2009-Jan-08 18:19:14 BEGIN executive: CIMA executive starting ... 2009-Jan-08 18:19:14 NOTE executive: STARTING NEW CIMA SESSION 2009-Jan-08 18:19:14 INFO1 executive: Using CIMA version 3.1.02 'smart' from 2008-12-29 17:19 2009-Jan-08 18:19:14 INFO4 executive: This is an ON-LINE session 2009-Jan-08 18:19:15 INFO4 executive: This is a REMOTE session 2009-Jan-08 18:19:15 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jan-08 18:19:15 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'D Brisbin & R Giovanelli' 2009-Jan-08 18:19:15 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090108' 2009-Jan-08 18:19:15 LOG2 log_preferences: Currently applied preferences: 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(datawindow) = open 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(logcolours) = full 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(displayformat) = long 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(logformat) = new 2009-Jan-08 18:19:15 LOG2 log_preferences: prefs(fontsize) = 3 2009-Jan-08 18:19:15 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-08 18:19:15 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-08 18:19:15 ALERT executive: CIMA executive ready 2009-Jan-08 18:19:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:18 LOG4 got_cormsg: From DATATAKING: setup 2009-Jan-08 18:19:18 NOTE frontend: CIMA frontend ready 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Jan-08 18:19:24 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jan-08 18:19:24 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:27 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jan-08 18:19:27 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Jan-08 18:19:27 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Jan-08 18:19:27 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-08 18:19:27 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-08 18:19:27 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-08 18:19:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-08 18:19:28 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-08 18:19:28 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-08 18:19:28 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-08 18:19:28 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-08 18:19:28 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-08 18:19:28 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Jan-08 18:19:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:19:28 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-08 18:19:28 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jan-08 18:19:28 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-08 18:19:28 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-08 18:19:34 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-08 18:19:34 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-08 18:19:34 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-08 18:19:34 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-08 18:19:34 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-08 18:19:34 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-08 18:19:34 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-08 18:19:34 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-08 18:19:34 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jan-08 18:19:34 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-08 18:19:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:19:37 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-08 18:19:38 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-08 18:19:38 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-08 18:19:38 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-08 18:19:55 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Jan-08 18:20:01 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Jan-08 18:20:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Jan-08 18:20:01 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Jan-08 18:20:02 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Jan-08 18:20:02 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-08 18:20:02 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-08 18:20:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Jan-08 18:20:02 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Jan-08 18:20:02 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Jan-08 18:20:02 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-08 18:20:02 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jan-08 18:20:02 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-08 18:20:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-08 18:20:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-08 18:20:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-08 18:20:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-08 18:20:04 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-08 18:20:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-08 18:20:04 INFO1 config_iflo: Selecting receiver ALFA 2009-Jan-08 18:20:04 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jan-08 18:20:04 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jan-08 18:20:04 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jan-08 18:20:04 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 NOTE select_receiver: Starting to select receiver ALFA 2009-Jan-08 18:20:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jan-08 18:20:04 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jan-08 18:20:04 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jan-08 18:20:04 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jan-08 18:20:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:20:04 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jan-08 18:20:04 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jan-08 18:20:04 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jan-08 18:20:04 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jan-08 18:20:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jan-08 18:20:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:20:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:20:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:20:04 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:20:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:20:04 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jan-08 18:20:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:20:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-08 18:20:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jan-08 18:20:04 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-08 18:20:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jan-08 18:20:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-08 18:20:05 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jan-08 18:20:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-08 18:20:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-08 18:20:05 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jan-08 18:20:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:20:20 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-08 18:20:20 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jan-08 18:20:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-08 18:20:20 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-08 18:20:20 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-08 18:20:20 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-08 18:20:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:20:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-08 18:20:20 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jan-08 18:20:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-08 18:20:20 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-08 18:20:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-08 18:20:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-08 18:20:21 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-08 18:20:21 START begin_task: Starting task 'selecting calibration port' 2009-Jan-08 18:20:21 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-08 18:20:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-08 18:20:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:21 START begin_task: Starting task 'waiting on calport' 2009-Jan-08 18:20:21 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:20:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-08 18:20:21 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-08 18:20:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-08 18:20:21 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:20:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:20:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:20:21 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:20:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:20:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:20:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:20:21 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-08 18:20:21 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-08 18:20:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:20:21 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:20:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:20:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:20:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:20:21 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:22 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-08 18:20:22 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-08 18:20:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:20:22 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-08 18:20:22 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Jan-08 18:20:22 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Jan-08 18:20:22 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Jan-08 18:20:22 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Jan-08 18:20:22 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jan-08 18:20:22 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jan-08 18:20:22 LOG3 track_source: Calling 'track_source galfasrc 010800.0 +083818 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-08 18:20:22 START begin_task: Starting task 'sending tracking commands' 2009-Jan-08 18:20:22 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jan-08 18:20:22 INFO1 track_source: Starting to track galfasrc 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: set ra 010800.0 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: set dec +083818 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: pnt tr 010800.0 +083818 -CJ 2009-Jan-08 18:20:22 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:20:22 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-08 18:20:22 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-08 18:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:20:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-08 18:20:22 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jan-08 18:20:22 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jan-08 18:20:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:20:22 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jan-08 18:20:22 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jan-08 18:20:22 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Jan-08 18:20:22 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jan-08 18:20:22 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:20:22 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-08 18:20:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-08 18:20:23 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-08 18:20:23 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-08 18:20:23 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-08 18:20:23 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-08 18:20:23 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-08 18:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:20:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0046.fits 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jan-08 18:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-08 18:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-08 18:20:23 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090108.a2010.0046.fits} 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: set ra 010800.0 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: set dec +083818 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: vw% 010800.0 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: vw% +083818 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: pnt tr 010800.0 +083818 -CJ 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-08 18:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:20:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-08 18:20:23 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-08 18:20:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-08 18:20:23 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jan-08 18:20:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-08 18:20:23 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:20:23 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-08 18:20:23 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-08 18:20:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:20:23 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-08 18:20:23 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jan-08 18:20:23 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Jan-08 18:20:23 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jan-08 18:20:24 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-08 18:20:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-08 18:20:24 LOG3 waittrk: Start waittrk 5 2009-Jan-08 18:20:24 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-08 18:20:24 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-08 18:20:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-08 18:20:29 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jan-08 18:20:29 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-08 18:20:29 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-08 18:20:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-08 18:20:40 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jan-08 18:20:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-08 18:20:40 INFO2 waittrk: Now tracking galfasrc 2009-Jan-08 18:20:40 LOG4 waittrk: Current telescope position: Az = 359.00 ZA = 9.63 2009-Jan-08 18:20:40 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-08 18:20:40 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-08 18:20:40 DONE finish_task: DONE finished waiting: telescope on source 2009-Jan-08 18:20:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:20:40 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-08 18:20:40 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jan-08 18:20:40 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-08 18:20:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jan-08 18:20:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jan-08 18:20:41 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Jan-08 18:20:41 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jan-08 18:20:41 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jan-08 18:20:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jan-08 18:20:41 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 18:20:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 18:20:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:41 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 18:20:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:20:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 18:20:41 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 18:20:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:20:41 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 18:20:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:20:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:20:41 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:20:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 18:20:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:20:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:20:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:20:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:20:41 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:20:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:20:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 18:20:41 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:20:41 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090108.a2010.0046.fits' is empty! 2009-Jan-08 18:20:41 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jan-08 18:20:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-08 18:20:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 18:20:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:20:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:20:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:20:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:20:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:20:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:20:41 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-08 18:20:41 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-08 18:20:41 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-08 18:20:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-08 18:20:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-08 18:20:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-08 18:20:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-08 18:20:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-08 18:20:42 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-08 18:20:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-08 18:20:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:20:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:20:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-08 18:20:44 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-08 18:20:45 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-08 18:20:45 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-08 18:20:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:20:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:20:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:20:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:20:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-08 18:20:45 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-08 18:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 5 dB 2009-Jan-08 18:20:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-08 18:20:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-08 18:20:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2009-Jan-08 18:20:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-08 18:20:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-08 18:20:45 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.897 1.080 ALFA beam 1: 0.898 1.101 2009-Jan-08 18:20:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.961 0.930 ALFA beam 3: 1.039 1.039 2009-Jan-08 18:20:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.073 1.054 ALFA beam 5: 1.012 0.952 2009-Jan-08 18:20:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.914 1.049 ALFA beam 7: 1.021 0.920 2009-Jan-08 18:20:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-08 18:20:45 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-08 18:20:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:20:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-08 18:20:45 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 18:20:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-08 18:20:45 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-08 18:20:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:20:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-08 18:20:45 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jan-08 18:20:45 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-08 18:20:45 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:20:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-08 18:20:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:20:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:20:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:20:45 LOG2 antvel: Parameters to Doppler: Topocentric 80445 2009 8 0.0 2009-Jan-08 18:20:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:20:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-08 18:20:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-08 18:20:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:20:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:20:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:20:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-08 18:20:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:20:46 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-08 18:20:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:20:46 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.135306 2009.0239956460566 18.999933 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333263 8.638333333333332 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 1 1.132106246342511 8.742897604714418 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 2 1.127504793495580 8.672658592747982 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 3 1.128691504947737 8.567971663992816 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 4 1.134584946450050 8.533802685965988 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 5 1.139201825191649 8.604758864543935 2009-Jan-08 18:20:46 LOG4 log_alfabeam: ALFABEAM 6 1.137909892576557 8.709161278687805 2009-Jan-08 18:20:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800142 2009-Jan-08 18:20:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:20:46 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-08 18:20:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:20:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:20:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:20:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:20:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80447.00 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:20:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:20:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:20:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:20:57 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jan-08 18:20:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:20:57 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jan-08 18:20:57 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-08 18:20:57 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:20:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-08 18:20:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:20:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:20:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:20:57 LOG2 antvel: Parameters to Doppler: Topocentric 80457 2009 8 0.0 2009-Jan-08 18:20:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:20:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-08 18:20:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-08 18:20:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:20:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:20:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:20:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-08 18:20:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:20:57 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-08 18:20:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:20:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.138649 2009.0239960263139 18.999933 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333331939 8.638333333333332 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 1 1.132141147661015 8.742986336761692 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 2 1.127516312056319 8.673085728544164 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 3 1.128668094500784 8.568313026578775 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 4 1.134550075924837 