2009-Feb-28 23:05:50 BEGIN executive: CIMA executive starting ... 2009-Feb-28 23:05:50 NOTE executive: STARTING NEW CIMA SESSION 2009-Feb-28 23:05:50 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Feb-28 23:05:50 INFO4 executive: This is an ON-LINE session 2009-Feb-28 23:05:50 INFO4 executive: This is a LOCAL session 2009-Feb-28 23:05:50 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Feb-28 23:05:50 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Riccardo, Shan' 2009-Feb-28 23:05:50 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090228' 2009-Feb-28 23:05:50 LOG2 log_preferences: Currently applied preferences: 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(dailylog) = daily 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(datawindow) = open 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(logcolours) = full 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(displayformat) = long 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(logformat) = new 2009-Feb-28 23:05:50 LOG2 log_preferences: prefs(fontsize) = 3 2009-Feb-28 23:05:50 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Feb-28 23:05:50 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Feb-28 23:05:50 ALERT executive: CIMA executive ready 2009-Feb-28 23:05:52 NOTE frontend: CIMA frontend ready 2009-Feb-28 23:05:53 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Feb-28 23:05:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:05:54 LOG4 got_cormsg: From DATATAKING: setup 2009-Feb-28 23:05:56 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Feb-28 23:05:56 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Feb-28 23:05:56 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Feb-28 23:05:56 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Feb-28 23:05:56 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-28 23:05:56 NOTE select_receiver: Starting to select receiver ALFA 2009-Feb-28 23:05:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Feb-28 23:05:56 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Feb-28 23:05:56 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Feb-28 23:05:56 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Feb-28 23:05:56 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Feb-28 23:05:56 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-28 23:05:56 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Feb-28 23:05:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:05:56 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Feb-28 23:05:56 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-28 23:06:06 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Feb-28 23:06:06 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Feb-28 23:06:06 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Feb-28 23:06:06 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Feb-28 23:06:06 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Feb-28 23:06:06 NOTE restart_wapp: Restarting all WAPPs 2009-Feb-28 23:06:06 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Feb-28 23:06:06 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Feb-28 23:06:06 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Feb-28 23:06:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Feb-28 23:06:08 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Feb-28 23:06:08 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Feb-28 23:06:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:06:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:06:09 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Feb-28 23:06:09 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Feb-28 23:06:09 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Feb-28 23:06:09 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Feb-28 23:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:06:51 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Feb-28 23:06:55 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Feb-28 23:06:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Feb-28 23:06:55 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Feb-28 23:06:55 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Feb-28 23:06:55 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Feb-28 23:06:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Feb-28 23:06:55 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Feb-28 23:06:55 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Feb-28 23:06:55 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Feb-28 23:06:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Feb-28 23:06:55 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Feb-28 23:06:56 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Feb-28 23:06:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-28 23:06:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Feb-28 23:06:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Feb-28 23:06:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Feb-28 23:06:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Feb-28 23:06:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Feb-28 23:06:58 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Feb-28 23:06:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Feb-28 23:06:58 INFO1 config_iflo: Selecting receiver ALFA 2009-Feb-28 23:06:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Feb-28 23:06:58 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Feb-28 23:06:58 START begin_task: Starting task 'selecting receiver ALFA' 2009-Feb-28 23:06:58 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 NOTE select_receiver: Starting to select receiver ALFA 2009-Feb-28 23:06:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Feb-28 23:06:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Feb-28 23:06:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Feb-28 23:06:58 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Feb-28 23:06:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:06:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Feb-28 23:06:58 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Feb-28 23:06:58 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Feb-28 23:06:58 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Feb-28 23:06:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Feb-28 23:06:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:06:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:06:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:06:58 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:06:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:06:58 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:06:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Feb-28 23:06:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Feb-28 23:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Feb-28 23:06:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Feb-28 23:06:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:06:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Feb-28 23:06:58 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Feb-28 23:06:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Feb-28 23:06:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Feb-28 23:06:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Feb-28 23:06:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:07:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Feb-28 23:07:14 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Feb-28 23:07:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Feb-28 23:07:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Feb-28 23:07:14 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-28 23:07:14 DONE finish_task: DONE finished configuration: IF/LO path 2009-Feb-28 23:07:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:07:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Feb-28 23:07:14 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-28 23:07:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Feb-28 23:07:14 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-28 23:07:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Feb-28 23:07:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Feb-28 23:07:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Feb-28 23:07:15 START begin_task: Starting task 'selecting calibration port' 2009-Feb-28 23:07:15 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 vw_send: To DATATAKING: calport 3 2009-Feb-28 23:07:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Feb-28 23:07:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:07:15 START begin_task: Starting task 'waiting on calport' 2009-Feb-28 23:07:15 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:07:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Feb-28 23:07:15 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Feb-28 23:07:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Feb-28 23:07:15 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:07:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:07:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:07:15 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:07:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:07:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:07:15 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Feb-28 23:07:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Feb-28 23:07:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:07:15 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:07:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:07:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:07:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:07:15 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:07:16 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Feb-28 23:07:16 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:07:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Feb-28 23:07:16 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Feb-28 23:07:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Feb-28 23:07:16 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Feb-28 23:07:16 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Feb-28 23:07:16 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Feb-28 23:07:16 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Feb-28 23:07:16 LOG3 track_source: Calling 'track_source galfasrc 091700.0 +233612 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Feb-28 23:07:16 START begin_task: Starting task 'sending tracking commands' 2009-Feb-28 23:07:16 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Feb-28 23:07:16 INFO1 track_source: Starting to track galfasrc 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: set ra 091700.0 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: set dec +233612 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: pnt tr 091700.0 +233612 -CJ 2009-Feb-28 23:07:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Feb-28 23:07:16 STOP finish_task: Finishing task 'sending tracking commands' 2009-Feb-28 23:07:16 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 INFO2 finish_task: DONE finished sending: tracking commands 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:07:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Feb-28 23:07:16 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Feb-28 23:07:16 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:07:16 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Feb-28 23:07:16 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Feb-28 23:07:16 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Feb-28 23:07:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:07:16 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Feb-28 23:07:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Feb-28 23:07:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Feb-28 23:07:16 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Feb-28 23:07:16 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Feb-28 23:07:16 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Feb-28 23:07:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:07:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0000.fits 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Feb-28 23:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Feb-28 23:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Feb-28 23:07:17 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090228.a2010.0000.fits} 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: set ra 091700.0 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: set dec +233612 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: vw% 091700.0 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: vw% +233612 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: pnt tr 091700.0 +233612 -CJ 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Feb-28 23:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:07:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Feb-28 23:07:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Feb-28 23:07:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Feb-28 23:07:56 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Feb-28 23:07:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Feb-28 23:07:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:07:56 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-28 23:07:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Feb-28 23:07:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:07:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Feb-28 23:07:56 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-28 23:07:56 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Feb-28 23:07:56 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Feb-28 23:07:56 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-28 23:07:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Feb-28 23:07:56 LOG3 waittrk: Start waittrk 5 2009-Feb-28 23:07:56 START begin_task: Starting task 'waiting on telescope movement' 2009-Feb-28 23:07:56 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Feb-28 23:08:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Feb-28 23:08:01 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Feb-28 23:08:01 START begin_task: Starting task 'waiting on telescope on source' 2009-Feb-28 23:08:01 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Feb-28 23:08:02 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Feb-28 23:08:02 INFO2 waittrk: Now tracking galfasrc 2009-Feb-28 23:08:02 LOG4 waittrk: Current telescope position: Az = 180.53 ZA = 5.23 2009-Feb-28 23:08:02 STOP finish_task: Finishing task 'waiting on telescope' 2009-Feb-28 23:08:02 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 DONE finish_task: DONE finished waiting: telescope on source 2009-Feb-28 23:08:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:08:02 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Feb-28 23:08:02 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Feb-28 23:08:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Feb-28 23:08:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Feb-28 23:08:02 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Feb-28 23:08:02 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Feb-28 23:08:02 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Feb-28 23:08:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Feb-28 23:08:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Feb-28 23:08:02 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:08:02 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:08:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:08:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:08:02 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:08:02 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Feb-28 23:08:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:08:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:08:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:08:03 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Feb-28 23:08:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:08:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:08:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:08:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:08:03 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Feb-28 23:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:08:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:08:04 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:08:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:08:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:08:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:08:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:08:04 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:08:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:08:04 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:08:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:08:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:08:04 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:08:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:08:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:08:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:08:04 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090228.a2010.0000.fits' is empty! 2009-Feb-28 23:08:04 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Feb-28 23:08:04 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Feb-28 23:08:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:08:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:08:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:08:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:08:04 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:08:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:08:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:08:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:08:04 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Feb-28 23:08:04 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:08:04 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Feb-28 23:08:04 INFO2 adjust_power: Starting to adjust WAPP power 2009-Feb-28 23:08:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Feb-28 23:08:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Feb-28 23:08:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:08:04 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Feb-28 23:08:04 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Feb-28 23:08:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Feb-28 23:08:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:08:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:08:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Feb-28 23:08:08 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Feb-28 23:08:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Feb-28 23:08:08 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:08:08 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-28 23:08:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Feb-28 23:08:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:08:08 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:08:08 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:08:08 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:08:08 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Feb-28 23:08:08 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Feb-28 23:08:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Feb-28 23:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:08 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Feb-28 23:08:08 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Feb-28 23:08:08 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Feb-28 23:08:08 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Feb-28 23:08:08 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Feb-28 23:08:08 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Feb-28 23:08:08 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Feb-28 23:08:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.992 0.908 ALFA beam 1: 1.044 1.047 2009-Feb-28 23:08:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.024 0.964 ALFA beam 3: 1.073 1.077 2009-Feb-28 23:08:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.075 0.953 ALFA beam 5: 0.997 1.058 2009-Feb-28 23:08:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.915 0.106 ALFA beam 7: 1.013 0.115 2009-Feb-28 23:08:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:08:08 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-28 23:08:08 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Feb-28 23:08:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:08:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:08:09 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-28 23:08:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:08:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:08:09 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-28 23:08:09 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Feb-28 23:08:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:08:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:08:09 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-28 23:08:09 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Feb-28 23:08:09 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:08:09 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Feb-28 23:08:09 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:08:09 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:08:09 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:08:09 LOG2 antvel: Parameters to Doppler: Topocentric 97688 2009 59 0.0 2009-Feb-28 23:08:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:08:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Feb-28 23:08:09 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Feb-28 23:08:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:08:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Feb-28 23:08:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:08:09 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Feb-28 23:08:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:08:09 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.289333 2009.1641724338986 18.999933 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 0 9.283333333332775 23.603333333333335 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 1 9.284522354323833 23.498478205228881 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 2 9.289559053869407 23.567266363915490 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 3 9.288457311596748 23.672341398944038 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 4 9.282091487428124 23.708133023773751 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 5 9.277019935353009 23.637922351994881 2009-Feb-28 23:08:09 LOG4 log_alfabeam: ALFABEAM 6 9.278348668426837 23.533364805647697 2009-Feb-28 23:08:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900242 2009-Feb-28 23:08:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:08:09 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Feb-28 23:08:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:08:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:08:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:08:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11290.00 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:08:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Feb-28 23:08:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.908 1.044 1.047 2009-Feb-28 23:08:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.964 1.073 1.077 2009-Feb-28 23:08:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.953 0.997 1.058 2009-Feb-28 23:08:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.013 0.115 2009-Feb-28 23:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.141 (still bad) 2009-Feb-28 23:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.139 (still bad) 2009-Feb-28 23:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.139 (still bad) 2009-Feb-28 23:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.138 (still bad) 2009-Feb-28 