2009-Jan-13 18:18:40 BEGIN executive: CIMA executive starting ... 2009-Jan-13 18:18:40 NOTE executive: STARTING NEW CIMA SESSION 2009-Jan-13 18:18:40 INFO1 executive: Using CIMA version 3.1.02 'smart' from 2008-12-29 17:19 2009-Jan-13 18:18:40 INFO4 executive: This is an ON-LINE session 2009-Jan-13 18:18:40 INFO4 executive: This is a LOCAL session 2009-Jan-13 18:18:40 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jan-13 18:18:40 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Sabrina Stierwalt' 2009-Jan-13 18:18:40 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090113' 2009-Jan-13 18:18:41 LOG2 log_preferences: Currently applied preferences: 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(datawindow) = open 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(logcolours) = full 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(displayformat) = long 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(logformat) = new 2009-Jan-13 18:18:41 LOG2 log_preferences: prefs(fontsize) = 3 2009-Jan-13 18:18:41 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-13 18:18:41 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-13 18:18:41 ALERT executive: CIMA executive ready 2009-Jan-13 18:18:42 NOTE frontend: CIMA frontend ready 2009-Jan-13 18:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:18:45 LOG4 got_cormsg: From DATATAKING: setup 2009-Jan-13 18:18:48 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jan-13 18:18:48 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Jan-13 18:18:48 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Jan-13 18:18:48 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-13 18:18:48 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-13 18:18:48 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-13 18:18:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-13 18:18:48 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-13 18:18:48 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-13 18:18:48 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-13 18:18:48 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-13 18:18:48 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-13 18:18:48 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Jan-13 18:18:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:18:48 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-13 18:18:48 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Jan-13 18:18:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jan-13 18:18:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:18:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:18:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-13 18:18:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-13 18:18:54 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-13 18:18:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-13 18:18:54 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-13 18:18:55 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-13 18:18:55 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-13 18:18:55 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-13 18:18:55 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-13 18:18:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-13 18:18:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-13 18:18:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-13 18:18:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-13 18:18:58 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-13 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:16 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Jan-13 18:19:34 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Jan-13 18:19:34 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jan-13 18:19:34 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Jan-13 18:19:34 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Jan-13 18:19:34 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-13 18:19:34 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-13 18:19:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Jan-13 18:19:34 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Jan-13 18:19:35 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Jan-13 18:19:35 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-13 18:19:35 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jan-13 18:19:35 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-13 18:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-13 18:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-13 18:19:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-13 18:19:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-13 18:19:37 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-13 18:19:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-13 18:19:37 INFO1 config_iflo: Selecting receiver ALFA 2009-Jan-13 18:19:37 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jan-13 18:19:37 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jan-13 18:19:37 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-13 18:19:37 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-13 18:19:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-13 18:19:37 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-13 18:19:37 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-13 18:19:37 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jan-13 18:19:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:19:37 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-13 18:19:37 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jan-13 18:19:37 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jan-13 18:19:37 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jan-13 18:19:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jan-13 18:19:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:19:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:19:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:19:37 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:19:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:19:37 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-13 18:19:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:19:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-13 18:19:37 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-13 18:19:37 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-13 18:19:38 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jan-13 18:19:38 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-13 18:19:38 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jan-13 18:19:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-13 18:19:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:19:38 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-13 18:19:38 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jan-13 18:19:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:19:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:19:53 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-13 18:19:53 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-13 18:19:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-13 18:19:53 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-13 18:19:53 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-13 18:19:53 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-13 18:19:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:19:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-13 18:19:54 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-13 18:19:54 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-13 18:19:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-13 18:19:54 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-13 18:19:54 START begin_task: Starting task 'selecting calibration port' 2009-Jan-13 18:19:54 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-13 18:19:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-13 18:19:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:19:54 START begin_task: Starting task 'waiting on calport' 2009-Jan-13 18:19:54 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:19:54 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-13 18:19:54 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-13 18:19:54 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-13 18:19:54 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:19:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:19:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:19:54 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:19:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:19:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:19:54 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:54 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-13 18:19:54 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-13 18:19:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:19:54 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:19:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:19:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:19:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:19:54 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-13 18:19:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:19:55 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-13 18:19:55 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-13 18:19:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:19:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-13 18:19:55 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Jan-13 18:19:55 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Jan-13 18:19:55 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Jan-13 18:19:55 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Jan-13 18:19:55 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jan-13 18:19:55 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jan-13 18:19:55 LOG3 track_source: Calling 'track_source galfasrc 012700.0 +115524 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-13 18:19:55 START begin_task: Starting task 'sending tracking commands' 2009-Jan-13 18:19:55 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jan-13 18:19:55 INFO1 track_source: Starting to track galfasrc 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: set ra 012700.0 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: set dec +115524 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: pnt tr 012700.0 +115524 -CJ 2009-Jan-13 18:19:55 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:19:55 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-13 18:19:55 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-13 18:19:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:19:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-13 18:19:55 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jan-13 18:19:55 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-13 18:19:55 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jan-13 18:19:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:19:55 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jan-13 18:19:55 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-13 18:19:56 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Jan-13 18:19:56 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jan-13 18:19:56 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:19:56 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-13 18:19:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-13 18:19:56 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-13 18:19:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-13 18:19:56 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-13 18:19:56 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-13 18:19:56 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-13 18:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:19:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20090113.a2010.0043.fits 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-13 18:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-13 18:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-13 18:19:56 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090113.a2010.0043.fits} 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: set ra 012700.0 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: set dec +115524 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: vw% 012700.0 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: vw% +115524 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: pnt tr 012700.0 +115524 -CJ 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-13 18:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:20:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-13 18:20:07 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-13 18:20:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-13 18:20:07 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-13 18:20:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-13 18:20:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:20:07 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-13 18:20:07 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-13 18:20:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:20:07 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-13 18:20:07 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-13 18:20:07 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Jan-13 18:20:08 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jan-13 18:20:08 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-13 18:20:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-13 18:20:08 LOG3 waittrk: Start waittrk 5 2009-Jan-13 18:20:08 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-13 18:20:08 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-13 18:20:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-13 18:20:13 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-13 18:20:13 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-13 18:20:13 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-13 18:20:14 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-13 18:20:14 INFO2 waittrk: Now tracking galfasrc 2009-Jan-13 18:20:14 LOG4 waittrk: Current telescope position: Az = 359.20 ZA = 6.34 2009-Jan-13 18:20:14 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-13 18:20:14 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 DONE finish_task: DONE finished waiting: telescope on source 2009-Jan-13 18:20:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:20:14 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-13 18:20:14 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-13 18:20:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jan-13 18:20:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-13 18:20:14 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-13 18:20:14 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jan-13 18:20:14 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jan-13 18:20:14 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jan-13 18:20:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jan-13 18:20:14 START begin_task: Starting task 'selecting calibration type' 2009-Jan-13 18:20:14 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-13 18:20:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-13 18:20:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-13 18:20:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:20:14 START begin_task: Starting task 'waiting on setcal' 2009-Jan-13 18:20:14 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-13 18:20:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:20:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:20:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-13 18:20:15 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-13 18:20:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:20:15 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-13 18:20:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:20:15 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:20:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:20:15 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:20:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-13 18:20:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:20:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:20:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:20:15 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:20:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:20:15 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:20:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:20:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-13 18:20:15 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:20:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:20:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:20:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:20:15 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090113.a2010.0043.fits' is empty! 