2009-Jan-11 18:16:28 BEGIN executive: CIMA executive starting ... 2009-Jan-11 18:16:29 NOTE executive: STARTING NEW CIMA SESSION 2009-Jan-11 18:16:29 INFO1 executive: Using CIMA version 3.1.02 'smart' from 2008-12-29 17:19 2009-Jan-11 18:16:29 INFO4 executive: This is an ON-LINE session 2009-Jan-11 18:16:29 INFO4 executive: This is a LOCAL session 2009-Jan-11 18:16:29 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jan-11 18:16:29 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann & Sabrina' 2009-Jan-11 18:16:29 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090111' 2009-Jan-11 18:16:29 LOG2 log_preferences: Currently applied preferences: 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(datawindow) = open 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(logcolours) = full 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(displayformat) = long 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(logformat) = new 2009-Jan-11 18:16:29 LOG2 log_preferences: prefs(fontsize) = 3 2009-Jan-11 18:16:29 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-11 18:16:29 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-11 18:16:29 ALERT executive: CIMA executive ready 2009-Jan-11 18:16:30 NOTE frontend: CIMA frontend ready 2009-Jan-11 18:16:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:16:33 LOG4 got_cormsg: From DATATAKING: setup 2009-Jan-11 18:16:36 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jan-11 18:16:36 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Jan-11 18:16:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Jan-11 18:16:36 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-11 18:16:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-11 18:16:36 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-11 18:16:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-11 18:16:36 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-11 18:16:36 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-11 18:16:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-11 18:16:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-11 18:16:36 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-11 18:16:36 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Jan-11 18:16:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:16:36 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-11 18:16:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Jan-11 18:16:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jan-11 18:16:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:16:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:16:46 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2009-Jan-11 18:17:16 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-11 18:17:16 LOG4 exec_msg: From OBSERVER: track_new_source drift34p2 012500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-11 18:17:16 LOG1 track_new_source: Calling 'track_new_source drift34p2 012500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-11 18:17:16 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-11 18:17:16 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Selecting source 'drift34p2' ...} 2009-Jan-11 18:17:16 LOG3 track_source: Calling 'track_source drift34p2 012500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:17:16 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:17:16 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:17:16 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: set ra 012500.0 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: pnt tr 012500.0 +081624 -CJ 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:17:16 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:17:16 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:17:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:17:16 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-11 18:17:16 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-11 18:17:16 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-11 18:17:16 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:17:16 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-11 18:17:16 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:17:16 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-11 18:17:16 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-11 18:17:16 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 DONE finish_task: DONE finished selecting: new source 2009-Jan-11 18:17:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:17:16 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-11 18:17:16 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: set ra 012500.0 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: pnt tr 012500.0 +081624 -CJ 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:17:16 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:17:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:17:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:17:26 LOG4 got_cormsg: From DATATAKING: vw% 012500.0 2009-Jan-11 18:17:26 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:17:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% vw% 2009-Jan-11 18:23:31 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 714.0) to the azimuth limit 720 degrees! 2009-Jan-11 18:23:31 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 713.9697 10.0221 RA/Dec = 01:25:00 +08:16:24 2009-Jan-11 18:23:44 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2009-Jan-11 18:23:50 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Jan-11 18:23:54 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Jan-11 18:23:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Jan-11 18:23:55 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Jan-11 18:23:55 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-11 18:23:55 LOG5 begin_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-11 18:23:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Jan-11 18:23:55 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Jan-11 18:23:55 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Jan-11 18:23:55 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-11 18:23:55 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jan-11 18:23:55 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Jan-11 18:23:55 LOG2 CIMA-antvel: Precessing RA = 01:25:00.0 Dec = +08:16:24.0 Epoch = 2009.03222 J 2009-Jan-11 18:23:55 LOG2 CIMA-antvel: Computed apparent RA = 01:25:29.3 Dec = +08:19:19.8 2009-Jan-11 18:23:55 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80635 2009 11 0.0 2009-Jan-11 18:23:55 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:23:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-11 18:23:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-11 18:23:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-11 18:23:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-11 18:23:57 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-11 18:23:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-11 18:23:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-11 18:23:57 INFO1 config_iflo: Selecting receiver ALFA 2009-Jan-11 18:23:57 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jan-11 18:23:57 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jan-11 18:23:57 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-11 18:23:57 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-11 18:23:57 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-11 18:23:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-11 18:23:57 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-11 18:23:57 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-11 18:23:57 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-11 18:23:57 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-11 18:23:57 LOG5 finish_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-11 18:23:57 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jan-11 18:23:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:23:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-11 18:23:58 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jan-11 18:23:58 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jan-11 18:23:58 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jan-11 18:23:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jan-11 18:23:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:23:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:23:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:23:58 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:23:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:23:58 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:23:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jan-11 18:23:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-11 18:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jan-11 18:23:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-11 18:23:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:23:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-11 18:23:58 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jan-11 18:23:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:24:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:24:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-11 18:24:15 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-11 18:24:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-11 18:24:15 LOG5 finish_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-11 18:24:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:24:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-11 18:24:15 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-11 18:24:15 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-11 18:24:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-11 18:24:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-11 18:24:15 START begin_task: Starting task 'selecting calibration port' 2009-Jan-11 18:24:15 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-11 18:24:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-11 18:24:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:24:15 START begin_task: Starting task 'waiting on calport' 2009-Jan-11 18:24:15 LOG5 begin_task: Level: (4) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:24:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-11 18:24:15 LOG5 end_task: Level: (4) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-11 18:24:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-11 18:24:15 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:24:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:24:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:24:15 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:24:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:24:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:24:15 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-11 18:24:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-11 18:24:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:24:15 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:24:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:24:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:24:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:24:16 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:24:16 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-11 18:24:16 LOG5 finish_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-11 18:24:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:24:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-11 18:24:16 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Jan-11 18:24:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Jan-11 18:24:16 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Jan-11 18:24:16 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Jan-11 18:24:16 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jan-11 18:24:16 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jan-11 18:24:16 LOG3 track_source: Calling 'track_source galfasrc 012300.0 +081624 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:24:16 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:24:16 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jan-11 18:24:16 INFO1 track_source: Starting to track galfasrc 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: set ra 012300.0 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: pnt tr 012300.0 +081624 -CJ 2009-Jan-11 18:24:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:24:16 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:24:16 LOG5 finish_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:24:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:24:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:24:16 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jan-11 18:24:16 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-11 18:24:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jan-11 18:24:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:24:17 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jan-11 18:24:17 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-11 18:24:17 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Jan-11 18:24:17 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jan-11 18:24:17 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:24:17 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-11 18:24:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-11 18:24:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-11 18:24:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-11 18:24:17 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-11 18:24:17 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-11 18:24:17 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-11 18:24:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20090111.a2010.0041.fits 2009-Jan-11 18:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-11 18:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-11 18:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-11 18:24:17 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090111.a2010.0041.fits} 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: set ra 012300.0 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: vw% 012300.0 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: pnt tr 012300.0 +081624 -CJ 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:24:18 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-11 18:24:18 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-11 18:24:18 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-11 18:24:18 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-11 18:24:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:24:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:24:18 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-11 18:24:18 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-11 18:24:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:24:18 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-11 18:24:18 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-11 18:24:18 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Jan-11 18:24:18 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jan-11 18:24:18 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-11 18:24:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-11 18:24:18 LOG3 waittrk: Start waittrk 5 2009-Jan-11 18:24:18 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-11 18:24:18 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-11 18:24:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-11 18:24:23 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-11 18:24:23 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-11 18:24:23 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-11 18:38:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-11 18:38:02 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-11 18:38:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:38:02 INFO2 waittrk: Now tracking galfasrc 2009-Jan-11 18:38:02 LOG4 waittrk: Current telescope position: Az = 378.64 ZA = 10.55 2009-Jan-11 18:38:02 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-11 18:38:02 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-11 18:38:02 DONE finish_task: DONE finished waiting: telescope on source 2009-Jan-11 18:38:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:38:02 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-11 18:38:02 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-11 18:38:02 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-11 18:38:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jan-11 18:38:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-11 18:38:03 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-11 18:38:03 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jan-11 18:38:03 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jan-11 18:38:03 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jan-11 18:38:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jan-11 18:38:03 START begin_task: Starting task 'selecting calibration type' 2009-Jan-11 18:38:03 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-11 18:38:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-11 18:38:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:38:03 START begin_task: Starting task 'waiting on setcal' 2009-Jan-11 18:38:03 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-11 18:38:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:38:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-11 18:38:03 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-11 18:38:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:38:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-11 18:38:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:38:03 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:38:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:38:03 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:38:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-11 18:38:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:38:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:38:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:38:03 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:38:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:38:03 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:38:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:38:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-11 18:38:03 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-11 18:38:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:38:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:38:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:38:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:38:03 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090111.a2010.0041.fits' is empty! 2009-Jan-11 18:38:03 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jan-11 18:38:04 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-11 18:38:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-11 18:38:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:38:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:38:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:38:04 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-11 18:38:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:38:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:38:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:38:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:38:04 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-11 18:38:04 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-11 18:38:04 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:38:04 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-11 18:38:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-11 18:38:04 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-11 18:38:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-11 18:38:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-11 18:38:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:38:04 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-11 18:38:04 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-11 18:38:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-11 18:38:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:38:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:38:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-11 18:38:07 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-11 18:38:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-11 18:38:07 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:38:07 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-11 18:38:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-11 18:38:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:38:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:38:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:38:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:38:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-11 18:38:07 LOG5 begin_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-11 18:38:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-11 18:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 5 dB 2009-Jan-11 18:38:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2009-Jan-11 18:38:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-11 18:38:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-11 18:38:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-11 18:38:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-11 18:38:07 LOG5 end_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.900 0.880 ALFA beam 1: 0.916 1.094 2009-Jan-11 18:38:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.999 0.951 ALFA beam 3: 1.083 1.082 2009-Jan-11 18:38:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.890 1.105 ALFA beam 5: 1.051 0.986 2009-Jan-11 18:38:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.950 0.103 ALFA beam 7: 1.065 0.113 2009-Jan-11 18:38:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:38:08 LOG5 finish_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:38:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:38:08 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-11 18:38:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:38:08 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:38:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:38:08 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:38:08 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-11 18:38:08 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:38:08 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:38:08 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:38:08 LOG2 antvel: Parameters to Doppler: Topocentric 81487 2009 11 0.0 2009-Jan-11 18:38:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:38:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-11 