23:08:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:08:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:08:20 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Feb-28 23:08:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:08:20 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Feb-28 23:08:20 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Feb-28 23:08:20 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:08:20 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Feb-28 23:08:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:08:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:08:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:08:20 LOG2 antvel: Parameters to Doppler: Topocentric 97700 2009 59 0.0 2009-Feb-28 23:08:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:08:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Feb-28 23:08:20 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Feb-28 23:08:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:08:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:08:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:08:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Feb-28 23:08:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:08:20 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Feb-28 23:08:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:08:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.292676 2009.1641728141558 18.999933 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333336504 23.603333333333371 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 1 9.284592019864073 23.498632061796489 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 2 9.289582803530385 23.568050506396833 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 3 9.288411169079511 23.672982648681661 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 4 9.282021749742892 23.707972520216689 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 5 9.276997195956159 23.637127211681626 2009-Feb-28 23:08:20 LOG4 log_alfabeam: ALFABEAM 6 9.278395422705426 23.532741083224934 2009-Feb-28 23:08:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900243 2009-Feb-28 23:08:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:08:21 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Feb-28 23:08:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:08:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:08:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:08:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11302.00 2009-Feb-28 23:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.139 (still bad) 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:08:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad) 2009-Feb-28 23:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-Feb-28 23:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:08:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:08:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:08:32 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Feb-28 23:08:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:08:32 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Feb-28 23:08:32 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Feb-28 23:08:32 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:08:32 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Feb-28 23:08:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:08:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:08:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:08:32 LOG2 antvel: Parameters to Doppler: Topocentric 97712 2009 59 0.0 2009-Feb-28 23:08:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:08:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Feb-28 23:08:32 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Feb-28 23:08:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:08:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:08:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:08:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Feb-28 23:08:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:08:32 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Feb-28 23:08:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:08:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.296018 2009.1641731944128 18.999933 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333868 23.603333333333339 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 1 9.284661559826045 23.498794618016131 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 2 9.289606026785348 23.568837402972864 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 3 9.288364610877084 23.673617902615952 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 4 9.281952146707246 23.707803315596543 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 5 9.276974997441636 23.636329564954210 2009-Feb-28 23:08:32 LOG4 log_alfabeam: ALFABEAM 6 9.278442568496629 23.532123499570641 2009-Feb-28 23:08:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900244 2009-Feb-28 23:08:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:08:33 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Feb-28 23:08:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:08:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:08:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:08:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11314.00 2009-Feb-28 23:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:08:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-Feb-28 23:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:08:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:08:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:08:44 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Feb-28 23:08:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:08:44 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Feb-28 23:08:44 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Feb-28 23:08:44 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:08:44 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Feb-28 23:08:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:08:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:08:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:08:44 LOG2 antvel: Parameters to Doppler: Topocentric 97724 2009 59 0.0 2009-Feb-28 23:08:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:08:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Feb-28 23:08:44 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Feb-28 23:08:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:08:44 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:08:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:08:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Feb-28 23:08:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:08:44 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Feb-28 23:08:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:08:44 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.299361 2009.1641735746698 18.999933 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333548 23.603333333333339 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 1 9.284730999042750 23.498965929869268 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 2 9.289628731952616 23.569627334459788 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 3 9.288317620463376 23.674247386821111 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 4 9.281882653493421 23.707625353182987 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 5 9.276953331605842 23.635529129705183 2009-Feb-28 23:08:44 LOG4 log_alfabeam: ALFABEAM 6 9.278490122408707 23.531511830556948 2009-Feb-28 23:08:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900245 2009-Feb-28 23:08:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:08:45 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Feb-28 23:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-Feb-28 23:08:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:08:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:08:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:08:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11326.00 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:08:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:08:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:08:56 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Feb-28 23:08:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:08:56 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Feb-28 23:08:56 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Feb-28 23:08:56 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:08:56 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Feb-28 23:08:56 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:08:56 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:08:56 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:08:56 LOG2 antvel: Parameters to Doppler: Topocentric 97736 2009 59 0.0 2009-Feb-28 23:08:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:08:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Feb-28 23:08:56 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Feb-28 23:08:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:08:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:08:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:08:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Feb-28 23:08:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:08:56 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Feb-28 23:08:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:08:56 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.302703 2009.1641739549268 18.999933 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333466 23.603333333333335 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 1 9.284800279278903 23.499145847367693 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 2 9.289650900251932 23.570419636319873 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 3 9.288270237571862 23.674870575011791 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 4 9.281813328385585 23.707438790169235 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 5 9.276932216096473 23.634726581651197 2009-Feb-28 23:08:56 LOG4 log_alfabeam: ALFABEAM 6 9.278538044114290 23.530906583057526 2009-Feb-28 23:08:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900246 2009-Feb-28 23:08:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:08:57 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Feb-28 23:08:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:08:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:08:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:08:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:08:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11338.00 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:08:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:09:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:09:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:09:08 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Feb-28 23:09:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:09:08 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Feb-28 23:09:08 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Feb-28 23:09:08 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:09:08 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Feb-28 23:09:08 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:09:08 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:09:08 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:09:08 LOG2 antvel: Parameters to Doppler: Topocentric 97748 2009 59 0.0 2009-Feb-28 23:09:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:09:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Feb-28 23:09:08 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Feb-28 23:09:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:09:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:09:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:09:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Feb-28 23:09:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:09:08 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Feb-28 23:09:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:09:08 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.306046 2009.164174335184 18.999933 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333427 23.603333333333342 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 1 9.284869425414277 23.499334424512064 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 2 9.289672540124549 23.571214588980546 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 3 9.288222445757150 23.675487694904611 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 4 9.281744146487744 23.707243571797758 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 5 9.276911642567041 23.633921638876952 2009-Feb-28 23:09:08 LOG4 log_alfabeam: ALFABEAM 6 9.278586350151400 23.530307531221062 2009-Feb-28 23:09:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900247 2009-Feb-28 23:09:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:09:09 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Feb-28 23:09:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:09:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:09:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:09:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11350.00 2009-Feb-28 23:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:09:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:09:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.908 1.044 1.051 2009-Feb-28 23:09:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.963 1.079 1.099 2009-Feb-28 23:09:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.976 0.992 1.059 2009-Feb-28 23:09:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.108 1.023 0.117 2009-Feb-28 23:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:09:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:09:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:09:20 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Feb-28 23:09:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:09:20 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Feb-28 23:09:20 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Feb-28 23:09:20 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:09:20 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Feb-28 23:09:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:09:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16417 J 2009-Feb-28 23:09:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:09:20 LOG2 antvel: Parameters to Doppler: Topocentric 97760 2009 59 0.0 2009-Feb-28 23:09:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:09:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Feb-28 23:09:20 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Feb-28 23:09:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:09:20 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:09:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:09:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Feb-28 23:09:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:09:20 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Feb-28 23:09:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:09:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.309388 2009.164174715441 18.999933 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333445 23.603333333333342 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 1 9.284938379641597 23.499531488761395 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 2 9.289693634197747 23.572011521747317 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 3 9.288174285784505 23.676098236814664 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 4 9.281675165630157 23.707039877788862 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 5 9.276891627215033 23.633114982436119 2009-Feb-28 23:09:20 LOG4 log_alfabeam: ALFABEAM 6 9.278634999242758 23.529715164955459 2009-Feb-28 23:09:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900248 2009-Feb-28 23:09:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:09:21 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Feb-28 23:09:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:09:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:09:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:09:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11362.00 2009-Feb-28 23:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:09:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad) 2009-Feb-28 23:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad) 2009-Feb-28 23:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:09:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:09:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:09:32 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Feb-28 23:09:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:09:32 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Feb-28 23:09:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:09:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:09:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:09:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:09:32 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Feb-28 23:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad) 2009-Feb-28 23:09:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:09:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:09:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:09:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:09:32 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Feb-28 23:09:32 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Feb-28 23:09:32 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:09:32 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Feb-28 23:09:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:09:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:09:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:09:32 LOG2 antvel: Parameters to Doppler: Topocentric 97772 2009 59 0.0 2009-Feb-28 23:09:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:09:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Feb-28 23:09:32 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Feb-28 23:09:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:09:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:09:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:09:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Feb-28 23:09:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:09:32 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Feb-28 23:09:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:09:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.312731 2009.1641750956981 18.999933 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333303 23.603333333333342 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 1 9.285007166936081 23.499737092315844 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 2 9.289714191057200 23.572810715140555 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 3 9.288125741261414 23.676702430422701 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 4 9.281606360815562 23.706827655164624 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 5 9.276872161548994 23.632306330107458 2009-Feb-28 23:09:32 LOG4 log_alfabeam: ALFABEAM 6 9.278684007892664 23.529129256401106 2009-Feb-28 23:09:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900249 2009-Feb-28 23:09:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:09:33 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Feb-28 23:09:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:09:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:09:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:09:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11374.00 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:09:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.601 (still bad) 2009-Feb-28 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.594 (still bad) 2009-Feb-28 23:09:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.595 (still bad) 2009-Feb-28 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.601 (still bad) 2009-Feb-28 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.593 (still bad) 2009-Feb-28 23:09:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:09:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:09:44 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Feb-28 23:09:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:09:44 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Feb-28 23:09:44 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Feb-28 23:09:44 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:09:44 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Feb-28 23:09:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:09:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:09:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:09:44 LOG2 antvel: Parameters to Doppler: Topocentric 97784 2009 59 0.0 2009-Feb-28 23:09:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:09:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Feb-28 23:09:44 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Feb-28 23:09:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:09:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:09:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:09:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Feb-28 23:09:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:09:44 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Feb-28 23:09:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:09:44 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.316073 2009.1641754759551 18.999933 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333367 23.603333333333339 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 1 9.285075730034542 23.499951040581401 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 2 9.289734194765405 23.573611493731072 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 3 9.288076853890294 23.677299783611005 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 4 9.281537789301835 23.706607105644650 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 5 9.276853260293265 23.631496366823988 2009-Feb-28 23:09:44 LOG4 log_alfabeam: ALFABEAM 6 9.278733333965519 23.528550277613807 2009-Feb-28 23:09:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900250 2009-Feb-28 23:09:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:09:45 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Feb-28 23:09:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:09:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:09:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:09:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11386.00 2009-Feb-28 23:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.593 (still bad) 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:09:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.593 (still bad) 2009-Feb-28 23:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.589 (still bad) 2009-Feb-28 23:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.585 (still bad) 2009-Feb-28 23:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.587 (still bad) 2009-Feb-28 23:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.587 (still bad) 2009-Feb-28 23:09:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:09:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:09:56 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Feb-28 23:09:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:09:56 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Feb-28 23:09:56 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Feb-28 23:09:56 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:09:56 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Feb-28 23:09:56 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:09:56 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:09:56 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:09:56 LOG2 antvel: Parameters