2009-Jan-14 18:04:34 BEGIN executive: CIMA executive starting ... 2009-Jan-14 18:04:34 NOTE executive: STARTING NEW CIMA SESSION 2009-Jan-14 18:04:34 INFO1 executive: Using CIMA version 3.1.02 'smart' from 2008-12-29 17:19 2009-Jan-14 18:04:34 INFO4 executive: This is an ON-LINE session 2009-Jan-14 18:04:34 INFO4 executive: This is a LOCAL session 2009-Jan-14 18:04:35 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jan-14 18:04:35 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2009-Jan-14 18:04:35 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090114' 2009-Jan-14 18:04:35 LOG2 log_preferences: Currently applied preferences: 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(datawindow) = open 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(logcolours) = full 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(displayformat) = long 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(logformat) = new 2009-Jan-14 18:04:35 LOG2 log_preferences: prefs(fontsize) = 3 2009-Jan-14 18:04:35 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-14 18:04:35 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-14 18:04:35 ALERT executive: CIMA executive ready 2009-Jan-14 18:04:36 NOTE frontend: CIMA frontend ready 2009-Jan-14 18:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:04:38 LOG4 got_cormsg: From DATATAKING: setup 2009-Jan-14 18:04:42 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jan-14 18:04:42 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Jan-14 18:04:42 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Jan-14 18:04:42 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-14 18:04:42 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-14 18:04:42 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-14 18:04:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-14 18:04:42 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-14 18:04:42 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-14 18:04:42 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-14 18:04:42 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-14 18:04:42 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-14 18:04:42 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Jan-14 18:04:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:04:42 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-14 18:04:42 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Jan-14 18:04:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jan-14 18:04:44 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jan-14 18:04:44 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jan-14 18:04:47 LOG4 got_cormsg: From DATATAKING: timeout : prgMgr@dap1 2009-Jan-14 18:04:50 LOG4 got_cormsg: From DATATAKING: timeout : prgMgr@dap2 2009-Jan-14 18:04:53 LOG4 got_cormsg: From DATATAKING: timeout : prgMgr@dap1 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-14 18:04:54 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-14 18:04:56 LOG4 got_cormsg: From DATATAKING: timeout : prgMgr@dap2 2009-Jan-14 18:04:57 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jan-14 18:04:57 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jan-14 18:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:05:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-14 18:05:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-14 18:05:54 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-14 18:05:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-14 18:05:54 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-14 18:05:54 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-14 18:05:54 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-14 18:05:54 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-14 18:05:54 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-14 18:05:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-14 18:05:57 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-14 18:05:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-14 18:05:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-14 18:05:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-14 18:06:30 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-14 18:06:30 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 014100.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-14 18:06:30 LOG1 track_new_source: Calling 'track_new_source drift41p2 014100.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-14 18:06:30 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-14 18:06:30 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2009-Jan-14 18:06:30 LOG3 track_source: Calling 'track_source drift41p2 014100.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-14 18:06:30 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:06:30 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2009-Jan-14 18:06:30 INFO1 track_source: Starting to track drift41p2 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: set ra 014100.0 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: set dec +095118 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: pnt tr 014100.0 +095118 -CJ 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:06:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:06:30 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:06:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:06:30 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-14 18:06:30 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-14 18:06:30 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-14 18:06:30 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:06:30 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-14 18:06:30 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:06:30 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-14 18:06:30 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-14 18:06:30 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 DONE finish_task: DONE finished selecting: new source 2009-Jan-14 18:06:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:06:30 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-14 18:06:30 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: set ra 014100.0 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: set dec +095118 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% 014100.0 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% +095118 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr 014100.0 +095118 -CJ 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:30 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-14 18:08:30 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-14 18:08:30 LOG1 track_new_source: Calling 'track_new_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-14 18:08:30 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-14 18:08:30 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-14 18:08:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2009-Jan-14 18:08:30 LOG3 track_source: Calling 'track_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-14 18:08:30 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:08:30 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-14 18:08:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2009-Jan-14 18:08:30 INFO1 track_source: Starting to track drift41p2 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: set ra 012700.0 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: set dec +095118 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: pnt tr 012700.0 +095118 -CJ 2009-Jan-14 18:08:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:08:31 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:08:31 LOG5 finish_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:08:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:08:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:08:31 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-14 18:08:31 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-14 18:08:31 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-14 18:08:31 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:08:31 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-14 18:08:31 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-14 18:08:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:08:31 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-14 18:08:31 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-14 18:08:31 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 DONE finish_task: DONE finished selecting: new source 2009-Jan-14 18:08:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:08:31 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-14 18:08:31 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: set ra 012700.0 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: set dec +095118 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% 012700.0 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% +095118 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr 012700.0 +095118 -CJ 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:33 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-14 18:08:33 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-14 18:08:33 LOG1 track_new_source: Calling 'track_new_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-14 18:08:33 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-14 18:08:33 LOG5 begin_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2009-Jan-14 18:08:33 LOG3 track_source: Calling 'track_source drift41p2 012700.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-14 18:08:33 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:08:33 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2009-Jan-14 18:08:33 INFO1 track_source: Starting to track drift41p2 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: set ra 012700.0 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: set dec +095118 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: pnt tr 012700.0 +095118 -CJ 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:08:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:08:33 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:08:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:08:33 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-14 18:08:33 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-14 18:08:33 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-14 18:08:33 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:08:33 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-14 18:08:33 LOG5 finish_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:08:33 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-14 18:08:33 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-14 18:08:33 LOG5 finish_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 DONE finish_task: DONE finished selecting: new source 2009-Jan-14 18:08:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:08:33 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-14 18:08:33 LOG5 end_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: set ra 012700.0 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: set dec +095118 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% 012700.0 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% +095118 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: pnt tr 012700.0 +095118 -CJ 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:09:38 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Jan-14 18:09:57 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Jan-14 18:09:57 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Jan-14 18:09:57 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Jan-14 18:09:57 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-14 18:09:57 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-14 18:09:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Jan-14 18:09:57 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Jan-14 18:09:57 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Jan-14 18:09:57 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jan-14 18:09:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-14 18:09:57 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jan-14 18:09:57 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Jan-14 18:09:57 LOG2 CIMA-antvel: Precessing RA = 01:27:00.0 Dec = +09:51:18.0 Epoch = 2009.04040 J 2009-Jan-14 18:09:57 LOG2 CIMA-antvel: Computed apparent RA = 01:27:29.4 Dec = +09:54:13.6 2009-Jan-14 18:09:57 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 79797 2009 14 0.0 2009-Jan-14 18:09:57 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-14 18:09:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-14 18:09:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-14 18:09:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-14 18:09:59 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-14 18:09:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-14 18:09:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-14 18:09:59 INFO1 config_iflo: Selecting receiver ALFA 2009-Jan-14 18:09:59 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jan-14 18:09:59 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jan-14 18:09:59 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-14 18:09:59 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-14 18:09:59 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-14 18:09:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-14 18:09:59 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-14 18:10:00 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-14 18:10:00 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-14 18:10:00 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jan-14 18:10:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:10:00 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-14 18:10:00 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jan-14 18:10:00 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jan-14 18:10:00 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jan-14 18:10:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jan-14 18:10:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:10:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:10:00 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:10:00 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:10:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:10:00 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:10:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jan-14 18:10:00 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-14 18:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jan-14 18:10:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-14 18:10:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:10:00 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-14 18:10:00 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jan-14 18:10:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:10:16 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-14 18:10:16 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-14 18:10:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-14 18:10:16 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-14 18:10:16 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-14 18:10:16 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-14 18:10:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:10:17 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-14 18:10:17 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-14 18:10:17 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-14 18:10:17 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-14 18:10:17 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-14 18:10:17 START begin_task: Starting task 'selecting calibration port' 2009-Jan-14 18:10:17 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-14 18:10:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-14 18:10:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:10:17 START begin_task: Starting task 'waiting on calport' 2009-Jan-14 18:10:17 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:10:17 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-14 18:10:17 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-14 18:10:17 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-14 18:10:17 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:10:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:10:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:10:17 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:10:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:10:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:10:17 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-14 18:10:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-14 18:10:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:10:17 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:10:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:10:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:10:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:10:17 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-14 18:10:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:10:18 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-14 18:10:18 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:10:18 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-14 18:10:18 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Jan-14 18:10:18 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Jan-14 18:10:18 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Jan-14 18:10:18 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Jan-14 18:10:18 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jan-14 18:10:18 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jan-14 18:10:18 LOG3 track_source: Calling 'track_source galfasrc 012100.0 +095118 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-14 18:10:18 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:10:18 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jan-14 18:10:18 INFO1 track_source: Starting to track galfasrc 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: set ra 012100.0 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: set dec +095118 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: pnt tr 012100.0 +095118 -CJ 2009-Jan-14 18:10:18 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:10:18 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:10:18 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:10:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:10:18 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jan-14 18:10:18 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:10:18 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jan-14 18:10:18 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Jan-14 18:10:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jan-14 18:10:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:10:18 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-14 18:10:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-14 18:10:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-14 18:10:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-14 18:10:19 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-14 18:10:19 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-14 18:10:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:10:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20090114.a2010.0000.fits 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-14 18:10:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-14 18:10:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-14 18:10:19 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090114.a2010.0000.fits} 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: set ra 012100.0 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: set dec +095118 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: vw% 012100.0 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: vw% +095118 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: pnt tr 012100.0 +095118 -CJ 