18:38:08 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-11 18:38:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:38:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:38:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:38:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-11 18:38:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:38:08 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:38:08 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.622672 2009.0322422174056 18.999933 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333342 8.273333333333335 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 1 1.384433690361489 8.378206198444952 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 2 1.378558659275084 8.333571842125288 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 3 1.377421779298493 8.228766194426610 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 4 1.382255983109042 8.168380164280929 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 5 1.388157110198782 8.213569343186345 2009-Jan-11 18:38:08 LOG4 log_alfabeam: ALFABEAM 6 1.389197885410024 8.318585124256421 2009-Jan-11 18:38:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100164 2009-Jan-11 18:38:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:38:08 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-11 18:38:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:38:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:38:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:38:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81489.00 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jan-11 18:38:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.922 0.944 1.115 2009-Jan-11 18:38:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.998 1.159 1.127 2009-Jan-11 18:38:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 1.105 1.051 0.986 2009-Jan-11 18:38:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.103 1.065 0.113 2009-Jan-11 18:38:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.158 (still bad) 2009-Jan-11 18:38:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.161 (still bad) 2009-Jan-11 18:38:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.158 (still bad) 2009-Jan-11 18:38:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:38:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.158 (still bad) 2009-Jan-11 18:38:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:38:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:38:19 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-11 18:38:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:38:19 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-11 18:38:19 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-11 18:38:19 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:38:19 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-11 18:38:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:38:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:38:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:38:19 LOG2 antvel: Parameters to Doppler: Topocentric 81499 2009 11 0.0 2009-Jan-11 18:38:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:38:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-11 18:38:19 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-11 18:38:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:38:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:38:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:38:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-11 18:38:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:38:19 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-11 18:38:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:38:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.626015 2009.0322425976626 18.999933 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333343 8.273333333333333 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 1 1.384463826410013 8.378135589576965 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 2 1.378575986156444 8.333873439419689 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 3 1.377409053120380 8.229140599554352 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 4 1.382225805832125 8.168449437987180 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 5 1.388139844441893 8.213263900367833 2009-Jan-11 18:38:19 LOG4 log_alfabeam: ALFABEAM 6 1.389210878810306 8.318212624548492 2009-Jan-11 18:38:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100165 2009-Jan-11 18:38:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:38:20 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-11 18:38:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:38:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:38:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:38:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81501.00 2009-Jan-11 18:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.165 (still bad) 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:38:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Jan-11 18:38:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:38:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Jan-11 18:38:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Jan-11 18:38:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:38:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Jan-11 18:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Jan-11 18:38:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:38:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:38:31 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-11 18:38:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:38:31 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-11 18:38:31 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-11 18:38:31 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:38:31 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-11 18:38:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:38:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:38:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:38:31 LOG2 antvel: Parameters to Doppler: Topocentric 81511 2009 11 0.0 2009-Jan-11 18:38:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:38:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-11 18:38:31 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-11 18:38:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:38:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:38:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:38:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-11 18:38:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:38:31 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-11 18:38:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:38:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.629357 2009.0322429779199 18.999933 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333346 8.273333333333330 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 1 1.384493841641596 8.378063318002516 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 2 1.378593341043501 8.334172937418291 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 3 1.377396476733810 8.229514550401648 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 4 1.382195748695397 8.168520385179972 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 5 1.388122548258653 8.212960561279058 2009-Jan-11 18:38:31 LOG4 log_alfabeam: ALFABEAM 6 1.389223722627385 8.317840537560214 2009-Jan-11 18:38:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100166 2009-Jan-11 18:38:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:38:32 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-11 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:38:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:38:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:38:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81513.00 2009-Jan-11 18:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.150 (still bad) 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.141 (still bad) 2009-Jan-11 18:38:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Jan-11 18:38:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Jan-11 18:38:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Jan-11 18:38:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.144 (still bad) 2009-Jan-11 18:38:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:38:43 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-11 18:38:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:38:43 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-11 18:38:43 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-11 18:38:43 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:38:43 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-11 18:38:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:38:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:38:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:38:43 LOG2 antvel: Parameters to Doppler: Topocentric 81523 2009 11 0.0 2009-Jan-11 18:38:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:38:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-11 18:38:43 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-11 18:38:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:38:43 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:38:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:38:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-11 18:38:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:38:43 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-11 18:38:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:38:43 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.632699 2009.0322433581769 18.999933 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333338 8.273333333333337 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 1 1.384523743989936 8.377989383297844 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 2 1.378610727587285 8.334470423909607 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 3 1.377384045861431 8.229888135714669 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 4 1.382165803764360 8.168593005958684 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 5 1.388105218030302 8.212659237438931 2009-Jan-11 18:38:43 LOG4 log_alfabeam: ALFABEAM 6 1.389236421182074 8.317468775245622 2009-Jan-11 18:38:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100167 2009-Jan-11 18:38:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:38:44 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-11 18:38:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:38:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:38:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:38:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81525.00 2009-Jan-11 18:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.144 (still bad) 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:38:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Jan-11 18:38:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Jan-11 18:38:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Jan-11 18:38:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Jan-11 18:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:38:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:38:55 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-11 18:38:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:38:55 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-11 18:38:55 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-11 18:38:55 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:38:55 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-11 18:38:55 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:38:55 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:38:55 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:38:55 LOG2 antvel: Parameters to Doppler: Topocentric 81535 2009 11 0.0 2009-Jan-11 18:38:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:38:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-11 18:38:55 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-11 18:38:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:38:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:38:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:38:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-11 18:38:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:38:55 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-11 18:38:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:38:55 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.636042 2009.0322437384339 18.999933 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333343 8.273333333333341 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 1 1.384553541283746 8.377913783145850 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 2 1.378628149485723 8.334765984650337 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 3 1.377371756378943 8.230261444086521 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 4 1.382135963208788 8.168667302325252 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 5 1.388087850088868 8.212359842396268 2009-Jan-11 18:38:55 LOG4 log_alfabeam: ALFABEAM 6 1.389248978642827 8.317097249671717 2009-Jan-11 18:38:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100168 2009-Jan-11 18:38:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:38:56 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-11 18:38:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Jan-11 18:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:38:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:38:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:38:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:38:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81537.00 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-11 18:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:38:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:38:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Jan-11 18:39:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-11 18:39:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Jan-11 18:39:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:39:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Jan-11 18:39:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:39:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:39:07 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-11 18:39:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:39:07 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-11 18:39:07 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-11 18:39:07 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:39:07 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-11 18:39:07 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:39:07 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:39:07 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:39:07 LOG2 antvel: Parameters to Doppler: Topocentric 81547 2009 11 0.0 2009-Jan-11 18:39:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:39:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-11 18:39:07 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-11 18:39:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:39:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:39:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:39:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-11 18:39:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:39:07 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-11 18:39:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:39:07 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.639384 2009.0322441186909 18.999933 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333337 8.273333333333335 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 1 1.384583214658473 8.377836583410472 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 2 1.378645594806847 8.335059440833804 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 3 1.377359615148132 8.230634229447023 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 4 1.382106245930540 8.168743209265269 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 5 1.388070456348504 8.212062557697026 2009-Jan-11 18:39:07 LOG4 log_alfabeam: ALFABEAM 6 1.389261387951807 8.316726205983560 2009-Jan-11 18:39:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100169 2009-Jan-11 18:39:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:39:08 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-11 18:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:39:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:39:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:39:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Jan-11 18:39:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:39:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81549.00 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-11 18:39:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Jan-11 18:39:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 0.895 0.907 1.092 2009-Jan-11 18:39:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.973 1.094 1.098 2009-Jan-11 18:39:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 1.122 1.043 0.979 2009-Jan-11 18:39:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.105 1.079 0.115 2009-Jan-11 18:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Jan-11 18:39:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Jan-11 18:39:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.128 (still bad) 2009-Jan-11 18:39:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:39:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:39:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:39:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:39:19 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-11 18:39:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:39:19 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-11 18:39:19 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-11 18:39:19 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:39:19 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-11 18:39:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:39:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:39:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:39:19 LOG2 antvel: Parameters to Doppler: Topocentric 81559 2009 11 0.0 2009-Jan-11 18:39:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:39:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-11 18:39:19 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-11 18:39:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:39:19 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-11 18:39:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:39:19 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-11 18:39:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:39:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.642727 2009.0322444989479 18.999933 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333342 8.273333333333330 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 1 1.384612780863659 8.377757758616118 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 2 1.378663072490804 8.335350966460199 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 3 1.377347614392189 8.231006692437230 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 4 1.382076635165420 8.168820751546869 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 5 1.388053027914935 8.211767207488885 2009-Jan-11 18:39:19 LOG4 log_alfabeam: ALFABEAM 6 1.389273657011000 8.316355444732395 2009-Jan-11 18:39:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100170 2009-Jan-11 18:39:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:39:20 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-11 18:39:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:39:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Jan-11 18:39:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:39:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81561.00 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Jan-11 18:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Jan-11 18:39:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:39:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Jan-11 18:39:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Jan-11 18:39:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:39:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:39:31 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-11 18:39:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:39:31 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-11 18:39:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-11 18:39:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-11 18:39:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-11 18:39:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:39:31 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-11 18:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:39:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-11 18:39:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:39:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:39:31 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-11 18:39:31 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-11 18:39:31 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:39:31 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-11 18:39:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:39:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03224 J 2009-Jan-11 18:39:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:39:31 LOG2 antvel: Parameters to Doppler: Topocentric 81571 2009 11 0.0 2009-Jan-11 18:39:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:39:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-11 18:39:31 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-11 18:39:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:39:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:39:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:39:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-11 18:39:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:39:31 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-11 18:39:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:39:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.646069 2009.0322448792051 18.999933 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333342 8.273333333333333 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 1 1.384642221232677 8.377677376709563 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 2 1.378680570591979 8.335640385865526 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 3 1.377335760760222 8.231378588079199 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 