0 0 ok 2008-Apr-01 02:27:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:27:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:27:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0014.fits 2008-Apr-01 02:27:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23258.00 2008-Apr-01 02:27:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0014.fits} 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.903 and 1.527 (still bad) 2008-Apr-01 02:27:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.907 and 1.105 2008-Apr-01 02:37:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:37:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:37:38 LOG5 end_task: Level: (3) ID = <10605> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:37:38 LOG5 end_task: Level: (2) ID = <10604> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 LOG1 fixed_driftmap: New position: year = 2008.2521819783508 RA = 14:50:09.8 RA/Dec = 14:50:36.4 +03:29:23.5 2008-Apr-01 02:37:38 NOTE fixed_driftmap: Correcting ZA to 14:51:50.2 ... 2008-Apr-01 02:37:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8639459762 -CF 2008-Apr-01 02:37:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:37:38 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:37:38 LOG5 begin_task: Level: (2) ID = <10606> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:37:38 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:37:38 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:37:38 LOG5 begin_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:37:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:37:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:37:38 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:37:38 LOG5 begin_task: Level: (4) ID = <10608> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8639459762 -CF 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:37:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 02:37:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:37:38 LOG5 end_task: Level: (4) ID = <10608> Status = 0 0 0 0 ok 2008-Apr-01 02:37:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:37:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:37:38 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:37:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:37:38 LOG5 begin_task: Level: (4) ID = <10609> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:37:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:37:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:37:39 LOG5 end_task: Level: (4) ID = <10609> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:37:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:37:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:37:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:37:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:37:39 LOG5 begin_task: Level: (4) ID = <10610> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:37:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:37:39 LOG5 end_task: Level: (4) ID = <10610> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:37:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:37:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:37:39 LOG5 finish_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:37:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:37:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:37:39 LOG5 end_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:37:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:37:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:37:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:37:39 LOG5 begin_task: Level: (3) ID = <10611> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:37:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:37:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:37:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:37:39 LOG5 end_task: Level: (3) ID = <10611> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:37:39 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:37:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:37:39 LOG5 begin_task: Level: (3) ID = <10612> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:37:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:37:39 INFO2 take_spectra: Starting WAPP scan: 809200031 2008-Apr-01 02:37:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:37:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:37:39 LOG5 begin_task: Level: (4) ID = <10613> Status = 0 0 0 0 ok 2008-Apr-01 02:37:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:37:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23860.00 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:37:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:37:41 LOG5 end_task: Level: (4) ID = <10613> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:37:41 LOG5 end_task: Level: (3) ID = <10612> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:37:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:37:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:37:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:37:41 LOG5 begin_task: Level: (3) ID = <10614> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:37:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:37:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:37:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:37:41 LOG5 end_task: Level: (3) ID = <10614> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:37:41 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:37:41 LOG5 finish_task: Level: (2) ID = <10606> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:37:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:37:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:37:41 LOG5 end_task: Level: (2) ID = <10606> Status = 0 0 0 0 ok 2008-Apr-01 02:37:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 46 of 99 2008-Apr-01 02:37:41 LOG4 send_obs_status: To obs_status: <1> LOOP 46 2008-Apr-01 02:37:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:37:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:37:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:37:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:37:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:37:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:37:42 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:37:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:37:42 LOG5 begin_task: Level: (2) ID = <10615> Status = 0 0 0 0 ok 2008-Apr-01 02:37:42 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:37:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:37:42 INFO2 take_spectra: Starting WAPP scan: 809200032 2008-Apr-01 02:37:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:37:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:37:42 LOG5 begin_task: Level: (3) ID = <10616> Status = 0 0 0 0 ok 2008-Apr-01 02:37:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:37:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.517 > 1.4)! 2008-Apr-01 02:37:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.238 1.382 1.464 1.410 2008-Apr-01 02:37:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.373 1.258 1.312 1.403 2008-Apr-01 02:37:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.273 1.351 1.349 1.472 2008-Apr-01 02:37:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.396 1.425 1.517 1.259 2008-Apr-01 02:37:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:37:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0015.fits 2008-Apr-01 02:37:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23863.00 2008-Apr-01 02:37:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0015.fits} 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 1.238 and 1.517 (still bad) 2008-Apr-01 02:37:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.099 2008-Apr-01 02:47:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:47:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:47:43 LOG5 end_task: Level: (3) ID = <10616> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:47:43 LOG5 end_task: Level: (2) ID = <10615> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG1 fixed_driftmap: New position: year = 2008.252201149644 RA = 15:00:16.5 RA/Dec = 15:00:43.1 +03:29:28.4 2008-Apr-01 02:47:43 NOTE fixed_driftmap: Correcting ZA to 14:51:45.3 ... 2008-Apr-01 02:47:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8625941715 -CF 2008-Apr-01 02:47:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:47:43 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:47:43 LOG5 begin_task: Level: (2) ID = <10617> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:47:43 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:47:43 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:47:43 LOG5 begin_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:47:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:47:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:47:43 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:47:43 LOG5 begin_task: Level: (4) ID = <10619> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8625941715 -CF 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-01 02:47:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:47:43 LOG5 end_task: Level: (4) ID = <10619> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:47:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:47:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:47:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:47:43 LOG5 begin_task: Level: (4) ID = <10620> Status = 0 0 0 0 ok 2008-Apr-01 02:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:47:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:47:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:47:44 LOG5 end_task: Level: (4) ID = <10620> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:47:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:47:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:47:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:47:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:47:44 LOG5 begin_task: Level: (4) ID = <10621> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:47:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:47:44 LOG5 end_task: Level: (4) ID = <10621> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:47:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:47:44 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:47:44 LOG5 finish_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:47:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:47:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:47:44 LOG5 end_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:47:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:47:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:47:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:47:44 LOG5 begin_task: Level: (3) ID = <10622> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:47:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:47:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:47:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:47:44 LOG5 end_task: Level: (3) ID = <10622> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:47:44 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:47:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:47:44 LOG5 begin_task: Level: (3) ID = <10623> Status = 0 0 0 0 ok 2008-Apr-01 02:47:44 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:47:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:47:44 INFO2 take_spectra: Starting WAPP scan: 809200033 2008-Apr-01 02:47:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:47:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:47:45 LOG5 begin_task: Level: (4) ID = <10624> Status = 0 0 0 0 ok 2008-Apr-01 02:47:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:47:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24466.00 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:47:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:47:47 LOG5 end_task: Level: (4) ID = <10624> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:47:47 LOG5 end_task: Level: (3) ID = <10623> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:47:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:47:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:47:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:47:47 LOG5 begin_task: Level: (3) ID = <10625> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:47:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:47:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:47:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:47:47 LOG5 end_task: Level: (3) ID = <10625> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:47:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:47:47 LOG5 finish_task: Level: (2) ID = <10617> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:47:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:47:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:47:47 LOG5 end_task: Level: (2) ID = <10617> Status = 0 0 0 0 ok 2008-Apr-01 02:47:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 47 of 99 2008-Apr-01 02:47:47 LOG4 send_obs_status: To obs_status: <1> LOOP 47 2008-Apr-01 02:47:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:47:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:47:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:47:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:47:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:47:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:47:48 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:47:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:47:48 LOG5 begin_task: Level: (2) ID = <10626> Status = 0 0 0 0 ok 2008-Apr-01 02:47:48 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:47:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:47:48 INFO2 take_spectra: Starting WAPP scan: 809200034 2008-Apr-01 02:47:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:47:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:47:48 LOG5 begin_task: Level: (3) ID = <10627> Status = 0 0 0 0 ok 2008-Apr-01 02:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:47:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0016.fits 2008-Apr-01 02:47:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24469.00 2008-Apr-01 02:47:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0016.fits} 2008-Apr-01 02:47:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.508 > 1.4)! 2008-Apr-01 02:47:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.237 1.377 1.453 1.413 2008-Apr-01 02:47:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.356 1.264 1.306 1.407 2008-Apr-01 02:47:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.265 1.351 1.344 1.482 2008-Apr-01 02:47:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.386 1.430 1.508 1.265 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:47:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.901 and 1.109 2008-Apr-01 02:57:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:57:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:57:49 LOG5 end_task: Level: (3) ID = <10627> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:57:49 LOG5 end_task: Level: (2) ID = <10626> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG1 fixed_driftmap: New position: year = 2008.252220352625 RA = 15:10:24.3 RA/Dec = 15:10:50.7 +03:29:33.5 2008-Apr-01 02:57:49 NOTE fixed_driftmap: Correcting ZA to 14:51:40.2 ... 2008-Apr-01 02:57:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8611720291 -CF 2008-Apr-01 02:57:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 02:57:49 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 02:57:49 LOG5 begin_task: Level: (2) ID = <10628> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 02:57:49 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 02:57:49 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 02:57:49 LOG5 begin_task: Level: (3) ID = <10629> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 02:57:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 02:57:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:57:49 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 02:57:49 LOG5 begin_task: Level: (4) ID = <10630> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8611720291 -CF 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 02:57:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 02:57:49 LOG5 end_task: Level: (4) ID = <10630> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 02:57:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:57:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 02:57:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:57:49 LOG5 begin_task: Level: (4) ID = <10631> Status = 0 0 0 0 ok 2008-Apr-01 02:57:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 02:57:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:57:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:57:50 LOG5 end_task: Level: (4) ID = <10631> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:57:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 02:57:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 02:57:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:57:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 02:57:50 LOG5 begin_task: Level: (4) ID = <10632> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 02:57:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 02:57:50 LOG5 end_task: Level: (4) ID = <10632> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 02:57:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 02:57:50 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 02:57:50 LOG5 finish_task: Level: (3) ID = <10629> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 02:57:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:57:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 02:57:50 LOG5 end_task: Level: (3) ID = <10629> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 02:57:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 02:57:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 02:57:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:57:50 LOG5 begin_task: Level: (3) ID = <10633> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:57:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 02:57:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:57:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:57:50 LOG5 end_task: Level: (3) ID = <10633> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 02:57:50 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 02:57:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:57:50 LOG5 begin_task: Level: (3) ID = <10634> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 02:57:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:57:50 INFO2 take_spectra: Starting WAPP scan: 809200035 2008-Apr-01 02:57:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 02:57:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:57:50 LOG5 begin_task: Level: (4) ID = <10635> Status = 0 0 0 0 ok 2008-Apr-01 02:57:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:57:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25071.00 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.490 > 1.4)! 2008-Apr-01 02:57:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.243 1.393 1.465 1.427 2008-Apr-01 02:57:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.930 0.949 1.041 2008-Apr-01 02:57:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.272 1.365 1.353 1.490 2008-Apr-01 02:57:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 1.036 1.083 0.915 2008-Apr-01 02:57:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 02:57:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 02:57:52 LOG5 end_task: Level: (4) ID = <10635> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 02:57:52 LOG5 end_task: Level: (3) ID = <10634> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 02:57:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 02:57:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 02:57:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 02:57:52 LOG5 begin_task: Level: (3) ID = <10636> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 02:57:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 02:57:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 02:57:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 02:57:52 LOG5 end_task: Level: (3) ID = <10636> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 02:57:52 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 02:57:52 LOG5 finish_task: Level: (2) ID = <10628> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 02:57:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 02:57:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 02:57:52 LOG5 end_task: Level: (2) ID = <10628> Status = 0 0 0 0 ok 2008-Apr-01 02:57:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 48 of 99 2008-Apr-01 02:57:52 LOG4 send_obs_status: To obs_status: <1> LOOP 48 2008-Apr-01 02:57:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 02:57:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 02:57:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 02:57:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 02:57:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 02:57:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 02:57:53 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 02:57:53 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 02:57:53 LOG5 begin_task: Level: (2) ID = <10637> Status = 0 0 0 0 ok 2008-Apr-01 02:57:53 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 02:57:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 02:57:53 INFO2 take_spectra: Starting WAPP scan: 809200036 2008-Apr-01 02:57:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 02:57:53 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 02:57:53 LOG5 begin_task: Level: (3) ID = <10638> Status = 0 0 0 0 ok 2008-Apr-01 02:57:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 02:57:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 02:57:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0017.fits 2008-Apr-01 02:57:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0017.fits} 2008-Apr-01 02:57:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25074.00 2008-Apr-01 02:57:54 INFO5 check_wapp_levels: WAPP power levels are between 1.243 and 1.511 (still bad) 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 02:57:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.900 and 1.115 2008-Apr-01 03:07:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:07:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:07:54 LOG5 end_task: Level: (3) ID = <10638> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:07:54 LOG5 end_task: Level: (2) ID = <10637> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG1 fixed_driftmap: New position: year = 2008.2522395239182 RA = 15:20:31.0 RA/Dec = 15:20:57.4 +03:29:38.8 2008-Apr-01 03:07:54 NOTE fixed_driftmap: Correcting ZA to 14:51:34.9 ... 2008-Apr-01 03:07:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8596870166 -CF 2008-Apr-01 03:07:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 03:07:54 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 03:07:54 LOG5 begin_task: Level: (2) ID = <10639> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 03:07:54 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 03:07:54 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:07:54 LOG5 begin_task: Level: (3) ID = <10640> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:07:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:07:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:07:54 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:07:54 LOG5 begin_task: Level: (4) ID = <10641> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8596870166 -CF 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:07:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:07:54 LOG5 end_task: Level: (4) ID = <10641> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:07:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:07:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:07:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:07:54 LOG5 begin_task: Level: (4) ID = <10642> Status = 0 0 0 0 ok 2008-Apr-01 03:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:07:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:07:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:07:56 LOG5 end_task: Level: (4) ID = <10642> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:07:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:07:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:07:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:07:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:07:56 LOG5 begin_task: Level: (4) ID = <10643> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:07:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:07:56 LOG5 end_task: Level: (4) ID = <10643> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:07:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:07:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:07:56 LOG5 finish_task: Level: (3) ID = <10640> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:07:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:07:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:07:56 LOG5 end_task: Level: (3) ID = <10640> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 03:07:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 03:07:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 03:07:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:07:56 LOG5 begin_task: Level: (3) ID = <10644> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:07:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 03:07:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:07:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:07:56 LOG5 end_task: Level: (3) ID = <10644> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 03:07:56 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 03:07:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:07:56 LOG5 begin_task: Level: (3) ID = <10645> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 03:07:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:07:56 INFO2 take_spectra: Starting WAPP scan: 809200037 2008-Apr-01 03:07:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 03:07:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:07:56 LOG5 begin_task: Level: (4) ID = <10646> Status = 0 0 0 0 ok 2008-Apr-01 03:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:07:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25677.00 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:07:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:07:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:07:58 LOG5 end_task: Level: (4) ID = <10646> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:07:58 LOG5 end_task: Level: (3) ID = <10645> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 03:07:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 03:07:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 03:07:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:07:58 LOG5 begin_task: Level: (3) ID = <10647> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:07:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:07:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:07:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:07:58 LOG5 end_task: Level: (3) ID = <10647> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:07:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 03:07:58 LOG5 finish_task: Level: (2) ID = <10639> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 03:07:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:07:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 03:07:58 LOG5 end_task: Level: (2) ID = <10639> Status = 0 0 0 0 ok 2008-Apr-01 03:07:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 49 of 99 2008-Apr-01 03:07:58 LOG4 send_obs_status: To obs_status: <1> LOOP 49 2008-Apr-01 03:07:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:07:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:07:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:07:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:07:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:07:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:07:59 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:07:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:07:59 LOG5 begin_task: Level: (2) ID = <10648> Status = 0 0 0 0 ok 2008-Apr-01 03:07:59 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:07:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:07:59 INFO2 take_spectra: Starting WAPP scan: 809200038 2008-Apr-01 03:07:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:07:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:07:59 LOG5 begin_task: Level: (3) ID = <10649> Status = 0 0 0 0 ok 2008-Apr-01 03:07:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:07:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.520 > 1.4)! 