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-14 18:10:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:10:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:10:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-14 18:10:37 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-14 18:10:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-14 18:10:37 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-14 18:10:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-14 18:10:37 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:10:37 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-14 18:10:37 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-14 18:10:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:10:37 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-14 18:10:37 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-14 18:10:37 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Jan-14 18:10:37 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jan-14 18:10:37 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-14 18:10:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-14 18:10:37 LOG3 waittrk: Start waittrk 5 2009-Jan-14 18:10:37 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-14 18:10:37 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-14 18:10:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-14 18:10:42 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-14 18:10:42 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-14 18:10:42 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-14 18:11:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-14 18:11:00 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-14 18:11:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-14 18:11:00 INFO2 waittrk: Now tracking galfasrc 2009-Jan-14 18:11:00 LOG4 waittrk: Current telescope position: Az = 360.50 ZA = 8.41 2009-Jan-14 18:11:00 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-14 18:11:00 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-14 18:11:00 DONE finish_task: DONE finished waiting: telescope on source 2009-Jan-14 18:11:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:11:00 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-14 18:11:00 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-14 18:11:00 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-14 18:11:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jan-14 18:11:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-14 18:11:01 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-14 18:11:01 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jan-14 18:11:01 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jan-14 18:11:01 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jan-14 18:11:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jan-14 18:11:01 START begin_task: Starting task 'selecting calibration type' 2009-Jan-14 18:11:01 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-14 18:11:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-14 18:11:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:11:01 START begin_task: Starting task 'waiting on setcal' 2009-Jan-14 18:11:01 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-14 18:11:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:11:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:01 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:11:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-14 18:11:01 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-14 18:11:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:11:01 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-14 18:11:01 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:11:01 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:01 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:11:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:11:01 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-14 18:11:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:11:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-14 18:11:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:11:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:11:01 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:11:01 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:11:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:11:02 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:11:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:11:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-14 18:11:02 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:11:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:11:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:11:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:11:02 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090114.a2010.0000.fits' is empty! 2009-Jan-14 18:11:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jan-14 18:11:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-14 18:11:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-14 18:11:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:11:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:11:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:11:02 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:11:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:11:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:11:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:11:02 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-14 18:11:02 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:11:02 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-14 18:11:02 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-14 18:11:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-14 18:11:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-14 18:11:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:11:02 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-14 18:11:02 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-14 18:11:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-14 18:11:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:11:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:11:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-14 18:11:05 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-14 18:11:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-14 18:11:05 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:11:05 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-14 18:11:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-14 18:11:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:11:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:11:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:11:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:11:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-14 18:11:05 LOG5 begin_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-14 18:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-14 18:11:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2009-Jan-14 18:11:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-14 18:11:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-14 18:11:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2009-Jan-14 18:11:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-14 18:11:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-14 18:11:06 LOG5 end_task: Level: (5) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.098 1.014 ALFA beam 1: 0.963 1.012 2009-Jan-14 18:11:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 0.901 ALFA beam 3: 0.987 1.003 2009-Jan-14 18:11:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.001 1.026 ALFA beam 5: 0.963 0.925 2009-Jan-14 18:11:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.079 0.097 ALFA beam 7: 0.967 0.106 2009-Jan-14 18:11:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:11:06 LOG5 finish_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-14 18:11:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:11:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:11:06 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-14 18:11:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:11:06 LOG5 finish_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-14 18:11:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:11:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:11:06 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-14 18:11:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:11:06 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-14 18:11:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:11:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04040 J 2009-Jan-14 18:11:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:11:06 LOG2 antvel: Parameters to Doppler: Topocentric 79865 2009 14 0.0 2009-Jan-14 18:11:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:11:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-14 18:11:06 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-14 18:11:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:11:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:11:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:11:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-14 18:11:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:11:06 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-14 18:11:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:11:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.368012 2009.0404043716887 18.999933 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000225 9.855000000000004 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 1 1.348952825449430 9.959999244498817 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 2 1.344215955823141 9.891589409425873 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 3 1.345216533630551 9.786467698088734 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 4 1.351075560692148 9.750028548266130 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 5 1.355831459223028 9.819253552698365 2009-Jan-14 18:11:06 LOG4 log_alfabeam: ALFABEAM 6 1.354709363678904 9.924095182965031 2009-Jan-14 18:11:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400001 2009-Jan-14 18:11:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:11:07 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-14 18:11:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:11:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:11:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:11:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79868.00 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:11:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Jan-14 18:11:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.014 0.963 1.012 2009-Jan-14 18:11:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.901 0.987 1.003 2009-Jan-14 18:11:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 1.026 0.963 0.925 2009-Jan-14 18:11:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.097 0.967 0.106 2009-Jan-14 18:11:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.132 (still bad) 2009-Jan-14 18:11:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Jan-14 18:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Jan-14 18:11:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.138 (still bad) 2009-Jan-14 18:11:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:11:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:11:18 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-14 18:11:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:11:18 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-14 18:11:18 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-14 18:11:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:11:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-14 18:11:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:11:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04040 J 2009-Jan-14 18:11:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:11:18 LOG2 antvel: Parameters to Doppler: Topocentric 79878 2009 14 0.0 2009-Jan-14 18:11:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:11:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-14 18:11:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-14 18:11:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:11:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-14 18:11:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:11:18 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-14 18:11:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:11:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.371633 2009.0404047836337 18.999933 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000152 9.854999999999997 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 1 1.348996332445949 9.960091975933588 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 2 1.344231208081902 9.892111739729106 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 3 1.345188254609681 9.786901527543780 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 4 1.351032088319750 9.749933244672354 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 5 1.355816542883521 9.818726807806257 2009-Jan-14 18:11:18 LOG4 log_alfabeam: ALFABEAM 6 1.354737892547016 9.923667968559924 2009-Jan-14 18:11:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400002 2009-Jan-14 18:11:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:11:19 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-14 18:11:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:11:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:11:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Jan-14 18:11:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:11:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79880.00 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Jan-14 18:11:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Jan-14 18:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Jan-14 18:11:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Jan-14 18:11:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:11:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Jan-14 18:11:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:11:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:11:30 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-14 18:11:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:11:30 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-14 18:11:30 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-14 18:11:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:11:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-14 18:11:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:11:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:11:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:11:30 LOG2 antvel: Parameters to Doppler: Topocentric 79890 2009 14 0.0 2009-Jan-14 18:11:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:11:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-14 18:11:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-14 18:11:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:11:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:11:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:11:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-14 18:11:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:11:30 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-14 18:11:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:11:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.374975 2009.0404051638909 18.999933 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000118 9.855000000000004 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 1 1.349036508664325 9.960174046314691 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 2 1.344245471912269 9.892592440629153 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 3 1.345162322917986 9.787304066913107 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 4 1.350991942153195 9.749848797737863 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 5 1.355802585742004 9.818241977394740 2009-Jan-14 18:11:30 LOG4 log_alfabeam: ALFABEAM 6 1.354764059605376 9.923271491290997 2009-Jan-14 18:11:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400003 2009-Jan-14 18:11:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:11:31 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-14 18:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:11:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:11:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:11:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79892.00 2009-Jan-14 18:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:11:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Jan-14 18:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Jan-14 18:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Jan-14 18:11:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Jan-14 18:11:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Jan-14 18:11:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:11:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:11:42 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-14 18:11:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:11:42 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-14 18:11:42 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-14 18:11:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:11:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-14 18:11:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:11:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:11:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:11:42 LOG2 antvel: Parameters to Doppler: Topocentric 79902 2009 14 0.0 2009-Jan-14 18:11:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:11:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-14 18:11:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-14 18:11:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:11:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:11:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:11:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-14 18:11:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:11:42 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-14 18:11:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:11:42 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.378318 2009.0404055441479 18.999933 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000078 9.855000000000008 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 1 1.349076713400069 9.960252759531786 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 2 1.344259917736056 9.893071909144100 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 3 1.345136547682988 9.787708735490188 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 4 1.350951765645203 9.749767705267672 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 5 1.355788443423674 9.817758326142172 2009-Jan-14 18:11:42 LOG4 log_alfabeam: ALFABEAM 6 1.354790074805966 9.922872843881233 2009-Jan-14 18:11:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400004 2009-Jan-14 18:11:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:11:43 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-14 18:11:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:11:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:11:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:11:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:11:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79904.00 2009-Jan-14 18:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Jan-14 18:11:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Jan-14 18:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.109 (still bad) 2009-Jan-14 18:11:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Jan-14 18:11:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Jan-14 18:11:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:11:54 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-14 