4 1.382047149618173 8.168899862053280 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 5 1.388035576719604 8.211473970156089 2009-Jan-11 18:39:31 LOG4 log_alfabeam: ALFABEAM 6 1.389285778975819 8.315985210036185 2009-Jan-11 18:39:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100171 2009-Jan-11 18:39:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:39:32 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-11 18:39:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:39:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:39:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:39:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81573.00 2009-Jan-11 18:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.599 (still bad) 2009-Jan-11 18:39:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.599 (still bad) 2009-Jan-11 18:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Jan-11 18:39:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.599 (still bad) 2009-Jan-11 18:39:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.601 (still bad) 2009-Jan-11 18:39:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:39:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:39:43 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-11 18:39:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:39:43 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-11 18:39:43 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-11 18:39:43 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:39:43 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-11 18:39:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:39:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:39:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:39:43 LOG2 antvel: Parameters to Doppler: Topocentric 81583 2009 11 0.0 2009-Jan-11 18:39:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:39:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-11 18:39:43 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-11 18:39:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:39:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:39:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:39:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-11 18:39:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:39:43 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-11 18:39:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:39:43 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.649412 2009.0322452594621 18.999933 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333347 8.273333333333341 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 1 1.384671552435101 8.377595410448386 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 2 1.378698098102499 8.335927871353471 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 3 1.377324046608497 8.231750117074593 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 4 1.382017772603817 8.168980567325262 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 5 1.388018093814235 8.211182671535724 2009-Jan-11 18:39:43 LOG4 log_alfabeam: ALFABEAM 6 1.389297761616131 8.315615302353468 2009-Jan-11 18:39:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100172 2009-Jan-11 18:39:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:39:44 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-11 18:39:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:39:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:39:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:39:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81585.00 2009-Jan-11 18:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.605 (still bad) 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.589 (still bad) 2009-Jan-11 18:39:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Jan-11 18:39:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Jan-11 18:39:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.589 (still bad) 2009-Jan-11 18:39:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.589 (still bad) 2009-Jan-11 18:39:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:39:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:39:55 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-11 18:39:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:39:55 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-11 18:39:55 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-11 18:39:55 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:39:55 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-11 18:39:55 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:39:55 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:39:55 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:39:55 LOG2 antvel: Parameters to Doppler: Topocentric 81595 2009 11 0.0 2009-Jan-11 18:39:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:39:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-11 18:39:55 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-11 18:39:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:39:55 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:39:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:39:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-11 18:39:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:39:55 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-11 18:39:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:39:55 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.652754 2009.0322456397191 18.999933 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333343 8.273333333333337 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 1 1.384700756004179 8.377511929780482 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 2 1.378715643068049 8.336213250386328 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 3 1.377312478376538 8.232121035603047 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 4 1.381988522628019 8.169062798225157 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 5 1.388000591142506 8.210893486865272 2009-Jan-11 18:39:55 LOG4 log_alfabeam: ALFABEAM 6 1.389309598297680 8.315245964708581 2009-Jan-11 18:39:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100173 2009-Jan-11 18:39:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:39:56 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-11 18:39:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:39:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:39:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:39:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:39:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:39:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81597.00 2009-Jan-11 18:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.598 (still bad) 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:39:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.587 (still bad) 2009-Jan-11 18:39:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.588 (still bad) 2009-Jan-11 18:40:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.589 (still bad) 2009-Jan-11 18:40:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.585 (still bad) 2009-Jan-11 18:40:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:40:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:40:07 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-11 18:40:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:40:07 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-11 18:40:07 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-11 18:40:07 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:40:07 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-11 18:40:07 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:40:07 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:40:07 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:40:07 LOG2 antvel: Parameters to Doppler: Topocentric 81607 2009 11 0.0 2009-Jan-11 18:40:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:40:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-11 18:40:07 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-11 18:40:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:40:07 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:40:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:40:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-11 18:40:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:40:07 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-11 18:40:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:40:07 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.656097 2009.0322460199761 18.999933 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333341 8.273333333333335 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 1 1.384729848526785 8.377426905715200 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 2 1.378733214530580 8.336496693549503 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 3 1.377301048554235 8.232491544386114 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 4 1.381959383087716 8.169146583048148 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 5 1.387983059704279 8.210606243693841 2009-Jan-11 18:40:07 LOG4 log_alfabeam: ALFABEAM 6 1.389321296657553 8.314876997507731 2009-Jan-11 18:40:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100174 2009-Jan-11 18:40:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:40:08 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-11 18:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.588 (still bad) 2009-Jan-11 18:40:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:40:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:40:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:40:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81609.00 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Jan-11 18:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.580 (still bad) 2009-Jan-11 18:40:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:40:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Jan-11 18:40:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.263 1.229 1.246 1.485 2009-Jan-11 18:40:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.401 1.343 1.556 1.526 2009-Jan-11 18:40:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.275 1.584 1.501 1.322 2009-Jan-11 18:40:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.365 0.107 1.520 0.116 2009-Jan-11 18:40:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.579 (still bad) 2009-Jan-11 18:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.582 (still bad) 2009-Jan-11 18:40:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:40:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:40:19 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-11 18:40:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:40:19 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-11 18:40:19 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-11 18:40:19 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:40:19 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-11 18:40:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:40:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:40:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:40:19 LOG2 antvel: Parameters to Doppler: Topocentric 81619 2009 11 0.0 2009-Jan-11 18:40:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:40:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-11 18:40:19 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-11 18:40:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:40:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:40:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:40:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-11 18:40:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:40:19 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-11 18:40:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:40:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.659439 2009.0322464002331 18.999933 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333334 8.273333333333328 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 1 1.384758811737691 8.377340410120505 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 2 1.378750800531884 8.336778031412873 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 3 1.377289763374766 8.232861400823346 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 4 1.381930372287845 8.169231850716786 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 5 1.387965511450591 8.210321114129608 2009-Jan-11 18:40:19 LOG4 log_alfabeam: ALFABEAM 6 1.389332850268705 8.314508642618129 2009-Jan-11 18:40:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100175 2009-Jan-11 18:40:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:40:20 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-11 18:40:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:40:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:40:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.587 (still bad) 2009-Jan-11 18:40:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:40:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81621.00 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.569 (still bad) 2009-Jan-11 18:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Jan-11 18:40:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Jan-11 18:40:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Jan-11 18:40:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Jan-11 18:40:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:40:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:40:31 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-11 18:40:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:40:31 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-11 18:40:31 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-11 18:40:31 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:40:31 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-11 18:40:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:40:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:40:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:40:31 LOG2 antvel: Parameters to Doppler: Topocentric 81631 2009 11 0.0 2009-Jan-11 18:40:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:40:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-11 18:40:31 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-11 18:40:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:40:31 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:40:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:40:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-11 18:40:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:40:31 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-11 18:40:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:40:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.662782 2009.0322467804904 18.999933 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333340 8.273333333333332 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 1 1.384787662138377 8.377252412277096 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 2 1.378768410161528 8.337057432822656 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 3 1.377278615462089 8.233230805615277 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 4 1.381901473710032 8.169318631261337 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 5 1.387947937331691 8.210037927455277 2009-Jan-11 18:40:31 LOG4 log_alfabeam: ALFABEAM 6 1.389344266635031 8.314140700434210 2009-Jan-11 18:40:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100176 2009-Jan-11 18:40:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:40:32 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-11 18:40:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:40:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:40:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.574 (still bad) 2009-Jan-11 18:40:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81633.00 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Jan-11 18:40:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.564 (still bad) 2009-Jan-11 18:40:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Jan-11 18:40:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:40:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Jan-11 18:40:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Jan-11 18:40:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:40:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:40:43 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-11 18:40:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:40:43 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-11 18:40:43 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-11 18:40:43 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:40:43 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-11 18:40:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:40:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:40:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:40:43 LOG2 antvel: Parameters to Doppler: Topocentric 81643 2009 11 0.0 2009-Jan-11 18:40:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:40:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-11 18:40:43 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-11 18:40:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:40:43 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:40:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:40:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-11 18:40:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:40:43 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-11 18:40:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:40:43 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.666124 2009.0322471607474 18.999933 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333336 8.273333333333337 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 1 1.384816381666554 8.377162985892648 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 2 1.378786031462085 8.337334731435373 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 3 1.377267610846363 8.233599517440689 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 4 1.381872705456889 8.169406851744856 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 5 1.387930349301171 8.209756852669637 2009-Jan-11 18:40:43 LOG4 log_alfabeam: ALFABEAM 6 1.389355539533390 8.313773411605499 2009-Jan-11 18:40:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100177 2009-Jan-11 18:40:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:40:44 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-11 18:40:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:40:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:40:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:40:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81645.00 2009-Jan-11 18:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.578 (still bad) 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.572 (still bad) 2009-Jan-11 18:40:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.573 (still bad) 2009-Jan-11 18:40:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Jan-11 18:40:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.571 (still bad) 2009-Jan-11 18:40:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:40:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.576 (still bad) 2009-Jan-11 18:40:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:40:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:40:55 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-11 18:40:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:40:55 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-11 18:40:55 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jan-11 18:40:55 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-11 18:40:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-11 18:40:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:40:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:40:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:40:55 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-11 18:40:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:40:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:40:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:40:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:40:55 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-11 18:40:55 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-11 18:40:55 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-11 18:40:55 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:40:55 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-11 18:40:55 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:40:55 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:40:55 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:40:55 LOG2 antvel: Parameters to Doppler: Topocentric 81655 2009 11 0.0 2009-Jan-11 18:40:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:40:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-11 18:40:55 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-11 18:40:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:40:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:40:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:40:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-11 18:40:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:40:55 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-11 18:40:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:40:55 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.669466 2009.0322475410044 18.999933 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333334 8.273333333333333 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 1 1.384844978197440 8.377072125939629 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 2 1.378803668288939 8.337610012269851 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 3 1.377256745516362 8.233967626883770 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 4 1.381844059650456 8.169496516868319 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 5 1.387912743532426 8.209477804003907 2009-Jan-11 18:40:55 LOG4 log_alfabeam: ALFABEAM 6 1.389366673023480 8.313406686201265 2009-Jan-11 18:40:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100178 2009-Jan-11 18:40:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:40:56 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-11 18:40:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:40:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:40:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:40:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-11 18:40:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81657.00 2009-Jan-11 18:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.576 (still bad) 