2010-Jan-13 01:35:10 BEGIN executive: CIMA executive starting ... 2010-Jan-13 01:35:10 NOTE executive: STARTING NEW CIMA SESSION 2010-Jan-13 01:35:10 INFO1 executive: Using CIMA version 3.1.07 'smart' from 2010-01-12 17:25 2010-Jan-13 01:35:10 INFO4 executive: This is an ON-LINE session 2010-Jan-13 01:35:10 INFO4 executive: This is a LOCAL session 2010-Jan-13 01:35:10 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Jan-13 01:35:10 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Tom' 2010-Jan-13 01:35:10 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100113' 2010-Jan-13 01:35:10 LOG2 log_preferences: Currently applied preferences: 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(dailylog) = daily 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(datawindow) = open 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(logcolours) = full 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(displayformat) = long 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(logformat) = new 2010-Jan-13 01:35:10 LOG2 log_preferences: prefs(fontsize) = 3 2010-Jan-13 01:35:10 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-13 01:35:10 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Jan-13 01:35:10 ALERT executive: CIMA executive ready 2010-Jan-13 01:35:12 NOTE frontend: CIMA frontend ready 2010-Jan-13 01:35:15 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2010-Jan-13 01:35:15 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Jan-13 01:35:18 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Jan-13 01:35:18 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Jan-13 01:35:18 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Jan-13 01:35:18 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-13 01:35:18 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-13 01:35:18 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-13 01:35:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-13 01:35:18 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-13 01:35:18 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-13 01:35:18 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-13 01:35:18 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-13 01:35:18 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-13 01:35:18 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Jan-13 01:35:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:35:18 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-13 01:35:18 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Jan-13 01:35:22 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Jan-13 01:35:22 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:58 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Jan-13 01:35:58 LOG4 exec_msg: From OBSERVER: track_new_source unknown 084500 +200000 J 0 0 main small /share/obs4/usr/aoui/calib.cat 0.0 Topocentric velocity(optical) 0 0 0 0 0 2010-Jan-13 01:35:58 LOG1 track_new_source: Calling 'track_new_source unknown 084500 +200000 J 0 0 main small /share/obs4/usr/aoui/calib.cat 0.0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Jan-13 01:35:58 BEGIN begin_task: Starting task 'selecting new source' 2010-Jan-13 01:35:58 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-13 01:35:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {unknown} INFO {Selecting source 'unknown' ...} 2010-Jan-13 01:35:58 LOG3 track_source: Calling 'track_source unknown 084500 +200000 J 0 0 main small /share/obs4/usr/aoui/calib.cat 0.0 Topocentric velocity(optical)' 2010-Jan-13 01:35:58 START begin_task: Starting task 'sending tracking commands' 2010-Jan-13 01:35:58 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-13 01:35:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {unknown} INFO {Slewing to source 'unknown' ...} 2010-Jan-13 01:35:58 INFO1 track_source: Starting to track unknown 2010-Jan-13 01:35:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "unknown" 2010-Jan-13 01:35:58 LOG3 vw_send: To DATATAKING: set ra 084500 2010-Jan-13 01:35:59 LOG3 vw_send: To DATATAKING: set dec +200000 2010-Jan-13 01:35:59 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-13 01:35:59 LOG3 vw_send: To DATATAKING: pnt tr 084500 +200000 -CJ 2010-Jan-13 01:35:59 LOG3 vw_send: To DATATAKING: dopsetvel 0.0 topo 2010-Jan-13 01:35:59 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-13 01:35:59 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-13 01:35:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:35:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-13 01:35:59 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Jan-13 01:35:59 START begin_task: Starting task 'applying pointing corrections' 2010-Jan-13 01:35:59 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Jan-13 01:35:59 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Jan-13 01:35:59 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Jan-13 01:35:59 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Jan-13 01:35:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:35:59 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Jan-13 01:35:59 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 STOP finish_task: Finishing task 'selecting new source' 2010-Jan-13 01:35:59 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 DONE finish_task: DONE finished selecting: new source 2010-Jan-13 01:35:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:35:59 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Jan-13 01:35:59 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "unknown" 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: set ra 084500 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: set dec +200000 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% 084500 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% +200000 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: pnt tr 084500 +200000 -CJ 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 0.0 topo 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Jan-13 01:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:38:57 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-13 01:38:57 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-13 01:38:57 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-13 01:38:57 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-13 01:38:57 LOG5 begin_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-13 01:38:57 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-13 01:38:57 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-13 01:38:57 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-13 01:38:57 LOG5 end_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-13 01:38:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-13 01:39:00 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-13 01:39:00 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-13 01:39:00 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-13 01:39:00 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-13 01:39:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.77) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:39:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 563.5646 1.7671 RA/Dec = 08:45:00 +20:00:00 2010-Jan-13 01:39:22 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc10.cmd' 2010-Jan-13 01:39:25 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc10.cmd' to executive ... 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs_10.conf} 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {CATALOG a2010.cat} 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {GOTO galfasrc} 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {ALFAANGLE 19} 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {WAITTRACK} 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Jan-13 01:39:25 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-13 01:39:25 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc10.cmd 1 1 6 2010-Jan-13 01:39:25 LOG4 run_command_file: Calling 'run_command_file command_galfasrc10.cmd 1 1 6' 2010-Jan-13 01:39:25 BEGIN begin_task: Starting task 'running command file 'command_galfasrc10.cmd'' 2010-Jan-13 01:39:25 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-13 01:39:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc10.cmd' ...} 2010-Jan-13 01:39:26 NOTE run_command_file: Starting execution of command file 'command_galfasrc10.cmd' from line 1 2010-Jan-13 01:39:26 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs_10.conf' 2010-Jan-13 01:39:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 01:39:26 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-13 01:39:26 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Jan-13 01:39:26 LOG2 CIMA-antvel: Precessing RA = 08:45:00.0 Dec = +20:00:00.0 Epoch = 2010.03578 J 2010-Jan-13 01:39:26 LOG2 CIMA-antvel: Computed apparent RA = 08:45:37.1 Dec = +19:57:39.4 2010-Jan-13 01:39:26 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 20365 2010 13 0.0 2010-Jan-13 01:39:26 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Jan-13 01:39:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 01:39:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-13 01:39:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 01:39:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-13 01:39:28 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-13 01:39:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-13 01:39:28 INFO1 config_iflo: Selecting receiver ALFA 2010-Jan-13 01:39:28 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Jan-13 01:39:28 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Jan-13 01:39:28 START begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-13 01:39:28 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-13 01:39:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-13 01:39:28 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-13 01:39:28 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-13 01:39:28 LOG5 finish_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Jan-13 01:39:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:39:28 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-13 01:39:28 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Jan-13 01:39:28 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Jan-13 01:39:28 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Jan-13 01:39:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Jan-13 01:39:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:39:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:39:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:39:28 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:39:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:39:28 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-13 01:39:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:39:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-13 01:39:28 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Jan-13 01:39:28 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-13 01:39:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Jan-13 01:39:29 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-13 01:39:29 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Jan-13 01:39:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-13 01:39:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:39:29 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-13 01:39:29 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Jan-13 01:39:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:39:44 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-13 01:39:44 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-13 01:39:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-13 01:39:44 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-13 01:39:44 LOG5 finish_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-13 01:39:44 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-13 01:39:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:39:44 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-13 01:39:44 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-13 01:39:44 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-13 01:39:44 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-13 01:39:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-13 01:39:45 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-13 01:39:45 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-13 01:39:45 START begin_task: Starting task 'selecting calibration port' 2010-Jan-13 01:39:45 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-13 01:39:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-13 01:39:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:39:45 START begin_task: Starting task 'waiting on calport' 2010-Jan-13 01:39:45 LOG5 begin_task: Level: (4) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:39:45 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-13 01:39:45 LOG5 end_task: Level: (4) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-13 01:39:45 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-13 01:39:45 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:39:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:39:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:39:45 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:39:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:39:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:39:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:39:45 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-13 01:39:45 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-13 01:39:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:39:45 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:39:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:39:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:39:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:39:45 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:39:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:39:46 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-13 01:39:46 LOG5 finish_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:39:46 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-13 01:39:46 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 COMMAND run_command_line: EXECUTING command 7: 'CATALOG a2010.cat' 2010-Jan-13 01:39:46 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2010-Jan-13 01:39:46 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Jan-13 01:39:46 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2010-Jan-13 01:39:46 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Jan-13 01:39:46 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Jan-13 01:39:46 LOG3 track_source: Calling 'track_source galfasrc 085000.0 +200430 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Jan-13 01:39:46 START begin_task: Starting task 'sending tracking commands' 2010-Jan-13 01:39:46 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Jan-13 01:39:46 INFO1 track_source: Starting to track galfasrc 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: set ra 085000.0 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: set dec +200430 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: pnt tr 085000.0 +200430 -CJ 2010-Jan-13 01:39:46 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-13 01:39:46 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-13 01:39:46 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:39:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-13 01:39:46 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Jan-13 01:39:46 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:39:46 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Jan-13 01:39:46 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2010-Jan-13 01:39:46 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-13 01:39:46 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:39:46 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-13 01:39:46 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-13 01:39:46 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-13 01:39:46 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-13 01:39:46 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-13 01:39:46 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-13 01:39:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:39:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0000.fits 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-13 01:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-13 01:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-13 01:39:47 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100113.a2010.0000.fits} 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: set ra 085000.0 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: set dec +200430 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: vw% 085000.0 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: vw% +200430 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: pnt tr 085000.0 +200430 -CJ 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-13 01:39:47 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2010-Jan-13 01:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:40:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-13 01:40:09 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-13 01:40:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-13 01:40:10 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-13 01:40:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-13 01:40:10 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:40:10 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-13 01:40:10 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-13 01:40:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:40:10 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-13 01:40:10 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-13 01:40:10 COMMAND run_command_line: EXECUTING command 10: 'WAITTRACK' 2010-Jan-13 01:40:10 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Jan-13 01:40:10 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-13 01:40:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-13 01:40:10 LOG3 waittrk: Start waittrk 5 2010-Jan-13 01:40:10 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-13 01:40:10 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-13 01:40:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-13 01:40:15 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-13 01:40:15 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-13 01:40:15 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-13 01:40:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-13 01:40:46 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-13 01:40:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-13 01:40:46 INFO2 waittrk: Now tracking galfasrc 2010-Jan-13 01:40:46 LOG4 waittrk: Current telescope position: Az = 581.16 ZA = 2.27 2010-Jan-13 01:40:46 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-13 01:40:46 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-13 01:40:46 DONE finish_task: DONE finished waiting: telescope on source 2010-Jan-13 01:40:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:40:46 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-13 01:40:46 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-13 01:40:46 COMMAND run_command_line: EXECUTING command 14: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Jan-13 01:40:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-13 01:40:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 01:40:47 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Jan-13 01:40:47 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-13 01:40:47 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-13 01:40:47 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-Jan-13 01:40:47 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-13 01:40:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-13 01:40:47 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 01:40:47 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-13 01:40:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 01:40:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 01:40:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:40:47 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 01:40:47 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-13 01:40:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 01:40:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:40:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 01:40:47 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-13 01:40:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 01:40:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:40:47 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 01:40:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:40:47 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-13 01:40:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:40:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:40:48 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-13 01:40:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:40:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 01:40:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:40:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:40:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:40:48 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-13 01:40:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:40:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:40:48 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-13 01:40:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:40:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:40:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 01:40:48 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-13 01:40:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:40:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:40:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:40:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:40:49 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100113.a2010.0000.fits' is empty! 2010-Jan-13 01:40:49 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-13 01:40:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-13 01:40:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 01:40:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:40:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:40:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:40:49 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-13 01:40:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:40:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:40:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:40:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:40:49 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-13 01:40:49 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-13 01:40:49 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:40:49 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-13 01:40:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-13 01:40:49 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-13 01:40:49 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-13 01:40:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-13 01:40:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:40:49 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-13 01:40:49 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-13 01:40:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-13 01:40:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:40:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-13 01:40:52 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-13 01:40:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-13 01:40:52 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:40:52 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-13 01:40:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-13 01:40:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:40:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:40:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:40:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:40:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-13 01:40:52 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-13 01:40:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-13 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:53 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-13 01:40:53 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-13 01:40:53 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 3 dB 2010-Jan-13 01:40:53 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-Jan-13 01:40:53 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-13 01:40:53 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-13 01:40:53 LOG5 end_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.884 1.019 ALFA beam 1: 1.030 1.070 2010-Jan-13 01:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.886 0.954 ALFA beam 3: 0.960 1.039 2010-Jan-13 01:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.953 0.907 ALFA beam 5: 0.960 1.020 2010-Jan-13 01:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.955 1.033 ALFA beam 7: 1.038 0.977 2010-Jan-13 01:40:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:40:53 LOG5 finish_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-13 01:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:40:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:40:53 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 01:40:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:40:53 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-13 01:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:40:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:40:53 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Jan-13 01:40:53 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:40:53 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 01:40:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:40:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03578 J 2010-Jan-13 01:40:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:40:53 LOG2 antvel: Parameters to Doppler: Topocentric 20452 2010 13 0.0 2010-Jan-13 01:40:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:40:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 01:40:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 01:40:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:40:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:40:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:40:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:40:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Jan-13 01:40:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:40:53 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-13 01:40:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:40:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.737521 2010.0357838365403 18.999933 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333323 20.075000000000010 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 1 8.829260247987644 19.985786631153442 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 2 8.836114388913042 19.991195019571247 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 3 8.840355739881835 20.078945531536686 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 4 8.837318768844602 20.165173220551072 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 5 8.830251149650671 20.158096766367002 2010-Jan-13 01:40:53 LOG4 log_alfabeam: ALFABEAM 6 8.826438453332841 20.066559416922530 2010-Jan-13 01:40:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300025 2010-Jan-13 01:40:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:40:54 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-13 01:40:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:40:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:40:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:40:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:40:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20455.00 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:40:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:41:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:41:05 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-13 01:41:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:41:05 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-13 01:41:05 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Jan-13 01:41:05 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:41:05 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 01:41:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:41:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03578 J 2010-Jan-13 01:41:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:41:05 LOG2 antvel: Parameters to Doppler: Topocentric 20465 2010 13 0.0 2010-Jan-13 01:41:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:41:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 01:41:05 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 01:41:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:41:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:41:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:41:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Jan-13 01:41:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:41:05 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-13 01:41:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:41:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.741142 2010.0357842484855 18.999933 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333309 20.075000000000003 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 1 8.829370763113683 19.984804866317749 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 2 8.836215600872197 19.991887630359798 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 3 8.840350754179291 20.080639711422570 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 4 8.837205550126040 20.166147822379099 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 5 8.830146246469486 20.157318384767454 2010-Jan-13 01:41:05 LOG4 log_alfabeam: ALFABEAM 6 8.826451084990973 20.064830346452052 2010-Jan-13 01:41:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300026 2010-Jan-13 01:41:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:41:06 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-13 01:41:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:41:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:41:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:41:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20467.00 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:41:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:41:17 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-13 01:41:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:41:17 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-13 01:41:17 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Jan-13 01:41:17 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:41:17 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 01:41:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:41:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03578 J 2010-Jan-13 01:41:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:41:17 LOG2 antvel: Parameters to Doppler: Topocentric 20477 2010 13 0.0 2010-Jan-13 01:41:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:41:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 01:41:17 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 01:41:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:41:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:41:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:41:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Jan-13 01:41:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:41:17 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-13 01:41:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:41:17 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.744485 2010.0357846287425 18.999933 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333330 20.075000000000003 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 1 8.829476878745202 19.983897142816421 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 2 8.836311000536874 19.992568262140644 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 3 8.840344091305607 20.082248804931066 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 4 8.837096880390588 20.167047537074350 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 5 8.830047538254162 20.156554637540236 2010-Jan-13 01:41:17 LOG4 log_alfabeam: ALFABEAM 6 8.826465088997114 20.063191539275458 2010-Jan-13 01:41:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300027 2010-Jan-13 01:41:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:41:18 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-13 01:41:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:41:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:41:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:41:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20479.00 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:41:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:41:29 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-13 01:41:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:41:29 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-13 01:41:29 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Jan-13 01:41:29 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:41:29 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 01:41:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:41:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:41:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:41:29 LOG2 antvel: Parameters to Doppler: Topocentric 20489 2010 13 0.0 2010-Jan-13 01:41:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:41:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 01:41:29 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 01:41:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:41:29 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:41:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:41:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Jan-13 01:41:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:41:29 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-13 01:41:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:41:29 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.747827 2010.0357850089995 18.999933 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333321 20.075000000000003 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 1 8.829587010810643 19.982990181553710 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 2 8.836408220856958 19.993290341914854 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 3 8.840335289603605 20.083901082789115 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 4 8.836984141878121 20.167945056921422 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 5 8.829947123969763 20.155745607036692 2010-Jan-13 01:41:29 LOG4 log_alfabeam: ALFABEAM 6 8.826481502760400 20.061512256019245 2010-Jan-13 01:41:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300028 2010-Jan-13 01:41:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:41:30 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-13 01:41:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:41:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:41:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:41:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20491.00 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:41:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:41:41 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-13 01:41:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:41:41 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-13 01:41:41 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Jan-13 01:41:41 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:41:41 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 01:41:41 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:41:41 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:41:41 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:41:41 LOG2 antvel: Parameters to Doppler: Topocentric 20501 2010 13 0.0 2010-Jan-13 01:41:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:41:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 01:41:41 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 01:41:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:41:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:41:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Jan-13 01:41:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:41:41 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-13 01:41:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:41:41 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.751170 2010.0357853892565 18.999933 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333325 20.075000000000003 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 1 8.829701346228978 19.982085344389443 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 2 8.836507280134413 19.994056414329833 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 3 8.840324175773393 20.085597889370000 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 4 8.836867149295019 20.168838918982054 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 5 8.829845002674933 20.154888622977527 2010-Jan-13 01:41:41 LOG4 log_alfabeam: ALFABEAM 6 8.826500505006168 20.059791448749120 2010-Jan-13 01:41:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300029 2010-Jan-13 01:41:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:41:42 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-13 01:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:41:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:41:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:41:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20503.00 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:41:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:41:53 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-13 01:41:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:41:53 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-13 01:41:53 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Jan-13 01:41:53 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:41:53 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 01:41:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:41:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:41:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:41:53 LOG2 antvel: Parameters to Doppler: Topocentric 20513 2010 13 0.0 2010-Jan-13 01:41:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:41:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 01:41:53 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 01:41:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:41:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:41:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:41:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Jan-13 01:41:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:41:53 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-13 01:41:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:41:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.754512 2010.0357857695137 18.999933 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333300 20.075000000000010 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 1 8.829819932904320 19.981185263122811 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 2 8.836608067707457 19.994868172960985 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 3 8.840310580476494 20.087338419594111 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 4 8.836745860184976 20.169726400929893 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 5 8.829741307548153 20.153981988121387 2010-Jan-13 01:41:53 LOG4 log_alfabeam: ALFABEAM 6 8.826522259649888 20.058030267186513 2010-Jan-13 01:41:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300030 2010-Jan-13 01:41:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:41:54 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-13 01:41:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:41:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:41:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:41:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:41:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20515.00 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:41:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:42:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:42:05 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-13 01:42:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:42:05 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-13 01:42:05 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Jan-13 01:42:05 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:42:05 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 01:42:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:42:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:42:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:42:05 LOG2 antvel: Parameters to Doppler: Topocentric 20525 2010 13 0.0 2010-Jan-13 01:42:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:42:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 01:42:05 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 01:42:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:42:05 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:42:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:42:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Jan-13 01:42:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:42:05 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-13 01:42:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:42:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.757855 2010.0357861497707 18.999933 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333321 20.075000000000003 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 1 8.829942951995204 19.980291684373267 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 2 8.836710579864562 19.995728284947948 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 3 8.840294311848156 20.089123759462371 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 4 8.836620096364351 20.170605650537265 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 5 8.829636062665974 20.153022938866332 2010-Jan-13 01:42:05 LOG4 log_alfabeam: ALFABEAM 6 8.826546960938511 20.056227960349002 2010-Jan-13 01:42:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300031 2010-Jan-13 01:42:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:42:06 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-13 01:42:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:42:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:42:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:42:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20527.00 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:42:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:42:17 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-13 01:42:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:42:17 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-13 01:42:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-13 01:42:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 01:42:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 01:42:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:42:17 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-13 01:42:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:42:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 01:42:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:42:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:42:17 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-13 01:42:17 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Jan-13 01:42:17 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:42:17 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 01:42:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:42:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:42:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:42:17 LOG2 antvel: Parameters to Doppler: Topocentric 20537 2010 13 0.0 2010-Jan-13 01:42:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:42:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 01:42:18 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 01:42:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:42:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:42:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:42:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Jan-13 01:42:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:42:18 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-13 01:42:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:42:18 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.761197 2010.0357865300277 18.999933 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333297 20.075000000000010 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 1 8.830070432224254 19.979407626863871 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 2 8.836814677596003 19.996638430880754 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 3 8.840275188813589 20.090952698128692 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 4 8.836489836132060 20.171473559606159 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 5 8.829529432148016 20.152009835618156 2010-Jan-13 01:42:18 LOG4 log_alfabeam: ALFABEAM 6 8.826574780373299 20.054386112151594 2010-Jan-13 01:42:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300032 2010-Jan-13 01:42:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:42:18 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-13 01:42:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:42:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:42:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:42:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20539.00 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:42:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:42:29 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-13 01:42:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:42:29 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-13 01:42:29 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Jan-13 01:42:29 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:42:29 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 01:42:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:42:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:42:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:42:29 LOG2 antvel: Parameters to Doppler: Topocentric 20549 2010 13 0.0 2010-Jan-13 01:42:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:42:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 01:42:29 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 01:42:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:42:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:42:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:42:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Jan-13 01:42:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:42:29 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-13 01:42:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:42:29 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.764540 2010.0357869102847 18.999933 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333293 20.075000000000003 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 1 8.830202542583065 19.978535250587402 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 2 8.836920330740064 19.997601349801794 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 3 8.840253002588240 20.092825977777665 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 4 8.836354915057072 20.172327861454054 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 5 8.829421469441769 20.150939884273065 2010-Jan-13 01:42:29 LOG4 log_alfabeam: ALFABEAM 6 8.826605925142571 20.052504349674056 2010-Jan-13 01:42:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300033 2010-Jan-13 01:42:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:42:30 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-13 01:42:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:42:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:42:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:42:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20551.00 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:42:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:42:41 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-13 01:42:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:42:41 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-13 01:42:41 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Jan-13 01:42:41 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:42:41 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 01:42:41 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:42:41 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:42:41 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:42:41 LOG2 antvel: Parameters to Doppler: Topocentric 20561 2010 13 0.0 2010-Jan-13 01:42:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:42:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 01:42:41 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 01:42:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:42:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:42:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:42:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Jan-13 01:42:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:42:41 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-13 01:42:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:42:41 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.767882 2010.0357872905417 18.999933 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333309 20.075000000000010 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 1 8.830339285057955 19.977677971148527 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 2 8.837027367899260 19.998618638495302 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 3 8.840227563632427 20.094741893060714 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 4 8.836215339947520 20.173165056609136 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 5 8.829312373340347 20.149811586792495 2010-Jan-13 01:42:41 LOG4 log_alfabeam: ALFABEAM 6 8.826640570115936 20.050584771802502 2010-Jan-13 01:42:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300034 2010-Jan-13 01:42:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:42:42 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-13 01:42:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:42:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:42:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:42:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20563.00 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:42:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:42:53 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-13 01:42:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:42:53 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-13 01:42:53 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Jan-13 01:42:53 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:42:53 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 01:42:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:42:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:42:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:42:53 LOG2 antvel: Parameters to Doppler: Topocentric 20573 2010 13 0.0 2010-Jan-13 01:42:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:42:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 01:42:53 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 01:42:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:42:53 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:42:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:42:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Jan-13 01:42:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:42:53 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-13 01:42:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:42:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.771225 2010.035787670799 18.999933 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333327 20.075000000000003 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 1 8.830480808757722 19.976838375334914 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 2 8.837135728160725 19.999693037156302 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 3 8.840198649403723 20.096700749855152 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 4 8.836070968047883 20.173982455273684 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 5 8.829202230639432 20.148622202957046 2010-Jan-13 01:42:53 LOG4 log_alfabeam: ALFABEAM 6 8.826678931276332 20.048627467820630 2010-Jan-13 01:42:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300035 2010-Jan-13 01:42:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:42:54 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-13 01:42:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:42:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:42:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:42:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:42:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20575.00 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:43:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:43:05 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-13 01:43:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:43:05 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-13 01:43:05 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Jan-13 01:43:05 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:43:05 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 01:43:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:43:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:43:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:43:05 LOG2 antvel: Parameters to Doppler: Topocentric 20585 2010 13 0.0 2010-Jan-13 01:43:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:43:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 01:43:05 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 01:43:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:43:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:43:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:43:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Jan-13 01:43:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:43:05 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-13 01:43:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:43:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.774567 2010.035788051056 18.999933 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333320 20.074999999999996 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 1 8.830627080227096 19.976020264944626 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 2 8.837245204180281 20.000825966799404 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 3 8.840166066913703 20.098700257007380 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 4 8.835921843526236 20.174776183290348 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 5 8.829091277770299 20.147370482124686 2010-Jan-13 01:43:05 LOG4 log_alfabeam: ALFABEAM 6 8.826721180910997 20.046635130348527 2010-Jan-13 01:43:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300036 2010-Jan-13 01:43:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:43:06 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-13 01:43:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:43:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:43:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:43:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20587.00 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:43:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:43:17 