18:11:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:11:54 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-14 18:11:54 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-14 18:11:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:11:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-14 18:11:54 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:11:54 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:11:54 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:11:54 LOG2 antvel: Parameters to Doppler: Topocentric 79914 2009 14 0.0 2009-Jan-14 18:11:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:11:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-14 18:11:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-14 18:11:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:11:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:11:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:11:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-14 18:11:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:11:54 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-14 18:11:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:11:54 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.381660 2009.0404059244049 18.999933 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000053 9.855000000000000 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 1 1.349116918598566 9.960328064627792 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 2 1.344274535264460 9.893549812702654 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 3 1.345110946680399 9.788115248535767 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 4 1.350911586830053 9.749690020118807 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 5 1.355774125978674 9.817276190013176 2009-Jan-14 18:11:54 LOG4 log_alfabeam: ALFABEAM 6 1.354815920176590 9.922472306314219 2009-Jan-14 18:11:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400005 2009-Jan-14 18:11:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:11:55 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-14 18:11:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:11:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:11:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:11:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:11:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:11:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79916.00 2009-Jan-14 18:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.110 (still bad) 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:12:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:12:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:12:06 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-14 18:12:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:12:06 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-14 18:12:06 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-14 18:12:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:12:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-14 18:12:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:12:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:12:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:12:06 LOG2 antvel: Parameters to Doppler: Topocentric 79926 2009 14 0.0 2009-Jan-14 18:12:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:12:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-14 18:12:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-14 18:12:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:12:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:12:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:12:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-14 18:12:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:12:06 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-14 18:12:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:12:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.385003 2009.0404063046619 18.999933 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000079 9.855000000000004 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 1 1.349157144318247 9.960400003820556 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 2 1.344289331548254 9.894026392045804 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 3 1.345085506893147 9.788523806131741 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 4 1.350871385662113 9.749615699125622 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 5 1.355759626480562 9.816795326643932 2009-Jan-14 18:12:06 LOG4 log_alfabeam: ALFABEAM 6 1.354841608826245 9.922069680949397 2009-Jan-14 18:12:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400006 2009-Jan-14 18:12:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:12:07 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-14 18:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:12:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:12:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:12:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:12:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79928.00 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:12:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:12:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:12:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.014 0.958 1.005 2009-Jan-14 18:12:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.899 0.993 1.021 2009-Jan-14 18:12:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.043 0.954 0.922 2009-Jan-14 18:12:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.099 0.974 0.108 2009-Jan-14 18:12:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:12:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:12:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:12:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:12:18 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-14 18:12:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:12:18 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-14 18:12:18 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-14 18:12:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:12:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-14 18:12:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:12:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:12:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:12:18 LOG2 antvel: Parameters to Doppler: Topocentric 79938 2009 14 0.0 2009-Jan-14 18:12:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:12:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-14 18:12:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-14 18:12:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:12:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:12:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:12:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-14 18:12:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:12:18 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-14 18:12:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:12:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.388345 2009.0404066849192 18.999933 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 0 1.349999999999940 9.854999999999997 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 1 1.349197362496042 9.960468532242533 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 2 1.344304295988747 9.894501317316967 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 3 1.345060245789322 9.788934120162700 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 4 1.350831190187724 9.749544789056536 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 5 1.355744955295807 9.816316069381836 2009-Jan-14 18:12:18 LOG4 log_alfabeam: ALFABEAM 6 1.354867123081405 9.921665251238773 2009-Jan-14 18:12:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400007 2009-Jan-14 18:12:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:12:19 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-14 18:12:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:12:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:12:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:12:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:12:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79940.00 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:12:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:12:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:12:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:12:30 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-14 18:12:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:12:30 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-14 18:12:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-14 18:12:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-14 18:12:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-14 18:12:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:12:30 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-14 18:12:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:12:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-14 18:12:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:12:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:12:30 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-14 18:12:30 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-14 18:12:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:12:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-14 18:12:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:12:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:12:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:12:30 LOG2 antvel: Parameters to Doppler: Topocentric 79950 2009 14 0.0 2009-Jan-14 18:12:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:12:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-14 18:12:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-14 18:12:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:12:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:12:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:12:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-14 18:12:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:12:30 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-14 18:12:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:12:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.391688 2009.0404070651762 18.999933 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000051 9.855000000000004 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 1 1.349237593206534 9.960533690091170 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 2 1.344319435745968 9.894974828503459 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 3 1.345035150446442 9.789346391980995 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 4 1.350790980344714 9.749477248764054 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 5 1.355730105388071 9.815838176592903 2009-Jan-14 18:12:30 LOG4 log_alfabeam: ALFABEAM 6 1.354892475958842 9.921258818257412 2009-Jan-14 18:12:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400008 2009-Jan-14 18:12:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:12:31 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-14 18:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:12:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:12:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:12:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79952.00 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Jan-14 18:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.566 (still bad) 2009-Jan-14 18:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Jan-14 18:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Jan-14 18:12:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.570 (still bad) 2009-Jan-14 18:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:12:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:12:42 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-14 18:12:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:12:42 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-14 18:12:42 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-14 18:12:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:12:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-14 18:12:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:12:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:12:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:12:42 LOG2 antvel: Parameters to Doppler: Topocentric 79962 2009 14 0.0 2009-Jan-14 18:12:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:12:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-14 18:12:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-14 18:12:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:12:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:12:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:12:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-14 18:12:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:12:42 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-14 18:12:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:12:42 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.395030 2009.0404074454332 18.999933 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000145 9.855000000000011 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 1 1.349277808395685 9.960595438585935 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 2 1.344334739919513 9.895446598653567 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 3 1.345010238016069 9.789760330291596 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 4 1.350750784174129 9.749413118927931 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 5 1.355715087432852 9.815361978812257 2009-Jan-14 18:12:42 LOG4 log_alfabeam: ALFABEAM 6 1.354917650093313 9.920850668734637 2009-Jan-14 18:12:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400009 2009-Jan-14 18:12:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:12:43 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-14 18:12:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:12:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:12:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:12:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79964.00 2009-Jan-14 18:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:12:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Jan-14 18:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Jan-14 18:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.555 (still bad) 2009-Jan-14 18:12:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.556 (still bad) 2009-Jan-14 18:12:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.562 (still bad) 2009-Jan-14 18:12:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:12:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:12:54 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-14 18:12:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:12:54 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-14 18:12:54 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-14 18:12:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:12:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-14 18:12:54 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:12:54 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:12:54 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:12:54 LOG2 antvel: Parameters to Doppler: Topocentric 79974 2009 14 0.0 2009-Jan-14 18:12:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:12:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-14 18:12:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-14 18:12:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:12:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:12:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:12:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-14 18:12:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:12:54 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-14 18:12:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:12:54 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.398372 2009.0404078256902 18.999933 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000021 9.854999999999999 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 1 1.349318016122220 9.960653798936150 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 2 1.344350211123838 9.895916726553757 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 3 1.344985503045994 9.790176013066915 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 4 1.350710593623476 9.749352378098781 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 5 1.355699898852895 9.814887376928009 2009-Jan-14 18:12:54 LOG4 log_alfabeam: ALFABEAM 6 1.354942650952684 9.920440725401560 2009-Jan-14 18:12:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400010 2009-Jan-14 18:12:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:12:55 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-14 18:12:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:12:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:12:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:12:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:12:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:12:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79976.00 2009-Jan-14 18:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.557 (still bad) 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:12:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.553 (still bad) 2009-Jan-14 18:12:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.555 (still bad) 2009-Jan-14 18:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Jan-14 18:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2009-Jan-14 18:13:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Jan-14 18:13:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:13:06 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-14 18:13:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:13:06 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-14 18:13:06 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-14 18:13:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:13:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-14 18:13:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:13:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:13:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:13:06 LOG2 antvel: Parameters to Doppler: Topocentric 79986 2009 14 0.0 2009-Jan-14 18:13:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:13:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-14 18:13:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-14 18:13:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:13:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:13:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:13:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-14 18:13:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:13:06 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-14 18:13:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:13:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.401715 2009.0404082059472 18.999933 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000076 9.855000000000009 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 1 1.349358224447638 9.960708789301982 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 2 1.344365852128367 9.896385309608666 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 3 1.344960940238966 9.790593519947674 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 4 1.350670400637058 9.749295007875357 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 5 1.355684536914594 9.814414273169902 2009-Jan-14 18:13:06 LOG4 log_alfabeam: ALFABEAM 6 1.354967483853441 9.920028909284238 2009-Jan-14 18:13:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400011 2009-Jan-14 18:13:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:13:07 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-14 