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:40:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.160 (still bad) 2009-Jan-11 18:41:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.159 (still bad) 2009-Jan-11 18:41:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.158 (still bad) 2009-Jan-11 18:41:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.160 (still bad) 2009-Jan-11 18:41:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:41:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:41:07 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-11 18:41:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:41:07 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-11 18:41:07 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-11 18:41:07 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:41:07 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-11 18:41:07 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:41:07 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:41:07 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:41:07 LOG2 antvel: Parameters to Doppler: Topocentric 81667 2009 11 0.0 2009-Jan-11 18:41:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:41:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-11 18:41:07 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-11 18:41:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:41:07 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:41:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:41:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-11 18:41:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:41:07 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-11 18:41:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:41:07 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.672809 2009.0322479212614 18.999933 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333342 8.273333333333328 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 1 1.384873459487577 8.376979825686769 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 2 1.378821324528543 8.337883358250869 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 3 1.377246015611507 8.234335224121869 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 4 1.381815528530654 8.169587633046595 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 5 1.387895116165378 8.209200697786375 2009-Jan-11 18:41:07 LOG4 log_alfabeam: ALFABEAM 6 1.389377671014548 8.313040434657767 2009-Jan-11 18:41:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100179 2009-Jan-11 18:41:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:41:08 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-11 18:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.170 (still bad) 2009-Jan-11 18:41:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:41:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:41:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-11 18:41:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81669.00 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.170 (still bad) 2009-Jan-11 18:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Jan-11 18:41:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Jan-11 18:41:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:41:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.915 0.940 1.117 2009-Jan-11 18:41:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.983 1.140 1.119 2009-Jan-11 18:41:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.926 1.146 1.101 1.003 2009-Jan-11 18:41:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.106 1.094 0.116 2009-Jan-11 18:41:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Jan-11 18:41:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:41:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:41:19 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-11 18:41:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:41:19 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-11 18:41:19 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-11 18:41:19 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:41:19 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-11 18:41:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:41:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:41:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:41:19 LOG2 antvel: Parameters to Doppler: Topocentric 81679 2009 11 0.0 2009-Jan-11 18:41:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:41:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-11 18:41:19 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-11 18:41:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:41:19 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:41:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:41:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-11 18:41:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:41:19 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-11 18:41:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:41:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.676151 2009.0322483015184 18.999933 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333333 8.273333333333337 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 1 1.384901807781325 8.376886161452363 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 2 1.378838988233115 8.338154607620455 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 3 1.377235426863866 8.234702069857077 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 4 1.381787129894449 8.169680124702591 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 5 1.387877479148880 8.208925698393919 2009-Jan-11 18:41:19 LOG4 log_alfabeam: ALFABEAM 6 1.389388527583194 8.312674895691046 2009-Jan-11 18:41:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100180 2009-Jan-11 18:41:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:41:20 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-11 18:41:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:41:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:41:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Jan-11 18:41:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-11 18:41:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81681.00 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Jan-11 18:41:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.143 (still bad) 2009-Jan-11 18:41:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Jan-11 18:41:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Jan-11 18:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Jan-11 18:41:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:41:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:41:31 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-11 18:41:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:41:31 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-11 18:41:31 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-11 18:41:31 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:41:31 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-11 18:41:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:41:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:41:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:41:31 LOG2 antvel: Parameters to Doppler: Topocentric 81691 2009 11 0.0 2009-Jan-11 18:41:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:41:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-11 18:41:31 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-11 18:41:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:41:31 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:41:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:41:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-11 18:41:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:41:31 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-11 18:41:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:41:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.679494 2009.0322486817756 18.999933 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333343 8.273333333333333 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 1 1.384930039355172 8.376791098288566 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 2 1.378856668601269 8.338423924792524 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 3 1.377224972234030 8.235068364558174 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 4 1.381758847446725 8.169774026112218 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 5 1.387859823319005 8.208652639530845 2009-Jan-11 18:41:31 LOG4 log_alfabeam: ALFABEAM 6 1.389399249898580 8.312309869843968 2009-Jan-11 18:41:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100181 2009-Jan-11 18:41:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:41:32 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-11 18:41:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:41:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:41:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-11 18:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Jan-11 18:41:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81693.00 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Jan-11 18:41:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Jan-11 18:41:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Jan-11 18:41:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:41:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Jan-11 18:41:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Jan-11 18:41:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:41:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:41:43 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-11 18:41:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:41:43 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-11 18:41:43 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-11 18:41:43 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:41:43 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-11 18:41:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:41:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:41:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:41:43 LOG2 antvel: Parameters to Doppler: Topocentric 81703 2009 11 0.0 2009-Jan-11 18:41:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:41:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-11 18:41:43 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-11 18:41:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:41:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:41:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:41:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-11 18:41:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:41:43 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-11 18:41:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:41:43 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.682836 2009.0322490620326 18.999933 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333340 8.273333333333332 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 1 1.384958136659007 8.376694714156391 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 2 1.378874353697062 8.338691151034043 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 3 1.377214657259636 8.235433870341700 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 4 1.381730698779417 8.169869260036233 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 5 1.387842160615882 8.208381682523715 2009-Jan-11 18:41:43 LOG4 log_alfabeam: ALFABEAM 6 1.389409832232832 8.311945594476509 2009-Jan-11 18:41:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100182 2009-Jan-11 18:41:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:41:44 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-11 18:41:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:41:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:41:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-11 18:41:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81705.00 2009-Jan-11 18:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Jan-11 18:41:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Jan-11 18:41:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Jan-11 18:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Jan-11 18:41:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Jan-11 18:41:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:41:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:41:55 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-11 18:41:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:41:55 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-11 18:41:55 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-11 18:41:55 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:41:55 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-11 18:41:55 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:41:55 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:41:55 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:41:55 LOG2 antvel: Parameters to Doppler: Topocentric 81715 2009 11 0.0 2009-Jan-11 18:41:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:41:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-11 18:41:55 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-11 18:41:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:41:55 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:41:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:41:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-11 18:41:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:41:55 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-11 18:41:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:41:55 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.686179 2009.0322494422896 18.999933 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333331 8.273333333333333 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 1 1.384986115874865 8.376596972456475 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 2 1.378892052758646 8.338956448955045 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 3 1.377204475036317 8.235798787512044 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 4 1.381702667691165 8.169965862409228 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 5 1.387824481833954 8.208112662877731 2009-Jan-11 18:41:55 LOG4 log_alfabeam: ALFABEAM 6 1.389420281620741 8.311581870262101 2009-Jan-11 18:41:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100183 2009-Jan-11 18:41:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:41:56 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-11 18:41:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:41:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:41:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:41:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81717.00 2009-Jan-11 18:41:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-11 18:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:41:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Jan-11 18:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Jan-11 18:42:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Jan-11 18:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:42:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:42:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:42:07 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-11 18:42:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:42:07 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-11 18:42:07 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-11 18:42:07 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:42:07 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-11 18:42:07 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:42:07 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:42:07 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:42:07 LOG2 antvel: Parameters to Doppler: Topocentric 81727 2009 11 0.0 2009-Jan-11 18:42:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:42:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-11 18:42:07 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-11 18:42:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:42:07 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:42:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:42:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-11 18:42:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:42:07 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-11 18:42:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:42:07 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.689521 2009.0322498225466 18.999933 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333334 8.273333333333333 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 1 1.385013959658846 8.376497952715418 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 2 1.378909753866092 8.339219662819353 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 3 1.377194430910867 8.236162879649001 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 4 1.381674771568223 8.170063754406907 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 5 1.387806798900377 8.207845738896152 2009-Jan-11 18:42:07 LOG4 log_alfabeam: ALFABEAM 6 1.389430592526555 8.311218933154342 2009-Jan-11 18:42:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100184 2009-Jan-11 18:42:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:42:08 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-11 18:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Jan-11 18:42:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:42:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:42:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-11 18:42:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81729.00 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:42:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Jan-11 18:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Jan-11 18:42:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:42:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.889 0.906 1.094 2009-Jan-11 18:42:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.968 1.089 1.097 2009-Jan-11 18:42:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 1.123 1.037 0.973 2009-Jan-11 18:42:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.106 1.077 0.116 2009-Jan-11 18:42:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:42:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:42:19 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-11 18:42:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:42:19 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-11 18:42:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-11 18:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-11 18:42:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-11 18:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:42:19 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-11 18:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-11 18:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:42:19 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-11 18:42:19 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-11 18:42:19 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:42:19 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-11 18:42:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:42:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:42:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:42:19 LOG2 antvel: Parameters to Doppler: Topocentric 81739 2009 11 0.0 2009-Jan-11 18:42:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:42:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-11 18:42:19 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-11 18:42:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:42:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:42:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:42:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-11 18:42:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:42:19 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-11 18:42:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:42:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.692864 2009.0322502028039 18.999933 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333338 8.273333333333325 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 1 1.385041684096066 8.376397616706843 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 2 1.378927466294752 8.339480953417183 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 3 1.377184518114061 8.236526346851914 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 4 1.381646994305507 8.170162973598417 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 5 1.387789102570367 8.207580747901941 2009-Jan-11 18:42:19 LOG4 log_alfabeam: ALFABEAM 6 1.389440771850555 8.310856583997776 2009-Jan-11 18:42:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100185 2009-Jan-11 18:42:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:42:20 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-11 18:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:42:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-11 18:42:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-11 18:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81741.00 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Jan-11 18:42:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.601 (still bad) 2009-Jan-11 18:42:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.604 (still bad) 2009-Jan-11 18:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Jan-11 18:42:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Jan-11 18:42:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:42:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:42:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:42:31 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-11 18:42:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:42:31 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-11 18:42:31 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-11 18:42:31 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:42:31 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-11 18:42:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:42:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:42:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:42:31 LOG2 antvel: Parameters to Doppler: Topocentric 81751 2009 11 0.0 2009-Jan-11 18:42:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:42:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-11 18:42:31 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-11 18:42:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:42:31 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:42:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:42:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-11 