2008-Apr-01 03:07:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.246 1.393 1.475 1.422 2008-Apr-01 03:07:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.380 1.273 1.319 1.412 2008-Apr-01 03:07:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.363 1.353 1.480 2008-Apr-01 03:07:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.400 1.430 1.520 1.265 2008-Apr-01 03:07:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:07:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0018.fits 2008-Apr-01 03:07:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0018.fits} 2008-Apr-01 03:07:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25680.00 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.911 and 1.480 (still bad) 2008-Apr-01 03:08:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.107 2008-Apr-01 03:17:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.573 < 0.8)! 2008-Apr-01 03:17:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.024 1.102 1.051 2008-Apr-01 03:17:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.631 0.573 0.594 0.623 2008-Apr-01 03:17:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 0.976 0.988 1.110 2008-Apr-01 03:17:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 1.027 1.095 0.907 2008-Apr-01 03:17:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.906 and 1.109 2008-Apr-01 03:18:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:18:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:18:00 LOG5 end_task: Level: (3) ID = <10649> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:18:00 LOG5 end_task: Level: (2) ID = <10648> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 LOG1 fixed_driftmap: New position: year = 2008.2522587268995 RA = 15:30:38.7 RA/Dec = 15:31:05.1 +03:29:44.4 2008-Apr-01 03:18:00 NOTE fixed_driftmap: Correcting ZA to 14:51:29.3 ... 2008-Apr-01 03:18:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8581371082 -CF 2008-Apr-01 03:18:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 03:18:00 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 03:18:00 LOG5 begin_task: Level: (2) ID = <10650> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 03:18:00 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 03:18:00 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:18:00 LOG5 begin_task: Level: (3) ID = <10651> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:18:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:18:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:18:00 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:18:00 LOG5 begin_task: Level: (4) ID = <10652> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8581371082 -CF 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:18:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:18:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:18:00 LOG5 end_task: Level: (4) ID = <10652> Status = 0 0 0 0 ok 2008-Apr-01 03:18:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:18:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:18:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:18:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:18:00 LOG5 begin_task: Level: (4) ID = <10653> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:18:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:18:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:18:01 LOG5 end_task: Level: (4) ID = <10653> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:18:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:18:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:18:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:18:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:18:01 LOG5 begin_task: Level: (4) ID = <10654> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:18:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:18:01 LOG5 end_task: Level: (4) ID = <10654> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:18:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:18:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:18:01 LOG5 finish_task: Level: (3) ID = <10651> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:18:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:18:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:18:01 LOG5 end_task: Level: (3) ID = <10651> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 03:18:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 03:18:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 03:18:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:18:01 LOG5 begin_task: Level: (3) ID = <10655> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:18:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 03:18:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:18:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:18:01 LOG5 end_task: Level: (3) ID = <10655> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 03:18:01 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 03:18:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:18:01 LOG5 begin_task: Level: (3) ID = <10656> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 03:18:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:18:01 INFO2 take_spectra: Starting WAPP scan: 809200039 2008-Apr-01 03:18:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 03:18:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:18:01 LOG5 begin_task: Level: (4) ID = <10657> Status = 0 0 0 0 ok 2008-Apr-01 03:18:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:18:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26282.00 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:18:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:18:03 LOG5 end_task: Level: (4) ID = <10657> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:18:03 LOG5 end_task: Level: (3) ID = <10656> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 03:18:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 03:18:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 03:18:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:18:03 LOG5 begin_task: Level: (3) ID = <10658> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:18:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:18:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:18:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:18:03 LOG5 end_task: Level: (3) ID = <10658> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:18:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 03:18:03 LOG5 finish_task: Level: (2) ID = <10650> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 03:18:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:18:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 03:18:03 LOG5 end_task: Level: (2) ID = <10650> Status = 0 0 0 0 ok 2008-Apr-01 03:18:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 50 of 99 2008-Apr-01 03:18:03 LOG4 send_obs_status: To obs_status: <1> LOOP 50 2008-Apr-01 03:18:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:18:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:18:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:18:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:18:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:18:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:18:04 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:18:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:18:04 LOG5 begin_task: Level: (2) ID = <10659> Status = 0 0 0 0 ok 2008-Apr-01 03:18:04 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:18:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:18:04 INFO2 take_spectra: Starting WAPP scan: 809200040 2008-Apr-01 03:18:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:18:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:18:04 LOG5 begin_task: Level: (3) ID = <10660> Status = 0 0 0 0 ok 2008-Apr-01 03:18:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:18:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:18:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0019.fits 2008-Apr-01 03:18:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0019.fits} 2008-Apr-01 03:18:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26285.00 2008-Apr-01 03:18:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.524 > 1.4)! 2008-Apr-01 03:18:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.255 1.386 1.472 1.411 2008-Apr-01 03:18:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.381 1.261 1.319 1.406 2008-Apr-01 03:18:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.279 1.354 1.358 1.482 2008-Apr-01 03:18:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.405 1.429 1.524 1.261 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:18:06 LOG5 wapp_failed: Calling 'wapp_failed 4' 2008-Apr-01 03:18:06 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2008-Apr-01 03:18:06 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2008-Apr-01 03:18:06 START begin_task: Starting task 'handling WAPP failure' 2008-Apr-01 03:18:06 LOG5 begin_task: Level: (4) ID = <10661> Status = 0 0 0 0 ok 2008-Apr-01 03:18:06 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2008-Apr-01 03:18:06 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2008-Apr-01 03:18:06 LOG1 task_failed: Task 'handling WAPP failure' failed! 2008-Apr-01 03:18:06 LOG5 task_failed: Level: (4) ID = <10661> Status = 0 0 0 0 ok 2008-Apr-01 03:18:06 WARNING abort_task: WARNING abort requested! 2008-Apr-01 03:18:06 WARNING abort_task: WARNING Aborting handling WAPP failure 2008-Apr-01 03:18:06 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2008-Apr-01 03:18:06 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2008-Apr-01 03:18:06 LOG5 end_task: Level: (4) ID = <10661> Status = 1 0 0 1 failed 2008-Apr-01 03:18:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2008-Apr-01 03:18:06 LOG5 end_task: Level: (3) ID = <10660> Status = 1 0 0 1 failed 2008-Apr-01 03:18:06 START begin_task: Starting task 'stopping the WAPPs' 2008-Apr-01 03:18:06 LOG5 begin_task: Level: (3) ID = <10662> Status = 1 0 0 1 failed 2008-Apr-01 03:18:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Apr-01 03:18:06 INFO1 stop_wapp: Stopping the WAPPs 2008-Apr-01 03:18:06 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Apr-01 03:18:06 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Apr-01 03:18:06 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Apr-01 03:18:06 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Apr-01 03:18:06 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Apr-01 03:18:06 LOG5 begin_task: Level: (4) ID = <10663> Status = 1 0 0 1 failed 2008-Apr-01 03:18:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Apr-01 03:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.914 and 1.524 (still bad) 2008-Apr-01 03:18:06 ERROR WAPP=4-read_timeout: ERROR time-out while waiting for data from the correlator! 2008-Apr-01 03:18:07 ERROR WAPP=4-start_spectra: ERROR failed to read spectral line data! 2008-Apr-01 03:18:07 PROBLEM WAPP=4-start_spectra: Reason: Connection timed out! 2008-Apr-01 03:18:07 ERROR WAPP=4-start_spectra: ERROR the correlator has failed to start! 2008-Apr-01 03:18:07 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:18:07 INFO1 WAPP=4-wappcon: Can't abort --- the WAPP isn't running 2008-Apr-01 03:18:08 NOTE WAPP=1+2+3-wappcon: WAPP successfully aborted! 2008-Apr-01 03:18:08 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2008-Apr-01 03:18:08 LOG5 end_task: Level: (4) ID = <10663> Status = 1 0 0 1 failed 2008-Apr-01 03:18:08 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2008-Apr-01 03:18:08 LOG5 end_task: Level: (3) ID = <10662> Status = 1 0 0 1 failed 2008-Apr-01 03:18:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2008-Apr-01 03:18:08 LOG5 end_task: Level: (2) ID = <10659> Status = 1 0 0 1 failed 2008-Apr-01 03:18:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-01 03:18:08 LOG5 finish_task: Level: (1) ID = <10103> Status = 1 0 0 1 failed 2008-Apr-01 03:18:08 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Apr-01 03:18:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Apr-01 03:18:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Apr-01 03:18:08 LOG5 end_task: Level: (1) ID = <10103> Status = 1 0 0 1 failed 2008-Apr-01 03:18:08 LOG4 WAPP=1+2+3-start_spectra: Abort request received 2008-Apr-01 03:18:08 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2008-Apr-01 03:18:09 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 24 dumps! 2008-Apr-01 03:19:24 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Apr-01 03:19:24 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Apr-01 03:19:24 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Apr-01 03:19:24 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Apr-01 03:19:24 LOG5 begin_task: Level: (1) ID = <10664> Status = 0 0 0 0 ok 2008-Apr-01 03:19:24 NOTE restart_wapp: Restarting all WAPPs 2008-Apr-01 03:19:24 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Apr-01 03:19:24 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Apr-01 03:19:24 LOG5 end_task: Level: (1) ID = <10664> Status = 0 0 0 0 ok 2008-Apr-01 03:19:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-01 03:19:24 LOG3 exec_msg: Closing socket 2008-Apr-01 03:19:24 LOG3 exec_msg: Closing socket 2008-Apr-01 03:19:24 LOG3 exec_msg: Closing socket 2008-Apr-01 03:19:25 LOG3 exec_msg: Closing socket 2008-Apr-01 03:19:27 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Apr-01 03:19:27 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Apr-01 03:19:27 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Apr-01 03:19:27 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Apr-01 03:19:44 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-01 03:19:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-01 03:19:46 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Apr-01 03:19:46 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Apr-01 03:19:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-01 03:19:46 LOG5 begin_task: Level: (1) ID = <10665> Status = 0 0 0 0 ok 2008-Apr-01 03:19:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-01 03:19:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-01 03:19:46 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-01 03:19:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:19:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:19:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:19:47 LOG5 begin_task: Level: (2) ID = <10666> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:19:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:19:47 LOG5 end_task: Level: (2) ID = <10666> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:19:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:19:47 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-01 03:19:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-01 03:19:47 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-01 03:19:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-01 03:19:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-01 03:19:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-01 03:19:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-01 03:19:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:19:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-01 03:19:47 LOG5 begin_task: Level: (2) ID = <10667> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-01 03:19:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-01 03:19:47 LOG5 end_task: Level: (2) ID = <10667> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-01 03:19:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-01 03:19:47 LOG5 finish_task: Level: (1) ID = <10665> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-01 03:19:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 03:19:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-01 03:19:47 LOG5 end_task: Level: (1) ID = <10665> Status = 0 0 0 0 ok 2008-Apr-01 03:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-01 03:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-01 03:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-01 03:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-01 03:19:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-01 03:19:48 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Apr-01 03:19:48 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Apr-01 03:19:48 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-01 03:19:48 LOG5 begin_task: Level: (1) ID = <10668> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-01 03:19:48 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-01 03:19:48 START begin_task: Starting task 'selecting calibration port' 2008-Apr-01 03:19:48 LOG5 begin_task: Level: (2) ID = <10669> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-01 03:19:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-01 03:19:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:19:48 START begin_task: Starting task 'waiting on calport' 2008-Apr-01 03:19:48 LOG5 begin_task: Level: (3) ID = <10670> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Apr-01 03:19:48 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-01 03:19:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:19:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:19:48 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-01 03:19:48 LOG5 end_task: Level: (3) ID = <10670> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-01 03:19:48 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-01 03:19:48 LOG5 finish_task: Level: (2) ID = <10669> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-01 03:19:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:19:48 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-01 03:19:48 LOG5 end_task: Level: (2) ID = <10669> Status = 0 0 0 0 ok 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:19:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:19:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-01 03:19:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-01 03:19:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:19:49 LOG5 begin_task: Level: (2) ID = <10671> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-01 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:19:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-01 03:19:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:19:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:19:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:19:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:19:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:19:49 LOG5 end_task: Level: (2) ID = <10671> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-01 03:19:49 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-01 03:19:49 LOG5 finish_task: Level: (1) ID = <10668> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-01 03:19:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 03:19:49 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-01 03:19:49 LOG5 end_task: Level: (1) ID = <10668> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-01 03:19:49 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Apr-01 03:19:49 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Apr-01 03:19:49 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-01 03:19:49 LOG5 begin_task: Level: (1) ID = <10672> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-01 03:19:49 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-01 03:19:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-01 03:19:49 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-01 03:19:49 LOG5 finish_task: Level: (1) ID = <10672> Status = 0 0 0 0 ok 2008-Apr-01 03:19:49 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-01 03:19:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 03:19:49 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-01 03:19:49 LOG5 end_task: Level: (1) ID = <10672> Status = 0 0 0 0 ok 2008-Apr-01 03:19:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-01 03:19:50 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-01 03:19:50 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Apr-01 03:20:40 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Apr-01 03:20:40 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Apr-01 03:20:40 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 03:20:40 LOG5 begin_task: Level: (1) ID = <10673> Status = 0 0 0 0 ok 2008-Apr-01 03:20:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-01 03:20:40 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-01 03:20:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-01 03:20:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-01 03:20:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:20:40 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-01 03:20:40 LOG5 begin_task: Level: (2) ID = <10674> Status = 0 0 0 0 ok 2008-Apr-01 03:20:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-01 03:20:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:20:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:20:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-01 03:20:44 LOG5 end_task: Level: (2) ID = <10674> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-01 03:20:44 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 03:20:44 LOG5 begin_task: Level: (2) ID = <10675> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-01 03:20:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:20:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:20:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:20:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:20:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-01 03:20:44 LOG5 begin_task: Level: (3) ID = <10676> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-01 03:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:20:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Apr-01 03:20:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-01 03:20:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-01 03:20:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-01 03:20:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-01 03:20:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-01 03:20:44 LOG5 end_task: Level: (3) ID = <10676> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.897 1.026 ALFA beam 1: 1.100 1.049 2008-Apr-01 03:20:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.023 0.922 ALFA beam 3: 0.957 1.009 2008-Apr-01 03:20:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.910 0.954 ALFA beam 5: 0.981 1.105 2008-Apr-01 03:20:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.985 1.003 ALFA beam 7: 1.080 0.887 2008-Apr-01 03:20:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 03:20:44 LOG5 finish_task: Level: (2) ID = <10675> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Apr-01 03:20:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:20:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 03:20:44 LOG5 end_task: Level: (2) ID = <10675> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Apr-01 03:20:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 03:20:44 LOG5 finish_task: Level: (1) ID = <10673> Status = 0 0 0 0 ok 2008-Apr-01 03:20:44 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-01 03:20:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 03:20:44 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 03:20:44 LOG5 end_task: Level: (1) ID = <10673> Status = 0 0 0 0 ok 2008-Apr-01 03:20:49 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Apr-01 03:20:49 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Apr-01 03:20:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:20:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:20:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:20:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:20:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:20:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0020.fits 2008-Apr-01 03:20:49 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080401.a2010.0020.fits} 2008-Apr-01 03:20:53 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Apr-01 03:20:53 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift15p1 153400.0 +033142 J 0 Topocentric velocity(optical) 2008-Apr-01 03:20:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift15p1 153400.0 +033142 J 0 Topocentric velocity(optical)' 2008-Apr-01 03:20:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Apr-01 03:20:53 LOG5 begin_task: Level: (1) ID = <10677> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift15p1' 2008-Apr-01 03:20:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Apr-01 03:20:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift15p1} 2008-Apr-01 03:20:53 INFO5 fixed_driftmap: Start: year = 2008.2522641772505 RA = 15:34:26.4 Dec = +03:29:46.3 2008-Apr-01 03:20:53 NOTE fixed_driftmap: Setting ZA to 14:51:27.4 ... 2008-Apr-01 03:20:53 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 14.86 2008-Apr-01 03:20:53 LOG3 track_source: Calling 'track_source drift15p1 360.0 14.8576103894 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-01 03:20:53 START begin_task: Starting task 'sending tracking commands' 2008-Apr-01 03:20:53 LOG5 begin_task: Level: (2) ID = <10678> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift15p1} INFO {Slewing to source 'drift15p1' ...