2009-Jan-13 18:20:15 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jan-13 18:20:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-13 18:20:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-13 18:20:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:20:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:20:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:20:15 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:20:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:20:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:20:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:20:15 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-13 18:20:15 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:20:15 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-13 18:20:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-13 18:20:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-13 18:20:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-13 18:20:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-13 18:20:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:20:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-13 18:20:15 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-13 18:20:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-13 18:20:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:20:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:20:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-13 18:20:19 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-13 18:20:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:20:19 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-13 18:20:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:20:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:20:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:20:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:20:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-13 18:20:19 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-13 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2009-Jan-13 18:20:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-13 18:20:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-Jan-13 18:20:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-13 18:20:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-13 18:20:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-13 18:20:19 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.882 1.104 ALFA beam 1: 0.924 0.887 2009-Jan-13 18:20:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.990 0.962 ALFA beam 3: 1.068 1.070 2009-Jan-13 18:20:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.886 0.886 ALFA beam 5: 1.014 0.963 2009-Jan-13 18:20:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.910 0.102 ALFA beam 7: 1.019 0.112 2009-Jan-13 18:20:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:20:19 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-13 18:20:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:20:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:20:19 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-13 18:20:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:20:19 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-13 18:20:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:20:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:20:19 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-13 18:20:19 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-13 18:20:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:20:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-13 18:20:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:20:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03768 J 2009-Jan-13 18:20:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:20:19 LOG2 antvel: Parameters to Doppler: Topocentric 80419 2009 13 0.0 2009-Jan-13 18:20:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:20:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-13 18:20:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-13 18:20:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:20:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:20:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:20:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-13 18:20:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:20:20 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-13 18:20:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:20:20 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.456612 2009.0376840761023 18.999933 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 0 1.449999999999256 11.923333333333323 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 1 1.448806327415154 12.028005436499496 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 2 1.444134417961071 11.958334404578835 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 3 1.445265759394995 11.853482440515029 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 4 1.451231548684801 11.818709452073403 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 5 1.455927617609741 11.889473029627659 2009-Jan-13 18:20:20 LOG4 log_alfabeam: ALFABEAM 6 1.454633868478010 11.993904051915242 2009-Jan-13 18:20:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300147 2009-Jan-13 18:20:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:20:20 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-13 18:20:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:20:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:20:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:20:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80421.00 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:20:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Jan-13 18:20:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 1.104 0.924 0.887 2009-Jan-13 18:20:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.987 1.143 1.118 2009-Jan-13 18:20:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.886 0.886 1.014 0.963 2009-Jan-13 18:20:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.102 1.019 0.112 2009-Jan-13 18:20:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.167 (still bad) 2009-Jan-13 18:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.144 (still bad) 2009-Jan-13 18:20:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.141 (still bad) 2009-Jan-13 18:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.147 (still bad) 2009-Jan-13 18:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:20:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:20:31 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-13 18:20:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:20:31 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-13 18:20:31 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-13 18:20:31 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:20:31 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-13 18:20:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:20:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03768 J 2009-Jan-13 18:20:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:20:31 LOG2 antvel: Parameters to Doppler: Topocentric 80431 2009 13 0.0 2009-Jan-13 18:20:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:20:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-13 18:20:31 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-13 18:20:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:20:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:20:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:20:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-13 18:20:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:20:31 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-13 18:20:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:20:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.459955 2009.0376844563593 18.999933 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000530 11.923333333333336 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 1 1.448859663155057 12.028133394247087 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 2 1.444152393776280 11.958976555809302 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 3 1.445230339503629 11.854003472688525 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 4 1.451178276818323 11.818577337601793 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 5 1.455910210950959 11.888824039176489 2009-Jan-13 18:20:31 LOG4 log_alfabeam: ALFABEAM 6 1.454669667550996 11.993394000525475 2009-Jan-13 18:20:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300148 2009-Jan-13 18:20:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:20:32 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-13 18:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:20:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.144 (still bad) 2009-Jan-13 18:20:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:20:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80433.00 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2009-Jan-13 18:20:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.147 (still bad) 2009-Jan-13 18:20:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.131 (still bad) 2009-Jan-13 18:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.129 (still bad) 2009-Jan-13 18:20:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Jan-13 18:20:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:20:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:20:43 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-13 18:20:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:20:43 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-13 18:20:43 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-13 18:20:43 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:20:43 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-13 18:20:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:20:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03768 J 2009-Jan-13 18:20:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:20:43 LOG2 antvel: Parameters to Doppler: Topocentric 80443 2009 13 0.0 2009-Jan-13 18:20:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:20:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-13 18:20:43 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-13 18:20:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:20:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:20:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:20:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-13 18:20:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:20:43 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-13 18:20:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:20:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.463297 2009.0376848366163 18.999933 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000446 11.923333333333336 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 1 1.448913041830982 12.028255455472957 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 2 1.444170687413411 11.959616450086644 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 3 1.445195201440466 11.854528157729959 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 4 1.451124957762419 11.818451111947438 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 5 1.455892479272219 11.888177179257355 2009-Jan-13 18:20:43 LOG4 log_alfabeam: ALFABEAM 6 1.454705195724965 11.992880206384427 2009-Jan-13 18:20:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300149 2009-Jan-13 18:20:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:20:44 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-13 18:20:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:20:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:20:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:20:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80445.00 2009-Jan-13 18:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:20:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.127 (still bad) 2009-Jan-13 18:20:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Jan-13 18:20:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.127 (still bad) 2009-Jan-13 18:20:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:20:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Jan-13 18:20:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Jan-13 18:20:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:20:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:20:55 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-13 18:20:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:20:55 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-13 18:20:55 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-13 18:20:55 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:20:55 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-13 18:20:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:20:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:20:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:20:55 LOG2 antvel: Parameters to Doppler: Topocentric 80455 2009 13 0.0 2009-Jan-13 18:20:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:20:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-13 18:20:55 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-13 18:20:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:20:55 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:20:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:20:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-13 18:20:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:20:55 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-13 18:20:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:20:55 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.466640 2009.0376852168733 18.999933 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000269 11.923333333333336 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 1 1.448966486176707 12.028371674792018 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 2 1.444189306498178 11.960254361533663 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 3 1.445160330093137 11.855056716870271 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 4 1.451071568816657 11.818330719447394 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 5 1.455874415092919 11.887532174036620 2009-Jan-13 18:20:55 LOG4 log_alfabeam: ALFABEAM 6 1.454740468211396 11.992362451043062 2009-Jan-13 18:20:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300150 2009-Jan-13 18:20:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:20:56 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-13 18:20:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:20:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:20:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:20:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:20:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80457.00 2009-Jan-13 18:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:20:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Jan-13 18:20:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Jan-13 18:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Jan-13 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Jan-13 18:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:21:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:21:07 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-13 18:21:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:21:07 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-13 18:21:07 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-13 18:21:07 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:21:07 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-13 18:21:07 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:21:07 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:21:07 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:21:07 LOG2 antvel: Parameters to Doppler: Topocentric 80467 2009 13 0.0 2009-Jan-13 18:21:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:21:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-13 18:21:07 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-13 18:21:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:21:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:21:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:21:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-13 18:21:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:21:07 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-13 18:21:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:21:07 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.469982 2009.0376855971303 18.999933 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000129 11.923333333333336 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 1 1.449019954980227 12.028481967322502 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 2 1.444208236406580 11.960889800937137 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 3 1.445125752086673 11.855588739286274 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 4 1.451018151143552 11.818216248927879 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 5 1.455856032517884 11.886889519513366 2009-Jan-13 18:21:07 LOG4 log_alfabeam: ALFABEAM 6 1.454775457995555 11.991841135191970 2009-Jan-13 18:21:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300151 2009-Jan-13 18:21:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:21:08 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-13 18:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Jan-13 18:21:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:21:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:21:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:21:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:21:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80469.00 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Jan-13 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:21:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:21:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:21:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Jan-13 18:21:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:21:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:21:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:21:19 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-13 18:21:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:21:19 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-13 18:21:19 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-13 18:21:19 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:21:19 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-13 18:21:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:21:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:21:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:21:19 LOG2 antvel: Parameters to Doppler: Topocentric 80479 2009 13 0.0 2009-Jan-13 18:21:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:21:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-13 18:21:19 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-13 18:21:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:21:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:21:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:21:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-13 18:21:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:21:19 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-13 18:21:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:21:19 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.473325 2009.0376859773876 18.999933 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000091 11.923333333333337 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 1 1.449073470984490 12.028586386793494 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 2 1.444227484819590 11.961523042248613 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 3 1.445091452341535 11.856124446926220 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 4 1.450964682016568 11.818107645610104 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 5 1.455837324013470 11.886248940042929 2009-Jan-13 18:21:19 LOG4 log_alfabeam: ALFABEAM 6 1.454810180251329 11.991316039688538 2009-Jan-13 18:21:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300152 2009-Jan-13 18:21:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:21:20 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-13 18:21:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:21:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:21:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:21:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:21:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80481.00 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:21:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Jan-13 18:21:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.110 1.020 1.001 2009-Jan-13 18:21:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.961 1.076 1.088 2009-Jan-13 18:21:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.905 1.022 0.961 2009-Jan-13 18:21:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.105 1.032 0.115 2009-Jan-13 18:21:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Jan-13 18:21:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Jan-13 18:21:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Jan-13 18:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:21:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:21:31 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-13 18:21:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:21:31 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-13 18:21:31 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-13 18:21:31 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:21:31 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-13 18:21:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:21:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:21:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:21:31 LOG2 antvel: Parameters to Doppler: Topocentric 80491 2009 13 0.0 2009-Jan-13 18:21:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:21:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-13 18:21:31 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-13 18:21:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:21:31 