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-13 01:43:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:43:17 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-13 01:43:17 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Jan-13 01:43:17 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:43:17 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 01:43:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:43:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:43:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:43:17 LOG2 antvel: Parameters to Doppler: Topocentric 20597 2010 13 0.0 2010-Jan-13 01:43:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:43:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 01:43:17 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 01:43:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:43:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:43:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:43:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Jan-13 01:43:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:43:17 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-13 01:43:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:43:17 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.777909 2010.035788431313 18.999933 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333290 20.075000000000003 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 1 8.830778173891241 19.975226877893547 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 2 8.837355667376610 20.002019709526220 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 3 8.840129596388254 20.100739573909070 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 4 8.835767901096409 20.175542917872043 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 5 8.828979671449670 20.146054248594510 2010-Jan-13 01:43:17 LOG4 log_alfabeam: ALFABEAM 6 8.826767523338637 20.044609002950580 2010-Jan-13 01:43:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300037 2010-Jan-13 01:43:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:43:18 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-13 01:43:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:43:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:43:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:43:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20599.00 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:43:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:43:29 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-13 01:43:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:43:29 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-13 01:43:29 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Jan-13 01:43:29 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:43:29 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 01:43:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:43:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:43:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:43:29 LOG2 antvel: Parameters to Doppler: Topocentric 20609 2010 13 0.0 2010-Jan-13 01:43:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:43:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 01:43:29 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 01:43:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:43:29 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:43:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:43:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Jan-13 01:43:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:43:29 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-13 01:43:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:43:29 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.781252 2010.03578881157 18.999933 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333334 20.074999999999992 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 1 8.830934149099797 19.974461663268894 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 2 8.837466971445600 20.003276496316367 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 3 8.840089013881865 20.102817584848616 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 4 8.835609091539942 20.176279131316772 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 5 8.828867586948013 20.144671415335200 2010-Jan-13 01:43:29 LOG4 log_alfabeam: ALFABEAM 6 8.826818163901883 20.042550607598265 2010-Jan-13 01:43:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300038 2010-Jan-13 01:43:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:43:30 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-13 01:43:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:43:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:43:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:43:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20611.00 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:43:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:43:41 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-13 01:43:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:43:41 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-13 01:43:41 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Jan-13 01:43:41 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-13 01:43:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 01:43:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:43:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:43:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:43:41 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-13 01:43:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:43:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:43:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:43:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:43:41 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-13 01:43:41 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-13 01:43:41 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Jan-13 01:43:41 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:43:41 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 01:43:41 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:43:41 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:43:41 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:43:41 LOG2 antvel: Parameters to Doppler: Topocentric 20621 2010 13 0.0 2010-Jan-13 01:43:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:43:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 01:43:41 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 01:43:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:43:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:43:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:43:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Jan-13 01:43:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:43:41 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-13 01:43:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:43:41 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.784594 2010.0357891918272 18.999933 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333279 20.075000000000003 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 1 8.831094901199769 19.973728918333155 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 2 8.837578850800165 20.004597264979228 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 3 8.840044135108416 20.104930961400299 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 4 8.835445533155912 20.176980485110882 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 5 8.828755319583212 20.143221347124612 2010-Jan-13 01:43:41 LOG4 log_alfabeam: ALFABEAM 6 8.826873255680534 20.040463650984798 2010-Jan-13 01:43:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300039 2010-Jan-13 01:43:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:43:42 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-13 01:43:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:43:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:43:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 01:43:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20623.00 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:43:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:43:53 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-13 01:43:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:43:53 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-13 01:43:53 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Jan-13 01:43:53 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:43:53 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 01:43:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:43:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:43:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:43:53 LOG2 antvel: Parameters to Doppler: Topocentric 20633 2010 13 0.0 2010-Jan-13 01:43:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:43:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 01:43:53 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 01:43:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:43:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:43:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:43:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Jan-13 01:43:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:43:53 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-13 01:43:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:43:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.787937 2010.0357895720842 18.999933 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333291 20.074999999999992 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 1 8.831260489277399 19.973032189499886 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 2 8.837691153958572 20.005984305438474 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 3 8.839994729673101 20.107078523504192 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 4 8.835277178070136 20.177643368555916 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 5 8.828643049627296 20.141701951513873 2010-Jan-13 01:43:53 LOG4 log_alfabeam: ALFABEAM 6 8.826933006323705 20.038349703390846 2010-Jan-13 01:43:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300040 2010-Jan-13 01:43:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:43:54 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-13 01:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:43:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:43:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:43:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 01:43:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20635.00 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:44:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:44:05 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-13 01:44:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:44:05 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-13 01:44:05 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Jan-13 01:44:05 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:44:05 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 01:44:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:44:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:44:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:44:05 LOG2 antvel: Parameters to Doppler: Topocentric 20645 2010 13 0.0 2010-Jan-13 01:44:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:44:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 01:44:05 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 01:44:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:44:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:44:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:44:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Jan-13 01:44:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:44:05 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-13 01:44:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:44:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.791279 2010.0357899523412 18.999933 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333201 20.075000000000010 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 1 8.831430749035778 19.972375994197517 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 2 8.837803576236741 20.007438059753913 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 3 8.839940631496674 20.109256170846479 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 4 8.835104205998430 20.178263254284527 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 5 8.828531110086624 20.140113189958974 2010-Jan-13 01:44:05 LOG4 log_alfabeam: ALFABEAM 6 8.826997543166621 20.036213196678574 2010-Jan-13 01:44:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300041 2010-Jan-13 01:44:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:44:06 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-13 01:44:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:44:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:44:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 01:44:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20647.00 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:44:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:44:17 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-13 01:44:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:44:17 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-13 01:44:17 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Jan-13 01:44:17 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:44:17 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 01:44:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:44:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:44:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:44:17 LOG2 antvel: Parameters to Doppler: Topocentric 20657 2010 13 0.0 2010-Jan-13 01:44:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:44:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 01:44:17 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 01:44:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:44:17 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:44:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Jan-13 01:44:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:44:17 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-13 01:44:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:44:17 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.794622 2010.0357903325983 18.999933 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333297 20.075000000000003 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 1 8.831605686742044 19.971764127182961 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 2 8.837915928708416 20.008960405748031 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 3 8.839881623260540 20.111462009492847 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 4 8.834926623610384 20.178836313080392 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 5 8.828419717398356 20.138453479213702 2010-Jan-13 01:44:17 LOG4 log_alfabeam: ALFABEAM 6 8.827067053510831 20.034056371212802 2010-Jan-13 01:44:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300042 2010-Jan-13 01:44:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:44:18 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-13 01:44:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:44:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:44:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 01:44:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20659.00 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:44:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:44:29 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-13 01:44:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:44:29 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-13 01:44:29 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Jan-13 01:44:29 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:44:29 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 01:44:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:44:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:44:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:44:29 LOG2 antvel: Parameters to Doppler: Topocentric 20669 2010 13 0.0 2010-Jan-13 01:44:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:44:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 01:44:29 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 01:44:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:44:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:44:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:44:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Jan-13 01:44:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:44:29 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-13 01:44:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:44:29 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.797964 2010.0357907128553 18.999933 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333316 20.075000000000003 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 1 8.831785069798540 19.971201187871472 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 2 8.838027870372297 20.010551137815789 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 3 8.839817569312894 20.113691140158416 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 4 8.834744680315705 20.179357975587237 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 5 8.828309237568032 20.136723533595099 2010-Jan-13 01:44:29 LOG4 log_alfabeam: ALFABEAM 6 8.827141626875157 20.031884380901843 2010-Jan-13 01:44:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300043 2010-Jan-13 01:44:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:44:30 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-13 01:44:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:44:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:44:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 01:44:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20671.00 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:44:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:44:41 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-13 01:44:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:44:41 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-13 01:44:41 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Jan-13 01:44:41 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:44:41 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 01:44:41 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:44:41 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:44:41 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:44:41 LOG2 antvel: Parameters to Doppler: Topocentric 20681 2010 13 0.0 2010-Jan-13 01:44:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:44:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 01:44:41 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 01:44:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:44:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:44:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:44:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Jan-13 01:44:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:44:41 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-13 01:44:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:44:41 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.801307 2010.0357910931125 18.999933 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333311 20.075000000000003 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 1 8.831968843506941 19.970691078993486 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 2 8.838139177972804 20.012211573587170 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 3 8.839748277523578 20.115940934659680 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 4 8.834558445050533 20.179824342755438 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 5 8.828199918149764 20.134922429585455 2010-Jan-13 01:44:41 LOG4 log_alfabeam: ALFABEAM 6 8.827221418400230 20.029700126454298 2010-Jan-13 01:44:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300044 2010-Jan-13 01:44:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:44:42 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-13 01:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:44:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.79) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:44:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:44:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 559.1228 1.7920 RA/Dec = 08:50:00 +20:04:30 2010-Jan-13 01:44:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 01:44:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20683.00 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:44:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:44:53 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-13 01:44:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:44:53 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-13 01:44:53 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Jan-13 01:44:53 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:44:53 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 01:44:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:44:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:44:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:44:53 LOG2 antvel: Parameters to Doppler: Topocentric 20693 2010 13 0.0 2010-Jan-13 01:44:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:44:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 01:44:53 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 01:44:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:44:53 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:44:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:44:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Jan-13 01:44:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:44:53 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-13 01:44:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:44:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.804649 2010.0357914733695 18.999933 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333194 20.075000000000010 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 1 8.832156700587591 19.970238300186484 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 2 8.838249480213390 20.013940709640774 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 3 8.839673656222207 20.118205715070530 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 4 8.834368242690374 20.180230992764368 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 5 8.828092149948530 20.133051780925481 2010-Jan-13 01:44:53 LOG4 log_alfabeam: ALFABEAM 6 8.827306467067526 20.027509431126798 2010-Jan-13 01:44:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300045 2010-Jan-13 01:44:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:44:54 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-13 01:44:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:44:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:44:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:44:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 01:44:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20695.00 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:45:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:45:05 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-13 01:45:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:45:05 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-13 01:45:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-13 01:45:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 01:45:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 01:45:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:45:05 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-13 01:45:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:45:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 01:45:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:45:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:45:05 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-13 01:45:05 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Jan-13 01:45:05 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:45:05 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 01:45:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:45:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:45:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:45:05 LOG2 antvel: Parameters to Doppler: Topocentric 20705 2010 13 0.0 2010-Jan-13 01:45:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:45:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 01:45:05 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 01:45:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:45:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:45:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:45:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Jan-13 01:45:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:45:05 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-13 01:45:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:45:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.807992 2010.0357918536265 18.999933 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333201 20.074999999999996 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 1 8.832348519856495 19.969846680606743 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 2 8.838358525917538 20.015739161638407 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 3 8.839593551602357 20.120482148823911 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 4 8.834174209305631 20.180574145248272 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 5 8.827986203088624 20.131111459534768 2010-Jan-13 01:45:05 LOG4 log_alfabeam: ALFABEAM 6 8.827396883737968 20.025315794969188 2010-Jan-13 01:45:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300046 2010-Jan-13 01:45:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:45:06 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-13 01:45:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:45:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 01:45:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 01:45:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20707.00 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:45:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:45:17 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-13 01:45:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:45:17 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-13 01:45:17 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Jan-13 01:45:17 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:45:17 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 01:45:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:45:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:45:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:45:17 LOG2 antvel: Parameters to Doppler: Topocentric 20717 2010 13 0.0 2010-Jan-13 01:45:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:45:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 01:45:17 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 01:45:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:45:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:45:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:45:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Jan-13 01:45:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:45:17 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-13 01:45:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:45:17 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.811334 2010.0357922338835 18.999933 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333275 20.075000000000010 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 1 8.832543916587255 19.969520400930289 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 2 8.838465923096123 20.017604996136338 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 3 8.839507929834088 20.122763859204348 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 4 8.833976747162879 20.180849750664397 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 5 8.827882481309464 20.129104097247716 2010-Jan-13 01:45:17 LOG4 log_alfabeam: ALFABEAM 6 8.827492644628389 20.023125599575906 2010-Jan-13 01:45:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300047 2010-Jan-13 01:45:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:45:18 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-13 01:45:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:45:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 01:45:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 01:45:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20719.00 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:45:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:45:29 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-13 01:45:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:45:29 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-13 01:45:29 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Jan-13 01:45:29 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:45:29 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 01:45:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:45:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:45:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:45:29 LOG2 antvel: Parameters to Doppler: Topocentric 20729 2010 13 0.0 2010-Jan-13 01:45:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:45:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 01:45:29 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 01:45:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:45:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:45:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:45:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Jan-13 01:45:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:45:29 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-13 01:45:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:45:29 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.814677 2010.0357926141405 18.999933 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333250 20.075000000000010 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 1 8.832742701519948 19.969263002994236 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 2 8.838571402535973 20.019538008545780 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 3 8.839416688419762 20.125046899676821 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 4 8.833776060192738 20.181054365392249 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 5 8.827781265294753 20.127030463417181 2010-Jan-13 01:45:29 LOG4 log_alfabeam: ALFABEAM 6 8.827593805146398 20.020942825525964 2010-Jan-13 01:45:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300048 2010-Jan-13 01:45:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:45:30 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-13 01:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 01:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 01:45:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20731.00 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:45:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:45:41 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-13 01:45:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:45:41 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-13 01:45:41 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Jan-13 01:45:41 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:45:41 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 01:45:41 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:45:41 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:45:41 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:45:41 LOG2 antvel: Parameters to Doppler: Topocentric 20741 2010 13 0.0 2010-Jan-13 01:45:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:45:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 01:45:41 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 01:45:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:45:41 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:45:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:45:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Jan-13 01:45:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:45:41 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-13 01:45:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:45:41 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.818019 2010.0357929943978 18.999933 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333359 20.075000000000003 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 1 8.832944414585842 19.969078105718580 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 2 8.838674564660296 20.021535240134241 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 3 8.839319864111140 20.127324341416362 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 4 8.833572624921995 20.181184556973960 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 5 8.827682956534847 20.124894278643925 2010-Jan-13 01:45:41 LOG4 log_alfabeam: ALFABEAM 6 8.827700268453727 20.018774240467799 2010-Jan-13 01:45:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300049 2010-Jan-13 01:45:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:45:42 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-13 01:45:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:45:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 01:45:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 01:45:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20743.00 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:45:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:45:53 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-13 01:45:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:45:53 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-13 01:45:53 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Jan-13 01:45:53 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:45:53 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 01:45:53 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:45:53 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:45:53 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:45:53 LOG2 antvel: Parameters to Doppler: Topocentric 20753 2010 13 0.0 2010-Jan-13 01:45:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:45:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 01:45:53 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 01:45:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:45:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:45:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:45:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Jan-13 01:45:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:45:53 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-13 01:45:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:45:53 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.821361 2010.0357933746548 18.999933 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333316 20.075000000000003 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 1 8.833148740402773 19.968968755470730 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 2 8.838775105633029 20.023594964779310 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 3 8.839217448518921 20.129591102993373 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 4 8.833366770599676 20.181237444226849 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 5 8.827587859315109 20.122697924490126 2010-Jan-13 01:45:53 LOG4 log_alfabeam: ALFABEAM 6 8.827811991548668 20.016624768938211 2010-Jan-13 01:45:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300050 2010-Jan-13 01:45:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:45:54 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-13 01:45:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:45:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 01:45:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:45:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 01:45:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20755.00 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:46:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:46:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:46:05 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-13 01:46:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:46:05 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-13 01:46:05 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Jan-13 01:46:05 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:46:05 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 01:46:05 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:46:05 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:46:05 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:46:05 LOG2 antvel: Parameters to Doppler: Topocentric 20765 2010 13 0.0 2010-Jan-13 01:46:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:46:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 01:46:05 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 01:46:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:46:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:46:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:46:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Jan-13 01:46:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:46:05 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-13 01:46:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:46:05 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.824704 2010.0357937549118 18.999933 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333297 20.075000000000003 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 1 8.833355335891151 19.968937701011427 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 2 8.838872723246256 20.025715035417328 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 3 8.839109464489390 20.131841944586061 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 4 8.833158853274357 20.181210466100254 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 5 8.827496271490997 20.120444216807332 2010-Jan-13 01:46:05 LOG4 log_alfabeam: ALFABEAM 6 8.827928900366839 20.014499417178108 2010-Jan-13 01:46:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300051 2010-Jan-13 01:46:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:46:06 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-13 01:46:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:46:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 01:46:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:46:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 01:46:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20767.00 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:46:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.71) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:46:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 547.9489 1.7081 RA/Dec = 08:50:00 +20:04:30 2010-Jan-13 01:46:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:46:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:46:17 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-13 01:46:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:46:17 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-13 01:46:17 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Jan-13 01:46:17 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:46:17 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 01:46:17 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:46:17 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:46:17 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:46:17 LOG2 antvel: Parameters to Doppler: Topocentric 20777 2010 13 0.0 2010-Jan-13 01:46:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:46:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 01:46:17 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 01:46:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:46:17 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:46:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:46:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Jan-13 01:46:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 01:46:17 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-13 01:46:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:46:17 LOG5 log_alfabeam: Parameters: 8.8333333333333339 20.074999999999999 8.828046 2010.0357941351688 18.999933 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 0 8.833333333333378 20.075000000000010 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 1 8.833563644597682 19.968987265898946 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 2 8.838967037084345 20.027890903773997 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 3 8.838996071946463 20.134069526366229 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 4 8.832949442124667 20.181101561840322 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 5 8.827408557914694 20.118138492338268 2010-Jan-13 01:46:17 LOG4 log_alfabeam: ALFABEAM 6 8.828050777243735 20.012405090357198 2010-Jan-13 01:46:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300052 2010-Jan-13 01:46:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 01:46:18 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-Jan-13 01:46:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:46:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 01:46:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:46:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 01:46:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20779.00 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:46:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:46:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 01:46:29 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 01:46:29 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 INFO2 smartfreq: Switching off CAL 2010-Jan-13 01:46:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:46:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:46:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:46:29 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:46:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:46:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:46:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:46:29 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-13 01:46:29 LOG5 antvel: Calling 'antvel 85000.000000 200430.000000 J Topocentric 0' 2010-Jan-13 01:46:29 LOG2 antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03579 J 2010-Jan-13 01:46:29 LOG2 antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:46:29 LOG2 antvel: Parameters to Doppler: Topocentric 20789 2010 13 0.0 2010-Jan-13 01:46:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:46:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Jan-13 01:46:29 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Jan-13 01:46:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:46:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:46:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:46:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:29 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-13 01:46:29 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Jan-13 01:46:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:46:29 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Jan-13 01:46:29 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-13 01:46:29 NOTE run_command_file: DONE with command file processing 2010-Jan-13 01:46:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-13 01:46:30 STOP finish_task: Finishing task 'running command file 'command_galfasrc10.cmd'' 2010-Jan-13 01:46:30 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-13 01:46:30 DONE finish_task: DONE finished running: command file 'command_galfasrc10.cmd' 2010-Jan-13 01:46:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:46:30 END end_task: Finishing task 'running command file 'command_galfasrc10.cmd'' with status 'OK' 2010-Jan-13 01:46:30 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-13 01:46:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:46:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:46:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-13 01:46:46 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-13 01:46:46 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-13 01:46:46 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-13 01:46:46 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-13 01:46:46 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-13 01:46:46 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-13 01:46:46 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-13 01:46:46 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-13 01:46:46 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-13 01:46:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-13 01:46:46 LOG3 exec_msg: Closing socket 2010-Jan-13 01:46:46 LOG3 exec_msg: Closing socket 2010-Jan-13 01:46:46 LOG3 exec_msg: Closing socket 2010-Jan-13 01:46:46 LOG3 exec_msg: Closing socket 2010-Jan-13 01:46:49 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-13 01:46:49 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-13 01:46:49 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-13 01:46:49 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-13 01:47:09 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Jan-13 01:47:09 LOG2 CIMA-antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03580 J 2010-Jan-13 01:47:09 LOG2 CIMA-antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 01:47:09 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 20829 2010 13 0.0 2010-Jan-13 01:47:09 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-13 01:47:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 01:47:11 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Jan-13 01:47:11 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Jan-13 01:47:11 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-13 01:47:11 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-13 01:47:11 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-13 01:47:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-13 01:47:11 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-13 01:47:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:47:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:47:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:47:11 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-13 01:47:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:47:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:47:11 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-13 01:47:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:47:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:47:11 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-13 01:47:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-13 01:47:11 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-13 01:47:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-13 01:47:11 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-13 01:47:11 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-13 01:47:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-13 01:47:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:11 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-13 01:47:11 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-13 01:47:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:47:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 01:47:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:47:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:12 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-13 01:47:12 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-13 01:47:12 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-13 01:47:12 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-13 01:47:12 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-13 01:47:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:47:12 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-13 01:47:12 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-13 01:47:12 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Jan-13 01:47:12 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Jan-13 01:47:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-13 01:47:12 LOG5 begin_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-13 01:47:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-13 01:47:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-13 01:47:12 START begin_task: Starting task 'selecting calibration port' 2010-Jan-13 01:47:12 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-13 01:47:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-13 01:47:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:12 START begin_task: Starting task 'waiting on calport' 2010-Jan-13 01:47:12 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-13 01:47:12 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Jan-13 01:47:12 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-13 01:47:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:47:13 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-13 01:47:13 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-13 01:47:13 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-13 01:47:13 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:47:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:47:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:47:13 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:47:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:47:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:47:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:47:13 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:47:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:47:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-13 01:47:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-13 01:47:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:47:13 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-13 01:47:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:47:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-13 01:47:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:47:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:47:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:47:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:47:13 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-13 01:47:13 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-13 01:47:13 LOG5 finish_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-13 01:47:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:47:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-13 01:47:13 LOG5 end_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-13 01:47:13 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Jan-13 01:47:13 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Jan-13 01:47:13 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:47:13 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-13 01:47:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-13 01:47:13 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-13 01:47:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-13 01:47:14 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:47:14 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-13 01:47:14 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-13 01:47:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:47:14 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-13 01:47:14 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-13 01:47:14 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Jan-13 01:47:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-13 01:47:14 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-13 01:47:33 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Jan-13 01:47:33 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Jan-13 01:47:33 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:47:33 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-13 01:47:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-13 01:47:33 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-13 01:47:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-13 01:47:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-13 01:47:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:33 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-13 01:47:33 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-13 01:47:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-13 01:47:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:47:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-13 01:47:36 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-13 01:47:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-13 01:47:36 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:47:36 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-13 01:47:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-13 01:47:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:47:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:47:37 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:47:37 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:47:37 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-13 01:47:37 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Jan-13 01:47:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-13 01:47:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-13 01:47:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-13 01:47:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 1 3 dB --- beam 3: 4 3 dB 2010-Jan-13 01:47:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-Jan-13 01:47:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-13 01:47:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-13 01:47:37 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Jan-13 01:47:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.885 1.032 ALFA beam 1: 1.037 1.070 2010-Jan-13 01:47:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.101 0.956 ALFA beam 3: 0.961 1.041 2010-Jan-13 01:47:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.956 0.908 ALFA beam 5: 0.961 1.022 2010-Jan-13 01:47:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.953 1.035 ALFA beam 7: 1.036 0.976 2010-Jan-13 01:47:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:47:37 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-13 01:47:37 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Jan-13 01:47:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:47:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:47:37 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-13 01:47:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Jan-13 01:47:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:47:37 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-13 01:47:37 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-13 01:47:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 01:47:37 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:47:37 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Jan-13 01:47:40 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift83p1 085100.0 +200430 J 0 Topocentric velocity(optical) 2010-Jan-13 01:47:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift83p1 085100.0 +200430 J 0 Topocentric velocity(optical)' 2010-Jan-13 01:47:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-13 01:47:40 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2010-Jan-13 01:47:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-13 01:47:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift83p1} 2010-Jan-13 01:47:40 INFO5 fixed_driftmap: Start: year = 2010.035796733592 RA = 08:51:37.0 Dec = +20:02:05.1 2010-Jan-13 01:47:40 NOTE fixed_driftmap: Setting ZA to 1:40:51.4 ... 