2008-Jan-14 00:34:49 BEGIN executive: CIMA executive starting ... 2008-Jan-14 00:34:49 NOTE executive: STARTING NEW CIMA SESSION 2008-Jan-14 00:34:49 INFO1 executive: Using CIMA version 2.3.xx 'unusable' from 2008-01-11 21:02 2008-Jan-14 00:34:49 INFO4 executive: This is an ON-LINE session 2008-Jan-14 00:34:49 INFO4 executive: This is a LOCAL session 2008-Jan-14 00:34:49 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Jan-14 00:34:49 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'ugradalfa' 2008-Jan-14 00:34:49 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog' 2008-Jan-14 00:34:49 LOG2 log_preferences: Currently applied preferences: 2008-Jan-14 00:34:49 LOG2 log_preferences: prefs(dailylog) = general 2008-Jan-14 00:34:49 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Jan-14 00:34:49 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Jan-14 00:34:49 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(logcolours) = full 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(displayformat) = long 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(logformat) = new 2008-Jan-14 00:34:50 LOG2 log_preferences: prefs(fontsize) = 3 2008-Jan-14 00:34:50 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Jan-14 00:34:50 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Jan-14 00:34:50 ALERT executive: CIMA executive ready 2008-Jan-14 00:34:51 NOTE frontend: CIMA frontend ready 2008-Jan-14 00:34:53 LOG4 got_cormsg: From DATATAKING: vw% setup 2008-Jan-14 00:34:59 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Jan-14 00:34:59 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Jan-14 00:34:59 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Jan-14 00:34:59 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Jan-14 00:34:59 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jan-14 00:34:59 NOTE select_receiver: Starting to select receiver ALFA 2008-Jan-14 00:34:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jan-14 00:34:59 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jan-14 00:34:59 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jan-14 00:34:59 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jan-14 00:34:59 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jan-14 00:34:59 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jan-14 00:34:59 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Jan-14 00:34:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:34:59 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jan-14 00:34:59 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Jan-14 00:35:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Jan-14 00:35:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:35:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:35:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:35:10 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jan-14 00:35:10 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jan-14 00:35:10 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jan-14 00:35:10 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jan-14 00:35:10 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jan-14 00:35:10 NOTE restart_wapp: Restarting all WAPPs 2008-Jan-14 00:35:10 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jan-14 00:35:10 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jan-14 00:35:10 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Jan-14 00:35:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:35:13 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jan-14 00:35:13 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jan-14 00:35:13 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jan-14 00:35:13 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jan-14 00:36:02 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc ' to executive ... 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD togs.conf} 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {CATALOG a2010.cat} 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {GOTO galfasrc} 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 7 {ALFAANGLE 19} 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 8 {WAITTRACK} 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Jan-14 00:36:02 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc 1 1 6 2008-Jan-14 00:36:02 LOG4 run_command_file: Calling 'run_command_file command_galfasrc 1 1 6' 2008-Jan-14 00:36:02 BEGIN begin_task: Starting task 'running command file 'command_galfasrc'' 2008-Jan-14 00:36:02 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jan-14 00:36:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc' ...} 2008-Jan-14 00:36:02 NOTE run_command_file: Starting execution of command file 'command_galfasrc' from line 1 2008-Jan-14 00:36:02 COMMAND run_command_line: EXECUTING command 4: 'LOAD togs.conf' 2008-Jan-14 00:36:02 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jan-14 00:36:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 00:36:02 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jan-14 00:36:02 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 00:36:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2008-Jan-14 00:36:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 00:36:04 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 00:36:04 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jan-14 00:36:04 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 00:36:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 00:36:04 INFO1 config_iflo: Selecting receiver ALFA 2008-Jan-14 00:36:04 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Jan-14 00:36:04 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2008-Jan-14 00:36:04 START begin_task: Starting task 'selecting receiver ALFA' 2008-Jan-14 00:36:04 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Jan-14 00:36:04 NOTE select_receiver: Starting to select receiver ALFA 2008-Jan-14 00:36:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Jan-14 00:36:04 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Jan-14 00:36:04 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Jan-14 00:36:05 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Jan-14 00:36:05 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Jan-14 00:36:05 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Jan-14 00:36:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:36:05 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Jan-14 00:36:05 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Jan-14 00:36:05 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Jan-14 00:36:05 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Jan-14 00:36:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Jan-14 00:36:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:36:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:36:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:36:05 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:36:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:36:05 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:36:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Jan-14 00:36:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Jan-14 00:36:05 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Jan-14 00:36:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 00:36:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:36:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 00:36:05 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Jan-14 00:36:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:36:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:36:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 00:36:22 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 00:36:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 00:36:22 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 00:36:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:36:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 00:36:22 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 00:36:22 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 00:36:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 00:36:22 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 00:36:22 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 00:36:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 00:36:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:36:22 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 00:36:22 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:36:22 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 00:36:22 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 00:36:22 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 00:36:22 LOG5 finish_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 00:36:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:36:22 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 00:36:22 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 00:36:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 00:36:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:36:23 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:36:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:36:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:36:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:36:23 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:36:23 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 00:36:23 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:36:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 00:36:23 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 COMMAND run_command_line: EXECUTING command 5: 'CATALOG a2010.cat' 2008-Jan-14 00:36:23 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2008-Jan-14 00:36:23 COMMAND run_command_line: EXECUTING command 6: 'GOTO galfasrc' 2008-Jan-14 00:36:23 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2008-Jan-14 00:36:23 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2008-Jan-14 00:36:23 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2008-Jan-14 00:36:23 LOG3 track_source: Calling 'track_source galfasrc 074200.0 +260212 J 0.0 0.0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Jan-14 00:36:23 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 00:36:23 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2008-Jan-14 00:36:23 INFO1 track_source: Starting to track galfasrc 2008-Jan-14 00:36:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2008-Jan-14 00:36:23 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 00:36:23 LOG3 vw_send: To DATATAKING: pnt tr 074200.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:36:23 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:36:23 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 00:36:23 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:36:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 00:36:23 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2008-Jan-14 00:36:23 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 DONE finish_task: DONE finished tracking: source 'galfasrc' 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:36:23 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2008-Jan-14 00:36:23 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 COMMAND run_command_line: EXECUTING command 7: 'ALFAANGLE 19' 2008-Jan-14 00:36:23 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Jan-14 00:36:23 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:36:23 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jan-14 00:36:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:36:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:36:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 00:36:24 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 00:36:24 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 00:36:24 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jan-14 00:36:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:36:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0001.fits 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2008-Jan-14 00:36:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 00:36:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:36:24 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080114.a2010.0001.fits} 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: pnt tr 074200.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:36:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:36:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:36:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:36:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:36:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 00:36:24 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2008-Jan-14 00:36:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:36:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:36:24 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jan-14 00:36:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:36:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:36:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:36:24 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Jan-14 00:36:24 COMMAND run_command_line: EXECUTING command 8: 'WAITTRACK' 2008-Jan-14 00:36:24 BEGIN begin_task: Starting task 'waiting on telescope' 2008-Jan-14 00:36:25 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Jan-14 00:36:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jan-14 00:36:25 LOG3 waittrk: Start waittrk 5 2008-Jan-14 00:36:25 START begin_task: Starting task 'waiting on telescope movement' 2008-Jan-14 00:36:25 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jan-14 00:36:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jan-14 00:36:30 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2008-Jan-14 00:36:30 START begin_task: Starting task 'waiting on telescope on source' 2008-Jan-14 00:36:30 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jan-14 00:37:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jan-14 00:37:07 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2008-Jan-14 00:37:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:37:07 INFO2 waittrk: Now tracking galfasrc 2008-Jan-14 00:37:07 LOG4 waittrk: Current telescope position: Az = 180.24 ZA = 7.69 2008-Jan-14 00:37:07 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jan-14 00:37:07 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Jan-14 00:37:07 DONE finish_task: DONE finished waiting: telescope on source 2008-Jan-14 00:37:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:37:07 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jan-14 00:37:07 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2008-Jan-14 00:37:07 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Jan-14 00:37:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Jan-14 00:37:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 00:37:08 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Jan-14 00:37:08 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Jan-14 00:37:08 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2008-Jan-14 00:37:08 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Jan-14 00:37:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Jan-14 00:37:08 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 00:37:08 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 00:37:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 00:37:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:37:08 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 00:37:08 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 00:37:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:37:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:37:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 00:37:08 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 00:37:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 00:37:08 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 00:37:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:37:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 00:37:08 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:37:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:37:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:37:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:37:08 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080114.a2010.0001.fits' is empty! 2008-Jan-14 00:37:08 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Jan-14 00:37:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 00:37:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 00:37:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 00:37:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 00:37:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:37:08 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Jan-14 00:37:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:37:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:37:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:37:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:37:09 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2008-Jan-14 00:37:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jan-14 00:37:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:37:09 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Jan-14 00:37:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:37:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:37:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:37:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:37:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:37:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:37:09 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Jan-14 00:37:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:37:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:37:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:37:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:37:12 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:37:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:37:12 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:37:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 0 0 2008-Jan-14 00:37:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 0 0 2008-Jan-14 00:37:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 0 0 2008-Jan-14 00:37:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 0 0 2008-Jan-14 00:37:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:37:12 LOG5 begin_task: Level: (5) ID = <10027> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 0 0' 2008-Jan-14 00:37:12 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 9 6 dB 2008-Jan-14 00:37:12 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 4 4 dB 2008-Jan-14 00:37:12 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 6 3 dB 2008-Jan-14 00:37:12 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 2 dB 2008-Jan-14 00:37:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:37:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:37:12 LOG5 end_task: Level: (5) ID = <10027> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 INFO2 wapp_adjpwr: WAPP power: (0.927 1.033) (1.078 1.106) (1.018 0.947) (0.968 0.987) 2008-Jan-14 00:37:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:37:12 LOG5 finish_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:37:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:37:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:37:12 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 00:37:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:37:12 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Jan-14 00:37:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:37:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:37:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:37:12 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Jan-14 00:37:13 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Jan-14 00:37:13 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Jan-14 00:37:13 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 00:37:13 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:37:13 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:37:13 LOG2 antvel: Parameters to Doppler: Topocentric 16632 2008 14 0.0 2008-Jan-14 00:37:13 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:37:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 00:37:13 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 00:37:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:37:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:37:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:37:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:13 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:37:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:37:13 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jan-14 00:37:13 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:37:13 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.705221 2008.0384006388319 18.999933 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 0 7.699999999999572 26.036666666666669 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 1 7.701238617785889 25.931857569871855 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 2 7.706369112746797 26.001018839165560 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 3 7.705192277581032 26.105984956889326 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 4 7.698723971443873 26.141436100135021 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 5 7.693568945924026 26.071285923809342 2008-Jan-14 00:37:13 LOG4 log_alfabeam: ALFABEAM 6 7.694906531142837 25.966684237520397 2008-Jan-14 00:37:13 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400001 2008-Jan-14 00:37:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:37:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:37:13 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jan-14 00:37:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:37:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:37:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16634.00 2008-Jan-14 00:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:37:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:37:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:37:24 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2008-Jan-14 00:37:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:37:24 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Jan-14 00:37:24 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Jan-14 00:37:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Jan-14 00:37:24 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 00:37:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:37:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:37:24 LOG2 antvel: Parameters to Doppler: Topocentric 16644 2008 14 0.0 2008-Jan-14 00:37:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:37:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 00:37:24 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 00:37:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:37:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:37:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:37:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:37:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:37:24 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jan-14 00:37:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:37:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.708564 2008.038401019089 18.999933 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000013749 26.036666666666825 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 1 7.701286990004228 25.931963584905581 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 2 7.706385473552155 26.001554220567566 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 3 7.705160131582502 26.106419506585887 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 4 7.698675532514176 26.141326941025824 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 5 7.693553080689981 26.070745349277022 2008-Jan-14 00:37:24 LOG4 log_alfabeam: ALFABEAM 6 7.694938963852363 25.966257986232044 2008-Jan-14 00:37:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400002 2008-Jan-14 00:37:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:37:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:37:25 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Jan-14 00:37:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:37:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:37:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16646.00 2008-Jan-14 00:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:37:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:37:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:37:36 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2008-Jan-14 00:37:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:37:36 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Jan-14 00:37:36 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Jan-14 00:37:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Jan-14 00:37:36 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 00:37:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:37:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:37:36 LOG2 antvel: Parameters to Doppler: Topocentric 16656 2008 14 0.0 2008-Jan-14 00:37:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:37:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 00:37:36 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 00:37:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:37:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:37:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:37:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:37:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:37:36 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Jan-14 00:37:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:37:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.711906 2008.038401399346 18.999933 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000053 26.036666666666676 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 1 7.701335298222324 25.932073625117120 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 2 7.706401582976680 26.002090817816246 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 3 7.705127793252764 26.106851228386240 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 4 7.698627160610742 26.141213753733510 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 5 7.693537471616739 26.070203638244603 2008-Jan-14 00:37:36 LOG4 log_alfabeam: ALFABEAM 6 7.694971580779002 25.965834606779133 2008-Jan-14 00:37:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400003 2008-Jan-14 00:37:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:37:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:37:37 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Jan-14 00:37:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:37:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:37:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16658.00 2008-Jan-14 00:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:37:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:37:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:37:48 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2008-Jan-14 00:37:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:37:48 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Jan-14 00:37:48 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Jan-14 00:37:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Jan-14 00:37:48 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 00:37:48 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:37:48 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:37:48 LOG2 antvel: Parameters to Doppler: Topocentric 16668 2008 14 0.0 2008-Jan-14 00:37:48 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:37:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 00:37:48 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 00:37:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:37:48 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:37:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:37:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:48 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:37:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:37:48 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jan-14 00:37:48 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:37:48 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.715249 2008.038401779603 18.999933 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000515 26.036666666666676 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 1 7.701383566058459 25.932187743898801 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 2 7.706417448912153 26.002628893122157 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 3 7.705095246827848 26.107280333056615 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 4 7.698578832122745 26.141096483680347 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 5 7.693522111035897 26.069660526563833 2008-Jan-14 00:37:48 LOG4 log_alfabeam: ALFABEAM 6 7.695004397833296 25.965413891534215 2008-Jan-14 00:37:48 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400004 2008-Jan-14 00:37:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:37:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:37:49 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Jan-14 00:37:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:37:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:37:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:37:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:37:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16670.00 2008-Jan-14 00:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:38:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:38:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:38:00 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Jan-14 00:38:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:38:00 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Jan-14 00:38:00 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Jan-14 00:38:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Jan-14 00:38:00 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 00:38:00 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:38:00 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:38:00 LOG2 antvel: Parameters to Doppler: Topocentric 16680 2008 14 0.0 2008-Jan-14 00:38:00 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:38:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 00:38:00 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 00:38:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:38:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:38:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:38:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:00 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:38:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:38:00 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jan-14 00:38:00 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:38:00 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.718591 2008.0384021598602 18.999933 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000155 26.036666666666676 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 1 7.701431759350473 25.932305859217838 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 2 7.706433060175087 26.003168065272295 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 3 7.705062515396206 26.107706517202505 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 4 7.698530581250426 26.140975215482730 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 5 7.693507009703406 26.069116399547326 2008-Jan-14 00:38:00 LOG4 log_alfabeam: ALFABEAM 6 7.695037391688376 25.964996137000256 2008-Jan-14 00:38:00 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400005 2008-Jan-14 00:38:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:38:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:38:01 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Jan-14 00:38:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:38:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:38:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16682.00 2008-Jan-14 00:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:38:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:38:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:38:12 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2008-Jan-14 00:38:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:38:12 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2008-Jan-14 00:38:12 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Jan-14 00:38:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Jan-14 00:38:12 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 00:38:12 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:38:12 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:38:12 LOG2 antvel: Parameters to Doppler: Topocentric 16692 2008 14 0.0 2008-Jan-14 00:38:12 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:38:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 00:38:12 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 00:38:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:38:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:38:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:38:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:12 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:38:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:38:12 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jan-14 00:38:12 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:38:12 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.721934 2008.0384025401172 18.999933 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000014 26.036666666666676 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 1 7.701479901676681 25.932428026697846 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 2 7.706448424500843 26.003708597221951 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 3 7.705029583067696 26.108129990098625 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 4 7.698482384392957 26.140849892329864 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 5 7.693492160071949 26.068570992326094 2008-Jan-14 00:38:12 LOG4 log_alfabeam: ALFABEAM 6 7.695070578343961 25.964581137056882 2008-Jan-14 00:38:12 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400006 2008-Jan-14 00:38:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:38:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:38:13 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jan-14 00:38:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:38:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:38:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16694.00 2008-Jan-14 00:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:38:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:38:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:38:24 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2008-Jan-14 00:38:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:38:24 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Jan-14 00:38:24 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Jan-14 00:38:24 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Jan-14 00:38:24 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 00:38:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:38:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:38:24 LOG2 antvel: Parameters to Doppler: Topocentric 16704 2008 14 0.0 2008-Jan-14 00:38:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:38:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 00:38:24 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 00:38:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:38:24 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:38:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:38:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:38:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:38:24 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jan-14 00:38:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:38:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.725276 2008.0384029203742 18.999933 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000181 26.036666666666676 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 1 7.701527959000610 25.932554156907603 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 2 7.706463531176550 26.004250105554494 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 3 7.704996473293923 26.108550453588126 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 4 7.698434275630639 26.140720606240219 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 5 7.693477572430385 26.068024692247612 2008-Jan-14 00:38:24 LOG4 log_alfabeam: ALFABEAM 6 7.695103934144549 25.964169182885648 2008-Jan-14 00:38:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400007 2008-Jan-14 00:38:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:38:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:38:25 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jan-14 00:38:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:38:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:38:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16706.00 2008-Jan-14 00:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:38:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:38:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:38:36 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Jan-14 00:38:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:38:36 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2008-Jan-14 00:38:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jan-14 00:38:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 00:38:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 00:38:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:38:36 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jan-14 00:38:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:38:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 00:38:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:38:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:38:36 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Jan-14 00:38:36 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Jan-14 00:38:36 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Jan-14 00:38:36 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 00:38:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:38:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:38:36 LOG2 antvel: Parameters to Doppler: Topocentric 16716 2008 14 0.0 2008-Jan-14 00:38:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:38:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 00:38:36 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 00:38:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:38:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:38:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:38:36 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jan-14 00:38:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:38:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.728619 2008.0384033006312 18.999933 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 0 7.699999999999999 26.036666666666676 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 1 7.701575954870842 25.932684307703099 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 2 7.706478387801690 26.004792853956676 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 3 7.704963170070737 26.108968115440138 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 4 7.698386231391027 26.140587298168427 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 5 7.693463239369348 26.067477233735076 2008-Jan-14 00:38:36 LOG4 log_alfabeam: ALFABEAM 6 7.695137475195705 25.963760069888270 2008-Jan-14 00:38:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400008 2008-Jan-14 00:38:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:38:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:38:37 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jan-14 00:38:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:38:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:38:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16718.00 2008-Jan-14 00:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:38:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:38:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:38:48 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2008-Jan-14 00:38:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:38:48 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Jan-14 00:38:48 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Jan-14 00:38:48 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Jan-14 00:38:48 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 00:38:48 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:38:48 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:38:48 LOG2 antvel: Parameters to Doppler: Topocentric 16728 2008 14 0.0 2008-Jan-14 00:38:48 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:38:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 00:38:48 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 00:38:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:38:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:38:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:38:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:48 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:38:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:38:48 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jan-14 00:38:48 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:38:48 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.731961 2008.0384036808882 18.999933 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000152 26.036666666666676 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 1 7.701623855395970 25.932818382336389 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 2 7.706492984132997 26.005336457086262 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 3 7.704929697185681 26.109382682937742 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 4 7.698338285603083 26.140450067449663 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 5 7.693449170698830 26.066929005887935 2008-Jan-14 00:38:48 LOG4 log_alfabeam: ALFABEAM 6 7.695171177524925 25.963354083733151 2008-Jan-14 00:38:48 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400009 2008-Jan-14 00:38:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:38:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:38:49 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Jan-14 00:38:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:38:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:38:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:38:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16730.00 2008-Jan-14 00:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:39:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:39:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:39:00 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2008-Jan-14 00:39:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:39:00 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Jan-14 00:39:00 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Jan-14 00:39:00 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Jan-14 00:39:00 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 00:39:00 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:39:00 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:39:00 LOG2 antvel: Parameters to Doppler: Topocentric 16740 2008 14 0.0 2008-Jan-14 00:39:00 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:39:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 00:39:00 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 00:39:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:39:00 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:39:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:39:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:00 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:39:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:39:00 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jan-14 00:39:00 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:39:00 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.735304 2008.0384040611455 18.999933 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000115 26.036666666666662 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 1 7.701671684094744 25.932956440900707 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 2 7.706507327632250 26.005881179350940 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 3 7.704896038525578 26.109794362329826 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 4 7.698290414726084 26.140308852799016 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 5 7.693435359149103 26.066379742431774 2008-Jan-14 00:39:00 LOG4 log_alfabeam: ALFABEAM 6 7.695205057344285 25.962951021359885 2008-Jan-14 00:39:00 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400010 2008-Jan-14 00:39:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:39:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:39:01 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Jan-14 00:39:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:39:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:39:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16742.00 2008-Jan-14 00:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:39:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:39:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:39:12 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Jan-14 00:39:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:39:12 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Jan-14 00:39:12 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Jan-14 00:39:12 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Jan-14 00:39:12 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 00:39:12 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:39:12 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:39:12 LOG2 antvel: Parameters to Doppler: Topocentric 16752 2008 14 0.0 2008-Jan-14 00:39:12 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:39:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 00:39:12 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 00:39:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:39:12 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:39:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:39:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:12 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:39:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:39:12 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Jan-14 00:39:12 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:39:12 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.738646 2008.0384044414025 18.999933 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000033 26.036666666666676 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 1 7.701719407244307 25.933098379427893 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 2 7.706521408531072 26.006426633762938 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 3 7.704862218195093 26.110202866528486 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 4 7.698242652513145 26.140163760767848 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 5 7.693421814046180 26.065829833932920 2008-Jan-14 00:39:12 LOG4 log_alfabeam: ALFABEAM 6 7.695239090382247 25.962551162744724 2008-Jan-14 00:39:12 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400011 2008-Jan-14 00:39:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:39:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:39:13 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Jan-14 00:39:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:39:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:39:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16754.00 2008-Jan-14 00:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:39:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:39:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:39:24 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Jan-14 00:39:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:39:24 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2008-Jan-14 00:39:24 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Jan-14 00:39:24 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Jan-14 00:39:24 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 00:39:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03840 J 2008-Jan-14 00:39:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:39:24 LOG2 antvel: Parameters to Doppler: Topocentric 16764 2008 14 0.0 2008-Jan-14 00:39:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:39:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 00:39:24 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 00:39:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:39:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:39:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:39:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:39:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:39:24 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Jan-14 00:39:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:39:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.741989 2008.0384048216595 18.999933 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000039 26.036666666666662 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 1 7.701767048331861 25.933244260256124 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 2 7.706535234153755 26.006973085440919 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 3 7.704828219971804 26.110608400245205 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 4 7.698194975456908 26.140014727823704 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 5 7.693408528260810 26.065279013429592 2008-Jan-14 00:39:24 LOG4 log_alfabeam: ALFABEAM 6 7.695273292956705 25.962154306383734 2008-Jan-14 00:39:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400012 2008-Jan-14 00:39:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:39:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:39:25 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Jan-14 00:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:39:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:39:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16766.00 2008-Jan-14 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:39:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:39:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:39:36 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Jan-14 00:39:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:39:36 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Jan-14 00:39:36 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Jan-14 00:39:36 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Jan-14 00:39:36 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 00:39:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:39:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:39:36 LOG2 antvel: Parameters to Doppler: Topocentric 16776 2008 14 0.0 2008-Jan-14 00:39:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:39:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 00:39:36 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 00:39:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:39:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:39:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:39:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:39:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:39:36 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jan-14 00:39:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:39:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.745331 2008.0384052019165 18.999933 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000047 26.036666666666676 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 1 7.701814573826231 25.933393972308419 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 2 7.706548795211867 26.007520146033773 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 3 7.704794068258304 26.111010682197414 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 4 7.698147417111690 26.139861867619096 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 5 7.693395510631338 26.064727672668553 2008-Jan-14 00:39:36 LOG4 log_alfabeam: ALFABEAM 6 7.695307640516088 25.961760726395145 2008-Jan-14 00:39:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400013 2008-Jan-14 00:39:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:39:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:39:37 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Jan-14 00:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:39:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:39:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16778.00 2008-Jan-14 00:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:39:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:39:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:39:48 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2008-Jan-14 00:39:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:39:48 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2008-Jan-14 00:39:48 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Jan-14 00:39:48 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Jan-14 00:39:48 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 00:39:48 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:39:48 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:39:48 LOG2 antvel: Parameters to Doppler: Topocentric 16788 2008 14 0.0 2008-Jan-14 00:39:48 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:39:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 00:39:48 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 00:39:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:39:48 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:39:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:39:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:48 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:39:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:39:48 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Jan-14 00:39:48 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:39:48 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.748673 2008.0384055821737 18.999933 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000027 26.036666666666672 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 1 7.701861993009005 25.933547533655833 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 2 7.706562094948910 26.008067917355234 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 3 7.704759757014268 26.111409796592611 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 4 7.698099968185489 26.139705161825933 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 5 7.693382757946450 26.064175709257501 2008-Jan-14 00:39:48 LOG4 log_alfabeam: ALFABEAM 6 7.695342139139241 25.961370339184093 2008-Jan-14 00:39:48 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400014 2008-Jan-14 00:39:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:39:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:39:49 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Jan-14 00:39:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:39:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:39:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:39:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:39:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16790.00 2008-Jan-14 00:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:40:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:40:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:40:00 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Jan-14 00:40:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:40:00 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Jan-14 00:40:00 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Jan-14 00:40:00 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Jan-14 00:40:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 00:40:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 00:40:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 00:40:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:40:00 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Jan-14 00:40:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:40:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:40:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:40:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:40:00 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Jan-14 00:40:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jan-14 00:40:00 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Jan-14 00:40:00 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Jan-14 00:40:00 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 00:40:00 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:40:00 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:40:00 LOG2 antvel: Parameters to Doppler: Topocentric 16800 2008 14 0.0 2008-Jan-14 00:40:00 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:40:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 00:40:00 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 00:40:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:40:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:40:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:40:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:00 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:40:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:40:00 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Jan-14 00:40:00 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:40:00 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.752016 2008.0384059624307 18.999933 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000016 26.036666666666662 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 1 7.701909315080761 25.933704965805489 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 2 7.706575136381752 26.008616501990687 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 3 7.704725280050076 26.111805824955148 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 4 7.698052619469237 26.139544588680678 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 5 7.693370267225277 26.063623020097044 2008-Jan-14 00:40:00 LOG4 log_alfabeam: ALFABEAM 6 7.695376795048386 25.960983063864681 2008-Jan-14 00:40:00 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400015 2008-Jan-14 00:40:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:40:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:40:01 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Jan-14 00:40:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:40:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:40:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16802.00 2008-Jan-14 00:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:40:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:40:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:40:12 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Jan-14 00:40:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:40:12 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Jan-14 00:40:12 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Jan-14 00:40:12 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Jan-14 00:40:12 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 00:40:12 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:40:12 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:40:12 LOG2 antvel: Parameters to Doppler: Topocentric 16812 2008 14 0.0 2008-Jan-14 00:40:12 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:40:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 00:40:12 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 00:40:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:40:12 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:40:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:40:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:12 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:40:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:40:12 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Jan-14 00:40:12 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:40:12 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.755358 2008.0384063426877 18.999933 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000061 26.036666666666676 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 1 7.701956506840049 25.933866147257497 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 2 7.706587910948774 26.009165510075512 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 3 7.704690662178074 26.112198495011590 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 4 7.698005404177919 26.139380272240651 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 5 7.693358046569080 26.063069998166810 2008-Jan-14 00:40:12 LOG4 log_alfabeam: ALFABEAM 6 7.695411583307799 25.960599165486759 2008-Jan-14 00:40:12 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400016 2008-Jan-14 00:40:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:40:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:40:13 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Jan-14 00:40:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:40:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:40:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16814.00 2008-Jan-14 00:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:40:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:40:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:40:24 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Jan-14 00:40:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:40:24 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2008-Jan-14 00:40:24 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Jan-14 00:40:24 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Jan-14 00:40:24 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 00:40:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:40:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:40:24 LOG2 antvel: Parameters to Doppler: Topocentric 16824 2008 14 0.0 2008-Jan-14 00:40:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:40:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 00:40:24 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 00:40:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:40:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:40:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:40:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:40:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:40:24 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Jan-14 00:40:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:40:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.758701 2008.0384067229447 18.999933 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000047 26.036666666666676 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 1 7.702003591687906 25.934031146012991 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 2 7.706600425621414 26.009715208458928 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 3 7.704655886905909 26.112588007533883 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 4 7.697958298893133 26.139212143302320 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 5 7.693346089206446 26.062516374833677 2008-Jan-14 00:40:24 LOG4 log_alfabeam: ALFABEAM 6 7.695446520499793 25.960218446538409 2008-Jan-14 00:40:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400017 2008-Jan-14 00:40:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:40:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:40:25 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Jan-14 00:40:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:40:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:40:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Jan-14 00:40:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16826.00 2008-Jan-14 00:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:40:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:40:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:40:36 