to Doppler: Topocentric 97796 2009 59 0.0 2009-Feb-28 23:09:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:09:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Feb-28 23:09:56 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Feb-28 23:09:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:09:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:09:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:09:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Feb-28 23:09:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:09:56 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Feb-28 23:09:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:09:56 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.319416 2009.1641758562121 18.999933 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333305 23.603333333333335 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 1 9.285144094043842 23.500173384203936 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 2 9.289753654051150 23.574414138624604 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 3 9.288027607298119 23.677890528289694 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 4 9.281469425952157 23.706378177771580 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 5 9.276834914807891 23.630684809553216 2009-Feb-28 23:09:56 LOG4 log_alfabeam: ALFABEAM 6 9.278782993964969 23.527977998497889 2009-Feb-28 23:09:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900251 2009-Feb-28 23:09:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:09:57 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Feb-28 23:09:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:09:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:09:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:09:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:09:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:09:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11398.00 2009-Feb-28 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.584 (still bad) 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.584 (still bad) 2009-Feb-28 23:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.581 (still bad) 2009-Feb-28 23:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.576 (still bad) 2009-Feb-28 23:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.580 (still bad) 2009-Feb-28 23:10:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:10:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:10:08 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Feb-28 23:10:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:10:08 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Feb-28 23:10:08 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Feb-28 23:10:08 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:10:08 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Feb-28 23:10:08 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:10:08 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:10:08 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:10:08 LOG2 antvel: Parameters to Doppler: Topocentric 97808 2009 59 0.0 2009-Feb-28 23:10:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:10:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Feb-28 23:10:08 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Feb-28 23:10:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:10:08 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:10:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:10:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Feb-28 23:10:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:10:08 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Feb-28 23:10:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:10:08 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.322758 2009.1641762364693 18.999933 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333367 23.603333333333328 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 1 9.285212202358041 23.500403907156386 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 2 9.289772554433567 23.575217971095249 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 3 9.287978044029442 23.678474190768188 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 4 9.281401327340243 23.706141094617049 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 5 9.276817138330372 23.629872345640848 2009-Feb-28 23:10:08 LOG4 log_alfabeam: ALFABEAM 6 9.278832944994027 23.527412872478862 2009-Feb-28 23:10:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900252 2009-Feb-28 23:10:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:10:09 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Feb-28 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.578 (still bad) 2009-Feb-28 23:10:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:10:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:10:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:10:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11410.00 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.578 (still bad) 2009-Feb-28 23:10:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:10:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.411 1.254 1.462 1.445 2009-Feb-28 23:10:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.436 1.351 1.544 1.528 2009-Feb-28 23:10:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.567 1.387 1.439 1.436 2009-Feb-28 23:10:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.338 0.108 1.475 0.118 2009-Feb-28 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.568 (still bad) 2009-Feb-28 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.568 (still bad) 2009-Feb-28 23:10:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad) 2009-Feb-28 23:10:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:10:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:10:20 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Feb-28 23:10:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:10:20 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Feb-28 23:10:20 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Feb-28 23:10:20 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:10:20 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Feb-28 23:10:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:10:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:10:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:10:20 LOG2 antvel: Parameters to Doppler: Topocentric 97820 2009 59 0.0 2009-Feb-28 23:10:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:10:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Feb-28 23:10:20 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Feb-28 23:10:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:10:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:10:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:10:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Feb-28 23:10:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:10:20 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Feb-28 23:10:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:10:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.326101 2009.1641766167263 18.999933 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333346 23.603333333333335 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 1 9.285280080250915 23.500642658837975 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 2 9.289790904785452 23.576023273327639 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 3 9.287928147695741 23.679051005389606 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 4 9.281333468155834 23.705895805924829 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 5 9.276799922075487 23.629058690741260 2009-Feb-28 23:10:20 LOG4 log_alfabeam: ALFABEAM 6 9.278883203591917 23.526854667059560 2009-Feb-28 23:10:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900253 2009-Feb-28 23:10:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:10:21 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Feb-28 23:10:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:10:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:10:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad) 2009-Feb-28 23:10:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:10:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11422.00 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:10:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.542 (still bad) 2009-Feb-28 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.538 (still bad) 2009-Feb-28 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.537 (still bad) 2009-Feb-28 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.541 (still bad) 2009-Feb-28 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.537 (still bad) 2009-Feb-28 23:10:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:10:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:10:32 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Feb-28 23:10:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:10:32 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Feb-28 23:10:32 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Feb-28 23:10:32 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:10:32 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Feb-28 23:10:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:10:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:10:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:10:32 LOG2 antvel: Parameters to Doppler: Topocentric 97832 2009 59 0.0 2009-Feb-28 23:10:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:10:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Feb-28 23:10:32 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Feb-28 23:10:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:10:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:10:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:10:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Feb-28 23:10:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:10:32 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Feb-28 23:10:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:10:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.329443 2009.1641769969833 18.999933 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333387 23.603333333333335 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 1 9.285347671881137 23.500889402521601 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 2 9.289808692093644 23.576829364739947 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 3 9.287877961584339 23.679620517637318 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 4 9.281265904180257 23.705642555358786 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 5 9.276783277787445 23.628244533149765 2009-Feb-28 23:10:32 LOG4 log_alfabeam: ALFABEAM 6 9.278933726199632 23.526303816370010 2009-Feb-28 23:10:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900254 2009-Feb-28 23:10:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:10:33 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Feb-28 23:10:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:10:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:10:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.536 (still bad) 2009-Feb-28 23:10:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11434.00 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.536 (still bad) 2009-Feb-28 23:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.531 (still bad) 2009-Feb-28 23:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.533 (still bad) 2009-Feb-28 23:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.537 (still bad) 2009-Feb-28 23:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.532 (still bad) 2009-Feb-28 23:10:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:10:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:10:44 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Feb-28 23:10:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:10:44 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Feb-28 23:10:44 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Feb-28 23:10:44 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:10:44 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Feb-28 23:10:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:10:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:10:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:10:44 LOG2 antvel: Parameters to Doppler: Topocentric 97844 2009 59 0.0 2009-Feb-28 23:10:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:10:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Feb-28 23:10:44 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Feb-28 23:10:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:10:44 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:10:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:10:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Feb-28 23:10:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:10:44 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Feb-28 23:10:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:10:44 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.332785 2009.1641773772403 18.999933 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333378 23.603333333333342 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 1 9.285414982623818 23.501144109327626 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 2 9.289825920298064 23.577636287528328 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 3 9.287827484399461 23.680182797272124 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 4 9.281198629983773 23.705381372817538 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 5 9.276767201268138 23.627429830555826 2009-Feb-28 23:10:44 LOG4 log_alfabeam: ALFABEAM 6 9.278984514193343 23.525760246959756 2009-Feb-28 23:10:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900255 2009-Feb-28 23:10:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:10:45 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Feb-28 23:10:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:10:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:10:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:10:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11446.00 2009-Feb-28 23:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.535 (still bad) 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:10:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.533 (still bad) 2009-Feb-28 23:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.527 (still bad) 2009-Feb-28 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.528 (still bad) 2009-Feb-28 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.533 (still bad) 2009-Feb-28 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.527 (still bad) 2009-Feb-28 23:10:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:10:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:10:56 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Feb-28 23:10:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:10:56 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Feb-28 23:10:56 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Feb-28 23:10:56 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Feb-28 23:10:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:10:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:10:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:10:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:10:56 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Feb-28 23:10:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:10:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:10:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:10:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:10:56 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Feb-28 23:10:56 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Feb-28 23:10:56 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Feb-28 23:10:56 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:10:56 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Feb-28 23:10:56 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:10:56 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:10:56 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:10:56 LOG2 antvel: Parameters to Doppler: Topocentric 97856 2009 59 0.0 2009-Feb-28 23:10:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:10:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Feb-28 23:10:56 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Feb-28 23:10:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:10:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:10:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:10:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Feb-28 23:10:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:10:56 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Feb-28 23:10:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:10:56 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.336128 2009.1641777574973 18.999933 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333353 23.603333333333342 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 1 9.285482017796443 23.501406754852542 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 2 9.289842593070315 23.578444085346668 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 3 9.287776714631020 23.680737911042897 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 4 9.281131640198550 23.705112283710161 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 5 9.276751688594777 23.626614539243249 2009-Feb-28 23:10:56 LOG4 log_alfabeam: ALFABEAM 6 9.279035569158905 23.525223888467824 2009-Feb-28 23:10:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900256 2009-Feb-28 23:10:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:10:57 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Feb-28 23:10:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:10:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:10:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:10:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Feb-28 23:10:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11458.00 2009-Feb-28 23:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.527 (still bad) 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:10:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.142 (still bad) 2009-Feb-28 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad) 2009-Feb-28 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.136 (still bad) 2009-Feb-28 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.139 (still bad) 2009-Feb-28 23:11:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:11:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:11:08 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Feb-28 23:11:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:11:08 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Feb-28 23:11:08 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Feb-28 23:11:08 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:11:08 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Feb-28 23:11:08 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:11:08 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:11:08 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:11:08 LOG2 antvel: Parameters to Doppler: Topocentric 97868 2009 59 0.0 2009-Feb-28 23:11:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:11:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Feb-28 23:11:08 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Feb-28 23:11:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:11:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:11:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:11:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Feb-28 23:11:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:11:08 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Feb-28 23:11:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:11:08 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.339470 2009.1641781377546 18.999933 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333367 23.603333333333342 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 1 9.285548722893756 23.501677072921030 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 2 9.289858699602194 23.579252077504798 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 3 9.287725696488749 23.681285434334409 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 4 9.281064989228218 23.704835560940133 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 5 9.276736749278760 23.625799346230444 2009-Feb-28 23:11:08 LOG4 log_alfabeam: ALFABEAM 6 9.279086846734428 23.524695145092874 2009-Feb-28 23:11:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900257 2009-Feb-28 23:11:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:11:09 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Feb-28 23:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad) 2009-Feb-28 23:11:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:11:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:11:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Feb-28 23:11:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11470.00 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad) 2009-Feb-28 23:11:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-Feb-28 23:11:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:11:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.923 1.072 1.060 2009-Feb-28 23:11:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.976 1.121 1.114 2009-Feb-28 23:11:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.989 1.041 1.081 2009-Feb-28 23:11:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.108 1.039 0.118 2009-Feb-28 23:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-Feb-28 23:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-Feb-28 23:11:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:11:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:11:20 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Feb-28 23:11:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:11:20 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Feb-28 23:11:20 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Feb-28 23:11:20 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:11:20 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Feb-28 23:11:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:11:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:11:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:11:20 LOG2 antvel: Parameters to Doppler: Topocentric 97880 2009 59 0.0 2009-Feb-28 23:11:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:11:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Feb-28 23:11:20 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Feb-28 23:11:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:11:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:11:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:11:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Feb-28 23:11:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:11:20 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Feb-28 23:11:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:11:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.342813 2009.1641785180116 18.999933 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333367 23.603333333333339 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 1 9.285615123736477 23.501955111509854 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 2 9.289874249094154 23.580060550975464 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 3 9.287674413380277 23.681825608032586 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 4 9.280998651202903 23.704551155513279 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 5 9.276722374212639 23.624983961789798 2009-Feb-28 23:11:20 LOG4 log_alfabeam: ALFABEAM 6 9.279138363709883 23.524173778036040 2009-Feb-28 23:11:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900258 2009-Feb-28 23:11:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:11:21 