2010-Jan-13 01:47:40 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 1.68 2010-Jan-13 01:47:40 LOG3 track_source: Calling 'track_source drift83p1 180.0 1.6809450406 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Jan-13 01:47:40 START begin_task: Starting task 'sending tracking commands' 2010-Jan-13 01:47:40 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift83p1} INFO {Slewing to source 'drift83p1' ...} 2010-Jan-13 01:47:40 INFO1 track_source: Starting to track drift83p1 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift83p1" 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: set dec 1.6809450406 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: pnt tr 180.0 1.6809450406 -CF 2010-Jan-13 01:47:40 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-13 01:47:40 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-13 01:47:40 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-13 01:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:47:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-13 01:47:40 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:47:40 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-13 01:47:40 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-13 01:47:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Jan-13 01:47:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-13 01:47:40 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-13 01:47:40 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift83p1" 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: set dec 1.6809450406 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 1.6809450406 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 1.6809450406 -CF 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-13 01:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:47:41 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-13 01:47:41 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-13 01:47:41 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-13 01:47:41 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-13 01:47:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-13 01:47:41 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-13 01:47:41 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-13 01:47:41 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-13 01:47:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:47:41 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-13 01:47:41 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-13 01:47:41 START begin_task: Starting task 'waiting on telescope' 2010-Jan-13 01:47:41 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-13 01:47:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-13 01:47:41 LOG3 waittrk: Start waittrk 5 2010-Jan-13 01:47:41 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-13 01:47:41 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-13 01:47:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:47:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 535.9977 1.6938 RA/Dec = 08:50:00 +20:04:30 2010-Jan-13 01:47:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-13 01:47:46 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-13 01:47:46 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-13 01:47:46 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-13 01:48:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-13 01:48:04 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-13 01:48:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-13 01:48:05 INFO2 waittrk: Now tracking drift83p1 2010-Jan-13 01:48:05 LOG4 waittrk: Current telescope position: Az = 539.91 ZA = 1.69 2010-Jan-13 01:48:05 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-13 01:48:05 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-13 01:48:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:48:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-13 01:48:05 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 01:48:05 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 01:48:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 01:48:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:48:05 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 01:48:05 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 01:48:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:48:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 01:48:05 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 01:48:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:48:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 01:48:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:48:05 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-13 01:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:48:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:48:06 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:48:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 01:48:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:48:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:48:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:48:06 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:48:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:48:06 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:48:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:48:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 01:48:06 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG5 dopset_later: Calling 'dopset_later 7.7418445136199745' 2010-Jan-13 01:48:06 INFO3 dopset_later: Setting Doppler correction for 01:48:13 (7.7 seconds from now) 2010-Jan-13 01:48:06 LOG5 antvel: Calling 'antvel 180.000000 1.680945 F Topocentric 7.7418445136199745' 2010-Jan-13 01:48:06 LOG2 antvel: Transforming current Az = 180.00 ZA = 1.68 to apparent RA = 08:51:37.0 Dec = +20:02:05.1 2010-Jan-13 01:48:06 LOG2 antvel: Parameters to Doppler: Topocentric 20893 2010 13 0.0 2010-Jan-13 01:48:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 01:48:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Jan-13 01:48:06 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Jan-13 01:48:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 01:48:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 01:48:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:48:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:48:06 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:48:06 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-13 01:48:06 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-13 01:48:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-13 01:48:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-13 01:48:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:48:06 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-13 01:48:06 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:48:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-13 01:48:09 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-13 01:48:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-13 01:48:09 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 01:48:09 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-13 01:48:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-13 01:48:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:48:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:48:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:48:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 01:48:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-13 01:48:09 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-13 01:48:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-13 01:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:48:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-13 01:48:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-13 01:48:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 1 3 dB --- beam 3: 4 3 dB 2010-Jan-13 01:48:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-Jan-13 01:48:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-13 01:48:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-13 01:48:09 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-13 01:48:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.904 1.029 ALFA beam 1: 1.038 1.070 2010-Jan-13 01:48:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.123 0.973 ALFA beam 3: 0.965 1.063 2010-Jan-13 01:48:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.972 0.934 ALFA beam 5: 0.959 1.026 2010-Jan-13 01:48:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.976 1.061 ALFA beam 7: 1.052 0.997 2010-Jan-13 01:48:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:48:10 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-13 01:48:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-13 01:48:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:48:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:48:10 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-13 01:48:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 01:48:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 01:48:10 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-13 01:48:10 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-13 01:48:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:48:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 01:48:10 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-13 01:48:10 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 08:51:37.0 LST = 08:51:33.3 diff = 3.8 secs 2010-Jan-13 01:48:10 INFO2 fixed_driftmap: Waiting 1.8 seconds for RA 8:51:37 2010-Jan-13 01:48:10 INFO2 lstwait: Waiting for 1.7 secs from LST 08:51:33 to LST 08:51:35 ... 2010-Jan-13 01:48:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1.7478553097818414 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-13 01:48:10 START begin_task: Starting task 'waiting on wait on LST' 2010-Jan-13 01:48:10 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-13 01:48:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Jan-13 01:48:12 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-13 01:48:12 LOG4 lstwait: Finished waiting 0.25 seconds late 2010-Jan-13 01:48:12 INFO3 lstwait: Finished waiting 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-13 01:48:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:48:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:48:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:48:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:48:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 01:48:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 01:48:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 01:48:12 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 01:48:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 01:48:12 INFO2 take_data: Starting WAPP 600-second scan: 1300053 2010-Jan-13 01:48:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 01:48:12 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-13 01:48:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:48:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 01:48:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20893.00 2010-Jan-13 01:48:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0001.fits 2010-Jan-13 01:48:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0001.fits} 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:49:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:49:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6905 RA/Dec = 08:52:00 +20:04:31 2010-Jan-13 01:50:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:50:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8938 1.6905 RA/Dec = 08:53:30 +20:04:32 2010-Jan-13 01:52:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:52:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8941 1.6905 RA/Dec = 08:55:00 +20:04:33 2010-Jan-13 01:53:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:53:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8941 1.6905 RA/Dec = 08:56:30 +20:04:34 2010-Jan-13 01:55:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:55:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8940 1.6905 RA/Dec = 08:58:01 +20:04:35 2010-Jan-13 01:56:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:56:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8941 1.6905 RA/Dec = 08:59:31 +20:04:36 2010-Jan-13 01:58:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:58:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8940 1.6905 RA/Dec = 09:01:01 +20:04:37 2010-Jan-13 01:58:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:58:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 01:58:13 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-13 01:58:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 01:58:13 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-13 01:58:13 LOG1 fixed_driftmap: New position: year = 2010.0358168238397 RA = 09:01:03.2 RA/Dec = 09:01:40.0 +20:01:58.2 2010-Jan-13 01:58:13 NOTE fixed_driftmap: Correcting ZA to 1:40:44.5 ... 2010-Jan-13 01:58:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6790215332 -CF 2010-Jan-13 01:58:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 01:58:13 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 01:58:13 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-13 01:58:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 01:58:13 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 01:58:13 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-13 01:58:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 01:58:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 01:58:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:58:13 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 01:58:13 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-13 01:58:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6790215332 -CF 2010-Jan-13 01:58:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:58:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 01:58:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 01:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:58:14 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 01:58:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 01:58:14 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 01:58:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:58:14 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 01:58:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:58:14 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 01:58:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:58:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:58:14 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:58:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 01:58:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 01:58:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:58:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 01:58:14 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 01:58:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 01:58:14 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 01:58:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 01:58:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 01:58:14 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 01:58:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 01:58:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 01:58:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:58:14 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:58:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 01:58:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:58:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:58:14 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 01:58:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 01:58:14 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-13 01:58:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 01:58:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 01:58:14 INFO2 take_data: Starting WAPP 1-second scan: 1300054 2010-Jan-13 01:58:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 01:58:15 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-13 01:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:58:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 01:58:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21496.00 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:58:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 01:58:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 01:58:17 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 01:58:17 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 01:58:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 01:58:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 01:58:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 01:58:17 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 01:58:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 01:58:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 01:58:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 01:58:17 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 01:58:17 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 01:58:17 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 01:58:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 01:58:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 01:58:17 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-13 01:58:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Jan-13 01:58:18 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-13 01:58:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 01:58:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 01:58:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 01:58:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 01:58:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 01:58:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 01:58:18 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 01:58:18 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-13 01:58:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 01:58:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 01:58:18 INFO2 take_data: Starting WAPP 600-second scan: 1300055 2010-Jan-13 01:58:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 01:58:18 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-13 01:58:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 01:58:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 01:58:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 01:58:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21499.00 2010-Jan-13 01:58:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0002.fits 2010-Jan-13 01:58:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0002.fits} 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 01:59:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 01:59:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6886 RA/Dec = 09:02:31 +20:04:31 2010-Jan-13 02:01:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:01:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6886 RA/Dec = 09:04:02 +20:04:32 2010-Jan-13 02:02:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:02:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6886 RA/Dec = 09:05:32 +20:04:33 2010-Jan-13 02:04:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:04:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6886 RA/Dec = 09:07:02 +20:04:34 2010-Jan-13 02:05:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:05:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6886 RA/Dec = 09:08:33 +20:04:35 2010-Jan-13 02:07:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:07:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6886 RA/Dec = 09:10:03 +20:04:36 2010-Jan-13 02:08:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:08:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:08:19 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:08:19 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 LOG1 fixed_driftmap: New position: year = 2010.035836026821 RA = 09:11:11.0 RA/Dec = 09:11:47.7 +20:01:51.5 2010-Jan-13 02:08:19 NOTE fixed_driftmap: Correcting ZA to 1:40:37.8 ... 2010-Jan-13 02:08:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6771634708 -CF 2010-Jan-13 02:08:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:08:19 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:08:19 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:08:19 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:08:19 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:08:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:08:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:08:19 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:08:19 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6771634708 -CF 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:08:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:08:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:08:19 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-13 02:08:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:08:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:08:20 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:08:20 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:08:20 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:08:20 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:08:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:08:20 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:08:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:08:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:08:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:08:20 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:08:20 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:08:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:08:20 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:08:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:08:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:08:20 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:08:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:08:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:08:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:08:20 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:08:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:08:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:08:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:08:20 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:08:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:08:20 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:08:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:08:20 INFO2 take_data: Starting WAPP 1-second scan: 1300056 2010-Jan-13 02:08:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:08:20 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-13 02:08:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:08:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:08:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22101.00 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:08:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:08:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:08:22 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:08:22 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:08:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:08:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:08:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:08:22 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:08:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:08:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:08:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:08:22 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:08:22 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:08:22 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:08:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:08:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:08:22 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-13 02:08:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Jan-13 02:08:22 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Jan-13 02:08:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:08:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:08:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:08:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:08:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:08:23 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:08:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:08:23 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Jan-13 02:08:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:08:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:08:23 INFO2 take_data: Starting WAPP 600-second scan: 1300057 2010-Jan-13 02:08:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:08:23 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-13 02:08:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:08:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:08:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:08:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22104.00 2010-Jan-13 02:08:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0003.fits 2010-Jan-13 02:08:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0003.fits} 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:08:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:08:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:08:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6868 RA/Dec = 09:11:33 +20:04:31 2010-Jan-13 02:10:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:10:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6868 RA/Dec = 09:13:03 +20:04:31 2010-Jan-13 02:11:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:11:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6868 RA/Dec = 09:14:34 +20:04:32 2010-Jan-13 02:13:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:13:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6868 RA/Dec = 09:16:04 +20:04:33 2010-Jan-13 02:14:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:14:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6868 RA/Dec = 09:17:34 +20:04:34 2010-Jan-13 02:16:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:16:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8943 1.6868 RA/Dec = 09:19:04 +20:04:35 2010-Jan-13 02:17:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:17:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6868 RA/Dec = 09:20:35 +20:04:36 2010-Jan-13 02:18:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:18:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:18:24 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:18:24 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG1 fixed_driftmap: New position: year = 2010.0358551981139 RA = 09:21:17.9 RA/Dec = 09:21:54.3 +20:01:45.1 2010-Jan-13 02:18:24 NOTE fixed_driftmap: Correcting ZA to 1:40:31.4 ... 2010-Jan-13 02:18:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6753925278 -CF 2010-Jan-13 02:18:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:18:24 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:18:24 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:18:24 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:18:24 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:18:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:18:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:18:24 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:18:24 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6753925278 -CF 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:18:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:18:24 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:18:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:18:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:18:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:18:24 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-Jan-13 02:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:18:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:18:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:18:25 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:18:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:18:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:18:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:18:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:18:25 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:18:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:18:25 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:18:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:18:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:18:25 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:18:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:18:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:18:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:18:25 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:18:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:18:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:18:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:18:25 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:18:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:18:25 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:18:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:18:25 INFO2 take_data: Starting WAPP 1-second scan: 1300058 2010-Jan-13 02:18:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:18:25 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-13 02:18:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:18:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:18:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22706.00 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:18:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:18:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:18:27 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:18:27 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:18:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:18:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:18:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:18:27 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:18:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:18:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:18:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:18:27 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:18:27 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:18:27 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:18:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:18:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:18:27 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-13 02:18:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Jan-13 02:18:27 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Jan-13 02:18:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:18:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:18:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:18:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:18:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:18:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:18:28 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:18:28 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Jan-13 02:18:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:18:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:18:28 INFO2 take_data: Starting WAPP 600-second scan: 1300059 2010-Jan-13 02:18:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:18:28 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-13 02:18:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:18:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:18:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:18:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22709.00 2010-Jan-13 02:18:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0004.fits 2010-Jan-13 02:18:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0004.fits} 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:18:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:19:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:19:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6850 RA/Dec = 09:22:05 +20:04:31 2010-Jan-13 02:20:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:20:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6850 RA/Dec = 09:23:35 +20:04:32 2010-Jan-13 02:22:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:22:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8944 1.6850 RA/Dec = 09:25:06 +20:04:33 2010-Jan-13 02:23:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:23:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6850 RA/Dec = 09:26:36 +20:04:33 2010-Jan-13 02:25:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:25:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6851 RA/Dec = 09:28:06 +20:04:34 2010-Jan-13 02:26:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:26:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8945 1.6850 RA/Dec = 09:29:36 +20:04:35 2010-Jan-13 02:28:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.69) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:28:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6850 RA/Dec = 09:31:07 +20:04:36 2010-Jan-13 02:28:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:28:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:28:29 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:28:29 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 LOG1 fixed_driftmap: New position: year = 2010.0358743694071 RA = 09:31:24.7 RA/Dec = 09:32:01.0 +20:01:39.1 2010-Jan-13 02:28:29 NOTE fixed_driftmap: Correcting ZA to 1:40:25.4 ... 2010-Jan-13 02:28:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6737090452 -CF 2010-Jan-13 02:28:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:28:29 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:28:29 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:28:29 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:28:29 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:28:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:28:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:28:29 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:28:29 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6737090452 -CF 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:28:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:28:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:28:29 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-13 02:28:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:28:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:28:29 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:28:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:28:29 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:28:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:28:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:28:30 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:28:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:28:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:28:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:28:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:28:30 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:28:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:28:30 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:28:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:28:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:28:30 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:28:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:28:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:28:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:28:30 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:28:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:28:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:28:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:28:30 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:28:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:28:30 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:28:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:28:30 INFO2 take_data: Starting WAPP 1-second scan: 1300060 2010-Jan-13 02:28:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:28:30 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-13 02:28:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:28:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23311.00 2010-Jan-13 02:28:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:28:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:28:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:28:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:28:32 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:28:32 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:28:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:28:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:28:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:28:32 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:28:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:28:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:28:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:28:32 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:28:32 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:28:32 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:28:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:28:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:28:32 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-13 02:28:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Jan-13 02:28:32 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Jan-13 02:28:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:28:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:28:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:28:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:28:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:28:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:28:33 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:28:33 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-13 02:28:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:28:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:28:33 INFO2 take_data: Starting WAPP 600-second scan: 1300061 2010-Jan-13 02:28:33 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:28:33 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-13 02:28:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:28:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:28:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:28:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23314.00 2010-Jan-13 02:28:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0005.fits 2010-Jan-13 02:28:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0005.fits} 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:29:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:29:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6833 RA/Dec = 09:32:37 +20:04:31 2010-Jan-13 02:31:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:31:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6833 RA/Dec = 09:34:07 +20:04:32 2010-Jan-13 02:32:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:32:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6833 RA/Dec = 09:35:38 +20:04:33 2010-Jan-13 02:34:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:34:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6833 RA/Dec = 09:37:08 +20:04:34 2010-Jan-13 02:35:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:35:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6833 RA/Dec = 09:38:39 +20:04:34 2010-Jan-13 02:37:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:37:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6833 RA/Dec = 09:40:09 +20:04:35 2010-Jan-13 02:38:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:38:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:38:34 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:38:34 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG1 fixed_driftmap: New position: year = 2010.0358935407003 RA = 09:41:31.6 RA/Dec = 09:42:07.6 +20:01:33.3 2010-Jan-13 02:38:34 NOTE fixed_driftmap: Correcting ZA to 1:40:19.6 ... 2010-Jan-13 02:38:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6721162793 -CF 2010-Jan-13 02:38:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:38:34 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:38:34 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:38:34 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:38:34 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:38:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:38:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:38:34 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:38:34 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6721162793 -CF 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:38:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:38:34 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:38:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:38:34 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:38:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:38:34 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Jan-13 02:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:38:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:38:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:38:35 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:38:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:38:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:38:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:38:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:38:35 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:38:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:38:35 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:38:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:38:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:38:35 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:38:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:38:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:38:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:38:35 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:38:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:38:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:38:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:38:35 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:38:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:38:35 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:38:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:38:35 INFO2 take_data: Starting WAPP 1-second scan: 1300062 2010-Jan-13 02:38:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:38:35 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-13 02:38:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:38:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:38:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23916.00 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:38:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:38:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:38:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:38:37 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:38:37 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:38:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:38:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:38:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:38:37 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:38:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:38:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:38:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:38:37 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:38:37 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:38:37 LOG5 finish_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:38:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:38:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:38:37 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-13 02:38:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Jan-13 02:38:37 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Jan-13 02:38:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:38:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:38:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:38:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:38:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:38:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:38:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:38:38 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2010-Jan-13 02:38:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:38:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:38:38 INFO2 take_data: Starting WAPP 600-second scan: 1300063 2010-Jan-13 02:38:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:38:38 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Jan-13 02:38:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:38:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:38:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:38:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0006.fits 2010-Jan-13 02:38:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23919.00 2010-Jan-13 02:38:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0006.fits} 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:38:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:38:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:38:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6817 RA/Dec = 09:41:40 +20:04:30 2010-Jan-13 02:40:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:40:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6817 RA/Dec = 09:43:10 +20:04:31 2010-Jan-13 02:41:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:41:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6817 RA/Dec = 09:44:40 +20:04:32 2010-Jan-13 02:43:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:43:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6817 RA/Dec = 09:46:10 +20:04:33 2010-Jan-13 02:44:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:44:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6816 RA/Dec = 09:47:41 +20:04:34 2010-Jan-13 02:46:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:46:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6817 RA/Dec = 09:49:11 +20:04:34 2010-Jan-13 02:47:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:47:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8947 1.6817 RA/Dec = 09:50:41 +20:04:35 2010-Jan-13 02:48:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:48:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:48:39 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:48:39 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG1 fixed_driftmap: New position: year = 2010.0359127119934 RA = 09:51:38.5 RA/Dec = 09:52:14.3 +20:01:27.9 2010-Jan-13 02:48:39 NOTE fixed_driftmap: Correcting ZA to 1:40:14.2 ... 2010-Jan-13 02:48:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6706173319 -CF 2010-Jan-13 02:48:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:48:39 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:48:39 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:48:39 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:48:39 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:48:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:48:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:48:39 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:48:39 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6706173319 -CF 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:48:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:48:39 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:48:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:48:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:48:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:48:39 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-13 02:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:48:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:48:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:48:40 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:48:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:48:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:48:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:48:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:48:40 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:48:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:48:40 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:48:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:48:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:48:40 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:48:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:48:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:48:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:48:40 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:48:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:48:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:48:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:48:40 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:48:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:48:40 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:48:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:48:40 INFO2 take_data: Starting WAPP 1-second scan: 1300064 2010-Jan-13 02:48:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:48:40 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-13 02:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:48:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:48:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24521.00 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:48:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:48:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:48:42 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:48:42 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:48:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:48:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:48:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:48:42 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:48:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:48:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:48:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:48:42 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:48:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:48:42 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:48:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:48:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:48:42 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-13 02:48:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Jan-13 02:48:42 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Jan-13 02:48:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:48:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:48:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:48:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:48:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:48:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:48:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:48:43 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-13 02:48:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:48:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:48:43 INFO2 take_data: Starting WAPP 600-second scan: 1300065 2010-Jan-13 02:48:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:48:43 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-13 02:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:48:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:48:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24524.00 2010-Jan-13 02:48:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0007.fits 2010-Jan-13 02:48:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0007.fits} 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:49:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:49:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6802 RA/Dec = 09:52:12 +20:04:31 2010-Jan-13 02:50:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:50:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6802 RA/Dec = 09:53:42 +20:04:31 2010-Jan-13 02:52:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:52:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6802 RA/Dec = 09:55:12 +20:04:32 2010-Jan-13 02:53:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:53:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6802 RA/Dec = 09:56:42 +20:04:33 2010-Jan-13 02:55:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:55:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6802 RA/Dec = 09:58:13 +20:04:34 2010-Jan-13 02:56:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:56:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6802 RA/Dec = 09:59:43 +20:04:34 2010-Jan-13 02:58:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:58:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8948 1.6802 RA/Dec = 10:01:13 +20:04:35 2010-Jan-13 02:58:17 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55209.290451 to 55209.290463! 2010-Jan-13 02:58:18 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55209.290451 - 55209.290475)! 2010-Jan-13 02:58:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:58:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:58:44 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:58:44 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG1 fixed_driftmap: New position: year = 2010.0359318832866 RA = 10:01:45.4 RA/Dec = 10:02:21.0 +20:01:22.9 2010-Jan-13 02:58:44 NOTE fixed_driftmap: Correcting ZA to 1:40:09.2 ... 