8.533712154797866 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 5 1.139190553332510 8.604328814131476 2009-Jan-08 18:20:57 LOG4 log_alfabeam: ALFABEAM 6 1.137933461784966 8.708824713695481 2009-Jan-08 18:20:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800143 2009-Jan-08 18:20:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:20:58 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-08 18:20:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:20:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:20:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:20:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-08 18:20:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:20:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80459.00 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:21:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:21:09 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jan-08 18:21:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:21:09 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jan-08 18:21:09 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-08 18:21:09 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:21:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-08 18:21:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:21:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:21:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:21:09 LOG2 antvel: Parameters to Doppler: Topocentric 80469 2009 8 0.0 2009-Jan-08 18:21:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:21:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-08 18:21:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-08 18:21:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:21:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:21:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:21:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-08 18:21:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:21:09 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-08 18:21:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:21:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.141991 2009.0239964065709 18.999933 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333334226 8.638333333333335 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 1 1.132176068770645 8.743072485112014 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 2 1.127527969396271 8.673511893665616 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 3 1.128644805037253 8.568656006534031 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 4 1.134515184401755 8.533624204699619 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 5 1.139179140670868 8.603899697236704 2009-Jan-08 18:21:09 LOG4 log_alfabeam: ALFABEAM 6 1.137956913172799 8.708486505929489 2009-Jan-08 18:21:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800144 2009-Jan-08 18:21:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:21:10 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-08 18:21:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:21:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:21:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:21:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80471.00 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:21:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:21:21 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jan-08 18:21:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:21:21 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jan-08 18:21:21 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-08 18:21:21 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:21:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-08 18:21:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:21:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:21:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:21:21 LOG2 antvel: Parameters to Doppler: Topocentric 80481 2009 8 0.0 2009-Jan-08 18:21:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:21:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-08 18:21:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-08 18:21:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:21:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:21:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:21:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-08 18:21:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:21:21 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-08 18:21:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:21:21 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.145334 2009.0239967868279 18.999933 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333784 8.638333333333335 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 1 1.132211027903150 8.743156094728310 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 2 1.127539771597882 8.673937310784417 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 3 1.128621624387144 8.569000782885364 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 4 1.134480253659677 8.533538789907080 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 5 1.139167581223104 8.603471289873553 2009-Jan-08 18:21:21 LOG4 log_alfabeam: ALFABEAM 6 1.137980258966190 8.708146478484064 2009-Jan-08 18:21:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800145 2009-Jan-08 18:21:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:21:22 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-08 18:21:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:21:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:21:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:21:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80483.00 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:21:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:21:33 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jan-08 18:21:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:21:33 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jan-08 18:21:33 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-08 18:21:33 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:21:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-08 18:21:33 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:21:33 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:21:33 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:21:33 LOG2 antvel: Parameters to Doppler: Topocentric 80493 2009 8 0.0 2009-Jan-08 18:21:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:21:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-08 18:21:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-08 18:21:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:21:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:21:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:21:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-08 18:21:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:21:33 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-08 18:21:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:21:33 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.148676 2009.0239971670849 18.999933 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333294 8.638333333333332 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 1 1.132246001483355 8.743237109592760 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 2 1.127551710681213 8.674361693240748 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 3 1.128598568164874 8.569347122757607 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 4 1.134445307246827 8.533455967795721 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 5 1.139155882798392 8.603043880954509 2009-Jan-08 18:21:33 LOG4 log_alfabeam: ALFABEAM 6 1.138003483448411 8.707804860666213 2009-Jan-08 18:21:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800146 2009-Jan-08 18:21:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:21:34 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-08 18:21:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:21:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:21:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:21:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80495.00 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:21:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:21:45 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jan-08 18:21:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:21:45 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jan-08 18:21:45 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-08 18:21:45 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:21:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-08 18:21:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:21:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:21:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:21:45 LOG2 antvel: Parameters to Doppler: Topocentric 80505 2009 8 0.0 2009-Jan-08 18:21:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:21:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-08 18:21:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-08 18:21:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:21:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:21:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:21:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-08 18:21:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:21:45 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-08 18:21:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:21:45 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.152019 2009.0239975473419 18.999933 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333502 8.638333333333339 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 1 1.132281007771310 8.743315572783908 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 2 1.127563792835644 8.674785263060858 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 3 1.128575624290261 8.569695206418885 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 4 1.134410326921382 8.533375694484144 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 5 1.139144039311184 8.602617247117269 2009-Jan-08 18:21:45 LOG4 log_alfabeam: ALFABEAM 6 1.138026598757733 8.707461474314291 2009-Jan-08 18:21:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800147 2009-Jan-08 18:21:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:21:46 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-08 18:21:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:21:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:21:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:21:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80507.00 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:21:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:21:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:21:57 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jan-08 18:21:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:21:57 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jan-08 18:21:57 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-08 18:21:57 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:21:57 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-08 18:21:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:21:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:21:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:21:57 LOG2 antvel: Parameters to Doppler: Topocentric 80517 2009 8 0.0 2009-Jan-08 18:21:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:21:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-08 18:21:57 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-08 18:21:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:21:57 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:21:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:21:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-08 18:21:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:21:57 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-08 18:21:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:21:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.155361 2009.0239979275991 18.999933 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333476 8.638333333333335 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 1 1.132316023150196 8.743391432554283 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 2 1.127576009843558 8.675207735136455 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 3 1.128552808176583 8.570044798268244 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 4 1.134375336279194 8.533298023081700 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 5 1.139132058799523 8.602191675788964 2009-Jan-08 18:21:57 LOG4 log_alfabeam: ALFABEAM 6 1.138049589355557 8.707116551508127 2009-Jan-08 18:21:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800148 2009-Jan-08 18:21:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:21:58 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-08 18:21:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:21:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:21:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:21:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:21:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:21:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80519.00 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:22:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:22:09 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jan-08 18:22:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:22:09 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jan-08 18:22:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-08 18:22:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 18:22:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 18:22:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:22:09 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-08 18:22:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:22:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 18:22:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:22:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:22:09 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jan-08 18:22:09 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-08 18:22:09 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:22:09 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-08 18:22:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:22:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:22:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:22:09 LOG2 antvel: Parameters to Doppler: Topocentric 80529 2009 8 0.0 2009-Jan-08 18:22:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:22:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-08 18:22:09 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-08 18:22:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:22:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:22:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:22:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-08 18:22:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:22:09 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-08 18:22:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:22:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.158703 2009.0239983078561 18.999933 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333451 8.638333333333327 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 1 1.132351055412907 8.743464708553555 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 2 1.127588364280914 8.675629204860414 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 3 1.128530114601894 8.570395974479100 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 4 1.134340327532960 8.533222933677054 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 5 1.139119938725615 8.601767071162040 2009-Jan-08 18:22:09 LOG4 log_alfabeam: ALFABEAM 6 1.138072460485973 8.706770016781354 2009-Jan-08 18:22:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800149 2009-Jan-08 18:22:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:22:10 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-08 18:22:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:22:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:22:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:22:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80531.00 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:22:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:22:21 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jan-08 18:22:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:22:21 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jan-08 18:22:21 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-08 18:22:21 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:22:21 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-08 18:22:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:22:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:22:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:22:21 LOG2 antvel: Parameters to Doppler: Topocentric 80541 2009 8 0.0 2009-Jan-08 18:22:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:22:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-08 18:22:21 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-08 18:22:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:22:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:22:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:22:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-08 18:22:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:22:21 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-08 18:22:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:22:21 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.162046 2009.0239986881131 18.999933 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333430 8.638333333333339 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 1 1.132386112369773 8.743535417937826 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 2 1.127600858855403 8.676049766678322 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 3 1.128507538460674 8.570748812774301 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 4 1.134305292875831 8.533150408850567 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 5 1.139107676415543 8.601343338343916 2009-Jan-08 18:22:21 LOG4 log_alfabeam: ALFABEAM 6 1.138095217279419 8.706421793094131 2009-Jan-08 18:22:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800150 2009-Jan-08 18:22:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:22:22 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-08 18:22:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:22:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:22:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:22:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80543.00 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:22:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:22:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:22:33 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jan-08 18:22:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:22:33 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jan-08 18:22:33 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-08 18:22:33 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:22:33 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-08 18:22:33 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:22:33 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:22:33 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:22:33 LOG2 antvel: Parameters to Doppler: Topocentric 80553 2009 8 0.0 2009-Jan-08 18:22:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:22:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-08 18:22:33 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-08 18:22:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:22:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:22:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:22:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-08 18:22:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:22:33 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-08 18:22:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:22:33 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.165388 2009.0239990683701 18.999933 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333326 8.638333333333330 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 1 1.132421170368138 8.743603515394827 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 2 1.127613485011755 8.676469138038488 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 3 1.128485094859130 8.571103073667542 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 4 1.134270255945005 8.533080495280553 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 5 1.139095280252161 8.600920762300344 2009-Jan-08 18:22:33 LOG4 log_alfabeam: ALFABEAM 6 1.138117844491256 8.706072116488084 2009-Jan-08 18:22:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800151 2009-Jan-08 18:22:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:22:34 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-08 18:22:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:22:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:22:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:22:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80555.00 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:22:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:22:45 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jan-08 18:22:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:22:45 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jan-08 18:22:45 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-08 18:22:45 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:22:45 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-08 18:22:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:22:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:22:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:22:45 LOG2 antvel: Parameters to Doppler: Topocentric 80565 2009 8 0.0 2009-Jan-08 18:22:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:22:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-08 18:22:45 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-08 18:22:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:22:45 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:22:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:22:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-08 18:22:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:22:45 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-08 18:22:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:22:45 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.168731 2009.0239994486271 18.999933 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333416 8.638333333333339 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 1 1.132456247707386 8.743669039266637 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 2 1.127626249195336 8.676887539230099 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 3 1.128462771936111 8.571458940432713 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 4 1.134235198452223 8.533013153818152 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 5 1.139082743894738 8.600499121351522 2009-Jan-08 18:22:45 LOG4 log_alfabeam: ALFABEAM 6 1.138140354061861 8.705720805758261 2009-Jan-08 18:22:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800152 2009-Jan-08 18:22:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:22:46 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-08 18:22:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:22:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:22:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:22:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80567.00 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:22:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:22:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:22:57 