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Feb-28 23:11:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:11:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:11:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-Feb-28 23:11:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Feb-28 23:11:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11482.00 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:11:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-Feb-28 23:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-Feb-28 23:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Feb-28 23:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:11:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:11:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:11:32 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Feb-28 23:11:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:11:32 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Feb-28 23:11:32 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Feb-28 23:11:32 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:11:32 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Feb-28 23:11:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:11:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:11:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:11:32 LOG2 antvel: Parameters to Doppler: Topocentric 97892 2009 59 0.0 2009-Feb-28 23:11:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:11:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Feb-28 23:11:32 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Feb-28 23:11:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:11:32 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:11:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:11:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Feb-28 23:11:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:11:32 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Feb-28 23:11:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:11:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.346155 2009.1641788982686 18.999933 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333358 23.603333333333339 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 1 9.285681166827436 23.502240586011474 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 2 9.289889232198128 23.580868826741920 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 3 9.287622910000570 23.682358028041634 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 4 9.280932679493235 23.704259358597298 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 5 9.276708571436322 23.624169070335682 2009-Feb-28 23:11:32 LOG4 log_alfabeam: ALFABEAM 6 9.279190075317244 23.523660171055528 2009-Feb-28 23:11:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900259 2009-Feb-28 23:11:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:11:33 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Feb-28 23:11:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:11:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:11:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Feb-28 23:11:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11494.00 2009-Feb-28 23:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:11:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:11:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:11:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:11:44 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Feb-28 23:11:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:11:44 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Feb-28 23:11:44 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Feb-28 23:11:44 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:11:44 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Feb-28 23:11:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:11:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:11:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:11:44 LOG2 antvel: Parameters to Doppler: Topocentric 97904 2009 59 0.0 2009-Feb-28 23:11:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:11:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Feb-28 23:11:44 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Feb-28 23:11:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:11:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:11:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:11:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Feb-28 23:11:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:11:44 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Feb-28 23:11:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:11:44 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.349498 2009.1641792785256 18.999933 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333378 23.603333333333339 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 1 9.285746878246250 23.502533544625194 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 2 9.289903658222944 23.581677194472189 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 3 9.287571169609659 23.682882937872353 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 4 9.280867047965618 23.703960120895307 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 5 9.276695331740912 23.623354379215211 2009-Feb-28 23:11:44 LOG4 log_alfabeam: ALFABEAM 6 9.279241998511012 23.523154082884844 2009-Feb-28 23:11:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900260 2009-Feb-28 23:11:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:11:45 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Feb-28 23:11:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:11:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:11:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Feb-28 23:11:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11506.00 2009-Feb-28 23:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:11:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:11:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:11:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:11:56 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Feb-28 23:11:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:11:56 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Feb-28 23:11:56 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Feb-28 23:11:56 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:11:56 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Feb-28 23:11:56 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:11:56 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:11:56 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:11:56 LOG2 antvel: Parameters to Doppler: Topocentric 97916 2009 59 0.0 2009-Feb-28 23:11:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:11:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Feb-28 23:11:56 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Feb-28 23:11:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:11:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:11:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:11:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Feb-28 23:11:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:11:56 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Feb-28 23:11:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:11:56 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.352840 2009.1641796587826 18.999933 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333355 23.603333333333342 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 1 9.285812205588016 23.502833685364646 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 2 9.289917519263103 23.582484978173959 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 3 9.287519237283091 23.683399954273259 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 4 9.280801808873804 23.703653750765120 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 5 9.276682661716768 23.622540568890347 2009-Feb-28 23:11:56 LOG4 log_alfabeam: ALFABEAM 6 9.279294088219423 23.522655876593131 2009-Feb-28 23:11:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900261 2009-Feb-28 23:11:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:11:57 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Feb-28 23:11:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:11:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:11:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:11:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:11:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Feb-28 23:11:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11518.00 2009-Feb-28 23:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:11:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:12:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:12:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:12:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:12:08 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Feb-28 23:12:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:12:08 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Feb-28 23:12:08 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Feb-28 23:12:08 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:12:08 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Feb-28 23:12:08 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:12:08 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:12:08 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:12:08 LOG2 antvel: Parameters to Doppler: Topocentric 97928 2009 59 0.0 2009-Feb-28 23:12:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:12:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Feb-28 23:12:08 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Feb-28 23:12:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:12:08 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Feb-28 23:12:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:12:08 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Feb-28 23:12:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:12:08 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.356183 2009.1641800390398 18.999933 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333347 23.603333333333335 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 1 9.285877175207657 23.503141057152742 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 2 9.289930824716560 23.583292470608804 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 3 9.287467096096535 23.683909323284308 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 4 9.280736935805519 23.703340198098665 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 5 9.276670552075185 23.621727343395062 2009-Feb-28 23:12:08 LOG4 log_alfabeam: ALFABEAM 6 9.279346361597131 23.522165308573133 2009-Feb-28 23:12:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900262 2009-Feb-28 23:12:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:12:09 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Feb-28 23:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:12:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:12:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:12:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Feb-28 23:12:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11530.00 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:12:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad) 2009-Feb-28 23:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad) 2009-Feb-28 23:12:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:12:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.906 1.038 1.042 2009-Feb-28 23:12:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.960 1.072 1.092 2009-Feb-28 23:12:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.969 0.984 1.052 2009-Feb-28 23:12:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.023 0.117 2009-Feb-28 23:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-Feb-28 23:12:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:12:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:12:20 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Feb-28 23:12:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:12:20 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Feb-28 23:12:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:12:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:12:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:12:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:12:20 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Feb-28 23:12:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:12:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:12:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:12:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:12:20 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Feb-28 23:12:20 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Feb-28 23:12:20 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:12:20 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Feb-28 23:12:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:12:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:12:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:12:20 LOG2 antvel: Parameters to Doppler: Topocentric 97940 2009 59 0.0 2009-Feb-28 23:12:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:12:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Feb-28 23:12:20 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Feb-28 23:12:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:12:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:12:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:12:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Feb-28 23:12:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:12:20 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Feb-28 23:12:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:12:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.359525 2009.1641804192968 18.999933 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333333 23.603333333333335 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 1 9.285941735868851 23.503455341743173 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 2 9.289943568096376 23.584099000108274 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 3 9.287414791402391 23.684410682701891 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 4 9.280672479822490 23.703019787305916 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 5 9.276659007986661 23.620915377948492 2009-Feb-28 23:12:20 LOG4 log_alfabeam: ALFABEAM 6 9.279398773370289 23.521682721074086 2009-Feb-28 23:12:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900263 2009-Feb-28 23:12:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:12:21 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Feb-28 23:12:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Feb-28 23:12:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:12:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.090 (still bad) 2009-Feb-28 23:12:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Feb-28 23:12:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11542.00 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:12:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.595 (still bad) 2009-Feb-28 23:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.592 (still bad) 2009-Feb-28 23:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.591 (still bad) 2009-Feb-28 23:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.595 (still bad) 2009-Feb-28 23:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.593 (still bad) 2009-Feb-28 23:12:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:12:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:12:32 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Feb-28 23:12:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:12:32 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Feb-28 23:12:32 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Feb-28 23:12:32 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:12:32 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Feb-28 23:12:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:12:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:12:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:12:32 LOG2 antvel: Parameters to Doppler: Topocentric 97952 2009 59 0.0 2009-Feb-28 23:12:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:12:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Feb-28 23:12:32 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Feb-28 23:12:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:12:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:12:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:12:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Feb-28 23:12:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:12:32 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Feb-28 23:12:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:12:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.362868 2009.1641807995538 18.999933 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333358 23.603333333333342 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 1 9.286005914213142 23.503776589304852 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 2 9.289955758866995 23.584904862885576 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 3 9.287362306056282 23.684904280935843 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 4 9.280608414223074 23.702692466939769 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 5 9.276648020107292 23.620104372927575 2009-Feb-28 23:12:32 LOG4 log_alfabeam: ALFABEAM 6 9.279451340927084 23.521207868335839 2009-Feb-28 23:12:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900264 2009-Feb-28 23:12:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:12:33 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Feb-28 23:12:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:12:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Feb-28 23:12:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Feb-28 23:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.590 (still bad) 2009-Feb-28 23:12:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11554.00 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:12:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.588 (still bad) 2009-Feb-28 23:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.588 (still bad) 2009-Feb-28 23:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.582 (still bad) 2009-Feb-28 23:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.586 (still bad) 2009-Feb-28 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.583 (still bad) 2009-Feb-28 23:12:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:12:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:12:44 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Feb-28 23:12:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:12:44 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Feb-28 23:12:44 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Feb-28 23:12:44 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:12:44 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Feb-28 23:12:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:12:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:12:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:12:44 LOG2 antvel: Parameters to Doppler: Topocentric 97964 2009 59 0.0 2009-Feb-28 23:12:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:12:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Feb-28 23:12:44 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Feb-28 23:12:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:12:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:12:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:12:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Feb-28 23:12:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:12:44 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Feb-28 23:12:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:12:44 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.366210 2009.1641811798108 18.999933 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333404 23.603333333333349 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 1 9.286069660240695 23.504104466503598 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 2 9.289967391928787 23.585709392834314 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 3 9.287309685585596 23.685389776915159 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 4 9.280544788810657 23.702358576273227 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 5 9.276637592224127 23.619294997085539 2009-Feb-28 23:12:44 LOG4 log_alfabeam: ALFABEAM 6 9.279504018891283 23.520741071771027 2009-Feb-28 23:12:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900265 2009-Feb-28 23:12:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:12:45 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Feb-28 23:12:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:12:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Feb-28 23:12:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Feb-28 23:12:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11566.00 2009-Feb-28 23:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.582 (still bad) 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:12:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.582 (still bad) 2009-Feb-28 23:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.583 (still bad) 2009-Feb-28 23:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.577 (still bad) 2009-Feb-28 23:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.581 (still bad) 2009-Feb-28 23:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.574 (still bad) 2009-Feb-28 23:12:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:12:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:12:56 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Feb-28 23:12:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:12:56 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Feb-28 23:12:56 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Feb-28 23:12:56 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:12:56 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Feb-28 23:12:56 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:12:56 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:12:56 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:12:56 LOG2 antvel: Parameters to Doppler: Topocentric 97976 2009 59 0.0 2009-Feb-28 23:12:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:12:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Feb-28 23:12:56 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Feb-28 23:12:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:12:56 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:12:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:12:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Feb-28 23:12:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:12:56 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Feb-28 23:12:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:12:56 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.369553 2009.1641815600681 18.999933 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333353 23.603333333333339 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 1 9.286133000885444 23.504439025288853 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 2 9.289978476786905 23.586512889931949 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 3 9.287256912592486 23.685867421199635 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 4 9.280481576588832 23.702018061981232 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 5 9.276627714965462 23.618486946847135 2009-Feb-28 23:12:56 LOG4 log_alfabeam: ALFABEAM 6 9.279556824915838 23.520282083711539 2009-Feb-28 23:12:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900266 2009-Feb-28 23:12:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:12:57 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Feb-28 