2010-Jan-13 02:58:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6692151383 -CF 2010-Jan-13 02:58:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 02:58:44 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 02:58:44 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 02:58:44 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 02:58:44 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 02:58:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 02:58:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:58:44 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 02:58:44 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6692151383 -CF 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 02:58:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 02:58:44 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 02:58:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:58:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 02:58:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:58:44 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-13 02:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 02:58:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:58:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:58:45 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:58:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 02:58:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 02:58:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:58:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 02:58:45 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 02:58:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 02:58:45 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 02:58:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 02:58:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 02:58:45 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 02:58:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 02:58:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 02:58:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:58:45 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:58:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 02:58:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:58:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:58:45 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 02:58:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:58:45 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 02:58:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:58:45 INFO2 take_data: Starting WAPP 1-second scan: 1300066 2010-Jan-13 02:58:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:58:45 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-13 02:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:58:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 02:58:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25126.00 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:58:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:58:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 02:58:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 02:58:47 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 02:58:47 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 02:58:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 02:58:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 02:58:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 02:58:47 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 02:58:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 02:58:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 02:58:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 02:58:47 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 02:58:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 02:58:47 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 02:58:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 02:58:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 02:58:47 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-13 02:58:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Jan-13 02:58:47 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Jan-13 02:58:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 02:58:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 02:58:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 02:58:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 02:58:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 02:58:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 02:58:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 02:58:48 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-13 02:58:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 02:58:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 02:58:48 INFO2 take_data: Starting WAPP 600-second scan: 1300067 2010-Jan-13 02:58:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 02:58:48 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-13 02:58:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 02:58:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 02:58:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 02:58:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25129.00 2010-Jan-13 02:58:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0008.fits 2010-Jan-13 02:58:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0008.fits} 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:58:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 02:59:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 02:59:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6788 RA/Dec = 10:02:44 +20:04:31 2010-Jan-13 03:01:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:01:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6788 RA/Dec = 10:04:14 +20:04:31 2010-Jan-13 03:02:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:02:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6788 RA/Dec = 10:05:44 +20:04:32 2010-Jan-13 03:04:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:04:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6788 RA/Dec = 10:07:14 +20:04:33 2010-Jan-13 03:05:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:05:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6788 RA/Dec = 10:08:45 +20:04:34 2010-Jan-13 03:07:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:07:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6788 RA/Dec = 10:10:15 +20:04:34 2010-Jan-13 03:08:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:08:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6788 RA/Dec = 10:11:45 +20:04:35 2010-Jan-13 03:08:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:08:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:08:49 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:08:49 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG1 fixed_driftmap: New position: year = 2010.0359510545798 RA = 10:11:52.2 RA/Dec = 10:12:27.6 +20:01:18.2 2010-Jan-13 03:08:49 NOTE fixed_driftmap: Correcting ZA to 1:40:04.5 ... 2010-Jan-13 03:08:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6679124189 -CF 2010-Jan-13 03:08:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:08:49 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:08:49 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:08:49 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:08:49 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:08:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:08:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:08:49 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:08:49 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6679124189 -CF 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:08:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:08:49 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:08:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:08:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:08:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:08:49 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-13 03:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:08:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:08:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:08:50 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:08:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:08:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:08:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:08:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:08:50 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:08:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:08:50 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:08:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:08:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:08:50 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:08:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:08:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:08:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:08:50 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:08:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:08:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:08:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:08:50 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:08:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:08:50 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:08:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:08:50 INFO2 take_data: Starting WAPP 1-second scan: 1300068 2010-Jan-13 03:08:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:08:50 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-13 03:08:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:08:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:08:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25731.00 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:08:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:08:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:08:52 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-13 03:08:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:08:52 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Jan-13 03:08:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:08:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:08:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:08:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:08:52 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:08:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:08:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:08:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:08:53 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:08:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:08:53 LOG5 finish_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:08:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:08:53 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Jan-13 03:08:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:08:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:08:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:08:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:08:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:08:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:08:53 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:08:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:08:53 INFO2 take_data: Starting WAPP 600-second scan: 1300069 2010-Jan-13 03:08:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:08:53 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-13 03:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:08:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25734.00 2010-Jan-13 03:08:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0009.fits 2010-Jan-13 03:08:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0009.fits} 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:10:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:10:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6775 RA/Dec = 10:13:16 +20:04:31 2010-Jan-13 03:11:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:11:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6775 RA/Dec = 10:14:46 +20:04:31 2010-Jan-13 03:13:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:13:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6775 RA/Dec = 10:16:16 +20:04:32 2010-Jan-13 03:14:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:14:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6775 RA/Dec = 10:17:46 +20:04:33 2010-Jan-13 03:16:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:16:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6775 RA/Dec = 10:19:17 +20:04:33 2010-Jan-13 03:17:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:17:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6775 RA/Dec = 10:20:47 +20:04:34 2010-Jan-13 03:18:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:18:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:18:54 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-13 03:18:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:18:54 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-13 03:18:54 LOG1 fixed_driftmap: New position: year = 2010.0359702258729 RA = 10:21:59.1 RA/Dec = 10:22:34.3 +20:01:13.9 2010-Jan-13 03:18:54 NOTE fixed_driftmap: Correcting ZA to 1:40:00.2 ... 2010-Jan-13 03:18:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6667117099 -CF 2010-Jan-13 03:18:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:18:54 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:18:54 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-13 03:18:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:18:54 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:18:54 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-13 03:18:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:18:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:18:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:18:54 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:18:54 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-13 03:18:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6667117099 -CF 2010-Jan-13 03:18:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:18:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:18:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:18:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:18:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:18:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:18:55 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:18:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:18:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:18:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:18:55 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:18:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:18:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:18:55 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:18:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:18:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:18:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:18:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:18:55 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:18:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:18:55 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:18:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:18:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:18:55 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:18:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:18:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:18:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:18:55 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:18:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:18:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:18:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:18:55 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:18:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:18:55 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-13 03:18:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:18:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:18:55 INFO2 take_data: Starting WAPP 1-second scan: 1300070 2010-Jan-13 03:18:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:18:56 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-13 03:18:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:18:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:18:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26337.00 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:18:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:18:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:18:58 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:18:58 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:18:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:18:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:18:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:18:58 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:18:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:18:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:18:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:18:58 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:18:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:18:58 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:18:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:18:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:18:58 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-13 03:18:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Jan-13 03:18:59 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Jan-13 03:18:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:18:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:18:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:18:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:18:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:18:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:18:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:18:59 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-13 03:18:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:18:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:18:59 INFO2 take_data: Starting WAPP 600-second scan: 1300071 2010-Jan-13 03:18:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:18:59 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-13 03:18:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:18:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:18:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:18:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26340.00 2010-Jan-13 03:18:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0010.fits 2010-Jan-13 03:18:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0010.fits} 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:19:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:19:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:19:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6763 RA/Dec = 10:22:17 +20:04:30 2010-Jan-13 03:20:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:20:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6763 RA/Dec = 10:23:47 +20:04:31 2010-Jan-13 03:22:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:22:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6763 RA/Dec = 10:25:18 +20:04:32 2010-Jan-13 03:23:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:23:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6763 RA/Dec = 10:26:48 +20:04:32 2010-Jan-13 03:25:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:25:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6763 RA/Dec = 10:28:18 +20:04:33 2010-Jan-13 03:26:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:26:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6763 RA/Dec = 10:29:49 +20:04:33 2010-Jan-13 03:28:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:28:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6763 RA/Dec = 10:31:19 +20:04:34 2010-Jan-13 03:29:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:29:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:29:00 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:29:00 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 LOG1 fixed_driftmap: New position: year = 2010.035989428854 RA = 10:32:07.1 RA/Dec = 10:32:41.9 +20:01:09.9 2010-Jan-13 03:29:00 NOTE fixed_driftmap: Correcting ZA to 1:39:56.2 ... 2010-Jan-13 03:29:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6656136222 -CF 2010-Jan-13 03:29:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:29:00 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:29:00 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:29:00 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:29:00 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:29:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:29:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:29:00 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:29:00 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6656136222 -CF 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:29:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:29:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:29:00 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-13 03:29:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:29:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:29:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:29:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:29:01 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:29:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:29:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:29:01 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:29:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:29:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:29:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:29:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:29:01 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:29:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:29:01 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:29:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:29:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:29:01 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:29:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:29:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:29:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:29:01 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:29:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:29:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:29:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:29:01 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:29:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:29:01 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:29:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:29:01 INFO2 take_data: Starting WAPP 1-second scan: 1300072 2010-Jan-13 03:29:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:29:01 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2010-Jan-13 03:29:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:29:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:29:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26942.00 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:29:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:29:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:29:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:29:03 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:29:03 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:29:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:29:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:29:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:29:03 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:29:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:29:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:29:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:29:03 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:29:03 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:29:03 LOG5 finish_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:29:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:29:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:29:03 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-13 03:29:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Jan-13 03:29:03 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Jan-13 03:29:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:29:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:29:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:29:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:29:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:29:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:29:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:29:04 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Jan-13 03:29:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:29:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:29:04 INFO2 take_data: Starting WAPP 600-second scan: 1300073 2010-Jan-13 03:29:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:29:04 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Jan-13 03:29:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:29:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:29:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:29:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26945.00 2010-Jan-13 03:29:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0011.fits 2010-Jan-13 03:29:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0011.fits} 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:29:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:29:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6752 RA/Dec = 10:32:49 +20:04:30 2010-Jan-13 03:31:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:31:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6753 RA/Dec = 10:34:19 +20:04:31 2010-Jan-13 03:32:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:32:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6752 RA/Dec = 10:35:50 +20:04:32 2010-Jan-13 03:32:51 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:32:51.300 (seconds: 12771.300)!} 2010-Jan-13 03:32:51 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:32:51.300 (seconds: 12771.300)! 2010-Jan-13 03:32:52 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 12770.0 to 12771.0! 2010-Jan-13 03:32:53 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (12770.0 - 12772.0)! 2010-Jan-13 03:34:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:34:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6752 RA/Dec = 10:37:20 +20:04:32 2010-Jan-13 03:35:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:35:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6752 RA/Dec = 10:38:50 +20:04:33 2010-Jan-13 03:37:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:37:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6752 RA/Dec = 10:40:21 +20:04:33 2010-Jan-13 03:38:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:38:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6752 RA/Dec = 10:41:51 +20:04:34 2010-Jan-13 03:39:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:39:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:39:05 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:39:05 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG1 fixed_driftmap: New position: year = 2010.0360086001472 RA = 10:42:14.0 RA/Dec = 10:42:48.6 +20:01:06.3 2010-Jan-13 03:39:05 NOTE fixed_driftmap: Correcting ZA to 1:39:52.6 ... 2010-Jan-13 03:39:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6646239278 -CF 2010-Jan-13 03:39:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:39:05 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:39:05 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:39:05 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:39:05 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:39:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:39:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:39:05 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:39:05 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6646239278 -CF 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:39:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:39:05 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:39:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:39:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:39:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:39:05 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-Jan-13 03:39:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:39:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:39:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:39:06 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:39:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:39:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:39:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:39:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:39:06 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:39:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:39:06 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:39:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:39:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:39:06 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:39:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:39:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:39:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:39:06 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:39:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:39:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:39:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:39:06 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:39:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:39:06 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:39:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:39:06 INFO2 take_data: Starting WAPP 1-second scan: 1300074 2010-Jan-13 03:39:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:39:06 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-Jan-13 03:39:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:39:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:39:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27547.00 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:39:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:39:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:39:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:39:08 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:39:08 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:39:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:39:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:39:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:39:08 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:39:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:39:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:39:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:39:08 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:39:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:39:08 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:39:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:39:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:39:08 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Jan-13 03:39:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Jan-13 03:39:08 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Jan-13 03:39:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:39:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:39:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:39:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:39:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:39:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:39:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:39:09 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2010-Jan-13 03:39:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:39:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:39:09 INFO2 take_data: Starting WAPP 600-second scan: 1300075 2010-Jan-13 03:39:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:39:09 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Jan-13 03:39:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:39:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:39:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:39:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27550.00 2010-Jan-13 03:39:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0012.fits 2010-Jan-13 03:39:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0012.fits} 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:39:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:40:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:40:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6742 RA/Dec = 10:43:21 +20:04:31 2010-Jan-13 03:41:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:41:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6742 RA/Dec = 10:44:51 +20:04:31 2010-Jan-13 03:43:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:43:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6742 RA/Dec = 10:46:22 +20:04:32 2010-Jan-13 03:44:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:44:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6742 RA/Dec = 10:47:52 +20:04:32 2010-Jan-13 03:46:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:46:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6742 RA/Dec = 10:49:22 +20:04:32 2010-Jan-13 03:47:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:47:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6742 RA/Dec = 10:50:53 +20:04:33 2010-Jan-13 03:49:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:49:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:49:10 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:49:10 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 LOG1 fixed_driftmap: New position: year = 2010.0360277714403 RA = 10:52:20.9 RA/Dec = 10:52:55.2 +20:01:03.2 2010-Jan-13 03:49:10 NOTE fixed_driftmap: Correcting ZA to 1:39:49.5 ... 2010-Jan-13 03:49:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6637426463 -CF 2010-Jan-13 03:49:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:49:10 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:49:10 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:49:10 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:49:10 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:49:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:49:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:49:10 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:49:10 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6637426463 -CF 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:49:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:49:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:49:10 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Jan-13 03:49:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:49:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:49:10 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:49:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:49:10 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:49:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:49:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:49:11 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:49:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:49:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:49:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:49:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:49:11 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:49:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:49:11 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:49:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:49:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:49:11 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:49:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:49:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:49:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:49:11 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:49:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:49:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:49:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:49:11 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:49:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:49:11 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:49:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:49:11 INFO2 take_data: Starting WAPP 1-second scan: 1300076 2010-Jan-13 03:49:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:49:11 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2010-Jan-13 03:49:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:49:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:49:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28152.00 2010-Jan-13 03:49:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:49:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6742 RA/Dec = 10:52:23 +20:04:33 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:49:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:49:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:49:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:49:13 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:49:13 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:49:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:49:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:49:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:49:13 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:49:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:49:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:49:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:49:13 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:49:13 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:49:13 LOG5 finish_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:49:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:49:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:49:13 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Jan-13 03:49:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Jan-13 03:49:13 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Jan-13 03:49:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:49:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:49:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:49:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:49:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:49:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:49:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:49:14 LOG5 begin_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2010-Jan-13 03:49:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:49:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:49:14 INFO2 take_data: Starting WAPP 600-second scan: 1300077 2010-Jan-13 03:49:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:49:14 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Jan-13 03:49:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:49:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:49:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:49:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0013.fits 2010-Jan-13 03:49:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28155.00 2010-Jan-13 03:49:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0013.fits} 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:50:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:50:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6733 RA/Dec = 10:53:53 +20:04:31 2010-Jan-13 03:52:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:52:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6733 RA/Dec = 10:55:23 +20:04:31 2010-Jan-13 03:53:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:53:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6733 RA/Dec = 10:56:54 +20:04:31 2010-Jan-13 03:55:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:55:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6733 RA/Dec = 10:58:24 +20:04:32 2010-Jan-13 03:56:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:56:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6733 RA/Dec = 10:59:54 +20:04:32 2010-Jan-13 03:58:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:58:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6733 RA/Dec = 11:01:25 +20:04:33 2010-Jan-13 03:59:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:59:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:59:15 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:59:15 LOG5 end_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 LOG1 fixed_driftmap: New position: year = 2010.0360469427335 RA = 11:02:27.8 RA/Dec = 11:03:01.9 +20:01:00.4 2010-Jan-13 03:59:15 NOTE fixed_driftmap: Correcting ZA to 1:39:46.7 ... 2010-Jan-13 03:59:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6629714945 -CF 2010-Jan-13 03:59:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 03:59:15 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 03:59:15 LOG5 begin_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 03:59:15 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 03:59:15 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 03:59:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 03:59:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:59:15 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 03:59:15 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6629714945 -CF 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:59:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 03:59:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 03:59:15 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Jan-13 03:59:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 03:59:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:59:15 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 03:59:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:59:15 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 03:59:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:59:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:59:16 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:59:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 03:59:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 03:59:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:59:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 03:59:16 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 03:59:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 03:59:16 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 03:59:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 03:59:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 03:59:16 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 03:59:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 03:59:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 03:59:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:59:16 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:59:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 03:59:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:59:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:59:16 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 03:59:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:59:16 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 03:59:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:59:16 INFO2 take_data: Starting WAPP 1-second scan: 1300078 2010-Jan-13 03:59:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:59:16 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2010-Jan-13 03:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:59:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 03:59:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28757.00 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:59:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 03:59:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 03:59:18 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 03:59:18 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 03:59:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 03:59:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 03:59:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 03:59:18 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 03:59:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 03:59:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 03:59:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 03:59:18 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 03:59:18 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 03:59:18 LOG5 finish_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 03:59:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 03:59:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 03:59:18 LOG5 end_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Jan-13 03:59:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Jan-13 03:59:18 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Jan-13 03:59:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 03:59:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 03:59:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 03:59:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 03:59:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 03:59:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 03:59:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 03:59:19 LOG5 begin_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2010-Jan-13 03:59:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 03:59:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 03:59:19 INFO2 take_data: Starting WAPP 600-second scan: 1300079 2010-Jan-13 03:59:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 03:59:19 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Jan-13 03:59:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 03:59:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 03:59:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 03:59:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28760.00 2010-Jan-13 03:59:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0014.fits 2010-Jan-13 03:59:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0014.fits} 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 03:59:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 03:59:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6726 RA/Dec = 11:02:55 +20:04:30 2010-Jan-13 04:01:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:01:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6726 RA/Dec = 11:04:25 +20:04:31 2010-Jan-13 04:02:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:02:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6726 RA/Dec = 11:05:55 +20:04:31 2010-Jan-13 04:02:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:02:49.301 (seconds: 14569.301)!} 2010-Jan-13 04:02:49 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:02:49.301 (seconds: 14569.301)! 2010-Jan-13 04:02:50 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 14568.0 to 14569.0! 2010-Jan-13 04:02:51 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (14568.0 - 14570.0)! 2010-Jan-13 04:04:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:04:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6726 RA/Dec = 11:07:26 +20:04:31 2010-Jan-13 04:05:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:05:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6726 RA/Dec = 11:08:56 +20:04:32 2010-Jan-13 04:07:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:07:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6726 RA/Dec = 11:10:26 +20:04:32 2010-Jan-13 04:08:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:08:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6726 RA/Dec = 11:11:57 +20:04:32 2010-Jan-13 04:09:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:09:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:09:20 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:09:20 LOG5 end_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 LOG1 fixed_driftmap: New position: year = 2010.0360661140264 RA = 11:12:34.7 RA/Dec = 11:13:08.6 +20:00:58.0 2010-Jan-13 04:09:20 NOTE fixed_driftmap: Correcting ZA to 1:39:44.3 ... 2010-Jan-13 04:09:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6623119822 -CF 2010-Jan-13 04:09:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:09:20 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:09:20 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:09:20 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:09:20 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:09:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:09:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:09:20 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:09:20 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6623119822 -CF 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:09:20 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:09:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:09:20 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Jan-13 04:09:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:09:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:09:20 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:09:20 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:09:20 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:09:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:09:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:09:21 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:09:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:09:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:09:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:09:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:09:21 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:09:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:09:21 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:09:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:09:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:09:21 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:09:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:09:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:09:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:09:21 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:09:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:09:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:09:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:09:21 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:09:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:09:21 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:09:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:09:21 INFO2 take_data: Starting WAPP 1-second scan: 1300080 2010-Jan-13 04:09:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:09:21 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2010-Jan-13 04:09:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:09:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:09:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29362.00 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:09:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:09:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:09:23 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:09:23 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:09:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:09:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:09:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:09:23 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:09:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:09:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:09:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:09:23 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:09:23 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:09:23 LOG5 finish_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:09:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:09:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:09:23 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Jan-13 04:09:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Jan-13 04:09:23 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Jan-13 04:09:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:09:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:09:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:09:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:09:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:09:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:09:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:09:24 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2010-Jan-13 04:09:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:09:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:09:24 INFO2 take_data: Starting WAPP 600-second scan: 1300081 2010-Jan-13 04:09:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:09:24 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Jan-13 04:09:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:09:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:09:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:09:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0015.fits 2010-Jan-13 04:09:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29365.00 2010-Jan-13 04:09:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0015.fits} 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:10:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:10:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6719 RA/Dec = 11:13:27 +20:04:30 2010-Jan-13 04:11:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:11:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6719 RA/Dec = 11:14:57 +20:04:31 2010-Jan-13 04:13:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:13:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6720 RA/Dec = 11:16:27 +20:04:31 2010-Jan-13 04:14:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:14:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6719 RA/Dec = 11:17:58 +20:04:31 2010-Jan-13 04:16:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:16:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6719 RA/Dec = 11:19:28 +20:04:32 2010-Jan-13 04:17:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:17:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6720 RA/Dec = 11:20:58 +20:04:32 2010-Jan-13 04:19:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:19:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6719 RA/Dec = 11:22:29 +20:04:32 2010-Jan-13 04:19:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:19:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:19:25 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:19:25 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 LOG1 fixed_driftmap: New position: year = 2010.0360852853196 RA = 11:22:41.7 RA/Dec = 11:23:15.2 +20:00:56.1 2010-Jan-13 04:19:25 NOTE fixed_driftmap: Correcting ZA to 1:39:42.4 ... 