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jan-08 18:22:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:22:57 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jan-08 18:22:57 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-08 18:22:57 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:22:57 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-08 18:22:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:22:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:22:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:22:57 LOG2 antvel: Parameters to Doppler: Topocentric 80577 2009 8 0.0 2009-Jan-08 18:22:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:22:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-08 18:22:57 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-08 18:22:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:22:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:22:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:22:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-08 18:22:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:22:57 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-08 18:22:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:22:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.172073 2009.0239998288844 18.999933 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333457 8.638333333333335 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 1 1.132491320722837 8.743731948542848 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 2 1.127639142629356 8.677304689555903 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 3 1.128440584584219 8.571816171134154 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 4 1.134200144047945 8.532948426841033 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 5 1.139070075950993 8.600078698669362 2009-Jan-08 18:22:57 LOG4 log_alfabeam: ALFABEAM 6 1.138162730954047 8.705368099450295 2009-Jan-08 18:22:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800153 2009-Jan-08 18:22:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:22:58 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-08 18:22:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:22:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:22:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:22:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:22:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80579.00 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:23:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:23:09 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jan-08 18:23:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:23:09 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jan-08 18:23:09 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-08 18:23:09 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:23:09 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-08 18:23:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:23:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:23:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:23:09 LOG2 antvel: Parameters to Doppler: Topocentric 80589 2009 8 0.0 2009-Jan-08 18:23:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:23:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-08 18:23:09 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-08 18:23:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:23:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:23:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:23:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-08 18:23:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:23:09 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-08 18:23:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:23:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.175416 2009.0240002091414 18.999933 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333340 8.638333333333327 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 1 1.132526407725752 8.743792279660067 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 2 1.127652171860353 8.677720808559961 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 3 1.128418521032666 8.572174950208389 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 4 1.134165074431261 8.532886277104435 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 5 1.139057269977932 8.599659273297455 2009-Jan-08 18:23:09 LOG4 log_alfabeam: ALFABEAM 6 1.138184987019645 8.705013815180992 2009-Jan-08 18:23:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800154 2009-Jan-08 18:23:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:23:10 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-08 18:23:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:23:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:23:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80591.00 2009-Jan-08 18:23:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:23:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:23:21 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jan-08 18:23:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:23:21 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jan-08 18:23:21 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-08 18:23:21 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:23:21 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-08 18:23:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:23:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:23:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:23:21 LOG2 antvel: Parameters to Doppler: Topocentric 80601 2009 8 0.0 2009-Jan-08 18:23:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:23:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-08 18:23:21 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-08 18:23:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:23:21 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:23:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:23:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-08 18:23:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:23:21 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-08 18:23:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:23:21 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.178758 2009.0240005893984 18.999933 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333336 8.638333333333328 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 1 1.132561485050898 8.743849995912003 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 2 1.127665327895669 8.678135617515924 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 3 1.128396595955547 8.572535033386616 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 4 1.134130013256278 8.532826742681902 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 5 1.139044334803853 8.599241126495075 2009-Jan-08 18:23:21 LOG4 log_alfabeam: ALFABEAM 6 1.138207107435452 8.704658193886772 2009-Jan-08 18:23:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800155 2009-Jan-08 18:23:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:23:22 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-08 18:23:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:23:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:23:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:23:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80603.00 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:23:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:23:33 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jan-08 18:23:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:23:33 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jan-08 18:23:33 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jan-08 18:23:33 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-08 18:23:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 18:23:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:23:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:23:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:23:33 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-08 18:23:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:23:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:23:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:23:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:23:33 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jan-08 18:23:33 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jan-08 18:23:33 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Jan-08 18:23:33 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:23:33 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-08 18:23:33 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:23:33 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:23:33 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:23:33 LOG2 antvel: Parameters to Doppler: Topocentric 80613 2009 8 0.0 2009-Jan-08 18:23:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:23:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-08 18:23:33 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-08 18:23:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:23:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:23:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:23:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Jan-08 18:23:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:23:33 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-08 18:23:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:23:33 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.182101 2009.0240009696554 18.999933 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333391 8.638333333333335 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 1 1.132596571018875 8.743905131823356 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 2 1.127678617382006 8.678549335193706 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 3 1.128374797674160 8.572896606245230 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 4 1.134094942211621 8.532769788239316 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 5 1.139031263884035 8.598824038058405 2009-Jan-08 18:23:33 LOG4 log_alfabeam: ALFABEAM 6 1.138229103962841 8.704301052028610 2009-Jan-08 18:23:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800156 2009-Jan-08 18:23:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:23:34 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-08 18:23:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:23:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:23:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Jan-08 18:23:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80615.00 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:23:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:23:45 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jan-08 18:23:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:23:45 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jan-08 18:23:45 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Jan-08 18:23:45 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:23:45 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-08 18:23:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:23:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:23:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:23:45 LOG2 antvel: Parameters to Doppler: Topocentric 80625 2009 8 0.0 2009-Jan-08 18:23:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:23:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-08 18:23:45 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-08 18:23:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:23:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:23:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:23:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Jan-08 18:23:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:23:45 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-08 18:23:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:23:45 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.185443 2009.0240013499124 18.999933 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333358 8.638333333333335 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 1 1.132631641973729 8.743957654988336 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 2 1.127692031115333 8.678961684951142 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 3 1.128353140637904 8.573259422301174 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 4 1.134059884944235 8.532715447548311 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 5 1.139018066262551 8.598408287218044 2009-Jan-08 18:23:45 LOG4 log_alfabeam: ALFABEAM 6 1.138250961997979 8.703942632817339 2009-Jan-08 18:23:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800157 2009-Jan-08 18:23:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:23:46 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-08 18:23:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:23:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:23:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Jan-08 18:23:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80627.00 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:23:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:23:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:23:57 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jan-08 18:23:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:23:57 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jan-08 18:23:57 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Jan-08 18:23:57 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:23:57 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-08 18:23:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:23:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:23:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:23:57 LOG2 antvel: Parameters to Doppler: Topocentric 80637 2009 8 0.0 2009-Jan-08 18:23:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:23:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-08 18:23:57 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-08 18:23:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:23:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:23:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:23:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Jan-08 18:23:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:23:57 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-08 18:23:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:23:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.188786 2009.0240017301696 18.999933 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333415 8.638333333333335 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 1 1.132666716243399 8.744007598013173 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 2 1.127705575842130 8.679372884754709 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 3 1.128331613262103 8.573623668247828 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 4 1.134024823134828 8.532663687192276 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 5 1.139004735293558 8.597993654552374 2009-Jan-08 18:23:57 LOG4 log_alfabeam: ALFABEAM 6 1.138272693210246 8.703582751580875 2009-Jan-08 18:23:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800158 2009-Jan-08 18:23:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:23:58 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-08 18:23:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:23:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Jan-08 18:23:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80639.00 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:24:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:24:09 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jan-08 18:24:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:24:09 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jan-08 18:24:09 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Jan-08 18:24:09 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:24:09 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-08 18:24:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:24:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:24:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:24:09 LOG2 antvel: Parameters to Doppler: Topocentric 80649 2009 8 0.0 2009-Jan-08 18:24:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:24:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-08 18:24:09 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-08 18:24:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:24:09 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:24:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:24:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Jan-08 18:24:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:24:09 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-08 18:24:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:24:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.192128 2009.0240021104266 18.999933 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333351 8.638333333333332 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 1 1.132701770191657 8.744054932783209 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 2 1.127719242152129 8.679782660156375 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 3 1.128310229766628 8.573989095509226 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 4 1.133989780412700 8.532614536649154 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 5 1.138991280231795 8.597580417150828 2009-Jan-08 18:24:09 LOG4 log_alfabeam: ALFABEAM 6 1.138294283220523 8.703221653685796 2009-Jan-08 18:24:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800159 2009-Jan-08 18:24:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:24:10 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-08 18:24:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:24:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:24:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Jan-08 18:24:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80651.00 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:24:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:24:21 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jan-08 18:24:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:24:21 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jan-08 18:24:21 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Jan-08 18:24:21 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:24:21 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-08 18:24:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:24:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:24:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:24:21 LOG2 antvel: Parameters to Doppler: Topocentric 80661 2009 8 0.0 2009-Jan-08 18:24:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:24:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-08 18:24:21 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-08 18:24:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:24:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:24:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:24:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Jan-08 18:24:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:24:21 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-08 18:24:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:24:21 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.195471 2009.0240024906836 18.999933 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333371 8.638333333333339 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 1 1.132736822150987 8.744099689979429 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 2 1.127733036890893 8.680191228289369 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 3 1.128288978662089 8.574355891872422 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 4 1.133954738453158 8.532567964426491 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 5 1.138977694331237 8.597168356403660 2009-Jan-08 18:24:21 LOG4 log_alfabeam: ALFABEAM 6 1.138315743604548 8.702859153349625 2009-Jan-08 18:24:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800160 2009-Jan-08 18:24:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:24:22 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-08 18:24:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:24:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:24:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Jan-08 18:24:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80663.00 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:24:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:24:33 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jan-08 18:24:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:24:33 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jan-08 18:24:33 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Jan-08 18:24:33 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:24:33 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-08 18:24:33 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:24:33 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:24:33 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:24:33 LOG2 antvel: Parameters to Doppler: Topocentric 80673 2009 8 0.0 2009-Jan-08 18:24:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:24:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-08 18:24:33 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-08 18:24:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:24:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:24:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:24:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Jan-08 18:24:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:24:33 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-08 18:24:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:24:33 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.198813 2009.0240028709406 18.999933 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333334 8.638333333333327 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 1 1.132771848515585 8.744141845763183 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 2 1.127746950447452 8.680598317006094 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 3 1.128267873934244 8.574723806792072 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 4 1.133919720857650 8.532523995722622 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 5 1.138963987051760 8.596757747150242 2009-Jan-08 18:24:33 LOG4 log_alfabeam: ALFABEAM 6 1.138337060212789 8.702495497973789 2009-Jan-08 18:24:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800161 2009-Jan-08 18:24:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:24:34 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-08 18:24:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:24:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:24:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Jan-08 18:24:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80675.00 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:24:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:24:45 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jan-08 18:24:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:24:45 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jan-08 18:24:45 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Jan-08 18:24:45 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:24:45 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-08 18:24:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:24:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:24:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:24:45 LOG2 antvel: Parameters to Doppler: Topocentric 80685 2009 8 0.0 2009-Jan-08 18:24:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:24:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-08 18:24:45 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-08 18:24:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:24:45 