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:21:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:21:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-13 18:21:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:21:31 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-13 18:21:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:21:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.476667 2009.0376863576446 18.999933 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000074 11.923333333333336 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 1 1.449126992917246 12.028684861551453 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 2 1.444247036417332 11.962153601721822 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 3 1.445057456829988 11.856663421188529 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 4 1.450911202670093 11.818004985101547 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 5 1.455818304400250 11.885610926464103 2009-Jan-13 18:21:31 LOG4 log_alfabeam: ALFABEAM 6 1.454844608592113 11.990787573258240 2009-Jan-13 18:21:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300153 2009-Jan-13 18:21:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:21:32 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-13 18:21:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:21:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:21:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:21:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80493.00 2009-Jan-13 18:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:21:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Jan-13 18:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Jan-13 18:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Jan-13 18:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:21:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:21:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:21:43 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-13 18:21:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:21:43 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-13 18:21:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-13 18:21:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-13 18:21:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-13 18:21:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:21:43 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-13 18:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:21:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-13 18:21:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:21:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:21:43 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-13 18:21:43 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-13 18:21:43 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:21:43 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-13 18:21:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:21:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:21:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:21:43 LOG2 antvel: Parameters to Doppler: Topocentric 80503 2009 13 0.0 2009-Jan-13 18:21:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:21:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-13 18:21:43 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-13 18:21:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:21:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:21:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:21:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-13 18:21:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:21:43 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-13 18:21:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:21:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.480010 2009.0376867379016 18.999933 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000092 11.923333333333339 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 1 1.449180543553229 12.028777444429940 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 2 1.444266898941122 11.962781753237417 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 3 1.445023750500495 11.857205884854368 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 4 1.450857690348522 11.817908213514459 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 5 1.455798966084990 11.884975203214578 2009-Jan-13 18:21:43 LOG4 log_alfabeam: ALFABEAM 6 1.454878758161485 11.990255515956790 2009-Jan-13 18:21:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300154 2009-Jan-13 18:21:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:21:44 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-13 18:21:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:21:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:21:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:21:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80505.00 2009-Jan-13 18:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Jan-13 18:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.611 (still bad) 2009-Jan-13 18:21:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.586 (still bad) 2009-Jan-13 18:21:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.582 (still bad) 2009-Jan-13 18:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Jan-13 18:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:21:55 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-13 18:21:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:21:55 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-13 18:21:55 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-13 18:21:55 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:21:55 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-13 18:21:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:21:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:21:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:21:55 LOG2 antvel: Parameters to Doppler: Topocentric 80515 2009 13 0.0 2009-Jan-13 18:21:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:21:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-13 18:21:55 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-13 18:21:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:21:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:21:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:21:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-13 18:21:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:21:55 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-13 18:21:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:21:55 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.483352 2009.0376871181586 18.999933 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000052 11.923333333333337 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 1 1.449234081613672 12.028864077027301 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 2 1.444287056400163 11.963407019113069 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 3 1.444990358642820 11.857751412133773 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 4 1.450804186302983 11.817817393203741 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 5 1.455779324580750 11.884342255356449 2009-Jan-13 18:21:55 LOG4 log_alfabeam: ALFABEAM 6 1.454912603230503 11.989720283978601 2009-Jan-13 18:21:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300155 2009-Jan-13 18:21:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:21:56 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-13 18:21:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:21:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:21:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:21:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:21:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80517.00 2009-Jan-13 18:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:21:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.558 (still bad) 2009-Jan-13 18:22:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Jan-13 18:22:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.560 (still bad) 2009-Jan-13 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.557 (still bad) 2009-Jan-13 18:22:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:22:07 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-13 18:22:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:22:07 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-13 18:22:07 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-13 18:22:07 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:22:07 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-13 18:22:07 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:22:07 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:22:07 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:22:07 LOG2 antvel: Parameters to Doppler: Topocentric 80527 2009 13 0.0 2009-Jan-13 18:22:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:22:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-13 18:22:07 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-13 18:22:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:22:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:22:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:22:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-13 18:22:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:22:07 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-13 18:22:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:22:07 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.486695 2009.0376874984156 18.999933 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000062 11.923333333333336 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 1 1.449287629913044 12.028944811250806 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 2 1.444307516601948 11.964029673247671 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 3 1.444957266229987 11.858300226765635 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 4 1.450750667738582 11.817732471199914 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 5 1.455759372230352 11.883711807313393 2009-Jan-13 18:22:07 LOG4 log_alfabeam: ALFABEAM 6 1.454946158916554 11.989181656459182 2009-Jan-13 18:22:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300156 2009-Jan-13 18:22:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:22:08 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-13 18:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.559 (still bad) 2009-Jan-13 18:22:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:22:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:22:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:22:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80529.00 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.548 (still bad) 2009-Jan-13 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.569 (still bad) 2009-Jan-13 18:22:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.552 (still bad) 2009-Jan-13 18:22:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.547 (still bad) 2009-Jan-13 18:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.551 (still bad) 2009-Jan-13 18:22:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:22:19 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-13 18:22:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:22:19 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-13 18:22:19 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-13 18:22:19 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:22:19 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-13 18:22:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:22:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:22:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:22:19 LOG2 antvel: Parameters to Doppler: Topocentric 80539 2009 13 0.0 2009-Jan-13 18:22:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:22:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-13 18:22:19 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-13 18:22:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:22:19 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:22:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:22:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-13 18:22:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:22:19 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-13 18:22:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:22:19 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.490037 2009.0376878786728 18.999933 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000052 11.923333333333339 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 1 1.449341147220701 12.029019601924654 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 2 1.444328262910403 11.964649244593504 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 3 1.444924497841321 11.858851896385101 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 4 1.450697175869923 11.817653496621718 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 5 1.455739125214159 11.883084337779474 2009-Jan-13 18:22:19 LOG4 log_alfabeam: ALFABEAM 6 1.454979400176658 11.988640056470965 2009-Jan-13 18:22:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300157 2009-Jan-13 18:22:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:22:20 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-13 18:22:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:22:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:22:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.551 (still bad) 2009-Jan-13 18:22:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:22:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80541.00 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.532 (still bad) 2009-Jan-13 18:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.550 (still bad) 2009-Jan-13 18:22:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Jan-13 18:22:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.271 1.518 1.266 1.198 2009-Jan-13 18:22:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.386 1.339 1.534 1.512 2009-Jan-13 18:22:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.272 1.277 1.454 1.294 2009-Jan-13 18:22:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.323 0.105 1.465 0.115 2009-Jan-13 18:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.532 (still bad) 2009-Jan-13 18:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.533 (still bad) 2009-Jan-13 18:22:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:22:31 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-13 18:22:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:22:31 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-13 18:22:31 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-13 18:22:31 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:22:31 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-13 18:22:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:22:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:22:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:22:31 LOG2 antvel: Parameters to Doppler: Topocentric 80551 2009 13 0.0 2009-Jan-13 18:22:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:22:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-13 18:22:31 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-13 18:22:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:22:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:22:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:22:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-13 18:22:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:22:31 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-13 18:22:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:22:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.493379 2009.0376882589298 18.999933 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000107 11.923333333333339 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 1 1.449394640398637 12.029088480253137 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 2 1.444349296870035 11.965265823107472 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 3 1.444892048134103 11.859406479452014 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 4 1.450643703849539 11.817580438441594 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 5 1.455718581995344 11.882459757526677 2009-Jan-13 18:22:31 LOG4 log_alfabeam: ALFABEAM 6 1.455012332297861 11.988095425511904 2009-Jan-13 18:22:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300158 2009-Jan-13 18:22:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:22:32 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-13 18:22:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:22:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:22:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.532 (still bad) 2009-Jan-13 18:22:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80553.00 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.523 (still bad) 2009-Jan-13 18:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.515 (still bad) 2009-Jan-13 18:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.504 (still bad) 2009-Jan-13 18:22:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.505 (still bad) 2009-Jan-13 18:22:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.503 (still bad) 2009-Jan-13 18:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:43 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:22:43 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-13 18:22:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:22:43 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-13 18:22:43 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-13 18:22:43 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:22:43 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-13 18:22:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:22:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:22:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:22:43 LOG2 antvel: Parameters to Doppler: Topocentric 80563 2009 13 0.0 2009-Jan-13 18:22:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:22:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-13 18:22:43 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-13 18:22:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:22:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:22:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:22:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-13 18:22:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:22:43 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-13 18:22:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:22:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.496722 2009.0376886391869 18.999933 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000002 11.923333333333336 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 1 1.449448116322099 12.029151473388380 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 2 1.444370620236731 11.965879497026704 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 3 1.444859911967491 11.859964036766025 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 4 1.450590244813614 11.817513269679999 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 5 1.455697740821105 11.881837978980306 2009-Jan-13 18:22:43 LOG4 log_alfabeam: ALFABEAM 6 1.455044960370995 11.987547702693517 2009-Jan-13 18:22:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300159 2009-Jan-13 18:22:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:22:44 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-13 18:22:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:22:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:22:44 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:22:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80565.00 