} 2008-Apr-01 03:20:53 INFO1 track_source: Starting to track drift15p1 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift15p1" 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: set dec 14.8576103894 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: pnt tr 360.0 14.8576103894 -CF 2008-Apr-01 03:20:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-01 03:20:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-01 03:20:53 LOG5 finish_task: Level: (2) ID = <10678> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-01 03:20:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:20:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-01 03:20:53 LOG5 end_task: Level: (2) ID = <10678> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-01 03:20:53 LOG5 begin_task: Level: (2) ID = <10679> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-01 03:20:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-01 03:20:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Apr-01 03:20:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-01 03:20:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-01 03:20:53 LOG5 begin_task: Level: (3) ID = <10680> Status = 0 0 0 0 ok 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift15p1" 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: set dec 14.8576103894 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: vw% 14.8576103894 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 14.8576103894 -CF 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-01 03:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:20:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-01 03:20:54 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-01 03:20:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-01 03:20:54 LOG5 end_task: Level: (3) ID = <10680> Status = 0 0 0 0 ok 2008-Apr-01 03:20:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-01 03:20:54 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-01 03:20:54 LOG5 finish_task: Level: (2) ID = <10679> Status = 0 0 0 0 ok 2008-Apr-01 03:20:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-01 03:20:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:20:54 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-01 03:20:54 LOG5 end_task: Level: (2) ID = <10679> Status = 0 0 0 0 ok 2008-Apr-01 03:20:54 START begin_task: Starting task 'waiting on telescope' 2008-Apr-01 03:20:54 LOG5 begin_task: Level: (2) ID = <10681> Status = 0 0 0 0 ok 2008-Apr-01 03:20:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-01 03:20:54 LOG3 waittrk: Start waittrk 5 2008-Apr-01 03:20:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-01 03:20:54 LOG5 begin_task: Level: (3) ID = <10682> Status = 0 0 0 0 ok 2008-Apr-01 03:20:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-01 03:20:59 LOG5 end_task: Level: (3) ID = <10682> Status = 0 0 0 0 ok 2008-Apr-01 03:20:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-01 03:20:59 LOG5 begin_task: Level: (3) ID = <10683> Status = 0 0 0 0 ok 2008-Apr-01 03:21:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-01 03:21:00 LOG5 end_task: Level: (3) ID = <10683> Status = 0 0 0 0 ok 2008-Apr-01 03:21:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-01 03:21:00 INFO2 waittrk: Now tracking drift15p1 2008-Apr-01 03:21:00 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 14.83 2008-Apr-01 03:21:00 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-01 03:21:00 LOG5 finish_task: Level: (2) ID = <10681> Status = 0 0 0 0 ok 2008-Apr-01 03:21:00 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-01 03:21:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:21:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-01 03:21:00 LOG5 end_task: Level: (2) ID = <10681> Status = 0 0 0 0 ok 2008-Apr-01 03:21:01 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:21:01 LOG5 begin_task: Level: (2) ID = <10684> Status = 0 0 0 0 ok 2008-Apr-01 03:21:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:21:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:21:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:21:01 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:21:01 LOG5 begin_task: Level: (3) ID = <10685> Status = 0 0 0 0 ok 2008-Apr-01 03:21:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:21:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:21:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:21:01 LOG5 end_task: Level: (3) ID = <10685> Status = 0 0 0 0 ok 2008-Apr-01 03:21:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:21:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:21:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:21:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:21:01 LOG5 begin_task: Level: (3) ID = <10686> Status = 0 0 0 0 ok 2008-Apr-01 03:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:21:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:21:02 LOG5 end_task: Level: (3) ID = <10686> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:21:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:21:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:21:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:21:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:21:02 LOG5 begin_task: Level: (3) ID = <10687> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:21:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:21:02 LOG5 end_task: Level: (3) ID = <10687> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:21:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:21:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:21:02 LOG5 finish_task: Level: (2) ID = <10684> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:21:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:21:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:21:02 LOG5 end_task: Level: (2) ID = <10684> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG5 dopset_later: Calling 'dopset_later 20.339732544683642' 2008-Apr-01 03:21:02 INFO3 dopset_later: Setting Doppler correction for 03:21:21 (20.3 seconds from now) 2008-Apr-01 03:21:02 LOG2 antvel: Parameters to Doppler: Topocentric 26481 2008 92 0.0 2008-Apr-01 03:21:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 03:21:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Apr-01 03:21:02 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Apr-01 03:21:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 03:21:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 03:21:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 03:21:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 03:21:02 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 03:21:02 LOG5 begin_task: Level: (2) ID = <10688> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-01 03:21:02 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-01 03:21:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-01 03:21:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-01 03:21:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:21:02 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-01 03:21:02 LOG5 begin_task: Level: (3) ID = <10689> Status = 0 0 0 0 ok 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:21:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-01 03:21:05 LOG5 end_task: Level: (3) ID = <10689> Status = 0 0 0 0 ok 2008-Apr-01 03:21:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-01 03:21:05 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 03:21:05 LOG5 begin_task: Level: (3) ID = <10690> Status = 0 0 0 0 ok 2008-Apr-01 03:21:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-01 03:21:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:21:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:21:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:21:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 03:21:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-01 03:21:05 LOG5 begin_task: Level: (4) ID = <10691> Status = 0 0 0 0 ok 2008-Apr-01 03:21:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-01 03:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:21:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Apr-01 03:21:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-01 03:21:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 5 dB 2008-Apr-01 03:21:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-01 03:21:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-01 03:21:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-01 03:21:06 LOG5 end_task: Level: (4) ID = <10691> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.909 1.022 ALFA beam 1: 1.103 1.054 2008-Apr-01 03:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.921 ALFA beam 3: 0.957 1.030 2008-Apr-01 03:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.920 0.976 ALFA beam 5: 0.978 1.107 2008-Apr-01 03:21:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.006 1.025 ALFA beam 7: 1.093 0.908 2008-Apr-01 03:21:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 03:21:06 LOG5 finish_task: Level: (3) ID = <10690> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-01 03:21:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:21:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 03:21:06 LOG5 end_task: Level: (3) ID = <10690> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:21:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 03:21:06 LOG5 finish_task: Level: (2) ID = <10688> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-01 03:21:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:21:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 03:21:06 LOG5 end_task: Level: (2) ID = <10688> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:21:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:21:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:21:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:21:06 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080401.a2010.0020.fits' is empty! 2008-Apr-01 03:21:06 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 15:34:26.4 LST = 15:34:10.0 diff = 16.4 secs 2008-Apr-01 03:21:06 INFO2 fixed_driftmap: Waiting 14.4 seconds for RA 15:34:26 2008-Apr-01 03:21:06 INFO2 lstwait: Waiting for 14.3 secs from LST 15:34:10 to LST 15:34:24 ... 2008-Apr-01 03:21:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.345743340845509 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Apr-01 03:21:06 START begin_task: Starting task 'waiting on wait on LST' 2008-Apr-01 03:21:06 LOG5 begin_task: Level: (2) ID = <10692> Status = 0 0 0 0 ok 2008-Apr-01 03:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:21:20 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Apr-01 03:21:20 LOG5 end_task: Level: (2) ID = <10692> Status = 0 0 0 0 ok 2008-Apr-01 03:21:21 LOG4 lstwait: Finished waiting, the gui caused difference: 0.65577979999886793 2008-Apr-01 03:21:21 INFO3 lstwait: Finished waiting 2008-Apr-01 03:21:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-01 03:21:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Apr-01 03:21:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-01 03:21:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:21:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:21:21 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:21:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:21:21 LOG5 begin_task: Level: (2) ID = <10693> Status = 0 0 0 0 ok 2008-Apr-01 03:21:21 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:21:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:21:21 INFO2 take_spectra: Starting WAPP scan: 809200041 2008-Apr-01 03:21:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:21:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:21:21 LOG5 begin_task: Level: (3) ID = <10694> Status = 0 0 0 0 ok 2008-Apr-01 03:21:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:21:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26482.00 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:31:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:31:22 LOG5 end_task: Level: (3) ID = <10694> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:31:22 LOG5 end_task: Level: (2) ID = <10693> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 LOG1 fixed_driftmap: New position: year = 2008.2522841407458 RA = 15:44:02.9 RA/Dec = 15:44:29.3 +03:29:52.1 2008-Apr-01 03:31:22 NOTE fixed_driftmap: Correcting ZA to 14:51:21.6 ... 2008-Apr-01 03:31:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8559950222 -CF 2008-Apr-01 03:31:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 03:31:22 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 03:31:22 LOG5 begin_task: Level: (2) ID = <10695> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 03:31:22 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 03:31:22 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:31:22 LOG5 begin_task: Level: (3) ID = <10696> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:31:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:31:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:31:22 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:31:22 LOG5 begin_task: Level: (4) ID = <10697> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8559950222 -CF 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:31:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:31:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:31:22 LOG5 end_task: Level: (4) ID = <10697> Status = 0 0 0 0 ok 2008-Apr-01 03:31:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:31:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:31:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:31:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:31:22 LOG5 begin_task: Level: (4) ID = <10698> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:31:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:31:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:31:23 LOG5 end_task: Level: (4) ID = <10698> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:31:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:31:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:31:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:31:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:31:23 LOG5 begin_task: Level: (4) ID = <10699> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:31:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:31:23 LOG5 end_task: Level: (4) ID = <10699> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:31:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:31:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:31:23 LOG5 finish_task: Level: (3) ID = <10696> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:31:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:31:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:31:23 LOG5 end_task: Level: (3) ID = <10696> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 03:31:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 03:31:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 03:31:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:31:23 LOG5 begin_task: Level: (3) ID = <10700> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:31:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 03:31:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:31:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:31:23 LOG5 end_task: Level: (3) ID = <10700> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 03:31:23 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 03:31:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:31:23 LOG5 begin_task: Level: (3) ID = <10701> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 03:31:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:31:23 INFO2 take_spectra: Starting WAPP scan: 809200042 2008-Apr-01 03:31:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 03:31:23 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:31:23 LOG5 begin_task: Level: (4) ID = <10702> Status = 0 0 0 0 ok 2008-Apr-01 03:31:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:31:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27084.00 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:31:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:31:25 LOG5 end_task: Level: (4) ID = <10702> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:31:25 LOG5 end_task: Level: (3) ID = <10701> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 03:31:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 03:31:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 03:31:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:31:25 LOG5 begin_task: Level: (3) ID = <10703> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:31:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:31:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.516 > 1.4)! 2008-Apr-01 03:31:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.241 1.385 1.465 1.418 2008-Apr-01 03:31:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.367 1.269 1.318 1.417 2008-Apr-01 03:31:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.271 1.358 1.351 1.480 2008-Apr-01 03:31:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.395 1.436 1.516 1.268 2008-Apr-01 03:31:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:31:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:31:25 LOG5 end_task: Level: (3) ID = <10703> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:31:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 03:31:25 LOG5 finish_task: Level: (2) ID = <10695> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 03:31:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:31:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 03:31:25 LOG5 end_task: Level: (2) ID = <10695> Status = 0 0 0 0 ok 2008-Apr-01 03:31:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Apr-01 03:31:25 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-01 03:31:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:31:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:31:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:31:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:31:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:31:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:31:26 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:31:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:31:26 LOG5 begin_task: Level: (2) ID = <10704> Status = 0 0 0 0 ok 2008-Apr-01 03:31:26 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:31:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:31:26 INFO2 take_spectra: Starting WAPP scan: 809200043 2008-Apr-01 03:31:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:31:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:31:26 LOG5 begin_task: Level: (3) ID = <10705> Status = 0 0 0 0 ok 2008-Apr-01 03:31:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:31:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:31:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0021.fits 2008-Apr-01 03:31:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0021.fits} 2008-Apr-01 03:31:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27087.00 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:31:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.107 2008-Apr-01 03:41:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:41:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:41:27 LOG5 end_task: Level: (3) ID = <10705> Status = 0 0 0 0 ok 2008-Apr-01 03:41:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:41:27 LOG5 end_task: Level: (2) ID = <10704> Status = 0 0 0 0 ok 2008-Apr-01 03:41:27 LOG1 fixed_driftmap: New position: year = 2008.252303312039 RA = 15:54:09.7 RA/Dec = 15:54:35.9 +03:29:58.2 2008-Apr-01 03:41:27 NOTE fixed_driftmap: Correcting ZA to 14:51:15.5 ... 2008-Apr-01 03:41:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8543146471 -CF 2008-Apr-01 03:41:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 03:41:27 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 03:41:27 LOG5 begin_task: Level: (2) ID = <10706> Status = 0 0 0 0 ok 2008-Apr-01 03:41:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 03:41:27 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 03:41:27 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:41:27 LOG5 begin_task: Level: (3) ID = <10707> Status = 0 0 0 0 ok 2008-Apr-01 03:41:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:41:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:41:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:41:27 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:41:27 LOG5 begin_task: Level: (4) ID = <10708> Status = 0 0 0 0 ok 2008-Apr-01 03:41:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8543146471 -CF 2008-Apr-01 03:41:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:41:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:41:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:41:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:41:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:41:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:41:28 LOG5 end_task: Level: (4) ID = <10708> Status = 0 0 0 0 ok 2008-Apr-01 03:41:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:41:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:41:28 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:41:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:41:28 LOG5 begin_task: Level: (4) ID = <10709> Status = 0 0 0 0 ok 2008-Apr-01 03:41:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:41:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:41:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:41:28 LOG5 end_task: Level: (4) ID = <10709> Status = 0 0 0 0 ok 2008-Apr-01 03:41:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:41:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:41:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:41:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:41:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:41:28 LOG5 begin_task: Level: (4) ID = <10710> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:41:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:41:29 LOG5 end_task: Level: (4) ID = <10710> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:41:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:41:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:41:29 LOG5 finish_task: Level: (3) ID = <10707> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:41:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:41:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:41:29 LOG5 end_task: Level: (3) ID = <10707> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 03:41:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 03:41:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 03:41:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:41:29 LOG5 begin_task: Level: (3) ID = <10711> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:41:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 03:41:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:41:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:41:29 LOG5 end_task: Level: (3) ID = <10711> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 03:41:29 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 03:41:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:41:29 LOG5 begin_task: Level: (3) ID = <10712> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 03:41:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:41:29 INFO2 take_spectra: Starting WAPP scan: 809200044 2008-Apr-01 03:41:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 03:41:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:41:29 LOG5 begin_task: Level: (4) ID = <10713> Status = 0 0 0 0 ok 2008-Apr-01 03:41:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:41:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27690.00 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:41:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:41:31 LOG5 end_task: Level: (4) ID = <10713> Status = 0 0 0 0 ok 2008-Apr-01 03:41:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:41:31 LOG5 end_task: Level: (3) ID = <10712> Status = 0 0 0 0 ok 2008-Apr-01 03:41:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 03:41:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 03:41:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 03:41:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:41:31 LOG5 begin_task: Level: (3) ID = <10714> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:41:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:41:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:41:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:41:32 LOG5 end_task: Level: (3) ID = <10714> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:41:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 03:41:32 LOG5 finish_task: Level: (2) ID = <10706> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:41:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 03:41:32 LOG5 end_task: Level: (2) ID = <10706> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Apr-01 03:41:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:41:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:41:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:41:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:41:32 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:41:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:41:32 LOG5 begin_task: Level: (2) ID = <10715> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:41:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:41:32 INFO2 take_spectra: Starting WAPP scan: 809200045 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:41:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:41:32 LOG5 begin_task: Level: (3) ID = <10716> Status = 0 0 0 0 ok 2008-Apr-01 03:41:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:41:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.520 > 1.4)! 2008-Apr-01 03:41:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.397 1.464 1.428 2008-Apr-01 03:41:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.364 1.269 1.313 1.414 2008-Apr-01 03:41:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.277 1.364 1.349 1.483 2008-Apr-01 03:41:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.401 1.448 1.520 1.279 2008-Apr-01 03:41:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:41:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0022.fits 2008-Apr-01 03:41:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27693.00 2008-Apr-01 03:41:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0022.fits} 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:41:34 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.110 2008-Apr-01 03:51:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:51:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:51:33 LOG5 end_task: Level: (3) ID = <10716> Status = 0 0 0 0 ok 2008-Apr-01 03:51:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:51:33 LOG5 end_task: Level: (2) ID = <10715> Status = 0 0 0 0 ok 2008-Apr-01 03:51:33 LOG1 fixed_driftmap: New position: year = 2008.2523225150203 RA = 16:04:17.4 RA/Dec = 16:04:43.6 +03:30:04.4 2008-Apr-01 03:51:33 NOTE fixed_driftmap: Correcting ZA to 14:51:09.3 ... 