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Jan-14 00:40:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:40:36 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Jan-14 00:40:36 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Jan-14 00:40:36 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Jan-14 00:40:36 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 00:40:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:40:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:40:36 LOG2 antvel: Parameters to Doppler: Topocentric 16836 2008 14 0.0 2008-Jan-14 00:40:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:40:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 00:40:36 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 00:40:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:40:36 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:40:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:40:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:40:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:40:36 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Jan-14 00:40:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:40:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.762043 2008.0384071032017 18.999933 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000074 26.036666666666655 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 1 7.702050536669804 25.934199833802552 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 2 7.706612672325135 26.010265206621352 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 3 7.704620979294833 26.112974096435874 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 4 7.697911336576502 26.139040332676014 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 5 7.693334402745788 26.061962543541480 2008-Jan-14 00:40:36 LOG4 log_alfabeam: ALFABEAM 6 7.695481581457464 25.959841165855945 2008-Jan-14 00:40:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400018 2008-Jan-14 00:40:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:40:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:40:37 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Jan-14 00:40:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:40:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:40:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16838.00 2008-Jan-14 00:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:40:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:40:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:40:48 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2008-Jan-14 00:40:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:40:48 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2008-Jan-14 00:40:48 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Jan-14 00:40:48 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Jan-14 00:40:48 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 00:40:48 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:40:48 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:40:48 LOG2 antvel: Parameters to Doppler: Topocentric 16848 2008 14 0.0 2008-Jan-14 00:40:48 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:40:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 00:40:48 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 00:40:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:40:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:40:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:48 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:40:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:40:48 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Jan-14 00:40:48 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:40:48 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.765386 2008.038407483459 18.999933 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 0 7.699999999999990 26.036666666666676 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 1 7.702097365148711 25.934372280918819 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 2 7.706624657887203 26.010815772083259 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 3 7.704585922744332 26.113356960866717 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 4 7.697864493848391 26.138864768862984 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 5 7.693322980561655 26.061408235010347 2008-Jan-14 00:40:48 LOG4 log_alfabeam: ALFABEAM 6 7.695516782868338 25.959467127573163 2008-Jan-14 00:40:48 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400019 2008-Jan-14 00:40:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:40:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:40:49 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Jan-14 00:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:40:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:40:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:40:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16850.00 2008-Jan-14 00:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:41:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:41:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:41:00 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Jan-14 00:41:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:41:00 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Jan-14 00:41:00 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Jan-14 00:41:00 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Jan-14 00:41:00 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 00:41:00 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:41:00 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:41:00 LOG2 antvel: Parameters to Doppler: Topocentric 16860 2008 14 0.0 2008-Jan-14 00:41:00 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:41:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 00:41:00 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 00:41:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:41:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:41:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:41:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:00 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:41:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:41:00 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Jan-14 00:41:00 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:41:00 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.768728 2008.038407863716 18.999933 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 0 7.699999999999993 26.036666666666662 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 1 7.702144044438015 25.934548352481197 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 2 7.706636374721608 26.011366513951767 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 3 7.704550742544630 26.113736341055645 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 4 7.697817803396639 26.138685589264782 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 5 7.693311829769512 26.060853842864464 2008-Jan-14 00:41:00 LOG4 log_alfabeam: ALFABEAM 6 7.695552099354811 25.959096584195287 2008-Jan-14 00:41:00 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400020 2008-Jan-14 00:41:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:41:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:41:01 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Jan-14 00:41:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:41:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:41:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16862.00 2008-Jan-14 00:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:41:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:41:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:41:12 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2008-Jan-14 00:41:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:41:12 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Jan-14 00:41:12 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Jan-14 00:41:12 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Jan-14 00:41:12 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 00:41:12 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:41:12 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:41:12 LOG2 antvel: Parameters to Doppler: Topocentric 16872 2008 14 0.0 2008-Jan-14 00:41:12 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:41:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 00:41:12 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 00:41:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:41:12 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:41:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:41:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:12 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 00:41:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:41:12 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Jan-14 00:41:12 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:41:12 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.772071 2008.038408243973 18.999933 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000039 26.036666666666669 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 1 7.702190597860690 25.934728121091631 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 2 7.706647829509686 26.011917700404524 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 3 7.704515421987352 26.114112434497244 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 4 7.697771241882765 26.138502720069578 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 5 7.693300943892070 26.060299097191940 2008-Jan-14 00:41:12 LOG4 log_alfabeam: ALFABEAM 6 7.695587547709398 25.958729341534472 2008-Jan-14 00:41:12 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400021 2008-Jan-14 00:41:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:41:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:41:13 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Jan-14 00:41:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:41:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:41:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16874.00 2008-Jan-14 00:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:41:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:41:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:41:24 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Jan-14 00:41:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:41:24 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Jan-14 00:41:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jan-14 00:41:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 00:41:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 00:41:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:41:24 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Jan-14 00:41:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:41:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 00:41:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:41:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:41:24 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Jan-14 00:41:24 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Jan-14 00:41:24 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Jan-14 00:41:24 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 00:41:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:41:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:41:24 LOG2 antvel: Parameters to Doppler: Topocentric 16884 2008 14 0.0 2008-Jan-14 00:41:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:41:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 00:41:24 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 00:41:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:41:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:41:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:41:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:41:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:41:24 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Jan-14 00:41:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:41:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.775413 2008.03840862423 18.999933 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000020 26.036666666666662 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 1 7.702236993017713 25.934911445428568 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 2 7.706659015153110 26.012468940454951 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 3 7.704479986570549 26.114484987849828 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 4 7.697724841700265 26.138316305096538 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 5 7.693290329552156 26.059744391516251 2008-Jan-14 00:41:24 LOG4 log_alfabeam: ALFABEAM 6 7.695623102363591 25.958365645661665 2008-Jan-14 00:41:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400022 2008-Jan-14 00:41:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:41:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:41:25 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Jan-14 00:41:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:41:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 00:41:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16886.00 2008-Jan-14 00:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:41:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:41:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:41:36 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Jan-14 00:41:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:41:36 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Jan-14 00:41:36 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Jan-14 00:41:36 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Jan-14 00:41:36 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 00:41:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:41:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:41:36 LOG2 antvel: Parameters to Doppler: Topocentric 16896 2008 14 0.0 2008-Jan-14 00:41:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:41:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 00:41:36 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 00:41:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:41:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:41:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:41:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:41:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:41:36 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Jan-14 00:41:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:41:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.778756 2008.038409004487 18.999933 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000061 26.036666666666676 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 1 7.702283253189506 25.935098400422195 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 2 7.706669938185235 26.013020502921805 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 3 7.704444419478512 26.114854196918223 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 4 7.697678579554579 26.138126268201429 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 5 7.693279980423102 26.059189455310296 2008-Jan-14 00:41:36 LOG4 log_alfabeam: ALFABEAM 6 7.695658780214756 25.958005304103381 2008-Jan-14 00:41:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400023 2008-Jan-14 00:41:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:41:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:41:37 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Jan-14 00:41:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:41:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 00:41:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16898.00 2008-Jan-14 00:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:41:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:41:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:41:48 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2008-Jan-14 00:41:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:41:48 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2008-Jan-14 00:41:48 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Jan-14 00:41:48 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Jan-14 00:41:48 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 00:41:48 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:41:48 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:41:48 LOG2 antvel: Parameters to Doppler: Topocentric 16908 2008 14 0.0 2008-Jan-14 00:41:48 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:41:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 00:41:48 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 00:41:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:41:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:41:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:41:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:48 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:41:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:41:48 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Jan-14 00:41:48 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:41:48 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.782098 2008.0384093847442 18.999933 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000016 26.036666666666658 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 1 7.702329346284096 25.935288838491331 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 2 7.706680591994720 26.013571997000845 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 3 7.704408746396957 26.115219814888817 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 4 7.697632487526007 26.137932759436669 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 5 7.693269902637193 26.058634681719788 2008-Jan-14 00:41:48 LOG4 log_alfabeam: ALFABEAM 6 7.695694555524404 25.957648556407605 2008-Jan-14 00:41:48 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400024 2008-Jan-14 00:41:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:41:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:41:49 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Jan-14 00:41:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:41:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 00:41:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:41:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16910.00 2008-Jan-14 00:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:42:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:42:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:42:00 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Jan-14 00:42:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:42:00 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Jan-14 00:42:00 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Jan-14 00:42:00 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Jan-14 00:42:00 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 00:42:00 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:42:00 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:42:00 LOG2 antvel: Parameters to Doppler: Topocentric 16920 2008 14 0.0 2008-Jan-14 00:42:00 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:42:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 00:42:00 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 00:42:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:42:00 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:42:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:42:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:00 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:42:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:42:00 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Jan-14 00:42:00 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:42:00 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.785440 2008.0384097650012 18.999933 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000006 26.036666666666662 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 1 7.702375281815534 25.935482778363099 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 2 7.706690979896047 26.014123527104594 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 3 7.704372961126884 26.115581928013125 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 4 7.697586556085593 26.137735759770813 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 5 7.693260092915593 26.058079965590128 2008-Jan-14 00:42:00 LOG4 log_alfabeam: ALFABEAM 6 7.695730434543163 25.957295317024016 2008-Jan-14 00:42:00 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400025 2008-Jan-14 00:42:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:42:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:42:01 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Jan-14 00:42:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:42:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 00:42:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16922.00 2008-Jan-14 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:42:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:42:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:42:12 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2008-Jan-14 00:42:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:42:12 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Jan-14 00:42:12 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Jan-14 00:42:12 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Jan-14 00:42:12 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 00:42:12 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:42:12 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:42:12 LOG2 antvel: Parameters to Doppler: Topocentric 16932 2008 14 0.0 2008-Jan-14 00:42:12 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:42:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 00:42:12 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 00:42:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:42:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:42:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:42:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:12 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:42:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:42:12 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Jan-14 00:42:12 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:42:12 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.788783 2008.0384101452582 18.999933 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000013 26.036666666666672 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 1 7.702421069180033 25.935680242042331 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 2 7.706701104968357 26.014675197970973 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 3 7.704337057348621 26.115940619565730 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 4 7.697540775824757 26.137535246899166 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 5 7.693250548217371 26.057525201511012 2008-Jan-14 00:42:12 LOG4 log_alfabeam: ALFABEAM 6 7.695766423635683 25.956945503394184 2008-Jan-14 00:42:12 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400026 2008-Jan-14 00:42:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:42:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:42:13 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Jan-14 00:42:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:42:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 00:42:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16934.00 2008-Jan-14 00:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:42:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:42:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:42:24 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Jan-14 00:42:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:42:24 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Jan-14 00:42:24 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Jan-14 00:42:24 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Jan-14 00:42:24 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 00:42:24 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:42:24 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:42:24 LOG2 antvel: Parameters to Doppler: Topocentric 16944 2008 14 0.0 2008-Jan-14 00:42:24 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:42:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 00:42:24 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 00:42:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:42:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:42:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:42:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:24 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:42:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:42:24 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Jan-14 00:42:24 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:42:24 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.792125 2008.0384105255152 18.999933 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000013 26.036666666666672 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 1 7.702466676779900 25.935881072920509 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 2 7.706710961326551 26.015226619577401 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 3 7.704301060990510 26.116295652677788 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 4 7.697495178320580 26.137331379855990 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 5 7.693241273944468 26.056970781552771 2008-Jan-14 00:42:24 LOG4 log_alfabeam: ALFABEAM 6 7.695802496846867 25.956599345147769 2008-Jan-14 00:42:24 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400027 2008-Jan-14 00:42:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:42:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:42:25 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Jan-14 00:42:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:42:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 00:42:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16946.00 2008-Jan-14 00:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:42:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:42:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:42:36 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Jan-14 00:42:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:42:36 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Jan-14 00:42:36 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Jan-14 00:42:36 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Jan-14 00:42:36 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 00:42:36 LOG2 antvel: Precessing RA = 07:42:00.0 Dec = +26:02:12.0 Epoch = 2008.03841 J 2008-Jan-14 00:42:36 LOG2 antvel: Computed apparent RA = 07:42:31.8 Dec = +26:01:04.2 2008-Jan-14 00:42:36 LOG2 antvel: Parameters to Doppler: Topocentric 16956 2008 14 0.0 2008-Jan-14 00:42:36 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 00:42:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 00:42:36 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 00:42:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 00:42:36 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 00:42:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:42:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:36 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 00:42:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 00:42:36 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Jan-14 00:42:36 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 00:42:36 LOG5 log_alfabeam: Parameters: 7.7000000000000002 26.036666666666669 7.795468 2008.0384109057723 18.999933 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 0 7.700000000000023 26.036666666666676 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 1 7.702512127776559 25.936085351837445 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 2 7.706720555123137 26.015778062260956 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 3 7.704264954969341 26.116647218755698 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 4 7.697449740400199 26.137124076577066 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 5 7.693232264157004 26.056416433739606 2008-Jan-14 00:42:36 LOG4 log_alfabeam: ALFABEAM 6 7.695838671333456 25.956256654274416 2008-Jan-14 00:42:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400028 2008-Jan-14 00:42:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 00:42:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 00:42:37 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Jan-14 00:42:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:42:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 00:42:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:42:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16958.00 2008-Jan-14 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:42:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:42:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 00:42:48 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 00:42:48 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 INFO2 smartfreq: Switching off CAL 2008-Jan-14 00:42:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 00:42:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 00:42:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:42:48 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:42:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:42:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:42:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:42:48 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 STOP finish_task: Finishing task 'smart frequency switching' 2008-Jan-14 00:42:48 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Jan-14 00:42:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:42:48 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Jan-14 00:42:48 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 WARNING smartfreq: WARNING smart frequency switching changes the frequency settings! 2008-Jan-14 00:42:48 ALERT smartfreq: Don't forget to set new frequencies! 2008-Jan-14 00:42:48 NOTE run_command_file: DONE with command file processing 2008-Jan-14 00:42:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jan-14 00:42:48 STOP finish_task: Finishing task 'running command file 'command_galfasrc'' 2008-Jan-14 00:42:48 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jan-14 00:42:48 DONE finish_task: DONE finished running: command file 'command_galfasrc' 2008-Jan-14 00:42:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:42:48 END end_task: Finishing task 'running command file 'command_galfasrc'' with status 'OK' 2008-Jan-14 00:42:48 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Jan-14 00:43:14 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180.conf' 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 00:43:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:43:16 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jan-14 00:43:16 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jan-14 00:43:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 00:43:16 LOG5 begin_task: Level: (1) ID = <10088> Status = 0 0 0 0 ok 2008-Jan-14 00:43:16 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 00:43:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 00:43:16 LOG1 config_iflo: Receiver ALFA already selected 2008-Jan-14 00:43:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:43:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:43:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:43:16 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:43:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:43:17 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:43:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:43:17 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jan-14 00:43:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jan-14 00:43:17 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 00:43:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jan-14 00:43:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jan-14 00:43:17 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jan-14 00:43:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 00:43:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:43:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 00:43:17 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 00:43:17 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 00:43:17 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 00:43:17 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 00:43:17 LOG5 finish_task: Level: (1) ID = <10088> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 00:43:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:43:17 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 00:43:17 LOG5 end_task: Level: (1) ID = <10088> Status = 0 0 0 0 ok 2008-Jan-14 00:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:43:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jan-14 00:43:18 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jan-14 00:43:18 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jan-14 00:43:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 00:43:18 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 00:43:18 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 00:43:18 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 00:43:18 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 00:43:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 00:43:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:43:18 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 00:43:18 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jan-14 00:43:18 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 00:43:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:43:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:18 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:43:18 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 00:43:18 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 00:43:18 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 00:43:18 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 00:43:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:43:18 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 00:43:18 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:43:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:43:18 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 00:43:18 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 00:43:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:43:18 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:43:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 00:43:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:43:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:43:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:43:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:43:19 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jan-14 00:43:19 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 00:43:19 LOG5 finish_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 00:43:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:43:19 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 00:43:19 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:43:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:43:19 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jan-14 00:43:19 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Jan-14 00:43:19 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:43:19 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:43:19 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:43:19 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 00:43:19 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:43:19 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:43:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:43:19 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:43:19 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2008-Jan-14 00:43:19 NOTE CIMA-load_config_file: Configuration file 'a2010_az180.conf' applied. 2008-Jan-14 00:43:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:43:20 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:43:52 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jan-14 00:43:52 LOG4 exec_msg: From OBSERVER: track_new_source drift107p2 075000.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Jan-14 00:43:52 LOG1 track_new_source: Calling 'track_new_source drift107p2 075000.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jan-14 00:43:52 BEGIN begin_task: Starting task 'selecting new source' 2008-Jan-14 00:43:52 LOG5 begin_task: Level: (1) ID = <10096> Status = 0 0 0 0 ok 2008-Jan-14 00:43:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Selecting source 'drift107p2' ...} 2008-Jan-14 00:43:52 LOG3 track_source: Calling 'track_source drift107p2 075000.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Jan-14 00:43:52 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 00:43:52 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-Jan-14 00:43:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Slewing to source 'drift107p2' ...} 2008-Jan-14 00:43:53 INFO1 track_source: Starting to track drift107p2 2008-Jan-14 00:43:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:43:53 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 00:43:53 LOG3 vw_send: To DATATAKING: pnt tr 075000.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:43:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:43:53 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 00:43:53 LOG5 finish_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 00:43:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:43:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 00:43:53 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jan-14 00:43:53 START begin_task: Starting task 'applying pointing corrections' 2008-Jan-14 00:43:53 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jan-14 00:43:53 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:43:53 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jan-14 00:43:53 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jan-14 00:43:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:43:53 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jan-14 00:43:53 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 STOP finish_task: Finishing task 'selecting new source' 2008-Jan-14 00:43:53 LOG5 finish_task: Level: (1) ID = <10096> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 DONE finish_task: DONE finished selecting: new source 2008-Jan-14 00:43:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:43:53 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jan-14 00:43:53 LOG5 end_task: Level: (1) ID = <10096> Status = 0 0 0 0 ok 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: pnt tr 075000.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:34 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Jan-14 00:44:34 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical) 2008-Jan-14 00:44:34 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical)' 2008-Jan-14 00:44:34 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jan-14 00:44:35 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2008-Jan-14 00:44:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift107p2' 2008-Jan-14 00:44:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jan-14 00:44:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {testdrift} 2008-Jan-14 00:44:35 INFO5 fixed_driftmap: Start: year = 2008.0384146449667 RA = 04:22:31.1 Dec = +26:03:30.6 2008-Jan-14 00:44:35 NOTE fixed_driftmap: Setting ZA to 7:42:16.9 ... 2008-Jan-14 00:44:35 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 7.70 2008-Jan-14 00:44:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.7047023835 -CF 2008-Jan-14 00:44:35 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:44:35 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Jan-14 00:44:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:44:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:44:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Jan-14 00:44:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 00:44:35 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 00:44:35 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Jan-14 00:44:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.7047023835 -CF 2008-Jan-14 00:44:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:44:36 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:44:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 00:44:36 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:44:36 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:44:36 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:44:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:44:36 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:44:36 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 00:44:36 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 00:44:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 00:44:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:44:36 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 00:44:36 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 00:44:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:44:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:44:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 00:44:36 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 00:44:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:44:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 00:44:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:44:36 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Jan-14 00:44:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:44:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:44:37 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:44:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 00:44:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:44:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:44:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:44:37 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:44:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:44:37 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:44:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:44:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 00:44:37 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 00:44:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:44:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 00:44:37 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:44:37 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:44:37 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:44:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:44:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:44:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:44:37 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:44:37 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Jan-14 00:44:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:44:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:44:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:44:40 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Jan-14 00:44:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:44:40 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:44:40 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Jan-14 00:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:44:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:44:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:44:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:44:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:44:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:44:40 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Jan-14 00:44:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:44:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:44:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:44:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Jan-14 00:44:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:44:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:44:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:44:41 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.953 1.040 ALFA beam 1: 1.091 1.074 2008-Jan-14 00:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.075 0.872 ALFA beam 3: 0.947 1.009 2008-Jan-14 00:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.018 0.950 ALFA beam 5: 0.923 1.013 2008-Jan-14 00:44:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.995 1.016 ALFA beam 7: 0.957 1.066 2008-Jan-14 00:44:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:44:41 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:44:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:44:41 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 00:44:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:44:41 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:44:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:44:41 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 04:22:31.1 LST = 07:49:48.0 diff = -12436.9 secs 2008-Jan-14 00:44:41 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Jan-14 00:44:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 00:44:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 00:44:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 00:44:41 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 00:44:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 00:44:41 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Jan-14 00:44:41 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 00:44:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 00:44:41 INFO2 take_spectra: Starting WAPP scan: 801400029 2008-Jan-14 00:44:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 00:44:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 00:44:42 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Jan-14 00:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:44:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0002.fits 2008-Jan-14 00:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:44:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0002.fits} 2008-Jan-14 00:44:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17083.00 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 00:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 00:44:44 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Jan-14 00:44:49 LOG4 exec_msg: From WAPPWATCH2: log_message ERROR {WAPP2-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2008-Jan-14 00:44:49 ERROR WAPP2-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2008-Jan-14 00:44:49 LOG4 exec_msg: From WAPPWATCH2: wapp_failure 2 2008-Jan-14 00:44:49 LOG5 wapp_failure: Calling 'wapp_failure 2' 2008-Jan-14 00:44:49 ERROR wapp_failure: ERROR WAPP-2 has failed! 2008-Jan-14 00:44:49 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 2 crash' 2008-Jan-14 00:44:49 START begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:49 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Jan-14 00:44:49 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2008-Jan-14 00:44:49 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2008-Jan-14 00:44:49 LOG1 task_failed: Task 'handling WAPP failure' failed! 2008-Jan-14 00:44:49 LOG5 task_failed: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2008-Jan-14 00:44:49 WARNING abort_task: WARNING abort requested! 2008-Jan-14 00:44:49 WARNING abort_task: WARNING Aborting handling WAPP failure 2008-Jan-14 00:44:49 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2008-Jan-14 00:44:49 ALERT handle_wapp_failure: Restarting WAPP-2! 2008-Jan-14 00:44:49 NOTE handle_wapp_failure: Stand by for automatic WAPP-2 reconfiguration in 6 seconds! 2008-Jan-14 00:44:49 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2008-Jan-14 00:44:49 LOG5 end_task: Level: (4) ID = <10112> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'FAILED' 2008-Jan-14 00:44:49 LOG5 end_task: Level: (3) ID = <10111> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 START begin_task: Starting task 'stopping the WAPPs' 2008-Jan-14 00:44:49 LOG5 begin_task: Level: (3) ID = <10113> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Jan-14 00:44:49 INFO1 stop_wapp: Stopping the WAPPs 2008-Jan-14 00:44:49 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Jan-14 00:44:49 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Jan-14 00:44:49 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Jan-14 00:44:49 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Jan-14 00:44:49 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Jan-14 00:44:49 LOG5 begin_task: Level: (4) ID = <10114> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 LOG3 exec_msg: Closing socket 2008-Jan-14 00:44:49 LOG4 exec_msg: From WAPPWATCH1: log_message ERROR {WAPP1-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2008-Jan-14 00:44:49 ERROR WAPP1-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2008-Jan-14 00:44:49 LOG4 exec_msg: From WAPPWATCH1: wapp_failure 1 2008-Jan-14 00:44:49 LOG5 wapp_failure: Calling 'wapp_failure 1' 2008-Jan-14 00:44:49 ERROR wapp_failure: ERROR WAPP-1 has failed! 2008-Jan-14 00:44:49 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 1 crash' 2008-Jan-14 00:44:49 START begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:49 LOG5 begin_task: Level: (5) ID = <10115> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 NOTE handle_wapp_failure: Will abort task 'fixed azimuth drift map' since the WAPP failure preference is set to 'abort'! 2008-Jan-14 00:44:49 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2008-Jan-14 00:44:49 LOG1 task_failed: Task 'handling WAPP failure' failed! 2008-Jan-14 00:44:49 LOG5 task_failed: Level: (5) ID = <10115> Status = 1 0 0 1 failed 2008-Jan-14 00:44:49 WARNING abort_task: WARNING abort requested! 2008-Jan-14 00:44:49 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2008-Jan-14 00:44:49 ALERT handle_wapp_failure: Restarting WAPP-1! 2008-Jan-14 00:44:49 NOTE handle_wapp_failure: Stand by for automatic WAPP-1 reconfiguration in 6 seconds! 2008-Jan-14 00:44:50 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2008-Jan-14 00:44:50 LOG5 end_task: Level: (5) ID = <10115> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2008-Jan-14 00:44:50 LOG5 end_task: Level: (4) ID = <10114> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2008-Jan-14 00:44:50 LOG5 end_task: Level: (3) ID = <10113> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'FAILED' 2008-Jan-14 00:44:50 LOG5 end_task: Level: (2) ID = <10110> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jan-14 00:44:50 LOG5 finish_task: Level: (1) ID = <10099> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2008-Jan-14 00:44:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2008-Jan-14 00:44:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2008-Jan-14 00:44:50 LOG5 end_task: Level: (1) ID = <10099> Status = 1 0 0 1 failed 2008-Jan-14 00:44:50 LOG4 WAPP=1+3+4-wappcon: Received command 'ABORT' 2008-Jan-14 00:44:50 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 21071 is no longer running! 2008-Jan-14 00:44:50 ERROR WAPP=3-check_pid: ERROR WAPP process with process-ID 30471 is no longer running! 2008-Jan-14 00:44:50 ERROR WAPP=1-check_pid: ERROR WAPP process with process-ID 3993 is no longer running! 2008-Jan-14 00:44:50 LOG3 exec_msg: Closing socket 2008-Jan-14 00:44:51 LOG4 exec_msg: From WAPPWATCH4: log_message ERROR {WAPP4-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2008-Jan-14 00:44:51 ERROR WAPP4-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2008-Jan-14 00:44:51 LOG4 exec_msg: From WAPPWATCH4: wapp_failure 4 2008-Jan-14 00:44:51 LOG5 wapp_failure: Calling 'wapp_failure 4' 2008-Jan-14 00:44:51 ERROR wapp_failure: ERROR WAPP-4 has failed! 2008-Jan-14 00:44:51 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 crash' 2008-Jan-14 00:44:51 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:51 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Jan-14 00:44:51 ALERT handle_wapp_failure: Restarting WAPP-4! 2008-Jan-14 00:44:51 NOTE handle_wapp_failure: Stand by for automatic WAPP-4 reconfiguration in 6 seconds! 2008-Jan-14 00:44:51 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:51 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2008-Jan-14 00:44:51 LOG3 exec_msg: Closing socket 2008-Jan-14 00:44:52 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jan-14 00:44:52 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jan-14 00:44:53 LOG4 exec_msg: From WAPPWATCH3: log_message ERROR {WAPP3-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2008-Jan-14 00:44:53 ERROR WAPP3-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2008-Jan-14 00:44:53 LOG4 exec_msg: From WAPPWATCH3: wapp_failure 3 2008-Jan-14 00:44:53 LOG5 wapp_failure: Calling 'wapp_failure 3' 2008-Jan-14 00:44:53 ERROR wapp_failure: ERROR WAPP-3 has failed! 2008-Jan-14 00:44:53 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 crash' 2008-Jan-14 00:44:53 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:53 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2008-Jan-14 00:44:53 ALERT handle_wapp_failure: Restarting WAPP-3! 2008-Jan-14 00:44:53 NOTE handle_wapp_failure: Stand by for automatic WAPP-3 reconfiguration in 6 seconds! 2008-Jan-14 00:44:53 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:53 LOG5 end_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2008-Jan-14 00:44:53 LOG3 exec_msg: Closing socket 2008-Jan-14 00:44:54 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jan-14 00:44:55 LOG5 wapp_restart: Calling 'wapp_restart 2' 2008-Jan-14 00:44:55 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:55 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Jan-14 00:44:55 ALERT wapp_restart: Sending configuration information to WAPP-2 2008-Jan-14 00:44:55 LOG3 sock_errsend: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:44:55 LOG3 sock_errsend: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:55 INFO1 wapp_restart: Configuration information sent to WAPP-2 2008-Jan-14 00:44:55 NOTE wapp_restart: WAPP-2 should be ready now 2008-Jan-14 00:44:55 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:55 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2008-Jan-14 00:44:56 LOG5 wapp_restart: Calling 'wapp_restart 1' 2008-Jan-14 00:44:56 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:56 LOG5 begin_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Jan-14 00:44:56 ALERT wapp_restart: Sending configuration information to WAPP-1 2008-Jan-14 00:44:56 LOG3 sock_errsend: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:44:56 LOG3 sock_errsend: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:56 INFO1 wapp_restart: Configuration information sent to WAPP-1 2008-Jan-14 00:44:56 NOTE wapp_restart: WAPP-1 should be ready now 2008-Jan-14 00:44:56 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:56 LOG5 end_task: Level: (1) ID = <10119> Status = 0 0 0 0 ok 2008-Jan-14 00:44:56 LOG4 WAPP=1+2-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:44:56 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jan-14 00:44:56 LOG4 WAPP=2-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:44:56 LOG4 WAPP=1-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:44:57 LOG5 wapp_restart: Calling 'wapp_restart 4' 2008-Jan-14 00:44:57 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:57 LOG5 begin_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2008-Jan-14 00:44:57 ALERT wapp_restart: Sending configuration information to WAPP-4 2008-Jan-14 00:44:57 LOG3 sock_errsend: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:44:57 LOG3 sock_errsend: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:57 INFO1 wapp_restart: Configuration information sent to WAPP-4 2008-Jan-14 00:44:57 NOTE wapp_restart: WAPP-4 should be ready now 2008-Jan-14 00:44:57 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:57 LOG5 end_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2008-Jan-14 00:44:58 LOG4 WAPP=4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:44:58 LOG4 WAPP=4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:44:59 LOG5 wapp_restart: Calling 'wapp_restart 3' 2008-Jan-14 00:44:59 BEGIN begin_task: Starting task 'handling WAPP failure' 2008-Jan-14 00:44:59 LOG5 begin_task: Level: (1) ID = <10121> Status = 0 0 0 0 ok 2008-Jan-14 00:44:59 ALERT wapp_restart: Sending configuration information to WAPP-3 2008-Jan-14 00:44:59 LOG3 sock_errsend: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:44:59 LOG3 sock_errsend: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:44:59 INFO1 wapp_restart: Configuration information sent to WAPP-3 2008-Jan-14 00:44:59 NOTE wapp_restart: WAPP-3 should be ready now 2008-Jan-14 00:44:59 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2008-Jan-14 00:44:59 LOG5 end_task: Level: (1) ID = <10121> Status = 0 0 0 0 ok 2008-Jan-14 00:44:59 LOG4 WAPP=3-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:44:59 LOG4 WAPP=3-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:45:07 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Jan-14 00:45:07 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Jan-14 00:45:07 WARNING abort_task: WARNING abort requested! 2008-Jan-14 00:45:19 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jan-14 00:45:19 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jan-14 00:45:19 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jan-14 00:45:19 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jan-14 00:45:19 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Jan-14 00:45:19 NOTE restart_wapp: Restarting all WAPPs 2008-Jan-14 00:45:19 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jan-14 00:45:19 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jan-14 00:45:19 LOG5 end_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2008-Jan-14 00:45:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:45:20 LOG3 exec_msg: Closing socket 2008-Jan-14 00:45:20 LOG3 exec_msg: Closing socket 2008-Jan-14 00:45:20 LOG3 exec_msg: Closing socket 2008-Jan-14 00:45:20 LOG3 exec_msg: Closing socket 2008-Jan-14 00:45:22 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jan-14 00:45:22 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jan-14 00:45:22 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jan-14 00:45:22 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jan-14 00:45:37 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180.conf' 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 00:45:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 00:45:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:45:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:45:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:45:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:45:39 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jan-14 00:45:39 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jan-14 00:45:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 00:45:39 LOG5 begin_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 00:45:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 00:45:39 LOG1 config_iflo: Receiver ALFA already selected 2008-Jan-14 00:45:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:45:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:45:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:45:39 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:45:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:45:39 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:45:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:45:39 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jan-14 00:45:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jan-14 00:45:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 00:45:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jan-14 00:45:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jan-14 00:45:39 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jan-14 00:45:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 00:45:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:45:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 00:45:39 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 00:45:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 00:45:39 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 00:45:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 00:45:39 LOG5 finish_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 00:45:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:45:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 00:45:39 LOG5 end_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2008-Jan-14 00:45:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jan-14 00:45:40 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jan-14 00:45:40 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jan-14 00:45:40 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 00:45:40 LOG5 begin_task: Level: (1) ID = <10126> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 00:45:40 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 00:45:40 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 00:45:40 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 00:45:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 00:45:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:45:40 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 00:45:40 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jan-14 00:45:40 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 00:45:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:45:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:45:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:45:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 00:45:40 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 00:45:40 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 00:45:40 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 00:45:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:45:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 00:45:40 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2008-Jan-14 00:45:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 00:45:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 00:45:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 00:45:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:45:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:45:41 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 00:45:41 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 00:45:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:45:41 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 00:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:45:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:45:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:45:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:45:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:45:41 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jan-14 00:45:41 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 00:45:41 LOG5 finish_task: Level: (1) ID = <10126> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 00:45:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:45:41 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 00:45:41 LOG5 end_task: Level: (1) ID = <10126> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:45:41 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jan-14 00:45:41 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Jan-14 00:45:41 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:45:41 LOG5 begin_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:45:41 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:45:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 00:45:41 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:45:41 LOG5 finish_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Jan-14 00:45:41 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:45:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:45:41 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:45:41 LOG5 end_task: Level: (1) ID = <10130> Status = 0 0 0 0 ok 2008-Jan-14 00:45:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:45:42 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:45:42 NOTE CIMA-load_config_file: Configuration file 'a2010_az180.conf' applied. 2008-Jan-14 00:46:02 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jan-14 00:46:02 LOG4 exec_msg: From OBSERVER: track_new_source drift107p2 075100.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Jan-14 00:46:02 LOG1 track_new_source: Calling 'track_new_source drift107p2 075100.