2009-Jan-13 18:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.502 (still bad) 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:22:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.497 (still bad) 2009-Jan-13 18:22:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.509 (still bad) 2009-Jan-13 18:22:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.501 (still bad) 2009-Jan-13 18:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.497 (still bad) 2009-Jan-13 18:22:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:22:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.500 (still bad) 2009-Jan-13 18:22:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:22:55 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-13 18:22:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:22:55 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-13 18:22:55 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-13 18:22:55 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:22:55 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-13 18:22:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:22:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:22:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:22:55 LOG2 antvel: Parameters to Doppler: Topocentric 80575 2009 13 0.0 2009-Jan-13 18:22:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:22:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-13 18:22:55 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-13 18:22:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:22:55 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:22:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:22:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-13 18:22:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:22:55 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-13 18:22:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:22:55 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.500064 2009.0376890194439 18.999933 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000031 11.923333333333332 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 1 1.449501533931624 12.029208555835261 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 2 1.444392215460461 11.966489806258597 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 3 1.444828112809779 11.860524127291344 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 4 1.450536839822848 11.817452019740589 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 5 1.455676618821140 11.881219470237522 2009-Jan-13 18:22:55 LOG4 log_alfabeam: ALFABEAM 6 1.455077260430378 11.986997320251531 2009-Jan-13 18:22:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300160 2009-Jan-13 18:22:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:22:56 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-13 18:22:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:22:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:22:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:22:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:22:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80577.00 2009-Jan-13 18:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.501 (still bad) 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.495 (still bad) 2009-Jan-13 18:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.505 (still bad) 2009-Jan-13 18:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.498 (still bad) 2009-Jan-13 18:23:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.501 (still bad) 2009-Jan-13 18:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:23:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:23:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:23:07 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-13 18:23:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:23:07 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-13 18:23:07 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jan-13 18:23:07 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-13 18:23:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-13 18:23:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:23:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:23:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:23:07 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-13 18:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.496 (still bad) 2009-Jan-13 18:23:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:23:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:23:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:23:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:23:07 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-13 18:23:07 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-13 18:23:07 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-13 18:23:07 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:23:07 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-13 18:23:07 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:23:07 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:23:07 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:23:07 LOG2 antvel: Parameters to Doppler: Topocentric 80587 2009 13 0.0 2009-Jan-13 18:23:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:23:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-13 18:23:07 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-13 18:23:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:23:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:23:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:23:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-13 18:23:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:23:07 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-13 18:23:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:23:07 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.503407 2009.0376893997009 18.999933 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000031 11.923333333333341 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 1 1.449554916181242 12.029259776920838 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 2 1.444414090546609 11.967097025049398 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 3 1.444796635689528 11.861086977749281 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 4 1.450483465944044 11.817396638201162 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 5 1.455655208147283 11.880603955351985 2009-Jan-13 18:23:07 LOG4 log_alfabeam: ALFABEAM 6 1.455109247538059 11.986444054456417 2009-Jan-13 18:23:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300161 2009-Jan-13 18:23:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:23:08 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-13 18:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:23:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:23:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-13 18:23:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80589.00 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.489 (still bad) 2009-Jan-13 18:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2009-Jan-13 18:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.153 (still bad) 2009-Jan-13 18:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Jan-13 18:23:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Jan-13 18:23:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:23:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:23:19 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-13 18:23:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:23:19 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-13 18:23:19 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-13 18:23:19 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:23:19 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-13 18:23:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:23:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:23:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:23:19 LOG2 antvel: Parameters to Doppler: Topocentric 80599 2009 13 0.0 2009-Jan-13 18:23:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:23:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-13 18:23:19 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-13 18:23:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:23:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:23:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:23:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-13 18:23:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:23:19 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-13 18:23:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:23:19 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.506749 2009.0376897799581 18.999933 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000049 11.923333333333337 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 1 1.449608222189382 12.029305124097030 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 2 1.444436227373968 11.967700701231156 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 3 1.444765503308360 11.861652142137954 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 4 1.450430164069687 11.817347141483669 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 5 1.455633526523668 11.879991894706247 2009-Jan-13 18:23:19 LOG4 log_alfabeam: ALFABEAM 6 1.455140898473386 11.985888342861129 2009-Jan-13 18:23:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300162 2009-Jan-13 18:23:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:23:20 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-13 18:23:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:23:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:23:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-13 18:23:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80601.00 2009-Jan-13 18:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Jan-13 18:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.130 (still bad) 2009-Jan-13 18:23:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Jan-13 18:23:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.120 0.967 0.914 2009-Jan-13 18:23:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.974 1.122 1.105 2009-Jan-13 18:23:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.912 1.060 0.979 2009-Jan-13 18:23:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.105 1.044 0.115 2009-Jan-13 18:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Jan-13 18:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-13 18:23:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:23:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:23:31 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-13 18:23:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:23:31 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-13 18:23:31 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-13 18:23:31 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:23:31 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-13 18:23:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:23:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:23:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:23:31 LOG2 antvel: Parameters to Doppler: Topocentric 80611 2009 13 0.0 2009-Jan-13 18:23:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:23:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-13 18:23:31 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-13 18:23:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:23:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:23:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:23:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-13 18:23:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:23:31 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-13 18:23:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:23:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.510092 2009.0376901602151 18.999933 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000044 11.923333333333339 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 1 1.449661474980559 12.029344645503453 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 2 1.444458634041472 11.968301109269326 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 3 1.444734700717546 11.862219848615107 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 4 1.450376911196872 11.817303480335260 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 5 1.455611566011484 11.879383012111433 2009-Jan-13 18:23:31 LOG4 log_alfabeam: ALFABEAM 6 1.455172228276986 11.985329960353212 2009-Jan-13 18:23:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300163 2009-Jan-13 18:23:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:23:32 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-13 18:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:23:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:23:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-13 18:23:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80613.00 2009-Jan-13 18:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:23:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:23:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-13 18:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.122 (still bad) 2009-Jan-13 18:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:23:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Jan-13 18:23:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:23:43 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-13 18:23:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:23:43 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-13 18:23:43 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-13 18:23:43 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:23:43 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-13 18:23:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:23:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:23:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:23:43 LOG2 antvel: Parameters to Doppler: Topocentric 80623 2009 13 0.0 2009-Jan-13 18:23:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:23:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-13 18:23:43 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-13 18:23:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:23:43 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:23:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:23:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-13 18:23:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:23:43 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-13 18:23:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:23:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.513434 2009.0376905404721 18.999933 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000033 11.923333333333330 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 1 1.449714633901877 12.029378341346163 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 2 1.444481291890013 11.968897805375217 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 3 1.444704249835591 11.862789646875356 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 4 1.450323748000324 11.817265658379762 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 5 1.455589344897813 11.878777759756963 2009-Jan-13 18:23:43 LOG4 log_alfabeam: ALFABEAM 6 1.455203214492280 11.984769349155863 2009-Jan-13 18:23:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300164 2009-Jan-13 18:23:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:23:44 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-13 18:23:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:23:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:23:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-13 18:23:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80625.00 2009-Jan-13 18:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.121 (still bad) 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:23:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:23:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:23:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:23:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:23:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:23:55 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-13 18:23:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:23:55 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-13 18:23:55 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-13 18:23:55 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:23:55 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-13 18:23:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:23:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:23:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:23:55 LOG2 antvel: Parameters to Doppler: Topocentric 80635 2009 13 0.0 2009-Jan-13 18:23:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:23:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-13 18:23:55 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-13 18:23:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:23:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:23:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:23:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-13 18:23:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:23:55 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-13 18:23:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:23:55 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.516777 2009.0376909207291 18.999933 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000028 11.923333333333336 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 1 1.449767722054924 12.029406258462958 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 2 1.444504209121135 11.969491064254100 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 3 1.444674135738985 11.863361766651984 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 4 1.450270651400474 11.817233627645804 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 5 1.455566855144278 11.878175861182628 2009-Jan-13 18:23:55 LOG4 log_alfabeam: ALFABEAM 6 1.455233872136460 11.984206282637054 2009-Jan-13 18:23:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300165 2009-Jan-13 18:23:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:23:56 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-13 18:23:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:23:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:23:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:23:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-13 18:23:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80637.00 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Jan-13 18:24:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Jan-13 18:24:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Jan-13 18:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Jan-13 18:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:24:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:24:07 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-13 18:24:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:24:07 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-13 18:24:07 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-13 18:24:07 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:24:07 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-13 18:24:07 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:24:07 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:24:07 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:24:07 LOG2 antvel: Parameters to Doppler: Topocentric 80647 