18:13:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:13:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:13:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:13:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 79988.00 2009-Jan-14 18:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.543 (still bad) 2009-Jan-14 18:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Jan-14 18:13:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.537 1.393 1.329 1.373 2009-Jan-14 18:13:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.302 1.259 1.418 1.419 2009-Jan-14 18:13:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.436 1.470 1.365 1.240 2009-Jan-14 18:13:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.548 0.100 1.374 0.109 2009-Jan-14 18:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.542 (still bad) 2009-Jan-14 18:13:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.545 (still bad) 2009-Jan-14 18:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:18 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:13:18 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-14 18:13:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:13:18 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-14 18:13:18 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-14 18:13:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:13:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-14 18:13:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:13:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:13:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:13:18 LOG2 antvel: Parameters to Doppler: Topocentric 79998 2009 14 0.0 2009-Jan-14 18:13:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:13:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-14 18:13:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-14 18:13:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:13:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:13:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:13:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-14 18:13:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:13:18 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-14 18:13:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:13:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.405057 2009.0404085862044 18.999933 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000052 9.855000000000000 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 1 1.349398405363720 9.960760380003602 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 2 1.344381651596265 9.896852025565948 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 3 1.344936566255583 9.791012555248725 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 4 1.350630233215218 9.749241039830119 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 5 1.355669012740718 9.813942993503229 2009-Jan-14 18:13:18 LOG4 log_alfabeam: ALFABEAM 6 1.354992131909662 9.919615511658360 2009-Jan-14 18:13:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400012 2009-Jan-14 18:13:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:13:19 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-14 18:13:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:13:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.549 (still bad) 2009-Jan-14 18:13:19 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:13:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80000.00 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:13:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.546 (still bad) 2009-Jan-14 18:13:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.533 (still bad) 2009-Jan-14 18:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.530 (still bad) 2009-Jan-14 18:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.533 (still bad) 2009-Jan-14 18:13:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.537 (still bad) 2009-Jan-14 18:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:13:30 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-14 18:13:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:13:30 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-14 18:13:30 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-14 18:13:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:13:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-14 18:13:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:13:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:13:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:13:30 LOG2 antvel: Parameters to Doppler: Topocentric 80010 2009 14 0.0 2009-Jan-14 18:13:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:13:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-14 18:13:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-14 18:13:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:13:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:13:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:13:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-14 18:13:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:13:30 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-14 18:13:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:13:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.408400 2009.0404089664614 18.999933 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000048 9.855000000000000 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 1 1.349438578976978 9.960808606131309 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 2 1.344397616959775 9.897317112417753 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 3 1.344912368416519 9.791433323444483 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 4 1.350590071261809 9.749190437916768 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 5 1.355653319019150 9.813473298227478 2009-Jan-14 18:13:30 LOG4 log_alfabeam: ALFABEAM 6 1.355016607899567 9.919200330441662 2009-Jan-14 18:13:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400013 2009-Jan-14 18:13:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:13:31 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-14 18:13:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:13:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:13:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:13:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:13:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80012.00 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:13:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:13:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.529 (still bad) 2009-Jan-14 18:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:13:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Jan-14 18:13:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.530 (still bad) 2009-Jan-14 18:13:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:13:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:13:42 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-14 18:13:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:13:42 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-14 18:13:42 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-14 18:13:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:13:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-14 18:13:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:13:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:13:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:13:42 LOG2 antvel: Parameters to Doppler: Topocentric 80022 2009 14 0.0 2009-Jan-14 18:13:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:13:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-14 18:13:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-14 18:13:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:13:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:13:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:13:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-14 18:13:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:13:42 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-14 18:13:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:13:42 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.411742 2009.0404093467184 18.999933 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000031 9.855000000000004 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 1 1.349478717331568 9.960853444036525 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 2 1.344413736603173 9.897780251262338 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 3 1.344888363045228 9.791855526181404 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 4 1.350549942728838 9.749143227669164 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 5 1.355637467159926 9.813005510037055 2009-Jan-14 18:13:42 LOG4 log_alfabeam: ALFABEAM 6 1.355040895266877 9.918783659688206 2009-Jan-14 18:13:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400014 2009-Jan-14 18:13:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:13:43 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-14 18:13:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:13:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:13:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Jan-14 18:13:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80024.00 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:13:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:13:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Jan-14 18:13:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Jan-14 18:13:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2009-Jan-14 18:13:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Jan-14 18:13:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:13:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:13:54 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-14 18:13:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:13:54 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-14 18:13:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jan-14 18:13:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-14 18:13:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-14 18:13:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:13:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:13:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:13:54 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-14 18:13:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:13:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:13:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:13:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:13:54 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-14 18:13:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-14 18:13:54 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-14 18:13:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:13:54 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-14 18:13:54 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:13:54 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:13:54 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:13:54 LOG2 antvel: Parameters to Doppler: Topocentric 80034 2009 14 0.0 2009-Jan-14 18:13:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:13:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-14 18:13:54 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-14 18:13:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:13:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:13:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:13:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-14 18:13:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:13:54 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-14 18:13:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:13:54 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.415085 2009.0404097269754 18.999933 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000062 9.855000000000002 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 1 1.349518840543497 9.960894926739664 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 2 1.344430018067352 9.898241679245221 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 3 1.344864537562992 9.792279369161259 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 4 1.350509827509896 9.749099375108276 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 5 1.355621449740863 9.812539390052583 2009-Jan-14 18:13:54 LOG4 log_alfabeam: ALFABEAM 6 1.355065006691471 9.918365296074006 2009-Jan-14 18:13:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400015 2009-Jan-14 18:13:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:13:55 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-14 18:13:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:13:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:13:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:13:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:13:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-14 18:13:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80036.00 2009-Jan-14 18:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Jan-14 18:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2009-Jan-14 18:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2009-Jan-14 18:14:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Jan-14 18:14:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.134 (still bad) 2009-Jan-14 18:14:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:14:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:14:06 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-14 18:14:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:14:06 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-14 18:14:06 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-14 18:14:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:14:06 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-14 18:14:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:14:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:14:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:14:06 LOG2 antvel: Parameters to Doppler: Topocentric 80046 2009 14 0.0 2009-Jan-14 18:14:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:14:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-14 18:14:06 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-14 18:14:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:14:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:14:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:14:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-14 18:14:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:14:06 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-14 18:14:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:14:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.418427 2009.0404101072324 18.999933 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000005 9.854999999999999 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 1 1.349558920725701 9.960933036581592 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 2 1.344446449467148 9.898701080980457 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 3 1.344840907949245 9.792704551572754 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 4 1.350469753491603 9.749058899768814 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 5 1.355605278449147 9.812075257526915 2009-Jan-14 18:14:06 LOG4 log_alfabeam: ALFABEAM 6 1.355088925953656 9.917945536225064 2009-Jan-14 18:14:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400016 2009-Jan-14 18:14:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:14:07 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-14 18:14:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:14:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:14:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-14 18:14:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80048.00 2009-Jan-14 18:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:14:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Jan-14 18:14:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.127 (still bad) 2009-Jan-14 18:14:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Jan-14 18:14:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.128 1.037 0.992 1.017 2009-Jan-14 18:14:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.919 1.038 1.039 2009-Jan-14 18:14:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.044 1.063 1.007 0.944 2009-Jan-14 18:14:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 0.100 0.992 0.109 2009-Jan-14 18:14:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.130 (still bad) 2009-Jan-14 18:14:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.131 (still bad) 2009-Jan-14 18:14:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:14:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:14:18 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-14 18:14:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:14:18 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-14 18:14:18 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-14 18:14:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:14:18 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-14 18:14:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:14:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:14:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:14:18 LOG2 antvel: Parameters to Doppler: Topocentric 80058 2009 14 0.0 2009-Jan-14 18:14:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:14:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-14 18:14:18 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-14 18:14:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:14:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:14:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:14:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-14 18:14:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:14:18 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-14 18:14:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:14:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.421770 2009.0404104874897 18.999933 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000038 9.855000000000004 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 1 1.349598978001973 9.960967804495409 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 2 1.344463038452515 9.899158692736465 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 3 1.344817461728001 9.793131280332393 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 4 1.350429700559294 9.749021769756688 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 5 1.355588945752737 9.811612874431875 2009-Jan-14 18:14:18 LOG4 log_alfabeam: ALFABEAM 6 1.355112665633138 9.917524175588222 2009-Jan-14 18:14:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400017 2009-Jan-14 18:14:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:14:19 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-14 18:14:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:14:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:14:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-14 18:14:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80060.00 2009-Jan-14 18:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:14:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Jan-14 18:14:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Jan-14 18:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Jan-14 18:14:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Jan-14 18:14:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.128 (still bad) 2009-Jan-14 18:14:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:14:30 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-14 18:14:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:14:30 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-14 18:14:30 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-14 18:14:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:14:30 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-14 