18:42:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:42:31 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-11 18:42:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:42:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.696206 2009.0322505830609 18.999933 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333340 8.273333333333341 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 1 1.385069272049347 8.376296045447024 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 2 1.378945178144754 8.339740167979581 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 3 1.377174741805488 8.236888954209846 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 4 1.381619353083049 8.170263439650419 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 5 1.387771404753987 8.207317845203876 2009-Jan-11 18:42:31 LOG4 log_alfabeam: ALFABEAM 6 1.389450814245527 8.310495057292291 2009-Jan-11 18:42:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100186 2009-Jan-11 18:42:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:42:32 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-11 18:42:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-11 18:42:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:42:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-11 18:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.605 (still bad) 2009-Jan-11 18:42:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81753.00 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Jan-11 18:42:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Jan-11 18:42:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Jan-11 18:42:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.593 (still bad) 2009-Jan-11 18:42:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Jan-11 18:42:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:42:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:42:43 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-11 18:42:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:42:43 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-11 18:42:43 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-11 18:42:43 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:42:43 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-11 18:42:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:42:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:42:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:42:43 LOG2 antvel: Parameters to Doppler: Topocentric 81763 2009 11 0.0 2009-Jan-11 18:42:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:42:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-11 18:42:43 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-11 18:42:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:42:43 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:42:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:42:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-11 18:42:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:42:43 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-11 18:42:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:42:43 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.699549 2009.0322509633179 18.999933 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333336 8.273333333333325 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 1 1.385096739504436 8.376193199107879 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 2 1.378962898726227 8.339997465462018 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 3 1.377165095350993 8.237250901576468 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 4 1.381591831894403 8.170365191741453 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 5 1.387753696169527 8.207056869958235 2009-Jan-11 18:42:43 LOG4 log_alfabeam: ALFABEAM 6 1.389460726477166 8.310134154093914 2009-Jan-11 18:42:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100187 2009-Jan-11 18:42:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:42:44 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-11 18:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:42:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-11 18:42:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-11 18:42:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81765.00 2009-Jan-11 18:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.598 (still bad) 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.586 (still bad) 2009-Jan-11 18:42:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.587 (still bad) 2009-Jan-11 18:42:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:42:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.588 (still bad) 2009-Jan-11 18:42:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.585 (still bad) 2009-Jan-11 18:42:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.586 (still bad) 2009-Jan-11 18:42:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:42:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:42:55 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-11 18:42:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:42:55 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-11 18:42:55 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-11 18:42:55 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:42:55 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-11 18:42:55 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:42:55 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:42:55 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:42:55 LOG2 antvel: Parameters to Doppler: Topocentric 81775 2009 11 0.0 2009-Jan-11 18:42:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:42:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-11 18:42:55 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-11 18:42:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:42:55 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:42:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:42:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-11 18:42:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:42:55 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-11 18:42:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:42:55 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.702891 2009.0322513435749 18.999933 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333333 8.273333333333337 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 1 1.385124069531145 8.376089160120795 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 2 1.378980616163198 8.340252696031593 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 3 1.377155583726623 8.237611955593314 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 4 1.381564447713096 8.170468148103948 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 5 1.387735988706071 8.206797974509819 2009-Jan-11 18:42:55 LOG4 log_alfabeam: ALFABEAM 6 1.389470503383281 8.309774107404257 2009-Jan-11 18:42:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100188 2009-Jan-11 18:42:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:42:56 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-11 18:42:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:42:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-11 18:42:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:42:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-11 18:42:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81777.00 2009-Jan-11 18:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.587 (still bad) 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:42:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Jan-11 18:42:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:42:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.578 (still bad) 2009-Jan-11 18:43:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.578 (still bad) 2009-Jan-11 18:43:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Jan-11 18:43:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:43:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.577 (still bad) 2009-Jan-11 18:43:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:43:07 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-11 18:43:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:43:07 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-11 18:43:07 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-11 18:43:07 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:43:07 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-11 18:43:07 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:43:07 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:43:07 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:43:07 LOG2 antvel: Parameters to Doppler: Topocentric 81787 2009 11 0.0 2009-Jan-11 18:43:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:43:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-11 18:43:07 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-11 18:43:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:43:07 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:43:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:43:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-11 18:43:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:43:07 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-11 18:43:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:43:07 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.706234 2009.0322517238319 18.999933 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333339 8.273333333333335 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 1 1.385151278013583 8.375983887082306 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 2 1.378998339798264 8.340506016795395 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 3 1.377146200433289 8.237972315828053 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 4 1.381537184633697 8.170572349499736 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 5 1.387718273047411 8.206540999862666 2009-Jan-11 18:43:07 LOG4 log_alfabeam: ALFABEAM 6 1.389480151595002 8.309414718531016 2009-Jan-11 18:43:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100189 2009-Jan-11 18:43:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:43:08 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-11 18:43:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:43:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-11 18:43:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-11 18:43:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81789.00 2009-Jan-11 18:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.579 (still bad) 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Jan-11 18:43:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Jan-11 18:43:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Jan-11 18:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Jan-11 18:43:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:43:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:43:19 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-11 18:43:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:43:19 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-11 18:43:19 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-11 18:43:19 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:43:19 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-11 18:43:19 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:43:19 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:43:19 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:43:19 LOG2 antvel: Parameters to Doppler: Topocentric 81799 2009 11 0.0 2009-Jan-11 18:43:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:43:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-11 18:43:19 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-11 18:43:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:43:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:43:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:43:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-11 18:43:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:43:19 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-11 18:43:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:43:19 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.709576 2009.0322521040891 18.999933 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333337 8.273333333333335 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 1 1.385178348228579 8.375877463765498 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 2 1.379016057782993 8.340757280823796 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 3 1.377136950267128 8.238331750514966 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 4 1.381510059423072 8.170677712800426 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 5 1.387700561057792 8.206286095429469 2009-Jan-11 18:43:19 LOG4 log_alfabeam: ALFABEAM 6 1.389489666131511 8.309056218935764 2009-Jan-11 18:43:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100190 2009-Jan-11 18:43:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:43:20 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-11 18:43:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:43:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.240 1.209 1.228 1.475 2009-Jan-11 18:43:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.333 1.521 1.507 2009-Jan-11 18:43:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.249 1.564 1.458 1.301 2009-Jan-11 18:43:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.354 0.106 1.507 0.116 2009-Jan-11 18:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:43:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-11 18:43:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-11 18:43:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81801.00 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.570 (still bad) 2009-Jan-11 18:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.562 (still bad) 2009-Jan-11 18:43:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Jan-11 18:43:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.564 (still bad) 2009-Jan-11 18:43:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.563 (still bad) 2009-Jan-11 18:43:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:43:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:43:31 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-11 18:43:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:43:31 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-11 18:43:31 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-11 18:43:31 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:43:31 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-11 18:43:31 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:43:31 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:43:31 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:43:31 LOG2 antvel: Parameters to Doppler: Topocentric 81811 2009 11 0.0 2009-Jan-11 18:43:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:43:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-11 18:43:31 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-11 18:43:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:43:31 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:43:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:43:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-11 18:43:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-11 18:43:31 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-11 18:43:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:43:31 LOG5 log_alfabeam: Parameters: 1.3833333333333333 8.2733333333333334 1.712918 2009.0322524843461 18.999933 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 0 1.383333333333336 8.273333333333337 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 1 1.385205287914941 8.375769879582014 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 2 1.379033774189254 8.341006569065728 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 3 1.377127829573766 8.238690351720710 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 4 1.381483064337107 8.170784248273078 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 5 1.387682848688754 8.206033179456295 2009-Jan-11 18:43:31 LOG4 log_alfabeam: ALFABEAM 6 1.389499050700798 8.308698517129063 2009-Jan-11 18:43:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 901100191 2009-Jan-11 18:43:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-11 18:43:32 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-11 18:43:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:43:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-11 18:43:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Jan-11 18:43:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-11 18:43:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81813.00 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Jan-11 18:43:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.563 (still bad) 2009-Jan-11 18:43:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.562 (still bad) 2009-Jan-11 18:43:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:43:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.561 (still bad) 2009-Jan-11 18:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.561 (still bad) 2009-Jan-11 18:43:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:43:43 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Jan-11 18:43:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-11 18:43:43 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-11 18:43:43 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 INFO2 smartfreq: Switching off CAL 2009-Jan-11 18:43:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:43:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:43:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:43:43 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:43:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:43:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:43:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:43:43 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 INFO3 restore_frequencies: Restoring original frequencies 2009-Jan-11 18:43:43 LOG5 antvel: Calling 'antvel 12300.000000 81624.000000 J Topocentric 0' 2009-Jan-11 18:43:43 LOG2 antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:43:43 LOG2 antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:43:43 LOG2 antvel: Parameters to Doppler: Topocentric 81823 2009 11 0.0 2009-Jan-11 18:43:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:43:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-11 18:43:43 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-11 18:43:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:43:43 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:43:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:43:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:43 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jan-11 18:43:43 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jan-11 18:43:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:43:43 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jan-11 18:43:43 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-11 18:43:43 NOTE run_command_file: DONE with command file processing 2009-Jan-11 18:43:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jan-11 18:43:44 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-11 18:43:44 LOG5 finish_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-11 18:43:44 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Jan-11 18:43:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:43:44 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Jan-11 18:43:44 LOG5 end_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-11 18:43:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:43:44 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:43:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.563 (still bad) 2009-Jan-11 18:43:52 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-11 18:43:52 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-11 18:43:52 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-11 18:43:52 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-11 18:43:52 LOG5 begin_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-11 18:43:52 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-11 18:43:52 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-11 18:43:52 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-11 18:43:52 LOG5 end_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-11 18:43:52 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-11 18:43:53 LOG3 exec_msg: Closing socket 2009-Jan-11 18:43:53 LOG3 exec_msg: Closing socket 2009-Jan-11 18:43:53 LOG3 exec_msg: Closing socket 2009-Jan-11 18:43:53 LOG3 exec_msg: Closing socket 2009-Jan-11 18:43:56 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-11 18:43:56 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-11 18:43:56 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-11 18:43:56 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-11 18:44:08 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Jan-11 18:44:09 LOG2 CIMA-antvel: Precessing RA = 01:23:00.0 Dec = +08:16:24.0 Epoch = 2009.03225 J 2009-Jan-11 18:44:09 LOG2 CIMA-antvel: Computed apparent RA = 01:23:29.2 Dec = +08:19:20.4 2009-Jan-11 18:44:09 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 81848 2009 11 0.0 2009-Jan-11 18:44:09 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-11 18:44:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:44:10 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jan-11 18:44:10 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jan-11 18:44:10 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-11 18:44:10 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-11 18:44:10 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-11 18:44:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-11 18:44:11 LOG1 config_iflo: Receiver ALFA already selected 2009-Jan-11 18:44:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:44:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:44:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:44:11 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:44:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:44:11 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:44:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:44:11 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jan-11 18:44:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jan-11 18:44:11 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-11 18:44:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jan-11 18:44:11 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jan-11 18:44:11 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jan-11 