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jan-14 00:46:02 BEGIN begin_task: Starting task 'selecting new source' 2008-Jan-14 00:46:02 LOG5 begin_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Selecting source 'drift107p2' ...} 2008-Jan-14 00:46:02 LOG3 track_source: Calling 'track_source drift107p2 075100.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Jan-14 00:46:02 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 00:46:02 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Slewing to source 'drift107p2' ...} 2008-Jan-14 00:46:02 INFO1 track_source: Starting to track drift107p2 2008-Jan-14 00:46:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:46:02 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 00:46:02 LOG3 vw_send: To DATATAKING: pnt tr 075100.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:46:02 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:46:02 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 00:46:02 LOG5 finish_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 00:46:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 00:46:02 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jan-14 00:46:02 START begin_task: Starting task 'applying pointing corrections' 2008-Jan-14 00:46:02 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jan-14 00:46:02 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:46:02 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jan-14 00:46:02 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Jan-14 00:46:02 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jan-14 00:46:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:02 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jan-14 00:46:02 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2008-Jan-14 00:46:03 STOP finish_task: Finishing task 'selecting new source' 2008-Jan-14 00:46:03 LOG5 finish_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Jan-14 00:46:03 DONE finish_task: DONE finished selecting: new source 2008-Jan-14 00:46:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:46:03 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jan-14 00:46:03 LOG5 end_task: Level: (1) ID = <10131> Status = 0 0 0 0 ok 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: pnt tr 075100.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:46:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:06 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Jan-14 00:46:06 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical) 2008-Jan-14 00:46:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical)' 2008-Jan-14 00:46:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jan-14 00:46:06 LOG5 begin_task: Level: (1) ID = <10134> Status = 0 0 0 0 ok 2008-Jan-14 00:46:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift107p2' 2008-Jan-14 00:46:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jan-14 00:46:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {testdrift} 2008-Jan-14 00:46:06 INFO5 fixed_driftmap: Start: year = 2008.0384175602708 RA = 04:22:31.1 Dec = +26:03:30.6 2008-Jan-14 00:46:06 NOTE fixed_driftmap: Setting ZA to 7:42:16.9 ... 2008-Jan-14 00:46:06 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 7.70 2008-Jan-14 00:46:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.7047023724 -CF 2008-Jan-14 00:46:06 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:46:06 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Jan-14 00:46:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:46:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:46:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Jan-14 00:46:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 00:46:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 00:46:06 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Jan-14 00:46:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.7047023724 -CF 2008-Jan-14 00:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:46:07 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:46:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 00:46:07 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Jan-14 00:46:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:46:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:46:07 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Jan-14 00:46:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:46:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:07 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:46:07 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Jan-14 00:46:07 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 00:46:07 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Jan-14 00:46:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 00:46:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 00:46:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:46:07 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 00:46:07 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Jan-14 00:46:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 00:46:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:46:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 00:46:08 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 00:46:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:46:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 00:46:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:46:08 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:46:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:46:08 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:46:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 00:46:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:46:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:46:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:46:08 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:46:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:46:08 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:46:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:46:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 00:46:08 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 00:46:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 00:46:08 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:46:08 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:46:08 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:46:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:46:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:46:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:46:08 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:46:08 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Jan-14 00:46:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:46:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:46:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:46:11 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Jan-14 00:46:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:46:11 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:46:11 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Jan-14 00:46:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:46:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:46:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:46:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:46:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:46:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:46:11 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Jan-14 00:46:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:46:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:46:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Jan-14 00:46:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:46:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:46:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:46:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:46:12 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.929 1.038 ALFA beam 1: 1.092 1.075 2008-Jan-14 00:46:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.080 1.103 ALFA beam 3: 0.950 1.010 2008-Jan-14 00:46:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.023 0.955 ALFA beam 5: 0.923 1.016 2008-Jan-14 00:46:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.968 0.990 ALFA beam 7: 0.955 1.070 2008-Jan-14 00:46:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:46:12 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:46:12 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 00:46:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:46:12 LOG5 finish_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:46:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:46:12 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 04:22:31.1 LST = 07:51:19.3 diff = -12528.2 secs 2008-Jan-14 00:46:12 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Jan-14 00:46:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 00:46:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:46:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:46:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:46:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:46:12 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080114.a2010.0002.fits' is empty! 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 00:46:12 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 00:46:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 00:46:12 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 00:46:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 00:46:12 INFO2 take_spectra: Starting WAPP scan: 801400030 2008-Jan-14 00:46:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 00:46:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 00:46:12 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Jan-14 00:46:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:46:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:46:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17173.00 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 00:46:14 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Jan-14 00:46:20 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Jan-14 00:46:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 00:46:24.298 (seconds: 2784.298)!} 2008-Jan-14 00:46:24 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 00:46:24.298 (seconds: 2784.298)! 2008-Jan-14 00:46:25 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 2783.0 to 2784.0! 2008-Jan-14 00:46:26 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (2783.0 - 2785.0)! 2008-Jan-14 00:46:55 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Jan-14 00:46:55 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Jan-14 00:46:55 WARNING abort_task: WARNING abort requested! 2008-Jan-14 00:46:55 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Jan-14 00:46:55 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Jan-14 00:46:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Jan-14 00:46:55 LOG5 end_task: Level: (3) ID = <10146> Status = 1 0 0 0 abort 2008-Jan-14 00:46:55 START begin_task: Starting task 'stopping the WAPPs' 2008-Jan-14 00:46:55 LOG5 begin_task: Level: (3) ID = <10147> Status = 1 0 0 0 abort 2008-Jan-14 00:46:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Jan-14 00:46:55 INFO1 stop_wapp: Stopping the WAPPs 2008-Jan-14 00:46:55 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Jan-14 00:46:55 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Jan-14 00:46:55 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Jan-14 00:46:55 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Jan-14 00:46:55 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Jan-14 00:46:55 LOG5 begin_task: Level: (4) ID = <10148> Status = 1 0 0 0 abort 2008-Jan-14 00:46:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Jan-14 00:46:56 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Jan-14 00:46:56 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Jan-14 00:46:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:46:56 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Jan-14 00:46:56 LOG5 end_task: Level: (4) ID = <10148> Status = 1 0 0 0 abort 2008-Jan-14 00:46:56 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Jan-14 00:46:56 LOG5 end_task: Level: (3) ID = <10147> Status = 1 0 0 0 abort 2008-Jan-14 00:46:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Jan-14 00:46:56 LOG5 end_task: Level: (2) ID = <10145> Status = 1 0 0 0 abort 2008-Jan-14 00:46:56 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jan-14 00:46:56 LOG5 finish_task: Level: (1) ID = <10134> Status = 1 0 0 0 abort 2008-Jan-14 00:46:56 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Jan-14 00:46:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Jan-14 00:46:57 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Jan-14 00:46:57 LOG5 end_task: Level: (1) ID = <10134> Status = 1 0 0 0 abort 2008-Jan-14 00:47:06 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jan-14 00:47:06 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jan-14 00:47:06 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jan-14 00:47:06 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jan-14 00:47:06 LOG5 begin_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2008-Jan-14 00:47:06 NOTE restart_wapp: Restarting all WAPPs 2008-Jan-14 00:47:06 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jan-14 00:47:06 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jan-14 00:47:06 LOG5 end_task: Level: (1) ID = <10149> Status = 0 0 0 0 ok 2008-Jan-14 00:47:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:47:07 LOG3 exec_msg: Closing socket 2008-Jan-14 00:47:07 LOG3 exec_msg: Closing socket 2008-Jan-14 00:47:07 LOG3 exec_msg: Closing socket 2008-Jan-14 00:47:07 LOG3 exec_msg: Closing socket 2008-Jan-14 00:47:09 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jan-14 00:47:09 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jan-14 00:47:09 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jan-14 00:47:09 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jan-14 00:47:15 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180.conf' 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 00:47:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:47:17 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jan-14 00:47:17 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jan-14 00:47:17 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 00:47:17 LOG5 begin_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2008-Jan-14 00:47:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 00:47:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 00:47:17 LOG1 config_iflo: Receiver ALFA already selected 2008-Jan-14 00:47:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:47:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:47:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:47:17 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:47:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:47:18 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:47:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:47:18 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jan-14 00:47:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jan-14 00:47:18 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 00:47:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jan-14 00:47:18 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jan-14 00:47:18 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jan-14 00:47:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 00:47:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:47:18 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 00:47:18 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 00:47:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 00:47:18 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 00:47:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 00:47:18 LOG5 finish_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 00:47:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:47:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 00:47:18 LOG5 end_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2008-Jan-14 00:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:47:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 00:47:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 00:47:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jan-14 00:47:19 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jan-14 00:47:19 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jan-14 00:47:19 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 00:47:19 LOG5 begin_task: Level: (1) ID = <10153> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 00:47:19 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 00:47:19 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 00:47:19 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 00:47:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 00:47:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:47:19 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 00:47:19 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jan-14 00:47:19 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 00:47:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:47:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:47:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:47:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 00:47:19 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 00:47:19 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 00:47:19 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 00:47:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:47:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 00:47:19 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:20 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 00:47:20 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 00:47:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:47:20 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 00:47:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:47:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:47:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:47:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:47:20 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jan-14 00:47:20 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 00:47:20 LOG5 finish_task: Level: (1) ID = <10153> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 00:47:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:47:20 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 00:47:20 LOG5 end_task: Level: (1) ID = <10153> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:47:20 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jan-14 00:47:20 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Jan-14 00:47:20 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:47:20 LOG5 begin_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:47:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:47:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 00:47:20 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:47:20 LOG5 finish_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2008-Jan-14 00:47:20 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:47:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:47:20 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:47:20 LOG5 end_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2008-Jan-14 00:47:21 NOTE CIMA-load_config_file: Configuration file 'a2010_az180.conf' applied. 2008-Jan-14 00:47:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:47:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:47:43 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Jan-14 00:47:43 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Jan-14 00:47:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:47:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:47:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0003.fits 2008-Jan-14 00:47:44 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080114.a2010.0003.fits} 2008-Jan-14 00:48:04 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jan-14 00:48:04 LOG4 exec_msg: From OBSERVER: track_new_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Jan-14 00:48:04 LOG1 track_new_source: Calling 'track_new_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jan-14 00:48:04 BEGIN begin_task: Starting task 'selecting new source' 2008-Jan-14 00:48:04 LOG5 begin_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Selecting source 'drift107p2' ...} 2008-Jan-14 00:48:04 LOG3 track_source: Calling 'track_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Jan-14 00:48:04 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 00:48:04 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Slewing to source 'drift107p2' ...} 2008-Jan-14 00:48:04 INFO1 track_source: Starting to track drift107p2 2008-Jan-14 00:48:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:48:04 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 00:48:04 LOG3 vw_send: To DATATAKING: pnt tr 075300.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:48:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:48:04 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 00:48:04 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 00:48:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 00:48:04 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jan-14 00:48:04 START begin_task: Starting task 'applying pointing corrections' 2008-Jan-14 00:48:04 LOG5 begin_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jan-14 00:48:04 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:48:04 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jan-14 00:48:04 LOG5 finish_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Jan-14 00:48:04 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jan-14 00:48:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:04 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jan-14 00:48:04 LOG5 end_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2008-Jan-14 00:48:05 STOP finish_task: Finishing task 'selecting new source' 2008-Jan-14 00:48:05 LOG5 finish_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Jan-14 00:48:05 DONE finish_task: DONE finished selecting: new source 2008-Jan-14 00:48:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:48:05 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jan-14 00:48:05 LOG5 end_task: Level: (1) ID = <10158> Status = 0 0 0 0 ok 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: pnt tr 075300.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:12 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Jan-14 00:48:12 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Jan-14 00:48:12 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:48:12 LOG5 begin_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2008-Jan-14 00:48:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:48:12 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:48:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:48:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:48:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:12 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:48:12 LOG5 begin_task: Level: (2) ID = <10162> Status = 0 0 0 0 ok 2008-Jan-14 00:48:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:48:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:48:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:48:15 LOG5 end_task: Level: (2) ID = <10162> Status = 0 0 0 0 ok 2008-Jan-14 00:48:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:48:15 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:48:15 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Jan-14 00:48:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:48:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:48:15 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Jan-14 00:48:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:48:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:48:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:48:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Jan-14 00:48:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:48:16 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:48:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:48:16 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Jan-14 00:48:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 1.039 ALFA beam 1: 1.091 1.076 2008-Jan-14 00:48:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.081 1.101 ALFA beam 3: 0.952 1.012 2008-Jan-14 00:48:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.022 0.956 ALFA beam 5: 0.921 1.017 2008-Jan-14 00:48:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.966 0.987 ALFA beam 7: 0.955 1.069 2008-Jan-14 00:48:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:48:16 LOG5 finish_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Jan-14 00:48:16 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:48:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:48:16 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2008-Jan-14 00:48:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Jan-14 00:48:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:48:16 LOG5 finish_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2008-Jan-14 00:48:16 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:48:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:48:16 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:48:16 LOG5 end_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2008-Jan-14 00:48:25 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Jan-14 00:48:25 LOG4 exec_msg: From OBSERVER: track_new_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Jan-14 00:48:25 LOG1 track_new_source: Calling 'track_new_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Jan-14 00:48:25 BEGIN begin_task: Starting task 'selecting new source' 2008-Jan-14 00:48:25 LOG5 begin_task: Level: (1) ID = <10165> Status = 0 0 0 0 ok 2008-Jan-14 00:48:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Selecting source 'drift107p2' ...} 2008-Jan-14 00:48:25 LOG3 track_source: Calling 'track_source drift107p2 075300.0 +260212 J 0 0 main /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Jan-14 00:48:25 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 00:48:25 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Jan-14 00:48:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift107p2} INFO {Slewing to source 'drift107p2' ...} 2008-Jan-14 00:48:26 INFO1 track_source: Starting to track drift107p2 2008-Jan-14 00:48:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:48:26 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 00:48:26 LOG3 vw_send: To DATATAKING: pnt tr 075300.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:48:26 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:48:26 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 00:48:26 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 00:48:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 00:48:26 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Jan-14 00:48:26 START begin_task: Starting task 'applying pointing corrections' 2008-Jan-14 00:48:26 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Jan-14 00:48:26 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:48:26 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Jan-14 00:48:26 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Jan-14 00:48:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:26 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Jan-14 00:48:26 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 STOP finish_task: Finishing task 'selecting new source' 2008-Jan-14 00:48:26 LOG5 finish_task: Level: (1) ID = <10165> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 DONE finish_task: DONE finished selecting: new source 2008-Jan-14 00:48:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:48:26 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Jan-14 00:48:26 LOG5 end_task: Level: (1) ID = <10165> Status = 0 0 0 0 ok 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift107p2" 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: pnt tr 075300.0 +260212 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Jan-14 00:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:30 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Jan-14 00:48:30 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical) 2008-Jan-14 00:48:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 testdrift 042200.0 +260212 J 0 Topocentric velocity(optical)' 2008-Jan-14 00:48:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jan-14 00:48:30 LOG5 begin_task: Level: (1) ID = <10168> Status = 0 0 0 0 ok 2008-Jan-14 00:48:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift107p2' 2008-Jan-14 00:48:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jan-14 00:48:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {testdrift} 2008-Jan-14 00:48:30 INFO5 fixed_driftmap: Start: year = 2008.0384220916674 RA = 04:22:31.1 Dec = +26:03:30.6 2008-Jan-14 00:48:30 NOTE fixed_driftmap: Setting ZA to 7:42:16.9 ... 2008-Jan-14 00:48:30 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 7.70 2008-Jan-14 00:48:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.7047023551 -CF 2008-Jan-14 00:48:30 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:48:30 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Jan-14 00:48:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:48:30 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:48:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Jan-14 00:48:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 00:48:30 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 00:48:30 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Jan-14 00:48:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.7047023551 -CF 2008-Jan-14 00:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:48:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:48:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:48:31 LOG5 finish_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:48:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 00:48:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 00:48:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:31 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 00:48:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:48:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 00:48:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:48:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 00:48:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:48:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:48:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:48:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:48:31 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 00:48:31 LOG5 finish_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 00:48:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 00:48:31 LOG5 end_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:48:31 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:48:31 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:48:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:48:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:31 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:48:31 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:48:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:34 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:48:34 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:48:34 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Jan-14 00:48:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:48:34 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:48:34 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Jan-14 00:48:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:48:34 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:34 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:34 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:34 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:48:34 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:48:34 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Jan-14 00:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:48:35 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:48:35 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:48:35 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Jan-14 00:48:35 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:48:35 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:48:35 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:48:35 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.951 1.046 ALFA beam 1: 1.100 1.082 2008-Jan-14 00:48:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.080 0.875 ALFA beam 3: 0.957 1.036 2008-Jan-14 00:48:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.024 0.957 ALFA beam 5: 0.925 1.023 2008-Jan-14 00:48:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.997 1.022 ALFA beam 7: 0.972 1.099 2008-Jan-14 00:48:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:48:35 LOG5 finish_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:35 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:48:35 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 00:48:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:48:35 LOG5 finish_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:48:35 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:48:35 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 04:22:31.1 LST = 07:53:43.7 diff = -12672.6 secs 2008-Jan-14 00:48:35 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Jan-14 00:48:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 00:48:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:48:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:48:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:48:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:48:35 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080114.a2010.0003.fits' is empty! 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 00:48:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 00:48:35 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 00:48:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 00:48:35 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Jan-14 00:48:35 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 00:48:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 00:48:35 INFO2 take_spectra: Starting WAPP scan: 801400031 2008-Jan-14 00:48:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 00:48:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 00:48:36 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Jan-14 00:48:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:48:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:48:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17317.00 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 00:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 00:48:38 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2008-Jan-14 00:48:41 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2008-Jan-14 00:49:45 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Jan-14 00:49:45 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Jan-14 00:49:45 WARNING abort_task: WARNING abort requested! 2008-Jan-14 00:49:45 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Jan-14 00:49:45 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Jan-14 00:49:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Jan-14 00:49:45 LOG5 end_task: Level: (3) ID = <10180> Status = 1 0 0 0 abort 2008-Jan-14 00:49:45 START begin_task: Starting task 'stopping the WAPPs' 2008-Jan-14 00:49:45 LOG5 begin_task: Level: (3) ID = <10181> Status = 1 0 0 0 abort 2008-Jan-14 00:49:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Jan-14 00:49:45 INFO1 stop_wapp: Stopping the WAPPs 2008-Jan-14 00:49:45 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Jan-14 00:49:45 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Jan-14 00:49:45 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Jan-14 00:49:45 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Jan-14 00:49:45 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Jan-14 00:49:45 LOG5 begin_task: Level: (4) ID = <10182> Status = 1 0 0 0 abort 2008-Jan-14 00:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Jan-14 00:49:46 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Jan-14 00:49:46 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Jan-14 00:49:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 00:49:46 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Jan-14 00:49:46 LOG5 end_task: Level: (4) ID = <10182> Status = 1 0 0 0 abort 2008-Jan-14 00:49:46 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Jan-14 00:49:46 LOG5 end_task: Level: (3) ID = <10181> Status = 1 0 0 0 abort 2008-Jan-14 00:49:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Jan-14 00:49:46 LOG5 end_task: Level: (2) ID = <10179> Status = 1 0 0 0 abort 2008-Jan-14 00:49:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jan-14 00:49:46 LOG5 finish_task: Level: (1) ID = <10168> Status = 1 0 0 0 abort 2008-Jan-14 00:49:46 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Jan-14 00:49:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Jan-14 00:49:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Jan-14 00:49:46 LOG5 end_task: Level: (1) ID = <10168> Status = 1 0 0 0 abort 2008-Jan-14 00:49:56 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Jan-14 00:49:56 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Jan-14 00:49:56 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Jan-14 00:49:56 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Jan-14 00:49:56 LOG5 begin_task: Level: (1) ID = <10183> Status = 0 0 0 0 ok 2008-Jan-14 00:49:56 NOTE restart_wapp: Restarting all WAPPs 2008-Jan-14 00:49:56 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Jan-14 00:49:57 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Jan-14 00:49:57 LOG5 end_task: Level: (1) ID = <10183> Status = 0 0 0 0 ok 2008-Jan-14 00:49:57 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:49:57 LOG3 exec_msg: Closing socket 2008-Jan-14 00:49:57 LOG3 exec_msg: Closing socket 2008-Jan-14 00:49:57 LOG3 exec_msg: Closing socket 2008-Jan-14 00:49:57 LOG3 exec_msg: Closing socket 2008-Jan-14 00:49:59 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Jan-14 00:49:59 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Jan-14 00:49:59 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Jan-14 00:49:59 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Jan-14 00:50:07 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180.conf' 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 00:50:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:50:09 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Jan-14 00:50:09 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Jan-14 00:50:09 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 00:50:09 LOG5 begin_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2008-Jan-14 00:50:09 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 00:50:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 00:50:09 LOG1 config_iflo: Receiver ALFA already selected 2008-Jan-14 00:50:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:50:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:50:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:50:10 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:50:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:50:10 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:50:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:50:10 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jan-14 00:50:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jan-14 00:50:10 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 00:50:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jan-14 00:50:10 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jan-14 00:50:10 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jan-14 00:50:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 00:50:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:10 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 00:50:10 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 00:50:10 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 00:50:10 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 00:50:10 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 00:50:10 LOG5 finish_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 00:50:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:50:10 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 00:50:10 LOG5 end_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2008-Jan-14 00:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 00:50:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 00:50:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 00:50:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 00:50:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jan-14 00:50:11 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Jan-14 00:50:11 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Jan-14 00:50:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 00:50:11 LOG5 begin_task: Level: (1) ID = <10187> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 00:50:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 00:50:11 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 00:50:11 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 00:50:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 00:50:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:11 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 00:50:11 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Jan-14 00:50:11 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 00:50:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:50:11 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 00:50:11 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 00:50:11 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 00:50:11 LOG5 finish_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 00:50:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:11 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 00:50:11 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 00:50:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 00:50:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 00:50:12 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 00:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 00:50:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 00:50:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:50:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 00:50:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 00:50:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 00:50:12 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jan-14 00:50:12 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 00:50:12 LOG5 finish_task: Level: (1) ID = <10187> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 00:50:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:50:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 00:50:12 LOG5 end_task: Level: (1) ID = <10187> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 00:50:12 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Jan-14 00:50:12 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Jan-14 00:50:12 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:50:12 LOG5 begin_task: Level: (1) ID = <10191> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:50:12 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:50:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 00:50:12 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:50:12 LOG5 finish_task: Level: (1) ID = <10191> Status = 0 0 0 0 ok 2008-Jan-14 00:50:12 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:50:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:50:12 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:50:12 LOG5 end_task: Level: (1) ID = <10191> Status = 0 0 0 0 ok 2008-Jan-14 00:50:13 NOTE CIMA-load_config_file: Configuration file 'a2010_az180.conf' applied. 2008-Jan-14 00:50:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:50:13 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:50:19 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Jan-14 00:50:19 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Jan-14 00:50:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:50:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0004.fits 2008-Jan-14 00:50:20 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080114.a2010.0004.fits} 2008-Jan-14 00:50:46 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Jan-14 00:50:46 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Jan-14 00:50:46 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:50:47 LOG5 begin_task: Level: (1) ID = <10192> Status = 0 0 0 0 ok 2008-Jan-14 00:50:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:50:47 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:50:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:50:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:50:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:47 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:50:47 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2008-Jan-14 00:50:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:50:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:50:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:50:49 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2008-Jan-14 00:50:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:50:49 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:50:49 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Jan-14 00:50:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:50:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:50:50 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Jan-14 00:50:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:50:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Jan-14 00:50:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:50:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:50:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:50:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:50:50 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Jan-14 00:50:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.929 1.044 ALFA beam 1: 1.093 1.076 2008-Jan-14 00:50:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.081 1.102 ALFA beam 3: 0.953 1.012 2008-Jan-14 00:50:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.041 0.973 ALFA beam 5: 0.927 1.019 2008-Jan-14 00:50:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.967 0.985 ALFA beam 7: 0.954 1.061 2008-Jan-14 00:50:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:50:50 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Jan-14 00:50:50 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:50:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:50:50 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2008-Jan-14 00:50:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Jan-14 00:50:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:50:50 LOG5 finish_task: Level: (1) ID = <10192> Status = 0 0 0 0 ok 2008-Jan-14 00:50:50 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:50:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 00:50:50 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:50:50 LOG5 end_task: Level: (1) ID = <10192> Status = 0 0 0 0 ok 2008-Jan-14 00:50:52 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Jan-14 00:50:52 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 drift107p2 075600.0 +260212 J 0 Topocentric velocity(optical) 2008-Jan-14 00:50:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no first 1 drift107p2 075600.0 +260212 J 0 Topocentric velocity(optical)' 2008-Jan-14 00:50:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Jan-14 00:50:52 LOG5 begin_task: Level: (1) ID = <10196> Status = 0 0 0 0 ok 2008-Jan-14 00:50:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'testdrift' 2008-Jan-14 00:50:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Jan-14 00:50:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift107p2} 2008-Jan-14 00:50:52 INFO5 fixed_driftmap: Start: year = 2008.038426623064 RA = 07:56:31.6 Dec = +26:00:54.5 2008-Jan-14 00:50:52 NOTE fixed_driftmap: Setting ZA to 7:39:40.8 ... 2008-Jan-14 00:50:52 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 7.66 2008-Jan-14 00:50:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6613258162 -CF 2008-Jan-14 00:50:52 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:50:52 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2008-Jan-14 00:50:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 00:50:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 00:50:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Jan-14 00:50:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 00:50:53 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 00:50:53 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Jan-14 00:50:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6613258162 -CF 2008-Jan-14 00:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:53 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 00:50:53 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 00:50:53 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 00:50:53 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Jan-14 00:50:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:50:53 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 00:50:53 LOG5 finish_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2008-Jan-14 00:50:53 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 00:50:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:53 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 00:50:53 LOG5 end_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2008-Jan-14 00:50:53 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 00:50:53 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Jan-14 00:50:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 00:50:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 00:50:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:53 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 00:50:53 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:50:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 00:50:54 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 00:50:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:50:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 00:50:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:50:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:50:54 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:50:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 00:50:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 00:50:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:50:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 00:50:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 00:50:54 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 00:50:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 00:50:54 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 00:50:54 LOG5 finish_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 00:50:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 00:50:54 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 00:50:54 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 00:50:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 00:50:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 00:50:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:54 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 00:50:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 00:50:54 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 00:50:54 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 00:50:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 00:50:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 00:50:54 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Jan-14 00:50:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 00:50:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 00:50:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 00:50:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 00:50:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2008-Jan-14 00:50:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 00:50:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 00:50:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 00:50:55 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Jan-14 00:50:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.949 1.039 ALFA beam 1: 1.093 1.077 2008-Jan-14 00:50:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.074 0.869 ALFA beam 3: 0.952 1.031 2008-Jan-14 00:50:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.038 0.966 ALFA beam 5: 0.923 1.018 2008-Jan-14 00:50:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.991 1.017 ALFA beam 7: 0.967 1.091 2008-Jan-14 00:50:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:50:55 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jan-14 00:50:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 00:50:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:50:55 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Jan-14 00:50:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 00:50:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 00:50:55 LOG5 finish_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Jan-14 00:50:55 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 00:50:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 00:50:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 00:50:55 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Jan-14 00:50:55 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 07:56:31.6 LST = 07:56:04.0 diff = 27.6 secs 2008-Jan-14 00:50:55 INFO2 fixed_driftmap: Waiting 25.6 seconds for RA 7:56:32 2008-Jan-14 00:50:55 INFO2 lstwait: Waiting for 25.5 secs from LST 07:56:04 to LST 07:56:30 ... 2008-Jan-14 00:50:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 25.496255546715442 BITMAP stat_wait MESSAGE {Waiting ...} 2008-Jan-14 00:50:55 START begin_task: Starting task 'waiting on wait on LST' 2008-Jan-14 00:50:55 LOG5 begin_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Jan-14 00:51:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2008-Jan-14 00:51:21 LOG5 end_task: Level: (2) ID = <10207> Status = 0 0 0 0 ok 2008-Jan-14 00:51:21 LOG4 lstwait: Finished waiting, the gui caused difference: -0.49566111999759244 2008-Jan-14 00:51:21 INFO3 lstwait: Finished waiting 2008-Jan-14 00:51:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jan-14 00:51:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Jan-14 00:51:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 00:51:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 00:51:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 00:51:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 00:51:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 00:51:21 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080114.a2010.0004.fits' is empty! 2008-Jan-14 00:51:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 00:51:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 00:51:21 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 00:51:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 00:51:21 LOG5 begin_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2008-Jan-14 00:51:21 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 00:51:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 00:51:21 INFO2 take_spectra: Starting WAPP scan: 801400032 2008-Jan-14 00:51:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 00:51:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 00:51:21 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Jan-14 00:51:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 00:51:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 00:51:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17482.00 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 00:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:01:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:01:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:01:22 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Jan-14 01:01:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:01:22 LOG5 end_task: Level: (2) ID = <10208> Status = 0 0 0 0 ok 2008-Jan-14 01:01:22 LOG1 fixed_driftmap: New position: year = 2008.0384465865593 RA = 08:06:01.9 RA/Dec = 08:06:33.4 +26:00:47.7 2008-Jan-14 01:01:22 NOTE fixed_driftmap: Correcting ZA to 7:39:34.0 ... 2008-Jan-14 01:01:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6594408131 -CF 2008-Jan-14 01:01:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:01:22 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:01:22 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Jan-14 01:01:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:01:22 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:01:22 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:01:22 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Jan-14 01:01:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:01:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:01:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:01:22 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:01:22 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Jan-14 01:01:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6594408131 -CF 2008-Jan-14 01:01:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:01:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:01:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:01:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:01:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:01:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:01:23 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:01:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:01:23 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:01:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:01:23 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:01:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:01:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:01:23 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:01:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:01:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:01:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:01:23 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:01:23 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:01:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:01:23 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:01:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:01:23 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:01:23 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:01:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:01:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:01:23 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:01:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:01:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:01:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:01:23 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:01:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:01:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:01:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:01:23 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:01:23 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:01:23 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:01:23 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Jan-14 01:01:23 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:01:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:01:23 INFO2 take_spectra: Starting WAPP scan: 801400033 2008-Jan-14 01:01:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:01:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:01:24 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Jan-14 01:01:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:01:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18085.00 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:01:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:01:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:01:26 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:01:26 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:01:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:01:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:01:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:01:26 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:01:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:01:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:01:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:01:26 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:01:26 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:01:26 LOG5 finish_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:01:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:01:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:01:26 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2008-Jan-14 01:01:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Jan-14 01:01:26 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Jan-14 01:01:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:01:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:01:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:01:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:01:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:01:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:01:27 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:01:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:01:27 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Jan-14 01:01:27 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:01:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:01:27 INFO2 take_spectra: Starting WAPP scan: 801400034 2008-Jan-14 01:01:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:01:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:01:27 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Jan-14 01:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:01:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0005.fits 2008-Jan-14 01:01:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0005.fits} 2008-Jan-14 01:01:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18088.00 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:11:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:11:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:11:28 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Jan-14 01:11:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:11:28 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2008-Jan-14 01:11:28 LOG1 fixed_driftmap: New position: year = 2008.0384657895404 RA = 08:16:09.7 RA/Dec = 08:16:41.0 +26:00:41.0 2008-Jan-14 01:11:28 NOTE fixed_driftmap: Correcting ZA to 7:39:27.3 ... 