23:12:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:12:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Feb-28 23:12:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:12:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Feb-28 23:12:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11578.00 2009-Feb-28 23:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.577 (still bad) 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad) 2009-Feb-28 23:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.560 (still bad) 2009-Feb-28 23:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad) 2009-Feb-28 23:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad) 2009-Feb-28 23:13:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.561 (still bad) 2009-Feb-28 23:13:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:13:08 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Feb-28 23:13:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:13:08 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Feb-28 23:13:08 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Feb-28 23:13:08 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:13:08 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Feb-28 23:13:08 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:13:08 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:13:08 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:13:08 LOG2 antvel: Parameters to Doppler: Topocentric 97988 2009 59 0.0 2009-Feb-28 23:13:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:13:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Feb-28 23:13:08 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Feb-28 23:13:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:13:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:13:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:13:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Feb-28 23:13:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:13:08 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Feb-28 23:13:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:13:08 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.372895 2009.1641819403251 18.999933 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333397 23.603333333333342 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 1 9.286195887443579 23.504779918451330 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 2 9.289989009691940 23.587314694802757 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 3 9.287204032679522 23.686336893821775 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 4 9.280418826044952 23.701671276972739 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 5 9.276618390777189 23.617680883352421 2009-Feb-28 23:13:08 LOG4 log_alfabeam: ALFABEAM 6 9.279609713618816 23.519831204826485 2009-Feb-28 23:13:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900267 2009-Feb-28 23:13:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:13:09 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Feb-28 23:13:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:13:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Feb-28 23:13:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Feb-28 23:13:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11590.00 2009-Feb-28 23:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.561 (still bad) 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.535 (still bad) 2009-Feb-28 23:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.534 (still bad) 2009-Feb-28 23:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.534 (still bad) 2009-Feb-28 23:13:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:13:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.389 1.246 1.433 1.440 2009-Feb-28 23:13:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.429 1.344 1.513 1.516 2009-Feb-28 23:13:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.530 1.373 1.399 1.420 2009-Feb-28 23:13:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.325 0.108 1.458 0.118 2009-Feb-28 23:13:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:13:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:13:20 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Feb-28 23:13:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:13:20 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Feb-28 23:13:20 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Feb-28 23:13:20 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:13:20 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Feb-28 23:13:20 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:13:20 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:13:20 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:13:20 LOG2 antvel: Parameters to Doppler: Topocentric 98000 2009 59 0.0 2009-Feb-28 23:13:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:13:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Feb-28 23:13:20 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Feb-28 23:13:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:13:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:13:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:13:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Feb-28 23:13:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:13:20 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Feb-28 23:13:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:13:20 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.376237 2009.1641823205821 18.999933 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333356 23.603333333333328 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 1 9.286258328526440 23.505127095451073 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 2 9.289998997254331 23.588114872281423 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 3 9.287151044034736 23.686798310357233 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 4 9.280356528459826 23.701318272045860 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 5 9.276609612835312 23.616876739144853 2009-Feb-28 23:13:20 LOG4 log_alfabeam: ALFABEAM 6 9.279662687084761 23.519388317161436 2009-Feb-28 23:13:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900268 2009-Feb-28 23:13:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:13:21 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Feb-28 23:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.532 (still bad) 2009-Feb-28 23:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:13:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Feb-28 23:13:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Feb-28 23:13:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11602.00 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.532 (still bad) 2009-Feb-28 23:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.533 (still bad) 2009-Feb-28 23:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.527 (still bad) 2009-Feb-28 23:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.526 (still bad) 2009-Feb-28 23:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.528 (still bad) 2009-Feb-28 23:13:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:13:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:13:32 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Feb-28 23:13:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:13:32 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Feb-28 23:13:32 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Feb-28 23:13:32 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:13:32 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Feb-28 23:13:32 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:13:32 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:13:32 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:13:32 LOG2 antvel: Parameters to Doppler: Topocentric 98012 2009 59 0.0 2009-Feb-28 23:13:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:13:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Feb-28 23:13:32 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Feb-28 23:13:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:13:32 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:13:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:13:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Feb-28 23:13:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Feb-28 23:13:32 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Feb-28 23:13:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:13:32 LOG5 log_alfabeam: Parameters: 9.2833333333333332 23.603333333333335 9.379580 2009.1641827008391 18.999933 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 0 9.283333333333342 23.603333333333335 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 1 9.286320332624411 23.505480510869184 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 2 9.290008445753116 23.588913488324245 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 3 9.287097944628421 23.687251782377484 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 4 9.280294675239793 23.700959092865368 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 5 9.276601374656300 23.616074445746062 2009-Feb-28 23:13:32 LOG4 log_alfabeam: ALFABEAM 6 9.279715747605389 23.518953306866035 2009-Feb-28 23:13:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 905900269 2009-Feb-28 23:13:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Feb-28 23:13:33 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Feb-28 23:13:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:13:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Feb-28 23:13:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.524 (still bad) 2009-Feb-28 23:13:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Feb-28 23:13:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11614.00 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:13:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.524 (still bad) 2009-Feb-28 23:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.522 (still bad) 2009-Feb-28 23:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.522 (still bad) 2009-Feb-28 23:13:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.521 (still bad) 2009-Feb-28 23:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.522 (still bad) 2009-Feb-28 23:13:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:13:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Feb-28 23:13:44 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Feb-28 23:13:44 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 INFO2 smartfreq: Switching off CAL 2009-Feb-28 23:13:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:13:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:13:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:13:44 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:13:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:13:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:13:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:13:44 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 INFO3 restore_frequencies: Restoring original frequencies 2009-Feb-28 23:13:44 LOG5 antvel: Calling 'antvel 91700.000000 233612.000000 J Topocentric 0' 2009-Feb-28 23:13:44 LOG2 antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:13:44 LOG2 antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:13:44 LOG2 antvel: Parameters to Doppler: Topocentric 98024 2009 59 0.0 2009-Feb-28 23:13:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:13:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Feb-28 23:13:44 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Feb-28 23:13:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:13:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:13:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:13:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:44 STOP finish_task: Finishing task 'smart frequency switching' 2009-Feb-28 23:13:44 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Feb-28 23:13:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:13:44 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Feb-28 23:13:44 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-28 23:13:44 NOTE run_command_file: DONE with command file processing 2009-Feb-28 23:13:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Feb-28 23:13:45 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Feb-28 23:13:45 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Feb-28 23:13:45 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Feb-28 23:13:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:13:45 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Feb-28 23:13:45 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Feb-28 23:13:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:13:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:13:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.521 (still bad) 2009-Feb-28 23:13:53 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Feb-28 23:13:53 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Feb-28 23:13:53 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Feb-28 23:13:53 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Feb-28 23:13:53 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Feb-28 23:13:53 NOTE restart_wapp: Restarting all WAPPs 2009-Feb-28 23:13:53 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Feb-28 23:13:53 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Feb-28 23:13:53 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Feb-28 23:13:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Feb-28 23:13:53 LOG3 exec_msg: Closing socket 2009-Feb-28 23:13:53 LOG3 exec_msg: Closing socket 2009-Feb-28 23:13:53 LOG3 exec_msg: Closing socket 2009-Feb-28 23:13:53 LOG3 exec_msg: Closing socket 2009-Feb-28 23:13:56 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Feb-28 23:13:56 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Feb-28 23:13:56 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Feb-28 23:13:56 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Feb-28 23:14:08 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Feb-28 23:14:09 LOG2 CIMA-antvel: Precessing RA = 09:17:00.0 Dec = +23:36:12.0 Epoch = 2009.16418 J 2009-Feb-28 23:14:09 LOG2 CIMA-antvel: Computed apparent RA = 09:17:34.1 Dec = +23:33:47.9 2009-Feb-28 23:14:09 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 98048 2009 59 0.0 2009-Feb-28 23:14:09 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Feb-28 23:14:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-28 23:14:10 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Feb-28 23:14:10 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Feb-28 23:14:10 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Feb-28 23:14:10 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Feb-28 23:14:10 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Feb-28 23:14:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Feb-28 23:14:10 LOG1 config_iflo: Receiver ALFA already selected 2009-Feb-28 23:14:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:14:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:14:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:14:11 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:14:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:14:11 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:14:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:14:11 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Feb-28 23:14:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Feb-28 23:14:11 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Feb-28 23:14:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Feb-28 23:14:11 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Feb-28 23:14:11 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Feb-28 23:14:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Feb-28 23:14:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:11 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Feb-28 23:14:11 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Feb-28 23:14:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Feb-28 23:14:11 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Feb-28 23:14:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Feb-28 23:14:11 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 DONE finish_task: DONE finished configuration: IF/LO path 2009-Feb-28 23:14:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:14:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Feb-28 23:14:11 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Feb-28 23:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-28 23:14:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Feb-28 23:14:12 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Feb-28 23:14:12 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Feb-28 23:14:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Feb-28 23:14:12 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Feb-28 23:14:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Feb-28 23:14:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Feb-28 23:14:12 START begin_task: Starting task 'selecting calibration port' 2009-Feb-28 23:14:12 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG3 vw_send: To DATATAKING: calport 3 2009-Feb-28 23:14:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Feb-28 23:14:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:12 START begin_task: Starting task 'waiting on calport' 2009-Feb-28 23:14:12 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Feb-28 23:14:12 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Feb-28 23:14:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:14:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Feb-28 23:14:12 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Feb-28 23:14:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Feb-28 23:14:12 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:14:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:14:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:14:12 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:14:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:14:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:14:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:14:12 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:14:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:14:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:14:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Feb-28 23:14:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Feb-28 23:14:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:14:13 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Feb-28 23:14:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Feb-28 23:14:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:14:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:14:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:14:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:14:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:14:13 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Feb-28 23:14:13 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Feb-28 23:14:13 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Feb-28 23:14:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:14:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Feb-28 23:14:13 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Feb-28 23:14:13 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Feb-28 23:14:13 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Feb-28 23:14:13 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:14:13 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Feb-28 23:14:13 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Feb-28 23:14:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Feb-28 23:14:13 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:14:13 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Feb-28 23:14:13 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Feb-28 23:14:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:14:13 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Feb-28 23:14:13 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Feb-28 23:14:14 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Feb-28 23:14:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Feb-28 23:14:14 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Feb-28 23:14:35 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Feb-28 23:14:35 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Feb-28 23:14:35 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:14:35 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Feb-28 23:14:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Feb-28 23:14:35 INFO2 adjust_power: Starting to adjust WAPP power 2009-Feb-28 23:14:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Feb-28 23:14:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Feb-28 23:14:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:35 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Feb-28 23:14:35 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Feb-28 23:14:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Feb-28 23:14:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:14:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Feb-28 23:14:39 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Feb-28 23:14:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Feb-28 23:14:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:14:39 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Feb-28 23:14:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Feb-28 23:14:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:14:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:14:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:14:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:14:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Feb-28 23:14:39 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Feb-28 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Feb-28 23:14:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Feb-28 23:14:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Feb-28 23:14:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Feb-28 23:14:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Feb-28 23:14:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Feb-28 23:14:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Feb-28 23:14:40 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Feb-28 23:14:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.992 0.909 ALFA beam 1: 1.044 1.051 2009-Feb-28 23:14:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.020 0.963 ALFA beam 3: 1.066 1.077 2009-Feb-28 23:14:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 0.951 ALFA beam 5: 0.996 1.057 2009-Feb-28 23:14:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.914 0.105 ALFA beam 7: 1.012 0.115 2009-Feb-28 23:14:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:14:40 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Feb-28 23:14:40 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Feb-28 23:14:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:14:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:14:40 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Feb-28 23:14:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Feb-28 23:14:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:14:40 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Feb-28 23:14:40 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Feb-28 23:14:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-28 23:14:40 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:14:40 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Feb-28 23:14:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Feb-28 23:14:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.909 1.044 1.051 2009-Feb-28 23:14:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.963 1.066 1.077 2009-Feb-28 23:14:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.951 0.996 1.057 2009-Feb-28 23:14:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.105 1.012 0.115 2009-Feb-28 23:14:46 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Feb-28 23:14:46 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift97p2 092500.0 +233612 J 0 Topocentric velocity(optical) 2009-Feb-28 23:14:46 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift97p2 092500.0 +233612 J 0 Topocentric velocity(optical)' 2009-Feb-28 23:14:46 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Feb-28 23:14:46 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Feb-28 23:14:46 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Feb-28 23:14:46 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Feb-28 23:14:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift97p2} 2009-Feb-28 23:14:46 INFO5 fixed_driftmap: Start: year = 2009.1641850457577 RA = 09:25:34.0 Dec = +23:33:43.3 2009-Feb-28 23:14:46 NOTE fixed_driftmap: Setting ZA to 5:12:29.6 ... 