2009 13 0.0 2009-Jan-13 18:24:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:24:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-13 18:24:07 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-13 18:24:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:24:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:24:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:24:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-13 18:24:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:24:07 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-13 18:24:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:24:07 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.520119 2009.0376913009864 18.999933 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000047 11.923333333333336 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 1 1.449820699063689 12.029428409577706 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 2 1.444527366571872 11.970080450913105 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 3 1.444644379549052 11.863935754003249 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 4 1.450217661805122 11.817207379186497 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 5 1.455544115566991 11.877577759943833 2009-Jan-13 18:24:07 LOG4 log_alfabeam: ALFABEAM 6 1.455264179532342 11.983641207036678 2009-Jan-13 18:24:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300166 2009-Jan-13 18:24:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:24:08 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-13 18:24:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:24:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:24:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Jan-13 18:24:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-13 18:24:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80649.00 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Jan-13 18:24:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Jan-13 18:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Jan-13 18:24:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Jan-13 18:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:24:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:24:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:24:19 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-13 18:24:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:24:19 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-13 18:24:19 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-13 18:24:19 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:24:19 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-13 18:24:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:24:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:24:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:24:19 LOG2 antvel: Parameters to Doppler: Topocentric 80659 2009 13 0.0 2009-Jan-13 18:24:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:24:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-13 18:24:19 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-13 18:24:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:24:19 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:24:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:24:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-13 18:24:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:24:19 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-13 18:24:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:24:19 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.523462 2009.0376916812434 18.999933 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000036 11.923333333333336 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 1 1.449873588112788 12.029444840096943 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 2 1.444550772555486 11.970666240299957 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 3 1.444614966370929 11.864511840373776 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 4 1.450164756052037 11.817186866439286 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 5 1.455521118018659 11.876983179298017 2009-Jan-13 18:24:19 LOG4 log_alfabeam: ALFABEAM 6 1.455294151670805 11.983073894068383 2009-Jan-13 18:24:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300167 2009-Jan-13 18:24:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:24:20 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-13 18:24:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:24:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:24:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-13 18:24:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80661.00 2009-Jan-13 18:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Jan-13 18:24:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Jan-13 18:24:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:24:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 1.092 0.903 0.858 2009-Jan-13 18:24:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.954 1.065 1.077 2009-Jan-13 18:24:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.892 0.990 0.945 2009-Jan-13 18:24:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.104 1.024 0.114 2009-Jan-13 18:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Jan-13 18:24:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:24:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:24:31 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-13 18:24:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:24:31 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-13 18:24:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-13 18:24:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-13 18:24:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-13 18:24:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:24:31 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-13 18:24:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:24:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-13 18:24:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:24:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:24:31 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-13 18:24:31 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-13 18:24:31 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:24:31 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-13 18:24:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:24:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:24:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:24:31 LOG2 antvel: Parameters to Doppler: Topocentric 80671 2009 13 0.0 2009-Jan-13 18:24:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:24:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-13 18:24:31 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-13 18:24:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:24:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:24:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:24:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-13 18:24:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:24:31 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-13 18:24:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:24:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.526804 2009.0376920615004 18.999933 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000026 11.923333333333332 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 1 1.449926349149942 12.029455574985217 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 2 1.444574407440836 11.971248006594376 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 3 1.444585916518434 11.865089568853154 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 4 1.450111974235542 11.817172068155427 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 5 1.455497881809322 11.876392553765367 2009-Jan-13 18:24:31 LOG4 log_alfabeam: ALFABEAM 6 1.455323767666461 11.982504793332579 2009-Jan-13 18:24:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300168 2009-Jan-13 18:24:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:24:32 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-13 18:24:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:24:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-13 18:24:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-13 18:24:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80673.00 2009-Jan-13 18:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.574 (still bad) 2009-Jan-13 18:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.578 (still bad) 2009-Jan-13 18:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.578 (still bad) 2009-Jan-13 18:24:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.574 (still bad) 2009-Jan-13 18:24:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:24:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:24:43 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-13 18:24:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:24:43 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-13 18:24:43 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-13 18:24:43 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:24:43 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-13 18:24:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:24:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:24:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:24:43 LOG2 antvel: Parameters to Doppler: Topocentric 80683 2009 13 0.0 2009-Jan-13 18:24:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:24:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-13 18:24:43 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-13 18:24:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:24:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:24:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:24:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-13 18:24:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:24:43 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-13 18:24:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:24:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.530147 2009.0376924417574 18.999933 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000020 11.923333333333332 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 1 1.449979005447296 12.029460658074916 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 2 1.444598279662243 11.971826024971003 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 3 1.444557215130260 11.865669172727609 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 4 1.450059293105616 11.817162939322062 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 5 1.455474398673343 11.875805606328379 2009-Jan-13 18:24:43 LOG4 log_alfabeam: ALFABEAM 6 1.455353042479316 11.981933674758411 2009-Jan-13 18:24:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300169 2009-Jan-13 18:24:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:24:44 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-13 18:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.576 (still bad) 2009-Jan-13 18:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:24:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-13 18:24:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-13 18:24:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80685.00 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Jan-13 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:24:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.549 (still bad) 2009-Jan-13 18:24:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.577 (still bad) 2009-Jan-13 18:24:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.551 (still bad) 2009-Jan-13 18:24:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.550 (still bad) 2009-Jan-13 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:24:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:24:55 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-13 18:24:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:24:55 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-13 18:24:55 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-13 18:24:55 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:24:55 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-13 18:24:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:24:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:24:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:24:55 LOG2 antvel: Parameters to Doppler: Topocentric 80695 2009 13 0.0 2009-Jan-13 18:24:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:24:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-13 18:24:55 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-13 18:24:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:24:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:24:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:24:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-13 18:24:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:24:55 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-13 18:24:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:24:55 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.533489 2009.0376928220144 18.999933 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000026 11.923333333333339 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 1 1.450031517320782 12.029460126256216 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 2 1.444622369156656 11.972399879118075 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 3 1.444528881705350 11.866250192782108 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 4 1.450006752398342 11.817159446696067 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 5 1.455450688378512 11.875222762111566 2009-Jan-13 18:24:55 LOG4 log_alfabeam: ALFABEAM 6 1.455381956025143 11.981360990652256 2009-Jan-13 18:24:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300170 2009-Jan-13 18:24:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:24:56 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-13 18:24:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:24:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-13 18:24:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.552 (still bad) 2009-Jan-13 18:24:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-13 18:24:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80697.00 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.552 (still bad) 2009-Jan-13 18:24:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:24:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.544 (still bad) 2009-Jan-13 18:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.569 (still bad) 2009-Jan-13 18:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.542 (still bad) 2009-Jan-13 18:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.544 (still bad) 2009-Jan-13 18:25:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:25:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:25:07 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-13 18:25:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:25:07 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-13 18:25:07 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-13 18:25:07 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:25:07 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-13 18:25:07 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:25:07 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:25:07 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:25:07 LOG2 antvel: Parameters to Doppler: Topocentric 80707 2009 13 0.0 2009-Jan-13 18:25:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:25:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-13 18:25:07 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-13 18:25:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:25:07 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:25:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:25:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-13 18:25:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:25:07 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-13 18:25:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:25:07 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.536831 2009.0376932022716 18.999933 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000005 11.923333333333336 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 1 1.450083892483192 12.029454024288178 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 2 1.444646677183295 11.972969674521826 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 3 1.444500909737565 11.866832689761370 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 4 1.449954344433277 11.817161545506227 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 5 1.455426749727870 11.874643916446518 2009-Jan-13 18:25:07 LOG4 log_alfabeam: ALFABEAM 6 1.455410514735620 11.980786681113015 2009-Jan-13 18:25:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300171 2009-Jan-13 18:25:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:25:08 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-13 18:25:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:25:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-13 18:25:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-13 18:25:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80709.00 2009-Jan-13 18:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.547 (still bad) 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.527 (still bad) 2009-Jan-13 18:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.528 (still bad) 2009-Jan-13 18:25:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.529 (still bad) 2009-Jan-13 18:25:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.526 (still bad) 2009-Jan-13 18:25:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.527 (still bad) 2009-Jan-13 18:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:25:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:25:19 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-13 18:25:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:25:19 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-13 18:25:19 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-13 18:25:19 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:25:19 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-13 18:25:19 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:25:19 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:25:19 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:25:19 LOG2 antvel: Parameters to Doppler: Topocentric 80719 2009 13 0.0 2009-Jan-13 18:25:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:25:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-13 18:25:19 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-13 18:25:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:25:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:25:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:25:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-13 18:25:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:25:19 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-13 18:25:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:25:19 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.540174 2009.0376935825286 18.999933 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000011 11.923333333333339 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 1 1.450136138612240 12.029442392671317 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 2 1.444671205201064 11.973535514317312 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 3 1.444473292959889 11.867416726319362 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 4 1.449902061562875 