18:14:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:14:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:14:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:14:30 LOG2 antvel: Parameters to Doppler: Topocentric 80070 2009 14 0.0 2009-Jan-14 18:14:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:14:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-14 18:14:30 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-14 18:14:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:14:30 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:14:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:14:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-14 18:14:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:14:30 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-14 18:14:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:14:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.425112 2009.0404108677467 18.999933 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 0 1.349999999999994 9.855000000000002 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 1 1.349638984570513 9.960999218758923 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 2 1.344479772878898 9.899614202800054 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 3 1.344794214528312 9.793559252384204 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 4 1.350389696517710 9.748987998657688 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 5 1.355572463605834 9.811152556416221 2009-Jan-14 18:14:30 LOG4 log_alfabeam: ALFABEAM 6 1.355136209853558 9.917101513152398 2009-Jan-14 18:14:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400018 2009-Jan-14 18:14:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:14:31 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-14 18:14:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:14:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:14:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-14 18:14:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80072.00 2009-Jan-14 18:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Jan-14 18:14:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Jan-14 18:14:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Jan-14 18:14:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Jan-14 18:14:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:14:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:14:42 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-14 18:14:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:14:42 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-14 18:14:42 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-14 18:14:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:14:42 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-14 18:14:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:14:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:14:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:14:42 LOG2 antvel: Parameters to Doppler: Topocentric 80082 2009 14 0.0 2009-Jan-14 18:14:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:14:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-14 18:14:42 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-14 18:14:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:14:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:14:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:14:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-14 18:14:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:14:42 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-14 18:14:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:14:42 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.428455 2009.0404112480037 18.999933 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000041 9.855000000000000 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 1 1.349678960560487 9.961027308198872 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 2 1.344496660505077 9.900067846530359 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 3 1.344771153978874 9.793988675845975 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 4 1.350349721245981 9.748957556681390 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 5 1.355555824366353 9.810694066334579 2009-Jan-14 18:14:42 LOG4 log_alfabeam: ALFABEAM 6 1.355159571092122 9.916677343148011 2009-Jan-14 18:14:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400019 2009-Jan-14 18:14:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:14:43 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-14 18:14:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:14:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Jan-14 18:14:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-14 18:14:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80084.00 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Jan-14 18:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:14:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:14:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:14:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:14:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:14:54 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-14 18:14:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:14:54 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-14 18:14:54 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-14 18:14:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:14:54 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-14 18:14:54 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:14:54 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:14:54 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:14:54 LOG2 antvel: Parameters to Doppler: Topocentric 80094 2009 14 0.0 2009-Jan-14 18:14:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:14:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-14 18:14:54 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-14 18:14:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:14:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:14:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:14:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-14 18:14:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:14:54 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-14 18:14:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:14:54 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.431797 2009.0404116282607 18.999933 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000018 9.855000000000000 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 1 1.349718878271877 9.961052066967243 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 2 1.344513688938078 9.900519316035343 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 3 1.344748295353252 9.794419245631989 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 4 1.350309802450673 9.748930451525519 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 5 1.355539040245387 9.810237716077683 2009-Jan-14 18:14:54 LOG4 log_alfabeam: ALFABEAM 6 1.355182733821778 9.916251966715736 2009-Jan-14 18:14:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400020 2009-Jan-14 18:14:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:14:55 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-14 18:14:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:14:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:14:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:14:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-14 18:14:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80096.00 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:14:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:14:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:14:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:14:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:15:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:15:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:15:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:15:06 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-14 18:15:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:15:06 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-14 18:15:06 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-14 18:15:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:15:06 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-14 18:15:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:15:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:15:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:15:06 LOG2 antvel: Parameters to Doppler: Topocentric 80106 2009 14 0.0 2009-Jan-14 18:15:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:15:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-14 18:15:06 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-14 18:15:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:15:06 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:15:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:15:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-14 18:15:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:15:06 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-14 18:15:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:15:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.435140 2009.0404120085177 18.999933 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000015 9.855000000000000 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 1 1.349758757836771 9.961073521764563 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 2 1.344530866045084 9.900968845730752 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 3 1.344725626386855 9.794851171047123 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 4 1.350269920006832 9.748906655523257 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 5 1.355522103490544 9.809783269416618 2009-Jan-14 18:15:06 LOG4 log_alfabeam: ALFABEAM 6 1.355205710414838 9.915825176883414 2009-Jan-14 18:15:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400021 2009-Jan-14 18:15:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:15:07 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-14 18:15:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:15:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:15:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-14 18:15:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80108.00 2009-Jan-14 18:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:15:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:15:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:15:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:15:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:15:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.010 0.953 0.996 2009-Jan-14 18:15:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.898 0.988 1.017 2009-Jan-14 18:15:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.005 1.036 0.940 0.916 2009-Jan-14 18:15:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.099 0.976 0.108 2009-Jan-14 18:15:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:15:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:18 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:15:18 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-14 18:15:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:15:18 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-14 18:15:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-14 18:15:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-14 18:15:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-14 18:15:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:15:18 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-14 18:15:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:15:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-14 18:15:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:15:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:15:18 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-14 18:15:18 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-14 18:15:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:15:18 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-14 18:15:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:15:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:15:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:15:18 LOG2 antvel: Parameters to Doppler: Topocentric 80118 2009 14 0.0 2009-Jan-14 18:15:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:15:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-14 18:15:18 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-14 18:15:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:15:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:15:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:15:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-14 18:15:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:15:18 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-14 18:15:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:15:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.438482 2009.0404123887749 18.999933 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000021 9.855000000000004 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 1 1.349798571672691 9.961091672544025 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 2 1.344548179195797 9.901416131685250 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 3 1.344703161992955 9.795284145191674 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 4 1.350230101507401 9.748886170554947 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 5 1.355505026559015 9.809331034338758 2009-Jan-14 18:15:18 LOG4 log_alfabeam: ALFABEAM 6 1.355228485698948 9.915397276730847 2009-Jan-14 18:15:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400022 2009-Jan-14 18:15:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:15:19 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-14 18:15:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:15:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-14 18:15:19 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-14 18:15:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80120.00 2009-Jan-14 18:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:15:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.571 (still bad) 2009-Jan-14 18:15:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.569 (still bad) 2009-Jan-14 18:15:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Jan-14 18:15:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.572 (still bad) 2009-Jan-14 18:15:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Jan-14 18:15:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:15:30 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-14 18:15:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:15:30 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-14 18:15:30 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-14 18:15:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:15:30 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-14 18:15:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:15:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:15:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:15:30 LOG2 antvel: Parameters to Doppler: Topocentric 80130 2009 14 0.0 2009-Jan-14 18:15:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:15:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-14 18:15:30 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-14 18:15:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:15:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:15:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:15:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-14 18:15:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:15:30 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-14 18:15:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:15:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.441824 2009.0404127690319 18.999933 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000015 9.855000000000006 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 1 1.349838328025627 9.961106539900459 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 2 1.344565631123569 9.901861274462638 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 3 1.344680896648575 9.795718248484974 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 4 1.350190338714759 9.748868975752401 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 5 1.355487806762106 9.808880909935155 2009-Jan-14 18:15:30 LOG4 log_alfabeam: ALFABEAM 6 1.355251065212425 9.914968186664435 2009-Jan-14 18:15:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400023 2009-Jan-14 18:15:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:15:31 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-14 18:15:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:15:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-14 18:15:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-14 18:15:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80132.00 2009-Jan-14 18:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.567 (still bad) 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:15:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Jan-14 18:15:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.562 (still bad) 2009-Jan-14 18:15:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2009-Jan-14 18:15:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Jan-14 18:15:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:15:42 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-14 18:15:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:15:42 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-14 18:15:42 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-14 18:15:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:15:42 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-14 18:15:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:15:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:15:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:15:42 LOG2 antvel: Parameters to Doppler: Topocentric 80142 2009 14 0.0 2009-Jan-14 18:15:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:15:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-14 18:15:42 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-14 18:15:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:15:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:15:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:15:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-14 18:15:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:15:42 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-14 18:15:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:15:42 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.445167 2009.040413149289 18.999933 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000022 9.855000000000006 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 1 1.349878035106680 9.961118141381954 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 2 1.344583224699148 9.902304372840133 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 3 1.344658825005463 9.796153562601768 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 4 1.350150623424976 9.748855053296760 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 5 1.355470441270703 9.808432797050056 2009-Jan-14 18:15:42 LOG4 log_alfabeam: ALFABEAM 6 1.355273454322301 9.914537825790365 2009-Jan-14 18:15:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400024 2009-Jan-14 18:15:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:15:43 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-14 18:15:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:15:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-14 18:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.564 (still bad) 2009-Jan-14 18:15:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-14 18:15:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80144.00 