2009-Feb-28 23:14:46 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 5.21 2009-Feb-28 23:14:46 LOG3 track_source: Calling 'track_source drift97p2 180.0 5.2082173428 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Feb-28 23:14:46 START begin_task: Starting task 'sending tracking commands' 2009-Feb-28 23:14:46 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Feb-28 23:14:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift97p2} INFO {Slewing to source 'drift97p2' ...} 2009-Feb-28 23:14:46 INFO1 track_source: Starting to track drift97p2 2009-Feb-28 23:14:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift97p2" 2009-Feb-28 23:14:46 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Feb-28 23:14:46 LOG3 vw_send: To DATATAKING: set dec 5.2082173428 2009-Feb-28 23:14:47 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Feb-28 23:14:47 LOG3 vw_send: To DATATAKING: pnt tr 180.0 5.2082173428 -CF 2009-Feb-28 23:14:47 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Feb-28 23:14:47 STOP finish_task: Finishing task 'sending tracking commands' 2009-Feb-28 23:14:47 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Feb-28 23:14:47 INFO2 finish_task: DONE finished sending: tracking commands 2009-Feb-28 23:14:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:14:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Feb-28 23:14:47 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Feb-28 23:14:47 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:14:47 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Feb-28 23:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Feb-28 23:14:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Feb-28 23:14:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Feb-28 23:14:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Feb-28 23:14:47 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Feb-28 23:14:47 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift97p2" 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: set dec 5.2082173428 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: vw% 5.2082173428 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 5.2082173428 -CF 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Feb-28 23:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:14:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Feb-28 23:14:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Feb-28 23:14:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Feb-28 23:14:48 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Feb-28 23:14:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Feb-28 23:14:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Feb-28 23:14:48 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Feb-28 23:14:48 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Feb-28 23:14:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:14:48 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Feb-28 23:14:48 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Feb-28 23:14:48 START begin_task: Starting task 'waiting on telescope' 2009-Feb-28 23:14:48 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Feb-28 23:14:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Feb-28 23:14:48 LOG3 waittrk: Start waittrk 5 2009-Feb-28 23:14:48 START begin_task: Starting task 'waiting on telescope movement' 2009-Feb-28 23:14:48 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Feb-28 23:14:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Feb-28 23:14:53 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Feb-28 23:14:53 START begin_task: Starting task 'waiting on telescope on source' 2009-Feb-28 23:14:53 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Feb-28 23:15:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Feb-28 23:15:38 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Feb-28 23:15:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Feb-28 23:15:38 INFO2 waittrk: Now tracking drift97p2 2009-Feb-28 23:15:38 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 5.23 2009-Feb-28 23:15:38 STOP finish_task: Finishing task 'waiting on telescope' 2009-Feb-28 23:15:38 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Feb-28 23:15:38 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Feb-28 23:15:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:15:38 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Feb-28 23:15:38 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Feb-28 23:15:38 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:15:38 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Feb-28 23:15:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:15:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:15:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:15:38 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:15:38 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:15:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:15:39 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:15:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:15:39 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:15:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:15:39 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:15:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:15:39 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:15:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:15:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:15:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:15:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:15:39 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:15:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:15:39 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:15:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:15:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:15:39 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG5 dopset_later: Calling 'dopset_later 40.006148705797145' 2009-Feb-28 23:15:39 INFO3 dopset_later: Setting Doppler correction for 23:16:19 (40 seconds from now) 2009-Feb-28 23:15:39 LOG5 antvel: Calling 'antvel 180.000000 5.208217 F Topocentric 40.006148705797145' 2009-Feb-28 23:15:39 LOG2 antvel: Transforming current Az = 180.00 ZA = 5.21 to apparent RA = 09:25:33.8 Dec = +23:33:43.3 2009-Feb-28 23:15:39 LOG2 antvel: Parameters to Doppler: Topocentric 98179 2009 59 0.0 2009-Feb-28 23:15:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-28 23:15:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Feb-28 23:15:39 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Feb-28 23:15:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-28 23:15:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-28 23:15:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:15:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:15:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:15:39 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Feb-28 23:15:39 INFO2 adjust_power: Starting to adjust WAPP power 2009-Feb-28 23:15:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Feb-28 23:15:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Feb-28 23:15:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:15:39 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Feb-28 23:15:39 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:15:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Feb-28 23:15:42 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Feb-28 23:15:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Feb-28 23:15:42 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-28 23:15:42 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Feb-28 23:15:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Feb-28 23:15:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:15:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:15:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:15:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-28 23:15:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Feb-28 23:15:42 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Feb-28 23:15:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Feb-28 23:15:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:15:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Feb-28 23:15:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 5 4 dB 2009-Feb-28 23:15:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Feb-28 23:15:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Feb-28 23:15:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Feb-28 23:15:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Feb-28 23:15:43 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Feb-28 23:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.994 0.904 ALFA beam 1: 1.048 1.050 2009-Feb-28 23:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.018 0.962 ALFA beam 3: 1.086 1.098 2009-Feb-28 23:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.086 0.969 ALFA beam 5: 0.999 1.061 2009-Feb-28 23:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.928 0.108 ALFA beam 7: 1.024 0.117 2009-Feb-28 23:15:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:15:43 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Feb-28 23:15:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Feb-28 23:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:15:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:15:43 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Feb-28 23:15:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:15:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-28 23:15:43 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Feb-28 23:15:43 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Feb-28 23:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:15:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-28 23:15:43 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Feb-28 23:15:43 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:25:34.0 LST = 09:24:56.8 diff = 37.1 secs 2009-Feb-28 23:15:43 INFO2 fixed_driftmap: Waiting 35.1 seconds for RA 9:25:34 2009-Feb-28 23:15:43 INFO2 lstwait: Waiting for 35 secs from LST 09:24:57 to LST 09:25:32 ... 2009-Feb-28 23:15:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 35.010226917638221 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Feb-28 23:15:43 START begin_task: Starting task 'waiting on wait on LST' 2009-Feb-28 23:15:43 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Feb-28 23:15:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:15:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.904 1.048 1.050 2009-Feb-28 23:15:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.962 1.086 1.098 2009-Feb-28 23:15:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.969 0.999 1.061 2009-Feb-28 23:15:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.024 0.117 2009-Feb-28 23:16:18 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Feb-28 23:16:18 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Feb-28 23:16:18 LOG4 lstwait: Finished waiting 0.99 seconds late 2009-Feb-28 23:16:18 INFO3 lstwait: Finished waiting 2009-Feb-28 23:16:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Feb-28 23:16:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:16:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:16:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:16:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:16:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Feb-28 23:16:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Feb-28 23:16:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-28 23:16:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-28 23:16:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:16:18 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Feb-28 23:16:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-28 23:16:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:16:18 INFO2 take_data: Starting WAPP 600-second scan: 905900270 2009-Feb-28 23:16:19 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:16:19 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Feb-28 23:16:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:16:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:16:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0001.fits 2009-Feb-28 23:16:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090228.a2010.0001.fits} 2009-Feb-28 23:16:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-28 23:16:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11780.00 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:16:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:16:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:16:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:16:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.907 1.049 1.054 2009-Feb-28 23:16:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.964 1.094 1.104 2009-Feb-28 23:16:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.973 1.002 1.060 2009-Feb-28 23:16:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.108 1.027 0.117 2009-Feb-28 23:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:16:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:17:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:17:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:17:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:17:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.002 0.913 1.054 1.054 2009-Feb-28 23:17:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.968 1.096 1.109 2009-Feb-28 23:17:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.983 1.008 1.071 2009-Feb-28 23:17:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.108 1.030 0.118 2009-Feb-28 23:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:18:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:18:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.911 1.053 1.055 2009-Feb-28 23:18:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.971 1.094 1.106 2009-Feb-28 23:18:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.977 1.009 1.067 2009-Feb-28 23:18:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.108 1.029 0.117 2009-Feb-28 23:18:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.908 1.047 1.049 2009-Feb-28 23:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.963 1.091 1.100 2009-Feb-28 23:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.975 1.007 1.064 2009-Feb-28 23:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.108 1.023 0.117 2009-Feb-28 23:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:20:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:20:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.907 1.045 1.051 2009-Feb-28 23:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.963 1.105 1.118 2009-Feb-28 23:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.976 1.006 1.061 2009-Feb-28 23:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.025 0.117 2009-Feb-28 23:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:20:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad) 2009-Feb-28 23:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-Feb-28 23:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.136 (still bad) 2009-Feb-28 23:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.147 (still bad) 2009-Feb-28 23:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.158 (still bad) 2009-Feb-28 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.151 (still bad) 2009-Feb-28 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.142 (still bad) 2009-Feb-28 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.134 (still bad) 2009-Feb-28 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:21:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:21:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.910 1.049 1.054 2009-Feb-28 23:21:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.963 1.091 1.108 2009-Feb-28 23:21:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.980 1.008 1.064 2009-Feb-28 23:21:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.024 0.117 2009-Feb-28 23:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:22:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:22:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.912 1.049 1.056 2009-Feb-28 23:22:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.967 1.091 1.107 2009-Feb-28 23:22:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.980 1.008 1.064 2009-Feb-28 23:22:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.108 1.031 0.118 2009-Feb-28 23:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:23:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:23:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:23:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.909 1.048 1.054 2009-Feb-28 23:23:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.967 1.091 1.107 2009-Feb-28 23:23:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.984 1.008 1.064 2009-Feb-28 23:23:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.024 0.118 2009-Feb-28 23:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:24:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:24:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.908 1.049 1.052 2009-Feb-28 23:24:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.967 1.090 1.105 2009-Feb-28 23:24:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.977 1.003 1.062 2009-Feb-28 23:24:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.108 1.023 0.117 2009-Feb-28 23:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:25:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad) 2009-Feb-28 23:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-Feb-28 23:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-Feb-28 23:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-Feb-28 23:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:25:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:25:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.909 1.050 1.052 2009-Feb-28 23:25:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.967 1.090 1.106 2009-Feb-28 23:25:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.976 1.013 1.070 2009-Feb-28 23:25:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.108 1.024 0.118 2009-Feb-28 23:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:26:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:26:20 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Feb-28 23:26:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:26:20 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Feb-28 23:26:20 LOG1 fixed_driftmap: New position: year = 2009.1642070372905 RA = 09:35:03.7 RA/Dec = 09:35:37.5 +23:33:37.7 2009-Feb-28 23:26:20 NOTE fixed_driftmap: Correcting ZA to 5:12:24.0 ... 2009-Feb-28 23:26:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.2066659680 -CF 2009-Feb-28 23:26:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-28 23:26:20 START begin_task: Starting task 'WAPP calibration' 2009-Feb-28 23:26:20 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Feb-28 23:26:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-28 23:26:20 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:26:20 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Feb-28 23:26:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:26:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:26:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:26:20 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:26:20 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Feb-28 23:26:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.2066659680 -CF 2009-Feb-28 23:26:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:26:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:26:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:26:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:26:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:26:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:26:21 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:26:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:26:21 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:26:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:26:21 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:26:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:26:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:26:21 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:26:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:26:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:26:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:26:21 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:26:21 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:26:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:26:21 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:26:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:26:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:26:21 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:26:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:26:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:26:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:26:21 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:26:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:26:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:26:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:26:21 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-28 23:26:21 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:26:21 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-28 23:26:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:26:21 INFO2 take_data: Starting WAPP 1-second scan: 905900271 2009-Feb-28 23:26:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:26:21 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Feb-28 23:26:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:26:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-28 23:26:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12382.00 2009-Feb-28 23:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:26:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:26:23 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:26:23 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:26:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:26:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:26:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:26:23 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:26:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:26:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:26:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:26:23 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:26:23 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-28 23:26:23 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-28 23:26:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:26:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-28 23:26:23 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Feb-28 23:26:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Feb-28 23:26:24 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Feb-28 23:26:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:26:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:26:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:26:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:26:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-28 23:26:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-28 23:26:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:26:24 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Feb-28 23:26:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-28 23:26:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:26:24 INFO2 take_data: Starting WAPP 600-second scan: 905900272 2009-Feb-28 23:26:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:26:24 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Feb-28 23:26:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:26:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:26:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-28 23:26:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12385.00 2009-Feb-28 23:26:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0002.fits 2009-Feb-28 23:26:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090228.a2010.0002.fits} 2009-Feb-28 23:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.554 (still bad) 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:26:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:26:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:26:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.909 1.046 1.052 2009-Feb-28 23:26:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.966 1.090 1.105 2009-Feb-28 23:26:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.980 1.006 1.063 2009-Feb-28 23:26:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.022 0.117 2009-Feb-28 23:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Feb-28 23:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:28:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:28:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.912 1.051 1.053 2009-Feb-28 23:28:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.965 1.088 1.100 2009-Feb-28 23:28:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.987 1.011 1.066 2009-Feb-28 23:28:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.108 1.025 0.117 2009-Feb-28 23:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:28:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:28:40 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:28:40.302 (seconds: 84520.302)!