2010-Jan-13 04:19:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6617653884 -CF 2010-Jan-13 04:19:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:19:25 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:19:25 LOG5 begin_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:19:25 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:19:25 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:19:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:19:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:19:25 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:19:25 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6617653884 -CF 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:19:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:19:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:19:25 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Jan-13 04:19:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:19:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:19:25 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:19:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:19:25 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2010-Jan-13 04:19:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:19:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:19:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:19:26 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2010-Jan-13 04:19:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:19:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:19:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:19:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:19:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:19:27 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:19:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:19:27 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:19:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:19:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:19:27 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:19:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:19:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:19:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:19:27 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:19:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:19:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:19:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:19:27 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:19:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:19:27 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:19:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:19:27 INFO2 take_data: Starting WAPP 1-second scan: 1300082 2010-Jan-13 04:19:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:19:27 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2010-Jan-13 04:19:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:19:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:19:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29968.00 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:19:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:19:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:19:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:19:29 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2010-Jan-13 04:19:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:19:29 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Jan-13 04:19:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:19:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:19:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:19:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:19:29 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Jan-13 04:19:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:19:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:19:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:19:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:19:29 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:19:30 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:19:30 LOG5 finish_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Jan-13 04:19:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:19:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:19:30 LOG5 end_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Jan-13 04:19:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Jan-13 04:19:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:19:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:19:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:19:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:19:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:19:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:19:30 LOG5 begin_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:19:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:19:30 INFO2 take_data: Starting WAPP 600-second scan: 1300083 2010-Jan-13 04:19:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:19:30 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Jan-13 04:19:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:19:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:19:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:19:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29971.00 2010-Jan-13 04:19:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0016.fits 2010-Jan-13 04:19:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0016.fits} 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:20:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:20:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6713 RA/Dec = 11:23:59 +20:04:30 2010-Jan-13 04:22:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:22:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6713 RA/Dec = 11:25:29 +20:04:31 2010-Jan-13 04:23:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:23:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6714 RA/Dec = 11:26:59 +20:04:31 2010-Jan-13 04:25:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:25:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6713 RA/Dec = 11:28:30 +20:04:31 2010-Jan-13 04:26:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:26:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6713 RA/Dec = 11:30:00 +20:04:31 2010-Jan-13 04:28:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:28:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6714 RA/Dec = 11:31:30 +20:04:32 2010-Jan-13 04:29:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:29:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:29:31 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Jan-13 04:29:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:29:31 LOG5 end_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2010-Jan-13 04:29:31 LOG1 fixed_driftmap: New position: year = 2010.0361044883009 RA = 11:32:49.6 RA/Dec = 11:33:22.9 +20:00:54.5 2010-Jan-13 04:29:31 NOTE fixed_driftmap: Correcting ZA to 1:39:40.8 ... 2010-Jan-13 04:29:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6613321563 -CF 2010-Jan-13 04:29:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:29:31 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:29:31 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Jan-13 04:29:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:29:31 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:29:31 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Jan-13 04:29:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:29:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:29:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:29:31 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:29:31 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Jan-13 04:29:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6613321563 -CF 2010-Jan-13 04:29:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:29:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:29:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:29:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:29:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:29:32 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:29:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:29:32 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:29:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:29:32 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:29:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:29:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:29:32 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:29:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:29:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:29:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:29:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:29:32 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:29:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:29:32 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:29:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:29:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:29:32 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:29:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:29:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:29:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:29:32 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:29:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:29:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:29:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:29:32 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:29:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:29:32 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:29:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:29:32 INFO2 take_data: Starting WAPP 1-second scan: 1300084 2010-Jan-13 04:29:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:29:32 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2010-Jan-13 04:29:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:29:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:29:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30573.00 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:29:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:29:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:29:34 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:29:34 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:29:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:29:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:29:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:29:34 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:29:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:29:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:29:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:29:34 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:29:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:29:34 LOG5 finish_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:29:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:29:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:29:34 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Jan-13 04:29:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Jan-13 04:29:34 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Jan-13 04:29:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:29:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:29:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:29:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:29:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:29:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:29:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:29:35 LOG5 begin_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2010-Jan-13 04:29:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:29:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:29:35 INFO2 take_data: Starting WAPP 600-second scan: 1300085 2010-Jan-13 04:29:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:29:35 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Jan-13 04:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:29:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:29:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:29:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30576.00 2010-Jan-13 04:29:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0017.fits 2010-Jan-13 04:29:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0017.fits} 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:29:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:29:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6709 RA/Dec = 11:33:01 +20:04:30 2010-Jan-13 04:31:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:31:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6709 RA/Dec = 11:34:31 +20:04:30 2010-Jan-13 04:32:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:32:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6709 RA/Dec = 11:36:01 +20:04:31 2010-Jan-13 04:34:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:34:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6708 RA/Dec = 11:37:31 +20:04:31 2010-Jan-13 04:35:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:35:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6709 RA/Dec = 11:39:02 +20:04:31 2010-Jan-13 04:37:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:37:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6709 RA/Dec = 11:40:32 +20:04:31 2010-Jan-13 04:38:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:38:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6709 RA/Dec = 11:42:02 +20:04:31 2010-Jan-13 04:39:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:39:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:39:36 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:39:36 LOG5 end_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 LOG1 fixed_driftmap: New position: year = 2010.0361236595941 RA = 11:42:56.5 RA/Dec = 11:43:29.5 +20:00:53.4 2010-Jan-13 04:39:36 NOTE fixed_driftmap: Correcting ZA to 1:39:39.7 ... 2010-Jan-13 04:39:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6610145610 -CF 2010-Jan-13 04:39:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:39:36 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:39:36 LOG5 begin_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:39:36 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:39:36 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:39:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:39:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:39:36 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:39:36 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6610145610 -CF 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:39:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:39:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:39:36 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Jan-13 04:39:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:39:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:39:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:39:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:39:36 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:39:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:39:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:39:37 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:39:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:39:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:39:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:39:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:39:37 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:39:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:39:37 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:39:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:39:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:39:37 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:39:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:39:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:39:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:39:37 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:39:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:39:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:39:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:39:37 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:39:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:39:37 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:39:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:39:37 INFO2 take_data: Starting WAPP 1-second scan: 1300086 2010-Jan-13 04:39:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:39:37 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2010-Jan-13 04:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:39:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:39:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31178.00 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:39:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:39:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:39:39 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:39:39 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:39:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:39:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:39:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:39:39 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:39:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:39:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:39:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:39:39 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:39:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:39:39 LOG5 finish_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:39:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:39:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:39:39 LOG5 end_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Jan-13 04:39:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Jan-13 04:39:39 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Jan-13 04:39:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:39:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:39:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:39:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:39:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:39:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:39:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:39:40 LOG5 begin_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2010-Jan-13 04:39:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:39:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:39:40 INFO2 take_data: Starting WAPP 600-second scan: 1300087 2010-Jan-13 04:39:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:39:40 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Jan-13 04:39:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:39:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:39:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:39:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31181.00 2010-Jan-13 04:39:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0018.fits 2010-Jan-13 04:39:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0018.fits} 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:39:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:40:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:40:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6706 RA/Dec = 11:43:33 +20:04:30 2010-Jan-13 04:41:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:41:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6707 RA/Dec = 11:45:03 +20:04:30 2010-Jan-13 04:43:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:43:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6706 RA/Dec = 11:46:33 +20:04:30 2010-Jan-13 04:44:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:44:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6706 RA/Dec = 11:48:04 +20:04:31 2010-Jan-13 04:46:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:46:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6706 RA/Dec = 11:49:34 +20:04:31 2010-Jan-13 04:47:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:47:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6706 RA/Dec = 11:51:04 +20:04:31 2010-Jan-13 04:47:46 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:47:46.301 (seconds: 17266.301)!} 2010-Jan-13 04:47:46 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:47:46.301 (seconds: 17266.301)! 2010-Jan-13 04:47:47 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17265.0 to 17266.0! 2010-Jan-13 04:47:48 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17265.0 - 17267.0)! 2010-Jan-13 04:49:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:49:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6706 RA/Dec = 11:52:34 +20:04:31 2010-Jan-13 04:49:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:49:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:49:41 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:49:41 LOG5 end_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 LOG1 fixed_driftmap: New position: year = 2010.0361428308872 RA = 11:53:03.5 RA/Dec = 11:53:36.2 +20:00:52.6 2010-Jan-13 04:49:41 NOTE fixed_driftmap: Correcting ZA to 1:39:38.9 ... 2010-Jan-13 04:49:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6608124111 -CF 2010-Jan-13 04:49:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:49:41 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:49:41 LOG5 begin_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:49:41 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:49:41 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:49:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:49:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:49:41 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:49:41 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6608124111 -CF 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:49:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:49:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:49:41 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Jan-13 04:49:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:49:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:49:42 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:49:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:49:42 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:49:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:49:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:49:42 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:49:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:49:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:49:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:49:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:49:42 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:49:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:49:42 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:49:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:49:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:49:42 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:49:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:49:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:49:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:49:42 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:49:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:49:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:49:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:49:42 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:49:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:49:42 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:49:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:49:42 INFO2 take_data: Starting WAPP 1-second scan: 1300088 2010-Jan-13 04:49:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:49:42 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2010-Jan-13 04:49:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:49:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:49:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31783.00 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:49:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:49:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:49:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:49:44 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:49:44 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:49:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:49:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:49:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:49:44 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:49:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:49:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:49:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:49:44 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:49:44 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:49:44 LOG5 finish_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:49:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:49:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:49:44 LOG5 end_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Jan-13 04:49:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Jan-13 04:49:44 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Jan-13 04:49:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:49:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:49:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:49:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:49:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:49:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:49:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:49:45 LOG5 begin_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2010-Jan-13 04:49:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:49:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:49:45 INFO2 take_data: Starting WAPP 600-second scan: 1300089 2010-Jan-13 04:49:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:49:45 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Jan-13 04:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:49:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:49:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31786.00 2010-Jan-13 04:49:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0019.fits 2010-Jan-13 04:49:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0019.fits} 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:50:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:50:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6704 RA/Dec = 11:54:05 +20:04:30 2010-Jan-13 04:52:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:52:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6704 RA/Dec = 11:55:35 +20:04:30 2010-Jan-13 04:53:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:53:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6704 RA/Dec = 11:57:05 +20:04:30 2010-Jan-13 04:55:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:55:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6704 RA/Dec = 11:58:36 +20:04:30 2010-Jan-13 04:56:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:56:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6704 RA/Dec = 12:00:06 +20:04:30 2010-Jan-13 04:58:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:58:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6704 RA/Dec = 12:01:36 +20:04:30 2010-Jan-13 04:59:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 04:59:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6704 RA/Dec = 12:03:06 +20:04:30 2010-Jan-13 04:59:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:59:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:59:46 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:59:46 LOG5 end_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG1 fixed_driftmap: New position: year = 2010.0361620021802 RA = 12:03:10.4 RA/Dec = 12:03:42.8 +20:00:52.3 2010-Jan-13 04:59:46 NOTE fixed_driftmap: Correcting ZA to 1:39:38.6 ... 2010-Jan-13 04:59:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6607261014 -CF 2010-Jan-13 04:59:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 04:59:46 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 04:59:46 LOG5 begin_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 04:59:46 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 04:59:46 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 04:59:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 04:59:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:59:46 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 04:59:46 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6607261014 -CF 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 04:59:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 04:59:46 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 04:59:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:59:46 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 04:59:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:59:46 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2010-Jan-13 04:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 04:59:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:59:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:59:47 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:59:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 04:59:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 04:59:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:59:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 04:59:47 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 04:59:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 04:59:47 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 04:59:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 04:59:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 04:59:47 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 04:59:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 04:59:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 04:59:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:59:47 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:59:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 04:59:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:59:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:59:47 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 04:59:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:59:47 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 04:59:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:59:47 INFO2 take_data: Starting WAPP 1-second scan: 1300090 2010-Jan-13 04:59:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:59:47 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2010-Jan-13 04:59:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:59:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 04:59:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32388.00 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:59:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:59:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 04:59:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 04:59:49 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 04:59:49 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 04:59:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 04:59:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 04:59:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 04:59:49 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 04:59:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 04:59:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 04:59:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 04:59:49 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 04:59:49 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 04:59:49 LOG5 finish_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 04:59:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 04:59:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 04:59:49 LOG5 end_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Jan-13 04:59:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Jan-13 04:59:49 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Jan-13 04:59:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 04:59:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 04:59:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 04:59:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 04:59:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 04:59:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 04:59:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 04:59:50 LOG5 begin_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2010-Jan-13 04:59:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 04:59:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 04:59:50 INFO2 take_data: Starting WAPP 600-second scan: 1300091 2010-Jan-13 04:59:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 04:59:50 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Jan-13 04:59:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 04:59:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 04:59:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 04:59:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32391.00 2010-Jan-13 04:59:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0020.fits 2010-Jan-13 04:59:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0020.fits} 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 04:59:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:01:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:01:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:04:37 +20:04:30 2010-Jan-13 05:02:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:02:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:06:07 +20:04:30 2010-Jan-13 05:04:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:04:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:07:37 +20:04:30 2010-Jan-13 05:05:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:05:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:09:08 +20:04:30 2010-Jan-13 05:07:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:07:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:10:38 +20:04:30 2010-Jan-13 05:08:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:08:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6703 RA/Dec = 12:12:08 +20:04:30 2010-Jan-13 05:09:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:09:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:09:51 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:09:51 LOG5 end_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 LOG1 fixed_driftmap: New position: year = 2010.0361811734733 RA = 12:13:17.3 RA/Dec = 12:13:49.5 +20:00:52.4 2010-Jan-13 05:09:51 NOTE fixed_driftmap: Correcting ZA to 1:39:38.7 ... 2010-Jan-13 05:09:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6607557991 -CF 2010-Jan-13 05:09:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 05:09:51 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 05:09:51 LOG5 begin_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 05:09:51 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 05:09:51 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 05:09:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 05:09:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:09:51 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 05:09:51 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6607557991 -CF 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:09:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 05:09:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 05:09:51 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Jan-13 05:09:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 05:09:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:09:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 05:09:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:09:52 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:09:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:09:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:09:52 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:09:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 05:09:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:09:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:09:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:09:52 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:09:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:09:52 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:09:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:09:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 05:09:52 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 05:09:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 05:09:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 05:09:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:09:52 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:09:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 05:09:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:09:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:09:52 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 05:09:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:09:52 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 05:09:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:09:52 INFO2 take_data: Starting WAPP 1-second scan: 1300092 2010-Jan-13 05:09:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:09:52 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2010-Jan-13 05:09:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:09:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 05:09:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32993.00 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:09:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:09:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:09:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:09:54 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:09:54 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 05:09:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 05:09:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 05:09:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:09:54 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:09:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 05:09:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:09:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:09:54 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 05:09:54 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 05:09:54 LOG5 finish_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 05:09:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 05:09:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 05:09:54 LOG5 end_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-13 05:09:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2010-Jan-13 05:09:55 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2010-Jan-13 05:09:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 05:09:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 05:09:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 05:09:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 05:09:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 05:09:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 05:09:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:09:55 LOG5 begin_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2010-Jan-13 05:09:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 05:09:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:09:55 INFO2 take_data: Starting WAPP 600-second scan: 1300093 2010-Jan-13 05:09:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:09:55 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Jan-13 05:09:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 05:09:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:09:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 05:09:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32996.00 2010-Jan-13 05:09:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0021.fits 2010-Jan-13 05:09:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0021.fits} 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:09:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:10:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:10:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:13:38 +20:04:30 2010-Jan-13 05:11:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:11:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:15:09 +20:04:30 2010-Jan-13 05:13:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:13:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6703 RA/Dec = 12:16:39 +20:04:30 2010-Jan-13 05:14:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:14:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:18:09 +20:04:30 2010-Jan-13 05:16:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:16:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:19:40 +20:04:30 2010-Jan-13 05:17:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:17:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6703 RA/Dec = 12:21:10 +20:04:30 2010-Jan-13 05:19:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:19:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6703 RA/Dec = 12:22:40 +20:04:30 2010-Jan-13 05:19:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:19:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:19:56 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:19:56 LOG5 end_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 LOG1 fixed_driftmap: New position: year = 2010.0362003447665 RA = 12:23:24.3 RA/Dec = 12:23:56.1 +20:00:52.9 2010-Jan-13 05:19:56 NOTE fixed_driftmap: Correcting ZA to 1:39:39.2 ... 2010-Jan-13 05:19:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6609014460 -CF 2010-Jan-13 05:19:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 05:19:56 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 05:19:56 LOG5 begin_task: Level: (2) ID = <10346> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 05:19:56 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 05:19:56 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 05:19:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 05:19:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:19:56 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 05:19:56 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6609014460 -CF 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:19:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 05:19:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 05:19:56 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-Jan-13 05:19:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 05:19:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:19:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 05:19:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:19:57 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:19:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:19:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:19:57 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:19:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 05:19:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:19:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:19:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:19:57 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:19:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:19:57 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:19:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:19:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 05:19:57 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 05:19:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 05:19:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 05:19:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:19:57 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:19:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 05:19:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:19:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:19:57 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 05:19:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:19:57 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 05:19:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:19:57 INFO2 take_data: Starting WAPP 1-second scan: 1300094 2010-Jan-13 05:19:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:19:57 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2010-Jan-13 05:19:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:19:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 05:19:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33598.00 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:19:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:19:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:19:59 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:19:59 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 05:19:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 05:19:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 05:19:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:19:59 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:19:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 05:19:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:19:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:19:59 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 05:19:59 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 05:19:59 LOG5 finish_task: Level: (2) ID = <10346> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 05:19:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 05:19:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 05:19:59 LOG5 end_task: Level: (2) ID = <10346> Status = 0 0 0 0 ok 2010-Jan-13 05:19:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2010-Jan-13 05:19:59 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2010-Jan-13 05:19:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 05:19:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 05:20:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 05:20:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 05:20:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 05:20:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 05:20:00 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:20:00 LOG5 begin_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2010-Jan-13 05:20:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 05:20:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:20:00 INFO2 take_data: Starting WAPP 600-second scan: 1300095 2010-Jan-13 05:20:00 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:20:00 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2010-Jan-13 05:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 05:20:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:20:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 05:20:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33601.00 2010-Jan-13 05:20:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0022.fits 2010-Jan-13 05:20:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0022.fits} 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:20:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:20:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:20:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6705 RA/Dec = 12:24:10 +20:04:30 2010-Jan-13 05:22:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:22:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6705 RA/Dec = 12:25:41 +20:04:30 2010-Jan-13 05:23:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:23:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8958 1.6705 RA/Dec = 12:27:11 +20:04:30 2010-Jan-13 05:25:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:25:12 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6705 RA/Dec = 12:28:41 +20:04:30 2010-Jan-13 05:26:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:26:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6705 RA/Dec = 12:30:12 +20:04:30 2010-Jan-13 05:28:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:28:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6705 RA/Dec = 12:31:42 +20:04:29 2010-Jan-13 05:29:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:29:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6705 RA/Dec = 12:33:12 +20:04:29 2010-Jan-13 05:30:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:30:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:30:01 LOG5 end_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:30:01 LOG5 end_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG1 fixed_driftmap: New position: year = 2010.0362195160596 RA = 12:33:31.2 RA/Dec = 12:34:02.8 +20:00:53.9 2010-Jan-13 05:30:01 NOTE fixed_driftmap: Correcting ZA to 1:39:40.2 ... 2010-Jan-13 05:30:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6611627584 -CF 2010-Jan-13 05:30:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 05:30:01 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 05:30:01 LOG5 begin_task: Level: (2) ID = <10357> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 05:30:01 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 05:30:01 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 05:30:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 05:30:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:30:01 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 05:30:01 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6611627584 -CF 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 05:30:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 05:30:01 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 05:30:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:30:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 05:30:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:30:01 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2010-Jan-13 05:30:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:30:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:30:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:30:03 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:30:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 05:30:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:30:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:30:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:30:03 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:30:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:30:03 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:30:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:30:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 05:30:03 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 05:30:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 05:30:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 05:30:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:30:03 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:30:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 05:30:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:30:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:30:03 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 05:30:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:30:03 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 05:30:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:30:03 INFO2 take_data: Starting WAPP 1-second scan: 1300096 2010-Jan-13 05:30:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:30:03 LOG5 begin_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2010-Jan-13 05:30:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:30:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 05:30:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34204.00 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:30:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:30:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:30:05 LOG5 end_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:30:05 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 05:30:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 05:30:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 05:30:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:30:05 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:30:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 05:30:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:30:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:30:05 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 05:30:05 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 05:30:05 LOG5 finish_task: Level: (2) ID = <10357> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 05:30:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 05:30:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 05:30:05 LOG5 end_task: Level: (2) ID = <10357> Status = 0 0 0 0 ok 2010-Jan-13 05:30:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2010-Jan-13 05:30:05 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2010-Jan-13 05:30:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 05:30:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 05:30:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 05:30:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 05:30:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 05:30:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 05:30:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:30:06 LOG5 begin_task: Level: (2) ID = <10366> Status = 0 0 0 0 ok 2010-Jan-13 05:30:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 05:30:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:30:06 INFO2 take_data: Starting WAPP 600-second scan: 1300097 2010-Jan-13 05:30:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:30:06 LOG5 begin_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2010-Jan-13 05:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 05:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:30:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 05:30:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34207.00 2010-Jan-13 05:30:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0023.fits 2010-Jan-13 05:30:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0023.fits} 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:31:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:31:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6707 RA/Dec = 12:34:42 +20:04:30 2010-Jan-13 05:32:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:32:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6707 RA/Dec = 12:36:13 +20:04:30 2010-Jan-13 05:34:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:34:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6707 RA/Dec = 12:37:43 +20:04:30 2010-Jan-13 05:35:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:35:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6707 RA/Dec = 12:39:13 +20:04:29 2010-Jan-13 05:37:12 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:37:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6707 RA/Dec = 12:40:44 +20:04:29 2010-Jan-13 05:38:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:38:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6707 RA/Dec = 12:42:14 +20:04:29 2010-Jan-13 05:40:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:40:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:40:07 LOG5 end_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:40:07 LOG5 end_task: Level: (2) ID = <10366> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 LOG1 fixed_driftmap: New position: year = 2010.0362387190407 RA = 12:43:39.2 RA/Dec = 12:44:10.5 +20:00:55.2 2010-Jan-13 05:40:07 NOTE fixed_driftmap: Correcting ZA to 1:39:41.5 ... 