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:24:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:24:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Jan-08 18:24:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:24:45 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-08 18:24:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:24:45 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.202155 2009.0240032511979 18.999933 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333393 8.638333333333332 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 1 1.132806857147665 8.744181417429113 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 2 1.127760985547902 8.681004021390713 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 3 1.128246910442252 8.575092918503103 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 4 1.133884719768846 8.532482612972109 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 5 1.138950155705178 8.596348493874810 2009-Jan-08 18:24:45 LOG4 log_alfabeam: ALFABEAM 6 1.138358238209859 8.702130610052409 2009-Jan-08 18:24:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800162 2009-Jan-08 18:24:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:24:46 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-08 18:24:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:24:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:24:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Jan-08 18:24:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80687.00 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:24:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:24:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:24:57 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jan-08 18:24:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:24:57 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jan-08 18:24:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jan-08 18:24:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 18:24:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 18:24:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:24:57 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-08 18:24:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:24:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 18:24:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:24:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:24:57 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jan-08 18:24:57 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Jan-08 18:24:57 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:24:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Jan-08 18:24:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:24:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:24:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:24:57 LOG2 antvel: Parameters to Doppler: Topocentric 80697 2009 8 0.0 2009-Jan-08 18:24:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:24:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Jan-08 18:24:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Jan-08 18:24:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:24:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:24:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:24:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Jan-08 18:24:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:24:57 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-08 18:24:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:24:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.205498 2009.0240036314549 18.999933 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333324 8.638333333333325 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 1 1.132841855898894 8.744218419756773 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 2 1.127775145039404 8.681408435255969 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 3 1.128226083178651 8.575463306482909 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 4 1.133849727338877 8.532443801125302 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 5 1.138936197479394 8.595940502305620 2009-Jan-08 18:24:57 LOG4 log_alfabeam: ALFABEAM 6 1.138379282628395 8.701764410807119 2009-Jan-08 18:24:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800163 2009-Jan-08 18:24:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:24:58 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-08 18:24:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Jan-08 18:24:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:24:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:24:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:24:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Jan-08 18:24:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80699.00 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:25:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:25:09 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jan-08 18:25:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:25:09 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jan-08 18:25:09 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Jan-08 18:25:09 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:25:09 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Jan-08 18:25:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:25:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:25:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:25:09 LOG2 antvel: Parameters to Doppler: Topocentric 80709 2009 8 0.0 2009-Jan-08 18:25:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:25:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Jan-08 18:25:09 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Jan-08 18:25:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:25:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:25:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:25:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Jan-08 18:25:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:25:09 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-08 18:25:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:25:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.208840 2009.0240040117119 18.999933 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333363 8.638333333333330 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 1 1.132876821227857 8.744252835280395 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 2 1.127789419021260 8.681811290095482 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 3 1.128205405769963 8.575834717467384 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 4 1.133814767108135 8.532407578999935 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 5 1.138922122131540 8.595534043711000 2009-Jan-08 18:25:09 LOG4 log_alfabeam: ALFABEAM 6 1.138400179672284 8.701397150460503 2009-Jan-08 18:25:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800164 2009-Jan-08 18:25:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:25:10 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-08 18:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:25:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Jan-08 18:25:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Jan-08 18:25:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80711.00 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:25:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:25:21 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jan-08 18:25:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:25:21 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jan-08 18:25:21 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Jan-08 18:25:21 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:25:21 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Jan-08 18:25:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:25:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:25:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:25:21 LOG2 antvel: Parameters to Doppler: Topocentric 80721 2009 8 0.0 2009-Jan-08 18:25:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:25:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Jan-08 18:25:21 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Jan-08 18:25:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:25:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:25:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:25:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Jan-08 18:25:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:25:21 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-08 18:25:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:25:21 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.212183 2009.0240043919689 18.999933 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333377 8.638333333333335 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 1 1.132911771467755 8.744284689838418 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 2 1.127803814582593 8.682212800827308 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 3 1.128184866972343 8.576207341874216 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 4 1.133779820749187 8.532373919943987 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 5 1.138907922668468 8.595128901643715 2009-Jan-08 18:25:21 LOG4 log_alfabeam: ALFABEAM 6 1.138420940675558 8.701028640555970 2009-Jan-08 18:25:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800165 2009-Jan-08 18:25:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:25:22 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-08 18:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:25:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Jan-08 18:25:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Jan-08 18:25:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80723.00 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:25:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:25:33 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jan-08 18:25:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:25:33 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jan-08 18:25:33 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Jan-08 18:25:33 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:25:33 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Jan-08 18:25:33 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:25:33 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02400 J 2009-Jan-08 18:25:33 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:25:33 LOG2 antvel: Parameters to Doppler: Topocentric 80733 2009 8 0.0 2009-Jan-08 18:25:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:25:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Jan-08 18:25:33 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Jan-08 18:25:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:25:33 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:25:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:25:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Jan-08 18:25:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:25:33 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-08 18:25:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:25:33 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.215525 2009.0240047722259 18.999933 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333347 8.638333333333339 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 1 1.132946683132343 8.744313970178506 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 2 1.127818321636691 8.682612701493978 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 3 1.128164480167551 8.576580924785574 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 4 1.133744911749149 8.532342838555071 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 5 1.138893609037888 8.594725344866427 2009-Jan-08 18:25:33 LOG4 log_alfabeam: ALFABEAM 6 1.138441552082279 8.700659133040697 2009-Jan-08 18:25:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800166 2009-Jan-08 18:25:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:25:34 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-08 18:25:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:25:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Jan-08 18:25:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Jan-08 18:25:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80735.00 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:25:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:25:45 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jan-08 18:25:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:25:45 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jan-08 18:25:45 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Jan-08 18:25:45 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:25:45 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Jan-08 18:25:45 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:25:45 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02401 J 2009-Jan-08 18:25:45 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:25:45 LOG2 antvel: Parameters to Doppler: Topocentric 80745 2009 8 0.0 2009-Jan-08 18:25:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:25:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Jan-08 18:25:45 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Jan-08 18:25:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:25:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:25:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:25:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Jan-08 18:25:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:25:45 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-08 18:25:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:25:45 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.218868 2009.0240051524831 18.999933 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333353 8.638333333333335 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 1 1.132981574550995 8.744340700190309 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 2 1.127832947368883 8.683011206073509 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 3 1.128144234213214 8.576955657628975 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 4 1.133710021783969 8.532314310129465 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 5 1.138879174149275 8.594323157851150 2009-Jan-08 18:25:45 LOG4 log_alfabeam: ALFABEAM 6 1.138462025127241 8.700288438430182 2009-Jan-08 18:25:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800167 2009-Jan-08 18:25:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:25:46 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-08 18:25:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:25:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Jan-08 18:25:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Jan-08 18:25:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80747.00 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:25:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:25:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:25:57 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jan-08 18:25:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:25:57 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jan-08 18:25:57 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Jan-08 18:25:57 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:25:57 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Jan-08 18:25:57 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:25:57 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02401 J 2009-Jan-08 18:25:57 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:25:57 LOG2 antvel: Parameters to Doppler: Topocentric 80757 2009 8 0.0 2009-Jan-08 18:25:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:25:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Jan-08 18:25:57 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Jan-08 18:25:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:25:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:25:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:25:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Jan-08 18:25:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:25:57 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-08 18:25:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:25:57 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.222210 2009.0240055327401 18.999933 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333362 8.638333333333332 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 1 1.133016422302621 8.744364870800517 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 2 1.127847681512773 8.683408051249405 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 3 1.128124142242841 8.577331283961231 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 4 1.133675174277868 8.532288345077996 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 5 1.138864628134915 8.593922606759975 2009-Jan-08 18:25:57 LOG4 log_alfabeam: ALFABEAM 6 1.138482346498524 8.699916810269826 2009-Jan-08 18:25:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800168 2009-Jan-08 18:25:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:25:58 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-08 18:25:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:25:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Jan-08 18:25:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:25:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Jan-08 18:25:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80759.00 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:26:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:26:09 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jan-08 18:26:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:26:09 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jan-08 18:26:09 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Jan-08 18:26:09 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:26:09 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Jan-08 18:26:09 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:26:09 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02401 J 2009-Jan-08 18:26:09 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:26:09 LOG2 antvel: Parameters to Doppler: Topocentric 80769 2009 8 0.0 2009-Jan-08 18:26:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:26:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Jan-08 18:26:09 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Jan-08 18:26:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:26:09 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:26:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:26:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:26:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Jan-08 18:26:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jan-08 18:26:09 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-08 18:26:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:26:09 LOG5 log_alfabeam: Parameters: 1.1333333333333333 8.6383333333333336 1.225553 2009.0240059129972 18.999933 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 0 1.133333333333351 8.638333333333335 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 1 1.133051244709950 8.744386503943291 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 2 1.127862531348949 8.683803450028231 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 3 1.128104193217150 8.577707996194645 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 4 1.133640350912447 8.532264920651997 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 5 1.138849963807600 8.593523477015632 2009-Jan-08 18:26:09 LOG4 log_alfabeam: ALFABEAM 6 1.138502527329640 8.699544058071723 2009-Jan-08 18:26:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 900800169 2009-Jan-08 18:26:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jan-08 18:26:10 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-08 18:26:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:26:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Jan-08 18:26:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:26:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Jan-08 18:26:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80771.00 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:26:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:26:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jan-08 18:26:21 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jan-08 18:26:21 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 INFO2 smartfreq: Switching off CAL 2009-Jan-08 18:26:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:26:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:26:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:26:21 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:26:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:26:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:26:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:26:21 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 INFO3 restore_frequencies: Restoring original frequencies 2009-Jan-08 18:26:21 LOG5 antvel: Calling 'antvel 10800.000000 83818.000000 J Topocentric 0' 2009-Jan-08 18:26:21 LOG2 antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02401 J 2009-Jan-08 18:26:21 LOG2 antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:26:21 LOG2 antvel: Parameters to Doppler: Topocentric 80781 2009 8 0.0 2009-Jan-08 18:26:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:26:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-08 18:26:21 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-08 18:26:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:26:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:26:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:26:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:26:21 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jan-08 18:26:21 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jan-08 18:26:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:26:21 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jan-08 18:26:21 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jan-08 18:26:21 NOTE run_command_file: DONE with command file processing 2009-Jan-08 18:26:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jan-08 18:26:22 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Jan-08 18:26:22 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-08 18:26:22 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Jan-08 18:26:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:26:22 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Jan-08 18:26:22 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jan-08 18:26:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:26:55 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jan-08 18:26:55 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jan-08 18:26:55 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jan-08 18:26:55 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jan-08 18:26:55 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-08 18:26:55 NOTE restart_wapp: Restarting all WAPPs 2009-Jan-08 18:26:55 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jan-08 18:26:55 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jan-08 18:26:55 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Jan-08 18:26:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-08 18:26:55 LOG3 exec_msg: Closing socket 2009-Jan-08 18:26:55 LOG3 exec_msg: Closing socket 2009-Jan-08 18:26:55 LOG3 exec_msg: Closing socket 2009-Jan-08 18:26:55 LOG3 exec_msg: Closing socket 2009-Jan-08 18:26:57 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jan-08 18:26:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jan-08 18:26:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jan-08 18:26:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jan-08 18:27:17 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Jan-08 18:27:17 LOG2 CIMA-antvel: Precessing RA = 01:08:00.0 Dec = +08:38:18.0 Epoch = 2009.02401 J 