} 2009-Feb-28 23:28:40 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:28:40.302 (seconds: 84520.302)! 2009-Feb-28 23:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:28:41 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 84519.0 to 84520.0! 2009-Feb-28 23:28:42 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (84519.0 - 84521.0)! 2009-Feb-28 23:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:29:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:29:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 0.929 1.050 1.052 2009-Feb-28 23:29:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.961 1.088 1.096 2009-Feb-28 23:29:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.974 1.005 1.066 2009-Feb-28 23:29:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.023 0.117 2009-Feb-28 23:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:30:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:30:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.908 1.045 1.048 2009-Feb-28 23:30:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.959 1.089 1.101 2009-Feb-28 23:30:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.974 1.004 1.063 2009-Feb-28 23:30:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.108 1.026 0.117 2009-Feb-28 23:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Feb-28 23:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Feb-28 23:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Feb-28 23:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Feb-28 23:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Feb-28 23:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:31:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:31:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.912 1.047 1.048 2009-Feb-28 23:31:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.959 1.086 1.098 2009-Feb-28 23:31:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.975 1.006 1.064 2009-Feb-28 23:31:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.107 1.021 0.117 2009-Feb-28 23:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:32:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:32:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.908 1.044 1.047 2009-Feb-28 23:32:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.960 1.086 1.094 2009-Feb-28 23:32:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.974 1.004 1.060 2009-Feb-28 23:32:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.107 1.025 0.117 2009-Feb-28 23:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Feb-28 23:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Feb-28 23:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Feb-28 23:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:33:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:33:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.911 1.047 1.048 2009-Feb-28 23:33:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.965 1.092 1.101 2009-Feb-28 23:33:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.973 1.002 1.061 2009-Feb-28 23:33:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.107 1.024 0.117 2009-Feb-28 23:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:34:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:34:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.911 1.046 1.047 2009-Feb-28 23:34:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.960 1.085 1.099 2009-Feb-28 23:34:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.972 1.031 1.089 2009-Feb-28 23:34:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.024 0.117 2009-Feb-28 23:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:35:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:35:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.909 1.083 1.085 2009-Feb-28 23:35:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.968 1.083 1.101 2009-Feb-28 23:35:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.973 1.001 1.061 2009-Feb-28 23:35:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.107 1.020 0.117 2009-Feb-28 23:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Feb-28 23:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Feb-28 23:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Feb-28 23:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.149 (still bad) 2009-Feb-28 23:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.148 (still bad) 2009-Feb-28 23:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.144 (still bad) 2009-Feb-28 23:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.139 (still bad) 2009-Feb-28 23:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Feb-28 23:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Feb-28 23:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:35:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:36:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.904 1.049 1.048 2009-Feb-28 23:36:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.958 1.085 1.096 2009-Feb-28 23:36:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.970 1.002 1.058 2009-Feb-28 23:36:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.107 1.027 0.117 2009-Feb-28 23:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:36:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:36:25 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:36:25 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 LOG1 fixed_driftmap: New position: year = 2009.1642262085836 RA = 09:45:10.5 RA/Dec = 09:45:44.1 +23:33:32.4 2009-Feb-28 23:36:25 NOTE fixed_driftmap: Correcting ZA to 5:12:18.7 ... 2009-Feb-28 23:36:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.2051859223 -CF 2009-Feb-28 23:36:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-28 23:36:25 START begin_task: Starting task 'WAPP calibration' 2009-Feb-28 23:36:25 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-28 23:36:25 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:36:25 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:36:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:36:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:36:25 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:36:25 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.2051859223 -CF 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:36:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:36:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:36:25 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Feb-28 23:36:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:36:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:36:26 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:36:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:36:26 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:36:26 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:36:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:36:26 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:36:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:36:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:36:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:36:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:36:26 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:36:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:36:26 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:36:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:36:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:36:26 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:36:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:36:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:36:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:36:26 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:36:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:36:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:36:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:36:26 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-28 23:36:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:36:26 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-28 23:36:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:36:26 INFO2 take_data: Starting WAPP 1-second scan: 905900273 2009-Feb-28 23:36:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:36:26 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Feb-28 23:36:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:36:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-28 23:36:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12987.00 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:36:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:36:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:36:28 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:36:28 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:36:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:36:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:36:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:36:28 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:36:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:36:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:36:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:36:28 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:36:28 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-28 23:36:28 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-28 23:36:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:36:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-28 23:36:28 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Feb-28 23:36:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Feb-28 23:36:28 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Feb-28 23:36:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:36:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:36:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:36:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:36:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-28 23:36:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-28 23:36:29 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:36:29 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Feb-28 23:36:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-28 23:36:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:36:29 INFO2 take_data: Starting WAPP 600-second scan: 905900274 2009-Feb-28 23:36:29 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:36:29 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Feb-28 23:36:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.545 (still bad) 2009-Feb-28 23:36:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:36:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-28 23:36:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0003.fits 2009-Feb-28 23:36:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12990.00 2009-Feb-28 23:36:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090228.a2010.0003.fits} 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.545 (still bad) 2009-Feb-28 23:36:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:36:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:37:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:37:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.908 1.050 1.050 2009-Feb-28 23:37:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.961 1.088 1.099 2009-Feb-28 23:37:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.975 1.005 1.061 2009-Feb-28 23:37:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.107 1.023 0.117 2009-Feb-28 23:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Feb-28 23:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Feb-28 23:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-Feb-28 23:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:38:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:38:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.909 1.050 1.051 2009-Feb-28 23:38:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.966 1.089 1.103 2009-Feb-28 23:38:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.979 1.009 1.064 2009-Feb-28 23:38:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.108 1.024 0.117 2009-Feb-28 23:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:39:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:39:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.910 1.050 1.049 2009-Feb-28 23:39:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.960 1.087 1.096 2009-Feb-28 23:39:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.971 1.004 1.063 2009-Feb-28 23:39:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.107 1.024 0.117 2009-Feb-28 23:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.093 (still bad) 2009-Feb-28 23:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Feb-28 23:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-Feb-28 23:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Feb-28 23:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad) 2009-Feb-28 23:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Feb-28 23:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:40:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:40:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.913 1.044 1.042 2009-Feb-28 23:40:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.956 1.082 1.092 2009-Feb-28 23:40:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.971 1.000 1.059 2009-Feb-28 23:40:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.107 1.023 0.117 2009-Feb-28 23:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.092 (still bad) 2009-Feb-28 23:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.093 (still bad) 2009-Feb-28 23:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad) 2009-Feb-28 23:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:41:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:41:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.909 1.046 1.047 2009-Feb-28 23:41:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.956 1.086 1.097 2009-Feb-28 23:41:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.970 1.002 1.059 2009-Feb-28 23:41:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.108 1.024 0.118 2009-Feb-28 23:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.094 (still bad) 2009-Feb-28 23:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad) 2009-Feb-28 23:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-Feb-28 23:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.096 (still bad) 2009-Feb-28 23:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad) 2009-Feb-28 23:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad) 2009-Feb-28 23:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.095 (still bad) 2009-Feb-28 23:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:42:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-28 23:42:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.908 1.046 1.049 2009-Feb-28 23:42:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.957 1.086 1.098 2009-Feb-28 23:42:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.970 1.004 1.060 2009-Feb-28 23:42:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.107 1.025 0.117 2009-Feb-28 23:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad) 2009-Feb-28 23:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.097 (still bad) 2009-Feb-28 23:42:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.098 (still bad) 2009-Feb-28 23:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:43:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:43:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.906 1.045 1.046 2009-Feb-28 23:43:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.957 1.085 1.099 2009-Feb-28 23:43:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.973 0.998 1.058 2009-Feb-28 23:43:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.108 1.022 0.117 2009-Feb-28 23:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Feb-28 23:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Feb-28 23:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Feb-28 23:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:44:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.107 (still bad) 2009-Feb-28 23:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:44:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:44:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.916 1.045 1.047 2009-Feb-28 23:44:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.963 1.090 1.107 2009-Feb-28 23:44:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.977 1.003 1.062 2009-Feb-28 23:44:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.108 1.021 0.117 2009-Feb-28 23:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:45:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:45:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.907 1.047 1.047 2009-Feb-28 23:45:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.966 1.088 1.104 2009-Feb-28 23:45:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.979 0.999 1.062 2009-Feb-28 23:45:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.108 1.022 0.117 2009-Feb-28 23:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:46:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:46:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.911 1.052 1.050 2009-Feb-28 23:46:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.029 0.973 1.092 1.107 2009-Feb-28 23:46:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.981 1.006 1.068 2009-Feb-28 23:46:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.108 1.028 0.118 2009-Feb-28 23:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:46:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:46:30 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Feb-28 23:46:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:46:30 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Feb-28 23:46:30 LOG1 fixed_driftmap: New position: year = 2009.1642453798768 RA = 09:55:17.4 RA/Dec = 09:55:50.8 +23:33:27.3 2009-Feb-28 23:46:30 NOTE fixed_driftmap: Correcting ZA to 5:12:13.6 ... 2009-Feb-28 23:46:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.2037883601 -CF 2009-Feb-28 23:46:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-28 23:46:30 START begin_task: Starting task 'WAPP calibration' 2009-Feb-28 23:46:30 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Feb-28 23:46:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-28 23:46:30 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:46:30 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Feb-28 23:46:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:46:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:46:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:46:30 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:46:30 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.2037883601 -CF 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:46:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:46:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:46:30 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:46:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:46:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:46:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:46:31 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:46:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:46:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:46:31 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:46:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:46:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:46:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:46:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:46:31 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:46:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:46:31 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:46:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:46:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:46:31 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:46:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:46:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:46:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:46:31 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:46:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:46:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:46:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:46:31 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-28 23:46:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:46:31 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-28 23:46:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:46:31 INFO2 take_data: Starting WAPP 1-second scan: 905900275 2009-Feb-28 23:46:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:46:31 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Feb-28 23:46:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:46:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-28 23:46:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13592.00 2009-Feb-28 23:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:46:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:46:33 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:46:33 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:46:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:46:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:46:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:46:33 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:46:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:46:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:46:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:46:33 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:46:33 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-28 23:46:33 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-28 