2010-Jan-13 05:40:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6615399457 -CF 2010-Jan-13 05:40:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 05:40:07 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 05:40:07 LOG5 begin_task: Level: (2) ID = <10368> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 05:40:07 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 05:40:07 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 05:40:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 05:40:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:40:07 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 05:40:07 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6615399457 -CF 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:40:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 05:40:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 05:40:07 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-Jan-13 05:40:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 05:40:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:40:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 05:40:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:40:08 LOG5 begin_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:40:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:40:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:40:08 LOG5 end_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:40:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 05:40:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:40:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:40:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:40:08 LOG5 begin_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:40:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:40:08 LOG5 end_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:40:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:40:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 05:40:08 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 05:40:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 05:40:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 05:40:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:40:08 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:40:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 05:40:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:40:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:40:08 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 05:40:08 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:40:08 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 05:40:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:40:08 INFO2 take_data: Starting WAPP 1-second scan: 1300098 2010-Jan-13 05:40:08 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:40:08 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2010-Jan-13 05:40:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:40:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 05:40:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34809.00 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:40:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:40:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:40:10 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:40:10 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 05:40:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 05:40:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 05:40:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:40:10 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:40:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 05:40:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:40:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:40:10 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 05:40:10 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 05:40:10 LOG5 finish_task: Level: (2) ID = <10368> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 05:40:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 05:40:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 05:40:10 LOG5 end_task: Level: (2) ID = <10368> Status = 0 0 0 0 ok 2010-Jan-13 05:40:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2010-Jan-13 05:40:10 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2010-Jan-13 05:40:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 05:40:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 05:40:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 05:40:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 05:40:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 05:40:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 05:40:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:40:11 LOG5 begin_task: Level: (2) ID = <10377> Status = 0 0 0 0 ok 2010-Jan-13 05:40:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 05:40:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:40:11 INFO2 take_data: Starting WAPP 600-second scan: 1300099 2010-Jan-13 05:40:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:40:11 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2010-Jan-13 05:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 05:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:40:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 05:40:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34812.00 2010-Jan-13 05:40:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0024.fits 2010-Jan-13 05:40:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0024.fits} 2010-Jan-13 05:40:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:40:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6710 RA/Dec = 12:43:44 +20:04:30 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:40:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:41:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:41:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6711 RA/Dec = 12:45:14 +20:04:30 2010-Jan-13 05:43:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:43:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6711 RA/Dec = 12:46:45 +20:04:30 2010-Jan-13 05:44:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:44:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6711 RA/Dec = 12:48:15 +20:04:29 2010-Jan-13 05:46:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:46:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6710 RA/Dec = 12:49:45 +20:04:29 2010-Jan-13 05:47:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:47:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6711 RA/Dec = 12:51:16 +20:04:29 2010-Jan-13 05:49:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:49:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6711 RA/Dec = 12:52:46 +20:04:29 2010-Jan-13 05:50:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:50:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:50:12 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:50:12 LOG5 end_task: Level: (2) ID = <10377> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG1 fixed_driftmap: New position: year = 2010.0362578903339 RA = 12:53:46.1 RA/Dec = 12:54:17.1 +20:00:57.0 2010-Jan-13 05:50:12 NOTE fixed_driftmap: Correcting ZA to 1:39:43.3 ... 2010-Jan-13 05:50:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6620310281 -CF 2010-Jan-13 05:50:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 05:50:12 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 05:50:12 LOG5 begin_task: Level: (2) ID = <10379> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 05:50:12 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 05:50:12 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 05:50:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 05:50:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:50:12 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 05:50:12 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6620310281 -CF 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 05:50:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 05:50:12 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 05:50:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:50:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 05:50:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:50:12 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2010-Jan-13 05:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 05:50:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:50:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:50:13 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:50:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 05:50:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 05:50:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:50:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 05:50:13 LOG5 begin_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 05:50:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 05:50:13 LOG5 end_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 05:50:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 05:50:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 05:50:13 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 05:50:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 05:50:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 05:50:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:50:13 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:50:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 05:50:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:50:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:50:13 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 05:50:13 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:50:13 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 05:50:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:50:13 INFO2 take_data: Starting WAPP 1-second scan: 1300100 2010-Jan-13 05:50:13 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:50:13 LOG5 begin_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2010-Jan-13 05:50:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:50:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 05:50:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35414.00 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:50:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:50:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 05:50:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 05:50:15 LOG5 end_task: Level: (4) ID = <10386> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 05:50:15 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 05:50:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 05:50:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 05:50:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 05:50:15 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 05:50:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 05:50:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 05:50:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 05:50:15 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 05:50:15 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 05:50:15 LOG5 finish_task: Level: (2) ID = <10379> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 05:50:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 05:50:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 05:50:15 LOG5 end_task: Level: (2) ID = <10379> Status = 0 0 0 0 ok 2010-Jan-13 05:50:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2010-Jan-13 05:50:15 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2010-Jan-13 05:50:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 05:50:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 05:50:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 05:50:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 05:50:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 05:50:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 05:50:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 05:50:16 LOG5 begin_task: Level: (2) ID = <10388> Status = 0 0 0 0 ok 2010-Jan-13 05:50:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 05:50:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 05:50:16 INFO2 take_data: Starting WAPP 600-second scan: 1300101 2010-Jan-13 05:50:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 05:50:16 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2010-Jan-13 05:50:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 05:50:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 05:50:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 05:50:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35417.00 2010-Jan-13 05:50:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0025.fits 2010-Jan-13 05:50:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0025.fits} 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:50:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 05:50:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:50:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6716 RA/Dec = 12:54:16 +20:04:30 2010-Jan-13 05:52:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:52:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6716 RA/Dec = 12:55:46 +20:04:30 2010-Jan-13 05:53:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:53:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6716 RA/Dec = 12:57:17 +20:04:29 2010-Jan-13 05:55:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:55:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6716 RA/Dec = 12:58:47 +20:04:29 2010-Jan-13 05:56:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:56:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6716 RA/Dec = 13:00:17 +20:04:29 2010-Jan-13 05:58:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:58:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6717 RA/Dec = 13:01:48 +20:04:28 2010-Jan-13 05:59:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 05:59:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6716 RA/Dec = 13:03:18 +20:04:28 2010-Jan-13 06:00:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:00:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:00:17 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:00:17 LOG5 end_task: Level: (2) ID = <10388> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG1 fixed_driftmap: New position: year = 2010.0362770616271 RA = 13:03:53.0 RA/Dec = 13:04:23.8 +20:00:59.2 2010-Jan-13 06:00:17 NOTE fixed_driftmap: Correcting ZA to 1:39:45.5 ... 2010-Jan-13 06:00:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6626355744 -CF 2010-Jan-13 06:00:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:00:17 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:00:17 LOG5 begin_task: Level: (2) ID = <10390> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:00:17 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:00:17 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:00:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:00:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:00:17 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:00:17 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6626355744 -CF 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:00:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:00:17 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:00:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:00:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:00:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:00:17 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2010-Jan-13 06:00:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:00:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:00:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:00:18 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:00:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:00:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:00:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:00:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:00:18 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:00:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:00:18 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:00:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:00:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:00:18 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:00:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:00:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:00:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:00:18 LOG5 begin_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:00:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:00:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:00:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:00:18 LOG5 end_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:00:18 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:00:18 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:00:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:00:18 INFO2 take_data: Starting WAPP 1-second scan: 1300102 2010-Jan-13 06:00:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:00:18 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2010-Jan-13 06:00:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:00:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:00:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36019.00 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:00:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:00:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:00:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:00:20 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:00:20 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:00:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:00:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:00:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:00:20 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:00:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:00:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:00:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:00:20 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:00:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:00:20 LOG5 finish_task: Level: (2) ID = <10390> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:00:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:00:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:00:20 LOG5 end_task: Level: (2) ID = <10390> Status = 0 0 0 0 ok 2010-Jan-13 06:00:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2010-Jan-13 06:00:20 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2010-Jan-13 06:00:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:00:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:00:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:00:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:00:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:00:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:00:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:00:21 LOG5 begin_task: Level: (2) ID = <10399> Status = 0 0 0 0 ok 2010-Jan-13 06:00:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:00:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:00:21 INFO2 take_data: Starting WAPP 600-second scan: 1300103 2010-Jan-13 06:00:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:00:21 LOG5 begin_task: Level: (3) ID = <10400> Status = 0 0 0 0 ok 2010-Jan-13 06:00:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:00:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:00:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:00:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0026.fits 2010-Jan-13 06:00:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36022.00 2010-Jan-13 06:00:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0026.fits} 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:00:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:01:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:01:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6722 RA/Dec = 13:04:48 +20:04:30 2010-Jan-13 06:02:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:02:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6722 RA/Dec = 13:06:19 +20:04:30 2010-Jan-13 06:04:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:04:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6722 RA/Dec = 13:07:49 +20:04:29 2010-Jan-13 06:05:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:05:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6722 RA/Dec = 13:09:19 +20:04:29 2010-Jan-13 06:07:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:07:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6722 RA/Dec = 13:10:49 +20:04:28 2010-Jan-13 06:08:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:08:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6722 RA/Dec = 13:12:20 +20:04:28 2010-Jan-13 06:10:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:10:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8957 1.6722 RA/Dec = 13:13:50 +20:04:28 2010-Jan-13 06:10:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:10:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:10:22 LOG5 end_task: Level: (3) ID = <10400> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:10:22 LOG5 end_task: Level: (2) ID = <10399> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG1 fixed_driftmap: New position: year = 2010.0362962329202 RA = 13:14:00.0 RA/Dec = 13:14:30.4 +20:01:01.8 2010-Jan-13 06:10:22 NOTE fixed_driftmap: Correcting ZA to 1:39:48.1 ... 2010-Jan-13 06:10:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6633524113 -CF 2010-Jan-13 06:10:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:10:22 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:10:22 LOG5 begin_task: Level: (2) ID = <10401> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:10:22 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:10:22 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:10:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:10:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:10:22 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:10:22 LOG5 begin_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6633524113 -CF 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:10:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:10:22 LOG5 end_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:10:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:10:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:10:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:10:22 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2010-Jan-13 06:10:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:10:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:10:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:10:23 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:10:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:10:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:10:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:10:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:10:23 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:10:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:10:23 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:10:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:10:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:10:23 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:10:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:10:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:10:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:10:23 LOG5 begin_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:10:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:10:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:10:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:10:23 LOG5 end_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:10:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:10:23 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:10:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:10:23 INFO2 take_data: Starting WAPP 1-second scan: 1300104 2010-Jan-13 06:10:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:10:23 LOG5 begin_task: Level: (4) ID = <10408> Status = 0 0 0 0 ok 2010-Jan-13 06:10:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:10:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:10:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36624.00 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:10:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:10:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:10:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:10:25 LOG5 end_task: Level: (4) ID = <10408> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:10:25 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:10:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:10:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:10:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:10:25 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:10:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:10:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:10:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:10:25 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:10:25 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:10:25 LOG5 finish_task: Level: (2) ID = <10401> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:10:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:10:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:10:25 LOG5 end_task: Level: (2) ID = <10401> Status = 0 0 0 0 ok 2010-Jan-13 06:10:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2010-Jan-13 06:10:25 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2010-Jan-13 06:10:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:10:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:10:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:10:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:10:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:10:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:10:26 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:10:26 LOG5 begin_task: Level: (2) ID = <10410> Status = 0 0 0 0 ok 2010-Jan-13 06:10:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:10:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:10:26 INFO2 take_data: Starting WAPP 600-second scan: 1300105 2010-Jan-13 06:10:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:10:26 LOG5 begin_task: Level: (3) ID = <10411> Status = 0 0 0 0 ok 2010-Jan-13 06:10:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:10:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:10:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:10:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0027.fits 2010-Jan-13 06:10:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36627.00 2010-Jan-13 06:10:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0027.fits} 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:10:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:11:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:11:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6729 RA/Dec = 13:15:20 +20:04:30 2010-Jan-13 06:13:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:13:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6729 RA/Dec = 13:16:51 +20:04:29 2010-Jan-13 06:14:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:14:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6729 RA/Dec = 13:18:21 +20:04:29 2010-Jan-13 06:16:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:16:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6729 RA/Dec = 13:19:51 +20:04:28 2010-Jan-13 06:17:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:17:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6729 RA/Dec = 13:21:21 +20:04:28 2010-Jan-13 06:19:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:19:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6729 RA/Dec = 13:22:52 +20:04:27 2010-Jan-13 06:20:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:20:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:20:27 LOG5 end_task: Level: (3) ID = <10411> Status = 0 0 0 0 ok 2010-Jan-13 06:20:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:20:27 LOG5 end_task: Level: (2) ID = <10410> Status = 0 0 0 0 ok 2010-Jan-13 06:20:27 LOG1 fixed_driftmap: New position: year = 2010.0363154042134 RA = 13:24:06.9 RA/Dec = 13:24:37.1 +20:01:04.8 2010-Jan-13 06:20:27 NOTE fixed_driftmap: Correcting ZA to 1:39:51.0 ... 2010-Jan-13 06:20:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6641801395 -CF 2010-Jan-13 06:20:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:20:27 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:20:27 LOG5 begin_task: Level: (2) ID = <10412> Status = 0 0 0 0 ok 2010-Jan-13 06:20:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:20:27 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:20:27 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-Jan-13 06:20:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:20:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:20:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:20:27 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:20:27 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-Jan-13 06:20:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6641801395 -CF 2010-Jan-13 06:20:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:20:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:20:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:20:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:20:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:20:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:20:28 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:20:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:20:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:20:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:20:28 LOG5 begin_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:20:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:20:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:20:28 LOG5 end_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:20:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:20:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:20:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:20:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:20:28 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:20:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:20:28 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:20:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:20:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:20:28 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:20:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:20:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:20:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:20:28 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:20:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:20:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:20:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:20:28 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:20:28 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:20:28 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:20:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:20:28 INFO2 take_data: Starting WAPP 1-second scan: 1300106 2010-Jan-13 06:20:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:20:28 LOG5 begin_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2010-Jan-13 06:20:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:20:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:20:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37229.00 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:20:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:20:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:20:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:20:30 LOG5 end_task: Level: (4) ID = <10419> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:20:30 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:20:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:20:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:20:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:20:30 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:20:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:20:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:20:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:20:30 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:20:30 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:20:30 LOG5 finish_task: Level: (2) ID = <10412> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:20:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:20:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:20:30 LOG5 end_task: Level: (2) ID = <10412> Status = 0 0 0 0 ok 2010-Jan-13 06:20:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2010-Jan-13 06:20:30 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2010-Jan-13 06:20:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:20:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:20:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:20:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:20:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:20:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:20:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:20:31 LOG5 begin_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2010-Jan-13 06:20:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:20:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:20:31 INFO2 take_data: Starting WAPP 600-second scan: 1300107 2010-Jan-13 06:20:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:20:31 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2010-Jan-13 06:20:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:20:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:20:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:20:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37232.00 2010-Jan-13 06:20:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0028.fits 2010-Jan-13 06:20:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0028.fits} 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:20:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:20:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6738 RA/Dec = 13:24:22 +20:04:30 2010-Jan-13 06:22:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:22:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6738 RA/Dec = 13:25:52 +20:04:30 2010-Jan-13 06:23:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:23:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6738 RA/Dec = 13:27:23 +20:04:29 2010-Jan-13 06:25:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:25:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6738 RA/Dec = 13:28:53 +20:04:29 2010-Jan-13 06:26:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:26:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6738 RA/Dec = 13:30:23 +20:04:28 2010-Jan-13 06:28:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:28:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6738 RA/Dec = 13:31:53 +20:04:28 2010-Jan-13 06:29:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:29:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6738 RA/Dec = 13:33:24 +20:04:27 2010-Jan-13 06:30:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:30:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:30:32 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:30:32 LOG5 end_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 LOG1 fixed_driftmap: New position: year = 2010.0363345755065 RA = 13:34:13.8 RA/Dec = 13:34:43.7 +20:01:08.1 2010-Jan-13 06:30:32 NOTE fixed_driftmap: Correcting ZA to 1:39:54.4 ... 2010-Jan-13 06:30:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6651171412 -CF 2010-Jan-13 06:30:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:30:32 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:30:32 LOG5 begin_task: Level: (2) ID = <10423> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:30:32 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:30:32 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:30:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:30:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:30:32 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:30:32 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6651171412 -CF 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:30:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:30:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:30:32 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-Jan-13 06:30:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:30:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:30:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:30:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:30:33 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:30:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:30:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:30:33 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:30:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:30:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:30:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:30:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:30:33 LOG5 begin_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:30:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:30:33 LOG5 end_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:30:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:30:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:30:33 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:30:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:30:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:30:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:30:33 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:30:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:30:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:30:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:30:33 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:30:33 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:30:33 LOG5 begin_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:30:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:30:33 INFO2 take_data: Starting WAPP 1-second scan: 1300108 2010-Jan-13 06:30:33 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:30:33 LOG5 begin_task: Level: (4) ID = <10430> Status = 0 0 0 0 ok 2010-Jan-13 06:30:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:30:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37834.00 2010-Jan-13 06:30:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:30:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:30:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:30:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:30:35 LOG5 end_task: Level: (4) ID = <10430> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:30:35 LOG5 end_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:30:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:30:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:30:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:30:35 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:30:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:30:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:30:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:30:35 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:30:35 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:30:35 LOG5 finish_task: Level: (2) ID = <10423> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:30:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:30:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:30:35 LOG5 end_task: Level: (2) ID = <10423> Status = 0 0 0 0 ok 2010-Jan-13 06:30:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2010-Jan-13 06:30:35 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2010-Jan-13 06:30:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:30:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:30:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:30:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:30:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:30:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:30:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:30:36 LOG5 begin_task: Level: (2) ID = <10432> Status = 0 0 0 0 ok 2010-Jan-13 06:30:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:30:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:30:36 INFO2 take_data: Starting WAPP 600-second scan: 1300109 2010-Jan-13 06:30:36 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:30:36 LOG5 begin_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2010-Jan-13 06:30:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:30:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:30:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:30:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37837.00 2010-Jan-13 06:30:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0029.fits 2010-Jan-13 06:30:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0029.fits} 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:31:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:31:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8956 1.6747 RA/Dec = 13:34:54 +20:04:30 2010-Jan-13 06:32:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:32:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6747 RA/Dec = 13:36:25 +20:04:29 2010-Jan-13 06:34:13 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:34:13 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6747 RA/Dec = 13:37:56 +20:04:29 2010-Jan-13 06:35:43 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:35:43 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6747 RA/Dec = 13:39:26 +20:04:28 2010-Jan-13 06:37:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:37:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6747 RA/Dec = 13:40:56 +20:04:28 2010-Jan-13 06:38:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:38:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6747 RA/Dec = 13:42:26 +20:04:27 2010-Jan-13 06:40:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.67) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:40:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6747 RA/Dec = 13:43:57 +20:04:26 2010-Jan-13 06:40:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:40:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:40:37 LOG5 end_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:40:37 LOG5 end_task: Level: (2) ID = <10432> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG1 fixed_driftmap: New position: year = 2010.0363537467997 RA = 13:44:20.8 RA/Dec = 13:44:50.4 +20:01:11.9 2010-Jan-13 06:40:37 NOTE fixed_driftmap: Correcting ZA to 1:39:58.2 ... 2010-Jan-13 06:40:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6661616036 -CF 2010-Jan-13 06:40:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:40:37 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:40:37 LOG5 begin_task: Level: (2) ID = <10434> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:40:37 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:40:37 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:40:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:40:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:40:37 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:40:37 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6661616036 -CF 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:40:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:40:37 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:40:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:40:37 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:40:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:40:37 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2010-Jan-13 06:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:40:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:40:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:40:38 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:40:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:40:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:40:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:40:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:40:38 LOG5 begin_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:40:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:40:38 LOG5 end_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:40:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:40:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:40:38 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:40:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:40:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:40:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:40:38 LOG5 begin_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:40:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:40:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:40:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:40:38 LOG5 end_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:40:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:40:38 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:40:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:40:38 INFO2 take_data: Starting WAPP 1-second scan: 1300110 2010-Jan-13 06:40:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:40:38 LOG5 begin_task: Level: (4) ID = <10441> Status = 0 0 0 0 ok 2010-Jan-13 06:40:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:40:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:40:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38439.00 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:40:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:40:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:40:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:40:40 LOG5 end_task: Level: (4) ID = <10441> Status = 0 0 0 0 ok 2010-Jan-13 06:40:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:40:40 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-Jan-13 06:40:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:40:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:40:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:40:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:40:40 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-Jan-13 06:40:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:40:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:40:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:40:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:40:40 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:40:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:40:41 LOG5 finish_task: Level: (2) ID = <10434> Status = 0 0 0 0 ok 2010-Jan-13 06:40:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:40:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:40:41 LOG5 end_task: Level: (2) ID = <10434> Status = 0 0 0 0 ok 2010-Jan-13 06:40:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2010-Jan-13 06:40:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:40:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:40:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:40:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:40:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:40:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:40:41 LOG5 begin_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:40:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:40:41 INFO2 take_data: Starting WAPP 600-second scan: 1300111 2010-Jan-13 06:40:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:40:41 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2010-Jan-13 06:40:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:40:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:40:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38442.00 2010-Jan-13 06:40:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0030.fits 2010-Jan-13 06:40:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0030.fits} 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:40:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:41:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:41:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8954 1.6757 RA/Dec = 13:45:28 +20:04:30 2010-Jan-13 06:43:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:43:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6757 RA/Dec = 13:46:58 +20:04:29 2010-Jan-13 06:44:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:44:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6757 RA/Dec = 13:48:29 +20:04:28 2010-Jan-13 06:46:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:46:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6758 RA/Dec = 13:49:59 +20:04:28 2010-Jan-13 06:47:45 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:47:45 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6757 RA/Dec = 13:51:29 +20:04:27 2010-Jan-13 06:49:15 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:49:15 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6757 RA/Dec = 13:52:59 +20:04:27 2010-Jan-13 06:50:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:50:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:50:42 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2010-Jan-13 06:50:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:50:42 LOG5 end_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2010-Jan-13 06:50:42 LOG1 fixed_driftmap: New position: year = 2010.0363729180926 RA = 13:54:27.7 RA/Dec = 13:54:57.0 +20:01:16.0 2010-Jan-13 06:50:42 NOTE fixed_driftmap: Correcting ZA to 1:40:02.3 ... 2010-Jan-13 06:50:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6673114883 -CF 2010-Jan-13 06:50:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 06:50:42 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 06:50:42 LOG5 begin_task: Level: (2) ID = <10445> Status = 0 0 0 0 ok 2010-Jan-13 06:50:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 06:50:42 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 06:50:42 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-Jan-13 06:50:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 06:50:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 06:50:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:50:42 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 06:50:42 LOG5 begin_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-Jan-13 06:50:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6673114883 -CF 2010-Jan-13 06:50:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:50:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 06:50:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 06:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:50:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 06:50:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 06:50:43 LOG5 end_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 06:50:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:50:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 06:50:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:50:43 LOG5 begin_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 06:50:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:50:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:50:43 LOG5 end_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:50:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 06:50:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 06:50:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:50:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 06:50:43 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 06:50:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 06:50:43 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 06:50:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 06:50:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 06:50:43 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 06:50:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 06:50:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 06:50:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:50:43 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:50:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 06:50:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:50:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:50:43 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 06:50:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:50:43 LOG5 begin_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2010-Jan-13 06:50:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 06:50:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:50:43 INFO2 take_data: Starting WAPP 1-second scan: 1300112 2010-Jan-13 06:50:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:50:44 LOG5 begin_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2010-Jan-13 06:50:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:50:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 06:50:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39045.00 2010-Jan-13 06:50:45 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:50:45 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6769 RA/Dec = 13:54:31 +20:04:30 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:50:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:50:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 06:50:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 06:50:46 LOG5 end_task: Level: (4) ID = <10452> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 06:50:46 LOG5 end_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 06:50:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 06:50:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 06:50:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 06:50:46 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 06:50:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 06:50:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 06:50:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 06:50:46 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 06:50:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 06:50:46 LOG5 finish_task: Level: (2) ID = <10445> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 06:50:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 06:50:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 06:50:46 LOG5 end_task: Level: (2) ID = <10445> Status = 0 0 0 0 ok 2010-Jan-13 06:50:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2010-Jan-13 06:50:46 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2010-Jan-13 06:50:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 06:50:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 06:50:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 06:50:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 06:50:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 06:50:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 06:50:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 06:50:47 LOG5 begin_task: Level: (2) ID = <10454> Status = 0 0 0 0 ok 2010-Jan-13 06:50:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 06:50:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 06:50:47 INFO2 take_data: Starting WAPP 600-second scan: 1300113 2010-Jan-13 06:50:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 06:50:47 LOG5 begin_task: Level: (3) ID = <10455> Status = 0 0 0 0 ok 2010-Jan-13 06:50:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 06:50:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 06:50:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 06:50:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39048.00 2010-Jan-13 06:50:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0031.fits 2010-Jan-13 06:50:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0031.fits} 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:50:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 06:52:15 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:52:15 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6769 RA/Dec = 13:56:01 +20:04:29 2010-Jan-13 06:53:45 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:53:45 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6769 RA/Dec = 13:57:31 +20:04:29 2010-Jan-13 06:55:15 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:55:15 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6769 RA/Dec = 13:59:02 +20:04:28 2010-Jan-13 06:56:46 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:56:46 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6769 RA/Dec = 14:00:32 +20:04:27 2010-Jan-13 06:58:16 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:58:16 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6769 RA/Dec = 14:02:02 +20:04:27 2010-Jan-13 06:59:46 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 06:59:46 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6769 RA/Dec = 14:03:32 +20:04:26 2010-Jan-13 07:00:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:00:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 07:00:48 LOG5 end_task: Level: (3) ID = <10455> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 07:00:48 LOG5 end_task: Level: (2) ID = <10454> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 LOG1 fixed_driftmap: New position: year = 2010.036392121074 RA = 14:04:35.6 RA/Dec = 14:05:04.7 +20:01:20.5 2010-Jan-13 07:00:48 NOTE fixed_driftmap: Correcting ZA to 1:40:06.8 ... 