2008-Apr-01 03:51:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8525795316 -CF 2008-Apr-01 03:51:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 03:51:33 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 03:51:33 LOG5 begin_task: Level: (2) ID = <10717> Status = 0 0 0 0 ok 2008-Apr-01 03:51:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 03:51:33 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 03:51:33 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 03:51:33 LOG5 begin_task: Level: (3) ID = <10718> Status = 0 0 0 0 ok 2008-Apr-01 03:51:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 03:51:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 03:51:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:51:33 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 03:51:33 LOG5 begin_task: Level: (4) ID = <10719> Status = 0 0 0 0 ok 2008-Apr-01 03:51:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8525795316 -CF 2008-Apr-01 03:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:51:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 03:51:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 03:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:51:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 03:51:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 03:51:34 LOG5 end_task: Level: (4) ID = <10719> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 03:51:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:51:34 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 03:51:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:51:34 LOG5 begin_task: Level: (4) ID = <10720> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 03:51:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:51:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:51:34 LOG5 end_task: Level: (4) ID = <10720> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:51:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 03:51:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 03:51:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:51:34 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 03:51:34 LOG5 begin_task: Level: (4) ID = <10721> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 03:51:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 03:51:34 LOG5 end_task: Level: (4) ID = <10721> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 03:51:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 03:51:34 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 03:51:34 LOG5 finish_task: Level: (3) ID = <10718> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 03:51:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:51:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 03:51:34 LOG5 end_task: Level: (3) ID = <10718> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 03:51:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 03:51:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 03:51:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:51:34 LOG5 begin_task: Level: (3) ID = <10722> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:51:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 03:51:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:51:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:51:34 LOG5 end_task: Level: (3) ID = <10722> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 03:51:34 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 03:51:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:51:34 LOG5 begin_task: Level: (3) ID = <10723> Status = 0 0 0 0 ok 2008-Apr-01 03:51:34 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 03:51:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:51:34 INFO2 take_spectra: Starting WAPP scan: 809200046 2008-Apr-01 03:51:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 03:51:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:51:35 LOG5 begin_task: Level: (4) ID = <10724> Status = 0 0 0 0 ok 2008-Apr-01 03:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:51:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28296.00 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 03:51:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 03:51:37 LOG5 end_task: Level: (4) ID = <10724> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 03:51:37 LOG5 end_task: Level: (3) ID = <10723> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 03:51:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 03:51:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 03:51:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 03:51:37 LOG5 begin_task: Level: (3) ID = <10725> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 03:51:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 03:51:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 03:51:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 03:51:37 LOG5 end_task: Level: (3) ID = <10725> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 03:51:37 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 03:51:37 LOG5 finish_task: Level: (2) ID = <10717> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 03:51:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 03:51:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 03:51:37 LOG5 end_task: Level: (2) ID = <10717> Status = 0 0 0 0 ok 2008-Apr-01 03:51:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Apr-01 03:51:37 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Apr-01 03:51:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 03:51:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 03:51:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 03:51:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 03:51:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 03:51:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 03:51:38 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 03:51:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 03:51:38 LOG5 begin_task: Level: (2) ID = <10726> Status = 0 0 0 0 ok 2008-Apr-01 03:51:38 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 03:51:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 03:51:38 INFO2 take_spectra: Starting WAPP scan: 809200047 2008-Apr-01 03:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 03:51:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 03:51:38 LOG5 begin_task: Level: (3) ID = <10727> Status = 0 0 0 0 ok 2008-Apr-01 03:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 03:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 03:51:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.515 > 1.4)! 2008-Apr-01 03:51:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.392 1.467 1.425 2008-Apr-01 03:51:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.372 1.270 1.315 1.414 2008-Apr-01 03:51:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.275 1.364 1.346 1.484 2008-Apr-01 03:51:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.397 1.438 1.515 1.270 2008-Apr-01 03:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28299.00 2008-Apr-01 03:51:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0023.fits 2008-Apr-01 03:51:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0023.fits} 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 03:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.901 and 1.515 (still bad) 2008-Apr-01 03:51:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.902 and 1.115 2008-Apr-01 04:01:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:01:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:01:39 LOG5 end_task: Level: (3) ID = <10727> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:01:39 LOG5 end_task: Level: (2) ID = <10726> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG1 fixed_driftmap: New position: year = 2008.2523417180014 RA = 16:14:25.1 RA/Dec = 16:14:51.2 +03:30:10.8 2008-Apr-01 04:01:39 NOTE fixed_driftmap: Correcting ZA to 14:51:02.9 ... 2008-Apr-01 04:01:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8507958207 -CF 2008-Apr-01 04:01:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 04:01:39 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 04:01:39 LOG5 begin_task: Level: (2) ID = <10728> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 04:01:39 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 04:01:39 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 04:01:39 LOG5 begin_task: Level: (3) ID = <10729> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 04:01:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 04:01:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:01:39 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 04:01:39 LOG5 begin_task: Level: (4) ID = <10730> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8507958207 -CF 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:01:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 04:01:39 LOG5 end_task: Level: (4) ID = <10730> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 04:01:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:01:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 04:01:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:01:39 LOG5 begin_task: Level: (4) ID = <10731> Status = 0 0 0 0 ok 2008-Apr-01 04:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:01:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:01:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:01:40 LOG5 end_task: Level: (4) ID = <10731> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:01:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 04:01:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:01:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:01:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:01:40 LOG5 begin_task: Level: (4) ID = <10732> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:01:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:01:40 LOG5 end_task: Level: (4) ID = <10732> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:01:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:01:40 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 04:01:40 LOG5 finish_task: Level: (3) ID = <10729> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 04:01:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:01:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 04:01:40 LOG5 end_task: Level: (3) ID = <10729> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:01:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:01:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:01:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:01:40 LOG5 begin_task: Level: (3) ID = <10733> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:01:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:01:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:01:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:01:40 LOG5 end_task: Level: (3) ID = <10733> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 04:01:40 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 04:01:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:01:40 LOG5 begin_task: Level: (3) ID = <10734> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 04:01:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:01:40 INFO2 take_spectra: Starting WAPP scan: 809200048 2008-Apr-01 04:01:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 04:01:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:01:40 LOG5 begin_task: Level: (4) ID = <10735> Status = 0 0 0 0 ok 2008-Apr-01 04:01:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:01:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28901.00 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:01:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:01:42 LOG5 end_task: Level: (4) ID = <10735> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:01:42 LOG5 end_task: Level: (3) ID = <10734> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:01:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:01:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:01:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:01:42 LOG5 begin_task: Level: (3) ID = <10736> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:01:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:01:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:01:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:01:42 LOG5 end_task: Level: (3) ID = <10736> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 04:01:42 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 04:01:42 LOG5 finish_task: Level: (2) ID = <10728> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 04:01:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:01:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 04:01:42 LOG5 end_task: Level: (2) ID = <10728> Status = 0 0 0 0 ok 2008-Apr-01 04:01:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Apr-01 04:01:42 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Apr-01 04:01:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:01:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:01:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:01:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:01:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 04:01:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 04:01:43 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 04:01:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:01:43 LOG5 begin_task: Level: (2) ID = <10737> Status = 0 0 0 0 ok 2008-Apr-01 04:01:43 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 04:01:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:01:43 INFO2 take_spectra: Starting WAPP scan: 809200049 2008-Apr-01 04:01:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 04:01:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:01:43 LOG5 begin_task: Level: (3) ID = <10738> Status = 0 0 0 0 ok 2008-Apr-01 04:01:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:01:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.512 > 1.4)! 2008-Apr-01 04:01:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.242 1.385 1.457 1.418 2008-Apr-01 04:01:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.369 1.266 1.309 1.411 2008-Apr-01 04:01:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.267 1.356 1.341 1.483 2008-Apr-01 04:01:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.394 1.432 1.512 1.265 2008-Apr-01 04:01:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:01:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0024.fits 2008-Apr-01 04:01:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0024.fits} 2008-Apr-01 04:01:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28904.00 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 1.242 and 1.512 (still bad) 2008-Apr-01 04:01:47 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.111 2008-Apr-01 04:11:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:11:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:11:44 LOG5 end_task: Level: (3) ID = <10738> Status = 0 0 0 0 ok 2008-Apr-01 04:11:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:11:44 LOG5 end_task: Level: (2) ID = <10737> Status = 0 0 0 0 ok 2008-Apr-01 04:11:44 LOG1 fixed_driftmap: New position: year = 2008.2523608892946 RA = 16:24:31.8 RA/Dec = 16:24:57.9 +03:30:17.4 2008-Apr-01 04:11:44 NOTE fixed_driftmap: Correcting ZA to 14:50:56.3 ... 2008-Apr-01 04:11:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8489700338 -CF 2008-Apr-01 04:11:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 04:11:44 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 04:11:44 LOG5 begin_task: Level: (2) ID = <10739> Status = 0 0 0 0 ok 2008-Apr-01 04:11:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 04:11:44 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 04:11:44 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 04:11:44 LOG5 begin_task: Level: (3) ID = <10740> Status = 0 0 0 0 ok 2008-Apr-01 04:11:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 04:11:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 04:11:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:11:44 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 04:11:44 LOG5 begin_task: Level: (4) ID = <10741> Status = 0 0 0 0 ok 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8489700338 -CF 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:11:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:11:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 04:11:44 LOG5 end_task: Level: (4) ID = <10741> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 04:11:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:11:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 04:11:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:11:45 LOG5 begin_task: Level: (4) ID = <10742> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:11:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:11:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:11:45 LOG5 end_task: Level: (4) ID = <10742> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:11:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 04:11:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:11:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:11:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:11:45 LOG5 begin_task: Level: (4) ID = <10743> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:11:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:11:45 LOG5 end_task: Level: (4) ID = <10743> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:11:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:11:45 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 04:11:45 LOG5 finish_task: Level: (3) ID = <10740> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 04:11:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:11:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 04:11:45 LOG5 end_task: Level: (3) ID = <10740> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:11:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:11:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:11:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:11:45 LOG5 begin_task: Level: (3) ID = <10744> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:11:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:11:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:11:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:11:45 LOG5 end_task: Level: (3) ID = <10744> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 04:11:45 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 04:11:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:11:45 LOG5 begin_task: Level: (3) ID = <10745> Status = 0 0 0 0 ok 2008-Apr-01 04:11:45 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 04:11:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:11:45 INFO2 take_spectra: Starting WAPP scan: 809200050 2008-Apr-01 04:11:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 04:11:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:11:46 LOG5 begin_task: Level: (4) ID = <10746> Status = 0 0 0 0 ok 2008-Apr-01 04:11:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:11:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29507.00 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.492 > 1.4)! 2008-Apr-01 04:11:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.241 1.396 1.465 1.428 2008-Apr-01 04:11:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.930 0.954 1.044 2008-Apr-01 04:11:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.273 1.368 1.347 1.492 2008-Apr-01 04:11:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 1.042 1.088 0.921 2008-Apr-01 04:11:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:11:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:11:48 LOG5 end_task: Level: (4) ID = <10746> Status = 0 0 0 0 ok 2008-Apr-01 04:11:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:11:48 LOG5 end_task: Level: (3) ID = <10745> Status = 0 0 0 0 ok 2008-Apr-01 04:11:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:11:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:11:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:11:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:11:48 LOG5 begin_task: Level: (3) ID = <10747> Status = 0 0 0 0 ok 2008-Apr-01 04:11:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:11:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:11:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:11:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:11:48 LOG5 end_task: Level: (3) ID = <10747> Status = 0 0 0 0 ok 2008-Apr-01 04:11:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 04:11:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 04:11:48 LOG5 finish_task: Level: (2) ID = <10739> Status = 0 0 0 0 ok 2008-Apr-01 04:11:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 04:11:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:11:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 04:11:49 LOG5 end_task: Level: (2) ID = <10739> Status = 0 0 0 0 ok 2008-Apr-01 04:11:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Apr-01 04:11:49 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Apr-01 04:11:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:11:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:11:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:11:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:11:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 04:11:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 04:11:49 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 04:11:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:11:49 LOG5 begin_task: Level: (2) ID = <10748> Status = 0 0 0 0 ok 2008-Apr-01 04:11:49 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 04:11:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:11:49 INFO2 take_spectra: Starting WAPP scan: 809200051 2008-Apr-01 04:11:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 04:11:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:11:49 LOG5 begin_task: Level: (3) ID = <10749> Status = 0 0 0 0 ok 2008-Apr-01 04:11:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:11:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:11:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29510.00 2008-Apr-01 04:11:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0025.fits 2008-Apr-01 04:11:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0025.fits} 2008-Apr-01 04:11:50 INFO5 check_wapp_levels: WAPP power levels are between 1.241 and 1.517 (still bad) 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:11:52 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.905 and 1.116 2008-Apr-01 04:21:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:21:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:21:50 LOG5 end_task: Level: (3) ID = <10749> Status = 0 0 0 0 ok 2008-Apr-01 04:21:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:21:50 LOG5 end_task: Level: (2) ID = <10748> Status = 0 0 0 0 ok 2008-Apr-01 04:21:50 LOG1 fixed_driftmap: New position: year = 2008.2523800922756 RA = 16:34:39.5 RA/Dec = 16:35:05.5 +03:30:24.1 2008-Apr-01 04:21:50 NOTE fixed_driftmap: Correcting ZA to 14:50:49.6 ... 2008-Apr-01 04:21:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8470997126 -CF 2008-Apr-01 04:21:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 04:21:50 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 04:21:50 LOG5 begin_task: Level: (2) ID = <10750> Status = 0 0 0 0 ok 2008-Apr-01 04:21:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 04:21:50 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 04:21:50 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 04:21:50 LOG5 begin_task: Level: (3) ID = <10751> Status = 0 0 0 0 ok 2008-Apr-01 04:21:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 04:21:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 04:21:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:21:50 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 04:21:50 LOG5 begin_task: Level: (4) ID = <10752> Status = 0 0 0 0 ok 2008-Apr-01 04:21:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8470997126 -CF 2008-Apr-01 04:21:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:21:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 04:21:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:21:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:21:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:21:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 04:21:51 LOG5 end_task: Level: (4) ID = <10752> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 04:21:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:21:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 04:21:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:21:51 LOG5 begin_task: Level: (4) ID = <10753> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:21:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:21:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:21:51 LOG5 end_task: Level: (4) ID = <10753> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:21:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 04:21:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:21:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:21:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:21:51 LOG5 begin_task: Level: (4) ID = <10754> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:21:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:21:51 LOG5 end_task: Level: (4) ID = <10754> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:21:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:21:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 04:21:51 LOG5 finish_task: Level: (3) ID = <10751> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 04:21:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:21:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 04:21:51 LOG5 end_task: Level: (3) ID = <10751> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:21:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:21:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:21:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:21:51 LOG5 begin_task: Level: (3) ID = <10755> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:21:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:21:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:21:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:21:51 LOG5 end_task: Level: (3) ID = <10755> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 04:21:51 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 04:21:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:21:51 LOG5 begin_task: Level: (3) ID = <10756> Status = 0 0 0 0 ok 2008-Apr-01 04:21:51 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 04:21:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:21:51 INFO2 take_spectra: Starting WAPP scan: 809200052 2008-Apr-01 04:21:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 04:21:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:21:52 LOG5 begin_task: Level: (4) ID = <10757> Status = 0 0 0 0 ok 2008-Apr-01 04:21:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:21:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30113.00 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:21:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:21:54 LOG5 end_task: Level: (4) ID = <10757> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:21:54 LOG5 end_task: Level: (3) ID = <10756> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:21:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:21:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:21:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:21:54 LOG5 begin_task: Level: (3) ID = <10758> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:21:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:21:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:21:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:21:54 LOG5 end_task: Level: (3) ID = <10758> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 04:21:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 04:21:54 LOG5 finish_task: Level: (2) ID = <10750> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 04:21:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:21:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 04:21:54 LOG5 end_task: Level: (2) ID = <10750> Status = 0 0 0 0 ok 2008-Apr-01 04:21:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Apr-01 04:21:54 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Apr-01 04:21:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:21:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:21:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:21:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:21:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 04:21:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 04:21:55 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 04:21:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:21:55 LOG5 begin_task: Level: (2) ID = <10759> Status = 0 0 0 0 ok 2008-Apr-01 04:21:55 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 04:21:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:21:55 INFO2 take_spectra: Starting WAPP scan: 809200053 2008-Apr-01 04:21:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 04:21:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:21:55 LOG5 begin_task: Level: (3) ID = <10760> Status = 0 0 0 0 ok 2008-Apr-01 04:21:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:21:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:21:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0026.fits 2008-Apr-01 04:21:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0026.fits} 2008-Apr-01 04:21:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30116.00 2008-Apr-01 04:21:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.522 > 1.4)! 2008-Apr-01 04:21:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.246 1.402 1.475 1.432 2008-Apr-01 04:21:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.379 1.281 1.327 1.429 2008-Apr-01 04:21:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.280 1.374 1.358 1.498 2008-Apr-01 04:21:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.404 1.449 1.522 1.280 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:21:58 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.910 and 1.122 2008-Apr-01 04:31:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:31:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:31:56 LOG5 end_task: Level: (3) ID = <10760> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:31:56 LOG5 end_task: Level: (2) ID = <10759> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG1 fixed_driftmap: New position: year = 2008.252399295257 RA = 16:44:47.2 RA/Dec = 16:45:13.2 +03:30:31.0 2008-Apr-01 04:31:56 NOTE fixed_driftmap: Correcting ZA to 14:50:42.7 ... 