18:44:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-11 18:44:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:44:11 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-11 18:44:11 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jan-11 18:44:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-11 18:44:11 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-11 18:44:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-11 18:44:11 LOG5 finish_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-11 18:44:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:44:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-11 18:44:11 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-11 18:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-11 18:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-11 18:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-11 18:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-11 18:44:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-11 18:44:12 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jan-11 18:44:12 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jan-11 18:44:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-11 18:44:12 LOG5 begin_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-11 18:44:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-11 18:44:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-11 18:44:12 START begin_task: Starting task 'selecting calibration port' 2009-Jan-11 18:44:12 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-11 18:44:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-11 18:44:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:44:12 START begin_task: Starting task 'waiting on calport' 2009-Jan-11 18:44:12 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Jan-11 18:44:12 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-11 18:44:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:44:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-11 18:44:12 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-11 18:44:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-11 18:44:12 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:44:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:44:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:44:12 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:44:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:44:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:44:12 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-11 18:44:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-11 18:44:13 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-11 18:44:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:44:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:44:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:44:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:44:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-11 18:44:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-11 18:44:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:44:13 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-11 18:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-11 18:44:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:44:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:44:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:44:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:44:13 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jan-11 18:44:13 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-11 18:44:13 LOG5 finish_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-11 18:44:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:44:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-11 18:44:13 LOG5 end_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-11 18:44:13 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Jan-11 18:44:13 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Jan-11 18:44:13 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:44:13 LOG5 begin_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-11 18:44:13 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-11 18:44:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-11 18:44:13 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:44:13 LOG5 finish_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-11 18:44:13 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-11 18:44:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:44:13 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-11 18:44:13 LOG5 end_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-11 18:44:14 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Jan-11 18:44:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-11 18:44:14 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-11 18:44:29 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-11 18:44:29 LOG4 exec_msg: From OBSERVER: track_new_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-11 18:44:29 LOG1 track_new_source: Calling 'track_new_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-11 18:44:29 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-11 18:44:29 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-11 18:44:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Selecting source 'drift34p2' ...} 2009-Jan-11 18:44:29 LOG3 track_source: Calling 'track_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:44:29 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:44:29 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-11 18:44:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:44:29 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: set ra 012900.0 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: pnt tr 012900.0 +081624 -CJ 2009-Jan-11 18:44:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:44:29 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:44:29 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-11 18:44:29 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:44:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:44:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:44:29 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-11 18:44:30 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-11 18:44:30 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-11 18:44:30 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:44:30 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-11 18:44:30 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-11 18:44:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:44:30 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-11 18:44:30 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-11 18:44:30 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 DONE finish_task: DONE finished selecting: new source 2009-Jan-11 18:44:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:44:30 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-11 18:44:30 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: set ra 012900.0 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 012900.0 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: pnt tr 012900.0 +081624 -CJ 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:40 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-11 18:44:40 LOG4 exec_msg: From OBSERVER: track_new_source drift34p2 014500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-11 18:44:40 LOG1 track_new_source: Calling 'track_new_source drift34p2 014500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-11 18:44:40 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-11 18:44:40 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-11 18:44:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Selecting source 'drift34p2' ...} 2009-Jan-11 18:44:40 LOG3 track_source: Calling 'track_source drift34p2 014500.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:44:40 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:44:40 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-11 18:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:44:40 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:44:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:44:40 LOG3 vw_send: To DATATAKING: set ra 014500.0 2009-Jan-11 18:44:40 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:44:40 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:44:40 LOG3 vw_send: To DATATAKING: pnt tr 014500.0 +081624 -CJ 2009-Jan-11 18:44:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:44:41 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:44:41 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:44:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:44:41 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-11 18:44:41 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-11 18:44:41 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-11 18:44:41 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:44:41 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-11 18:44:41 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-11 18:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:44:41 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-11 18:44:41 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-11 18:44:41 LOG5 finish_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 DONE finish_task: DONE finished selecting: new source 2009-Jan-11 18:44:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:44:41 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-11 18:44:41 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: set ra 014500.0 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% 014500.0 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: pnt tr 014500.0 +081624 -CJ 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:45:35 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Jan-11 18:45:35 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Jan-11 18:45:35 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:45:35 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-11 18:45:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-11 18:45:36 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-11 18:45:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-11 18:45:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-11 18:45:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:45:36 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-11 18:45:36 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-11 18:45:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-11 18:45:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:45:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:45:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-11 18:45:39 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-11 18:45:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-11 18:45:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:45:39 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-11 18:45:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-11 18:45:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:45:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:45:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:45:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:45:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-11 18:45:39 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-11 18:45:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-11 18:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:45:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 5 dB 2009-Jan-11 18:45:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-11 18:45:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-11 18:45:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-11 18:45:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-11 18:45:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-11 18:45:39 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-11 18:45:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.884 0.902 ALFA beam 1: 0.911 1.097 2009-Jan-11 18:45:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.008 0.974 ALFA beam 3: 1.083 1.081 2009-Jan-11 18:45:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.098 1.099 ALFA beam 5: 1.049 0.981 2009-Jan-11 18:45:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.947 0.103 ALFA beam 7: 1.062 0.113 2009-Jan-11 18:45:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:45:39 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-11 18:45:39 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Jan-11 18:45:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:45:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:45:39 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-11 18:45:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Jan-11 18:45:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:45:40 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-11 18:45:40 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-11 18:45:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:45:40 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:45:40 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-11 18:45:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jan-11 18:45:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.884 0.902 0.911 1.097 2009-Jan-11 18:45:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.974 1.083 1.081 2009-Jan-11 18:45:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 1.099 1.049 0.981 2009-Jan-11 18:45:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.103 1.062 0.113 2009-Jan-11 18:45:43 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Jan-11 18:45:43 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 galfasrc 070900.0 +023318 J 0 Topocentric velocity(optical) 2009-Jan-11 18:45:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 galfasrc 070900.0 +023318 J 0 Topocentric velocity(optical)' 2009-Jan-11 18:45:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jan-11 18:45:43 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-11 18:45:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift34p2' 2009-Jan-11 18:45:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jan-11 18:45:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {galfasrc} 2009-Jan-11 18:45:43 INFO5 fixed_driftmap: Start: year = 2009.0322566671737 RA = 07:09:30.5 Dec = +02:32:24.7 2009-Jan-11 18:45:43 NOTE fixed_driftmap: Setting ZA to 15:48:49.0 ... 2009-Jan-11 18:45:43 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 15.81 2009-Jan-11 18:45:43 LOG3 track_source: Calling 'track_source galfasrc 360.0 15.8136199678 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Jan-11 18:45:43 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:45:43 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-11 18:45:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jan-11 18:45:43 INFO1 track_source: Starting to track galfasrc 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: set dec 15.8136199678 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: pnt tr 360.0 15.8136199678 -CF 2009-Jan-11 18:45:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:45:43 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:45:43 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-11 18:45:43 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:45:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:45:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:45:43 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-11 18:45:43 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:45:43 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-11 18:45:44 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-11 18:45:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Jan-11 18:45:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-11 18:45:44 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-11 18:45:44 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: set dec 15.8136199678 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% 15.8136199678 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 15.8136199678 -CF 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:45:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-11 18:45:44 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-11 18:45:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-11 18:45:44 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:45:44 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:45:44 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-11 18:45:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:45:44 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-11 18:45:44 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 START begin_task: Starting task 'waiting on telescope' 2009-Jan-11 18:45:44 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-11 18:45:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-11 18:45:44 LOG3 waittrk: Start waittrk 5 2009-Jan-11 18:45:44 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-11 18:45:44 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-11 18:45:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-11 18:45:50 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-11 18:45:50 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-11 18:45:50 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-11 18:48:12 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:48:12 INFO2 waittrk: Now tracking galfasrc 2009-Jan-11 18:48:12 LOG4 waittrk: Current telescope position: Az = 359.66 ZA = 15.79 2009-Jan-11 18:48:12 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-11 18:48:12 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jan-11 18:48:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:48:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-11 18:48:12 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 START begin_task: Starting task 'selecting calibration type' 2009-Jan-11 18:48:12 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-11 18:48:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-11 18:48:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:48:12 START begin_task: Starting task 'waiting on setcal' 2009-Jan-11 18:48:12 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-11 18:48:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:48:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-11 18:48:12 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-11 18:48:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:48:12 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-11 18:48:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:48:12 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-11 18:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:48:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:48:14 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:48:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-11 18:48:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:48:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:48:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:48:14 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:48:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:48:14 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:48:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:48:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-11 18:48:14 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Jan-11 18:48:14 INFO3 dopset_later: Setting Doppler correction now 2009-Jan-11 18:48:14 LOG5 antvel: Calling 'antvel 360.000000 15.813620 F Topocentric 0' 2009-Jan-11 18:48:14 LOG2 antvel: Transforming current Az = 360.00 ZA = 15.81 to apparent RA = 01:47:29.3 Dec = +02:32:24.7 2009-Jan-11 18:48:14 LOG2 antvel: Parameters to Doppler: Topocentric 82093 2009 11 0.0 2009-Jan-11 18:48:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:48:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-11 18:48:14 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-11 18:48:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:48:14 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:48:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:48:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:48:14 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:48:14 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-11 18:48:14 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-11 18:48:14 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-11 18:48:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-11 18:48:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:48:14 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-11 18:48:14 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:48:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-11 18:48:17 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-11 18:48:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-11 18:48:17 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:48:17 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-11 18:48:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-11 18:48:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:48:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:48:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:48:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:48:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-11 18:48:17 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-11 18:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:48:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-11 18:48:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2009-Jan-11 18:48:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-Jan-11 18:48:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Jan-11 18:48:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-11 18:48:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-11 18:48:18 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-11 18:48:18 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.932 0.929 ALFA beam 1: 0.969 0.905 2009-Jan-11 18:48:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.052 1.016 ALFA beam 3: 0.890 0.931 2009-Jan-11 18:48:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.947 0.942 ALFA beam 5: 1.101 1.026 2009-Jan-11 18:48:18 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.005 0.106 ALFA beam 7: 1.119 0.116 2009-Jan-11 18:48:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:48:18 LOG5 finish_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:48:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:48:18 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-11 18:48:18 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:48:18 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:48:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:48:18 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 07:09:30.5 LST = 01:47:33.3 diff = 19317.3 secs 