2008-Jan-14 01:11:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6575811844 -CF 2008-Jan-14 01:11:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:11:28 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:11:28 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Jan-14 01:11:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:11:28 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:11:28 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:11:28 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Jan-14 01:11:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:11:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:11:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:11:28 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:11:28 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6575811844 -CF 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:11:28 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:11:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:11:28 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:11:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:11:29 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:11:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:11:29 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:11:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:11:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:11:29 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:11:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:11:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:11:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:11:29 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:11:29 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:11:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:11:29 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:11:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:11:29 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:11:29 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:11:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:11:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:11:29 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:11:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:11:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:11:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:11:29 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:11:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:11:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:11:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:11:29 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Jan-14 01:11:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:11:29 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:11:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:11:29 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Jan-14 01:11:30 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:11:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:11:30 INFO2 take_spectra: Starting WAPP scan: 801400035 2008-Jan-14 01:11:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:11:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:11:30 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Jan-14 01:11:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:11:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18691.00 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:11:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:11:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:11:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:11:32 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:11:32 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:11:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:11:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:11:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:11:32 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:11:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:11:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:11:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:11:32 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:11:32 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:11:32 LOG5 finish_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:11:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:11:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:11:32 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2008-Jan-14 01:11:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Jan-14 01:11:32 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Jan-14 01:11:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:11:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:11:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:11:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:11:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:11:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:11:33 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:11:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:11:33 LOG5 begin_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2008-Jan-14 01:11:33 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:11:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:11:33 INFO2 take_spectra: Starting WAPP scan: 801400036 2008-Jan-14 01:11:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:11:33 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:11:33 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Jan-14 01:11:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:11:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:11:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0006.fits 2008-Jan-14 01:11:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0006.fits} 2008-Jan-14 01:11:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18694.00 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:16:22 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:16:22.297 (seconds: 4582.297)!} 2008-Jan-14 01:16:22 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:16:22.297 (seconds: 4582.297)! 2008-Jan-14 01:16:23 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 4581.0 to 4582.0! 2008-Jan-14 01:16:24 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (4581.0 - 4583.0)! 2008-Jan-14 01:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:21:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:21:34 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Jan-14 01:21:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:21:34 LOG5 end_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2008-Jan-14 01:21:34 LOG1 fixed_driftmap: New position: year = 2008.0384849925217 RA = 08:26:17.5 RA/Dec = 08:26:48.7 +26:00:34.5 2008-Jan-14 01:21:34 NOTE fixed_driftmap: Correcting ZA to 7:39:20.8 ... 2008-Jan-14 01:21:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6557692328 -CF 2008-Jan-14 01:21:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:21:34 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:21:34 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Jan-14 01:21:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:21:34 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:21:34 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:21:34 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Jan-14 01:21:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:21:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:21:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:21:34 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:21:34 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Jan-14 01:21:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6557692328 -CF 2008-Jan-14 01:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:21:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:21:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:21:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:21:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:21:35 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2008-Jan-14 01:21:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:21:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:21:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:21:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:21:35 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Jan-14 01:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:21:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:21:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:21:36 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:21:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:21:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:21:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:21:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:21:36 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:21:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:21:36 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:21:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:21:36 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:21:36 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:21:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:21:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:21:36 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:21:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:21:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:21:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:21:36 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:21:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:21:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:21:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:21:36 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:21:36 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:21:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:21:36 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:21:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:21:36 INFO2 take_spectra: Starting WAPP scan: 801400037 2008-Jan-14 01:21:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:21:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:21:36 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Jan-14 01:21:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:21:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19297.00 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:21:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:21:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:21:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:21:38 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:21:38 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:21:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:21:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:21:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:21:38 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:21:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:21:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:21:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:21:38 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:21:38 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:21:38 LOG5 finish_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:21:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:21:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:21:38 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2008-Jan-14 01:21:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Jan-14 01:21:38 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Jan-14 01:21:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:21:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:21:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:21:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:21:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:21:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:21:39 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:21:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:21:39 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Jan-14 01:21:39 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:21:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:21:39 INFO2 take_spectra: Starting WAPP scan: 801400038 2008-Jan-14 01:21:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:21:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:21:39 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Jan-14 01:21:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:21:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:21:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0007.fits 2008-Jan-14 01:21:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0007.fits} 2008-Jan-14 01:21:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19300.00 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:21:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:31:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:31:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:31:40 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:31:40 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 LOG1 fixed_driftmap: New position: year = 2008.0385041955028 RA = 08:36:25.3 RA/Dec = 08:36:56.4 +26:00:28.1 2008-Jan-14 01:31:40 NOTE fixed_driftmap: Correcting ZA to 7:39:14.4 ... 2008-Jan-14 01:31:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6540084961 -CF 2008-Jan-14 01:31:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:31:40 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:31:40 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:31:40 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:31:40 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:31:40 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:31:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:31:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:31:40 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:31:40 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6540084961 -CF 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:31:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:31:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:31:40 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2008-Jan-14 01:31:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:31:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:31:41 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:31:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:31:41 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:31:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:31:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:31:41 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:31:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:31:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:31:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:31:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:31:41 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:31:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:31:41 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:31:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:31:41 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:31:41 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:31:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:31:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:31:41 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:31:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:31:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:31:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:31:41 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:31:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:31:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:31:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:31:41 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:31:41 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:31:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:31:41 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:31:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:31:41 INFO2 take_spectra: Starting WAPP scan: 801400039 2008-Jan-14 01:31:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:31:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:31:41 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Jan-14 01:31:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:31:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19902.00 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:31:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:31:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:31:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:31:43 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:31:43 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:31:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:31:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:31:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:31:43 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:31:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:31:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:31:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:31:43 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:31:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:31:43 LOG5 finish_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:31:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:31:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:31:43 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2008-Jan-14 01:31:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Jan-14 01:31:43 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Jan-14 01:31:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:31:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:31:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:31:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:31:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:31:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:31:44 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:31:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:31:44 LOG5 begin_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Jan-14 01:31:44 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:31:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:31:44 INFO2 take_spectra: Starting WAPP scan: 801400040 2008-Jan-14 01:31:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:31:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:31:44 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Jan-14 01:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:31:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0008.fits 2008-Jan-14 01:31:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0008.fits} 2008-Jan-14 01:31:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19905.00 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:31:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:41:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:41:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:41:45 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Jan-14 01:41:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:41:45 LOG5 end_task: Level: (2) ID = <10252> Status = 0 0 0 0 ok 2008-Jan-14 01:41:45 LOG1 fixed_driftmap: New position: year = 2008.038523366796 RA = 08:46:32.1 RA/Dec = 08:47:03.0 +26:00:22.0 2008-Jan-14 01:41:45 NOTE fixed_driftmap: Correcting ZA to 7:39:08.3 ... 2008-Jan-14 01:41:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6523051746 -CF 2008-Jan-14 01:41:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:41:45 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:41:45 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Jan-14 01:41:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:41:45 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:41:45 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:41:45 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Jan-14 01:41:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:41:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:41:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:41:45 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:41:45 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Jan-14 01:41:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6523051746 -CF 2008-Jan-14 01:41:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:41:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:41:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:41:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:41:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:41:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:41:46 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:41:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:41:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:41:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:41:46 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:41:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:41:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:41:46 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:41:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:41:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:41:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:41:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:41:46 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:41:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:41:46 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:41:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:41:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:41:46 LOG5 finish_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:41:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:41:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:41:46 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:41:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:41:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:41:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:41:46 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:41:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:41:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:41:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:41:46 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:41:46 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:41:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:41:46 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:41:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:41:46 INFO2 take_spectra: Starting WAPP scan: 801400041 2008-Jan-14 01:41:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:41:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:41:46 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Jan-14 01:41:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:41:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20507.00 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:41:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:41:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:41:48 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:41:48 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:41:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:41:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:41:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:41:48 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:41:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:41:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:41:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:41:48 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:41:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:41:48 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:41:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:41:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:41:48 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Jan-14 01:41:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Jan-14 01:41:49 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Jan-14 01:41:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:41:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:41:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:41:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:41:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:41:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:41:49 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:41:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:41:49 LOG5 begin_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2008-Jan-14 01:41:49 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:41:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:41:49 INFO2 take_spectra: Starting WAPP scan: 801400042 2008-Jan-14 01:41:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:41:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:41:49 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Jan-14 01:41:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:41:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:41:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0009.fits 2008-Jan-14 01:41:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0009.fits} 2008-Jan-14 01:41:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20510.00 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:46:20 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:46:20.296 (seconds: 6380.296)!} 2008-Jan-14 01:46:20 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:46:20.296 (seconds: 6380.296)! 2008-Jan-14 01:46:21 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 6379.0 to 6380.0! 2008-Jan-14 01:46:22 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (6379.0 - 6381.0)! 2008-Jan-14 01:51:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:51:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:51:50 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2008-Jan-14 01:51:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:51:50 LOG5 end_task: Level: (2) ID = <10263> Status = 0 0 0 0 ok 2008-Jan-14 01:51:50 LOG1 fixed_driftmap: New position: year = 2008.0385425380891 RA = 08:56:38.9 RA/Dec = 08:57:09.7 +26:00:16.1 2008-Jan-14 01:51:50 NOTE fixed_driftmap: Correcting ZA to 7:39:02.4 ... 2008-Jan-14 01:51:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6506596411 -CF 2008-Jan-14 01:51:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 01:51:50 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 01:51:50 LOG5 begin_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Jan-14 01:51:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 01:51:50 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 01:51:50 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 01:51:50 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Jan-14 01:51:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 01:51:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 01:51:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:51:50 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 01:51:50 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Jan-14 01:51:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6506596411 -CF 2008-Jan-14 01:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:51:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 01:51:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 01:51:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:51:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 01:51:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 01:51:51 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 01:51:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:51:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 01:51:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:51:51 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 01:51:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:51:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:51:51 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:51:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 01:51:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 01:51:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:51:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 01:51:51 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 01:51:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 01:51:51 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 01:51:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 01:51:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 01:51:51 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 01:51:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:51:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 01:51:51 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 01:51:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 01:51:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 01:51:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:51:51 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:51:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 01:51:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:51:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:51:51 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 01:51:51 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 01:51:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:51:51 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 01:51:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:51:51 INFO2 take_spectra: Starting WAPP scan: 801400043 2008-Jan-14 01:51:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 01:51:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:51:51 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Jan-14 01:51:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:51:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21112.00 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 01:51:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 01:51:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 01:51:53 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 01:51:53 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 01:51:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 01:51:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 01:51:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 01:51:53 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 01:51:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 01:51:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 01:51:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 01:51:53 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 01:51:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 01:51:53 LOG5 finish_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 01:51:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 01:51:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 01:51:53 LOG5 end_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2008-Jan-14 01:51:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Jan-14 01:51:54 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Jan-14 01:51:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 01:51:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 01:51:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 01:51:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 01:51:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 01:51:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 01:51:54 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 01:51:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 01:51:54 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-Jan-14 01:51:54 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 01:51:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 01:51:54 INFO2 take_spectra: Starting WAPP scan: 801400044 2008-Jan-14 01:51:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 01:51:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 01:51:54 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Jan-14 01:51:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 01:51:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 01:51:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0010.fits 2008-Jan-14 01:51:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0010.fits} 2008-Jan-14 01:51:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21115.00 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 01:51:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:01:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:01:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:01:55 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2008-Jan-14 02:01:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:01:55 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2008-Jan-14 02:01:55 LOG1 fixed_driftmap: New position: year = 2008.0385617093823 RA = 09:06:45.8 RA/Dec = 09:07:16.3 +26:00:10.4 2008-Jan-14 02:01:55 NOTE fixed_driftmap: Correcting ZA to 7:38:56.7 ... 2008-Jan-14 02:01:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6490750982 -CF 2008-Jan-14 02:01:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:01:55 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:01:55 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Jan-14 02:01:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:01:55 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:01:55 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:01:55 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Jan-14 02:01:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:01:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:01:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:01:55 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:01:55 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Jan-14 02:01:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6490750982 -CF 2008-Jan-14 02:01:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:01:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:01:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:01:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:01:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:01:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:01:56 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:01:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:01:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:01:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:01:56 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:01:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:01:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:01:56 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:01:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:01:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:01:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:01:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:01:56 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:01:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:01:56 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:01:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:01:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:01:56 LOG5 finish_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:01:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:01:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:01:56 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:01:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:01:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:01:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:01:56 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:01:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:01:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:01:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:01:56 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:01:56 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:01:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:01:56 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Jan-14 02:01:56 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:01:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:01:56 INFO2 take_spectra: Starting WAPP scan: 801400045 2008-Jan-14 02:01:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:01:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:01:57 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Jan-14 02:01:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:01:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21718.00 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:01:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:01:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:01:59 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:01:59 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:01:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:01:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:01:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:01:59 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:01:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:01:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:01:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:01:59 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:01:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:01:59 LOG5 finish_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:01:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:01:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:01:59 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2008-Jan-14 02:01:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Jan-14 02:01:59 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Jan-14 02:01:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:02:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:02:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:02:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:02:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:02:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:02:00 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:02:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:02:00 LOG5 begin_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2008-Jan-14 02:02:00 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:02:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:02:00 INFO2 take_spectra: Starting WAPP scan: 801400046 2008-Jan-14 02:02:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:02:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:02:00 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Jan-14 02:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:02:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0011.fits 2008-Jan-14 02:02:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0011.fits} 2008-Jan-14 02:02:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21721.00 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:12:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:12:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:12:01 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Jan-14 02:12:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:12:01 LOG5 end_task: Level: (2) ID = <10285> Status = 0 0 0 0 ok 2008-Jan-14 02:12:01 LOG1 fixed_driftmap: New position: year = 2008.0385809123634 RA = 09:16:53.7 RA/Dec = 09:17:24.0 +26:00:04.9 2008-Jan-14 02:12:01 NOTE fixed_driftmap: Correcting ZA to 7:38:51.2 ... 2008-Jan-14 02:12:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6475521686 -CF 2008-Jan-14 02:12:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:12:01 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:12:01 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Jan-14 02:12:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:12:01 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:12:01 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:12:01 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Jan-14 02:12:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:12:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:12:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:12:01 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:12:01 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Jan-14 02:12:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6475521686 -CF 2008-Jan-14 02:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:12:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:12:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:12:02 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:12:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:12:02 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:12:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:12:02 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:12:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:12:02 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:12:02 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:12:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:12:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:12:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:12:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:12:02 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:12:02 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:12:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:12:02 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:12:02 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:12:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:12:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:12:02 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:12:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:12:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:12:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:12:02 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:12:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:12:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:12:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:12:02 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:12:02 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:12:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:12:02 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Jan-14 02:12:02 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:12:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:12:02 INFO2 take_spectra: Starting WAPP scan: 801400047 2008-Jan-14 02:12:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:12:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:12:03 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Jan-14 02:12:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:12:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22324.00 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:12:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:12:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:12:05 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:12:05 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:12:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:12:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:12:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:12:05 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:12:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:12:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:12:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:12:05 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:12:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:12:05 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:12:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:12:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:12:05 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2008-Jan-14 02:12:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Jan-14 02:12:05 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Jan-14 02:12:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:12:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:12:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:12:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:12:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:12:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:12:06 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:12:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:12:06 LOG5 begin_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2008-Jan-14 02:12:06 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:12:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:12:06 INFO2 take_spectra: Starting WAPP scan: 801400048 2008-Jan-14 02:12:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:12:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:12:06 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Jan-14 02:12:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:12:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:12:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0012.fits 2008-Jan-14 02:12:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0012.fits} 2008-Jan-14 02:12:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22327.00 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:22:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:22:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:22:07 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Jan-14 02:22:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:22:07 LOG5 end_task: Level: (2) ID = <10296> Status = 0 0 0 0 ok 2008-Jan-14 02:22:07 LOG1 fixed_driftmap: New position: year = 2008.0386001153447 RA = 09:27:01.5 RA/Dec = 09:27:31.7 +25:59:59.6 2008-Jan-14 02:22:07 NOTE fixed_driftmap: Correcting ZA to 7:38:45.9 ... 2008-Jan-14 02:22:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6460965088 -CF 2008-Jan-14 02:22:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:22:07 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:22:07 LOG5 begin_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Jan-14 02:22:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:22:07 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:22:07 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:22:07 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Jan-14 02:22:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:22:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:22:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:22:07 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:22:07 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6460965088 -CF 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:22:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:22:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:22:07 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Jan-14 02:22:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:22:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:22:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:22:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:22:08 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Jan-14 02:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:22:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:22:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:22:09 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:22:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:22:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:22:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:22:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:22:09 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:22:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:22:09 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:22:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:22:09 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:22:09 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:22:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:22:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:22:09 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:22:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:22:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:22:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:22:09 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:22:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:22:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:22:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:22:09 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:22:09 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:22:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:22:09 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:22:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:22:09 INFO2 take_spectra: Starting WAPP scan: 801400049 2008-Jan-14 02:22:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:22:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:22:09 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Jan-14 02:22:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:22:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22930.00 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:22:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:22:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:22:11 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:22:11 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:22:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:22:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:22:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:22:11 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:22:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:22:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:22:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:22:11 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:22:11 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:22:11 LOG5 finish_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:22:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:22:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:22:11 LOG5 end_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2008-Jan-14 02:22:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Jan-14 02:22:11 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Jan-14 02:22:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:22:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:22:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:22:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:22:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:22:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:22:12 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:22:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:22:12 LOG5 begin_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Jan-14 02:22:12 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:22:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:22:12 INFO2 take_spectra: Starting WAPP scan: 801400050 2008-Jan-14 02:22:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:22:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:22:12 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Jan-14 02:22:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:22:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:22:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0013.fits 2008-Jan-14 02:22:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0013.fits} 2008-Jan-14 02:22:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22933.00 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:22:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:32:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:32:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:32:13 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Jan-14 02:32:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:32:13 LOG5 end_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Jan-14 02:32:13 LOG1 fixed_driftmap: New position: year = 2008.0386193183258 RA = 09:37:09.4 RA/Dec = 09:37:39.3 +25:59:54.7 2008-Jan-14 02:32:13 NOTE fixed_driftmap: Correcting ZA to 7:38:41.0 ... 2008-Jan-14 02:32:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6447109607 -CF 2008-Jan-14 02:32:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:32:13 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:32:13 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Jan-14 02:32:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:32:13 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:32:13 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:32:13 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Jan-14 02:32:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:32:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:32:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:32:13 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:32:13 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6447109607 -CF 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:32:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:32:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:32:13 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:32:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:32:14 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:32:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:32:14 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:32:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:32:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:32:14 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:32:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:32:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:32:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:32:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:32:14 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:32:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:32:14 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:32:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:32:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:32:14 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:32:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:32:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:32:14 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:32:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:32:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:32:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:32:14 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:32:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:32:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:32:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:32:14 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:32:14 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:32:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:32:14 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:32:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:32:14 INFO2 take_spectra: Starting WAPP scan: 801400051 2008-Jan-14 02:32:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:32:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:32:14 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Jan-14 02:32:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:32:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23535.00 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:32:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:32:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:32:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:32:16 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:32:16 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:32:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:32:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:32:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:32:16 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:32:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:32:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:32:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:32:16 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:32:16 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:32:16 LOG5 finish_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:32:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:32:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:32:16 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2008-Jan-14 02:32:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Jan-14 02:32:16 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Jan-14 02:32:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:32:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:32:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:32:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:32:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:32:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:32:17 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:32:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:32:17 LOG5 begin_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2008-Jan-14 02:32:17 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:32:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:32:17 INFO2 take_spectra: Starting WAPP scan: 801400052 2008-Jan-14 02:32:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:32:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:32:17 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Jan-14 02:32:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:32:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:32:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0014.fits 2008-Jan-14 02:32:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0014.fits} 2008-Jan-14 02:32:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23538.00 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:32:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:42:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:42:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:42:18 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Jan-14 02:42:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:42:18 LOG5 end_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2008-Jan-14 02:42:18 LOG1 fixed_driftmap: New position: year = 2008.038638489619 RA = 09:47:16.3 RA/Dec = 09:47:46.0 +25:59:49.9 2008-Jan-14 02:42:18 NOTE fixed_driftmap: Correcting ZA to 7:38:36.2 ... 2008-Jan-14 02:42:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6434003219 -CF 2008-Jan-14 02:42:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:42:18 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:42:18 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Jan-14 02:42:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:42:18 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:42:18 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:42:18 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Jan-14 02:42:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:42:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:42:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:42:18 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:42:18 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Jan-14 02:42:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6434003219 -CF 2008-Jan-14 02:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:42:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:42:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:42:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:42:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:42:19 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:42:19 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:42:19 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:42:19 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:42:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:42:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:42:19 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:42:19 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:42:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:42:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:42:19 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:42:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:42:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:42:19 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:42:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:42:19 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:42:19 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:42:19 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:42:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:42:19 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:42:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:42:19 INFO2 take_spectra: Starting WAPP scan: 801400053 2008-Jan-14 02:42:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:42:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:42:19 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Jan-14 02:42:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24140.00 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:42:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:42:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:42:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:42:21 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:42:21 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:42:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:42:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:42:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:42:21 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:42:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:42:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:42:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:42:21 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:42:21 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:42:21 LOG5 finish_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:42:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:42:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:42:21 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2008-Jan-14 02:42:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Jan-14 02:42:22 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Jan-14 02:42:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:42:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:42:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:42:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:42:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:42:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:42:22 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:42:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:42:22 LOG5 begin_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2008-Jan-14 02:42:22 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:42:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:42:22 INFO2 take_spectra: Starting WAPP scan: 801400054 2008-Jan-14 02:42:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:42:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:42:22 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Jan-14 02:42:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:42:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:42:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0015.fits 2008-Jan-14 02:42:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0015.fits} 2008-Jan-14 02:42:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24143.00 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:42:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:52:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:52:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:52:23 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2008-Jan-14 02:52:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:52:23 LOG5 end_task: Level: (2) ID = <10329> Status = 0 0 0 0 ok 2008-Jan-14 02:52:23 LOG1 fixed_driftmap: New position: year = 2008.0386576609121 RA = 09:57:23.2 RA/Dec = 09:57:52.6 +25:59:45.5 2008-Jan-14 02:52:23 NOTE fixed_driftmap: Correcting ZA to 7:38:31.8 ... 