2008-Apr-01 04:31:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.8451914728 -CF 2008-Apr-01 04:31:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Apr-01 04:31:56 START begin_task: Starting task 'WAPP calibration' 2008-Apr-01 04:31:56 LOG5 begin_task: Level: (2) ID = <10761> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Apr-01 04:31:56 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Apr-01 04:31:56 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 04:31:56 LOG5 begin_task: Level: (3) ID = <10762> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 04:31:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 04:31:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:31:56 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 04:31:56 LOG5 begin_task: Level: (4) ID = <10763> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.8451914728 -CF 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:31:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 04:31:56 LOG5 end_task: Level: (4) ID = <10763> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 04:31:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:31:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 04:31:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:31:56 LOG5 begin_task: Level: (4) ID = <10764> Status = 0 0 0 0 ok 2008-Apr-01 04:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:31:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:31:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:31:57 LOG5 end_task: Level: (4) ID = <10764> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:31:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 04:31:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:31:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:31:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:31:57 LOG5 begin_task: Level: (4) ID = <10765> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:31:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:31:57 LOG5 end_task: Level: (4) ID = <10765> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:31:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:31:57 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 04:31:57 LOG5 finish_task: Level: (3) ID = <10762> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 INFO3 finish_task: DONE finished configuring: calibration type 2008-Apr-01 04:31:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:31:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 04:31:57 LOG5 end_task: Level: (3) ID = <10762> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:31:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:31:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:31:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:31:57 LOG5 begin_task: Level: (3) ID = <10766> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:31:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:31:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:31:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:31:57 LOG5 end_task: Level: (3) ID = <10766> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Apr-01 04:31:57 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Apr-01 04:31:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:31:57 LOG5 begin_task: Level: (3) ID = <10767> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 INFO3 take_spectra: Starting take_spectra 1 1 2008-Apr-01 04:31:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:31:57 INFO2 take_spectra: Starting WAPP scan: 809200054 2008-Apr-01 04:31:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Apr-01 04:31:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:31:57 LOG5 begin_task: Level: (4) ID = <10768> Status = 0 0 0 0 ok 2008-Apr-01 04:31:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:31:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30718.00 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:31:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.477 > 1.4)! 2008-Apr-01 04:31:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.256 1.406 1.477 1.440 2008-Apr-01 04:31:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.945 0.964 1.057 2008-Apr-01 04:31:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.998 0.988 1.126 2008-Apr-01 04:31:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 1.052 1.100 0.930 2008-Apr-01 04:31:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:31:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Apr-01 04:31:59 LOG5 end_task: Level: (4) ID = <10768> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Apr-01 04:31:59 LOG5 end_task: Level: (3) ID = <10767> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:31:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:31:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:31:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:31:59 LOG5 begin_task: Level: (3) ID = <10769> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:31:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:31:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:31:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:31:59 LOG5 end_task: Level: (3) ID = <10769> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 04:31:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Apr-01 04:31:59 LOG5 finish_task: Level: (2) ID = <10761> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Apr-01 04:31:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:31:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Apr-01 04:31:59 LOG5 end_task: Level: (2) ID = <10761> Status = 0 0 0 0 ok 2008-Apr-01 04:31:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Apr-01 04:31:59 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Apr-01 04:31:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:31:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:31:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:32:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:32:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Apr-01 04:32:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Apr-01 04:32:00 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Apr-01 04:32:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Apr-01 04:32:00 LOG5 begin_task: Level: (2) ID = <10770> Status = 0 0 0 0 ok 2008-Apr-01 04:32:00 INFO3 take_spectra: Starting take_spectra 600 1 2008-Apr-01 04:32:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Apr-01 04:32:00 INFO2 take_spectra: Starting WAPP scan: 809200055 2008-Apr-01 04:32:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Apr-01 04:32:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Apr-01 04:32:00 LOG5 begin_task: Level: (3) ID = <10771> Status = 0 0 0 0 ok 2008-Apr-01 04:32:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:32:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:32:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0027.fits 2008-Apr-01 04:32:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0027.fits} 2008-Apr-01 04:32:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30721.00 2008-Apr-01 04:32:01 INFO5 check_wapp_levels: WAPP power levels are between 1.256 and 1.528 (still bad) 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:32:03 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.917 and 1.127 2008-Apr-01 04:32:13 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Apr-01 04:32:13 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Apr-01 04:32:13 WARNING abort_task: WARNING abort requested! 2008-Apr-01 04:32:13 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Apr-01 04:32:13 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Apr-01 04:32:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Apr-01 04:32:13 LOG5 end_task: Level: (3) ID = <10771> Status = 1 0 0 0 abort 2008-Apr-01 04:32:13 START begin_task: Starting task 'stopping the WAPPs' 2008-Apr-01 04:32:13 LOG5 begin_task: Level: (3) ID = <10772> Status = 1 0 0 0 abort 2008-Apr-01 04:32:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Apr-01 04:32:13 INFO1 stop_wapp: Stopping the WAPPs 2008-Apr-01 04:32:13 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Apr-01 04:32:13 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Apr-01 04:32:13 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Apr-01 04:32:13 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Apr-01 04:32:13 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Apr-01 04:32:13 LOG5 begin_task: Level: (4) ID = <10773> Status = 1 0 0 0 abort 2008-Apr-01 04:32:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Apr-01 04:32:14 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Apr-01 04:32:15 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Apr-01 04:32:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:32:15 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Apr-01 04:32:15 LOG5 end_task: Level: (4) ID = <10773> Status = 1 0 0 0 abort 2008-Apr-01 04:32:15 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Apr-01 04:32:15 LOG5 end_task: Level: (3) ID = <10772> Status = 1 0 0 0 abort 2008-Apr-01 04:32:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Apr-01 04:32:15 LOG5 end_task: Level: (2) ID = <10770> Status = 1 0 0 0 abort 2008-Apr-01 04:32:15 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Apr-01 04:32:15 LOG5 finish_task: Level: (1) ID = <10677> Status = 1 0 0 0 abort 2008-Apr-01 04:32:15 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Apr-01 04:32:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Apr-01 04:32:15 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Apr-01 04:32:15 LOG5 end_task: Level: (1) ID = <10677> Status = 1 0 0 0 abort 2008-Apr-01 04:33:12 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Apr-01 04:33:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Apr-01 04:33:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Apr-01 04:33:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Apr-01 04:33:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Apr-01 04:33:12 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Apr-01 04:33:12 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Apr-01 04:33:12 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Apr-01 04:33:12 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Apr-01 04:33:12 LOG5 begin_task: Level: (1) ID = <10774> Status = 0 0 0 0 ok 2008-Apr-01 04:33:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Apr-01 04:33:12 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Apr-01 04:33:12 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Apr-01 04:33:12 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-01 04:33:13 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Apr-01 04:33:13 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Apr-01 04:33:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Apr-01 04:33:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Apr-01 04:33:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-01 04:33:15 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Apr-01 04:33:15 LOG5 begin_task: Level: (2) ID = <10775> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Apr-01 04:33:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Apr-01 04:33:15 LOG1 config_iflo: Receiver ALFA already selected 2008-Apr-01 04:33:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:33:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:33:15 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:33:15 LOG5 begin_task: Level: (3) ID = <10776> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:33:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:33:15 LOG5 end_task: Level: (3) ID = <10776> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:33:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:33:15 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Apr-01 04:33:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Apr-01 04:33:15 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Apr-01 04:33:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Apr-01 04:33:15 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Apr-01 04:33:15 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Apr-01 04:33:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Apr-01 04:33:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:15 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Apr-01 04:33:15 LOG5 begin_task: Level: (3) ID = <10777> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:15 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Apr-01 04:33:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Apr-01 04:33:15 LOG5 end_task: Level: (3) ID = <10777> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Apr-01 04:33:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Apr-01 04:33:15 LOG5 finish_task: Level: (2) ID = <10775> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 DONE finish_task: DONE finished configuration: IF/LO path 2008-Apr-01 04:33:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:33:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Apr-01 04:33:15 LOG5 end_task: Level: (2) ID = <10775> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Apr-01 04:33:15 LOG5 begin_task: Level: (2) ID = <10778> Status = 0 0 0 0 ok 2008-Apr-01 04:33:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Apr-01 04:33:16 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Apr-01 04:33:16 START begin_task: Starting task 'selecting calibration port' 2008-Apr-01 04:33:16 LOG5 begin_task: Level: (3) ID = <10779> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG3 vw_send: To DATATAKING: calport 3 2008-Apr-01 04:33:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Apr-01 04:33:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:16 START begin_task: Starting task 'waiting on calport' 2008-Apr-01 04:33:16 LOG5 begin_task: Level: (4) ID = <10780> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:33:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Apr-01 04:33:16 LOG5 end_task: Level: (4) ID = <10780> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Apr-01 04:33:16 STOP finish_task: Finishing task 'selecting calibration port' 2008-Apr-01 04:33:16 LOG5 finish_task: Level: (3) ID = <10779> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 INFO2 finish_task: DONE finished configuring: calibration port 2008-Apr-01 04:33:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Apr-01 04:33:16 LOG5 end_task: Level: (3) ID = <10779> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:33:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:33:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Apr-01 04:33:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Apr-01 04:33:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:33:16 LOG5 begin_task: Level: (3) ID = <10781> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Apr-01 04:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Apr-01 04:33:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:33:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:33:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:33:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:33:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:33:16 LOG5 end_task: Level: (3) ID = <10781> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Apr-01 04:33:16 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Apr-01 04:33:16 LOG5 finish_task: Level: (2) ID = <10778> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Apr-01 04:33:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:33:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Apr-01 04:33:16 LOG5 end_task: Level: (2) ID = <10778> Status = 0 0 0 0 ok 2008-Apr-01 04:33:16 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Apr-01 04:33:17 BEGIN begin_task: Starting task 'tracking current position' 2008-Apr-01 04:33:17 LOG5 begin_task: Level: (2) ID = <10782> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Apr-01 04:33:17 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 16:46:07.5 and Dec = +03:31:41.5 2008-Apr-01 04:33:17 LOG3 track_source: Calling 'track_source Cur-pos 164607.5 033141.5 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Apr-01 04:33:17 START begin_task: Starting task 'sending tracking commands' 2008-Apr-01 04:33:17 LOG5 begin_task: Level: (3) ID = <10783> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Apr-01 04:33:17 INFO1 track_source: Starting to track Cur-pos 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: set ra 164607.5 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: set dec 033141.5 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: pnt tr 164607.5 033141.5 -CJ 2008-Apr-01 04:33:17 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Apr-01 04:33:17 STOP finish_task: Finishing task 'sending tracking commands' 2008-Apr-01 04:33:17 LOG5 finish_task: Level: (3) ID = <10783> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 INFO2 finish_task: DONE finished sending: tracking commands 2008-Apr-01 04:33:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Apr-01 04:33:17 LOG5 end_task: Level: (3) ID = <10783> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 START begin_task: Starting task 'waiting on telescope' 2008-Apr-01 04:33:17 LOG5 begin_task: Level: (3) ID = <10784> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Apr-01 04:33:17 LOG3 waittrk: Start waittrk 5 2008-Apr-01 04:33:17 START begin_task: Starting task 'waiting on telescope movement' 2008-Apr-01 04:33:17 LOG5 begin_task: Level: (4) ID = <10785> Status = 0 0 0 0 ok 2008-Apr-01 04:33:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: set ra 164607.5 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: set dec 033141.5 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: vw% 164607.5 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: vw% 033141.5 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: pnt tr 164607.5 033141.5 -CJ 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Apr-01 04:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Apr-01 04:33:22 LOG5 end_task: Level: (4) ID = <10785> Status = 0 0 0 0 ok 2008-Apr-01 04:33:22 START begin_task: Starting task 'waiting on telescope on source' 2008-Apr-01 04:33:22 LOG5 begin_task: Level: (4) ID = <10786> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Apr-01 04:33:28 LOG5 end_task: Level: (4) ID = <10786> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Apr-01 04:33:28 INFO2 waittrk: Now tracking Cur-pos 2008-Apr-01 04:33:28 LOG4 waittrk: Current telescope position: Az = 359.84 ZA = 14.82 2008-Apr-01 04:33:28 STOP finish_task: Finishing task 'waiting on telescope' 2008-Apr-01 04:33:28 LOG5 finish_task: Level: (3) ID = <10784> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Apr-01 04:33:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Apr-01 04:33:28 LOG5 end_task: Level: (3) ID = <10784> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 STOP finish_task: Finishing task 'tracking current position' 2008-Apr-01 04:33:28 LOG5 finish_task: Level: (2) ID = <10782> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 DONE finish_task: DONE finished tracking: current position 2008-Apr-01 04:33:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:33:28 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Apr-01 04:33:28 LOG5 end_task: Level: (2) ID = <10782> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Apr-01 04:33:28 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Apr-01 04:33:28 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Apr-01 04:33:28 LOG5 begin_task: Level: (2) ID = <10787> Status = 0 0 0 0 ok 2008-Apr-01 04:33:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Apr-01 04:33:28 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Apr-01 04:33:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Apr-01 04:33:29 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Apr-01 04:33:29 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Apr-01 04:33:29 LOG5 begin_task: Level: (3) ID = <10788> Status = 0 0 0 0 ok 2008-Apr-01 04:33:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Apr-01 04:33:29 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Apr-01 04:33:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Apr-01 04:33:29 LOG5 end_task: Level: (3) ID = <10788> Status = 0 0 0 0 ok 2008-Apr-01 04:33:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Apr-01 04:33:29 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Apr-01 04:33:29 LOG5 finish_task: Level: (2) ID = <10787> Status = 0 0 0 0 ok 2008-Apr-01 04:33:29 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Apr-01 04:33:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:33:29 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Apr-01 04:33:29 LOG5 end_task: Level: (2) ID = <10787> Status = 0 0 0 0 ok 2008-Apr-01 04:33:29 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-01 04:33:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Apr-01 04:33:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Apr-01 04:33:30 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Apr-01 04:33:30 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (2) ID = <10789> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Apr-01 04:33:30 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Apr-01 04:33:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Apr-01 04:33:30 START begin_task: Starting task 'selecting calibration type' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (3) ID = <10790> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Apr-01 04:33:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Apr-01 04:33:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:30 START begin_task: Starting task 'waiting on setcal' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (4) ID = <10791> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Apr-01 04:33:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:33:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Apr-01 04:33:30 LOG5 end_task: Level: (4) ID = <10791> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Apr-01 04:33:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:33:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Apr-01 04:33:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (4) ID = <10792> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:33:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:33:30 LOG5 end_task: Level: (4) ID = <10792> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:33:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Apr-01 04:33:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Apr-01 04:33:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:33:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (4) ID = <10793> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Apr-01 04:33:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Apr-01 04:33:30 LOG5 end_task: Level: (4) ID = <10793> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Apr-01 04:33:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Apr-01 04:33:30 STOP finish_task: Finishing task 'selecting calibration type' 2008-Apr-01 04:33:30 LOG5 finish_task: Level: (3) ID = <10790> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 INFO2 finish_task: DONE finished configuring: calibration type 2008-Apr-01 04:33:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Apr-01 04:33:30 LOG5 end_task: Level: (3) ID = <10790> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kornreich 2008-Apr-01 04:33:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kornreich 2008-Apr-01 04:33:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kornreich 2008-Apr-01 04:33:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kornreich 2008-Apr-01 04:33:30 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Apr-01 04:33:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Apr-01 04:33:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:33:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:33:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:33:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:33:30 LOG5 begin_task: Level: (3) ID = <10794> Status = 0 0 0 0 ok 2008-Apr-01 04:33:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kornreich' 2008-Apr-01 04:33:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:33:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:33:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:33:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:33:31 LOG5 end_task: Level: (3) ID = <10794> Status = 0 0 0 0 ok 2008-Apr-01 04:33:31 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-01 04:33:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 04:33:31 LOG5 begin_task: Level: (3) ID = <10795> Status = 0 0 0 0 ok 2008-Apr-01 04:33:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Apr-01 04:33:31 INFO2 adjust_power: Starting to adjust WAPP power 2008-Apr-01 04:33:31 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Apr-01 04:33:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Apr-01 04:33:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:31 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Apr-01 04:33:31 LOG5 begin_task: Level: (4) ID = <10796> Status = 0 0 0 0 ok 2008-Apr-01 04:33:31 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Apr-01 04:33:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Apr-01 04:33:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20080401.a2010.0028.fits 2008-Apr-01 04:33:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080401.a2010.0028.fits} 2008-Apr-01 04:33:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Apr-01 04:33:34 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Apr-01 04:33:34 LOG5 end_task: Level: (4) ID = <10796> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Apr-01 04:33:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Apr-01 04:33:34 LOG5 begin_task: Level: (4) ID = <10797> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Apr-01 04:33:34 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 04:33:34 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 04:33:34 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 04:33:34 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Apr-01 04:33:34 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Apr-01 04:33:34 LOG5 begin_task: Level: (5) ID = <10798> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Apr-01 04:33:34 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2008-Apr-01 04:33:34 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Apr-01 04:33:34 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2008-Apr-01 04:33:34 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 6 6 dB 2008-Apr-01 04:33:34 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Apr-01 04:33:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Apr-01 04:33:34 LOG5 end_task: Level: (5) ID = <10798> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 1.045 ALFA beam 1: 1.105 1.074 2008-Apr-01 04:33:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.026 0.941 ALFA beam 3: 0.965 1.054 2008-Apr-01 04:33:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.929 0.995 ALFA beam 5: 0.988 0.882 2008-Apr-01 04:33:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.013 1.050 ALFA beam 7: 1.100 0.929 2008-Apr-01 04:33:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 04:33:34 LOG5 finish_task: Level: (4) ID = <10797> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Apr-01 04:33:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 04:33:34 LOG5 end_task: Level: (4) ID = <10797> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Apr-01 04:33:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Apr-01 04:33:34 LOG5 finish_task: Level: (3) ID = <10795> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Apr-01 04:33:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Apr-01 04:33:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Apr-01 04:33:34 LOG5 end_task: Level: (3) ID = <10795> Status = 0 0 0 0 ok 2008-Apr-01 04:33:34 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-01 04:33:35 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-01 04:33:35 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-01 04:33:35 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:33:35 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:33:35 LOG2 antvel: Parameters to Doppler: Topocentric 30814 2008 92 0.0 2008-Apr-01 04:33:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:33:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-01 04:33:35 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-01 04:33:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:33:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:33:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:33:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:33:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:33:35 LOG5 begin_task: Level: (3) ID = <10799> Status = 0 0 0 0 ok 2008-Apr-01 04:33:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:33:35 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.780803 2008.2524024006896 18.999933 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 