23:46:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:46:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-28 23:46:33 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Feb-28 23:46:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Feb-28 23:46:33 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Feb-28 23:46:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:46:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:46:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:46:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:46:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-28 23:46:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-28 23:46:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:46:34 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Feb-28 23:46:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-28 23:46:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:46:34 INFO2 take_data: Starting WAPP 600-second scan: 905900276 2009-Feb-28 23:46:34 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:46:34 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Feb-28 23:46:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:46:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.555 (still bad) 2009-Feb-28 23:46:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-28 23:46:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13595.00 2009-Feb-28 23:46:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0004.fits 2009-Feb-28 23:46:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090228.a2010.0004.fits} 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:46:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.555 (still bad) 2009-Feb-28 23:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:47:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:47:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.911 1.048 1.047 2009-Feb-28 23:47:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.966 1.091 1.106 2009-Feb-28 23:47:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.976 1.006 1.067 2009-Feb-28 23:47:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.108 1.035 0.117 2009-Feb-28 23:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Feb-28 23:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:48:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:48:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:48:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.910 1.046 1.046 2009-Feb-28 23:48:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.966 1.086 1.104 2009-Feb-28 23:48:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.979 1.004 1.062 2009-Feb-28 23:48:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.108 1.022 0.118 2009-Feb-28 23:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Feb-28 23:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Feb-28 23:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Feb-28 23:49:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:49:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.910 1.047 1.047 2009-Feb-28 23:49:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.965 1.088 1.105 2009-Feb-28 23:49:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.979 1.005 1.064 2009-Feb-28 23:49:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.108 1.023 0.117 2009-Feb-28 23:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Feb-28 23:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:50:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:50:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.910 1.046 1.045 2009-Feb-28 23:50:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.964 1.087 1.104 2009-Feb-28 23:50:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.980 1.005 1.065 2009-Feb-28 23:50:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.108 1.023 0.117 2009-Feb-28 23:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Feb-28 23:51:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:51:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.912 1.047 1.048 2009-Feb-28 23:51:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.969 1.090 1.101 2009-Feb-28 23:51:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.979 1.004 1.066 2009-Feb-28 23:51:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.108 1.022 0.117 2009-Feb-28 23:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad) 2009-Feb-28 23:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Feb-28 23:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-Feb-28 23:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-Feb-28 23:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Feb-28 23:51:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.108 (still bad) 2009-Feb-28 23:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Feb-28 23:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:52:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Feb-28 23:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.146 (still bad) 2009-Feb-28 23:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.157 (still bad) 2009-Feb-28 23:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.165 (still bad) 2009-Feb-28 23:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.165 (still bad) 2009-Feb-28 23:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.146 (still bad) 2009-Feb-28 23:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad) 2009-Feb-28 23:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:52:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:52:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.908 1.047 1.050 2009-Feb-28 23:52:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.965 1.101 1.111 2009-Feb-28 23:52:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.979 1.025 1.087 2009-Feb-28 23:52:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.108 1.021 0.117 2009-Feb-28 23:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-Feb-28 23:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Feb-28 23:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Feb-28 23:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Feb-28 23:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:53:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:53:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.909 1.047 1.047 2009-Feb-28 23:53:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.966 1.088 1.098 2009-Feb-28 23:53:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.977 1.005 1.064 2009-Feb-28 23:53:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.108 1.020 0.117 2009-Feb-28 23:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Feb-28 23:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Feb-28 23:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:54:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Feb-28 23:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:54:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.912 1.048 1.051 2009-Feb-28 23:54:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.965 1.089 1.105 2009-Feb-28 23:54:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.975 1.004 1.064 2009-Feb-28 23:54:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.108 1.023 0.117 2009-Feb-28 23:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad) 2009-Feb-28 23:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:55:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:55:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.910 1.049 1.051 2009-Feb-28 23:55:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.965 1.095 1.109 2009-Feb-28 23:55:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.982 1.008 1.066 2009-Feb-28 23:55:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.108 1.027 0.118 2009-Feb-28 23:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:56:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:56:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:56:35 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Feb-28 23:56:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:56:35 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Feb-28 23:56:35 LOG1 fixed_driftmap: New position: year = 2009.1642645511699 RA = 10:05:24.2 RA/Dec = 10:05:57.4 +23:33:22.6 2009-Feb-28 23:56:35 NOTE fixed_driftmap: Correcting ZA to 5:12:08.9 ... 2009-Feb-28 23:56:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.2024759939 -CF 2009-Feb-28 23:56:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-28 23:56:35 START begin_task: Starting task 'WAPP calibration' 2009-Feb-28 23:56:35 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Feb-28 23:56:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-28 23:56:35 START begin_task: Starting task 'selecting calibration type' 2009-Feb-28 23:56:35 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Feb-28 23:56:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-28 23:56:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-28 23:56:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:56:35 START begin_task: Starting task 'waiting on setcal' 2009-Feb-28 23:56:35 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.2024759939 -CF 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:56:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-28 23:56:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-28 23:56:36 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-28 23:56:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:56:36 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-28 23:56:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:56:36 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-28 23:56:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:56:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:56:36 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:56:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-28 23:56:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-28 23:56:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:56:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-28 23:56:36 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-28 23:56:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-28 23:56:36 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-28 23:56:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-28 23:56:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-28 23:56:36 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-28 23:56:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-28 23:56:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-28 23:56:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:56:36 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:56:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-28 23:56:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:56:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:56:36 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-28 23:56:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:56:36 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-28 23:56:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:56:36 INFO2 take_data: Starting WAPP 1-second scan: 905900277 2009-Feb-28 23:56:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:56:36 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Feb-28 23:56:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:56:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-28 23:56:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14197.00 2009-Feb-28 23:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:56:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-28 23:56:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-28 23:56:38 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-28 23:56:38 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-28 23:56:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-28 23:56:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-28 23:56:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-28 23:56:38 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-28 23:56:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-28 23:56:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-28 23:56:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-28 23:56:38 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-28 23:56:38 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-28 23:56:38 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-28 23:56:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-28 23:56:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-28 23:56:38 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Feb-28 23:56:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Feb-28 23:56:38 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Feb-28 23:56:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:56:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:56:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:56:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Riccardo, Shan 2009-Feb-28 23:56:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-28 23:56:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-28 23:56:39 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-28 23:56:39 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2009-Feb-28 23:56:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-28 23:56:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-28 23:56:39 INFO2 take_data: Starting WAPP 600-second scan: 905900278 2009-Feb-28 23:56:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-28 23:56:39 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Feb-28 23:56:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Riccardo, Shan' 2009-Feb-28 23:56:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-28 23:56:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-28 23:56:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14200.00 2009-Feb-28 23:56:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20090228.a2010.0005.fits 2009-Feb-28 23:56:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090228.a2010.0005.fits} 2009-Feb-28 23:56:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:56:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.396 1.252 1.452 1.452 2009-Feb-28 23:56:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.436 1.347 1.529 1.530 2009-Feb-28 23:56:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.558 1.383 1.416 1.435 2009-Feb-28 23:56:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.323 0.108 1.463 0.118 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1150.000000 MHz 2009-Feb-28 23:56:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Feb-28 23:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:57:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:57:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.913 1.052 1.052 2009-Feb-28 23:57:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.965 1.090 1.101 2009-Feb-28 23:57:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.975 1.003 1.064 2009-Feb-28 23:57:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.026 0.117 2009-Feb-28 23:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:58:38 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:58:38.294 (seconds: 86318.294)!} 2009-Feb-28 23:58:38 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:58:38.294 (seconds: 86318.294)! 2009-Feb-28 23:58:39 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 86317.0 to 86318.0! 2009-Feb-28 23:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:58:40 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (86317.0 - 86319.0)! 2009-Feb-28 23:58:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:58:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.913 1.058 1.059 2009-Feb-28 23:58:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.964 1.091 1.102 2009-Feb-28 23:58:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.978 1.005 1.066 2009-Feb-28 23:58:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.108 1.026 0.118 2009-Feb-28 23:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:58:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Feb-28 23:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Feb-28 23:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:59:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-28 23:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Feb-28 23:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Feb-28 23:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Feb-28 23:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Feb-28 23:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Feb-28 23:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Feb-28 23:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Feb-28 23:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Feb-28 23:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Feb-28 23:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Feb-28 23:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad) 2009-Feb-28 23:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.135 (still bad) 2009-Feb-28 23:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.141 (still bad) 2009-Feb-28 23:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.142 (still bad) 2009-Feb-28 23:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.138 (still bad) 2009-Feb-28 23:59:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Feb-28 23:59:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.914 1.049 1.052 2009-Feb-28 23:59:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.968 1.120 1.131 2009-Feb-28 23:59:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.978 1.004 1.066 2009-Feb-28 23:59:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.108 1.025 0.118 2009-Feb-28 23:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Feb-28 23:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Feb-28 23:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Feb-28 23:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Feb-28 23:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-Mar-01 00:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-Mar-01 00:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Mar-01 00:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-Mar-01 00:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Mar-01 00:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Mar-01 00:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Mar-01 00:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Mar-01 00:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Mar-01 00:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Mar-01 00:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:00:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:00:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 0.917 1.055 1.058 2009-Mar-01 00:00:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.968 1.092 1.105 2009-Mar-01 00:00:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.979 1.010 1.074 2009-Mar-01 00:00:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.108 1.029 0.117 2009-Mar-01 00:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad) 2009-Mar-01 00:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-Mar-01 00:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:01:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.916 1.054 1.059 2009-Mar-01 00:01:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.969 1.095 1.105 2009-Mar-01 00:01:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.981 1.006 1.071 2009-Mar-01 00:01:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.108 1.028 0.118 2009-Mar-01 00:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-Mar-01 00:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:02:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-01 00:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-Mar-01 00:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-Mar-01 00:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:02:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 0.914 1.052 1.058 2009-Mar-01 00:02:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.969 1.093 1.108 2009-Mar-01 00:02:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.982 1.006 1.068 2009-Mar-01 00:02:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.108 1.026 0.118 2009-Mar-01 00:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Mar-01 00:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Mar-01 00:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 00:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 00:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-Mar-01 00:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 00:03:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:03:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.914 1.054 1.056 2009-Mar-01 00:03:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.974 1.092 1.111 2009-Mar-01 00:03:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.984 1.006 1.067 2009-Mar-01 00:03:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.108 1.025 0.118 2009-Mar-01 00:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Mar-01 00:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-Mar-01 00:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-Mar-01 00:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:04:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.910 1.051 1.058 2009-Mar-01 00:04:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.969 1.092 1.110 2009-Mar-01 00:04:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.983 1.005 1.064 2009-Mar-01 00:04:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.108 1.025 0.117 2009-Mar-01 00:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-Mar-01 00:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 00:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-Mar-01 00:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-Mar-01 00:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-Mar-01 00:05:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.912 1.054 1.057 2009-Mar-01 00:05:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.972 1.096 1.107 2009-Mar-01 00:05:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.998 1.008 1.066 2009-Mar-01 00:05:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.108 1.025 0.117 2009-Mar-01 00:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-01 00:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-Mar-01 00:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-Mar-01 00:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-Mar-01 00:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-Mar-01 00:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-Mar-01 00:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-Mar-01 00:06:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-01 00:06:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-01 00:06:40 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-01 00:06:40 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 LOG1 fixed_driftmap: New position: year = 2009.1642837224631 RA = 10:15:31.1 RA/Dec = 10:16:04.1 +23:33:18.2 2009-Mar-01 00:06:40 NOTE fixed_driftmap: Correcting ZA to 5:12:04.5 ... 2009-Mar-01 00:06:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.2012513867 -CF 2009-Mar-01 00:06:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Mar-01 00:06:40 START begin_task: Starting task 'WAPP calibration' 2009-Mar-01 00:06:40 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-01 00:06:40 START begin_task: Starting task 'selecting calibration type' 2009-Mar-01 00:06:40 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-01 00:06:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-01 00:06:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 00:06:40 START begin_task: Starting task 'waiting on setcal' 2009-Mar-01 00:06:40 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.2012513867 -CF 2009-Mar-01 00:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-01 00:06:40 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-01 00:06:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-01 00:06:40 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Mar-01 00:06:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-01 00:06:40 LOG2 socket_wait: Start