2008-Jan-14 02:52:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6421648115 -CF 2008-Jan-14 02:52:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 02:52:23 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 02:52:23 LOG5 begin_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Jan-14 02:52:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 02:52:23 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 02:52:23 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 02:52:23 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Jan-14 02:52:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 02:52:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 02:52:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:52:23 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 02:52:23 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Jan-14 02:52:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6421648115 -CF 2008-Jan-14 02:52:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:52:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 02:52:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 02:52:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:52:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 02:52:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 02:52:24 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 02:52:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:52:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 02:52:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:52:24 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 02:52:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:52:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:52:24 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:52:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 02:52:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 02:52:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:52:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 02:52:24 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 02:52:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 02:52:24 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 02:52:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 02:52:24 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 02:52:24 LOG5 finish_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 02:52:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:52:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 02:52:24 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 02:52:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 02:52:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 02:52:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:52:24 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:52:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 02:52:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:52:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:52:24 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 02:52:24 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 02:52:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:52:24 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Jan-14 02:52:24 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 02:52:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:52:24 INFO2 take_spectra: Starting WAPP scan: 801400055 2008-Jan-14 02:52:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 02:52:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:52:25 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Jan-14 02:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:52:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24746.00 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 02:52:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 02:52:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 02:52:27 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 02:52:27 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 02:52:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 02:52:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 02:52:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 02:52:27 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 02:52:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 02:52:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 02:52:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 02:52:27 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 02:52:27 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 02:52:27 LOG5 finish_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 02:52:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 02:52:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 02:52:27 LOG5 end_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2008-Jan-14 02:52:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Jan-14 02:52:27 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Jan-14 02:52:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 02:52:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 02:52:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 02:52:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 02:52:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 02:52:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 02:52:28 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 02:52:28 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 02:52:28 LOG5 begin_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2008-Jan-14 02:52:28 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 02:52:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 02:52:28 INFO2 take_spectra: Starting WAPP scan: 801400056 2008-Jan-14 02:52:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 02:52:28 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 02:52:28 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Jan-14 02:52:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 02:52:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 02:52:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0016.fits 2008-Jan-14 02:52:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0016.fits} 2008-Jan-14 02:52:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24749.00 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 02:52:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:02:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:02:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:02:29 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2008-Jan-14 03:02:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:02:29 LOG5 end_task: Level: (2) ID = <10340> Status = 0 0 0 0 ok 2008-Jan-14 03:02:29 LOG1 fixed_driftmap: New position: year = 2008.0386768638934 RA = 10:07:31.1 RA/Dec = 10:08:00.3 +25:59:41.3 2008-Jan-14 03:02:29 NOTE fixed_driftmap: Correcting ZA to 7:38:27.6 ... 2008-Jan-14 03:02:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6410049900 -CF 2008-Jan-14 03:02:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:02:29 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:02:29 LOG5 begin_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Jan-14 03:02:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:02:29 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:02:29 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:02:29 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Jan-14 03:02:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:02:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:02:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:02:29 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:02:29 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Jan-14 03:02:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6410049900 -CF 2008-Jan-14 03:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:02:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:02:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:02:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 03:02:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:02:30 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:02:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:02:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:02:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:02:30 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:02:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:02:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:02:30 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:02:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:02:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:02:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:02:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:02:30 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:02:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:02:30 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:02:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:02:30 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:02:30 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:02:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:02:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:02:30 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:02:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:02:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:02:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:02:30 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:02:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:02:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:02:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:02:30 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:02:30 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:02:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:02:30 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Jan-14 03:02:30 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:02:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:02:30 INFO2 take_spectra: Starting WAPP scan: 801400057 2008-Jan-14 03:02:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:02:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:02:31 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Jan-14 03:02:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:02:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25352.00 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:02:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:02:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:02:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:02:33 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:02:33 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:02:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:02:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:02:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:02:33 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:02:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:02:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:02:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:02:33 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:02:33 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:02:33 LOG5 finish_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:02:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:02:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:02:33 LOG5 end_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2008-Jan-14 03:02:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Jan-14 03:02:33 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Jan-14 03:02:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:02:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:02:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:02:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:02:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:02:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:02:34 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:02:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:02:34 LOG5 begin_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2008-Jan-14 03:02:34 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:02:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:02:34 INFO2 take_spectra: Starting WAPP scan: 801400058 2008-Jan-14 03:02:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:02:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:02:34 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Jan-14 03:02:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:02:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:02:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0017.fits 2008-Jan-14 03:02:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0017.fits} 2008-Jan-14 03:02:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25355.00 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:12:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:12:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:12:35 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2008-Jan-14 03:12:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:12:35 LOG5 end_task: Level: (2) ID = <10351> Status = 0 0 0 0 ok 2008-Jan-14 03:12:35 LOG1 fixed_driftmap: New position: year = 2008.0386960668745 RA = 10:17:39.0 RA/Dec = 10:18:07.9 +25:59:37.4 2008-Jan-14 03:12:35 NOTE fixed_driftmap: Correcting ZA to 7:38:23.7 ... 2008-Jan-14 03:12:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6399252159 -CF 2008-Jan-14 03:12:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:12:35 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:12:35 LOG5 begin_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Jan-14 03:12:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:12:35 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:12:35 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:12:35 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Jan-14 03:12:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:12:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:12:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:12:35 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:12:35 LOG5 begin_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6399252159 -CF 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:12:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 03:12:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:12:35 LOG5 end_task: Level: (4) ID = <10355> Status = 0 0 0 0 ok 2008-Jan-14 03:12:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:12:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:12:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:12:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:12:36 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Jan-14 03:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:12:37 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:12:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:12:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:12:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:12:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:12:37 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:12:37 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:12:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:12:37 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:12:37 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:12:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:12:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:12:37 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:12:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:12:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:12:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:12:37 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:12:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:12:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:12:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:12:37 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:12:37 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:12:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:12:37 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:12:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:12:37 INFO2 take_spectra: Starting WAPP scan: 801400059 2008-Jan-14 03:12:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:12:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:12:37 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Jan-14 03:12:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:12:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25958.00 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:12:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:12:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:12:39 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Jan-14 03:12:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:12:39 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Jan-14 03:12:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:12:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:12:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:12:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:12:39 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:12:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:12:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:12:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:12:40 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:12:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:12:40 LOG5 finish_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:12:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:12:40 LOG5 end_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Jan-14 03:12:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:12:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:12:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:12:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:12:40 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:12:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:12:40 LOG5 begin_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:12:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:12:40 INFO2 take_spectra: Starting WAPP scan: 801400060 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:12:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:12:40 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Jan-14 03:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:12:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0018.fits 2008-Jan-14 03:12:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0018.fits} 2008-Jan-14 03:12:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25961.00 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:22:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:22:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:22:41 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2008-Jan-14 03:22:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:22:41 LOG5 end_task: Level: (2) ID = <10362> Status = 0 0 0 0 ok 2008-Jan-14 03:22:41 LOG1 fixed_driftmap: New position: year = 2008.0387152698559 RA = 10:27:46.9 RA/Dec = 10:28:15.6 +25:59:33.8 2008-Jan-14 03:22:41 NOTE fixed_driftmap: Correcting ZA to 7:38:20.1 ... 2008-Jan-14 03:22:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6389276050 -CF 2008-Jan-14 03:22:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:22:41 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:22:41 LOG5 begin_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Jan-14 03:22:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:22:41 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:22:41 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:22:41 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Jan-14 03:22:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:22:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:22:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:22:41 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:22:41 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Jan-14 03:22:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6389276050 -CF 2008-Jan-14 03:22:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:22:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:22:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:22:42 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 03:22:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:22:42 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:22:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:22:42 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:22:42 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:22:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:22:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:22:42 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:22:42 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:22:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:22:42 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:22:42 LOG5 finish_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:22:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:22:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:22:42 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:22:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:22:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:22:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:22:42 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:22:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:22:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:22:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:22:42 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:22:42 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:22:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:22:42 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Jan-14 03:22:42 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:22:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:22:42 INFO2 take_spectra: Starting WAPP scan: 801400061 2008-Jan-14 03:22:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:22:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:22:43 LOG5 begin_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Jan-14 03:22:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:22:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26564.00 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:22:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:22:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:22:45 LOG5 end_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:22:45 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:22:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:22:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:22:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:22:45 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:22:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:22:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:22:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:22:45 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:22:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:22:45 LOG5 finish_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:22:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:22:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:22:45 LOG5 end_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2008-Jan-14 03:22:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Jan-14 03:22:45 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Jan-14 03:22:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:22:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:22:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:22:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:22:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:22:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:22:46 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:22:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:22:46 LOG5 begin_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Jan-14 03:22:46 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:22:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:22:46 INFO2 take_spectra: Starting WAPP scan: 801400062 2008-Jan-14 03:22:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:22:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:22:46 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Jan-14 03:22:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:22:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:22:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0019.fits 2008-Jan-14 03:22:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0019.fits} 2008-Jan-14 03:22:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26567.00 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:32:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:32:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:32:47 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Jan-14 03:32:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:32:47 LOG5 end_task: Level: (2) ID = <10373> Status = 0 0 0 0 ok 2008-Jan-14 03:32:47 LOG1 fixed_driftmap: New position: year = 2008.0387344728369 RA = 10:37:54.8 RA/Dec = 10:38:23.3 +25:59:30.6 2008-Jan-14 03:32:47 NOTE fixed_driftmap: Correcting ZA to 7:38:16.9 ... 2008-Jan-14 03:32:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6380141109 -CF 2008-Jan-14 03:32:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:32:47 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:32:47 LOG5 begin_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Jan-14 03:32:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:32:47 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:32:47 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:32:47 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Jan-14 03:32:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:32:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:32:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:32:47 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:32:47 LOG5 begin_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Jan-14 03:32:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6380141109 -CF 2008-Jan-14 03:32:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:32:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:32:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:32:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:32:48 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 03:32:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:32:48 LOG5 end_task: Level: (4) ID = <10377> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:32:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:32:48 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:32:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:32:48 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:32:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:32:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:32:48 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:32:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:32:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:32:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:32:48 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:32:48 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:32:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:32:48 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:32:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:32:48 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:32:48 LOG5 finish_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:32:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:32:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:32:48 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:32:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:32:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:32:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:32:48 LOG5 begin_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:32:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:32:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:32:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:32:48 LOG5 end_task: Level: (3) ID = <10380> Status = 0 0 0 0 ok 2008-Jan-14 03:32:48 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:32:48 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:32:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:32:48 LOG5 begin_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2008-Jan-14 03:32:49 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:32:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:32:49 INFO2 take_spectra: Starting WAPP scan: 801400063 2008-Jan-14 03:32:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:32:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:32:49 LOG5 begin_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Jan-14 03:32:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:32:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27170.00 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:32:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:32:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:32:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:32:51 LOG5 end_task: Level: (4) ID = <10382> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:32:51 LOG5 end_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:32:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:32:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:32:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:32:51 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:32:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:32:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:32:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:32:51 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:32:51 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:32:51 LOG5 finish_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:32:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:32:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:32:51 LOG5 end_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2008-Jan-14 03:32:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Jan-14 03:32:51 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Jan-14 03:32:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:32:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:32:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:32:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:32:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:32:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:32:52 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:32:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:32:52 LOG5 begin_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2008-Jan-14 03:32:52 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:32:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:32:52 INFO2 take_spectra: Starting WAPP scan: 801400064 2008-Jan-14 03:32:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:32:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:32:52 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Jan-14 03:32:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:32:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:32:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0020.fits 2008-Jan-14 03:32:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0020.fits} 2008-Jan-14 03:32:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27173.00 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:32:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:42:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:42:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:42:53 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2008-Jan-14 03:42:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:42:53 LOG5 end_task: Level: (2) ID = <10384> Status = 0 0 0 0 ok 2008-Jan-14 03:42:53 LOG1 fixed_driftmap: New position: year = 2008.0387536758183 RA = 10:48:02.8 RA/Dec = 10:48:30.9 +25:59:27.6 2008-Jan-14 03:42:53 NOTE fixed_driftmap: Correcting ZA to 7:38:13.9 ... 2008-Jan-14 03:42:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6371865069 -CF 2008-Jan-14 03:42:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:42:53 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:42:53 LOG5 begin_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Jan-14 03:42:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:42:53 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:42:53 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:42:53 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Jan-14 03:42:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:42:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:42:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:42:53 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:42:53 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Jan-14 03:42:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6371865069 -CF 2008-Jan-14 03:42:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:42:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:42:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:42:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:42:54 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 03:42:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:42:54 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2008-Jan-14 03:42:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:42:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:42:54 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:42:54 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:42:54 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Jan-14 03:42:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:42:54 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:42:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:42:54 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:42:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:42:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:42:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:42:55 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:42:55 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:42:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:42:55 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:42:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:42:55 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:42:55 LOG5 finish_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:42:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:42:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:42:55 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:42:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:42:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:42:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:42:55 LOG5 begin_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:42:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:42:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:42:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:42:55 LOG5 end_task: Level: (3) ID = <10391> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:42:55 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:42:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:42:55 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:42:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:42:55 INFO2 take_spectra: Starting WAPP scan: 801400065 2008-Jan-14 03:42:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:42:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:42:55 LOG5 begin_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Jan-14 03:42:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:42:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27776.00 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:42:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:42:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:42:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:42:57 LOG5 end_task: Level: (4) ID = <10393> Status = 0 0 0 0 ok 2008-Jan-14 03:42:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:42:57 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2008-Jan-14 03:42:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:42:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:42:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:42:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:42:57 LOG5 begin_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:42:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:42:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:42:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:42:58 LOG5 end_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:42:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:42:58 LOG5 finish_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:42:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:42:58 LOG5 end_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Jan-14 03:42:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:42:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:42:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:42:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:42:58 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:42:58 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:42:58 LOG5 begin_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:42:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:42:58 INFO2 take_spectra: Starting WAPP scan: 801400066 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:42:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:42:58 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Jan-14 03:42:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:42:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:42:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0021.fits 2008-Jan-14 03:42:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27779.00 2008-Jan-14 03:42:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0021.fits} 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:43:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:52:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:52:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:52:59 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2008-Jan-14 03:52:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:52:59 LOG5 end_task: Level: (2) ID = <10395> Status = 0 0 0 0 ok 2008-Jan-14 03:52:59 LOG1 fixed_driftmap: New position: year = 2008.0387728787994 RA = 10:58:10.7 RA/Dec = 10:58:38.6 +25:59:24.9 2008-Jan-14 03:52:59 NOTE fixed_driftmap: Correcting ZA to 7:38:11.2 ... 2008-Jan-14 03:52:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6364464237 -CF 2008-Jan-14 03:52:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 03:52:59 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 03:52:59 LOG5 begin_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Jan-14 03:52:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 03:52:59 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 03:52:59 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 03:52:59 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Jan-14 03:52:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 03:52:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 03:52:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:52:59 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 03:52:59 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Jan-14 03:52:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6364464237 -CF 2008-Jan-14 03:52:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:52:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 03:52:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 03:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:53:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 03:53:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 03:53:00 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2008-Jan-14 03:53:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 03:53:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:53:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 03:53:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:53:00 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Jan-14 03:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 03:53:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:53:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:53:01 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:53:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 03:53:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 03:53:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:53:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 03:53:01 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 03:53:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 03:53:01 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 03:53:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 03:53:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 03:53:01 LOG5 finish_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 03:53:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:53:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 03:53:01 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 03:53:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 03:53:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 03:53:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:53:01 LOG5 begin_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:53:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 03:53:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:53:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:53:01 LOG5 end_task: Level: (3) ID = <10402> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 03:53:01 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 03:53:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:53:01 LOG5 begin_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2008-Jan-14 03:53:01 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 03:53:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:53:01 INFO2 take_spectra: Starting WAPP scan: 801400067 2008-Jan-14 03:53:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 03:53:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:53:02 LOG5 begin_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Jan-14 03:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:53:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28383.00 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 03:53:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 03:53:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 03:53:04 LOG5 end_task: Level: (4) ID = <10404> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 03:53:04 LOG5 end_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 03:53:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 03:53:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 03:53:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 03:53:04 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 03:53:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 03:53:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 03:53:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 03:53:04 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 03:53:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 03:53:04 LOG5 finish_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 03:53:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 03:53:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 03:53:04 LOG5 end_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2008-Jan-14 03:53:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Jan-14 03:53:04 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Jan-14 03:53:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 03:53:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 03:53:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 03:53:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 03:53:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 03:53:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 03:53:05 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 03:53:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 03:53:05 LOG5 begin_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2008-Jan-14 03:53:05 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 03:53:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 03:53:05 INFO2 take_spectra: Starting WAPP scan: 801400068 2008-Jan-14 03:53:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 03:53:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 03:53:05 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Jan-14 03:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 03:53:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 03:53:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0022.fits 2008-Jan-14 03:53:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28386.00 2008-Jan-14 03:53:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0022.fits} 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 03:53:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:03:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:03:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:03:06 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2008-Jan-14 04:03:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:03:06 LOG5 end_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2008-Jan-14 04:03:06 LOG1 fixed_driftmap: New position: year = 2008.0387921134688 RA = 11:08:19.6 RA/Dec = 11:08:47.2 +25:59:22.6 2008-Jan-14 04:03:06 NOTE fixed_driftmap: Correcting ZA to 7:38:08.9 ... 2008-Jan-14 04:03:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6357942956 -CF 2008-Jan-14 04:03:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:03:06 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:03:06 LOG5 begin_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Jan-14 04:03:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:03:06 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:03:06 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:03:06 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Jan-14 04:03:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:03:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:03:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:03:06 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:03:06 LOG5 begin_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Jan-14 04:03:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6357942956 -CF 2008-Jan-14 04:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:03:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:03:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:03:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:03:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:03:07 LOG5 end_task: Level: (4) ID = <10410> Status = 0 0 0 0 ok 2008-Jan-14 04:03:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:03:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:03:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:03:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:03:07 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Jan-14 04:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:03:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:03:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:03:07 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2008-Jan-14 04:03:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:03:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:03:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:03:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:03:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:03:07 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2008-Jan-14 04:03:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:03:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:03:07 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:03:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:03:08 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:03:08 LOG5 finish_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:03:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:03:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:03:08 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:03:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:03:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:03:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:03:08 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:03:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:03:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:03:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:03:08 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:03:08 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:03:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:03:08 LOG5 begin_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:03:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:03:08 INFO2 take_spectra: Starting WAPP scan: 801400069 2008-Jan-14 04:03:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:03:08 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:03:08 LOG5 begin_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2008-Jan-14 04:03:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:03:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28989.00 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:03:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:03:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:03:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:03:10 LOG5 end_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2008-Jan-14 04:03:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:03:10 LOG5 end_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2008-Jan-14 04:03:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:03:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:03:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:03:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:03:10 LOG5 begin_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Jan-14 04:03:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:03:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:03:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:03:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:03:10 LOG5 end_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2008-Jan-14 04:03:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:03:10 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:03:10 LOG5 finish_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Jan-14 04:03:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:03:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:03:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:03:11 LOG5 end_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2008-Jan-14 04:03:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Jan-14 04:03:11 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Jan-14 04:03:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:03:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:03:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:03:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:03:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:03:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:03:11 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:03:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:03:11 LOG5 begin_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2008-Jan-14 04:03:11 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:03:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:03:11 INFO2 take_spectra: Starting WAPP scan: 801400070 2008-Jan-14 04:03:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:03:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:03:11 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Jan-14 04:03:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:03:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:03:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0023.fits 2008-Jan-14 04:03:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0023.fits} 2008-Jan-14 04:03:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28992.00 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:03:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:13:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:13:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:13:12 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2008-Jan-14 04:13:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:13:12 LOG5 end_task: Level: (2) ID = <10417> Status = 0 0 0 0 ok 2008-Jan-14 04:13:12 LOG1 fixed_driftmap: New position: year = 2008.0388113164499 RA = 11:18:27.6 RA/Dec = 11:18:54.9 +25:59:20.5 2008-Jan-14 04:13:12 NOTE fixed_driftmap: Correcting ZA to 7:38:06.8 ... 2008-Jan-14 04:13:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6352335480 -CF 2008-Jan-14 04:13:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:13:12 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:13:12 LOG5 begin_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Jan-14 04:13:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:13:12 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:13:12 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:13:12 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Jan-14 04:13:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:13:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:13:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:13:12 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:13:12 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Jan-14 04:13:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6352335480 -CF 2008-Jan-14 04:13:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:13:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:13:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:13:13 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:13:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:13:13 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2008-Jan-14 04:13:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:13:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:13:13 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:13:13 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:13:13 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Jan-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:13:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:13:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:13:14 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:13:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:13:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:13:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:13:14 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:13:14 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:13:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:13:14 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:13:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:13:14 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:13:14 LOG5 finish_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:13:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:13:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:13:14 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:13:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:13:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:13:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:13:14 LOG5 begin_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:13:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:13:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:13:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:13:14 LOG5 end_task: Level: (3) ID = <10424> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:13:14 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:13:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:13:14 LOG5 begin_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Jan-14 04:13:14 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:13:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:13:14 INFO2 take_spectra: Starting WAPP scan: 801400071 2008-Jan-14 04:13:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:13:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:13:15 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Jan-14 04:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:13:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29596.00 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:13:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:13:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:13:17 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:13:17 LOG5 end_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:13:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:13:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:13:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:13:17 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:13:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:13:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:13:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:13:17 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:13:17 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:13:17 LOG5 finish_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:13:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:13:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:13:17 LOG5 end_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2008-Jan-14 04:13:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2008-Jan-14 04:13:17 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2008-Jan-14 04:13:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:13:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:13:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:13:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:13:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:13:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:13:18 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:13:18 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:13:18 LOG5 begin_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2008-Jan-14 04:13:18 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:13:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:13:18 INFO2 take_spectra: Starting WAPP scan: 801400072 2008-Jan-14 04:13:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:13:18 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:13:18 LOG5 begin_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2008-Jan-14 04:13:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:13:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:13:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0024.fits 2008-Jan-14 04:13:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0024.fits} 2008-Jan-14 04:13:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29599.00 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:13:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:23:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:23:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:23:19 LOG5 end_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2008-Jan-14 04:23:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:23:19 LOG5 end_task: Level: (2) ID = <10428> Status = 0 0 0 0 ok 2008-Jan-14 04:23:19 LOG1 fixed_driftmap: New position: year = 2008.0388305511192 RA = 11:28:36.5 RA/Dec = 11:29:03.6 +25:59:18.8 2008-Jan-14 04:23:19 NOTE fixed_driftmap: Correcting ZA to 7:38:05.1 ... 2008-Jan-14 04:23:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6347634332 -CF 2008-Jan-14 04:23:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:23:19 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:23:19 LOG5 begin_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Jan-14 04:23:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:23:19 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:23:19 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:23:19 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Jan-14 04:23:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:23:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:23:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:23:19 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:23:19 LOG5 begin_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6347634332 -CF 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:23:19 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:23:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:23:19 LOG5 end_task: Level: (4) ID = <10432> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:23:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:23:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:23:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:23:20 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:23:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:23:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:23:20 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:23:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:23:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:23:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:23:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:23:20 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:23:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:23:20 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:23:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:23:20 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:23:20 LOG5 finish_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:23:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:23:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:23:20 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:23:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:23:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:23:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:23:20 LOG5 begin_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:23:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:23:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:23:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:23:20 LOG5 end_task: Level: (3) ID = <10435> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:23:20 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:23:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:23:20 LOG5 begin_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2008-Jan-14 04:23:20 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:23:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:23:20 INFO2 take_spectra: Starting WAPP scan: 801400073 2008-Jan-14 04:23:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:23:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:23:21 LOG5 begin_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Jan-14 04:23:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:23:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30202.00 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:23:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:23:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:23:23 LOG5 end_task: Level: (4) ID = <10437> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:23:23 LOG5 end_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:23:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:23:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:23:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:23:23 LOG5 begin_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:23:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:23:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:23:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:23:23 LOG5 end_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:23:23 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:23:23 LOG5 finish_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:23:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:23:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:23:23 LOG5 end_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2008-Jan-14 04:23:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2008-Jan-14 04:23:23 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2008-Jan-14 04:23:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:23:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:23:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:23:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:23:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:23:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:23:24 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:23:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:23:24 LOG5 begin_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2008-Jan-14 04:23:24 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:23:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:23:24 INFO2 take_spectra: Starting WAPP scan: 801400074 2008-Jan-14 04:23:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:23:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:23:24 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Jan-14 04:23:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:23:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:23:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0025.fits 2008-Jan-14 04:23:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0025.fits} 2008-Jan-14 04:23:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30205.00 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:23:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:33:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:33:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:33:25 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2008-Jan-14 04:33:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:33:25 LOG5 end_task: Level: (2) ID = <10439> Status = 0 0 0 0 ok 2008-Jan-14 04:33:25 LOG1 fixed_driftmap: New position: year = 2008.0388497541005 RA = 11:38:44.5 RA/Dec = 11:39:11.2 +25:59:17.5 2008-Jan-14 04:33:25 NOTE fixed_driftmap: Correcting ZA to 7:38:03.8 ... 