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.556 (still bad) 2009-Jan-14 18:15:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2009-Jan-14 18:15:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.555 (still bad) 2009-Jan-14 18:15:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.557 (still bad) 2009-Jan-14 18:15:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.565 (still bad) 2009-Jan-14 18:15:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:15:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:15:54 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-14 18:15:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:15:54 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-14 18:15:54 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-14 18:15:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:15:54 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-14 18:15:54 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:15:54 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:15:54 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:15:54 LOG2 antvel: Parameters to Doppler: Topocentric 80154 2009 14 0.0 2009-Jan-14 18:15:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:15:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-14 18:15:54 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-14 18:15:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:15:54 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:15:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:15:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-14 18:15:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:15:54 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-14 18:15:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:15:54 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.448509 2009.040413529546 18.999933 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000037 9.855000000000006 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 1 1.349917665537931 9.961126485485881 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 2 1.344600946956767 9.902745129068975 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 3 1.344636961428952 9.796589778326911 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 4 1.350110983031196 9.748844396496400 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 5 1.355452942889783 9.807986997563575 2009-Jan-14 18:15:54 LOG4 log_alfabeam: ALFABEAM 6 1.355295638395683 9.914106499697134 2009-Jan-14 18:15:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400025 2009-Jan-14 18:15:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:15:55 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-14 18:15:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:15:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-14 18:15:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:15:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.557 (still bad) 2009-Jan-14 18:15:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-14 18:15:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80156.00 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:15:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.544 (still bad) 2009-Jan-14 18:15:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.548 (still bad) 2009-Jan-14 18:15:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.545 (still bad) 2009-Jan-14 18:16:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.544 (still bad) 2009-Jan-14 18:16:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.550 (still bad) 2009-Jan-14 18:16:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:16:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:16:06 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-14 18:16:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:16:06 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-14 18:16:06 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-14 18:16:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:16:06 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-14 18:16:06 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:16:06 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:16:06 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:16:06 LOG2 antvel: Parameters to Doppler: Topocentric 80166 2009 14 0.0 2009-Jan-14 18:16:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:16:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-14 18:16:06 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-14 18:16:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:16:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:16:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-14 18:16:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:16:06 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-14 18:16:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:16:06 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.451852 2009.040413909803 18.999933 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000010 9.854999999999997 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 1 1.349957239448774 9.961131593504648 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 2 1.344618806035196 9.903183775044329 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 3 1.344615293932308 9.797027107863117 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 4 1.350071397409024 9.748836983086317 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 5 1.355435303592023 9.807543277698185 2009-Jan-14 18:16:06 LOG4 log_alfabeam: ALFABEAM 6 1.355317629532787 9.913673998473016 2009-Jan-14 18:16:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400026 2009-Jan-14 18:16:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:16:07 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-14 18:16:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-14 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-14 18:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2009-Jan-14 18:16:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80168.00 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:16:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:16:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Jan-14 18:16:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.530 (still bad) 2009-Jan-14 18:16:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.530 (still bad) 2009-Jan-14 18:16:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:16:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.518 1.383 1.310 1.362 2009-Jan-14 18:16:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.295 1.247 1.390 1.409 2009-Jan-14 18:16:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.413 1.457 1.332 1.223 2009-Jan-14 18:16:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.536 0.099 1.363 0.109 2009-Jan-14 18:16:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:16:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:16:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:16:18 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-14 18:16:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:16:18 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-14 18:16:18 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-14 18:16:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:16:18 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-14 18:16:18 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:16:18 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:16:18 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:16:18 LOG2 antvel: Parameters to Doppler: Topocentric 80178 2009 14 0.0 2009-Jan-14 18:16:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:16:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-14 18:16:18 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-14 18:16:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:16:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:16:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:16:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-14 18:16:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:16:18 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-14 18:16:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:16:18 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.455194 2009.0404142900602 18.999933 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000023 9.855000000000006 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 1 1.349996729616295 9.961133479513931 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 2 1.344636788759484 9.903620017286800 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 3 1.344593836511781 9.797465240720843 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 4 1.350031893800107 9.748832800775570 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 5 1.355417536400220 9.807101935107449 2009-Jan-14 18:16:18 LOG4 log_alfabeam: ALFABEAM 6 1.355339413465001 9.913240629112702 2009-Jan-14 18:16:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400027 2009-Jan-14 18:16:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:16:19 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-14 18:16:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:16:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-14 18:16:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-14 18:16:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80180.00 2009-Jan-14 18:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:16:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.528 (still bad) 2009-Jan-14 18:16:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:16:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:16:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Jan-14 18:16:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:16:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:16:30 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-14 18:16:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:16:30 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-14 18:16:30 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-14 18:16:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:16:30 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-14 18:16:30 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:16:30 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04041 J 2009-Jan-14 18:16:30 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:16:30 LOG2 antvel: Parameters to Doppler: Topocentric 80190 2009 14 0.0 2009-Jan-14 18:16:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:16:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-14 18:16:30 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-14 18:16:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:16:30 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:16:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:16:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-14 18:16:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-14 18:16:30 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-14 18:16:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:16:30 LOG5 log_alfabeam: Parameters: 1.3500000000000001 9.8550000000000004 1.458537 2009.0404146703172 18.999933 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 0 1.350000000000030 9.855000000000008 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 1 1.350036156164038 9.961132162604491 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 2 1.344654903376839 9.904054086613467 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 3 1.344572577296247 9.797904390230311 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 4 1.349992452084974 9.748831829498581 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 5 1.355399633177124 9.806662737063689 2009-Jan-14 18:16:30 LOG4 log_alfabeam: ALFABEAM 6 1.355361002179204 9.912806180558908 2009-Jan-14 18:16:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901400028 2009-Jan-14 18:16:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-14 18:16:31 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-14 18:16:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:16:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-14 18:16:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-14 18:16:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80192.00 2009-Jan-14 18:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:16:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.527 (still bad) 2009-Jan-14 18:16:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:16:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.529 (still bad) 2009-Jan-14 18:16:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.529 (still bad) 2009-Jan-14 18:16:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:16:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Jan-14 18:16:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:16:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-14 18:16:42 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-14 18:16:42 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 INFO2 smartfreq: Switching off CAL 2009-Jan-14 18:16:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:16:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:16:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:16:42 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:16:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:16:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:16:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:16:42 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 INFO3 restore_frequencies: Restoring original frequencies 2009-Jan-14 18:16:42 LOG5 antvel: Calling 'antvel 12100.000000 95118.000000 J Topocentric 0' 2009-Jan-14 18:16:42 LOG2 antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04042 J 2009-Jan-14 18:16:42 LOG2 antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:16:42 LOG2 antvel: Parameters to Doppler: Topocentric 80202 2009 14 0.0 2009-Jan-14 18:16:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:16:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-14 18:16:42 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-14 18:16:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:16:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:16:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:16:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:42 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jan-14 18:16:42 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jan-14 18:16:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:16:42 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jan-14 18:16:42 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-14 18:16:42 NOTE run_command_file: DONE with command file processing 2009-Jan-14 18:16:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jan-14 18:16:43 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-14 18:16:43 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-14 18:16:43 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Jan-14 18:16:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:16:43 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Jan-14 18:16:43 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-14 18:16:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:16:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.529 (still bad) 2009-Jan-14 18:17:02 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-14 18:17:02 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-14 18:17:02 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-14 18:17:02 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-14 18:17:02 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-14 18:17:02 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-14 18:17:02 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-14 18:17:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-14 18:17:03 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-14 18:17:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-14 18:17:03 LOG3 exec_msg: Closing socket 2009-Jan-14 18:17:03 LOG3 exec_msg: Closing socket 2009-Jan-14 18:17:03 LOG3 exec_msg: Closing socket 2009-Jan-14 18:17:03 LOG3 exec_msg: Closing socket 2009-Jan-14 18:17:05 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-14 18:17:05 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-14 18:17:05 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-14 18:17:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-14 18:17:28 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Jan-14 18:17:28 LOG2 CIMA-antvel: Precessing RA = 01:21:00.0 Dec = +09:51:18.0 Epoch = 2009.04042 J 2009-Jan-14 18:17:28 LOG2 CIMA-antvel: Computed apparent RA = 01:21:29.3 Dec = +09:54:15.2 2009-Jan-14 18:17:28 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80248 2009 14 0.0 2009-Jan-14 18:17:28 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-14 18:17:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-14 18:17:30 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jan-14 18:17:30 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jan-14 18:17:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-14 18:17:30 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-14 18:17:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-14 18:17:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-14 18:17:30 LOG1 config_iflo: Receiver ALFA already selected 2009-Jan-14 18:17:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:17:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:17:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:17:30 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-14 18:17:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:17:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:17:30 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-14 18:17:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:17:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:17:30 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jan-14 18:17:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jan-14 18:17:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-14 18:17:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jan-14 18:17:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jan-14 18:17:30 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jan-14 18:17:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-14 18:17:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:17:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-14 18:17:30 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:17:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:17:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jan-14 18:17:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-14 18:17:31 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-14 18:17:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-14 18:17:31 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-14 18:17:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:17:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-14 18:17:31 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-14 18:17:31 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jan-14 18:17:31 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jan-14 18:17:31 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-14 18:17:31 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-14 18:17:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-14 18:17:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-14 18:17:31 START begin_task: Starting task 'selecting calibration port' 2009-Jan-14 18:17:31 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-14 18:17:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-14 18:17:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:17:31 START begin_task: Starting task 'waiting on calport' 2009-Jan-14 18:17:31 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-14 18:17:31 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Jan-14 18:17:31 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-14 18:17:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:17:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:17:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-14 18:17:32 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-14 18:17:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-14 18:17:32 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:17:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:17:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:17:32 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:17:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:17:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:17:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:17:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:17:32 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:17:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:17:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-14 18:17:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-14 18:17:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:17:32 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-14 18:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-14 18:17:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:17:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:17:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:17:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:17:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:17:32 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jan-14 18:17:32 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-14 18:17:32 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-14 18:17:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:17:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-14 18:17:32 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-14 18:17:32 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Jan-14 18:17:32 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Jan-14 18:17:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:17:32 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-14 18:17:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-14 18:17:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-14 18:17:32 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:17:32 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-14 18:17:32 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-14 18:17:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:17:33 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-14 18:17:33 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-14 18:17:33 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Jan-14 18:17:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-14 18:17:33 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-14 18:18:07 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-14 18:18:07 LOG4 exec_msg: From OBSERVER: track_new_source drift41p2 013000.