2009-Jan-11 18:48:18 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2009-Jan-11 18:48:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:48:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:48:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:48:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:48:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-11 18:48:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-11 18:48:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-11 18:48:18 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-11 18:48:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-11 18:48:18 INFO2 take_data: Starting WAPP 600-second scan: 901100192 2009-Jan-11 18:48:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-11 18:48:18 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-11 18:48:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:48:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:48:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-11 18:48:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82099.00 2009-Jan-11 18:48:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20090111.a2010.0042.fits 2009-Jan-11 18:48:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090111.a2010.0042.fits} 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:48:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:48:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.938 0.976 0.913 2009-Jan-11 18:48:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.057 1.022 0.913 0.935 2009-Jan-11 18:48:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.949 1.109 1.032 2009-Jan-11 18:48:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.106 1.125 0.116 2009-Jan-11 18:48:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:48:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:48:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Jan-11 18:48:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:48:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:48:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:48:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:48:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:48:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:48:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:48:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:48:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:48:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:48:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:48:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Jan-11 18:48:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:48:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Jan-11 18:49:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Jan-11 18:49:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:49:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:49:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.934 0.971 0.901 2009-Jan-11 18:49:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 1.023 0.911 0.935 2009-Jan-11 18:49:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.943 1.105 1.024 2009-Jan-11 18:49:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.106 1.120 0.116 2009-Jan-11 18:49:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:49:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:49:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:49:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:49:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:49:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:49:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:49:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:49:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Jan-11 18:50:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:50:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:50:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:50:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:50:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:50:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:50:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:50:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:50:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:50:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:50:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.939 0.974 0.911 2009-Jan-11 18:50:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 1.015 0.908 0.930 2009-Jan-11 18:50:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.943 1.108 1.024 2009-Jan-11 18:50:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.106 1.122 0.117 2009-Jan-11 18:50:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:50:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Jan-11 18:50:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Jan-11 18:50:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:50:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:50:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Jan-11 18:50:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Jan-11 18:50:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Jan-11 18:50:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Jan-11 18:50:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Jan-11 18:50:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Jan-11 18:50:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Jan-11 18:50:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:50:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:50:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:51:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:51:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:51:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:51:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Jan-11 18:51:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:51:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Jan-11 18:51:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Jan-11 18:51:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Jan-11 18:51:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Jan-11 18:51:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:51:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:51:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Jan-11 18:51:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.936 0.972 0.916 2009-Jan-11 18:51:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.029 0.909 0.930 2009-Jan-11 18:51:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.942 1.108 1.024 2009-Jan-11 18:51:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.107 1.118 0.117 2009-Jan-11 18:51:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Jan-11 18:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Jan-11 18:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:51:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:51:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:51:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Jan-11 18:51:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:51:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:51:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Jan-11 18:51:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:51:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:51:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:51:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Jan-11 18:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Jan-11 18:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:52:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Jan-11 18:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Jan-11 18:52:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Jan-11 18:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:52:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Jan-11 18:52:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:52:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Jan-11 18:52:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:52:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.937 0.976 0.916 2009-Jan-11 18:52:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.054 1.016 0.911 0.933 2009-Jan-11 18:52:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.944 1.101 1.022 2009-Jan-11 18:52:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.106 1.118 0.116 2009-Jan-11 18:52:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:52:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:52:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:52:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:52:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Jan-11 18:52:34 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Jan-11 18:52:34 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Jan-11 18:52:34 WARNING abort_task: WARNING abort requested! 2009-Jan-11 18:52:34 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2009-Jan-11 18:52:34 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2009-Jan-11 18:52:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2009-Jan-11 18:52:34 LOG5 end_task: Level: (3) ID = <10129> Status = 1 0 0 0 abort 2009-Jan-11 18:52:34 LOG4 stop_backends: Calling 'stop_backends' 2009-Jan-11 18:52:34 START begin_task: Starting task 'stopping the WAPPs' 2009-Jan-11 18:52:34 LOG5 begin_task: Level: (3) ID = <10130> Status = 1 0 0 0 abort 2009-Jan-11 18:52:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Jan-11 18:52:34 INFO1 stop_wapp: Stopping the WAPPs 2009-Jan-11 18:52:34 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Jan-11 18:52:34 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Jan-11 18:52:34 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Jan-11 18:52:34 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Jan-11 18:52:34 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Jan-11 18:52:34 LOG5 begin_task: Level: (4) ID = <10131> Status = 1 0 0 0 abort 2009-Jan-11 18:52:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Jan-11 18:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:35 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2009-Jan-11 18:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:52:36 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2009-Jan-11 18:52:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-11 18:52:36 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2009-Jan-11 18:52:36 LOG5 end_task: Level: (4) ID = <10131> Status = 1 0 0 0 abort 2009-Jan-11 18:52:36 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2009-Jan-11 18:52:36 LOG5 end_task: Level: (3) ID = <10130> Status = 1 0 0 0 abort 2009-Jan-11 18:52:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2009-Jan-11 18:52:36 LOG5 end_task: Level: (2) ID = <10128> Status = 1 0 0 0 abort 2009-Jan-11 18:52:36 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jan-11 18:52:36 LOG5 finish_task: Level: (1) ID = <10113> Status = 1 0 0 0 abort 2009-Jan-11 18:52:36 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jan-11 18:52:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jan-11 18:52:36 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jan-11 18:52:36 LOG5 end_task: Level: (1) ID = <10113> Status = 1 0 0 0 abort 2009-Jan-11 18:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:52:44 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-11 18:52:44 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-11 18:52:44 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-11 18:52:44 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-11 18:52:44 LOG5 begin_task: Level: (1) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-11 18:52:44 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-11 18:52:44 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-11 18:52:44 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-11 18:52:44 LOG5 end_task: Level: (1) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-11 18:52:44 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-11 18:52:44 LOG3 exec_msg: Closing socket 2009-Jan-11 18:52:44 LOG3 exec_msg: Closing socket 2009-Jan-11 18:52:44 LOG3 exec_msg: Closing socket 2009-Jan-11 18:52:44 LOG3 exec_msg: Closing socket 2009-Jan-11 18:52:47 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-11 18:52:47 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-11 18:52:47 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-11 18:52:47 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-11 18:53:00 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Jan-11 18:53:01 LOG2 CIMA-antvel: Precessing RA = 01:45:00.0 Dec = +08:16:24.0 Epoch = 2009.03227 J 2009-Jan-11 18:53:01 LOG2 CIMA-antvel: Computed apparent RA = 01:45:29.5 Dec = +08:19:13.7 2009-Jan-11 18:53:01 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 82380 2009 11 0.0 2009-Jan-11 18:53:01 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-11 18:53:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:53:02 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jan-11 18:53:02 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jan-11 18:53:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-11 18:53:02 LOG5 begin_task: Level: (1) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-11 18:53:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-11 18:53:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-11 18:53:02 LOG1 config_iflo: Receiver ALFA already selected 2009-Jan-11 18:53:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:53:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:53:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:53:02 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:53:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:53:03 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:53:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:53:03 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jan-11 18:53:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jan-11 18:53:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-11 18:53:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jan-11 18:53:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jan-11 18:53:03 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jan-11 18:53:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-11 18:53:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-11 18:53:03 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jan-11 18:53:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-11 18:53:03 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-11 18:53:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-11 18:53:03 LOG5 finish_task: Level: (1) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-11 18:53:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-11 18:53:03 LOG5 end_task: Level: (1) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-11 18:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-11 18:53:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-11 18:53:04 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jan-11 18:53:04 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jan-11 18:53:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-11 18:53:04 LOG5 begin_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-11 18:53:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-11 18:53:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-11 18:53:04 START begin_task: Starting task 'selecting calibration port' 2009-Jan-11 18:53:04 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-11 18:53:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-11 18:53:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:04 START begin_task: Starting task 'waiting on calport' 2009-Jan-11 18:53:04 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Jan-11 18:53:04 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-11 18:53:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:53:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-11 18:53:04 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-11 18:53:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-11 18:53:04 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-11 18:53:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-11 18:53:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:53:04 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:53:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:53:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:53:04 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:53:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:53:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-11 18:53:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-11 18:53:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-11 18:53:05 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-11 18:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-11 18:53:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-11 18:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:53:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-11 18:53:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-11 18:53:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-11 18:53:05 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jan-11 18:53:05 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-11 18:53:05 LOG5 finish_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-11 18:53:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:05 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-11 18:53:05 LOG5 end_task: Level: (1) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-11 18:53:05 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Jan-11 18:53:05 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Jan-11 18:53:05 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:53:05 LOG5 begin_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-11 18:53:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-11 18:53:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-11 18:53:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:53:05 LOG5 finish_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-11 18:53:05 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-11 18:53:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:05 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-11 18:53:05 LOG5 end_task: Level: (1) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-11 18:53:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-11 18:53:06 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-11 18:53:06 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Jan-11 18:53:14 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-11 18:53:14 LOG4 exec_msg: From OBSERVER: track_new_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-11 18:53:14 LOG1 track_new_source: Calling 'track_new_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-11 18:53:14 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-11 18:53:14 LOG5 begin_task: Level: (1) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-11 18:53:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Selecting source 'drift34p2' ...} 2009-Jan-11 18:53:14 LOG3 track_source: Calling 'track_source drift34p2 012900.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:53:14 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:53:14 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-11 18:53:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:53:14 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: set ra 012900.0 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: pnt tr 012900.0 +081624 -CJ 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:53:14 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:53:14 LOG5 finish_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-11 18:53:14 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:53:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:53:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:53:14 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-11 18:53:14 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-11 18:53:14 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-11 18:53:14 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-11 18:53:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-11 18:53:14 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:53:15 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-11 18:53:15 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-11 18:53:15 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-11 18:53:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:53:15 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-11 18:53:15 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-11 18:53:15 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-11 18:53:15 LOG5 finish_task: Level: (1) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-11 18:53:15 DONE finish_task: DONE finished selecting: new source 2009-Jan-11 18:53:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:15 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-11 18:53:15 LOG5 end_task: Level: (1) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: set ra 012900.0 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% 012900.0 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: pnt tr 012900.0 +081624 -CJ 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:24 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-11 18:53:24 LOG4 exec_msg: From OBSERVER: track_new_source drift34p2 015400.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-11 18:53:24 LOG1 track_new_source: Calling 'track_new_source drift34p2 015400.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-11 18:53:24 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-11 18:53:24 LOG5 begin_task: Level: (1) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Selecting source 'drift34p2' ...