2009-Jan-08 18:27:17 LOG2 CIMA-antvel: Computed apparent RA = 01:08:29.1 Dec = +08:41:18.1 2009-Jan-08 18:27:17 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80837 2009 8 0.0 2009-Jan-08 18:27:17 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Jan-08 18:27:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-08 18:27:19 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jan-08 18:27:19 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jan-08 18:27:19 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jan-08 18:27:19 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-08 18:27:19 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jan-08 18:27:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jan-08 18:27:19 LOG1 config_iflo: Receiver ALFA already selected 2009-Jan-08 18:27:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:27:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:27:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:27:19 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-08 18:27:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:27:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:27:19 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Jan-08 18:27:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:27:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:27:19 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jan-08 18:27:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jan-08 18:27:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jan-08 18:27:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jan-08 18:27:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jan-08 18:27:19 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jan-08 18:27:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jan-08 18:27:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:27:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jan-08 18:27:19 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-08 18:27:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:27:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jan-08 18:27:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:27:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:20 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jan-08 18:27:20 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jan-08 18:27:20 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Jan-08 18:27:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jan-08 18:27:20 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jan-08 18:27:20 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-08 18:27:20 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jan-08 18:27:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:27:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jan-08 18:27:20 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Jan-08 18:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jan-08 18:27:20 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jan-08 18:27:20 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jan-08 18:27:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jan-08 18:27:20 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-08 18:27:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jan-08 18:27:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jan-08 18:27:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jan-08 18:27:20 START begin_task: Starting task 'selecting calibration port' 2009-Jan-08 18:27:20 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-08 18:27:20 LOG3 vw_send: To DATATAKING: calport 3 2009-Jan-08 18:27:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jan-08 18:27:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:27:21 START begin_task: Starting task 'waiting on calport' 2009-Jan-08 18:27:21 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Jan-08 18:27:21 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jan-08 18:27:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:27:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jan-08 18:27:21 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jan-08 18:27:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jan-08 18:27:21 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:27:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:27:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:27:21 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:27:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:27:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:27:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:27:21 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:27:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:27:21 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jan-08 18:27:21 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jan-08 18:27:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:27:21 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jan-08 18:27:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:27:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jan-08 18:27:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:27:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:27:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:27:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:27:21 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jan-08 18:27:21 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jan-08 18:27:21 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jan-08 18:27:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:27:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jan-08 18:27:21 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Jan-08 18:27:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jan-08 18:27:22 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Jan-08 18:27:22 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Jan-08 18:27:22 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:27:22 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-08 18:27:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-08 18:27:22 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-08 18:27:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jan-08 18:27:22 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:27:22 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-08 18:27:22 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-08 18:27:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:27:22 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-08 18:27:22 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Jan-08 18:27:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-08 18:27:22 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-08 18:27:23 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Jan-08 18:27:42 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jan-08 18:27:42 LOG4 exec_msg: From OBSERVER: track_new_source drift36p1 011600.0 +083818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Jan-08 18:27:42 LOG1 track_new_source: Calling 'track_new_source drift36p1 011600.0 +083818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Jan-08 18:27:42 BEGIN begin_task: Starting task 'selecting new source' 2009-Jan-08 18:27:42 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift36p1} INFO {Selecting source 'drift36p1' ...} 2009-Jan-08 18:27:42 LOG3 track_source: Calling 'track_source drift36p1 011600.0 +083818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Jan-08 18:27:42 START begin_task: Starting task 'sending tracking commands' 2009-Jan-08 18:27:42 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift36p1} INFO {Slewing to source 'drift36p1' ...} 2009-Jan-08 18:27:42 INFO1 track_source: Starting to track drift36p1 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift36p1" 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: set ra 011600.0 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: set dec +083818 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: pnt tr 011600.0 +083818 -CJ 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:27:42 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-08 18:27:42 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:27:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-08 18:27:42 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Jan-08 18:27:42 START begin_task: Starting task 'applying pointing corrections' 2009-Jan-08 18:27:42 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jan-08 18:27:42 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-08 18:27:42 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jan-08 18:27:42 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:27:42 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jan-08 18:27:42 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 STOP finish_task: Finishing task 'selecting new source' 2009-Jan-08 18:27:42 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 DONE finish_task: DONE finished selecting: new source 2009-Jan-08 18:27:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jan-08 18:27:42 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jan-08 18:27:42 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift36p1" 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: set ra 011600.0 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: set dec +083818 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% 011600.0 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% +083818 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: pnt tr 011600.0 +083818 -CJ 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jan-08 18:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:51 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Jan-08 18:27:51 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift36p1 011600.0 +083818 J 0 Topocentric velocity(optical) 2009-Jan-08 18:27:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift36p1 011600.0 +083818 J 0 Topocentric velocity(optical)' 2009-Jan-08 18:27:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jan-08 18:27:51 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jan-08 18:27:51 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift36p1' 2009-Jan-08 18:27:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jan-08 18:27:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift36p1} 2009-Jan-08 18:27:51 INFO5 fixed_driftmap: Start: year = 2009.0240091451822 RA = 01:16:29.2 Dec = +08:41:16.3 2009-Jan-08 18:27:51 NOTE fixed_driftmap: Setting ZA to 9:39:57.4 ... 2009-Jan-08 18:27:51 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 9.67 2009-Jan-08 18:27:51 LOG3 track_source: Calling 'track_source drift36p1 360.0 9.6659480458 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Jan-08 18:27:51 START begin_task: Starting task 'sending tracking commands' 2009-Jan-08 18:27:51 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-08 18:27:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift36p1} INFO {Slewing to source 'drift36p1' ...} 2009-Jan-08 18:27:51 INFO1 track_source: Starting to track drift36p1 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift36p1" 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: set dec 9.6659480458 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: pnt tr 360.0 9.6659480458 -CF 2009-Jan-08 18:27:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:27:52 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jan-08 18:27:52 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-08 18:27:52 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jan-08 18:27:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:27:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jan-08 18:27:52 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Jan-08 18:27:52 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:27:52 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-08 18:27:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jan-08 18:27:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jan-08 18:27:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Jan-08 18:27:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jan-08 18:27:52 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jan-08 18:27:52 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift36p1" 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: set dec 9.6659480458 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: vw% 9.6659480458 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 9.6659480458 -CF 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jan-08 18:27:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:27:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jan-08 18:27:53 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jan-08 18:27:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jan-08 18:27:53 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jan-08 18:27:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-08 18:27:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jan-08 18:27:53 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-08 18:27:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jan-08 18:27:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:27:53 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jan-08 18:27:53 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Jan-08 18:27:53 START begin_task: Starting task 'waiting on telescope' 2009-Jan-08 18:27:53 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-08 18:27:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jan-08 18:27:53 LOG3 waittrk: Start waittrk 5 2009-Jan-08 18:27:53 START begin_task: Starting task 'waiting on telescope movement' 2009-Jan-08 18:27:53 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-08 18:27:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jan-08 18:27:58 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Jan-08 18:27:58 START begin_task: Starting task 'waiting on telescope on source' 2009-Jan-08 18:27:58 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jan-08 18:28:21 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jan-08 18:28:21 INFO2 waittrk: Now tracking drift36p1 2009-Jan-08 18:28:21 LOG4 waittrk: Current telescope position: Az = 359.65 ZA = 9.63 2009-Jan-08 18:28:21 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jan-08 18:28:21 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jan-08 18:28:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:28:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jan-08 18:28:21 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 18:28:21 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 18:28:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 18:28:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:28:21 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 18:28:21 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 18:28:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:28:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:28:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 18:28:21 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jan-08 18:28:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 18:28:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:28:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 18:28:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:28:22 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:28:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:28:22 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:28:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 18:28:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:28:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:28:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:28:22 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:28:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:28:22 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:28:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:28:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 18:28:22 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG5 dopset_later: Calling 'dopset_later 44.710912129310451' 2009-Jan-08 18:28:22 INFO3 dopset_later: Setting Doppler correction for 18:29:06 (44.7 seconds from now) 2009-Jan-08 18:28:22 LOG5 antvel: Calling 'antvel 360.000000 9.665948 F Topocentric 44.710912129310451' 2009-Jan-08 18:28:22 LOG2 antvel: Transforming current Az = 360.00 ZA = 9.67 to apparent RA = 01:16:29.1 Dec = +08:41:16.3 2009-Jan-08 18:28:22 LOG2 antvel: Parameters to Doppler: Topocentric 80946 2009 8 0.0 2009-Jan-08 18:28:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jan-08 18:28:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Jan-08 18:28:22 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Jan-08 18:28:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jan-08 18:28:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jan-08 18:28:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:28:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:28:22 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-08 18:28:22 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jan-08 18:28:22 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jan-08 18:28:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jan-08 18:28:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jan-08 18:28:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:28:22 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jan-08 18:28:22 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:28:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jan-08 18:28:25 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Jan-08 18:28:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jan-08 18:28:25 START begin_task: Starting task 'adjusting WAPP power' 2009-Jan-08 18:28:25 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-08 18:28:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jan-08 18:28:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:28:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:28:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:28:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jan-08 18:28:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jan-08 18:28:25 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-08 18:28:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jan-08 18:28:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:28:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 5 5 dB 2009-Jan-08 18:28:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jan-08 18:28:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Jan-08 18:28:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 2 3 dB 2009-Jan-08 18:28:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jan-08 18:28:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jan-08 18:28:26 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-Jan-08 18:28:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.890 1.077 ALFA beam 1: 1.113 1.044 2009-Jan-08 18:28:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.962 0.932 ALFA beam 3: 1.035 1.039 2009-Jan-08 18:28:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.050 1.039 ALFA beam 5: 1.006 0.948 2009-Jan-08 18:28:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.904 1.048 ALFA beam 7: 1.012 0.920 2009-Jan-08 18:28:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-08 18:28:26 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-08 18:28:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jan-08 18:28:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:28:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-08 18:28:26 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jan-08 18:28:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 18:28:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jan-08 18:28:26 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-08 18:28:26 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jan-08 18:28:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:28:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jan-08 18:28:26 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Jan-08 18:28:26 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 01:16:29.2 LST = 01:15:49.4 diff = 39.8 secs 2009-Jan-08 18:28:26 INFO2 fixed_driftmap: Waiting 37.8 seconds for RA 1:16:29 2009-Jan-08 18:28:26 INFO2 lstwait: Waiting for 37.7 secs from LST 01:15:49 to LST 01:16:27 ... 2009-Jan-08 18:28:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 37.718855509790714 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jan-08 18:28:26 START begin_task: Starting task 'waiting on wait on LST' 2009-Jan-08 18:28:26 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-08 18:29:04 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jan-08 18:29:04 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jan-08 18:29:04 LOG4 lstwait: Finished waiting 0.28 seconds late 2009-Jan-08 18:29:04 INFO3 lstwait: Finished waiting 2009-Jan-08 18:29:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jan-08 18:29:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:29:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:29:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:29:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:29:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Jan-08 18:29:04 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jan-08 18:29:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 18:29:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 18:29:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:29:04 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-08 18:29:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 18:29:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:29:04 INFO2 take_data: Starting WAPP 600-second scan: 900800170 2009-Jan-08 18:29:05 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:29:05 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-08 18:29:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:29:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0047.fits 2009-Jan-08 18:29:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:29:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0047.fits} 2009-Jan-08 18:29:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 18:29:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80946.00 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:29:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:30:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:39:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:39:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:39:06 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:39:06 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 LOG1 fixed_driftmap: New position: year = 2009.0240305346413 RA = 01:26:02.6 RA/Dec = 01:26:32.0 +08:41:13.7 2009-Jan-08 18:39:06 NOTE fixed_driftmap: Correcting ZA to 9:40:00.0 ... 