0 16.768749999999844 3.528194444444448 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 1 16.767633480610382 3.633011020924101 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 2 16.763003985803259 3.563662210818725 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 3 16.764094491671077 3.458771107380515 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 4 16.769882342933162 3.423396206787336 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 5 16.774522177368855 3.493208390433243 2008-Apr-01 04:33:35 LOG4 log_alfabeam: ALFABEAM 6 16.773363844658277 3.597929745413001 2008-Apr-01 04:33:35 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200056 2008-Apr-01 04:33:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:33:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:33:35 LOG5 begin_task: Level: (4) ID = <10800> Status = 0 0 0 0 ok 2008-Apr-01 04:33:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:33:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:33:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30816.00 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:33:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:33:46 LOG5 end_task: Level: (4) ID = <10800> Status = 0 0 0 0 ok 2008-Apr-01 04:33:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:33:46 LOG5 end_task: Level: (3) ID = <10799> Status = 0 0 0 0 ok 2008-Apr-01 04:33:46 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-01 04:33:46 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-01 04:33:46 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-01 04:33:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:33:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:33:46 LOG2 antvel: Parameters to Doppler: Topocentric 30826 2008 92 0.0 2008-Apr-01 04:33:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:33:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-01 04:33:46 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-01 04:33:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:33:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:33:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:33:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:33:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:33:46 LOG5 begin_task: Level: (3) ID = <10801> Status = 0 0 0 0 ok 2008-Apr-01 04:33:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:33:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.784145 2008.2524027809466 18.999933 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000203 3.528194444444440 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 1 16.767656187161794 3.633064665442005 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 2 16.763011695757026 3.563940929238442 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 3 16.764079483375699 3.458997446043487 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 4 16.769859644951065 3.423341793559115 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 5 16.774514569825627 3.492928388099845 2008-Apr-01 04:33:46 LOG4 log_alfabeam: ALFABEAM 6 16.773378922844877 3.597705419943465 2008-Apr-01 04:33:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200057 2008-Apr-01 04:33:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:33:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:33:47 LOG5 begin_task: Level: (4) ID = <10802> Status = 0 0 0 0 ok 2008-Apr-01 04:33:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:33:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:33:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30828.00 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:33:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:33:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:33:58 LOG5 end_task: Level: (4) ID = <10802> Status = 0 0 0 0 ok 2008-Apr-01 04:33:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:33:58 LOG5 end_task: Level: (3) ID = <10801> Status = 0 0 0 0 ok 2008-Apr-01 04:33:58 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-01 04:33:58 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-01 04:33:58 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-01 04:33:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:33:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:33:58 LOG2 antvel: Parameters to Doppler: Topocentric 30838 2008 92 0.0 2008-Apr-01 04:33:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:33:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-01 04:33:58 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-01 04:33:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:33:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:33:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:33:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:33:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:33:58 LOG5 begin_task: Level: (3) ID = <10803> Status = 0 0 0 0 ok 2008-Apr-01 04:33:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:33:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.787488 2008.2524031612036 18.999933 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000274 3.528194444444444 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 1 16.767678910628170 3.633117220015108 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 2 16.763019467769027 3.564219336588430 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 3 16.764064520784068 3.459224565242171 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 4 16.769836929712199 3.423288469500120 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 5 16.774506899668754 3.492648686017123 2008-Apr-01 04:33:58 LOG4 log_alfabeam: ALFABEAM 6 16.773393956239591 3.597480307299116 2008-Apr-01 04:33:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200058 2008-Apr-01 04:33:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:33:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:33:59 LOG5 begin_task: Level: (4) ID = <10804> Status = 0 0 0 0 ok 2008-Apr-01 04:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:33:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:33:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:33:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:33:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30840.00 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:34:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:34:10 LOG5 end_task: Level: (4) ID = <10804> Status = 0 0 0 0 ok 2008-Apr-01 04:34:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:34:10 LOG5 end_task: Level: (3) ID = <10803> Status = 0 0 0 0 ok 2008-Apr-01 04:34:10 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-01 04:34:10 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-01 04:34:10 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-01 04:34:10 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:34:10 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:34:10 LOG2 antvel: Parameters to Doppler: Topocentric 30850 2008 92 0.0 2008-Apr-01 04:34:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:34:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-01 04:34:10 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-01 04:34:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:34:10 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:34:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:34:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:34:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:34:10 LOG5 begin_task: Level: (3) ID = <10805> Status = 0 0 0 0 ok 2008-Apr-01 04:34:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:34:10 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.790830 2008.2524035414608 18.999933 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000104 3.528194444444445 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 1 16.767701636666800 3.633168651716048 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 2 16.763027296920587 3.564497257272972 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 3 16.764049613327590 3.459452321465266 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 4 16.769814211555023 3.423236268049910 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 5 16.774499171756229 3.492369460644379 2008-Apr-01 04:34:10 LOG4 log_alfabeam: ALFABEAM 6 16.773408935364039 3.597254549657509 2008-Apr-01 04:34:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200059 2008-Apr-01 04:34:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:34:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:34:11 LOG5 begin_task: Level: (4) ID = <10806> Status = 0 0 0 0 ok 2008-Apr-01 04:34:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:34:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:34:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30852.00 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:34:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:34:22 LOG5 end_task: Level: (4) ID = <10806> Status = 0 0 0 0 ok 2008-Apr-01 04:34:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:34:22 LOG5 end_task: Level: (3) ID = <10805> Status = 0 0 0 0 ok 2008-Apr-01 04:34:22 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-01 04:34:22 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-01 04:34:22 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-01 04:34:22 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:34:22 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:34:22 LOG2 antvel: Parameters to Doppler: Topocentric 30862 2008 92 0.0 2008-Apr-01 04:34:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:34:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-01 04:34:22 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-01 04:34:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:34:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:34:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:34:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:34:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:34:22 LOG5 begin_task: Level: (3) ID = <10807> Status = 0 0 0 0 ok 2008-Apr-01 04:34:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:34:22 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.794173 2008.2524039217178 18.999933 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000100 3.528194444444441 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 1 16.767724378129312 3.633218989948181 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 2 16.763035187622069 3.564774848616565 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 3 16.764034752560068 3.459680843306724 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 4 16.769791477632442 3.423185159396253 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 5 16.774491381730808 3.492090553966626 2008-Apr-01 04:34:22 LOG4 log_alfabeam: ALFABEAM 6 16.773423868702416 3.597028019488274 2008-Apr-01 04:34:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200060 2008-Apr-01 04:34:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:34:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:34:23 LOG5 begin_task: Level: (4) ID = <10808> Status = 0 0 0 0 ok 2008-Apr-01 04:34:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:34:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:34:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30864.00 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:34:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:34:34 LOG5 end_task: Level: (4) ID = <10808> Status = 0 0 0 0 ok 2008-Apr-01 04:34:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:34:34 LOG5 end_task: Level: (3) ID = <10807> Status = 0 0 0 0 ok 2008-Apr-01 04:34:34 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-01 04:34:34 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-01 04:34:34 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-01 04:34:34 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:34:34 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:34:34 LOG2 antvel: Parameters to Doppler: Topocentric 30874 2008 92 0.0 2008-Apr-01 04:34:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:34:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-01 04:34:34 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-01 04:34:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:34:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:34:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:34:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:34:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:34:34 LOG5 begin_task: Level: (3) ID = <10809> Status = 0 0 0 0 ok 2008-Apr-01 04:34:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:34:34 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.797515 2008.2524043019748 18.999933 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000150 3.528194444444441 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 1 16.767747120660673 3.633268203331805 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 2 16.763043134872017 3.565051935598043 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 3 16.764019947840879 3.459909986280485 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 4 16.769768742293923 3.423135175431660 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 5 16.774483534527267 3.491812141883602 2008-Apr-01 04:34:34 LOG4 log_alfabeam: ALFABEAM 6 16.773438746846292 3.596800859954662 2008-Apr-01 04:34:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200061 2008-Apr-01 04:34:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:34:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:34:35 LOG5 begin_task: Level: (4) ID = <10810> Status = 0 0 0 0 ok 2008-Apr-01 04:34:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:34:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:34:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30876.00 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:34:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:34:46 LOG5 end_task: Level: (4) ID = <10810> Status = 0 0 0 0 ok 2008-Apr-01 04:34:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:34:46 LOG5 end_task: Level: (3) ID = <10809> Status = 0 0 0 0 ok 2008-Apr-01 04:34:46 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-01 04:34:46 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-01 04:34:46 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-01 04:34:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25240 J 2008-Apr-01 04:34:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:34:46 LOG2 antvel: Parameters to Doppler: Topocentric 30886 2008 92 0.0 2008-Apr-01 04:34:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:34:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-01 04:34:46 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-01 04:34:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:34:46 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:34:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:34:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:34:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:34:46 LOG5 begin_task: Level: (3) ID = <10811> Status = 0 0 0 0 ok 2008-Apr-01 04:34:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:34:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.800858 2008.2524046822318 18.999933 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000047 3.528194444444441 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 1 16.767769877120987 3.633316320164936 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 2 16.763051143139858 3.565328675132293 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 3 16.764005190774274 3.460139879677404 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 4 16.769745992683980 3.423086287448951 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 5 16.774475625729391 3.491534066780379 2008-Apr-01 04:34:46 LOG4 log_alfabeam: ALFABEAM 6 16.773453578230498 3.596572942822492 2008-Apr-01 04:34:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200062 2008-Apr-01 04:34:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:34:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:34:47 LOG5 begin_task: Level: (4) ID = <10812> Status = 0 0 0 0 ok 2008-Apr-01 04:34:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:34:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:34:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30888.00 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:34:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:34:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:34:58 LOG5 end_task: Level: (4) ID = <10812> Status = 0 0 0 0 ok 2008-Apr-01 04:34:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:34:58 LOG5 end_task: Level: (3) ID = <10811> Status = 0 0 0 0 ok 2008-Apr-01 04:34:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:34:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:34:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:34:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:34:58 LOG5 begin_task: Level: (3) ID = <10813> Status = 0 0 0 0 ok 2008-Apr-01 04:34:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:34:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:34:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:34:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:34:58 LOG5 end_task: Level: (3) ID = <10813> Status = 0 0 0 0 ok 2008-Apr-01 04:34:58 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-01 04:34:58 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-01 04:34:58 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-01 04:34:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:34:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:34:58 LOG2 antvel: Parameters to Doppler: Topocentric 30898 2008 92 0.0 2008-Apr-01 04:34:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:34:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-01 04:34:58 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-01 04:34:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:34:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:34:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:34:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:34:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:34:58 LOG5 begin_task: Level: (3) ID = <10814> Status = 0 0 0 0 ok 2008-Apr-01 04:34:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:34:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.804200 2008.2524050624891 18.999933 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000093 3.528194444444444 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 1 16.767792633145365 3.633363310619101 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 2 16.763059207342476 3.565604892799862 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 3 16.763990490647625 3.460370378060497 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 4 16.769723243162680 3.423038525789778 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 5 16.774467660354766 3.491256503969626 2008-Apr-01 04:34:58 LOG4 log_alfabeam: ALFABEAM 6 16.773468353517696 3.596344412217289 2008-Apr-01 04:34:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200063 2008-Apr-01 04:34:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:34:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:34:59 LOG5 begin_task: Level: (4) ID = <10815> Status = 0 0 0 0 ok 2008-Apr-01 04:34:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:34:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:34:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:34:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:34:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30900.00 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.539 > 1.4)! 2008-Apr-01 04:35:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.285 1.428 1.525 1.453 2008-Apr-01 04:35:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.396 1.314 1.375 1.454 2008-Apr-01 04:35:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.316 1.392 1.442 1.209 2008-Apr-01 04:35:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.416 1.456 1.539 1.286 2008-Apr-01 04:35:04 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.538 (still bad) 2008-Apr-01 04:35:06 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.540 (still bad) 2008-Apr-01 04:35:08 INFO5 check_wapp_levels: WAPP power levels are between 1.209 and 1.540 (still bad) 2008-Apr-01 04:35:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:35:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:35:10 LOG5 end_task: Level: (4) ID = <10815> Status = 0 0 0 0 ok 2008-Apr-01 04:35:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:35:10 LOG5 end_task: Level: (3) ID = <10814> Status = 0 0 0 0 ok 2008-Apr-01 04:35:10 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-01 04:35:10 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-01 04:35:10 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-01 04:35:10 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:35:10 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:35:10 LOG2 antvel: Parameters to Doppler: Topocentric 30910 2008 92 0.0 2008-Apr-01 04:35:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:35:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-01 04:35:10 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-01 04:35:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:35:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:35:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:35:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:35:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:35:10 LOG5 begin_task: Level: (3) ID = <10816> Status = 0 0 0 0 ok 2008-Apr-01 04:35:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:35:10 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.807542 2008.2524054427461 18.999933 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000029 3.528194444444445 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 1 16.767815394789874 3.633409188323610 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 2 16.763067329568688 3.565880662641840 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 3 16.763975843491437 3.460601542135815 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 4 16.769700487675980 3.422991876646137 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 5 16.774459636337522 3.490979379107597 2008-Apr-01 04:35:10 LOG4 log_alfabeam: ALFABEAM 6 16.773483076694081 3.596115207897280 2008-Apr-01 04:35:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200064 2008-Apr-01 04:35:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:35:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:35:11 LOG5 begin_task: Level: (4) ID = <10817> Status = 0 0 0 0 ok 2008-Apr-01 04:35:11 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.540 (still bad) 2008-Apr-01 04:35:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:35:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:35:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30912.00 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:13 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.540 (still bad) 2008-Apr-01 04:35:15 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.548 (still bad) 2008-Apr-01 04:35:17 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.547 (still bad) 2008-Apr-01 04:35:19 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.546 (still bad) 2008-Apr-01 04:35:21 INFO5 check_wapp_levels: WAPP power levels are between 1.196 and 1.549 (still bad) 2008-Apr-01 04:35:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:35:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:35:22 LOG5 end_task: Level: (4) ID = <10817> Status = 0 0 0 0 ok 2008-Apr-01 04:35:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:35:22 LOG5 end_task: Level: (3) ID = <10816> Status = 0 0 0 0 ok 2008-Apr-01 04:35:22 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-01 04:35:22 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-01 04:35:22 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-01 04:35:22 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:35:22 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:35:22 LOG2 antvel: Parameters to Doppler: Topocentric 30922 2008 92 0.0 2008-Apr-01 04:35:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:35:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-01 04:35:22 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-01 04:35:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:35:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:35:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:35:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:35:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:35:22 LOG5 begin_task: Level: (3) ID = <10818> Status = 0 0 0 0 ok 2008-Apr-01 04:35:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:35:22 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.810885 2008.2524058230031 18.999933 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000047 3.528194444444445 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 1 16.767838168116896 3.633453965687135 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 2 16.763075511971639 3.566156058212971 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 3 16.763961245394384 3.460833433344434 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 4 16.769677720163155 3.422946327430368 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 5 16.774451551547958 3.490702618326415 2008-Apr-01 04:35:22 LOG4 log_alfabeam: ALFABEAM 6 16.773497751688414 3.595885268877351 2008-Apr-01 04:35:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200065 2008-Apr-01 04:35:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:35:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:35:23 LOG5 begin_task: Level: (4) ID = <10819> Status = 0 0 0 0 ok 2008-Apr-01 04:35:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:35:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:35:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:23 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.547 (still bad) 2008-Apr-01 04:35:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30924.00 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:25 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.547 (still bad) 2008-Apr-01 04:35:27 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.546 (still bad) 2008-Apr-01 04:35:29 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.546 (still bad) 2008-Apr-01 04:35:31 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.546 (still bad) 2008-Apr-01 04:35:33 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.546 (still bad) 2008-Apr-01 04:35:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:35:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:35:34 LOG5 end_task: Level: (4) ID = <10819> Status = 0 0 0 0 ok 2008-Apr-01 04:35:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:35:34 LOG5 end_task: Level: (3) ID = <10818> Status = 0 0 0 0 ok 2008-Apr-01 04:35:34 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-01 04:35:34 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-01 04:35:34 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-01 04:35:34 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:35:34 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:35:34 LOG2 antvel: Parameters to Doppler: Topocentric 30934 2008 92 0.0 2008-Apr-01 04:35:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:35:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-01 04:35:34 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-01 04:35:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:35:34 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:35:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:35:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:35:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:35:34 LOG5 begin_task: Level: (3) ID = <10820> Status = 0 0 0 0 ok 2008-Apr-01 04:35:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:35:34 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.814227 2008.2524062032601 18.999933 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000036 3.528194444444444 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 1 16.767860938750974 3.633497615213126 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 2 16.763083749346844 3.566430906046521 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 3 16.763946705531783 