2010-Jan-13 07:00:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6685667076 -CF 2010-Jan-13 07:00:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 07:00:48 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 07:00:48 LOG5 begin_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 07:00:48 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 07:00:48 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 07:00:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 07:00:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:00:48 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 07:00:48 LOG5 begin_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6685667076 -CF 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:00:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 07:00:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 07:00:48 LOG5 end_task: Level: (4) ID = <10458> Status = 0 0 0 0 ok 2010-Jan-13 07:00:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 07:00:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:00:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 07:00:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:00:48 LOG5 begin_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:00:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:00:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:00:49 LOG5 end_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:00:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 07:00:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:00:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:00:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:00:49 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:00:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:00:49 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:00:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:00:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 07:00:49 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 07:00:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 07:00:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 07:00:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:00:49 LOG5 begin_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:00:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 07:00:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:00:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:00:49 LOG5 end_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 07:00:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 07:00:49 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 07:00:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 07:00:49 INFO2 take_data: Starting WAPP 1-second scan: 1300114 2010-Jan-13 07:00:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 07:00:49 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2010-Jan-13 07:00:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:00:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 07:00:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39650.00 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:00:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:00:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:00:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 07:00:51 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 07:00:51 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 07:00:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:00:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:00:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:00:51 LOG5 begin_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:00:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:00:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:00:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:00:51 LOG5 end_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 07:00:51 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 07:00:51 LOG5 finish_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 07:00:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:00:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 07:00:51 LOG5 end_task: Level: (2) ID = <10456> Status = 0 0 0 0 ok 2010-Jan-13 07:00:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2010-Jan-13 07:00:51 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2010-Jan-13 07:00:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 07:00:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 07:00:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 07:00:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 07:00:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 07:00:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 07:00:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 07:00:52 LOG5 begin_task: Level: (2) ID = <10465> Status = 0 0 0 0 ok 2010-Jan-13 07:00:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 07:00:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 07:00:52 INFO2 take_data: Starting WAPP 600-second scan: 1300115 2010-Jan-13 07:00:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 07:00:52 LOG5 begin_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2010-Jan-13 07:00:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 07:00:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:00:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 07:00:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39653.00 2010-Jan-13 07:00:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0032.fits 2010-Jan-13 07:00:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0032.fits} 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:00:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:01:16 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:01:16 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6782 RA/Dec = 14:05:04 +20:04:30 2010-Jan-13 07:02:47 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:02:47 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6782 RA/Dec = 14:06:34 +20:04:29 2010-Jan-13 07:04:17 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:04:17 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6782 RA/Dec = 14:08:04 +20:04:28 2010-Jan-13 07:05:47 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:05:47 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8953 1.6782 RA/Dec = 14:09:36 +20:04:28 2010-Jan-13 07:07:17 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:07:17 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6782 RA/Dec = 14:11:06 +20:04:27 2010-Jan-13 07:08:47 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:08:47 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6782 RA/Dec = 14:12:36 +20:04:26 2010-Jan-13 07:10:17 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:10:18 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8951 1.6782 RA/Dec = 14:14:06 +20:04:26 2010-Jan-13 07:10:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:10:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 07:10:53 LOG5 end_task: Level: (3) ID = <10466> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 07:10:53 LOG5 end_task: Level: (2) ID = <10465> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 LOG1 fixed_driftmap: New position: year = 2010.0364112923671 RA = 14:14:42.5 RA/Dec = 14:15:11.4 +20:01:25.4 2010-Jan-13 07:10:53 NOTE fixed_driftmap: Correcting ZA to 1:40:11.7 ... 2010-Jan-13 07:10:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 1.6699206698 -CF 2010-Jan-13 07:10:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Jan-13 07:10:53 START begin_task: Starting task 'WAPP calibration' 2010-Jan-13 07:10:53 LOG5 begin_task: Level: (2) ID = <10467> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Jan-13 07:10:53 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 07:10:53 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 07:10:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 07:10:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:10:53 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 07:10:53 LOG5 begin_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 1.6699206698 -CF 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:10:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 07:10:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 07:10:53 LOG5 end_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-Jan-13 07:10:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 07:10:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:10:53 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 07:10:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:10:53 LOG5 begin_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:10:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:10:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:10:54 LOG5 end_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:10:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 07:10:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:10:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:10:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:10:54 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:10:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:10:54 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:10:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:10:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 07:10:54 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-13 07:10:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 07:10:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 07:10:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:10:54 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:10:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 07:10:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:10:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:10:54 LOG5 end_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-13 07:10:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 07:10:54 LOG5 begin_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2010-Jan-13 07:10:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-13 07:10:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 07:10:54 INFO2 take_data: Starting WAPP 1-second scan: 1300116 2010-Jan-13 07:10:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 07:10:55 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2010-Jan-13 07:10:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:10:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-13 07:10:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40256.00 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:10:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:10:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:10:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Jan-13 07:10:57 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Jan-13 07:10:57 LOG5 end_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 07:10:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:10:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:10:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:10:57 LOG5 begin_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:10:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:10:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:10:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:10:57 LOG5 end_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 07:10:57 STOP finish_task: Finishing task 'WAPP calibration' 2010-Jan-13 07:10:57 LOG5 finish_task: Level: (2) ID = <10467> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Jan-13 07:10:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:10:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Jan-13 07:10:57 LOG5 end_task: Level: (2) ID = <10467> Status = 0 0 0 0 ok 2010-Jan-13 07:10:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2010-Jan-13 07:10:57 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2010-Jan-13 07:10:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 07:10:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 07:10:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 07:10:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 07:10:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Jan-13 07:10:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-13 07:10:58 START begin_task: Starting task 'WAPP spectral observation' 2010-Jan-13 07:10:58 LOG5 begin_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-Jan-13 07:10:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-13 07:10:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-13 07:10:58 INFO2 take_data: Starting WAPP 600-second scan: 1300117 2010-Jan-13 07:10:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Jan-13 07:10:58 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2010-Jan-13 07:10:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 07:10:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:10:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-13 07:10:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40259.00 2010-Jan-13 07:10:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0033.fits 2010-Jan-13 07:10:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0033.fits} 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:11:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:11:10 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-Jan-13 07:11:10 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-Jan-13 07:11:10 WARNING abort_task: WARNING abort requested! 2010-Jan-13 07:11:10 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2010-Jan-13 07:11:10 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2010-Jan-13 07:11:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2010-Jan-13 07:11:10 LOG5 end_task: Level: (3) ID = <10477> Status = 1 0 0 0 abort 2010-Jan-13 07:11:10 LOG4 stop_backends: Calling 'stop_backends' 2010-Jan-13 07:11:10 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-13 07:11:10 LOG5 begin_task: Level: (3) ID = <10478> Status = 1 0 0 0 abort 2010-Jan-13 07:11:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-13 07:11:10 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-13 07:11:10 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-13 07:11:10 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-13 07:11:10 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-13 07:11:10 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-13 07:11:10 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-13 07:11:10 LOG5 begin_task: Level: (4) ID = <10479> Status = 1 0 0 0 abort 2010-Jan-13 07:11:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-13 07:11:11 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2010-Jan-13 07:11:12 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2010-Jan-13 07:11:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:11:12 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2010-Jan-13 07:11:12 LOG5 end_task: Level: (4) ID = <10479> Status = 1 0 0 0 abort 2010-Jan-13 07:11:12 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2010-Jan-13 07:11:12 LOG5 end_task: Level: (3) ID = <10478> Status = 1 0 0 0 abort 2010-Jan-13 07:11:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2010-Jan-13 07:11:12 LOG5 end_task: Level: (2) ID = <10476> Status = 1 0 0 0 abort 2010-Jan-13 07:11:12 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-13 07:11:12 LOG5 finish_task: Level: (1) ID = <10108> Status = 1 0 0 0 abort 2010-Jan-13 07:11:12 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-Jan-13 07:11:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-Jan-13 07:11:12 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-Jan-13 07:11:12 LOG5 end_task: Level: (1) ID = <10108> Status = 1 0 0 0 abort 2010-Jan-13 07:11:32 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-13 07:11:32 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-13 07:11:32 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-13 07:11:32 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-13 07:11:32 LOG5 begin_task: Level: (1) ID = <10480> Status = 0 0 0 0 ok 2010-Jan-13 07:11:32 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-13 07:11:32 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-13 07:11:32 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-13 07:11:32 LOG5 end_task: Level: (1) ID = <10480> Status = 0 0 0 0 ok 2010-Jan-13 07:11:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-13 07:11:32 LOG3 exec_msg: Closing socket 2010-Jan-13 07:11:32 LOG3 exec_msg: Closing socket 2010-Jan-13 07:11:32 LOG3 exec_msg: Closing socket 2010-Jan-13 07:11:32 LOG3 exec_msg: Closing socket 2010-Jan-13 07:11:34 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-13 07:11:35 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-13 07:11:35 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-13 07:11:35 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-13 07:11:48 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.68) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:11:48 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 539.8950 1.6795 RA/Dec = 14:15:37 +20:04:30 2010-Jan-13 07:12:02 INFO4 CIMA-load_command_file: Loaded command file 'command_galfacurpos10.cmd' 2010-Jan-13 07:12:05 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos10.cmd' to executive ... 2010-Jan-13 07:12:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 8 {LOAD togs_10.conf} 2010-Jan-13 07:12:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 9 {TRACKCURPOS} 2010-Jan-13 07:12:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 10 {ALFAANGLE 19} 2010-Jan-13 07:12:05 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 14 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Jan-13 07:12:05 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-13 07:12:05 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos10.cmd 1 1 4 2010-Jan-13 07:12:05 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos10.cmd 1 1 4' 2010-Jan-13 07:12:05 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos10.cmd'' 2010-Jan-13 07:12:05 LOG5 begin_task: Level: (1) ID = <10481> Status = 0 0 0 0 ok 2010-Jan-13 07:12:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos10.cmd' ...} 2010-Jan-13 07:12:06 NOTE run_command_file: Starting execution of command file 'command_galfacurpos10.cmd' from line 1 2010-Jan-13 07:12:06 COMMAND run_command_line: EXECUTING command 8: 'LOAD togs_10.conf' 2010-Jan-13 07:12:06 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 07:12:06 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-13 07:12:06 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Jan-13 07:12:06 LOG2 CIMA-antvel: Precessing RA = 08:50:00.0 Dec = +20:04:30.0 Epoch = 2010.03641 J 2010-Jan-13 07:12:06 LOG2 CIMA-antvel: Computed apparent RA = 08:50:37.0 Dec = +20:02:05.8 2010-Jan-13 07:12:06 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 40325 2010 13 0.0 2010-Jan-13 07:12:06 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Jan-13 07:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 07:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-13 07:12:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 07:12:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-13 07:12:08 LOG5 begin_task: Level: (2) ID = <10482> Status = 0 0 0 0 ok 2010-Jan-13 07:12:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-13 07:12:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-13 07:12:08 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-13 07:12:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:12:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:12:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:12:08 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2010-Jan-13 07:12:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:12:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:12:08 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2010-Jan-13 07:12:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:12:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:12:08 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-13 07:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-13 07:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-13 07:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-13 07:12:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-13 07:12:08 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-13 07:12:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-13 07:12:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-13 07:12:08 LOG5 begin_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-13 07:12:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-13 07:12:09 LOG5 end_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-13 07:12:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-13 07:12:09 LOG5 finish_task: Level: (2) ID = <10482> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-13 07:12:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:12:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-13 07:12:09 LOG5 end_task: Level: (2) ID = <10482> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-13 07:12:09 LOG5 begin_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-13 07:12:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-13 07:12:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-13 07:12:09 START begin_task: Starting task 'selecting calibration port' 2010-Jan-13 07:12:09 LOG5 begin_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-13 07:12:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-13 07:12:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:09 START begin_task: Starting task 'waiting on calport' 2010-Jan-13 07:12:09 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 07:12:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-13 07:12:09 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-13 07:12:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-13 07:12:09 LOG5 end_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:12:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:12:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:12:09 LOG5 begin_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:12:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:12:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:12:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:12:09 LOG5 end_task: Level: (3) ID = <10488> Status = 0 0 0 0 ok 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 07:12:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 07:12:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-13 07:12:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-13 07:12:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:12:09 LOG5 begin_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-13 07:12:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:12:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-13 07:12:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:12:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 07:12:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:12:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:12:10 LOG5 end_task: Level: (3) ID = <10489> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-13 07:12:10 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-13 07:12:10 LOG5 finish_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-13 07:12:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:12:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-13 07:12:10 LOG5 end_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 COMMAND run_command_line: EXECUTING command 9: 'TRACKCURPOS' 2010-Jan-13 07:12:10 BEGIN begin_task: Starting task 'tracking current position' 2010-Jan-13 07:12:10 LOG5 begin_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Jan-13 07:12:10 INFO1 track_current_pos: Starting to track the current commanded position RA = 14:15:58.7 and Dec = +20:04:29.4 2010-Jan-13 07:12:10 LOG3 track_source: Calling 'track_source Cur-pos 141558.7 200429.4 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Jan-13 07:12:10 START begin_task: Starting task 'sending tracking commands' 2010-Jan-13 07:12:10 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Jan-13 07:12:10 INFO1 track_source: Starting to track Cur-pos 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: set ra 141558.7 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: set dec 200429.4 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: pnt tr 141558.7 200429.4 -CJ 2010-Jan-13 07:12:10 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-13 07:12:10 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-13 07:12:10 LOG5 finish_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-13 07:12:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:12:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-13 07:12:10 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 START begin_task: Starting task 'waiting on telescope' 2010-Jan-13 07:12:10 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-13 07:12:10 LOG3 waittrk: Start waittrk 5 2010-Jan-13 07:12:10 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-13 07:12:10 LOG5 begin_task: Level: (4) ID = <10493> Status = 0 0 0 0 ok 2010-Jan-13 07:12:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: set ra 141558.7 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: set dec 200429.4 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: vw% 141558.7 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: vw% 200429.4 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: pnt tr 141558.7 200429.4 -CJ 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-13 07:12:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-13 07:12:15 LOG5 end_task: Level: (4) ID = <10493> Status = 0 0 0 0 ok 2010-Jan-13 07:12:15 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-13 07:12:15 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-Jan-13 07:12:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-13 07:12:25 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-Jan-13 07:12:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-13 07:12:25 INFO2 waittrk: Now tracking Cur-pos 2010-Jan-13 07:12:25 LOG4 waittrk: Current telescope position: Az = 537.73 ZA = 1.68 2010-Jan-13 07:12:25 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-13 07:12:25 LOG5 finish_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2010-Jan-13 07:12:25 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-13 07:12:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:12:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-13 07:12:26 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2010-Jan-13 07:12:26 STOP finish_task: Finishing task 'tracking current position' 2010-Jan-13 07:12:26 LOG5 finish_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2010-Jan-13 07:12:26 DONE finish_task: DONE finished tracking: current position 2010-Jan-13 07:12:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:12:26 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Jan-13 07:12:26 LOG5 end_task: Level: (2) ID = <10490> Status = 0 0 0 0 ok 2010-Jan-13 07:12:26 COMMAND run_command_line: EXECUTING command 10: 'ALFAANGLE 19' 2010-Jan-13 07:12:26 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-13 07:12:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-13 07:12:26 LOG5 begin_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Jan-13 07:12:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-13 07:12:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-13 07:12:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-13 07:12:26 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-13 07:12:26 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-13 07:12:26 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-13 07:12:27 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-13 07:12:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-13 07:12:27 LOG5 end_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-13 07:12:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-13 07:12:27 LOG5 finish_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-13 07:12:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:12:27 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-13 07:12:27 LOG5 end_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 COMMAND run_command_line: EXECUTING command 14: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Jan-13 07:12:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-13 07:12:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-13 07:12:27 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Jan-13 07:12:27 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-13 07:12:27 LOG5 begin_task: Level: (2) ID = <10497> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Jan-13 07:12:27 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-13 07:12:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-13 07:12:27 START begin_task: Starting task 'selecting calibration type' 2010-Jan-13 07:12:27 LOG5 begin_task: Level: (3) ID = <10498> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-13 07:12:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-13 07:12:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:27 START begin_task: Starting task 'waiting on setcal' 2010-Jan-13 07:12:27 LOG5 begin_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-13 07:12:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 07:12:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-13 07:12:27 LOG5 end_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-13 07:12:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:12:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-13 07:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:12:27 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:12:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:12:27 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-Jan-13 07:12:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:12:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-13 07:12:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-13 07:12:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-13 07:12:27 LOG5 begin_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-13 07:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-13 07:12:28 LOG5 end_task: Level: (4) ID = <10501> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-13 07:12:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-13 07:12:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-13 07:12:28 LOG5 end_task: Level: (3) ID = <10498> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Tom 2010-Jan-13 07:12:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Tom 2010-Jan-13 07:12:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Tom 2010-Jan-13 07:12:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Tom 2010-Jan-13 07:12:28 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-13 07:12:28 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-13 07:12:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 07:12:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:12:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:12:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:12:28 LOG5 begin_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Tom' 2010-Jan-13 07:12:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:12:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:12:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:12:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:12:28 LOG5 end_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-13 07:12:28 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 07:12:28 LOG5 begin_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-13 07:12:28 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-13 07:12:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-13 07:12:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-13 07:12:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:28 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-13 07:12:28 LOG5 begin_task: Level: (4) ID = <10504> Status = 0 0 0 0 ok 2010-Jan-13 07:12:28 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-13 07:12:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-13 07:12:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100113.a2010.0034.fits 2010-Jan-13 07:12:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100113.a2010.0034.fits} 2010-Jan-13 07:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-13 07:12:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-13 07:12:31 LOG5 end_task: Level: (4) ID = <10504> Status = 0 0 0 0 ok 2010-Jan-13 07:12:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-13 07:12:31 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-13 07:12:31 LOG5 begin_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2010-Jan-13 07:12:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-13 07:12:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 07:12:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 07:12:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 07:12:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-13 07:12:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-13 07:12:31 LOG5 begin_task: Level: (5) ID = <10506> Status = 0 0 0 0 ok 2010-Jan-13 07:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-13 07:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2010-Jan-13 07:12:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-13 07:12:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-13 07:12:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 1 dB --- beam 7: 4 1 dB 2010-Jan-13 07:12:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-13 07:12:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-13 07:12:31 LOG5 end_task: Level: (5) ID = <10506> Status = 0 0 0 0 ok 2010-Jan-13 07:12:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 1.100 ALFA beam 1: 1.103 0.911 2010-Jan-13 07:12:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.922 1.002 ALFA beam 3: 1.024 0.885 2010-Jan-13 07:12:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.032 1.007 ALFA beam 5: 1.018 1.067 2010-Jan-13 07:12:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 0.875 ALFA beam 7: 0.885 1.033 2010-Jan-13 07:12:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 07:12:31 LOG5 finish_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2010-Jan-13 07:12:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-13 07:12:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:12:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 07:12:31 LOG5 end_task: Level: (4) ID = <10505> Status = 0 0 0 0 ok 2010-Jan-13 07:12:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-13 07:12:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-13 07:12:32 LOG5 finish_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-Jan-13 07:12:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-13 07:12:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-13 07:12:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-13 07:12:32 LOG5 end_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-Jan-13 07:12:32 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Jan-13 07:12:32 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:12:32 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 07:12:32 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:12:32 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03641 J 2010-Jan-13 07:12:32 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:12:32 LOG2 antvel: Parameters to Doppler: Topocentric 40351 2010 13 0.0 2010-Jan-13 07:12:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:12:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 07:12:32 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 07:12:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:12:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:12:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:12:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Jan-13 07:12:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:12:32 LOG5 begin_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2010-Jan-13 07:12:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:12:32 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.280155 2010.0364143977997 18.999933 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555535 20.074833333333331 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 1 14.267840725677910 19.971002152849696 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 2 14.272434095671594 20.042237640284853 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 3 14.271154066013393 20.146875083634232 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 4 14.264614551985964 20.178369729345100 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 5 14.259937058255613 20.102751995453861 2010-Jan-13 07:12:32 LOG4 log_alfabeam: ALFABEAM 6 14.261879503843202 20.000222967149064 2010-Jan-13 07:12:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300118 2010-Jan-13 07:12:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:12:32 LOG5 begin_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2010-Jan-13 07:12:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:12:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:12:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:12:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40353.00 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:12:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:12:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:12:43 LOG5 end_task: Level: (4) ID = <10508> Status = 0 0 0 0 ok 2010-Jan-13 07:12:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:12:43 LOG5 end_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2010-Jan-13 07:12:43 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Jan-13 07:12:43 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:12:43 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 07:12:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:12:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03641 J 2010-Jan-13 07:12:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:12:43 LOG2 antvel: Parameters to Doppler: Topocentric 40363 2010 13 0.0 2010-Jan-13 07:12:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:12:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 07:12:43 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 07:12:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:12:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:12:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:12:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Jan-13 07:12:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:12:43 LOG5 begin_task: Level: (3) ID = <10509> Status = 0 0 0 0 ok 2010-Jan-13 07:12:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:12:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.283498 2010.0364147780567 18.999933 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555693 20.074833333333316 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 1 14.268048666791994 19.971656044919634 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 2 14.272497366860385 20.044698173778123 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 3 14.271007002258305 20.148781613966083 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 4 14.264407280079576 20.177654422120330 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 5 14.259883773985605 20.100206343621554 2010-Jan-13 07:12:43 LOG4 log_alfabeam: ALFABEAM 6 14.262030693501060 19.998490227445327 2010-Jan-13 07:12:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300119 2010-Jan-13 07:12:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:12:44 LOG5 begin_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2010-Jan-13 07:12:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:12:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:12:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:12:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40365.00 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:12:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:12:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:12:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:12:55 LOG5 end_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2010-Jan-13 07:12:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:12:55 LOG5 end_task: Level: (3) ID = <10509> Status = 0 0 0 0 ok 2010-Jan-13 07:12:55 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Jan-13 07:12:55 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:12:55 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 07:12:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:12:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:12:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:12:55 LOG2 antvel: Parameters to Doppler: Topocentric 40375 2010 13 0.0 2010-Jan-13 07:12:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:12:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 07:12:55 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 07:12:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:12:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:12:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:12:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Jan-13 07:12:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:12:55 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2010-Jan-13 07:12:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:12:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.286840 2010.0364151583137 18.999933 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555748 20.074833333333338 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 1 14.268254301658382 19.972389115374739 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 2 14.272555492214030 20.047173071202533 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 3 14.270856712294105 20.150620979392428 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 4 14.264202557474503 20.176860952557934 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 5 14.259835913745214 20.097654658208544 2010-Jan-13 07:12:55 LOG4 log_alfabeam: ALFABEAM 6 14.262184387088979 19.996826818348609 2010-Jan-13 07:12:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300120 2010-Jan-13 07:12:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:12:56 LOG5 begin_task: Level: (4) ID = <10512> Status = 0 0 0 0 ok 2010-Jan-13 07:12:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:12:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:12:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:12:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:12:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:12:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40377.00 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:12:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:13:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:13:07 LOG5 end_task: Level: (4) ID = <10512> Status = 0 0 0 0 ok 2010-Jan-13 07:13:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:13:07 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2010-Jan-13 07:13:07 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Jan-13 07:13:07 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:13:07 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 07:13:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:13:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:13:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:13:07 LOG2 antvel: Parameters to Doppler: Topocentric 40387 2010 13 0.0 2010-Jan-13 07:13:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:13:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 07:13:07 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 07:13:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:13:07 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:13:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:13:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Jan-13 07:13:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:13:07 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2010-Jan-13 07:13:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:13:07 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.290183 2010.036415538571 18.999933 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555716 20.074833333333338 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 1 14.268457298479781 19.973198901227288 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 2 14.272608436228932 20.049657794725626 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 3 14.270703509427980 20.152390736949975 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 4 14.264000708434009 20.175992016581205 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 5 14.259793466452509 20.095101663471112 2010-Jan-13 07:13:07 LOG4 log_alfabeam: ALFABEAM 6 14.262340268522532 19.995234424656640 2010-Jan-13 07:13:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300121 2010-Jan-13 07:13:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:13:08 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2010-Jan-13 07:13:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:13:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:13:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:13:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40389.00 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:18 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.70) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:13:18 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 530.8016 1.6991 RA/Dec = 14:15:59 +20:04:29 2010-Jan-13 07:13:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:13:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:13:19 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2010-Jan-13 07:13:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:13:19 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2010-Jan-13 07:13:19 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Jan-13 07:13:19 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:13:19 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 07:13:19 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:13:19 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:13:19 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:13:19 LOG2 antvel: Parameters to Doppler: Topocentric 40399 2010 13 0.0 2010-Jan-13 07:13:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:13:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 07:13:19 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 07:13:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:13:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:13:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:13:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Jan-13 07:13:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:13:19 LOG5 begin_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2010-Jan-13 07:13:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:13:19 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.293525 2010.036415918828 18.999933 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555840 20.074833333333331 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 1 14.268657107777390 19.974081537764359 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 2 14.272656134068248 20.052144876292193 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 3 14.270547901890682 20.154086835548998 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 4 14.263802271668320 20.175051765058466 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 5 14.259756437066718 20.092555015376547 2010-Jan-13 07:13:19 LOG4 log_alfabeam: ALFABEAM 6 14.262497830047034 19.993716136025405 2010-Jan-13 07:13:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300122 2010-Jan-13 07:13:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:13:20 LOG5 begin_task: Level: (4) ID = <10516> Status = 0 0 0 0 ok 2010-Jan-13 07:13:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:13:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:13:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:13:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40401.00 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:13:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:13:31 LOG5 end_task: Level: (4) ID = <10516> Status = 0 0 0 0 ok 2010-Jan-13 07:13:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:13:31 LOG5 end_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2010-Jan-13 07:13:31 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Jan-13 07:13:31 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:13:31 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 07:13:31 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:13:31 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:13:31 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:13:31 LOG2 antvel: Parameters to Doppler: Topocentric 40411 2010 13 0.0 2010-Jan-13 07:13:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:13:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 07:13:31 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 07:13:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:13:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:13:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:13:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Jan-13 07:13:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:13:31 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2010-Jan-13 07:13:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:13:31 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.296867 2010.036416299085 18.999933 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555808 20.074833333333331 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 1 14.268853393573485 19.975033451860515 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 2 14.272698605554737 20.054629181679573 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 3 14.270390268892779 20.155707392164789 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 4 14.263607571601353 20.174043982462532 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 5 14.259724755258098 20.090019888836618 2010-Jan-13 07:13:31 LOG4 log_alfabeam: ALFABEAM 6 14.262656702069316 19.992273053981741 2010-Jan-13 07:13:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300123 2010-Jan-13 07:13:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:13:32 LOG5 begin_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2010-Jan-13 07:13:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:13:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:13:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:13:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40413.00 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:13:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:13:43 LOG5 end_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2010-Jan-13 07:13:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:13:43 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2010-Jan-13 07:13:43 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Jan-13 07:13:43 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:13:43 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 07:13:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:13:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:13:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:13:43 LOG2 antvel: Parameters to Doppler: Topocentric 40423 2010 13 0.0 2010-Jan-13 07:13:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:13:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 07:13:43 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 07:13:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:13:43 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:13:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:13:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Jan-13 07:13:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:13:43 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2010-Jan-13 07:13:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:13:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.300210 2010.036416679342 18.999933 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555615 20.074833333333334 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 1 14.269045849918941 19.976050789341333 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 2 14.272735899247499 20.057105741317908 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 3 14.270230990091250 20.157251009302453 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 4 14.263416901353102 20.172972712304073 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 5 14.259698322898904 20.087501222372264 2010-Jan-13 07:13:43 LOG4 log_alfabeam: ALFABEAM 6 14.262816519926368 19.990905826733972 2010-Jan-13 07:13:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300124 2010-Jan-13 07:13:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:13:44 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-Jan-13 07:13:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:13:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:13:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:13:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40425.00 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:13:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:13:55 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2010-Jan-13 07:13:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:13:55 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2010-Jan-13 07:13:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-13 07:13:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 07:13:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 07:13:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:13:55 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-Jan-13 07:13:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:13:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 07:13:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:13:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:13:55 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-Jan-13 07:13:55 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Jan-13 07:13:55 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:13:55 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 07:13:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:13:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:13:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:13:55 LOG2 antvel: Parameters to Doppler: Topocentric 40435 2010 13 0.0 2010-Jan-13 07:13:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:13:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 07:13:55 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 07:13:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:13:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:13:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:13:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Jan-13 07:13:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:13:55 LOG5 begin_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2010-Jan-13 07:13:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:13:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.303552 2010.036417059599 18.999933 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555668 20.074833333333331 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 1 14.269234035558554 19.977128473812673 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 2 14.272768064017228 20.059567589931483 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 3 14.270070586133031 20.158715487346509 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 4 14.263230686460023 20.171843242413775 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 5 14.259677033330838 20.085005908711043 2010-Jan-13 07:13:55 LOG4 log_alfabeam: ALFABEAM 6 14.262976783298399 19.989615789492586 2010-Jan-13 07:13:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300125 2010-Jan-13 07:13:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:13:56 LOG5 begin_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2010-Jan-13 07:13:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:13:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:13:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:13:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:13:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:13:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40437.00 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:13:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:14:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:14:07 LOG5 end_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2010-Jan-13 07:14:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:14:07 LOG5 end_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2010-Jan-13 07:14:07 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Jan-13 07:14:07 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:14:07 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 07:14:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:14:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:14:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:14:07 LOG2 antvel: Parameters to Doppler: Topocentric 40447 2010 13 0.0 2010-Jan-13 07:14:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:14:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 07:14:07 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 07:14:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:14:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:14:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:14:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Jan-13 07:14:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:14:07 LOG5 begin_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2010-Jan-13 