2009-Jan-08 18:39:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6666755149 -CF 2009-Jan-08 18:39:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 18:39:06 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 18:39:06 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 18:39:06 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 18:39:06 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 18:39:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 18:39:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:39:06 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 18:39:06 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6666755149 -CF 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:39:06 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:39:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 18:39:06 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Jan-08 18:39:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 18:39:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:39:07 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 18:39:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:39:07 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-08 18:39:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:39:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:39:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:39:08 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:39:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 18:39:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:39:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:39:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:39:08 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:39:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:39:08 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:39:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:39:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 18:39:08 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 18:39:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 18:39:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 18:39:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:39:08 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:39:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 18:39:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:39:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:39:08 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 18:39:08 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:39:08 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 18:39:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:39:08 INFO2 take_data: Starting WAPP 1-second scan: 900800171 2009-Jan-08 18:39:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:39:08 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-08 18:39:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:39:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 18:39:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81549.00 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:39:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:39:10 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:39:10 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 18:39:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:39:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:39:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:39:10 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:39:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:39:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:39:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:39:10 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 18:39:10 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 18:39:10 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 18:39:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:39:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 18:39:10 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Jan-08 18:39:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Jan-08 18:39:10 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jan-08 18:39:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:39:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:39:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:39:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:39:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 18:39:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 18:39:11 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:39:11 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-08 18:39:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 18:39:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:39:11 INFO2 take_data: Starting WAPP 600-second scan: 900800172 2009-Jan-08 18:39:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:39:11 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-08 18:39:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:39:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:39:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 18:39:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81552.00 2009-Jan-08 18:39:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0048.fits 2009-Jan-08 18:39:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0048.fits} 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:39:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:42:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:44:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:49:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:49:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:49:12 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Jan-08 18:49:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:49:12 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2009-Jan-08 18:49:12 LOG1 fixed_driftmap: New position: year = 2009.0240497376226 RA = 01:36:10.2 RA/Dec = 01:36:39.6 +08:41:10.7 2009-Jan-08 18:49:12 NOTE fixed_driftmap: Correcting ZA to 9:40:03.0 ... 2009-Jan-08 18:49:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6675052087 -CF 2009-Jan-08 18:49:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 18:49:12 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 18:49:12 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-08 18:49:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 18:49:12 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 18:49:12 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-08 18:49:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 18:49:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 18:49:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:49:12 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 18:49:12 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6675052087 -CF 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:49:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:49:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 18:49:12 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 18:49:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:49:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 18:49:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:49:13 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:49:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:49:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:49:13 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:49:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 18:49:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:49:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:49:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:49:13 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:49:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:49:13 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:49:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:49:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 18:49:13 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 18:49:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 18:49:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 18:49:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:49:13 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:49:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 18:49:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:49:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:49:13 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 18:49:13 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:49:13 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 18:49:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:49:13 INFO2 take_data: Starting WAPP 1-second scan: 900800173 2009-Jan-08 18:49:13 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:49:13 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-08 18:49:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:49:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 18:49:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82154.00 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:49:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:49:15 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:49:15 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 18:49:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:49:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:49:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:49:15 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:49:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:49:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:49:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:49:15 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 18:49:15 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 18:49:15 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 18:49:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:49:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 18:49:15 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jan-08 18:49:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Jan-08 18:49:15 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Jan-08 18:49:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:49:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:49:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:49:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:49:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 18:49:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 18:49:16 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:49:16 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-08 18:49:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 18:49:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:49:16 INFO2 take_data: Starting WAPP 600-second scan: 900800174 2009-Jan-08 18:49:16 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:49:16 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-08 18:49:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:49:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:49:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 18:49:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82157.00 2009-Jan-08 18:49:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0049.fits 2009-Jan-08 18:49:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0049.fits} 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:55:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:56:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Jan-08 18:59:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:59:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:59:17 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:59:17 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 LOG1 fixed_driftmap: New position: year = 2009.0240689089158 RA = 01:46:16.7 RA/Dec = 01:46:46.3 +08:41:07.4 2009-Jan-08 18:59:17 NOTE fixed_driftmap: Correcting ZA to 9:40:06.3 ... 2009-Jan-08 18:59:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6684284003 -CF 2009-Jan-08 18:59:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 18:59:17 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 18:59:17 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 18:59:17 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 18:59:17 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 18:59:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 18:59:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:59:17 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 18:59:17 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6684284003 -CF 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:59:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 18:59:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 18:59:17 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Jan-08 18:59:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 18:59:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:59:17 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 18:59:17 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:59:17 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 18:59:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:59:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:59:18 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:59:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 18:59:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 18:59:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:59:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 18:59:18 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 18:59:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 18:59:18 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 18:59:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 18:59:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 18:59:18 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 18:59:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 18:59:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 18:59:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:59:18 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:59:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 18:59:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:59:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:59:18 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 18:59:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:59:18 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 18:59:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:59:18 INFO2 take_data: Starting WAPP 1-second scan: 900800175 2009-Jan-08 18:59:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:59:18 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Jan-08 18:59:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:59:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 18:59:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82759.00 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 18:59:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 18:59:20 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 18:59:20 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 18:59:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 18:59:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 18:59:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 18:59:20 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 18:59:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 18:59:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 18:59:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 18:59:20 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 18:59:20 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 18:59:20 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 18:59:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 18:59:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 18:59:20 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-Jan-08 18:59:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Jan-08 18:59:20 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Jan-08 18:59:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:59:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:59:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:59:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 18:59:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 18:59:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 18:59:21 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 18:59:21 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Jan-08 18:59:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 18:59:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 18:59:21 INFO2 take_data: Starting WAPP 600-second scan: 900800176 2009-Jan-08 18:59:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 18:59:21 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Jan-08 18:59:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 18:59:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 18:59:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 18:59:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82762.00 2009-Jan-08 18:59:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0050.fits 2009-Jan-08 18:59:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0050.fits} 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 18:59:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:05:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:09:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:09:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:09:22 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:09:22 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 LOG1 fixed_driftmap: New position: year = 2009.0240880802089 RA = 01:56:23.2 RA/Dec = 01:56:52.9 +08:41:03.7 2009-Jan-08 19:09:22 NOTE fixed_driftmap: Correcting ZA to 9:40:10.0 ... 2009-Jan-08 19:09:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6694445819 -CF 2009-Jan-08 19:09:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:09:22 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:09:22 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:09:22 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:09:22 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:09:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:09:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:09:22 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:09:22 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6694445819 -CF 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:09:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:09:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:09:22 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Jan-08 19:09:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:09:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:09:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:09:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:09:22 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:09:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:09:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:09:23 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:09:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:09:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:09:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:09:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:09:23 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:09:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:09:23 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:09:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:09:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:09:23 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:09:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:09:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:09:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:09:23 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:09:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:09:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:09:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:09:23 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:09:23 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:09:23 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:09:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:09:23 INFO2 take_data: Starting WAPP 1-second scan: 900800177 2009-Jan-08 19:09:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:09:23 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Jan-08 19:09:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:09:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:09:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83364.00 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:09:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:09:25 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:09:25 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:09:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:09:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:09:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:09:25 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:09:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:09:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:09:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:09:25 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:09:25 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:09:25 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:09:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:09:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:09:25 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Jan-08 19:09:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Jan-08 19:09:25 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Jan-08 19:09:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:09:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:09:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:09:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:09:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:09:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:09:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:09:26 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Jan-08 19:09:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:09:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:09:26 INFO2 take_data: Starting WAPP 600-second scan: 900800178 2009-Jan-08 19:09:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:09:26 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jan-08 19:09:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:09:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:09:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:09:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83367.00 2009-Jan-08 19:09:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0051.fits 2009-Jan-08 19:09:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0051.fits} 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:19:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:19:27 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:19:27 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 LOG1 fixed_driftmap: New position: year = 2009.0241072515021 RA = 02:06:29.7 RA/Dec = 02:06:59.6 +08:40:59.7 2009-Jan-08 19:19:27 NOTE fixed_driftmap: Correcting ZA to 9:40:14.0 ... 