11.817169195239311 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 5 1.455402581320422 11.874068966949283 2009-Jan-13 18:25:19 LOG4 log_alfabeam: ALFABEAM 6 1.455438724809864 11.980210684268922 2009-Jan-13 18:25:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300172 2009-Jan-13 18:25:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:25:20 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-13 18:25:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:25:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-13 18:25:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-13 18:25:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80721.00 2009-Jan-13 18:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.528 (still bad) 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:25:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.499 (still bad) 2009-Jan-13 18:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.515 (still bad) 2009-Jan-13 18:25:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.500 (still bad) 2009-Jan-13 18:25:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.500 (still bad) 2009-Jan-13 18:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:25:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.251 1.499 1.370 1.286 2009-Jan-13 18:25:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.324 1.496 1.492 2009-Jan-13 18:25:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.252 1.255 1.410 1.277 2009-Jan-13 18:25:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.305 0.104 1.447 0.115 2009-Jan-13 18:25:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:25:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:25:31 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-13 18:25:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:25:31 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-13 18:25:31 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-13 18:25:31 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:25:31 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-13 18:25:31 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:25:31 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:25:31 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:25:31 LOG2 antvel: Parameters to Doppler: Topocentric 80731 2009 13 0.0 2009-Jan-13 18:25:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:25:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-13 18:25:31 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-13 18:25:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:25:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:25:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:25:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-13 18:25:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:25:31 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-13 18:25:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:25:31 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.543516 2009.0376939627856 18.999933 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000030 11.923333333333332 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 1 1.450188216653673 12.029425285516961 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 2 1.444695932568406 11.974096996993637 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 3 1.444446049641382 11.868001841011429 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 4 1.449849942906814 11.817182345314290 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 5 1.455378203540977 11.873498324067160 2009-Jan-13 18:25:31 LOG4 log_alfabeam: ALFABEAM 6 1.455466567375178 11.979633455270537 2009-Jan-13 18:25:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300173 2009-Jan-13 18:25:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:25:32 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-13 18:25:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-13 18:25:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:25:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-13 18:25:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80733.00 2009-Jan-13 18:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.496 (still bad) 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:25:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.487 (still bad) 2009-Jan-13 18:25:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.511 (still bad) 2009-Jan-13 18:25:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.487 (still bad) 2009-Jan-13 18:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.486 (still bad) 2009-Jan-13 18:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:25:43 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-13 18:25:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:25:43 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-13 18:25:43 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-13 18:25:43 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:25:43 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-13 18:25:43 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:25:43 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:25:43 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:25:43 LOG2 antvel: Parameters to Doppler: Topocentric 80743 2009 13 0.0 2009-Jan-13 18:25:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:25:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-13 18:25:43 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-13 18:25:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:25:43 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:25:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:25:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-13 18:25:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-13 18:25:43 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-13 18:25:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:25:43 LOG5 log_alfabeam: Parameters: 1.45 11.923333333333332 1.546859 2009.0376943430426 18.999933 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 0 1.450000000000010 11.923333333333336 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 1 1.450240150111753 12.029402742028065 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 2 1.444720868063424 11.974654398104175 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 3 1.444419165034280 11.868588272243310 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 4 1.449797964982584 11.817200955280381 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 5 1.455353607786599 11.872931710249933 2009-Jan-13 18:25:43 LOG4 log_alfabeam: ALFABEAM 6 1.455494057288351 11.979054759062828 2009-Jan-13 18:25:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901300174 2009-Jan-13 18:25:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-13 18:25:44 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-13 18:25:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:25:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-13 18:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.489 (still bad) 2009-Jan-13 18:25:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-13 18:25:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80745.00 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.490 (still bad) 2009-Jan-13 18:25:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.486 (still bad) 2009-Jan-13 18:25:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.487 (still bad) 2009-Jan-13 18:25:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.484 (still bad) 2009-Jan-13 18:25:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.483 (still bad) 2009-Jan-13 18:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:25:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:25:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-13 18:25:55 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-13 18:25:55 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 INFO2 smartfreq: Switching off CAL 2009-Jan-13 18:25:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:25:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:25:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:25:55 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:25:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:25:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:25:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:25:55 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 INFO3 restore_frequencies: Restoring original frequencies 2009-Jan-13 18:25:55 LOG5 antvel: Calling 'antvel 12700.000000 115524.000000 J Topocentric 0' 2009-Jan-13 18:25:55 LOG2 antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03769 J 2009-Jan-13 18:25:55 LOG2 antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:25:55 LOG2 antvel: Parameters to Doppler: Topocentric 80755 2009 13 0.0 2009-Jan-13 18:25:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:25:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-13 18:25:55 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-13 18:25:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:25:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:25:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:25:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:55 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jan-13 18:25:55 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jan-13 18:25:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:25:55 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jan-13 18:25:55 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-13 18:25:55 NOTE run_command_file: DONE with command file processing 2009-Jan-13 18:25:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jan-13 18:25:56 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-13 18:25:56 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-13 18:25:56 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Jan-13 18:25:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:25:56 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Jan-13 18:25:56 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-13 18:25:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:25:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.486 (still bad) 2009-Jan-13 18:26:09 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-13 18:26:09 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-13 18:26:09 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-13 18:26:09 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-13 18:26:09 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-13 18:26:09 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-13 18:26:09 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-13 18:26:09 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-13 18:26:09 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-13 18:26:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-13 18:26:09 LOG3 exec_msg: Closing socket 2009-Jan-13 18:26:09 LOG3 exec_msg: Closing socket 2009-Jan-13 18:26:09 LOG3 exec_msg: Closing socket 2009-Jan-13 18:26:09 LOG3 exec_msg: Closing socket 2009-Jan-13 18:26:11 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-13 18:26:11 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-13 18:26:11 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-13 18:26:12 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-13 18:26:20 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Jan-13 18:26:20 LOG2 CIMA-antvel: Precessing RA = 01:27:00.0 Dec = +11:55:24.0 Epoch = 2009.03770 J 2009-Jan-13 18:26:20 LOG2 CIMA-antvel: Computed apparent RA = 01:27:29.5 Dec = +11:58:20.5 2009-Jan-13 18:26:20 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80780 2009 13 0.0 2009-Jan-13 18:26:20 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-13 18:26:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-13 18:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-13 18:26:22 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jan-13 18:26:22 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jan-13 18:26:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-13 18:26:22 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-13 18:26:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-13 18:26:22 LOG1 config_iflo: Receiver ALFA already selected 2009-Jan-13 18:26:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:26:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:26:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:26:22 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:26:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:26:22 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:26:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:26:22 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jan-13 18:26:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jan-13 18:26:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-13 18:26:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jan-13 18:26:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jan-13 18:26:22 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jan-13 18:26:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-13 18:26:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:26:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-13 18:26:22 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jan-13 18:26:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-13 18:26:22 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-13 18:26:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-13 18:26:22 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-13 18:26:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:26:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-13 18:26:22 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-13 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-13 18:26:23 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jan-13 18:26:23 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jan-13 18:26:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-13 18:26:23 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-13 18:26:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-13 18:26:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-13 18:26:23 START begin_task: Starting task 'selecting calibration port' 2009-Jan-13 18:26:23 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-13 18:26:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-13 18:26:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:26:23 START begin_task: Starting task 'waiting on calport' 2009-Jan-13 18:26:23 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Jan-13 18:26:23 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-13 18:26:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:26:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-13 18:26:23 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-13 18:26:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-13 18:26:23 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:26:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:26:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:26:23 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:26:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:26:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:26:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:26:23 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-13 18:26:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-13 18:26:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:26:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:26:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-13 18:26:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-13 18:26:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:26:24 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-13 18:26:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:26:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-13 18:26:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:26:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:26:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:26:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:26:24 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jan-13 18:26:24 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-13 18:26:24 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-13 18:26:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:26:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-13 18:26:24 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-13 18:26:24 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Jan-13 18:26:24 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Jan-13 18:26:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:26:24 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-13 18:26:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-13 18:26:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-13 18:26:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:26:24 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-13 18:26:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-13 18:26:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:26:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-13 18:26:24 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-13 18:26:25 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Jan-13 18:26:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-13 18:26:25 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-13 18:26:38 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-13 18:26:38 LOG4 exec_msg: From OBSERVER: track_new_source drift49p2 013400.0 +115524 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-13 18:26:38 LOG1 track_new_source: Calling 'track_new_source drift49p2 013400.0 +115524 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-13 18:26:38 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-13 18:26:38 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift49p2} INFO {Selecting source 'drift49p2' ...} 2009-Jan-13 18:26:38 LOG3 track_source: Calling 'track_source drift49p2 013400.0 +115524 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-13 18:26:38 START begin_task: Starting task 'sending tracking commands' 2009-Jan-13 18:26:38 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift49p2} INFO {Slewing to source 'drift49p2' ...