2008-Jan-14 04:33:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6343864161 -CF 2008-Jan-14 04:33:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:33:25 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:33:25 LOG5 begin_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Jan-14 04:33:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:33:25 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:33:25 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:33:25 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Jan-14 04:33:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:33:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:33:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:33:25 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:33:25 LOG5 begin_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6343864161 -CF 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:33:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:33:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:33:25 LOG5 end_task: Level: (4) ID = <10443> Status = 0 0 0 0 ok 2008-Jan-14 04:33:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:33:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:33:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:33:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:33:26 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Jan-14 04:33:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:33:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:33:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:33:27 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:33:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:33:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:33:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:33:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:33:27 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:33:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:33:27 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:33:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:33:27 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:33:27 LOG5 finish_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:33:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:33:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:33:27 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:33:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:33:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:33:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:33:27 LOG5 begin_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:33:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:33:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:33:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:33:27 LOG5 end_task: Level: (3) ID = <10446> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:33:27 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:33:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:33:27 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:33:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:33:27 INFO2 take_spectra: Starting WAPP scan: 801400075 2008-Jan-14 04:33:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:33:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:33:27 LOG5 begin_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Jan-14 04:33:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:33:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30808.00 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:33:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:33:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:33:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:33:29 LOG5 end_task: Level: (4) ID = <10448> Status = 0 0 0 0 ok 2008-Jan-14 04:33:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:33:29 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2008-Jan-14 04:33:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:33:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:33:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:33:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:33:29 LOG5 begin_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:33:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:33:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:33:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:33:30 LOG5 end_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:33:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:33:30 LOG5 finish_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:33:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:33:30 LOG5 end_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2008-Jan-14 04:33:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:33:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:33:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:33:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:33:30 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:33:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:33:30 LOG5 begin_task: Level: (2) ID = <10450> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:33:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:33:30 INFO2 take_spectra: Starting WAPP scan: 801400076 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:33:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:33:30 LOG5 begin_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2008-Jan-14 04:33:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:33:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:33:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0026.fits 2008-Jan-14 04:33:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0026.fits} 2008-Jan-14 04:33:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30811.00 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:33:32 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:43:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:43:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:43:31 LOG5 end_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2008-Jan-14 04:43:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:43:31 LOG5 end_task: Level: (2) ID = <10450> Status = 0 0 0 0 ok 2008-Jan-14 04:43:31 LOG1 fixed_driftmap: New position: year = 2008.0388689570816 RA = 11:48:52.4 RA/Dec = 11:49:18.9 +25:59:16.5 2008-Jan-14 04:43:31 NOTE fixed_driftmap: Correcting ZA to 7:38:02.8 ... 2008-Jan-14 04:43:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6341023804 -CF 2008-Jan-14 04:43:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:43:31 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:43:31 LOG5 begin_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Jan-14 04:43:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:43:31 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:43:31 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:43:31 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Jan-14 04:43:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:43:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:43:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:43:31 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:43:31 LOG5 begin_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Jan-14 04:43:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6341023804 -CF 2008-Jan-14 04:43:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:43:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:43:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:43:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:43:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:43:32 LOG5 end_task: Level: (4) ID = <10454> Status = 0 0 0 0 ok 2008-Jan-14 04:43:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:43:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:43:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:43:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:43:32 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Jan-14 04:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:43:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:43:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:43:33 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:43:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:43:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:43:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:43:33 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:43:33 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:43:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:43:33 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:43:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:43:33 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:43:33 LOG5 finish_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:43:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:43:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:43:33 LOG5 end_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:43:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:43:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:43:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:43:33 LOG5 begin_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:43:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:43:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:43:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:43:33 LOG5 end_task: Level: (3) ID = <10457> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:43:33 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:43:33 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:43:33 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Jan-14 04:43:33 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:43:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:43:33 INFO2 take_spectra: Starting WAPP scan: 801400077 2008-Jan-14 04:43:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:43:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:43:34 LOG5 begin_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Jan-14 04:43:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:43:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31415.00 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:43:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:43:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:43:36 LOG5 end_task: Level: (4) ID = <10459> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:43:36 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:43:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:43:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:43:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:43:36 LOG5 begin_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:43:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:43:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:43:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:43:36 LOG5 end_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:43:36 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:43:36 LOG5 finish_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:43:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:43:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:43:36 LOG5 end_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2008-Jan-14 04:43:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2008-Jan-14 04:43:36 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2008-Jan-14 04:43:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:43:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:43:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:43:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:43:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:43:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:43:37 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:43:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:43:37 LOG5 begin_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2008-Jan-14 04:43:37 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:43:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:43:37 INFO2 take_spectra: Starting WAPP scan: 801400078 2008-Jan-14 04:43:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:43:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:43:37 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Jan-14 04:43:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:43:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:43:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0027.fits 2008-Jan-14 04:43:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0027.fits} 2008-Jan-14 04:43:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31418.00 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:53:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:53:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:53:38 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2008-Jan-14 04:53:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:53:38 LOG5 end_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2008-Jan-14 04:53:38 LOG1 fixed_driftmap: New position: year = 2008.0388881917511 RA = 11:59:01.4 RA/Dec = 11:59:27.5 +25:59:15.8 2008-Jan-14 04:53:38 NOTE fixed_driftmap: Correcting ZA to 7:38:02.1 ... 2008-Jan-14 04:53:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6339116480 -CF 2008-Jan-14 04:53:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 04:53:38 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 04:53:38 LOG5 begin_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Jan-14 04:53:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 04:53:38 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 04:53:38 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 04:53:38 LOG5 begin_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Jan-14 04:53:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 04:53:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 04:53:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:53:38 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 04:53:38 LOG5 begin_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Jan-14 04:53:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6339116480 -CF 2008-Jan-14 04:53:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:53:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 04:53:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 04:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:53:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 04:53:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 04:53:39 LOG5 end_task: Level: (4) ID = <10465> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 04:53:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:53:39 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 04:53:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:53:39 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 04:53:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:53:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:53:39 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:53:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 04:53:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 04:53:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:53:39 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 04:53:39 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 04:53:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 04:53:39 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 04:53:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 04:53:39 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 04:53:39 LOG5 finish_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 04:53:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:53:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 04:53:39 LOG5 end_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2008-Jan-14 04:53:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 04:53:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 04:53:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 04:53:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:53:39 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Jan-14 04:53:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:53:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 04:53:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:53:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:53:40 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2008-Jan-14 04:53:40 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 04:53:40 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 04:53:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:53:40 LOG5 begin_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Jan-14 04:53:40 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 04:53:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:53:40 INFO2 take_spectra: Starting WAPP scan: 801400079 2008-Jan-14 04:53:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 04:53:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:53:40 LOG5 begin_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Jan-14 04:53:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:53:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32021.00 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:53:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 04:53:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 04:53:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 04:53:42 LOG5 end_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 04:53:42 LOG5 end_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 04:53:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 04:53:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 04:53:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 04:53:42 LOG5 begin_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 04:53:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 04:53:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 04:53:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 04:53:42 LOG5 end_task: Level: (3) ID = <10471> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 04:53:42 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 04:53:42 LOG5 finish_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 04:53:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 04:53:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 04:53:42 LOG5 end_task: Level: (2) ID = <10463> Status = 0 0 0 0 ok 2008-Jan-14 04:53:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2008-Jan-14 04:53:42 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2008-Jan-14 04:53:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 04:53:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 04:53:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 04:53:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 04:53:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 04:53:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 04:53:43 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 04:53:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 04:53:43 LOG5 begin_task: Level: (2) ID = <10472> Status = 0 0 0 0 ok 2008-Jan-14 04:53:43 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 04:53:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 04:53:43 INFO2 take_spectra: Starting WAPP scan: 801400080 2008-Jan-14 04:53:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 04:53:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 04:53:43 LOG5 begin_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2008-Jan-14 04:53:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 04:53:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 04:53:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0028.fits 2008-Jan-14 04:53:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0028.fits} 2008-Jan-14 04:53:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32024.00 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 04:53:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:03:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:03:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:03:44 LOG5 end_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:03:44 LOG5 end_task: Level: (2) ID = <10472> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 LOG1 fixed_driftmap: New position: year = 2008.0389073947322 RA = 12:09:09.3 RA/Dec = 12:09:35.2 +25:59:15.4 2008-Jan-14 05:03:44 NOTE fixed_driftmap: Correcting ZA to 7:38:01.7 ... 2008-Jan-14 05:03:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6338152170 -CF 2008-Jan-14 05:03:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:03:44 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:03:44 LOG5 begin_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:03:44 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:03:44 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:03:44 LOG5 begin_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:03:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:03:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:03:44 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:03:44 LOG5 begin_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6338152170 -CF 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:03:44 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:03:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:03:44 LOG5 end_task: Level: (4) ID = <10476> Status = 0 0 0 0 ok 2008-Jan-14 05:03:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:03:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:03:45 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:03:45 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:03:45 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Jan-14 05:03:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:03:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:03:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:03:46 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:03:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:03:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:03:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:03:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:03:46 LOG5 begin_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:03:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:03:46 LOG5 end_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:03:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:03:46 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:03:46 LOG5 finish_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:03:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:03:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:03:46 LOG5 end_task: Level: (3) ID = <10475> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:03:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:03:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:03:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:03:46 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:03:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:03:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:03:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:03:46 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:03:46 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:03:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:03:46 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:03:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:03:46 INFO2 take_spectra: Starting WAPP scan: 801400081 2008-Jan-14 05:03:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:03:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:03:46 LOG5 begin_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Jan-14 05:03:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:03:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32627.00 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:03:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:03:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:03:48 LOG5 end_task: Level: (4) ID = <10481> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:03:48 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:03:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:03:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:03:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:03:48 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:03:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:03:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:03:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:03:48 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:03:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:03:48 LOG5 finish_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:03:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:03:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:03:48 LOG5 end_task: Level: (2) ID = <10474> Status = 0 0 0 0 ok 2008-Jan-14 05:03:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2008-Jan-14 05:03:48 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2008-Jan-14 05:03:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:03:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:03:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:03:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:03:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:03:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:03:49 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:03:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:03:49 LOG5 begin_task: Level: (2) ID = <10483> Status = 0 0 0 0 ok 2008-Jan-14 05:03:49 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:03:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:03:49 INFO2 take_spectra: Starting WAPP scan: 801400082 2008-Jan-14 05:03:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:03:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:03:49 LOG5 begin_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Jan-14 05:03:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:03:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:03:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0029.fits 2008-Jan-14 05:03:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0029.fits} 2008-Jan-14 05:03:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32630.00 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:03:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:13:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:13:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:13:50 LOG5 end_task: Level: (3) ID = <10484> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:13:50 LOG5 end_task: Level: (2) ID = <10483> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 LOG1 fixed_driftmap: New position: year = 2008.0389265977135 RA = 12:19:17.3 RA/Dec = 12:19:42.9 +25:59:15.4 2008-Jan-14 05:13:50 NOTE fixed_driftmap: Correcting ZA to 7:38:01.7 ... 2008-Jan-14 05:13:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6338128844 -CF 2008-Jan-14 05:13:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:13:50 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:13:50 LOG5 begin_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:13:50 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:13:50 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:13:50 LOG5 begin_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:13:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:13:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:13:50 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:13:50 LOG5 begin_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6338128844 -CF 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:13:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:13:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:13:50 LOG5 end_task: Level: (4) ID = <10487> Status = 0 0 0 0 ok 2008-Jan-14 05:13:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:13:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:13:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:13:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:13:50 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:13:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:13:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:13:51 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:13:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:13:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:13:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:13:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:13:51 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:13:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:13:51 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:13:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:13:51 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:13:51 LOG5 finish_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:13:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:13:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:13:51 LOG5 end_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:13:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:13:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:13:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:13:51 LOG5 begin_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:13:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:13:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:13:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:13:51 LOG5 end_task: Level: (3) ID = <10490> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:13:51 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:13:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:13:51 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:13:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:13:51 INFO2 take_spectra: Starting WAPP scan: 801400083 2008-Jan-14 05:13:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:13:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:13:51 LOG5 begin_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Jan-14 05:13:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:13:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33232.00 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:13:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:13:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:13:53 LOG5 end_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:13:53 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:13:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:13:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:13:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:13:53 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:13:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:13:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:13:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:13:53 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:13:53 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:13:53 LOG5 finish_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:13:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:13:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:13:53 LOG5 end_task: Level: (2) ID = <10485> Status = 0 0 0 0 ok 2008-Jan-14 05:13:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2008-Jan-14 05:13:53 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2008-Jan-14 05:13:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:13:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:13:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:13:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:13:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:13:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:13:54 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:13:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:13:54 LOG5 begin_task: Level: (2) ID = <10494> Status = 0 0 0 0 ok 2008-Jan-14 05:13:54 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:13:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:13:54 INFO2 take_spectra: Starting WAPP scan: 801400084 2008-Jan-14 05:13:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:13:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:13:54 LOG5 begin_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2008-Jan-14 05:13:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:13:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:13:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0030.fits 2008-Jan-14 05:13:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0030.fits} 2008-Jan-14 05:13:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33235.00 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:13:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:23:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:23:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:23:55 LOG5 end_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2008-Jan-14 05:23:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:23:55 LOG5 end_task: Level: (2) ID = <10494> Status = 0 0 0 0 ok 2008-Jan-14 05:23:55 LOG1 fixed_driftmap: New position: year = 2008.0389457690067 RA = 12:29:24.3 RA/Dec = 12:29:49.5 +25:59:15.8 2008-Jan-14 05:23:55 NOTE fixed_driftmap: Correcting ZA to 7:38:02.1 ... 2008-Jan-14 05:23:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6339044256 -CF 2008-Jan-14 05:23:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:23:55 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:23:55 LOG5 begin_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Jan-14 05:23:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:23:55 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:23:55 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:23:55 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Jan-14 05:23:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:23:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:23:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:23:55 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:23:55 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6339044256 -CF 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:23:55 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:23:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:23:55 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:23:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:23:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:23:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:23:56 LOG5 begin_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:23:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:23:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:23:56 LOG5 end_task: Level: (4) ID = <10499> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:23:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:23:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:23:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:23:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:23:56 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:23:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:23:56 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:23:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:23:56 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:23:56 LOG5 finish_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:23:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:23:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:23:56 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:23:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:23:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:23:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:23:56 LOG5 begin_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:23:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:23:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:23:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:23:56 LOG5 end_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:23:56 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:23:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:23:56 LOG5 begin_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:23:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:23:56 INFO2 take_spectra: Starting WAPP scan: 801400085 2008-Jan-14 05:23:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:23:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:23:56 LOG5 begin_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Jan-14 05:23:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:23:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33837.00 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:23:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:23:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:23:58 LOG5 end_task: Level: (4) ID = <10503> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:23:58 LOG5 end_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:23:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:23:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:23:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:23:58 LOG5 begin_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:23:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:23:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:23:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:23:58 LOG5 end_task: Level: (3) ID = <10504> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:23:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:23:58 LOG5 finish_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:23:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:23:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:23:58 LOG5 end_task: Level: (2) ID = <10496> Status = 0 0 0 0 ok 2008-Jan-14 05:23:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2008-Jan-14 05:23:58 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2008-Jan-14 05:23:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:23:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:23:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:23:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:23:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:23:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:23:59 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:23:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:23:59 LOG5 begin_task: Level: (2) ID = <10505> Status = 0 0 0 0 ok 2008-Jan-14 05:23:59 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:23:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:23:59 INFO2 take_spectra: Starting WAPP scan: 801400086 2008-Jan-14 05:23:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:23:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:23:59 LOG5 begin_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Jan-14 05:23:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:23:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:23:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0031.fits 2008-Jan-14 05:23:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0031.fits} 2008-Jan-14 05:23:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33840.00 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:34:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:34:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:34:00 LOG5 end_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2008-Jan-14 05:34:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:34:00 LOG5 end_task: Level: (2) ID = <10505> Status = 0 0 0 0 ok 2008-Jan-14 05:34:00 LOG1 fixed_driftmap: New position: year = 2008.0389649402996 RA = 12:39:31.2 RA/Dec = 12:39:56.2 +25:59:16.4 2008-Jan-14 05:34:00 NOTE fixed_driftmap: Correcting ZA to 7:38:02.7 ... 2008-Jan-14 05:34:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6340895804 -CF 2008-Jan-14 05:34:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:34:00 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:34:00 LOG5 begin_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Jan-14 05:34:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:34:00 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:34:00 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:34:00 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Jan-14 05:34:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:34:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:34:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:34:00 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:34:00 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6340895804 -CF 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:34:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:34:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:34:00 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:34:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:34:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:34:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:34:01 LOG5 begin_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:34:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:34:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:34:01 LOG5 end_task: Level: (4) ID = <10510> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:34:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:34:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:34:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:34:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:34:01 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:34:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:34:01 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:34:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:34:01 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:34:01 LOG5 finish_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:34:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:34:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:34:01 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:34:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:34:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:34:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:34:01 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:34:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:34:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:34:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:34:01 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:34:01 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:34:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:34:01 LOG5 begin_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:34:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:34:01 INFO2 take_spectra: Starting WAPP scan: 801400087 2008-Jan-14 05:34:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:34:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:34:01 LOG5 begin_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Jan-14 05:34:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:34:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34442.00 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:34:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:34:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:34:03 LOG5 end_task: Level: (4) ID = <10514> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:34:03 LOG5 end_task: Level: (3) ID = <10513> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:34:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:34:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:34:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:34:03 LOG5 begin_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:34:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:34:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:34:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:34:03 LOG5 end_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:34:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:34:03 LOG5 finish_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:34:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:34:03 LOG5 end_task: Level: (2) ID = <10507> Status = 0 0 0 0 ok 2008-Jan-14 05:34:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2008-Jan-14 05:34:04 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2008-Jan-14 05:34:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:34:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:34:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:34:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:34:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:34:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:34:04 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:34:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:34:04 LOG5 begin_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Jan-14 05:34:04 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:34:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:34:04 INFO2 take_spectra: Starting WAPP scan: 801400088 2008-Jan-14 05:34:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:34:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:34:04 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Jan-14 05:34:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:34:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:34:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0032.fits 2008-Jan-14 05:34:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0032.fits} 2008-Jan-14 05:34:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34445.00 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:44:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:44:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:44:05 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2008-Jan-14 05:44:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:44:05 LOG5 end_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2008-Jan-14 05:44:05 LOG1 fixed_driftmap: New position: year = 2008.0389841115928 RA = 12:49:38.2 RA/Dec = 12:50:02.8 +25:59:17.4 2008-Jan-14 05:44:05 NOTE fixed_driftmap: Correcting ZA to 7:38:03.7 ... 2008-Jan-14 05:44:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6343679879 -CF 2008-Jan-14 05:44:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:44:05 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:44:05 LOG5 begin_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Jan-14 05:44:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:44:05 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:44:05 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:44:05 LOG5 begin_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Jan-14 05:44:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:44:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:44:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:44:05 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:44:05 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Jan-14 05:44:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6343679879 -CF 2008-Jan-14 05:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:44:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:44:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:44:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:44:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:44:06 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:44:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:44:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:44:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:44:06 LOG5 begin_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:44:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:44:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:44:06 LOG5 end_task: Level: (4) ID = <10521> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:44:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:44:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:44:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:44:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:44:06 LOG5 begin_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:44:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:44:06 LOG5 end_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:44:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:44:06 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:44:06 LOG5 finish_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:44:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:44:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:44:06 LOG5 end_task: Level: (3) ID = <10519> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:44:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:44:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:44:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:44:06 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:44:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:44:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:44:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:44:06 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:44:06 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:44:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:44:06 LOG5 begin_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2008-Jan-14 05:44:06 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:44:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:44:06 INFO2 take_spectra: Starting WAPP scan: 801400089 2008-Jan-14 05:44:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:44:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:44:07 LOG5 begin_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2008-Jan-14 05:44:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:44:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35048.00 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:44:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:44:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:44:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:44:09 LOG5 end_task: Level: (4) ID = <10525> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:44:09 LOG5 end_task: Level: (3) ID = <10524> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:44:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:44:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:44:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:44:09 LOG5 begin_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:44:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:44:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:44:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:44:09 LOG5 end_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:44:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:44:09 LOG5 finish_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:44:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:44:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:44:09 LOG5 end_task: Level: (2) ID = <10518> Status = 0 0 0 0 ok 2008-Jan-14 05:44:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2008-Jan-14 05:44:09 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2008-Jan-14 05:44:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:44:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:44:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:44:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:44:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:44:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:44:10 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:44:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:44:10 LOG5 begin_task: Level: (2) ID = <10527> Status = 0 0 0 0 ok 2008-Jan-14 05:44:10 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:44:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:44:10 INFO2 take_spectra: Starting WAPP scan: 801400090 2008-Jan-14 05:44:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:44:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:44:10 LOG5 begin_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Jan-14 05:44:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:44:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:44:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0033.fits 2008-Jan-14 05:44:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0033.fits} 2008-Jan-14 05:44:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35051.00 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:44:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:54:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:54:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:54:11 LOG5 end_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:54:11 LOG5 end_task: Level: (2) ID = <10527> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 LOG1 fixed_driftmap: New position: year = 2008.0390033145741 RA = 12:59:46.1 RA/Dec = 13:00:10.5 +25:59:18.8 2008-Jan-14 05:54:11 NOTE fixed_driftmap: Correcting ZA to 7:38:05.1 ... 2008-Jan-14 05:54:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6347397942 -CF 2008-Jan-14 05:54:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 05:54:11 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 05:54:11 LOG5 begin_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 05:54:11 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 05:54:11 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 05:54:11 LOG5 begin_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 05:54:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 05:54:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:54:11 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 05:54:11 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6347397942 -CF 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:54:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 05:54:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 05:54:11 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2008-Jan-14 05:54:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 05:54:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:54:12 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 05:54:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:54:12 LOG5 begin_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 05:54:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:54:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:54:12 LOG5 end_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:54:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 05:54:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 05:54:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:54:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 05:54:12 LOG5 begin_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 05:54:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 05:54:12 LOG5 end_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 05:54:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 05:54:12 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 05:54:12 LOG5 finish_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 05:54:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:54:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 05:54:12 LOG5 end_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 05:54:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 05:54:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 05:54:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:54:12 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:54:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 05:54:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:54:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:54:12 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 05:54:12 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 05:54:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:54:12 LOG5 begin_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2008-Jan-14 05:54:12 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 05:54:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:54:12 INFO2 take_spectra: Starting WAPP scan: 801400091 2008-Jan-14 05:54:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 05:54:13 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:54:13 LOG5 begin_task: Level: (4) ID = <10536> Status = 0 0 0 0 ok 2008-Jan-14 05:54:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:54:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35654.00 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:54:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 05:54:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 05:54:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 05:54:15 LOG5 end_task: Level: (4) ID = <10536> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 05:54:15 LOG5 end_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 05:54:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 05:54:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 05:54:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 05:54:15 LOG5 begin_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 05:54:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 05:54:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 05:54:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 05:54:15 LOG5 end_task: Level: (3) ID = <10537> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 05:54:15 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 05:54:15 LOG5 finish_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 05:54:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 05:54:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 05:54:15 LOG5 end_task: Level: (2) ID = <10529> Status = 0 0 0 0 ok 2008-Jan-14 05:54:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2008-Jan-14 05:54:15 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2008-Jan-14 05:54:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 05:54:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 05:54:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 05:54:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 05:54:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 05:54:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 05:54:16 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 05:54:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 05:54:16 LOG5 begin_task: Level: (2) ID = <10538> Status = 0 0 0 0 ok 2008-Jan-14 05:54:16 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 05:54:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 05:54:16 INFO2 take_spectra: Starting WAPP scan: 801400092 2008-Jan-14 05:54:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 05:54:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 05:54:16 LOG5 begin_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Jan-14 05:54:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 05:54:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 05:54:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0034.fits 2008-Jan-14 05:54:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0034.fits} 2008-Jan-14 05:54:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35657.00 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 05:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:01:03 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 06:01:03.302 (seconds: 21663.302)!} 2008-Jan-14 06:01:03 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 06:01:03.302 (seconds: 21663.302)! 2008-Jan-14 06:01:04 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 21662.0 to 21663.0! 2008-Jan-14 06:01:05 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (21662.0 - 21664.0)! 2008-Jan-14 06:04:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:04:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:04:17 LOG5 end_task: Level: (3) ID = <10539> Status = 0 0 0 0 ok 2008-Jan-14 06:04:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:04:17 LOG5 end_task: Level: (2) ID = <10538> Status = 0 0 0 0 ok 2008-Jan-14 06:04:17 LOG1 fixed_driftmap: New position: year = 2008.0390225175552 RA = 13:09:54.1 RA/Dec = 13:10:18.1 +25:59:20.4 2008-Jan-14 06:04:17 NOTE fixed_driftmap: Correcting ZA to 7:38:06.7 ... 2008-Jan-14 06:04:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6352038881 -CF 2008-Jan-14 06:04:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 06:04:17 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 06:04:17 LOG5 begin_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Jan-14 06:04:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 06:04:17 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 06:04:17 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:04:17 LOG5 begin_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Jan-14 06:04:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:04:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:04:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:04:17 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:04:17 LOG5 begin_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6352038881 -CF 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:04:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:04:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:04:17 LOG5 end_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2008-Jan-14 06:04:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:04:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:04:18 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:04:18 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:04:18 LOG5 begin_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Jan-14 06:04:18 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:04:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:04:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:04:19 LOG5 end_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:04:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:04:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:04:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:04:19 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:04:19 LOG5 begin_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:04:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:04:19 LOG5 end_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:04:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:04:19 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:04:19 LOG5 finish_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:04:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:04:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:04:19 LOG5 end_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:04:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:04:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:04:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:04:19 LOG5 begin_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:04:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:04:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:04:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:04:19 LOG5 end_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 06:04:19 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 06:04:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:04:19 LOG5 begin_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 06:04:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:04:19 INFO2 take_spectra: Starting WAPP scan: 801400093 2008-Jan-14 06:04:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 06:04:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:04:19 LOG5 begin_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2008-Jan-14 06:04:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:04:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36260.00 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:04:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:04:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:04:21 LOG5 end_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2008-Jan-14 06:04:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:04:21 LOG5 end_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2008-Jan-14 06:04:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:04:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:04:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:04:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:04:21 LOG5 begin_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:04:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:04:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:04:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:04:22 LOG5 end_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:04:22 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 06:04:22 LOG5 finish_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:04:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 06:04:22 LOG5 end_task: Level: (2) ID = <10540> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2008-Jan-14 06:04:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:04:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:04:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:04:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 06:04:22 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 06:04:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:04:22 LOG5 begin_task: Level: (2) ID = <10549> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 06:04:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:04:22 INFO2 take_spectra: Starting WAPP scan: 801400094 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 06:04:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:04:22 LOG5 begin_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2008-Jan-14 06:04:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:04:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:04:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0035.fits 2008-Jan-14 06:04:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0035.fits} 2008-Jan-14 06:04:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36263.00 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:14:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:14:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:14:23 LOG5 end_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2008-Jan-14 06:14:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:14:23 LOG5 end_task: Level: (2) ID = <10549> Status = 0 0 0 0 ok 2008-Jan-14 06:14:23 LOG1 fixed_driftmap: New position: year = 2008.0390417205365 RA = 13:20:02.0 RA/Dec = 13:20:25.8 +25:59:22.4 2008-Jan-14 06:14:23 NOTE fixed_driftmap: Correcting ZA to 7:38:08.7 ... 