2009-Jan-08 19:19:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6705517839 -CF 2009-Jan-08 19:19:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:19:27 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:19:27 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:19:27 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:19:27 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:19:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:19:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:19:27 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:19:27 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6705517839 -CF 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:19:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:19:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:19:27 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Jan-08 19:19:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:19:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:19:27 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:19:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:19:27 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:19:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:19:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:19:28 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:19:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:19:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:19:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:19:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:19:28 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:19:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:19:28 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:19:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:19:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:19:28 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:19:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:19:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:19:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:19:28 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:19:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:19:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:19:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:19:28 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:19:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:19:28 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:19:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:19:28 INFO2 take_data: Starting WAPP 1-second scan: 900800179 2009-Jan-08 19:19:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:19:28 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Jan-08 19:19:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:19:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:19:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83969.00 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:19:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:19:30 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:19:30 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:19:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:19:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:19:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:19:30 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:19:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:19:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:19:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:19:30 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:19:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:19:30 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:19:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:19:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:19:30 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jan-08 19:19:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2009-Jan-08 19:19:30 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2009-Jan-08 19:19:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:19:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:19:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:19:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:19:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:19:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:19:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:19:31 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Jan-08 19:19:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:19:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:19:31 INFO2 take_data: Starting WAPP 600-second scan: 900800180 2009-Jan-08 19:19:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:19:31 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Jan-08 19:19:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:19:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:19:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:19:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83972.00 2009-Jan-08 19:19:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0052.fits 2009-Jan-08 19:19:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0052.fits} 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:20:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:29:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:29:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:29:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:29:32 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:29:32 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 LOG1 fixed_driftmap: New position: year = 2009.024126422795 RA = 02:16:36.2 RA/Dec = 02:17:06.3 +08:40:55.4 2009-Jan-08 19:29:32 NOTE fixed_driftmap: Correcting ZA to 9:40:18.3 ... 2009-Jan-08 19:29:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6717478541 -CF 2009-Jan-08 19:29:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:29:32 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:29:32 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:29:32 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:29:32 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:29:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:29:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:29:32 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:29:32 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6717478541 -CF 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:29:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:29:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:29:32 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Jan-08 19:29:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:29:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:29:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:29:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:29:32 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:29:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:29:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:29:33 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:29:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:29:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:29:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:29:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:29:33 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:29:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:29:33 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:29:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:29:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:29:33 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:29:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:29:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:29:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:29:33 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:29:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:29:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:29:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:29:33 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:29:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:29:33 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:29:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:29:33 INFO2 take_data: Starting WAPP 1-second scan: 900800181 2009-Jan-08 19:29:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:29:33 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jan-08 19:29:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:29:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:29:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84574.00 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:29:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:29:35 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:29:35 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:29:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:29:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:29:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:29:35 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:29:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:29:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:29:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:29:35 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:29:35 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:29:35 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:29:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:29:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:29:35 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2009-Jan-08 19:29:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2009-Jan-08 19:29:35 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2009-Jan-08 19:29:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:29:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:29:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:29:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:29:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:29:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:29:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:29:36 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Jan-08 19:29:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:29:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:29:36 INFO2 take_data: Starting WAPP 600-second scan: 900800182 2009-Jan-08 19:29:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:29:36 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Jan-08 19:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:29:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:29:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0053.fits 2009-Jan-08 19:29:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84577.00 2009-Jan-08 19:29:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0053.fits} 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:29:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:37:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:39:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:39:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:39:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:39:37 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:39:37 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 LOG1 fixed_driftmap: New position: year = 2009.0241455940882 RA = 02:26:42.8 RA/Dec = 02:27:12.9 +08:40:50.8 2009-Jan-08 19:39:37 NOTE fixed_driftmap: Correcting ZA to 9:40:22.9 ... 2009-Jan-08 19:39:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6730304593 -CF 2009-Jan-08 19:39:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:39:37 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:39:37 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:39:37 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:39:37 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:39:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:39:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:39:37 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:39:37 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6730304593 -CF 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:39:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:39:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:39:37 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Jan-08 19:39:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:39:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:39:37 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:39:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:39:37 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:39:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:39:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:39:38 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:39:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:39:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:39:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:39:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:39:38 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:39:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:39:38 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:39:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:39:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:39:38 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:39:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:39:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:39:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:39:38 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:39:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:39:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:39:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:39:38 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:39:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:39:38 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:39:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:39:38 INFO2 take_data: Starting WAPP 1-second scan: 900800183 2009-Jan-08 19:39:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:39:38 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Jan-08 19:39:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:39:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:39:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85179.00 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:39:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:39:40 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:39:40 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:39:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:39:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:39:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:39:40 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:39:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:39:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:39:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:39:40 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:39:40 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:39:40 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:39:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:39:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:39:40 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2009-Jan-08 19:39:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2009-Jan-08 19:39:40 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2009-Jan-08 19:39:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:39:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:39:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:39:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:39:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:39:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:39:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:39:41 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Jan-08 19:39:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:39:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:39:41 INFO2 take_data: Starting WAPP 600-second scan: 900800184 2009-Jan-08 19:39:41 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:39:41 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jan-08 19:39:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:39:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:39:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:39:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0054.fits 2009-Jan-08 19:39:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85182.00 2009-Jan-08 19:39:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0054.fits} 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:39:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:40:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:43:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:47:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:48:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:49:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:49:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:49:42 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jan-08 19:49:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:49:42 LOG5 end_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Jan-08 19:49:42 LOG1 fixed_driftmap: New position: year = 2009.0241647653813 RA = 02:36:49.3 RA/Dec = 02:37:19.6 +08:40:45.9 2009-Jan-08 19:49:42 NOTE fixed_driftmap: Correcting ZA to 9:40:27.8 ... 2009-Jan-08 19:49:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6743971211 -CF 2009-Jan-08 19:49:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:49:42 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:49:42 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Jan-08 19:49:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:49:42 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:49:42 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Jan-08 19:49:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:49:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:49:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:49:42 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:49:42 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6743971211 -CF 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:49:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:49:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:49:42 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:49:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:49:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:49:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:49:43 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:49:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:49:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:49:43 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:49:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:49:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:49:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:49:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:49:43 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:49:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:49:43 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:49:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:49:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:49:43 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:49:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:49:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:49:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:49:43 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:49:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:49:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:49:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:49:43 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:49:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:49:43 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:49:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:49:43 INFO2 take_data: Starting WAPP 1-second scan: 900800185 2009-Jan-08 19:49:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:49:43 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Jan-08 19:49:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:49:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:49:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85784.00 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:49:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:49:45 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:49:45 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:49:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:49:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:49:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:49:45 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:49:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:49:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:49:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:49:45 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:49:45 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:49:45 LOG5 finish_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:49:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:49:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:49:45 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Jan-08 19:49:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2009-Jan-08 19:49:45 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2009-Jan-08 19:49:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:49:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:49:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:49:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:49:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:49:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:49:46 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:49:46 LOG5 begin_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2009-Jan-08 19:49:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:49:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:49:46 INFO2 take_data: Starting WAPP 600-second scan: 900800186 2009-Jan-08 19:49:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:49:46 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Jan-08 19:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:49:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:49:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85787.00 2009-Jan-08 19:49:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0055.fits 2009-Jan-08 19:49:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0055.fits} 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:52:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:54:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:57:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:59:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-08 19:59:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:59:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:59:47 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:59:47 LOG5 end_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 LOG1 fixed_driftmap: New position: year = 2009.0241839366745 RA = 02:46:55.8 RA/Dec = 02:47:26.2 +08:40:40.7 2009-Jan-08 19:59:47 NOTE fixed_driftmap: Correcting ZA to 9:40:33.0 ... 