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-14 18:18:07 LOG1 track_new_source: Calling 'track_new_source drift41p2 013000.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-14 18:18:07 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-14 18:18:07 LOG5 begin_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Selecting source 'drift41p2' ...} 2009-Jan-14 18:18:07 LOG3 track_source: Calling 'track_source drift41p2 013000.0 +095118 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-14 18:18:07 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:18:07 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2009-Jan-14 18:18:07 INFO1 track_source: Starting to track drift41p2 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: set ra 013000.0 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: set dec +095118 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: pnt tr 013000.0 +095118 -CJ 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:18:07 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:18:07 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:18:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:18:07 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-14 18:18:07 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-14 18:18:07 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-14 18:18:07 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:18:07 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-14 18:18:07 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:18:07 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-14 18:18:07 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-14 18:18:07 LOG5 finish_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 DONE finish_task: DONE finished selecting: new source 2009-Jan-14 18:18:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:18:07 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-14 18:18:07 LOG5 end_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: set ra 013000.0 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: set dec +095118 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: vw% 013000.0 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: vw% +095118 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: pnt tr 013000.0 +095118 -CJ 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-14 18:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:42 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Jan-14 18:18:42 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Jan-14 18:18:42 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:18:42 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-14 18:18:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-14 18:18:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-14 18:18:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-14 18:18:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-14 18:18:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:18:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-14 18:18:42 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-14 18:18:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-14 18:18:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:18:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-14 18:18:45 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-14 18:18:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-14 18:18:45 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:18:45 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-14 18:18:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-14 18:18:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:18:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:18:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:18:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:18:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-14 18:18:45 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-14 18:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-14 18:18:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2009-Jan-14 18:18:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-14 18:18:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-14 18:18:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2009-Jan-14 18:18:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-14 18:18:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-14 18:18:46 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-14 18:18:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.099 1.017 ALFA beam 1: 0.964 1.005 2009-Jan-14 18:18:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.936 0.905 ALFA beam 3: 0.983 1.006 2009-Jan-14 18:18:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.998 1.032 ALFA beam 5: 0.965 0.926 2009-Jan-14 18:18:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.078 0.096 ALFA beam 7: 0.962 0.106 2009-Jan-14 18:18:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:18:46 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-14 18:18:46 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Jan-14 18:18:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:18:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:18:46 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-14 18:18:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Jan-14 18:18:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:18:46 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-14 18:18:46 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-14 18:18:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-14 18:18:46 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:18:46 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-14 18:18:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.096 < 0.75)! 2009-Jan-14 18:18:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.017 0.964 1.005 2009-Jan-14 18:18:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.905 0.983 1.006 2009-Jan-14 18:18:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.032 0.965 0.926 2009-Jan-14 18:18:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.096 0.962 0.106 2009-Jan-14 18:18:55 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Jan-14 18:18:55 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift41p2 013000.0 +095118 J 0 Topocentric velocity(optical) 2009-Jan-14 18:18:55 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift41p2 013000.0 +095118 J 0 Topocentric velocity(optical)' 2009-Jan-14 18:18:55 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jan-14 18:18:55 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-14 18:18:55 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift41p2' 2009-Jan-14 18:18:55 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jan-14 18:18:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift41p2} 2009-Jan-14 18:18:55 INFO5 fixed_driftmap: Start: year = 2009.0404192650899 RA = 01:30:29.4 Dec = +09:54:12.8 2009-Jan-14 18:18:55 NOTE fixed_driftmap: Setting ZA to 8:27:00.9 ... 2009-Jan-14 18:18:55 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 8.45 2009-Jan-14 18:18:55 LOG3 track_source: Calling 'track_source drift41p2 360.0 8.4502619069 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Jan-14 18:18:55 START begin_task: Starting task 'sending tracking commands' 2009-Jan-14 18:18:55 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-14 18:18:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift41p2} INFO {Slewing to source 'drift41p2' ...} 2009-Jan-14 18:18:55 INFO1 track_source: Starting to track drift41p2 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: set dec 8.4502619069 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: pnt tr 360.0 8.4502619069 -CF 2009-Jan-14 18:18:55 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:18:55 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-14 18:18:55 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-14 18:18:55 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-14 18:18:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:18:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-14 18:18:55 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-14 18:18:55 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:18:55 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-14 18:18:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-14 18:18:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-14 18:18:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Jan-14 18:18:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-14 18:18:56 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-14 18:18:56 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift41p2" 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: set dec 8.4502619069 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: vw% 8.4502619069 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 8.4502619069 -CF 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-14 18:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:18:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-14 18:18:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-14 18:18:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-14 18:18:56 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-14 18:18:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-14 18:18:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-14 18:18:56 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-14 18:18:56 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-14 18:18:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:18:56 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-14 18:18:56 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-14 18:18:56 START begin_task: Starting task 'waiting on telescope' 2009-Jan-14 18:18:56 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-14 18:18:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-14 18:18:56 LOG3 waittrk: Start waittrk 5 2009-Jan-14 18:18:56 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-14 18:18:56 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-14 18:19:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-14 18:19:01 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-14 18:19:01 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-14 18:19:01 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-14 18:19:12 INFO2 waittrk: Now tracking drift41p2 2009-Jan-14 18:19:12 LOG4 waittrk: Current telescope position: Az = 359.62 ZA = 8.41 2009-Jan-14 18:19:12 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-14 18:19:12 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jan-14 18:19:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 START begin_task: Starting task 'selecting calibration type' 2009-Jan-14 18:19:12 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-14 18:19:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-14 18:19:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:19:12 START begin_task: Starting task 'waiting on setcal' 2009-Jan-14 18:19:12 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-14 18:19:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:19:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-14 18:19:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:19:12 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-14 18:19:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:19:12 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:19:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-14 18:19:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:19:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:19:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:19:12 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:19:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:19:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-14 18:19:12 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG5 dopset_later: Calling 'dopset_later 16.19567082970649' 2009-Jan-14 18:19:12 INFO3 dopset_later: Setting Doppler correction for 18:19:28 (16.2 seconds from now) 2009-Jan-14 18:19:12 LOG5 antvel: Calling 'antvel 360.000000 8.450262 F Topocentric 16.19567082970649' 2009-Jan-14 18:19:12 LOG2 antvel: Transforming current Az = 360.00 ZA = 8.45 to apparent RA = 01:30:29.4 Dec = +09:54:12.8 2009-Jan-14 18:19:12 LOG2 antvel: Parameters to Doppler: Topocentric 80368 2009 14 0.0 2009-Jan-14 18:19:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-14 18:19:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-14 18:19:12 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-14 18:19:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-14 18:19:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-14 18:19:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:19:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:19:12 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:19:12 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-14 18:19:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-14 18:19:12 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-14 18:19:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-14 18:19:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-14 18:19:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:19:13 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-14 18:19:13 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:19:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-14 18:19:13 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-14 18:19:13 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-14 18:19:13 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-14 18:19:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:19:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:19:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:19:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-14 18:19:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-14 18:19:13 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-14 18:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:19:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 5 dB 2009-Jan-14 18:19:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-14 18:19:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-14 18:19:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2009-Jan-14 18:19:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-14 18:19:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-14 18:19:13 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 1.017 ALFA beam 1: 0.962 1.006 2009-Jan-14 18:19:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.935 0.902 ALFA beam 3: 1.000 1.027 2009-Jan-14 18:19:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.012 1.051 ALFA beam 5: 0.963 0.924 2009-Jan-14 18:19:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.101 0.099 ALFA beam 7: 0.977 0.108 2009-Jan-14 18:19:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:19:13 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-14 18:19:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-14 18:19:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:19:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:19:14 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-14 18:19:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-14 18:19:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-14 18:19:14 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-14 18:19:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-14 18:19:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:19:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-14 18:19:14 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-14 18:19:14 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 01:30:29.4 LST = 01:30:14.2 diff = 15.2 secs 2009-Jan-14 18:19:14 INFO2 fixed_driftmap: Waiting 13.2 seconds for RA 1:30:29 2009-Jan-14 18:19:14 INFO2 lstwait: Waiting for 13.2 secs from LST 01:30:14 to LST 01:30:27 ... 