3.461065904868791 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 4 16.769654954995502 3.422901906152637 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 5 16.774443411125585 3.490426396007356 2008-Apr-01 04:35:34 LOG4 log_alfabeam: ALFABEAM 6 16.773512369273629 3.595654740681358 2008-Apr-01 04:35:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200066 2008-Apr-01 04:35:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:35:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:35:35 LOG5 begin_task: Level: (4) ID = <10821> Status = 0 0 0 0 ok 2008-Apr-01 04:35:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:35:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:35:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30936.00 2008-Apr-01 04:35:36 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.546 (still bad) 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:38 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.539 (still bad) 2008-Apr-01 04:35:40 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.539 (still bad) 2008-Apr-01 04:35:42 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.539 (still bad) 2008-Apr-01 04:35:44 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.539 (still bad) 2008-Apr-01 04:35:46 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.537 (still bad) 2008-Apr-01 04:35:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:35:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:35:46 LOG5 end_task: Level: (4) ID = <10821> Status = 0 0 0 0 ok 2008-Apr-01 04:35:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:35:46 LOG5 end_task: Level: (3) ID = <10820> Status = 0 0 0 0 ok 2008-Apr-01 04:35:46 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-01 04:35:46 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-01 04:35:46 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-01 04:35:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:35:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:35:46 LOG2 antvel: Parameters to Doppler: Topocentric 30946 2008 92 0.0 2008-Apr-01 04:35:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:35:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-01 04:35:46 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-01 04:35:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:35:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:35:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:35:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:35:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:35:46 LOG5 begin_task: Level: (3) ID = <10822> Status = 0 0 0 0 ok 2008-Apr-01 04:35:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:35:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.817570 2008.2524065835171 18.999933 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000054 3.528194444444445 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 1 16.767883719568580 3.633540162426665 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 2 16.763092046309499 3.566705361965324 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 3 16.763932215638789 3.461299087682687 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 4 16.769632179300249 3.422858586877900 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 5 16.774435210507406 3.490150555604128 2008-Apr-01 04:35:46 LOG4 log_alfabeam: ALFABEAM 6 16.773526937755474 3.595423493373979 2008-Apr-01 04:35:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200067 2008-Apr-01 04:35:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:35:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:35:47 LOG5 begin_task: Level: (4) ID = <10823> Status = 0 0 0 0 ok 2008-Apr-01 04:35:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30948.00 2008-Apr-01 04:35:48 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.539 (still bad) 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:35:50 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.527 (still bad) 2008-Apr-01 04:35:52 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.525 (still bad) 2008-Apr-01 04:35:54 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.524 (still bad) 2008-Apr-01 04:35:56 INFO5 check_wapp_levels: WAPP power levels are between 1.170 and 1.524 (still bad) 2008-Apr-01 04:35:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:35:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:35:58 LOG5 end_task: Level: (4) ID = <10823> Status = 0 0 0 0 ok 2008-Apr-01 04:35:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:35:58 LOG5 end_task: Level: (3) ID = <10822> Status = 0 0 0 0 ok 2008-Apr-01 04:35:58 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-01 04:35:58 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-01 04:35:58 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-01 04:35:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:35:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:35:58 LOG2 antvel: Parameters to Doppler: Topocentric 30958 2008 92 0.0 2008-Apr-01 04:35:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:35:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-01 04:35:58 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-01 04:35:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:35:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:35:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:35:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:35:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:35:58 LOG5 begin_task: Level: (3) ID = <10824> Status = 0 0 0 0 ok 2008-Apr-01 04:35:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:35:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.820912 2008.2524069637743 18.999933 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000033 3.528194444444442 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 1 16.767906496190122 3.633581581388116 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 2 16.763100397575815 3.566979253170908 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 3 16.763917784814435 3.461532834079224 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 4 16.769609407453654 3.422816396059551 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 5 16.774426954913409 3.489875270843686 2008-Apr-01 04:35:58 LOG4 log_alfabeam: ALFABEAM 6 16.773541447981753 3.595191673380863 2008-Apr-01 04:35:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200068 2008-Apr-01 04:35:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:35:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:35:59 LOG5 begin_task: Level: (4) ID = <10825> Status = 0 0 0 0 ok 2008-Apr-01 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.525 (still bad) 2008-Apr-01 04:35:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:35:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:35:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:35:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30960.00 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.523 (still bad) 2008-Apr-01 04:36:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.525 > 1.4)! 2008-Apr-01 04:36:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.248 1.396 1.462 1.427 2008-Apr-01 04:36:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.274 1.313 1.422 2008-Apr-01 04:36:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.268 1.367 1.345 1.167 2008-Apr-01 04:36:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.401 1.446 1.525 1.279 2008-Apr-01 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 1.166 and 1.522 (still bad) 2008-Apr-01 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.523 (still bad) 2008-Apr-01 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 1.169 and 1.523 (still bad) 2008-Apr-01 04:36:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:36:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:36:10 LOG5 end_task: Level: (4) ID = <10825> Status = 0 0 0 0 ok 2008-Apr-01 04:36:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:36:10 LOG5 end_task: Level: (3) ID = <10824> Status = 0 0 0 0 ok 2008-Apr-01 04:36:10 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-01 04:36:10 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-01 04:36:10 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-01 04:36:10 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:36:10 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:36:10 LOG2 antvel: Parameters to Doppler: Topocentric 30970 2008 92 0.0 2008-Apr-01 04:36:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:36:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-01 04:36:10 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-01 04:36:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:36:10 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:36:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:36:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:36:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:36:10 LOG5 begin_task: Level: (3) ID = <10826> Status = 0 0 0 0 ok 2008-Apr-01 04:36:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:36:10 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.824255 2008.2524073440313 18.999933 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000040 3.528194444444445 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 1 16.767929281495800 3.633621896510330 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 2 16.763108807818167 3.567252735022345 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 3 16.763903404847678 3.461767275681316 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 4 16.769586626578253 3.422775308874570 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 5 16.774418639722690 3.489600385634350 2008-Apr-01 04:36:10 LOG4 log_alfabeam: ALFABEAM 6 16.773555908205136 3.594959150109863 2008-Apr-01 04:36:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200069 2008-Apr-01 04:36:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:36:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:36:11 LOG5 begin_task: Level: (4) ID = <10827> Status = 0 0 0 0 ok 2008-Apr-01 04:36:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:36:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:36:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:11 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.522 (still bad) 2008-Apr-01 04:36:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30972.00 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:13 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.520 (still bad) 2008-Apr-01 04:36:15 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.521 (still bad) 2008-Apr-01 04:36:17 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.520 (still bad) 2008-Apr-01 04:36:19 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.522 (still bad) 2008-Apr-01 04:36:21 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.520 (still bad) 2008-Apr-01 04:36:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:36:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:36:22 LOG5 end_task: Level: (4) ID = <10827> Status = 0 0 0 0 ok 2008-Apr-01 04:36:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:36:22 LOG5 end_task: Level: (3) ID = <10826> Status = 0 0 0 0 ok 2008-Apr-01 04:36:22 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Apr-01 04:36:22 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Apr-01 04:36:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Apr-01 04:36:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:36:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:36:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:36:22 LOG5 begin_task: Level: (3) ID = <10828> Status = 0 0 0 0 ok 2008-Apr-01 04:36:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:36:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:36:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:36:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:36:22 LOG5 end_task: Level: (3) ID = <10828> Status = 0 0 0 0 ok 2008-Apr-01 04:36:22 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Apr-01 04:36:22 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Apr-01 04:36:22 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Apr-01 04:36:22 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-01 04:36:22 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:36:22 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:36:22 LOG2 antvel: Parameters to Doppler: Topocentric 30982 2008 92 0.0 2008-Apr-01 04:36:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:36:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-01 04:36:22 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-01 04:36:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:36:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:36:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:36:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:36:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:36:22 LOG5 begin_task: Level: (3) ID = <10829> Status = 0 0 0 0 ok 2008-Apr-01 04:36:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:36:22 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.827597 2008.2524077242883 18.999933 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000026 3.528194444444448 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 1 16.767952061104555 3.633661083411421 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 2 16.763117271674460 3.567525635415255 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 3 16.763889084760180 3.462002263918028 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 4 16.769563851052592 3.422735350218439 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 5 16.774410270234682 3.489326073022489 2008-Apr-01 04:36:22 LOG4 log_alfabeam: ALFABEAM 6 16.773570309349740 3.594726070863462 2008-Apr-01 04:36:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200070 2008-Apr-01 04:36:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:36:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:36:23 LOG5 begin_task: Level: (4) ID = <10830> Status = 0 0 0 0 ok 2008-Apr-01 04:36:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:36:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:36:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30984.00 2008-Apr-01 04:36:23 INFO5 check_wapp_levels: WAPP power levels are between 1.159 and 1.521 (still bad) 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:25 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.909 and 1.146 2008-Apr-01 04:36:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:36:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:36:34 LOG5 end_task: Level: (4) ID = <10830> Status = 0 0 0 0 ok 2008-Apr-01 04:36:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:36:34 LOG5 end_task: Level: (3) ID = <10829> Status = 0 0 0 0 ok 2008-Apr-01 04:36:34 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Apr-01 04:36:34 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Apr-01 04:36:34 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-01 04:36:34 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:36:34 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:36:34 LOG2 antvel: Parameters to Doppler: Topocentric 30994 2008 92 0.0 2008-Apr-01 04:36:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:36:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-01 04:36:34 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-01 04:36:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:36:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:36:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:36:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:36:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:36:34 LOG5 begin_task: Level: (3) ID = <10831> Status = 0 0 0 0 ok 2008-Apr-01 04:36:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:36:34 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.830940 2008.2524081045453 18.999933 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000026 3.528194444444443 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 1 16.767974847899410 3.633699165390749 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 2 16.763125793873826 3.567798109229807 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 3 16.763874816395219 3.462237931047336 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 4 16.769541067996137 3.422696496381559 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 5 16.774401841771034 3.489052177386315 2008-Apr-01 04:36:34 LOG4 log_alfabeam: ALFABEAM 6 16.773584659614624 3.594492304406621 2008-Apr-01 04:36:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200071 2008-Apr-01 04:36:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:36:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:36:35 LOG5 begin_task: Level: (4) ID = <10832> Status = 0 0 0 0 ok 2008-Apr-01 04:36:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:36:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:36:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30996.00 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:36:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:36:46 LOG5 end_task: Level: (4) ID = <10832> Status = 0 0 0 0 ok 2008-Apr-01 04:36:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:36:46 LOG5 end_task: Level: (3) ID = <10831> Status = 0 0 0 0 ok 2008-Apr-01 04:36:46 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Apr-01 04:36:46 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Apr-01 04:36:46 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-01 04:36:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:36:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:36:46 LOG2 antvel: Parameters to Doppler: Topocentric 31006 2008 92 0.0 2008-Apr-01 04:36:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:36:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-01 04:36:46 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-01 04:36:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:36:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:36:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:36:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:36:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:36:46 LOG5 begin_task: Level: (3) ID = <10833> Status = 0 0 0 0 ok 2008-Apr-01 04:36:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:36:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.834282 2008.2524084848023 18.999933 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000033 3.528194444444439 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 1 16.767997627499607 3.633736119624357 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 2 16.763134368976772 3.568069985081309 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 3 16.763860608696000 3.462474127660049 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 4 16.769518291787698 3.422658770701288 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 5 16.774393359709695 3.488778871065806 2008-Apr-01 04:36:46 LOG4 log_alfabeam: ALFABEAM 6 16.773598950001443 3.594257998893337 2008-Apr-01 04:36:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200072 2008-Apr-01 04:36:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:36:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:36:47 LOG5 begin_task: Level: (4) ID = <10834> Status = 0 0 0 0 ok 2008-Apr-01 04:36:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:36:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:36:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31008.00 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:36:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:36:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:36:58 LOG5 end_task: Level: (4) ID = <10834> Status = 0 0 0 0 ok 2008-Apr-01 04:36:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:36:58 LOG5 end_task: Level: (3) ID = <10833> Status = 0 0 0 0 ok 2008-Apr-01 04:36:58 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Apr-01 04:36:58 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Apr-01 04:36:58 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-01 04:36:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:36:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:36:58 LOG2 antvel: Parameters to Doppler: Topocentric 31018 2008 92 0.0 2008-Apr-01 04:36:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:36:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-01 04:36:58 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-01 04:36:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:36:58 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:36:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:36:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:36:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:36:58 LOG5 begin_task: Level: (3) ID = <10835> Status = 0 0 0 0 ok 2008-Apr-01 04:36:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:36:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.837625 2008.2524088650596 18.999933 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 0 16.768749999999997 3.528194444444441 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 1 16.768020412789710 3.633771968297064 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 2 16.763143001768544 3.568341417355952 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 3 16.763846453560927 3.462710986635042 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 4 16.769495509544569 3.422622150582505 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 5 16.774384819315244 3.488505998924269 2008-Apr-01 04:36:58 LOG4 log_alfabeam: ALFABEAM 6 16.773613188654561 3.594023022459586 2008-Apr-01 04:36:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200073 2008-Apr-01 04:36:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:36:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:36:59 LOG5 begin_task: Level: (4) ID = <10836> Status = 0 0 0 0 ok 2008-Apr-01 04:36:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:36:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:36:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:36:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:36:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31020.00 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:37:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:37:10 LOG5 end_task: Level: (4) ID = <10836> Status = 0 0 0 0 ok 2008-Apr-01 04:37:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:37:10 LOG5 end_task: Level: (3) ID = <10835> Status = 0 0 0 0 ok 2008-Apr-01 04:37:10 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Apr-01 04:37:10 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Apr-01 04:37:10 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-01 04:37:10 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:37:10 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:37:10 LOG2 antvel: Parameters to Doppler: Topocentric 31030 2008 92 0.0 2008-Apr-01 04:37:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:37:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-01 04:37:10 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-01 04:37:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:37:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:37:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:37:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:37:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:37:10 LOG5 begin_task: Level: (3) ID = <10837> Status = 0 0 0 0 ok 2008-Apr-01 04:37:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:37:10 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.840967 2008.2524092453166 18.999933 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 0 16.768749999999986 3.528194444444444 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 1 16.768043189391694 3.633806690142146 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 2 16.763151686733426 3.568612235413787 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 3 16.763832359853275 3.462948357750795 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 4 16.769472735643351 3.422586657804870 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 5 16.774376226043017 3.488233732569732 2008-Apr-01 04:37:10 LOG4 log_alfabeam: ALFABEAM 6 16.773627366654313 3.593787524085205 2008-Apr-01 04:37:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200074 2008-Apr-01 04:37:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:37:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:37:11 LOG5 begin_task: Level: (4) ID = <10838> Status = 0 0 0 0 ok 2008-Apr-01 04:37:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:37:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:37:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31032.00 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:37:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:37:22 LOG5 end_task: Level: (4) ID = <10838> Status = 0 0 0 0 ok 2008-Apr-01 04:37:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:37:22 LOG5 end_task: Level: (3) ID = <10837> Status = 0 0 0 0 ok 2008-Apr-01 04:37:22 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Apr-01 04:37:22 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Apr-01 04:37:22 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-01 04:37:22 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:37:22 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:37:22 LOG2 antvel: Parameters to Doppler: Topocentric 31042 2008 92 0.0 2008-Apr-01 04:37:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:37:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-01 04:37:22 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-01 04:37:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:37:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:37:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:37:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:37:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:37:22 LOG5 begin_task: Level: (3) ID = <10839> Status = 0 0 0 0 ok 2008-Apr-01 04:37:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:37:22 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.844310 2008.2524096255736 18.999933 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000018 3.528194444444446 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 1 16.768065970190491 3.633840306229211 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 2 16.763160428712538 3.568882593132161 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 3 16.763818319527630 3.463186374492807 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 4 16.769449957201179 3.422552270888592 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 5 16.774367575101476 3.487961917365765 2008-Apr-01 04:37:22 LOG4 log_alfabeam: ALFABEAM 6 16.773641492090174 3.593551371291392 2008-Apr-01 04:37:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200075 2008-Apr-01 04:37:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:37:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:37:23 LOG5 begin_task: Level: (4) ID = <10840> Status = 0 0 0 0 ok 2008-Apr-01 04:37:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:37:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:37:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31044.00 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:37:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:37:34 LOG5 end_task: Level: (4) ID = <10840> Status = 0 0 0 0 ok 2008-Apr-01 04:37:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:37:34 LOG5 end_task: Level: (3) ID = <10839> Status = 0 0 0 0 ok 2008-Apr-01 04:37:34 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Apr-01 04:37:34 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Apr-01 04:37:34 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-01 04:37:34 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:37:34 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:37:34 LOG2 antvel: Parameters to Doppler: Topocentric 31054 2008 92 0.0 2008-Apr-01 04:37:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:37:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-01 04:37:34 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-01 04:37:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:37:34 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:37:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:37:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Apr-01 