2009-Jan-08 19:59:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6758451657 -CF 2009-Jan-08 19:59:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 19:59:47 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 19:59:47 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 19:59:47 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 19:59:47 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 19:59:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 19:59:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:59:47 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 19:59:47 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6758451657 -CF 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:59:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 19:59:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 19:59:47 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Jan-08 19:59:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 19:59:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:59:48 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 19:59:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:59:48 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 19:59:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:59:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:59:48 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:59:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 19:59:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 19:59:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:59:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 19:59:48 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 19:59:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 19:59:48 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 19:59:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 19:59:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 19:59:48 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 19:59:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 19:59:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 19:59:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:59:48 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:59:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 19:59:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:59:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:59:48 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 19:59:48 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:59:48 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 19:59:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:59:48 INFO2 take_data: Starting WAPP 1-second scan: 900800187 2009-Jan-08 19:59:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:59:48 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Jan-08 19:59:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:59:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 19:59:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86389.00 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 19:59:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 19:59:50 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 19:59:50 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 19:59:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 19:59:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 19:59:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 19:59:50 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 19:59:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 19:59:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 19:59:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 19:59:50 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 19:59:50 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 19:59:50 LOG5 finish_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 19:59:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 19:59:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 19:59:50 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2009-Jan-08 19:59:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2009-Jan-08 19:59:50 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2009-Jan-08 19:59:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:59:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:59:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:59:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 19:59:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 19:59:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 19:59:51 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 19:59:51 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2009-Jan-08 19:59:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 19:59:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 19:59:51 INFO2 take_data: Starting WAPP 600-second scan: 900800188 2009-Jan-08 19:59:51 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 19:59:51 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Jan-08 19:59:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 19:59:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 19:59:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 19:59:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86392.00 2009-Jan-08 19:59:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0056.fits 2009-Jan-08 19:59:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0056.fits} 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 19:59:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 20:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Jan-08 20:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 20:09:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:09:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:09:52 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Jan-08 20:09:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:09:52 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2009-Jan-08 20:09:52 LOG1 fixed_driftmap: New position: year = 2009.0242031079677 RA = 02:57:02.4 RA/Dec = 02:57:32.9 +08:40:35.2 2009-Jan-08 20:09:52 NOTE fixed_driftmap: Correcting ZA to 9:40:38.5 ... 2009-Jan-08 20:09:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6773717851 -CF 2009-Jan-08 20:09:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 20:09:52 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 20:09:52 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2009-Jan-08 20:09:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 20:09:52 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 20:09:52 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2009-Jan-08 20:09:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 20:09:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 20:09:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:09:52 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 20:09:52 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6773717851 -CF 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:09:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 20:09:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 20:09:52 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 20:09:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:09:53 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 20:09:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:09:53 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:09:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:09:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:09:53 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:09:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 20:09:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:09:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:09:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:09:53 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:09:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:09:53 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:09:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:09:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 20:09:53 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 20:09:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 20:09:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 20:09:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:09:53 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:09:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 20:09:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:09:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:09:53 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 20:09:53 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:09:53 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 20:09:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:09:53 INFO2 take_data: Starting WAPP 1-second scan: 900800189 2009-Jan-08 20:09:53 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:09:53 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Jan-08 20:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 20:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 594.00 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:09:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:09:55 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:09:55 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 20:09:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 20:09:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 20:09:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:09:55 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:09:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 20:09:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:09:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:09:55 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 20:09:55 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 20:09:55 LOG5 finish_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 20:09:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 20:09:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 20:09:55 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2009-Jan-08 20:09:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2009-Jan-08 20:09:55 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2009-Jan-08 20:09:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:09:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:09:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:09:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:09:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 20:09:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 20:09:56 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:09:56 LOG5 begin_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2009-Jan-08 20:09:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 20:09:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:09:56 INFO2 take_data: Starting WAPP 600-second scan: 900800190 2009-Jan-08 20:09:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:09:56 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2009-Jan-08 20:09:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 20:09:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:09:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 20:09:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 597.00 2009-Jan-08 20:09:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0057.fits 2009-Jan-08 20:09:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0057.fits} 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:09:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Jan-08 20:19:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Jan-08 20:19:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:19:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:19:57 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:19:57 LOG5 end_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG1 fixed_driftmap: New position: year = 2009.0242222792608 RA = 03:07:08.9 RA/Dec = 03:07:39.5 +08:40:29.4 2009-Jan-08 20:19:57 NOTE fixed_driftmap: Correcting ZA to 9:40:44.3 ... 2009-Jan-08 20:19:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6789740105 -CF 2009-Jan-08 20:19:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 20:19:57 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 20:19:57 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 20:19:57 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 20:19:57 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 20:19:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 20:19:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:19:57 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 20:19:57 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6789740105 -CF 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 20:19:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 20:19:57 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 20:19:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:19:57 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 20:19:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:19:57 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-Jan-08 20:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:19:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:19:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:19:58 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:19:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 20:19:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:19:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:19:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:19:58 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:19:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:19:58 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:19:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:19:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 20:19:58 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 20:19:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 20:19:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 20:19:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:19:58 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:19:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 20:19:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:19:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:19:58 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 20:19:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:19:58 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 20:19:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:19:58 INFO2 take_data: Starting WAPP 1-second scan: 900800191 2009-Jan-08 20:19:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:19:58 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Jan-08 20:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:19:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 20:19:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1199.00 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:20:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:20:00 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:20:00 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 20:20:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 20:20:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 20:20:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:20:00 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:20:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 20:20:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:20:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:20:00 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 20:20:00 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 20:20:00 LOG5 finish_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 20:20:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 20:20:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 20:20:00 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2009-Jan-08 20:20:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2009-Jan-08 20:20:00 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2009-Jan-08 20:20:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:20:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:20:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:20:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:20:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 20:20:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 20:20:01 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:20:01 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2009-Jan-08 20:20:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 20:20:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:20:01 INFO2 take_data: Starting WAPP 600-second scan: 900800192 2009-Jan-08 20:20:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:20:01 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-Jan-08 20:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 20:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:20:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 20:20:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1202.00 2009-Jan-08 20:20:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0058.fits 2009-Jan-08 20:20:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0058.fits} 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:30:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:30:02 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:30:02 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG1 fixed_driftmap: New position: year = 2009.024241450554 RA = 03:17:15.5 RA/Dec = 03:17:46.2 +08:40:23.4 2009-Jan-08 20:30:02 NOTE fixed_driftmap: Correcting ZA to 9:40:50.3 ... 2009-Jan-08 20:30:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 9.6806487356 -CF 2009-Jan-08 20:30:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Jan-08 20:30:02 START begin_task: Starting task 'WAPP calibration' 2009-Jan-08 20:30:02 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jan-08 20:30:02 START begin_task: Starting task 'selecting calibration type' 2009-Jan-08 20:30:02 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jan-08 20:30:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jan-08 20:30:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:30:02 START begin_task: Starting task 'waiting on setcal' 2009-Jan-08 20:30:02 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 9.6806487356 -CF 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jan-08 20:30:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jan-08 20:30:02 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jan-08 20:30:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:30:02 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jan-08 20:30:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:30:02 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-Jan-08 20:30:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:30:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:30:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:30:03 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:30:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jan-08 20:30:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jan-08 20:30:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:30:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jan-08 20:30:03 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jan-08 20:30:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jan-08 20:30:03 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jan-08 20:30:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jan-08 20:30:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jan-08 20:30:03 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jan-08 20:30:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jan-08 20:30:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jan-08 20:30:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:30:03 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:30:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jan-08 20:30:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:30:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:30:03 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Jan-08 20:30:03 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:30:03 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Jan-08 20:30:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:30:03 INFO2 take_data: Starting WAPP 1-second scan: 900800193 2009-Jan-08 20:30:03 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:30:03 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2009-Jan-08 20:30:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:30:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Jan-08 20:30:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1804.00 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:30:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jan-08 20:30:05 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2009-Jan-08 20:30:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jan-08 20:30:05 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Jan-08 20:30:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jan-08 20:30:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jan-08 20:30:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jan-08 20:30:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jan-08 20:30:05 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jan-08 20:30:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jan-08 20:30:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jan-08 20:30:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jan-08 20:30:06 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jan-08 20:30:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jan-08 20:30:06 LOG5 finish_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jan-08 20:30:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jan-08 20:30:06 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2009-Jan-08 20:30:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:30:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:30:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:30:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 D Brisbin & R Giovanelli 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Jan-08 20:30:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Jan-08 20:30:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Jan-08 20:30:06 LOG5 begin_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Jan-08 20:30:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jan-08 20:30:06 INFO2 take_data: Starting WAPP 600-second scan: 900800194 2009-Jan-08 20:30:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jan-08 20:30:06 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2009-Jan-08 20:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 D Brisbin & R Giovanelli' 2009-Jan-08 20:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jan-08 20:30:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1807.00 2009-Jan-08 20:30:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090108.a2010.0059.fits 2009-Jan-08 20:30:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090108.a2010.0059.fits} 2009-Jan-08 20:30:08 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Jan-08 20:30:08 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Jan-08 20:30:08 WARNING abort_task: WARNING abort requested! 2009-Jan-08 20:30:08 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2009-Jan-08 20:30:08 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2009-Jan-08 20:30:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2009-Jan-08 20:30:08 LOG5 end_task: Level: (3) ID = <10253> Status = 1 0 0 0 abort 2009-Jan-08 20:30:08 LOG4 stop_backends: Calling 'stop_backends' 2009-Jan-08 20:30:08 START begin_task: Starting task 'stopping the WAPPs' 2009-Jan-08 20:30:08 LOG5 begin_task: Level: (3) ID = <10254> Status = 1 0 0 0 abort 2009-Jan-08 20:30:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Jan-08 20:30:08 INFO1 stop_wapp: Stopping the WAPPs 2009-Jan-08 20:30:08 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Jan-08 20:30:08 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Jan-08 20:30:08 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Jan-08 20:30:08 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Jan-08 20:30:08 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Jan-08 20:30:08 LOG5 begin_task: Level: (4) ID = <10255> Status = 1 0 0 0 abort 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1520.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1770.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1870.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1970.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Jan-08 20:30:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Jan-08 20:30:09 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2009-Jan-08 20:30:09 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2009-Jan-08 20:30:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jan-08 20:30:09 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2009-Jan-08 20:30:09 LOG5 end_task: Level: (4) ID = <10255> Status = 1 0 0 0 abort 2009-Jan-08 20:30:09 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2009-Jan-08 20:30:09 LOG5 end_task: Level: (3) ID = <10254> Status = 1 0 0 0 abort 2009-Jan-08 20:30:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2009-Jan-08 20:30:09 LOG5 end_task: Level: (2) ID = <10252> Status = 1 0 0 0 abort 2009-Jan-08 20:30:10 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jan-08 20:30:10 LOG5 finish_task: Level: (1) ID = <10104> Status = 1 0 0 0 abort 2009-Jan-08 20:30:10 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jan-08 20:30:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jan-08 20:30:10 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jan-08 20:30:10 LOG5 end_task: Level: (1) ID = <10104> Status = 1 0 0 0 abort 2009-Jan-08 20:30:11 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 12 dumps! 2009-Jan-08 20:30:16 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Jan-08 20:30:16 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Jan-08 20:30:16 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2009-Jan-08 20:30:16 LOG3 vw_send: To DATATAKING: mvdata a2010 2009-Jan-08 20:30:16 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Jan-08 20:30:16 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Jan-08 20:30:16 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Jan-08 20:30:16 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Jan-08 20:30:16 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2009-Jan-08 20:30:16 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Jan-08 20:30:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:30:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jan-08 20:30:18 LOG3 exec_msg: Closing socket