2009-Jan-14 18:19:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.199474043466473 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jan-14 18:19:14 START begin_task: Starting task 'waiting on wait on LST' 2009-Jan-14 18:19:14 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-14 18:19:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:19:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.017 0.962 1.006 2009-Jan-14 18:19:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.902 1.000 1.027 2009-Jan-14 18:19:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.051 0.963 0.924 2009-Jan-14 18:19:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.099 0.977 0.108 2009-Jan-14 18:19:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jan-14 18:19:27 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-14 18:19:27 LOG4 lstwait: Finished waiting 0.80 seconds late 2009-Jan-14 18:19:27 INFO3 lstwait: Finished waiting 2009-Jan-14 18:19:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-14 18:19:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:19:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:19:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:19:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:19:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Jan-14 18:19:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-14 18:19:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-14 18:19:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-14 18:19:27 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-14 18:19:27 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-14 18:19:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-14 18:19:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-14 18:19:27 INFO2 take_data: Starting WAPP 600-second scan: 901400029 2009-Jan-14 18:19:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-14 18:19:28 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-14 18:19:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:19:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20090114.a2010.0001.fits 2009-Jan-14 18:19:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:19:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090114.a2010.0001.fits} 2009-Jan-14 18:19:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-14 18:19:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80369.00 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:19:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:19:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:19:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:19:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:19:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:19:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:19:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:19:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:19:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:19:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:19:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:19:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:19:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:19:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:19:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:19:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:20:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:20:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:20:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.019 0.959 1.002 2009-Jan-14 18:20:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.904 1.003 1.029 2009-Jan-14 18:20:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.051 0.962 0.926 2009-Jan-14 18:20:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.099 0.975 0.108 2009-Jan-14 18:20:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:20:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:20:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:20:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:20:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:20:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:20:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:20:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:20:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:20:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:20:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:20:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:20:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:20:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:20:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:20:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:20:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:21:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:21:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:21:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:21:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:21:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:21:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:21:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.019 0.957 1.005 2009-Jan-14 18:21:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.903 1.001 1.024 2009-Jan-14 18:21:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.047 0.963 0.925 2009-Jan-14 18:21:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.099 0.974 0.108 2009-Jan-14 18:21:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:21:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:21:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:21:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:21:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:21:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:21:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:21:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:22:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:22:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:22:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.022 0.958 1.003 2009-Jan-14 18:22:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.899 1.001 1.028 2009-Jan-14 18:22:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.056 0.961 0.925 2009-Jan-14 18:22:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.099 0.974 0.108 2009-Jan-14 18:22:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:22:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:22:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:23:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Jan-14 18:23:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:23:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.025 0.957 1.007 2009-Jan-14 18:23:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.903 1.001 1.026 2009-Jan-14 18:23:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.056 0.962 0.926 2009-Jan-14 18:23:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.099 0.975 0.108 2009-Jan-14 18:23:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:23:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:23:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:23:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:23:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:23:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:23:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:23:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:23:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:23:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Jan-14 18:24:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:24:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.022 0.959 1.008 2009-Jan-14 18:24:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.901 1.003 1.028 2009-Jan-14 18:24:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.058 0.962 0.926 2009-Jan-14 18:24:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.099 0.974 0.108 2009-Jan-14 18:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:24:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:24:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:24:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:24:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:24:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:25:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Jan-14 18:25:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Jan-14 18:25:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Jan-14 18:25:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Jan-14 18:25:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2009-Jan-14 18:25:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:25:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.028 0.963 1.009 2009-Jan-14 18:25:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.907 1.009 1.035 2009-Jan-14 18:25:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.063 0.967 0.930 2009-Jan-14 18:25:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.099 0.982 0.108 2009-Jan-14 18:25:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:25:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:25:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:25:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:26:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:26:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:26:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:26:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:26:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.019 0.959 1.003 2009-Jan-14 18:26:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.902 1.000 1.026 2009-Jan-14 18:26:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.052 0.961 0.925 2009-Jan-14 18:26:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.099 0.971 0.108 2009-Jan-14 18:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:26:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:26:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:26:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:26:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:26:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:26:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:26:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:26:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:27:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:27:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:27:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:27:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:27:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:27:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:27:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:27:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.017 0.960 1.004 2009-Jan-14 18:27:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.900 1.000 1.027 2009-Jan-14 18:27:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.057 0.960 0.923 2009-Jan-14 18:27:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.099 0.973 0.108 2009-Jan-14 18:27:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:27:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:27:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:27:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:28:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:28:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:28:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:28:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:28:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:28:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:28:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:28:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.016 0.958 1.002 2009-Jan-14 18:28:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.900 1.003 1.027 2009-Jan-14 18:28:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.053 0.960 0.923 2009-Jan-14 18:28:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.099 0.971 0.108 2009-Jan-14 18:28:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:28:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-14 18:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Jan-14 18:28:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:28:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:29:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:29:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:29:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Jan-14 18:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:29:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:29:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:29:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:29:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.016 0.959 1.002 2009-Jan-14 18:29:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.896 1.004 1.028 2009-Jan-14 18:29:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.060 0.960 0.919 2009-Jan-14 18:29:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.099 0.972 0.108 2009-Jan-14 18:29:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:29:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-14 18:29:29 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-14 18:29:29 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 LOG1 fixed_driftmap: New position: year = 2009.0404393553376 RA = 01:40:03.2 RA/Dec = 01:40:32.7 +09:54:09.7 2009-Jan-14 18:29:29 NOTE fixed_driftmap: Correcting ZA to 8:27:04.0 ... 2009-Jan-14 18:29:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 8.4511182975 -CF 2009-Jan-14 18:29:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-14 18:29:29 START begin_task: Starting task 'WAPP calibration' 2009-Jan-14 18:29:29 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-14 18:29:29 START begin_task: Starting task 'selecting calibration type' 2009-Jan-14 18:29:29 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-14 18:29:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-14 18:29:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:29:29 START begin_task: Starting task 'waiting on setcal' 2009-Jan-14 18:29:29 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 8.4511182975 -CF 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:29:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-14 18:29:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-14 18:29:29 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-14 18:29:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-14 18:29:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:29:29 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-14 18:29:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:29:29 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-14 18:29:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:29:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:29:30 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:29:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-14 18:29:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-14 18:29:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:29:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-14 18:29:30 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-14 18:29:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-14 18:29:30 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-14 18:29:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-14 18:29:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-14 18:29:30 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-14 18:29:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-14 18:29:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-14 18:29:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:29:30 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:29:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-14 18:29:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:29:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:29:30 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-14 18:29:30 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-14 18:29:30 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-14 18:29:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-14 18:29:30 INFO2 take_data: Starting WAPP 1-second scan: 901400030 2009-Jan-14 18:29:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-14 18:29:30 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-14 18:29:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:29:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-14 18:29:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80971.00 2009-Jan-14 18:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:29:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:29:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-14 18:29:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-14 18:29:32 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-14 18:29:32 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-14 18:29:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-14 18:29:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-14 18:29:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-14 18:29:32 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-14 18:29:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-14 18:29:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-14 18:29:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-14 18:29:32 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-14 18:29:32 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-14 18:29:32 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-14 18:29:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-14 18:29:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-14 18:29:32 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-14 18:29:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Jan-14 18:29:32 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-14 18:29:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Jan-14 18:29:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Jan-14 18:29:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Jan-14 18:29:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Jan-14 18:29:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-14 18:29:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-14 18:29:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-14 18:29:33 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-14 18:29:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-14 18:29:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-14 18:29:33 INFO2 take_data: Starting WAPP 600-second scan: 901400031 2009-Jan-14 18:29:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-14 18:29:33 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-14 18:29:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Jan-14 18:29:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-14 18:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:29:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-14 18:29:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80974.00 2009-Jan-14 18:29:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20090114.a2010.0002.fits 2009-Jan-14 18:29:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090114.a2010.0002.fits} 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770235 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.604805 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.647802 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-14 18:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2009-Jan-14 18:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2009-Jan-14 18:29:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:29:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Jan-14 18:29:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:29:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:29:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:29:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:30:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-14 18:30:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:30:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:30:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:30:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Jan-14 18:30:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:30:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:30:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Jan-14 18:30:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.021 0.963 1.005 2009-Jan-14 18:30:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.899 1.004 1.027 2009-Jan-14 18:30:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.061 0.964 0.927 2009-Jan-14 18:30:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.099 0.973 0.108 2009-Jan-14 18:30:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Jan-14 18:30:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:30:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Jan-14 18:30:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Jan-14 18:30:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2009-Jan-14 18:30:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-14 18:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.097 (still bad) 2009-Jan-14 18:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and