07:14:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:14:07 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.306895 2010.0364174398562 18.999933 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555610 20.074833333333331 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 1 14.269417775594404 19.978262448647406 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 2 14.272795220858058 20.062010992819044 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 3 14.269909379481851 20.160100983940620 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 4 14.263049087371247 20.170659750371719 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 5 14.259660722984062 20.082537492416346 2010-Jan-13 07:14:07 LOG4 log_alfabeam: ALFABEAM 6 14.263137195390359 19.988402181899147 2010-Jan-13 07:14:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300126 2010-Jan-13 07:14:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:14:08 LOG5 begin_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2010-Jan-13 07:14:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:14:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:14:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:14:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40449.00 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:14:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:14:19 LOG5 end_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2010-Jan-13 07:14:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:14:19 LOG5 end_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2010-Jan-13 07:14:19 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Jan-13 07:14:19 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:14:19 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 07:14:19 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:14:19 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:14:19 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:14:19 LOG2 antvel: Parameters to Doppler: Topocentric 40459 2010 13 0.0 2010-Jan-13 07:14:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:14:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 07:14:19 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 07:14:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:14:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:14:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:14:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Jan-13 07:14:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:14:19 LOG5 begin_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2010-Jan-13 07:14:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:14:19 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.310237 2010.0364178201132 18.999933 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555590 20.074833333333324 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 1 14.269596712450914 19.979447170947580 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 2 14.272817482871062 20.064429603478093 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 3 14.269747873396204 20.161406485944529 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 4 14.262872444078161 20.169427932732646 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 5 14.259649226011691 20.080102099484623 2010-Jan-13 07:14:19 LOG4 log_alfabeam: ALFABEAM 6 14.263297283571079 19.987265266657587 2010-Jan-13 07:14:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300127 2010-Jan-13 07:14:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:14:20 LOG5 begin_task: Level: (4) ID = <10527> Status = 0 0 0 0 ok 2010-Jan-13 07:14:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:14:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:14:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:14:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40461.00 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:14:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:14:31 LOG5 end_task: Level: (4) ID = <10527> Status = 0 0 0 0 ok 2010-Jan-13 07:14:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:14:31 LOG5 end_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2010-Jan-13 07:14:31 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Jan-13 07:14:31 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:14:31 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 07:14:31 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:14:31 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:14:31 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:14:31 LOG2 antvel: Parameters to Doppler: Topocentric 40471 2010 13 0.0 2010-Jan-13 07:14:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:14:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 07:14:31 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 07:14:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:14:31 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:14:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:14:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Jan-13 07:14:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:14:31 LOG5 begin_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2010-Jan-13 07:14:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:14:31 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.313580 2010.0364182003702 18.999933 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555689 20.074833333333331 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 1 14.269770745503472 19.980678383976716 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 2 14.272835017258794 20.066820339055976 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 3 14.269586362799679 20.162633093449859 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 4 14.262700841864522 20.168152114348718 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 5 14.259642338663591 20.077702509474388 2010-Jan-13 07:14:31 LOG4 log_alfabeam: ALFABEAM 6 14.263456785913215 19.986203461307159 2010-Jan-13 07:14:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300128 2010-Jan-13 07:14:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:14:32 LOG5 begin_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2010-Jan-13 07:14:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:14:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:14:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:14:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40473.00 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:14:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:14:43 LOG5 end_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2010-Jan-13 07:14:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:14:43 LOG5 end_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2010-Jan-13 07:14:43 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Jan-13 07:14:43 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:14:43 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 07:14:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:14:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:14:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:14:43 LOG2 antvel: Parameters to Doppler: Topocentric 40483 2010 13 0.0 2010-Jan-13 07:14:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:14:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 07:14:43 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 07:14:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:14:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:14:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:14:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Jan-13 07:14:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:14:43 LOG5 begin_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2010-Jan-13 07:14:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:14:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.316922 2010.0364185806272 18.999933 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555608 20.074833333333324 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 1 14.269939602603445 19.981950350510868 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 2 14.272847988457508 20.069177623498287 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 3 14.269425316975928 20.163780856562795 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 4 14.262534534580446 20.166838128282567 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 5 14.259639850813011 20.075343961281739 2010-Jan-13 07:14:43 LOG4 log_alfabeam: ALFABEAM 6 14.263615271099530 19.985216102232538 2010-Jan-13 07:14:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300129 2010-Jan-13 07:14:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:14:44 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2010-Jan-13 07:14:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:14:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:14:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:14:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40485.00 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:48 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.79) to the zenith angle limit 1.06 degrees! 2010-Jan-13 07:14:48 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 519.3906 1.7879 RA/Dec = 14:15:59 +20:04:29 2010-Jan-13 07:14:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:14:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:14:55 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2010-Jan-13 07:14:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:14:55 LOG5 end_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2010-Jan-13 07:14:55 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Jan-13 07:14:55 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:14:55 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 07:14:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:14:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:14:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:14:55 LOG2 antvel: Parameters to Doppler: Topocentric 40495 2010 13 0.0 2010-Jan-13 07:14:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:14:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 07:14:55 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 07:14:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:14:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:14:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:14:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Jan-13 07:14:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:14:55 LOG5 begin_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2010-Jan-13 07:14:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:14:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.320265 2010.0364189608842 18.999933 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555530 20.074833333333331 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 1 14.270103255257368 19.983258850209307 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 2 14.272856596891785 20.071499120895570 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 3 14.269264990800547 20.164851669270259 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 4 14.262373535502205 20.165490212956350 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 5 14.259641532885825 20.073028406746282 2010-Jan-13 07:14:55 LOG4 log_alfabeam: ALFABEAM 6 14.263772521696636 19.984300946262149 2010-Jan-13 07:14:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300130 2010-Jan-13 07:14:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:14:56 LOG5 begin_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2010-Jan-13 07:14:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:14:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:14:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:14:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:14:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40497.00 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:15:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:15:07 LOG5 end_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2010-Jan-13 07:15:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:15:07 LOG5 end_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2010-Jan-13 07:15:07 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Jan-13 07:15:07 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:15:07 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 07:15:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:15:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:15:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:15:07 LOG2 antvel: Parameters to Doppler: Topocentric 40507 2010 13 0.0 2010-Jan-13 07:15:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:15:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 07:15:07 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 07:15:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:15:07 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:15:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:15:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Jan-13 07:15:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:15:07 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-Jan-13 07:15:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:15:07 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.323607 2010.0364193411415 18.999933 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555594 20.074833333333324 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 1 14.270261513003256 19.984598194320245 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 2 14.272861044212060 20.073780107760122 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 3 14.269105807571897 20.165846474383038 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 4 14.262218017093703 20.164114099555004 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 5 14.259647145732160 20.070760150551923 2010-Jan-13 07:15:07 LOG4 log_alfabeam: ALFABEAM 6 14.263928156686235 19.983456582577482 2010-Jan-13 07:15:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300131 2010-Jan-13 07:15:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:15:08 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-Jan-13 07:15:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:15:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:15:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:15:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40509.00 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:15:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:15:19 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2010-Jan-13 07:15:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:15:19 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2010-Jan-13 07:15:19 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Jan-13 07:15:19 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-13 07:15:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-13 07:15:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:15:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:15:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:15:19 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-Jan-13 07:15:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:15:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:15:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:15:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:15:19 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-Jan-13 07:15:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-13 07:15:19 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Jan-13 07:15:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:15:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 07:15:19 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:15:19 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:15:19 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:15:19 LOG2 antvel: Parameters to Doppler: Topocentric 40519 2010 13 0.0 2010-Jan-13 07:15:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:15:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 07:15:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 07:15:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:15:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:15:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:15:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Jan-13 07:15:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:15:19 LOG5 begin_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2010-Jan-13 07:15:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:15:19 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.326950 2010.0364197213985 18.999933 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555599 20.074833333333324 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 1 14.270414412868920 19.985964396626809 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 2 14.272861550825436 20.076019026221818 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 3 14.268947974197294 20.166767780491966 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 4 14.262067928064742 20.162713748691647 2010-Jan-13 07:15:19 LOG4 log_alfabeam: ALFABEAM 5 14.259656447732647 20.068540319052033 2010-Jan-13 07:15:20 LOG4 log_alfabeam: ALFABEAM 6 14.264082008303681 19.982680286508700 2010-Jan-13 07:15:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300132 2010-Jan-13 07:15:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:15:20 LOG5 begin_task: Level: (4) ID = <10538> Status = 0 0 0 0 ok 2010-Jan-13 07:15:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:15:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:15:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Jan-13 07:15:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40521.00 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:15:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:15:31 LOG5 end_task: Level: (4) ID = <10538> Status = 0 0 0 0 ok 2010-Jan-13 07:15:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:15:31 LOG5 end_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2010-Jan-13 07:15:31 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Jan-13 07:15:31 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:15:31 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 07:15:31 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:15:31 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:15:31 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:15:31 LOG2 antvel: Parameters to Doppler: Topocentric 40531 2010 13 0.0 2010-Jan-13 07:15:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:15:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 07:15:31 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 07:15:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:15:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:15:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:15:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Jan-13 07:15:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:15:31 LOG5 begin_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2010-Jan-13 07:15:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:15:31 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.330292 2010.0364201016555 18.999933 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555645 20.074833333333331 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 1 14.270561838229941 19.987352013985792 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 2 14.272858341748559 20.078212023579106 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 3 14.268791860781100 20.167617229670409 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 4 14.261923368138076 20.161294600032775 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 5 14.259669184874980 20.066372298792331 2010-Jan-13 07:15:31 LOG4 log_alfabeam: ALFABEAM 6 14.264233750273933 19.981970089701036 2010-Jan-13 07:15:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300133 2010-Jan-13 07:15:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:15:32 LOG5 begin_task: Level: (4) ID = <10540> Status = 0 0 0 0 ok 2010-Jan-13 07:15:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:15:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:15:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Jan-13 07:15:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40533.00 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:15:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:15:43 LOG5 end_task: Level: (4) ID = <10540> Status = 0 0 0 0 ok 2010-Jan-13 07:15:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:15:43 LOG5 end_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2010-Jan-13 07:15:43 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Jan-13 07:15:43 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:15:43 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 07:15:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:15:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:15:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:15:43 LOG2 antvel: Parameters to Doppler: Topocentric 40543 2010 13 0.0 2010-Jan-13 07:15:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:15:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 07:15:43 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 07:15:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:15:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:15:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:15:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Jan-13 07:15:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:15:43 LOG5 begin_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2010-Jan-13 07:15:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:15:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.333635 2010.0364204819125 18.999933 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555594 20.074833333333324 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 1 14.270703882030404 19.988757442570403 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 2 14.272851645145462 20.080358296445890 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 3 14.268637622784196 20.168397757612762 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 4 14.261784231661533 20.159860196590504 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 5 14.259685115549281 20.064256444745624 2010-Jan-13 07:15:43 LOG4 log_alfabeam: ALFABEAM 6 14.264383265632597 19.981322963226546 2010-Jan-13 07:15:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300134 2010-Jan-13 07:15:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:15:44 LOG5 begin_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2010-Jan-13 07:15:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:15:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:15:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Jan-13 07:15:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40545.00 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:15:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:15:55 LOG5 end_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2010-Jan-13 07:15:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:15:55 LOG5 end_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2010-Jan-13 07:15:55 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Jan-13 07:15:55 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:15:55 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 07:15:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:15:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:15:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:15:55 LOG2 antvel: Parameters to Doppler: Topocentric 40555 2010 13 0.0 2010-Jan-13 07:15:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:15:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 07:15:55 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 07:15:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:15:55 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:15:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:15:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Jan-13 07:15:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:15:55 LOG5 begin_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2010-Jan-13 07:15:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:15:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.336977 2010.0364208621695 18.999933 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555594 20.074833333333324 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 1 14.270840491069290 19.990175629105355 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 2 14.272841696955130 20.082454829036035 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 3 14.268485574324320 20.169111510845180 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 4 14.261650556581126 20.158415551378859 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 5 14.259703982974358 20.062195289513195 2010-Jan-13 07:15:55 LOG4 log_alfabeam: ALFABEAM 6 14.264530283356542 19.980736563077532 2010-Jan-13 07:15:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300135 2010-Jan-13 07:15:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:15:56 LOG5 begin_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2010-Jan-13 07:15:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:15:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:15:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:15:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Jan-13 07:15:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40557.00 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:15:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:16:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:16:07 LOG5 end_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2010-Jan-13 07:16:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:16:07 LOG5 end_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2010-Jan-13 07:16:07 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Jan-13 07:16:07 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:16:07 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 07:16:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:16:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:16:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:16:07 LOG2 antvel: Parameters to Doppler: Topocentric 40567 2010 13 0.0 2010-Jan-13 07:16:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:16:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 07:16:07 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 07:16:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:16:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:16:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Jan-13 07:16:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:16:07 LOG5 begin_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2010-Jan-13 07:16:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:16:07 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.340319 2010.0364212424267 18.999933 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555562 20.074833333333345 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 1 14.270971764588850 19.991603020520959 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 2 14.272828727044974 20.084500903231511 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 3 14.268335864171508 20.169761489400976 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 4 14.261522231976715 20.156964137524053 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 5 14.259725548380581 20.060189098688831 2010-Jan-13 07:16:07 LOG4 log_alfabeam: ALFABEAM 6 14.264674692342545 19.980207866421878 2010-Jan-13 07:16:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300136 2010-Jan-13 07:16:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:16:08 LOG5 begin_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2010-Jan-13 07:16:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:16:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:16:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Jan-13 07:16:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40569.00 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:16:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:16:19 LOG5 end_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2010-Jan-13 07:16:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:16:19 LOG5 end_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2010-Jan-13 07:16:19 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Jan-13 07:16:19 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:16:19 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 07:16:19 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:16:19 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:16:19 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:16:19 LOG2 antvel: Parameters to Doppler: Topocentric 40579 2010 13 0.0 2010-Jan-13 07:16:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:16:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 07:16:19 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 07:16:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:16:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:16:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:16:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Jan-13 07:16:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:16:19 LOG5 begin_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2010-Jan-13 07:16:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:16:19 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.343662 2010.0364216226837 18.999933 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555554 20.074833333333331 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 1 14.271097816733949 19.993036329646699 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 2 14.272812958992981 20.086496082554842 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 3 14.268188618005460 20.170350720000375 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 4 14.261399133058317 20.155509154138748 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 5 14.259749582254312 20.058237870693226 2010-Jan-13 07:16:19 LOG4 log_alfabeam: ALFABEAM 6 14.264816402693464 19.979733865431498 2010-Jan-13 07:16:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300137 2010-Jan-13 07:16:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:16:20 LOG5 begin_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2010-Jan-13 07:16:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:16:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:16:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Jan-13 07:16:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40581.00 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:16:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:16:31 LOG5 end_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2010-Jan-13 07:16:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:16:31 LOG5 end_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2010-Jan-13 07:16:31 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Jan-13 07:16:31 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:16:31 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 07:16:31 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:16:31 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:16:31 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:16:31 LOG2 antvel: Parameters to Doppler: Topocentric 40591 2010 13 0.0 2010-Jan-13 07:16:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:16:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 07:16:31 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 07:16:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:16:31 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:16:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:16:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Jan-13 07:16:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:16:31 LOG5 begin_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2010-Jan-13 07:16:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:16:31 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.347004 2010.0364220029408 18.999933 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555567 20.074833333333331 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 1 14.271218667765533 19.994471245490438 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 2 14.272794626449672 20.088438465181877 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 3 14.268044068407029 20.170881776043160 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 4 14.261281227301472 20.154054834399176 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 5 14.259775840714434 20.056343042467059 2010-Jan-13 07:16:31 LOG4 log_alfabeam: ALFABEAM 6 14.264955220799752 19.979311946739365 2010-Jan-13 07:16:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300138 2010-Jan-13 07:16:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:16:32 LOG5 begin_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2010-Jan-13 07:16:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:16:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:16:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Jan-13 07:16:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40593.00 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:16:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:16:43 LOG5 end_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2010-Jan-13 07:16:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:16:43 LOG5 end_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2010-Jan-13 07:16:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-13 07:16:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-13 07:16:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-13 07:16:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:16:43 LOG5 begin_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2010-Jan-13 07:16:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:16:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-13 07:16:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:16:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:16:43 LOG5 end_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2010-Jan-13 07:16:43 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Jan-13 07:16:43 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:16:43 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Jan-13 07:16:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:16:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:16:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:16:43 LOG2 antvel: Parameters to Doppler: Topocentric 40603 2010 13 0.0 2010-Jan-13 07:16:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:16:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Jan-13 07:16:43 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Jan-13 07:16:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:16:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:16:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:16:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Jan-13 07:16:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:16:43 LOG5 begin_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2010-Jan-13 07:16:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:16:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.350347 2010.0364223831978 18.999933 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555602 20.074833333333324 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 1 14.271334501418648 19.995905440012713 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 2 14.272773936654893 20.090328797033944 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 3 14.267902249738004 20.171357934997186 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 4 14.261168323267899 20.152603397104844 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 5 14.259804118760071 20.054503474508081 2010-Jan-13 07:16:43 LOG4 log_alfabeam: ALFABEAM 6 14.265091142528744 19.978938965500173 2010-Jan-13 07:16:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300139 2010-Jan-13 07:16:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:16:44 LOG5 begin_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2010-Jan-13 07:16:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:16:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Jan-13 07:16:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Jan-13 07:16:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40605.00 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:16:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:16:55 LOG5 end_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2010-Jan-13 07:16:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:16:55 LOG5 end_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2010-Jan-13 07:16:55 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Jan-13 07:16:55 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:16:55 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Jan-13 07:16:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:16:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:16:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:16:55 LOG2 antvel: Parameters to Doppler: Topocentric 40615 2010 13 0.0 2010-Jan-13 07:16:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:16:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Jan-13 07:16:55 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Jan-13 07:16:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:16:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:16:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:16:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Jan-13 07:16:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:16:55 LOG5 begin_task: Level: (3) ID = <10554> Status = 0 0 0 0 ok 2010-Jan-13 07:16:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:16:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.353689 2010.0364227634548 18.999933 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555592 20.074833333333345 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 1 14.271445372851469 19.997335137676473 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 2 14.272751112737327 20.092165796289457 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 3 14.267763345380990 20.171781873524210 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 4 14.261060355601414 20.151158525585608 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 5 14.259834188702724 20.052720015795209 2010-Jan-13 07:16:55 LOG4 log_alfabeam: ALFABEAM 6 14.265224019523684 19.978612283690744 2010-Jan-13 07:16:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300140 2010-Jan-13 07:16:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:16:56 LOG5 begin_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2010-Jan-13 07:16:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:16:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Jan-13 07:16:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:16:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:16:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Jan-13 07:16:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40617.00 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:17:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:17:07 LOG5 end_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2010-Jan-13 07:17:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:17:07 LOG5 end_task: Level: (3) ID = <10554> Status = 0 0 0 0 ok 2010-Jan-13 07:17:07 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Jan-13 07:17:07 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:17:07 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Jan-13 07:17:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:17:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:17:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:17:07 LOG2 antvel: Parameters to Doppler: Topocentric 40627 2010 13 0.0 2010-Jan-13 07:17:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:17:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Jan-13 07:17:07 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Jan-13 07:17:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:17:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:17:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:17:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Jan-13 07:17:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:17:07 LOG5 begin_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2010-Jan-13 07:17:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:17:07 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.357032 2010.036423143712 18.999933 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555562 20.074833333333331 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 1 14.271551483577527 19.998758539862163 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 2 14.272726343482484 20.093950650298741 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 3 14.267627350004725 20.172156785400954 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 4 14.260957117064441 20.149721903568672 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 5 14.259865868261288 20.050991129786997 2010-Jan-13 07:17:07 LOG4 log_alfabeam: ALFABEAM 6 14.265353882789528 19.978328894208406 2010-Jan-13 07:17:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300141 2010-Jan-13 07:17:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:17:08 LOG5 begin_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2010-Jan-13 07:17:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:17:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Jan-13 07:17:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Jan-13 07:17:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40629.00 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:17:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:17:19 LOG5 end_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2010-Jan-13 07:17:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:17:19 LOG5 end_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2010-Jan-13 07:17:19 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Jan-13 07:17:19 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:17:19 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Jan-13 07:17:19 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:17:19 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:17:19 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:17:19 LOG2 antvel: Parameters to Doppler: Topocentric 40639 2010 13 0.0 2010-Jan-13 07:17:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:17:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Jan-13 07:17:19 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Jan-13 07:17:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:17:19 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:17:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:17:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Jan-13 07:17:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:17:19 LOG5 begin_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2010-Jan-13 07:17:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:17:19 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.360374 2010.036423523969 18.999933 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555574 20.074833333333324 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 1 14.271652913625061 20.000172399593524 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 2 14.272699836915690 20.095682591958361 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 3 14.267494403542301 20.172485340652731 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 4 14.260858519395688 20.148296678422312 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 5 14.259898949341945 20.049317191790248 2010-Jan-13 07:17:19 LOG4 log_alfabeam: ALFABEAM 6 14.265480623067988 19.978086223998339 2010-Jan-13 07:17:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300142 2010-Jan-13 07:17:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:17:20 LOG5 begin_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2010-Jan-13 07:17:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:17:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Jan-13 07:17:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Jan-13 07:17:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40641.00 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:17:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:17:31 LOG5 end_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2010-Jan-13 07:17:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:17:31 LOG5 end_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2010-Jan-13 07:17:31 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Jan-13 07:17:31 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:17:31 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Jan-13 07:17:31 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:17:31 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:17:31 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:17:31 LOG2 antvel: Parameters to Doppler: Topocentric 40651 2010 13 0.0 2010-Jan-13 07:17:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:17:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Jan-13 07:17:31 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Jan-13 07:17:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:17:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:17:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:17:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Jan-13 07:17:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:17:31 LOG5 begin_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2010-Jan-13 07:17:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:17:31 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.363717 2010.036423904226 18.999933 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555590 20.074833333333331 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 1 14.271749873613370 20.001575415470850 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 2 14.272671760748574 20.097363146053478 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 3 14.267364467441947 20.172770568376578 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 4 14.260764348047315 20.146884036744037 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 5 14.259933273858444 20.047696376880353 2010-Jan-13 07:17:31 LOG4 log_alfabeam: ALFABEAM 6 14.265604299954447 19.977881466042572 2010-Jan-13 07:17:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300143 2010-Jan-13 07:17:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:17:32 LOG5 begin_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2010-Jan-13 07:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:17:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Jan-13 07:17:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Jan-13 07:17:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40653.00 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:17:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:17:43 LOG5 end_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2010-Jan-13 07:17:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:17:43 LOG5 end_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2010-Jan-13 07:17:43 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Jan-13 07:17:43 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:17:43 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Jan-13 07:17:43 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:17:43 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:17:43 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:17:43 LOG2 antvel: Parameters to Doppler: Topocentric 40663 2010 13 0.0 2010-Jan-13 07:17:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:17:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Jan-13 07:17:43 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Jan-13 07:17:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:17:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:17:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:17:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Jan-13 07:17:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:17:43 LOG5 begin_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2010-Jan-13 07:17:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:17:43 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.367059 2010.036424284483 18.999933 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555579 20.074833333333338 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 1 14.271842459893904 20.002964839334037 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 2 14.272642305220616 20.098991958490785 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 3 14.267237644467103 20.173015051221785 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 4 14.260674500215929 20.145486625176353 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 5 14.259968654885611 20.046128692645194 2010-Jan-13 07:17:43 LOG4 log_alfabeam: ALFABEAM 6 14.265724836957753 19.977712175005525 2010-Jan-13 07:17:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300144 2010-Jan-13 07:17:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:17:44 LOG5 begin_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2010-Jan-13 07:17:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:17:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Jan-13 07:17:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Jan-13 07:17:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40665.00 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:17:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:17:55 LOG5 end_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2010-Jan-13 07:17:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:17:55 LOG5 end_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2010-Jan-13 07:17:55 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Jan-13 07:17:55 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:17:55 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Jan-13 07:17:55 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:17:55 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03642 J 2010-Jan-13 07:17:55 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:17:55 LOG2 antvel: Parameters to Doppler: Topocentric 40675 2010 13 0.0 2010-Jan-13 07:17:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:17:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Jan-13 07:17:55 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Jan-13 07:17:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:17:55 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:17:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Jan-13 07:17:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-13 07:17:55 LOG5 begin_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2010-Jan-13 07:17:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:17:55 LOG5 log_alfabeam: Parameters: 14.266305555555558 20.074833333333331 14.370402 2010.0364246647403 18.999933 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 0 14.266305555555579 20.074833333333324 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 1 14.271930885148775 20.004339818839988 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 2 14.272611615971609 20.100570796018626 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 3 14.267113869372126 20.173221599766446 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 4 14.260588760850700 20.144105185589918 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 5 14.260004958509450 20.044612121949058 2010-Jan-13 07:17:55 LOG4 log_alfabeam: ALFABEAM 6 14.265842315941327 19.977575782025301 2010-Jan-13 07:17:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 1300145 2010-Jan-13 07:17:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-13 07:17:56 LOG5 begin_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2010-Jan-13 07:17:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-13 07:17:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Jan-13 07:17:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:17:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Jan-13 07:17:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 40677.00 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 977.500000 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1177.500000 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1377.500000 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2022.500000 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1822.994547 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2133.971316 MHz 2010-Jan-13 07:18:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-13 07:18:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-13 07:18:07 LOG5 end_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-13 07:18:07 LOG5 end_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 INFO2 smartfreq: Switching off CAL 2010-Jan-13 07:18:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-13 07:18:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-13 07:18:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-13 07:18:07 LOG5 begin_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-13 07:18:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-13 07:18:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-13 07:18:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-13 07:18:07 LOG5 end_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-13 07:18:07 LOG5 antvel: Calling 'antvel 141558.700000 200429.400000 J Topocentric 0' 2010-Jan-13 07:18:07 LOG2 antvel: Precessing RA = 14:15:58.7 Dec = +20:04:29.4 Epoch = 2010.03643 J 2010-Jan-13 07:18:07 LOG2 antvel: Computed apparent RA = 14:16:27.5 Dec = +20:01:25.5 2010-Jan-13 07:18:07 LOG2 antvel: Parameters to Doppler: Topocentric 40687 2010 13 0.0 2010-Jan-13 07:18:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-13 07:18:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Jan-13 07:18:07 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Jan-13 07:18:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-13 07:18:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-13 07:18:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 07:18:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:18:07 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-13 07:18:07 LOG5 finish_task: Level: (2) ID = <10497> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Jan-13 07:18:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:18:07 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Jan-13 07:18:07 LOG5 end_task: Level: (2) ID = <10497> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 NOTE run_command_file: DONE with command file processing 2010-Jan-13 07:18:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-13 07:18:07 STOP finish_task: Finishing task 'running command file 'command_galfacurpos10.cmd'' 2010-Jan-13 07:18:07 LOG5 finish_task: Level: (1) ID = <10481> Status = 0 0 0 0 ok 2010-Jan-13 07:18:07 DONE finish_task: DONE finished running: command file 'command_galfacurpos10.cmd' 2010-Jan-13 07:18:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-13 07:18:08 END end_task: Finishing task 'running command file 'command_galfacurpos10.cmd'' with status 'OK' 2010-Jan-13 07:18:08 LOG5 end_task: Level: (1) ID = <10481> Status = 0 0 0 0 ok 2010-Jan-13 07:18:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Jan-13 07:18:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-13 07:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:18:23 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Jan-13 07:18:23 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Jan-13 07:18:23 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2010-Jan-13 07:18:23 LOG3 vw_send: To DATATAKING: mvdata a2010 2010-Jan-13 07:18:23 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Jan-13 07:18:23 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Jan-13 07:18:23 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Jan-13 07:18:23 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Jan-13 07:18:23 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2010-Jan-13 07:18:23 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Jan-13 07:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-13 07:18:25 LOG3 exec_msg: Closing socket