04:37:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:37:34 LOG5 begin_task: Level: (3) ID = <10841> Status = 0 0 0 0 ok 2008-Apr-01 04:37:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:37:34 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.847652 2008.2524100058306 18.999933 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000029 3.528194444444446 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 1 16.768088740812839 3.633872796847295 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 2 16.763169222114595 3.569152320640537 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 3 16.763804341366093 3.463424885853664 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 4 16.769427188589791 3.422519010056854 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 5 16.774358872021949 3.487690724163412 2008-Apr-01 04:37:34 LOG4 log_alfabeam: ALFABEAM 6 16.773655556122144 3.593314713857810 2008-Apr-01 04:37:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200076 2008-Apr-01 04:37:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:37:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:37:35 LOG5 begin_task: Level: (4) ID = <10842> Status = 0 0 0 0 ok 2008-Apr-01 04:37:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:37:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:37:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31056.00 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:37:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:37:46 LOG5 end_task: Level: (4) ID = <10842> Status = 0 0 0 0 ok 2008-Apr-01 04:37:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:37:46 LOG5 end_task: Level: (3) ID = <10841> Status = 0 0 0 0 ok 2008-Apr-01 04:37:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Apr-01 04:37:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Apr-01 04:37:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Apr-01 04:37:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:37:46 LOG5 begin_task: Level: (3) ID = <10843> Status = 0 0 0 0 ok 2008-Apr-01 04:37:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:37:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Apr-01 04:37:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:37:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:37:46 LOG5 end_task: Level: (3) ID = <10843> Status = 0 0 0 0 ok 2008-Apr-01 04:37:46 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Apr-01 04:37:46 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Apr-01 04:37:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Apr-01 04:37:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:37:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:37:46 LOG2 antvel: Parameters to Doppler: Topocentric 31066 2008 92 0.0 2008-Apr-01 04:37:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:37:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Apr-01 04:37:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Apr-01 04:37:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:37:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:37:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:37:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:37:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:37:46 LOG5 begin_task: Level: (3) ID = <10844> Status = 0 0 0 0 ok 2008-Apr-01 04:37:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:37:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.850994 2008.2524103860876 18.999933 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000050 3.528194444444443 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 1 16.768111507331110 3.633904172728851 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 2 16.763178069180771 3.569421490835174 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 3 16.763790421536317 3.463663954293883 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 4 16.769404423738205 3.422486864397570 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 5 16.774350114585733 3.487420079741199 2008-Apr-01 04:37:46 LOG4 log_alfabeam: ALFABEAM 6 16.773669562601278 3.593077489771741 2008-Apr-01 04:37:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200077 2008-Apr-01 04:37:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:37:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:37:47 LOG5 begin_task: Level: (4) ID = <10845> Status = 0 0 0 0 ok 2008-Apr-01 04:37:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:37:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Apr-01 04:37:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31068.00 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:37:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.538 > 1.4)! 2008-Apr-01 04:37:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.294 1.429 1.523 1.450 2008-Apr-01 04:37:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.312 1.376 1.452 2008-Apr-01 04:37:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.317 1.392 1.442 1.206 2008-Apr-01 04:37:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.418 1.451 1.538 1.283 2008-Apr-01 04:37:52 INFO5 check_wapp_levels: WAPP power levels are between 1.206 and 1.537 (still bad) 2008-Apr-01 04:37:54 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.536 (still bad) 2008-Apr-01 04:37:56 INFO5 check_wapp_levels: WAPP power levels are between 1.207 and 1.539 (still bad) 2008-Apr-01 04:37:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:37:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:37:58 LOG5 end_task: Level: (4) ID = <10845> Status = 0 0 0 0 ok 2008-Apr-01 04:37:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:37:58 LOG5 end_task: Level: (3) ID = <10844> Status = 0 0 0 0 ok 2008-Apr-01 04:37:58 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Apr-01 04:37:58 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Apr-01 04:37:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Apr-01 04:37:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:37:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:37:58 LOG2 antvel: Parameters to Doppler: Topocentric 31078 2008 92 0.0 2008-Apr-01 04:37:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:37:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Apr-01 04:37:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Apr-01 04:37:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:37:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:37:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:37:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:37:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:37:58 LOG5 begin_task: Level: (3) ID = <10846> Status = 0 0 0 0 ok 2008-Apr-01 04:37:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:37:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.854337 2008.2524107663448 18.999933 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000036 3.528194444444444 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 1 16.768134275814031 3.633934443381252 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 2 16.763186972211443 3.569690176011534 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 3 16.763776556269296 3.463903642897987 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 4 16.769381656578314 3.422455824223942 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 5 16.774341300513750 3.487149911469150 2008-Apr-01 04:37:58 LOG4 log_alfabeam: ALFABEAM 6 16.773683515315884 3.592839636386540 2008-Apr-01 04:37:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200078 2008-Apr-01 04:37:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:37:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:37:59 LOG5 begin_task: Level: (4) ID = <10847> Status = 0 0 0 0 ok 2008-Apr-01 04:37:59 INFO5 check_wapp_levels: WAPP power levels are between 1.208 and 1.538 (still bad) 2008-Apr-01 04:37:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:37:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Apr-01 04:37:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:37:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:37:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31080.00 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:01 INFO5 check_wapp_levels: WAPP power levels are between 1.195 and 1.547 (still bad) 2008-Apr-01 04:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:03 INFO5 check_wapp_levels: WAPP power levels are between 1.193 and 1.546 (still bad) 2008-Apr-01 04:38:05 INFO5 check_wapp_levels: WAPP power levels are between 1.194 and 1.546 (still bad) 2008-Apr-01 04:38:07 INFO5 check_wapp_levels: WAPP power levels are between 1.193 and 1.547 (still bad) 2008-Apr-01 04:38:09 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.546 (still bad) 2008-Apr-01 04:38:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:38:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:38:10 LOG5 end_task: Level: (4) ID = <10847> Status = 0 0 0 0 ok 2008-Apr-01 04:38:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:38:10 LOG5 end_task: Level: (3) ID = <10846> Status = 0 0 0 0 ok 2008-Apr-01 04:38:10 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Apr-01 04:38:10 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Apr-01 04:38:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Apr-01 04:38:10 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:38:10 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:38:10 LOG2 antvel: Parameters to Doppler: Topocentric 31090 2008 92 0.0 2008-Apr-01 04:38:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:38:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Apr-01 04:38:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Apr-01 04:38:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:38:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:38:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:38:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:10 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:38:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:38:10 LOG5 begin_task: Level: (3) ID = <10848> Status = 0 0 0 0 ok 2008-Apr-01 04:38:10 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:38:10 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.857679 2008.2524111466018 18.999933 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000011 3.528194444444447 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 1 16.768157031900145 3.633963591422837 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 2 16.763195925504807 3.569958207498348 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 3 16.763762754223741 3.464143799529835 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 4 16.769358901471172 3.422425907428722 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 5 16.774332435449775 3.486880389017073 2008-Apr-01 04:38:10 LOG4 log_alfabeam: ALFABEAM 6 16.773697405548020 3.592601304632134 2008-Apr-01 04:38:10 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200079 2008-Apr-01 04:38:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:38:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:38:11 LOG5 begin_task: Level: (4) ID = <10849> Status = 0 0 0 0 ok 2008-Apr-01 04:38:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:38:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Apr-01 04:38:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:11 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.547 (still bad) 2008-Apr-01 04:38:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31092.00 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:13 INFO5 check_wapp_levels: WAPP power levels are between 1.191 and 1.544 (still bad) 2008-Apr-01 04:38:15 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.544 (still bad) 2008-Apr-01 04:38:17 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.544 (still bad) 2008-Apr-01 04:38:19 INFO5 check_wapp_levels: WAPP power levels are between 1.192 and 1.546 (still bad) 2008-Apr-01 04:38:21 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.544 (still bad) 2008-Apr-01 04:38:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:38:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:38:22 LOG5 end_task: Level: (4) ID = <10849> Status = 0 0 0 0 ok 2008-Apr-01 04:38:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:38:22 LOG5 end_task: Level: (3) ID = <10848> Status = 0 0 0 0 ok 2008-Apr-01 04:38:22 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Apr-01 04:38:22 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Apr-01 04:38:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Apr-01 04:38:22 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:38:22 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:38:22 LOG2 antvel: Parameters to Doppler: Topocentric 31102 2008 92 0.0 2008-Apr-01 04:38:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:38:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Apr-01 04:38:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Apr-01 04:38:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:38:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:38:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:38:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:22 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:38:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:38:22 LOG5 begin_task: Level: (3) ID = <10850> Status = 0 0 0 0 ok 2008-Apr-01 04:38:22 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:38:22 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.861022 2008.2524115268589 18.999933 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000043 3.528194444444444 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 1 16.768179788469244 3.633991635134048 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 2 16.763204934038704 3.570225737836580 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 3 16.763749007497250 3.464384559127659 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 4 16.769336145538158 3.422397095321797 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 5 16.774323514464005 3.486611359063933 2008-Apr-01 04:38:22 LOG4 log_alfabeam: ALFABEAM 6 16.773711241245913 3.592362360555599 2008-Apr-01 04:38:22 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200080 2008-Apr-01 04:38:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:38:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:38:23 LOG5 begin_task: Level: (4) ID = <10851> Status = 0 0 0 0 ok 2008-Apr-01 04:38:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:38:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Apr-01 04:38:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31104.00 2008-Apr-01 04:38:24 INFO5 check_wapp_levels: WAPP power levels are between 1.190 and 1.545 (still bad) 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:26 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.538 (still bad) 2008-Apr-01 04:38:28 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.538 (still bad) 2008-Apr-01 04:38:30 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.538 (still bad) 2008-Apr-01 04:38:32 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.540 (still bad) 2008-Apr-01 04:38:34 INFO5 check_wapp_levels: WAPP power levels are between 1.184 and 1.538 (still bad) 2008-Apr-01 04:38:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:38:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:38:34 LOG5 end_task: Level: (4) ID = <10851> Status = 0 0 0 0 ok 2008-Apr-01 04:38:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:38:34 LOG5 end_task: Level: (3) ID = <10850> Status = 0 0 0 0 ok 2008-Apr-01 04:38:34 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Apr-01 04:38:34 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Apr-01 04:38:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Apr-01 04:38:34 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:38:34 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:38:34 LOG2 antvel: Parameters to Doppler: Topocentric 31114 2008 92 0.0 2008-Apr-01 04:38:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:38:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Apr-01 04:38:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Apr-01 04:38:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:38:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:38:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:38:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:34 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:38:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:38:34 LOG5 begin_task: Level: (3) ID = <10852> Status = 0 0 0 0 ok 2008-Apr-01 04:38:34 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:38:34 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.864364 2008.2524119071159 18.999933 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000011 3.528194444444444 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 1 16.768202531170513 3.634018558682115 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 2 16.763213992039034 3.570492599184008 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 3 16.763735324664722 3.464625768836606 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 4 16.769313403130138 3.422369404245944 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 5 16.774314543273352 3.486342990462072 2008-Apr-01 04:38:34 LOG4 log_alfabeam: ALFABEAM 6 16.773725013774097 3.592122955820413 2008-Apr-01 04:38:34 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200081 2008-Apr-01 04:38:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:38:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:38:35 LOG5 begin_task: Level: (4) ID = <10853> Status = 0 0 0 0 ok 2008-Apr-01 04:38:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:38:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Apr-01 04:38:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31116.00 2008-Apr-01 04:38:36 INFO5 check_wapp_levels: WAPP power levels are between 1.185 and 1.540 (still bad) 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:38 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.526 (still bad) 2008-Apr-01 04:38:40 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.526 (still bad) 2008-Apr-01 04:38:42 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.525 (still bad) 2008-Apr-01 04:38:44 INFO5 check_wapp_levels: WAPP power levels are between 1.172 and 1.525 (still bad) 2008-Apr-01 04:38:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:38:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:38:46 LOG5 end_task: Level: (4) ID = <10853> Status = 0 0 0 0 ok 2008-Apr-01 04:38:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:38:46 LOG5 end_task: Level: (3) ID = <10852> Status = 0 0 0 0 ok 2008-Apr-01 04:38:46 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Apr-01 04:38:46 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Apr-01 04:38:46 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Apr-01 04:38:46 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:38:46 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:38:46 LOG2 antvel: Parameters to Doppler: Topocentric 31126 2008 92 0.0 2008-Apr-01 04:38:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:38:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Apr-01 04:38:46 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Apr-01 04:38:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:38:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:38:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:38:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:46 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:38:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:38:46 LOG5 begin_task: Level: (3) ID = <10854> Status = 0 0 0 0 ok 2008-Apr-01 04:38:46 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:38:46 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.867707 2008.2524122873729 18.999826 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 0 16.768750000000011 3.528194444444441 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 1 16.768225261578092 3.634044356499631 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 2 16.763223099651483 3.570758761311933 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 3 16.763721704417460 3.464867403885341 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 4 16.769290672820748 3.422342839539489 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 5 16.774305521659738 3.486075313435503 2008-Apr-01 04:38:46 LOG4 log_alfabeam: ALFABEAM 6 16.773738724460561 3.591883115210707 2008-Apr-01 04:38:46 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200082 2008-Apr-01 04:38:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:38:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:38:47 LOG5 begin_task: Level: (4) ID = <10855> Status = 0 0 0 0 ok 2008-Apr-01 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.526 (still bad) 2008-Apr-01 04:38:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:38:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Apr-01 04:38:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31128.00 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 1.171 and 1.527 (still bad) 2008-Apr-01 04:38:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:38:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (1.523 > 1.4)! 2008-Apr-01 04:38:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.253 1.385 1.460 1.423 2008-Apr-01 04:38:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.376 1.273 1.310 1.420 2008-Apr-01 04:38:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.269 1.362 1.345 1.167 2008-Apr-01 04:38:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.402 1.443 1.523 1.278 2008-Apr-01 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 1.165 and 1.523 (still bad) 2008-Apr-01 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.522 (still bad) 2008-Apr-01 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 1.167 and 1.524 (still bad) 2008-Apr-01 04:38:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:38:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:38:58 LOG5 end_task: Level: (4) ID = <10855> Status = 0 0 0 0 ok 2008-Apr-01 04:38:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:38:58 LOG5 end_task: Level: (3) ID = <10854> Status = 0 0 0 0 ok 2008-Apr-01 04:38:58 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Apr-01 04:38:58 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Apr-01 04:38:58 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Apr-01 04:38:58 LOG2 antvel: Precessing RA = 16:46:07.5 Dec = +03:31:41.5 Epoch = 2008.25241 J 2008-Apr-01 04:38:58 LOG2 antvel: Computed apparent RA = 16:46:33.5 Dec = +03:30:31.4 2008-Apr-01 04:38:58 LOG2 antvel: Parameters to Doppler: Topocentric 31138 2008 92 0.0 2008-Apr-01 04:38:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Apr-01 04:38:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Apr-01 04:38:58 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Apr-01 04:38:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Apr-01 04:38:58 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Apr-01 04:38:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:38:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:58 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Apr-01 04:38:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Apr-01 04:38:58 LOG5 begin_task: Level: (3) ID = <10856> Status = 0 0 0 0 ok 2008-Apr-01 04:38:58 INFO3 take_spectra: Starting take_spectra 10 1 2008-Apr-01 04:38:58 LOG5 log_alfabeam: Parameters: 16.768750000000001 3.5281944444444444 16.871049 2008.2524126676301 18.999933 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 0 16.768749999999986 3.528194444444444 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 1 16.768247999257810 3.634069082496115 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 2 16.763232265687886 3.571024603859513 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 3 16.763708135640105 3.465109791522159 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 4 16.769267934603800 3.422317347261177 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 5 16.774296441114501 3.485807947015930 2008-Apr-01 04:38:58 LOG4 log_alfabeam: ALFABEAM 6 16.773752384441220 3.591642513192877 2008-Apr-01 04:38:58 INFO2 take_spectra: Starting WAPP+GALFA scan: 809200083 2008-Apr-01 04:38:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Apr-01 04:38:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Apr-01 04:38:59 LOG5 begin_task: Level: (4) ID = <10857> Status = 0 0 0 0 ok 2008-Apr-01 04:38:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Apr-01 04:38:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Apr-01 04:38:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Apr-01 04:38:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.522 (still bad) 2008-Apr-01 04:38:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31140.00 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Apr-01 04:39:01 INFO5 check_wapp_levels: WAPP power levels are between 1.168 and 1.522 (still bad) 2008-Apr-01 04:39:03 INFO5 check_wapp_levels: WAPP power levels are between 1.161 and 1.523 (still bad) 2008-Apr-01 04:39:05 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.522 (still bad) 2008-Apr-01 04:39:07 INFO5 check_wapp_levels: WAPP power levels are between 1.161 and 1.524 (still bad) 2008-Apr-01 04:39:09 INFO5 check_wapp_levels: WAPP power levels are between 1.161 and 1.521 (still bad) 2008-Apr-01 04:39:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Apr-01 04:39:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Apr-01 04:39:10 LOG5 end_task: Level: (4) ID = <10857> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Apr-01 04:39:10 LOG5 end_task: Level: (3) ID = <10856> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 INFO2 smartfreq: Switching off CAL 2008-Apr-01 04:39:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Apr-01 04:39:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Apr-01 04:39:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Apr-01 04:39:10 LOG5 begin_task: Level: (3) ID = <10858> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Apr-01 04:39:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Apr-01 04:39:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Apr-01 04:39:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Apr-01 04:39:10 LOG5 end_task: Level: (3) ID = <10858> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 STOP finish_task: Finishing task 'smart frequency switching' 2008-Apr-01 04:39:10 LOG5 finish_task: Level: (2) ID = <10789> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Apr-01 04:39:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:39:10 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Apr-01 04:39:10 LOG5 end_task: Level: (2) ID = <10789> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 WARNING smartfreq: WARNING smart frequency switching changes the frequency settings! 2008-Apr-01 04:39:10 ALERT smartfreq: Don't forget to set new frequencies! 2008-Apr-01 04:39:10 NOTE run_command_file: DONE with command file processing 2008-Apr-01 04:39:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Apr-01 04:39:10 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Apr-01 04:39:10 LOG5 finish_task: Level: (1) ID = <10774> Status = 0 0 0 0 ok 2008-Apr-01 04:39:10 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Apr-01 04:39:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Apr-01 04:39:10 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Apr-01 04:39:10 LOG5 end_task: Level: (1) ID = <10774> Status = 0 0 0 0 ok 2008-Apr-01 04:39:11 INFO5 check_wapp_levels: WAPP power levels are between 1.160 and 1.521 (still bad) 2008-Apr-01 04:39:27 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Apr-01 04:39:27 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Apr-01 04:39:27 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Apr-01 04:39:27 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Apr-01 04:39:27 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Apr-01 04:39:28 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Apr-01 04:39:28 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Apr-01 04:39:28 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Apr-01 04:39:28 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Apr-01 04:39:28 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Apr-01 04:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Apr-01 04:39:30 LOG3 exec_msg: Closing socket