2008-Jan-14 06:14:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6357593655 -CF 2008-Jan-14 06:14:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 06:14:23 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 06:14:23 LOG5 begin_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Jan-14 06:14:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 06:14:23 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 06:14:23 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:14:23 LOG5 begin_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Jan-14 06:14:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:14:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:14:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:14:23 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:14:23 LOG5 begin_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Jan-14 06:14:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6357593655 -CF 2008-Jan-14 06:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:14:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:14:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:14:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:14:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:14:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:14:24 LOG5 end_task: Level: (4) ID = <10553> Status = 0 0 0 0 ok 2008-Jan-14 06:14:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:14:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:14:24 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:14:24 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:14:24 LOG5 begin_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Jan-14 06:14:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:14:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:14:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:14:25 LOG5 end_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:14:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:14:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:14:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:14:25 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:14:25 LOG5 begin_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:14:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:14:25 LOG5 end_task: Level: (4) ID = <10555> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:14:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:14:25 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:14:25 LOG5 finish_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:14:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:14:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:14:25 LOG5 end_task: Level: (3) ID = <10552> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:14:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:14:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:14:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:14:25 LOG5 begin_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:14:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:14:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:14:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:14:25 LOG5 end_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 06:14:25 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 06:14:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:14:25 LOG5 begin_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Jan-14 06:14:25 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 06:14:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:14:25 INFO2 take_spectra: Starting WAPP scan: 801400095 2008-Jan-14 06:14:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 06:14:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:14:26 LOG5 begin_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Jan-14 06:14:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:14:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36867.00 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:14:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:14:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:14:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:14:28 LOG5 end_task: Level: (4) ID = <10558> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:14:28 LOG5 end_task: Level: (3) ID = <10557> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:14:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:14:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:14:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:14:28 LOG5 begin_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:14:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:14:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:14:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:14:28 LOG5 end_task: Level: (3) ID = <10559> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:14:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 06:14:28 LOG5 finish_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 06:14:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:14:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 06:14:28 LOG5 end_task: Level: (2) ID = <10551> Status = 0 0 0 0 ok 2008-Jan-14 06:14:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2008-Jan-14 06:14:28 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2008-Jan-14 06:14:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:14:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:14:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:14:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:14:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 06:14:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 06:14:29 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 06:14:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:14:29 LOG5 begin_task: Level: (2) ID = <10560> Status = 0 0 0 0 ok 2008-Jan-14 06:14:29 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 06:14:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:14:29 INFO2 take_spectra: Starting WAPP scan: 801400096 2008-Jan-14 06:14:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 06:14:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:14:29 LOG5 begin_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Jan-14 06:14:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:14:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:14:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0036.fits 2008-Jan-14 06:14:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0036.fits} 2008-Jan-14 06:14:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36870.00 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:16:02 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 06:16:02.301 (seconds: 22562.301)!} 2008-Jan-14 06:16:02 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 06:16:02.301 (seconds: 22562.301)! 2008-Jan-14 06:16:03 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 22561.0 to 22562.0! 2008-Jan-14 06:16:04 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (22561.0 - 22563.0)! 2008-Jan-14 06:24:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:24:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:24:30 LOG5 end_task: Level: (3) ID = <10561> Status = 0 0 0 0 ok 2008-Jan-14 06:24:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:24:30 LOG5 end_task: Level: (2) ID = <10560> Status = 0 0 0 0 ok 2008-Jan-14 06:24:30 LOG1 fixed_driftmap: New position: year = 2008.0390609552057 RA = 13:30:11.0 RA/Dec = 13:30:34.5 +25:59:24.8 2008-Jan-14 06:24:30 NOTE fixed_driftmap: Correcting ZA to 7:38:11.1 ... 2008-Jan-14 06:24:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6364062789 -CF 2008-Jan-14 06:24:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 06:24:30 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 06:24:30 LOG5 begin_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Jan-14 06:24:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 06:24:30 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 06:24:30 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:24:30 LOG5 begin_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Jan-14 06:24:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:24:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:24:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:24:30 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:24:30 LOG5 begin_task: Level: (4) ID = <10564> Status = 0 0 0 0 ok 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6364062789 -CF 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:24:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:24:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:24:30 LOG5 end_task: Level: (4) ID = <10564> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:24:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:24:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:24:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:24:31 LOG5 begin_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:24:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:24:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:24:31 LOG5 end_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:24:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:24:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:24:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:24:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:24:31 LOG5 begin_task: Level: (4) ID = <10566> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:24:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:24:31 LOG5 end_task: Level: (4) ID = <10566> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:24:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:24:31 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:24:31 LOG5 finish_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:24:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:24:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:24:31 LOG5 end_task: Level: (3) ID = <10563> Status = 0 0 0 0 ok 2008-Jan-14 06:24:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:24:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:24:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:24:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:24:31 LOG5 begin_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Jan-14 06:24:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:24:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:24:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:24:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:24:32 LOG5 end_task: Level: (3) ID = <10567> Status = 0 0 0 0 ok 2008-Jan-14 06:24:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 06:24:32 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 06:24:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:24:32 LOG5 begin_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2008-Jan-14 06:24:32 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 06:24:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:24:32 INFO2 take_spectra: Starting WAPP scan: 801400097 2008-Jan-14 06:24:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 06:24:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:24:32 LOG5 begin_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2008-Jan-14 06:24:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:24:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37473.00 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:24:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:24:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:24:34 LOG5 end_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:24:34 LOG5 end_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:24:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:24:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:24:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:24:34 LOG5 begin_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:24:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:24:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:24:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:24:34 LOG5 end_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:24:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 06:24:34 LOG5 finish_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 06:24:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:24:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 06:24:34 LOG5 end_task: Level: (2) ID = <10562> Status = 0 0 0 0 ok 2008-Jan-14 06:24:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2008-Jan-14 06:24:34 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2008-Jan-14 06:24:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:24:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:24:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:24:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:24:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 06:24:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 06:24:35 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 06:24:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:24:35 LOG5 begin_task: Level: (2) ID = <10571> Status = 0 0 0 0 ok 2008-Jan-14 06:24:35 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 06:24:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:24:35 INFO2 take_spectra: Starting WAPP scan: 801400098 2008-Jan-14 06:24:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 06:24:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:24:35 LOG5 begin_task: Level: (3) ID = <10572> Status = 0 0 0 0 ok 2008-Jan-14 06:24:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:24:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:24:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0037.fits 2008-Jan-14 06:24:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0037.fits} 2008-Jan-14 06:24:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37476.00 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:34:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:34:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:34:36 LOG5 end_task: Level: (3) ID = <10572> Status = 0 0 0 0 ok 2008-Jan-14 06:34:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:34:36 LOG5 end_task: Level: (2) ID = <10571> Status = 0 0 0 0 ok 2008-Jan-14 06:34:36 LOG1 fixed_driftmap: New position: year = 2008.0390801581871 RA = 13:40:18.9 RA/Dec = 13:40:42.1 +25:59:27.4 2008-Jan-14 06:34:36 NOTE fixed_driftmap: Correcting ZA to 7:38:13.7 ... 2008-Jan-14 06:34:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6371412303 -CF 2008-Jan-14 06:34:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 06:34:36 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 06:34:36 LOG5 begin_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Jan-14 06:34:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 06:34:36 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 06:34:36 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:34:36 LOG5 begin_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Jan-14 06:34:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:34:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:34:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:34:36 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:34:36 LOG5 begin_task: Level: (4) ID = <10575> Status = 0 0 0 0 ok 2008-Jan-14 06:34:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6371412303 -CF 2008-Jan-14 06:34:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:34:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:34:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:34:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:34:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:34:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:34:37 LOG5 end_task: Level: (4) ID = <10575> Status = 0 0 0 0 ok 2008-Jan-14 06:34:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:34:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:34:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:34:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:34:37 LOG5 begin_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2008-Jan-14 06:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:34:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:34:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:34:38 LOG5 end_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:34:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:34:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:34:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:34:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:34:38 LOG5 begin_task: Level: (4) ID = <10577> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:34:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:34:38 LOG5 end_task: Level: (4) ID = <10577> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:34:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:34:38 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:34:38 LOG5 finish_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:34:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:34:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:34:38 LOG5 end_task: Level: (3) ID = <10574> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:34:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:34:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:34:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:34:38 LOG5 begin_task: Level: (3) ID = <10578> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:34:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:34:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:34:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:34:38 LOG5 end_task: Level: (3) ID = <10578> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 06:34:38 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 06:34:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:34:38 LOG5 begin_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 06:34:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:34:38 INFO2 take_spectra: Starting WAPP scan: 801400099 2008-Jan-14 06:34:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 06:34:38 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:34:38 LOG5 begin_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2008-Jan-14 06:34:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:34:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38079.00 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:34:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:34:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:34:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:34:40 LOG5 end_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:34:40 LOG5 end_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:34:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:34:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:34:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:34:40 LOG5 begin_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:34:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:34:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:34:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:34:40 LOG5 end_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:34:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 06:34:40 LOG5 finish_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 06:34:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:34:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 06:34:40 LOG5 end_task: Level: (2) ID = <10573> Status = 0 0 0 0 ok 2008-Jan-14 06:34:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2008-Jan-14 06:34:40 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2008-Jan-14 06:34:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:34:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:34:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:34:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:34:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 06:34:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 06:34:41 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 06:34:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:34:41 LOG5 begin_task: Level: (2) ID = <10582> Status = 0 0 0 0 ok 2008-Jan-14 06:34:41 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 06:34:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:34:41 INFO2 take_spectra: Starting WAPP scan: 801400100 2008-Jan-14 06:34:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 06:34:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:34:41 LOG5 begin_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2008-Jan-14 06:34:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:34:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:34:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0038.fits 2008-Jan-14 06:34:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0038.fits} 2008-Jan-14 06:34:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38082.00 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:34:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:44:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:44:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:44:42 LOG5 end_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:44:42 LOG5 end_task: Level: (2) ID = <10582> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 LOG1 fixed_driftmap: New position: year = 2008.0390993611682 RA = 13:50:26.9 RA/Dec = 13:50:49.8 +25:59:30.4 2008-Jan-14 06:44:42 NOTE fixed_driftmap: Correcting ZA to 7:38:16.7 ... 2008-Jan-14 06:44:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 7.6379637767 -CF 2008-Jan-14 06:44:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Jan-14 06:44:42 START begin_task: Starting task 'WAPP calibration' 2008-Jan-14 06:44:42 LOG5 begin_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Jan-14 06:44:42 INFO2 take_cal: Starting take_cal hcorcal 1 1 2008-Jan-14 06:44:42 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:44:42 LOG5 begin_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:44:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:44:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:44:42 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:44:42 LOG5 begin_task: Level: (4) ID = <10586> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 7.6379637767 -CF 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:44:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:44:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:44:42 LOG5 end_task: Level: (4) ID = <10586> Status = 0 0 0 0 ok 2008-Jan-14 06:44:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:44:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:44:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:44:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:44:43 LOG5 begin_task: Level: (4) ID = <10587> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:44:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:44:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:44:43 LOG5 end_task: Level: (4) ID = <10587> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:44:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:44:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:44:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:44:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:44:43 LOG5 begin_task: Level: (4) ID = <10588> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:44:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:44:43 LOG5 end_task: Level: (4) ID = <10588> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:44:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:44:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:44:43 LOG5 finish_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 INFO3 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:44:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:44:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:44:43 LOG5 end_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:44:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:44:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:44:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:44:43 LOG5 begin_task: Level: (3) ID = <10589> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:44:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:44:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:44:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:44:43 LOG5 end_task: Level: (3) ID = <10589> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Jan-14 06:44:43 LOG4 take_spectra: Calling 'take_spectra 1 1 CAL ON' 2008-Jan-14 06:44:43 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:44:43 LOG5 begin_task: Level: (3) ID = <10590> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 INFO3 take_spectra: Starting take_spectra 1 1 2008-Jan-14 06:44:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:44:43 INFO2 take_spectra: Starting WAPP scan: 801400101 2008-Jan-14 06:44:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Jan-14 06:44:43 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:44:43 LOG5 begin_task: Level: (4) ID = <10591> Status = 0 0 0 0 ok 2008-Jan-14 06:44:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:44:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38684.00 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:44:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:44:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:44:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Jan-14 06:44:45 LOG5 end_task: Level: (4) ID = <10591> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Jan-14 06:44:45 LOG5 end_task: Level: (3) ID = <10590> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:44:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:44:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:44:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:44:45 LOG5 begin_task: Level: (3) ID = <10592> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:44:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:44:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:44:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:44:45 LOG5 end_task: Level: (3) ID = <10592> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:44:45 STOP finish_task: Finishing task 'WAPP calibration' 2008-Jan-14 06:44:45 LOG5 finish_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Jan-14 06:44:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:44:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Jan-14 06:44:45 LOG5 end_task: Level: (2) ID = <10584> Status = 0 0 0 0 ok 2008-Jan-14 06:44:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 36 of 99 2008-Jan-14 06:44:45 LOG4 send_obs_status: To obs_status: <1> LOOP 36 2008-Jan-14 06:44:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:44:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:44:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:44:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:44:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Jan-14 06:44:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Jan-14 06:44:46 LOG4 take_spectra: Calling 'take_spectra 600 1 FIXEDAZ FIXEDAZ' 2008-Jan-14 06:44:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Jan-14 06:44:46 LOG5 begin_task: Level: (2) ID = <10593> Status = 0 0 0 0 ok 2008-Jan-14 06:44:46 INFO3 take_spectra: Starting take_spectra 600 1 2008-Jan-14 06:44:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Jan-14 06:44:46 INFO2 take_spectra: Starting WAPP scan: 801400102 2008-Jan-14 06:44:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Jan-14 06:44:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Jan-14 06:44:46 LOG5 begin_task: Level: (3) ID = <10594> Status = 0 0 0 0 ok 2008-Jan-14 06:44:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:44:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:44:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0039.fits 2008-Jan-14 06:44:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0039.fits} 2008-Jan-14 06:44:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38687.00 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:44:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:44:56 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Jan-14 06:44:56 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Jan-14 06:44:56 WARNING abort_task: WARNING abort requested! 2008-Jan-14 06:44:56 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Jan-14 06:44:56 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Jan-14 06:44:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Jan-14 06:44:56 LOG5 end_task: Level: (3) ID = <10594> Status = 1 0 0 0 abort 2008-Jan-14 06:44:56 START begin_task: Starting task 'stopping the WAPPs' 2008-Jan-14 06:44:56 LOG5 begin_task: Level: (3) ID = <10595> Status = 1 0 0 0 abort 2008-Jan-14 06:44:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Jan-14 06:44:56 INFO1 stop_wapp: Stopping the WAPPs 2008-Jan-14 06:44:56 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Jan-14 06:44:56 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Jan-14 06:44:56 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Jan-14 06:44:56 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Jan-14 06:44:56 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Jan-14 06:44:56 LOG5 begin_task: Level: (4) ID = <10596> Status = 1 0 0 0 abort 2008-Jan-14 06:44:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Jan-14 06:44:57 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Jan-14 06:44:58 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Jan-14 06:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:44:58 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Jan-14 06:44:58 LOG5 end_task: Level: (4) ID = <10596> Status = 1 0 0 0 abort 2008-Jan-14 06:44:58 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Jan-14 06:44:58 LOG5 end_task: Level: (3) ID = <10595> Status = 1 0 0 0 abort 2008-Jan-14 06:44:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Jan-14 06:44:58 LOG5 end_task: Level: (2) ID = <10593> Status = 1 0 0 0 abort 2008-Jan-14 06:44:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Jan-14 06:44:58 LOG5 finish_task: Level: (1) ID = <10196> Status = 1 0 0 0 abort 2008-Jan-14 06:44:58 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Jan-14 06:44:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Jan-14 06:44:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Jan-14 06:44:58 LOG5 end_task: Level: (1) ID = <10196> Status = 1 0 0 0 abort 2008-Jan-14 06:45:25 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Jan-14 06:45:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Jan-14 06:45:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Jan-14 06:45:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Jan-14 06:45:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Jan-14 06:45:26 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Jan-14 06:45:26 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Jan-14 06:45:26 LOG5 begin_task: Level: (1) ID = <10597> Status = 0 0 0 0 ok 2008-Jan-14 06:45:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Jan-14 06:45:26 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Jan-14 06:45:26 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Jan-14 06:45:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 06:45:26 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Jan-14 06:45:26 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Jan-14 06:45:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Jan-14 06:45:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Jan-14 06:45:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 06:45:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Jan-14 06:45:28 LOG5 begin_task: Level: (2) ID = <10598> Status = 0 0 0 0 ok 2008-Jan-14 06:45:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Jan-14 06:45:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Jan-14 06:45:28 LOG1 config_iflo: Receiver ALFA already selected 2008-Jan-14 06:45:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:45:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:45:28 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:45:28 LOG5 begin_task: Level: (3) ID = <10599> Status = 0 0 0 0 ok 2008-Jan-14 06:45:28 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:45:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:45:28 LOG5 end_task: Level: (3) ID = <10599> Status = 0 0 0 0 ok 2008-Jan-14 06:45:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:45:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:45:28 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Jan-14 06:45:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Jan-14 06:45:28 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Jan-14 06:45:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Jan-14 06:45:28 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Jan-14 06:45:28 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Jan-14 06:45:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Jan-14 06:45:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:28 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Jan-14 06:45:28 LOG5 begin_task: Level: (3) ID = <10600> Status = 0 0 0 0 ok 2008-Jan-14 06:45:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Jan-14 06:45:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Jan-14 06:45:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:45:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Jan-14 06:45:29 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Jan-14 06:45:29 LOG5 end_task: Level: (3) ID = <10600> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Jan-14 06:45:29 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Jan-14 06:45:29 LOG5 finish_task: Level: (2) ID = <10598> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 DONE finish_task: DONE finished configuration: IF/LO path 2008-Jan-14 06:45:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:45:29 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Jan-14 06:45:29 LOG5 end_task: Level: (2) ID = <10598> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Jan-14 06:45:29 LOG5 begin_task: Level: (2) ID = <10601> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Jan-14 06:45:29 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Jan-14 06:45:29 START begin_task: Starting task 'selecting calibration port' 2008-Jan-14 06:45:29 LOG5 begin_task: Level: (3) ID = <10602> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG3 vw_send: To DATATAKING: calport 3 2008-Jan-14 06:45:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Jan-14 06:45:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:29 START begin_task: Starting task 'waiting on calport' 2008-Jan-14 06:45:29 LOG5 begin_task: Level: (4) ID = <10603> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:29 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:45:29 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Jan-14 06:45:29 LOG5 end_task: Level: (4) ID = <10603> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Jan-14 06:45:29 STOP finish_task: Finishing task 'selecting calibration port' 2008-Jan-14 06:45:29 LOG5 finish_task: Level: (3) ID = <10602> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 INFO2 finish_task: DONE finished configuring: calibration port 2008-Jan-14 06:45:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:29 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Jan-14 06:45:29 LOG5 end_task: Level: (3) ID = <10602> Status = 0 0 0 0 ok 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Jan-14 06:45:29 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Jan-14 06:45:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Jan-14 06:45:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:45:30 LOG5 begin_task: Level: (3) ID = <10604> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Jan-14 06:45:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:45:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:45:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:45:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:45:30 LOG5 end_task: Level: (3) ID = <10604> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Jan-14 06:45:30 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Jan-14 06:45:30 LOG5 finish_task: Level: (2) ID = <10601> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 DONE finish_task: DONE finished configuring: the WAPPs 2008-Jan-14 06:45:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:45:30 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Jan-14 06:45:30 LOG5 end_task: Level: (2) ID = <10601> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Jan-14 06:45:30 BEGIN begin_task: Starting task 'tracking current position' 2008-Jan-14 06:45:30 LOG5 begin_task: Level: (2) ID = <10605> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Jan-14 06:45:30 INFO1 execute_trackcurpos: Starting to track the current commanded position RA = 13:51:14.0 and Dec = +26:02:11.9 2008-Jan-14 06:45:30 LOG3 track_source: Calling 'track_source Cur-pos 135114.0 260211.9 J 0.0 0.0 main {} 0 Topocentric velocity(optical)' 2008-Jan-14 06:45:30 START begin_task: Starting task 'sending tracking commands' 2008-Jan-14 06:45:30 LOG5 begin_task: Level: (3) ID = <10606> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Jan-14 06:45:30 INFO1 track_source: Starting to track Cur-pos 2008-Jan-14 06:45:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Jan-14 06:45:30 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Jan-14 06:45:30 LOG3 vw_send: To DATATAKING: pnt tr 135114.0 260211.9 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 06:45:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Jan-14 06:45:30 STOP finish_task: Finishing task 'sending tracking commands' 2008-Jan-14 06:45:30 LOG5 finish_task: Level: (3) ID = <10606> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 INFO2 finish_task: DONE finished sending: tracking commands 2008-Jan-14 06:45:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Jan-14 06:45:30 LOG5 end_task: Level: (3) ID = <10606> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 START begin_task: Starting task 'waiting on telescope' 2008-Jan-14 06:45:30 LOG5 begin_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Jan-14 06:45:30 LOG3 waittrk: Start waittrk 5 2008-Jan-14 06:45:30 START begin_task: Starting task 'waiting on telescope movement' 2008-Jan-14 06:45:30 LOG5 begin_task: Level: (4) ID = <10608> Status = 0 0 0 0 ok 2008-Jan-14 06:45:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: pnt tr 135114.0 260211.9 -CJ -o -UD 0.0 0.0 -CH 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Jan-14 06:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Jan-14 06:45:35 LOG5 end_task: Level: (4) ID = <10608> Status = 0 0 0 0 ok 2008-Jan-14 06:45:35 START begin_task: Starting task 'waiting on telescope on source' 2008-Jan-14 06:45:35 LOG5 begin_task: Level: (4) ID = <10609> Status = 0 0 0 0 ok 2008-Jan-14 06:45:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Jan-14 06:45:40 LOG5 end_task: Level: (4) ID = <10609> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Jan-14 06:45:41 INFO2 waittrk: Now tracking Cur-pos 2008-Jan-14 06:45:41 LOG4 waittrk: Current telescope position: Az = 179.44 ZA = 7.66 2008-Jan-14 06:45:41 STOP finish_task: Finishing task 'waiting on telescope' 2008-Jan-14 06:45:41 LOG5 finish_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Jan-14 06:45:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Jan-14 06:45:41 LOG5 end_task: Level: (3) ID = <10607> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 STOP finish_task: Finishing task 'tracking current position' 2008-Jan-14 06:45:41 LOG5 finish_task: Level: (2) ID = <10605> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 DONE finish_task: DONE finished tracking: current position 2008-Jan-14 06:45:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:45:41 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Jan-14 06:45:41 LOG5 end_task: Level: (2) ID = <10605> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Jan-14 06:45:41 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Jan-14 06:45:41 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Jan-14 06:45:41 LOG5 begin_task: Level: (2) ID = <10610> Status = 0 0 0 0 ok 2008-Jan-14 06:45:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Jan-14 06:45:41 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Jan-14 06:45:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Jan-14 06:45:41 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Jan-14 06:45:41 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Jan-14 06:45:41 LOG5 begin_task: Level: (3) ID = <10611> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Jan-14 06:45:42 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Jan-14 06:45:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Jan-14 06:45:42 LOG5 end_task: Level: (3) ID = <10611> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Jan-14 06:45:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Jan-14 06:45:42 LOG5 finish_task: Level: (2) ID = <10610> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Jan-14 06:45:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:45:42 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Jan-14 06:45:42 LOG5 end_task: Level: (2) ID = <10610> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Jan-14 06:45:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Jan-14 06:45:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Jan-14 06:45:42 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Jan-14 06:45:42 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Jan-14 06:45:42 LOG5 begin_task: Level: (2) ID = <10612> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Jan-14 06:45:42 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Jan-14 06:45:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Jan-14 06:45:42 START begin_task: Starting task 'selecting calibration type' 2008-Jan-14 06:45:42 LOG5 begin_task: Level: (3) ID = <10613> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Jan-14 06:45:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Jan-14 06:45:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:42 START begin_task: Starting task 'waiting on setcal' 2008-Jan-14 06:45:42 LOG5 begin_task: Level: (4) ID = <10614> Status = 0 0 0 0 ok 2008-Jan-14 06:45:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Jan-14 06:45:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:45:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Jan-14 06:45:43 LOG5 end_task: Level: (4) ID = <10614> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Jan-14 06:45:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:45:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Jan-14 06:45:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:45:43 LOG5 begin_task: Level: (4) ID = <10615> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:45:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:45:43 LOG5 end_task: Level: (4) ID = <10615> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:45:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Jan-14 06:45:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Jan-14 06:45:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:45:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Jan-14 06:45:43 LOG5 begin_task: Level: (4) ID = <10616> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 got_alfamon: From ALFAMON: ACK 2008-Jan-14 06:45:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Jan-14 06:45:43 LOG5 end_task: Level: (4) ID = <10616> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Jan-14 06:45:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Jan-14 06:45:43 STOP finish_task: Finishing task 'selecting calibration type' 2008-Jan-14 06:45:43 LOG5 finish_task: Level: (3) ID = <10613> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 INFO2 finish_task: DONE finished configuring: calibration type 2008-Jan-14 06:45:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Jan-14 06:45:43 LOG5 end_task: Level: (3) ID = <10613> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 ugradalfa 2008-Jan-14 06:45:43 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Jan-14 06:45:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Jan-14 06:45:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:45:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:45:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:45:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:45:43 LOG5 begin_task: Level: (3) ID = <10617> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 ugradalfa' 2008-Jan-14 06:45:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:45:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:45:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:45:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:45:43 LOG5 end_task: Level: (3) ID = <10617> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jan-14 06:45:43 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 06:45:43 LOG5 begin_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Jan-14 06:45:43 INFO2 adjust_power: Starting to adjust WAPP power 2008-Jan-14 06:45:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Jan-14 06:45:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Jan-14 06:45:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:43 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Jan-14 06:45:43 LOG5 begin_task: Level: (4) ID = <10619> Status = 0 0 0 0 ok 2008-Jan-14 06:45:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Jan-14 06:45:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Jan-14 06:45:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20080114.a2010.0040.fits 2008-Jan-14 06:45:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080114.a2010.0040.fits} 2008-Jan-14 06:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Jan-14 06:45:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Jan-14 06:45:46 LOG5 end_task: Level: (4) ID = <10619> Status = 0 0 0 0 ok 2008-Jan-14 06:45:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Jan-14 06:45:46 START begin_task: Starting task 'adjusting WAPP power' 2008-Jan-14 06:45:46 LOG5 begin_task: Level: (4) ID = <10620> Status = 0 0 0 0 ok 2008-Jan-14 06:45:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Jan-14 06:45:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 06:45:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 06:45:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 06:45:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Jan-14 06:45:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Jan-14 06:45:46 LOG5 begin_task: Level: (5) ID = <10621> Status = 0 0 0 0 ok 2008-Jan-14 06:45:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Jan-14 06:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 7 6 dB 2008-Jan-14 06:45:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 4 4 dB --- beam 5: 6 5 dB 2008-Jan-14 06:45:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 3 dB --- beam 3: 4 3 dB 2008-Jan-14 06:45:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 2 dB --- beam 7: 1 1 dB 2008-Jan-14 06:45:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Jan-14 06:45:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Jan-14 06:45:47 LOG5 end_task: Level: (5) ID = <10621> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.943 1.020 ALFA beam 1: 1.092 1.059 2008-Jan-14 06:45:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.078 1.092 ALFA beam 3: 0.960 1.028 2008-Jan-14 06:45:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.018 0.962 ALFA beam 5: 0.923 1.028 2008-Jan-14 06:45:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.963 1.013 ALFA beam 7: 0.939 1.086 2008-Jan-14 06:45:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 06:45:47 LOG5 finish_task: Level: (4) ID = <10620> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Jan-14 06:45:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 06:45:47 LOG5 end_task: Level: (4) ID = <10620> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Jan-14 06:45:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Jan-14 06:45:47 LOG5 finish_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Jan-14 06:45:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Jan-14 06:45:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Jan-14 06:45:47 LOG5 end_task: Level: (3) ID = <10618> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Jan-14 06:45:47 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Jan-14 06:45:47 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 06:45:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:45:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:45:47 LOG2 antvel: Parameters to Doppler: Topocentric 38747 2008 14 0.0 2008-Jan-14 06:45:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:45:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 06:45:47 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 06:45:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:45:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:45:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:45:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:45:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:45:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:45:47 LOG5 begin_task: Level: (3) ID = <10622> Status = 0 0 0 0 ok 2008-Jan-14 06:45:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:45:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.865096 2008.039101420894 18.999933 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888894 26.036638888888895 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 1 13.855233813705848 25.932068327704513 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 2 13.860293591454067 26.002169433702285 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 3 13.859010301364005 26.106908806130811 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 4 13.852506316522266 26.141162747577138 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 5 13.847423188924997 26.070065840188953 2008-Jan-14 06:45:47 LOG4 log_alfabeam: ALFABEAM 6 13.848867155034760 25.965721528813916 2008-Jan-14 06:45:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400103 2008-Jan-14 06:45:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:45:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:45:48 LOG5 begin_task: Level: (4) ID = <10623> Status = 0 0 0 0 ok 2008-Jan-14 06:45:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:45:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:45:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:45:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38749.00 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:45:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:45:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:45:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:45:59 LOG5 end_task: Level: (4) ID = <10623> Status = 0 0 0 0 ok 2008-Jan-14 06:45:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:45:59 LOG5 end_task: Level: (3) ID = <10622> Status = 0 0 0 0 ok 2008-Jan-14 06:45:59 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Jan-14 06:45:59 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Jan-14 06:45:59 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 06:45:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:45:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:45:59 LOG2 antvel: Parameters to Doppler: Topocentric 38759 2008 14 0.0 2008-Jan-14 06:45:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:45:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 06:45:59 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 06:45:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:45:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:45:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:45:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:45:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:45:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:45:59 LOG5 begin_task: Level: (3) ID = <10624> Status = 0 0 0 0 ok 2008-Jan-14 06:45:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:45:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.868439 2008.039101801151 18.999933 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888866 26.036638888888891 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 1 13.855282196058468 25.932183557200407 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 2 13.860309449230947 26.002709171032500 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 3 13.858977630277820 26.107338483618925 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 4 13.852457874288412 26.141044350437262 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 5 13.847407840414384 26.069521063773923 2008-Jan-14 06:45:59 LOG4 log_alfabeam: ALFABEAM 6 13.848900095882467 25.965300296879459 2008-Jan-14 06:45:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400104 2008-Jan-14 06:46:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:46:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:46:00 LOG5 begin_task: Level: (4) ID = <10625> Status = 0 0 0 0 ok 2008-Jan-14 06:46:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:46:00 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 06:46:00.299 (seconds: 24360.299)!} 2008-Jan-14 06:46:00 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 06:46:00.299 (seconds: 24360.299)! 2008-Jan-14 06:46:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:46:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38761.00 2008-Jan-14 06:46:02 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (24359.0 - 24361.0)! 