} 2009-Jan-13 18:26:38 INFO1 track_source: Starting to track drift49p2 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift49p2" 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: set ra 013400.0 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: set dec +115524 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: pnt tr 013400.0 +115524 -CJ 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:26:38 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-13 18:26:38 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:26:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-13 18:26:38 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-13 18:26:38 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-13 18:26:38 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-13 18:26:38 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-13 18:26:38 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-13 18:26:38 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:26:38 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-13 18:26:38 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-13 18:26:38 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 DONE finish_task: DONE finished selecting: new source 2009-Jan-13 18:26:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:26:38 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-13 18:26:38 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift49p2" 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: set ra 013400.0 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: set dec +115524 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% 013400.0 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% +115524 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: pnt tr 013400.0 +115524 -CJ 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-13 18:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:26 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Jan-13 18:27:26 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Jan-13 18:27:26 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:27:26 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-13 18:27:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-13 18:27:26 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-13 18:27:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-13 18:27:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-13 18:27:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:26 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-13 18:27:26 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-13 18:27:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-13 18:27:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:27:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-13 18:27:29 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-13 18:27:29 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:27:29 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-13 18:27:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-13 18:27:29 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-13 18:27:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2009-Jan-13 18:27:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-13 18:27:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-13 18:27:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-13 18:27:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-13 18:27:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-13 18:27:29 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.882 1.101 ALFA beam 1: 1.001 0.984 2009-Jan-13 18:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.986 0.957 ALFA beam 3: 1.056 1.061 2009-Jan-13 18:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.101 1.102 ALFA beam 5: 1.006 0.954 2009-Jan-13 18:27:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.905 0.101 ALFA beam 7: 1.011 0.111 2009-Jan-13 18:27:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:27:29 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Jan-13 18:27:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:27:29 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-13 18:27:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Jan-13 18:27:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:27:30 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-13 18:27:30 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-13 18:27:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-13 18:27:30 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:27:30 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-13 18:27:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Jan-13 18:27:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 1.101 1.001 0.984 2009-Jan-13 18:27:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.957 1.056 1.061 2009-Jan-13 18:27:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 1.102 1.006 0.954 2009-Jan-13 18:27:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.101 1.011 0.111 2009-Jan-13 18:27:32 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Jan-13 18:27:32 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift49p2 013400.0 +115524 J 0 Topocentric velocity(optical) 2009-Jan-13 18:27:32 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift49p2 013400.0 +115524 J 0 Topocentric velocity(optical)' 2009-Jan-13 18:27:32 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jan-13 18:27:32 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-13 18:27:32 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift49p2' 2009-Jan-13 18:27:33 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jan-13 18:27:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift49p2} 2009-Jan-13 18:27:33 INFO5 fixed_driftmap: Start: year = 2009.0376977970443 RA = 01:34:29.7 Dec = +11:58:18.4 2009-Jan-13 18:27:33 NOTE fixed_driftmap: Setting ZA to 6:22:55.3 ... 2009-Jan-13 18:27:33 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 6.38 2009-Jan-13 18:27:33 LOG3 track_source: Calling 'track_source drift49p2 360.0 6.3820224476 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Jan-13 18:27:33 START begin_task: Starting task 'sending tracking commands' 2009-Jan-13 18:27:33 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-13 18:27:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift49p2} INFO {Slewing to source 'drift49p2' ...} 2009-Jan-13 18:27:33 INFO1 track_source: Starting to track drift49p2 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift49p2" 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: set dec 6.3820224476 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: pnt tr 360.0 6.3820224476 -CF 2009-Jan-13 18:27:33 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:27:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-13 18:27:33 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-13 18:27:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-13 18:27:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-13 18:27:33 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-13 18:27:33 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:27:33 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-13 18:27:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-13 18:27:33 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-13 18:27:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Jan-13 18:27:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-13 18:27:33 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-13 18:27:33 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift49p2" 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: set dec 6.3820224476 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 6.3820224476 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 6.3820224476 -CF 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-13 18:27:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-13 18:27:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-13 18:27:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-13 18:27:34 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-13 18:27:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-13 18:27:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-13 18:27:34 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-13 18:27:34 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-13 18:27:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:34 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-13 18:27:34 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-13 18:27:34 START begin_task: Starting task 'waiting on telescope' 2009-Jan-13 18:27:34 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-13 18:27:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-13 18:27:34 LOG3 waittrk: Start waittrk 5 2009-Jan-13 18:27:34 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-13 18:27:34 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-13 18:27:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-13 18:27:39 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-13 18:27:39 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-13 18:27:39 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-13 18:27:46 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-13 18:27:46 INFO2 waittrk: Now tracking drift49p2 2009-Jan-13 18:27:46 LOG4 waittrk: Current telescope position: Az = 359.60 ZA = 6.34 2009-Jan-13 18:27:46 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-13 18:27:46 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jan-13 18:27:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-13 18:27:46 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 START begin_task: Starting task 'selecting calibration type' 2009-Jan-13 18:27:46 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-13 18:27:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-13 18:27:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:46 START begin_task: Starting task 'waiting on setcal' 2009-Jan-13 18:27:46 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-13 18:27:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-13 18:27:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:27:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-13 18:27:47 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-13 18:27:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:27:47 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-13 18:27:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:27:47 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:27:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:27:47 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:27:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-13 18:27:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:27:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:27:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:27:47 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:27:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:27:47 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:27:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:27:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-13 18:27:47 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Jan-13 18:27:47 INFO3 dopset_later: Setting Doppler correction now 2009-Jan-13 18:27:47 LOG5 antvel: Calling 'antvel 360.000000 6.382022 F Topocentric 0' 2009-Jan-13 18:27:47 LOG2 antvel: Transforming current Az = 360.00 ZA = 6.38 to apparent RA = 01:34:53.0 Dec = +11:58:18.4 2009-Jan-13 18:27:47 LOG2 antvel: Parameters to Doppler: Topocentric 80867 2009 13 0.0 2009-Jan-13 18:27:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-13 18:27:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-13 18:27:47 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-13 18:27:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-13 18:27:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-13 18:27:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:27:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:27:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:27:47 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-13 18:27:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-13 18:27:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-13 18:27:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-13 18:27:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-13 18:27:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:48 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-13 18:27:48 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:27:48 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-13 18:27:48 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-13 18:27:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-13 18:27:48 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-13 18:27:48 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-13 18:27:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-13 18:27:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-13 18:27:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-13 18:27:48 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-13 18:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:27:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-13 18:27:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2009-Jan-13 18:27:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Jan-13 18:27:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-13 18:27:48 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-13 18:27:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-13 18:27:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-13 18:27:48 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-13 18:27:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 1.104 ALFA beam 1: 1.008 0.969 2009-Jan-13 18:27:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.988 0.962 ALFA beam 3: 1.078 1.089 2009-Jan-13 18:27:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.121 0.901 ALFA beam 5: 1.012 0.961 2009-Jan-13 18:27:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.930 0.105 ALFA beam 7: 1.031 0.115 2009-Jan-13 18:27:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:27:49 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:27:49 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-13 18:27:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-13 18:27:49 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:27:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-13 18:27:49 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 01:34:29.7 LST = 01:34:54.0 diff = -24.4 secs 2009-Jan-13 18:27:49 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Jan-13 18:27:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:27:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:27:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:27:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:27:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-13 18:27:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-13 18:27:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-13 18:27:49 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-13 18:27:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-13 18:27:49 INFO2 take_data: Starting WAPP 600-second scan: 901300175 2009-Jan-13 18:27:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-13 18:27:49 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-13 18:27:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:27:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-13 18:27:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80870.00 2009-Jan-13 18:27:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20090113.a2010.0044.fits 2009-Jan-13 18:27:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090113.a2010.0044.fits} 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:27:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Jan-13 18:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:28:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:28:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:28:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:28:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:28:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:28:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.096 0.914 0.869 2009-Jan-13 18:28:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.958 1.076 1.085 2009-Jan-13 18:28:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.896 1.009 0.953 2009-Jan-13 18:28:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.104 1.019 0.114 2009-Jan-13 18:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:28:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:28:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:28:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:28:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:28:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:29:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:29:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:29:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:29:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:29:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:29:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:29:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.091 0.919 0.890 2009-Jan-13 18:29:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.955 1.076 1.083 2009-Jan-13 18:29:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.895 1.006 0.952 2009-Jan-13 18:29:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.104 1.018 0.114 2009-Jan-13 18:29:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Jan-13 18:29:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:29:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:29:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:29:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:30:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.122 (still bad) 2009-Jan-13 18:30:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:30:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:30:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:30:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:30:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:30:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:30:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:30:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:30:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:30:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:30:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:30:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:30:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.100 1.000 0.982 2009-Jan-13 18:30:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.956 1.079 1.083 2009-Jan-13 18:30:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.899 1.005 0.955 2009-Jan-13 18:30:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.016 0.114 2009-Jan-13 18:30:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:30:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:30:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:30:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:30:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:30:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:30:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:30:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:30:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:31:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:31:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.092 0.908 0.872 2009-Jan-13 18:31:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.953 1.075 1.081 2009-Jan-13 18:31:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.896 1.005 0.950 2009-Jan-13 18:31:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.104 1.015 0.114 2009-Jan-13 18:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:31:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Jan-13 18:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:31:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:32:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.114 (still bad) 2009-Jan-13 18:32:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:32:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:32:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jan-13 18:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jan-13 18:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:32:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:32:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:32:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:32:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:32:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.096 1.002 0.985 2009-Jan-13 18:32:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.951 1.074 1.080 2009-Jan-13 18:32:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.895 1.005 0.950 2009-Jan-13 18:32:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.014 0.114 2009-Jan-13 