} 2009-Jan-11 18:53:24 LOG3 track_source: Calling 'track_source drift34p2 015400.0 +081624 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-11 18:53:24 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:53:24 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:53:24 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: set ra 015400.0 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: set dec +081624 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: pnt tr 015400.0 +081624 -CJ 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:53:24 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:53:24 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:53:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:53:24 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-11 18:53:24 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-11 18:53:24 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-11 18:53:24 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:53:24 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-11 18:53:24 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:53:24 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-11 18:53:24 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-11 18:53:24 LOG5 finish_task: Level: (1) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-11 18:53:24 DONE finish_task: DONE finished selecting: new source 2009-Jan-11 18:53:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:25 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-11 18:53:25 LOG5 end_task: Level: (1) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: set ra 015400.0 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: set dec +081624 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% 015400.0 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% +081624 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: pnt tr 015400.0 +081624 -CJ 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-11 18:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:53 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Jan-11 18:53:53 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Jan-11 18:53:53 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:53:53 LOG5 begin_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2009-Jan-11 18:53:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-11 18:53:53 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-11 18:53:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-11 18:53:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-11 18:53:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:53 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-11 18:53:53 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Jan-11 18:53:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-11 18:53:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:53:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-11 18:53:56 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Jan-11 18:53:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-11 18:53:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:53:56 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Jan-11 18:53:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-11 18:53:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:53:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:53:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:53:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:53:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-11 18:53:56 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Jan-11 18:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:53:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-11 18:53:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2009-Jan-11 18:53:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-Jan-11 18:53:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Jan-11 18:53:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-11 18:53:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-11 18:53:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-11 18:53:57 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Jan-11 18:53:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.903 0.924 ALFA beam 1: 0.954 0.911 2009-Jan-11 18:53:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.043 1.009 ALFA beam 3: 0.890 0.894 2009-Jan-11 18:53:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.901 0.899 ALFA beam 5: 1.077 1.003 2009-Jan-11 18:53:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.976 0.104 ALFA beam 7: 1.094 0.114 2009-Jan-11 18:53:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:53:57 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Jan-11 18:53:57 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Jan-11 18:53:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:53:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:53:57 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-Jan-11 18:53:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Jan-11 18:53:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:53:57 LOG5 finish_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2009-Jan-11 18:53:57 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-11 18:53:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-11 18:53:57 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:53:57 LOG5 end_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2009-Jan-11 18:53:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jan-11 18:53:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.924 0.954 0.911 2009-Jan-11 18:53:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.009 0.890 0.894 2009-Jan-11 18:53:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.899 1.077 1.003 2009-Jan-11 18:53:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.104 1.094 0.114 2009-Jan-11 18:54:02 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Jan-11 18:54:02 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift34p2 015400.0 +081624 J 0 Topocentric velocity(optical) 2009-Jan-11 18:54:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift34p2 015400.0 +081624 J 0 Topocentric velocity(optical)' 2009-Jan-11 18:54:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jan-11 18:54:02 LOG5 begin_task: Level: (1) ID = <10152> Status = 0 0 0 0 ok 2009-Jan-11 18:54:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift34p2' 2009-Jan-11 18:54:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jan-11 18:54:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift34p2} 2009-Jan-11 18:54:02 INFO5 fixed_driftmap: Start: year = 2009.0322724795294 RA = 01:54:29.7 Dec = +08:19:10.5 2009-Jan-11 18:54:02 NOTE fixed_driftmap: Setting ZA to 10:02:03.2 ... 2009-Jan-11 18:54:02 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 10.03 2009-Jan-11 18:54:02 LOG3 track_source: Calling 'track_source drift34p2 360.0 10.0342315512 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Jan-11 18:54:02 START begin_task: Starting task 'sending tracking commands' 2009-Jan-11 18:54:02 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Jan-11 18:54:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift34p2} INFO {Slewing to source 'drift34p2' ...} 2009-Jan-11 18:54:03 INFO1 track_source: Starting to track drift34p2 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: set dec 10.0342315512 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: pnt tr 360.0 10.0342315512 -CF 2009-Jan-11 18:54:03 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:54:03 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-11 18:54:03 LOG5 finish_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Jan-11 18:54:03 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-11 18:54:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:54:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-11 18:54:03 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Jan-11 18:54:03 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:54:03 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Jan-11 18:54:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-11 18:54:03 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-11 18:54:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Jan-11 18:54:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-11 18:54:03 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-11 18:54:03 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift34p2" 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: set dec 10.0342315512 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 10.0342315512 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 10.0342315512 -CF 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-11 18:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:54:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-11 18:54:04 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-11 18:54:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-11 18:54:04 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Jan-11 18:54:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:54:04 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-11 18:54:04 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Jan-11 18:54:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-11 18:54:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:54:04 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-11 18:54:04 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Jan-11 18:54:04 START begin_task: Starting task 'waiting on telescope' 2009-Jan-11 18:54:04 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Jan-11 18:54:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-11 18:54:04 LOG3 waittrk: Start waittrk 5 2009-Jan-11 18:54:04 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-11 18:54:04 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Jan-11 18:54:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-11 18:54:09 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Jan-11 18:54:09 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-11 18:54:09 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-11 18:55:43 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-11 18:55:43 INFO2 waittrk: Now tracking drift34p2 2009-Jan-11 18:55:43 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.00 2009-Jan-11 18:55:43 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-11 18:55:43 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jan-11 18:55:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:55:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-11 18:55:43 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 START begin_task: Starting task 'selecting calibration type' 2009-Jan-11 18:55:43 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-11 18:55:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-11 18:55:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:55:43 START begin_task: Starting task 'waiting on setcal' 2009-Jan-11 18:55:43 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-11 18:55:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:43 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:55:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-11 18:55:43 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-11 18:55:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:55:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-11 18:55:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:55:43 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:55:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:55:43 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jan-11 18:55:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:55:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-11 18:55:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-11 18:55:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:55:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-11 18:55:44 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Jan-11 18:55:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-11 18:55:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-11 18:55:44 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Jan-11 18:55:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-11 18:55:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-11 18:55:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-11 18:55:44 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Jan-11 18:55:44 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Jan-11 18:55:44 INFO3 dopset_later: Setting Doppler correction now 2009-Jan-11 18:55:44 LOG5 antvel: Calling 'antvel 360.000000 10.034232 F Topocentric 0' 2009-Jan-11 18:55:44 LOG2 antvel: Transforming current Az = 360.00 ZA = 10.03 to apparent RA = 01:55:00.5 Dec = +08:19:10.5 2009-Jan-11 18:55:44 LOG2 antvel: Parameters to Doppler: Topocentric 82543 2009 11 0.0 2009-Jan-11 18:55:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-11 18:55:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-11 18:55:44 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-11 18:55:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-11 18:55:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-11 18:55:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:55:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:55:44 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:55:44 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2009-Jan-11 18:55:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-11 18:55:44 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-11 18:55:44 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-11 18:55:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-11 18:55:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:55:44 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-11 18:55:44 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-11 18:55:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-11 18:55:47 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Jan-11 18:55:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-11 18:55:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-11 18:55:47 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jan-11 18:55:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-11 18:55:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:55:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:55:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:55:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-11 18:55:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-11 18:55:47 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Jan-11 18:55:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-11 18:55:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-11 18:55:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 5 dB 2009-Jan-11 18:55:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-Jan-11 18:55:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-11 18:55:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Jan-11 18:55:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-11 18:55:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-11 18:55:47 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Jan-11 18:55:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.903 0.903 ALFA beam 1: 0.907 1.099 2009-Jan-11 18:55:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.014 0.980 ALFA beam 3: 1.083 1.104 2009-Jan-11 18:55:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.892 0.898 ALFA beam 5: 1.051 0.980 2009-Jan-11 18:55:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.964 0.106 ALFA beam 7: 1.074 0.116 2009-Jan-11 18:55:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:55:48 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:55:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:55:48 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-11 18:55:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-11 18:55:48 LOG5 finish_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-11 18:55:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-11 18:55:48 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 01:54:29.7 LST = 01:55:04.5 diff = -34.9 secs 2009-Jan-11 18:55:48 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Jan-11 18:55:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:55:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:55:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:55:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann & Sabrina 2009-Jan-11 18:55:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-11 18:55:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-11 18:55:48 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-11 18:55:48 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-11 18:55:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-11 18:55:48 INFO2 take_data: Starting WAPP 600-second scan: 901100193 2009-Jan-11 18:55:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-11 18:55:48 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jan-11 18:55:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann & Sabrina' 2009-Jan-11 18:55:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-11 18:55:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82549.00 2009-Jan-11 18:55:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20090111.a2010.0043.fits 2009-Jan-11 18:55:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090111.a2010.0043.fits} 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1009.160905 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1056.430098 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 963.569731 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-11 18:55:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:55:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.907 0.910 1.107 2009-Jan-11 18:55:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.982 1.104 1.108 2009-Jan-11 18:55:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.898 1.051 0.980 2009-Jan-11 18:55:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.106 1.074 0.116 2009-Jan-11 18:55:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:55:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:55:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Jan-11 18:55:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Jan-11 18:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:55:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:56:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:56:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:56:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Jan-11 18:56:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:56:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:56:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:56:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Jan-11 18:56:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:56:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Jan-11 18:56:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:56:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Jan-11 18:56:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Jan-11 18:56:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:56:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Jan-11 18:56:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:56:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:56:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.111 (still bad) 2009-Jan-11 18:56:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:56:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:56:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.907 0.910 1.111 2009-Jan-11 18:56:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.981 1.104 1.109 2009-Jan-11 18:56:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.902 1.054 0.984 2009-Jan-11 18:56:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.106 1.076 0.116 2009-Jan-11 18:56:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Jan-11 18:56:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Jan-11 18:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:56:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:57:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:57:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:57:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Jan-11 18:57:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:57:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Jan-11 18:57:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:57:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Jan-11 18:57:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Jan-11 18:57:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Jan-11 18:57:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Jan-11 18:57:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:57:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:57:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:57:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:57:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:57:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Jan-11 18:57:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Jan-11 18:57:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:57:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Jan-11 18:57:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-11 18:57:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:57:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Jan-11 18:57:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Jan-11 18:57:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Jan-11 18:57:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Jan-11 18:57:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:57:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:57:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Jan-11 18:57:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.904 0.910 1.120 2009-Jan-11 18:57:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.981 1.106 1.111 2009-Jan-11 18:57:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 0.900 1.049 0.983 2009-Jan-11 18:57:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.106 1.078 0.116 2009-Jan-11 18:57:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:57:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:57:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:57:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:57:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:57:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:58:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Jan-11 18:58:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Jan-11 18:58:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Jan-11 18:58:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:58:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Jan-11 18:58:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Jan-11 18:58:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Jan-11 18:58:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Jan-11 18:58:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:58:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:58:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Jan-11 18:58:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:58:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Jan-11 18:58:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Jan-11 18:58:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Jan-11 18:58:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Jan-11 18:58:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Jan-11 18:58:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Jan-11 18:58:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Jan-11 18:58:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2009-Jan-11 18:58:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2009-Jan-11 18:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Jan-11 18:58:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12