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:46:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:46:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:46:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:46:11 LOG5 end_task: Level: (4) ID = <10625> Status = 0 0 0 0 ok 2008-Jan-14 06:46:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:46:11 LOG5 end_task: Level: (3) ID = <10624> Status = 0 0 0 0 ok 2008-Jan-14 06:46:11 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Jan-14 06:46:11 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Jan-14 06:46:11 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 06:46:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:46:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:46:11 LOG2 antvel: Parameters to Doppler: Topocentric 38771 2008 14 0.0 2008-Jan-14 06:46:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:46:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 06:46:11 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 06:46:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:46:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:46:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:46:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:46:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:46:11 LOG5 begin_task: Level: (3) ID = <10626> Status = 0 0 0 0 ok 2008-Jan-14 06:46:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:46:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.871781 2008.039102181408 18.999933 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889113 26.036638888888902 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 1 13.855330501785801 25.932302799389710 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 2 13.860325050487404 26.003249991867751 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 3 13.858944774390384 26.107765210574115 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 4 13.852409511778216 26.140921939228974 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 5 13.847392752998795 26.068975286341466 2008-Jan-14 06:46:11 LOG4 log_alfabeam: ALFABEAM 6 13.848933213245539 25.964882055374741 2008-Jan-14 06:46:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400105 2008-Jan-14 06:46:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:46:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:46:12 LOG5 begin_task: Level: (4) ID = <10627> Status = 0 0 0 0 ok 2008-Jan-14 06:46:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:46:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:46:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38773.00 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:46:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:46:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:46:23 LOG5 end_task: Level: (4) ID = <10627> Status = 0 0 0 0 ok 2008-Jan-14 06:46:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:46:23 LOG5 end_task: Level: (3) ID = <10626> Status = 0 0 0 0 ok 2008-Jan-14 06:46:23 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Jan-14 06:46:23 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Jan-14 06:46:23 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 06:46:23 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:46:23 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:46:23 LOG2 antvel: Parameters to Doppler: Topocentric 38783 2008 14 0.0 2008-Jan-14 06:46:23 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:46:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 06:46:23 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 06:46:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:46:23 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:46:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:46:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:23 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:46:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:46:23 LOG5 begin_task: Level: (3) ID = <10628> Status = 0 0 0 0 ok 2008-Jan-14 06:46:23 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:46:23 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.875123 2008.039102561665 18.999933 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889022 26.036638888888895 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 1 13.855378740075389 25.932426072531598 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 2 13.860340398412355 26.003791997197201 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 3 13.858911727703044 26.108189070142146 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 4 13.852361219796038 26.140795495452398 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 5 13.847377923520940 26.068428406432158 2008-Jan-14 06:46:23 LOG4 log_alfabeam: ALFABEAM 6 13.848966513155586 25.964466721758576 2008-Jan-14 06:46:23 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400106 2008-Jan-14 06:46:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:46:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:46:24 LOG5 begin_task: Level: (4) ID = <10629> Status = 0 0 0 0 ok 2008-Jan-14 06:46:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:46:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:46:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38785.00 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:46:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:46:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:46:35 LOG5 end_task: Level: (4) ID = <10629> Status = 0 0 0 0 ok 2008-Jan-14 06:46:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:46:35 LOG5 end_task: Level: (3) ID = <10628> Status = 0 0 0 0 ok 2008-Jan-14 06:46:35 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Jan-14 06:46:35 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Jan-14 06:46:35 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 06:46:35 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:46:35 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:46:35 LOG2 antvel: Parameters to Doppler: Topocentric 38795 2008 14 0.0 2008-Jan-14 06:46:35 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:46:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 06:46:35 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 06:46:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:46:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:46:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:46:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:46:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:46:35 LOG5 begin_task: Level: (3) ID = <10630> Status = 0 0 0 0 ok 2008-Jan-14 06:46:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:46:35 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.878466 2008.039102941922 18.999933 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888966 26.036638888888895 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 1 13.855426920061280 25.932553398412683 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 2 13.860355495977933 26.004335289085887 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 3 13.858878484042879 26.108610143002426 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 4 13.852312989203643 26.140664997078144 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 5 13.847363349047765 26.067880321571518 2008-Jan-14 06:46:35 LOG4 log_alfabeam: ALFABEAM 6 13.849000001808191 25.964054215988611 2008-Jan-14 06:46:35 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400107 2008-Jan-14 06:46:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:46:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:46:36 LOG5 begin_task: Level: (4) ID = <10631> Status = 0 0 0 0 ok 2008-Jan-14 06:46:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:46:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:46:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38797.00 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:46:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:46:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:46:47 LOG5 end_task: Level: (4) ID = <10631> Status = 0 0 0 0 ok 2008-Jan-14 06:46:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:46:47 LOG5 end_task: Level: (3) ID = <10630> Status = 0 0 0 0 ok 2008-Jan-14 06:46:47 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Jan-14 06:46:47 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Jan-14 06:46:47 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 06:46:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:46:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:46:47 LOG2 antvel: Parameters to Doppler: Topocentric 38807 2008 14 0.0 2008-Jan-14 06:46:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:46:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 06:46:47 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 06:46:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:46:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:46:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:46:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:46:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:46:47 LOG5 begin_task: Level: (3) ID = <10632> Status = 0 0 0 0 ok 2008-Jan-14 06:46:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:46:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.881808 2008.0391033221792 18.999933 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889085 26.036638888888902 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 1 13.855475007678633 25.932684682668818 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 2 13.860370332728627 26.004879481565009 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 3 13.858845067156937 26.109028133382751 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 4 13.852264854103906 26.140530541074398 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 5 13.847349039600442 26.067331421570078 2008-Jan-14 06:46:47 LOG4 log_alfabeam: ALFABEAM 6 13.849033655265176 25.963644826765638 2008-Jan-14 06:46:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400108 2008-Jan-14 06:46:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:46:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:46:48 LOG5 begin_task: Level: (4) ID = <10633> Status = 0 0 0 0 ok 2008-Jan-14 06:46:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:46:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:46:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:46:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38809.00 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:46:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:46:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:46:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:46:59 LOG5 end_task: Level: (4) ID = <10633> Status = 0 0 0 0 ok 2008-Jan-14 06:46:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:46:59 LOG5 end_task: Level: (3) ID = <10632> Status = 0 0 0 0 ok 2008-Jan-14 06:46:59 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Jan-14 06:46:59 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Jan-14 06:46:59 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 06:46:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:46:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:46:59 LOG2 antvel: Parameters to Doppler: Topocentric 38819 2008 14 0.0 2008-Jan-14 06:46:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:46:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 06:46:59 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 06:46:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:46:59 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:46:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:46:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:46:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:46:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:46:59 LOG5 begin_task: Level: (3) ID = <10634> Status = 0 0 0 0 ok 2008-Jan-14 06:46:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:46:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.885151 2008.0391037024363 18.999933 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889012 26.036638888888902 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 1 13.855523026494977 25.932819984395458 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 2 13.860384916204303 26.005424839068930 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 3 13.858811460961114 26.109443248562616 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 4 13.852216790907914 26.140392067152927 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 5 13.847334987831397 26.066781440112152 2008-Jan-14 06:46:59 LOG4 log_alfabeam: ALFABEAM 6 13.849067489709746 25.963238349997649 2008-Jan-14 06:46:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400109 2008-Jan-14 06:47:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:47:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:47:00 LOG5 begin_task: Level: (4) ID = <10635> Status = 0 0 0 0 ok 2008-Jan-14 06:47:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:47:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:47:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38821.00 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:47:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:47:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:47:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:47:11 LOG5 end_task: Level: (4) ID = <10635> Status = 0 0 0 0 ok 2008-Jan-14 06:47:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:47:11 LOG5 end_task: Level: (3) ID = <10634> Status = 0 0 0 0 ok 2008-Jan-14 06:47:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:47:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:47:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:47:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:47:11 LOG5 begin_task: Level: (3) ID = <10636> Status = 0 0 0 0 ok 2008-Jan-14 06:47:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:47:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:47:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:47:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:47:11 LOG5 end_task: Level: (3) ID = <10636> Status = 0 0 0 0 ok 2008-Jan-14 06:47:11 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Jan-14 06:47:11 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Jan-14 06:47:11 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 06:47:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:47:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:47:11 LOG2 antvel: Parameters to Doppler: Topocentric 38831 2008 14 0.0 2008-Jan-14 06:47:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:47:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 06:47:11 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 06:47:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:47:11 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:47:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:47:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:47:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:47:11 LOG5 begin_task: Level: (3) ID = <10637> Status = 0 0 0 0 ok 2008-Jan-14 06:47:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:47:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.888493 2008.0391040826933 18.999933 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888930 26.036638888888902 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 1 13.855570942608100 25.932959201923019 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 2 13.860399236426964 26.005970973879649 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 3 13.858777689527320 26.109855198379108 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 4 13.852168833549868 26.140249679584485 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 5 13.847321203275849 26.066230768578336 2008-Jan-14 06:47:11 LOG4 log_alfabeam: ALFABEAM 6 13.849101480896481 25.962835068708838 2008-Jan-14 06:47:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400110 2008-Jan-14 06:47:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:47:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:47:12 LOG5 begin_task: Level: (4) ID = <10638> Status = 0 0 0 0 ok 2008-Jan-14 06:47:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:47:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:47:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38833.00 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:47:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:47:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:47:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:47:23 LOG5 end_task: Level: (4) ID = <10638> Status = 0 0 0 0 ok 2008-Jan-14 06:47:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:47:23 LOG5 end_task: Level: (3) ID = <10637> Status = 0 0 0 0 ok 2008-Jan-14 06:47:23 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Jan-14 06:47:23 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Jan-14 06:47:23 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 06:47:23 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:47:23 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:47:23 LOG2 antvel: Parameters to Doppler: Topocentric 38843 2008 14 0.0 2008-Jan-14 06:47:23 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:47:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 06:47:23 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 06:47:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:47:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:47:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:47:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:23 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:47:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:47:23 LOG5 begin_task: Level: (3) ID = <10639> Status = 0 0 0 0 ok 2008-Jan-14 06:47:23 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:47:23 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.891836 2008.0391044629503 18.999933 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888996 26.036638888888895 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 1 13.855618779554648 25.933102396587792 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 2 13.860413300798474 26.006518151148978 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 3 13.858743736662898 26.110264188584878 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 4 13.852120958472709 26.140103315837322 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 5 13.847307678726525 26.065679139958757 2008-Jan-14 06:47:23 LOG4 log_alfabeam: ALFABEAM 6 13.849135645115229 25.962434780352766 2008-Jan-14 06:47:23 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400111 2008-Jan-14 06:47:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:47:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:47:24 LOG5 begin_task: Level: (4) ID = <10640> Status = 0 0 0 0 ok 2008-Jan-14 06:47:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:47:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:47:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38845.00 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:47:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:47:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:47:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:47:35 LOG5 end_task: Level: (4) ID = <10640> Status = 0 0 0 0 ok 2008-Jan-14 06:47:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:47:35 LOG5 end_task: Level: (3) ID = <10639> Status = 0 0 0 0 ok 2008-Jan-14 06:47:35 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Jan-14 06:47:35 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Jan-14 06:47:35 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 06:47:35 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03910 J 2008-Jan-14 06:47:35 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:47:35 LOG2 antvel: Parameters to Doppler: Topocentric 38855 2008 14 0.0 2008-Jan-14 06:47:35 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:47:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 06:47:35 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 06:47:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:47:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:47:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:47:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:47:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:47:35 LOG5 begin_task: Level: (3) ID = <10641> Status = 0 0 0 0 ok 2008-Jan-14 06:47:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:47:35 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.895178 2008.0391048432075 18.999933 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889013 26.036638888888895 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 1 13.855666503618432 25.933249459522631 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 2 13.860427099823283 26.007065981694467 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 3 13.858709626745254 26.110669934808787 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 4 13.852073199417900 26.139953087373197 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 5 13.847294423228421 26.065126946915029 2008-Jan-14 06:47:35 LOG4 log_alfabeam: ALFABEAM 6 13.849169957832169 25.962037762105197 2008-Jan-14 06:47:35 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400112 2008-Jan-14 06:47:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:47:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:47:36 LOG5 begin_task: Level: (4) ID = <10642> Status = 0 0 0 0 ok 2008-Jan-14 06:47:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:47:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:47:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38857.00 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:47:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:47:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:47:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:47:47 LOG5 end_task: Level: (4) ID = <10642> Status = 0 0 0 0 ok 2008-Jan-14 06:47:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:47:47 LOG5 end_task: Level: (3) ID = <10641> Status = 0 0 0 0 ok 2008-Jan-14 06:47:47 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Jan-14 06:47:47 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Jan-14 06:47:47 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 06:47:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:47:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:47:47 LOG2 antvel: Parameters to Doppler: Topocentric 38867 2008 14 0.0 2008-Jan-14 06:47:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:47:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 06:47:47 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 06:47:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:47:47 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:47:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:47:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:47:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:47:47 LOG5 begin_task: Level: (3) ID = <10643> Status = 0 0 0 0 ok 2008-Jan-14 06:47:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:47:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.898521 2008.0391052234645 18.999933 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888985 26.036638888888891 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 1 13.855714138303682 25.933400454314850 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 2 13.860440640764059 26.007614731375909 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 3 13.858675343473561 26.111072641257429 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 4 13.852025532861886 26.139798929406432 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 5 13.847281429715089 26.064573921752444 2008-Jan-14 06:47:47 LOG4 log_alfabeam: ALFABEAM 6 13.849204435443257 25.961643812985635 2008-Jan-14 06:47:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400113 2008-Jan-14 06:47:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:47:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:47:48 LOG5 begin_task: Level: (4) ID = <10644> Status = 0 0 0 0 ok 2008-Jan-14 06:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:47:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:47:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:47:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38869.00 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:47:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:47:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:47:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:47:59 LOG5 end_task: Level: (4) ID = <10644> Status = 0 0 0 0 ok 2008-Jan-14 06:47:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:47:59 LOG5 end_task: Level: (3) ID = <10643> Status = 0 0 0 0 ok 2008-Jan-14 06:47:59 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Jan-14 06:47:59 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Jan-14 06:47:59 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 06:47:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:47:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:47:59 LOG2 antvel: Parameters to Doppler: Topocentric 38879 2008 14 0.0 2008-Jan-14 06:47:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:47:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 06:47:59 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 06:47:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:47:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:47:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:47:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:47:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:47:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:47:59 LOG5 begin_task: Level: (3) ID = <10645> Status = 0 0 0 0 ok 2008-Jan-14 06:47:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:47:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.901863 2008.0391056037215 18.999933 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888889003 26.036638888888902 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 1 13.855761650103096 25.933555265022186 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 2 13.860453914611259 26.008164009832544 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 3 13.858640911511838 26.111472029520769 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 4 13.851977992330966 26.139640960463744 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 5 13.847268706738232 26.064020458123903 2008-Jan-14 06:47:59 LOG4 log_alfabeam: ALFABEAM 6 13.849239053145578 25.961253204162990 2008-Jan-14 06:47:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400114 2008-Jan-14 06:48:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:48:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:48:00 LOG5 begin_task: Level: (4) ID = <10646> Status = 0 0 0 0 ok 2008-Jan-14 06:48:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:48:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:48:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38881.00 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:48:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:48:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:48:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:48:11 LOG5 end_task: Level: (4) ID = <10646> Status = 0 0 0 0 ok 2008-Jan-14 06:48:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:48:11 LOG5 end_task: Level: (3) ID = <10645> Status = 0 0 0 0 ok 2008-Jan-14 06:48:11 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Jan-14 06:48:11 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Jan-14 06:48:11 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 06:48:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:48:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:48:11 LOG2 antvel: Parameters to Doppler: Topocentric 38891 2008 14 0.0 2008-Jan-14 06:48:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:48:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 06:48:11 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 06:48:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:48:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:48:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:48:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:48:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:48:11 LOG5 begin_task: Level: (3) ID = <10647> Status = 0 0 0 0 ok 2008-Jan-14 06:48:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:48:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.905206 2008.0391059839785 18.999933 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888916 26.036638888888895 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 1 13.855809062486637 25.933713957495577 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 2 13.860466928486897 26.008714083622067 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 3 13.858606314450533 26.111868302236807 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 4 13.851930554336297 26.139479113492367 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 5 13.847256247374128 26.063466287659985 2008-Jan-14 06:48:11 LOG4 log_alfabeam: ALFABEAM 6 13.849273827441007 25.960865736246255 2008-Jan-14 06:48:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400115 2008-Jan-14 06:48:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:48:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:48:12 LOG5 begin_task: Level: (4) ID = <10648> Status = 0 0 0 0 ok 2008-Jan-14 06:48:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38893.00 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:48:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:48:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:48:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:48:23 LOG5 end_task: Level: (4) ID = <10648> Status = 0 0 0 0 ok 2008-Jan-14 06:48:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:48:23 LOG5 end_task: Level: (3) ID = <10647> Status = 0 0 0 0 ok 2008-Jan-14 06:48:23 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Jan-14 06:48:23 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Jan-14 06:48:23 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 06:48:23 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:48:23 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:48:23 LOG2 antvel: Parameters to Doppler: Topocentric 38903 2008 14 0.0 2008-Jan-14 06:48:23 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:48:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 06:48:23 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 06:48:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:48:23 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:48:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:48:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:23 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:48:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:48:23 LOG5 begin_task: Level: (3) ID = <10649> Status = 0 0 0 0 ok 2008-Jan-14 06:48:23 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:48:23 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.908548 2008.0391063642355 18.999933 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888910 26.036638888888891 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 1 13.855856342178482 25.933876408854111 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 2 13.860479673870836 26.009264561491957 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 3 13.858571577220873 26.112261187111901 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 4 13.851883252166399 26.139313513943968 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 5 13.847244059678875 26.062911804715018 2008-Jan-14 06:48:23 LOG4 log_alfabeam: ALFABEAM 6 13.849308733277754 25.960481674252875 2008-Jan-14 06:48:23 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400116 2008-Jan-14 06:48:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:48:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:48:24 LOG5 begin_task: Level: (4) ID = <10650> Status = 0 0 0 0 ok 2008-Jan-14 06:48:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:48:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:48:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38905.00 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:48:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:48:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:48:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:48:35 LOG5 end_task: Level: (4) ID = <10650> Status = 0 0 0 0 ok 2008-Jan-14 06:48:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:48:35 LOG5 end_task: Level: (3) ID = <10649> Status = 0 0 0 0 ok 2008-Jan-14 06:48:35 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Jan-14 06:48:35 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Jan-14 06:48:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Jan-14 06:48:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:48:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:48:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:48:35 LOG5 begin_task: Level: (3) ID = <10651> Status = 0 0 0 0 ok 2008-Jan-14 06:48:35 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:48:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:48:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:48:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:48:35 LOG5 end_task: Level: (3) ID = <10651> Status = 0 0 0 0 ok 2008-Jan-14 06:48:35 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Jan-14 06:48:35 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Jan-14 06:48:35 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Jan-14 06:48:35 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 06:48:35 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:48:35 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:48:35 LOG2 antvel: Parameters to Doppler: Topocentric 38915 2008 14 0.0 2008-Jan-14 06:48:35 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:48:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 06:48:35 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 06:48:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:48:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:48:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:48:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:48:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:48:35 LOG5 begin_task: Level: (3) ID = <10652> Status = 0 0 0 0 ok 2008-Jan-14 06:48:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:48:36 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.911891 2008.0391067444928 18.999933 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888907 26.036638888888895 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 1 13.855903512612887 25.934042687227386 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 2 13.860492157742629 26.009815710686826 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 3 13.858536683304868 26.112650885189936 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 4 13.851836062369507 26.139144092483463 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 5 13.847232136873247 26.062356740256440 2008-Jan-14 06:48:36 LOG4 log_alfabeam: ALFABEAM 6 13.849343787263576 25.960100820408226 2008-Jan-14 06:48:36 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400117 2008-Jan-14 06:48:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:48:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:48:36 LOG5 begin_task: Level: (4) ID = <10653> Status = 0 0 0 0 ok 2008-Jan-14 06:48:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:48:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:48:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38917.00 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:48:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:48:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:48:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:48:47 LOG5 end_task: Level: (4) ID = <10653> Status = 0 0 0 0 ok 2008-Jan-14 06:48:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:48:47 LOG5 end_task: Level: (3) ID = <10652> Status = 0 0 0 0 ok 2008-Jan-14 06:48:47 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Jan-14 06:48:47 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Jan-14 06:48:47 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 06:48:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:48:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:48:47 LOG2 antvel: Parameters to Doppler: Topocentric 38927 2008 14 0.0 2008-Jan-14 06:48:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:48:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 06:48:47 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 06:48:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:48:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:48:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:48:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:48:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:48:47 LOG5 begin_task: Level: (3) ID = <10654> Status = 0 0 0 0 ok 2008-Jan-14 06:48:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:48:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.915233 2008.0391071247498 18.999933 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888939 26.036638888888898 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 1 13.855950540766766 25.934212662945690 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 2 13.860504372073093 26.010367139348446 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 3 13.858501657880684 26.113037130434670 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 4 13.851789017974843 26.138970981333994 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 5 13.847220486516745 26.061801489051131 2008-Jan-14 06:48:47 LOG4 log_alfabeam: ALFABEAM 6 13.849378964117662 25.959723433447852 2008-Jan-14 06:48:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400118 2008-Jan-14 06:48:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:48:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:48:48 LOG5 begin_task: Level: (4) ID = <10655> Status = 0 0 0 0 ok 2008-Jan-14 06:48:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:48:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:48:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:48:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38929.00 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:48:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:48:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:48:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:48:59 LOG5 end_task: Level: (4) ID = <10655> Status = 0 0 0 0 ok 2008-Jan-14 06:48:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:48:59 LOG5 end_task: Level: (3) ID = <10654> Status = 0 0 0 0 ok 2008-Jan-14 06:48:59 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Jan-14 06:48:59 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Jan-14 06:48:59 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 06:48:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:48:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:48:59 LOG2 antvel: Parameters to Doppler: Topocentric 38939 2008 14 0.0 2008-Jan-14 06:48:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:48:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 06:48:59 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 06:48:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:48:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:48:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:48:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:48:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:48:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:48:59 LOG5 begin_task: Level: (3) ID = <10656> Status = 0 0 0 0 ok 2008-Jan-14 06:48:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:48:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.918575 2008.0391075050068 18.999933 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888923 26.036638888888895 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 1 13.855997436024781 25.934386353909364 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 2 13.860516320162478 26.010918950231122 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 3 13.858466494863562 26.113420008208283 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 4 13.851742109584450 26.138794162320703 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 5 13.847209105341424 26.061245947683457 2008-Jan-14 06:48:59 LOG4 log_alfabeam: ALFABEAM 6 13.849414269970088 25.959349428645080 2008-Jan-14 06:48:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400119 2008-Jan-14 06:49:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:49:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:49:00 LOG5 begin_task: Level: (4) ID = <10657> Status = 0 0 0 0 ok 2008-Jan-14 06:49:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:49:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:49:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38941.00 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:49:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:49:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:49:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:49:11 LOG5 end_task: Level: (4) ID = <10657> Status = 0 0 0 0 ok 2008-Jan-14 06:49:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:49:11 LOG5 end_task: Level: (3) ID = <10656> Status = 0 0 0 0 ok 2008-Jan-14 06:49:11 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Jan-14 06:49:11 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Jan-14 06:49:11 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 06:49:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:49:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:49:11 LOG2 antvel: Parameters to Doppler: Topocentric 38951 2008 14 0.0 2008-Jan-14 06:49:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:49:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 06:49:11 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 06:49:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:49:11 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:49:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:49:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:49:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:49:11 LOG5 begin_task: Level: (3) ID = <10658> Status = 0 0 0 0 ok 2008-Jan-14 06:49:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:49:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.921918 2008.0391078852638 18.999933 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888973 26.036638888888891 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 1 13.856044207672703 25.934563781397070 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 2 13.860528005078798 26.011471246650213 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 3 13.858431188032629 26.113799601033971 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 4 13.851695327901954 26.138613613892858 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 5 13.847197990314555 26.060690012244272 2008-Jan-14 06:49:11 LOG4 log_alfabeam: ALFABEAM 6 13.849449711080988 25.958978724133122 2008-Jan-14 06:49:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400120 2008-Jan-14 06:49:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:49:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:49:12 LOG5 begin_task: Level: (4) ID = <10659> Status = 0 0 0 0 ok 2008-Jan-14 06:49:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:49:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:49:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38953.00 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:49:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:49:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:49:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:49:23 LOG5 end_task: Level: (4) ID = <10659> Status = 0 0 0 0 ok 2008-Jan-14 06:49:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:49:23 LOG5 end_task: Level: (3) ID = <10658> Status = 0 0 0 0 ok 2008-Jan-14 06:49:23 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Jan-14 06:49:23 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Jan-14 06:49:23 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 06:49:23 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:49:23 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:49:23 LOG2 antvel: Parameters to Doppler: Topocentric 38963 2008 14 0.0 2008-Jan-14 06:49:23 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:49:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 06:49:23 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 06:49:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:49:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:49:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:49:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:23 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:49:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:49:23 LOG5 begin_task: Level: (3) ID = <10660> Status = 0 0 0 0 ok 2008-Jan-14 06:49:23 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:49:23 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.925260 2008.0391082655208 18.999933 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888923 26.036638888888891 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 1 13.856090823105347 25.934744805864533 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 2 13.860539419530284 26.012023636371339 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 3 13.858395762897525 26.114175652494154 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 4 13.851648705529092 26.138429478115590 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 5 13.847187148251008 26.060134077583399 2008-Jan-14 06:49:23 LOG4 log_alfabeam: ALFABEAM 6 13.849485261864599 25.958611569012195 2008-Jan-14 06:49:23 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400121 2008-Jan-14 06:49:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:49:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:49:24 LOG5 begin_task: Level: (4) ID = <10661> Status = 0 0 0 0 ok 2008-Jan-14 06:49:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:49:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:49:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38965.00 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:49:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:49:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:49:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:49:35 LOG5 end_task: Level: (4) ID = <10661> Status = 0 0 0 0 ok 2008-Jan-14 06:49:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:49:35 LOG5 end_task: Level: (3) ID = <10660> Status = 0 0 0 0 ok 2008-Jan-14 06:49:35 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Jan-14 06:49:35 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Jan-14 06:49:35 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 06:49:35 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:49:35 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:49:35 LOG2 antvel: Parameters to Doppler: Topocentric 38975 2008 14 0.0 2008-Jan-14 06:49:35 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:49:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 06:49:35 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 06:49:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:49:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:49:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:49:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:49:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:49:35 LOG5 begin_task: Level: (3) ID = <10662> Status = 0 0 0 0 ok 2008-Jan-14 06:49:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:49:35 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.928603 2008.039108645778 18.999933 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888948 26.036638888888898 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 1 13.856137305658516 25.934929501216153 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 2 13.860550570132476 26.012576388299333 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 3 13.858360202670017 26.114548359512632 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 4 13.851602219115200 26.138241679869139 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 5 13.847176572741205 26.059577873070015 2008-Jan-14 06:49:35 LOG4 log_alfabeam: ALFABEAM 6 13.849520939192223 25.958247769687805 2008-Jan-14 06:49:35 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400122 2008-Jan-14 06:49:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:49:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:49:36 LOG5 begin_task: Level: (4) ID = <10663> Status = 0 0 0 0 ok 2008-Jan-14 06:49:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:49:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:49:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38977.00 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:49:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:49:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:49:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:49:47 LOG5 end_task: Level: (4) ID = <10663> Status = 0 0 0 0 ok 2008-Jan-14 06:49:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:49:47 LOG5 end_task: Level: (3) ID = <10662> Status = 0 0 0 0 ok 2008-Jan-14 06:49:47 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Jan-14 06:49:47 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Jan-14 06:49:47 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 06:49:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:49:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:49:47 LOG2 antvel: Parameters to Doppler: Topocentric 38987 2008 14 0.0 2008-Jan-14 06:49:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:49:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 06:49:47 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 06:49:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:49:47 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:49:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:49:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF OFF' 2008-Jan-14 06:49:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:49:47 LOG5 begin_task: Level: (3) ID = <10664> Status = 0 0 0 0 ok 2008-Jan-14 06:49:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:49:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.931945 2008.039109026035 18.999933 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888894 26.036638888888898 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 1 13.856183623030372 25.935117721546799 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 2 13.860561450084356 26.013129110299747 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 3 13.858324533054780 26.114917472218206 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 4 13.851555900952368 26.138050367553674 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 5 13.847166270105289 26.059021793256800 2008-Jan-14 06:49:47 LOG4 log_alfabeam: ALFABEAM 6 13.849556717300487 25.957887568715716 2008-Jan-14 06:49:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400123 2008-Jan-14 06:49:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:49:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:49:48 LOG5 begin_task: Level: (4) ID = <10665> Status = 0 0 0 0 ok 2008-Jan-14 06:49:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:49:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:49:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:49:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38989.00 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:49:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:49:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:49:59 LOG5 end_task: Level: (4) ID = <10665> Status = 0 0 0 0 ok 2008-Jan-14 06:49:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:49:59 LOG5 end_task: Level: (3) ID = <10664> Status = 0 0 0 0 ok 2008-Jan-14 06:49:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Jan-14 06:49:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Jan-14 06:49:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Jan-14 06:49:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:49:59 LOG5 begin_task: Level: (3) ID = <10666> Status = 0 0 0 0 ok 2008-Jan-14 06:49:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:49:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Jan-14 06:49:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:49:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:49:59 LOG5 end_task: Level: (3) ID = <10666> Status = 0 0 0 0 ok 2008-Jan-14 06:49:59 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Jan-14 06:49:59 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Jan-14 06:49:59 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Jan-14 06:49:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:49:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:49:59 LOG2 antvel: Parameters to Doppler: Topocentric 38999 2008 14 0.0 2008-Jan-14 06:49:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:49:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Jan-14 06:49:59 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Jan-14 06:49:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:49:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:49:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:49:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:49:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:49:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:49:59 LOG5 begin_task: Level: (3) ID = <10667> Status = 0 0 0 0 ok 2008-Jan-14 06:49:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:49:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.935288 2008.039109406292 18.999933 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888907 26.036638888888902 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 1 13.856229798512894 25.935309543105763 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 2 13.860572065851839 26.013682071913902 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 3 13.858288737155698 26.115283185823717 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 4 13.851509727734715 26.137855463700131 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 5 13.847156234085615 26.058465566902829 2008-Jan-14 06:49:59 LOG4 log_alfabeam: ALFABEAM 6 13.849592613165660 25.957530774237867 2008-Jan-14 06:49:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400124 2008-Jan-14 06:50:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:50:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:50:00 LOG5 begin_task: Level: (4) ID = <10668> Status = 0 0 0 0 ok 2008-Jan-14 06:50:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:50:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Jan-14 06:50:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39001.00 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:50:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:50:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:50:11 LOG5 end_task: Level: (4) ID = <10668> Status = 0 0 0 0 ok 2008-Jan-14 06:50:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:50:11 LOG5 end_task: Level: (3) ID = <10667> Status = 0 0 0 0 ok 2008-Jan-14 06:50:11 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Jan-14 06:50:11 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Jan-14 06:50:11 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Jan-14 06:50:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:50:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:50:11 LOG2 antvel: Parameters to Doppler: Topocentric 39011 2008 14 0.0 2008-Jan-14 06:50:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:50:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Jan-14 06:50:11 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Jan-14 06:50:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:50:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:50:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:50:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:50:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:50:11 LOG5 begin_task: Level: (3) ID = <10669> Status = 0 0 0 0 ok 2008-Jan-14 06:50:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:50:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.938630 2008.039109786549 18.999933 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888921 26.036638888888891 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 1 13.856275800126536 25.935504813817502 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 2 13.860582411123136 26.014234881383327 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 3 13.858252840851893 26.115645257093899 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 4 13.851463731426110 26.137657122850069 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 5 13.847146470510095 26.057909587986902 2008-Jan-14 06:50:11 LOG4 log_alfabeam: ALFABEAM 6 13.849628600867618 25.957177622186286 2008-Jan-14 06:50:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400125 2008-Jan-14 06:50:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:50:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:50:12 LOG5 begin_task: Level: (4) ID = <10670> Status = 0 0 0 0 ok 2008-Jan-14 06:50:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:50:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Jan-14 06:50:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39013.00 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:50:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:50:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:50:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:50:23 LOG5 end_task: Level: (4) ID = <10670> Status = 0 0 0 0 ok 2008-Jan-14 06:50:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:50:23 LOG5 end_task: Level: (3) ID = <10669> Status = 0 0 0 0 ok 2008-Jan-14 06:50:23 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Jan-14 06:50:23 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Jan-14 06:50:23 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Jan-14 06:50:23 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:50:23 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:50:23 LOG2 antvel: Parameters to Doppler: Topocentric 39023 2008 14 0.0 2008-Jan-14 06:50:23 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:50:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Jan-14 06:50:23 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Jan-14 06:50:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:50:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:50:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:50:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:23 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:50:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:50:23 LOG5 begin_task: Level: (3) ID = <10671> Status = 0 0 0 0 ok 2008-Jan-14 06:50:23 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:50:23 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.941973 2008.039110166806 18.999933 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888953 26.036638888888902 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 1 13.856321651116557 25.935703612297750 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 2 13.860592492212097 26.014787808866590 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 3 13.858216827139644 26.116003879490027 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 4 13.851417888768665 26.137455265163943 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 5 13.847136973275635 26.057353584678513 2008-Jan-14 06:50:23 LOG4 log_alfabeam: ALFABEAM 6 13.849664697487082 25.956827922481029 2008-Jan-14 06:50:23 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400126 2008-Jan-14 06:50:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:50:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:50:24 LOG5 begin_task: Level: (4) ID = <10672> Status = 0 0 0 0 ok 2008-Jan-14 06:50:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:50:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Jan-14 06:50:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39025.00 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:50:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:50:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:50:35 LOG5 end_task: Level: (4) ID = <10672> Status = 0 0 0 0 ok 2008-Jan-14 06:50:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:50:35 LOG5 end_task: Level: (3) ID = <10671> Status = 0 0 0 0 ok 2008-Jan-14 06:50:35 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Jan-14 06:50:35 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Jan-14 06:50:35 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Jan-14 06:50:35 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:50:35 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:50:35 LOG2 antvel: Parameters to Doppler: Topocentric 39035 2008 14 0.0 2008-Jan-14 06:50:35 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:50:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Jan-14 06:50:35 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Jan-14 06:50:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:50:35 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:50:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:50:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:35 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:50:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:50:35 LOG5 begin_task: Level: (3) ID = <10673> Status = 0 0 0 0 ok 2008-Jan-14 06:50:35 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:50:35 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.945315 2008.0391105470633 18.999933 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888930 26.036638888888898 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 1 13.856367319843260 25.935905780500690 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 2 13.860602303293144 26.015340463252432 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 3 13.858180722051301 26.116358816487370 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 4 13.851372231379948 26.137250051121558 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 5 13.847127747721233 26.056797950111449 2008-Jan-14 06:50:35 LOG4 log_alfabeam: ALFABEAM 6 13.849700876967779 25.956481904365837 2008-Jan-14 06:50:35 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400127 2008-Jan-14 06:50:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:50:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:50:36 LOG5 begin_task: Level: (4) ID = <10674> Status = 0 0 0 0 ok 2008-Jan-14 06:50:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:50:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Jan-14 06:50:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39037.00 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:50:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:50:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:50:47 LOG5 end_task: Level: (4) ID = <10674> Status = 0 0 0 0 ok 2008-Jan-14 06:50:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:50:47 LOG5 end_task: Level: (3) ID = <10673> Status = 0 0 0 0 ok 2008-Jan-14 06:50:47 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Jan-14 06:50:47 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Jan-14 06:50:47 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Jan-14 06:50:47 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:50:47 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:50:47 LOG2 antvel: Parameters to Doppler: Topocentric 39047 2008 14 0.0 2008-Jan-14 06:50:47 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:50:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Jan-14 06:50:47 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Jan-14 06:50:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:50:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:50:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:50:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:47 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:50:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:50:47 LOG5 begin_task: Level: (3) ID = <10675> Status = 0 0 0 0 ok 2008-Jan-14 06:50:47 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:50:47 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.948658 2008.0391109273203 18.999933 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888880 26.036638888888895 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 1 13.856412829502011 25.936111399429922 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 2 13.860611850525553 26.015893115294585 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 3 13.858144508476240 26.116710259751404 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 4 13.851326736053329 26.137041398490915 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 5 13.847118787901119 26.056242411888672 2008-Jan-14 06:50:47 LOG4 log_alfabeam: ALFABEAM 6 13.849737156494379 25.956139379583213 2008-Jan-14 06:50:47 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400128 2008-Jan-14 06:50:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:50:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:50:48 LOG5 begin_task: Level: (4) ID = <10676> Status = 0 0 0 0 ok 2008-Jan-14 06:50:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:50:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Jan-14 06:50:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:50:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39049.00 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:50:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:50:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:50:59 LOG5 end_task: Level: (4) ID = <10676> Status = 0 0 0 0 ok 2008-Jan-14 06:50:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:50:59 LOG5 end_task: Level: (3) ID = <10675> Status = 0 0 0 0 ok 2008-Jan-14 06:50:59 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Jan-14 06:50:59 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Jan-14 06:50:59 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Jan-14 06:50:59 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:50:59 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:50:59 LOG2 antvel: Parameters to Doppler: Topocentric 39059 2008 14 0.0 2008-Jan-14 06:50:59 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:50:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Jan-14 06:50:59 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Jan-14 06:50:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:50:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:50:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:50:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:50:59 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:50:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:50:59 LOG5 begin_task: Level: (3) ID = <10677> Status = 0 0 0 0 ok 2008-Jan-14 06:50:59 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:50:59 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.952000 2008.0391113075773 18.999933 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888916 26.036638888888895 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 1 13.856458148809992 25.936320305278329 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 2 13.860621128566514 26.016445374794298 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 3 13.858108212579380 26.117057979527761 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 4 13.851281434043972 26.136829473478507 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 5 13.847110098670054 26.055687362034167 2008-Jan-14 06:50:59 LOG4 log_alfabeam: ALFABEAM 6 13.849773509895334 25.955800570638729 2008-Jan-14 06:50:59 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400129 2008-Jan-14 06:51:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:51:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:51:00 LOG5 begin_task: Level: (4) ID = <10678> Status = 0 0 0 0 ok 2008-Jan-14 06:51:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:51:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Jan-14 06:51:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:51:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39061.00 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:51:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:51:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:51:11 LOG5 end_task: Level: (4) ID = <10678> Status = 0 0 0 0 ok 2008-Jan-14 06:51:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:51:11 LOG5 end_task: Level: (3) ID = <10677> Status = 0 0 0 0 ok 2008-Jan-14 06:51:11 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Jan-14 06:51:11 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Jan-14 06:51:11 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Jan-14 06:51:11 LOG2 antvel: Precessing RA = 13:51:14.0 Dec = +26:02:11.9 Epoch = 2008.03911 J 2008-Jan-14 06:51:11 LOG2 antvel: Computed apparent RA = 13:51:36.9 Dec = +25:59:30.5 2008-Jan-14 06:51:11 LOG2 antvel: Parameters to Doppler: Topocentric 39071 2008 14 0.0 2008-Jan-14 06:51:11 INFO5 antvel: Computed antenna velocity: 0.00000 km/s 2008-Jan-14 06:51:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Jan-14 06:51:11 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Jan-14 06:51:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Jan-14 06:51:11 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Jan-14 06:51:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:51:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:51:11 LOG4 take_spectra: Calling 'take_spectra 10 1 SMARTF ON' 2008-Jan-14 06:51:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Jan-14 06:51:11 LOG5 begin_task: Level: (3) ID = <10679> Status = 0 0 0 0 ok 2008-Jan-14 06:51:11 INFO3 take_spectra: Starting take_spectra 10 1 2008-Jan-14 06:51:11 LOG5 log_alfabeam: Parameters: 13.853888888888889 26.036638888888888 13.955343 2008.0391116878343 18.999933 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 0 13.853888888888903 26.036638888888902 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 1 13.856503300909150 25.936532581459165 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 2 13.860630143417668 26.016997513075793 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 3 13.858071817143577 26.117402165639415 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 4 13.851236302199574 26.136614191438532 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 5 13.847101674242136 26.055132527610795 2008-Jan-14 06:51:11 LOG4 log_alfabeam: ALFABEAM 6 13.849809954458157 25.955465291144723 2008-Jan-14 06:51:11 INFO2 take_spectra: Starting WAPP+GALFA scan: 801400130 2008-Jan-14 06:51:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Jan-14 06:51:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Jan-14 06:51:12 LOG5 begin_task: Level: (4) ID = <10680> Status = 0 0 0 0 ok 2008-Jan-14 06:51:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Jan-14 06:51:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Jan-14 06:51:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Jan-14 06:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:51:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39073.00 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2008-Jan-14 06:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2008-Jan-14 06:51:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Jan-14 06:51:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Jan-14 06:51:23 LOG5 end_task: Level: (4) ID = <10680> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Jan-14 06:51:23 LOG5 end_task: Level: (3) ID = <10679> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 INFO2 smartfreq: Switching off CAL 2008-Jan-14 06:51:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Jan-14 06:51:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Jan-14 06:51:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Jan-14 06:51:23 LOG5 begin_task: Level: (3) ID = <10681> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 LOG3 CALCONTROL-caltrig: Software trigger 2008-Jan-14 06:51:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Jan-14 06:51:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Jan-14 06:51:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Jan-14 06:51:23 LOG5 end_task: Level: (3) ID = <10681> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 STOP finish_task: Finishing task 'smart frequency switching' 2008-Jan-14 06:51:23 LOG5 finish_task: Level: (2) ID = <10612> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Jan-14 06:51:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:51:23 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Jan-14 06:51:23 LOG5 end_task: Level: (2) ID = <10612> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 WARNING smartfreq: WARNING smart frequency switching changes the frequency settings! 2008-Jan-14 06:51:23 ALERT smartfreq: Don't forget to set new frequencies! 2008-Jan-14 06:51:23 NOTE run_command_file: DONE with command file processing 2008-Jan-14 06:51:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Jan-14 06:51:23 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Jan-14 06:51:23 LOG5 finish_task: Level: (1) ID = <10597> Status = 0 0 0 0 ok 2008-Jan-14 06:51:23 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Jan-14 06:51:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Jan-14 06:51:23 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Jan-14 06:51:24 LOG5 end_task: Level: (1) ID = <10597> Status = 0 0 0 0 ok 2008-Jan-14 06:52:14 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Jan-14 06:52:14 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Jan-14 06:52:14 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Jan-14 06:52:14 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Jan-14 06:52:14 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Jan-14 06:52:14 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Jan-14 06:52:14 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Jan-14 06:52:14 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Jan-14 06:52:14 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Jan-14 06:52:14 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Jan-14 06:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:52:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Jan-14 06:52:16 LOG3 exec_msg: Closing socket