18:32:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:32:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:32:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:32:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:32:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:32:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:32:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:32:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:32:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:32:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:32:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:32:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:32:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:32:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:32:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:33:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:33:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:33:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:33:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:33:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Jan-13 18:33:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:33:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jan-13 18:33:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:33:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:33:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.098 0.994 0.979 2009-Jan-13 18:33:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.953 1.079 1.079 2009-Jan-13 18:33:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.898 1.005 0.950 2009-Jan-13 18:33:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.104 1.022 0.114 2009-Jan-13 18:33:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:33:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:33:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:33:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:33:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:33:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:33:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:33:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:34:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jan-13 18:34:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:34:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:34:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:34:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:34:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:34:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:34:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:34:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:34:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:34:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:34:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:34:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:34:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:34:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:34:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.093 0.912 0.884 2009-Jan-13 18:34:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.957 1.078 1.081 2009-Jan-13 18:34:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.896 1.004 0.953 2009-Jan-13 18:34:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.104 1.013 0.114 2009-Jan-13 18:34:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:34:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:34:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:34:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:34:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:34:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:34:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:34:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:34:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:35:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:35:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:35:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jan-13 18:35:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:35:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:35:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:35:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:35:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:35:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:35:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:35:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:35:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:35:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:35:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.100 0.994 0.982 2009-Jan-13 18:35:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.957 1.072 1.083 2009-Jan-13 18:35:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.898 1.006 0.956 2009-Jan-13 18:35:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.104 1.014 0.114 2009-Jan-13 18:35:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:35:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:35:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:35:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:35:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:35:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:35:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:35:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:35:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:35:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:36:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:36:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jan-13 18:36:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jan-13 18:36:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:36:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jan-13 18:36:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:36:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jan-13 18:36:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:36:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:36:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:36:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:36:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:36:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jan-13 18:36:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:36:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:36:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:36:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:36:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:36:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:36:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:36:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jan-13 18:36:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:36:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:36:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.092 0.912 0.874 2009-Jan-13 18:36:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.955 1.071 1.082 2009-Jan-13 18:36:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.899 1.005 0.947 2009-Jan-13 18:36:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.104 1.012 0.114 2009-Jan-13 18:36:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:36:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:36:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:36:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:36:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:36:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:36:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:36:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:36:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:36:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:36:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:37:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:37:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:37:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:37:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:37:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:37:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:37:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:37:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:37:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:37:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:37:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:37:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:37:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:37:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:37:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:37:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:37:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:37:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jan-13 18:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:37:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:37:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:37:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-13 18:37:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.101 1.004 0.961 2009-Jan-13 18:37:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 0.955 1.073 1.082 2009-Jan-13 18:37:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.893 1.005 0.945 2009-Jan-13 18:37:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.017 0.114 2009-Jan-13 18:37:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:37:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:37:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:37:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-13 18:37:50 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-13 18:37:50 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG1 fixed_driftmap: New position: year = 2009.0377173802826 RA = 01:44:28.7 RA/Dec = 01:44:58.6 +11:58:15.1 2009-Jan-13 18:37:50 NOTE fixed_driftmap: Correcting ZA to 6:22:58.6 ... 2009-Jan-13 18:37:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 6.3829574555 -CF 2009-Jan-13 18:37:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-13 18:37:50 START begin_task: Starting task 'WAPP calibration' 2009-Jan-13 18:37:50 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-13 18:37:50 START begin_task: Starting task 'selecting calibration type' 2009-Jan-13 18:37:50 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-13 18:37:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-13 18:37:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:37:50 START begin_task: Starting task 'waiting on setcal' 2009-Jan-13 18:37:50 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 6.3829574555 -CF 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-13 18:37:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-13 18:37:50 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-13 18:37:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:37:50 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-13 18:37:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:37:50 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-13 18:37:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-13 18:37:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:37:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:37:51 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:37:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-13 18:37:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-13 18:37:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:37:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-13 18:37:51 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-13 18:37:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-13 18:37:51 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-13 18:37:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-13 18:37:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-13 18:37:51 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-13 18:37:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-13 18:37:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-13 18:37:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:37:51 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:37:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-13 18:37:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:37:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:37:51 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-13 18:37:51 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-13 18:37:51 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-13 18:37:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-13 18:37:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-13 18:37:51 INFO2 take_data: Starting WAPP 1-second scan: 901300176 2009-Jan-13 18:37:52 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-13 18:37:52 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-13 18:37:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:37:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-13 18:37:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81473.00 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:37:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-13 18:37:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-13 18:37:54 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-13 18:37:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-13 18:37:54 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-13 18:37:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-13 18:37:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-13 18:37:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-13 18:37:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-13 18:37:54 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-13 18:37:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-13 18:37:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-13 18:37:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-13 18:37:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-13 18:37:54 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-13 18:37:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-13 18:37:54 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-13 18:37:54 LOG5 finish_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-13 18:37:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-13 18:37:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-13 18:37:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-13 18:37:54 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-13 18:37:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Jan-13 18:37:55 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-13 18:37:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:37:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:37:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:37:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Sabrina Stierwalt 2009-Jan-13 18:37:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-13 18:37:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-13 18:37:55 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-13 18:37:55 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-13 18:37:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-13 18:37:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-13 18:37:55 INFO2 take_data: Starting WAPP 600-second scan: 901300177 2009-Jan-13 18:37:55 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-13 18:37:55 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-13 18:37:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Sabrina Stierwalt' 2009-Jan-13 18:37:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-13 18:37:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-13 18:37:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81476.00 2009-Jan-13 18:37:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20090113.a2010.0045.fits 2009-Jan-13 18:37:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090113.a2010.0045.fits} 2009-Jan-13 18:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.551 (still bad) 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1048.986000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1186.296000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1431.014000 MHz 2009-Jan-13 18:37:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jan-13 18:37:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:37:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:38:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:38:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:38:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jan-13 18:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:38:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:38:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:38:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:38:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:38:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:38:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:38:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:38:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jan-13 18:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jan-13 18:38:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jan-13 18:38:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jan-13 18:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:38:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:38:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:38:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:38:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:38:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:38:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:38:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:38:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:38:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:38:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:38:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jan-13 18:38:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.097 0.998 0.980 2009-Jan-13 18:38:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 0.952 1.074 1.081 2009-Jan-13 18:38:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.894 1.002 0.945 2009-Jan-13 18:38:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.103 1.011 0.113 2009-Jan-13 18:38:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:38:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:38:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:38:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:38:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:38:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jan-13 18:39:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:39:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:39:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jan-13 18:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jan-13 18:39:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:39:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:39:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jan-13 18:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jan-13 18:39:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-13 18:39:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jan-13 18:39:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jan-13 18:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:39:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-13 18:39:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jan-13 18:39:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jan-13 18:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:39:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jan-13 18:39:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jan-13 18:39:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-13 18:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jan-13 18:39:46 LOG3 WAPP=4-chip_count: Counts don't match be